UL(DLC) Approved T8 Glass tube -------AC compatible
I.Features ■
Plug & Play, no need for rewiring.
■ AC universal compatible.
■
No UV, no hissing or flickering. Mercury and lead free.
■ 50,000 hours lifetime. Lumen maintenance >95% after 6000 hours.
■ Anti electric shock & electric leakage. Hi-pot and EMC test passed. Insulation class I.
www.syhdee.com
We Concentrate on LED Tubes Concentration secures best quality
Shenzhen Syhdee Manufactory Co., Ltd. Huizhou Syhdee Manufactory Co., Ltd.
II.Specifications
(II- 1) Parameters Product
T8 Compatible Glass Tube
Item No.
SYH-GL08-AC0610
Length A (mm)
589
1198
Length C (mm)
603
1213
SYH-GL08-AC1212
Input Voltage Wattage
SYH-GL08-AC1215
10W
12W
15W 0.9~0.98
Output
DC45-60V, 3000K:120lm/w
4000K:125lm/w
4000K:130lm/w
4000K:130lm/w
5000K:130lm/w
5000K:135lm/w
5000K:135lm/w SMD2835
54
105 >80
CCT
3000K /4000K /5000K
Beam Angle
150-270 °
Housing
Optical PC
Cap
G13
IP Rating
IP20
Operating Temperature
﹣20-45℃
Certificate
UL / CUL,DLC
91g
(II-2) Light Distribution Diagram www.syhdee.com
20W
3000K:120lm/w
CRI
N.W./PC
18W
3000K: 115lm/w
LED Type LED Qty
SYH-GL08-AC1220
AC100-277V 50/60Hz
PF
Luminous Efficiency
SYH-GL08-AC1218
161g
We Concentrate on LED Tubes Concentration secures best quality
(II-3) Light AAI Figure
www.syhdee.com
Shenzhen Syhdee Manufactory Co., Ltd. Huizhou Syhdee Manufactory Co., Ltd.
We Concentrate on LED Tubes Concentration secures best quality
Shenzhen Syhdee Manufactory Co., Ltd. Huizhou Syhdee Manufactory Co., Ltd.
III. Cautions 1. Installation to be performed by qualified service personnel only. 2. Installer must determine luminaire electrical rating matches the replacement lamp ratings. 3. This product is intended for dry indoor use only. Do not expose to explosive gas. 4. Do not expose wiring to sheet metal edges or other sharp objects.
VI. Installation Diagram 1. Make sure to turn power off by disconnecting the supply voltage. 2. Remove diffuser (if provided). 3. Remove the conventional fluorescent lamp and dispose of them properly. Note: Verify the existing ballast is listed on the sheet of tested ballasts of Syhdee. 4. Put T8 LED tube into lamp holders. 5. Replace diffuser (if removed in step 2). 6. Turn power on and check the light distribution angle.
2. In the future if the ballast out of work,
there’re two choices:
1) Buy a new ballast and put it on. Or 2) Cut off the out-of work ballast and rewire as the diagram below.
www.syhdee.com
We Concentrate on LED Tubes Concentration secures best quality
Shenzhen Syhdee Manufactory Co., Ltd. Huizhou Syhdee Manufactory Co., Ltd.
V. Packaging (1). EPE + Carton
(2) Inner Box +Carton
(3) Round box + Carton
Packing Information for (1) Length A (mm) Qty/CTN
1198
589 25pcs
5 pcs in one poly foam slot. totally 5 layers, then in one Poly bag.
CTN Sizes (mm)
670*210*215
1270*210*215
G.W./CTN (kg)
3.53kg
6.05kg
www.syhdee.com