VDE
JE-X RELAYS
COMPACT ECONOMICAL POWER RELAYS
22 .866
FEATURES
14 .551
• Compact size - Height Max. 18.7 mm .736 inch lower than JY relay (22.5 mm) (.886 inch) • High contact capacity — 5A 125 V AC • Safety-oriented between coil and contact terminals • All plastic materials: UL flame retardance 94V-0 • VDE, TÜV also approved
18.7 .736
mm inch
TERMINAL LAYOUT Distance of 9.16 mm .360 inch between common and coil terminals and 8.9 mm .350 inch between contacts give room to the land diameter width when the relay is mounted on PC board, and allow design of patterns with insulation distances of 6 mm .236 inch between common and coil and 5.9 mm .232 inch between contacts.
• 3 mm .118 inch or more insulation distance for close mounting can be kept easily with JE-X relays.
0.9 .035
R1 3 dia. .118 dia.
Coil
9.16 .361 6.16 .243
8.9 .350 3 dia. .118 dia.
N.O.
4.45 3 dia. .175 .118 dia. 5.9 .233 4.45 N.C. COM .175
In case of 3 mm .118 inch land diameter
N.C.
R2 3 .118
N.O.
8.9 .350
N.C.
N.O.
1.3 dia. .051 dia.
Coil
mm inch
mm inch
SPECIFICATIONS Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1A) Contact material Nominal switching capacity Rating Max. switching power (resistive load) Max. switching voltage Max. switching current Mechanical (at 180 cpm) Expected life (min. Electrical (at 20 cpm) operations) (at rated load)
Characteristics 1 Form A
1 Form C
100 mΩ Silver alloy 5 A 30 V DC, 5 A 125 V AC, 3A 250 V AC 750 VA, 150 W 250 V AC, 30 V DC 5A 5×106 105
Max. operating speed Initial insulation resistance*1 Between open contacts Between contacts and coil Surge voltage between coil and contact*3 Operate time*4 (at nominal voltage) Release time (without diode)*4 (at nominal voltage)
Initial breakdown voltage*2
Temperature rise (at 70°C)
Coil Minimum operating power Nominal operating power
196 mW 400 mW
Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10 mA *3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981 *4 Excluding contact bounce time *5 Half-wave pulse of sine wave: 6ms; detection time: 10µs *6 Half-wave pulse of sine wave: 6ms *7 Detection time: 10µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
Shock resistance
Functional*5 Destructive*6 Functional*7
Vibration resistance Destructive Conditions for operation, Ambient transport and storage*8 temp. (Not freezing and condensHumidity ing at low temperature) Unit weight
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
20 cpm (at 70°C) Min. 100 MΩ (at 500 V DC) 750 Vrms 1,500 Vrms Min. 5,000 V Approx. 10 ms Approx. 2 ms Max. 45°C with nominal coil voltage and at nominal switching capacity Min. 98 m/s2 {10 G} Min. 980 m/s2 {100 G} 98 m/s2 {10 G}, 10 to 55 Hz at double amplitude of 1.6 mm 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2.0 mm –40°C to +70°C –40°F to +158°F 5 to 85% R.H. Approx. 9.2g .32 oz
JE-X TYPICAL APPLICATIONS
ORDERING INFORMATION Ex. JE
• Home appliances Oven, range, dryer, heater, Air conditioner etc. • Automotive • Garage door opener • Personal computer • Programmable controller
1
X
N
DC12V
Contact arrangement
Pick-up voltage
1a: 1 Form A 1:1 Form C
N:70% of nominal voltage
H
Protective construction
Coil voltage
DC 5, 6, 9, H: Flux-resistant type 12, 24, 48 V
(Note) Standard packing: Carton 100 pcs. Case 500 pcs. UL/CSA, VDE approved type is standard.
TYPES Contact arrangement
Pick-up 70% V type Flux-resistant type JE1aXN-DC5V-H JE1aXN-DC6V-H JE1aXN-DC9V-H JE1aXN-DC12V-H JE1aXN-DC24V-H JE1aXN-DC48V-H JE1XN-DC5V-H JE1XN-DC6V-H JE1XN-DC9V-H JE1XN-DC12V-H JE1XN-DC24V-H JE1XN-DC48V-H
Coil voltage 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 48 V DC 5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 48 V DC
1 Form A
1 Form C
COIL DATA (at 20°C 68°F) Nominal voltage, V DC
Pick-up voltage, V DC (max.)
Drop-out voltage, V DC (min.)
5 6 9 12 24 48
3.5 4.2 6.3 8.4 16.8 33.6
0.5 0.6 0.9 1.2 2.4 4.8
Nominal operating currrent, mA (±10%) 80 67 44 33 17 8.3
Nominal operating power, mW 400 400 400 400 400 400
Coil resistance, Ω(±10%) 62.5 90 202 360 1,440 5,760
Maximum allowable voltage, V DC (at 70°C) 6.5 7.8 11.7 15.6 31.2 62.4
DIMENSIONS
mm inch PC board pattern (Bottom view) 14 .551
5-1.3 dia. 5-.051 dia.
22 .866
7.62 .300
4.45 .175 4.45 .175
10.16 .400
Tolerance: ±0.1 ±.004
Max. 18.2 .717
Schematic (Bottom view)
0.5 .020 3.9 .154 0.8 .031 3.9 .154
1 10.16 .400
0.3 .012 7.62 .300
COM 3
2 1.1 .043
0.4 .016
7.62 .300
1 COM 3
0.8 .031
7.62 .300 N.O. 4 1.2 .047 N.C. 5
2
4.45 .175 4.45 .175
N.O. 4
5 N.C.
Note: The above shows 1 Form C type, and No. 5 terminal is eliminated on the 1 Form A type.
Dimension: Max. 1mm .039 inch: 1 to 5mm .039 to .197 inch: Min. 5mm .197 inch:
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
General tolerance ±0.2 ±.008 ±0.3 ±.012 ±0.4 ±.016
JE-X REFERENCE DATA 1. Max. switching power
3. Coil temperature rise (at 30°C 86°F)
2. Operate and release time
Operate & release time, ms
Contact current, A
3
AC resistive load DC resistive load
1 0.5
10
Operate time Max. Min.
5 Release time
30
50
100
0
200250
80
100
Voltage, V
50 40 30 20
120
100
100 30°C 40°C
60°C 50
Life, ×104
60
125V AC resistive load
10
250V AC resistive load
40
30 100
110
130
150
Coil applied voltage, %V
1
0
1
2
3
4
5
110
130
150
Coil applied voltage, %V
5. Life curve
70
5A 3A 1.5A 0A
60
Coil applied voltage, %V
4. Coil temperature rise (Contact carrying current: 5 A)
Temperature rise, °C
Max. Min.
Temperature rise, °C
15 5
6
Contact current, A
NOTE Soldering should be carried out within 3 s at 350°C 662°F or within 5 s at 250°C 482°F.
For Cautions for Use, see Relay Technical Information.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.