Exam HP0-J12 study material Made available by Testkingprep.com
Free HP0-J12 Exam Preparation Questions Exam HP0-J12: Supporting ESL E-Series and EML E-Series Libraries
For Latest HP0-J12 Exam Questions and study guides- visit- http://www.testkingprep.com/HP0-J12.html
Question:1 How many cartridge slots can be used in an 8U drive expansion module mounted at the bottom of an EML E-Series library? A. 48 B. 87 C. 94 D. 103 Answer: B Question:2 What is reported by the LP/PNL sensor of an ESL E-Series tape library? A. library door status B. x-axis motor position C. y-axis motor position D. magazines and load ports status Answer: D Question:3 How many connections to the AC failover box does each drive cluster have in an ESL E-Series tape library? A. 1 B. 2 C. 3 D. 4 Answer: A Question:4 Which ESL E-Series tape library operations require CommandView TL? A. Licensing and Interface Manager configuration B. Basic and Advanced Secure Manager configuration C. Licensing and Advanced Secure Manager configuration D. Interface Manager and Advanced Secure Manager configuration Answer: C Question:5 What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface to? A. tape devices B. library robotics C. management interface card D. e2400-160 Interface Controller Answer: B Question:6 A customer needs a library with a minimum of 120TB capacity and an expected compression ratio of 2:1. Which libraries most economically meet the customer's needs? (Select two.) A. EML 103e with LTO3 tape drives B. EML 245e with LTO2 tape drives C. EML 245e with LTO3 tape drives D. EML 442e with LTO2 tape drives E. EML 442e with LTO3 tape drives Answer: C, D Question:7
For Latest HP0-J12 Exam Questions and study guides- visit- http://www.testkingprep.com/HP0-J12.html
The EML E-Series libraries perform a calibration cycle at power on. Which component is used for position calibration? A. bar code reader B. calibration cam C. calibration sensor D. end position sensors on each axis and servo motors Answer: A Question:8 How often is the CommandView TL Health Summary screen updated? A. every 30 seconds B. at 15-minute intervals C. whenever the library status changes D. configurable to any value up to 900 seconds Answer: C Question:9 Which hardware and software products are needed to manage, monitor, and configure EML E-Series tape libraries? A. CommandView TL B. CommandView TL, Windows Host C. CommandView TL, Secure Manager D. CommandView TL, Library Tape Tools, Windows Host Answer: B Question:10 Which functionality does the Interface Manager mode provide on an EML E-Series tape library when it is set to automatic? (Select two.) A. It automatically restarts the library when replacing an Interface Controller. B. When replacing the robotics unit, it automatically starts a calibration cycle. C. When creating partitions, it provides slot and tape device sharing between the virtual libraries. D. It ensures that the library is configured correctly and consistently across all Interface Controllers. E. When replacing an Interface Controller, it maintains awareness of consistent firmware and device maps. Answer: D, E
For Latest HP0-J12 Exam Questions and study guides- visit- http://www.testkingprep.com/HP0-J12.html
For complete Exam HP0-J12 Training kits and Self-Paced Study Material Visit: http://www.testkingprep.com/HP0-J12.html
http://www.testkingprep.com/
For Latest HP0-J12 Exam Questions and study guides- visit- http://www.testkingprep.com/HP0-J12.html