Epoxy’s & Activators

SY-150 5min Quick Set Epoxy

Convenient easy to use dual syringe epoxy. Permanently bonds a variety of materials in 4-6 minutes.

• Perfect for Bonding: Metal, China,Glass and Plastic

• Strength 1200 psi

SY-5145 5min Metal Epoxy

Industrial strength fast setting metal epoxy. 4-6 minutes positioning time and can be handled in 30 minutes. Can be drilled tapped, sanded and filed after full cure.

• Works Best on: Stainless Steel, Copper, Steel and Aluminum

• Strength 2500 psi

An acetone based solvent for use as a surface cleaner and activator prior to the application of adhesive. Also used for removing adhesive and cleaning applicator equipment.

A heptane based solvent activator designed to cure excess adhesive outside the bondline. Can be applied during or after assembly to increase cure speeds and the gap filling properties of cyanoacrylate adhesives.

A single component solvent based polyolefin primer. Increases bond speed and strength of Ultraloc cyanoacrylates when used on low energy plastics such as polyethylene, polypropylene & silicone rubber.

Solvent based activator primer specially formulated to accelerate the curing of Ultraloc’s anaerobic adhesive range. On part life of up to 7 days.

Solvent based activator primer specially formulated to accelerate the curing of Ultraloc’s anaerobic adhesive range. On part life of up to 30 days