Simes_2012 by Suntrade Suntrade

a u .

m o c

. e d

a r nt

u s . w

MICROLED 240V

a u .

m o c

. e d

a r nt

u s . w

MICROLED 240V

ÂŽ

Ă&#x2DC; 65 mm.

MICROLED is suitable for decorative illumination or as orientation lighting. The uniqueness of the MICROLED range is the choice of among five colours: white, blue, green, red and amber. This means they can be used in any environment.

a u .

m o c

MICROLED IP67 installed to echo hypothetical stone-slab screws, thus simulating light emitting screws.

. e d

a r nt

u s . w

MICROLED 240V

ÂŽ

Ă&#x2DC; 65 mm.

All MICROLED models have extremely low diffuser surface temperatures. They can withstand stationary loads up to 1000 kg. max.

The LED is mounted on a 240V electric circuit connected to an electric cable. It is then inserted into two technopolymer covers sealed by ultrasonic waves to ensure an IP67 hermetic closure.

a u .

c . e

d a r t n

u s . w

With low profile dimensions (diam. 65 mm and 65 mm deep) the devices are easy to install both indoors and outside, in the ground, on walls and on ceilings.

Solutions for wall recessed use: _ with CLIP may be used in floating floors, plaster board walls or ceiling panels; _ use a polypropylene recessing box to embed the wire in the ground.

Connection to the electric line is done externally. It is advisable to use IP67 rapid connection accessories which are available on request.

MICROLED 240V

Ø 65 mm.

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 front trim 2 mm thick for MICROLED WALK-OVER. Die-cast cover for MICROSPARKS WALK-OVER. Polycarbonate diffuser. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing box in polypropylene. Powdered paint with high corrosion resistance. L.E.D circuit included. IP67 CLASS II

 12 Joule impact.

a u .

Maximum weight 1000 Kg.

m o c

. e d

FINISHING: Aluminium grey (code 14) Stainless steel

(code 19)

a r nt

Luminaire hard wired with rubber cable.

u s . w

FAST CONNECTOR ACCESSORY S.5501 Fast connector M20 (Ø 6÷12 mm) IP67 for single through wiring. To be placed inside the recessing box.

MICROLED 240V

240V

LED circuits are developed to works with the main line 230V/240V 50/60Hz. (LED circuits 24V D.C. and 240V÷24V D.C. transformer available on request) All MICROLED luminaires are supplied with two clips which allow an easy installation for floating walls, floating floors and ceiling mounting. N.B. Thickness must be 5÷15 mm and the diameter of the hole Ø 58 mm.

TOUCH VERSIONS Fittings with this symbol have a glass surface temperature T lower than 75°C. (Values measured at 25°C ambient temperature for indoor).

MICROLED 240V

MICROLED WALK-OVER BOWL DIFFUSER

S.3215.19

WALK-OVER Ø 65 mm.

1 cd/klm

With WHITE LED 1,5W 240V T 39°C 104°

S.3217.19 With BLUE LED 1,5W 240V T 39°C

LED RED, LED AMBER and LED GREEN versions available on request

a u .

m o c

MICROLED WALK-OVER FLAT DIFFUSER

. e d

a r nt

S.3235.19

1 cd/klm

With WHITE LED 1,5W 240V T 39°C

u s . w 104°

S.3237.19

With BLUE LED 1,5W 240V T 39°C

LED RED, LED AMBER and LED GREEN versions available on request

MICROSPARKS 240V

WALK-OVER Ø 65 mm.

MICROSPARKS 12 WINDOWS

S.3255.14 With WHITE LED 2W 240V T 40°C S.3257.14 With BLUE LED 2W 240V T 40°C

LED RED, LED AMBER and LED GREEN versions available on request

a u .

MICROSPARKS 2 WINDOWS

m o c

S.3275.14 With WHITE LED 2W 240V T 40°C S.3277.14

. e d

a r nt

With BLUE LED 2W 240V T 40°C

u s . w

LED RED, LED AMBER and LED GREEN versions available on request

MICROSPARKS 1 WINDOW

S.3285.14 With WHITE LED 2W 240V T 40°C S.3287.14 With BLUE LED 2W 240V T 40°C

LED RED, LED AMBER and LED GREEN versions available on request

MICROLED 240V

MICROLED WALL RECESSED BOWL DIFFUSER C0 102°

S.3245.14

C90 31°+62°

S.3247.14

WALL RECESSED Ø 65 mm.

With WHITE LED 1,5W 240V

With BLUE LED 1,5W 240V LED RED, LED AMBER and LED GREEN versions available on request

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

SIMES OFFICES - Brescia (Italy)

a u .

m o c

. e d

a r nt

u s . w

PLANO

a u .

m o c

. e d

a r nt

u s . w

PLANO

WALK-OVER

PLANO is a new range of innovative in-ground products: - LOW GLASS SURFACE TEMPERATURE < 75°C; - FITTING FLUSH WITH THE FLOOR. By answering those two needs we can extend the applications of inground products, to in-door as well as out-door, especially where in-ground products need to be used where people can walk over safely without shoes.

QR-CBC51 20W 12V GU5,3

a u .

m o c

. e d

a r nt

u s . w

TC-DEL 18W G24q-2

HIT-TC CRI 20W G8,5

PLANO

FULL GLASS version

WALK-OVER

STAINLESS STEEL version The front trim is flush with the ground, so there’s no protrusion to interfere with pedestrian traffic.

Each model is available with dichroic coloured filters which are installed below the protective glass, utilizing the ring provided.

Several PLANO models feature glass surface temperatures less than 75° C.

You can personalise fluorescent models by using plastic films under the glass on which you can print such symbols as: -

a u .

m o c

. e d

directions; numbers; letters; places; ...

a r nt

u s . w

All models have rubber flexible cables. Rapid connector accessories IP68 are available upon request. Connections must be made inside the recessing box.

MINIPLANO

WALK-OVER Ø 120 mm

Die cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Full glass versions 6 mm thick. Stainless steel AISI316 front trim versions with toughened glass 8 mm thick. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing box in polypropylene with external edge in stainless steel. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I for LED and T2 6W versions. CLASS III  for 10W 12V versions.



a u .

12 Joule impact.

m o c

Maximum weight 1000 Kg.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

TOUCH VERSIONS

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 25°C ambient temperature for indoor).

S.5701 Red S.5702 Blue S.5703 Yellow S.5704 Green

The recessing box must be placed at the ground level. 20 cm drainage gravel must be used under the recessing box to allow easy water evacuation. Connection to the main line has to be done into junction boxes.

S.5720

u s . w

FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

240V

MINIPLANO LED 240V don’t need to use any power supply. LED RED, LED AMBER and LED GREEN versions available on request.

MINIPLANO HALOGEN 10W 12V Fittings with dichroic 10W 12V lamp use a remote transformer 240V÷12V placed at the beginning of the main supply line.

DICHROIC COLOURED FILTERS for STAINLESS STEEL TRIM versions only

HONEY COMB ROUND Antiglare filter NOTE: Only for QR-CBC35 10W 12V versions.

MINIPLANO

FULL GLASS - SEMIACID-ETCHED GLASS

S.5430 With ACCENT WHITE LED 3x1W 240V T 41°C

10°

WALK-OVER Ø 120 mm

h(m) 5 4 3 2 1

S.5432 With ACCENT BLUE LED 3x1W 240V T 41°C

0.1 m

E(lx) 10° 1 1 3 8 21 0 (m)

S.5449

36° FULL GLASS - ACID-ETCHED GLASS

With lamp QR-CBC35 10W 12V GU4 38° Lamp position adjustable ± 15° (Without transformer) T 72°C S.5435 With SOFT WHITE LED 1,5W 240V T 39°C

90°

S.5437 With SOFT BLUE LED 1,5W 240V T 39°C S.5445

94°

With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed T 55°C

m o c

S.5448

48°

. e d

a r nt

u s . w

STAINLESS STEEL - SEMIACID-ETCHED GLASS

S.5730.19 With ACCENT WHITE LED 3x1W 240V T 41°C

With lamp QR-CBC35 10W 12V GU4 38° Lamp position adjustable ± 15° (Without transformer) T 72°C

10°

a u .

S.5732.19 With ACCENT BLUE LED 3x1W 240V T 41°C

h(m) 5 4 3 2 1 0.1 m

E(lx) 10° 1 1 3 8 21 0 (m)

S.5749.19

36° STAINLESS STEEL - ACID-ETCHED GLASS

With lamp QR-CBC35 10W 12V GU4 38° Lamp position adjustable ± 15° (Without transformer) T 72°C S.5735.19 With SOFT WHITE LED 1,5W 240V T 39°C

90°

S.5737.19 With SOFT BLUE LED 1,5W 240V T 39°C S.5745.19

94°

With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed T 55°C S.5748.19

48°

With lamp QR-CBC35 10W 12V GU4 38° Lamp position adjustable ± 15° (Without transformer) T 72°C

PLANO

WALK-OVER Ø 190 mm

Die cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Full glass versions 8 mm thick. Stainless steel AISI316 front trim versions with toughened glass 10 mm thick. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing box in polypropylene with external edge in stainless steel. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I CLASS II

for QR-LP111 versions



a u .

12 Joule impact.

m o c

Maximum weight 1000 Kg.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 25°C ambient temperature for indoor).

DICHROIC COLOURED FILTERS for FULL GLASS versions S.5411 Red S.5412 Blue S.5413 Yellow S.5414 Green NOTE: Only for article S.5459

DICHROIC COLOURED FILTERS for STAINLESS STEEL TRIM versions S.5711 Red S.5712 Blue S.5713 Yellow S.5714 Green NOTE: Only for article S.5759.19

TOUCH VERSIONS

u s . w

FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

DMX 512

PLANO with LED RGB 240V has a transformer and DMX signal converter already included. With a DMX switchboard you can control more fittings, completely controlling scenes, speeds and colour sequences. In stand-alone mode (without DMX entry), a pre-programmed colour-changing sequence is activated. Several devices connected to the same electric line, without a DMX switchboard, function with a pre-programmed colour-changing sequence, but in unsynchronized mode. EASY DMX SWITCHBOARD S.5721 DMX programmable elementary switchboard allows to control of only 6 groups of devices, each containing about 20 devices. You can purchase on the market professional DMX switchboards that permit control of up to 170 groups of devices, each containing about 20 devices.

DALI

PLANO LED RGB DALI Upon request we can furnish PLANO with LED RGB 240V with transformer and DALI signal converter already included.

PLANO

FULL GLASS - SEMIACID-ETCHED GLASS

S.5452

10°

6° FULL GLASS - ACID-ETCHED GLASS

h(m) 5 4 3 2 1

With RGB ACCENT LED 3x1W 350 mA (1 red, 1 green, 1 blue) With transformer 240V÷350 mA and signal converter for DMX. T 33°C S.5458

0.1 m

h(m) 20 16 12 8 4

59275 cd

With lamp QR-LP111 35W 12V 8° With transformer 240V÷12V in box IP67 Lamp position adjustable ± 15° T 125°C

0.1 m

E(lx) 10° 1 1 3 8 21 0 (m)

E(lx) 6° 1 1 3 10 44 0 (m)

S.5450

90°

With RGB SOFT LED 3W 24V (red, green, blue) With transformer 240V÷24V and signal converter for DMX. T 31°C

S.5456

50°

With lamp QR-CBC51 20W 12V GU5,3 38° Lamp position adjustable ± 15° (With electronic transformer) T 74°C

88°

With lamp TC-DEL 10W G24q-1 600 lm Lamp position fixed (With electronic ballast) T 60°C

. e d

a r nt

u s . w

STAINLESS STEEL - SEMIACID-ETCHED GLASS

a u .

m o c

S.5459

* Photometrics measured with OSRAM DECOSTAR 51 IRC lamp with very high light output.

S.5752.19

WALK-OVER Ø 190 mm

10°

With RGB ACCENT LED 3x1W 350 mA (1 red, 1 green, 1 blue) With transformer 240V÷350 mA and signal converter for DMX. T 33°C S.5758.19

6° STAINLESS STEEL - ACID-ETCHED GLASS

h(m) 5 4 3 2 1 0.1 m

h(m) 20 16 12 8 4

59275 cd

With lamp QR-LP111 35W 12V 8° With transformer 240V÷12V in box IP67 Lamp position adjustable ± 15° T 125°C

0.1 m

E(lx) 10° 1 1 3 8 21 0 (m)

E(lx) 6° 1 1 3 10 44 0 (m)

S.5750.19

90°

With RGB SOFT LED 3W 24V (red, green, blue) With transformer 240V÷24V and signal converter for DMX. T 31°C S.5756.19

50°

With lamp QR-CBC51 20W 12V GU5,3 38° Lamp position adjustable ± 15° (With electronic transformer) T 74°C S.5759.19

88°

With lamp TC-DEL 10W G24q-1 600 lm Lamp position fixed (With electronic ballast) T 60°C

MEGAPLANO

WALK-OVER Ø 260 mm

Die cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Full glass versions 8 mm thick. Stainless steel AISI316 front trim versions with toughened glass 12 mm thick. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing box in polypropylene with external edge in stainless steel. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included.

IP67 CLASS I on request for CLASS II HIT-TC CRI 20W versions



a u .

12 Joule impact.

m o c

Maximum weight 1000 Kg.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

TOUCH VERSIONS

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 25°C ambient temperature for indoor).

u s . w

The recessing box must be placed at the ground level. 30 cm drainage gravel must be used under the recessing box to allow easy water evacuation. Connection to the main line has to be done into junction boxes. FAST CONNECTOR ACCESSORY S.5503 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box. DICHROIC COLOURED FILTERS for FULL GLASS versions

DICHROIC COLOURED FILTERS for STAINLESS STEEL TRIM versions

S.5416 S.5417 S.5418 S.5419

S.5101 S.5102 S.5103 S.5104

Red Blue Yellow Green

NOTE: Only for HIT-TC CRI 20W and TC-DEL 18W versions.

Red Blue Yellow Green

NOTE: Only for HIT-TC CRI 20W and TC-DEL 18W versions.

MEGAPLANO

FULL GLASS - SEMIACID-ETCHED GLASS

WALK-OVER Ø 260 mm

S.5425 = 24°

C0 23°+31° C90 74°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position fixed With electronic ballast T 62°C S.5427

= 26°

C0 22°+31° C90 68°

FULL GLASS - ACID-ETCHED GLASS

With lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position fixed With electronic ballast T 87°C S.5423

C0 74°

C90 86°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position fixed With electronic ballast T 62°C S.5424

96°

With lamp TC-DEL 18W G24q-2 1200 lm Lamp position fixed With electronic ballast T 61°C

a u .

m o c

. e d

a r nt

u s . w

STAINLESS STEEL - SEMIACID-ETCHED GLASS

S.5725.19

= 24°

C0 23°+31° C90 74°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position fixed With electronic ballast T 62°C S.5727.19

= 26°

STAINLESS STEEL - ACID-ETCHED GLASS

C0 22°+31° C90 68°

With lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position fixed With electronic ballast T 87°C S.5723.19

C0 74°

C90 86°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position fixed With electronic ballast T 62°C S.5724.19

96°

With lamp TC-DEL 18W G24q-2 1200 lm Lamp position fixed With electronic ballast T 61°C

a u .

m o c

. e d

a r nt

u s . w

fotograďŹ a: Enrico Cano

a u .

m o c

. e d

a r nt

w u s . w

a u .

m o c

. e d

a r nt

u s . wLINEAR WALK-OVER

a u .

m o c

. e d

a r nt

u s . w

LINEAR

速

WALK-OVER

LINEAR WALK OVER with fluorescent lamp T5 with symmetric optic illuminates in a very soft way by emitting light with a very wide distribution.

LINEAR FLUORESCENT 21W

LINEAR FLUORESCENT 8W

LINEAR allows to underline the form of the building without spoilting its appearance. The minimalist design and shallow depth allow for installation within the narrowest of recessess or in a linear line to produce an invisible light source.

a u .

m o c

LINEAR - WHITE LED

a r nt

u s . w

LINEAR - BLUE LED

LINEAR - FLUORESCENT ASYMMETRIC 21W

. e d

ÂŽ

LINEAR

WALK-OVER

All models withstand a maximum weight of 500 Kg.

The COOL TOUCH models have glass surface temperatures of less than 75Â°C.

The front trim in AISI316 stainless steel covers the recessing box edges, hiding any imperfections of the holes in the floor.

a u .

c . e

d a r t n

u s . w

A silicone blend adheres the glass diffuser to the aluminium body. The AISI316 stainless steel trim is fixed in place by a screw system that remains invisible when the product is installed.

These photos show how to install and change the lamp. Approach the device from the side without removing the front. The lights already come with rubber flexible cables. Connection to the power supply is made outside the device, using the IP68 fast connector accessory, that must be placed inside the recessing box.

LINEAR WALK-OVER has a durable stainless steel recessing box which is easily removed should maintenance be necessary. There is also a lid to cover the hole before installing the light. The device is fixed to the box by a steel tab.

LINEAR WALK-OVER

Die-cast and extruded aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 front trim 3 mm thick. Toughened acid-etched glass 10 mm thick. 99.98% pure aluminium reflectors. Stainless steel screws. Luminaire hard wired with rubber cable. Silicone gaskets. Recessing box in stainless steel. Silicone gaskets. Powdered paint with high corrosion resistance. LED versions with LED radiation of class 1. Lamp included. IP67 CLASS II



a u .

12 Joule impact.

m o c

Maximun weight 500 Kg.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

u s . w

Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

DALI

DALI LINEAR RGB The S.5930.19 device is complete with 240V÷24V power supply, controllable and programmable according to DALI RGB standards. In stand-alone mode (without DALI entry) a pre-programmed sequence is activated. If several devices are connected, they initiate a pre-programmed colour changing sequence, but it is not synchronised.

ACCESSORIES FOR LINEAR WALK OVER SHORT

ACCESSORIES FOR LINEAR WALK OVER LONG

COLOURED FILTERS

S.5906 S.5907 S.5908 S.5909

S.5916 S.5917 S.5918 S.5919

RED BLUE YELLOW GREEN

To be used for FLUORESCENT versions only.

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 25°C ambient temperature for indoor).

FAST CONNECTOR ACCESSORY S.5503

TOUCH VERSIONS

RED BLUE YELLOW GREEN

To be used for FLUORESCENT versions only.

LINEAR LED

LINEAR SHORT

WALK-OVER

S.5925.19 With SOFT WHITE LED smd 5W With electronic power supply 240V÷10V T 41°C C0 66°

C90 80°

S.5927.19 With SOFT BLUE LED smd 5W With electronic power supply 240V÷10V T 41°C

LED RED, LED AMBER and LED GREEN 365

versions available on request

100

140

460

a u .

m o c

. e d

a r nt

LINEAR LONG

u s . w

S.5930.19

With LED RGB 16W 240V (With power supply/sequencer) Compatible with DALI system T 50°C

C0 68°

C90 104°

S.5935.19 With SOFT WHITE LED smd 15W With electronic power supply 240V÷10V T 50°C

S.5937.19 926

100

140

1021

With SOFT BLUE LED smd 15W With electronic power supply 240V÷10V T 50°C

LED RED, LED AMBER and LED GREEN versions available on request

LINEAR

WALK-OVER

LINEAR SHORT

S.5922.19

C0 80°

C90 88°

= 5°

C0 17°+28° C90 102°

With lamp T5 8W G5 450 lm With electronic ballast Symmetric reflector T 51°C

S.5923.19 With lamp T5 8W G5 450 lm With electronic ballast Asymmetric reflector T 51°C

a u .

100

m o c

365

. e d

89 140

460

a r nt

u s . w

LINEAR LONG

S.5932.19

C0 88°

C90 92°

= 9°

C0 17°+26° C90 108°

100

926

140

1021

With lamp T5 21W G5 2100 lm With electronic ballast Symmetric reflector T 58°C

S.5933.19 With lamp T5 21W G5 2100 lm With electronic ballast Asymmetric reflector T 58°C

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

COMPACT

a u .

m o c

. e d

a r nt

u s . w

COMPACT

WALK-OVER

These simulations illustrate this device’s optical control precision: light emanates with no appreciable emission beyond the vertical line, whereas the light distribution on the wall is soft and clean. These qualities permit wall illumination from the base, with considerable distance between luminaires, even when the devices are installed some distance from the walls.

Given its wall-recessed depth of only 115 mm, COMPACT gives optimum results. Thanks to a high-quality screened reflector with asymmetric light distribution, COMPACT can light wide spaces, projecting light from many meters’ distance without glare.

20W HIT-TC CRI side view

20W HIT-TC CRI front view

a u .

m o c

. e d

a r nt

As this example shows, you can get excellent scenographic illumination, as well as functional lighting by reflection.

u s . w

COMPACT

280 with HIT-TC CRI 20W lamp

COMPACT

WALK-OVER

The 115 mm deep polypropylene recessing box protects the aluminium body against contact with the ground, and permits removal for any maintenance work. The frame must be installed level with the floor during the concrete pouring phase. The stainless steel front trim covers the rim of the hole.

115 mm.

Guaranteed to withstand a maximum weight up to 1000 Kg.

The COOL TOUCH models have glass surface temperatures of less than 75°C, even with 20W and 35W metal halide lamps.

a u .

c . e

COMPACT’s engineering permits insertion of dichroic coloured filters for creative lighting effects.

d a r t n

u s . w

Every COMPACT model is furnished with pre-installed rubber cables. Available on request are IP68 fast connector accessories for power hook-ups that must be positioned inside the housing.

COMPACT

WALK-OVER Ø 210 mm

Die cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 front trim 2 mm thick. Toughened sodic calcic glass 12 mm thick. Luminaire hard wired with rubber cable. Stainless steel screws. Recessing box in polypropylene arranged for cable entries in all 4 sides. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included.

IP67 CLASS I for QR-LP111 versions

CLASS II



a u .

12 Joule impact.

m o c

Maximum weight 1000 Kg.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 25°C ambient temperature for indoor).

u s . w

TOUCH VERSIONS

FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box. DICHROIC COLOURED FILTERS for SQUARE version S.5715 Red S.5716 Blue S.5717 Yellow S.5718 Green NOTE: Only for article S.5199.19

DICHROIC COLOURED FILTERS for ROUND version S.5711 Red S.5712 Blue S.5713 Yellow S.5714 Green NOTE: Only for article S.5189.19

DMX 512

COMPACT with LED RGB 240V has a transformer and DMX signal converter already included. With a DMX switchboard you can control more fittings, completely controlling scenes, speeds and colour sequences. In stand-alone mode (without DMX entry), a pre-programmed colour-changing sequence is activated. Several devices connected to the same electric line, without a DMX switchboard, function with a pre-programmed colour-changing sequence, but in unsynchronized mode. EASY DMX SWITCHBOARD S.5721 DMX programmable elementary switchboard allows to control of only 6 groups of devices, each containing about 20 devices. You can purchase on the market professional DMX switchboards that permit control of up to 170 groups of devices, each containing about 20 devices.

DALI

COMPACT LED RGB DALI Upon request we can furnish COMPACT with LED RGB 240V with transformer and DALI signal converter already included.

COMPACT

WALK-OVER Ø 210 mm

ACID - ETCHED GLASS

S.5180.19

90°

With RGB SOFT LED 3W 24V (red, green, blue) With transformer 240V÷24V and signal converter for DMX. T 31°C

S.5186.19

50°

With lamp QR-CBC51 20W 12V GU5,3 38° Lamp position adjustable ± 15° (With electronic transformer) T 74°C S.5189.19

88°

With lamp TC-DEL 10W G24q-1 600 lm Lamp position fixed (With electronic ballast) T 60°C

* Photometrics measured with OSRAM DECOSTAR 51 IRC lamp with very high light output.

a u .

m o c

. e d

a r nt

SEMIACID - ETCHED GLASS

S.5182.19

S.5188.19

With RGB ACCENT LED 3x1W 350 mA (1 red, 1 green, 1 blue) With transformer 240V÷350 mA and signal converter for DMX. T 33°C

u s . w 10°

6°

h(m) 5 4 3 2 1

With lamp QR-LP111 35W 12V 8° With transformer 240V÷12V in box IP67 Lamp position adjustable ± 15° T 125°C

0.1 m 59275 cd

h(m) 20 16 12 8 4 0.1 m

E(lx) 10° 1 1 3 8 21 0 (m) E(lx) 6° 1 1 3 10 44 0 (m)

COMPACT

WALK-OVER

210 mm

ACID-ETCHED GLASS

S.5190.19

90°

With RGB SOFT LED 3W 24V (red, green, blue) With transformer 240V÷24V and signal converter for DMX. T 31°C

S.5196.19

50°

With lamp QR-CBC51 20W 12V GU5,3 38° Lamp position adjustable ± 15° (With electronic transformer) T 74°C S.5199.19

88°

With lamp TC-DEL 10W G24q-1 600 lm Lamp position fixed (With electronic ballast) T 60°C

* Photometrics measured with OSRAM DECOSTAR 51 IRC lamp with very high light output.

a u .

m o c

a r nt

SEMIACID-ETCHED GLASS

S.5192.19

S.5198.19

6°

h(m) 5 4 3 2 1

With RGB ACCENT LED 3x1W 350 mA (1 red, 1 green, 1 blue) With transformer 240V÷350 mA and signal converter for DMX. T 33°C

u s . w 10°

. e d

With lamp QR-LP111 35W 12V 8° Lamp position adjustable ± 15° With transformer 240V÷12V in box IP67 T 125°C

0.1 m 59275 cd

h(m) 20 16 12 8 4 0.1 m

E(lx) 10° 1 1 3 8 21 0 (m) E(lx) 6° 1 1 3 10 44 0 (m)

a u .

m o c

. e d

a r nt

u s . w

COMPACT

WALK-OVER Ø 280 mm

IP67 CLASS I on request for CLASS II HIT-TC CRI 20W versions



a u .

12 Joule impact.

m o c

Maximum weight 1000 Kg.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

u s . w

FAST CONNECTOR ACCESSORY S.5503 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box. DICHROIC COLOURED FILTERS for ROUND version S.5101 Red S.5102 Blue S.5103 Yellow S.5104 Green Only for HIT-TC CRI 20W and TC-DEL 18W. DICHROIC COLOURED FILTERS for SQUARE version S.5106 Red S.5107 Blue S.5108 Yellow S.5109 Green Only for HIT-TC CRI 20W and TC-DEL 18W.

TOUCH VERSIONS Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 25°C ambient temperature for indoor).

COMPACT

WALK-OVER Ø 280 mm

ACID - ETCHED GLASS

S.5123.19

C0 74°

C90 86°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position fixed With electronic ballast T 62°C S.5124.19

96°

With lamp TC-DEL 18W G24q-2 1200 lm Lamp position fixed With electronic ballast T 61°C

a u .

m o c

a r nt

SEMIACID - ETCHED GLASS

S.5125.19 = 24°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position fixed With electronic ballast T 62°C

u s . w C0 23°+31° C90 74°

. e d

S.5127.19

= 26°

C0 22°+31° C90 68°

With lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position fixed With electronic ballast T 87°C

COMPACT

WALK-OVER

280 mm

ACID - ETCHED GLASS

S.5143.19

C0 62°

C90 84°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position fixed With electronic ballast T 62°C S.5144.19

98°

With lamp TC-DEL 18W G24q-2 1200 lm Lamp position fixed With electronic ballast T 61°C

a u .

m o c

a r nt

SEMIACID - ETCHED GLASS

S.5145.19 = 33°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position fixed With electronic ballast T 62°C

u s . w

C0 21°+26° C90 68°

. e d

S.5147.19

= 26°

C0 22°+31° C90 68°

With lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position fixed With electronic ballast T 87°C

a u .

m o c

. e d

a r nt

u s . w

COMPACT

WALK-OVER Ø 370 mm

Die cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI 316 front trim 3 mm thick. Toughened sodic calcic glass 15 mm thick. Luminaire hard wired with rubber cable. Stainless steel screws. Recessing box in polypropylene arranged for cable entries in all 4 sides. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included.

IP67 CLASS I on request for CLASS II HIT-TC CRI 35W versions



a u .

20 Joule impact.

m o c

Maximum weight 1000 Kg.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 25°C ambient temperature for indoor).

u s . w

TOUCH VERSIONS

FAST CONNECTOR ACCESSORY S.5503 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

METAL HALIDE

SODIUM

Articles S.5139.19 and S.5159.19 with metal halide lamp HIT-DE 70W Rx7s are available on request with sodium lamp HST-DE 70W Rx7s.

COMPACT

WALK-OVER Ø 370 mm

ACID - ETCHED GLASS

S.5133.19

C0 66°

C90 82°

h(m) 10 8 6 4 2

With lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position fixed With electronic ballast T 73°C

0.2 m

S.5134.19

80°

h(m) 5 4 3 2 1

With lamp TC-F 36W 2G10 2800 lm Lamp position fixed With electronic ballast T 66°C

0.2 m

E(lx) 0 1 2 5 37

0 1 2 5 21

0 1 1 3 6

0 1 1 2 2

3 (m)

E(lx) 1 2 6 17 98

1 2 4 11 25

1 1 2 3 3

1 1 1 1 1

3 (m)

E(lx) 0 0 0 0 1 2 13 10 163 102

0 0 1 7 25

E(lx) 0 0 1 1 3 3 23 20 277 172

0 1 2 12 41

a u .

m o c

a r nt

SEMIACID - ETCHED GLASS

S.5137.19 = 26°

With lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position fixed With electronic ballast T 73°C

h(m) 10 8 6 4 2

u s . w

1.5 m

C0 20°+32° C90 66°

1.5 m

C0 22°+31° C90 68°

. e d

S.5139.19

= 24°

With lamp HIT-DE 70W Rx7s 6500 lm Lamp position fixed With electronic ballast T 99°C (On request with sodium lamp)

h(m) 10 8 6 4 2

0 0 1 3 8 3 (m) 0 1 2 5 14 3 (m)

COMPACT

WALK-OVER

370 mm

ACID - ETCHED GLASS h(m) 10 8 6 4 2

S.5153.19

C0 66°

C90 82°

With lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position fixed With electronic ballast T 73°C

0.2 m

h(m) 5 4 3 2 1

S.5154.19

C0 94°

C90 100°

With lamp TC-F 36W 2G10 2800 lm Lamp position fixed With electronic ballast T 66°C

0.2 m

E(lx) 0 1 2 5 37

0 1 2 5 22

0 1 1 3 6

0 1 1 2 2

3 (m)

E(lx) 1 2 6 18 97

1 2 4 11 25

1 1 2 4 3

1 1 1 1 1

3 (m)

E(lx) 0 1 2 14 157

0 0 2 12 94

0 0 2 7 22

a u .

m o c

a r nt

SEMIACID - ETCHED GLASS

S.5157.19 = 29°

With lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position fixed With electronic ballast T 73°C

u s . w

C0 20°+29° C90 70°

. e d

S.5159.19

= 33°

C0 22°+27° C90 64°

With lamp HIT-DE 70W Rx7s 6500 lm Lamp position fixed With electronic ballast T 99°C (On request with sodium lamp)

h(m) 10 8 6 4 2 1.5 m h(m) 10 8 6 4 2 1.5 m

E(lx) 0 0 1 1 3 3 25 21 265 158

0 1 3 12 39

0 0 1 3 8 3 (m) 0 1 2 6 12 3 (m)

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

ZIP-PLUS

a u .

m o c

. e d

a r nt

u s . w

ZIP-PLUS

WALK-OVER

ZIP-PLUS evolved from the ZIP series. The optics have been improved in order to control the beam more precisely. Using new reflectors with anti-glare accessories, the light stays nearly entirely inside the main beam, avoiding annoying glare. In these examples you can appreciate the excellent light control obtainable with 35W metal halide models and the HONEY-COMB accessory.

a u .

m o c

The correct use of optics is also indispensable when illuminating plants, shrubs and trees. In the example shown here there is a tree with a broad distribution of leaves. You can obtain the best light distribution with an optic of about 49°. But to illuminate a tall, narrow tree, it would be better to use a product with optics of 15° or 4°.

. e d

a r nt

HIT-CRI 35W - 49°

HIT-CRI 35W - 15°

HIT-CRI 35W - 4°

u s . w

A wall lit by the same luminaire can have radically different looks: from a soft effect to a more uniform one to an extremely marked, dramatic effect.

HIT-CRI 35W - 49°

HIT-CRI 35W - 15°

HIT-CRI 35W - 4°

HIT-CRI 35W - 49°

HIT-CRI 35W - 15°

HIT-CRI 35W - 4°

ZIP-PLUS

ÂŽ

The ZIP-PLUS line offers many COOL TOUCH models with glass surface temperatures below 75Â°C, for safe walk-over.

WALK-OVER

ZIP-PLUS withstands weights up to 1000 Kg.

Installation and maintenance are fast and easy with the new relamp access system. The coloured filters and HONEY-COMB antiglare filters are installed under the protective glass, using the ring provided.

a u .

m o c

. e d

a r nt

u s . w

The devices are available with rubber cables. This way, connection operations can be accomplished outside the fitting. Fast connector accessories IP67/IP68 are available upon request.

The lamps are housed in a polypropylene recessing box that protects them from direct contact with the ground. The frame must be installed level with the ground. Connection with the electrical line must remain inside the recessing box.

MICROZIP

WALK-OVER Ø 85 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 or aluminium front trim 2 mm thick. Toughened glass 8 mm thick. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing box in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS III  for MICROZIP HALOGEN CLASS II



 for MICROZIP LED

a u .

12 Joule impact.

Maximum weight 1000 Kg.

m o c

. e d

FINISHING: Aluminium grey (code 14) Stainless steel

(code 19)

a r nt

Luminaires hard wired with rubber cable.

MICROZIP HALOGEN 20W 12V Use a remote transformer 240V ÷ 12V placed at the beginning of the supply line.

FAST CONNECTOR ACCESSORY S.5501 Fast connector M20 (Ø 6÷12 mm) IP67 for single through wiring. To be placed inside the recessing box.

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

u s . w

TOUCH VERSIONS

MICROZIP LED 240V Electronic power supply 240V included. 240V

MICROZIP LED

WALK-OVER Ø 85 mm

STAINLESS STEEL FRONT TRIM

S.5815.19

3 cd/klm

With SOFT WHITE LED 1,5W 240V T 38°C S.5817.19 With SOFT BLUE LED 1,5W 240V T 38°C LED RED, LED AMBER and LED GREEN versions available on request

a u .

m o c

. e d

a r nt

STAINLESS STEEL FRONT TRIM

u s . w

S.5835.19

3 cd/klm

With SOFT WHITE LED 1,5W 240V T 38°C S.5837.19 White SOFT BLUE LED 1,5W 240V T 38°C LED RED, LED AMBER and LED GREEN versions available on request

MICROZIP ROUND

WALK-OVER Ø 85 mm

ALUMINIUM FRONT TRIM

S.4888

44°

With lamp QR-CBC35 20W 12V GU4 38° Lamp position fixed (Without transformer) T 110°C

S.4889

34°

With lamp QR-CBC35 20W 12V GU4 38° Lamp position fixed (Without transformer) T 110°C

a u .

m o c

. e d

a r nt

STAINLESS STEEL FRONT TRIM

u s . w

S.5888.19

44°

With lamp QR-CBC35 20W 12V GU4 38° Lamp position fixed (Without transformer) T 110°C

S.5889.19

34°

With lamp QR-CBC35 20W 12V GU4 38° Lamp position fixed (Without transformer) T 110°C

MICROZIP SQUARE

WALK-OVER

85 mm

ALUMINIUM FRONT TRIM

S.4898

44°

With lamp QR-CBC35 20W 12V GU4 38° Lamp position fixed (Without transformer) T 110°C

S.4899

34°

With lamp QR-CBC35 20W 12V GU4 38° Lamp position fixed (Without transformer) T 110°C

a u .

m o c

. e d

a r nt

STAINLESS STEEL FRONT TRIM

u s . w

S.5898.19

44°

With lamp QR-CBC35 20W 12V GU4 38° Lamp position fixed (Without transformer) T 110°C

S.5899.19

34°

With lamp QR-CBC35 20W 12V GU4 38° Lamp position fixed (Without transformer) T 110°C

MINIZIP-PLUS

WALK-OVER Ø 135 mm

 for 12V and RGB versions

CLASS I for 240V versions



12 Joule impact.

a u .

Maximum weight 1000 Kg.

m o c

. e d

FINISHING: Aluminium grey (code 14) Stainless steel

(code 19)

a r nt

MINIZIP-PLUS HALOGEN 12V Fittings with 35W 12V dichroic lamp use a remote transformer 240V ÷ 12V placed at the beginning of the supply line.

u s . w

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

FAST CONNECTOR ACCESSORY S.5502

S.5811 - EASY RGB CONTROLLER

DICHROIC COLOURED FILTERS for ROUND and SQUARE versions

MASTER/SLAVE CONTROL UNIT IN IP56 BOX 340x260x130 mm. With electronic power supply 30W 240V, sequencer and terminal block for up to 10 luminaires. By a remote infrared control possibility to: 1. Run a pre-programmed RGB colour sequence of 60 sec.(not modificable); 2. Set manually the static desired colour by dimming independently the 3 LED. It is possible to synchronize max 50 luminaires simultaneously by using max 5 BOXES S.5811.

TOUCH VERSIONS

Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

S.5701 Red S.5702 Blue S.5703 Yellow S.5704 Green NOTE: The dichroic coloured filters can be used only on fluorescent T2 6W or L.V. 20W versions.

S.5814 - ADVANCED RGB CONTROLLER

EASY DMX SWITCHBOARD S.5721

DMX 512 CONTROL UNIT IN IP56 BOX 340x260x130 mm. Supplied with electronic power supply 30W 240V and DMX 512 interface, for max 10 luminaires.. Using a DMX control unit you have the complete control of scenes and colours (So the 10 connected luminaires will be synchronized). With professional DMX control units is possible to manage up to 170 BOXES in synchronized or independent way.

Simple programmable DMX switchboard that allows to control only 6 groups of fittings, every group for about 20 fittings. (Professional DMX switchboards that allow to control up to 170 groups of fittings, every group for about 20 fittings, available on the market)

MINIZIP-PLUS LED ROUND

ACCENT LED RGB STAINLESS STEEL TRIM

WALK-OVER Ø 135 mm

S.8810.19

10°

With RGB ACCENT LED circuit 3W 350 mA Circuit with 3 LED 1W 350 mA and 6° beam lens: _ 1 red _ 1 green _ 1 blue (Power supply and RGB controller separated) T 33°C

ACCENT LED STAINLESS STEEL TRIM

a u .

m o c

S.8800.19 With ACCENT WHITE LED 3x1W 240V T 33°C

. e d

S.8802.19 10°

With ACCENT BLUE LED 3x1W 240V T 33°C

a r nt

LED RED, LED AMBER and LED GREEN versions available on request

u s . w

w SOFT LED STAINLESS STEEL TRIM

S.8805.19 With SOFT WHITE LED 1,5W 240V T 31°C 90°

S.8807.19 With SOFT BLUE LED 1,5W 240V T 31°C Versions with SOFT LED RED, LED AMBER and LED GREEN lamps available on request

MINIZIP-PLUS LED SQUARE ACCENT LED RGB STAINLESS STEEL TRIM

WALK-OVER

135 mm

S.8830.19

10°

With RGB ACCENT LED circuit 3W 350 mA Circuit with 3 LED 1W 350 mA and 6° beam lens: _ 1 red _ 1 green _ 1 blue (Power supply and RGB controller separated) T 33°C

ACCENT LED STAINLESS STEEL TRIM

a u .

m o c

S.8820.19 With ACCENT WHITE LED 3x1W 240V T 33°C

. e d

S.8822.19

10°

With ACCENT BLUE LED 3x1W 240V T 33°C

a r nt

LED RED, LED AMBER and LED GREEN versions available on request

u s . w

w SOFT LED STAINLESS STEEL TRIM

S.8825.19 With SOFT WHITE LED 1,5W 240V T 31°C 90°

S.8827.19 With SOFT BLUE LED 1,5W 240V T 31°C Versions with SOFT LED RED, LED AMBER and LED GREEN lamps available on request

MINIZIP-PLUS ROUND

WALK-OVER Ø 135 mm

ALUMINIUM FRONT TRIM

S.7845

70°

With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed T 47°C

0.1 m

S.7846

40°

0.1 m

With lamp QR-CBC51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer) T 114°C

0.1 m 920 cd

With lamp QPAR16 35W 240V GU10 25° Lamp position adjustable ± 15° T 170°C

c . e

u s . w

S.8845.19

70°

0.1 m 269 cd

595 cd

With lamp QR-CBC51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer) T 114°C

h(m) 5 4 3 2 1

h(m) 5 4 3 2 1 0.1 m

920 cd

With lamp QPAR16 35W 240V GU10 25° Lamp position adjustable ± 15° T 170°C

h(m) 5 4 3 2 1 0.1 m

S.8849.19

44°

h(m) 2.0 1.6 1.2 0.8 0.4

0.1 m

S.8847.19

20°

193 cd/klm

With lamp QPAR16 35W 240V GU10 25° Lamp position adjustable ± 15° T 170°C S.8848.19

42°

h(m) 5 4 3 2 1

0.1 m

With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed T 47°C S.8846.19

40°

a u .

om 750 cd

With lamp QR-CBC51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer) T 114°C

r t n

STAINLESS STEEL FRONT TRIM

h(m) 5 4 3 2 1

0.1 m

S.7849

44°

h(m) 5 4 3 2 1

595 cd

S.7847

20°

h(m) 5 4 3 2 1

269 cd

With lamp QPAR16 35W 240V GU10 25° Lamp position adjustable ± 15° T 170°C S.7848

42°

h(m) 2.0 1.6 1.2 0.8 0.4

193 cd/klm

With lamp QR-CBC51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer) T 114°C

750 cd

h(m) 5 4 3 2 1 0.1 m

E(lx) 1 1 3 10 42

1 1 2 5 8

0.4

E(lx) 0 1 1 4 28

0 0 1 2 6

0 1 1 1 1

0 0 0 0 0

0.8 1.2 (m) 0 0 1 1 1

0 0 0 0 0

0.5

1 1.5 (m)

E(lx) 1 1 3 9 64

1 1 2 6 16

0 1 1 2 2

1 1.5 (m)

0 0 1 1 1

0.5

E(lx) 1 2 4 13 61

1 1 2 3 4

0.5

1 1.5 (m)

E(lx) 1 2 4 12 113

1 2 4 11 7

1 2 3 1 1

0.5

1 1.5 (m)

E(lx) 1 1 3 10 42

1 1 2 5 8

0.4

E(lx) 0 1 1 4 28

0 0 1 2 6

0 0 0 1 0

0 1 1 1 1

0 0 0 0 0

1 1 0 0 0

0 0 0 0 0

0.8 1.2 (m) 0 0 1 1 1

0 0 0 0 0

1 1.5 (m)

0.5

E(lx) 1 1 3 9 64

1 1 2 6 16

0 1 1 2 2

0.5

1 1.5 (m)

E(lx) 1 2 4 13 61

1 1 2 3 4

0.5

E(lx) 1 2 4 12 113

1 2 4 11 7

1 2 3 1 1

0.5

1 1.5 (m)

0 0 0 1 0

0 0 1 1 1

0 0 0 0 0

1 1.5 (m) 1 1 0 0 0

MINIZIP-PLUS SQUARE

WALK-OVER

135 mm

ALUMINIUM FRONT TRIM

S.7865

82°

With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed T 47°C

0.1 m

S.7866

42°

0.1 m

With lamp QR-CBC51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer) T 114°C

0.1 m

With lamp QPAR16 35W 240V GU10 25° Lamp position adjustable ± 15° T 170°C

om 1215 cd

With lamp QR-CBC51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer) T 114°C

u s . w

S.8865.19

82°

0.1 m 162 cd

497 cd

With lamp QR-CBC51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer) T 114°C

h(m) 5 4 3 2 1

h(m) 5 4 3 2 1 0.1 m

872 cd

With lamp QPAR16 35W 240V GU10 25° Lamp position adjustable ± 15° T 170°C

h(m) 5 4 3 2 1 0.1 m

S.8869.19

38°

h(m) 2.0 1.6 1.2 0.8 0.4

0.1 m

S.8867.19

22°

214 cd/klm

With lamp QPAR16 35W 240V GU10 25° Lamp position adjustable ± 15° T 170°C S.8868.19

48°

h(m) 5 4 3 2 1

0.1 m

With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed T 47°C S.8866.19

42°

c . e

With lamp QR-CBC51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer) T 114°C

1215 cd

E(lx) 1 1 3 11 50

1 1 3 6 11

0.4

E(lx) 0 0 1 2 18

0 0 1 2 4

h(m) 5 4 3 2 1 0.1 m

1 1 1 2 1

0 0 1 1 0

0.8 1.2 (m) 0 0 0 1 1

0 0 0 0 0

1 1.5 (m)

0.5

E(lx) 1 1 2 8 58

1 1 2 6 18

0 1 1 2 3

0.5

1 1.5 (m)

E(lx) 1 2 4 13 65

1 1 2 3 4

0.5

E(lx) 1 3 6 19 165

1 2 6 15 10

1 2 2 1 1

0.5

1 1.5 (m)

E(lx) 1 1 3 11 50

1 1 3 6 11

0.4

E(lx) 0 0 1 2 18

0 0 1 2 4

a u .

0.1 m

r t n

STAINLESS STEEL FRONT TRIM

h(m) 5 4 3 2 1

872 cd

S.7869

38°

h(m) 5 4 3 2 1

497 cd

S.7867

22°

h(m) 5 4 3 2 1

162 cd

With lamp QPAR16 35W 240V GU10 25° Lamp position adjustable ± 15° T 170°C S.7868

48°

h(m) 2.0 1.6 1.2 0.8 0.4

214 cd/klm

0 0 0 1 0

0 1 1 1 1

0 0 0 0 0

1 1.5 (m)

1 1 1 2 1

1 1 0 0 0

0 0 1 1 0

0.8 1.2 (m) 0 0 0 1 1

0 0 0 0 0

0.5

1 1.5 (m)

E(lx) 1 1 2 8 58

1 1 2 6 18

0 1 1 2 3

0.5

1 1.5 (m)

E(lx) 1 2 4 13 65

1 1 2 3 4

0.5

1 1.5 (m)

E(lx) 1 3 6 19 165

1 2 6 15 10

1 2 2 1 1

0.5

1 1.5 (m)

0 0 0 1 0

0 1 1 1 1

0 0 0 0 0

1 1 0 0 0

a u .

m o c

. e d

a r nt

u s . w

ZIP-PLUS

WALK-OVER Ø 210 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 or aluminium front trim 2 mm thick. 99.98% pure aluminium reflectors. Toughened glass 10 mm thick. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing box in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

12 Joule impact.

Maximum weight 1000 Kg.

m o c

. e d

FINISHING: Aluminium grey (code 14) Stainless steel

(code 19)

a r nt

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

u s . w

TOUCH VERSIONS

FAST CONNECTOR ACCESSORY S.5502

S.5710 HONEY COMB ROUND Antiglare filter

Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

NOTE: Only for HIT-TC CRI 20W versions. DICHROIC COLOURED FILTERS for ROUND version S.5711 Red S.5712 Blue S.5713 Yellow S.5714 Green S.5719 HONEY COMB SQUARE Antiglare filter NOTE: Only for HIT-TC CRI 20W versions. DICHROIC COLOURED FILTERS for SQUARE version S.5715 Red S.5716 Blue S.5717 Yellow S.5718 Green NOTE: The coloured filters can be used only on HIT-TC CRI 20W and TC-T 18W versions.

NARROW BEAM REFLECTOR

WIDE BEAM REFLECTOR

Metal halide versions with 8° narrow beam reflectors are available on request with 18° wide beam reflectors.

ZIP-PLUS ROUND

WALK-OVER Ø 210 mm

ALUMINIUM FRONT TRIM

S.7853

42°

h(m) 10 8 6 4 2

758 cd/klm

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast T 75°C

0.2 m

S.7856

h(m) 5 4 3 2 1

527 cd

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° T 119°C

48°

0.2 m

S.7860

68°

h(m) 5 4 3 2 1

200 cd/klm

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 54°C

0.2 m

E(lx) 0 1 1 5 31

0 1 1 3 8

0 0 1 1 1

0 0 0 0 0

3 (m)

E(lx) 1 2 4 14 62

1 1 2 5 6

0 1 1 1 1

0 0 0 0 0

3 (m)

E(lx) 0 1 2 7 38

0 1 1 3 5

0 0 1 1 1

0 0 0 0 0

3 (m)

E(lx) 0 1 1 5 32

0 1 1 2 5

0 0 0 1 1

0 0 0 0 0

3 (m)

a u .

m o c

. e d

a r nt

ALUMINIUM FRONT TRIM

S.7855

h(m) 10 8 6 4 2

1197 cd

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° T 119°C

u s . w 32°

S.7857

8°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request 18° beam reflector) T 75°C S.7858

6°

With lamp QR-LP 111 50W 12V 8° With transformer 240V÷12V Lamp position adjustable ± 15° T 141°C

0.2 m 14873 cd/klm 3370 cd/klm

18°

8° 40737 cd

h(m) 20 16 12 8 4 0.2 m

E(lx) 18° 0 0 1 3 18

E(lx) 8° 1 1 3 10 43

0 (m)

E(lx) 1 2 5 12 30

1 2 3 4 3

1 1 1 1 0

0 0 0 0 0

3 (m)

ZIP-PLUS ROUND

WALK-OVER Ø 210 mm

STAINLESS STEEL FRONT TRIM

S.8853.19

42°

h(m) 10 8 6 4 2

758 cd/klm

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast T 75°C

0.2 m

S.8856.19

h(m) 5 4 3 2 1

527 cd

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° T 119°C 48°

0.2 m

S.8860.19

68°

h(m) 5 4 3 2 1

200 cd/klm

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 54°C

0.2 m

E(lx) 0 1 1 5 31

0 1 1 3 8

0 0 1 1 1

0 0 0 0 0

3 (m)

E(lx) 1 2 4 14 62

1 1 2 5 6

0 1 1 1 1

0 0 0 0 0

3 (m)

E(lx) 0 1 2 7 38

0 1 1 3 5

0 0 1 1 1

0 0 0 0 0

3 (m)

E(lx) 0 1 1 5 32

0 1 1 2 5

0 0 0 1 1

0 0 0 0 0

3 (m)

a u .

m o c

. e d

a r nt

STAINLESS STEEL FRONT TRIM

S.8855.19

h(m) 10 8 6 4 2

1197 cd

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° T 119°C

u s . w 32°

S.8857.19

8°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request 18° beam reflector) T 75°C S.8858.19

6°

With lamp QR-LP 111 50W 12V 8° With transformer 240V÷12V Lamp position adjustable ± 15° T 141°C

0.2 m 14873 cd/klm 3370 cd/klm

18°

8° 40737 cd

h(m) 20 16 12 8 4 0.2 m h(m) 20 16 12 8 4 0.2 m

E(lx) 8° 1 1 3 10 43

E(lx) 18° 0 0 1 3 18

0 (m)

E(lx) 1 2 5 12 30

1 2 3 4 3

1 1 1 1 0

0 0 0 0 0

3 (m)

ZIP-PLUS SQUARE

210 mm

WALK-OVER

ALUMINIUM FRONT TRIM

S.7873

46°

h(m) 10 8 6 4 2

581 cd/klm

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast T 75°C

0.2 m

S.7876

h(m) 5 4 3 2 1

429 cd

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° T 119°C

54°

0.2 m

S.7880

68°

h(m) 5 4 3 2 1

200 cd/klm

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 54°C

0.2 m

E(lx) 0 0 1 3 24

0 0 1 2 8

0 0 1 1 1

0 0 0 0 0

3 (m)

E(lx) 1 1 4 12 53

1 1 2 4 6

0 1 1 1 1

0 0 0 0 0

3 (m)

E(lx) 0 1 2 7 34

0 1 2 3 5

0 0 1 1 1

0 0 0 0 0

3 (m)

E(lx) 0 1 1 4 29

0 1 1 2 5

0 0 0 1 1

0 0 0 0 0

3 (m)

a u .

m o c

. e d

a r nt

ALUMINIUM FRONT TRIM

S.7875

h(m) 10 8 6 4 2

1164 cd

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° T 119°C

u s . w 30°

S.7877

8°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request 18° beam reflector) T 75°C S.7878

6°

With lamp QR-LP 111 50W 12V 8° With transformer 240V÷12V Lamp position adjustable ± 15° T 141°C

0.2 m 14873 cd/klm 3370 cd/klm

18°

8° 40737 cd

h(m) 20 16 12 8 4 0.2 m

E(lx) 18° 0 0 1 3 18

E(lx) 8° 1 1 3 10 43

0 (m)

E(lx) 1 2 5 12 30

1 2 3 4 3

1 1 1 1 0

0 0 0 0 0

3 (m)

ZIP-PLUS SQUARE

WALK-OVER

210 mm

STAINLESS STEEL FRONT TRIM

S.8873.19

46°

h(m) 10 8 6 4 2

581 cd/klm

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast T 75°C

0.2 m

S.8876.19

h(m) 5 4 3 2 1

429 cd

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° T 119°C

54°

0.2 m

S.8880.19

68°

h(m) 5 4 3 2 1

200 cd/klm

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 54°C

0.2 m

E(lx) 0 0 1 3 24

0 0 1 2 8

0 0 1 1 1

0 0 0 0 0

3 (m)

E(lx) 1 1 4 12 53

1 1 2 4 6

0 1 1 1 1

0 0 0 0 0

3 (m)

E(lx) 0 1 2 7 34

0 1 2 3 5

0 0 1 1 1

0 0 0 0 0

3 (m)

E(lx) 0 1 1 4 29

0 1 1 2 5

0 0 0 1 1

0 0 0 0 0

3 (m)

a u .

m o c

. e d

a r nt

STAINLESS STEEL FRONT TRIM

S.8875.19

h(m) 10 8 6 4 2

1164 cd

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° T 119°C

u s . w 30°

S.8877.19

8°

With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request 18° beam reflector) T 75°C S.8878.19

6°

With lamp QR-LP 111 50W 12V 8° With transformer 240V÷12V Lamp position adjustable ± 15° T 141°C

0.2 m 14873 cd/klm 3370 cd/klm

18°

8° 40737 cd

h(m) 20 16 12 8 4 0.2 m

E(lx) 18° 0 0 1 3 18

E(lx) 8° 1 1 3 10 43

0 (m)

E(lx) 1 2 5 12 30

1 2 3 4 3

1 1 1 1 0

0 0 0 0 0

3 (m)

a u .

m o c

. e d

a r nt

u s . w

MEGAZIP-PLUS

WALK-OVER Ø 280 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 or aluminium front trim 2 mm thick. 99.98% pure aluminium reflectors. Toughened glass 12 mm thick. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing box in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included.

IP67 CLASS I



a u .

12 Joule impact.

Maximum weight 1000 Kg.

m o c

. e d

FINISHING: Aluminium grey (code 14) Stainless steel

(code 19)

a r nt

NARROW BEAM REFLECTOR

FAST CONNECTOR ACCESSORY S.5503

S.5500 ANTIGLARE SHIELD To be used only for HIT-CRI 4° versions.

Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

S.5700

S.5705

HONEY COMB ROUND Antiglare filter Only for HIT-CRI 35W version.

HONEY COMB SQUARED Antiglare filter Only for HIT-CRI 35W version.

DICHROIC COLOURED FILTERS for ROUND version S.5101 Red S.5102 Blue S.5103 Yellow S.5104 Green Only for HIT-CRI 35W and TC-T 26W.

DICHROIC COLOURED FILTERS for SQUARE version S.5106 Red S.5107 Blue S.5108 Yellow S.5109 Green Only for HIT-CRI 35W and TC-T 26W.

WIDE BEAM REFLECTOR

Metal halide versions with 4° narrow beam reflectors are available on request with wide beam reflectors. (HIT-CRI 35W - 15°) (HIT-CRI 70W - 14°)

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

u s . w

TOUCH VERSIONS

METAL HALIDE

SODIUM

MEGAZIP-PLUS fittings in HIT-DE 70W Rx7s metal halide version with asymmetric reflector, on request, are available with HST-DE 70W Rx7s sodium lamp, working with the same gear.

MEGAZIP-PLUS ROUND

WALK-OVER Ø 280 mm

ALUMINIUM FRONT TRIM

S.8513

49°

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° T 117°C

0.2 m

S.8514

70°

0.2 m

S.8517

c . e

r t n

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request 14° beam reflector) T 117°C

u s . w

a u .

30624 cd/klm 3192 cd/klm

With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 15° (On request 15° beam reflector) T 75°C S.8518

4°

h(m) 5 4 3 2 1

271 cd/klm

With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed T 60°C

ALUMINIUM FRONT TRIM

4°

h(m) 10 8 6 4 2

418 cd/klm

4°

15°

19342 cd/klm 2893 cd/klm

4°

14°

h(m) 20 16 12 8 4

0.2 m h(m) 25 20 15 10 5 0.2 m

E(lx) 1 2 4 13 80

1 1 2 4 6

0 1 1 1 1

0 0 0 0 0

6 (m)

E(lx) 1 2 5 15 71

1 2 3 7 12

1 1 1 2 1

0 0 1 1 0

3 (m)

E(lx) 15° 0 1 2 5 30

E(lx) 4° 3 5 9 21 44

0 (m)

0 (m) E(lx) 4° 2 3 7 17 56

E(lx) 14° 0 1 1 5 29

0 (m)

ALUMINIUM FRONT TRIM

S.8519 = 28°

C0 16°+24° C90 96°

With lamp HIT-DE 70W Rx7s 6500 lm Lamp position fixed T 119°C (On request with sodium lamp)

602 cd/klm

h(m) 10 8 6 4 2 1.5 m

E(lx) 2 4 17 63 182

2 4 14 36 35

1 3 6 4 2

1 1 1 1 0

6 (m)

MEGAZIP-PLUS ROUND

WALK-OVER Ø 280 mm

STAINLESS STEEL FRONT TRIM

S.8523.19

49°

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° T 117°C

0.2 m

S.8524.19

70°

0.2 m

S.8527.19

c . e

r t n

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request 14° beam reflector) T 117°C

u s . w

4°

15°

19342 cd/klm 2893 cd/klm

4°

14°

E(lx) 1 2 4 13 80

1 1 2 4 6

0 1 1 1 1

0 0 0 0 0

6 (m)

E(lx) 1 2 5 15 71

1 2 3 7 12

1 1 1 2 1

0 0 1 1 0

3 (m)

a u .

30624 cd/klm 3192 cd/klm

With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 15° (On request 15° beam reflector) T 75°C S.8528.19

4°

h(m) 5 4 3 2 1

271 cd/klm

With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed T 60°C

STAINLESS STEEL FRONT TRIM

4°

h(m) 10 8 6 4 2

418 cd/klm

h(m) 20 16 12 8 4

0.2 m h(m) 25 20 15 10 5 0.2 m

E(lx) 15° 0 1 2 5 30

E(lx) 4° 3 5 9 21 44

0 (m)

0 (m) E(lx) 4° 2 3 7 17 56

E(lx) 14° 0 1 1 5 29

0 (m)

STAINLESS STEEL FRONT TRIM

S.8529.19 = 28°

C0 16°+24° C90 96°

With lamp HIT-DE 70W Rx7s 6500 lm Lamp position fixed T 119°C (On request with sodium lamp)

602 cd/klm

h(m) 10 8 6 4 2 1.5 m

E(lx) 2 4 17 63 182

2 4 14 36 35

1 3 6 4 2

1 1 1 1 0

6 (m)

MEGAZIP-PLUS SQUARE

280 mm

WALK-OVER

ALUMINIUM FRONT TRIM

S.8543

49°

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° T 117°C

0.2 m

S.8544

69°

0.2 m

S.8547

c . e

r t n

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request 14° beam reflector) T 117°C

u s . w

a u .

36511 cd/klm 3049 cd/klm

With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 15° (On request 16° beam reflector) T 75°C S.8548

4°

h(m) 5 4 3 2 1

293 cd/klm

With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed T 60°C

ALUMINIUM FRONT TRIM

4°

h(m) 10 8 6 4 2

418 cd/klm

4°

16°

20218 cd/klm 2885 cd/klm

4°

14°

h(m) 20 16 12 8 4

0.2 m h(m) 25 20 15 10 5 0.2 m

E(lx) 1 2 4 13 80

1 1 2 4 6

0 1 1 1 1

0 0 0 0 0

6 (m)

E(lx) 1 2 5 16 76

1 2 3 8 13

1 1 1 2 1

0 1 1 1 0

3 (m)

E(lx) 16° 0 1 2 5 30

E(lx) 4° 3 5 10 23 48

0 (m)

0 (m) E(lx) 4° 2 3 6 16 57

E(lx) 14° 0 1 1 4 28

0 (m)

ALUMINIUM FRONT TRIM

S.8549 = 21°

C0 9°+29° C90 100°

With lamp HIT-DE 70W Rx7s 6500 lm Lamp position lamp fixed T 119°C (On request with sodium lamp)

608 cd/klm

h(m) 10 8 6 4 2 1.5 m

E(lx) 2 5 18 63 172

2 4 15 37 30

2 3 5 4 1

1 1 1 1 0

6 (m)

MEGAZIP-PLUS SQUARE

WALK-OVER

280 mm

STAINLESS STEEL FRONT TRIM

S.8553.19

49°

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° T 117°C

0.2 m

S.8554.19

69°

0.2 m

S.8557.19

c . e

r t n

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request 14° beam reflector) T 117°C

u s . w

4°

16°

20218 cd/klm 2885 cd/klm

4°

14°

E(lx) 1 2 4 13 80

1 1 2 4 6

0 1 1 1 1

0 0 0 0 0

6 (m)

E(lx) 1 2 5 16 76

1 2 3 8 13

1 1 1 2 1

0 1 1 1 0

3 (m)

a u .

36511 cd/klm 3049 cd/klm

With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 15° (On request 16° beam reflector) T 75°C S.8558.19

4°

h(m) 5 4 3 2 1

293 cd/klm

With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed T 60°C

STAINLESS STEEL FRONT TRIM

4°

h(m) 10 8 6 4 2

418 cd/klm

h(m) 20 16 12 8 4

0.2 m h(m) 25 20 15 10 5 0.2 m

E(lx) 16° 0 1 2 5 30

E(lx) 4° 3 5 10 23 48

0 (m)

0 (m) E(lx) 4° 2 3 6 16 57

E(lx) 14° 0 1 1 4 28

0 (m)

STAINLESS STEEL FRONT TRIM

S.8559.19 = 21°

C0 9°+29° C90 100°

With lamp HIT-DE 70W Rx7s 6500 lm Lamp position fixed T 119°C (On request with sodium lamp)

608 cd/klm

h(m) 10 8 6 4 2 1.5 m

E(lx) 2 5 18 63 172

2 4 15 37 30

2 3 5 4 1

1 1 1 1 0

6 (m)

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

SPARKS

a u .

m o c

. e d

a r nt

u s . w

SPARKS

速

DRIVE-OVER AND WALL RECESSED

You can obtain wonderful effects with SPARKS. You have to understand the different types of distribution of each SPARKS version in order to use them in the right way. Metal halide lamp or halogen lamp fittings create very marked horizontal effects, because the lamp focus is over the ground. However a certain light quantity is emitted towards the vertical. The fittings with fluorescent lamps create softer horizontal effects and a vertical floodlight more uniform, so they are suitable for the contemporary lighting of floor and lateral walls. In the simulations you can see the difference among the offered light sources.

HIT-TC CRI 35W G8,5

SIMULATION - SPARKS 2 WINDOWS HIT-TC CRI 35W G8,5

QT12 50W GY6,35

a u .

SIMULATION - SPARKS 2 WINDOWS QT12 50W 12V GY6,35

m o c

. e d

a r nt

u s . w

TC-T 18W Gx24d-2

SIMULATION - SPARKS 2 WINDOWS TC-T 18W Gx24d-2

SPARKS

DRIVE-OVER AND WALL RECESSED

With SPARKS you can create wonderful horizontal effects. It is used primarily in-ground, wherever vehicles may pass over slowly, such as in public places with limited traffic access. SPARKS are guaranteed to withstand weight up to 2000 kg at a maximum speed of 10 km/h

The cap’s surface temperature always stays below 75° C.

a u .

c . e

d a r t n

u s . w

The protective cap is bevelled 45° to reduce blows by vehicles. It juts only 35 mm from the ground, so it doesn’t impede the passage of vehicles or pedestrians.

The device is housed in a polypropylene/polycarbonate container, which can be installed during concrete pouring or asphalting. The container: _withstands vehicle weights; _protects the device from direct contact with the ground; _is easily removed for maintenance.

A cut-down portion of flexible rubber tube is included with every SPARKS model. Electrical connection must take place outside the device. We advise using IP68 fast connector accessory, which is supplied on request.

MINISPARKS DRIVE-OVER Ø 150 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Protective guard of 8 mm thickness. Toughened prismed glass diffuser. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing tube in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

25 Joule impact.

m o c

Driveover 2000 Kg at 10 Km/h.

. e d

COLOUR: Aluminium grey (code 14)

a r nt

u s . w

TOUCH VERSIONS Fittings with this symbol have a surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

MINISPARKS DRIVE-OVER Ø 150 mm

S.4811

lux

With lamp QT12 35W 12V GY6,35 600 lm With transformer 40VA 240V÷12V T 75°C S.4812

lux

With lamp TC-B 11W E27 600 lm T 40°C

a u .

S.4821 With lamp QT12 35W 12V GY6,35 600 lm With transformer 40VA 240V÷12V T 75°C

lux

c . e

d a r t n

S.4822

lux

With lamp TC-B 11W E27 600 lm T 40°C

u s . w

S.4831

lux

With lamp QT12 35W 12V GY6,35 600 lm With transformer 40VA 240V÷12V T 75°C S.4832

lux

With lamp TC-B 11W E27 600 lm T 40°C

SPARKS DRIVE-OVER AND WALL RECESSED Ø 220 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Protective guard of 8 mm thickness. Toughened prismed glass diffuser. Stainless steel screws. SPARKS DRIVE OVER hard wired with rubber cable. SPARKS WALL RECESSED supplied with double cable entries. Recessing tube in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 for SPARKS DRIVE-OVER IP65 for SPARKS WALL RECESSED CLASS I



a u .

25 Joule impact.

m o c

Driveover 2000 Kg at 10 Km/h.

. e d

COLOUR: Aluminium grey (code 14)

a r nt

u s . w

TOUCH VERSIONS Fittings with this symbol have a surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

SPARKS DRIVE-OVER Ø 220 mm

S.4816

lux

With lamp HIT-TC CRI 35W G8,5 3300 lm T 55°C

S.4818

lux

With lamp QT12 50W 12V GY6,35 930 lm With transformer 60VA 240V÷12V T 65°C S.4816 S.4818

S.4819

S. 4819

lux

With lamp TC-T 18W Gx24d-2 1200 lm T 40°C

a u .

S.4826 With lamp HIT-TC CRI 35W G8,5 3300 lm T 55°C

lux

c . e

d a r t n

S.4828

lux

With lamp QT12 50W 12V GY6,35 930 lm With transformer 60VA 240V÷12V T 65°C

S.4826 S.4828

S.4829

u s . w

S.4829

lux

With lamp TC-T 18W Gx24d-2 1200 lm T 40°C

S.4836

lux

With lamp HIT-TC CRI 35W G8,5 3300 lm T 55°C

S.4838

lux

With lamp QT12 50W 12V GY6,35 930 lm With transformer 60VA 240V÷12V T 65°C S.4836 S.4838

S.4839

lux

With lamp TC-T 18W Gx24d-2 1200 lm T 40°C

SPARKS WALL RECESSED Ø 220 mm

S.4814

lux

With lamp QT12 50W 12V GY6,35 930 lm With transformer 60VA 240V÷12V

a u .

S.4824 With lamp QT12 50W 12V GY6,35 930 lm With transformer 60VA 240V÷12V

c . e

d a r t n

u s . w

S.4804 With lamp QT12 50W 12V GY6,35 930 lm With transformer 60VA 240V÷12V

lux

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

BOWL

a u .

m o c

. e d

a r nt

u s . w

BOWL

DRIVE-OVER

BOWL, with its domed and acid-etched glass, is ideal when you need a drive-over luminaire with a broader, softer light than RING and FLAT. The simulations show how the light outlines are soft for all the used light-sources. Using the halogen and fluorescent lamp versions allow you to obtain a lighting effect as far as 4 ÷ 5 meters high.

Using the fluorescent lamp versions MINIBOWL and BOWL we can perfectly light small to medium sized bushes.

QPAR30 75W E27 - 38°

RENDERING - S.4256

a u .

m o c

. e d

a r nt

Using the metal halide lamp versions (HIT-CRI 70W G12) BOWL can light in a uniform way walls 4 ÷ 5 meters high. S.4260 is perfect to lilluminate trees of medium/large heights as far as 6 ÷ 8 meters.

u s . w

TC-T 18W Gx24d-2 - 78°

RENDERING - S.4259

HIT-CRI 70W G12 - 38°

RENDERING - S.4260

BOWL

ÂŽ

DRIVE-OVER

BOWL drive-over withstands vehicle weights up to 2000 kg at a maximum speed of 10 km/h.

There are models available with glass surface temperatures below 75Â°C.

a u .

c . e

r t n

u s . w

The luminaire is housed in a polypropylene/polycarbonate container which can be installed during concrete pouring or asphalting. The container: _ withstands vehicle weights; _ protects the device from direct contact with the ground; _ is easily removed for maintenance.

The container must be installed precisely at ground level. The domed glass is treated with borosilicate, and protrudes 20 mm from the ground (capped models protrude 30 mm).

All BOWL models include a cut-down portion of flexible rubber cable. Electrical connection must take place outside the device. We advise using IP68 fast connector accessory, which is supplied on request.

MINIBOWL

DRIVE-OVER Ø 150 mm -

BOWL

DRIVE-OVER Ø 220 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Toughened acid etched bowl glass. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing tube in polypropylene. Silicone gaskets Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

15 Joule impact.

m o c

Driveover 2000 Kg at 10 Km/h.

. e d

COLOUR: Black

(code 09)

a r nt

u s . w

ACCESSORY IP68 CONNECTING KIT S.4400 Connecting box and resin (suitable for “T” connection).

TOUCH VERSIONS Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor). FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

COLOURED FILTERS FOR MINIBOWL S.4456 S.4457 S.4458 S.4459

Red Blue Yellow Green

COLOURED FILTERS FOR BOWL S.4476 S.4477 S.4478 S.4479 S.4480

Red Blue Yellow Green Anticaloric filter

METAL HALIDE

SODIUM

NOTE: The coloured glass filters can be used only on: T2 6W for MINIBOWL and TC-T 18W and QPAR30 75W for BOWL

BOWL S.4260 and S.4270 HIT-CRI 70W G12 are available on request with sodium lamp HSE 70W E27.

MINIBOWL

DRIVE-OVER Ø 150 mm -

BOWL

DRIVE-OVER Ø 220 mm

MINIBOWL

S.4246 With lamp QPAR20 50W E27 25° Lamp position fixed T 130°C 54°

S.4249

92°

310

Ø 150

With lamp T2 6W Gx53 240V 220 lm Lamp position fixed T 45°C (On request with T2 SOFT LED 1,5W 240V Gx53)

Ø 180

a u .

m o c

. e d

a r nt

BOWL

S.4266

With lamp QPAR30 75W E27 30° Lamp position fixed T 72°C

u s . w 36°

S.4269

w S.4266 S.4269

90°

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 50°C S.4270

S.4270

Ø 220

38°

420

590

Ø 220

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 20° T 120°C

Ø 180

MINIBOWL

DRIVE-OVER Ø 150 mm -

BOWL

DRIVE-OVER Ø 220 mm

MINIBOWL WALL WASHER =12°

S.4236 With lamp QPAR20 50W E27 25° Lamp position fixed tilted 20° T 130°C

C0 27°+28° C90 62°

310

Ø 150

Ø 180

a u .

m o c

a r nt

BOWL WALL WASHER = 12°

. e d

S.4256

With lamp QPAR30 75W E27 30° Lamp position fixed tilted 20° T 72°C

u s . w

C0 16°+18° C90 38°

w S.4256 S.4259

= 20°

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 50°C

C0 27°+32° C90 78° = 4°

S.4260

30 590

C0 15°+18° C90 38°

420

Ø 180

100

Ø 180

S.4260 With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 20° T 120°C

Ø 220

S.4259

a u .

m o c

. e d

a r nt

u s . w

101

a u .

m o c

. e d

a r nt

u s . w

102

RING

a u .

m o c

. e d

a r nt

u s . w

103

RING

DRIVE-OVER

RING is a range of drive-over inground fittings IP67. The stainless steel trim makes them suitable in particular for aggressive environments such as gardens and areas near the sea. In the simulations you can see the different light distributions obtained with a MEGARING with metal halide lamp using different reflectors. You can get an uniform lighting using products with an asymmetric optic or you can create very marked effects using 14° or 7° narrow optics.

HIT-DE 150W Rx7s

Simulation with MEGARING S.4934 150W - ASYMMETRIC

HIT-CRI 70W G12 - 14°

a u .

Simulation with MEGARING S.4930 70W - 14°

m o c

. e d

a r nt

MINIRING with SOFT LED 240V is ideal in public places where is required a drive-over luminaire.

HIT-CRI 70W G12 - 7°

104

u s . w

Simulation with MEGARING S.4930 70W - 7°

RING

DRIVE-OVER

RING drive over is suitable for applications requiring a stainless steel finish. The RING DRIVE-OVER withstand maximum vehicle weights of 4000 Kg at a maximum speed of 30 km/h. Durable RING has glass thicknesses from 15 to 19 mm and is shock resistant to 25 joules.

There are models available with glass surface temperatures below 75° C.

a u .

c . e

d a r t n

u s . w

The 3 mm-thick steel ring is thicker than the container-wall. Its 8 mm protuberance is sufficient to cover any imperfections in the holes in the floor.

The luminaire is housed in a polypropylene/polycarbonate container which can be installed during concrete pouring or asphalting. The container: _ protects the luminaire from direct contact with the ground; _ withstands vehicle weights; _ is easily removed for maintenance.

Every RING model is supplied with rubber cable. Available on request is IP68 rapid connector accessory for power hook-ups that must be positioned inside the recessing box. It’s also possible to make through wiring with rapid T connectors.

105

MINIRING DRIVE-OVER Ø 165 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 front trim 3 mm thick. Toughened glass 15 mm thick. Stainless steel screws. Internal antiglare grille in die-cast alumimium for clear glass versions. Luminaire hard wired with rubber cable. Recessing tube in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

25 Joule impact.

m o c

Driveover 4000 Kg at 30 Km/h.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

u s . w

TOUCH VERSIONS

ACCESSORY IP68 CONNECTING KIT S.4400

SPECIAL VERSION On request all versions of MINIRING can be supplied with square front trim in stainless-steel with round optic. Dimensions: 165 x 165 mm

Connecting box and resin (suitable for “T” connection). FAST CONNECTOR ACCESSORY S.5502

COLOURED GLASS FILTERS S.4456 Red S.4457 Blue S.4458 Yellow S.4459 Green NOTE: The coloured filters can be used on T2 6W version only.

Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

DMX 512

MINIRING with LED RGB 240V has a transformer and DMX signal converter already included. With a DMX switchboard you can control more fittings, completely controlling scenes, speeds and colour sequences. In stand-alone mode (without DMX entry), a pre-programmed colour-changing sequence is activated. Several devices connected to the same electric line, without a DMX switchboard, function with a pre-programmed colour-changing sequence, but in unsynchronized mode. EASY DMX SWITCHBOARD S.5721 DMX programmable elementary switchboard allows to control of only 6 groups of devices, each containing about 20 devices. You can purchase on the market professional DMX switchboards that permit control of up to 170 groups of devices, each containing about 20 devices.

106

DALI

MINIRING LED RGB DALI Upon request we can furnish MINIRING with LED RGB 240V with transformer and DALI signal converter already included.

MINIRING DRIVE-OVER Ø 165 mm

CLEAR GLASS

S.4913.19 With lamp QPAR20 50W E27 25° Lamp position fixed T 155°C 24°

S.4910.19

10°

h(m) 5 4 3 2 1

With RGB ACCENT LED 3x1W 350 mA (1 red, 1 green, 1 blue) With transformer 240V÷350 mA and signal converter for DMX. T 33°C

0.1 m

E(lx) 10° 1 1 3 8 21 0 (m)

S.4900.19 With ACCENT WHITE LED 3x1W 240V T 33°C S.4902.19 With ACCENT BLUE LED 3x1W 240V T 33°C LED RED, LED AMBER and LED GREEN

a u .

versions available on request

m o c

. e d

a r nt

ACID-ETCHED GLASS

S.4914.19

With lamp QPAR20 50W E27 25° Lamp position fixed T 155°C

u s . w 58°

S.4919.19

88°

With lamp T2 6W Gx53 220 lm Lamp position fixed T 31°C

S.4905.19 With SOFT WHITE LED 1,5W 240V T 31°C

90°

S.4907.19 With SOFT BLUE LED 1,5W 240V T 31°C Versions with SOFT LED RED, LED AMBER and LED GREEN lamps available on request

107

RING

DRIVE-OVER Ø 235 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 front trim 3 mm thick. 99.98% pure aluminium reflectors. Toughened glass 19 mm thick. Internal antiglare grid in die-cast alumimium for clear glass versions. Stainless steel screws. Luminaire hard wired with rubber cable. Recessing tube in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

25 Joule impact.

m o c

Driveover 4000 Kg at 30 Km/h.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

u s . w

TOUCH VERSIONS Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor). ELLIPSOIDAL BEAM LENS S.4473 Must be installed under the front glass. Use only for HIT-CRI 35W 12°, HIT-CRI 70W 12° and QPAR30 75W 10°. COLOURED GLASS FILTERS S.4476 Red S.4477 Blue S.4478 Yellow S.4479 Green S.4480 Anticaloric filter NOTE: The filters can be used on HIT-CRI 35W, TC-T 18W and QPAR30 75W COOL BEAM versions only.

SPECIAL VERSION On request all versions of RING can be supplied with squared front trim in stainless-steel with round optic. Dimensions: 235 x 235 mm METAL HALIDE

SODIUM

On request RING art. S.4921.19 and S.4922.19 HIT-CRI 70W G12 are available for sodium lamp HSE 70W E27.

108

RING

DRIVE-OVER Ø 235 mm

CLEAR GLASS

S.4920.19

12°

With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 20° T 75°C S.4921.19

12° S.4920.19 S.4921.19

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 20° T 120°C S.4923.19

S.4923.19 S.4928.19

28°

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 20° (On request lamp with 10° beam) T 107°C S.4928.19

86°

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 55°C

a u .

m o c

a r nt

ACID-ETCHED GLASS

S.4922.19

S.4924.19

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 20° T 120°C

u s . w 38°

S.4922.19 S.4925.19

. e d

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 20° T 107°C

46° S.4925.19

S.4924.19 S.4929.19

38°

With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 20° T 75°C S.4929.19

96°

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 55°C

109

MEGARING

DRIVE-OVER Ø 315 mm



a u .

25 Joule impact.

m o c

Driveover 4000 Kg at 30 Km/h.

. e d

FINISHING: Stainless steel

(code 19)

a r nt

u s . w

ACCESSORY IP68 CONNECTING KIT S.4400 Connecting box and resin (suitable for “T” connection). FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box. S.5500 ANTIGLARE SHIELD To be used only for HIT-CRI 7°/8° versions.

TOUCH VERSIONS Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor). S.4973 ELLIPSOIDAL BEAM LENS Must be installed under the front glass. Use only with 7°/8° narrow beam reflectors. COLOURED GLASS FILTERS S.4976 Red S.4977 Blue S.4978 Yellow S.4979 Green S.4980 Anticaloric filter NOTE: The filters can be used on HIT-CRI 70W version only.

SPECIAL VERSION On request all versions of MEGARING can be supplied with squared front trim in stainless-steel with round optic. Dimensions: 315 x 315 mm

110

MEGARING

DRIVE-OVER Ø 315 mm

CLEAR GLASS

S.4930.19

14°

16°

h(m) 25 20 15 10 5

17546 cd/klm 2293 cd/klm

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request 7° narrow beam reflector) T 95°C (with anticaloric filter 70°C ) 7°

14°

S.4931.19

12850 cd/klm 2141 cd/klm

With lamp HIT-CRI 150W G12 14000 lm Lamp position adjustable ± 15° (On request 8° narrow beam reflector) T 130°C

8°

0.2 m h(m) 25 20 15 10 5

16°

0.2 m

E(lx) 7° 2 4 10 28 101 0 (m) E(lx) 8° 3 6 14 42 190 0 (m)

E(lx) 14° 0 1 1 4 28 0 (m) E(lx) 16° 1 1 2 8 54 0 (m)

S.4934.19

= 0°

C0 15°+47° C90 56°

With lamp HIT-DE 150W Rx7s 13250 lm Lamp position fixed T 128°C (On request with sodium lamp)

a u .

ACID-ETCHED GLASS

m o c

S.4932.19

44°

With lamp HIT-CRI 150W G12 14000 lm Lamp position abjustable ± 15° T 130°C

a r nt

S.4935.19

With lamp HIT-CRI 70W G12 6600 lm Lamp position abjustable ± 15° T 95°C (with anticaloric filter 70°C

u s . w 44°

. e d

)

w METAL HALIDE

SODIUM

Art. S.4934.19 with HIT-DE 150W Rx7s metal halide lamp, on request, is available with HST-DE 150W Rx7s sodium lamp, working with the same gear.

WIDE BEAM REFLECTOR

NARROW BEAM REFLECTOR

Luminaires with 14°/16° wide beam reflectors are available on request with narrow beam reflectors. (HIT-CRI 70W - 7°) (HIT-CRI 150W - 8°)

111

a u .

m o c

. e d

a r nt

u s . w

112

a u .

m o c

. e d

a r nt

u s . w

CASTEL JALPI’ - Barcelona (Spain)

113

a u .

m o c

. e d

a r nt

u s . w

114

FLAT

a u .

m o c

. e d

a r nt

u s . w

115

FLAT

DRIVE-OVER

FLAT range has a wide variety of optics. It is possible to achieve different light effects with a metal halide lamp 70W. You can get an uniform illumination using FLAT with asymmetric optic or create very marked accents using 16° to 7° narrow beam reflectors. This versatility allows you to provide different lighting solutions using the same product range. Applying different effects on the same wall the building seems to have different dimensions, according to the kinds of light: it seems larger and shorter with an uniform illumination, obtained using an asymmetric reflector, than when you use 14°, 12° or 7° narrow optics.

HIT-DE 70W Rx7s

HIT-CRI 70W G12 - 14°

Simulation with S.4724 70W – asymmetric

Simulation with S.4789 70W - 14°

m o c

. e d

a r nt

u s . w

HIT-CRI 70W G12 - 12°

Simulation with S.4470 70W - 12°

HIT-CRI 70W G12 - 7°

116

a u .

Simulation with S.4789 70W - 7°

FLAT

DRIVE-OVER

FLAT is a durable, impact-resistant drive-over luminaire that is flush with the ground. Consider FLAT for projects requiring absolutely flush drive-over luminaires. Being level with the ground, the luminaires easily endure vehicle impact; however, we advise keeping speeds to a maximum of 30 km/h as a precaution.

The FLAT product line includes models with glass surface temperatures under 75°C.

a u .

c . e

It’s crucial that the upper edge of the luminaire doesn’t extend out from the ground, but that both the round and square models remain level.

d a r t n

u s . w

The device is housed in a polypropylene/polycarbonate container which can be installed during concrete-pouring or asphalting. The container: _ withstands vehicle weights; _ protects the luminaire from direct contact with the ground; _ is easily removed for maintenance.

Every FLAT model is supplied with rubber cables. Fast connector accessory IP68 is available upon request. Connections must be made inside the recessing box.

117

MINIFLAT DRIVE-OVER Ø 150 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Toughened glass 12 mm thick. Stainless steel screws. Internal antiglare grid in die-cast alumimium. Luminaire hard wired with rubber cable. Recessing tube in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

25 Joule impact.

m o c

Driveover 3500 Kg. at 30 Km/h.

. e d

COLOUR: Black

(code 09)

a r nt

Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

u s . w

TOUCH VERSIONS

ACCESSORY IP68 CONNECTING KIT S.4400

S.4452 WIDE BEAM LENS ACID ETCHED GLASS To be installed under the front glass.

Connecting box and resin (suitable for “T” connection). FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

DMX 512

MINIFLAT with LED RGB 240V has a transformer and DMX signal converter already included. With a DMX switchboard you can control more fittings, completely controlling scenes, speeds and colour sequences. In stand-alone mode (without DMX entry), a pre-programmed colour-changing sequence is activated. Several devices connected to the same electric line, without a DMX switchboard, function with a pre-programmed colour-changing sequence, but in unsynchronized mode. EASY DMX SWITCHBOARD S.5721 DMX programmable elementary switchboard allows to control of only 6 groups of devices, each containing about 20 devices. You can purchase on the market professional DMX switchboards that permit control of up to 170 groups of devices, each containing about 20 devices.

118

DALI

MINIFLAT LED RGB DALI Upon request we can furnish MINIFLAT with LED RGB 240V with transformer and DALI signal converter already included.

MINIFLAT DRIVE-OVER Ø 150 mm

S.4446 With lamp QPAR20 50W E27 25° Lamp position fixed T 155°C 26°

S.4448

36°

With lamp QR-CBC 51 35W 12V GU5,3 Lamp position adjustable ± 30° With transformer 40VA 240V÷12V T 120°C S.4410

10°

With RGB ACCENT LED 3x1W 350 mA (1 red, 1 green, 1 blue) With transformer 240V÷350mA and signal converter for DMX. T 33°C

h(m) 5 4 3 2 1 0.1 m

E(lx) 10° 1 1 3 8 21 0 (m)

S.4405 With ACCENT WHITE LED 3x1W 240V T 33°C

a u .

S.4407 With ACCENT BLUE LED 3x1W 240V T 33°C

m o c

LED RED, LED AMBER and LED GREEN

. e d

versions available on request

a r nt

u s . w

119

FLAT

DRIVE-OVER Ø 220 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Toughened glass 15 mm thick. 99.98% pure aluminium reflectors. Stainless steel screws. Internal antiglare grid in die-cast alumimium. Luminaire hard wired with rubber cable. Recessing tube in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

25 Joule impact.

m o c

Driveover 3500 Kg. at 30 Km/h.

. e d

COLOUR: Black

(code 09)

a r nt

u s . w

TOUCH VERSIONS Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

ACCESSORY IP68 CONNECTING KIT S.4400 Connecting box and resin (suitable for “T” connection). FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box. SPECIAL VERSION NON SLIP GLASS On request all versions of FLAT can be supplied with non slip glass. It modifies the standard beam. S.4472

COLOURED GLASS FILTERS

WIDE BEAM LENS ACID ETCHED GLASS To be installed under the front glass. It enlarges the standard beam.

S.4476 S.4477 S.4478 S.4479 S.4480

S.4473 ELLIPSOIDAL BEAM LENS To be installed under the front glass. Use only for HIT-CRI 35W 12° and QPAR30 75W 10°.

120

Red Blue Yellow Green Anticaloric filter

NOTE: The filters can be used on TC-T 18W , HIT-CRI 35W and QPAR30 75W COOL BEAM versions only.

FLAT

DRIVE-OVER Ø 220 mm

S.4464

12°

With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 20° T 75°C S.4466

28° S.4464 S.4470

With lamp QPAR30 75W E27 30° Lamp position adjustable ± 20° (On request lamp with 10° beam) T 107°C S.4469

S.4466 S.4469

86°

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed T 55°C S.4470

12°

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 20° T 120°C

a u .

m o c

. e d

a r nt

u s . w

METAL HALIDE

SODIUM

On request FLAT art. S.4470 HIT-CRI 70W G12 is available for sodium lamp HSE 70W E27.

121

MEGAFLAT ROUND

DRIVE-OVER Ø 300 mm



a u .

20 Joule impact.

m o c

Driveover 3000 Kg. at 30 Km/h.

. e d

COLOUR: Black

(code 09)

a r nt

u s . w

TOUCH VERSIONS Fittings with this symbol have a glass surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

S.4972

COLOURED GLASS FILTERS

WIDE BEAM LENS ACID ETCHED GLASS To be installed under the front glass.

S.4976 Red S.4977 Blue S.4978 Yellow S.4979 Green S.4980 Anticaloric filter

S.4973 ELLIPSOIDAL BEAM LENS To be installed under the front glass. Use with 7°/8° narrow beam reflectors.

122

NOTE: The filters can be used on HIT-CRI 70W version only.

MEGAFLAT ROUND

DRIVE-OVER Ø 300 mm

S.4788

= 0°

C0 15°+47° C90 56°

With lamp HIT-DE 150W Rx7s 13250 lm Lamp position fixed T 128°C (On request with sodium lamp) S.4789

14°

16°

h(m) 25 20 15 10 5

17546 cd/klm 2293 cd/klm

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with 7° beam reflector) T 95°C (with anticaloric filter 70°C

)

7°

14°

S.4790

12850 cd/klm 2141 cd/klm

With lamp HIT-CRI 150W G12 14000 lm Lamp position adjustable ± 15° (On request with 8° beam reflector) T 130°C

8°

0.2 m h(m) 25 20 15 10 5

16°

0.2 m

E(lx) 7° 2 4 10 28 101 0 (m) E(lx) 8° 3 6 14 42 190 0 (m)

E(lx) 14° 0 1 1 4 28 0 (m) E(lx) 16° 1 1 2 8 54 0 (m)

a u .

METAL HALIDE

WIDE BEAM REFLECTOR

SODIUM

Art. S.4788 with HIT-DE 150W Rx7s metal halide lamp, on request, is available with HST-DE 150W Rx7s sodium lamp, working with the same gear.

NARROW BEAM REFLECTOR

m o c

. e d

a r nt

u s . w

Luminaires with 14°/16° wide beam reflectors are available on request with narrow beam reflectors. (HIT-CRI 70W - 7°) (HIT-CRI 150W - 8°)

123

FLAT SQUARE

DRIVE-OVER

310 mm

260 mm /

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. 99.5% pure aluminium reflectors. Toughened glass 15 mm thick. Stainless steel screws. Double cable entries with PG13,5 cable glands for FLAT SQUARE. MEGAFLAT SQUARE are hard wired with rubber cable. Recessing tube in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

25 Joule impact.

m o c

Driveover 2000 Kg. at 30 Km/h.

. e d

COLOUR: Black

(code 09)

a r nt

u s . w

ACCESSORY IP68 CONNECTING KIT (FOR MEGAFLAT SQUARE S.4400

310 mm)

Connecting box and resin (suitable for “T” connection). FAST CONNECTOR ACCESSORY 310 mm (FOR MEGAFLAT SQUARE S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box.

METAL HALIDE

SODIUM

On request S.4724, S.4728, S.4729 with metal halide lamps HIT-DE are available with sodium lamps HST-DE working with the same gears.

124

FLAT SQUARE

DRIVE-OVER

260 mm /

310 mm

260 mm =17°

C0 25°+32° C90 60°

MEGAFLAT SQUARE

S.4724 With lamp HIT-DE 70W Rx7s 6500 lm Lamp position fixed T 119°C (On request with sodium lamp)

a u .

310 mm =14°

C0 20°+25° C90 66°

With lamp HIT-DE 150W Rx7s 13250 lm Lamp position fixed T 117°C (On request with sodium lamp)

. e d

a r nt

S.4729 = 22°

m o c

S.4728

With lamp HIT-DE 250W Fc2 20000 lm Lamp position fixed T 126°C (On request with sodium lamp)

u s . w C0 25°+26° C90 62°

125

a u .

m o c

. e d

a r nt

u s . w

126

a u .

m o c

. e d

a r nt

u s . w

MILLENIUM FITNESS CENTRE - Brescia (Italy)

127

a u .

m o c

. e d

a r nt

u s . w

128

PRADO

a u .

m o c

. e d

a r nt

u s . w

129

PRADO

The simulation shows how PRADO beam angles are mainly wide, they are suitable for lighting trees because they stress the shape of the trees. It is very important to consider the colour of the trees, that is why we offer products with the main existing lighting sources: halogen, fluorescent and metal halide.

The fluorescent and halogen versions are suitable for the lighting of trees, schrubs, small and medium bushes. You can get very visible effects up to 3÷5 meters.

S.4439

TC-T 26W Gx24d-3 - 106°

a u .

m o c

. e d

a r nt

The metal halide version is suitable for medium and big trees. You can get very visible effects up to 7÷8 meters.

u s . w

QPAR30 75W E27 - 28°

HIT-CRI 70W G12 - 16°

130

S.4436

S.4440

PRADO

PRADO DRIVE-OVER withstands weights of 1000 kg at maximum speeds of 10 km/h.

The cap’s surface temperature is less than 55°C.

a u .

c . e

The die cast aluminum cap is designed to absorb vehicle impact. The edge of the hole is covered for recessing.

d a r t n

u s . w

The luminaire is housed in a polypropylene/polycarbonate container which can be installed during concrete-pouring or asphalting. The container: _ withstands vehicle weights; _ protects the luminaire from direct contact with the ground; _ is easily removed for maintenance.

A cut-down portion of flexible rubber cable is included with every PRADO model. Electrical connection must take place outside the device. We advise using IP68 fast connector accessory, which is supplied on request.

131

PRADO BURIED UPLIGHT and DRIVE-OVER

Ø 210 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Toughened pressed glass for PRADO BURIED. Polycarbonate vandalproof diffuser for PRADO DRIVE-OVER. 99.98% pure aluminium reflectors. Stainless steel screws. Protective front grill in die-cast aluminium for PRADO BURIED. Protective guard of 6 mm thickness for PRADO DRIVE-OVER. Luminaire hard wired with rubber cable. Recessing tube in polypropylene. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP67 CLASS I



a u .

m o c

25 Joule impact only for PRADO DRIVE-OVER.

. e d

Driveover 1000 Kg at 10 km/h for PRADO DRIVE-OVER only.

a r nt

u s . w

ACCESSORY IP68 CONNECTING KIT S.4400 Connecting box and resin (suitable for “T” connection). FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box. COLOURED GLASS FILTERS S.4476 Red S.4477 Blue S.4478 Yellow S.4479 Green NOTE: The coloured filters can be used only on PRADO BURIED UPLIGHT, TC-T 26W version.

132

TOUCH VERSIONS Fittings with this symbol have a surface temperature T<75°C. (Values measured at 15°C ambient temperature for outdoor).

PRADO BURIED UPLIGHT and DRIVE-OVER

Ø 210 mm

PRADO BURIED

S.4436 With lamp QPAR30 75W E27 30° Lamp position fixed T 100°C C0 26°

C90 28°

S.4439 With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed T 47°C C0 60°

C90 106°

S.4440

S.4436

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 20° T 72°C C0 12°

C90 16°

COLOURS:

S.4439

Black

(code 09)

a u .

m o c

S.4440

. e d

a r nt

u s . w

w PRADO DRIVE-OVER

S.4419 With lamp TC-D 10W G24d-1 600 lm Lamp position fixed T 55°C COLOURS: Aluminium grey (code 14)

133

PRADO

WALL RECESSED Ø 210 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Toughened pressed glass. Stainless steel screws. Recessing tube in polypropylene. Silicone gaskets. Double cable entries. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS I



a u .

m o c

. e d

COLOUR: Black

(code 09)

a r nt

The recessing box in polypropylene must be perfectly installed at the wall level.

u s . w

134

COLOURED GLASS FILTERS S.4476 Red S.4477 Blue S.4478 Yellow S.4479 Green

PRADO

WALL RECESSED Ø 210 mm

PRADO WALL RECESSED

S.4429

H = 0.2 m

With lamp TC-D 10W G24d-1 600 lm Lamp position fixed

lux

C0 66° C90 96°

a u .

m o c

. e d

a r nt

u s . w

135

a u .

m o c

. e d

a r nt

u s . w

136

a u .

m o c

. e d

a r nt

u s . w

NINE BRIDGE GOLF RESORT - South Jeju-gun, Jeju Island (South Korea)

137

a u .

m o c

. e d

a r nt

u s . w

138

MICROPLUG

a u .

m o c

. e d

a r nt

u s . w

139

MICROPLUG

速

The MICROPLUG line features the latest generation of SOFT LED for diffuse indication lighting. It can be used in existing buildings too, due to the possibility to be installed in standard switch boxes.

a u .

m o c

. e d

a r nt

u s . w

140

MICROPLUG

ÂŽ

The protruding models feature a unique lighting effect: if observed from the side, it is translucent. As the angle of vision changes, moving toward the front, the diffuser becomes gradually lit on the outside surface, allowing a complete view of the light when the observer is perpendicular to the front.

Recessed in the wall, MICROPLUG functions with switch boxes and sockets in civil environments: _ round switch boxes; _ square switch boxes; _ rectangular switch boxes TYPE 503. MICROPLUG comes with a polypropylene recessing box that should be installed flush to the wall.

a u .

c . e

MICROPLUG also comes with CLIP for plaster board walls or ceiling panels.

d a r t n

u s . w

The frontal trim is made of AISI316 stainless steel. Its clip fastening system, which keeps screws invisible on the assembled luminaire, enhances the productâ&#x20AC;&#x2122;s minimalist design.

141

MICROPLUG

Stainless steel AISI316 front trim 3 mm thick. Zinc alloy back-ring. Polycarbonate housing. Methacrylate diffuser. Luminaire supplied with cable, connector and heat resistant sheaths. Recessing boxes for wall recessing included. L.E.D circuit included. GLOW WIRE: 960°C for FLAT DIFFUSER 650°C for PROJECTED DIFFUSER IP65 CLASS II



12 Joule impact.

a u .

m o c

. e d

FINISHING: Stainless steel

(code 19)

a r nt

Luminaire supplied with cable. Wiring must be done outside the fitting.

u s . w

240V

MICROPLUG 240V LED circuits works with the mains voltage 230V/240V 50/60Hz. (24V D.C. LED circuits available on request)

All MICROPLUG luminaires are supplied with two clips which allow an easy installation for floating walls and ceiling mounting. NOTE: Wall thickness must be between 5 and 20 mm. MICROPLUG ROUND MICROPLUG SQUARE MICROPLUG RECTANGULAR

hole Ø 60 mm hole 60 mm hole 57 x 94 mm

MICROPLUG FLAT DIFFUSER

MICROPLUG PROJECTED DIFFUSER

142

MICROPLUG-LED

FLAT DIFFUSER

240V FLAT DIFFUSER

S.4570.19 With SOFT WHITE LED 1,5W 240V S.4571.19 With SOFT BLUE LED 1,5W 240V

1 cd/klm

LED RED, LED AMBER and LED GREEN versions available on request Supplied with round electrical box for wall recessing 60 3

Ø80

Ø40

FLAT DIFFUSER

a u .

m o c

S.4580.19 With SOFT WHITE LED 1,5W 240V

. e d

S.4581.19

With SOFT BLUE LED 1,5W 240V

a r nt

1 cd/klm

LED RED, LED AMBER and LED GREEN versions available on request

u s . w

Supplied with square electrical box for wall recessing

50 3

w 40

FLAT DIFFUSER

S.4590.19 With SOFT WHITE LED 1,5W 240V S.4591.19 With SOFT BLUE LED 1,5W 240V

1 cd/klm

LED RED, LED AMBER and LED GREEN versions available on request Supplied with rectangular electrical box TYPE 503 for wall recessing 116

50 3

143

MICROPLUG-LED

240V PROJECTED DIFFUSER

PROJECTED DIFFUSER

S.4572.19 With SOFT WHITE LED 1,5W 240V S.4574.19 With SOFT BLUE LED 1,5W 240V

1 cd/klm

LED RED, LED AMBER and LED GREEN versions available on request Supplied with round electrical box for wall recessing 60

Ø80

Ø40

PROJECTED DIFFUSER

a u .

m o c

S.4582.19 With SOFT WHITE LED 1,5W 240V

. e d

S.4584.19

With SOFT BLUE LED 1,5W 240V

a r nt

1 cd/klm

LED RED, LED AMBER and LED GREEN versions available on request

u s . w

Supplied with square electrical box for wall recessing

50 15

PROJECTED DIFFUSER

S.4592.19 With SOFT WHITE LED 1,5W 240V S.4594.19 With SOFT BLUE LED 1,5W 240V LED RED, LED AMBER and LED GREEN versions available on request Supplied with rectangular electrical box TYPE 503 for wall recessing

116

50 15

144

1 cd/klm

a u .

m o c

. e d

a r nt

u s . w

145

a u .

m o c

. e d

a r nt

u s . w

146

RIGHELLO

a u .

m o c

. e d

a r nt

u s . w

147

RIGHELLO

速

The RIGHELLO line features the latest generation of SOFT LED for diffuse indication lighting. RGB version is available for dynamic lighting effects.

a u .

m o c

. e d

a r nt

u s . w

148

RIGHELLO

ÂŽ

RIGHELLO is an innovative wall-recessed luminaire that makes use of SOFT LED. The protruding models feature special light effects: If observed from the side, the diffuser becomes lit on the outside surface, and remains lit up to a frontal view.

RIGHELLO comes with a polypropylene recessing box that should be installed flush to the wall.

a u .

c . e

RIGHELLO also comes with CLIP for plaster board walls or ceiling panels.

d a r t n

u s . w

The frontal trim is made of AISI316 stainless steel. Its clip fastening system, which keeps screws invisible on the assembled luminaire, enhances the productâ&#x20AC;&#x2122;s minimalist design.

149

RIGHELLO

Stainless steel AISI316 front trim 3 mm thick. Zinc alloy back-ring. Polycarbonate housing. Methacrylate diffuser. Luminaire supplied with cable. Recessing boxes for wall recessing included. L.E.D circuit included. GLOW WIRE: 650°C IP65 CLASS II (CLASS III

 for RGB LED versions)



12 Joule impact.

a u .

m o c

. e d

FINISHING: Stainless steel

(code 19)

a r nt

u s . w

Luminaire supplied with cable. Wiring must be done outside the fitting. WHITE LED and BLUE LED versions work with the mains voltage 230V/240V 50Hz/60Hz. RGB LED versions work with 24V and need remote controller and power supply.

All RIGHELLO luminaires are supplied with two clips which allow an easy installation for floating walls and ceiling mounting. NOTE: Wall thickness must be between 5 and 30 mm. RIGHELLO SHORT RIGHELLO LONG

hole hole

226 x 36 mm 356 x 36 mm

FAST CONNECTOR ACCESSORY S.5502 Fast connector M20 (Ø 5÷14 mm) IP68 for single through wiring. To be placed inside the recessing box. RGB POWER SUPPLY S.4500

RGB POWER SUPPLY IN BOX IP55 S.4501

RGB POWER SUPPLY IP20 8W per channel (3x8W) programmable and controllable according to DALI RGB standards. In stand-alone mode (without DALI entry) a pre-programmed sequence is activated. (Switchboard for DALI RGB management available on request). In: 240V A. C. Out: 24V D. C. Dimensions: 165 x 40 x 30 mm.

BOX IP55 WITH RGB POWER SUPPLY 8W per channel (3x8W) (RGB power supply S.4500 included)

S.4500 can control: - from 1 to 6 luminaires S.4510.19 (electrical input: 1,2W per channel x 6 fittings = 7,2W per channel) - from 1 to 3 luminaires S.4520.19 (electrical input: 2,4W per channel x 3 fittings = 7,2W per channel)

150

Dimensions: In: Out: IP55 CLASS

200 x 200 x 90 mm. N°4 PG11 cable glands N°6 PG11 cable glands II 

RIGHELLO

速

PROJECTED DIFFUSER

S.4510.19 With RGB LED 24V 1,2W per channel (3 x 1,2W) (RGB DALI power supply and controller separate)

4 cd/klm

S.4512.19 With SOFT WHITE LED 1,5W 240V S.4514.19 With SOFT BLUE LED 1,5W 240V LED RED, LED AMBER and LED GREEN 240

versions available on request 45

177

a u .

m o c

. e d

a r nt

PROJECTED DIFFUSER

S.4520.19

With RGB LED 24V 2,4W per channel (3 x 2,4W) (RGB DALI power supply and controller separate)

u s . w

4 cd/klm

S.4522.19 With SOFT WHITE LED 3W 240V

S.4524.19 With SOFT BLUE LED 3W 240V LED RED, LED AMBER and LED GREEN

370

307

versions available on request 45

151

a u .

m o c

. e d

a r nt

u s . w

152

a u .

m o c

. e d

a r nt

u s . w

ANILU’ CAFE’ - Brescia (Italy)

153

a u .

m o c

. e d

a r nt

u s . w

EOS

154

a u .

m o c

. e d

a r nt

u s . w

155

EOS

速

EOS, with its linear shape, is the wall recessed solution for projects requiring attractiveness and lighting with maximum visual comfort. EOS is a wall recessed fitting designed to have a downward light distribution. The concealed horizontal glass diffuser has an optimum vandal resistance. EOS is offered in 5 sizes with various lamps sources. Although the design of EOS allows indirect illumination, choosing different powers you can have soft light or accent lighting too.

QT9 20W 12V G4

RENDERING - S.4624 - MINIEOS 20W 12V QT9

a u .

m o c

. e d

a r nt

u s . w

TC-D 18W G24d-2

RENDERING - S.4609 - EOS SQUARE TC-D 18W

TC-D 26W G24d-3

156

RENDERING - S.4619 - EOS RECTANGULAR TC-D 26W

EOS

速

Installation is simple with polypropylene recessing box. Appropriate plastic supports reinforce the centre of the structure. This strategy prevents buckling during the concrete wall construction phase.

The luminaires are fixed in the recessing box by stainless steel screws.

a u .

c . e

The glass diffuser is siliconed directly in the cover. The glass is safely protected against blows or vandalism.

d a r t n

u s . w

The cover hides the recessing box edge, holes and other wall imperfections.

157

MINIEOS SQUARE

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Opal toughened glass diffuser. Stainless steel screws. Single cable entry. Dutral gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP54 CLASS I for LED 240V versions CLASS III

 for 12V versions



a u .

m o c

. e d

COLOURS: Black

(code 09)

Aluminium grey (code 14)

a r nt

Luminaire supplied with recessing box in polypropylene, which must be perfectly installed at the wall level.

u s . w

240V

158

MINIEOS SQUARE FOR 20W 12V Use a remote transformer 240V÷12V placed at the beginning of the supply line.

MINIEOS SQUARE LED Luminaire supplied with electronic ballast 350 mA ÷ 240V placed inside the fitting. It must be supplied with main voltage 240V.

The light distribution is in accordance with light pollution regulations.

MINIEOS SQUARE

速

MINIEOS SQUARE LED

S.4620

H=0.1 m

With 1 WHITE LED smd 1.5W 240V Recessing box included

lux

S.4622

7 cd/klm

With 1 BLUE LED smd 1.5W 240V Recessing box included LED RED, LED AMBER and LED GREEN versions available on request

a u .

MINIEOS SQUARE

S.4624 For lamp QT9 20W 12V G4 330 lm Recessing box included (Without transformer)

d a r t n

c . e

H=0.1 m

lux

u s . w

159

EOS

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Opal toughened glass diffuser. Stainless steel screws Double cable entries. Dutral gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS I



a u .

m o c

. e d

COLOURS: Black

(code 09)

Aluminium grey (code 14)

a r nt

The light distribution is in accordance with light pollution regulations.

S.4350

u s . w

EOS BOLLARD ACCESSORY

Die-cast aluminium column. Base 240 x 160 mm H = 550 mm (Order luminaire EOS SQUARE separately)

RECESSING BOX

All EOS WALL RECESSED luminaires must be installed with the recessing box.

Recessing box must be perfectly installed at the wall level.

ACCESSORY FLANGE FOR EOS BOLLARD

150

230

S.4372 Flange in steel with screws in stainless steel (to be fixed in concrete).

METAL HALIDE

SODIUM

On S.4640 and S.4641 you can use a metal halide lamp HIT-DE, as well as a high pressure sodium lamp HST-DE, working with the same gear.

160

EOS

速

EOS SQUARE

S.4608

H = 0.5 m lux

For lamp HIT-TC CRI 35W G8,5 3300 lm With electronic ballast Recessing box not included

133 cd/klm

S.4609

H = 0.5 m

For lamp TC-D 18W G24d-2 1200 lm Recessing box not included

lux

92 cd/klm

S.4343 228

RECESSING BOX for EOS SQUARE 217 x 187 mm. Width 100 mm.

198

99 19

a u .

m o c

. e d

a r nt

MEGAEOS SQUARE

u s . w

S.4639

H = 0.8 m lux

For lamp TC-F 36W 2G10 2800 lm Recessing box not included IP55 S.4640

H = 0.8 m

For lamp HIT-DE 70W Rx7s 6500 lm Recessing box not included IP55 S.4641

lux

H = 0.8 m

lux

For lamp HIT-DE 150W Rx7s 13250 lm Recessing box not included IP55

S.4633.12 RECESSING BOX for MEGAEOS SQUARE 290 x 290 mm. Width 155 mm.

161

EOS

速

MINIEOS RECTANGULAR

S.4625

H = 0.5 m lux

For lamp QT14 25W 240V G9 260 lm Recessing box not included 158 cd/klm

S.4629

H = 0.5 m

For lamp TC-D 10W G24d-1 600 lm (Use only OSRAM lamps made in EUROPE) Recessing box not included

lux

S.4623 RECESSING BOX for MINIEOS RECTANGULAR 145 x 90 mm. Width 140 mm.

a u .

EOS RECTANGULAR

S.4615

H = 0.3 m

With ACCENT WHITE LED 6W 240V 350mA Recessing box not included

c . e

S.4617

r t n

With ACCENT BLUE LED 6W 240V 350mA Recessing box not included

u s . w

lux

18 cd/klm

LED RED, LED AMBER and LED GREEN versions available on request

S.4619 For lamp TC-D 26W G24d-3 1800 lm Recessing box not included

S.4523 RECESSING BOX for EOS RECTANGULAR 263 x 135 mm. Width 95 mm.

162

H = 0.5 m

lux

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

164

STRIP

a u .

m o c

. e d

a r nt

u s . w

165

STRIP

速

In the simulations we illuminated a 6 m alley with STRIP SQUARE 18W and STRIP RECTANGULAR 26W with 4 m spacing between luminaires and mounted at 40 cm from ground level.

TC-D 18W G24d-2

The light emission of STRIP is downwards. These products are suitable for the lighting of alleyways and stairways.

SIMULATION - STRIP SQUARE 18W

a u .

m o c

. e d

a r nt

u s . w

TC-D 26W G24d-3

166

SIMULATION - STRIP RECTANGULAR 26W

STRIP

速

Installation is easy, thanks to the polypropylene recessing box.

The luminaires are fixed in the recessing box by stainless steel screws.

a u .

c . e

The glass diffuser is affixed directly onto the cover with silicone.

d a r t n

u s . w

The cover disguises the recessing box edge, so holes and any wall imperfections are invisible.

167

STRIP

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Opal toughened glass diffuser. Stainless steel screws. Double cable entries. Dutral gaskets. Powdered paint with high corrosion resistance. Lamp not included.

IP55 CLASS I



a u .

m o c

. e d

COLOURS: Black

(code 09)

Aluminium grey (code 14)

a r nt

RECESSING BOX

STRIP BOLLARD ACCESSORY S.4350

All STRIP WALL RECESSED luminaires must be installed with the recessing box.

u s . w

Die-cast aluminium column. Base 240 x 160 mm H = 550 mm (Order luminaire STRIP S.4659 separately)

Recessing box must be perfectly installed at the wall level.

ACCESSORY FLANGE FOR STRIP BOLLARD

150

230

S.4372 Flange in steel with screws in stainless steel (to be fixed in concrete).

168

STRIP

速

STRIP SQUARE

S.4659

H = 0.5 m lux

For lamp TC-D 18W G24d-2 1200 lm Recessing box not included 163 cd/klm

S.4343 RECESSING BOX for STRIP SQUARE 217 x 187 mm Width 100 mm

a u .

m o c

. e d

a r nt

STRIP RECTANGULAR

S.4669

For lamp TC-D 26W G24d-3 1800 lm Recessing box not included

lux

u s . w

H = 0.5 m

S.4523 RECESSING BOX for STRIP RECTANGULAR 263 x 135 mm Width 95 mm

169

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

THE SREBRNICE CEMETERY - (Slovenia)

171

a u .

m o c

. e d

a r nt

u s . w

DIAPASON

172

a u .

m o c

. e d

a r nt

u s . w

173

DIAPASON

速

DIAPASON is ideal around buildings where the absolut visual comfort is required. With DIAPASON we have very low consumption, as the fittings works with very low capacity lamps.

a u .

m o c

. e d

a r nt

u s . w

174

DIAPASON

速

The polypropylene recessing-box facilitates installation.

The luminaires are secured to the recessing-box by stainless steel screws.

a u .

c . e

d a r t n

u s . w

The glass diffuser is affixed with silicone directly onto the cover. Accidental strikes and acts of vandalism are reduced because there is a minimal exposed glass.

The cover hides the recessing-box edge, holes and other wall imperfections.

175

DIAPASON

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Toughened clear glass diffuser. Stainless steel screws. Single cable entry with grommet for MINIDIAPASON. Single cable entry with PG11 cable gland for DIAPASON. Dutral gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP54 CLASS I



a u .

m o c

. e d

COLOURS: Black

(code 09)

Aluminium grey (code 14)

a r nt

Luminaire supplied with the recessing box, that must be perfectly installed at the wall level.

u s . w

MINIDIAPASON 25W Works with the main power supply voltage 240V.

240V

MINIDIAPASON LED Luminaire supplied with electronic ballast placed inside the fitting. It must be supplied with main voltage 240V.

MINIDIAPASON FOR QT9 20W 12V MINIDIAPASON, on request, can be supplied in low voltage version for QT9 20W 12V G4 lamp. You must use a 240V÷12V transformer placed at the beginning of the power supply line. DIAPASON T2 6W Luminaire supplied with electronic ballast placed inside the fitting. It must be supplied with main voltage 240V. 240V

176

The light distribution is in accordance with light pollution regulations.

DIAPASON

MINIDIAPASON

S.4536

H = 0.5 m

For lamp QT14 25W 240V G9 260 lm Polypropylene recessing box included.

lux

65 cd/klm

S.4537

H = 0.5 m

With 1 WHITE LED smd 1.5W 240V (With elect. power supply 350mA÷240V) Polypropylene recessing box included. S.4539

lux

3 cd/klm

With 1 BLUE LED smd 1.5W 240V (With elect. power supply 350mA÷240V) Polypropylene recessing box included. LED RED, LED AMBER and LED GREEN versions available on request S.4546

H = 0.5 m

For lamp QT14 25W 240V G9 260 lm Polypropylene recessing box included.

a u .

65 cd/klm

S.4547

c . e

With 1 WHITE LED smd 1.5W 240V (With elect. power supply 350mA÷240V) Polypropylene recessing box included.

S.4549

r t n

lux

H = 0.5 m

lux

3 cd/klm

With 1 BLUE LED smd 1.5W 240V (With elect. power supply 350mA÷240V) Polypropylene recessing box included.

u s . w

LED RED, LED AMBER and LED GREEN versions available on request

DIAPASON

S.4585

H = 0.5 m lux

For lamp T2 6W 240V Gx53 220 lm Polypropylene recessing box included. 121 cd/klm

S.4595

H = 0.5 m lux

For lamp T2 6W 240V Gx53 220 lm Polypropylene recessing box included. 121 cd/klm

177

a u .

m o c

. e d

a r nt

u s . w

178

a u .

m o c

. e d

a r nt

u s . w

PERLETTI OFFICES - Brescia (Italy)

179

a u .

m o c

. e d

a r nt

u s . w

180

BRIQUE

a u .

m o c

. e d

a r nt

u s . w

181

BRIQUE

Wherever there are walls that reflect light, we advise the use of the model with completely unobstructed glass. The wall reflection distributes light well throughout the area, reducing the contrast of light between the luminaires diffuser and the surface of the surrounding wall where the fitting is recessed. Light quantity is good and without glare.

The fitting with 45° grid assures the complete visual comfort, and despite low light output, you can easily see the surrounding area.

When there’s little recessing space available we suggest small-sized MINIBRIQUE fittings with low tension halogen lamps or LED. This wall-recessing solution is acceptable only when you want a very soft light effect.

When MINIBRIQUE is installed in stair risers, you can obtain sufficient illumination to move about safely, without any glare, as the light output is very low.

a u .

Simulation with BRIQUE RECTANGULAR TC-D 18W WITH GRID 45°

TC-D 18W G24d-2

m o c

. e d

a r nt

u s . w

SOFT LED 1,5W 240V

Simulation with MINIBRIQUE SQUARE LED beside the steps

SOFT LED 1,5W 240V

182

Simulation with BRIQUE RECTANGULAR TC-D 18W WITH RING

TC-D 18W G24d-2

Simulation with two MINIBRIQUE SQUARE LED in the stairs risers.

BRIQUE

速

Stainless steel screws affix the luminaire to the recessing box.

a u .

c . e

The reeded glass lightly conceals the view inside the luminaire.

d a r t n

u s . w

The trim and the grill hold the glass diffuser in place while covering the rim of the recessing box and the holes. This assures that wall imperfections remain hidden.

183

MINIBRIQUE and BRIQUE

CLASS III CLASS I CLASS I





a u .

m o c

COLOURS: White

(code 01)

Black

(code 09)

. e d

Aluminium grey (code 14)

a r nt

Luminaire supplied with recessing box in polypropylene , which must be perfectly installed at the wall level.

u s . w

240V

MINIBRIQUE QT9 20W 12V Use a remote transformer 240V÷12V placed at the beginning of the supply line.

MINIBRIQUE LED Luminaire supplied with electronic ballast placed inside the fitting. It must be supplied with main voltage 240V.

BRIQUE TC-D 10W Luminaire supplied with electronic ballast placed inside the fitting. It must be supplied with main voltage 240V. 240V

184

BRIQUE WITH GRILLE 45°

The light distribution is in accordance with light pollution regulations.

MINIBRIQUE

MINIBRIQUE WITH TRIM

S.4531

H = 0.1 m lux

For lamp QT9 20W 12V G4 330 lm Polypropylene recessing box included. (Without transformer)

65 cd/klm

S.4532

H = 0.1 m lux

With 1 WHITE LED smd 1,5W 240V Polypropylene recessing box included. S.4534

3 cd/klm

With 1 BLUE LED smd 1,5W 240V Polypropylene recessing box included. LED RED, LED AMBER and LED GREEN versions available on request

S.4541

H = 0.1 m lux

For lamp QT9 20W 12V G4 330 lm Polypropylene recessing box included. (Without transformer)

S.4542 With 1 WHITE LED smd 1,5W 240V Polypropylene recessing box included.

c . e

S.4544

a u .

72 cd/klm

H = 0.1 m

lux

3 cd/klm

With 1 BLUE LED smd 1,5W 240V Polypropylene recessing box included.

r t n

LED RED, LED AMBER and LED GREEN versions available on request

MINIBRIQUE WITH GRILLE 45°

u s . w

S.4535 For lamp QT9 20W 12V G4 330 lm Polypropylene recessing box included. (Without transformer)

H = 0.1 m lux

29 cd/klm

S.4545 For lamp QT9 20W 12V G4 330 lm Polypropylene recessing box included. (Without transformer)

H = 0.1 m lux

31 cd/klm

185

BRIQUE

BRIQUE WITH TRIM

S.4566

H = 0.2 m lux

For lamp TC-D 10W G24d-1 600 lm Polypropylene recessing box included. 155 cd/klm

S.4576

lux

H = 0.2 m

For lamp TC-D 10W G24d-1 600 lm Polypropylene recessing box included.

a u .

86 cd/klm

m o c

. e d

a r nt

BRIQUE WITH GRILLE 45°

u s . w

S.4569

H = 0.2 m

For lamp TC-D 10W G24d-1 600 lm Polypropylene recessing box included.

lux

68 cd/klm

S.4579

H = 0.2 m

For lamp TC-D 10W G24d-1 600 lm Polypropylene recessing box included.

lux

25 cd/klm

186

a u .

m o c

. e d

a r nt

u s . w

BRIQUE RECTANGULAR



a u .

m o c

COLOURS: White

(code 01)

Black

(code 09)

Aluminium grey

(code 14)

. e d

a r nt

RECESSING BOX

BRIQUE WITH GRILLE 45°

The light distribution is in accordance with light pollution regulations.

All BRIQUE WALL RECESSED luminaires must be installed with the recessing box. The recessing box must be perfectly installed at the wall level.

u s . w

BRIQUE BOLLARD ACCESSORY

S.4550.09 Die-cast aluminium column. Base 240 x 160 mm H = 550 mm (Order luminaire BRIQUE S.4506 or S.4509 separately) Black (code 09)

ACCESSORY FLANGE FOR BRIQUE BOLLARD

150

230

S.4372 Flange in steel with screws in stainless steel (to be fixed in concrete).

188

BRIQUE RECTANGULAR

WITH TRIM

MINIBRIQUE RECTANGULAR

S.4556

H = 0.1 m lux

For lamp TC-S 7W G23 400 lm Recessing box not included. 155 cd/klm

S.4552

H = 0.1 m

With SOFT WHITE LED 2,5W With electronic power supply 24V÷240V

lux

S.4554 3 cd/klm

With SOFT BLUE LED 2,5W With electronic power supply 24V÷240V

S.4553

LED RED, LED AMBER and LED GREEN

RECESSING BOX for MINIBRIQUE 184 x 74 mm Width 90 mm

versions available on request

a u .

BRIQUE RECTANGULAR

S.4506

c . e

For lamp TC-D 18W G24d-2 1200 lm Recessing box not included.

r t n

S.4503

H = 0.2 m

lux

123 cd/klm

u s . w

RECESSING BOX for BRIQUE 220 x 92 mm Width 95 mm

MEGABRIQUE RECTANGULAR

S.4526

H = 0.2 m lux

For lamp TC-D 26W G24d-3 1800 lm Recessing box not included. 115 cd/klm

S.4523 RECESSING BOX for MEGABRIQUE 263 x 135 mm Width 95 mm

189

BRIQUE RECTANGULAR

WITH GRILLE 45°

MINIBRIQUE RECTANGULAR

S.4559

H = 0.1 m

For lamp TC-S 7W G23 400 lm Recessing box not included

lux

68 cd/klm

S.4553 RECESSING BOX for MINIBRIQUE 184 x 74 mm Width 90 mm

a u .

BRIQUE RECTANGULAR

S.4509

H = 0.2 m

For lamp TC-D 18W G24d-2 1200 lm Recessing box not included

r t n

S.4503

RECESSING BOX for BRIQUE 220 x 92 mm Width 95 mm

c . e

lux

61 cd/klm

u s . w

MEGABRIQUE RECTANGULAR

S.4529

H = 0.2 m lux

For lamp TC-D 26W G24d-3 1800 lm Recessing box not included 91 cd/klm

S.4523 RECESSING BOX for MEGABRIQUE 263 x 135 mm Width 95 mm

190

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

BLITZ

192

a u .

m o c

. e d

a r nt

u s . w

193

BLITZ

Give your creativity carte blanche with BLITZ. You can get the most striking results by combining several luminaires to create veritable “light designs”.

Light beams can intersect in numerous ways, limited only by your imagination.

With these options BLITZ is an extremely versatile lighting system.

c . e

d a r t n

u s . w

QT32 100W E27 HIT-TC CRI 35W

a u .

BLITZ allows you to create dazzling scenographic lighting effects which can enhance any environment.

TC-T 18W Gx24d-2

QT32 100W E27

HIT-TC CRI 35W

You can obtain average beam angles of 35°, 40° and 50° by using metal halide, halogen and fluorescent lamps with divergent lenses.

Using metal halide, halogen and fluorescent lamps, it’s possible to obtain a 90° angle with some models.

On every BLITZ luminaire you can mount either intensive lenses or coloured diffused ones. Coloured lenses are produced by a dichroic glass treatment. When you use coloured lenses, in place of clear ones, less light is emitted.

194

Simulations of light effects on a wall from 4 m. Models employing metal halide lamps with convergent lenses emit light with narrow 4° angles, models with halogen lamps emit light with narrow 2° angles.

BLITZ

A robust, die-cast aluminium cap is secured to the base with four vandalproof TORX AISI316 stainless steel screws.

Lamp holders for models using E27 and metal halide lamps are positioned on a steel base that is adjustable along different planes.

a u .

c . e

d a r t n

u s . w

For highly visible accent lights, it is advisable to use lenses behind the windows. BLITZ luminaires come with lenses already installed, using the appropriate “lens-carrier slide”. These may be substituted with coloured dichroic lenses.

It is necessary to adjust the lamps vertically to bring the burning point into the correct position. Only then can you obtain perfectly perpendicular light rays. Perpendicularity is indispensable when rays are very narrow, and for models with multiple windows.

Note the lenses’ special structure; because the tolerance to which they are tempered must be minimal, production is complex. The lenses are essential for optimal lighting and their use permits light intensity highly superior to that of plain glass.

Plan-convex lens for medium beams.

Bi-convex lens for narrow beams.

195

BLITZ

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Toughened glass lenses. Stainless steel screws. Double cable entries with PG13,5 (Ø 6÷12 mm) cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included.

IP65 CLASS I



a u .

m o c

. e d

COLOURS: White

(code 01)

Aluminium grey (code 14)

a r nt

u s . w

COLOURED DICHROIC LENSES NARROW BEAM 2°/4°

COLOURED DICHROIC LENSES MEDIUM BEAM 35°/50°

COLOURED DICHROIC LENSES WIDE BEAM 90°

S.4056 S.4057 S.4058 S.4059 S.4039

S.4076 S.4077 S.4078 S.4079 S.4040

S.4071 S.4072 S.4073 S.4074

Red Blue Yellow Green Clear lens

Red Blue Yellow Green

Lenses to be installed inside of the BLITZ instead of the standard ones.

HIT-TC CRI 35W QT32 100W

HIT-TC CRI 35W QT32 100W TC-T 18W

4° 2°

50° 40° 35°

90° 90° 90°

NOTE: The WIDE BEAM 90° coloured dichroich lenses can be used only with BLITZ wide beam 90° versions.

S.3554 STAKE in plastic. Colour: black (code 09) Total length = 420 mm. The 90 mm upper part must stay out of the ground level, according with the norms.

196

BLITZ 1 WINDOW

1 WIDE BEAM (90°)

S.4044

92 cd/klm

161

With lamp HIT-TC CRI 35W G8,5 3300 lm 1 wide beam 90°

0.5

1.5

93 cd/klm

With lamp QT32 100W E27 1550 lm 1 wide beam 90° (use only PHILIPS HALOGEN A lamp)

0.5

1.5

0.5

1.5

79 cd/klm

With lamp TC-T 18W Gx24d-2 1200 lm 1 wide beam 90°

628 cd/klm

c . e

With lamp QT32 100W E27 1550 lm 1 narrow beam 2° (use only PHILIPS HALOGEN A lamp)

a u .

S.4047

d a r t n

( lux )

(m)

( lux )

90° 0

1 NARROW BEAM (4°)

S.4048

(m)

90°

S.4046

With lamp HIT-TC CRI 35W G8,5 3300 lm 1 narrow beam 4°

( lux )

90°

S.4045

u s . w

200

(m)

( lux )

4° 0

140

2.5

1643 cd/klm

(m)

( lux )

2° 0

(m)

Light effect using COLOURED LENS accessory. S.4048 with S.4057 narrow dichroic blue lens.

197

BLITZ 2 WINDOWS

1 WIDE BEAM (90°) + 1 NARROW BEAM (4°)

S.4054

163 cd/klm

With lamp HIT-TC CRI 35W G8,5 3300 lm 1 narrow beam 4° 1 wide beam 90° S.4055

a r nt

Light effect using COLOURED LENS accessory. S.4055 with S.4057 narrow dichroic blue lens and S.4072 wide dichroic blue lens.

198

93 cd/klm

90°

m o c

. e d

With lamp QT32 100W E27 1550 lm 2 medium beams 40° (use only PHILIPS HALOGEN A lamp)

161

3 ( lux )

0.5

1.5

2 (m)

140

2.5 ( lux )

1 ( lux )

0.5

1.5

2 (m)

a u .

With lamp HIT-TC CRI 35W G8,5 3300 lm 2 medium beams 50°

S.4063 With lamp TC-T 18W Gx24d-2 1200 lm 2 medium beams 35°

1.5 ( lux )

4°

(m)

2°

(m)

90°

2°

S.4061

u s . w

90°

2 MEDIUM BEAMS (40°)

S.4062

200

90°

4° 1060 cd/klm

With lamp QT32 100W E27 1550 lm 1 narrow beam 2° 1 wide beam 90° (use only PHILIPS HALOGEN A lamp)

92 cd/klm

BLITZ 2 WINDOWS

2 WINDOWS 180° NARROW BEAMS (4°)

S.4067

628 cd/klm

200

With lamp HIT-TC CRI 35W G8,5 3300 lm 2 narrow beams 4°

1.5

140

2.5

1643 cd/klm

With lamp QT32 100W E27 1550 lm 2 narrow beams 2° (use only PHILIPS HALOGEN A lamp)

628 cd/klm

c . e

d a r t n

With lamp QT32 100W E27 1550 lm 2 narrow beams 2° (use only PHILIPS HALOGEN A lamp)

1.5

a u .

S.4037

S.4038

(m)

( lux )

2°

2 WINDOWS 90° NARROW BEAMS (4°)

With lamp HIT-TC CRI 35W G8,5 3300 lm 2 narrow beams 4°

( lux )

4°

S.4068

u s . w

200

(m)

( lux )

4° 0

140

2.5

1643 cd/klm

(m)

( lux )

2° 0

(m)

Light effect using COLOURED LENS accessory. S.4038 with n° 2 S.4057 narrow dichroic blue lenses.

199

BLITZ 4 WINDOWS

4 MEDIUM BEAMS (40°)

S.4081 With lamp HIT-TC CRI 35W G8,5 3300 lm 4 medium beams 50°

S.4082 With lamp QT32 100W E27 1550 lm 4 medium beams 40° (use only PHILIPS HALOGEN A lamp) S.4083 With lamp TC-T 18W Gx24d-2 1200 lm 4 medium beams 35°

4 NARROW BEAMS (4°)

S.4087

628 cd/klm

c . e

With lamp HIT-TC CRI 35W G8,5 3300 lm 4 narrow beams 4°

d a r t n

S.4088

With lamp QT32 100W E27 1550 lm 4 narrow beams 2° (use only PHILIPS HALOGEN A lamp)

u s . w

Light effect using COLOURED LENS accessory. S.4088 with n° 4 S.4057 narrow dichroic blue lenses.

SPECIAL VERSION: BLITZ WITH 3 WINDOWS 90° AVAILABLE ON REQUEST.

200

a u . 200

1.5

( lux )

4° 0

140

2.5

1643 cd/klm

(m)

( lux )

2° 0

(m)

a u .

m o c

. e d

a r nt

u s . w

201

a u .

m o c

. e d

a r nt

u s . w

LIFT

202

a u .

m o c

. e d

a r nt

u s . w

203

LIFT

With its minimalist design LIFT can be integrated into the architectural environment so that the light itself, rather than its source, becomes the protagonist. The range comprises 39 models with lamps ranging from metal halide (20W, 35W and 70W) through halogens to compact fluorescent versions.

Right is a comparison of the LIFT and MEGALIFT lighting effects. The 35W metal halide LIFT, with its highly focused lens, covers a distance of approx 4-5 meters, while the 70W metal halide MEGALIFT covers approx 6-7 meters. (The distance reached by the light varies according to ambient light quantity and to the reflective properties of the wall being lit).

a u .

m o c

. e d

a r nt

u s . w

This LIFT installation serves both to embellish and illuminate the entrance of a modern building.

204

LIFT with “wall washer” optic Light beams are directed mainly toward the wall.

LIFT with “washer” optic The “washer” distribution is obtained by using the accessory WIDE BEAM LENS. Light beams are directed on both the wall and the perpendicular plane.

LIFT

速

The LIFT SQUARE models have been redesigned with new dimensions and more essential new lamp options.

To access the lamp, simply remove the aluminium cover.

a u .

c . e

d a r t n

u s . w

LIFT

MEGALIFT

Models using halogen and metal halide lamps have a special internal system for lamp positioning, necessary to get perfect parallel and/or perpendicular beams.

The MEGALIFT narrow-beam models feature highly distinct effects thanks to a converging lens system inside the unit. In LIFT models this system is affixed to the aluminium cover.

The optics in all wide-beam models are precision-designed to concentrate nearly all the light on the walls.

205

LIFT VERTICAL

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Clear intensive lenses. Stainless steel screws. Double cable entries. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS I



a u .

m o c

. e d

COLOURS: White

(code 01)

Aluminium grey (code 14)

a r nt

NARROW BEAM DICHROIC COLOURED LENSES 2°/4° S.4056 S.4057 S.4058 S.4059

u s . w

Red Blue Yellow Green

To be installed inside of the fitting instead of the standard ones. HIT-TC CE 20W QT32 60W

4° 2°

EXAMPLE Light effect using LIFT S.5003 and DICHROIC COLOURED LENS S.4057.

206

LIFT VERTICAL

S.5003

647 cd/klm

With lamp HIT-TC CE 20W PGJ5 1650 lm 1 narrow beam 4° (use only PHILIPS CDM-Tm lamp)

( lux )

4° 0

S.5005

1643 cd/klm

With lamp QT32 60W E27 840 lm 1 narrow beam 2° (use only PHILIPS HALOGEN A lamp)

(m)

( lux )

2° 0

(m)

180

190

205

a u .

m o c

. e d

a r nt

S.5043

647 cd/klm

With lamp HIT-TC CE 20W PGJ5 1650 lm 2 narrow beams 4° (use only PHILIPS CDM-Tm lamp)

u s . w

S.5045 With lamp QT32 60W E27 840 lm 2 narrow beams 2° (use only PHILIPS HALOGEN A lamp)

( lux )

4° 0

1643 cd/klm

(m)

( lux )

2° 0

(m)

180

190

205

207

LIFT SQUARE

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear thoughened glass. (Narrow lens versions). Stainless steel screws. Double cable entries. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS I



a u .

m o c

. e d

COLOURS: White

(code 01)

Aluminium grey (code 14)

a r nt

COLOURED FILTERS S.5006 S.5007 S.5008 S.5009

u s . w

Red Blue Yellow Green

For QT32 100W and HIT-TC CRI 35W lamp versions there is an internal system for lamp regulation by 4 screws. This regulation is necessary to get perfect parallel or perpendicular light beams.

S.5010 WIDE BEAM LENS Acid-etched glass for wide beam versions.

HOW TO MOUNT FILTERS and EXTENSIVE BEAM LENS. Coloured filters and extensive beam lens accessories must be installed inside the fittings, using the provided fixing clamps. Filters or lens DON’T replace the clear standard glasses.

S.5000 3000°K CONVERSION FILTER It is sometimes possible when installing the LIFT 2 windows version with HIT-TC CRI 35W lamps onto a white wall, that there may be a difference in colour between the top (3000°K) and bottom lamp (3300°K). This colour shift is caused by metal halide deposits forming on the bottom lamps arc tube, this problem can be corrected by installing the 3000°K conversion filter inside the luminaire.

208

LIFT SQUARE 1 WINDOW

S.5011 With lamp HIT-TC CRI 35W G8,5 3300 lm 1 wide beam 60°

S.5012 With lamp QT32 100W E27 1550 lm 1 wide beam 60° (Use only PHILIPS HALOGEN A lamp) S.5013

190

180

With lamp TC-D 18W Gx24d-2 1200 lm 1 wide beam 62°

180

205

a u .

m o c

. e d

a r nt

S.5001

With lamp HIT-TC CRI 35W G8,5 3300 lm 1 narrow beam 2°

u s . w

S.5002 With lamp QT32 100W E27 1550 lm 1 narrow beam 2° (Use only PHILIPS HALOGEN A lamp)

180

190

180

205

Light effect using COLOURED LENS accessory. S.5001 with S.5007 coloured dichroic blue filter.

209

LIFT SQUARE 2 WINDOWS

S.5021 With lamp HIT-TC CRI 35W G8,5 3300 lm 2 wide beams 60°

S.5022 With lamp QT32 100W E27 1550 lm 2 wide beams 60° (Use only PHILIPS HALOGEN A lamp) S.5023

190

180

With lamp TC-D 18W Gx24d-2 1200 lm 2 wide beams 62°

180

205

a u .

m o c

S.5031 With lamp HIT-TC CRI 35W G8,5 3300 lm 1 narrow beam 2° 1 wide beam 60°

. e d

a r nt

S.5032

With lamp QT32 100W E27 1550 lm 1 narrow beam 2° 1 wide beam 60° (Use only PHILIPS HALOGEN A lamp)

180

190

180

205

u s . w

S.5041 With lamp HIT-TC CRI 35W G8,5 3300 lm 2 narrow beams 2°

S.5042 With lamp QT32 100W E27 1550 lm 2 narrow beams 2° (Use only PHILIPS HALOGEN A lamp)

180

190

180

210

205

LIFT SQUARE 4 WINDOWS

S.5091 With lamp HIT-TC CRI 35W G8,5 3300 lm 4 wide beams 60°

S.5092 With lamp QT32 100W E27 1550 lm 4 wide beams 60° (Use only PHILIPS HALOGEN A lamp) S.5093

190

180

With lamp TC-D 18W Gx24d-2 1200 lm 4 wide beams 62°

180

205

a u .

m o c

S.5081 With lamp HIT-TC CRI 35W G8,5 3300 lm 4 narrow beams 2°

. e d

a r nt

S.5082

With lamp QT32 100W E27 1550 lm 4 narrow beams 2° (Use only PHILIPS HALOGEN A lamp)

180

190

180

u s . w

205

Light effect using COLOURED LENS accessory. S.5081 with n° 4 S.5007 coloured dichroic blue filters.

211

MEGALIFT SQUARE



a u .

m o c

. e d

COLOURS: White

(code 01)

Aluminium grey (code 14)

a r nt

COLOURED FILTERS S.5016 S.5017 S.5018 S.5019

u s . w

Red Blue Yellow Green

S.5020 WIDE BEAM LENS Acid-etched glass for wide beam versions.

HOW TO MOUNT FILTERS and WIDE BEAM LENS. Coloured filters and wide beam lens accessories must be installed inside the fittings, using the provided fixing clamps. Filters or lens DON’T replace the clear standard glasses. S.5030 3000°K CONVERSION FILTER It is sometimes possible when installing the LIFT 2 windows version with HIT-TC CRI 70W lamps onto a white wall, that there may be a difference in colour between the top (3000°K) and bottom lamp (3300°K). This colour shift is caused by metal halide deposits forming on the bottom lamps arc tube, this problem can be corrected by installing the 3000°K conversion filter inside the luminaire.

212

For HIT-TC CRI 70W lamp versions there is an internal system for lamp regulation by 4 screws. This regulation is necessary to get perfect parallel or perpendicular light beams.

MEGALIFT SQUARE 1 WINDOW

S.5014 With lamp HIT-TC CRI 70W G8,5 6600 lm 1 wide beam 60°

S.5015 With lamp TC-T 26W Gx24d-3 1800 lm 1 wide beam 62°

a u .

m o c

. e d

a r nt

S.5004

With lamp HIT-TC CRI 70W G8,5 6600 lm 1 narrow beam 2°

u s . w

Light effect using COLOURED LENS accessory. S.5004 with S.5017 coloured dichroic blue filter.

213

MEGALIFT SQUARE 2 WINDOWS

S.5024 With lamp HIT-TC CRI 70W G8,5 6600 lm 2 wide beams 60°

S.5025 With lamp TC-T 26W Gx24d-3 1800 lm 2 wide beams 62°

a u .

m o c

S.5034 With lamp HIT-TC CRI 70W G8,5 6600 lm 1 narrow beam 2° 1 wide beam 60°

. e d

a r nt

u s . w

S.5044 With lamp HIT-TC CRI 70W G8,5 6600 lm 2 narrow beams 2°

214

MEGALIFT SQUARE 4 WINDOWS

S.5094 With lamp HIT-TC CRI 70W G8,5 6600 lm 4 wide beams 60°

S.5095 With lamp TC-T 26W Gx24d-3 1800 lm 4 wide beams 62°

a u .

m o c

S.5084 With lamp HIT-TC CRI 70W G8,5 6600 lm 4 narrow beams 2°

. e d

a r nt

u s . w

Light effect using COLOURED LENS accessory. S.5084 with n° 4 S.5017 coloured dichroic blue filters.

215

LIFT RECTANGULAR



a u .

m o c

. e d

COLOURS: White

(code 01)

Aluminium grey (code 14)

a r nt

COLOURED FILTERS S.5056 S.5057 S.5058 S.5059

u s . w

Red Blue Yellow Green

S.5060 WIDE BEAM LENS Acid-etched glass for wide beam versions.

HOW TO MOUNT FILTERS and WIDE BEAM LENS. Coloured filters and wide beam lens accessories must be installed inside the fittings, using the provided fixing clamps. Filters or lens DON’T replace the clear standard glasses. S.5050 3000°K CONVERSION FILTER It is sometimes possible when installing the LIFT 2 windows version with HIT-DE 70W and HIT-DE 150W lamps onto a white wall, that there may be a difference in colour between the top (3000°K) and bottom lamp (3300°K). This colour shift is caused by metal halide deposits forming on the bottom lamps arc tube, this problem can be corrected by installing the 3000°K conversion filter inside the luminaire.

216

LIFT RECTANGULAR

S.5051 With lamp HIT-DE 70W Rx7s 6500 lm 1 wide beam 52°

S.5052 With lamp HIT-DE 150W Rx7s 13250 lm 1 wide beam 52°

S.5053 With 2 lamps TC-D 18W G24d-2 1200 lm 1 wide beam 70°

a u .

m o c

S.5061 With lamp HIT-DE 70W Rx7s 6500 lm 2 wide beams 52°

. e d

a r nt

S.5062

With lamp HIT-DE 150W Rx7s 13250 lm 2 wide beams 52°

u s . w

S.5063 With 2 lamps TC-D 18W G24d-2 1200 lm 2 wide beams 70°

S.5071 With lamp HIT-CRI 70W G12 6600 lm 1 narrow beam 4° 1 wide beam 102° S.5072 With lamp HIT-CRI 150W G12 14000 lm 1 narrow beam 4° 1 wide beam 102°

217

a u .

m o c

. e d

a r nt

u s . w

218

a u .

m o c

. e d

a r nt

u s . w

MESTSKÝ ÚRAD - (Czech Republic)

219

a u .

m o c

. e d

a r nt

u s . w

LINEAR FRAME

220

a u .

m o c

. e d

a r nt

u s . w

221

LINEAR

速

FRAME

LINEAR FLUORESCENT 39W

LINEAR FRAME uses T5 fluorescent lamp and the new LED technology. The floodlight provides soft illumination with a wide distribution that allows the creation of stimulating effects.

LINEAR FLUORESCENT 8W

a u .

m o c

The minimalist shape of LINEAR FRAME becomes integrated with the buildings architecture without spoiling its appearance.

. e d

a r nt

u s . w

222

LINEAR

FRAME

The polycarbonate diffuser is UV-stabilised, making the unit highly impact and vandal resistant. You can access the lamp compartment by removing the diffuser.

All models are furnished with LED circuit or a T5 fluorescent lamp.

a u .

c . e

d a r t n

u s . w

To install the luminaire, attach two aluminium mounting brackets to the wall. Use two dowels to fix the unit, which is hung on the mounting brackets.

LINEAR FRAME can also function as a projector. The lamp compartment swivels along a horizontal axis of ± 90° by means of an adjustable arm mechanism. When the desired incline is established, two serrated jaws lock it in place with a screw. This system holds the position secure in case of accidental blows.

The electric cable assembly block is situated on the rear of the device. Through wiring is possible with M20 (Ø 7÷13 mm) cable glands.

223

LINEAR FRAME

Die-cast EN AB-44100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Clear polycarbonate diffuser 10 mm thick. 99.98% pure aluminium reflector. Stainless steel screws. Double cable entries for M20 cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. LED versions with LED radiation in class 1M. Lamp included. IP65 CLASS II



a u .

m o c

. e d

COLOUR: Aluminium grey (code 14)

a r nt

ACCESSORIES FOR LINEAR FRAME SHORT

COLOURED FILTERS for fluorescent lamp version S.5956 Red S.5957 Blue S.5958 Yellow S.5959 Green

u s . w

224

ACCESSORIES FOR LINEAR FRAME LONG COLOURED FILTERS for fluorescent lamp version S.5966 Red S.5967 Blue S.5968 Yellow S.5969 Green

LINEAR LED

LINEAR SHORT C0 104° C90 112°

FRAME

S.5975 With ACCENT WHITE LED 6x1W 240V

S.5977

Values measured with luminaire tilted for ~ 30°

With ACCENT BLUE LED 6x1W 240V

LED RED, LED AMBER and LED GREEN versions available on request

84 80

355

327

a u .

m o c

. e d

a r nt

LINEAR LONG

u s . w

C0 74° C90 116°

S.5985 With ACCENT WHITE LED 18x1W 240V

S.5987

Values measured with luminaire tilted for ~ 30°

With ACCENT BLUE LED 18x1W 240V

LED RED, LED AMBER and LED GREEN versions available on request

84 80

946

918

225

LINEAR FRAME

LINEAR SHORT C0 17°+28°

= 5°

S.5971 With lamp T5 8W G5 450 lm With electronic ballast Asymmetric reflector

C90 102°

355

84 80

327

LINEAR LONG C0 17°+26°

C90 108°

84 80 53

226

918

m o c

S.5981 With lamp T5 39W G5 3500 lm With electronic ballast Asymmetric reflector

. e d

a r nt

u s . w

946

= 9°

a u .

m o c

. e d

a r nt

u s . w

227

a u .

m o c

. e d

a r nt

u s . w

SLOT

228

a u .

m o c

. e d

a r nt

u s . w

229

SLOT

SLOT HIT-CRI 70W 7° UP - 70W 7° DOWN

SLOT HIT-CRI 70W 7° UP - 70W 7° + ELLIPSOIDAL LENS DOWN

SLOT HIT-CRI 70W 7° UP - 70W 14° DOWN

a u .

The applications show the various effects on the same 10 m wall allowing you to understand the possible lighting solutions which can be created wen using SLOT HIT-CRI 70W BI-DIRECTIONAL. There are two lamps inside the fitting, each one with its own adjustable reflector and independent control gear, in order to produce excellent light output and great flexibility. Moreover the intelligent use of lenses can change the shape of the light and increase the project range solutions. The 7º narrow beam reflector creates very visible lighting accents, covering long distances. By adding an ellipsoidal beam lens the light can be shaped for better illumination of walkways near the wall. The 14º beam reflector creates a much softer effect, distributing the light in an even wider space when used in combination with a wide beam lens. The simulation shows the intelligent use of SLOT luminaires: during the early evening both lamps are needed for both functional and accent lighting, during the late evening the indirect lamp can be switched off in order to save energy and avoid light pollution. The direct lamp only works, providing a good functional light level for the security of the building.

SLOT HIT-CRI 70W 7° UP - 70W 14° + EXTENSIVE LENS DOWN

a r nt

. e d

u s . w

230

m o c

SLOT

The BI-DIRECTIONAL models have two lamps, each with independently operating adjustable reflectors and control gear. In this way you can personalize applications, using one lighting type projecting upward, and another emitting down. You have maximum flexibility with a choice of 7°/8° or 14°/16° reflectors, wide or ellipsoidal lens accessories, and a series of coloured filters.

a u .

m o c

. e d

a r nt

u s . w

Reflectors that adjust ± 15° for efficient aiming of metal halide and halogen models. MINISLOT, SLOT and MEGASLOT come with IP65 fast connectors.

231

MICROSLOT

Die-cast and extruded aluminium housing (copper free) with high corrosion resistance. Clear toughened glass 6 mm thick. Stainless steel screws. Single cable entry (Ø 8 ÷ 12 mm). Silicone gaskets. Powdered paint with high corrosion resistance. Lamps not included. IP65 CLASS I



a u .

5 Joule impact.

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey (code 24)

a r nt

COLOURED FILTERS S.3996 S.3997 S.3998 S.3999

u s . w

RED BLUE YELLOW GREEN

WIDE LENS S.3991 from 30° to ~40° from 32° to ~60° ELLIPSOIDAL LENS S.3992 from 10° to ~12°x60°

NOTE: All the lenses and the coloured filters must be installed below the front glass. It’s possible to install only one accessory at a time, so it’s not possible to install coloured filters and lenses together.

232

MICROSLOT

MICROSLOT CEILING

30°

S.3923 For lamp QPAR16 40W E14 25° Lamp position adjustable ± 10°

32°

S.3924 For lamp QR-CBC 51 20W 12V GU5,3 38° With electronic transformer Lamp position adjustable ± 10°

10°

S.3927W With ACCENT WHITE LED 3x1W 240V (On request version with 45° beam lenses) S.3927BL With ACCENT BLUE LED 3x1W 240V (On request version with 45° beam lenses)

h(m)

Ø(m)

10° Em(lx)

1 2 3 4 5

0.18 0.36 0.54 0.71 0.89

438 110 49 27 18

LED RED, LED AMBER and LED GREEN versions available on request

a u .

MICROSLOT WALL

30°

For lamp QPAR16 40W E14 25° Lamp position adjustable ± 10°

32°

m o c

S.3933

. e d

a r nt

S.3934

140 x 75

For lamp QR-CBC 51 35W 12V GU5,3 38° With electronic transformer Lamp position adjustable ± 10°

u s . w 10°

S.3937W With ACCENT WHITE LED 3x1W 240V (On request version with 45° beam lenses) S.3937BL With ACCENT BLUE LED 3x1W 240V (On request version with 45° beam lenses)

h(m)

Ø(m)

10° Em(lx)

1 2 3 4 5

0.18 0.36 0.54 0.71 0.89

438 110 49 27 18

LED RED, LED AMBER and LED GREEN versions available on request

MICROSLOT WALL UP-DOWN

30°

S.3943 For 2 lamps QPAR16 40W E14 25° Lamps position adjustable ± 10°

30° 32°

S.3944

32°

For 2 lamps QR-CBC 51 35W 12V GU5,3 38° With electronic transformer Lamps position adjustable ± 10°

140 x 75

10°

S.3947W With ACCENT WHITE LED 3x1W 240V (On request version with 45° beam lenses) S.3947BL

10°

With ACCENT BLUE LED 3x1W 240V (On request version with 45° beam lenses)

h(m)

Ø(m)

10° Em(lx)

1 2 3 4 5

0.18 0.36 0.54 0.71 0.89

438 110 49 27 18

LED RED, LED AMBER and LED GREEN versions available on request

233

MINISLOT

Die-cast and extruded aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 8 mm thick. Stainless steel screws. Electrical wiring with fast connectors (with PG11 cable gland for MINISLOT CEILING). Silicone gaskets. Powdered paint with high corrosion resistance. Lamps not included. IP65 CLASS I



a u .

5 Joule impact.

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey (code 24)

a r nt

COLOURED FILTERS S.3916 S.3917 S.3918 S.3919

u s . w

RED BLUE YELLOW GREEN

(Do not use coloured filters for 2 x HIT-TC CRI 35W version)

WIDE LENS S.3911 from 30° to ~52° from 13° to ~37° from 102° to ~120° ELLIPSOIDAL LENS S.3912 from 10° to ~16°x60° from 13° to ~14°x48°

234

MINISLOT

MINISLOT CEILING

102°

S.3920 For lamp TC-TEL 18W Gx24q-2 1200 lm With electronic ballast Lamp position fixed

30°

S.3921 For lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° Lamp with integral reflector, beam angles available : 10°, 30°

S.3921

S.3920 S.3922

13°

S.3922 For lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position adjustable ± 15° 4909 cd/klm

13° Em(lx)

2 4 6 8 10

0.44 0.88 1.32 1.77 2.21

2088 522 232 131 84

m o c

S.3930 For lamp TC-TEL 18W Gx24q-2 1200 lm With electronic ballast Lamp position fixed

30°

Ø(m)

a u .

MINISLOT WALL

102°

h(m)

. e d

a r nt

S.3931

For lamp QPAR30 75W E27 30° Lamp position adjustable ± 15° Lamp with integral reflector, beam angles available : 10°, 30°

u s . w

13°

S.3932 For lamp HIT-TC CRI 35W G8,5 3300 lm Lamp position adjustable ± 15° 4909 cd/klm

h(m)

Ø(m)

13° Em(lx)

2 4 6 8 10

0.44 0.88 1.32 1.77 2.21

2088 522 232 131 84

h(m)

Ø(m)

13° Em(lx)

2 4 6 8 10

0.44 0.88 1.32 1.77 2.21

2088 522 232 131 84

MINISLOT WALL UP-DOWN

S.3941

S.3940 S.3942

102°

S.3940

102°

For 2 lamps TC-TEL 18W Gx24q-2 1200 lm With electronic ballasts Lamps position fixed

30°

S.3941

30°

For 2 lamps QPAR30 75W E27 30° Lamps position adjustable ± 15° Lamps with integral reflector, beam angles available : 10°, 30°

13°

S.3942 For 2 lamps HIT-TC CRI 35W G8,5 3300 lm Lamps position adjustable ± 15°

13°

4909 cd/klm

235

SLOT

Die-cast and extruded aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 8 mm thick. Stainless steel screws. Electrical wiring with fast connectors. Silicone gaskets. Powdered paint with high corrosion resistance. Lamps not included. IP65 CLASS I



a u .

5 Joule impact.

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey (code 24)

a r nt

COLOURED FILTERS S.3906 S.3907 S.3908 S.3909

u s . w

RED BLUE YELLOW GREEN

WIDE LENS S.3901 from 14° to ~44° from 58° to ~62°

(Do not use coloured filters for 2 x HIT-CRI 70W version)

ELLIPSOIDAL LENS S.3902 from 7° to ~10°x32°

ANTIGLARE LOUVRE

S.5500 Only for SLOT with HIT-CRI lamp and 7° beam reflector.

236

SLOT

SLOT CEILING

58°

S.3925

14°

S.3926

Values obtained with TC-TEL 42W

For lamp TC-TEL 26/32/42W Gx24q-3/4 1800/2400/3200 lm With electronic ballast Lamp position fixed 7°

For lamp HIT-CRI 70W G12 6600 lm (7° beam reflector on request) Lamp position adjustable ± 15°

13044 cd/klm 3517 cd/klm

14°

Ø(m)

14° Em(lx)

2 4 6 8 10

0.51 1.01 1.52 2.02 2.53

3122 780 347 195 125

S.3935 For lamp TC-TEL 26/32/42W Gx24q-3/4 1800/2400/3200 lm With electronic ballast Lamp position fixed

h(m)

a u .

SLOT WALL

58°

14°

d a r t n

For lamp HIT-CRI 70W G12 6600 lm (7° beam reflector on request) Lamp position adjustable ± 15°

u s . w

7°

14°

13044 cd/klm 3517 cd/klm

7°

Em(lx)

0.24 12160 3040 0.49 1351 0.73 760 0.98 486 1.22

Values obtained with TC-TEL 42W

c . e

S.3936

Ø(m)

h(m)

Ø(m)

14° Em(lx)

2 4 6 8 10

0.51 1.01 1.52 2.02 2.53

3122 780 347 195 125

Ø(m)

7°

Em(lx)

0.24 12160 3040 0.49 1351 0.73 760 0.98 486 1.22

SLOT WALL UP-DOWN

58°

S.3945

58°

For 2 lamps TC-TEL 26/32/42W Gx24q-3/4 1800/2400/3200 lm With 2 electronic ballasts Lamps position fixed

14°

S.3946

14°

Values obtained with TC-TEL 42W

7°

14°

For 2 lamps HIT-CRI 70W G12 6600 lm (7° beam reflectors on request) Lamps position adjustable ± 15° 13044 cd/klm 3517 cd/klm

h(m)

Ø(m)

14° Em(lx)

2 4 6 8 10

0.51 1.01 1.52 2.02 2.53

3122 780 347 195 125

Ø(m)

7°

Em(lx)

0.24 12160 3040 0.49 1351 0.73 760 0.98 486 1.22

237

MEGASLOT

Die-cast and extruded aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 12 mm thick. Stainless steel screws. Electrical wiring with fast connectors. Silicone gaskets. Powdered paint with high corrosion resistance. Lamps not included. IP65 CLASS I



a u .

12 Joule impact.

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey (code 24)

a r nt

COLOURED FILTERS S.3986 S.3987 S.3988 S.3989

u s . w

RED BLUE YELLOW GREEN

WIDE LENS S.3981 from 16° to ~42°

(Do not use coloured filters for 2 x HIT-CRI 150W version)

ELLIPSOIDAL LENS S.3980 from 8° to ~10°x42°

ANTIGLARE LOUVRE

S.5500 Only for MEGASLOT with HIT-CRI lamp and 8° beam reflector.

238

MEGASLOT

MEGASLOT CEILING

16°

S.3929

8°

For lamp HIT-CRI 150W G12 14000 lm (8° beam reflector on request) Lamp position adjustable ± 15°

11936 cd/klm 2085 cd/klm

MEGASLOT WALL

16°

S.3939

550

16°

c . e

For lamp HIT-CRI 150W G12 14000 lm (8° beam reflector on request) Lamp position adjustable ± 15°

h(m)

Ø(m)

16° Em(lx)

2 4 6 8 10

0.57 1.14 1.71 2.28 2.85

3564 891 396 223 143

a u .

8°

r t n

16°

11936 cd/klm 2085 cd/klm

h(m)

Ø(m)

16° Em(lx)

2 4 6 8 10

0.57 1.14 1.71 2.28 2.85

3564 891 396 223 143

h(m)

Ø(m)

16° Em(lx)

2 4 6 8 10

0.57 1.14 1.71 2.28 2.85

3564 891 396 223 143

Ø(m)

8°

Em(lx)

0.29 21386 5347 0.59 2376 0.88 1337 1.18 855 1.47

Ø(m)

8°

Em(lx)

0.29 21386 5347 0.59 2376 0.88 1337 1.18 855 1.47

u s . w

MEGASLOT WALL UP-DOWN

16°

8°

16°

For 2 lamps HIT-CRI 150W G12 14000 lm (8° beam reflectors on request) Lamps position adjustable ± 15° 11936 cd/klm 2085 cd/klm

Ø(m)

8°

Em(lx)

0.29 21386 5347 0.59 2376 0.88 1337 1.18 855 1.47

550

16°

S.3949

239

a u .

m o c

. e d

a r nt

u s . w

240

a u .

m o c

. e d

a r nt

u s . w

241

a u .

m o c

. e d

a r nt

u s . w

242

ZIP-PLUS DOWNLIGHT

a u .

m o c

. e d

a r nt

u s . w

243

ZIP-PLUS

速

DOWNLIGHT

With metal halide MEGAZIP-PLUS DOWNLIGHT you can illuminate an environment in two diffrent ways, using ceiling-recessed light fittings. In the first example, using an asymmetric wall washer reflector you emphasise only the wall.

In the second example, using a wide symmetric reflector, you light up both the walll and the surrounding area.

HIT-DE 70W Rx7s

MEGAZIP-PLUS DOWNLIGHT with asymmetric reflector

a u .

m o c

. e d

a r nt

Using recessed ceiling luminaires can be an alternative solution to inground fittings, if it is impossible to install a buried system. In the simulation you can see how ZIP-PLUS DOWNLIGHT fittings contribute to illuminate the walkways around the building.

u s . w

HIT-CRI 70W G12

244

MEGAZIP-PLUS DOWNLIGHT with symmetric reflector

ZIP-PLUS

速

DOWNLIGHT

ZIP-PLUS DOWNLIGHT offers a wide range of IP65 ceiling-recessed luminaires.

Access the lamp by simply removing the front trims.

a u .

m o c

. e d

a r nt

u s . w

The luminaires are fixed to the false ceiling by a heavy-duty bracket system, adjustable from inside the luminaire.

MEGAZIP-PLUS DOWNLIGHT models come with a steel safety wire.

245

MINIZIP-PLUS

DOWNLIGHT Ø 135 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 front trim or aluminium front trim 2 mm thick. Toughened glass 8 mm thick. Stainless steel screws. Single cable entry with PG13,5 cable gland. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS III  for 12V and RGB versions CLASS I for 240V versions



a u .

12 Joule impact.

m o c

. e d

FINISHING: Aluminium grey (code 14) Stainless steel

(code 19)

a r nt

MINIZIP-PLUS DOWNLIGHT HALOGEN 35W 12V Fittings with dichroic lamp 35W 12V use a remote transformer 240V ÷ 12V placed at the beginning of the supply line.

u s . w

MINIZIP-PLUS DOWNLIGHT FLUORESCENT 6W 240V Gx53

QR-CBC 51

35W

12V

1 kg

240V

1 kg

ACCENT LED

240V

1 kg

Must be supplied with main voltage 240V. S.5811 - EASY RGB CONTROLLER MASTER/SLAVE CONTROL UNIT IN IP56 BOX 340x260x130 mm. With electronic power supply 30W 240V, sequencer and terminal block for up to 10 luminaires. By a remote infrared control possibility to: 1. Run a pre-programmed RGB colour sequence of 60 sec. (not modifiable); 2. Set manually the static desired colour by dimming independently the 3 LED. It is possible to syncronize max 50 luminaires simultaneously by using max 5 BOX S.5811.

246

Product weight

Version

DICHROIC COLOURED FILTERS for ROUND and SQUARE versions S.5701 Red S.5702 Blue S.5703 Yellow S.5704 Green NOTE: The dichroic coloured filters can be used only on QR-CBC 51 20W and T2 6W versions.

S.5814 - ADVANCED RGB CONTROLLER

EASY DMX SWITCHBOARD S.5721

MINIZIP-PLUS LED

DOWNLIGHT Ø 135 mm

STAINLESS STEEL FRONT TRIM

30°

S.5881.19 With RGB ACCENT LED circuit 3W 350 mA Circuit with 3 LED 1W 350 mA and 30° beam lens: _ 1 red _ 1 green _ 1 blue (10° lenses on request) (Power supply and RGB controller not included)

Ømin 114 Ømax 116

30°

S.5882.19 With ACCENT WHITE LED 30° 3x1W 240V (10° lenses on request)

116

10÷28

406 cd/klm

S.5884.19

Ø 135

406 cd/klm

With ACCENT BLUE LED 30° 3x1W 240V (10° lenses on request) LED RED, LED AMBER and LED GREEN

a u .

versions available on request

m o c

a r nt

STAINLESS STEEL FRONT TRIM

30°

min 114 max 116

u s . w 30°

116

10÷28

135

S.5891.19

With RGB ACCENT LED circuit 3W 350 mA Circuit with 3 LED 1W 350 mA and 30° beam lens: _ 1 red _ 1 green _ 1 blue (10° lenses on request) (Power supply and RGB controller not included)

. e d

406 cd/klm

S.5892.19 With ACCENT WHITE LED 30° 3x1W 240V (10° lenses on request) S.5894.19 With ACCENT BLUE LED 30° 3x1W 240V (10° lenses on request)

406 cd/klm

LED RED, LED AMBER and LED GREEN versions available on request

247

MINIZIP-PLUS ROUND

DOWNLIGHT Ø 135 mm

ALUMINIUM FRONT TRIM

42°

S.4841 With lamp QR-CBC 51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer)

70°

595 cd

S.4885 With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed (SOFT LED 1,5W 240V lamp on request)

Ø(m)

42° Em(lx)

1 2 3 4 5

0.75 1.50 2.24 2.99 3.74

246 61 27 15 10

h(m)

Ø(m)

70° Em(lx)

0.4 0.8 1.2 1.6 2.0

0.56 1.12 1.69 2.25 2.81

73 18 8 5 3

h(m)

Ø(m)

44° Em(lx)

1 2 3 4 5

0.80 1.60 2.40 3.20 4.00

327 82 36 20 13

h(m)

Ø(m)

42° Em(lx)

1 2 3 4 5

0.75 1.50 2.24 2.99 3.74

246 61 27 15 10

h(m)

Ø(m)

70° Em(lx)

0.4 0.8 1.2 1.6 2.0

0.56 1.12 1.69 2.25 2.81

73 18 8 5 3

h(m)

Ø(m)

44° Em(lx)

1 2 3 4 5

0.80 1.60 2.40 3.20 4.00

327 82 36 20 13

10÷28

116

Ømin 114 Ømax 116

193 cd/klm

h(m)

Ø 135

44°

S.4842 With lamp QR-CBC 51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer)

750 cd

a u .

m o c

. e d

a r nt

STAINLESS STEEL FRONT TRIM

u s . w

42°

S.5841.19 With lamp QR-CBC 51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer)

70°

S.5885.19 With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed (SOFT LED 1,5W 240V lamp on request)

193 cd/klm

10÷28

116

Ømin 114 Ømax 116

595 cd

Ø 135

44°

S.5842.19 With lamp QR-CBC 51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer)

248

750 cd

MINIZIP-PLUS SQUARE

DOWNLIGHT

135 mm

ALUMINIUM FRONT TRIM

48°

S.4861 With lamp QR-CBC 51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer)

82°

497 cd

S.4895 With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed (SOFT LED 1,5W 240V lamp on request)

Ø(m)

48° Em(lx)

1 2 3 4 5

0.89 1.78 2.67 3.56 4.45

191 48 21 12 8

h(m)

Ø(m)

82° Em(lx)

0.4 0.8 1.2 1.6 2.0

0.68 1.36 2.04 2.72 3.40

65 16 7 4 3

h(m)

Ø(m)

38° Em(lx)

1 2 3 4 5

0.68 1.36 2.04 2.72 3.40

521 130 58 33 21

h(m)

Ø(m)

48° Em(lx)

1 2 3 4 5

0.89 1.78 2.67 3.56 4.45

191 48 21 12 8

h(m)

Ø(m)

82° Em(lx)

0.4 0.8 1.2 1.6 2.0

0.68 1.36 2.04 2.72 3.40

65 16 7 4 3

h(m)

Ø(m)

38° Em(lx)

1 2 3 4 5

0.68 1.36 2.04 2.72 3.40

521 130 58 33 21

10÷28

116

min 114 max 116

214 cd/klm

h(m)

135

38°

S.4862 With lamp QR-CBC 51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer)

a u .

1215 cd

m o c

. e d

a r nt

STAINLESS STEEL FRONT TRIM

u s . w

48°

S.5861.19 With lamp QR-CBC 51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer)

82°

S.5895.19 With fluorescent lamp T2 6W 240V Gx53 220 lm Lamp position fixed (SOFT LED 1,5W 240V lamp on request)

214 cd/klm

10÷28

116

min 114 max 116

497 cd

135

38°

S.5862.19 With lamp QR-CBC 51 35W 12V GU5,3 38° Lamp position adjustable ± 15° (Without transformer)

1215 cd

249

ZIP-PLUS

DOWNLIGHT Ø 210 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 front trim or aluminium front trim 2 mm thick. Toughened glass 10 mm thick. Stainless steel screws. Double cable entries with PG13,5 cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS I



a u .

12 Joule impact.

m o c

. e d

FINISHING: Aluminium grey (code 14) Stainless steel

(code 19)

a r nt

Double cable entries with PG13,5 (Ø 6÷12 mm) cable glands. Use rubber flexible cables. Not suitable for armoured cables.

u s . w

ZIP-PLUS DOWNLIGHT METAL HALIDE HIT-TC CRI 20W G8,5 can also be supplied with metal halide lamp HIT-TC CRI 35W G8,5 with remote electronic gear in aluminium box IP65 with two PG13,5 (Ø 6÷12 mm) cable glands.

DICHROIC COLOURED FILTERS for ROUND versions S.5711 S.5712 S.5713 S.5714

Red Blue Yellow Green

DICHROIC COLOURED FILTERS for SQUARE versions S.5715 S.5716 S.5717 S.5718

250

Red Blue Yellow Green

Luminaire weight

Gear box weight

18W

2,5 kg

–

HIT-TC CRI 20W

2,5 kg

–

HIT-TC CRI 35W

2,5 kg

2 kg

Version

TC-T

S.5710 HONEY COMB ROUND Antiglare filter.

S.5719 HONEY COMB SQUARE Antiglare filter.

ZIP-PLUS ROUND

DOWNLIGHT Ø 210 mm

ALUMINIUM FRONT TRIM

68°

S.4843

Ø(m)

68° Em(lx)

1 2 3 4 5

1.36 2.72 4.08 5.44 6.80

68 17 8 4 3

h(m)

Ø(m)

42° Em(lx)

2 4 6 8 10

1.52 3.04 4.56 6.08 7.60

128 32 14 8 5

h(m)

Ø(m)

70° Em(lx)

1 2 3 4 5

1.40 2.79 4.19 5.58 6.98

a u .

77 19 9 5 3

h(m)

Ø(m)

18° Em(lx)

2 4 6 8 10

0.64 1.28 1.92 2.56 3.20

673 168 75 42 27

h(m)

Ø(m)

68° Em(lx)

1 2 3 4 5

1.36 2.72 4.08 5.44 6.80

68 17 8 4 3

h(m)

Ø(m)

42° Em(lx)

2 4 6 8 10

1.52 3.04 4.56 6.08 7.60

128 32 14 8 5

h(m)

Ø(m)

70° Em(lx)

1 2 3 4 5

1.40 2.79 4.19 5.58 6.98

77 19 9 5 3

h(m)

Ø(m)

18° Em(lx)

2 4 6 8 10

0.64 1.28 1.92 2.56 3.20

673 168 75 42 27

With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed

h(m)

200 cd/klm

42°

S.4844 With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request with HIT-TC CRI 35W G8,5)

758 cd/klm

7÷30

207

Ømin 183 Ømax 185

Ø 210

70°

S.4850 With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed 229 cd/klm

18°

S.4851 With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request with HIT-TC CRI 35W G8,5)

e d a

3370 cd/klm

r t n

STAINLESS STEEL FRONT TRIM

u s . w

68°

S.5843.19 With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed 200 cd/klm

42°

S.5844.19 With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request with HIT-TC CRI 35W G8,5)

758 cd/klm

7÷30

207

Ømin 183 Ømax 185

Ø 210

70°

S.5850.19 With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed 229 cd/klm

18°

S.5851.19 With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request with HIT-TC CRI 35W G8,5)

3370 cd/klm

251

ZIP-PLUS SQUARE

DOWNLIGHT

210 mm

ALUMINIUM FRONT TRIM

68°

S.4863 With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed 200 cd/klm

46°

S.4864 With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request with HIT-TC CRI 35W G8,5)

581 cd/klm

h(m)

Ø(m)

68° Em(lx)

1 2 3 4 5

1.36 2.72 4.08 5.44 6.80

68 17 8 4 3

h(m)

Ø(m)

46° Em(lx)

2 4 6 8 10

1.69 3.38 5.07 6.76 8.45

94 23 10 6 4

h(m)

Ø(m)

69° Em(lx)

1 2 3 4 5

1.38 2.76 4.14 5.52 6.90

86 22 10 5 3

h(m)

Ø(m)

24° Em(lx)

2 4 6 8 10

0.85 1.70 2.55 3.40 4.25

307 77 34 19 12

h(m)

Ø(m)

68° Em(lx)

1 2 3 4 5

1.36 2.72 4.08 5.44 6.80

68 17 8 4 3

h(m)

Ø(m)

46° Em(lx)

2 4 6 8 10

1.69 3.38 5.07 6.76 8.45

94 23 10 6 4

h(m)

Ø(m)

69° Em(lx)

1 2 3 4 5

1.38 2.76 4.14 5.52 6.90

86 22 10 5 3

h(m)

Ø(m)

24° Em(lx)

2 4 6 8 10

0.85 1.70 2.55 3.40 4.25

307 77 34 19 12

7÷30

207

min 183 max 185

210

69°

S.4870 With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed 257 cd/klm

24°

S.4871 With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request with HIT-TC CRI 35W G8,5)

e d a

a u .

1588 cd/klm

r t n

STAINLESS STEEL FRONT TRIM

u s . w

68°

S.5863.19 With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed 200 cd/klm

46°

S.5864.19 With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request with HIT-TC CRI 35W G8,5)

581 cd/klm

7÷30

207

min 183 max 185

210

69°

S.5870.19 With lamp TC-T 18W Gx24d-2 1200 lm Lamp position fixed 257 cd/klm

24°

252

S.5871.19 With lamp HIT-TC CRI 20W G8,5 1700 lm Lamp position adjustable ± 15° With electronic ballast (On request with HIT-TC CRI 35W G8,5)

1588 cd/klm

a u .

m o c

. e d

a r nt

u s . w

253

MEGAZIP-PLUS

DOWNLIGHT Ø 280 mm

Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stainless steel AISI316 front trim or aluminium front trim 2 mm thick. Toughened glass 12 mm thick. Stainless steel screws. Double calbe entries with PG13,5 cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS I



a u .

12 Joule impact.

m o c

. e d

FINISHING: Aluminium grey (code 14) Stainless steel

(code 19)

a r nt

Double cable entries with PG13,5 (Ø 6÷12 mm) cable glands. Use rubber flexible cables. Not suitable for armoured cables.

u s . w

MEGAZIP-PLUS DOWNLIGHT METAL HALIDE HIT-CRI 70W G12 can also be supplied with metal halide lamp HIT-CRI 150W G12 with remote electronic gear in aluminium box IP65 with two PG13,5 (Ø 6÷12 mm) cable glands.

Version

Luminaire weight

Gear box weight

TC-T

26W

4,7 kg

–

HIT-CRI

35W

5,9 kg

–

HIT-CRI

70W

6 kg

–

HIT-CRI

150W

4,2 kg

3 kg

HIT-DE

70W

6,2 kg

–

DICHROIC COLOURED FILTERS for ROUND versions S.5101 Red S.5102 Blue S.5103 Yellow S.5104 Green Only for HIT-CRI 35W and TC-T 26W.

S.5700

DICHROIC COLOURED FILTERS for SQUARE versions S.5106 Red S.5107 Blue S.5108 Yellow S.5109 Green Only for HIT-CRI 35W and TC-T 26W.

S.5705

HONEY COMB ROUND Antiglare filter Only for 26W fluorescent and 35W metal halide versions.

HONEY COMB SQUARE Antiglare filter Only for 26W fluorescent and 35W metal halide versions. MEGAZIP-PLUS DOWNLIGHT On request can be supplied with HIT-DE 70W lamp with asymmetric reflector for WALL WASHER application. (See S.8529.19 and S.8559.19 photometric data).

254

MEGAZIP-PLUS ROUND

DOWNLIGHT Ø 280 mm

ALUMINIUM FRONT TRIM

49°

S.5563 With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with HIT-CRI 150W G12)

70°

418 cd/klm

S.5564 With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed 271 cd/klm

h(m)

Ø(m)

49° Em(lx)

1 2 3 4 5

0.92 1.84 2.76 3.68 4.60

1138 285 126 71 46

h(m)

Ø(m)

70° Em(lx)

1 2 3 4 5

1.38 2.76 4.14 5.52 6.90

136 34 15 9 5

h(m)

Ø(m)

15° Em(lx)

2 4 6 8 10

0.52 1.04 1.56 2.08 2.60

1296 324 144 81 52

h(m)

Ø(m)

14° Em(lx)

2 4 6 8 10

0.50 1.00 1.49 1.99 2.49

2269 567 252 142 91

h(m)

Ø(m)

49° Em(lx)

1 2 3 4 5

0.92 1.84 2.76 3.68 4.60

1138 285 126 71 46

h(m)

Ø(m)

70° Em(lx)

1 2 3 4 5

1.38 2.76 4.14 5.52 6.90

136 34 15 9 5

h(m)

Ø(m)

15° Em(lx)

2 4 6 8 10

0.52 1.04 1.56 2.08 2.60

1296 324 144 81 52

h(m)

Ø(m)

14° Em(lx)

2 4 6 8 10

0.50 1.00 1.49 1.99 2.49

2269 567 252 142 91

7÷38

210

Ømin 255 Ømax 257

Ø 280

15°

S.5567 With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 15°

a u .

3192 cd/klm

14°

S.5568

With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with HIT-CRI 150W G12)

e d a

2893 cd/klm

r t n

STAINLESS STEEL FRONT TRIM

u s . w

49°

S.5573.19 With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with HIT-CRI 150W G12)

70°

418 cd/klm

S.5574.19 With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed 271 cd/klm

7÷38

210

Ømin 255 Ømax 257

Ø 280

15°

S.5577.19 With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 15° 3192 cd/klm

14°

S.5578.19 With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with HIT-CRI 150W G12)

2893 cd/klm

255

MEGAZIP-PLUS SQUARE

DOWNLIGHT

280 mm

ALUMINIUM FRONT TRIM

49°

S.5583 With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with HIT-CRI 150W G12)

69°

418 cd/klm

S.5584 With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed 293 cd/klm

h(m)

Ø(m)

49° Em(lx)

1 2 3 4 5

0.92 1.84 2.76 3.68 4.60

1138 285 126 71 46

h(m)

Ø(m)

69° Em(lx)

1 2 3 4 5

1.38 2.76 4.14 5.52 6.90

148 37 16 9 6

h(m)

Ø(m)

16° Em(lx)

2 4 6 8 10

0.56 1.11 1.67 2.22 2.78

1223 306 136 76 49

h(m)

Ø(m)

14° Em(lx)

2 4 6 8 10

0.48 0.97 1.45 1.94 2.42

2269 567 252 142 91

h(m)

Ø(m)

49° Em(lx)

1 2 3 4 5

0.92 1.84 2.76 3.68 4.60

1138 285 126 71 46

h(m)

Ø(m)

69° Em(lx)

1 2 3 4 5

1.38 2.76 4.14 5.52 6.90

148 37 16 9 6

h(m)

Ø(m)

16° Em(lx)

2 4 6 8 10

0.56 1.11 1.67 2.22 2.78

1223 306 136 76 49

h(m)

Ø(m)

14° Em(lx)

2 4 6 8 10

0.48 0.97 1.45 1.94 2.42

2269 567 252 142 91

7÷38

210

min 255 max 257

280

16°

S.5587 With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 15° 3049 cd/klm

14°

S.5588 With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with HIT-CRI 150W G12)

e d a

a u .

2885 cd/klm

r t n

STAINLESS STEEL FRONT TRIM

u s . w

49°

S.5593.19 With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with HIT-CRI 150W G12)

69°

418 cd/klm

S.5594.19 With lamp TC-T 26W Gx24d-3 1800 lm Lamp position fixed 293 cd/klm

7÷38

210

min 255 max 257

280

16°

S.5597.19 With lamp HIT-CRI 35W G12 3300 lm Lamp position adjustable ± 15° 3049 cd/klm

14°

S.5598.19 With lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (On request with HIT-CRI 150W G12)

256

2885 cd/klm

a u .

m o c

. e d

a r nt

u s . w

257

a u .

m o c

. e d

a r nt

u s . w

FOCUS SUSPENSION

258

a u .

m o c

. e d

a r nt

u s . w

259

FOCUS

速

SUSPENSION

FOCUS SUSPENSION can also be used for interior spaces. The reflectors have been studied with cut-off angles like is needed for in-door luminaires.

Commercial centers, airports and large spaces in general are suitable for FOCUS SUSPENSION. In particular in-door stadium it is important to use a sufficient mechanically strong luminaire, in order to prevent damage during sporting events.

a u .

m o c

. e d

a r nt

FOCUS SUSPENSION has IP66 protection fundamental in environments with high humidity levels, like swimming-pools.

260

u s . w

ÂŽ

FOCUS

SUSPENSION

The steel suspension cable is connected to the fixing base of the luminaire. To facilitate installation, a disconnecting switch immediately interrupts the circuit when the cover is opened.

Detail of the glass diffuser. Its 8 mm thickness provides high protection. This is important when there is a risk of high impact or accidental blows, such as in sports arenas.

a u .

c . e

The diffuser and support ring are hinged onto the projector body.

d a r t n

u s . w

A washer holds the ceiling connection box screws in place. Itâ&#x20AC;&#x2122;s very important hat the screws remain in place when work is being done at great heights during installation and maintenance.

Reflectors are created by SIMES high-precision optics design department. Each model offers high light output.

261

FOCUS SUSPENSION

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 8 mm thick. Stainless steel screws. Steel suspension cable 80 cm length. Luminaire hard wired with cable. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP66 CLASS I



a u .

m o c

. e d

COLOURS: White

(code 01)

Aluminium grey (code 14)

a r nt

COLOURED FILTERS FOR FOCUS SUSPENSION to install inside the fitting.

u s . w

S.1036 S.1037 S.1038 S.1039

Red Blue Yellow Green

COLOURED FILTERS FOR MEGAFOCUS SUSPENSION to install inside the fitting. S.1046 S.1047 S.1048 S.1049

262

Red Blue Yellow Green

Product weight

Version

FOCUS TC-TEL

26W/32W/42W

9,5 kg

FOCUS HIT-CRI

70W

10,5 kg

FOCUS HIT-CRI

150W

11,5 kg

MEGAFOCUS HIT-CRI

250W

19,5 kg

FOCUS SUSPENSION

44°

S.1170 For lamp TC-TEL 26/32/42W Gx24q-3/4 1800/2400/3200 lm With electronic ballast. 722 cd/klm

74°

S.1172 For lamp HIT-CRI 70W G12 6600 lm (30° beam angle available on request) 648 cd/klm

75°

S.1173 For lamp HIT-CRI 150W G12 14000 lm (30° beam angle available on request) 666 cd/klm

h(m)

44° Ø(m) Em(lx)

1 2 3 4 5

0.81 1.62 2.42 3.23 4.04

h(m)

74° Ø(m) Em(lx)

1 2 3 4 5

1.51 3.03 4.54 6.05 7.56

h(m)

75° Ø(m) Em(lx)

1 2 3 4 5

1.53 3.06 4.59 6.12 7.65

654 164 73 41 26

1814 454 202 113 73

4096 1024 455 256 164

Ø 115

m o c

243

440

137

1290

800

a u .

. e d

Ø 250 Ø 290

a r nt

MEGAFOCUS SUSPENSION

u s . w

76°

S.1181 For lamp HIT-CRI 250W G12 23000 lm (30° beam angle available on request) 656 cd/klm

h(m)

76° Ø(m) Em(lx)

1 2 3 4 5

1.53 3.07 4.60 6.14 7.67

7176 1794 797 448 287

325

560

175

1410

800

Ø 115

Ø 330 Ø 385

263

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

265

a u .

m o c

. e d

a r nt

u s . w

FOCUS

266

a u .

m o c

. e d

a r nt

u s . w

267

FOCUS

FOCUS has evolved after careful analysis of the professional lighting designer’s requirements, and comes complete with all the features designers consider indispensable. _ modern design; _ mechanical strength; _ resistance to atmospheric agents; _ superior optical precision; _ absolute visual comfort; _ high light output; _ flexible lighting solutions; _ easy installation and maintenance. FOCUS 6° + antiglare shield The FOCUS range of luminaires provides a superior lighting performance, making it one of the premiere projector ranges in the current exterior market. We have devoted attention to every detail to create a projector with a clear, linear form suitable for all types of design schemes. With a choice of four models and various state-of-the-art light sources, there’s a FOCUS solution for all precise lighting needs, even from long distances.

FOCUS 6° + ellipsoidal lens

FOCUS for HIT-CRI 70W G12 6° + antiglare shield

a u .

FOCUS for HIT-CRI 70W G12 6° + ellipsoidal lens

m o c

. e d

a r nt

u s . w

FOCUS 24° + antiglare shield

FOCUS for HIT-CRI 70W G12 24° + antiglare shield

MICROFOCUS is also offered with the RGB LED, for dynamic light effects.

FOCUS 24° + wide lens

MICROFOCUS with RGB LED

268

FOCUS for HIT-CRI 70W G12 24° + wide lens

FOCUS

速

The tempered glass diffuser is fixed to the aluminium support by silicon resin. The glass is positioned outside the luminaire to keep out water and dirt.

Internal anti-glare shield for visual comfort. It prevents light emission beyond the nominal beam angles. The shield is fixed onto a glass holder frame to save time when changing the lamp.

a u .

c . e

d a r t n

u s . w

The diffuser and support ring are hinged onto the projector. The AISI316 stainless steel connection box screws have a steel anti-loss washer.

You can insert different lenses together inside the optic compartment to modify light distribution. You can also use coloured dichroic filters for further creative effects.

A graduated ferrule allows precise projector aim. With a second screw you can fix the assembly in the desired position.

269

MICROFOCUS

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Clear toughened glass 5 mm thick. Stainless steel screws. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in nickeled brass. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. (LED versions are supplied with LED circuit). IP66 CLASS I (CLASS III

 for RGB LED version)



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14)

a r nt

S.1002

VISOR Colour: black (code 09)

u s . w

S.1003 ADJUSTABLE BARN DOORS Every box S.1003 contains only one flap. To receive the complete system of 4 flaps you have to order n°4 S.1003. Colour: black (code 09) S.5811 - EASY RGB CONTROLLER MASTER/SLAVE CONTROL UNIT IN IP56 BOX 340x260x130 mm. With electronic power supply 30W 240V, sequencer and terminal block for up to 10 luminaires. By a remote infrared control possibility to: 1. Run a pre-programmed RGB colour sequence of 60 sec.(not modificable); 2. Set manually the static desired colour by dimming independently the 3 LED. It is possible to synchronize max 50 luminaires simultaneously by using max 5 BOXES S.5811. S.5814 - ADVANCED RGB CONTROLLER DMX 512 CONTROL UNIT IN IP56 BOX 340x260x130 mm. Supplied with electronic power supply 30W 240V and DMX 512 interface, for max 10 luminaires.. Using a DMX control unit you have the complete control of scenes and colours (So the 10 connected luminaires will be synchronized). With professional DMX control units is possible to manage up to 170 BOXES in synchronized or independent way.

270

S.1000 ELLIPSOIDAL LENS to install inside the fitting. For versions: 50W with 4° and 8° reflector 75W with 10° reflector S.1001 WIDE LENS to install inside the fitting. For versions: 50W with 24° reflector 75W with 30° reflector COLOURED FILTERS to install inside the fitting. Only for QPAR30 75W and QR-LP111 35W versions. S.1006 Red S.1007 Blue S.1008 Yellow S.1009 Green S.1004 STAKE FOR MICROFOCUS in plastic. Colour: black (code .09) EASY DMX SWITCHBOARD S.5721 Simple programmable DMX switchboard that allows to control only 6 groups of fittings, every group for about 20 fittings. (Professional DMX switchboards that allow to control up to 170 groups of fittings, every group for about 20 fittings, available on the market)

MICROFOCUS

S.1054

10°

With RGB ACCENT LED circuit 3W 350mA Circuit with 3 LED 1W 350 mA and 6° beam lens (1 red, 1 green, 1 blue) (Power supply and RGB controller not included)

h(m)

Ø(m)

10° Em(lx)

1 2 3 4 5

0.18 0.36 0.54 0.71 0.89

438 110 49 27 18

S.1055 With ACCENT WHITE LED 3W 240V S.1057 With ACCENT BLUE LED 3W 240V LED RED, LED AMBER and LED GREEN versions available on request

a u .

m o c

. e d

a r nt

S.1050

For lamp QR-LP111 50W 12V With transformer 240V÷12V Lamp with integral reflector, beam angles available: 4°, 8°, 24°

u s . w

S.1051 For lamp QPAR30 75W E27 Lamp with integral reflector, beam angles available: 10°, 30°

271

MINIFOCUS

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 5 mm thick. Stainless steel screws. Double cable entries with PG13,5 (Ø 6÷12 mm) cable glands in nickeled brass. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP66 CLASS I



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14)

a r nt

Double cable entries with PG13,5 (Ø 6÷12 mm) cable glands. Use rubber flexible cables.

u s . w

S.1022 VISOR Colour: black (code 09)

ADJUSTABLE BARN DOORS Every box S.1023 contains only one flap. To receive the complete system of 4 flaps you have to order n°4 S.1023. Colour: black (code 09) S.1005 STAKE FOR MINIFOCUS in plastic. Colour: black (code .09)

MINIFOCUS are not supplied with antiglare shield accessories. These accessories prevent light straying beyond the main beam angle.

272

20W with 5° reflector 35W with 6° reflector S.1021 WIDE LENS to install inside the fitting. For versions: 20W with 26° reflector 35W with 28° reflector

S.1023

PLEASE NOTE

S.1020 ELLIPSOIDAL LENS to install inside the fitting. For versions:

COLOURED FILTERS to install inside the fitting. S.1026 S.1027 S.1028 S.1029

Red Blue Yellow Green

NOTE One lens and one coloured filter can be used together. They must be fixed inside the luminaire.

Light effects of MINIFOCUS 6° with and without antiglare shield S.1024

S.1024

Light effects of MINIFOCUS 28° with and without antiglare shield S.1025

S.1025

ANTIGLARE SHIELD for narrow beams 5°/6°. To install inside the fitting.

ANTIGLARE SHIELD for wide beams 26°/28°. To install inside the fitting.

MINIFOCUS

S.1060

5°

For lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast. (On request 26° beam reflector)

47432 cd/klm

S.1063

6°

For lamp HIT-TC CRI 35W G8,5 3300 lm With electronic ballast. (On request 28° beam reflector)

32595 cd/klm

S.1065 For lamp TC-TEL 18W Gx24q-2 1200 lm With electronic ballast. 72°

432 cd/klm

5°

h(m)

Ø(m)

2 4 6 8 10

0.17 11688 0.35 2922 0.52 1299 0.70 731 0.87 467

h(m)

Ø(m)

2 4 6 8 10

0.20 15620 0.41 3905 0.61 1735 0.81 977 1.01 625

h(m)

72° Ø(m) Em(lx)

1 2 3 4 5

1.48 2.94 4.42 5.88 7.36

6°

Em(lx)

210 52 23 13 8

a u .

m o c

. e d

a r nt

u s . w

273

FOCUS

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 8 mm thick. Stainless steel screws. Double cable entries with PG16 (Ø 10÷14 mm) cable glands in nickeled brass. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP66 CLASS I



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14)

a r nt

Double cable entries with PG16 (Ø 10÷14 mm) cable glands. Use rubber flexible cables.

u s . w

S.1032 VISOR Colour: black (code 09)

S.1030 ELLIPSOIDAL LENS to install inside the fitting. For versions: 70W with 6° reflector 150W with 7° reflector S.1031 WIDE LENS to install inside the fitting. For versions: 70W with 24° reflector 150W with 26° reflector

S.1033 ADJUSTABLE BARN DOORS Every box S.1033 contains only one flap. To receive the complete system of 4 flaps you have to order n°4 S.1033. Colour: black (code 09)

COLOURED FILTERS to install inside the fitting. S.1036 S.1037 S.1038 S.1039

Red Blue Yellow Green

NOTE One lens and one coloured filter can be used together. They must be fixed inside the luminaire.

PLEASE NOTE FOCUS are not supplied with antiglare shield accessories. These accessories prevent light straying beyond the main beam angle.

274

Light effects of FOCUS 6° with and without antiglare shield S.1034

S.1034

Light effects of FOCUS 24° with and without antiglare shield S.1035

S.1035

ANTIGLARE SHIELD for narrow beams 6°/7°. To install inside the fitting.

ANTIGLARE SHIELD for wide beams 24°/26°. To install inside the fitting.

FOCUS

S.1070 For lamp HIT-CRI 70W G12 6600 lm 6°

24089 cd/klm

S.1071 For lamp HIT-CRI 70W G12 6600 lm

24°

3791 cd/klm

S.1073 For lamp HIT-CRI 150W G12 14000 lm

7°

17851 cd/klm

S.1074 For lamp HIT-CRI 150W G12 14000 lm

26°

6°

h(m)

Ø(m)

3 6 9 12 15

0.33 10173 0.65 2543 0.98 1130 1.30 635 1.63 407

h(m)

Ø(m)

24° Em(lx)

2 4 6 8 10

0.85 1.70 2.55 3.40 4.25

3653 914 406 229 146

h(m)

Ø(m)

3 6 9 12 15

0.37 16193 0.73 4048 1.10 1799 1.47 1012 1.84 648

h(m)

Ø(m)

26° Em(lx)

2 4 6 8 10

0.91 1.82 2.73 3.64 4.54

7085 1771 788 443 284

7°

a u .

3388 cd/klm

m o c

Em(lx)

Photometrics measured using OSRAM POWERBALL lamp

. e d

a r nt

S.1013

FLANGE FOR POLE INSTALLATION

u s . w

Flange in die-cast aluminium for FOCUS, suitable only for Ø 120 mm poles. The flange can be used for maximum 2 projectors, one for each side.

Example of FOCUS attached on pole by using the accessory FLANGE S.1013.

275

MEGAFOCUS

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 8 mm thick. Stainless steel screws. Double cable entries with PG16 (Ø 10÷14 mm) cable glands in nickeled brass. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP66 CLASS I



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14)

a r nt

Double cable entries with PG16 (Ø 10÷14 mm) cable glands. Use rubber flexible cables.

u s . w

S.1042 VISOR Colour: black (code 09)

S.1040 ELLIPSOIDAL LENS to install inside the fitting. For versions: 140W with 6° reflector 250W with 7° reflector S.1041 WIDE LENS to install inside the fitting. For versions: 140W with 30° reflector 250W with 30° reflector

S.1043 ADJUSTABLE BARN DOORS Every box S.1043 contains only one flap. To receive the complete system of 4 flaps you have to order n°4 S.1043. Colour: black (code 09)

COLOURED FILTERS to install inside the fitting. S.1046 S.1047 S.1048 S.1049

Red Blue Yellow Green

NOTE One lens and one coloured filter can be used together. They must be fixed inside the luminaire.

PLEASE NOTE MEGAFOCUS are not supplied with antiglare shield accessories. These accessories prevent light straying beyond the main beam angle.

276

Light effects of MEGAFOCUS 7° with and without antiglare shield S.1044

S.1044

Light effects of MEGAFOCUS 30° with and without antiglare shield S.1045

S.1045

ANTIGLARE SHIELD for narrow beams 7°. To install inside the fitting.

ANTIGLARE SHIELD for wide beams 30°. To install inside the fitting.

MEGAFOCUS

S.1080 For lamp HIT-CRI 250W G12 23000 lm

7°

S.1081 For lamp HIT-CRI 250W G12 23000 lm

30° S.1086 For lamp COSMOWHITE 140W PGZ 12 16500 lm

6° S.1087 For lamp COSMOWHITE 140W PGZ 12 16500 lm

a u .

30°

m o c

* Photometrics measured using PHILIPS MASTERCOLOR CDM-T lamp

. e d

a r nt

u s . w

277

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

279

a u .

m o c

. e d

a r nt

u s . w

TECHNO

280

a u .

m o c

. e d

a r nt

u s . w

281

TECHNO

All TECHNO luminaires have accessories to model the beam angle. It is possible to illuminate objects in a precise way by limiting the light dispersion using wide and ellipsoidal beam lenses. The simulations are the result of a lighting calculation, carried out using MINITECHNO SPOT HIT-TC CRI 35W.

8° REFLECTOR

a u .

8° REFLECTOR + ellipsoidal beam lens

. e d

m o c

a r nt

u s . w

22° REFLECTOR

22° REFLECTOR + wide beam lens

282

TECHNO

速

You can reach the lamp by simply removing the front ring and the 4 mm thick protective glass. The silicone gasket assure an IP65 proof seal.

a u .

c . e

d a r t n

u s . w

Power supply connection takes place by means of a disconnecting switch. This facilitates installation on walls because you can attach the base and do the wiring, positioning the complete unit at the end of the installation.

Aiming the light is trouble-free, thanks to a graduated ferrule. This is particularly important when using more projectors that must illuminate in the same direction.

A wide range of accessories allows a lot of uses to meet various requirements.

283

MICROTECHNO SPOT

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 4 mm thick. Stainless steel screws. Single cable entry. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS I



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey (code 24)

a r nt

COLOURED FILTERS supplied with aluminium ring holders. S.3526 S.3527 S.3528 S.3529

u s . w

Red Blue Yellow Green

S.3520 PROTECTIVE GRILL in die-cast aluminium. To be installed instead of the aluminium ring holder. S.3523 VISOR in die-cast aluminium. To be installed instead of the aluminium ring holder. S.3524 STAKE in plastic. Colour: black (code 09) Length = 270 mm It protrudes from the ground 90 mm.

284

POSSIBLE COMBINATIONS OF ACCESSORIES Grill + Wide lens Grill + Ellipsoidal lens Visor + Wide lens Visor + Ellipsoidal lens Wide lens + Coloured filters Ellipsoidal lens + Coloured filters S.3500 WIDE BEAM LENS It enlarges the standard beam: 40W from 26° to ~ 36° 35W from 18° to ~ 36° 20W from 18° to ~ 38° S.3501 ELLISPOIDAL BEAM LENS It modifies the beam: 35W from 8° to ~ 20°x60° 20W from 8° to ~ 8°x52°

MICROTECHNO SPOT

MICROTECHNO LED

S.3595 With ACCENT WHITE LED 3x1W 240V S.3597

10°

With ACCENT BLUE LED 3x1W 240V

h(m)

Ø(m)

10° Em(lx)

1 2 3 4 5

0.18 0.36 0.54 0.71 0.89

438 110 49 27 18

LED RED, LED AMBER and LED GREEN versions available on request

a u .

m o c

. e d

a r nt

MICROTECHNO

S.3540

For lamp QPAR16 40W E14 25° Lamp with integral reflector

u s . w 26°

S.3542

18°

For lamp QT12 35W 12V GY6,35 600 lm With electronic transformer 50VA 240V÷12V (8° beam reflector on request)

S.3546

S.3540 S.3542

18°

For lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast (8° beam reflector on request)

S.3546

285

MINITECHNO SPOT



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey (code 24)

a r nt

COLOURED FILTER supplied with aluminium ring holders. S.3506 S.3507 S.3508 S.3509

u s . w

Red Blue Yellow Green

S.3550 PROTECTIVE GRILL in die-cast aluminium. To be installed instead of the aluminium ring holder. S.3553 VISOR in die-cast aluminium. To be installed instead of the aluminium ring holder. S.3554 STAKE in plastic. Colour: black (code 09) Length = 420 mm It protrudes from the ground 90 mm.

286

POSSIBLE COMBINATIONS OF ACCESSORIES Grill + Wide lens Grill + Ellipsoidal lens Visor + Wide lens Visor + Ellipsoidal lens Wide lens + Coloured filters Ellipsoidal lens + Coloured filters S.3504 WIDE BEAM LENS It enlarges the standard beam: 75W from 28° to ~ 50° 50W from 24° to ~ 40° 35W from 22° to ~ 40° S.3502 ELLIPSOIDAL BEAM LENS It modifies the standard beam: 75W from 8° to ~ 12°x56° 50W from 6° to ~ 14°x50° 35W from 8° to ~ 14°x50°

MINITECHNO SPOT

S.3560 For lamp QPAR25 75W E27 Lamp with integral reflector, beam angles available: 10°, 25°

28° S.3562 For lamp QT12 50W 12V GY6,35 With transformer 60VA 240V÷12V (6° beam reflector on request)

24°

S.3566

S.3560 S.3562

For lamp HIT-TC CRI 35W G8,5 3300 lm (8° beam reflector on request)

350°

22° * Photometrics measured using PHILIPS CDM-TC lamp

S.3566

a u .

350°

m o c

. e d

a r nt

S.3580

For lamp QPAR25 75W E27 Lamp with integral reflector, beam angles available: 10°, 25°

u s . w 28°

S.3582

For lamp QT12 50W 12V GY6,35 With transformer 60VA 240V÷12V (6° beam reflector on request)

24°

350°

S.3586

For lamp HIT-TC CRI 35W G8,5 3300 lm (8° beam reflector on request)

22° * Photometrics measured using PHILIPS CDM-TC lamp

287

TECHNO SPOT

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 4 mm thick. Stainless steel screws. Single cable entry with PG13,5 cable gland. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS I



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey (code 24)

a r nt

COLOURED FILTER supplied with aluminium ring holders. S.3556 S.3557 S.3558 S.3559

u s . w

Red Blue Yellow Green

S.3551 PROTECTIVE GRILL in die-cast aluminium. To be installed instead of the aluminium ring holder. S.3552

POSSIBLE COMBINATIONS OF ACCESSORIES Grille + Wide lens Grille + Ellipsoidal lens Visor + Wide lens Visor + Ellipsoidal lens Wide lens + Coloured filters Ellipsoidal lens + Coloured filters S.3503 WIDE BEAM LENS It enlarges the standard beam:

VISOR in die-cast aluminium.

70W from 58° to ~ 74° 70W from 30° to ~ 42° 150W from 30° to ~ 44°

S.3554

S.3505 ELLIPSOIDAL BEAM LENS It modifies the standard beam:

STAKE in plastic. Colour: black (code 09) Length = 420 mm It protrudes from the ground 90 mm.

75W from 10° to ~ 22°x68° 150W from 16° to ~ 24°x70°

S.3555 ANTIGLARE SHIELD For versions: HIT-CRI 70W 10° HIT-CRI 150W 16° 10° without antiglare shield

288

10° with antiglare shield

It improves the light beam control, prevents light straying beyond the main beam angles 10°/16°.

TECHNO SPOT

S.3510 For lamp QT32 250W E27 4200 lm 48°

S.3514 For lamp HST-MF 70W E27 6500 lm 58°

S.3517

350°

For lamp HIT-CRI 70W G12 6600 lm (10° beam reflector on request) 30°

S.3518 For lamp HIT-CRI 150W G12 14000 lm (16° beam reflector on request)

a u .

30°

m o c

. e d

a r nt

S.3530

For lamp QT32 250W E27 4200 lm

u s . w 48°

S.3534

For lamp HST-MF 70W E27 6500 lm

58°

S.3537 For lamp HIT-CRI 70W G12 6600 lm (10° beam reflector on request) 30°

S.3538 350°

For lamp HIT-CRI 150W G12 14000 lm (16° beam reflector on request) 30°

289

TECHNO RECTANGULAR FLOOD

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 4 mm thick. Stainless steel screws. Double cable entries with PG16 cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS II

 for MINITECHNO

CLASS I for TECHNO



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14)

a r nt

MINITECHNO RECTANGULAR FLOOD

290

COLOURED FILTERS supplied with aluminium ring holders

S.3786 S.3787 S.3788 S.3789

S.3706 S.3707 S.3708 S.3709

u s . w

TECHNO RECTANGULAR FLOOD

Red Blue Yellow Green

S.3780

S.3700

PROTECTIVE GRILL in die-cast aluminium. To be installed instead of the aluminium ring holder.

S.3781

S.3701

VISOR in painted steel with die-cast aluminium ring holder. To be installed instead of the aluminium ring holder.

S.3783

S.3703

WIDE BEAM LENS

TECHNO RECTANGULAR FLOOD

MINITECHNO RECTANGULAR FLOOD

S.3750 For lamp QT-DE12 300W R7s 5000 lm C0 70° C90 70°

CLASS II



S.3756 For lamp HIT-DE 70W Rx7s 6500 lm C0 70° C90 76°

CLASS II



S.3760 For lamp QT-DE12 300W R7s 5000 lm CLASS II C0 34°+30° C90 68°



S.3766 For lamp HIT-DE 70W Rx7s 6500 lm CLASS II C0 31°+31° C90 68°

a u .



m o c

a r nt

TECHNO RECTANGULAR FLOOD

S.3718

For lamp HIT-DE 150W Rx7s 13250 lm CLASS I

u s . w C0 70° C90 76°

S.3719

. e d

C0 70° C90 76°

For lamp HIT-DE 250W Fc2 20000 lm CLASS I

S.3728 For lamp HIT-DE 150W Rx7s 13250 lm CLASS I C0 31°+31° C90 68°

S.3729 For lamp HIT-DE 250W Fc2 20000 lm CLASS I C0 31°+31° C90 68°

METAL HALIDE

SODIUM

MINITECHNO S.3756, S.3766, for metal halide lamp HIT-DE 70W Rx7s and TECHNO S.3718, S.3728, for metal halide lamp HIT-DE 150W Rx7s can also use high pressure sodium lamps HST-DE 70W or 150W Rx7s working with the same gear.

291

TECHNO RECTANGULAR SPOT

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 4 mm thick. Stainless steel screws. Double cable entries with PG16 cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS II

 for MINITECHNO

CLASS I for TECHNO



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14)

a r nt

MINITECHNO RECTANGULAR SPOT

COLOURED FILTERS supplied with aluminium ring holders

S.3796 S.3797 S.3798 S.3799

S.3746 S.3747 S.3748 S.3749

u s . w

TECHNO RECTANGULAR SPOT

Red Blue Yellow Green

S.3753

S.3703

WIDE BEAM LENS It enlarges the standard beam:

70W from 24° to ~ 38°

150W from 24° to ~ 50°

S.3755

S.3705

ELLIPSOIDAL BEAM LENS It modifies the standard beam:

70W from 6° to ~ 10°x56°

292

Red Blue Yellow Green

150W from 6° to ~ 10°x64°

S.5500

ANTIGLARE SHIELD

Only for 6°/8° beam versions.

Only for 6° beam version.

TECHNO RECTANGULAR SPOT

MINITECHNO RECTANGULAR SPOT

S.3732 For lamp HIT-TC CRI 70W G8,5 6600 lm (On request for HIT-TC CRI 35W G8,5) 6°

CLASS II



S.3734 For lamp HIT-TC CRI 70W G8,5 6600 lm (On request for HIT-TC CRI 35W G8,5) 24° 215

CLASS II

 Photometrics measured using OSRAM HCI-TC lamps

370

125

100°

90°

a u .

m o c

. e d

a r nt

TECHNO RECTANGULAR SPOT

S.3738

For lamp HIT-CRI 150W G12 14000 lm CLASS I

u s . w 6°

S.3739

w 250

For lamp HIT-CRI 150W G12 14000 lm CLASS I

24° Photometrics measured using PHILIPS CDM-T lamp

440

140

90°

100°

293

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

295

a u .

m o c

. e d

a r nt

u s . w

WIP

296

a u .

m o c

. e d

a r nt

u s . w

297

WIP

速

WIP projectors are the right solution for uniform lighting. In the examples shown we have illuminated a walkway in 3 differents ways: _ with direct illumination; _ indirect illumination on the ceiling; _ indirect illumination on the wall.

A60 100W E27

The indirect illumination on the ceiling emphasise the overall space while still achieving a good lighting level on the ground.

RENDERING - S.4301 WIP INCANDESCENT

a u .

m o c

. e d

a r nt

With WIP WITH ARM you can light up signs or walls.

u s . w

HIT-DE 70W Rx7s

RENDERING - S.4316 WIP METAL HALIDE

HIT-DE 70W Rx7s

298

RENDERING - S.4326 WIP WITH ARM

WIP

速

In the metal halide models, the lamp is physically separated from the electrical components.

Fins on the cover and the back of the accessory box increase heat dissipation for longer product life.

a u .

m o c

. e d

a r nt

u s . w

The luminaire is easily adjusted along the vertical axis.

299

WIP APPLIQUE

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Toughened acid etched glass diffuser. Stainless steel screws. Double cable entries. Dutral gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS I



a u .

m o c

. e d

COLOURS: Black

(code 09)

Aluminium grey (code 14)

a r nt

WIP APPLIQUE fittings with ROUND OPTIC can use the accessory protective grill.

u s . w

300

S.4344 PROTECTIVE GRILL Colours: black (code 09) aluminium grey (code 14)

WIP APPLIQUE

RECTANGULAR OPTIC

S.4301 For lamp A60 100W E27 1380 lm C0 80° C90 108°

S.4309 For lamp TC-D 18W G24d-2 1200 lm C0 90° C90 96°

a u .

m o c

. e d

a r nt

ROUND OPTIC

S.4341

For lamp A60 100W E27 1380 lm

u s . w C0 82° C90 90°

S.4349

For lamp TC-D 18W G24d-2 1200 lm

84°

301

WIP FLOODLIGHT

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Toughened acid etched glass diffuser. Faceted aluminium reflector. Stainless steel screws. Double cable entries with PG13,5 cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS I



a u .

m o c

. e d

COLOURS: Black

(code 09)

Aluminium grey (code 14) METAL HALIDE

u s . w

302

a r nt

SODIUM

S.4316 and S.4326, for metal halide lamp HIT-DE 70W Rx7s and S.4318 and S.4328, for metal halide lamp HIT-DE 150W Rx7s can also use high pressure sodium lamps HST-DE 70W or 150W Rx7s working with the same gear.

WIP FLOODLIGHT

S.4311 For lamp QT-DE12 300W R7s 5000 lm C0 74° C90 86°

S.4319 For lamp TC-T 26W Gx24d-3 1800 lm C0 88° C90 94° 105

230

290

135°

45°

a u .

m o c

S.4316 For lamp HIT-DE 70W Rx7s 6500 lm C0 74° C90 86°

. e d

a r nt

S.4318

For lamp HIT-DE 150W Rx7s 13250 lm

u s . w C0 70° C90 82°

105

230

12°

320

95°

S.4321 For lamp QT-DE12 300W R7s 5000 lm C0 74° C90 86°

S.4326 For lamp HIT-DE 70W Rx7s 6500 lm C0 74° C90 86°

S.4328

730 105

For lamp HIT-DE 150W Rx7s 13250 lm 95° 45°

C0 70° C90 82°

303

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

305

a u .

m o c

. e d

a r nt

u s . w

306

IBIZA

a u .

m o c

. e d

a r nt

u s . w

307

IBIZA

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Toughened acid etched glass diffuser 3 mm thick. Stainless steel screws. Double cable entries. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP20 CLASS I



a u .

m o c

COLOURS: White

(code 01)

Black

(code 09)

. e d

Aluminium grey (code 14)

a r nt

S.4050

u s . w

308

ADJUSTABLE BARN DOORS in painted steel. Colour: black (code 09)

IBIZA

C0 60° C90 82°

S.4011 For lamp QT-DE12 200W R7s 3200 lm

a u .

m o c

C0 70° C90 80°

. e d

a r nt

S.4016

For lamp HIT-DE 70W Rx7s 6500 lm

u s . w

309

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

311

a u .

m o c

. e d

a r nt

u s . w

REEF

312

a u .

m o c

. e d

a r nt

u s . w

313

REEF

REEF has excellent light control and offers many flexible solutions for different types of applications, with particular attention to its mechanical strength and vandal-proof resistance. With metal halide lamp it provides high visible comfort, as there is no glare from any possible viewing angle.

HIT-TC CRI 20W G8,5

RENDERING - MINIREEF 180° - HIT-TC CRI 20W G8,5

a u .

m o c

. e d

a r nt

A unique solution is REEF MUSICAL BOLLARD, a combination of light and music: by installing a PROFESSIONAL SPEAKER into the aluminium bollard light and music, or microphone announcements, can be made.

u s . w

HIT-TC CRI 70W G8,5

314

RENDERING - REEF 360° - HIT-TC CRI 70W G8,5

RENDERING - REEF MUSICAL BOLLARD 180° - HIT-TC CRI 70W G8,5

REEF

MINIREEF is the diminutive bollard with full optical control. It’s a discrete luminaire with a clean design and a height of only 180 mm and 190 mm diameter. Suitable for residential areas and urban spaces where CLASS II fittings are required. MINIREEF’s optical system with metal halide lamps comprises two reflectors in aluminium (99.98% pure) which provide exceptional visual comfort and high light output with a soft diffusion and a uniform light distribution. The polycarbonate diffuser is UV-stabilised and vandalproof.

MINIREEF and REEF can be wall mounted, producing amazing light patterns.

a u .

m o c

. e d

a r nt

u s . w

MINIREEF MUSICAL BOLLARD includes a standard REEF luminaire and a high-quality loud speaker, placed in the bollard. Both have IP65 ratings for water impermeability. The speaker can be connected to standard HI-FI systems like those used in private homes, as well as to large professional systems, such as those used in discos, shopping malls or other venues for public entertainment.

315

MINIREEF

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear polycarbonate diffuser. Stainless steel screws. Double cable entries with grommets (Ø 7÷13 mm). Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS II



a u .

m o c

20 Joule impact.

. e d

COLOUR: Aluminum grey

(code 14)

a r nt

S.5200

FLANGE ACCESSORY FOR GROUND APPLICATION

u s . w

Ø 190 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.

316

S.3554 STAKE in plastic for temporary applications. Colour: black (code 09) Total length = 420 mm. The 90 mm upper part must stay above ground level, according to the norm.

MINIREEF

MINIREEF 12 WINDOWS

S.5201 lux

With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast 226 cd/klm

S.5202 lux

With lamp TC-T 18W Gx24d-2 1200 lm 51 cd/klm

a u .

m o c

. e d

a r nt

MINIREEF 360°

S.5211

lux

With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast.

u s . w

198 cd/klm

S.5212 lux

With lamp TC-T 18W Gx24d-2 1200 lm 59 cd/klm

317

MINIREEF

MINIREEF WITH GRID

S.5214 lux

With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast 40 cd/klm

S.5215 lux

With lamp TC-T 18W Gx24d-2 1200 lm 27 cd/klm

a u .

MINIREEF 2 x 90°

m o c

S.5221 With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast

. e d

a r nt

S.5222

281 cd/klm

lux

With lamp TC-T 18W Gx24d-2 1200 lm

u s . w

lux

68 cd/klm

MINIREEF 180°

S.5231 lux

With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast. 243 cd/klm

S.5232 lux

With lamp TC-T 18W Gx24d-2 1200 lm 68 cd/klm

318

a u .

m o c

. e d

a r nt

u s . w

319

MINIREEF BOLLARD

速

MINIREEF BOLLARD WITH GRID

S.5224 With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast

lux

40 cd/klm

S.5225 With lamp TC-T 18W Gx24d-2 1200 lm

lux

27 cd/klm

a u .

MINIREEF BOLLARD 12 WINDOWS

m o c

S.5271 With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast

a r nt

. e d

S.5272

226 cd/klm

With lamp TC-T 18W Gx24d-2 1200 lm

u s . w

320

lux

51 cd/klm

MINIREEF BOLLARD

MINIREEF BOLLARD 360°

S.5241 lux

With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast 198 cd/klm

S.5242 With lamp TC-T 18W Gx24d-2 1200 lm

lux

59 cd/klm

a u .

MINIREEF BOLLARD 2 x 90°

S.5251

c . e

With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast

r t n

S.5252

281 cd/klm

lux

With lamp TC-T 18W Gx24d-2 1200 lm

u s . w

lux

68 cd/klm

MINIREEF BOLLARD 180°

S.5261

lux

With lamp HIT-TC CRI 20W G8,5 1700 lm With electronic ballast 243 cd/klm

S.5262 lux

With lamp TC-T 18W Gx24d-2 1200 lm 68 cd/klm

321

REEF

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear polycarbonate lens with controlled downward light emission for avoiding any glare. Stainless steel screws. Double cable entries with PG16 (Ø 10÷14 mm) cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS II



a u .

m o c

20 Joule impact.

. e d

COLOUR: Aluminum grey

(code 14)

a r nt

S.5203

FLANGE ACCESSORY FOR GROUND APPLICATION

u s . w

Ø 250 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.

322

S.3554 STAKE in plastic for temporary applications. Colour: black (code 09) Total length = 420 mm. The 90 mm upper part must stay above ground level, according to the norm.

REEF

REEF 360°

S.5216 lux

With lamp HIT-TC CRI 35W G8,5 3300 lm 202 cd/klm

S.5218

lux

With lamp HIT-TC CRI 70W G8,5 6600 lm 163 cd/klm

S.5219 With lamp TC-T 26W Gx24d-3 1800 lm

lux

61 cd/klm

a u .

REEF 2 x 90°

m o c

S.5226 With lamp HIT-TC CRI 35W G8,5 3300 lm

. e d

a r nt

S.5228

lux

199 cd/klm

lux

With lamp HIT-TC CRI 70W G8,5 6600 lm

u s . w

149 cd/klm

S.5229

lux

With lamp TC-T 26W Gx24d-3 1800 lm 80 cd/klm

REEF 180°

S.5236 lux

With lamp HIT-TC CRI 35W G8,5 3300 lm 206 cd/klm

S.5238 lux

With lamp HIT-TC CRI 70W G8,5 6600 lm 170 cd/klm

S.5239 lux

With lamp TC-T 26W Gx24d-3 1800 lm 61 cd/klm

323

REEF BOLLARD

Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear polycarbonate lens with controlled downward light emission for avoiding any glare. Stainless steel screws. Double cable entries with PG16 (Ø 10÷14 mm) cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp included. IP65 CLASS II



a u .

m o c

20 Joule impact.

. e d

COLOUR: Aluminum grey

(code 14)

a r nt

S.5203

FLANGE ACCESSORY FOR GROUND APPLICATION

u s . w

Ø 250 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.

LIGHT AND MUSIC REEF MUSICAL BOLLARD REEF bollard and omnidirectional outdoor speaker with 30W RMS loudspeaker system and 100V 20W transformer. POSSIBLE CONNECTIONS 1) To a standard stereo system for maximum 4 bollards; 2) To a 100V audio system for more than 4 bollards.

324

SPEAKER CHARACTERISTICS 2 way omnidirectional outdoor speaker with 5” woofer and dome tweeter with 3 Khz crossover frequency. Operating range: 65Hz - 17.000Hz. Dispersion in the middle wave range: 360° horizontal - 45° vertical. Sensitivity 1W/1m 82dB. Input: 8 ohm 30 W 100V 20 W 100V 10 W 100V 5 W

REEF BOLLARD

REEF BOLLARD 360°

S.5248 lux

With lamp HIT-TC CRI 70W G8,5 6600 lm 163 cd/klm

S.5249 With lamp TC-T 26W Gx24d-3 1800 lm

lux

61 cd/klm

a u .

REEF BOLLARD 2 x 90°

S.5258

c . e

With lamp HIT-TC CRI 70W G8,5 6600 lm

r t n

S.5259

149 cd/klm

lux

With lamp TC-T 26W Gx24d-3 1800 lm

u s . w

lux

80 cd/klm

REEF BOLLARD 180°

S.5268

lux

With lamp HIT-TC CRI 70W G8,5 6600 lm 170 cd/klm

S.5269 lux

With lamp TC-T 26W Gx24d-3 1800 lm 61 cd/klm

325

REEF MUSICAL BOLLARD

REEF MUSICAL BOLLARD 360°

S.5278 lux

With lamp HIT-TC CRI 70W G8,5 6600 lm (With acoustic diffuser 30W 8Ω) 163 cd/klm

S.5279 With lamp TC-T 26W Gx24d-3 1800 lm (With acoustic diffuser 30W 8Ω)

lux

61 cd/klm

a u .

REEF MUSICAL BOLLARD 2 x 90°

S.5288

c . e

With lamp HIT-TC CRI 70W G8,5 6600 lm (With acoustic diffuser 30W 8Ω)

r t n

S.5289

lux

149 cd/klm

lux

With lamp TC-T 26W Gx24d-3 1800 lm (With acoustic diffuser 30W 8Ω)

u s . w

80 cd/klm

REEF MUSICAL BOLLARD 180°

S.5298

lux

With lamp HIT-TC CRI 70W G8,5 6600 lm (With acoustic diffuser 30W 8Ω) 170 cd/klm

S.5299 lux

With lamp TC-T 26W Gx24d-3 1800 lm (With acoustic diffuser 30W 8Ω) 61 cd/klm

326

a u .

m o c

. e d

a r nt

u s . w

327

a u .

m o c

. e d

a r nt

u s . w

CUBIKS

328

a u .

m o c

. e d

a r nt

u s . w

329

CUBIKS

Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened reeded glass. Stainless steel screws. Luminaire hard wired with rubber cable. Electrical wiring with fast connector IP67. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS I



a u .

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey

(code 24)

a r nt

S.5310

FLANGE ACCESSORY FOR CUBIKS

u s . w

Ø 180 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.

S.5350 FLANGE ACCESSORY FOR MEGACUBIKS Ø 240 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.

CUBIKS and MEGACUBIKS are supplied with rubber cable and IP67 fast connector. The connector must be connected at the supply line (Ø 12÷16 mm).

SPECIAL VERSIONS: On request CUBIKS and MEGACUBIKS bollards can be supplied also in 1 WINDOW version or 2 WINDOWS 180° version.

330

CUBIKS

CUBIKS 4 WINDOWS h=35 cm.

S.5331

H = 35 cm

For lamp HIT-TC CRI 35W G8,5 3300 lm 4 wide beams 80°

lux

350

148 cd/klm

180

a u .

m o c

. e d

a r nt

CUBIKS 4 WINDOWS h=80 cm.

S.5336

H = 80 cm lux

For lamp HIT-TC CRI 35W G8,5 3300 lm 4 wide beams 80°

u s . w 800

148 cd/klm

180

331

MEGACUBIKS

MEGACUBIKS 4 WINDOWS h=45 cm.

S.5371

H = 45 cm lux

For lamp HIT-CRI 70W G12 6600 lm 4 wide beams 90° 450

134 cd/klm

240

a u .

m o c

. e d

a r nt

MEGACUBIKS 4 WINDOWS h=95 cm.

S.5376

H = 95 cm lux

For lamp HIT-CRI 70W G12 6600 lm 4 wide beams 90°

u s . w

950

240

332

134 cd/klm

a u .

m o c

. e d

a r nt

u s . w

333

a u .

m o c

. e d

a r nt

u s . w

COLUMN

334

a u .

m o c

. e d

a r nt

u s . w

335

COLUMN

Luminaires with a 45° grill provide sufficient light levels up to 3÷4 m spacings.

HIT-CE/S 70W

The three-windows versions have a louvre that obscures direct view of the lamp. This ensures perfect ground illumination up to 6÷7 m spacings without glare.

S.4196 WHIT 45° GRILL

a u .

m o c

. e d

a r nt

The simulation shows the importance of a COLUMN installation providing orientation and pathway lighting. Illumination is diffuse and glare free.

u s . w

HIT-CE/S 70W

336

S.4186 - 3 WINDOWS

COLUMN

With a polycarbonate diffuser stabilized by UV rays, and A4 stainless steel screws, COLUMN is engineered for maximum strength. Electrical connection to an external line takes place in the plastic IP55 cable box, located in the aluminium tube. The box contains a terminal block that allows the addition of tri-phase cable connections, as well as fuse protection. The cable box is attached to a plastic connection box which contains all necessary components. All components are double-insulated for CLASS II classification. Cable box access is facilitated by an inspection door. A strong counter-flange anchors the luminaire to the ground. It must be secured by a sufficiently sized concrete plinth.

a u .

m o c

. e d

a r nt

u s . w

337

MINICOLUMN

Ø 140 mm

Extruded EN AW-6060 aluminium profile. Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Polycarbonate vandalproof diffuser. Stainless steel screws. Electrical wiring with fast connector IP65. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS II



a u .

m o c

. e d

COLOURS: Black

(code 09)

Aluminium grey (code 14)

a r nt

MINICOLUMN is supplied with rubber cable and fast connector. The connector must be connected at the supply line (Ø 6÷8,5 mm).

u s . w

S.4172 FLANGE ACCESSORY FOR MINICOLUMN Ø 140 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground. Available on request the provision of screening one or two windows.

338

MINICOLUMN WITH GRILL 45°

The light distribution is in accordance with light pollution regulations.

MINICOLUMN

MINICOLUMN h=36 cm.

S.4182

Ø 140 mm

H = 0.36 m

lux

For lamp TC-T 18W Gx24d-2 1200 lm (Use only OSRAM lamps)

MINICOLUMN h=80 cm.

S.4180

H = 0.8 m lux

For lamp TC-T 18W Gx24d-2 1200 lm (Use only OSRAM lamps)

S.4181

H = 0.8 m

For lamp HIT-CRI 35W G12 3300 lm

lux

a u .

m o c

. e d

a r nt

MINICOLUMN h=36 cm.

u s . w

MINICOLUMN h=80 cm.

S.4192

H = 0.36 m lux

For lamp TC-T 18W Gx24d-2 1200 lm (Use only OSRAM lamps)

S.4190

H = 0.8 m

lux

H = 0.8 m

lux

For lamp TC-T 18W Gx24d-2 1200 lm (Use only OSRAM lamps)

S.4191 For lamp HIT-CRI 35W G12 3300 lm

339

MINICOLUMN

Ø 140 mm

MINICOLUMN h=36 cm.

S.4152

H = 0.36 m

lux

For lamp TC-T 18W Gx24d-2 1200 lm (Use only OSRAM lamps)

MINICOLUMN h=80 cm.

S.4150

H = 0.8 m lux

For lamp TC-T 18W Gx24d-2 1200 lm (Use only OSRAM lamps)

S.4151

H = 0.8 m

For lamp HIT-CRI 35W G12 3300 lm

lux

a u .

m o c

. e d

a r nt

MINICOLUMN h=36 cm.

u s . w

MINICOLUMN h=80 cm.

S.4162

H = 0.36 m

lux

For lamp TC-T 18W Gx24d-2 1200 lm (Use only OSRAM lamps)

S.4160

H = 0.8 m

lux

For lamp TC-T 18W Gx24d-2 1200 lm (Use only OSRAM lamps)

S.4161 For lamp HIT-CRI 35W G12 3300 lm

340

H = 0.8 m

lux

a u .

m o c

. e d

a r nt

u s . w

341

COLUMN

Ø 200 mm

Extruded EN AW-6060 aluminium profile. Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Polycarbonate vandalproof diffuser. Stainless steel screws. Door for electrical inspections and connection box with fuses. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS II



a u .

m o c

. e d

COLOURS: Black

(code 09)

Aluminium grey (code 14)

a r nt

COLUMN h 95 cm and h 2.5 m With door for electrical inspections and connection box with fuses.

u s . w

COLUMN WITH GRILL 45°

The light distribution is in accordance with light pollution regulations.

COLUMN h 47 cm Is supplied with rubber cable and fast connector (Ø 6÷8,5 mm). (Without door for electrical inspections and connection box with fuses).

S.4171 FLANGE ACCESSORY FOR COLUMN Ø 195 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.

METAL HALIDE

SODIUM

Available on request the provision of screening one or two windows.

COLUMN for metal halide HIT-CE/S 70W E27 lamp can also use high pressure sodium HST-MF 70W E27 lamp working with the same gear.

342

COLUMN

COLUMN h=47 cm.

Ø 200 mm

S.4186

ROUNDED HEAD

H = 0.47 m lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

S.4189

H = 0.47 m

lux

For lamp TC-T 26W Gx24d-3 1800 lm (Use only OSRAM and PHILIPS lamps) COLUMN h=95 cm.

S.4185

H = 0.95 m lux

For lamp TC-T 26W Gx24d-3 1800 lm (Use only OSRAM and PHILIPS lamps)

S.4188

H = 0.95 m

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

lux

a u .

m o c

a r nt

. e d

COLUMN h=2.5 m.

S.4184

H = 2.5 m

lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

u s . w

343

COLUMN

Ø 200 mm

ROUNDED HEAD 45°

COLUMN h=47 cm.

S.4196

H = 0.47 m

lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

S.4199

H = 0.47 m

lux

For lamp TC-T 26W Gx24d-3 1800 lm (Use only OSRAM and PHILIPS lamps) COLUMN h=95 cm.

S.4195

H = 0.95 m lux

For lamp TC-T 26W Gx24d-3 1800 lm (Use only OSRAM and PHILIPS lamps)

S.4198

H = 0.95 m lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

a u .

m o c

a r nt

. e d

COLUMN h=2.5 m.

S.4194

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

u s . w

344

H = 2.5 m

lux

COLUMN

COLUMN h=47 cm.

Ø 200 mm

S.4156

POINTED HEAD

H = 0.47 m lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

S.4159

H = 0.47 m lux

For lamp TC-T 26W Gx24d-3 1800 lm (Use only OSRAM and PHILIPS lamps) COLUMN h=95 cm.

S.4155

H = 0.95 m lux

For lamp TC-T 26W Gx24d-3 1800 lm (Use only OSRAM and PHILIPS lamps)

S.4158

H = 0.95 m lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

a u .

m o c

a r nt

. e d

COLUMN h=2.5 m.

S.4154

H = 2.5 m

lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

u s . w

345

COLUMN

Ø 200 mm

POINTED HEAD 45°

COLUMN h=47 cm.

S.4166

H = 0.47 m lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

S.4169

H = 0.47 m

lux

For lamp TC-T 26W Gx24d-3 1800 lm (Use only OSRAM and PHILIPS lamps) COLUMN h=95 cm.

S.4165

H = 0.95 m

lux

For lamp TC-T 26W Gx24d-3 1800 lm (Use only OSRAM and PHILIPS lamps)

S.4168

H = 0.95 m lux

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

a u .

m o c

a r nt

. e d

COLUMN h=2.5 m.

S.4164

For lamp HIT-CE/S 70W E27 6300 lm (Use only PHILIPS CDO-TT lamp)

u s . w

346

H = 2.5 m

lux

a u .

m o c

. e d

a r nt

u s . w

347

a u .

m o c

. e d

a r nt

u s . w

JET

348

a u .

m o c

. e d

a r nt

u s . w

349

JET

速

JET is a cylindrical projector for creating vertical accent lighting. It has a number of anti-vandalism characteristics, making it ideal for urban settings. JET 2 has two lamps with two separate optics and two independent control gears. It is suitable for the contemporaneous vertical and horizontal lighting.

a u .

m o c

. e d

a r nt

u s . w

350

JET

The upper grill functions as an anti-glare shield. Underneath is a disk made of polycarbonate stabilized by UV rays. The disk prevents objects entering the connection box. On request the adjustable reflector, with its 14° beam, can be supplied with a narrow 8° beam.

Between the upper grill and the cylindrical body (which contains the reflector), there are three holes to allow the down flow of any water. This prohibits any dirt deposits on the diffuser.

a u .

m o c

. e d

a r nt

u s . w

Inside the extruded aluminium tube (which acts as a support) is a second metal halide lamp with a separate control gear. With this configuration and the use of dichroic lens accessories, you can obtain accent lights, including coloured light at ground level.

351

JET

Die-cast EN AB-44100 aluminium housing (copper free) and extruded EN AW-6060 aluminium profile with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 8 mm thick. Stainless steel screws. Double cable entries with PG16 cable glands. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS I



a u .

20 Joule impact.

m o c

. e d

COLOURS: Aluminium grey (code 14) Anthracite grey

(code 24)

a r nt

S.3901

WIDE BEAM LENS It enlarges the standard beam from 14° to ~30° Must be installed under the front glass.

u s . w

COLOURED FILTERS S.3906 S.3907 S.3908 S.3909

Red Blue Yellow Green

NARROW 4° BEAM LENS

WIDE 40° BEAM LENS

S.4056 S.4057 S.4058 S.4059 S.4039

S.4076 S.4077 S.4078 S.4079 S.4040

Red Blue Yellow Green Clear lens

S.3371 ACCESSORY FLANGE Ø 195 mm flange and screws to be fixed in concrete.

352

Red Blue Yellow Green Clear lens

JET

VERTICAL EMISSION

JET 1 C0 7°+9° C90 14°

S.3326 For lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (8º beam reflector on request)

a u .

m o c

a r nt

JET 2 C0 7°+9° C90 14°

. e d

S.3346

VERTICAL EMISSION

u s . w 4°

For lamp HIT-CRI 70W G12 6600 lm Lamp position adjustable ± 15° (8º beam reflector on request)

HORIZONTAL EMISSION

HORIZONTAL EMISSION For lamp HIT-CRI 35W G12 3300 lm Lamp position fixed

353

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

355

a u .

m o c

. e d

a r nt

uSLOT POLE s . w

356

a u .

m o c

. e d

a r nt

u s . w

357

SLOT POLE

SLOT POLE’s asymmetric optic is completely downward. That allows optimum light distribution, to light urban areas in the correct way, in accordance with light pollution regulations.

Simulation with HIT-DE 70W Rx7s lamps. At ground level there is 25 lux as a minimum value and approx 80 lux as an average value. The street is 11 m wide and the spacing between the poles is 10 m.

HIT-DE 70W Rx7s

SIMULATION - S.3956 SLOT POLE SINGLE

HIT-DE 70W Rx7s

a u .

SIMULATION - S.3966 SLOT POLE DOUBLE

m o c

. e d

a r nt

u s . w

358

SLOT POLE

速

SLOT POLE luminaires have an inner diameter of 76 mm. The provided rapid connector allows an easy connection with the power supply line.

a u .

m o c

. e d

a r nt

u s . w

Product installed on a standard 76 mm diameter pole available on the market.

Product installed on a SIMES cylindrical pole 102 mm diameter with a 76 mm diameter spigot that offers perfect symmetry between the pole and the luminaire.

359

SLOT POLE

Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 8 mm thick. Post top luminaire with Ø 76 mm spigot attachment. Stainless steel screws. Electrical wiring with fast connectors. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS II



5 Joule impact.

a u .

m o c

. e d

Aluminium grey (code 14)

a r nt

550

FOCUS POINT = 5150

5800

500 Ø 102

Ø 102

360

5150

FOCUS POINT = 4150

4150

500

4800

Ø 76 Ø 102

150

Ø 102 150

u s . w

Ø 76

550

COLOURS:

S.2811

S.2816

Ø 102 mm CYLINDRICAL POLE TO BE BURIED with Ø 76 mm SPIGOT

Painted steel pole. Pole total height = 4.80 m. To be buried for 0.5 m. Provided with inspection door and terminal board.

Painted steel pole. Pole total height = 5.80 m. To be buried for 0.5 m. Provided with inspection door and terminal board.

SLOT POLE INSTALLED ON S.2811 POLE: Finished product total height = 4.70 m

SLOT POLE INSTALLED ON S.2816 POLE: Finished product total height = 5.70 m

SLOT POLE

S.3956

H = 5.7 m lux

0° =4

For lamp HIT-DE 70W Rx7s 6500 lm Lamp position fixed Luminous flux wasted upward 0%.

493 cd/klm

S.3958

H = 5.7 m lux

0°

For lamp HIT-DE 150W Rx7s 13250 lm Lamp position fixed Luminous flux wasted upward 0%.

528 cd/klm

a u .

m o c

. e d

a r nt

S.3966

For 2 lamps HIT-DE 70W Rx7s 6500 lm Lamps position fixed Luminous flux wasted upward 0%.

0°

u s . w

H = 5.7 m lux

493 cd/klm

S.3968 =4 0°

METAL HALIDE

For 2 lamps HIT-DE 150W Rx7s 13250 lm Lamps position fixed Luminous flux wasted upward 0%.

H = 5.7 m lux

528 cd/klm

SODIUM

Luminaire SLOT POLE for metal halide lamp HIT-DE can also use high pressure sodium lamp HST-DE, working with the same gear.

361

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

363

FOCUS POLE

a u .

m o c

. e d

a r nt

u s . w

364

a u .

m o c

. e d

a r nt

u s . w

365

FOCUS POLE

速

FOCUS POLE is suggested for illumination of urban sites and roads. Additional features are: _ no light pollution; _ excellent spacings between luminaires; _ energy saving; _ easy maintenance. With the same equipment you can use a metal halide HIT-CE/S 70W E27 lamp, to obtain white light, or a high pressure sodium HST-MF 70W E27 lamp, to obtain yellow light.

HIT-CE/S 70W E27

a u .

m o c

. e d

a r nt

u s . w

HST-MF 70W E27

366

FOCUS POLE

ÂŽ

FOCUS POLE luminaires have an inner diameter of 76 mm. They are provided with a rapid connector that allows easy connection with the power supply line.

a u .

m o c

. e d

a r nt

u s . w

Flat diffuser. Diffuser with anti-loss system. Screws with anti-loss system.

Due to a simple 5 STEP adjustment system, the lampâ&#x20AC;&#x2122;s position can be modified according to the project requirements. This allows you to achieve different photometric distributions and conforms to standards without having to change the height of the light centre points.

The reflector is made of a polymeric material. The surfaces have different finishes to control light emission according to the direction of the light with respect to the road surface:

1) longitudinal light; 2) transversal light; 3) light behind the pole. This way, the light is distribuited accurately to optimise the distance between light centre points.

367

MEGAFOCUS POLE

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Polymeric reflectors with aluminium settled on surface through “Sputter Technique” process. Clear toughened glass 8 mm thick. Post top luminaire with Ø 76 mm spigot attachment. Stainless steel screws. Electrical wiring with fast connector. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP66 CLASS II



a u .

20 Joule impact.

m o c

. e d

a r nt

150

Ø 102

800 Ø 102

368

6550

7500

FOCUS POINT = 4885

5050 600

5800

Ø 76

150

Ø 102

615

u s . w

Ø 76

FOCUS POINT = 6385

Anthracite grey (code 24)

615

COLOUR:

Ø 102

S.2816

S.2818

Ø 102 mm CYLINDRICAL POLE TO BE BURIED with Ø 76 mm SPIGOT

Painted steel pole. Pole total height = 5.80 m. To be buried for 0.6 m. Provided with inspection door and terminal board.

Painted steel pole. Pole total height = 7.50 m. To be buried for 0.8 m. Provided with inspection door and terminal board.

MEGAFOCUS POLE INSTALLED ON S.2816 POLE: Finished product total height = 5.50 m

MEGAFOCUS POLE INSTALLED ON S.2818 POLE: Finished product total height = 7.00 m

MEGAFOCUS POLE

Photometrics using HIT-CE/S 70W E27 lamp

S.3971

lux

H = 5.5 m

lux

H = 5.5 m

lux

H = 5.5 m

lux

2° =5

For metal halide lamp HIT-CE/S 70W E27 6300 lm

H = 5.5 m

745 cd/klm

and for

Lamp position 1

6° =5

high pressure sodium lamp HST-MF 70W E27 6300 lm Luminous flux wasted upward 0%.

849 cd/klm

Lamp position 2 330

615

580

165

450

8° =5

837 cd/klm

Lamp position 3

Øi 76

Ø 102

Ø 385

a u .

0° =6

725

793 cd/klm

Lamp position 4

0°

r t n

u s . w

lux

H = 5.5 m

lux

H = 5.5 m

lux

H = 5.5 m

lux

H = 5.5 m

lux

H = 5.5 m

lux

762 cd/klm

Lamp position 5

Photometrics using HST-MF 70W E27 lamp

4°

H = 5.5 m

544 cd/klm

Lamp position 1

2°

Metal halide lamps and high pressure sodium lamps work with the same gear, so you can use one or the other in the same fitting. The lamps can be set in 5 different positions to get 5 different photometric results. Photometrics with metal halide lamps are slightly different from those obtained with high pressure sodium lamps. We recommend you visit our website www.simes.it for updated and extensive documentation.

c . e =6

On request MEGAFOCUS POLE can be supplied as a TWIN HEAD version.

590 cd/klm

Lamp position 2

2° =5

620 cd/klm

2°

On request MEGAFOCUS POLE can be supplied in FLAT HEAD version.

Lamp position 3

626 cd/klm

Lamp position 4

2°

698 cd/klm

Lamp position 5

369

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

371

MINISLOT DISK

a u .

m o c

. e d

a r nt

u s . w

372

a u .

m o c

. e d

a r nt

u s . w

373

MINISLOT DISK

MINISLOT DISK is a post top luminaire with indirect light output that emitts light at 360°, in a very diffuse way. The distance between the glass of the fitting and the reflector has been calculated so that there is no light spill upwards, as the reflective diffuser intercepts all emitted upward light in accordance with light pollution regulations.

The indirect light element creates a very pleasant light halo effect without any glare.

HIT-CRI 70W G12

RENDERING - MINISLOT DISK

a u .

m o c

. e d

a r nt

MINISLOT DISK fits with many types of buildings from modern to more classical architecture due to its simple clean design. The end result is the provision of soft illumination level offering maximum spacings of up to 10 m ÷ 12 m.

u s . w

HIT-CRI 70W G12

374

RENDERING - MINISLOT DISK

MINISLOT DISK

MINISLOT DISK is a CLASS II decorative illumination system for indirect lighting in urban areas. The luminaires features soft light distribution onto the ground without any glare. The optical system comprises both a primary reflector inside the cylinder, and a secondary polymeric reflector, painted white, which reflects light toward the ground. Its “teardrop” curvature allows greater light-diffusion control for increased illumination and improved spacings.

a u .

m o c

. e d

a r nt

u s . w

The secondary diffuser’s holder has four steel arms and a plastic disk. The CLASS II power supply is separated from the lamp compartment.

375

MINISLOT DISK

LIGHT SOURCE: Die-cast EN AB-44100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance. 99,98% pure aluminium reflector. Clear toughened glass 8 mm thick. Stainless steel screws. Electrical wiring with fast connector. Silicone gaskets. Powdered paint with high corrosion resistance. POLE CONNECTION: Pole head in painted steel with Ø 120 mm connection. DIFFUSER: Diffuser with involute omnidirectional distribution for indirect light in fibre glass. Lamp not included. IP65 CLASS II

a u .



m o c

5 Joule impact

. e d

COLOURS: Aluminium grey (code 14)

a r nt

880

800 4200

4200 4800

4200

Ø 120

4200

880

FOCUS POINT = 5000

u s . w

600

470

250

170

1200

45x186

250

S.2840 Planted root h = 470 mm and bolts in galvanized steel with M16 threads. Suggested reinforced concrete footstall dimension **: A = 0.7 m B=1 m ** Footstall dimension can be calculated according to your country norms and ground properties.

376

Ø 120

S.2846

S.2826

Ø 120 mm CYLINDRICAL POLE WITH BASE

Ø 120 mm CYLINDRICAL POLE TO BE BURIED

Pole and base in galvanized steel, with polyester powdered paint with high resistance against UV rays and corrosion. Galvanization, sections and thickness in compliance with UNI EN 40 norms. Pole total height = 4.20 m. Provided with inspection door and terminal board.

Painted steel pole. Pole total height = 4.80 m. To be buried for 0.6 m. Provided with inspection door and terminal board.

MINISLOT DISK INSTALLED ON S.2846 POLE: Finished product total height = 5.00 m

MINISLOT DISK INSTALLED ON S.2826 POLE: Finished product total height = 5.00 m

FOCUS POINT = 5000

(code 24)

800

Anthracite grey

MINISLOT DISK

速

S.3983 For lamp HIT-CRI 70W G12 6600 lm

S.3984 For lamp HIT-CRI 150W G12 14000 lm

a u .

m o c

. e d

a r nt

u s . w

LIGHTING POLLUTION Available on request a special version with luminous flux wasted upward = 0%

377

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

379

MINISLOT AVANT-GARDE

a u .

m o c

. e d

a r nt

u s . w

380

a u .

m o c

. e d

a r nt

u s . w

381

MINISLOT AVANT-GARDE

速

The SIMES R&D department, in collaboration with Bartenbach Licht Labor, has designed a decorative system for indirect urban lighting. Using the technology of secondary mirror reflectors, with 88 muti-faceted mirrors, we have created an optical performance never achieved before. The MINISLOT AVANT-GARDE advantages: _ maximum visual comfort; _ perfectly uniform lighting on the ground; _ excellent interspacing between light centre points; _ the luminous flux emitted by the primary reflector is kept contained inside the upper disk. The maximum visual comfor is very important especially when put into the urban context, where light is an important tool for enhancing peoples lives while complimenting the surrounding environment. The people who use the space need to be able to move around at night without suffering from glare or impaired vision. This is why it is crucial to meet the requested lighting levels and recommandetions for urban areas. All the above needs to be addressed while still avoiding any light pollution.

HIT-CRI 70W G12

a u .

m o c

. e d

a r nt

u s . w

HIT-CRI 70W G12

382

RENDERING - MINISLOT AVANT-GARDE with ASYMMETRIC reflector

RENDERING - MINISLOT AVANT-GARDE with SYMMETRIC reflector

MINISLOT AVANT-GARDE

This detail shows how to fasten the secondary reflector’s holder onto the pole and how to insert the luminaire onto the pole.

The CLASS II control gear is outside the lamp compartment, and is fitted inside the pole. The mirrors are affixed to an ultra-light plastic disk. The combined weight of mirror and polycarbonate disk is only 15 kg. The holder is made of steel for mechanical strength and resistance to heavy atmospheric stress.

a u .

m o c

. e d

a r nt

u s . w

Two mirrors are provided, depending on whether the model is asymmetric or symmetric.

To clean, simply use a wet cloth. The use of detergents or cleaning agents is not advised.

ASYMMETRIC MODEL

For optimal light output and perfect control of photometric distribution on the ground, the edges must be produced with microscopic precision. The process of laying the aluminium layer down on the reflector’s polymeric structure is carried out in a vacuum to provide exceptional reflective properties. A thin, transparent film provides protection from UV rays and environmental agents.

SYMMETRIC MODEL

383

MINISLOT AVANT-GARDE

Light fitting in die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Main reflector in 99.98% pure aluminium. Secondary reflector with 88 multi-faceted mirrors, in polymers covered with 99.98% pure aluminium. Clear toughened glass 8 mm thick. Stainless steel screws. Electrical wiring with fast connector. Silicone gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS II



a u .

m o c

5 Joule impact

. e d

COLOUR: Aluminium grey (code 14)

a r nt

1200

6000

FOCUS POINT = 7000

FOCUS POINT = 7130

u s . w Ø 120

470

250

170

1200

45x186

250

S.2848 Ø 120 mm CYLINDRICAL POLE WITH BASE Pole and base in galvanized steel, with polyester powdered paint with high resistance against UV rays and corrosion. Galvanization, sections and thickness in compliance with UNI EN 40 norms. Pole total height = 6.00 m. Provided with inspection door and terminal board. MINISLOT AVANT-GARDE INSTALLED ON S.2848 POLE: Finished product total height = 7.00 m

384

MINISLOT AVANT-GARDE

速

ASYMMETRIC VERSION

S.3953

H=7m

For lamp HIT-CRI 70W G12 6600 lm lux

S.3954

H=7m

For lamp HIT-CRI 150W G12 14000 lm lux

a u .

m o c

. e d

a r nt

SYMMETRIC VERSION

S.3963

lux

H=7m

For lamp HIT-CRI 70W G12 6600 lm

u s . w

S.3964

lux

For lamp HIT-CRI 150W G12 14000 lm

385

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

387

SLOT VELA

a u .

m o c

. e d

a r nt

u s . w

388

a u .

m o c

. e d

a r nt

u s . w

389

SLOT VELA

速

SLOT VELA is a versatile post top luminaire with direct and indirect light output. The luminaire is a bi-directional SLOT fitting with twin lamp operational and two independent gears for separate switching. SLOT VELA can be used both with direct and indirect light emission (like the first example beside) or only with direct downward light emission (like in the second example) according to the light pollution regulations. The use of a shaped optic for the projection on the sail, allows a wide floodlight on the ground with a very diffuse effect. The downward optic has been studied to achieve excellent asymmetric light distribution independent from the indirect light emission. HIT-DE 150W and 70W Rx7s

INDIRECT LIGHT HIT-DE 150W and DIRECT LIGHT HIT-DE 70W

a u .

m o c

. e d

a r nt

u s . w

HIT-DE 70W Rx7s

390

DIRECT LIGHT HIT-DE 70W

SLOT VELA

速

SLOT VELA stands up to stress, even strong winds, thanks to its special positioning on the pole, as well as its overall mechanical strength. For optimal aesthetics you need to obtain perfect synergy between the support tube and the pole. For this reason SIMES S.p.A. offers steel poles already fitted with the proper connections.

a u .

m o c

. e d

a r nt

u s . w

All screws are in stainless steel.

391

SLOT VELA

LIGHT SOURCE: Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Bidirectional reflector with street optic for direct downward illumination. Asymmetric reflector for indirect upward illumination. Clear toughened glass 8 mm thick. Stainless steel screws. Two independent control gears. Electrical wiring with fast connector. Silicone gaskets. POLE CONNECTION: Pole head in painted steel with Ø120 mm connection. DIFFUSER: Diffuser with involute distribution for indirect light in white fibre glass. Lamp not included. IP65

a u .

CLASS II



m o c

5 Joule impact

a r nt

u s . w

Ø 120

5000

Ø 120

SLOT VELA must be used only with pole Ø 120 mm. The Ø 108 mm ÷ Ø 120 mm POLE CONNECTOR is available on request to get a perfect symmetry between pole and head pole (Ø 120 mm both). Ø 120 mm SIMES poles (Articles S.2836 and S.2837) are supplied with Ø 108 mm welded spigot, so they do not need the pole connector accessory.

392

2000 1000

1000

800

2000

8250

FOCUS POINT = 6600

4800

5850

ACCESSORY POLE CONNECTOR FOR Ø 120 mm POLE (Required when you don’t use SIMES poles).

4800

Art. S.2835

FOCUS POINT = 8800

250 Ø 108

250

Ø 120

1800

Ø 108

5000

Aluminium grey (code 14)

1800

. e d

COLOUR:

Ø 194

S.2836

S.2837

Ø 120 mm CYLINDRICAL POLE TO BE BURIED with Ø 108 mm SPIGOT

Ø 194 mm - Ø 120 mm CYLINDRICAL SHAPED POLE TO BE BURIED with Ø 108 mm SPIGOT

Painted steel pole. Pole total height = 5.85 m. To be buried for 0.8 m. Provided with inspection door and terminal board.

Painted steel pole. Pole total height = 8.25 m. To be buried for 1.0 m. Provided with inspection door and terminal board.

SLOT VELA INSTALLED ON S.2836 POLE: Finished product total height = 6.60 m

SLOT VELA INSTALLED ON S.2837 POLE: Finished product total height = 8.80 m

SLOT VELA

S.3978

H = 8.8 m lux

INDIRECT EMISSION (UPWARD) For lamp HIT-DE 150W Rx7s 13250 lm Lamp position fixed DIRECT EMISSION (DOWNWARD) For lamp HIT-DE 70W Rx7s 6500 lm Lamp position fixed

325

493 cd/klm

a u .

m o c

. e d

a r nt

S.3974

u s . w

INDIRECT EMISSION (UPWARD) For 2 lamps HIT-DE 150W Rx7s 13250 lm Lamps position fixed

DIRECT EMISSION (DOWNWARD) For 2 lamps HIT-DE 70W Rx7s 6500 lm Lamps position fixed 493 cd/klm H = 8.8 m

lux

2960

325

1490

SODIUM

1490

Ø 250

SLOT VELA fittings for metal halide HIT-DE lamps can also use sodium HST-DE lamps, working with the same gear.

393

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

395

a u .

m o c

. e d

a r nt

u s . w

SCHERMA

396

a u .

m o c

. e d

a r nt

u s . w

397

SCHERMA

ÂŽ

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Sand blasted glass diffuser (Vandalproof opal polycarbonate diffuser available on request). Aluminium reflector. Stainless steel screws. Single cable entry with PG11 cable gland, with the possible use of the second cable entry. Dutral gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP65 CLASS I

î ˘

a u .

m o c

. e d

COLOUR: Black

(code 09)

a r nt

S.6261

ACCESSORY FLANGE Flange to be fixed in concrete with stainless steel screws. Dimensions: 180 x 105 mm.

u s . w

398

SCHERMA

速

SCHERMA WALL

S.6201 For lamp A60 75W E27 960 lm

S.6215 For lamp TC-L 18W 2G11 1200 lm

SCHERMA POLE SINGLE

S.6301/S For lamp A60 75W E27 960 lm H = 970 mm

a u .

m o c

S.6315/S

For lamp TC-L 18W 2G11 1200 lm H = 970 mm

. e d

a r nt

S.6301/M

u s . w

For lamp A60 75W E27 960 lm H = 1370 mm

S.6315/M For lamp TC-L 18W 2G11 1200 lm H = 1370 mm

SCHERMA POLE DOUBLE

S.6401/M For 2 lamps A60 75W E27 960 lm H = 1370 mm

S.6415/M For 2 lamps TC-L 18W 2G11 1200 lm H = 1370 mm

399

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

401

a u .

m o c

. e d

a r nt

u s . w

VEDO

402

a u .

m o c

. e d

a r nt

u s . w

403

VEDO

ÂŽ

Die cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Sand blasted glass diffuser (Vandalproof opal polycarbonate diffuser available on request). Stainless steel screws. Double cable entries. Dutral gaskets. Powdered paint with high corrosion resistance. Lamp not included. IP55 CLASS I

î ˘

a u .

m o c

COLOURS: White

(code 01)

Black

(code 09)

. e d

Aluminium grey (code 14)

a r nt

EMERGENCY VERSIONS

u s . w

404

On request MEGAVEDO ROUND and OVAL are available as 1hr maintained emergency luminaires. The luminaires are supplied with emergency inverter and battery to supply 1hr emergency lighting in the case of a mains failure. In emergency mode the luminaire has a ballast lumen factor which is 28% of the rated light output of the lamp in normal operation. The recharge time for the batteries is 24 hours.

VEDO WITH RING

VEDO OVAL WITH RING

S.6701 For lamp A60 75W E27 960 lm

S.6709 For lamp TC-D 18W G24d-2 1200 lm

S.6765 For lamp A65 150W E27 2200 lm

S.6769 For lamp TC-F 36W 2G10 2800 lm

160

m o c

230

175

. e d

390

300

125

a u .

a r nt

VEDO ROUND WITH RING

u s . w

S.6801 For lamp A60 75W E27 960 lm

S.6809 For lamp TC-D 18W G24d-2 1200 lm

S.6865 For lamp A65 150W E27 2200 lm

S.6869 For lamp TC-F 36W 2G10 2800 lm

120

Ø 260

150

Ø 340

405

VEDO WITH UP-DOWN VISOR

速

VEDO OVAL WITH UP-DOWN VISOR

S.6741 For lamp A60 75W E27 960 lm

S.6749 For lamp TC-D 18W G24d-2 1200 lm

S.6775 For lamp A65 150W E27 2200 lm

S.6779 For lamp TC-F 36W 2G10 2800 lm

a u .

m o c

. e d

a r nt

VEDO ROUND WITH UP-DOWN VISOR

u s . w

S.6841 For lamp A60 75W E27 960 lm

S.6849 For lamp TC-D 18W G24d-2 1200 lm

S.6875 For lamp A65 150W E27 2200 lm

S.6879 For lamp TC-F 36W 2G10 2800 lm

406

VEDO WITH DOWN VISOR

速

VEDO OVAL WITH DOWN VISOR

S.6751 For lamp A60 75W E27 960 lm

S.6759 For lamp TC-D 18W G24d-2 1200 lm

S.6785 For lamp A65 150W E27 2200 lm

S.6789 For lamp TC-F 36W 2G10 2800 lm

a u .

m o c

. e d

a r nt

VEDO ROUND WITH DOWN VISOR

u s . w

S.6851 For lamp A60 75W E27 960 lm

S.6859 For lamp TC-D 18W G24d-2 1200 lm

S.6885 For lamp A65 150W E27 2200 lm

S.6889 For lamp TC-F 36W 2G10 2800 lm

130

168

407

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

409

a u .

m o c

. e d

a r nt

u s . w

410

PLAFONIERE

a u .

m o c

. e d

a r nt

u s . w

411

PLAFONIERE

ÂŽ

Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Aluminium reflector. Sand blasted glass diffuser (Vandalproof opal polycarbonate diffuser available on request for big sizes). Double cable entries. Powdered paint with high corrosion resistance. Lamp not included. IP54 CLASS I

î ˘

a u .

m o c

. e d

COLOURS: White

(code 01)

Black

(code 09)

a r nt

u s . w

412

PLAFONIERE BUL

速

PLAFONIERE BUL WITH RING

S.6501 For lamp A60 60W E27 730 lm

S.6509 For lamp TC-D 10W G24d-1 600 lm

S.6531 For lamp A60 100W E27 1380 lm

S.6539 For lamp TC-D 18W G24d-2 1200 lm

a u .

m o c

. e d

a r nt

PLAFONIERE BUL WITH VISOR

u s . w

S.6521 For lamp A60 60W E27 730 lm

S.6529 For lamp TC-D 10W G24d-1 600 lm

S.6551 For lamp A60 100W E27 1380 lm

S.6559 For lamp TC-D 18W G24d-2 1200 lm

413

PLAFONIERE ROUND

速

PLAFONIERE ROUND WITH RING

S.18 For lamp A60 75W E27 960 lm

S.185 For lamp TC-D 10W G24d-1 600 lm

S.20 For lamp A60 100W E27 1380 lm

S.389 For lamp TC-D 18W G24d-2 1200 lm

m o c

a u .

. e d

a r nt

PLAFONIERE ROUND WITH CAGE

u s . w

S.18/G For lamp A60 75W E27 960 lm

S.185/G For lamp TC-D 10W G24d-1 600 lm

S.20/G For lamp A60 100W E27 1380 lm

S.399/G For lamp TC-D 18W G24d-2 1200 lm

414

PLAFONIERE OVAL

速

PLAFONIERE OVAL WITH RING

S.14 For lamp A60 60W E27 730 lm

S.145 For lamp TC-D 13W G24d-1 900 lm

S.16 For lamp A60 100W E27 1380 lm

S.349 For lamp TC-D 18W G24d-2 1200 lm

a u .

m o c

. e d

a r nt

PLAFONIERE OVAL WITH CAGE

u s . w

S.14/G For lamp A60 60W E27 730 lm

S.145/G For lamp TC-D 13W G24d-1 900 lm

S.16/G For lamp A60 100W E27 1380 lm

S.359/G For lamp TC-D 18W G24d-2 1200 lm

415

PLAFONIERE OVAL

速

PLAFONIERE OVAL WITH HORIZONTAL VISOR

S.25 For lamp A60 60W E27 730 lm

S.255 For lamp TC-D 13W G24d-1 900 lm

S.27 For lamp A60 100W E27 1380 lm

S.659 For lamp TC-D 18W G24d-2 1200 lm

m o c

a u .

. e d

a r nt

u s . w

416

a u .

m o c

. e d

a r nt

u s . w

417

a u .

m o c

. e d

a r nt

u s . w

SUB

418

a u .

m o c

. e d

a r nt

u s . w

419

SUB

Ideal for fountains, artificial lakes or any body of water. The SUB luminaire is made of solid bronze and can even be installed in seawater. The maximum installation depth of the luminaire is 3 m. With the passage of time the luminaire body oxidises, adopting the green colouring characteristics of oxidised bronze.

a u .

m o c

. e d

a r nt

u s . w

420

SUB

With SUB you can create coloured light effects with the addition of coloured filters. Also available is a protective grill for preventing any damage to the lamp.

a u .

m o c

. e d

a r nt

u s . w

Close-up of the brass cable gland.

Coloured filters can be used only with the massive bronze protection grill. The picture shows the positioning of coloured filters, that must be fixed on the grill.

421

SUB

Sand cast bronze housing type B10. Stainless steel screws. Single cable entry with 1/2” brass cable gland. Luminaire hard wired with 6 m. neoprene cable H07RN-F. Silicone gaskets. Lamp included. IP68 3m. CLASS III



a u .

m o c

. e d

a r nt

MINISUB

422

MINISUB Luminaire hard wired with 6 m. neoprene cable (2 x 6 mm²). Cable type H07RN-F.

SUB Luminaire hard wired with 6 m. neoprene cable (2 x 6 mm²). Cable type H07RN-F.

S.3644

S.3654

PROTECTION GRILL IN BRONZE Ø165 mm.

PROTECTION GRILL IN BRONZE Ø240 mm.

COLOURED FILTERS S.3646 Red S.3647 Blue S.3648 Yellow S.3649 Green to be used only with the PROTECTION GRILL

COLOURED FILTERS S.3656 Red S.3657 Blue S.3658 Yellow S.3659 Green to be used only with the PROTECTION GRILL

S.3643

S.3653

TRANSFORMER 50VA 240V ÷ 12V in IP65 box.

TRANSFORMER 300VA 240V ÷ 12V in IP65 box.

u s . w

SUB

MINISUB

S.3641

37°

With lamp PAR36 50W 12V screw terminal 900 cd (Without transformer)

a u .

m o c

. e d

a r nt

SUB

S.3651

With lamp PAR56 300W 12V screw terminal 16000 cd (Without transformer)

u s . w 37°

423

a u .

m o c

. e d

a r nt

u s . w

a u .

m o c

. e d

a r nt

u s . w

425