SunMaxx IntelliMaxx-DC Controller
StorMaxx SE Storage Tanks SUPERIOR PERFORMANCE Oversized 1.5 inch diameter solar coil for maximum exchange efficiency. 2 inch CFC free foam insulation which creases standby heat loss.
EXCEPTIONAL VERSATILITY Includes a back up electric element. Can act as a stand alone solar water heater or as a pre-heat tank for a solar system
ENDURING RELIABILITY Durable porcelain enamel, glass lined tank. Hand crafted from heavy gauge steel. Two magnesium anode rods included to inhibit corrosion and maximise tank life
An Investment with Real Returns SunMaxx StorMaxx SE Solar Tank water heaters, offer a cost-effective water heating alternative. These tanks include a back-up electric element, which allows for the versatilty of a stand alone solar water heater, or pipe it in as a pre-heat solar system. The StorMaxx SE is a durable porcelain enamel, glass-lined tank. Highly resistant to aggressive water. Not susceptible to damage due to the presence of chloride in the water. Built to last - Inner tank is hand-crafted from heavy gauge steel. Longer life equals a higher “Return on Investment”.Outer jacket made from steel and powder coated for a lasting, durable finish.
Features: • • • • • • • • • •
4500W Electric back-up Element - UL listed. Factory installed T&P valve - CSA listed. Factory installed brass drain valve - accessible, tamper-proof. 2” Non-CFC foam insulation - decreases standby heat loss. 1-1/2” coil diameter- larger diameter, results in higher recovery and less pressure drop through the coil, smooth surface on coil resists lime build up. Sediment reduction inlet - available on the SE-80 and SE-119. Reduces sediment buildup on the tank bottom, increasing operating efficiencies and tank life. Two magnesium anode rods -Inhibit corrosion and maximize tank life. Electrolysis attacks the anode rods, not the tank. Factory installed dielectric nipples on boiler connections - provides greater insulating protection. 7 year limited warranty - on tank and coil heat exchanger. 3 year limited warranty - on tank and coil heat exchanger in all commercial installations. StorMaxx SE-50-1HX-EE
StorMaxx SE-80-1HX-EE
StorMaxx SE-119-1HX-EE
50/190
80/300
119/450
First Draw (gal)
40
70
102
Heat Source Friction Loss* (ft.w.c)
3.4
3.5
3.5
180° F 8 GPM**
180 @ 89,000
233 @104,000
265 @ 104,000
180° F 10 GPM**
190 @ 96,000
245 @ 111,000
277 @ 111,000
180° F 14 GPM**
MODEL Capacity (gal / liters)
FIrst Hour Rating (gal) @Coil Output (Btu/hr)
205 @ 105,000
259 @ 120,000
291 @ 120,000
200° F 8 GPM**
221 @ 115,000
277 @ 132,000
309 @ 132,000
200° F 10 GPM**
233 @ 123,000
292 @ 141,000
324 @ 141,000
200° F 14 GPM**
250 @ 134,000
314 @ 155,000
346 @ 155,000
All data obtained through testing in accordance with: GAMA INDIRECT_FIRED WATER HEATER TESTING STANDARD IWH-T8-1_MARCH 2003 * At 14 GPM ** Coil Input (temperature, flow rate) Ratings based on 77°F rise with 58°F inlet potable water
SunMaxx Solar 56 Broome Corp. Pkwy, Conklin, NY 13748 | 1.877.786.6299 1.800.786.0329 fax | www.sunmaxxsolar.com © 2010 SunMaxx Solar, Inc. Specifications subject to change without notice.