Perpetual Plates
Laserable Header Plates
LASER ENGRAVED BRASS PLATES
Perpetual Plates
Laser Engraved Header & Base Plates
CUSTOM PLAQUE PLATE MATERIAL
This material is a light weight, flexible plastic used for laser engraved plates. It is .020 thick with an adhesive back. It is ideally used for trophies, awards, and most other items requiring an engraved plate. It is designed for interior use only. Note: Colors are approximate.
Maximum plate size is 12” x 24” (288 sq/in.).
Minimum letter height: 1/8”
Setup Fee: $20(V) Repeat Setup: $10(V) Personalization: $3(V)
CUSTOM PLAQUE PLATE MATERIAL
Maximum plate size is 12” x 24” (288 sq/in.). Minimum letter height: 1/8”
Setup Fee: $20(V) Personalization: $3(V) Repeat Setup: $10(V)
PERPETUAL PLAQUES - CHERRY
CPP12
12” x 12-1/2” - 12 Plates
Weight: 3 lbs.
CPP36
15” x 18” - 36 Plates Weight: 7.4 lbs.
CPP18
12” x 15” - 18 Plates Weight: 3.8 lbs.
CPP45
16” x 20” - 45 Plates Weight: 8.4 lbs.
CPP24
12” x 18-1/2” - 24 Plates
Weight: 4.5 lbs.
CPP60
16” x 20” - 60 Plates Weight: 8.8 lbs.
All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
Perpetual Plates are 1” x 2-1/2” (Item # 466-36) solid black. For Replacement Perpetual Plates and Header Plates, see: Page 900 - Blank Plates Page 901 - Engraved Plates
Setup Fee: $50(V)
Repeat Setup Fee: $25(V)
PERPETUAL PLAQUES - GENUINE WALNUT
WPP12
9” x 12” - 12 Plates Weight: 2.3 lbs.
WPP24
12” x 15” - 24 Plates Weight: 4.0 lbs.
STEP EDGE - GENUINE WALNUT
WPP18
10-1/2” x 13” - 18 Plates Weight: 3.0 lbs.
WPP36
12” x 18” - 36 Plates Weight: 5.4 lbs.
WPP45
16” x 20” - 45 Plates Weight: 8.6 lbs.
Weight:
WPP72 - 12.5 lbs. WPP84 - 12.7 lbs.
WPP102 - 13.2 lbs
Size: 18” x 24” for these 3 plaques.
WPP60
16” x 20” - 60 Plates Weight: 8.8 lbs.
Step Edge Genuine Walnut Perpetual Plaques are completely assembled with screws. All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
Perpetual Plates are 1” x 2-1/2” (Item # 466-36) solid black. For Replacement Perpetual Plates and Header Plates, see: Page 900 - Blank Plates Page 901 - Engraved Plates
Setup Fee: $50(V)
Repeat Setup Fee: $25(V)
PERPETUAL PLAQUES - PIANO FINISH
BPP24
12” x 15” - 24 Plates Weight: 4.6 lbs.
Black Piano Finish
BPP12 9” x 12” - 12 Plates Weight: 3.0 lbs.
BPP18
10-1/2” x 13” - 18 Plates Weight: 3.5 lbs.
Black Piano Finish Perpetual Plaques are completely assembled with screws. All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
For Replacement Perpetual Plates and Header Plates, see: Pg. 900 - Blank Plates or Pg. 901 - Engraved Plates
Setup Fee: $50(V)
Repeat Setup Fee: $25(V)
CHERRY FINISH PERPETUAL PHOTO
Perpetual Plates are 1” x 2-1/2” solid black #466-36. For replacement Perpetual Plates and Header Plates: Page 900 - Blank Plates Page 901 - Engraved Plates
All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
-1/2” x 13” Plaque Holds 3-1/2” x 5” Photo
Setup Fee: $50(V)
Repeat Setup Fee: $25(V)
PERPETUAL PLAQUES - OAK - WALNUT
12” x 15” - 24 Plates
OPP18
10-1/2” x 13” - 18 Plates Weight: 3.0 lbs.
OAK FINISH
Perpetual Plate: 466-36
All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
For additional Perpetual Plates and Header Plates, see: Page 900 for Blank Plates. Page 901 for Engraved Plates
Setup: $50(V) Repeat Setup: $25(V)
WALNUT FINISH
For additional Perpetual Plates and Header Plates: See Page 900 for Blank Plates Page 901 for Engraved Plates
All perpetual plates are 1” x 2-1/2”.
Perpetual Plate: 466-36
Only available with laserable black plates.
All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
Setup: $50(V) Repeat Setup: $25(V)
PERPETUAL PLAQUES - ELLIPTICAL
All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
For additional Perpetual Plates and Header Plates, see Page 900 - Blank Plates & Page 901 - Engraved Plates
Black Brass Plates “Engrave Gold”. All completed perpetual plaques are assembled with screws.
10-1/2” x 13” - 18 Plates
3.0 lbs.
Elliptical Walnut
9” x 12” - 12 Plates
2.5 lbs.
x 15” - 24 Plates
4.1 lbs.
Setup Fee: $50(V) Repeat Setup Fee: $25(V)
MAGNETIC PERPETUAL PLAQUES
Engraved plates may be quickly changed or updated using a magnetic release feature that allows you to use your finger to push out the old plate and replace it with a new one.
APT200CBK - 9” x 12” Plaque
12 Plate - 2.45 lbs.
24 Plate - 4.2 lbs.
12 - 1” x 3” Black Plates (PT200BBK) 1 - 2-1/2” x 6-1/2” Black Header Plate (PT200EBK)
APT200DBK - 12” x 15” Plaque
24 - 1” x 3” Black Plates (PT200BBK)
1 - 2-1/2” x 10” Black Header Plate (PT200GBK)
APT225CBL - 9” x 12” Plaque
12 - 1” x 3” Blue Marble Plates (PT225BBL) 1 - 2-1/2” x 6-1/2” Blue Marble Header (PT225EBL) or
APT225DBL - 12” x 15” Plaque 24 - 1” x 3” Blue Marble Plates (PT225BBL)
1 - 2-1/2” x 10” Blue Marble Header (PT225GBL)
All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
Setup: $50(V)
Repeat Setup: $25(V)
Replacement Plates
First time setup: $20(V)
Repeat Setup: $10(V) Weight: .13 lbs.
MAGNETIC PHOTO PLAQUES
10-1/2” x 13” Plaque
Holds 4” x 6” Photo
(1) 2” x 4” Engraved Plate (12) 1” x 3” Plates
Engrave area under photo: 3/4” x 3-3/4”
APT205DBK prices include laser engraved plate under photo, engraved 2” x 4” Header Plate, & 1 (1” x 3”) Plate. All plaque prices include one laser engraved Header Plate and one laser engraved Perpetual Plate. Engraving of additional Perpetual Plates are $6.00(V). Repeat setup fee: $10(V).
Setup: $50(V) Personalization: N/C Repeat Setup: $25(V)
3.5
First time setup: $20(V) Repeat Setup: $10(V)
.05 lbs.
PIANO FINISH FLOATING ACRYLIC PLAQUES
RED PIANO FINSH
FPA1810 - 8” x 10”
FPA1912 - 9” x 12”
FPA11113 - 10-1/2” x 13”
Piano Finish Floating Plaques feature a 3/16” thick acrylic plate with beveled edges suspended 1/4” above the plaque using gold hardware on the red and silver on the black.
The plaque includes two round pins to be used for standing either horizontal or vertical.
The back has a black felt covering. Also, slots for hanging either horizontal or vertical are included. Laser engraves frost.
Acrylic plate is approximately 1” per side smaller than plaque.
8” x 10” Plaque - Engrave area is 4” x 6”. 9” x 12” Plaque - Engrave area is 5” x 8”. 10-1/2” x 13” Plaque - Engrave area is 6” x 9”. Edge profile of plaque:
BLACK PIANO FINSH
FPA2810 - 8” x 10”
FPA2912 - 9” x 12”
FPA21113 - 10-1/2” x 13”
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup: $25(V)
STAND-OFF ACRYLIC PLAQUES
Acrylic plate stands-off 1/2” above plaque. Color border is 1” wide. Easel back is pre-attached and includes eyelets for hanging either horizontal or vertical. Laser engraving is frost color. Includes laser engraving. Plaque edges are square.
FAC1810 - 8” x 10”
Acrylic blank size: 5-1/2” x 8”
FAC1912 - 9” x 12”
Acrylic blank size: 6-1/2” x 9-1/2”
Blue/Black
FAC2810- 8” x 10”
Acrylic blank size: 5-1/2” x 8”
FAC2912- 9” x 12”
Acrylic blank size: 6-1/2” x 9-1/2’ Red/Black
DISCONTINUED OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Majestic plates are discontinued. Not all sizes are still available. Please call to confirm inventory.
The Rising Star plates are discontinued. Not all sizes are still available. Please call to confirm inventory.
The Showtime plates are discontinued. Not all sizes are still available. Please call to confirm inventory.
DISCONTINUED OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Starburst plate is discontinued. Not all sizes are available. Please call for inventory
The Starburst plate is
Please
DISCONTINUED OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Patina plates are discontinued and a limited quantity is available. Electrifying Performance Award TO
The Marble Mist plates are discontinued and a limited quantity is available.
OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Green/Gold Plate LASER ENGRAVES GOLD
Red/Gold Plate LASER ENGRAVES GOLD
DISCONTINUED OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Item # OKPPP816()GBL Victory Sunray Plate
Blue/Gold - Engraves Gold
These are discontinued plaques. There is a limited availability left. Not all colors have all sizes left.
Item # OKPPP816()SPU Victory Sunray Plate Purple/Silver - Engraves Silver Item # OKPPP816()SBL
Sunray Plate
- Engraves Silver
Sunray Plate
- Engraves Silver
OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
PROFILE
LASER ENGRAVES GOLD
LASER ENGRAVES GOLD
INDICATE PLAQUE SIZE DESIRED.
Setup Fee: $50(V)
Personalization: $3(V)
LASER ENGRAVES GOLD
Repeat Setup Fee: $25(V) (R)
OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Victory Star Marble Plate is discontinued. All plate sizes aren’t available. Please call for inventory.
DISCONTINUED OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Art Plates have been discontinued. Please call to check inventory. The Teardrop Plates have been discontinued. Please call to check inventory.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V) (R)
INDICATE PLAQUE SIZE DESIRED.
OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
OAK PLAQUES
This Plaque is made of Particle Wood with an Oak Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Setup Fee: $50(V) Personalization:
DISCONTINUED CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Majestic plate is discontinued. Not all sizes are available. Please call to check inventory.
The Rising Star plate is discontinued. Not all sizes are available. Please call to check inventory.
The Showtime plate is discontinued. Not all sizes are available. Please call to check inventory.
DISCONTINUED CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Artist Series plate is discontinued. Not all sizes are available. Please call for inventory
The Starburst plate is discontinued. Not all sizes are available. Please call for inventory.
DISCONTINUED CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Patina plate is discontinued with a limited quantity available.
The Marble Mist plate is discontinued with a limited quantity available.
CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
DISCONTINUED CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
These are discontinued plaques. There is a limited availability left. Not all colors have all sizes left.
INDICATE PLAQUE SIZE DESIRED.
CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
INDICATE PLAQUE SIZE DESIRED.
CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Blue/Gold Plate LASER ENGRAVES GOLD
The Victory Star Marble Plate is discontinued. All plate sizes aren’t available. Please call for inventory. Green/Gold Plate
Sienna/Gold Plate LASER ENGRAVES GOLD
Black/Gold Plate LASER ENGRAVES GOLD
Plate
DISCONTINUED CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Art Plates have been discontinued. Please call to check inventory.
Setup Fee: $50(V)
Personalization: $3(V)
Repeat Setup Fee: $25(V)
The Teardrop Plates have been discontinued. Please call to check inventory.
INDICATE PLAQUE SIZE DESIRED.
CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
CLASSIC WALNUT PLAQUES
This Plaque is made of Particle Wood with a Walnut Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
INDICATE PLAQUE SIZE DESIRED.
DISCONTINUED CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Majestic plate is discontinued. Not all sizes are available. Please call to check inventory.
The Rising Star plate is discontinued. Not all sizes are available. Please call to check inventory.
The Showtime plate is discontinued. Not all sizes are available. Please call to check inventory.
DISCONTINUED CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Artist Series plate is discontinued. Not all sizes are available. Please call for inventory
The Starburst plate is discontinued. Not all sizes are available. Please call for inventory
DISCONTINUED CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Patina plates are discontinued with a limited quantity available.
The Marble Mist plates are discontinued with a limited quantity available.
CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Black/Gold Plate LASER ENGRAVES GOLD PROFILE
Blue/Gold Plate LASER ENGRAVES GOLD
Green/Gold Plate LASER ENGRAVES GOLD
Red/Gold Plate LASER ENGRAVES GOLD
DISCONTINUED CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Item # CFPPP816()GBL
Victory Sunray Plate
Blue/Gold - Engraves Gold
These are discontinued plaques. There is a limited availability left. Not all colors have all sizes left.
Item # CFPPP816()SPU
Victory Sunray Plate
Purple/Silver - Engraves Silver
Item # CFPPP816()SBL
Victory Sunray Plate
Blue/Silver- Engraves Silver Item # CFPPP816()SSM
Victory Sunray Plate
Smoke/Silver - Engraves Silver
CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
INDICATE PLAQUE SIZE DESIRED. Royal Blue/ Gold Plate LASER ENGRAVES GOLD Red/Gold Plate
LASER ENGRAVES GOLD
LASER ENGRAVES GOLD Black/Gold Plate
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Plate
Black/Gold Plate
LASER ENGRAVES GOLD
Plate
The Victory Star Marble Plate is discontinued. All plate sizes aren’t available. Please call for inventory.
INDICATE PLAQUE SIZE DESIRED.
DISCONTINUED CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
The Art Plates have been discontinued. Please call to check inventory.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
The Teardrop Plates have been discontinued. Please call to check inventory.
INDICATE PLAQUE SIZE DESIRED.
CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
CHERRY PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
DISCONTINUED CHERRYACTIVITY PLAQUES
Item # CFP68ZAP1 BASEBALL
PROFILE
Item # CFP68ZAP2 BASKETBALL
These are discontinued plates with a limited quantity available.
Item # CFP68ZAP4 CHEERLEADING
Theme Plates include gold laser engraving. Engrave area is approximately 2” x 3”
This Plaque is made of Particle Wood with an Elegant Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Item # CFP68ZAP7 GOLF Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
CHERRYACTIVITY PLAQUES
Plaques include gold laser engraving. Engraving area is approximately 2” x 3”
No additional cost for engraving in the 2” diameter circle.
This is a discontinued item with a limited quantity available.
PROFILE
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
DISCONTINUED CHERRY DESIGNER ACTIVITY
Item # CFP68DAP24
Item # CFP68DAP31
These are discontinued plates with a limited quantity available.
This Plaque is made of Particle Wood with an Elegant Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges. The engraving area is approximately 3” wide x 2-1/2” high and engraves gold.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
CHERRY PLAQUES WITH DISCONTINUED HI-DEFINITION PLATES
Brass Plated Steel Plates with Laserbrite™ engraving area and Florentine Highlights. Plates laser engrave gold and are mounted on a Cherry Finish Plaque made of 5/8” thick particle wood.
CFP57ZA46GOLF
Approximate Engrave Area: Small Plaque: 2-1/2” x 5” Large Plaque: 3-1/2” x 7”
CFP57ZA46SCCR
Repeat Setup Fee: $25(V) BASKETBALL Item # CFP57ZA46BSKL Item # CFP79ZA68BSKL BASEBALL Item # CFP57ZA46BSBL VOLLEYBALL Item # CFP57ZA46VOL
These are discontinued plates with a limited quantity available.
Sizes: 5” x 7” Plaque with 3-7/8” x 5-7/8” Plate. 7” x 9” Plaque with 5-7/8” x 7-7/8” Plate.
CFP57ZA46TNNS
Setup Fee: $50(V) Personalization: $3(V)
BLACK FINISH PLAQUES
This plaque is made of particle wood with a solid black matte finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges. Plates have Florentine Highlights.
ECLIPSE BLACK PIANO FINISH PLAQUES
BLACK PIANO FINISH SQUARE CORNER PLAQUES
Setup Fee: $50(V)
Plaques are 3/4” thick and have a keyhole on 2 sides.
Plaque Edge Profile
Designed with felt back for added elegance.
Personalization: $3(V)
Repeat Setup Fee: $25(V)
DISCONTINUED BLACK PIANO FINISH ROUND CORNER PLAQUES
Red/Gold Plate
Engraves Gold
Royal Blue/ Gold Plate
Engraves Gold
Setup Fee: $50(V)
Plaques are 3/4” thick and have a keyhole on 2 sides.
Plaque Edge Profile
Designed with felt back for added elegance.
Black/Gold Plate
Engraves Gold
Personalization: $3(V) Repeat Setup Fee: $25(V)
ROSEWOOD & BLACK PIANO FINISH PLAQUES BOTH
Solid wood plaques with a Multi-Coat, Buffed Lacquer Finish on both front and back. High gloss piano finish on both sides for “Premium” Finish. Key holed on edges. Can be hung vertically or horizontally.
Plaque Edge Profile
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
DISCONTINUED ROSEWOOD PIANO FINISH ROUND CORNER PLAQUES
Red/Gold Plate
Engraves Gold
Royal Blue/Gold Plate
Engraves Gold
Plaques are 3/4” thick and have a keyhole on 2 sides.
Plaque Edge Profile
Black/ Gold Plate
Engraves Gold
Setup Fee: $50(V) Personalization: $3(V)
Repeat Setup Fee: $25(V)
ROSEWOOD PIANO FINISH SQUARE CORNER PLAQUES
Plaques are 3/4” thick and have a keyhole on 2
Plaque Edge Profile
Designed with felt back for added elegance.
Setup
Repeat
ECLIPSE ROSEWOOD PIANO FINISH
Rosewood Finish Piano Plaques are 3/4” thick and have a keyhole on two edges of the back. The plaque can be hung either vertically or horizontally. Plates are brass with Laserbrite™ engraving area and Florentine Highlights.
GENUINE WALNUT STEP-EDGE & 45 DEGREE BEVEL
-
# GWPP170-BK (Bevel)
# GWPP170-BL (Bevel)
# GWPP170-BU (Bevel) Florentine Plate Florentine Plate Florentine Plate
GWST - Step Edge Profile
GW - 45 Degree Bevel Edge Profile
This plaque has been discontinued and only the 9” x 12” plaque remains.
Plaques are 3/4” thick and have a keyhole on 2 sides. So it can be hung either vertically or horizontally.
Setup Fee: $50(V) Repeat Setup Fee: $25(V) Personalization: $3(V) Labels: $2(V)
GENUINE WALNUT PLAQUES
ELLIPTICAL EDGE ROUND CORNER
Florentine Plate Florentine Plate
Plaque Edge Profile
Plaques are 3/4” thick and have a keyhole on 2 sides.
ELLIPTICAL EDGE SQUARE CORNER
Plaque Edge Profile
Plaques are 3/4” thick and have a keyhole on 2 sides.
Plate
Note: The Square Corner Plaque is not available in 6” x 8”.
Setup Fee: $50(V)
Repeat Setup Fee: $25(V) Personalization: $3(V) Labels: $2(V)
ALDER PLAQUES
Genuine Red Alder & Genuine Walnut
Laser engraved directly into the Plaque. Engraving color varies.
Plaque Edge Profile
Alder Plaques have a Double Roll Beveled Edge, are 3/4” thick, and have a keyhole on 2 edges. Can be hung vertically or horizontally.
Genuine Red Alder
Plaque Edge Profile
Laser engraved directly into the Plaque. Engraving color varies.
Alder Plaques have a Double Roll Beveled Edge, are 3/4” thick, and have a keyhole on 2 edges. Can be hung vertically or horizontally.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
DISCONTINUED VALUE CHERRY FINISH PLAQUES
This Plaque is made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges.
Setup Fee: $50(V)
Personalization:$3(V)
Repeat Setup Fee: $25(V)
GENUINE BAMBOO PLAQUES
The “Green” Alternative
Bamboo is a certified renewable resource. Blank Engraved
Plaque Edge Profile
Laser engraved directly into the plaque. Engraving color varies from piece to piece..
All Plaques on this page have a Double Roll Beveled Edge, are 3/4” thick, and have a keyhole on 2 sides on back.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V) Color Fill: $8(V)
DISCONTINUED BAMBOO PLAQUES WITH IRON STAND
The “Green” Alternative Bamboo is a certified renewable resource.
Item # WP812HC Bamboo Plaque with Iron Stand 12-1/4” Tall Plaque Size: 7-1/2” x 7-1/2” x 3/8” thick
Laser engraved directly into the Plaque. Engraving color varies.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V) Color Fill: $8(V)
CHERRY FINISH PLAQUE WITH DYE SUBLIMATED PLATES
This Plaque is made of Particle Wood with an Elegant Cherry Finish. The edges are beveled. The plaques are 5/8” inch thick and have key holes in the back on two edges. The Unisub® aluminum plate is dye sublimated.
2024 “A” LEAGUE CHAMPIONS L-R:
Cherry Plaque & Oak Plaque
PROFILE
Walnut Plaque
Achievement Award
“Most Improved” 2024 GFremont Fire Department
Plaque includes one full color dye sublimated image.
Walnut Plaque ECW Add $1.00 (R) Oak Plaque OKP Add $2.00 (R)
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
DISCONTINUED DYE SUBLIMATED PLAQUES
These Plaques feature a cove edge and keyholes for wall hanging. Finish of sublimation material is gloss white. 5/8” thick. MDF material. MDF is medium density fiber board made of fine wood particles and glue.
Plaque includes one full color dye sublimated image.
Setup Fee: $50(V)
Repeat Setup Fee: $25(V) PMS Match: $30(V) per color Personalization: $3(V)
DISCONTINUED
ROSEWOOD PIANO FINISH SCROLL PLAQUES
PSRPP170-BK Florentine Plate
SCROLL PLAQUE
PSRPP170-BL Florentine Plate
PSRPP170-BU Florentine Plate
Oak with a Rosewood Piano Finish.
Keyhole on the back for vertical hanging only. The back is black velvet. PSR1 will fit into a 8” x 10” velvet bag, the PSR2 will fit into the 10-1/2” x 13” velvet bag and PSR3 will fit into a 12” x 15” velvet bag. See page 998 & 999 for velvet bags.
Setup Fee: $50(V)
Personalization: $3(V)
Repeat Setup Fee: $25(V)
ROSEWOOD PIANO FINISH STANDING PLAQUES
Choice of Plate Color - Black, Blue, or Burgundy. All Plates have a Gold Decorative Border.
Setup
Personalization:
BLACK PIANO FINISH STANDING PLAQUES
Choice of Plate Color - Black, Blue, or Burgundy. All Plates have a Gold Decorative Border.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
COLORED WOODGRAIN PLAQUES
Item # WDBUPP170BK Blue Woodgrain Florentine Plate
View Of Plaque Only
Blue Woodgrain Plaque
View Of Plaque Only
Item # WDGNPP170BK Green Woodgrain Florentine Plate Green Woodgrain Plaque
View Of Plaque Only
Item # WDRDPP170BK Red Woodgrain Florentine Plate Red Woodgrain Plaque
Item # WDBUPP170BL Blue Woodgrain Florentine Plate
Item # WDGNPP170BL Green Woodgrain Florentine Plate
Item # WDRDPP170BL Red Woodgrain Florentine Plate
Item # WDBUPP170BU Blue Woodgrain Florentine Plate
Item # WDGNPP170BU Green Woodgrain Florentine Plate
Item # WDRDPP170BU Red Woodgrain Florentine Plate
Plaques are 5/8” thick with keyholes on the back for vertical or horizontal display. Indicate Plaque size and color also the plate color desired. Plaque Edge Profile
Setup Fee: $50(V)
Personalization: $3(V) Repeat Setup Fee: $25(V)
WALNUT STEP-EDGE PLAQUES WITH METAL SCROLL FRAME
Can be horizontal.
These are discontinued items and have a limited quantity available.
CSP912
9” x 12” Walnut Plaque 8” x 10-1/2” Metal Scroll 4-7/16” x 5-7/8” Plate
CSP1215
12” x 15” Walnut Plaque 9” x 12-1/2” Metal Scroll 5-3/8” x 7-3/8” Plate
Setup: $40(V) Personalization: $3(V) Repeat Setup: $20(V)
SDN11
SLIDE-IN FRAME PLAQUES
PHOTOS OR CERTIFICATES SIMPLY SLIDE IN.
Clear Plastic Window Provides Protection and Visibility
SDN12
Plate Sizes:
3“ x 7” (#497-49)
3-1/2” x 8-1/2 (#498-49)
Attached with four gold screws.
Plate size: 3” x 5’’ (#LE35BK) Adhered
Can hang horizontally or vertically!
SDN19
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup: $25(V)
Price includes one laser engraved plate on all plaques except SDN13, SDN19, & SDN33. (R)
GAVEL PLAQUES
-10
9” x 12” Walnut Finish Plaque
An Engraved Black Plate (LE35BK) is included. Engraving area is approximately 2” x 4”.
-30PL
An Engraved Black Plate (Replacement Plate FL3-46) is included. Engraving area is approximately 2-1/2” x 4-1/2”.
9” x 12” Genuine Walnut Plaque
An Engraved Black Plate (LE35BK) is included. Engraving area is approximately 2” x 4”.
-40PL 9” x 12” Premium Quality
Rosewood Piano Finish Plaque.
An Engraved Black Plate (Replacement Plate FL3-46) is included. Engraving area is approximately 2-1/2” x 4-1/2”.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup Fee: $25(V)
CAST ALUMINUM PLAQUES
Note: Plates for the 3” x 9” plaques will come ready to assemble after the plaque is attached. (Stainless Steel Screws included.)
Plate Engraves Black Silver Plate Engraves Black Silver Plate Engraves Black
Bench Plaques
Memorial Plaques
Historical Plaques
Dedication Plaques
CAP46FB-BK 4” x 6”
CAP68FB-BK 6” x 8’
CAP810FB-BK 8” x 10”
Default Plate is Metalgraph Plus Brushed Stainless Steel with a Black core. MP922-314.
Flat Black Cast Aluminum Plaque with Raised Double Bronze or Silver Border and a recessed area for mounting an engraved plate which is included.
CAP46FB-BRZ 4” x 6”
CAP68FB-BRZ 6” x 8”
CAP810FB-BRZ 8” x 10”
Default Plate is Metalgraph Plus Brushed Antique Gold with a Black core. MP922-764.
WARNING: Cancer and Reproductive Harmwww.P65Warnings.ca.gov
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup: $25(V)
CAST ALUMINUM STAKE PLAQUES
Border Silver Border
CAP46SM-BK 4” X 6”
CAP68SM-BK 6” X 8”
CAP810SM-BK 8” X 10”
Cast Aluminum Plaque with Raised Double Silver Border and a recessed area for mounting an engraved plate. A 24” Aluminum Stake is included and attaches to the back of the plate.
Cemetery Markers
Garden Dedication
Botanical Gardens
Pet Memorials
Memorial Plaques
Historical Plaques
Dedication Plaques
Tree Dedication
CAP46SM-BRZ 4” X 6”
CAP68SM-BRZ 6” X 8”
CAP810SM-BRZ 8” X 10”
Cast Aluminum Plaque with Raised Double Bronze Border and a recessed area for mounting an engraved plate. A 24” Aluminum Stake is included and attaches to the back of the plate.
Default Plate is Metalgraph Plus Brushed Stainless Steel with a Black core. MP922-314.
Stake Size
4” x 6” Plaque - 1/4” Dia. 6” x 8” Plaque - 3/8” Dia. 8” x 10” Plaque - 3/8” Dia.
WARNING: Cancer and Reproductive Harmwww.P65Warnings.ca.gov
Default Plate is Metalgraph Plus Brushed Antique Gold with a Black core. MP922-764.
Setup Fee: $50(V) Personalization: $3(V) Repeat Setup: $25(V)
LASER ENGRAVED LEATHERETTE PLAQUES
Plaques have felt back and keyholes for hanging. Horizontally or Vertically.
Available in Dark or Light Brown Lasers to a Black Finish
CERTIFICATE FRAMES ONLY
Solid Black Plastic Certificate Frames with Glass Face.
Frame size: 9-5/8” x 12-1/8”
Holds 8-1/2” x 11” Certificate. Frames can hang or stand horizontally or vertically.
Certificate not included.
The CF01 and CF02 are discontinued items and have a limited quantity available.
Com21
Cherry Finish with Gold Slide-in Frame.
Frame Size: 13-1/4” x 10-3/4”
Slide in Plaque
Holds 8-1/2” x 11” Certificate. Plaque size: 10-1/2” x 13”
Open at top for certificate slide-in Frames can hang horizontally or vertically.
Certificate not included.
Z7 Certificate Holders
Certificate size; 8-1/2” x 11” (Not included) Clear poly window. Overall thickness is approximately 1/8”. Made of a thin sheet of plastic between two pieces of foil wrapped cardboard. Can hang or stand vertically or horizontally. Clear poly window.
CERTIFICATES
COMPLETED CUSTOM PRINTED 8-1/2” x 11” CERTIFICATES
CERT101 - Gold
CERT104 - Green
CERT102 - Blue
CERT106 - Red
Custom full color printed 24# Paper
Setup Fee: $50(V) Personalization: $3(V)
Repeat Setup: $25(V)
PLAQUE EASELS
Plastic Easel for displaying Plaques, Trays. Signs, etc.
Hinged design snaps into the open position.
PLAQUE/SIGN HOLDERS
Item # PLS01
Holds signage and tiles up to 5/16” thick. Black only
Item # PLS02
Plaques up to 7/8” thick
Designed to hold plaques up to 9” x 12”. Black only
FOAM POUCHES AND EASELS
FOAM POUCHES
Self-Adhesive Plaque Easels
WALNUT FOILED PLAQUE BOXES
The Ultimate In Plaque Boxes! Holds Plaques Up to 1” Thick
RECOGNITION WINDOW BOXES
Clear Poly Window for Maximum Protection & Visibility.
Locking Tab Design
Holds Plaques Up to 7/8” Thick
BLANK VELVET BAGS
FOLD-OVER VELVET BAG
Fold-over design secures plaque inside. Material: 100% Polyester Velvet. Black Only.
Wt: Approx. 1 oz.
DRAWSTRING VELVET BAG
Drawstring design secures award inside. Material: 100% Polyester Velvet Award not included. Black Only.
Wt: Approx. 1 oz.
EMBROIDERED VELVET BAGS
FOLD-OVER VELVET BAG
Fold-over design secures plaque inside. Material: 100% Polyester Velvet. Plaque not included. Black Only.
Wt: Approx. 1 oz. Includes 7000 stitches of embroidery in one location.
Standard Setup Fee: $20(V)
Repeat Setup Fee: $10(V)
Applicable when no digitizing is required, a .dst file is provided requiring no editing, or using one the standard embroidery fonts on page 5. For digitizing costs, see page 5.
For other options see page 1.
DRAWSTRING VELVET BAG
Drawstring design secures award inside. Material: 100% Polyester Velvet Award not included. Black Only.
Wt: Approx. 1 oz. Includes 7000 stitches of embroidery in one location
Standard Setup Fee: $20(V)
Repeat Setup Fee: $10(V)
Applicable when no digitizing is required, a .dst file is provided requiring no editing, or using one the standard embroidery fonts on page 5. For digitizing costs, see page 5.
For other options see page 1.
DISCONTINUED PLAQUES
These Plaques are made of Particle Wood with a Cherry Finish. The edges are beveled. The plaque is 5/8” inch thick and has key holes in the back on two edges. Plate is a high relief plate. Item # - CFP810RF5-168 Cherry Plaque
# - CFP68RF5-346 Cherry Plaque Item # - CFP810RF5-468 Cherry Plaque
DISCONTINUED PLAQUE MOUNTS
DISCONTINUED DRAWSTRING VELVET BAGS
BLANK
Wt: Approx. 1 oz. This is a discontinued
a
Drawstring design secures award inside. Material: 100% Polyester Velvet Award not included. Black Only.
EMBROIDERED
Drawstring design secures award inside. Material: 100% Polyester Velvet Award not included. Black Only. Wt: Approx. 1 oz. Includes 7000 stitches of embroidery in one location
Standard Setup Fee: $20.00(V)
Applicable when no digitizing is required, a .dst file is provided requiring no editing, or using one the standard embroidery fonts on page 5. For digitizing costs, see page 5. For other options see page 1.