Willy Meyer+Sohn GmbH+Co. KG Stemmessiepener Weg 5 D-58675 Hemer P.O. Box 50 40 D-58665 Hemer Telephone: +49 (0) 23 72/98 91-0 Telefax: +49 (0) 23 72/98 91-48 E-mail: info@meyer-lighting.com www.meyer-lighting.com
a u .
m o c
. e d
a r nt
w
u s . w
w
250 0050 530 - 0610
a u .
m o c
. e d
a r nt
u s . w
w
w
New Products 2009/2010
New Products 2009/2010
a u .
m o c
. e d
a r nt
u s . w
The key note for the "New Products 2009/2010" is the combination of discreet exterior appearance and spohisticated lighting engineering. The luminaires should blend in with the architecture as far as possible. Of course, that does not mean that product design can be disregarded; on the contrary, it manifests itself in well designed and useful details. An example of this is the new Nightfocus series of façade luminaires. The exterior appearance of the rectangular fittings can be described as clear and simple. The high level of technical competence is demonstrated by the precisely graduated scale which surrounds the reflector or the LED module. The new square ground-recessed uplighters which have no visible screws and are practically frameless, are further testimony to clarity in product design.
w
w
Particularly small but high performance light sources make it possible to design extremely compact light fittings which, thanks to their simple design, blend into the background and enhance the surrounding architecture – reliably, night after night.
2
New Products 2009/2010
Light Lock
4
Nightfocus
20
Ground-recessed uplighters
6
Nightpath
32
Ground-recessed uplighters 20 W
14
.
ua
m o c
Ceiling-recessed downlights
37
Surface-mounted downlights
46
. e d
u s . w
a r nt
Ground-recessed uplighters 70 W
16
w
w
Nightspot Mini gobo projector
18
New Products 2009/2010
3
Light Lock accessory for Superlight Compact
Position 1
Maintenance (re-lamping)
The maintenance of lighting installations is often overshadowed by a practical problem: the original installation is carried out under competent supervision and according to the lighting specification. However, for subsequent maintenance work the light fittings are often turned or pivoted for easier handling. Only seldom are they aimed accurately and correctly again afterwards.
u s . w
Light Lock is a new accessory for the Superlight Compact series of floodlights which is designed to ensure that the luminaires are returned to their original aiming position after maintenance. A special mechanism makes it possible to loosen off and pivot the luminaire for easier handling during maintenance and then return it to its original aiming angle afterwards.
w
Light Lock ensures that the desired aiming angles of the luminaries are retained, even after many maintenance intervals.
4
Light Lock
.c
e d a
r t n
w
om
a u .
Position 1
Patent pending
Light Lock Nightvision LS Systemleuchten
Accessory for Superlight Compact Micro / Superlight Compact Mini
19
Part number
Colour
Description
128 0 630 940
black
Light Lock*, to retain original aiming angle of
128 0 630 960
white
luminaire after maintenance
128 0 630 950
silver grey
*Patent pending
30
Accessory for Superlight Compact S / Superlight Compact 35/70/150 W
19
Part number
Colour
Description
128 0 631 940
black
Light Lock*, to retain original aiming angle of
128 0 631 960
white
luminaire after maintenance
128 0 631 950
silver grey
*Patent pending
40
Part number . ... 3.. ...
Description Superlight Compact floodlights with pre-assembled Light Lock*
* Pre-assembled Light Lock simplifies installation on site
When the light fitting has been pivoted, e.g. during re-lamping, Light Lock ensures that it can be returned to the original angle of orientation afterwards. The cap with tilt scale has to be removed from one side of the luminaire. On our Webseite www.meyer-lighting.com a short film that explains the use of Light Lock can be watched or downloaded.
a u .
m o c
. e d
a r nt
w
w
u s . w
Maintenance without Light Lock – the floodlights are pivoted away from their original position and only partially returned to the correct aiming angle. The result: the luminaires are out of focus.
Maintenance with Light Lock – the floodlights are pivoted away from their original position and afterwards are put back to the correct aiming angle. The result: the desired lighting effect is retained.
Nightvision Light Lock LS Systemleuchten
5
Ground-recessed uplighters for high pressure discharge lamps
a u .
. e d
m o c
The demands set on ground-recessed uplighters differ depending on the location where they are to be installed. In addition to the circular luminaires with their typical light cone, we are now offering square luminaires for uniform illumination. These new ground-recessed luminaires come in two different versions: -
a r nt
u s . w
with a wall washer reflector system for faรงade illumination from a short distance with an asymmetrical reflector for faรงade illumination when the luminaires are further away from the building.
In the flush mount version, these luminaires are supplied with a slim frame and without any visible screws. The light fittings are completely level with the surrounding area.
w
w
Alternatively, for uneven areas, there is a version with a wider stainless steel frame which covers the groove around the fixture.
6
Ground-recessed uplighters
Design: mld
a u .
m o c
. e d
a r nt
u s . w
w
w
Ground-recessed luminaires with asymmetrical or wall washer reflectors produce uniform faรงade illumination.
Ground-recessed uplighters
7
186
75
Ground-recessed uplighters
Ground-recessed uplighters Asymmetrical wide beam, for flush installation For ceramic metal halide lamps (HIT-DE-CE) and high pressure sodium lamps (HST-DE), protection class I, IP67 , IK10 cast aluminium housing, double polyester powder coated, asymmetrical high purity aluminium reflector, tilt range 0-5°, all exterior steel parts stainless steel, with flush mounted tempered safety glass, for loads up to max. 5000 kg (according to DIN IEC 60598-2-13), silicon gasket, frame secured by concealed stainless steel screws, stainless steel M20 cable gland with 0.8m cable H05RN-F3G1, integral LPF control gear, HPF available on request, supplied without lamp
380
261
270
Ground-recessed uplighter, for flush installation, asymmetrical distribution Part number
Lamp
Lampholder
Temperature*
C 0 – 180 8 632 014 009
HIT-DE-CE 35 W
Rx7s
70°
0 – 5°
60°
64
85°
m o c 2m
32
General Electric
3,0 m
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 60° C. Part number
Lamp
8 633 014 009
Lampholder
HIT-DE-CE 70 W
Rx7s
Temperature* 75°
e.
Beam angle γ
Tilt range 0 – 5°
HST-DE 70 W
C 0 – 180
C 90 – 270
60°
85°
r t n
ad
ua
.
4m
C 90 – 270
4m
13,0 m
HIT-DE-CE 70W 6600 32lm
8633014 d : 2,0 m
125 2m 64 8,0 m
13,0 m
u s . w
Description
. ... 1.. 009
Luminaire with slip-resistant glass*
* The light distribution becomes more diffused.
Part number 126 0 270 000
3,0 m
w
w
Description Installation sleeve,
polypropylene, compulsory for flush installation
75 186
270
The frameless glass is flush with the surrounding area and is set into a stainless steel rim (part of the installation sleeve).
Lamps 8
Ground-recessed uplighters
HIT-DE-CE
450 300
d : 2,0 m
8,0 m
6m
600
16 8632014
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 65° C. Part number
I (cd/klm)
HIT-DE-CE 35 W 3200 lm
6m
Beam angle γ
Tilt range
HST-DE
135
150
105
105
75
75
I (cd/klm) 600
HIT-DE-CE 35 W 3200 lm
6m
450
135
d : 2,0 m
64 2m
150
105
105
75
75
167
280
230
Part number
Lamp
Lampholder
Temperature*
Tilt range
8 630 014 009
HIT-DE-CE 35 W
Rx7s
70°
0 – 5°
32
.
m o c
General Electric
3,0 m
8,0 m
13,0 m
HIT-DE 70W 6500 32lm
6m 4m
8631014 d : 2,0 m
125
Beam angle γ C 0 – 180
C 90 – 270
60°
85°
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 60° C. Part number
ad
r t n
125
e.
Lamp
8 631 014 009
2m 64
ua
Ground-recessed uplighter, with stainless steel trim, asymmetrical distribution
16 8630014
4m
300
Ground-recessed uplighters Nightvision LS Systemleuchten
Ground-recessed uplighters Asymmetrical wide beam, with stainless steel trim For ceramic metal halide lamps (HIT-DE-CE) and high pressure sodium lamps (HST-DE), protection class I, IP67 , IK10 cast aluminium housing, double polyester powder coated, asymmetrical high purity aluminium reflector, tilt range 0-5°, all exterior steel parts stainless steel, with tempered safety glass flush with trim, for loads up to max. 5000 kg (according to DIN IEC 60598-2-13), silicon gasket, Stainless steel trim and screws, stainless steel M20 cable gland with 0.8m cable H05RN-F3G1, integral LPF control gear, HPF available on request, supplied without lamp
HIT-DE-CE 70 W
Lampholder
Temperature*
Tilt range
Rx7s
75°
0 – 5°
Beam angle γ C 0 – 180
C 90 – 270
60°
85°
HST-DE 70 W
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 65° C. 3,0 m
8,0 m
13,0 m
u s . w
Part number
Description
. ... 1.. 009
Luminaire with slip-resistant glass*
* The light distribution becomes more diffused.
w
w
75 180
271
Accessory for ground-recessed uplighter with stainless steel trim Part number
Description
126 0 269 000
Installation sleeve, polypropylene, for luminaire with overlapping trim
Lamps HIT-DE-CE
HST-DE
Nightvision LS Systemleuchten Ground-recessed uplighters
9
186
75
Ground-recessed uplighters
Ground-recessed uplighters Wall washer, for flush installation For ceramic metal halide lamps (HIT-DE-CE) and high pressure sodium lamps (HST-DE), protection class I, IP67 , IK10 cast aluminium housing, double polyester powder coated, high purity aluminium reflector with wall washer distribution, tilt range 0-5°, all exterior steel parts stainless steel, with flush mounted tempered safety glass, for loads up to max. 5000 kg (according to DIN IEC 60598-2-13), silicon gasket, frame secured by concealed stainless steel screws, stainless steel M20 cable gland with 0.8m cable H05RN-F3G1, integral LPF control gear, HPF available on request, supplied without lamp
380
261
270
a u .
Ground-recessed uplighter, for flush installation, wall washer optics Part number
Lamp
8 632 011 009
Lampholder
HIT-DE-CE 35 W
Rx7s
Temperature* 73°
6m
Beam angle γ
Tilt range 0 – 5°
C 0 – 180
C 90 – 270
14°
100°
4m
64 16
Lamp
8 633 011 009
Lampholder
HIT-DE-CE 70 W
Temperature* 78°
Rx7s
e.
Beam angle γ
Tilt range 0 – 5°
HST-DE 70 W
C 0 – 180
C 90 – 270
14°
100°
ad
r t n
16
2,0 m
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 63° C.
300
8632011
200
d : 0,6 m
32
32
m o c 2m
General Electric
Part number
8,0
64
8,0 m
6m 4m
14,0 m
HIT-DE-CE 70W 6600 16lm
8633011
32
d : 0,6 m 64
2m 64
32
32
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 68° C. Description
. ... 1.. 009
Luminaire with slip-resistant glass*
* The light distribution becomes more diffused.
Part number 126 0 270 000
2,0 m
8,0 m
14,0 m
u s . w
Part number
w
w
Description Installation sleeve,
polypropylene, compulsory, for flush installation
75 186
270
Lamps 10
Ground-recessed uplighters
HIT-DE-CE
I (cd/klm)
HIT-DE-CE 35 W 3200 lm
HST-DE
105
105
75
75
I (cd/klm)
HIT-DE-CE 35 W 3200 lm
6m
300
4m
200
2m 105
105
75
75
8,0
167
280
230
d : 0,6 m 64 16
16
32
2,0 m
Part number
Lamp
Lampholder
Temperature*
Tilt range
8 630 011 009
HIT-DE-CE 35 W
Rx7s
73°
0 – 5°
64
.
14,0 m
HIT-DE 70W 6500 16lm
6m 4m
8631011
32
d : 0,6 m 64
2m 64
32
m o c
General Electric
8,0 m
ua
Ground-recessed uplighter, with stainless steel trim, wall washer optics
8630011
32
Ground-recessed uplighters Nightvision LS Systemleuchten
Ground-recessed uplighters Wall washer with stainless steel trim For ceramic metal halide lamps (HIT-DE-CE) and high pressure sodium lamps (HST-DE), protection class I, IP67 , IK10 cast aluminium housing, double polyester powder coated, high purity aluminium reflector with wall washer distribution, tilt range 0-5°, all exterior steel parts stainless steel, with flush mounted tempered safety glass, for loads up to max. 5000 kg (according to DIN IEC 60598-2-13), silicon gasket, stainless steel trim and screws, stainless steel M20 cable gland with 0.8m cable H05RN-F3G1, integral LPF control gear, HPF available on request, supplied without lamp
Beam angle γ C 0 – 180
C 90 – 270
14°
100°
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 63° C. Part number
ad
8 631 011 009
r t n
32
e.
Lamp
HIT-DE-CE 70 W
Lampholder
Temperature*
Tilt range
Rx7s
78°
0 – 5°
Beam angle γ C 0 – 180
C 90 – 270
14°
100°
HST-DE 70 W
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 68° C. 2,0 m
8,0 m
14,0 m
u s . w
Part number
Description
. ... 1.. 009
Luminaire with slip-resistant glass*
* The light distribution becomes more diffused.
w
w
75 180
271
Accessory for ground-recessed uplighter with stainless steel trim Part number
Description
126 0 269 000
Installation sleeve, polypropylene, for luminaire with overlapping trim
Lamps HIT-DE-CE
HST-DE
Nightvision LS Systemleuchten Ground-recessed uplighters
11
Accessories for ground-recessed uplighters
Accessories for ground-recessed uplighters, asymmetrical wide beam Colour
Description
126 0 271 000
yellow
Colour filter
126 0 273 000
blue
126 0 277 000
red
126 0 278 000
green
Part number
Description
126 0 244 000
Heat block filter,
180
133
Part number
180
133
reduces the surface temperature of the glass
Accessories for ground-recessed uplighters, 154
Colour
Description
126 0 281 000
yellow
Colour filter
126 0 283 000
blue
126 0 287 000
red
126 0 288 000
green
Part number
Description
126 0 242 000
Heat block filter,
a u . 154
m o c
reduces the surface temperature of the glass
. e d
a r nt
u s . w
Accessory for ground-recessed uplighter, flush mounted Part number
Description
126 0 280 000
Suction lifter,
to remove the glass lense during maintenance
w
w
The luminaires are locked into the installation sleeve with an anti-theft device. They are released using a flat-bladed tool such as a spatular.
12
Ground-recessed uplighters
Subsequently the luminaire is lifted out of the installation sleeve by means of a suction lifter.
135
Part number
135
with wall washer optics
Ground-recessed uplighters for metal halide lamps
a u .
m o c
. e d
The range of ground-recessed uplighters with rotationally symmetrical reflectors has been broadened with two further sizes: one shallow version for 20 Watt miniature metal halide lamps with a depth of just 124 mm and a shallow 70 Watt uplighter with a depth of only 150 mm. These products have adjustable optics which allow them to be focused on site. The range of accessories includes optical glass lenses, louvres and a heat block filter to reduce the temperature on the glass.
a r nt
u s . w
w
w
Ground-recessed uplighters
13
Ground-recessed uplighters
Ground-recessed uplighters Rotationally symmetrical, adjustable optics For ceramic metal halide lamps (HIT-TC-CE) protection class I, IP67 , IK10 die cast aluminium housing, double powder coated, rotationally symmetrical reflector, adjustable, tilt range 0-15°, lockable, all exterior steel parts are stainless steel, tempered safety glass flush with frame, for loads up to max. 5000 kg (according to DIN IEC 60598-2-13), silicon gasket, stainless steel trim ring with 6 V4A stainless steel screws, M20 cable gland, with 0.8 m cable type H07RN-F3G1,5, integral potted electronic ballast, supplied without lamp
124
200
154 180
Ground-recessed uplighter, adjustable optics, rotationally symmetrical, narrow beam Part number
Lamp
Lampholder
Temperature*
Tilt range
Beam angle γ
8 616 011 009
Philips CDM-Tm 20 W
PGJ5
74°
0 – 15°
8°
4,0
4,0 3m
16
2,0 m
Lamp
Lampholder
Temperature*
Tilt range
Beam angle γ
8 617 011 009
General Electric
GU6.5
70°
0 – 15°
8°
ad
CMH 20 W/ Osram HCI-TF 20 W
r t n
* with the heat block filter (see accessories) the surface temperature of the glass is reduced to 63° C
u s . w
e.
Ground-recessed uplighter, adjustable optics, rotationally symmetrical, medium wide beam Part number
Lamp
Lampholder
Temperature*
Tilt range
Beam angle γ
8 616 012 009
Philips CDM-Tm 20 W
PGJ5
68°
0 – 15°
25°
w
Part number
Lamp
8 617 012 009
General Electric
4,0
4,0
3m
16
Temperature*
Tilt range
Beam angle γ
GU6.5
64°
0 – 15°
25°
CMH 20 W/
2,0 m
10,0 m
4,0
2,0
8,0
4,0
3m
HIT-TC-CE 20 W 2,0 2,0 8,0 4,0 1600 lm
2,0
8,0
4,0 8,0
32
64 2,0
4,0
4,0
2,0
8,0
135
4,0
10,0 m
HIT-TC-CE 20 W 2,0 2,0 8,0 4,0 1600 lm
2,0
8,0
8617012
4,0
16
4,0 32
2,0 m
64 2,0
4,0
d : 0,2 m
32
6,0 m
Once aimed at the desired angle, the reflector can be locked into place with screws so that it is not misaligned during maintenance.
Lamps HIT-TC-CE
800
d : 0,2 m
32
6,0 m
5m
1200
8616012
4,0
16
Description Luminaire for installation flush with surrounding surface
Ground-recessed uplighters
15°
d : 0,2 m
(in combination with installation sleeve 126 0 232 060)
14
75
8617011
8,0
*The light distribution becomes more diffuse
Part number . ... ... 069
105
75
I (cd/klm)
* with the heat block filter (see accessories) the surface temperature of the glass is reduced to 57° C
Luminaire with slip resistant glass*
135
105
HIT-TC-CE 20 W 4,0 8,0 4,0 1600 lm
6,0 m
5m
8,0
Description
10,0 m
135
8,0
4,0
3m
Osram HCI-TF 20 W
. ... 1.. 009
16
2,0 m
Lampholder
Part number
4,0
8,0
8,0
* with the heat block filter (see accessories) the surface temperature of the glass is reduced to 61° C
w
6,0 m
5m
8000
d : 0,2 m
m o c
* with the heat block filter (see accessories) the surface temperature of the glass is reduced to 67° C
8,0
12000
8616011
8,0
16
4,0
I (cd/klm)
HIT-TC-CE 20 W 4,0 8,0 4,0 1600 lm
4,0
8,0
8,0
Part number
a u .
5m
HIT-TC-CE
10,0 m
135
105
105
75
75
15°
Accessories for ground-recessed uplighters
Accessories for ground-recessed uplighters, 191
180
narrow and medium wide beam Part number
Description
126 0 232 000
Polypropylene installation sleeve, for luminaires with overlapping trim ring (for luminaires . . . . . . . 009)
196
198
Part number
Description
126 0 232 060
Polypropylene installation sleeve,
185
for luminaires with trim ring for flush mounting (for luminaires . . . . . . . 069)
196
78
Part number
Colour
Description
126 0 241 000
yellow
Colour filter
126 0 243 000
blue
126 0 247 000
red
126 0 248 000
green
a u .
78
m o c
. e d
Part number
Description
126 0 240 000
Heat block filter,
reduces the surface temperature on the glass
u s . w
78
15
a r nt
Part number
Description
126 0 239 940
Radial louvre, to reduce lateral glare
w
w 78
Accessories for ground-recessed uplighters, narrow beam Part number
Description
126 0 249 000
Ribbed glass spreader lense, for linear beam control, continuously adjustable through 360째
Part number
Description
226 0 161 000
Connection box, for single connection to one luminaire or for through wiring with buried cable. For luminaires supplied with cable and installation sleeve.
Ground-recessed uplighters
15
Ground-recessed uplighters
Ground-recessed uplighters Rotationally symmetrical, adjustable optics For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP67 , IK10 cast aluminium housing, double polyester powder coated, rotationally symmetrical aluminium reflector, adjustment range 0-25°, lockable, all exterior steel parts are stainless steel, tempered safety glass flush with trim ring, for loads of up to max. 5000 kg (according to DIN IEC 60598-2-13), silicon gasket, stainless steel trim ring and 6 stainless steel screws, M20 stainless steel cable gland with 0.8 m cable type H05RN-F-3G1, integral LPF control gear, HPF available on request, supplied without lamp
154
150
280
Ground-recessed uplighter, adjustable optics, rotationally symmetrical narrow beam Part number
Lamp
Lampholder
Temperature* Tilt range
Beam angle γ
8 623 011 009
HIT-TC-CE 70 W
G8.5
78° C
10°
0 – 25°
8m 16 16
* With the heat block filter (see accessories) the surface temperature of the glass is reduced to 69° C.
16
64
64
m o c 32
16
32
4,0 m
ua
. 32
32
4m
HIT-TC-CE 70 W 16 16 166900 lm
16
10,0 m
I (cd/klm) 8000 6000
8623011
32
d : 0,4 m
4000 135 105
16,0 m
75
e.
d a r t n
u s . w
Ground-recessed uplighter, adjustable optics, rotationally symmetrical medium wide beam Part number Lamp Lampholder Temperature* Tilt range Beam angle γ HIT-TC-CE 70 W G8.5 74° C 0 – 25° 23° 8 623 012 009 * With the heat block filter (see accessories) the surface temperature of the glass is reduced to 66° C.
Part number
Description
I (cd/klm) 8m 4,0
4m
16
. . . . . . . 069
Luminaire for flush installation
Lamps Ground-recessed uplighters
16
HIT-TC-CE 70 W 8,0 6900 lm 16 32
8,0
1600 1200
8623012 d : 0,4 m
800 135
4,0 8,0
105 10,0 m
16,0 m
75
25°
(in combination with installation sleeve 126 0250 060)
16
64
4,0 m
* The light distribution becomes more diffused
Description
16 8,0
. . . . 1 . . 009 Luminaire with slip-resistant glass*
Part number
8,0
8,0 32
w
w
25°
HIT-TC-CE
Accessories for ground-recessed uplighters
Accessories for ground-recessed uplighters with adjustable optics, narrow and medium wide beam Part number
Description
126 0 250 000
Installation sleeve, polypropylene,
231
274
for luminaires with overlapping trim ring (for luminaires . . . . . . . 009)
280
Part number
Description
126 0 250 060
Installation sleeve, polypropylene, for luminaires with trim ring for flush installation
26
236
(for luminaires . . . . . . . 069)
Part number
Description
126 0 238 000
Carrier ring,
129
for colour filters and ribbed glass spreader lense
26
125
Part number
Colour
Description
126 0 251 000
yellow
Colour filter,
126 0 253 000
blue
in combination with carrier ring
126 0 257 000
red
126 0 258 000
green
Part number
Description
126 0 259 000
Heat block filter, set with double filter,
129
a u .
m o c
. e d
to reduce the surface temperature of the glass
a r nt
u s . w
Part number
Description
126 0 120 940
Radial louvre, to reduce lateral glare
w
w
125
Accessories for ground-recessed uplighters with adjustable optics, narrow beam Part number
Description
126 0 122 000
Ribbed glass spreader lense, for linear beam control, continuously adjustable 360째, in combination with carrier ring
Part number
Description
226 0 161 000
Connection box, for single connection of one luminaire or for through wiring with buried cable. For luminaires with cable and installation sleeve.
Ground-recessed uplighters
17
Nightspot Mini gobo projector for metal halide lamps
a u .
The Nightspot Mini series has been extended to include a mini gobo projector for 20 and 35 Watt miniature metal halide lamps. It is suitable for projecting sharp images and logos over a short distance, as is often required in landscape and architectural lighting. The very compact dimensions make discreet installation possible.
d a r t n
e.
m o c
Design: Roy Fleetwood
u s . w
w
w
The gobo projector makes it possible to project sharp edged images using standard or custom made gobos.
18
Nightspot Mini
108
187
1 10 °
283
116
Ø7
77
93
30
I (cd/klm) 90 60 600
HIT-TC-CE 20 W 1600 lm 8966042
Ø 0,67 m Ø 0,45 m
900
497lx 221lx 124lx Abstand/Distance
I (cd/klm) 90 60
3m
8968042
4m
80lx 5m
55lx
Ø 1,35 m Ø 1,12 m
497lx 221lx 124lx
I (cd/klm) 90 60
2m
3m
4m
5m
994lx 442lx 249lx 159lx 110lx Abstand/Distance
I (cd/klm) 90 60 30
w
2m
3m
w
4m
HIT-TC-CE 35 W 3200 lm 8969042
5m
8 966 062 009
white
20 W
8 966 052 009
silver grey
Part number
Colour
8 968 042 009
black
m o c
ad
e.
r t n
white
silver grey
Lamp
.
General Electric
2.0 kg
Beam angle 13°
Lampholder Weight
Beam angle
GU6.5
13°
2.0 kg
CMH 20 W/
Osram HCI-TF 20 W
Nightspot Mini gobo projector 35 W, 85 mm focal length Part number
Colour
Lamp
Lampholder Weight
Beam angle
8 967 042 009
black
Philips CDM-Tm
PGJ5
13°
8 967 062 009
white
35 W
8 967 052 009
silver grey
Part number
Colour
Lamp
Lampholder Weight
Beam angle
8 969 042 009
black
General Electric
GU6.5
13°
8 969 062 009
white
CMH 35 W/
8 969 052 009
silver grey
Osram HCI-TF 35 W
2.0 kg
6m
Ø 1,35 m Ø 1,12 m
Ø 0,90 m Ø 0,67 m
Ø 0,45 m
900
PGJ5
6m
Ø 1,35 m
Ø 0,45 m
1200
Lampholder Weight
Philips CDM-Tm
55lx
Ø 1,12 m
Ø 0,67 m
900
80lx
Ø 0,90 m
30
Lamp
black
u s . w
HIT-TC-CE 35 W 3200 lm 8967042
Colour
8 966 042 009
8 968 052 009
Ø 0,45 m
Abstand/Distance
Part number
8 968 062 009
Ø 0,67 m
ua
Nightspot Mini gobo projector 20 W, 85 mm focal length
6m
Ø 0,90 m
30
900
600
2m
HIT-TC-CE 20 W 1600 lm
1200
600
Ø 0,90 m
30
1200
600
Ø 1,35 m Ø 1,12 m
2.0 kg
994lx 442lx 249lx 159lx 110lx
1200 Abstand/Distance
2m
3m
4m
5m
6m
Accessories for Nightspot Mini gobo projector 20/35 W, 85 mm focal length 37,5
Part number
Colour
Description
129 0 451 000
yellow
Dichroic colour filter,
129 0 453 000
blue
internally fitted
129 0 457 000
red
129 0 458 000
green
Part number
Example
Description
129 0 459 000
waves
Standard gobos
129 0 460 000
stars
129 0 461 000
hatch
Lamps HIT-TC-CE
HIT-TC-CE
NightvisionMini LS Systemleuchten Nightspot
19
Nightspot Mini Nightvision LS Systemleuchten
Nightspot Mini gobo projector For ceramic metal halide lamps (HIT-TC-CE) protection class I, IP65 , IK08 polyester powder coated, rotationally symmetrical aluminium reflector, focusable projection lense, carrier for gobos and colour filters, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, mounting box: 2 drilled holes Ø 7 mm, spacing 77 x 93 mm, articulated joint and tilt range 110°, luminaire housing can be turned through 360°, cable entry for 7-10 mm recessed or surface mounted cable, integral electronic ballast, supplied without lamp
Nightfocus façade luminaires for metal halide lamps and LEDs
a u .
The new Nightfocus series of façade luminaires has a clear concept of discreet, nearly “invisible” installation. The product design follows this aim uncompromisingly, resulting in a clear and simple rectangular body. Miniature metal halide lamps and LEDs made it possible to design an extremely compact luminaire. This series meets the demands of sophisticated architectural lighting; gimbal mounted adjustable reflectors or LED modules with various distributions can be focused with precision and then locked into place. A modular system of two luminaires offers a high degree of flexibility for many lighting tasks.
d a r t n
e.
w
u s . w
w
20
Nightfocus
m o c
Design: Roy Fleetwood
a u .
The Nightfocus range offers a choice of rotationally symmetrical reflectors with various beam angles or asymmetrical reflectors. Alternatively, these luminaires are available with LEDs in various distributions.
m o c
. e d
Two modules with differing wattages and beam distributions can be combined together as up- and downlight.
a r nt
u s . w
w
w
The luminaires for mounting lengthwise are suitable for situations where the housing should not protrude from the faรงade, e.g. on ledges or window reveals.
Nightfocus
21
Nightfocus
130
191
110
Nightfocus Rotationally symmetrical narrow beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated,gimbal mounted high purity aluminium reflector, adjustment range 0-15°, all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, wall mounting: 2 drilled holes Ø 7 mm, spacing 60 mm, cable entry: up to Ø 13 mm recessed cable, integral electronic ballast, supplied without lamp
60
61
7 102
a u .
Nightfocus 20 W, gimbal mounted reflector, rotationally symmetrical, narrow beam Part number
Colour
Lamp
Lampholder Weight
8 391 041 009
black
Philips CDM-Tm
8 391 061 009
white
20 W
8 391 051 009
silver grey
PGJ5
3.4 kg
6m
Beam angle γ 7°
4,0
4m
8,0
2m
16
2,0
Part number
Colour
Lamp
Lampholder Weight
Beam angle γ
8 393 041 009
black
General Electric
GU6.5
7°
8 393 061 009
white
CMH 20 W/
8 393 051 009
silver grey
Osram HCI-TF 20 W
3.4 kg
r t n
u s . w
4,0
2,0 m
c . e
ad
HIT-TC-CE 20 W 1600 lm
Colour
Lamp
Lampholder Weight
8 392 041 009
black
Philips CDM-Tm
8 392 061 009
white
35 W
8 392 051 009
silver grey
Part number
Colour
8 394 041 009
black
8 394 061 009
white
8 394 051 009
silver grey
w
w Lamp
General Electric
PGJ5
3.4 kg
Beam angle γ 9°
Beam angle γ 9°
3.4 kg
CMH 35 W/
12000
14,0 m
Ø 1,26 m
15°
Ø 0,76 m Ø 0,50 m Ø 0,25 m
4263lx 1066lx 474lx 266lx 171lx Abstand/Distance
2m
4m
6m
8m
10 m
I (cd/klm) 6m
8,0
4m
16
2m
32
2,0
HIT-TC-CE 35 W 3200 lm
4,0
8,0
4,0
4,0 8392041
2,0
2,0
60
LPH : 0,2 m 16
4,0
HIT-TC-CE 35 W 3200 lm
8000
14,0 m
Ø 1,51 m
15°
Ø 1,26 m Ø 1,01 m
Ø 0,76 m
Osram HCI-TF 35 W
Ø 0,50 m
2131lx 947lx 533lx 341lx 237lx Abstand/Distance
4m
6m
8m
10 m
12 m
Nightfocus 20/35 W, gimbal mounted reflector, rotationally symmetrical, narrow beam Part number Description
161 130
Luminaire to be mounted lengthwise 191
. ... 1.. 009
Lamps 22
Nightfocus
HIT-TC-CE
30
12000
8,0 m
8394041
90
32
2,0
2,0 m
GU6.5
30
Ø 1,01 m
8393041
2,0
Lampholder Weight
8000
2,0
2,0
8,0 m
Nightfocus 35 W, gimbal mounted reflector, rotationally symmetrical, narrow beam Part number
LPH : 0,2 m 8,0
om 2,0
90 60
4,08391041
4,0
8,0
4,0
I (cd/klm)
HIT-TC-CE 20 W 1600 lm
16 2,0
2,0
HIT-TC-CE
130
191
110
Nightfocus Nightvision LS Systemleuchten
Nightfocus Rotationally symmetrical wide beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, gimbal mounted high purity aluminium reflector, adjustment range 0-15°, all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, wall mounting: 2 drilled holes Ø 7 mm, spacing 60 mm, cable entry: up to Ø 13 mm recessed cable, integral electronic ballast, supplied without lamp
60
61
7 102
I (cd/klm) 90
90
60
200
6m
60 4m
HIT-TC-CE 20 W 1600 lm
1,0 2,0
400
8,0
4,0
16
2m
600
2,0
1,0 2,0 m
15°
Colour
Lamp
Lampholder Weight
8 391 043 009
black
Philips CDM-Tm
PGJ5
LPH : 0,2 m 16 8,0
8 391 063 009
white
20 W
8 391 053 009
silver grey
Part number
Colour
8 393 043 009
black
1,0
1,0 8,0 m
HIT-TC-CE 20 W 1600 lm
Ø 8,04 m
8 393 053 009
Ø 1,61 m
222lx Abstand/Distance
55lx
2m
25lx
4m
6m
90
90
60
200
6m
60 4m
16
8,0
32 4,0
2,0
15°
w
4m
5m
CMH 20 W/
Osram HCI-TF 20 W
Nightfocus 35 W, gimbal mounted reflector, rotationally symmetrical, wide beam Lampholder Weight
Beam angle γ
Philips CDM-Tm
PGJ5
44°
LPH : 0,2 m 32 16
8 392 063 009
white
35 W
8 392 053 009
silver grey
Part number
Colour
Lamp
Lampholder Weight
Beam angle γ
8 394 043 009
black
General Electric
GU6,5
44°
8 394 063 009
white
CMH 35 W/
8 394 053 009
silver grey
Osram HCI-TF 35 W
3.4 kg
14,0 m
Ø 6,43 m
49lx 6m
44°
3.4 kg
Lamp
Ø 3,22 m
Abstand/Distance
Beam angle γ
GU6,5
black
Ø 4,82 m
71lx
Lampholder Weight
Colour
Ø 4,02 m
111lx
44°
8 392 043 009
Ø 5,63 m
8394043
silver grey
Beam angle γ
Part number
8,0 m
HIT-TC-CE 35 W 3200 lm
white
General Electric
3.4 kg
8392043
2,0
2,0
w
2,0 m
r t n
10 m
8,0 4,0
2,0
2m
600
8m
9lx
HIT-TC-CE 35 W 3200 lm
2,0 4,0
400
14lx
u s . w
I (cd/klm)
ad
8 393 063 009
Ø 4,82 m Ø 3,22 m
e. Lamp
.
m o c
14,0 m
Ø 6,43 m
8393043
ua
Part number
8391043
4,0 2,0
1,0
Nightfocus 20 W, gimbal mounted reflector, rotationally symmetrical, wide beam
36lx 7m
3.4 kg
28lx 8m
Nightfocus 20/35 W, gimbal mounted reflector, rotationally symmetrical, wide beam Part number Description
161 130
Luminaire to be mounted lengthwise
191
. ... 1.. 009
Lamps HIT-TC-CE
HIT-TC-CE
Nightvision LS Systemleuchten Nightfocus
23
Nightfocus
130
191
110
Nightfocus Asymmetrical wide beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, asymmetrical aluminium reflector, rotatable 4 x 90°, all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, wall mounting: 2 drilled holes Ø 7 mm, spacing 60 mm, cable entry: up to Ø 13 mm recessed cable, integral electronic ballast, supplied without lamp
60
61
7
102
silver grey
169lx
Abstand/Distance
Main beam angle
GU6.5
43°
8 393 064 009
white
CMH 20 W/
8 393 054 009
silver grey
Philips CDM-Tm
white
35 W
8 392 054 009
silver grey
Colour
8 394 044 009
black
8 394 064 009
white
8 394 054 009
silver grey
w
w Lamp
General Electric
PGJ5
43°
3.4 kg
3,9 m
2m
Abstand/Distance
Main beam angle 43°
CMH 35 W/
11lx
3m
7lx
4m
84lx
1m
2m
37lx
337lx
1m
I (cd/klm) 90
3m
13lx
4m
5m
9,0 m
84lx 2m
37lx 3m
21lx 4m
9lx
600
6m
13lx 5m
9lx 6m
161 130
191
Luminaire to be mounted lengthwise
The asymmetrical reflector unit can be rotated 4 x 90°, thus changing the direction of the light output.
Lamps 24
Nightfocus
150 30
Nightfocus 20/35 W, asymmetrical wide beam Part number Description . ... 1.. 009
90
60
450
21lx
6,7 m 4,5 m
Abstand/Distance
6m
11,2 m
8394044
2,2 m
5lx
13,4 m
HIT-TC-CE 35 W 3200 lm
Osram HCI-TF 35 W
5m
9,0 m 6,7 m
337lx
GU6.5
19lx
11,2 m
8392044
2,2 m
600
6m
13,4 m
HIT-TC-CE 35 W 3200 lm 4,5 m
Lampholder Weight 3.4 kg
42lx
1m
450
5lx
13,4 m
7,9 m
black
8 392 064 009
169lx Abstand/Distance
5m
30
11,2 m
5,9 m
8 392 044 009
Main beam angle
2,2 m
3,9 m
u s . w
Lampholder Weight
4m
6,7 m 4,5 m
3,9 m
Lamp
3m
7lx
9,0 m
8393044
2,0 m
Colour
HIT-TC-CE 20 W 1600 lm
2,0 m
Part number
c . e
d a r t n
Osram HCI-TF 20 W
Nightfocus 35 W, asymmetrical wide beam
Part number
3.4 kg
11lx
5,9 m
Lampholder Weight
General Electric
19lx
5,9 m
Lamp
black
2m
3,9 m
Colour
8 393 044 009
42lx
1m
2,0 m
Part number
2,0 m
om 2,2 m
11,8 m
8 391 054 009
a u .
6,7 m 4,5 m
150
11,8 m
43°
3.4 kg
11,8 m
PGJ5
20 W
90
60
11,8 m
Philips CDM-Tm
white
9,0 m
8391044
9,8 m
black
8 391 064 009
90
11,2 m
9,8 m
8 391 044 009
I (cd/klm)
13,4 m
HIT-TC-CE 20 W 1600 lm
9,8 m
Main beam angle
9,8 m
Lampholder Weight
7,9 m
Lamp
5,9 m
Colour
7,9 m
Part number
7,9 m
Nightfocus 20 W, asymmetrical wide beam
HIT-TC-CE
HIT-TC-CE
110
Nightfocus Nightvision LS Systemleuchten
Nightfocus LED With 5 x 1 W high performance LEDs, integral thermal monitoring device, protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, gimbal mounted LED board, adjustment range 0-15°, all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, wall mounting: 2 drilled holes Ø 7mm, spacing 60mm, cable entry: up to Ø 13mm recessed cable, on-board driver and integral transformer
191
130
60 61
7
102
I (cd/klm) 90
6m
4,0
1,0
1,0
60 6000
4m
30
2m
9000
8,0 2,0
4,0
4,0
1,0
2,0
LED 4,0 439 lm
1,0
Part number
Colour
Lamp
2,0
8395046019
8 395 046 019
black
5 x LED 1 W warm white
d : 0,2 m
8 395 066 019
white
8 395 056 019
silver grey
Part number
Colour
8 395 045 019
black
8 395 065 019
white
8 395 055 019
silver grey
1,0
12000 2,0 m
15°
8,0 m
Ø 2,03 m Ø 1,63 m
8395045019
Ø 1,22 m Ø 0,81 m Ø 0,41 m
996lx 249lx 111lx 2m
4m
6m
6m
2m
0,5
0,5
8,0 m
w
5,3 m
375lx Abstand/Distance
0,6 m
0,3 m
3,6 m 1,8 m
10,7 m
7,1 m
8395045029
94lx
2m
4m
42lx
23lx
6m
8m
15lx
10lx
10 m
90
60
6m 1,0
60 30
800
0,5
1,0 0,5 0,5
4m
30
4,0 2,0 2m
1200
8,0
LED 439 1,0 lm
15°
c°
1,0
0,5 8,0 m
Lumen 100 %
0%
Beam angle γ
3.4 kg
11°
Beam angle γ
Nightfocus LED, gimbal mounted, linear beam spread Part number
Colour
Lamp
Weight
C 0 – 180
C 90 – 270
8 395 046 029
black
5 x LED 1 W warm white
3.4 kg
9°
48°
8 395 066 029
white
8 395 056 029
silver grey
Part number
Colour
Lamp
Weight
Beam angle γ C 0 – 180
C 90 – 270
8 395 045 029
black
5 x LED 1 W neutral white
3.4 kg
9°
48°
8 395 065 029
white
8 395 055 029
silver grey
Nightfocus LED, gimbal mounted, wide beam Part number
Colour
Lamp
Weight
Beam angle γ
8 395 046 059
black
5 x LED 1 W warm white
3.4 kg
33°
d : 0,2 m
8 395 066 059
white
8 395 056 059
silver grey
Part number
Colour
Lamp
Weight
Beam angle γ
8 395 045 059
black
5 x LED 1 W neutral white
3.4 kg
33°
8 395 065 059
white
8 395 055 059
silver grey
0,5
1600 2,0 m
Weight
8395046059
0,5
4,0 2,0
0,5
11°
12 m
I (cd/klm) 90
Beam angle γ
3.4 kg
8,9 m
1,5 m
LED 439 lm
14,0 m
1,2 m
2,0 m
d : 0,2 m
2,0
w
4000
0,9 m
3000
5 x LED 1 W neutral white
Weight
8395046029
1,0
1,0
2,0
8,0
0,5
4,0
4,0
4m
LED 439 lm 2,0
2,0
60 2000
10 m
u s . w
I (cd/klm) 90
8m
d a r t n
40lx
1,8 m
Abstand/Distance
62lx
e. Lamp
.
m o c
14,0 m
LED 439 lm
ua
Nightfocus LED, gimbal mounted, narrow beam
1,0
14,0 m
The integral thermal monitoring device adjusts the light output if a change in temperature makes it necessary. This feedback function contributes to a longer life span of the LED modules.
Nightfocus LED, gimbal mounted Part number Description . ... 1.. 009
Luminaire to be mounted lengthwise
Light source LEDs, replacement modules available
Nightvision LS Systemleuchten Nightfocus
25
Nightfocus Modular System Produktname
110
Nightfocus Modular System For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, aluminium reflector, all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, wall mounting: 2 drilled holes Ø 7 mm, spacing 60 mm, cable entry: up to Ø 13 mm recessed cable, integral electronic ballast, supplied without lamp.
383
130
60
61
7
Kategorie
102
a u .
m o c
Lamp HIT-TC-CE Philips CDM-Tm 20/35 W, PGJ5
a r nt
2
asymmetric beam
3
Philips CDM-Tm 20 W
Philips CDM-Tm 35 W
Philips CDM-Tm 20 W
Philips CDM-Tm 35 W
Philips CDM-Tm 20 W
Philips CDM-Tm 35 W
Philips CDM-Tm 20 W
8 399 0.0 009
8 399 1.0 009
8 399 4.0 009
8 399 5.0 009
8 399 6.0 009
8 399 7.0 009
Philips CDM-Tm 35 W
8 399 0.1 009
8 399 1.1 009
8 399 4.1 009
8 399 5.1 009
8 399 6.1 009
8 399 7.1 009
8 399 0.4 009
8 399 1.4 009
8 399 4.4 009
8 399 5.4 009
8 399 6.4 009
8 399 7.4 009
Philips CDM-Tm 35 W
8 399 0.5 009
8 399 1.5 009
8 399 4.5 009
8 399 5.5 009
8 399 6.5 009
8 399 7.5 009
Philips CDM-Tm 20 W
8 399 0.6 009
8 399 1.6 009
8 399 4.6 009
8 399 5.6 009
8 399 6.6 009
8 399 7.6 009
Philips CDM-Tm 35 W
8 399 0.7 009
8 399 1.7 009
8 399 4.7 009
8 399 5.7 009
8 399 6.7 009
8 399 7.7 009
wide beam
2
1
wide beam
narrow beam
1
Light source
asymmetric beam 3
Downlight module
Uplight module narrow beam
. e d
Philips CDM-Tm 20 W
black
8 399 .6. 009
white
8 399 .5. 009
silver grey
26
w
w
8 399 .4. 009
u s . w
Nightfocus Modular System
1.2
1.3
2.1
2.2
2.3
3.1
3.2
3.3
Nightfocus Modular System
1.1
a u .
3
ad
2
HIT-TC-CE Osram HCI-TF 20/35 W, GU6.5
Uplight module narrow beam
1
General Electric CMH 35 W
General Electric CMH 20 W
General Electric CMH 35 W
General Electric CMH 20 W
General Electric CMH 35 W
General Electric CMH 20 W
Osram HCI-TF 35 W
Osram HCI-TF 20 W
Osram HCI-TF 35 W
Osram HCI-TF 20 W
Osram HCI-TF 35 W
Osram HCI-TF 20 W
8 390 7.0 009
8 390 6.0 009
8 390 5.0 009
8 390 4.0 009
8 390 1.0 009
8 390 0.0 009
8 390 7.1 009
8 390 6.1 009
8 390 5.1 009
8 390 4.1 009
8 390 1.1 009
8 390 0.1 009
8 390 7.4 009
8 390 6.4 009
8 390 5.4 009
8 390 4.4 009
8 390 1.4 009
8 390 0.4 009
8 390 7.5 009
8 390 6.5 009
8 390 5.5 009
8 390 4.5 009
8 390 1.5 009
8 390 0.5 009
8 390 7.6 009
8 390 6.6 009
8 390 5.6 009
8 390 4.6 009
8 390 1.6 009
8 390 0.6 009
8 390 7.7 009
8 390 6.7 009
8 390 5.7 009
8 390 4.7 009
8 390 1.7 009
8 390 0.7 009
General Electric CMH 20 W Osram HCI-TF 20 W
1 General Electric CMH 35 W Osram HCI-TF 35 W General Electric CMH 20 W Osram HCI-TF 20 W General Electric CMH 35 W
2
Osram HCI-TF 35 W
wide beam
w
w
u s . w
Light source
narrow beam
r t n
wide beam
e.
Lamp
General Electric CMH 20 W
General Electric CMH 35 W
asymmetric beam 3
Osram HCI-TF 20 W
Osram HCI-TF 35 W
8 390 .4. 009
black
8 390 .6. 009
white
8 390 .5. 009
silver grey
NightvisionModular LS Systemleuchten Nightfocus System
27
Downlight module
asymmetric beam
m o c
HIT-TC-CE General Electric CMH 20/35 W,
Nightfocus Modular System
110
Nightfocus LED Modular System With 5 x 1 W high performance LEDs, integral thermal monitoring device, protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, gimbal mounted LED board, adjustment range 0-15°, all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, wall mounting: 2 drilled holes Ø 7 mm, spacing 60 mm, cable entry: up to Ø 13 mm recessed cable, on-board driver and integral transformer
383
130
60 61
7
102
a u .
m o c
. e d
Light source LEDs, replacement modules available
a r nt
1
Light source
narrow beam
Downlight module
Uplight module
5 x LED 1 W warm white
linear beam spread 2 3 wide beam
1
linear beam 5 x LED 1 W neutral white
5 x LED 1 W warm white
8 398 1.1 009
8 398 2.1 009
8 398 3.1 009
8 398 1.2 009
8 398 2.2 009
8 398 3.2 009
5 x LED 1 W warm white
8 398 1.3 009
8 398 2.3 009
8 398 3.3 009
5 x LED 1 W neutral white
8 398 1.4 009
8 398 2.4 009
8 398 3.4 009
5 x LED 1 W warm white
8 398 1.5 009
8 398 2.5 009
8 398 3.5 009
5 x LED 1 W neutral white
8 398 1.6 009
8 398 2.6 009
8 398 3.6 009
5 x LED 1 W neutral white
w
w
8 398 .4. 009
black
8 398 .6. 009
white
8 398 .5. 009
silver grey
28
u s . w
5 x LED 1 W warm white
narrow beam
Nightfocus Modular System
1.2
1.3
2.1
2.2
2.3
3.1
3.2
3.3
Nightfocus Modular System
1.1
a u .
m o c
. e d
spread
a r nt
2
u s . w
5 x LED 1 W neutral white
wide beam
3
5 x LED 1 W warm white
5 x LED 1 W neutral white
8 398 5.1 009
8 398 6.1 009
8 398 5.2 009
8 398 6.2 009
8 398 4.3 009
8 398 5.3 009
8 398 6.3 009
8 398 4.4 009
8 398 5.4 009
8 398 6.4 009
8 398 4.5 009
8 398 5.5 009
8 398 6.5 009
8 398 4.6 009
8 398 5.6 009
8 398 6.6 009
w
8 398 4.1 009
8 398 4.2 009
w
Nightfocus Modular System
29
Accessories for Nightfocus
Accessories for Nightfocus 20/35 W narrow and wide beam Part number
Colour
Description
123 0 301 000
yellow
Dichroic colour filter,
123 0 307 000
blue
internally fitted
123 0 303 000
red
123 0 308 000
green
Part number
Description
123 0 300 000
Prismatic glass lense,
96
70
to widen the beam angle
Part number
Description
123 0 299 940
Radial louvre, to reduce lateral glare
22
70
a u .
Accessories for Nightfocus 20/35 W, narrow beam
70
Part number
Description
123 0 302 000
Ribbed glass spreader lense, internally fitted, for linear beam control,
m o c
continuously adjustable 360째
. e d
a r nt
u s . w
Accessories for Nightfocus 20/35 W, asymmetrical wide beam Colour
123 0 331 000
yellow
123 0 333 000
blue
123 0 337 000
red
w
internally fitted
green
Description Louvre, internally fitted, to reduce lateral glare
8
108 108
123 0 315 940
84
Dichroic colour filter,
w
123 0 338 000 Part number
Description
104
Part number
30
Nightfocus
Nightfocus Installation Examples
Nightfocus is a versatile luminaire range for faรงade illumination. A wide range of lighting design concepts can be accomplished at one level, with few installation points.
Vertical accent lighting with downlights Rotationally symmetrical narrow beam reflectors or narrow beam LEDs
Vertical accent lighting with uplights Rotationally symmetrical narrow beam reflectors or narrow beam LEDs
a u .
m o c
. e d
Uniform illumination of a plinth or area in front of a building Asymmetrical wide beam reflectors
u s . w
a r nt
Vertical accent lighting with up/downlights Modular system with rotationally symmetrical narrow beam reflectors or with narrow beam LEDs up and down
w
w
Vertical accent lighting with uplights/ uniform illumination with downlights Modular system with rotationally symmetrical narrow beam reflectors or narrow beam LEDs upwards and with asymmetrical wide beam reflectors downwards
Illumination of alcoves Luminaires mounted lengthwise with rotationally symmetrical or asymmetrical reflectors or with LEDs
Nightfocus
31
Nightpath Wall recessed and pathway luminaires for metal halide lamps and compact fluorescent lamps
Nightpath is a wall recessed or pathway luminaire for miniature metal halide lamps and compact fluorescent lamps. The reflector system produces an exceptionally wide and uniform light distribution which allows the luminaires to be spaced far apart. The housings are of compact design and offer the advantage of a very shallow recess depth. An impact resistant polycarbonate cover for enhanced protection against vandalism is available as an accessory.
a u .
. e d
a r nt
w
u s . w
w
32
Nightpath
m o c
Design: Roy Fleetwood
For outdoor pathways and steps, the official recommendation is a minimum average illuminance of 1 lux. This can be achieved with Nightpath bollards spaced up to 6 metres apart.
a u .
m o c
. e d
a r nt
6 m – min. 1 lux
u s . w
w
w
The bollard version of Nightpath is built into a robust aluminium profile and can be integrated into any architectural environment thanks to its unostentatious design.
Nightpath
33
Nightpath
177
177
127
Nightpath Wall recessed luminaire For ceramic metal halide lamps (HIT-TC-CE) and compact fluorescent lamps (TC-D/E) protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, shielded light source, wide beam asymmetric high purity aluminium reflector, tempered prismatic safety glass, all exterior steel parts are stainless steel, with stainless steel braces for installation in cavity walls (wall thickness 9-55 mm), cut-out 165 x 165 mm, silicone gasket, closure by 4 stainless steel screws, two cable entries, integral electronic ballast, supplied without lamp
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 300 043 009
black
Philips CDM-Tm
PGJ5
80°
8 300 063 009
white
20 W
8 300 053 009
2.0 kg
HIT-TC-CE 20 W 1600 lm
m o c
silver grey
2,0
3,0 m
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 301 043 009
black
General Electric
GU6,5
80°
8 301 063 009
white
CMH 20 W/
8 301 053 009
silver grey
Osram HCI-TF 20 W
Colour
Lamp
8 302 043 009
black
TC-D/E 10 W
8 302 063 009
white
8 302 053 009
2.0 kg
d a r t n
u s . w
silver grey
Lampholder Weight
Beam angle α
G24q-1
102°
2.0 kg
w
Part number
Colour
8 300 143 009
black
w
8 300 163 009
white
20 W
6m
90 120
8301043 1,0: 0,8 m LPH 2,0 2,0 4,0
2,0 m
2,0 8,0 m
14,0 m
I (cd/klm)
8m
TC-D 10 W 600 lm
90 60
8302043 2,0
4,0
50 30
LPH : 0,8 m 2,0 4,0
2,0
1,0
1,0
100
30
150 200
3,0 m
9,0 m
15,0 m
I (cd/klm)
8m
Lamp
Lampholder Weight
Beam angle α
Philips CDM-Tm
PGJ5
80°
1.9 kg
HIT-TC-CE 20 W 1600 lm
90
silver grey
4,0
2,0
90
60
8300143
4m 4,0
30 30
0,5 m LPH 1,0: 0,8 2,0
60 90
2,0 4,0
120
Colour
Lamp
Lampholder Weight
Beam angle α
8 301 143 009
black
General Electric
GU6,5
80°
8 301 163 009
white
CMH 20 W/
8 301 153 009
silver grey
Osram HCI-TF 20 W
1.9 kg
9,0 m
15,0 m
8m
HIT-TC-CE 20 W 1600 lm 8301143
4m 4,0
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 302 143 009
black
TC-D/E 10 W
G24q-1
102°
8 302 163 009
white
1.9 kg
4,0
2,0
3,0 m
0,5 m LPH 1,0: 0,8 2,0 2,0 4,0
9,0 m
15,0 m
I (cd/klm)
8m
TC-D 10 W 600 lm 8302143
4m
silver grey
4,0
2,0
4,0
2,0
1,0
* For the installation of these luminaires, a polypropylene recess box is required (see page 36).
1,0
90 60
50 30
LPH : 0,8 m 2,0 4,0
150
9,0 m
15,0 m
Description Luminaire for surface mounting, with aluminium housing
132
186
178
Lamps Nightpath
100
200 3,0 m
34
60
HIT-TC-CE 20 W 1600 lm
4,0
4,0
Part number
Part number . ... 2.. 009
30
15,0 m
4m 2m
30
2,0 4,0
9,0 m
3,0 m
8 302 153 009
4,0
90
60
0,5 m LPH 1,0: 0,8 2,0
4m
Nightpath for installation in concrete walls*
8 300 153 009
e.
I (cd/klm) 90
8300043
4m 4,0
Part number
a u .
8m
Nightpath for installation in cavity walls
HIT-TC-CE
HIT-TC-CE
TC-D/E
30
178
131
I (cd/klm) 90
90
60
HIT-TC-CE 20 W 1600 lm
6m
30 4m
30
60
0,5 2m
90
2,0
2,0
1,0
2,0 m
Part number
Colour
Lamp
Lampholder Weight
8 305 640 009
black
Philips CDM-Tm
PGJ5
LPH 1,0: 0,6 m 2,0
8 305 660 009
white
20 W
8 305 650 009
silver grey
Part number
Colour
8 306 640 009
black
1,0
8,0 m
4m 0,5 2m
2,0
2,0
1,0
2,0 m
100
4m
30
2,0
2m
150
1,0
2,0 m
I (cd/klm) 90
60
6m
30 4m
30
60
8,0 m
w 1,0
8,0 m
1,0 4,0
Lamp
Lampholder Weight
Beam angle α
TC-D/E 10 W
G24q-1
102°
8307640
8 307 660 009
white
LPH : 0,6 m 2,0
8 307 650 009
silver grey
8,0 m
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 305 140 009
black
Philips CDM-Tm
PGJ5
80°
LPH 2,0: 1,0 m 4,0
8 305 160 009
white
20 W
8 305 150 009
silver grey
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 306 140 009
black
General Electric
GU6.5
80°
8306140
8 306 160 009
white
CMH 20 W/
LPH 2,0: 1,0 m 4,0
8 306 150 009
silver grey
Osram HCI-TF 20 W
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 307 140 009
black
TC-D/E 10 W
G24q-1
102°
8 307 160 009
white
8 307 150 009
silver grey
Part number
Description
. ... ..1 ...
Luminaire with door and connection box
TC-D 10 W 600 lm
50 4m 4,0
8307140 2,0 m LPH : 1,0 4,0
2,0 4,0 1,0
Nightpath bollard, height 1000 mm 8.7 kg
8.7 kg
14,0 m
6m
2m
6.2 kg
8305140
I (cd/klm)
150
Osram HCI-TF 20 W
4,0
2,0 m
30
CMH 20 W/
14,0 m
2m
100
80°
6.2 kg
black
HIT-TC-CE 20 W 1600 lm
6m
30
Beam angle α
GU6.5
Colour
4,0
2,0 m
60
Lampholder Weight
8 307 640 009
HIT-TC-CE 20 W 1600 lm
4,0
90
80°
Part number
120
4m
silver grey
Beam angle α
14,0 m
2m
90
white
General Electric
6.2 kg
1,0
w
200
ad
r t n
14,0 m
2,0
0,5
90
8 306 650 009
u s . w
50 30
LPH 1,0: 0,6 m 2,0
TC-D 10 W 600 lm
6m
60
8 306 660 009
1,0
8,0 m
I (cd/klm) 90
8306640
e. Lamp
.
m o c
14,0 m
HIT-TC-CE 20 W 1600 lm
6m
ua
Nightpath bollard, height 600 mm
8305640
120
Nightpath Nightvision LS Systemleuchten
L1
Nightpath Bollard For ceramic metal halide lamps (HIT-TC-CE) and compact fluorescent lamps (TC-D/E) protection class I, light head IP65 , IK08 die cast aluminium housing, extruded aluminium post, cast aluminium base plate, polyester powder coated, shielded light source, wide beam asymmetric high purity aluminium reflector, tempered prismatic safety glass, all exterior steel parts are stainless steel, silicone gasket, closure by 4 stainless steel screws, integral electronic ballast, supplied without lamp
2,0
8.7 kg
2,0
200 2,0 m
8,0 m
14,0 m
Lamps HIT-TC-CE
HIT-TC-CE
TC-D/E
Nightvision LS Systemleuchten Nightpath
35
Accessories for Nightpath
Accessories for Nightpath wall recessed luminaries and bollards Colour
Description
123 0 271 000
yellow
Dichroic colour filter,
123 0 273 000
blue
internally fitted
123 0 277 000
red
123 0 278 000
green
Part number
Description
123 0 270 000
Polycarbonate cover,
90
72
Part number
155
for protection against vandalism, for flush mounting in luminaire housing (IK10)
Accessory for Nightpath for installation in concrete walls Part number Description 123 0 252 000 Plastic recess box
202
132
Description
128 0 346 000
Buried extension piece, steel, hot dip galvanised
4 x M6 2 x M8 100
a u .
m o c
. e d
a r nt
u s . w
w
w
Wall recessed luminaires and bollards are generally installed at low level and are therefore particularly prone to vandalism. The impact resistant polycarbonate cover offers additional protection. The cover is mounted on the front of the fitting, flush with the front frame.
36
Nightpath
110 150
Part number
406
Accessory for Nightpath bollards
Ceiling-recessed downlights for metal halide lamps and LEDs
The range of ceiling mount recessed downlights for miniature metal halide lamps and LEDs is characterised by extremely compact dimensions and a high degree of flexibility. The relatively shallow recess depth can be reduced even further by using luminaires with a separate control gear unit. There is a choice of products with fixed or gimbal mounted adjustable optics with various beam angles. The good low-glare characteristics can be optimised by using accessories. All components have a high IP rating.
a u .
m o c
. e d
a r nt
u s . w
w
w
The screwless trim rings are available in 4 standard colours to suit various ceiling surface finishes; black, white, silver and dark brown anodised. Weather-proof closure is possible without the use of a tool.
Ceiling-recessed downlights
37
Ceiling-recessed downlights
Ceiling-recessed downlight Narrow beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, stainless steel assembly ring, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, trim ring with bayonet lock, luminaire fixed using stainless steel braces, clamping range in hollow ceilings 9 - 42 mm, aperture for installation ø 128 mm, M16 cable entry, integral electronic ballast, supplied without lamp
78
126
138
171
234
Recessed downlight 20 W, narrow beam Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle γ
8 310 041 009
black
Philips CDM-Tm
PGJ5
10°
8 310 061 009
white
20 W
8 310 031 009
silver
8 310 011 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle γ
8 312 041 009
black
General Electric
GU6.5
10°
8 312 061 009
white
CMH 20 W/
8 312 031 009
silver
Osram HCI-TF 20 W
8 312 011 009
brown anodised
1.7 kg
a u .
HIT-TC-CE 20 W 1600 lm 8310041
om
1319lx 742lx 475lx 330lx 242lx
Abstand/Distance
u s . w
Recessed downlight 35 W, narrow beam
Lampholder Weight
Beam angle γ
PGJ5
10°
Part number
Trim ring colour
Lamp
8 311 041 009
black
Philips CDM-Tm
8 311 061 009
white
35 W
8 311 031 009
silver
8 311 011 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle γ
8 313 041 009
black
General Electric
GU6.5
10°
8 313 061 009
white
8 313 031 009
silver
8 313 011 009
brown anodised
w
w
CMH 35 W/
c . e
d a r t n
1.7 kg
1.7 kg
90 60
Ø 0,77 m Ø 0,62 m Ø 0,46 m
1.7 kg
I (cd/klm)
Ø 1,08 m
Ø 0,92 m
3m
4m
5m
HIT-TC-CE 20 W 1600 lm 8312041
6m
5000
30
7500 10000
7m
Ø 1,08 m Ø 0,92 m
Ø 0,77 m Ø 0,62 m Ø 0,46 m
1319lx 742lx 475lx 330lx 242lx Abstand/Distance
3m
4m
5m
7m
I (cd/klm)
HIT-TC-CE 35 W 3200 lm 8311041
6m
Ø 1,23 m
60
Ø 0,92 m 5000
Ø 0,77 m Ø 0,62 m
4m
30
7500
1484lx 950lx 660lx 485lx 371lx Abstand/Distance
90
Ø 1,08 m
5m
6m
HIT-TC-CE 35 W 3200 lm 8313041
7m
10000
8m
Ø 1,23 m Ø 1,08 m Ø 0,92 m
Ø 0,77 m
Osram HCI-TF 35 W
Ø 0,62 m
1484lx 950lx 660lx 485lx 371lx Abstand/Distance
4m
5m
6m
7m
8m
Recessed downlight without control gear* Part number Lamp Philips CDM-Tm 20/35 W General Electric CMH 20/35 W/
. ... 1.. ...
Osram HCI-TF 20/35 W
120
* Luminaire supplied with 0.5 m cable. Remote control gear unit required.
138
Accessories for recessed downlights without control gear,
204
Lamp
113 0 022 009
Philips CDM-Tm 20 W
113 0 023 009
Philips CDM-Tm 35 W
113 0 024 009
General Electric CMH 20 W/Osram HCI-TF 20 W
113 0 025 009
General Electric CMH 35 W/Osram HCI-TF 35 W
51
Part number
78
polycarbonate gear box
Lamps 38
Ceiling-recessed downlights
HIT-TC-CE
HIT-TC-CE
Ceiling-recessed downlights Nightvision LS Systemleuchten
Ceiling-recessed downlight Medium wide beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, stainless steel assembly ring, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, trim ring with bayonet lock, luminaire fixed using stainless steel braces, clamping range in hollow ceilings 9 - 42 mm, aperture for installation ø 128 mm, M16 cable entry, integral electronic ballast, supplied without lamp
78
126
138
163
234
I (cd/klm) 90
HIT-TC-CE 20 W 1600 lm 8310042
60
Ø 1,80 m Ø 1,44 m
30
2000
Ø 2,52 m Ø 2,16 m
Ø 1,08 m
3000
379lx 213lx 136lx Abstand/Distance
3m
4m
5m
HIT-TC-CE 20 W 1600 lm
95lx 6m
70lx 7m
Ø 2,52 m Ø 2,16 m
8312042
379lx 213lx 136lx Abstand/Distance
I (cd/klm) 90
3m
5m
95lx 6m
70lx
Ø 2,88 m
Ø 2,16 m
Ø 1,44 m
3000
426lx 273lx 189lx 139lx 107lx
w
Abstand/Distance
4m
5m
w
6m
HIT-TC-CE 35 W 3200 lm
7m
8m
Ø 2,88 m Ø 2,52 m
8313042
Ø 2,16 m Ø 1,80 m
Ø 1,44 m
426lx 273lx 189lx 139lx 107lx Abstand/Distance
4m
5m
Lampholder Weight
Philips CDM-Tm
PGJ5
8 310 062 009
white
20 W
8 310 032 009
silver
8 310 011 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 312 042 009
black
General Electric
GU6.5
20°
6m
7m
white silver
.
m o c
e.
ad
r t n
8 312 011 009
7m
Ø 2,52 m
Ø 1,80 m
30
Lamp
black
u s . w
HIT-TC-CE 35 W 3200 lm 8311042
60 2000
4m
Trim ring colour
8 310 042 009
8 312 032 009
Ø 1,08 m
Beam angle α
Part number
8 312 062 009
Ø 1,80 m Ø 1,44 m
ua
Recessed downlight 20 W, medium wide beam
1.7 kg
1.7 kg
20°
CMH 20 W/
Osram HCI-TF 20 W
brown anodised
Recessed downlight 35 W, medium wide beam Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 311 042 009
black
Philips CDM-Tm
PGJ5
20°
8 311 062 009
white
35 W
8 311 032 009
silver
8 310 011 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 313 042 009
black
General Electric
GU6.5
20°
8 313 062 009
white
CMH 35 W/
8 313 032 009
silver
Osram HCI-TF 35 W
8 313 012 009
brown anodised
1.7 kg
1.7 kg
8m
Recessed downlight without control gear* Part number Lamp Philips CDM-Tm 20/35 W . ... 1.. ...
General Electric CMH 20/35 W/ Osram HCI-TF 20/35 W
120
* Luminaire supplied with 0.5 m cable. Remote control gear unit required.
138
Accessories for recessed downlights without control gear,
51
78
204
polycarbonate gear box Part number
Lamp
113 0 022 009
Philips CDM-Tm 20 W
113 0 023 009
Philips CDM-Tm 35 W
113 0 024 009
General Electric CMH 20 W/Osram HCI-TF 20 W
113 0 025 009
General Electric CMH 35 W/Osram HCI-TF 35 W
Lamps HIT-TC-CE
HIT-TC-CE
Ceiling-recessed downlights
39
Ceiling-recessed downlights
Ceiling-recessed downlight Wide beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, stainless steel assembly ring, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, trim ring with bayonet lock, luminaire fixed using stainless steel braces, clamping range in hollow ceilings 9-42 mm, aperture for installation ø 128 mm, M16 cable entry, integral electronic ballast, supplied without lamp
78
126
138
163
234
Recessed downlight 20 W, wide beam Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 310 043 009
black
Philips CDM-Tm
PGJ5
35°
8 310 063 009
white
20 W
8 310 033 009
silver
8 310 013 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 312 043 009
black
General Electric
GU6.5
35°
8 312 063 009
white
CMH 20 W/
8 312 033 009
silver
Osram HCI-TF 20 W
8 312 013 009
brown anodised
1.7 kg
Ø 4,44 m
Ø 3,81 m
8310043
Ø 3,17 m Ø 2,54 m Ø 1,90 m
m o c 153lx
Abstand/Distance
1.7 kg
Lampholder Weight
Beam angle α
PGJ5
35°
Part number
Trim ring colour
Lamp
8 311 043 009
black
Philips CDM-Tm
8 311 063 009
white
35 W
8 311 033 009
silver
8 311 013 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 313 043 009
black
General Electric
GU6.5
35°
8 313 063 009
white
8 313 033 009
silver
8 313 013 009
brown anodised
w
CMH 35 W/
e.
d a r t n
u s . w
Recessed downlight 35 W, wide beam
w
a u .
HIT-TC-CE 20 W 1600 lm
1.7 kg
1.7 kg
86lx
3m
4m
55lx
5m
HIT-TC-CE 20 W 1600 lm 8312043
38lx
6m
I (cd/klm) 90
90
60
250 30
500
60 30
750
28lx
1000
7m
Ø 4,44 m Ø 3,81 m
Ø 3,17 m
Ø 2,54 m Ø 1,90 m
153lx Abstand/Distance
86lx
3m
4m
55lx 5m
28lx 7m
I (cd/klm)
HIT-TC-CE 35 W 3200 lm 8311043
38lx 6m
Ø 5,08 m Ø 4,44 m Ø 3,81 m
250 30
Ø 3,17 m
500
60 30
750
172lx 110lx 4m
90
60
Ø 2,54 m
Abstand/Distance
90
5m
76lx 6m
HIT-TC-CE 35 W 3200 lm 8313043
56lx 7m
43lx
1000
8m
Ø 5,08 m Ø 4,44 m Ø 3,81 m
Ø 3,17 m
Osram HCI-TF 35 W
Ø 2,54 m
172lx 110lx Abstand/Distance
4m
5m
76lx 6m
56lx 7m
43lx 8m
Recessed downlight without control gear* Part number Lamp Philips CDM-Tm 20/35 W General Electric CMH 20/35 W/
. ... 1.. ...
Osram HCI-TF 20/35 W
120
* Luminaire supplied with 0.5 m cable. Remote control gear unit required.
138
Accessories for recessed downlights without control gear,
204
Lamp
113 0 022 009
Philips CDM-Tm 20 W
113 0 023 009
Philips CDM-Tm 35 W
113 0 024 009
General Electric CMH 20 W/Osram HCI-TF 20 W
113 0 025 009
General Electric CMH 35 W/Osram HCI-TF 35 W
51
Part number
78
polycarbonate gear box
Lamps 40
Ceiling-recessed downlights
HIT-TC-CE
HIT-TC-CE
I (cd/klm) 90
HIT-TC-CE 20 W 1600 lm 8310046
60
Ø 0,63 m Ø 0,50 m
30
8000
Ø 0,88 m Ø 0,76 m
Ø 0,38 m
12000
1895lx 1066lx 682lx 474lx 348lx Abstand/Distance
3m
4m
5m
HIT-TC-CE 20 W 1600 lm
6m
7m
Ø 0,88 m Ø 0,76 m
8312046
1895lx 1066lx 682lx 474lx 348lx Abstand/Distance
I (cd/klm) 90
3m
5m
6m
Ø 1,01 m
Ø 0,76 m Ø 0,63 m
30
Ø 0,50 m
12000
2131lx 1364lx 947lx 696lx 533lx
w
Abstand/Distance
4m
5m
w
6m
HIT-TC-CE 35 W 3200 lm
7m
8m
Ø 1,01 m Ø 0,88 m
8313046
Ø 0,76 m Ø 0,63 m
Ø 0,50 m
15°
2131lx 1364lx 947lx 696lx 533lx Abstand/Distance
4m
5m
6m
7m
126
78 171
Beam angle α
Part number
Trim ring colour
Lamp
Lampholder Weight
8 310 046 009
black
Philips CDM-Tm
PGJ5
8 310 066 009
white
20 W
8 310 036 009
silver
8 310 016 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 312 046 009
black
General Electric
GU6.5
7°
white silver
.
m o c
e.
ad
r t n
8 312 016 009
7m
Ø 0,88 m
ua
Recessed downlight 20 W, gimbal mounted, narrow beam
u s . w
HIT-TC-CE 35 W 3200 lm 8311046
60 8000
4m
234
8 312 036 009
Ø 0,38 m
15°
138
8 312 066 009
Ø 0,63 m Ø 0,50 m
Ceiling-recessed downlights Nightvision LS Systemleuchten
Ceiling-recessed downlight Gimbal mounted reflector narrow beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, stainless steel assembly ring, polyester powder coated, gimbal mounted rotationally symmetrical aluminium reflector, tilt range 0-15°, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, trim ring with bayonet lock, luminaire fixed using stainless steel braces, clamping range in hollow ceilings 9-42 mm, aperture for installation ø 128 mm, M16 cable entry, integral electronic ballast, supplied without lamp
1.7 kg
1.7 kg
7°
CMH 20 W/
Osram HCI-TF 20 W
brown anodised
Recessed downlight 35 W, gimbal mounted, narrow beam Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 311 046 009
black
Philips CDM-Tm
PGJ5
9°
8 311 066 009
white
35 W
8 311 036 009
silver
8 311 016 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 313 046 009
black
General Electric
GU6.5
9°
8 313 066 009
white
CMH 35 W/
8 313 036 009
silver
Osram HCI-TF 35 W
8 313 016 009
brown anodised
1.7 kg
1.7 kg
8m
Recessed downlight without control gear* Part number Lamp Philips CDM-Tm 20/35 W . ... 1.. ...
General Electric CMH 20/35 W/ Osram HCI-TF 20/35 W
120
* Luminaire supplied with 0.5 m cable. Remote control gear unit required.
138
Accessories for recessed downlights without control gear,
51
78
204
polycarbonate gear box Part number
Lamp
113 0 022 009
Philips CDM-Tm 20 W
113 0 023 009
Philips CDM-Tm 35 W
113 0 024 009
General Electric CMH 20 W/Osram HCI-TF 20 W
113 0 025 009
General Electric CMH 35 W/Osram HCI-TF 35 W
Lamps HIT-TC-CE
HIT-TC-CE
Nightvision LS Systemleuchten Ceiling-recessed downlights
41
Ceiling-recessed downlights
Ceiling-recessed downlight Gimbal mounted reflector medium wide beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, stainless steel assembly ring, polyester powder coated, gimbal mounted rotationally symmetrical aluminium reflector, tilt range 0-15°, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, trim ring with bayonet lock, luminaire fixed using stainless steel braces, clamping range in hollow ceilings 9-42 mm, aperture for installation ø 128 mm, M16 cable entry, integral electronic ballast, supplied without lamp
78
126
138
163
234
Recessed downlight 20 W, gimbal mounted, medium wide beam Part number
Trim ring colour
Lamp
Lampholder Weight PGJ5
8 310 047 009
black
Philips CDM-Tm
8 310 067 009
white
20 W
8 310 037 009
silver
8 310 017 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 312 047 009
black
General Electric
GU6.5
18°
8 312 067 009
white
CMH 20 W/
8 312 037 009
silver
Osram HCI-TF 20 W
8 312 017 009
brown anodised
Trim ring colour
18°
8310047
a u .
om
493lx 277lx 178lx 123lx
Abstand/Distance
u s . w
Lamp
Lampholder Weight
black
Philips CDM-Tm
8 311 067 009
white
35 W
8 311 037 009
silver
8 311 017 009
brown anodised
Part number
Trim ring colour
Lamp
Lampholder Weight
Beam angle α
8 313 047 009
black
General Electric
GU6.5
18°
8 313 067 009
white
8 313 037 009
silver
8 313 017 009
brown anodised
w
CMH 35 W/
1.7 kg
Beam angle α
8 311 047 009
w
PGJ5
c . e
d a r t n
1.7 kg
18°
90 60
Ø 1,55 m Ø 1,24 m
1.7 kg
I (cd/klm)
Ø 2,17 m
Ø 1,86 m
Ø 0,93 m
Recessed downlight 35 W, gimbal mounted, medium wide beam Part number
1.7 kg
HIT-TC-CE 20 W 1600 lm
Beam angle α
3m
4m
5m
HIT-TC-CE 20 W 1600 lm 8312047
6m
3000
Ø 2,17 m Ø 1,86 m
Ø 1,55 m Ø 1,24 m Ø 0,93 m
15°
3m
4m
5m
8311047
6m
91lx 7m
I (cd/klm)
HIT-TC-CE 35 W 3200 lm
Ø 2,48 m
90
Ø 2,17 m 60
Ø 1,86 m Ø 1,55 m
2000
Ø 1,24 m
555lx 355lx 247lx 181lx 139lx Abstand/Distance
30
7m
493lx 277lx 178lx 123lx Abstand/Distance
91lx
2000
4m
5m
6m
HIT-TC-CE 35 W 3200 lm 8313047
7m
30
3000
8m
Ø 2,48 m Ø 2,17 m Ø 1,86 m
Ø 1,55 m
Osram HCI-TF 35 W
Ø 1,24 m
15°
555lx 355lx 247lx 181lx 139lx Abstand/Distance
4m
5m
6m
7m
8m
Recessed downlight without control gear* Part number Lamp Philips CDM-Tm 20/35 W General Electric CMH 20/35 W/
. ... 1.. ...
Osram HCI-TF 20/35 W
120
* Luminaire supplied with 0.5 m cable. Remote control gear unit required.
138
Accessories for recessed downlights without control gear,
204
Lamp
113 0 022 009
Philips CDM-Tm 20 W
113 0 023 009
Philips CDM-Tm 35 W
113 0 024 009
General Electric CMH 20 W/Osram HCI-TF 20 W
113 0 025 009
General Electric CMH 35 W/Osram HCI-TF 35 W
51
Part number
78
polycarbonate gear box
Lamps 42
Ceiling-recessed downlights
HIT-TC-CE
HIT-TC-CE
Ceiling-recessed downlights Nightvision LS Systemleuchten
Ceiling-recessed LED downlight Gimbal mounted With 5 x 1 W high performance LEDs, integral thermal monitoring system, protection class I, IP65 , IK08 die cast aluminium housing, stainless steel assembly ring, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, trim ring with bayonet lock, luminaire fixed using stainless steel braces, clamping range in hollow ceilings 9-42 mm, aperture for installation ø 128 mm, M16 cable entry, integral transformer and on-board driver
78
126
138
171
234
I (cd/klm) 90 60 6000
LED 439 lm
8315046019
Ø 1,22 m
30
Ø 0,81 m Ø 0,41 m
9000
996lx 249lx 111lx
12000 Abstand/Distance
2m
4m
62lx
6m
LED 439 lm
8m
40lx 10 m
Ø 2,03 m Ø 1,63 m
8315045019
Ø 0,41 m
996lx 249lx 111lx Abstand/Distance
Abstand/Distance
0,6 m
w 94lx
2m
4m
w
LED 439 lm
42lx
I (cd/klm) 90
90
60
60 30
800
10 m
94lx
2m
42lx
4m
23lx
6m
15lx
8m
10 m
Ø 5,92 m Ø 4,74 m
8315046059
Ø 3,55 m Ø 2,37 m Ø 1,18 m
1200
149lx
1600 Abstand/Distance
37lx
2m
4m
17lx 6m
LED 439 lm
9lx 8m
6lx 10 m
Ø 5,92 m Ø 4,74 m
8315045059
Ø 3,55 m Ø 2,37 m Ø 1,18 m
15°
149lx Abstand/Distance
2m
1,8 m
12 m
10,7 m
LED 439 lm
30
10lx
8,9 m
0,9 m
0,6 m
0,3 m
375lx
8m
5,3 m
3,6 m
Abstand/Distance
6m
15lx
7,1 m
8315045029
1,8 m
23lx
37lx 4m
17lx 6m
9lx 8m
6lx
1,8 m
375lx
0,3 m
1,8 m
4000
0,9 m
3,6 m
1,5 m
5,3 m
Lamp
Weight
Beam angle γ
5 x LED 1 W neutral white
1.9 kg
11°
5 x LED 1 W warm white
8 315 066 019
white
8 315 036 019
silver
8 315 016 019
brown anodised
Part number
Trim ring colour
8 315 045 019
black
8 315 065 019
white
8 315 035 019
silver
8 315 015 019
brown anodised
u s . w
7,1 m
8315046029
11°
Lamp
black
.
m o c
e.
Recessed LED downlight, linear beam spread
8,9 m
2000
Beam angle γ
1.9 kg
Trim ring colour
8 315 046 019
10 m
10,7 m
LED 439 lm
3000
8m
40lx
1,5 m
60
6m
1,2 m
90
4m
1,2 m
I (cd/klm)
2m
62lx
Weight
Part number
d a r t n
Ø 1,22 m Ø 0,81 m
15°
ua
Recessed LED downlight, narrow beam
Ø 2,03 m Ø 1,63 m
10lx
Part number
Trim ring colour
Lamp
Weight
Beam angle γ
8 315 046 029
black
5 x LED 1 W warm white
1.9 kg
C 0 – 180
C 90 – 270
8 315 066 029
white
9°
48°
8 315 036 029
silver
8 315 016 029
brown anodised
Part number
Trim ring colour
Lamp
Weight
Beam angle γ
8 315 045 029
black
5 x LED 1 W neutral white
1.9 kg
C 0 – 180
C 90 – 270
8 315 065 029
white
9°
48°
8 315 035 029
silver
8 315 015 029
brown anodised
12 m
Recessed LED downlight, wide beam Part number
Trim ring colour
Lamp
Weight
Beam angle γ
8 315 046 059
black
5 x LED 1 W warm white
1.9 kg
33°
8 315 066 059
white
8 315 036 059
silver
8 315 016 059
brown anodised
Part number
Trim ring colour
Lamp
Weight
Beam angle γ
8 315 045 059
black
5 x LED 1 W neutral white
1.9 kg
33°
8 315 065 059
white
8 315 035 059
silver
8 315 015 059
brown anodised
10 m
120
Recessed LED downlight without control gear* Part number Description Luminaire without converter, for connection to 24 V DC power supply
138
Lamps LEDs, replacement modules available
. ... 1.. ...
* Luminaire with 0.5 m cable. External power supply 24 V DC required. Nightvision LS Systemleuchten Ceiling-recessed downlights
43
Accessories for ceiling-recessed downlights
Accessories for recessed downlights 20/35 W narrow, medium wide and wide beam Part number
Colour
Description
123 0 311 000
yellow
Dichroic colour filters,
123 0 313 000
blue
internally fitted
123 0 317 000
red
123 0 318 000
green
Part number
Description
123 0 320 940
Radial louvre,
96
internally fitted, to reduce lateral glare
19
96
Acessories for recessed downlights 20/35 W, narrow beam Part number
Description
123 0 312 000
Ribbed glass spreader lense, internally fitted, for linear beam control, continuously adjustable 360째
96
a u .
Description
113 0 026 009
Power supply
. e d
a r nt
with LED converter
w
u s . w
w
44
Ceiling-recessed downlights
204 78
Part number
51
m o c
Accessories for LED downlights
Accessories for ceiling-recessed downlights
Accessories for recessed downlights, gimbal mounted, narrow and wide beam
96
70
Part number
Colour
Description
123 0 301 000
yellow
Dichroic colour filters,
123 0 303 000
blue
internally fitted
123 0 307 000
red
123 0 308 000
green
Part number
Description
123 0 300 000
Prismatic glass lense, to widen the beam angle
22
Part number
Description
123 0 299 940
Radial louvre, to widen the beam angle
70
a u .
Accessories for recessed downlights, 70
gimbal mounted, narrow beam Part number
Description
123 0 302 000
Ribbed glass spreader lense,
m o c
internally fitted, for linear beam control
. e d
a r nt
u s . w 290
Accessory for ceiling-recessed downlights
470
with control gear
Description
123 0 289 000
Recess box,
300
200
200
w
w
Part number
polyamide, for concrete ceilings
Accessory for ceiling-recessed downlights without control gear Part number
Description
123 0 290 000
Recess box, polyamide, for concrete ceilings
Ceiling-recessed downlights
45
Surface-mounted downlights for metal halide lamps and LEDs
The new series of surface-mounted downlights for miniature metal halide lamps and LEDs are compact in size and very shallow. Equipped with either fixed or gimbal mounted adjustable reflectors and with a range of different distributions, these products can be adapted to suit a wide range of lighting applications.The control gear is situated in a separate compartment for optimal thermal protection. In the case of the LED product with fixed optics, this compartment is not required, resulting in an extremely shallow housing. The range of accessories includes optical lenses for beam control and anti-glare louvres.
a u .
m o c
. e d
a r nt
u s . w
w
w
IP rated ceiling-mounted luminaires can be installed under-canopy to provide a sophisticated lighting effect for entrances.
46
Surface-mounted downlights
Surface-mounted downlights Nightvision LS Systemleuchten
84
149
183
Surface-mounted downlight Narrow beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, housing locked with a grub screw, ceiling mount: 3 drilled holes ø 5 mm on circular pitch ø 84 mm, cable entry ø 7-10 mm recessed or surface mounted cable, integral electronic ballast, supplied without lamp
3x
I (cd/klm) 90 60 5000
HIT-TC-CE 20 W 1600 lm 8316041
Ø 1,08 m Ø 0,92 m Ø 0,77 m
30
Ø 0,62 m Ø 0,46 m
7500
1319lx 742lx 475lx 330lx 242lx
10000 Abstand/Distance
3m
4m
5m
HIT-TC-CE 20 W 1600 lm 8318041
6m
Part number
Colour
Lamp
Lampholder Weight
8 316 041 009
black
Philips CDM-Tm 20 W
PGJ5
8 316 061 009
white
8 316 051 009
silver grey
Part number
Colour
Ø 1,08 m
8 318 041 009
black
8 318 051 009
Ø 0,46 m
r t n
1319lx 742lx 475lx 330lx 242lx Abstand/Distance
I (cd/klm) 90 60 5000
3m
4m
5m
8317041
7m
Ø 1,23 m
Ø 1,08 m
Ø 0,92 m
30
Ø 0,77 m Ø 0,62 m
7500
6m
u s . w
HIT-TC-CE 35 W 3200 lm
1484lx 950lx 660lx 485lx 371lx
10000 Abstand/Distance
w
4m
5m
w
6m
HIT-TC-CE 35 W 3200 lm 8319041
ad
8 318 061 009
Ø 0,77 m Ø 0,62 m
7m
e.
white
silver grey
Lamp
.
m o c
7m
Ø 0,92 m
ua
Surface-mounted downlight 20 W, narrow beam
General Electric
2.1 kg
Beam angle α 10°
Lampholder Weight
Beam angle α
GU6.5
10°
2.1 kg
5
CMH 20 W /
Osram HCI-TF 20 W
Surface-mounted downlight 35 W, narrow beam Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 317 041 009
black
Philips CDM-Tm 35 W
PGJ5
10°
8 317 061 009
white
8 317 051 009
silver grey
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 319 041 009
black
General Electric
GU6.5
10°
8 319 061 009
white
CMH 35 W /
8 319 051 009
silver grey
Osram HCI-TF 35 W
2.1 kg
8m
Ø 1,23 m Ø 1,08 m
Ø 0,92 m Ø 0,77 m
Ø 0,62 m
2.1 kg
1484lx 950lx 660lx 485lx 371lx Abstand/Distance
4m
5m
6m
7m
8m
Lamps HIT-TC-CE
HIT-TC-CE
Nightvision LS Systemleuchten Surface-mounted downlights
47
84
149
183
Surface-mounted downlights
Surface-mounted downlight Medium wide beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, housing locked with a grub screw, ceiling mount: 3 drilled holes ø 5 mm on circular pitch ø 84 mm, cable entry ø 7-10 mm recessed or surface mounted cable, integral electronic ballast, supplied without lamp
3x
5
Surface-mounted downlight 20 W, medium wide beam Part number
Colour
8 316 042 009
black
8 316 062 009
white
8 316 052 009
silver grey
Lamp
Lampholder Weight
Philips CDM-Tm 20 W
PGJ5
2.1 kg
20°
8316042
om
379lx 213lx 136lx
Colour
Lamp
Lampholder Weight
Beam angle α
8 318 042 009
black
General Electric
GU6.5
20°
8 318 062 009
white
CMH 20 W /
8 318 052 009
silver grey
Osram HCI-TF 20 W
8 317 042 009
black
8 317 062 009
white
8 317 052 009
silver grey
Part number
Colour
8 319 042 009
black
8 319 062 009
white
8 319 052 009
silver grey
Lamp
Lampholder Weight
Philips CDM-Tm 35 W
w
w Lamp
General Electric CMH 35 W /
PGJ5
c . e
d a r t n
u s . w
Surface-mounted downlight 35 W, medium wide beam Colour
2.1 kg
2.1 kg
Beam angle α 20°
4m
5m
HIT-TC-CE 20 W 1600 lm 8318042
70lx
20°
Ø 2,52 m
Ø 1,80 m Ø 1,44 m
3m
4m
8317042
5m
95lx 6m
70lx 7m
I (cd/klm) Ø 2,88 m
60
Ø 2,16 m
4m
5m
8319042
2000
6m
7m
8m
Ø 2,88 m Ø 2,52 m Ø 2,16 m
Ø 1,80 m Ø 1,44 m
426lx 273lx 189lx 139lx 107lx Abstand/Distance
4m
5m
6m
7m
Lamps 48
Surface-mounted downlights
HIT-TC-CE
90
Ø 2,52 m
HIT-TC-CE 35 W 3200 lm
Osram HCI-TF 35 W
3000
7m
426lx 273lx 189lx 139lx 107lx
Beam angle α
30
Ø 1,08 m
HIT-TC-CE 35 W 3200 lm
Abstand/Distance
2000
Ø 2,16 m
379lx 213lx 136lx Abstand/Distance
95lx
6m
Ø 1,80 m
GU6.5
2.1 kg
3m
Ø 1,44 m
Lampholder Weight
90 60
Ø 1,80 m Ø 1,44 m
Part number
I (cd/klm)
Ø 2,52 m
Ø 2,16 m
Ø 1,08 m
Abstand/Distance
Part number
a u .
HIT-TC-CE 20 W 1600 lm
Beam angle α
HIT-TC-CE
8m
3000
30
Surface-mounted downlights Nightvision LS Systemleuchten
84
149
183
Surface-mounted downlight Wide beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, housing locked with a grub screw, ceiling mount: 3 drilled holes ø 5 mm on circular pitch ø 84 mm, cable entry ø 7-10 mm recessed or surface mounted cable, integral electronic ballast, supplied without lamp
3x
I (cd/klm) 90
90
60
250 30
500
60
HIT-TC-CE 20 W 1600 lm
Ø 4,44 m Ø 3,81 m
8316043
Ø 3,17 m
30
Ø 2,54 m
750
Ø 1,90 m
1000
153lx Abstand/Distance
86lx
3m
4m
55lx 5m
HIT-TC-CE 20 W 1600 lm
38lx 6m
28lx
Ø 4,44 m
8318043
Abstand/Distance
I (cd/klm) 90
90
60
250 30
500
60
3m
4m
55lx 5m
172lx 110lx Abstand/Distance
6m
76lx
w
4m
5m
w
6m
HIT-TC-CE 35 W 3200 lm 8319043
56lx
7m
43lx
Ø 5,08 m
Ø 3,81 m Ø 3,17 m
Ø 2,54 m
Abstand/Distance
4m
5m
white
8 316 053 009
silver grey
Part number
Colour
8 318 043 009
black
76lx 6m
56lx 7m
m o c
ad
e.
r t n
white
silver grey
Lamp
.
General Electric
2.1 kg
Beam angle α 35°
Lampholder Weight
Beam angle α
GU6.5
35°
2.1 kg
CMH 20 W /
Osram HCI-TF 20 W
Surface-mounted downlight 35 W, wide beam Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 317 043 009
black
Philips CDM-Tm 35 W
PGJ5
35°
8 317 063 009
white
8 317 053 009
silver grey
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 319 043 009
black
General Electric
GU6.5
35°
8 319 063 009
white
CMH 35 W /
8 319 053 009
silver grey
Osram HCI-TF 35 W
2.1 kg
8m
Ø 4,44 m
172lx 110lx
8 316 063 009
7m
Ø 5,08 m
Ø 2,54 m
750
PGJ5
28lx
Ø 4,44 m
Ø 3,17 m
1000
38lx
Ø 3,81 m
30
Lampholder Weight
Philips CDM-Tm 20 W
u s . w
HIT-TC-CE 35 W 3200 lm 8317043
Lamp
black
8 318 053 009
Ø 1,90 m
86lx
Colour
8 316 043 009
8 318 063 009
Ø 3,17 m Ø 2,54 m
153lx
Part number
7m
Ø 3,81 m
ua
Surface-mounted downlight 20 W, wide beam
5
2.1 kg
43lx 8m
Lamps HIT-TC-CE
HIT-TC-CE
Nightvision LS Systemleuchten Surface-mounted downlights
49
84
149
183
Surface-mounted downlights
Surface-mounted downlight Gimbal mounted reflector narrow beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, gimbal mounted rotationally symmetrical aluminium reflector, adjustment range 0-15°, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, housing locked with a grub screw, ceiling mount: 3 drilled holes ø 5 mm on circular pitch ø 84 mm, cable entry ø 7-10 mm recessed or surface mounted cable, integral electronic ballast, supplied without lamp 3x
5
Surface-mounted downlight 20 W, gimbal mounted, narrow beam Part number
Colour
8 316 141 009
black
8 316 161 009
white
8 316 151 009
silver grey
Lamp
Lampholder Weight
Philips CDM-Tm 20 W
PGJ5
2.1 kg
7°
8316141
om
1895lx 1066lx 682lx 474lx 348lx
Colour
Lamp
Lampholder Weight
Beam angle α
8 318 141 009
black
General Electric
GU6.5
7°
8 318 161 009
white
CMH 20 W /
8 318 151 009
silver grey
Osram HCI-TF 20 W
2.1 kg
u s . w
Surface-mounted downlight 35 W, gimbal mounted, narrow beam Colour
8 317 141 009
black
8 317 161 009
white
8 317 151 009
silver grey
Part number
Colour
8 319 141 009
black
8 319 161 009
white
8 319 151 009
silver grey
Lamp
Lampholder Weight
Philips CDM-Tm 35 W
w
w Lamp
General Electric CMH 35 W /
PGJ5
c . e
d a r t n
2.1 kg
Beam angle α 9°
4m
5m
HIT-TC-CE 20 W 1600 lm 8318141
6m
Ø 0,88 m Ø 0,76 m
Ø 0,63 m Ø 0,50 m Ø 0,38 m
3m
4m
5m
Ø 1,01 m
60
Ø 0,76 m
4m
5m
8319141
8000
6m
7m
30
12000
8m
Ø 1,01 m Ø 0,88 m Ø 0,76 m
Ø 0,63 m
Osram HCI-TF 35 W
Ø 0,50 m
2131lx 1364lx 947lx 696lx 533lx 4m
5m
6m
7m
Lamps Surface-mounted downlights
90
Ø 0,88 m
HIT-TC-CE 35 W 3200 lm
Abstand/Distance
50
15°
7m
I (cd/klm)
HIT-TC-CE 35 W 3200 lm 8317141
6m
2131lx 1364lx 947lx 696lx 533lx
9°
30
12000
1895lx 1066lx 682lx 474lx 348lx Abstand/Distance
Abstand/Distance
Beam angle α
8000
7m
Ø 0,63 m
GU6.5
2.1 kg
3m
Ø 0,50 m
Lampholder Weight
90 60
Ø 0,63 m Ø 0,50 m
Part number
I (cd/klm)
Ø 0,88 m
Ø 0,76 m
Ø 0,38 m
Abstand/Distance
Part number
a u .
HIT-TC-CE 20 W 1600 lm
Beam angle α
HIT-TC-CE
HIT-TC-CE
8m
15°
Surface-mounted downlights Nightvision LS Systemleuchten
84
149
183
Surface-mounted downlight Gimbal mounted reflector medium wide beam For ceramic metal halide lamps (HIT-TC-CE), protection class I, IP65 , IK08 die cast aluminium housing, polyester powder coated, gimbal mounted rotationally symmetrical aluminium reflector, adjustment range 0-15°, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, housing locked with a grub screw, ceiling mount: 3 drilled holes ø 5 mm on circular pitch ø 84 mm, cable entry ø 7-10 mm recessed or surface mounted cable, integral electronic ballast, supplied without lamp
3x
I (cd/klm) 90 60 2000
HIT-TC-CE 20 W 1600 lm 8316142
Ø 2,17 m Ø 1,86 m Ø 1,55 m
Ø 1,24 m
30
Ø 0,93 m
3000
493lx 277lx 178lx 123lx Abstand/Distance
3m
4m
5m
HIT-TC-CE 20 W 1600 lm 8318142
6m
91lx
Ø 2,17 m
493lx 277lx 178lx 123lx
I (cd/klm) 90 60 2000
3m
4m
5m
6m
Ø 1,86 m
555lx 355lx 247lx 181lx 139lx Abstand/Distance
w
4m
5m
w
6m
HIT-TC-CE 35 W 3200 lm 8319142
7m
8 316 162 009
white
8 316 152 009
silver grey
Part number
Colour
8 318 142 009
black
m o c
ad
e.
r t n
white
silver grey
Lamp
.
General Electric
2.1 kg
Beam angle α 18°
Lampholder Weight
Beam angle α
GU6.5
18°
2.1 kg
CMH 20 W /
Osram HCI-TF 20 W
Surface-mounted downlight 35 W, gimbal mounted, medium wide beam Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 317 142 009
black
Philips CDM-Tm 35 W
PGJ5
18°
8 317 162 009
white
8 317 152 009
silver grey
Part number
Colour
Lamp
Lampholder Weight
Beam angle α
8 319 142 009
black
General Electric
GU6.5
18°
8 319 162 009
white
CMH 35 W /
8 319 152 009
silver grey
Osram HCI-TF 35 W
2.1 kg
8m
Ø 2,48 m Ø 2,17 m
Ø 1,86 m Ø 1,55 m
Ø 1,24 m
15°
PGJ5
7m
Ø 2,48 m
Ø 1,24 m
3000
Lampholder Weight
Philips CDM-Tm 20 W
91lx
Ø 2,17 m
Ø 1,55 m
30
Lamp
black
u s . w
HIT-TC-CE 35 W 3200 lm 8317142
Colour
8 316 142 009
8 318 152 009
Ø 0,93 m
Abstand/Distance
Part number
8 318 162 009
Ø 1,55 m Ø 1,24 m
15°
Surface-mounted downlight 20 W, gimbal mounted, medium wide beam
7m
Ø 1,86 m
ua
5
2.1 kg
555lx 355lx 247lx 181lx 139lx Abstand/Distance
4m
5m
6m
7m
8m
Lamps HIT-TC-CE
HIT-TC-CE
Nightvision LS Systemleuchten Surface-mounted downlights
51
121
Surface-mounted downlights
Surface-mounted LED downlight With 5 x 3 W high performance LEDs, integral thermal monitoring system Schutzklasse I, IP65 , IK08 die cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, housing secured with a grub screw, ceiling mount: 2 drilled holes ø 4 mm, spacing 86 mm, cable entry ø 4-11mm recessed cable, integral transformer and on-board driver
149 86
4
Colour
Light source
Weight
Beam angle γ
8 320 046 019
black
5 x LED 3 W warm white
2.3 kg
11°
8 320 066 019
white
8 320 056 019
silver grey
8320046019
m o c
1630lx 407lx 181lx 102lx
silver grey
u s . w
Surface-mounted LED downlight, linear beam spread Part number
Colour
Light source
8 320 046 029
black
5 x LED 3 W warm white
8 320 066 029
white
8 320 056 029
silver grey
8 320 065 029
white
8 320 055 029
silver grey
w
2.3 kg
C 0 – 180
C 90 – 270
9°
38°
Ø 1,13 m
1630lx 407lx 181lx 102lx Abstand/Distance
2m
Weight
Beam angle γ
2.3 kg
C 0 – 180
C 90 – 270
9°
38°
1,8 m
78lx
2m
35lx
4m
Weight
Beam angle γ
8 320 046 059
black
5 x LED 3 W warm white
2.3 kg
38°
8 320 066 059
white
8 320 056 059
silver grey
4500
19lx
6m
12lx
8m
10 m
5,3 m
78lx
2m
35lx
4m
19lx
6m
12lx
8m
10 m
Ø 6,81 m Ø 5,45 m
8320046059
Abstand/Distance
Light source
Weight
Beam angle γ
black
5 x LED 3 W neutral white
2.3 kg
38°
8 320 065 059
white
8 320 055 059
silver grey
4m
21lx 6m
12lx 8m
7lx 10 m
Ø 6,81 m
Ø 4,09 m Ø 2,72 m Ø 1,36 m
46lx 4m
21lx 6m
12lx 8m
7lx 10 m
Lamps Surface-mounted downlights
90 60 30
Ø 5,45 m
8320045059
2m
90
800 1200
46lx
2m
185lx
52
12 m
60
Ø 4,09 m
LED 655 lm
Abstand/Distance
9lx
I (cd/klm)
LED 655 lm
185lx
Colour
6000
12 m
7,1 m
8320045029
Ø 2,72 m
8 320 045 059
9lx
8,9 m
Ø 1,36 m
Part number
30
3000
10,7 m
LED 655 lm
311lx
Light source
90 60
5,3 m 3,6 m
Abstand/Distance
Colour
I (cd/klm) 90
7,1 m
8320046029
1,8 m
Part number
65lx 10 m
10,7 m
3,6 m
Surface-mounted LED downlight, wide beam
8m
8,9 m
Abstand/Distance
5 x LED 3 W neutral white
6m
LED 655 lm
311lx
Light source
4m
1,7 m
black
Beam angle γ
Ø 1,89 m Ø 1,51 m
Ø 0,76 m
1,1 m
8 320 045 029
w
Weight
9000 12000
Ø 0,38 m
0,6 m
Colour
d a r t n
8320045019
2,8 m
white
8 320 055 019
LED 655 lm
2,8 m
8 320 065 019
e.
30
10 m
2,2 m
11°
8m
1,7 m
Beam angle γ
2.3 kg
6m
6000
65lx
2,2 m
Weight
5 x LED 3 W neutral white
4m
1,1 m
Light source
black
2m
0,6 m
Colour
8 320 045 019
90 60
Ø 1,13 m Ø 0,76 m Ø 0,38 m
Part number
I (cd/klm)
Ø 1,89 m
Ø 1,51 m
Abstand/Distance
Part number
a u .
LED 655 lm
3,4 m
Part number
3,4 m
Surface-mounted LED downlight, narrow beam
LEDs, replacement modules available
30
Surface-mounted downlights Nightvision LS Systemleuchten
84
149
183
Surface-mounted LED downlight Gimbal mounted With 5 x 1 W high performance LEDs, integral thermal monitoring system, Schutzklasse I, IP65 , IK08 die cast aluminium housing, polyester powder coated, gimbal mounted LED board, tilt range 0-15°, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, housing secured with a grub screw, ceiling mount: 3 drilled holes ø 5 mm, on a circular pitch ø 84 mm,cable entry ø 7-10 mm recessed or surface mounted cable, integral transformer and on-board driver
3x
I (cd/klm) 90 60 6000
LED 439 lm
8320146019
Ø 1,22 m Ø 0,81 m Ø 0,41 m
9000
996lx 249lx 111lx
12000 Abstand/Distance
2m
4m
62lx
6m
LED 439 lm
8m
40lx
Ø 2,03 m
Ø 0,41 m
996lx 249lx 111lx Abstand/Distance
Abstand/Distance
0,6 m
w 94lx
2m
4m
w
LED 439 lm
42lx
I (cd/klm) 90
90
60
60 30
800
94lx
2m
42lx
4m
23lx
6m
15lx
8m
10 m
Ø 5,92 m Ø 4,74 m
8320146059
Ø 3,55 m Ø 2,37 m Ø 1,18 m
1200
149lx
1600 Abstand/Distance
37lx
2m
4m
17lx 6m
LED 439 lm
9lx 8m
6lx
Ø 5,92 m
Ø 3,55 m Ø 2,37 m Ø 1,18 m
15°
149lx Abstand/Distance
2m
37lx 4m
silver grey
Part number
Colour
8 320 145 019
black
8 320 165 019
white
8 320 155 019
silver grey
17lx 6m
9lx 8m
m o c
.
e.
Part number
Colour
Light source
Weight
Beam angle γ
8 320 146 029
black
5 x LED 1 W warm white
2.1 kg
C 0 – 180
C 90 – 270
8 320 166 029
white
9°
48°
8 320 156 029
silver grey
Part number
Colour
Light source
Weight
Beam angle γ
8 320 145 029
black
5 x LED 1 W neutral white
2.1 kg
C 0 – 180
C 90 – 270
8 320 165 029
white
9°
48°
8 320 155 029
silver grey
10lx 12 m
Surface-mounted LED downlight, gimbal mounted, wide beam Part number
Colour
Light source
Weight
Beam angle γ
8 320 146 059
black
5 x LED 1 W warm white
2.1 kg
33°
8 320 166 059
white
8 320 156 059
silver grey
Part number
Colour
Light source
Weight
Beam angle γ
8 320 145 059
black
5 x LED 1 W neutral white
2.1 kg
33°
8 320 165 059
white
8 320 155 059
silver grey
10 m
Ø 4,74 m
8320145059
11°
8 320 156 019
12 m
10,7 m
LED 439 lm
30
1,8 m
1,5 m
10 m
10lx
8,9 m
0,9 m
0,6 m
0,3 m
375lx
8m
5,3 m
3,6 m
Abstand/Distance
6m
15lx
7,1 m
8320145029
1,8 m
23lx
1,8 m
375lx
0,3 m
1,8 m
4000
0,9 m
3,6 m
Beam angle γ
2.1 kg
white
u s . w
5,3 m
Weight
5 x LED 1 W neutral white
8 320 166 019
Surface-mounted LED downlight, gimbal mounted, linear beam spread
7,1 m
8320146029
Light source
5 x LED 1 W warm white
10 m
8,9 m
2000 3000
8m
10,7 m
LED 439 lm
11°
Light source
black
40lx
1,5 m
60
6m
1,2 m
90
4m
62lx
1,2 m
I (cd/klm)
2m
Beam angle γ
2.1 kg
Colour
8 320 146 019
d a r t n
Ø 1,22 m Ø 0,81 m
15°
Weight
Part number
10 m
Ø 1,63 m
8320145019
ua
Surface-mounted LED downlight, gimbal mounted, narrow beam
Ø 2,03 m Ø 1,63 m
30
5
6lx 10 m
Lamps LEDs, replacement modules available
Nightvision LS Systemleuchten Surface-mounted downlights
53
Accessories for surface-mounted downlights
Accessories for surface-mounted downlights 20/35 W narrow, medium wide and wide beam Part number
Colour
Description
123 0 311 000
yellow
Dichroic colour filters,
123 0 313 000
blue
internally fitted
123 0 317 000
red
123 0 318 000
green
Part number
Description
123 0 320 940
Radial louvre,
96
internally fitted, to reduce lateral glare
19
96
Acessories for surface-mounted downlights 20/35 W, narrow beam Part number
Description
123 0 312 000
Ribbed glass spreader lense, internally fitted, for linear beam control 96
a u .
m o c
. e d
a r nt
w
u s . w
w
54
Surface-mounted downlights
Accessories for surface-mounted downlights
Accessories for surface-mounted downlights, gimbal mounted, narrow and wide beam
96
70
Part number
Colour
Description
123 0 301 000
yellow
Dichroic colour filters,
123 0 303 000
blue
internally fitted
123 0 307 000
red
123 0 308 000
green
Part number
Description
123 0 300 000
Prismatic glass lense, to widen the beam angle
22
Part number
Description
123 0 299 940
Radial louvre, internally fitted, to reduce lateral glare
70
a u .
Accessories for surface-mounted downlights, 70
gimbal mounted, narrow beam Part number
Description
123 0 302 000
Ribbed glass spreader lense,
m o c
internally fitted, for linear beam control
. e d
a r nt
u s . w
w
w
Nightvision LS Systemleuchten Surface-mounted downlights
55