Roots Blower Booster Vacuum Pump Oil
Roots Blower Booster Pumps
Roots Blower Booster Pump: These pumps work on the principle of positive displacement of gas. The Roots pump consists of two impellers called roots in the shape of figure 8. These impellers are mounted on parallel shafts in a single cylinder having inlet and outlet openings on the sides. The impellers, through synchronized rotative timing, are maintained in a relative position to each other and rotated in opposite directions without any internal contact and at a very high speed measuring a couple thousand or more rpm. The operating clearances are very small, measuring just a few microns– only a few thousandths of an inch - in order to keep back leakage to a minimum.
The following diagram shows how the rotation of impellers traps and pushes the gas/air out. The positive displacement works in a continuous flow to create vacuum.
Choose the Right Type of Lubricant
Often, out of ignorance, cost-cutting or any other reason, people use ordinary machine oil, automotive lubricants, gear oils or even normal rotary pump oil in these booster pumps. Since these oils do not have properties required for safe running of Booster Pumps, this leads to serious damage to the pump. Repairing a booster pump is nearly impossible without a complete overhaul which costs a lot while a new pump too costs lakhs of rupees. Choosing the right lubricant for the booster pump is the best type of insurance one can bank upon. A suitable, high quality booster pump oil is the pump’s primary protection against wear, pitting, spalling, scoring and scuffing of moving metal parts. The following pictures demonstrate the type of damage that can occur due to – 1. Wrong choice of lubricant 2. Not topping up at the right time, so the metal parts are not well-oiled.
1
2
3
4
5
6
Careful selection of lubricant goes a long way in saving the machinery thereby preventing loss of time and money. When it comes to the choice of lubricant – One size DOES NOT fit all Different vacuum processes require different types and grades of vacuum oil. Supervac Roots Blower Vacuum Lubricants:
After careful actual testing on Roots blower pumps, Supervac has formulated Roots blower vacuum oil in two grades1. Hydro-carbon based booster pump oil- SV-90H
2. Silicone based booster pump oil- SV-90S
Both are suitable for all makes and sizes of Roots Booster pumps all over the world.
Specifications:
SV-90H (Hydrocarbon)
SV-90S (Silicone)
Property
Value
Property
Value
Vapor Pressure at 250C
Below 1x10-4 Torr
Vapor Pressure at 250C
Below 1x10-4 Torr
Flash Point
2700 C
Flash Point
3000 C
Viscosity at 400 C
90 cst
Viscosity at 400 C
90 cst
Pour Point
Below (-) 10 C
Pour Point
Below (-) 150 C
Appearance
Pale Yellow
Appearance
Water White
Packaging
(20 Ltrs.) (210 Ltrs.)
Packaging
(20 Ltrs.) (210 Ltrs.)
Equivalent
0
Edwards Stokes- V lube Grade H oil Lubricant
Roots Synthetic Lubricant ISO VG 320 Equivalent
LVO 210 GS 555 HE 600
Supervac Roots Blower vacuum pump oils have the following
properties – 1. Excellent lubrication 2. Heat dissipation 3. Protection of the pump machinery It carries damaging wear debris away from contact zones. Offer extreme temperature and pressure protection in order to
prevent wear, pitting, spalling, scoring, scuffing and other types of damage that result in equipment failure and downtime. Protection against1. Oxidation 2. Thermal degradation 3. Rust 4. Copper corrosion and 5. Foaming.
Pump parts come in contact with different types of contaminants like water, corrosive chemicals and surface wear debris which can cause serious and irreparable equipment failure.
What is so special about Supervac Roots Blower Vacuum Pump Oils? Supervac Roots Blower lubricants have been formulated specially for Roots Booster vacuum pumps (also called positive displacement pumps) and are loaded with the following features – Viscosity index improvers – Supervac brand Roots Blower pump oils
have the viscosity - 90 cst at 40 0 C which is ideal for functioning of the pump. Special viscosity index improver additives make them work superbly in hot as well as cold climates. Anti-foam additives –Impellers inside the pump are moved by gears
at a very high speed (2000 or more rpm) and oil on them is churning at that point. Ordinary gear oil is likely to form foam. Formation of foam in Roots Blower pump is absolutely unwanted in a vacuum system. Just a trace amount escaping into the chamber can wreak havoc to the entire process. Supervac Roots Blower oils have been specially formulated keeping this important property in mind.
Wear protection additives – Along with lubrication, Supervac Roots
Blower oils protect the machinery against wear like pitting, spalling and scuffing thereby enhancing the machinery life. Corrosion inhibitors – Special additives in these oils resist corrosion caused by strong toxic process gasses. Extremely high film strength Low co-efficient of friction Warning: 1) Supervac DOES NOT recommend the use of automotive lubricants or gear oils for Roots Blower pumps as they DO NOT have the above mentioned properties which are absolutely necessary for vacuum booster pumps. 2) Topping up of Booster Pump oil is absolutely essential to prevent pump damage. If level of oil falls below required level, immediately make up the level by adding more oil.
As is evident from the above diagram, a whopping 89% of the problems related with booster pumps are lubricant related. Merely choosing a good pump is not enough. If our money’s worth is to be taken out of that pump then it has to be run with the right oil and regular and timely topping up. Often factory manufactured pumps come filled with booster pump oils. This oil must be changed within the break-in period initially and after set periods later on if we want the pump running smoothly and without any failures.