Telescopic Conveyor Applications In Thermal Power Plant
Telescopic Conveyor
Requirements for conveyor belts The Telescopic conveyor belt is the main equipment for transporting coal and lime into the thermal power plant. Therefore, it has high-security requirements. Generally, the entire transit line is equipped with a twochannel sideband conveyor, one is used, another is a backup application device.
This coal transportation system must be equipped with a sidewall belt conveyor. By using a sidewall-belt conveyor in a thermal power plant, the process can not only be simplified, but also the costs can be saved.
Features of the conveyor belt in the power plant As the power station imposes high demands on the safety of the equipment, the technical requirements for side conveyors are as follows:
1. There are other requirements for the Telescopic conveyor when collecting, transporting or distributing materials. For example, if the conveyor belt is used to obtain materials, the speed of the belt should not be too high for it, When used to transport materials. the rubber of the surface coating of the belt must be properly thickened.
2. The speed of the tape should be low. The conveyor belt is usually located in the workshop and therefore has high requirements for controlling coal dust. National and foreign practical experience, it is better to accept lower speed.
3. After installing this machine, it rarely changes its layout.
4. The different types of coal have different requirements for conveyor belts. For example, a large particle size of carbon requires a high-quality impact roll. Requires more dust guide sheet with coal and good seal with low water.
For Industrial Automation Solutions and telescopic conveyor contact Nihva Technologies Pvt. Ltd. 020 6630 4033
www.nihva.com
Contact Us: Nihva Technologies Pvt. Ltd. Plot No. 187,1st floor, G block, Thermax Chowk, Above Renault Showroom, MIDC, Pimpri-Chinchwad, Maharashtra-411019
www.nihva.com
Thank You!