Phototriac Coupler (APT) VDE
Please contact us about VDE certified products.
Phototriac Coupler (APT)
Phototriac Coupler for the Industrial Machinery, Consumer Electronics, and SSR Markets
1
4
1
3
2 3
1
4
1
6
2
3
2 3
4
2
ZC Zero-cross circuit
6
ZC Zero-cross circuit
4
FEATURES
TYPICAL APPLICATIONS
1. Two types available: Non zero-cross type and zero-cross type 2. Many package sizes available. 3. High dielectric strength. (Between input and output: SOP 3, 750 V; DIP 5,000 V) 4. This type is for both 100 and 200 V AC. 5. Terminal 5 of the DIP 6-pin type is completely molded.
1. Industrial equipment such as NC machines, chip mounter, robots and so on 2. AC fan-motor control 3. Control of heated-water motor and ush v alve for personal hygiene system 4. Heater control for copiers and other products 5. Triac driver for SSRs
TYPES 1. SOP Type Output rating* Repetitive peak ON-state RMS OFF-state voltage current
Type
AC type
600 V
50 mA
Type
Package size
Zero-cross Non zero-cross
SOP4pin
Part No. Picked from Picked from the 1/2-pin side the 3/4-pin side APT1211SX APT1211SZ APT1221SX APT1221SZ
Packing quantity in tape and reel 1,000 pcs.
Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suf x “X” or “Z” is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.) (2) For space reasons, the initial letters of the product number “APT” and “S” are omitted on the product seal. The package type indicator “X” and “Z” are omitted from the seal. (Ex. the label for product number APT1221SZ is 1221). * Repetitive peak OFF-state voltage and surge on current express the peak AC.
2. DIP Type Output rating* Type
Repetitive ON-state peak RMS OFF-state current voltage
Part No. Type
Package size
Zero-cross
Through hole terminal Tube packing style APT1211
APT1211A
Non zero-cross
APT1221
APT1221A
Zero-cross
APT1212
APT1212A
APT1222
APT1222A
DIP4pin AC type
600 V
100 mA
DIP6pin Non zero-cross
Surface-mount terminal Tape and reel packing style APT1211AX APT1211AZ (Picked from the (Picked from the 1/2-pin side) 1/2/3-pin side) APT1221AX APT1221AZ (Picked from the (Picked from the 1/2-pin side) 1/2/3-pin side) APT1212AX APT1212AZ (Picked from the (Picked from the 1/2/3-pin side) 4/6-pin side) APT1222AX APT1222AZ (Picked from the (Picked from the 1/2/3-pin side) 4/6-pin side)
Packing quantity Tube
Tape and reel
[DIP4pin] 1 tube contains 100 pcs. 1 batch contains 1,000 pcs. [DIP6pin] 1 tube contains 50 pcs. 1 batch contains 500 pcs.
[DIP4pin] [DIP6pin] 1,000 pcs.
Note: For space reasons the initial letters “APT” of the product number for the DIP 4-pin type, the letter “A”, which indicates the SMD terminal shape for the DIP 4-pin and 6-pin types, and the package type indications “X” and “Z” have been omitted from the product label. (Example: The label for product number APT1221AZ is 1221.) * Repetitive peak OFF-state voltage and surge on current express the peak AC.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Phototriac Coupler (APT) RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Input
Symbol APT1211S APT1221S APT1211(A) APT1221(A) APT1212(A) APT1222(A) IF 50 mA VR 6V
Item LED forward current LED reverse voltage Peak forward current
Repetitive peak OFF-state voltage ON-state RMS current* Non-repetitive surge current Total power dissipation I/O isolation voltage
Output
Temperature limits
IFP
1A
VDRM
600 V
IT(RMS) ITSM PT Viso
0.05 A 0.6 A 350 mW 3,750 V AC
Remarks
f = 100 Hz, Duty Ratio = 0.1%
0.1 A 1.2 A 500 mW 5,000 V AC
Operating
Topr
–40°C to +100°C –40°F to +212°F
Storage
Tstg
–40°C to +125°C –40°F to +257°F
AC In one cycle at 60Hz
Non-condensing at low temperatures
* Do not exceed 50 mA of ON state RMS current in case of following load voltage condition. APT1211, APT1221: more than 100 V AC; APT1212, APT1222: more than 120 V AC
2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item
Input
Output
Typical LED dropout voltage Maximum Typical LED reverse current Maximum Typical Peak OFF-state current Maximum Typical Peak On-state voltage Maximum Typical Holding current Maximum Critical rate of rise of Minimum OFF-state voltage
Symbol APT1211S, APT1211(A), APT1212(A) APT1221S, APT1221(A), APT1222(A) 1.18 V VF 1.3 V — IR 10 µA — IDRM 1 µA 1.3 V VTM 2.5 V 0.3 mA IH 3.5 mA dv/dt
500 V/µs
Trigger LED current* Maximum
IFT
10 mA
Zero-cross voltage** Maximum Transfer Maximum characteris- Turn on time*** tics
VZC
50 V 100 µs
I/O capacitance
Maximum
Ciso
1.5 pF
I/O resistance
Minimum
Riso
50 GΩ
*Recommended LED current IF = 20mA **Applicable part numbers: APT1211S, APT1211, APT1212. ***Turn on time
IF = 10 mA VR = 6 V IF = 0 VDRM = 600 V IF = 10 mA ITM = 0.05 A
VDRM = 600 V ×1/M2 VD = 6 V RL = 100 Ω IF = 10 mA IF = 20 mA VD = 6 V RL = 100 Ω f = 1 MHz VB = 0 500 V DC
—
TON
Condition
Note: For type of connection, see Page 35.
Input
90% Output Ton
DIMENSIONS
mm inch 0.5 .020
Recommended mounting pad (TOP VIEW) 4.4±0.2 .173±009
4.3±0.2 .169±.009
0.4 .016 2.54 .100
2.0±0.2 .079±.009
0.4 .016
6.8±0.4 .268±016 6.0 1.2 .236 .047
0.5 .020
0.1 .004
Terminal thickness = 0.15 .006 General tolerance: ±0.1 ±.004 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
0.8 .032 2.54 .100
Tolerance: ±0.1 ±.004
Phototriac Coupler (APT)
SCHEMATIC AND WIRING DIAGRAMS Notes: E1: Power source at input side; IF: Trigger LED forward current; VL: Load voltage; IL: Load current;
All Rights Reserved Š COPYRIGHT Matsushita Electric Works, Ltd.
Phototriac Coupler (APT) REFERENCE DATA 1. Effective on current vs. ambient temperature characteristics
2. Effective on current vs. ambient temperature characteristics
3. Effective on current vs. ambient temperature characteristics
Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1211S, APT1221S
Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1211, APT1221
Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1212, APT1222
120
50 40 30 20
100
120 VL
100V AC
Effective on current, mA
60
Effective on current, mA
Effective on current, mA
70
80 60
VL > 100V AC
40 20
10 0 –40
–20
0
20
40
60
80
0 –40
100
120V AC
80 60
VL > 120V AC
40 20
–20
0
Ambient temperature, °C
20
40
60
80
0 –40
100
–20
0
Ambient temperature, °C
5. Trigger LED current vs. ambient temperature characteristics
Trigger LED current: 10 mA; ON current: 50 mA (AC)
Load voltage: 6 V (DC); Load resistance: 100Ω
1.4
60
80
8
6
4
1.4
1.3 50mA 1.2
30mA 20mA
1.2
–20
0
20
40
60
80
0 –40
100
–20
Ambient temperature, °C
0
20
40
60
80
Ambient temperature: 25°C 77°F
100
50
10-5
10-7
10-9
30
40
50
10-13 0
20
40
60
80
100
0 –40
Trigger LED current: 10 mA (APT1211S)
Zero-cross voltage, V
50
40
30
20
10
–20
0
20
40
60
80
100
1
10. Zero-cross voltage vs. ambient temperature characteristics
0 –40
80
1.5
Load voltage, V
Trigger LED current, mA
60
0.5
10-11
20
40
2
Hold current, mA
Off state leakage current, A
150
20
9. Hold current vs. ambient temperature characteristics
0.001
200
10
0
Ambient temperature, °C
8. Off state leakage current vs. load voltage
0
–40 –20
Ambient temperature, °C
Load voltage: 6V (DC) Load resistance: 100Ω
Turn on time, µs
1
100
7. Turn on time vs. trigger LED current
0
10mA
1.1
2
1 –40
100
1.5 LED dropout voltage, V
Trigger LED current, mA
1.6
40
6. LED dropout voltage vs. ambient temperature characteristics
10
1.8
20
Ambient temperature, °C
4. On voltage vs. ambient temperature characteristics
On voltage, V
VL
100
100
Ambient temperature, °C
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
–20
0
20
40
60
80
Ambient temperature, °C
100