Panasonic RD Relays by SYNsCON

RD (ARD)

NEW

26.5GHz, 18GHz COAXIAL SWITCH

RD COAXIAL SWITCHES (ARD)

FEATURES

TYPICAL APPLICATIONS

1. Excellent high frequency characteristics (SPDT, transfer) up to 26.5 GHz. 2. SPDT, transfer and SPST type is available 3. High sensitivity Nominal operating power: 840 mW (SPDT, Failsafe type) 1540 mW (Transfer, Failsafe type) 4. Long life: 5 × 106 (SPDT, transfer) 5. Latching type is also available

Wireless and mobile communication • Cellular phone base stations • Ampli er s witching Digital broadcasting • Broadcasting equipment Measurement instruments • All types of inspection equipment

SPECIFICATIONS Contact Arrangement Contact material Initial contact resistance

Rating

Contact input power*1

Indicator rating

Contact rating Initial contact resistance (Measured by 5V 100mA)

High frequency characteristics (Impedance 50Ω)

Expected life (min. operation)

V.S.W.R. (max.) Insertion loss (dB, max.) Isolation (dB, min.) Mechanical (at 180 cpm)

SPDT

Transfer Gold plating Max. 100mΩ

SPST

120W 2.2GHz (V.S.W.R. 1.2 or less, no contact switching) 150W 2.2GHz (V.S.W.R. 1.2 or less, no contact switching when cooling fan is used) —

120W 3GHz (V.S.W.R. 1.15 or less, no contact switching, ambient temperature 40°C [SPDT], 25°C [Transfer])#1 Max. 30V 100mA

Max. 5V 100mA Max. 1Ω

—

to 1 GHz

1 to 4

4 to 8

8 to12.4

12.4 to 18

1.1

1.15

1.25 0.3 70

1.35 0.4 65

1.5 0.5 60

0.2 85

18 to 26.5#2 1.7 0.8 55

5 × 106 5 × 106 (5W, to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2)

Electrical (at 20 cpm)

—

See “REFERENCE DATA” 104 104 (80W, to 2.2GHz, impedance 50Ω, V.S.W.R.; max. 1.2, ambient temperature; max. 40°C 104°F)

#1 Factors such as heating of the connected connector in uence the high frequency char acteristics; therefore, please verify under actual conditions of use. #2 18 to 26.5 GHz characteristics apply to the 26.5 GHz type only.

Characteristics SPDT

Initial insulation resistance*2 Between open contacts Between contact and coil Initial breakdown voltage*3 Between contact and earth terminal Between coil and earth terminal Operate time*4 (at 20°C) Shock resistance Vibration resistance Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature)

Functional*5 Destructive*6 Functional*7 Destructive Ambient temp Humidity

Unit weight (Approx.)

Transfer SPST Min. 1,000 MΩ (at 500 V DC) 500 Vrms for 1 min. 500 Vrms for 1 min. 500 Vrms for 1 min. 500 Vrms for 1 min. Max. 15ms Max. 20ms Max. 15ms Min. 500 m/s2 {50G} Min. 200 m/s2 {20G} Min. 1,000 m/s2 {100G} 10 to 55 Hz at double amplitude of 3mm 10 to 55 Hz at double amplitude of 5mm –55°C to +85°C –67°F to +185°F 5 to 85% R.H. 50g 1.76oz 110g 3.88oz 20g .71oz

Remarks *1 Please verify the usability of input power under actual conditions because heat generated from connectors can in uence connection. *2 Measurement at same location as “Initial breakdown voltage” section. *3 Detection current: 10mA *4 Nominal operating voltage applied to the coil, excluding contact bounce time.

*5 Half-wave pulse of sine wave: 11ms, detection time: 10µs. *6 Half-wave pulse of sine wave: 11ms *7 Detection time: 10µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

RD (ARD) ORDERING INFORMATION Ex.

Product name RD

Nominal operating voltage, V DC 0: to 3GHz (SPST) 00: Failsafe 4H: 4.5V (Failsafe, 1: to 18GHz (SPDT) 10: Latching (SPST) Latching type only) 2: to 18GHz (Transfer) 20: Latching (SPDT, Transfer) 05: 5V (Latching with 5: to 26.5GHz (SPDT) 51: Latching with TTL driver TTL driver type only) 6: to 26.5GHz (Transfer) (with self cut-off function) 12: 12V (SPDT, Transfer) 24: 24V Frequency

Operating function

HF data attached (SPDT, Transfer) Nil: Solder terminal Nil: No HF test data (SPDT, Transfer), attached Lead wire (SPST) Q: HF test data attached C: Connector cable (SPDT type only) Operation terminal

Note: Sealed types are also available. (SPDT type only)

TYPES 1. SPDT 1) Solder terminal Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

18GHz type No HF datasheet HF datasheet attached attached ARD1004H ARD1004HQ ARD10012 ARD10012Q ARD10024 ARD10024Q ARD1204H ARD1204HQ ARD12012 ARD12012Q ARD12024 ARD12024Q ARD15105 ARD15105Q ARD15112 ARD15112Q ARD15124 ARD15124Q

26.5GHz type No HF datasheet HF datasheet attached attached ARD5004H ARD5004HQ ARD50012 ARD50012Q ARD50024 ARD50024Q ARD5204H ARD5204HQ ARD52012 ARD52012Q ARD52024 ARD52024Q ARD55105 ARD55105Q ARD55112 ARD55112Q ARD55124 ARD55124Q

18GHz type No HF datasheet HF datasheet attached attached ARD1004HC ARD1004HCQ ARD10012C ARD10012CQ ARD10024C ARD10024CQ ARD1204HC ARD1204HCQ ARD12012C ARD12012CQ ARD12024C ARD12024CQ ARD15105C ARD15105CQ ARD15112C ARD15112CQ ARD15124C ARD15124CQ

26.5GHz type No HF datasheet HF datasheet attached attached ARD5004HC ARD5004HCQ ARD50012C ARD50012CQ ARD50024C ARD50024CQ ARD5204HC ARD5204HCQ ARD52012C ARD52012CQ ARD52024C ARD52024CQ ARD55105C ARD55105CQ ARD55112C ARD55112CQ ARD55124C ARD55124CQ

18GHz type No HF datasheet HF datasheet attached attached ARD2004H ARD2004HQ ARD20012 ARD20012Q ARD20024 ARD20024Q ARD2204H ARD2204HQ ARD22012 ARD22012Q ARD22024 ARD22024Q ARD25105 ARD25105Q ARD25112 ARD25112Q ARD25124 ARD25124Q

26.5GHz type No HF datasheet HF datasheet attached attached ARD6004H ARD6004HQ ARD60012 ARD60012Q ARD60024 ARD60024Q ARD6204H ARD6204HQ ARD62012 ARD62012Q ARD62024 ARD62024Q ARD65105 ARD65105Q ARD65112 ARD65112Q ARD65124 ARD65124Q

Note: Standard packing; Carton: 1 pc. Case: 20 pcs.

2) Connector cable Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

Note: Standard packing; Carton: 1 pc. Case: 10 pcs.

2. Transfer 1) Solder terminal Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

RD (ARD) 3. SPST Operating function

Failsafe

Latching

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24

Part No. ARD0004H ARD00012 ARD00024 ARD0104H ARD01012 ARD01024

Note: Standard packing; Carton: 1 pc. Case: 20 pcs.

COIL DATA (at 20°C 68°F) 1. SPDT 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 186.7 70.0 40.4

Nominal power consumption, mW 840 840 970

2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 155.6 62.5 37.5

Nominal power consumption, mW 700 750 900

3) Latching with TTL driver type (with self cut-off function) Nominal operating voltage, V DC 5 12 24

TTL logic level (see TTL logic level range) ON OFF 2.4 to 5.5V

0 to 0.5V

Switching frequency Max. 180 cpm (ON time : OFF time = 1 : 1)

2. Transfer 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 342.2 128.3 69.6

Nominal power consumption, mW 1540 1540 1670

2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 266.7 104.2 58.3

Nominal power consumption, mW 1200 1250 1400

3) Latching with TTL driver type (with self cut-off function) Nominal operating voltage, V DC 5 12 24

TTL logic level (see TTL logic level range) ON OFF 2.4 to 5.5V

0 to 0.5V

Switching frequency Max. 180 cpm (ON time : OFF time = 1 : 1)

3. SPST 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 400 150 75

Nominal power consumption, mW

1800

RD (ARD) 2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 400 150 75

• Operating voltage range (1) SPDT, Transfer type 1) Failsafe type

2) Latching type

Nominal power consumption, mW

1800

3) Latching with TTL driver type (with self cut-off function)

4.5 12 24 V V V 6 16 32

5 12 24 V V V 6.67 16 32

5.25 14 28

5.83 14 28

4.5 12 24

5 12 24

3.75 10 20

4.17 10 20

Nominal voltage 3

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0 –55–40 –20

Allowable range for use Recommended operation voltage range Recommended release voltage range

8 16

3.33

8 16

2.25

6 12

2.5

6 12

1.5

4 8

Allowable range for use

1.67

Allowable range for use

0.75

2 4

Recommended set/reset voltage range

0.83

Recommended set/reset voltage range

0 –55–40 –20

0 0

Nominal voltage

Nominal voltage 3

0 0 –55–40 –20

Ambient temperature °C

0 20 40 60 Ambient temperature °C

4) TTL Logic level range 5.5 5

3 2.4 2 ON OFF

1 0.5 0 –55–40 –20

0 20 40 60 Ambient temperature °C

Note) Please consult us for use that is outside this range.

(2) SPST type 1) Failsafe type

2) Latching type

4.5 12 24 V V V 6 16 32

5.25 14 28

4.5 12 24

4.5 12 24 3.75 10 20

3.75 10 20 Nominal voltage 3

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0 –55–40 –20

Nominal voltage

Allowable range for use

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0

Ambient temperature °C

0 0 –55–40 –20

Allowable range for use 0

Ambient temperature °C

0 20 40 60 Ambient temperature °C

RD (ARD) DIMENSIONS

mm inch

1. SPDT 1) Solder terminal

3.5 .138 3.5 .138 2.0 .079

4.3 .169

11.2 .441 3.5 .138

7.0 .276 0.3 .012

Solder terminal

NC COM NO Indicator Coil

GND +

39.0 1.535

Serial No.

4.5 .177

2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia.

7.2 .283

7.3 .287 2.1 .083 11.2 .441 22.4 .882 30.0 1.181 34.0 1.339

3-SMA connector

13.2 .520

Tolerance: ±0.3 ±.012

Failsafe

Latching 1 COM 2

NC COM NO

Latching with TTL driver (with self cut-off function) 1 COM 2 Indicator terminal Coil terminal

GND V GND

GND Logic 1 Logic 2

Coil 1 Coil 2

NC COM NO Indicator GND +

Serial No.

Coil

1 COM 2 GND 1

Serial No.

Indicator

1 COM 2

Coil

V GND 1

Serial No.

Indicator 2 Coil

RD (ARD) 2) Connector cable

mm inch

Pin No. Fail safe Latching Latching with TTL driver

1 – –

2 NC 1

–

Indicator 3 4 COM NO COM 2 COM

5 – –

6 – –

–

Coil 7 8 GND + GND 1 Logic GND 1

9 – 2 Logic 2

D-sub connector pin contact type

2345 Pin No. 1 6789 12.55 .494

3.05 dia. .120 dia. 25.0 .984 30.8 1.213

5.95 .234

1.2 .047

PVC wires 110.0±10 4.331±.394

NC COM NO GND +

39.0 1.535

Serial No.

4.5 .177

Indicator Coil

2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia.

7.2 .283

7.3 .287 2.1 .083

3-SMA connector

11.2 .441 22.4 .882 30.0 1.181 34.0 1.339

13.2 .520

RD (ARD) 2. Transfer

mm inch

45.70 1.799 15.24 .600

Max. 5.0 .197

0.30 .012

5.08 .200 5.08 .200 Solder terminal

5.08 .200 2.00 .079

3-3.80 dia. 3-.150 dia. 10.15 .400 9.65 39.0 .380 1.535

20.3 .799

9.65 .380 7.2 .283

4-SMA connector 32.0 1.260 16.2 .638 J1

32.0 1.260

16.2 .638

1 to 1.5 .039 to .059

Tolerance: ±0.3 ±.012

55.5 2.185

Fail safe Latching Latching with TTL driver

Failsafe

Coil terminal GND

Latching

Indicator terminal NC COM NO

Coil terminal GND 1 2

NC: J1-J2, J3-J4 NO: J1-J3, J2-J4 POS1: J1-J2, J3-J4 POS2: J1-J3, J2-J4 POS1: J1-J2, J3-J4 POS2: J1-J3, J2-J4

Latching with TTL driver (with self cut-off function)

Indicator terminal 1 COM 2

Coil terminal V GND Logic 1 Logic 2

Indicator terminal 1 COM 2

RD (ARD) 3. SPST Lead wire length 270±10 10.630±.394 Part No.

Fail safe type Lead wire

Lot No.

ARD00012 00000 JAPAN

Coil Lead wire 11.1 .437

12.5 .492

OFF

Non polarized relay (without diode)

Latching type 24.90 .980

Lead wire (Red)

Set

Reset

Set

0.4 .016

7.80 .307

Lead wire (Black) 1.60 .063 2.30 .091

2.30 .091

35 3. 2 C .13 C

19.05 .750 12.70 .500

Reset

0.4 .016 12.70 .500

7.925 .312

Tolerance: ±0.3 ±.012

2-2-56UNC-2B

• Measuring method (Impedance 50Ω) (V.S.W.R.) (Insertion loss) (Isolation)

• Measuring equipment

The contact must be ON. The contact must be ON. (without DUT board’s loss) The contact must be OFF. At that time, conduct measurement with an averaging of 64 times and 1% smoothing.

Network analyzer

B A R

HP 8510C RF OUT

PORT2

PORT1

B S parameter A test set R HP 8515A RF IN

3.5mm calibration kit (HP85052B)

Port1/Connector W

• Connector

Port2/Connector E

No. A2

3.3 .130

1.55 .061

ARD00012 00000 JAPAN 1

3.3 .130

A —A

Contents

Product name

Q 3.5 mm testport, Extention cable HP85131-60013 W

3.5 mm coaxial adaptor

HP83059

SMA adaptor

HP125.771.000

1.80 .071

• Input power test Sample: ARD01024, Quantity: n = 5 Frequency: 2.2 GHz, Ambient temperature: Room temperature Test circuit: Signal generator

RD coaxial switch SPST type Circulator Sensor

Amplifier Power meter Attenuator Termination

Sample No. 1 No. 2 No. 3 No. 4 No. 5

Cooling fan

100

110

120

Input power, W 130 140 150

160

170

180

190

200

Without

With

: No abnormality for high frequency and operating characteristics were observed after 30 min. power carrying.

(→; Test sequence)

RD (ARD) REFERENCE DATA 1-(1). High frequency characteristics (SPDT) Sample: ARD10012 Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

1.8

0.1

1.7

0.2

1.6 1.5 1.4 1.3

Isolation, dB

1.9

Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.3 0.4 0.5

30 40 50 60

0.6

1.2

0.7

1.1

0.8

1.0

0.9

1.0

100

1GHz 4GHz

8GHz 12.4GHz 18GHz Frequency

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1-(2). High frequency characteristics (Transfer) Sample: ARD60012 Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

0.1

1.7

0.2

1.6 1.5 1.4 1.3

Isolation, dB

1.9 1.8 Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.3 0.4 0.5

30 40 50

0.6

1.2

0.7

1.1

0.8

1.0

0.9

1.0

100

1GHz 4GHz 8GHz 12.4GHz 18GHz

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz

Frequency

26.5GHz

Frequency

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1-(3). High frequency characteristics (SPST) Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

1.8

0.2

1.6

1.4

1.2

1.0 45MHz

1GHz

2GHz Frequency

3GHz

Isolation, dB

2.0

Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.4

0.6

0.8

1.0 45MHz

1GHz

2GHz Frequency

3GHz

100 45MHz

1GHz

2GHz Frequency

3GHz

RD (ARD) NOTES 1. Coil connection When connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. (Only SPST failsafe type is non polarized relay) 2. Connection of coil indicator and washing conditions (SPDT, Transfer) 1) The connection of coil indicator terminal shall be done by soldering. Soldering conditions Max. 260°C 500°F (solder temp) within 10sec (soldering time) Max. 350°C 662°F (solder temp) within 3sec (soldering time) 2) This product is not sealed type, therefore washing is not allowed.

3. Other handling precautions. For SMA connectors, we recommend a torque of 0.90±0.1 N·m for installation, which falls within the prescribed torque of MIL-C-39012. Please be aware that conditions might be different depending on the connector materials and how it interacts with surrounding materials.