heper_moonlight_catalog

Page 1

a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10


a u .

m o c

. e d

a r nt

w

u s . w

w

General Information

Heper + Moonlight reserves the right to change at any time and without prior warning the technical specification of any product in this catalogue. No part of this catalogue may be copied without a written authorisation of Heper + Moonlight. The luminaires in the catalogue are designed and patented by Heper + Moonlight. The secondary reflector systems are patented by Bartenbach Lichtlabor and manufactured by Heper + Moonlight under the licience of Bartenbach Lichtlabor. Unless specially indicated, the luminaires are supplied without lamps. All dimensions are in millimetres. Voltages given refer to main frequency of 50/60 Hz. All electrical equipment is installed in accordance with IEC regulations. Heper + Moonlight lighting systems have been extensively developed to meet the exacting demands of Light Pollution requirements. The standard finishing of the products are specified in the product description. The products can also be finished in RAL colours on request subject to availability.

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

w

w

u s . w

EN ISO 9001-2000 Heper + Moonlight has implemented a Quality Management System, which is essential to ensure continuous improvement of all aspects of its operations, organization, production process and customer service. ENEC The fixtures are KEMA tested and carry the ENEC (European Norms Electrical Certification) sign. ENEC titles the agreement on the use of a commonly agreed mark of conformity for luminaires and relevant components complying with European Standards. The purpose is to grant a common European mark on the basis of applicable European standards and to strive for elimination of existing special national conditions and national deviations, valid in the countries of the ENEC Signatories. EN 60598-1 -2 The technical features of our fixtures conform to regulations of EN60598-1-2. Our packing, installation instructions and delivery documents are labelled with the CE sign. GOST-R Heper + Moonlight fixtures are in compliance with GOST-R (Russian Federation Standards)

3


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


BARTENBACH DEVELOPMENTS WITH HEPER+MOONLIGHT Research and Development An interdisciplinary approach is taken by Bartenbach team of engineers and scientist for a wide range of tasks for Heper + Moonlight: √ √ √ √ √ √

Development of luminaires Development of secondary reflector systems Development optical systems for road lighting Photometric measurements and computations Studies and appraisals Research projects

a u .

Luminaire development The development of the luminaire starts with the initial idea and follows throughconceptanddetaileddevelopment(opticalsystems,reflectors, etc.) to the support of Heper + Moonlight up the prototyping and preproduction samples.

m o c

. e d

A number of patented lighting technologies have been used such as the “spots and mirrors” technique.

a r nt

w

w

u s . w

LEDs represent another focal point of the future design efforts since they offer many opportunities but also challenges as a light source for general lighting. Research projects provide the know how that is then implemented in many development projects commissioned by Heper + Moonlight. Measurements Photometric tests such as measuring the polar curve of luminaires, the optical characteristics of certain materials, luminance measurements using cameras etc. are done in Bartenbach laboratories. Design Concept The experts at Bartenbach LichtLabor focus on the design of lighting concepts and systems utilizing both natural and artificial lighting from the initial concept right through to site supervision. "Not from the luminaire to the overall ambience but from the desired effect to the lighting concept using the findings in perception psychology. And then applying physics and photometry to arrive attheoptimalluminairetyperespectivelylighting system." Prof. Christian Bartenbach

5


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Experience Innovation

Heper + Moonlight is a pioneer in professional lighting specializing in fixtures for interiorandexteriorarchitecturalapplications,withlightingdevelopmentservices includingmechanicalandelectricalengineeringresources,productdevelopment capabilities and design experience. Behind the aesthetic beauty, Heper + Moonlight fixtures are advanced electrical components that ensure reliable operation and totally automated lighting systems. Using the latest innovative light sources to ensure a high degree of efficiency, Heper + Moonlight has a reputationforintegrity,reliabilityinlightingmarketplacewithexceptionalquality, outstanding after sales service and advanced technology. For interior and exterior lighting applications Heper + Moonlight offers comprehensive product ranges with supporting services. Also our flexibility and capability in manufacturing interior and exterior luminaires meets customer specifications and architectural designs.

a u .

m o c

. e d

w

a r t Study For Research n u s . w w

Heper + Moonlight Research & Development Department is a dynamic, growing centre, focused on the development of radical new technologies that span a diverse set of applications. Our team is comprised of engineering, manufacturing and quality professionals dedicated to creating innovative solutions for advanced technologies such as complex surface facet design. The Heper + Moonlight team focus on the complete development process, from design concept to low volume manufacturing runs, to designing advanced lighting systems, more accurate, and more functional than the products they are replacing. Heper + Moonlight technology, and the products which incorporate this technology, are improving lives and places around the world.

7


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

w

w

u s . w

Philosophy Founded in 1994 “lighting� has become a way of life for Heper + Moonlight. Leading Designs Our engineering group uses the latest design and modeling software to ensure the outstanding optical performance as well as the best overall durability of our luminaires. Test of Quality Our success relies on the quality of our product development process. All products are individually tested which are necessary for successful usage. Special Solutions Heper + Moonlight offers complete design and production services beginning with your idea to the completed product. Product Sales With a product range sold throughout over 30 countries worldwide, Heper + Moonlight is the supplier for all professional outdoor lighting needs. Project Design & Installation Heper + Moonlight designs new lighting systems, as well as renovating existing systems, to give them renewed life and flexibility. We examine the end-user's objectives and intended use of the venue, help establish the lighting system parameters and lighting requirements, and provide detailed information. Product Our products contribute to a more pleasant way of life for people wherever and whenever they come together.

9


INDEX

MIRAGE

18-31

FUTURA

80-85

FIERO

32-39

TRIO

86-89

NOVA

40-43

TECNA

90-93

DIVA

ULTRA

a r nt

. e d

48-53

m o c

94-99

METROPOLITAN

100-105

54-57

IMPERIAL

106-111

BISLEY

58-61

RITMO

112-117

CITY

62-67

LOFT

118-121

SIENA

68-71

UNO

122-127

URBIS

74-79

QUADRATO

128-131

u s . w

w

OLYMPIC

w

10

MERLOT

44-47

a u .

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


INDEX

VENERA

132-135

TERRA

VENERA MEGA

136-137

ART

VISTA

138-143

LEGEND

180-185

186-189

190-193

a u .

COOL

194-197

FOCUS

198-201

156-161

IGNIS

202-205

ALPHA

162-167

ALBUS

206-209

REGAL

168-171

AURA MEGA

212-213

SANTA

172-175

ERA

214-215

LUNA

216-217

VISTA VERSUS

144-149

a r nt

ANGORA

150-155

u s . w

w

STUDIO

w

SANTA VERSUS

. e d

176-179

m o c

11


INDEX

DIGNA

218-219

SIWA

238-239

AURA MINI

220-221

FUGA

240-241

ERA MINI

222-223

ATOS

242-243

LUNA MINI

224-225

DIGNA MINI

u s . w

VISTA VERSUS MINI

244-245

RING

246-247

m o c

. e d

a r nt

226-227

w

228-229

URBIS WALL

250-251

DIZZY

230-231

FUTURA WALL

252-255

TROLI

232-233

FUTURA PENDANT

256-257

ESSE

234-235

TRIO PENDANT

258-261

ORION

236-237

SELGE DOWNLIGHT

262-265

STILE

w

12

a u .

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


INDEX

SELGE WALL

266-269

MILET

285

SELGE WALL LED

267-269

VIVA

286

SELGE MINI WALL

270-273

TERRA WALL

287

SELGE MINI WALL LED

271-273

ZEN

STELA

a u .

ROSSE

288

VELA

289-291

m o c

a r nt

. e d

274-275

u s . w

276-277

MILENA

292

ARIS

278-279

VETRO

293

VIGOR PRO

280-283

DORA

294-295

SAVO

281-283

ZERO

298

PERGE

284

ALTUS

299

w

w

13


INDEX

CARPI

300-303

SOLO

324-325

DION

301-303

JAZZ

326-327

WEDGE

304-305

ZOOM

DELTA

u s . w

w

m o c

. e d

a r nt

306-307

SLIM LINE RECESSED SERIES 308-313

14

ZOOM SPIKE

306-307

DELTA FRAME

w

a u .

BETTA

ZOOM LED

328-329

330-331

332-333

334-335

AQUA PRO

316-317

AQUA PROLED

336-339

LOTTO

318-319

ZENIT PRO

340-343

ICE

320-321

REFLECTIONS

344-345

LINEA

322-323

POLES

346-355

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

15


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

Pole Luminaires

It is clear that exterior lighting makes a dramatic first impression. Combining aesthetic detailing, die-cast aluminium production range provides innovative illumination for urban and residential areas. The poles are available with base plates and anchorage sets, also in ground buried and in different heights and diameters. Heper + Moonlight pole luminaires are resistant to high wind and offer considerable resistance to atmospheric agents. The poles are available in galvanized steel or aluminium with corrosion resistant diecast aluminium arms and brackets etc.

17


MIRAGE

a u .

m o c

. e d

a r nt

u s . w

w

w

18

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Road Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

mirage

w

w

19


Design The design language explored in MIRAGE is the fusion of unique streaming surfaces which creates an aerodynamic form for road lighting. The form is convenient for even harsh weather conditions and strong wind. Fluidity and futurism are conceptual terms that best describe the appearance of MIRAGE. Its complex curvilinearity surrounds a semisphere forming a swift shell for the lighting module. Designed by: Altera Design Studio

a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


n

Optimized Reflector速 Multi Facetted Innovative Optimized Reflector速 Each Is Calculated Separately With A Complex Mathematical Procedure High Performance And Durability Controlled Beam

m o c

. e Precise Lighting Control d a r MaximumtSpacing - Minimum Maintenance n u Compability With The Latest Generation .s w Discharge Lamps

w

w

a u .

Lamp Options From 250w To 400w Fulfilling The New European Standard En 13201, Class Me1 Optimal Performance With a Glare - Free, Uniform Lighting Distribution Flexibility Of Wide Range Of Light Source Applications Ideal For Major Traffic Roads, Motorways, Town And City Streets, Crossings And Roundabouts.

21


Main Applications Ideal for Motorways, Major Traffic Roads, Minor Roads, Town and City Streets, Industrial Areas, Crossings, Roundabouts

Mounting Pole top or bottom entry Mounting height 6m-12m

a u .

Control gear Included

m o c

. e d

a r nt

Control gear mounting Integral

w

u s . w

w

Compliance EN 60598-1 EN 60598-2-3 EN 13201

Materials Die cast aluminium optical assembly. Subjected to chromate treatment. All screws are made of stainless steel.

Weight Weight 12 Kg (excluding electrical components).

22

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Reflector type Optimized ReflectorÂŽ IP High quality sealing system Optical compartment: IP 66 Control gear: IP 66

Electrical Nominal voltage: 230 V – 240V Lamp type: HST Lamps: 250W-400W

a u .

m o c

. e d Insulation Class

a r nt

u s . w

Electrical class: Class I (standard) - Class Il (on request)

w

w

Operation and maintenance No tools are required for routine maintenance. Direct access to the lamp. The various wiring components (lamp, ignitor, ballast, condenser, etc) can be replaced individually. Automatic power cut off for safety.

Finish Colour Black, grey and dark grey colours standard. RAL colours upon request. (Lower housing Upper canopy)

23


MIRAGE

a u .

m o c

. e d

a r nt

u s . w

w

w

24

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Road Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

25


MIRAGE

a u .

m o c

. e d

a r nt

u s . w

w

w

26

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Road Lighting Systems

Housing

Corrosion resistant die-cast aluminium optical housing lower and upper canopy with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components. Relamping without using any tool. Toolless maintenance through the safety hinged canopy and easily removed gear tray. Post-top or side entry mounting options. Toughened flat clear glass can be hanged out & in and high heat resistance in Mirage luminaires.

Optical

Multi facetted innovative Optimized Reflector® each is calculated separately with a complex mathematical procedure. Optimized Reflector for NAV-T 250W / 400W fulfilling the highest new European Standard EN 13201, Class ME1.

a u .

Class ME1: Its appliance is only in roads with the following criteria: Speed > 60km/h with high traffic, many crossings and conflict zones (crossings with other traffic flows, pedestrians, bicycles).

Roads with medium traffic require class ME4a, ME4b, and ME5.

m o c

. e d

On most high traffic roads the classes ME3a to ME3c will satisfy the EN 13201.

a r nt

Optimized Reflector developed with Bartenbach. The theoretical Light - Distribution is strictly calculated, which fulfils ME1 with many different geometries (width of read, height and distance of light poles).

u s . w

Also lower classes have been fulfilled efficiently, e.g. with larger distances of the light poles and less power.

w

w

Calculation of the shape of the reflector is complicated which is divided into several facets, each is calculated separately with a complex mathematical procedure. Full cut-off optical system anodized and polished, 99.90% aluminium. Optical system with tempered flat glass complies with the Light Pollution requirements.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. IP.66 for lamp and control gear. Electrical Insulation: CLASS I and Class II (Optional) The system complies with European standards EN13201&EN60598 and ENEC marked.

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Dark grey standard. RAL colours upon request.

27


a u .

m o c

. e d

a r nt

u s . w

w

w

PHOTOMETRIC RESULT OF LARGE SYSTEM Optimal Geometry (maximum possible distance) incl. Maintainance- Factor 0.64

250 W

400 W

Class

h (m)

a (m)

b (m)

a:h

Class

h (m)

a (m)

b (m)

a:h

ME1

8.0

26

9

3.3

ME1

10.0

35

9

3.5

ME3a

10.5

35

>12

3.3

ME3a

13.0

50

>12

3.8

ME3c

10.0

40

>12

4.0

ME3c

13.0

55

>12

4.2

H Height of pole a Distance between pole b Max. width of road

28

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

0101 0102 0103 0104

250 W HST E40 400 W HST E40 250 W HIT E40 400 W HIT E40

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

304

Poles

Code

Material

21312 21314 21315

GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE

Height

10000 11000 12000

29


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

31


FIERO

a u .

m o c

. e d

a r nt

u s . w

w

w

32

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Road Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

fiero

w

w

33


a u .

m o c

. e d

a r nt

u s . w

w

w

Optimized Re 34

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

速 m Optimized Reflector o

c . e

Multi Facetted Innovative Optimized Reflector速 Each Is Calculated Separately With a Complex Mathematical Procedure

d a r High Performance And Durability t n

su

. w

Precise Lighting Control Maximum Spacing - Minimum Maintenance

w

w

Controlled Beam

Compability With The Latest Generation Discharge Lamps Lamp Options From 60w To 150w Fulfilling The New European Standard En 13201, Class Me1 Optimal Performance With a Glare-Free, Uniform Lighting Distribution Flexibility Of Wide Range Of Light Source Applic Ations Ideal For Minor Traffic Roads, Town And City Streets, Residential Areas.

eflector

速 35


FIERO

Housing

Corrosion resistant die-cast aluminium optical housing lower and upper canopy with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components. Toughened flat clear glass can be hanged out & in and high heat resistance in Fiero luminaires.

Optical

Multi facetted innovative Optimized Reflector® each is calculated separately with a complex mathematical procedure. Reflector in pure anodized aluminium with tempered safety glass. Direct lighting system designed for discharge lamps. Moonlight reflector technology enables maximum light output and also cut off control. The reflector system has been carefully engineered to provide outstanding visual uniformity. The system is designed for efficiently illuminating the desired areas such as streets, car parks, architectural sites, etc. The system is available in single and double versions. Any type of lamp commonly used in urban settings can be incorporated, for power ratings varying between 60 and 150 W. Full cut-off optical system anodized and polished, 99.90% aluminium. Optical system with tempered flat glass complies with the Light Pollution requirements.

a u .

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

m o c

. e d

a r nt

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

u s . w

w

w

36

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Road Lighting Systems

Main Applications Ideal for Minor Traffic Roads, Residential Roads, Town and City Streets, Industrial Areas, Crossings. Mounting Side entry Mounting height: 4m - 8m Control gear Included Control gear mounting Integral Compliance EN 60598-1 EN 60598-2-3 EN 13201 Materials Die cast aluminium optical assembly. Subjected to chromate treatment. All screws are made of stainless steel. Weight Weight 5,0 Kg (excluding electrical components).

a u .

m o c

. e d

Optical System Optimized Reflector® developed by Heper + Moonlight fulfils the highest requirements ME1

a r nt

Reflector type Optimized Reflector®

u s . w

IP High quality sealing system Optical compartment: IP 66 Control gear: IP 66

w

Electrical Nominal voltage: 230 V – 240V

w

Lamp type: HST Lamps: 60W-150W

Insulation Class Electrical class: Class I (standard) - Class Il (on request) Operation and maintenance No tools are required for routine maintenance. Direct access to the lamp. The various wiring components (lamp, ignitor, ballast, condenser,etc) can be replaced individually. Automatic power cut off for safety. Finish Colour Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

37


a u .

m o c

. e d

a r nt

u s . w

w

w

38

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1251 1252

140W HST (CPO-TW) PGZ12 150W HIT G12

Code

Material

51

Accessories

Code

71

Anchorage Unit

Material

Code

Material

302

Poles

Code

Material

Height

21302 21303

GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE

4000 5000

39


NOVA

a u .

m o c

. e d

a r nt

u s . w

w

w

40

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

nova

w

w

41


NOVA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components. Toughened flat clear glass can be hanged out & in and high heat resistance in Nova luminaires.

Optical

Multi facetted innovative Optimized Reflector® each is calculated separately with a complex mathematical procedure. Reflector in pure anodized aluminium with tempered safety glass. Direct lighting system designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output and also cut off control. The reflector system has been carefully engineered to provide outstanding visual uniformity. The system is designed for efficiently illuminating the desired areas such as streets, car parks, architectural sites, etc. The system is available in single and double versions. Any type of lamp commonly used in urban settings can be incorporated, for power ratings varying between 140 and 400 W. Full cut-off optical system anodized and polished, 99.90% aluminium. Optical system with tempered flat glass complies with the Light Pollution requirements.

Electrical Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598-1, EN605982-3 and ENEC marked.

a u .

m o c

. e d

a r nt

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

u s . w

w

w

42

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

Code 1231 Code 1232 Code 1233

Code 1234 Code 1235

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1231 1232 1233 1234 1235

125W HME E27 140W HST (CPO-TW) PGZ12 150W HIT G12 250W HST E40 400W HST E40

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

302

Poles

Code

Material

Height

21105 22105

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND

5000 5000

43


DIVA

a u .

m o c

. e d

a r nt

u s . w

w

w

44

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

diva

w

w

45


DIVA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components. Toughened flat clear glass can be hanged out & in and high heat resistance in Diva luminaires.

Optical

Multi facetted innovative Optimized Reflector® each is calculated separately with a complex mathematical procedure. Reflector in pure anodized aluminium with tempered safety glass. Direct lighting system designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output and also cut off control. The reflector system has been carefully engineered to provide outstanding visual uniformity. The system is designed for efficiently illuminating the desired areas such as streets, car parks, architectural sites, etc. The system is available in single and double versions. Any type of lamp commonly used in urban settings can be incorporated, for power ratings varying between 140 and 400 W. Full cut-off optical system anodized and polished, 99.90% aluminium. Optical system with tempered flat glass complies with the Light Pollution requirements.

Electrical

a u .

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598-1, EN605982-3 and ENEC marked.

m o c

. e d

a r nt

u s . w

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

w

w

46

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

Code 1241 Code 1242 Code 1243

Code 1244 Code 1245

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1241 1242 1243 1244 1245

125W HME E27 140W HST (CPO-TW) PGZ12 150W HIT G12 250W HST E40 400W HST E40

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

302

Poles

Code

Material

Height

21105 22105

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND

5000 5000

47


ULTRA

a u .

m o c

. e d

a r nt

u s . w

w

w

48

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

ultra

w

w

49


ULTRA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components. Toughened flat clear glass can be hanged out & in and high heat resistance in Ultra luminaires.

Optical

Multi facetted innovative Optimized Reflector® each is calculated separately with a complex mathematical procedure. Reflector in pure anodized aluminium with tempered safety glass. Direct lighting system designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output and also cut off control. The reflector system has been carefully engineered to provide outstanding visual uniformity. The system is designed for efficiently illuminating the desired areas such as streets, car parks, architectural sites, etc. The system is available in single and double versions. Any type of lamp commonly used in urban settings can be incorporated, for power ratings varying between 140 and 400 W. Full cut-off optical system anodized and polished, 99.90% aluminium. Optical system with tempered flat glass complies with the Light Pollution requirements.

a u .

m o c

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598-1, EN605982-3 and ENEC marked.

. e d

a r nt

Finishing

u s . w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

w

w

50

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

Code 1261 Code 1262 Code 1263

Code 1264 Code 1265 Code 1266

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1261 1262 1263 1264 1265 1266

125W HME E27 140W HST (CPO-TW) PGZ12 150W HIT G12 250W HIT E40 250W HST E40 400W HST E40

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

302

Poles

Code

Material

21105 22105

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND

Height

5000 5000

51


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

53


OLYMPIC

a u .

m o c

. e d

a r nt

u s . w

w

w

54

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

olympic

w

w

55


OLYMPIC

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components. Toughened flat clear glass can be hanged out & in and high heat resistance in Olympic luminaires.

Optical

Reflector in pure anodized aluminium with tempered safety glass. Direct lighting system designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output and also cut off control. The reflector system has been carefully engineered to provide outstanding visual uniformity. The system is designed for efficiently illuminating the desired areas such as roads, avenues, crossroads, residential areas, car parks, public squares, etc. The system is available in single and double versions.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

a u .

m o c

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

. e d

a r nt

u s . w

w

w

56

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1281 1282

150 W HIT-DE Rx7s 250 W HIT-DE Fc2

Code

Material

51

Accessories

Code

71

Anchorage Unit

Material

Code

Material

303

Poles

Code

Material

Height

21308 21309 21310

GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE

6000 7000 8000

57


BISLEY

a u .

m o c

. e d

a r nt

u s . w

w

w

58

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

bisley

w

w

59


BISLEY

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components. Toughened flat clear glass can be hanged out & in and high heat resistance in Bisley luminaires.

Optical

Multi facetted innovative Optimized Reflector® each is calculated separately with a complex mathematical procedure. Reflector in pure anodized aluminium with tempered safety glass. Direct lighting system designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output and also cut off control. The reflector system has been carefully engineered to provide outstanding visual uniformity. The system is designed for efficiently illuminating the desired areas such as streets, car parks, architectural sites, etc. The system is available in single and double versions. Any type of lamp commonly used in urban settings can be incorporated, for power ratings varying between 70 and 150 W. Full cut-off optical system anodized and polished, 99.90% aluminium. Optical system with tempered flat glass complies with the Light Pollution requirements.

a u .

m o c

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

. e d

a r nt

Finishing

u s . w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

w

w

60

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1581 1582

150 W HIT G12 70 W HIT G12

Code

Material

51

Accessories

Code

71

Anchorage Unit

Material

Code

Material

303

Poles

Code

Material

Height

21308

GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE

6000

61


CITY

a u .

m o c

. e d

a r nt

u s . w

w

w

62

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Amenity & Area Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

city

w

w

63


CITY

Housing

Circular Fibre glass optical housing. Closed by a toughened glass and durable silicone rubber gaskets. Well designed housing of resistant to heat sensitive integral electrical components. Relamping without using any tool. Toolless maintenance through the safety hinged canopy and easily removed gear tray. Post-top entry mounting. Toughened flat clear glass can be hanged out & in and high heat resistance in City luminaires.

Optical

Multi facetted innovative Optimized Reflector® each is calculated separately with a complex mathematical procedure. Optimized Reflector for NAV-T 250W / 400W fulfilling the highest new European Standard EN 13201, Class ME1. Class ME1: Its appliance is only in roads with the following criteria: Speed > 60km/h with high traffic, many crossings and conflict zones (crossings with other traffic flows, pedestrians, bicycles). On most high traffic roads the classes ME3a to ME3c will satisfy the EN 13201. Roads with medium traffic require class ME4a, ME4b, and ME5. Optimized Reflector developed with Bartenbach. The theoretical LightDistribution is strictly calculated, which fulfils ME1 with many different geometries (width of read, height and distance of light poles). Also lower classes have been fulfilled efficiently, e.g. with larger distances of the light poles and less power. Calculation of the shape of the reflector is complicated which is divided into several facets, each is calculated separately with a complex mathematical procedure. Full cut-off optical system anodized and polished, 99.90% aluminium. Optical system with tempered flat glass complies with the Light Pollution requirements. Ideal for car parks, large roundabouts, market places and junctions. Optimal performance with a glare-free, uniform lighting distribution.

a u .

m o c

. e d

a r nt

u s . w

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. IP.65 for lamp and control gear. Electrical Insulation: CLASS I and Class II . The system complies with European standards EN13201&EN60598 and ENEC marked.

w

Finishing

w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

64

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Amenity & Area Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1631 1632

Terminal Box

Lamp Source

6 X 250 W HST E40 6 X 400 W HST E40

Code

51

Material

Anchorage Unit

Code

Material

320

Poles

Code

21317

Material

GALVANIZED STEEL POLYGONAL POLE WITH FLANGE PLATE

Height

15000

65


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

67


SIENA

a u .

m o c

. e d

a r nt

u s . w

w

w

68

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Amenity & Area Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

siena

w

w

69


SIENA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a glass diffuser and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components.

Optical

Direct lighting system designed for discharge lamps. The system is designed for efficiently illuminating the desired areas such as private or public areas, gardens and urban and suburban streets, etc. The system is available in single, double and triple versions.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

70

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Amenity & Area Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

Terminal Box

Lamp Source

1601 1602 1603 1604

150 W HIT-DE Rx7s 250 W HIT-DE Fc2 400 W HIT-DE Fc2 150 W HST E40

1605 1606

250 W HST E40 400 W HST E40

Code

Material

51

Accessories

Code

71

Anchorage Unit

Material

Code

Material

303

Poles

Code

21308 21309 21310

Material

Height

GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE

6000 7000 8000

71


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

Required field of radiation Curved facetted systems are based on projector - mirror technology, light concentrated from a primary reflector is aimed to a mirror field which reflects the light according to lighting design demands.

m o c

. e d

Reduced glare due to spot light redirection Systems providing required flat angles of radiation in principle risk of producing glare. With spot light redirection, projector mirror systems reduce glare to minimum. By arranging facets with alternating curvature (concave and convex) smooth links between facets can be achieved and multiple reflection and shading can be avoided.

a r nt

w

w

u s . w

Technology of the future The facets with alternating curvature and concave curved facets provide innovative performance. Patented by

73


URBIS

a u .

m o c

. e d

a r nt

u s . w

w

w

74

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

urbis

w

w

75


URBIS

Housing

Floodlight of corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets.Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Asymmetrical illumination, achieved with a secondary reflector (complex facets fields with mixed curvature) redirecting the light emitted by the primary reflector. The primary reflector part integrated into the floodlight radiates the narrow beam light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible and there is a controlled illumination with zero light pollution. The secondary reflector screen is compound from several different convex and concave reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. By arranging facets with alternating curvature (concave and convex) smooth links between facets can be realized and multiple reflection and shading can be avoided. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium primary reflector has been carefully engineered to provide outstanding visual uniformity and light emission to illuminate exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life. The system is planned to provide illumination of urban areas of cities from a mounting height of approx. 10 m. The system is available in single and double versions.

a u .

m o c

. e d

a r nt

u s . w

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

w

w

Finishing Poles are available in polygonal galvanized steel with liquid paint for high corrosion resistance. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete fixing. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish suitable for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

76

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1101 1102 1103

Terminal Box

Lamp Source

150 W HIT G12 250 W HIT G22 400 W HIT E40

Code

51

Material

Anchorage Unit

Code

Material

304

Poles

Code

21313

Material

GALVANIZED STEEL POLYGONAL POLE WITH FLANGE PLATE

Height

10000

77


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

79


FUTURA

a u .

m o c

. e d

a r nt

u s . w

w

w

80

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

futura

w

w

81


FUTURA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing resistant to heat sensitiveintegralelectricalcomponents.Aluminiumcanopyforsecondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission. Symmetric luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector. The primary reflector part integrated into the pole radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized primary aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

a u .

. e d

Spot-Light Redirection

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light Redirection glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realised with 4 x 33 facets with complex surface geometry.

m o c

a r nt

Electrical

u s . w

w

w

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

82

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w Code 1112

w

w

FUTURA Luminaire

Terminal Box

Code

Lamp Source

1111

150 W HIT G12

Code

Material

51

Accessories

Code

Anchorage Unit

Material

Code

Material

301

71

FUTURA VERSUS Luminaire

Terminal Box

Code

Lamp Source

1112

150 W HIT G12

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

301

Poles

Code

Material

Height

21104 22104 11102 12102

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

83


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

85


TRIO

a u .

m o c

. e d

a r nt

u s . w

w

w

86

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

trio

w

w

87


TRIO

Housing

Corrosion resistant reinforced polyester fibreglass optical housing, with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission. Asymmetrical luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector. The primary reflector part integrated into the pole radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized primary aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Spot-Light Redirection

a u .

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light Redirection glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realised with 4 x 33 facets with complex surface geometry.

m o c

. e d

a r nt

u s . w

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Electrical Insulation: CLASS II The system complies with European standards EN60598 and ENEC marked.

w

w

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

88

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1121 1122 1123

1 x 150 W HIT G12 2 x 150 W HIT G12 3 x 150 W HIT G12

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

302

Poles

Code

Material

Height

21105 22105

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND

5000 5000

89


TECNA

a u .

m o c

. e d

a r nt

u s . w

w

w

90

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

tecna

w

w

91


TECNA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission. Symmetric luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector. The primary reflector part integrated into the pole radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized primary aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

a u .

. e d

Spot-Light Redirection

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light Redirection glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realised with 4 x 33 facets with complex surface geometry.

m o c

a r nt

Electrical

u s . w

w

w

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

92

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Accessories

Code

Lamp Source

1131

150 W HIT G12

Code

71

Anchorage Unit

Material

Code

Material

301

Poles

Code

Material

Height

21102 22102 11104 12104

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

93


MERLOT

a u .

m o c

. e d

a r nt

u s . w

w

w

94

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

merlot

w

w

95


MERLOT

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission. Symmetric and asymmetrical luminaire, which is equipped with a secondary reflector (complexfacets field)redirecting the light emitted by the primary reflector with an adjustable position 0째-15째. The primary reflector part integrated into the pole radiates the light on the secondary reflector mirror field fixed above.The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized primary aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Spot- Light Redirection

a u .

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light Redirection glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realised with 4 x 33 facets with complex surface geometry.

m o c

. e d

a r nt

u s . w

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

w

w

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

96

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1141

150 W HIT G12

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

301

Poles

Code

Material

Height

21104 22104 11102 12102

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

97


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

99


METROPOLITAN

a u .

m o c

. e d

a r nt

u s . w

w

w

100

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

metropolitan

w

w

101


METROPOLITAN

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting systemforeffectiveilluminationeliminatingexcesslightemission. Asymmetrical luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector. The primary reflector part integrated into the pole radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized primary aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

a u .

Spot- Light Redirection

m o c

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light Redirection glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realised with 4 x 33 facets with complex surface geometry.

. e d

a r nt

u s . w

w

Electrical

w

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

102

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1151

150 W HIT G12

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

301

Poles

Code

Material

Height

21104 22104 11102 12102

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

103


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

105


IMPERIAL

a u .

m o c

. e d

a r nt

u s . w

w

w

106

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

imperial

w

w

107


IMPERIAL

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing resistant to heat sensitiveintegralelectricalcomponents.Aluminiumcanopyforsecondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission. Symmetric luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector. The primary reflector part integrated into the pole radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized primary aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

a u .

. e d

Spot- Light Redirection

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light decomposition glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realized with 4 x 33 facets with complex surface geometry.

m o c

a r nt

Electrical

u s . w

w

w

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

108

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1541

150 W HIT G12

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

301

Poles

Code

Material

Height

21102 22102 11104 12104

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

109


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

111


RITMO

a u .

m o c

. e d

a r nt

u s . w

w

w

112

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

ritmo

w

w

113


RITMO

Housing

Floodlight of corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Symmetrical illumination, achieved with a secondary reflector (complex facets) redirecting the light emitted by the primary reflector.The primary reflector part integrated into the floodlight radiates the narrow beam light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible and there is a controlled illumination with zero light pollution. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium primary reflector has been carefully engineered to provide outstanding visual uniformity and light emission to illuminate exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life. The system is planned to provide illumination of urban areas of cities from a mounting height of approx.5-6 m. The system is available in single and double versions.

Electrical

m o c

. e d

a r nt

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

u s . w

w

w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish suitable for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request. request.

114

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1501

150 W HIT G12

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

302

Poles

Code

Material

Height

21105 22105

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND

5000 5000

115


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

117


LOFT

a u .

m o c

. e d

a r nt

u s . w

w

w

118

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

loft

w

w

119


LOFT

Housing

Floodlight of corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Symmetrical illumination, achieved with a secondary reflector (complex facets) redirecting the light emitted by the primary reflector.The primary reflector part integrated into the floodlight radiates the narrow beam light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible and there is a controlled illumination with zero light pollution. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium primary reflector has been carefully engineered to provide outstanding visual uniformity and light emission to illuminate exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life. The system is planned to provide illumination of urban areas of cities from a mounting height of approx.5-6 m. The system is available in single and double versions.

Electrical

m o c

. e d

a r nt

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

u s . w

w

w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish suitable for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

120

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1511

150 W HIT G12

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

302

Poles

Code

Material

Height

21105 22105

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND

5000 5000

121


UNO

a u .

m o c

. e d

a r nt

u s . w

w

w

122

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

uno

Secondary Reflector Systems

m o c

. e d

a r nt

u s . w

uno

w

w

123


UNO

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets.Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Symmetrical illumination, achieved with a secondary reflector (complex facets) redirecting the light emitted by the primary reflector.The primary reflector part integrated into the floodlight radiates the narrow beam light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible and there is a controlled illumination with zero light pollution. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium primary reflector has been carefully engineered to provide outstanding visual uniformity and light emission to illuminate exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life. The system is planned to provide illumination of urban areas of cities from a mounting height of approx.5-6 m. The system is available in single and double versions.

Electrical

m o c

. e d

a r nt

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

u s . w

w

w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish suitable for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

124

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1521

150 W HIT G12

Code

51

Material

Anchorage Unit

Code

Material

301

Poles

Code

Material

Height

21316

GALVANIZED STEEL POLE WITH FLANGE PLATE

4000

125


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

127


QUADRATO

a u .

m o c

. e d

a r nt

u s . w

w

w

128

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

quadrato

w

w

129


QUADRATO

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets.Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Symmetrical illumination, achieved with a secondary reflector (complex facets) redirecting the light emitted by the primary reflector.The primary reflector part integrated into the floodlight radiates the narrow beam light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible and there is a controlled illumination with zero light pollution. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium primary reflector has been carefully engineered to provide outstanding visual uniformity and light emission to illuminate exactly within the surface of the secondary reflector facets. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life. The system is planned to provide illumination of urban areas of cities from a mounting height of approx.5-6 m. The system is available in single and double versions.

Electrical

m o c

. e d

a r nt

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

u s . w

w

w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish suitable for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

130

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Terminal Box

Code

Lamp Source

1531

150 W HIT G12

Code

51

Material

Anchorage Unit

Code

Material

301

Poles

Code

Material

Height

21316

GALVANIZED STEEL POLE WITH FLANGE PLATE

4000

131


VENERA

a u .

m o c

. e d

a r nt

u s . w

w

w

132

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

venera

w

w

133


VENERA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components.

Optical

Primary reflector in pure anodized aluminium with tempered safety glass. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Heper + Moonlight reflectortechnologyenablesmaximumlightoutput.Highpurityanodized aluminiumreflectorhasbeencarefullyengineeredtoprovideoutstanding visual uniformity & comfort and light emission to come exactly within the surface of the Reinforced Polyester Fibreglass reflector screen. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for avenue, road, park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life. The system is available in single and double versions.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

Poles are available in galvanized steel with primary powder coating for high corrosion resistance. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

w

134

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

VENERA Luminaire

Terminal Box

Code

Lamp Source

1161 1162

150 W HIT G12 250 W HIT G22

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

302

Poles

Code

Material

Height

21106

GALVANIZED STEEL POLE WITH FLANGE PLATE

6000

135


VENERA MEGA

a u .

m o c

. e d

a r nt

u s . w

w

w

136

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

VENERA MEGA Luminaire

Terminal Box

Code

Lamp Source

1171 1172

250 W HIT G12 400 W HIT E40

Code

Material

51

Accessories

Code

71

Anchorage Unit

Material

Code

Material

303

Poles

Code

Material

21210

GALVANIZED STEEL POLE WITH FLANGE PLATE

Height

10000

137


VISTA

a u .

m o c

. e d

a r nt

u s . w

w

w

138

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

vista

w

w

139


VISTA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components.

Optical

Primary reflector in pure anodized aluminium with tempered safety glass. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Rotationally symmetrical or asymmetrical light distribution with adjustable position of 0째- 15째. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the screen. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

a u .

. e d

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

a r nt

u s . w

w

w

140

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1181

Terminal Box

Lamp Source

Code

Material

Accessories

Code

Anchorage Unit

Material

Code

Material

150 W HIT G12 51

71

301

Poles

Code

21104 22104 11102 12102

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

141


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

143


VISTA VERSUS

a u .

m o c

. e d

a r nt

u s . w

w

w

144

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

vista versus

w

w

145


VISTA VERSUS

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components.

Optical

Primary reflector in pure anodized aluminium with tempered safety glass. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Rotationally symmetrical or asymmetrical light distribution with adjustable position of 0째-15째. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the screen. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

a u .

. e d

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

a r nt

u s . w

w

w

146

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Accessories

Code

Lamp Source

1191

70 W HIT G12

Code

71

Anchorage Unit

Material

Code

Material

300

Poles

Code

Material

Height

21101 22101 11103 12103

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

3000 3000 3000 3000

147


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

149


ANGORA

a u .

m o c

. e d

a r nt

u s . w

w

w

150

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

angora

w

w

151


ANGORA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components.

Optical

Primary reflector in pure anodized aluminium with tempered safety glass. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the Reinforced Polyester Fibreglass or alternatively aluminium reflector screen. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for urban, park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

a u .

. e d

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

a r nt

u s . w

w

w

152

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Accessories

Code

Lamp Source

1201

150 W HIT G12

Code

71

Anchorage Unit

Material

Code

Material

301

Poles

Code

Material

Height

21401

GALVANIZED STEEL CONICAL POLE WITH FLANGE PLATE

4000

153


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

155


STUDIO

a u .

m o c

. e d

a r nt

u s . w

w

w

156

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

studio

w

w

157


STUDIO

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components.

Optical

Primary reflector in pure anodized aluminium with tempered safety glass. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Heper + Moonlight reflectortechnologyenablesmaximumlightoutput.Highpurityanodized aluminiumreflectorhasbeencarefullyengineeredtoprovideoutstanding visual uniformity and light emission to come exactly within the surface of the Reinforced Polyester Fibreglass reflector screen. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

Poles are available in galvanized steel with primary powder coating for high corrosion resistance. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

w

158

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1221

Terminal Box

Lamp Source

Code

Material

Accessories

Code

Anchorage Unit

Material

Code

Material

150 W HIT G12 51

71

301

Poles

Code

21104 22104 11102 12102

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

159


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

161


ALPHA

a u .

m o c

. e d

a r nt

u s . w

w

w

162

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

alpha

w

w

163


ALPHA

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components.

Optical

Primary reflector in pure anodized aluminium with tempered safety glass. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Asymmetrical light distribution. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the screen. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

w

164

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1551

Terminal Box

Lamp Source

Code

Material

Accessories

Code

Anchorage Unit

Material

Code

Material

150 W HIT G12 51

71

301

Poles

Code

21104 22104 11102 12102

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

165


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

167


REGAL

a u .

m o c

. e d

a r nt

u s . w

w

w

168

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

regal

w

w

169


REGAL

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components.

Optical

Primary reflector in pure anodized aluminium with tempered safety glass. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity and light emission to come exactly within the surface of the screen. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

a u .

. e d

Finishing

Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

a r nt

u s . w

w

w

170

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Indirect Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1561

Terminal Box

Lamp Source

Code

Material

Accessories

Code

Anchorage Unit

Material

Code

Material

150 W HIT G12 51

71

301

Poles

Code

21104 22104 11102 12102

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

171


SANTA

a u .

m o c

. e d

a r nt

u s . w

w

w

172

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

santa

w

w

173


SANTA

Housing

Housing and carrier elements of die-cast aluminium with stainless steel screws. Closed by a clear acrylic diffuser and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components.

Optical

High efficiency optical system in vertical lamp. Aluminium louver system providing glare control. Direct lighting system designed for discharge and energy saving lamps. The optical system has been carefully engineered to provide high illumination and enhance security.The system is designed for efficiently illuminating the desired areas such as residential areas, pedestrian areas, private or public gardens, parks, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

174

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Accessories

Code

Lamp Source

1311 1312

125 W HME E27 70 W HIE E27

Code

71

Anchorage Unit

Material

Code

Material

300

Poles

Code

Material

Height

21201 22201 11204 12204

GALVANIZED STEEL STEPPED POLE WITH FLANGE PLATE GALVANIZED STEEL STEPPED POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

3000 3000 3000 3000

175


SANTA VERSUS

a u .

m o c

. e d

a r nt

u s . w

w

w

176

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

santa versus

w

w

177


SANTA VERSUS

Housing

Well designed fibreglass reinforced plastic housing of resistant to heat sensitive integral electrical components. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

High efficiency optical system in vertical lamp. Direct lighting system designed for discharge and energy saving lamps. The optical system has been carefully engineered to provide high illumination and enhance security. The system is designed for efficiently illuminating the desired areas such as residential areas, pedestrian areas, private or public gardens, parks, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Electrical Insulation: CLASS II The system complies with European standards EN60598 and ENEC marked.

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

178

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Accessories

Code

Lamp Source

1313 1314

125 W HME E27 70 W HIE E27

Code

71

Anchorage Unit

Material

Code

Material

300

Poles

Code

Material

Height

21100 22100 11100 12100

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

3000 3000 3000 3000

179


TERRA

a u .

m o c

. e d

a r nt

u s . w

w

w

180

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

terra

w

w

181


TERRA

Housing

Housing and carrier elements of die-cast aluminium with stainless steel screws. Closed by a clear acrylic diffuser and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components.

Optical

High efficiency optical system in vertical lamp. Aluminium louver system providing glare control. Direct lighting system designed for discharge and energy saving lamps. The optical system has been carefully engineered to provide high illumination and enhance security.The system is designed for efficiently illuminating the desired areas such as residential areas, pedestrian areas, private or public gardens, parks, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

182

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Accessories

Code

Lamp Source

1321 1322 1323

125 W HME E27 150 W HIT G12 70 W HIT G12

Code

71

Anchorage Unit

Material

Code

Material

300

Poles

Code

Material

Height

21201 22201 11204 12204

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

3000 3000 3000 3000

183


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

185


ART

a u .

m o c

. e d

a r nt

u s . w

w

w

186

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

art

w

w

187


ART

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components.

Optical

Direct lighting system designed for discharge lamps. The system is designed for efficiently illuminating the desired areas such as private or public areas, gardens and urban and suburban streets, etc. The system is available in single, double and triple versions.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

188

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

code 1333

Luminaire

Accessories

Code

Lamp Source

1331 1332 1333

150 W HIT Rx7s 70 W HIT Rx7s 125 W HME E27

Code

71

Anchorage Unit

Material

Code

Material

301

Poles

Code

Material

Height

21102 22102 11104 12104

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

189


LEGEND

a u .

m o c

. e d

a r nt

u s . w

w

w

190

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

legend

w

w

191


LEGEND

Housing

Carrier elements of die-cast aluminium with stainless steel screws. Opal acrylic diffuser and durable silicone rubber gaskets.

Optical

Efficient lighting system designed for discharge and energy saving lamps. The system is designed for efficiently illuminating the desired areas such as residential and pedestrian areas, parks, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Poles are available in galvanized steel with primary powder coating for high corrosion resistance and also in aluminium on request. The poles offer considerable resistance to atmospheric agents and supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Ground buried version is available on request. Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

192

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1341 1342

Accessories

Lamp Source

125 W HME E27 70 W HIE E27

Code

71

Anchorage Unit

Material

Code

Material

300

Poles

Code

21101 22101 11103 12103

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

3000 3000 3000 3000

193


COOL

a u .

m o c

. e d

a r nt

u s . w

w

w

194

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

cool

w

w

195


COOL

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components.

Optical

Primary reflector in pure anodized aluminium with acrylic diffuser and aluminium louver system providing glare control. Direct-Indirect lighting system for effective illumination avoiding the useless emission of light designed for discharge lamps. Heper + Moonlight reflector technology enablesmaximumlight output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity. The luminaire is designed to Metal Halide lamps and is used increasingly for park and pedestrian lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

Anchorage set is included with flanged version. Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

w

196

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1571

Terminal Box

Lamp Source

Code

Material

Accessories

Code

Anchorage Unit

Material

Code

Material

150 W HIT G12 51

71

301

Poles

Code

21104 22104 11102 12102

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

197


FOCUS

a u .

m o c

. e d

a r nt

u s . w

w

w

198

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

focus

w

w

199


FOCUS

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a glass diffuser and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components.

Optical

Direct lighting system designed for discharge lamps. The system is designed for efficiently illuminating the desired areas such as private or public areas, gardens and urban and suburban streets, etc. The system is available in single, double and triple versions.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Light fitting is powder coated. Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

200

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1591

Terminal Box

Lamp Source

Code

Material

Accessories

Code

Anchorage Unit

Material

Code

Material

150 W HIT G12 51

71

301

Poles

Code

21105 22105 11105

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE

5000 5000 5000

201


IGNIS

a u .

m o c

. e d

a r nt

u s . w

w

w

202

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

ignis

w

w

203


IGNIS

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components.

Optical

Direct lighting system designed for discharge lamps. The system is designed for efficiently illuminating the desired areas such as private or public areas, gardens and urban and suburban streets, etc. The system is available in single, double and triple versions.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

204

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1611

Terminal Box

Lamp Source

Code

Material

Accessories

Code

Anchorage Unit

Material

Code

Material

125 W HME E27 51

71

300

Poles

Code

21201 22201 11204 12204

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

3000 3000 3000 3000

205


ALBUS

a u .

m o c

. e d

a r nt

u s . w

w

w

206

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Urban Contemporary Lighting Systems

a u .

m o c

. e d

a r nt

u s . w

albus

w

w

207


ALBUS

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing of resistant to heat sensitive integral electrical components. Toughened flat clear glass can be hanged out & in and high heat resistance in Albus luminaires.

Optical

Multi facetted innovative Optimized Reflector® each is calculated separately with a complex mathematical procedure. Reflector in pure anodized aluminium with tempered safety glass. Direct lightingsystemdesignedfordischargelamps.Heper+Moonlightreflector technology enables maximum light output and also cut off control. The reflector system has been carefully engineered to provide outstanding visual uniformity. The system is designed for efficiently illuminating the desired areas such as streets, car parks, architectural sites, etc. The system is available in single and double versions. Any type of lamp commonly used in urban settings can be incorporated, for power ratings varying between 70 and 150 W. Full cut-off optical system anodized and polished, 99.90% aluminium. Optical system with tempered flat glass complies with the Light Pollution requirements.

a u .

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

m o c

. e d

a r nt

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

u s . w

w

w

208

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1621 1622

Terminal Box

Lamp Source

140 W HST (CPO-TW) PGZ12 150 W HIT G12

Code

51

Material

Accessories

Code

71

Anchorage Unit

Material

Code

Material

301

Poles

Code

21104 22104 11102 12102

Material

Height

GALVANIZED STEEL POLE WITH FLANGE PLATE GALVANIZED STEEL POLE BURIED TO THE GROUND ALUMINIUM POLE WITH FLANGE PLATE ALUMINIUM POLE BURIED TO THE GROUND

4000 4000 4000 4000

209


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

Bollards

Bollards show the passion, sensitivity and aesthetics of the beauties in gardens and extend the living environment into the evening hours for entertainment and recreational activities. Covered with primary powder coating paint and die-cast aluminium structure, a shiny and durable finish makes Heper + Moonlight bollards resistant to the extreme weather variations of every climate. Inspired by the wonder of the heavens of the Mediterranean style, our bollards offer designers an opportunity to paint with light. Heper + Moonlight bollards, can achieve every aesthetic and architectural consideration while ensuring the most demanding lighting requirements are met.

m o c

. e d

a r nt

u s . w

w

w

211


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

aura mega

w

212

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


AURA MEGA

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a glass diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for discharge lamps. Three sided light output. The system is designed for efficiently illuminating the desired areas such as pedestrian areas, residential areas, private or public gardens, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

AURA MEGA Luminaire

Code

1401

Accessories

Lamp Source

Code

Anchorage Unit

Material

Code

Material

150 W HIT G12 72

307

213


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

era

w

214

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ERA

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a glass diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for discharge lamps. Four sided light output. The system is designed for efficiently illuminating the desired areas such as pedestrian areas, residential areas, private or public gardens, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1411

Accessories

Lamp Source

Code

Anchorage Unit

Material

Code

Material

70 W HIT G12 73

305

215


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

luna

w

216

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


LUNA

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a UV stabilized special design acrylic diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for fluorescent lamps. Two sided light output. Creative and modular lighting system for urban and residential applications.

Electrical

Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1421

Anchorage Unit

Lamp Source

Code

Material

2 x 18 W T26 G13 309

217


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

digna

w

218

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


DIGNA

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a UV stabilized acrylic diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed fluorescent lamps. Two sided light output. Creative and modular lighting system for urban and residential applications.

Electrical

Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

1431

Anchorage Unit

Lamp Source

Code

Material

36 W T26 G13 310

219


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

aura mini

w

220

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


AURA MINI

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a glass diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for discharge lamps. Three sided light output. The system is designed for efficiently illuminating the desired areas such as residential areas, entrances, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3101

Accessories

Lamp Source

Code

Anchorage Unit

Material

Code

Material

35 W HIT G12 72

308

221


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

era mini

w

222

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ERA MINI

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a glass diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for discharge lamps. Four sided light output. The system is designed for efficiently illuminating the desired areas such as entrances, residential areas, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Supplied with base plate and anchorage set in galvanized steel to be fixed in concrete. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Accessories

Code

Lamp Source

3111

35 W HIT G12

Code

73

Anchorage Unit

Material

Code

Material

306

223


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

luna mini

w

224

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


LUNA MINI

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a special acrylic UV stabilized diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for compact fluorescent lamps. Two sided light output.The system is designed for efficiently illuminating the desired areas such as residential areas, walkways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request. Supplied with base plate and ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3121

Anchorage Unit

Lamp Source

Code

Material

18 W TC-L 2G11 309

225


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

digna mini

w

226

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


DIGNA MINI

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for compact fluorescent lamps. Two sided light output.The system is designed for efficiently illuminating the desired areas such as residential areas, walkways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request. Supplied with base plate and ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3131

Anchorage Unit

Lamp Source

Code

Material

18 W TC-L 2G11 311

227


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

stile

w

228

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


STILE

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a special UV stabilized acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for compact fluorescent lamps. The system is designed for efficiently illuminating the desired areas such as residential areas, pathways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request. Supplied with base plate and ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3141

Anchorage Unit

Lamp Source

Code

Material

18 W TC-D G24 312

229


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

dizzy

w

230

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


DIZZY

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for compact fluorescent lamps. The system is designed for efficiently illuminating the desired areas such as gardens and pathways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request. Supplied with base plate and ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3161

Anchorage Unit

Lamp Source

Code

Material

18 W TC-D G24 312

231


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

troli

w

232

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


TROLI

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for compact fluorescent lamps. The system is designed for efficiently illuminating the desired areas such as gardens and pathways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request. Supplied with base plate and ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3171

Anchorage Unit

Lamp Source

Code

Material

18 W TC-D G24 312

233


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

esse

w

234

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ESSE

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for compact fluorescent lamps. The system is designed for efficiently illuminating the desired areas such as gardens and pathways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request. Supplied with base plate and ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3181

Anchorage Unit

Lamp Source

Code

Material

18 W TC-D G24 312

235


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

orion

w

236

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ORION

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for discharge lamps. The varying lamp alternatives enable the creation of a unique and striking bollard to integrate with any exterior project.The system is designed for efficiently illuminating the desired areas such as residential areas, pathways and driveways etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request. Supplied with base plate and ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3191 3192

Anchorage Unit

Lamp Source

Code

70 W HIT G12 35 W HIT G12

313

Material

237


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

siwa

w

238

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


SIWA

Housing

Corrosion resistant stainless steel head with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for compact fluorescent lamps. The system is designed for efficiently illuminating the desired areas such as residential areas, pathways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Teakwood column with glued laminated timber process eliminating any natural defect of timber and ensures the durability and strength. Siwa is a functional product that matches the stylish modern design of the Heper + Moonlight modern range of bollards. Primary paint application for outdoor use. Finishing is optional for wooden colours. Supplied with base plate and ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3201

Anchorage Unit

Lamp Source

Code

Material

13 W TC-D G24 312

239


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

fuga

w

240

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


FUGA

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for compact fluorescent lamps.. The system is designed for efficiently illuminating the desired areas such as pathways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black,grey and dark grey colours standard. RAL colours upon request. Supplied with ground support.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3221

Lamp Source

13 W TC-D G24

241


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

atos

w

242

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ATOS

Housing

Corrosion resistant extruded aluminium bollard with stainless steel screws. Closed by a glass diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for PAR and Discharge lamps. The system is designed for efficiently illuminating the desired areas such as entrances, residential areas, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

Aluminium bollard with primary powder coating for high corrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality ďŹ nish for all weather conditions. Supplied with base plate and anchorage set in galvanized steel to be ďŹ xed in concrete. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3261 3262

Anchorage Unit

Lamp Source

Code

20 W HIT PGL5 75 W PAR 30 E27

313

Material

243


Bollards

a u .

m o c

. e d

vista versus mini

a r nt

244

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


VISTA VERSUS MINI

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a tempered glass and durable silicone rubber gaskets.

Optical

Indirect lighting system designed for metal halide lamps. The system is designed for efficiently illuminating the desired areas such as residential or commercial areas, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black,grey and dark grey colours standard. RAL colours upon request. Supplied with base plate and ground support.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3231 3232

Lamp Source

35 W HIT G12 70 W HIT G12

245


Bollards

a u .

m o c

. e d

a r nt

u s . w

w

ring

w

246

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


RING

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for compact fluorescent lamps. The system is designed for efficiently illuminating the desired areas such as gardens and pathways, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black,grey and dark grey colours standard. RAL colours upon request. Supplied with ground support. Anchorage set in galvanized steel to be fixed in concrete is available on request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

3251

Anchorage Unit

Lamp Source

Code

Material

18 W TC-D G24 309

247


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

Wall & Ceiling Luminaires An impressive commercial centre, a private residence or a hotel that is admired by day can be transformed into a multidimensional showplace at night. Heper + Moonlight wall luminaires create evening a wonderland of beauty and bring quality, elegance and pride to the buildings, gardens, terraces and courtyards. All the fixtures ensure excellent resistance to the external agents with their die-cast aluminium frame. The recessed and wall-mounted fixtures provide functional lighting with their sophisticated design.

249


Wall & Ceilling Luminaires

a u .

m o c

. e d

a r nt

u s . w

w

urbis wall

w

250

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


URBIS WALL

Housing

Floodlight of corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Asymmetrical illumination, achieved with a secondary reflector(complexfacetsfieldswithmixedcurvature)redirectingthelight emitted by the primary reflector. The primary reflector part integrated into the floodlight radiates the narrow beam light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible and there is a controlled illumination with zero light pollution. The secondary reflector screen is compound from several different convex and concave reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in predefined angles of radiation. By arranging facets with alternating curvature (concave and convex) smooth links between facets can be realized and multiple reflection and shading can be avoided.

Electrical

a u .

Digital electronic power control gear which is fitted with all the components required to operate discharge lamps. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

m o c

. e d

a r nt

Finishing

u s . w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

w

w

Luminaire

Code

5101 5102

Lamp Source

150 W HIT G12 250 W HIT G12 - G22

251


Wall & Ceilling Luminaires

a u .

m o c

. e d

a r nt

u s . w

w

futura wall

w

252

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


FUTURA WALL

Housing

Corrosion resistant reinforced polyester fibreglass optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission. Symmetric and asymmetrical luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector.The primary reflector part integrated into the housing radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation.

Spot-Light Redirection

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light Redirection glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realised with 4 x 33 facets with complex surface geometry.

Electrical

a u .

m o c

. e d

a r nt

Digital electronic power control gear which is fitted with all the components required to operate discharge lamps. Electrical Insulation: CLASS II. The system complies with European standards EN60598 and ENEC marked.

Finishing

u s . w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

w

w

Luminaire

Code

5111

Lamp Source

150 W HIT G12

253


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

255


Wall & Ceilling Luminaires

a u .

m o c

. e d

a r nt

u s . w

w

futura pendant

w

256

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


FUTURA PENDANT

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission. Symmetric luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector. The primary reflector part integrated into the housing radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation.

a u .

Spot-Light Redirection

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light Redirection glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realised with 4 x 33 facets with complex surface geometry.

m o c

. e d

a r nt

Electrical

Digital electronic power control gear which is fitted with all the components required to operate discharge lamps. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

u s . w

w

w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Complete with suspension cables. Black, grey and dark grey colours standard. RAL colours upon request.

Luminaire

Code

5121

Lamp Source

150 W HIT G12

257


Wall & Ceilling Luminaires

a u .

m o c

. e d

a r nt

u s . w

w

trio pendant

w

258

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


TRIO PENDANT

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metalized facetted surface suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system foreffectiveilluminationeliminatingexcesslightemission.Asymmetrical luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector. The primary reflector part integrated into the housing radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation.

a u .

Spot-Light Redirection

Redirection of the light source in many (hundreds) of small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light Redirection glare is dramatically reduced. Small spot lights, homogeneously distributed on the secondary mirror, realised with 4 x 33 facets with complex surface geometry.

m o c

. e d

a r nt

Electrical

Digital electronic power control gear which is fitted with all the components required to operate discharge lamps. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

u s . w

w

w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Complete with suspension column. Black, grey and dark grey colours standard. RAL colours upon request.

Luminaire

Code

5131

Lamp Source

3 X 150 W HIT G12

259


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

261


Wall & Ceilling Luminaires

a u .

m o c

. e d

a r nt

u s . w

selge downlight

w

262

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


SELGE DOWNLIGHT

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened clear and flat glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components.

Optical

Primaryreflectorinpureanodizedaluminiumwithtemperedsafetyglass. Down lighting system for effective illumination designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity. The luminaire is designed to Metal Halide Discharge and PAR lamps and is used increasingly for outdoor ceiling lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

a u .

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

om

c . e

code 5141 5142

code 5143 5144

d a r t n

u s . w

w

w

Luminaire

Code

5141 5142 5143 5144

Lamp Source

150 W HIT G12 70 W HIT G12 35 W HIT G12 75 W PAR 30 E27

Luminaire

Code

5145

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500째K, 4.000째K, 4.500째K UPON REQUEST. LUMINOUS FLUX : 540 lm RATED LIFETIME : 100.000 h

263


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

265


SELGE WALL

selge wall

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened clear and flat glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components. Available with IP.65 connector.

Optical

Primaryreflectorinpureanodizedaluminiumwithtemperedsafetyglass. Wall lighting system for effective illumination designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output with narrow and wide beam reflectors. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity. The luminaire is designed to Metal Halide Discharge and PAR lamps and is used increasingly for outdoor wall lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

m o c

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

. e d

a r nt

u s . w

w

w

connector IP.65 Luminaire

Code

5151 5152 5153

266

Lamp Source

2 x 70 W HIT G12 2 x 150 W HIT G12 2 x 75 W PAR 30 E27

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


SELGE WALL LED

selge wall led

2 x 12 monochromatic LED fixture. Lighting system designed for LEDs able to change a normal surface into a light scenario. For indoor and outdoor applications. The system is designed for efficiently illuminating facades and to emphasize lines of architecture. High precision collimator for light beam concentration. Standard beam angle: 6° Independent White, Blue, Red and Green for a full range of smooth and satured shades of colours (RGB version available with a DMX external control). Operating temperature -15°C - +40°C.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

Lamp Source

5154

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 2 X 660 lm RATED LIFETIME : 100.000 h

267


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

269


SELGE MINI WALL

selge mini wall

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened clear and flat glass and durable silicone rubber gaskets.

Optical

Primary reflector in pure anodized pure aluminium with tempered safety glass. Wall lighting system for effective illumination designed for PAR lamps. Heper + Moonlight reflector technology enables maximum light output.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5161 5162

270

Lamp Source

2 x 50 W PAR 20 E27 2 x 20 W HIT PGL5

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


2 x 6 monochromatic LED fixture. Lighting system designed for LEDs able to change a normal surface into a light scenario. For indoor and outdoor applications. The system is designed for efficiently illuminating facades and to emphasize lines of architecture. High precision collimator for light beam concentration. Standard beam angle: 6° Independent White, Blue, Red and Green for a full range of smooth and satured shades of colours (RGB version available with a DMX external control). Operating temperature -15°C - +40°C.

a u .

m o c

selge mini wall led

SELGE MINI WALL LED

. e d

a r nt

u s . w

w

w

Luminaire

Code

5163

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 2 X 330 lm RATED LIFETIME : 100.000 h

271


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

273


Wall & Ceilling Luminaires

a u .

m o c

. e d

a r nt

u s . w

w

zen

w

274

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ZEN

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened clear and flat glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components.

Optical

Primaryreflectorinpureanodizedaluminiumwithtemperedsafetyglass. Down lighting system for effective illumination designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity. The luminaire is designed to Metal Halide Discharge and PAR lamps and is used increasingly for outdoor ceiling lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

a u .

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5401 5402

Lamp Source

150 W HIT G12 70 W HIT G12

Luminaire

Code

5403

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 540 lm RATED LIFETIME : 100.000 h

275


Wall & Ceilling Luminaires

a u .

m o c

. e d

a r nt

u s . w

w

stela

w

276

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


STELA

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Compact shape and various light beam alternatives for architects and light designers. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The luminaire is designed for efficiently highlighting architectural features. High precision aluminium reflectors either in narrow or medium beam. Supplied with control gear kit.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5411 5412

Lamp Source

35 W HIT G12 70 W HIT G12

277


Wall & Ceilling Luminaires

a u .

m o c

. e d

a r nt

u s . w

w

aris

w

278

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ARIS

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special metallized facetted surface suitable for external applications.

Optical

Primaryreflectorinpureanodizedaluminium.Indirectlightingsystemfor effective illumination eliminating excess light emission. Symmetric and asymmetrical luminaire, which is equipped with a secondary reflector (complex facets field) redirecting the light emitted by the primary reflector.The primary reflector part integrated into the housing radiates the light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible. The secondary reflector screen comprises of several different reflecting facets. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation.

a u .

Spot- Light Re-Direction

Redirection of the light source in many small light points (one in each facets), each reflecting exactly according to the lighting design requirements. In areas outside the allowed angles of radiation luminance is dramatically reduced (cut off ) due to perfect surfaces of the facets (highly specular, no surface scattering). Due to spot light decomposition glare is dramatically reduced. Small spotlights,homogeneouslydistributedonthesecondarymirror,realised with 4 x 33 facets with complex surface geometry.

m o c

. e d

a r nt

Electrical

Digital electronic power control gear which is fitted with all the components required to operate discharge lamps. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

u s . w

w

w

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Supplied with mounting kit. Black, grey and dark grey colours standard. RAL colours upon request.

Luminaire

Code

5421

Lamp Source

70 W HIT G12

279


VIGOR PRO

vigor pro

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a special acrylic UV stabilized diffuser and durable silicone rubber gaskets.

Optical

Direct wall lighting system designed for compact fluorescent lamps.The system is designed for illuminating the desired areas such as residential or commercial areas, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5181 5182

280

Lamp Source

26 W TC-D G24 18 W TC-D G24

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


SAVO

savo

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a special acrylic UV stabilized diffuser and durable silicone rubber gaskets.

Optical

Indirect wall lighting system designed for compact fluorescent lamps. The system is designed for illuminating the desired areas such as residential or commercial areas, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5201

Lamp Source

13 W TC-D G24

281


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

283


PERGE

perge

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a special acrylic UV stabilized diffuser and durable silicone rubber gaskets.

Optical

Direct wall lighting system designed for compact fluorescent lamps.The system is designed for illuminating the desired areas such as residential or commercial areas, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

Code 5211

a r nt

u s . w

w

Code 5212

w

Luminaire

Code

5211 5212

284

Lamp Source

13 W TC-D G24 54 W T5 G5

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


MILET

milet

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by an acrylic UV stabilized diffuser and durable silicone rubber gaskets.

Optical

Direct wall lighting system designed for compact fluorescent lamps.The system is designed for illuminating the desired areas such as residential or commercial areas, etc.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Extrudedaluminiumprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

Code 5221

a r nt

u s . w

w

w

Code 5222

Luminaire

Code

5221 5222

Lamp Source

18 W TC-D G24 54 W T5 G5

285


VIVA

viva

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a glass diffuser and durable silicone rubber gaskets.

Optical

Direct lighting system designed for discharge and fluorescent lamps. The system is designed for efficiently illuminating the desired areas such as residential or commercial areas, entrances, etc.

Electrical

Ballast is a magnetic HPF and incorporated control gear. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5241

286

Lamp Source

70 W HIT Rx7s

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


TERRA WALL

terra wall

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for compact fluorescent lamps.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5271

Lamp Source

18 W TC-D G24

287


ROSSE

rosse

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a special glass diffuser and durable silicone rubber gaskets.

Optical

Indirect wall lighting system designed for PAR lamps.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5281

288

Lamp Source

50 W PAR 20 E27

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


VELA

vela

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a special glass diffuser and durable silicone rubber gaskets.

Optical

Wall lighting system designed for PAR lamps.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5291

Lamp Source

50 W PAR 20 E27

289


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

291


MILENA

milena

Housing

Corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened clear and flat glass and durable silicone rubber gaskets. Well designed die-cast aluminium housing, resistant to heat sensitive integral electrical components.

Optical

Reflector in pure anodized aluminium with tempered safety glass. Down lighting system for effective illumination designed for discharge lamps. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium reflector has been carefully engineered to provide outstanding visual uniformity. The luminaire is designed to Metal Halide Discharge lamps and is used increasingly for outdoor ceiling lighting with high lumen output, low power costs, low failure rate and long life.

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

a u .

Finishing

Light fitting is powder coated. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

w

u s . w

w

Code 5431 Code 5432

Code 5433 Code 5434

Luminaire

Code

5431 5432 5433 5434

292

Lamp Source

35 W HIT G12 70 W HIT G12 35 W HIT G12 70 W HIT G12

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


VETRO

vetro

Housing

Corrosion resistant die-cast aluminium profile with stainless steel screws. Closed by a safety glass diffuser and durable silicone rubber gaskets. Custom lengths available on request.

Optical

Lighting system designed for LEDs able to change a normal surface into a light scenario. For indoor and outdoor applications. The system is designed for efficiently illuminating the desired areas such as entrances or emphasize lines of architecture. High precision collimator for light beam concentration.

Colour Range Independent Blue, Red and green for a full range of smooth and satured shades of colours (16,5 milion additive RGB colours available). Operating temperature -60°C - +55°C. Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

a u .

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5441

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 1980 lm RATED LIFETIME : 100.000 h

293


Wall & Ceilling Luminaires

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. White or single colour light beam for architects and light designers. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting.The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors either in narrow or medium beam. Supplied with control gear kit. The fixtures are available with dichroic colour filters (Red, Yellow, Blue, Green).

a u .

m o c

. e d

a r nt

u s . w

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

w

w

Finishing

Die-cast aluminium body with primary powder coating for high corrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


dora

DORA

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

5451 5452

Lamp Source

35 W HIT G12 70 W HIT G12

295


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

Recessed Luminaires

Recessed luminaires either for floors or walls are able to meet the required lighting requirements. Recessed in-ground luminaires available with appreciable upwardsbeamdirectionfortracingormarkingapplications or to enhance your design.

m o c

. e d

The in-ground recessed luminaires are technically and decoratively developed with a high resistance to corrosive andenvironmentalelements.Thebodyisconstructedfrom corrosion resistant aluminium die-cast with toughened glass. Stainless steel screws and durable silicone rubber gaskets are the highlights of the products.

a r nt

w

w

u s . w

The recessed wall luminaires are used where low mounting heights illumination is required for steps, marking or tracing of aisles and pathways.

297


ALTUS

altus

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a safety glass diffuser and durable silicone rubber gaskets. Two cable glands. The luminaire is supplied with a protective tube.

Optical

In-ground lighting system designed for Metal Halide discharge and PAR lamps with pure anodized aluminium high beam reectors. The system is designed for illuminating the desired areas such as pathways, sculptures, entrances or emphasize lines of architecture.

Electrical

Ballast is a magnetic HPF and incorporated control gear with ignitor and capacitor. Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality ďŹ nish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

6101 6102 6103

298

Lamp Source

70 W HIT G12 150 W HIT G12 120 W PAR 38 E27

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


CARPI

carpi

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a safety glass diffuser and durable silicone rubber gaskets. Two cable glands. The luminaire is supplied with a protective tube.

Optical

In-ground lighting system designed for Metal Halide discharge and PAR lamps with pure anodized aluminium high beam reectors. The system is designed for illuminating the desired areas such as pathways, sculptures, entrances or emphasize lines of architecture.

Electrical

Ballast is a magnetic HPF and incorporated control gear with ignitor and capacitor. Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality ďŹ nish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

6131 6132 6133

Lamp Source

70 W HIT G12 150 W HIT G12 120 W PAR 38 E27

299


ZERO

zero

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a safety glass diffuser and durable silicone rubber gaskets. Two cable glands. The luminaire is supplied with a protective tube.

Optical

In-ground lighting system designed for Metal Halide discharge and PAR lamps with pure anodized aluminium high beam reflectors. The system is designed for illuminating the desired areas such as pathways, sculptures, entrances or emphasize lines of architecture.

Electrical

Ballast is a magnetic HPF and incorporated control gear with ignitor and capacitor. Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked. Finishing Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

6111 6112 6113

300

Lamp Source

150 W HIT G12 70 W HIT G12 PAR 38 120 W E27

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


DION

dion

Housing

Corrosion resistant die-cast aluminium with stainless steel screws inground and for drive-way 8 monochromatic LED fixture for outdoor applications. Closed by a safety glass diffuser and durable silicone rubber gaskets.

Optical

The system is designed for efficiently illuminating the desired areas such as pathways, entrances, steps or emphasize lines of architecture. High precision collimator for light beam concentration. Beam opening: 6°. Upon request, additional lenses are available to achieve a frost effect or vary the beam opening of 30°. LED Colours Available for White, Blue, Red, Green. White colour temperature among 3.500°/4.000°/4500° K upon request. Colour Range: Independent Blue, Red and green for a full range of smooth and satured shades of colours (16,5 million additive RGB colours available). Operating temperature -20°C, +40°C.

Electrical

Electrical Insulation: CLASS I The product is supplied complete with PG7 gland connector, 1.5 mt. power cable and embedding box upon request. The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

Dion

. e d

a r nt

w

w

u s . w

Dion Micra

DION Luminaire

Code

6141

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 440 lm RATED LIFETIME : 100.000 h

DION MICRA Luminaire

Code

6142

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 330 lm RATED LIFETIME : 100.000 h

301


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

303


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Recessed Luminaires

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws inground and for walk-way 4 monochromatic LED fixture for outdoor applications. Closed by a safety glass diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for LEDs able to change a normal surface into a light scenario. For indoor and outdoor applications. The system is designed for efficiently illuminating facades and to emphasize lines of architecture. High precision collimator for light beam concentration. Standard beam angle: 6°

Colour Range

Independent White, Blue, Red and Green for a full range of smooth and satured shades of colours (RGB version available with a DMX external control). Operating temperature -20°C - +40°C.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

a u .

Finishing

Die-cast aluminium body with primary powder coating for high corrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

Luminaire

Code

6411

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, TO 8.000°K, UPON REQUEST. LUMINOUS FLUX : 220 lm RATED LIFETIME : 100.000 h

wedge

w

305


Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by an acrylic opal diffuser and durable silicone rubber gaskets.

a u .

m o c

Optical

Lighting system designed for compact fluorescent lamps. The system is designed for illuminating the desired areas such as low level lighting applications.

. e d

a r nt

Electrical

Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

w

u s . w Finishing

w

Heper + Moonlight Catalogue 2009/10

Die-cast aluminium body with primary powder coating for high corrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

www.moonlight.com.tr


delta

Recessed Luminaires

Luminaire

Code

6221

Lamp Source

a u .

9 W TC-D G23

m o c

. e d

a r nt

u s . w

w

Luminaire

Code

6211

Lamp Source

9 W TC-D G23

delta frame

w

307


SLIM LINE RECESSED SERIES

Code 6231

Housing

Corrosion resistant die-cast aluminium or stainless steel body with stainless steel screws. Closed by an acrylic diffuser and durable silicone rubber gaskets.

Optical

a u .

Lighting system designed for LEDs. The system is designed for illuminating the desired areas such as pathways, entrances, steps or emphasize lines of architecture. Available with blue, red. green, white LEDs with operating temperature -20째C +55째C.

m o c

.Electrical e d

a r nt

Code 6241

su

w

. w

w

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoating for high corrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

Code 6251

Code 6261

308

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Recessed Luminaires

Code 6271

a u .

m o c

. e d

Code 6281

a r nt

u s . w

w

w

Code 6291

Lamp Source

HIGH FLUX LEDs COLOR TEMPERATURE : 5.500째K RATED LIFETIME :100.000h

Code 6301

309


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

311


SLIM LINE RECESSED SERIES

Code 6311

a u .

m o c

Code 6321

. e d

a r nt

u s . w

w

w Code 6331

Code 6341

312

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


Code 6351

a u .

m o c

. e d

a r nt

u s . w

w Code 6361

w

Lamp Source

HIGH FLUX LEDs COLOR TEMPERATURE : 5.500째K RATED LIFETIME :100.000h Code 6371

313


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

w

a r t Architectural Floodlights n u s . w w

Architectural floodlight range combines aesthetics and efficiency in its full line of exterior high intensity discharge or LED lighting. The floodlighting applications involve tasks, environments and surfaces of varying and demanding degrees.The range offers designers and architects enormous flexibility through its modularity and pure optical system.

315


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

aqua pro

w

316

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


AQUA PRO

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Narrow light beam for architects and lighting designers. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors either in narrow or medium beam. Supplied with control gear kit. The fixtures are available with dichroic colour filters ( Red, Yellow, Blue, Green).

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7201 7202

Lamp Source

150 W HIT G12 250 W HIT G12 - G22

317


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

lotto

w

318

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


LOTTO

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Narrow light beam for architects and lighting designers. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors either in narrow or medium beam. Supplied with control gear kit. The fixtures are available with dichroic colour filters ( Red, Yellow, Blue, Green).

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7131 7132

Lamp Source

250 W HIT E40 400 W HIT E40

319


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

ice

w

320

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ICE

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Wide light beam for architects and lighting designers. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors for visual comfort. Supplied with control gear kit. The fixtures are available with dichroic colour filters ( Red, Yellow, Blue, Green).

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7171 7172

Lamp Source

150 W HIT DE Rx7s 70 W HIT DE Rx7s

321


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

linea

w

322

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


LINEA

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors controlled beam. Control gear kit integrated.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7211 7212 7213 7214 7215 7216

Lamp Source

150 W HIT-DE Rx7s 250 W HIT-DE Fc2 400 W HIT-DE Fc2 150 W HST E40 250 W HST E40 400 W HST E40

323


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

solo

w

324

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


SOLO

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. White or single colour light beam for architects and lighting designers. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors either in narrow or medium beam. Supplied with control gear kit.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-cast aluminium body with primary powder coating for high corrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7221 7222

Lamp Source

2000 W HIT-DE 1000 W HIT-DE

325


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

jazz

w

326

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


JAZZ

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Narrow light beam for architects and lighting designers. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors either in narrow or medium beam. Supplied with control gear kit.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7231 7232

Lamp Source

400 W HIT G22 250 W HIT G22

327


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

zoom

w

328

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ZOOM

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. White or single colour light beam for architects and light designers. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors either in narrow or medium beam. Supplied with control gear kit. The fixtures are available with dichroic colour filters ( Red, Yellow, Blue, Green).

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7241 7242

Lamp Source

35 W HIT G12 70 W HIT G12

329


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

zoom spike

w

330

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ZOOM SPIKE

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets.

Optical

SpeciďŹ c lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing landscape applications.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality ďŹ nish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7251

Lamp Source

75 W PAR30 E27

331


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

betta

w

332

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


BETTA

Housing

Corrosion resistant die-cast aluminium body with stainless steel screws. Closed by a tempered safety glass diffuser and durable silicone rubber gaskets. Several adjustment possibilities.

Optical

Specific lighting system designed for architectural lighting. The system is designed for efficiently illuminating the desired areas such as emphasizing architecture and facade surfaces. High precision aluminium reflectors with controlled beam. Control gear kit integrated.

Electrical

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

a u .

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7261 7262

Lamp Source

150 W HIT-DE Rx7s 250 W HIT-DE Fc2

333


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

zoom led

w

334

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


ZOOM LED

Housing

Corrosion resistant die-cast aluminium with stainless steel screws, 8 monochromatic LED fixture for outdoor applications. Closed by a safety glass diffuser and durable silicone rubber gaskets

Optical

Lighting system designed for LEDs able to change a normal surface into a light scenario. For indoor and outdoor applications. The system is designed for efficiently illuminating facades and to emphasize lines of architecture. High precision collimator for light beam concentration. Standard beam angle: 6° Colour Range Independent White, Blue, Red and Green for a full range of smooth and satured shades of colours (RGB version available with a DMX external control). Operating temperature -20°C - +40°C.

Electrical

Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

Finishing

a u .

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7271

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 440 lm RATED LIFETIME : 100.000 h

335


Architectural Floodlights

a u .

m o c

. e d

a r nt

u s . w

w

aqua pro led

w

336

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


AQUA PRO LED

Housing

Corrosion resistant die-cast aluminium with stainless steel screws, 24 monochromatic LED fixture for outdoor applications. Closed by a safety glass diffuser and durable silicone rubber gaskets.

Optical

Lighting system designed for LEDs able to change a normal surface into a light scenario. For indoor and outdoor applications. The system is designed for efficiently illuminating facades and to emphasize lines of architecture. High precision collimator for light beam concentration. Standard beam angle: 6°

Colour Range

Independent White, Blue, Red and Green for a full range of smooth and satured shades of colours (RGB version available with a DMX external control). Operating temperature -20°C - +40°C.

Electrical

Electrical Insulation: CLASS I. The system complies with European standards EN60598 and ENEC marked.

a u .

Finishing

Die-castaluminiumbodywithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

m o c

. e d

a r nt

u s . w

w

w

Luminaire

Code

7281

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 1320 lm RATED LIFETIME : 100.000 h

337


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

339


Linear Led

Code 7293

a u .

m o c

Code 7292

. e d

a r nt

Code 7291

u s . w

w

zenit pro

w

340

Luminaire

Code

7291

Heper + Moonlight Catalogue 2009/10

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500째K, 4.000째K, 4.500째K UPON REQUEST. LUMINOUS FLUX : 1980 lm RATED LIFETIME : 100.000 h

www.moonlight.com.tr


ZENIT PRO

Housing

Corrosion resistant extruded aluminium profile with stainless steel screws. Closed by a diffuser and durable silicone rubber gaskets. Lengths available with 336mm – 636mm – 936mm Custom lengths available on request.

Optical

Lighting system designed for LEDs able to change a normal surface into a light scenario. For indoor and outdoor applications. Light Beam with high precision collimators for light beam concentration. The system is designed for efficiently illuminating the desired areas such as pathways, entrances, steps or emphasize lines of architecture. High precision collimator for light beam concentration. Standard beam angle: 15°-25°

Colour Range

Independent White, Blue, Red and Green for a full range of smooth and satured shades of colours (RGB version available with a DMX external control). Operating temperature -20°C - +40°C.

Electrical

Code 7296

Electrical Insulation: CLASS I The system complies with European standards EN60598 and ENEC marked.

Finishing

Aluminiumextrudedprofilewithprimarypowdercoatingforhighcorrosion resistance. Heper + Moonlight powder coating system engineered to provide the superior quality finish for all weather conditions. Black, grey and dark grey colours standard. RAL colours upon request.

Code 7295

a u .

m o c

a r nt

. e d Code 7294

u s . w

w

w

Luminaire

Code

7294

Lamp Source

HIGH LUMINOUS FLUX LEDs. COLOUR TEMPERATURE : WHITE COLOUR 3.500°K, 4.000°K, 4.500°K UPON REQUEST. LUMINOUS FLUX : 4320 lm RATED LIFETIME : 100.000 h

341


a u .

m o c

. e d

a r nt

u s . w

w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

u s . w

w

w

343


Secondary Reflector Systems

8101

a u .

m o c

. e d

a r nt

w

8111

reflection

w

344

u s . w

8121

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


REFLECTION

Housing

Floodlight of corrosion resistant die-cast aluminium optical housing with stainless steel screws. Closed by a toughened glass and durable silicone rubber gaskets. Well designed die-cast aluminium control gear housing, resistant to heat sensitive integral electrical components. Aluminium canopy for secondary reflector technology. Secondary reflector is engineered for outdoor use. They have a special facetted surface with metalized chrome nickel suitable for external applications.

Optical

Primary reflector in pure anodized aluminium. Indirect lighting system for effective illumination eliminating excess light emission designed for discharge lamps. Symmetrical illumination, achieved with a secondary reflector (complex facets) redirecting the light emitted by the primary reflector.Theprimaryreflectorpartintegratedintothefloodlightradiates the narrow beam light on the secondary reflector mirror field fixed above. The entire reflector radiation of the primary reflector is focused on the secondary reflector screen above. Direct glare is therefore impossible and there is a controlled illumination. Due to the highly specular surface of the facets; the reflected light is perfectly radiated in pre-defined angles of radiation.. Heper + Moonlight reflector technology enables maximum light output. High purity anodized aluminium primary reflector has been carefully engineeredtoprovideoutstandingvisualuniformityandlightemissionto illuminate exactly within the surface of the secondary reflector facets.

Code 8101

Luminaire

Code

m o c

w

w

. w

. e d

a r nt

su

150 W HIT G12

a u .

Electrical

Ballast is a magnetic HPF and incorporated control gear, ignitor and capacitor integrated. Electronic power control gear is available for 150 W HIT lamps. Installation is guaranteed with earthling both in the luminaire and pole. (Electrical Insulation: CLASS I). The system complies with European standards EN60598 and ENEC marked.

Lamp Source

8101

Code 8111

Code 8112

Luminaire

Code

Lamp Source

8111 8112

150 W HIT G12 150 W HIT G12

Code 8121

Code 8122

Luminaire

Code

8121 8122

Lamp Source

150 W HIT G12 150 W HIT G12

345


pol a u .

m o c

. e d

a r nt

w

u s . w

w

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


le

a u .

m o c

. e d

a r nt

Heper + Moonlight Pole Program contains a complete range of lighting columns. Performance, Aluminium, Galvanized Steel types are available in a variety of lengths and diameters and along with range of brackets to accommodate a broad range of luminaires and floodlights.

u s . w

w

w

347


performance pole速 A modular pole system provides flexible and cost effective solutions such as Street Lighting to Traffic Signaling, Telecommunications to Urban Furniture. The system offers multi functionality in urban network planning. Performance Pole is an innovative system developed by Heper+Moonlight. Performance Pole is designed to contribute to the environment to improve the unique street framework and architectural needs. Performance Pole is a multi-function system suitable for simple and efficient accessory attachment. The extruded aluminium pole enables mounting of accessories along its length at any height and position.

a u .

Performance pole system accommodates a variety of accessories as per project theme.

m o c

. e d

Lighting Accessories

Brackets for Road and Pedestrian Lighting Effect Lighting Feature Lighting Carriage Lighting

a r nt

u s . w

Traffic Accessories

w

w

Traffic Monitoring Technology Traffic Lanterns Traffic Outreaches Push Buttons Pedestrian Control Signals Audio Devices Message Signs Parking Meters Parking Control Signage

Signage Accessories

Mounting sets for Traffic, Way Finding Signs, Street Name Signs Variable Message Systems LED Signals

Banner Accessories

Brackets for Advertisement Banners

Telecommunication Accessories

Mounting sets for CCTV, 3G Communication Technology and Antenna Speakers

Top Caps

LED Top Lighting as optional

Base Plate Accessories

Decorative Covers for Base Plates

Anchor Bolts

Galvanized Steel Anchor Bolts with high corrosion resistance

348

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


POLE

Perfect Service

Performance Pole system is the result of years of experience combined with continuous research and product development.With the advantage of designing and manufacturing of lighting luminaires, brackets and various accessories you are able to get the whole service together.

Features • A comprehensive range of pole heights and outreach arms that meet the lighting requirements. • Multi-functional flexibility in accordance with the street and urban lighting requirements. • Performance Pole is engineered to adopt future accessory additions and integration of full functionality.

a u .

• Lighting column, from extruded aluminium with internal structural hot dip galvanized steel core.

m o c

• Removable lower cladding from extruded aluminium. • Four channels allows mounting of various accessories at any height and distance. • Suitable for post top mounting or side entry.

a r nt

• Compatible with a range of amenity, road and floodlighting brackets. • Available with or without a spigot.

u s . w

• Available with the Access Door. • Available from 4m to 12m. • Rust free. Non corroding. • Long life-time.

4 m - 12 m

. e d

• Available with flange plate mounted.

w

• Eco- friendly. Less damage to the environment.

w

• No maintenance required because of the natural characteristics of aluminium. • Anodized or powder coat finish.

Performance Poles Code

Type

H

D1

D2

C

Table 5

Weight (kg)

Terminal Box

13100

Standard

4000

154

200

420

65

OPTIONAL

13101

Standard

5000

154

200

420

75

OPTIONAL

13102

Standard

6000

154

200

420

85

OPTIONAL

13103

Standard

7000

154

200

420

95

OPTIONAL

13104

Standard

8000

226

250

420

160

OPTIONAL

13105

Standard

9000

226

250

420

180

OPTIONAL

13106

Standard

10000

226

250

420

200

OPTIONAL

13107

Standard

11000

226

250

420

220

OPTIONAL

13108

Standard

12000

226

250

420

240

OPTIONAL

349


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

u s . w

w

w

350

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


POLE

a u .

m o c

. e d

a r nt

u s . w

w

w

351


Secondary Reflector Systems

a u .

m o c

. e d

a r nt

w

w

Aluminium Poles

u s . w

Thanks to the innovative design, Aluminium Conical Poles are widely used in pedestrian areas, shopping streets and boulevards, where they provide functional and effective lighting. The post top column can be fitted with single or double light fixture holders.

Features • • • • • • • • • • • • • •

352

A comprehensive range of pole heights and outreach arms that meet the lighting requirements. Attractive, lightweight, flexible and extremely strong and stable. Available root mounted or flange plate mounted. Rust free. Non corroding. Long life-time. Eco- friendly. Less damage to the environment. Ideal for recycling. Aluminium is 100% recyclable. Low –weight. Safer and cheaper assemble. No maintenance required because of the natural characteristics of aluminium. Suitable for post top mounting or side entry. Compatible with a range of amenity, road and floodlighting brackets. Available with the Access Door. Available from 4m to 10m. Anodized or powder coat finish.

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


POLE POLE

a u .

m o c

. e d

a r nt

u s . w

w

w

Galvanized Steel Poles

A complete range of lighting columns suitable for roads, residential streets and amenity areas. The post top column can be fitted with single or double light fixture holders.

Features

A comprehensive range of pole heights that meet the lighting requirements. Available root mounted or flange plate mounted. Suitable for post top mounting or side entry. Compatible with a range of amenity, road and floodlighting brackets. Available with or without a spigot. Available with the Access Door. Available from 4m to 12m. Electrostatic Powder Coating or Liquid paint finish.

353


TECHNICAL DATA

Aluminium Poles + Flange

Table 1

Code

Type

H

D1

D2 C

F

Weight (kg) Terminal Box

11100

Standard

3000

77

77

420

200

6.5

-

11101

Standard

3000

114

114

420

250

12

OPTIONAL

11102

Standard

4000

114

114

420

300

16

OPTIONAL

11103

Standard

3000

90

90

420

300

12

-

11104

Standard

4000

90

90

420

300

17

-

11201

Stepped

3000

77

114

420

250

11

OPTIONAL

11202

Stepped

4000

60

90

420

300

10

-

11203

Stepped

4000

77

114

420

300

14

OPTIONAL

11204

Stepped

3000

60

90

420

250

9

-

11105

Standard

5000

114

114

420

350

20

OPTIONAL

11106

Standard

6000

114

114

420

350

24

OPTIONAL

11207

Stepped

7000

114

150

420

350

30

OPTIONAL

11208

Stepped

8000

114

150

420

350

34

OPTIONAL

12300

Conical

4000

160

114

420

300

-

-

12301

Conical

5000

160

114

420

350

-

-

12302

Conical

6000

160

120

420

350

-

-

12303

Conical

7000

76

145

420

350

-

-

12304

Conical

8000

76

165

420

350

-

-

12305

Conical

9000

76

165

420

350

-

-

12306

Conical

10000

76

165

420

350

-

-

a u .

m o c

. e d

Aluminium Poles + Buried

su

. w D1 D2

a r nt

Type

H1

H2

12100

Standard

3000

500

77

420

6.5

-

12101

Standard

3000

500

114

114

420

12

OPTIONAL

12102

Standard

4000

800

114

114

420

16

OPTIONAL

12103

Standard

3000

500

90

90

420

13

-

12104

Standard

4000

800

90

90

420

18

-

12201

Stepped

3000

500

77

114

420

11

OPTIONAL

12202

Stepped

4000

800

60

90

420

10

-

12203

Stepped

4000

800

77

114

420

14

OPTIONAL

12204

Stepped

3000

500

60

90

420

11.5

-

77

w

w

C

Table 2

Code

Weight (kg) Terminal Box

Terminal Box Manufactured from quality thermo-plastic injection moulded material. Class II. Double Insulation. Protection degree: IP.44 2 * 16 mm2 cables (input/output) Max. 10 A

354

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


TECHNICAL DATA

Galvanized Steel Poles + Flange

Table 3

Code

Type

H

D1

D2 C

21100 21101

Standard

3000

76

76

420

200

18.5

-

Standard

3000

89

89

420

250

22.5

-

21102

Standard

4000

89

89

420

300

31

-

21103

Standard

3000

114

114

420

300

30

OPTIONAL

21104

Standard

4000

114

114

420

300

39

OPTIONAL

21105

Standard

5000

114

114

420

350

49.5

OPTIONAL

21106

Standard

6000

114

114

420

350

58

OPTIONAL

21201

Stepped

3000

60

89

420

250

19

-

21202

Stepped

4000

60

89

420

300

28

-

21203

Stepped

4000

60

114

420

300

42

OPTIONAL

21204

Stepped

4000

76

114

420

300

33

OPTIONAL

21205

Stepped

5000

76

114

420

350

38

OPTIONAL

21206

Stepped

5000

89

114

420

350

43.5

OPTIONAL

21207

Spepped

7000

114

140

420

400

95

OPTIONAL

21208

Stepped

8000

114

140

420

400

113

OPTIONAL

21209

Stepped

9000

114

165

420

400

161

OPTIONAL

21210

Stepped

10000

114

165

420

400

173

OPTIONAL

21301

Conical

3000

60

105

420

300

24

-

21302

Conical

4000

60

120

420

300

33

OPTIONAL

21303

Conical

5000

60

135

420

350

44

OPTIONAL

21304

Conical

6000

60

150

420

350

55

OPTIONAL

21305

Conical

3000

75

120

420

300

27.5

OPTIONAL

21306

Conical

4000

75

135

420

300

36.5

21307

Conical

5000

75

150

420

350

50

21308

Conical

6000

75

165

420

350

62

21309

Conical

7000

75

180

420

400

82

21310

Conical

8000

75

195

420

400

96

. e d

21311

Conical

9000

75

210

420

400

111

OPTIONAL

21312

Conical

10000

75

225

420

400

128

OPTIONAL

21313

Polygonal

10000

89

332

258

OPTIONAL

21401

Special

4000

150

42

-

21314

Conical

11000

75

21315

Conical

12000

75

21316

Special

4000

21317

Polygonal

w

15000

120

90

268

286

100 315

Weight (kg)

Terminal Box

a r nt

su

. w

w

100

F

OPTIONAL

OPTIONAL OPTIONAL

OPTIONAL

600

500

300

420

400

145

OPTIONAL

420

400

162

OPTIONAL

420

800

46

OPTIONAL

500

475

385

OPTIONAL

Galvanized Steel Poles + Burried

m o c

OPTIONAL

420

a u .

Table 4

Code

Type

H1

H2

D1 D2

C

Weight (kg)

22100

Standard

3000

500

76

76

420

19

-

22101

Standard

3000

500

89

89

420

22

-

22102

Standard

4000

800

89

89

420

29

-

22103

Standard

3000

500

114

114

420

30

OPTIONAL

22104

Standard

4000

800

114

114

420

40

OPTIONAL

22105

Standard

5000

800

114

114

420

49

OPTIONAL

22201

Stepped

3000

500

60

89

420

18.5

-

22202

Stepped

4000

800

60

89

420

28

-

22203

Stepped

4000

800

60

114

420

42

OPTIONAL

22204

Stepped

4000

800

76

114

420

32

-

22205

Stepped

5000

800

76

114

420

40

-

22206

Stepped

5000

800

89

114

420

43

OPTIONAL

Terminal Box

355


LAMP DATA

lamp

wattage

socket

(lm)

HME

50 W

E 27

2 000 lm

HQL 50 de Luxe

HME

80 W

E 27

4 000 lm

HQL 80 de Luxe

HME

125 W

E 27

6 500 lm

HQL 125 de Luxe

HME

250 W

E 40

14 000 lm

HIT

35 W

G 12

3 300 lm

HCI-T 35 W

HIT

70 W

G 12

6 600 lm

HCI-T 70 W

HIT

150 W

G 12

14 000 lm

HIT-DE

70 W

RX7s

5 000 lm

HIT-DE

150 W

RX7s

11 250 lm

HIT-DE

250 W

Fc 2

HIT-DE

400 W

HIT

70 W

HIT

150 W

HQL 250 de Luxe

HCI-T 150 W

a u .

HQI-TS 70 W

m o c

e.

d a r t n Fc 2

osram

HQI-TS 150 W

20 000 lm

HQI-TS 250 W

36 000 lm

HQI-TS 400 W

E 27

6 300 lm

E 40

13 500 lm

HCI-TT 150 W

250 W

E 40

20 000 lm

HCI-T 250 W

HIT

400 W

E 40

32 000 lm

HQI-T 400 W

HIE

70 W

E 27

5 700 lm

HCI-E 70 W

HIE

100 W

E 27

8 000 lm

HQI-E/P 100 W

HIE

150 W

E 27

10 500 lm

HQI-E/P 150 W

HIE

250 W

E 40

19 000 lm

HQI-E 250/D

HIE

400 W

E 40

30 000 lm

HQI-E 400/...

HSE

50 W

E 27

3 500 lm

NAV-E 50/E

HSE

70 W

E 27

5 600 lm

NAV-E 70/E

HSE

100 W

E 40

9 500 lm

NAV-E 100 Super

HIT

w

w

356

u s . w

Heper + Moonlight Catalogue 2009/10

HCI-TT 70 W

www.moonlight.com.tr


LAMP DATA

lamp

wattage

socket

(lm)

osram

HSE

150 W

E 40

14 000 lm

NAV-E 150

HSE

250 W

E 40

25 000 lm

NAV-E 250

HSE

400 W

E 40

47 000 lm

NAV-E 400

HST

50 W

E 27

4 400 lm

NAV-T 50 Super

HST

70 W

E 27

6 500 lm

NAV-T 70 Super

HST

100 W

E 40

10 000 lm

NAV-T 100 Super

HST

150 W

E 40

14 500 lm

NAV-T 150

HST

250 W

E 40

27 000 lm

HST

400 W

E 40

48 000 lm

A 60

40 W

E 27

A 60

60 W

A 60

75 W

A 60

100 W

a u .

m o c

e.

NAV-T 250 NAV-T 400

420 lm

ACL 40

710 lm

ACL 60

E 27

940 lm

ACL 75

E 27

1 360 lm

25 W

G 9

230 lm

66725/AM

QT 14

40 W

G 9

460 lm

66740/AM

QT 14

60 W

G 9

790 lm

66660/AM

QT 14

75 W

G 9

1050 lm

66675/AM

QT 18

40 W

B 15d

460 lm

64467/AM

QT 18 路 67mm

60 W

B 15d

790 lm

64481/AM

QT 18

60 W

B 15d

790 lm

64469/AM

QT 18

75 W

B 15d

1 050 lm

64473/AM

QT 18 路 86mm

100 W

B 15d

1 470 lm

64475/AM

QT 26

40 W

E 14

460 lm

QT 14

u s . w

w

w

d a r t n E 27

ACL 100

64861 T/TIM

357


LAMP DATA

lamp

wattage

socket

(lm)

osram

QT 26

60 W

E 14

790 lm

64862 T/TIM

QT 32

60 W

E 27

790 lm

64472/IM

QT 32

75 W

E 27

1050 lm

64474/IM

QT 32

100 W

E 27

1470 lm

64476/IM

QT 32

150 W

E 27

2400 lm

64478/IM

QT 32

250 W

E 27

4210 lm

64480/IM

QT 9-ax

5 W

G 4

60 lm

64405

QT 9-ax

10 W

G 4

130 lm

QT 9-tr

10 W

G 4

130 lm

QT 9-ax

20 W

G 4

QT 12-ax

35 W

QT 12-ax

50 W

QT 12-ax

75 W

m o c

e.

320 lm

d a r t n

64415 64425

GY 6,35 600 lm

64432

u s . w

GY 6,35 910 lm

64440

18 W

G 13

1 350 lm

Lumilux L 18 W

T 26

36 W

G 13

3 350 lm

Lumilux L 36 W

T 26

58 W

G 13

5 200 lm

Lumilux L 58 W

TC-D

10 W

G 24 d-1 600 lm

Dulux D 10 W

TC-D

13 W

G 24 d-1 900 lm

Dulux D 13 W

TC-D

18 W

G 24 d-2 1 200 lm

Dulux D 18 W

TC-D

26 W

G 24 d-3 1 800 lm

Dulux D 26 W

TC-L

18 W

2 G 11

1 200 lm

Dulux L 18 W

TC-L

24 W

2 G 11

1 800 lm

Dulux L 24 W

T 26

w

w

358

a u .

64415

Heper + Moonlight Catalogue 2009/10

GY 6,35 1 450 lm

64450

www.moonlight.com.tr


LAMP DATA

lamp

wattage

socket

(lm)

osram

TC-L

36 W

2 G 11

2 900 lm

Dulux L 36 W

TC-L

55 W

2 G 11

4 800 lm

Dulux L 55 W

TC-T

13 W

GX 24 d-1

900 lm

TC-T

18 W

GX 24 d-2

1 200 lm

Dulux T 18 W

TC-T

26 W

GX 24 d-3

1 800 lm

Dulux T 26 W

TC-TEL

13 W

GX 24 q-1

900 lm

TC-TEL

18 W

GX 24 q-2

1 200 lm

Dulux T/E 18 W

TC-TEL

26 W

GX 24 q-3

1 800 lm

Dulux T/E 26 W

TC-TEL

32 W

GX 24 q-3

2 400 lm

Dulux T/E 32 W

TC-TEL

42 W

GX 24 q-4

PAR 38 · 12°

120 W

PAR 38 · 30°

120 W

PAR 20 · 10°

50 W

Dulux T 13 W

Dulux T/E 13 W

a u .

m o c

e.

3 200 lm

Dulux T/E 42 W

9 300 cd

PAR 38/SP

E 27

3 100 cd

PAR 38/FL

E 27

3 000 cd

Halopar 20 64832 SP

50 W

E 27

1 000 cd

Halopar 20 64832 FL

PAR 30 · 10°

75 W

E 27

6 900 cd

Halopar 30 64841 SP

PAR 30 · 30°

75 W

E 27

2 200 cd

Halopar 30 64841 FL

HI PAR 20 · Spot

35 W

E 27

22 000 cd

HI PAR 20 · FL

35 W

E 27

5 000 cd

HI PAR 30 · Spot

35 W

E 27

37 000 cd

HI PAR 30 · FL

35 W

E 27

7 000 cd

HI PAR 30 · Spot

70 W

E 27

55 000 cd

Powerstar HCI-PAR

HI PAR 30 · FL

70 W

E 27

10 000 cd

Powerstar HCI-PAR

PAR 20 · 30°

u s . w

w

w

d a r t n E 27

Powerstar HCI-PAR

Powerstar HCI-PAR Powerstar HCI-PAR

Powerstar HCI-PAR

359


TECHNICAL DATA

IP First Number

Degree of Protection

0

Non-protected

1

Protected against solid objects greater than 50 mm.

2

Protected against solid subjects greater than 12 mm.

3

Protected against solid objects greater than 2,5 mm.

4

Protected against solid objects greater than 1 mm.

5

Dust protected.

6

Dust-tight.

Second Number

Degree of Protection

0

Non-protected.

1

Protected against dripping water

2

Protected against dripping water when tilted up to 15

3

Protected against spraying water

4

Protected against splashing water

5

Protected against water jets

6

Protected against heavy seas

7

Protected against the immersion

8

Protected against submersion

a u .

m o c

. e d

a r nt

u s . w

w

w

ELECTRICAL INSULATION Class I

Luminaire with fundamental electrical insulation Must be earthed.

Class II

Luminaire with supplementar electrical insulation. No earth required.

Class III

Low voltage supplied luminaire (ex. 12V, 24V) No earth required.

All the luminaires meet the F requirements in accordance with EN 60598-1 and are suitable for mounting on normal inflammable mounting surfaces.

360

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


TECHNICAL DATA

Lux Levels According to BSI Standard General External Areas Car Parks

Standard Maintained Illuminance (lux)

-Low Risk

20

-High Risk

20

-High Risk

-

-

100

-

75

-

50

Covered Pavement and Steps

Service Areas

-Low District Brightness

50

-High District Brightness

200

Floodlighting Buildings and Structures

om

-

-

-

.c

e d a

ua

.

Sales Areas

-

50

-Low Risk

Limiting Glare Index

Pedestrian Precincts

-Low District Brightness

30

-

-High District Brightness

100

-

20

-

-

r t n

u s . w

Storage Areas

Working Areas

50-100

w

w

Roadways on Industrial and Commercial Sites Road, Footway or Footpath

Standard Maintained Illuminance (lux)

Limiting Glare Index

5-10

-

1

-

Perimeter Lighting Checkpoints

150

-

200

-

Gatehouses

Security Area Lighting

Standard Maintained Illuminance (lux)

5-20

LimitingGlareIndex -

361


INDEX

Product

Code

Page

MIRAGE

0101 0102 0103 0104

29

1251 1252

39

1231 1232 1233 1234 1235

43

1241 1242 1243 1244 1245

47

1261 1262 1263 1264 1265 1266

51

OLYMPIC

1281 1282

BISLEY CITY

FIERO NOVA

DIVA

ULTRA

SIENA

193

COOL

1571

197

287 288

VELA

5291

289

MILENA

5431 5432 5433 5434

292

FOCUS

1591

201

IGNIS

1611

205

VETRO

5441

293

ALBUS

1621 1622

209

DORA

5451 5452

295

AURA MEGA

1401

213

ALTUS

6101 6102 6103

298

CARPI

6131 6132 6133

299

ZERO

6111 6112 6113

300

ERA

1411

215

LUNA

1421

217

DIGNA

1431

219

3121

225

57

DIGNA MINI

3130

227

DION

6141

301

STILE

3141

229

DION MICRA

6142

301

1581 1582

61

DIZZY

3161

231

WEDGE

6411

305

65

TROLI

3171

233

DELTA

1631 1632

FUTURA VERSUS

1112

83

TRIO

1121 1122 1123

89

w 1141 1151

3181

235

3191 3192

237

SLIM LINE RECESSED SERIES

6231 6241 6251 6261

308

SLIM LINE RECESSED SERIES

6271 6281 6291 6301

309

SLIM LINE RECESSED SERIES

6311 6321 6331 6341

312

SLIM LINE RECESSED SERIES

6351 6361 6371

313

AQUA PRO

7201 7202

317

LOTTO

7131 7132

319

ICE

7171 7172

321

LINEA

7211 7212 7213 7214 7215 7216

323

SOLO

7221 7222

325

JAZZ

7231 7232

327

ZOOM

7241 7242

329

ZOOM SPIKE

7251

331

BETTA

7261 7262

333

ZOOM LED

7271

335

a r nt

u s . w

97

103

109

RITMO

1501

115

LOFT

1511

121

UNO

1521

125

QUADRATO

1531

131

VENERA

1161 1162

135

VENERA MEGA

1171 1172

137

VISTA

1181

139

VISTA VERSUS

1191

147

ANGORA

1201

153

STUDIO

1221

159

ALPHA

1551

165

REGAL

1561

171

SANTA

1311 1312

175

1313 1314

179

1321 1322 1323

Heper + Moonlight Catalogue 2009/10

183

RING

URBIS WALL

m o c

. e d 3201

VISTA VERSUS MINI

93

307 307

ESSE

ATOS

w

.

6221 6211

ORION

FUGA

1131

ua

DELTA FRAME

SIWA

1541

362

1341 1342

5271 5281

LUNA MINI

83

TERRA

LEGEND

TERRA WALL ROSSE

221

1111

SANTA VERSUS

189

Page

223

FUTURA

IMPERIAL

1331 1332 1333

Code

3101

77

METROPOLITAN

ART

Product

3111

1101 1102 1103

MERLOT

Page

AURA MINI

71

TECNA

Code

ERA MINI

1601 1602 1603 1604 1605 1606

URBIS

Product

239

3221

241

3261 3262

243

3231 3232

245

3251

247

5101 5102

251

FUTURA WALL

5111

253

FUTURA PENDANT

5121

257

TRIO PENDANT

5131

259

SELGE DOWNLIGHT

5141 5142 5143 5144 5145

263

SELGE WALL

5151 5152 5153

266

SELGE WALL LED

5154

267

SELGE MINI WALL

5161 5162

270

SELGE MINI WALL LED

5163

271

ZEN

5401 5402 5403

275

STELA

5411 5412

277

ARIS

5421

279

VIGOR PRO

5181 5182

280

SAVO

5201

281

AQUA PRO LED

7281

337

ZENIT PRO

7291

341

REFLECTION

8101 8111 8112 8121 8122

345

PERGE

5211 5212

284

MILET

5221 5222

285

VIVA

5241

286

www.moonlight.com.tr


a u .

m o c

. e d

a r nt

w

w

u s . w


a u .

m o c

. e d

a r nt

u s . w

w

w

364

Heper + Moonlight Catalogue 2009/10

www.moonlight.com.tr


SALES NETWORK

a u .

m o c

. e d

a r nt

u s . w

w

w

365


a u .

m o c

. e d

a r nt

w

u s . w

w

366


a u .

m o c

. e d

a r nt

u s . w

w

w

367


w

All rights reserved Conception: Heper + Moonlight

© Copyright 2009 MOONLIGHT AYDINLATMA SAN. TIC. LTD. STI.

e-mail: info@moonlight.com.tr

www.moonlight.com.tr www.moonlightlighting.com

1. Organize San. Böl. Türkmenistan Cad. No. 21 Sincan, (06935) ANKARA, TURKIYE T.: +90 312 267 54 30 (pbx) F.: +90 312 267 54 31

MOONLIGHT AYDINLATMA SAN. TIC. LTD. STI.

a u .

m o c

. e d

a r nt

w u s . w


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.