1
2
3
4
Contents
04 07 37 46 60
Profile Product Design Graphic Design 3D Modeling Photography
5
6
Basic Info.
Experience
許力文 Li-Wen Hsu
TEDxTainan 攝影師 (2016-2017)
+886 919459489
成大陶藝泥巴社 影記 (2018-)
strength622@gmail.com
108 級畢業設計多媒組長 (2018-)
參與 IKEA Workshop (2017)
國立成功大學 工業設計系 108 級
Department of Industrial Design National Cheng Kung University
Internship
Skill
小寶優居 B.House 暑期實習生 (2017)
Modeling / Product Development
7
8
Product Design 01 IKEA Case：UNIBO
9
UNIBO
Background Unlike foreign countries, the proportion of hanging clothes in balconies and other indoor space in Taiwan is very high. But, many households’ clothes hanging spaces are not well-designed, leading to bad clothes hanging experience and much inconvenience.
Interview By cooperating with IKEA, we got the chance to visit some households that hanging clothes indoor. We observed their clothes hanging space, procedure of doing laundry, and ask about their problem they encounter during doing laundry and hanging clothes
10
11
Problems After observing each households’ clothes hang space, we discovered that the clotheshorses do not fit with the clothes hanging room in most households. Some households’ balconies are too narrow, so clotheshorses on the market are too short for them; some households’ balconies are wide and short, so clotheshorses on the market are too narrow for them. To sum up, they can not find the clotheshorse totally fit their balcony on the market.
12
Insights After visiting some households, we got some insights: Adapting to different spaces Like to D.I.Y Clotheshorse on the market can not fit their space
Purpose By clarifying users’ problems and marketing insights, we set the goal of developing a clotheshorse which can adapt to various spaces.
Key After consideration, we believed that “modularization” can be the solution. Because modulizing the clotheshorse can make users assemble clotheshorse to the length and width they want at their pleasure. And users also can have fun during assembling.
13
Sketch We divided a clotheshorse into several parts, and user can assemble a clotheshorse which fits user’s needs with these parts.
14
Modularization We divided a clotheshorse into several parts, and user can assemble a clotheshorse which fits their needs with these parts.
15
Modeling We first modeling our product in Solidworks, and print it out by the 3D printer. Then, we polished each part and spray paint them.
16
Prototype
17
Scenario UNIBO can adapt to various space. Users can assemble the clotheshorse which fit their room by themselves.
18
19
20
Product Design 02 Umbrella Dryer
21
ETISIC Background Taiwan is a wet and rainy country. After getting indoor with a wet umbrella in rainy days, drying and storage an umbrella are common problems. People usually drying an umbrella by opening it and laying it on the floor. But this way not only interferes the usage of the space, but also makes the floor wet, might leading to the potential hazard of slipping.
Survey & purpose Although there are already some umbrella dryer on the market, most of them are designed for department store or some public space, and can not fit with folding umbrellas. So the purpose of design is to design a umbrella dryer for family, and can be suitable for either stick umbrellas or folding umbrellas.
22
23
Sketch After having so many sketches, in the end, I decided to develop the last idea below, although it was the most imaginative idea.
24
Modification By cooperating with IKEA, we got the chance to visit some households that hanging clothes indoor. We observed their clothes hanging space, procedure of doing laundry, and ask about their problem they encounter during doing laundry and hanging clothes
25
Final product The product is called "Etisic", which takes from the words "good' and "dry" in Latin , hoping to give user a good drying experience. And the side of the product looks like an "E" ,which is the first alphabet of Etisic.
26
27
Scenario & Product instruction
28
29
30
Internship in B.House Coffee table design
31
B.House Intern
Introduction B. House is a Furniture planning company in Yo n g k a n g , Ta i n a n . I n B . House, you can purchase furniture, and let the furnuture planner design the room for you.
Coffee table design In the last month of the intership in B.House, we started in product development. The product I choosed is "coffee table", because I believed that livingroom is the most important space for a family spending time with others. And there are features of the coffee table: large space for storage, stools can be neatly put in the coffee table.
32
33
34
35
36
Graphic Design Be Cool and Creative !
37
38
ID Camp T-shirts
"Harder we study, less liver we have." The character is the Egyptian deities with bird head,replacing head by liver, sceptre by pen. As the pen getting bigger, means we study harder, and our livers getting less. 39
六之飲
六之飲 is an eastern tea house. It's name takes from the sixth chapter of The Classic of Tea Lu, Yu. 六之飲 makes eastern tea calture modernize. Drinking tea is no more an inconvenient and unfashionable thing. People in here can do what ever they can do in a cafe', like reading, chatting or just taste tea casualy. 40
41
42
43
44
45
46
3D Modeling Work? No, serious play!
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Photography Memories fade away ; photos are not.
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80