COMPONENTS

[ COMPONENTS ] FISPPS6 PIN PUNCH SET

• Includes six pin punches, machined from solid bar stock. Can used with magnetic drivers including Fix It Sticks tools or any 1/4” driver • Sizes include 1/16”, 3/32”, 1/8”, 5/32”, 3/16” and 1/4”

FISPPSB6P BRASS PIN PUNCH SET

• Includes six pin punches, machined from solid bar stock. Steel base insert enables them to be used with magnetic drivers including Fix It Sticks tools or any 1/4” driver • Sizes include 1/16”, 3/32”, 1/8”, 5/32”, 3/16” and 1/4”

[ FISPPS6 ]

FISRPS6P ROLL PIN PUNCH SET

• Includes six pin punches, machined from solid bar stock. Can used with magnetic drivers including Fix It Sticks tools or any 1/4” driver • Sizes include 1/16”, 3/32”, 1/8”, 5/32”, 3/16” and 1/4”

[ FISPPSB6P ]

[ FISRPS6P ]

[ FIS-SJACK ]

[ FISBLAB ]

[ FIS-MAGP ] [ COMPONENTS ] FIS-SJACK SCOPE JACK

• Quickly levels optics • Works on any scope with a flat section under the turrets. • Needs a minimum of 1/4” clearance between NATO/Pic rail and scope. • The NATO/Pic rail must be accessible under the optic.

FISBLAB BUBBLE LEVEL SET

Level your optics with machined aluminum levels kit includes: • Magnetic level • NATO/Pic rail level/anti-cant device • Protective foam carrier with pouch

• Easy way to keep track of loose screws / bits when in the field • Velcro on the front allows patches to be attached. • Patch can be used directly on case, or flipped over and used as a tray.

FIS-MAGP MAGNETIC VELCRO PATCH

[ COMPONENTS ] FISPBP POUH BENCH BLOCK

• Features non-slip feet and velcro strips which allow the block to be integrated in our XXL Carry Case

FIS-RBO R700 BOLT OPENER

• Access your Remington® 700 firing pin quickly and easily with the Fix It Sticks custom Remington 700 Bolt Opener bit. Featuring a steel body with polymer bushing to protect the bolt plug from damage, the bit levers the firing pin head with a “bottle opener” action. The metal 1/4” hex base works with any 1/4” driver including Fix It Sticks tools or our T-Way Wrench.

[ FISPBP ]

FISAR15-ABP3 AR-15 BIT PACK

• Bolt Carrier Group Scraper Bit • Castle Nut Wrench Bit • A2 Front Sight Bit

[ FIS-RBO ]

[ FISAR15-ABP3 ]

[ FISARBCGSP ] [ FISARBCGSP-308 ]

[ FISARCNWP ]

[ FISCBAR15P ]

[ FIS38AWP ] [ COMPONENTS ] FISARBCGSP | FISARBCGSP-308 BOLT CARRIER GROUP SCRAPER

• Available in either .223 or .308

FISARCNWP CASTLE NUT WRENCH

• Works with any standard 1/4” driver including Fix It Sticks tools or our T-Way Wrench.

• Works with any standard 1/4” driver including Fix It Sticks tools or our T-Way Wrench.

• LaRue Style Mounts

FISCBAR15P A2 SIGHT ADJUSTER

FIS38AWP 3/8 WRENCH

[ COMPONENTS ] FISHHBP HAMMER HEAD

• Turn your Fix It Sticks tools into a lightweight hammer. The steel insert in the base enables it to be used with magnetic drivers.

FISCPMP CLEANING PICK

• Works with any standard 1/4” driver, including Fix It Sticks tools or our T-Way Wrench. It’s also threaded to accept 8/32” rods.

[ FISHHBP ]

FISMWP MINI PRY BAR

• Works with any standard 1/4” driver, including Fix It Sticks tools or our T-Way Wrench. • Cut-outs in the Mini Pry Bar let you use it as a 1/4”, 5/16”, or 3/8” wrench.

[ FISCPMP ]

FISARCBP CLEANING BRUSH

• Works with any standard 1/4” driver, including Fix It Sticks tools or our T-Way Wrench. • 8-32 threaded Steel insert for use with magnentic drivers and cleaing rods.

[ FISMWP ]

[ FISARCBP ]

[ FIS832TAS ]

[ FISSCWP ]

[ FISKBP ]

[ FISBOP ] [ COMPONENTS ] FIS832TAS 8-32 THREAD ADAPTER SET

• Plug your 8-32 accessories into the Fix It Sticks system with this 2-piece thread adapter set. Notched for use with locking hex collars, these adapters work with any standard 1/4” driver and are designed for use with our threaded accessories (rods, brushes, etc.).

FISSCWP CHOKE TUBE WRENCH

• Remove and install choke tubes .410-10ga

• Includes both ceramic and carbide V-Style sharpeners, set at 22.5 degrees for a 45 degree inclusive angle. The Knife Sharpener Bit works with Fix It Sticks tools as a handle or any standard 1/4” driver

• Enjoy a beverage after a day at the range.

FISKSBP KNIFE SHARPENER

FISBOP BOTTLE OPENER

[ COMPONENTS ] FISAPBP AIMPOINT BIT

• Polymer bit with steel insert for magneting drivers.

FIS1911P 1911 BUSHING WRENCH

• Gov’t and Officer versions.

[ FISAPBP ]

FISBHWP BROADHEAD WRENCH

• Polymeer bit with steel insert for magnetic drivers.

[ FIS1911P ]

FIS65A 6.5 CREEDMOOR ADAPTERS

• Brass adapters for the Fix It Sticks cleaning rod system.

[ FISBHWP ]

[ FIS65A ]

[ FISGL ]

[ FISGMPT ]

[ FIS-GL-CP ]

[ FISGLCTP ] [ COMPONENTS ] FISGL FRONT SIGHT TOOL FOR GLOCK®

• Machined from solid steel bar stock, the 3/16” hex thin wall nut driver features an integrated magnet to hold the screw securely in place.

FISGMPT MAG PLATE TOOL FOR GLOCK®

• Easily remove mag plates from factory Glock® magazines • Crafted from steel with an electroless nickel finish, this tool works with Fix It Sticks handles or any 1/4” driver • Not compatible with 30 round magazines or extended baseplates

• Front Site Tool • 3/32 Punch • Available with 6 in-lb Torque Limiter

Additional Part Numbers w/ 6 inch lb torque limiter:

FIS-GL-CP | FIS-GST-CP ACCESSORY PACK FOR GLOCK®

[ FIS-GST-TL]

FISGLCTP CHANNEL LINER TOOLS FOR GLOCK®

• Channel liner removal and installation tools • For use with the Ratchet T-Way with Locking Hex only