RF Relay Data Sheet by SYNsCON

1.0GHz 2 Form C RELAY

RA RELAYS (ARA)

FEATURES 1. High frequency characteristics (Impedance 50Ω, ~1.0GHz) • Insertion loss; Max. 0.3dB • Isolation; Min. 20dB (Between open contacts) Min. 30dB (Between contact sets) • V.S.W.R.; Max. 1.2 2. Surface mount terminal This relay is a surface-mounted model with excellent high-frequency properties. In addition, it can use a microstrip line in the base circuit design which spares the labor of machining the base.

9.7 .382

14.70 .579

5.9 .232

mm inch

3. Low profile small type 9.7(W)×14.7(L)×5.9(H) mm .382(W)×.579(L)×.232(H) inch 4. High sensitivity: 140 mW nominal operating power 5. High contact reliability Electrical life: Min. 107 (10mA 10V DC)

TYPICAL APPLICATIONS • Measurement instruments Oscilloscope attenuator circuit

SPECIFICATIONS Contact

Characteristics

Arrangement Contact material Initial contact resistance

2 Form C Gold-clad silver alloy Max. 75mΩ

Contact rating (resistive) Rating

Contact carrying power Max. switching voltage Max. switching current Isolation

High frequency characteristics (~1GHz, Insertion loss Impedance V.S.W.R. 50Ω)

Between open contacts Between contact sets

Input power

Single side stable Nominal operating power

1 coil latching 2 coil latching Mechanical (at 180 cpm)

Expected life (min. operation)

10mA 10 V DC (resistive load) Electrical (at 20 cpm) 1A 30 V DC (resistive load)

10mA 10 V DC 1A 30 V DC Max. 3W (at 1.0GHz, impedance 50Ω, V.S.W.R. max.1.2) 30 V DC 1A Min. 20dB Min. 30dB Max. 0.3dB Max. 1.2 Max. 3W (at 1.0GHz, impedance 50Ω, V.S.W.R. max.1.2) 140mW (1.5 to 12V) 200mW (24V) 300mW (48V) 70 mW (1.5 to 12V) 100mW (24V) 140mW (1.5 to 12V) 200mW (24V) 108 107 105

Initial insulation resistance *1 Between open contacts Between contact sets Initial breakdown Between contact and coil voltage *2 Between contact and earth terminal Operate time [Set time] *3 (at 20°C) Release time (without diode) [Reset time] *3 (at 20°C) Temperature rise (at 20°C) *4 Functional *5 Shock resistance Destructive *6 Functional *7 Vibration resistance Destructive Conditions for operation, transport and storage *8 Ambient temp (Not freezing and condensing at low Humidity temperature) Unit weight

Min. 100 MΩ (at 500 V DC) 750 Vrms for 1 min. 1,000 Vrms for 1 min. 1,000 Vrms for 1 min. 1,000 Vrms for 1 min. Max. 4ms (Approx. 2ms) [Max. 4ms (Approx. 2ms)] Max. 4ms (Approx. 1ms) [Max. 4ms (Approx. 2ms)] Max. 60°C Min. 500 m/s2 Min. 1,000 m/s2 10 to 55 Hz at double amplitude of 3mm 10 to 55 Hz at double amplitude of 5mm –40°C to +85°C –40°F to +185°F 5 to 85% R.H. Approx. 2g .07oz

Remarks * *1 *2 *3 *4 *5 *6 *7 *8

Specifications will vary with foreign standards certification ratings. Measurement at same location as “Initial breakdown voltage” section. Detection current: 10mA Nominal operating voltage applied to the coil, excluding contact bounce time. By resistive method, nominal voltage applied to the coil: 3W contact carrying power: at 1.0GHz, Impedance 50Ω, V.S.W.R. Max.1.2 Half-wave pulse of sine wave: 11ms, detection time: 10µs. Half-wave pulse of sine wave: 6ms Detection time: 10µs Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.

RA (ARA) ORDERING INFORMATION Ex.

Product name Contact arrangement Operating function Type of operation Terminal shape RA

2: 2 Form C

0: Single side stable 0: Standard 1: 1 coil latching type 2: 2 coil latching (B.B.M)

Coil voltage, V DC

Packing style

A: Surface-mount terminal

Nil: Tube packing 1H: 1.5 09: 9 03: 3 12: 12 X: Tape and reel packing (picked from 1/2/3 pin side) 4H: 4.5 24: 24 Z: Tape and reel packing 05: 5 48: 48 (picked from 8/9/10 pin side) 06: 6 Note: Packing style; Nil: Tube packing 40 pcs. in an inner package, 1,000 pcs. in an outer package Z: Tape and reel packing 500 pcs. in an inner package, 1,000 pcs. in an outer package

TYPES ANE COIL DATA (at 20°C 68°F) • Single side stable type Part No.

Nominal voltage, V DC

Pick-up voltage, V DC (max.) (initial)

Drop-out voltage, V DC (min.)(initial)

Coil resistance, Ω (±10%)

ARA200A1H(Z) ARA200A03(Z) ARA200A4H(Z) ARA200A05(Z) ARA200A06(Z) ARA200A09(Z) ARA200A12(Z) ARA200A24(Z) ARA200A48(Z)

1.5 3 4.5 5 6 9 12 24 48

1.125 2.25 3.375 3.75 4.5 6.75 9 18 36

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

16 64.3 145 178 257 579 1,028 2,880 7,680

Part No.

Nominal voltage, V DC

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (max.) (initial)

Coil resistance, Ω (±10%)

ARA210A1H(Z) ARA210A03(Z) ARA210A4H(Z) ARA210A05(Z) ARA210A06(Z) ARA210A09(Z) ARA210A12(Z) ARA210A24(Z)

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.375 3.75 4.5 6.75 9 18

32 128.6 289.3 357 514 1,157 2,057 5,760

Part No.

Nominal voltage, V DC

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (max.) (initial)

Coil resistance, Ω (±10%)

ARA220A1H(Z) ARA220A03(Z) ARA220A4H(Z) ARA220A05(Z) ARA220A06(Z) ARA220A09(Z) ARA220A12(Z) ARA220A24(Z)

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.375 3.75 4.5 6.75 9 18

16 64.3 145 178 257 579 1,028 2,880

Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3 6.3

Nominal operating power, mW

Max. allowable voltage, V DC

140 140 140 140 140 140 140 200 300

2.25 4.5 6.75 7.5 9 13.5 18 36 57.6

Nominal operating power, mW

Max. allowable voltage, V DC

70 70 70 70 70 70 70 100

2.25 4.5 6.75 7.5 9 13.5 18 36

Nominal operating power, mW

Max. allowable voltage, V DC

140 140 140 140 140 140 140 200

2.25 4.5 6.75 7.5 9 13.5 18 36

• 1 coil latching type Nominal operating current, mA (±10%) 46.9 23.3 15.6 14 11.7 7.8 5.8 4.2

• 2 coil latching type Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3

RA (ARA) DIMENSIONS

mm inch Suggested Mounting Pads (Top view) Single side stable A (S = 20:1) 1.0 .039 14.30 .563 12.90 .508

2.94 .116

0.50 .020

7.62 .300 11.5±0.5 .453±.020

8.90 9.56 .350 .376 12.50 .492 for glue pad 2.00 .079 12.40 .488 14.90 .587

5.90 .232

2.54 .100

2.54 .100 2.0 .079

0.3 .012

Coplanarity of terminals & ribs Max. 0.20 .008

9.70 .382

14.70 .579

Soldering with PC board earth (4 ribs)

14.0 .551

earth

1 coil latching

0.25 .010 1.0 .039

14.0 .551

2.94 .116

Tolerance: ±0.3 ±.012

2.54 .100 2.0 .079 8.90 9.56 .350 .376 12.50 .492

0.3 .012

Single side stable

Schematic (Top view) 1 coil latching

for glue pad 2.00 .079 12.40 .488 14.90 .587

2 coil latching

10 9 8 7 6

1 2 3 4 5

2 coil latching

Direction indication

(Deenergized condition)

(Reset condition)

earth

2.54 .100

(Reset condition)

14.0 .551

1.0 .039 2.0 .079 9.56 .376 2.94 8.90 12.50 .116 .350 .492

0.3 .012

for glue pad 2.00 .079 14.90 .587

earth

Tolerance: ±0.1 ±.004

REFERENCE DATA 1-(1). High frequency characteristics (Impedance 50Ω) Sample: ARA200A12 Measuring method: Measured with HP network analyzer (HP8753C).

• V.S.W.R.

• Insertion loss

1.5

1.4

0.2

• Isolation 0

COM-NO

1.3

1.2

0.3 0.4

20 Isolation, dB

Insertion loss, dB

V.S.W.R.

COM-NC COM-NC

30 40

0.6

0.8

COM-NO

CONTACT sets

COM-NC 1.1 COM-NO

1.0 300kHz

0.5GHz Frequency

1.0GHz

1.0 300kHz

0.5GHz Frequency

1.0GHz

100 300kHz

0.5GHz Frequency

1.0GHz

RA (ARA) 1-(2). High frequency characteristics (Impedance 75Ω) Sample: ARA200A12 Measuring method: Measured with HP network analyzer (HP8753C).

• V.S.W.R.

• Insertion loss

1.5

0.2

1.3 COM-NO 1.2

1.1

0.5GHz Frequency

1.0GHz

Isolation, dB

Insertion loss, dB

COM-NC V.S.W.R.

COM-NC

1.4

1.0 300kHz

• Isolation

0.4

30 40

0.6

0.8

1.0 300kHz

0.5GHz

1.0GHz

100 300kHz

Frequency

COM-NO

CONTACT sets

0.5GHz Frequency

1.0GHz

RD (ARD)

NEW

26.5GHz, 18GHz COAXIAL SWITCH

RD COAXIAL SWITCHES (ARD)

FEATURES

TYPICAL APPLICATIONS

1. Excellent high frequency characteristics (SPDT, transfer) up to 26.5 GHz. 2. SPDT, transfer and SPST type is available 3. High sensitivity Nominal operating power: 840 mW (SPDT, Failsafe type) 1540 mW (Transfer, Failsafe type) 4. Long life: 5 × 106 (SPDT, transfer) 5. Latching type is also available

Wireless and mobile communication • Cellular phone base stations • Ampli er s witching Digital broadcasting • Broadcasting equipment Measurement instruments • All types of inspection equipment

SPECIFICATIONS Contact Arrangement Contact material Initial contact resistance

Rating

Contact input power*1

Indicator rating

Contact rating Initial contact resistance (Measured by 5V 100mA)

High frequency characteristics (Impedance 50Ω)

Expected life (min. operation)

V.S.W.R. (max.) Insertion loss (dB, max.) Isolation (dB, min.) Mechanical (at 180 cpm)

SPDT

Transfer Gold plating Max. 100mΩ

SPST

120W 2.2GHz (V.S.W.R. 1.2 or less, no contact switching) 150W 2.2GHz (V.S.W.R. 1.2 or less, no contact switching when cooling fan is used) —

120W 3GHz (V.S.W.R. 1.15 or less, no contact switching, ambient temperature 40°C [SPDT], 25°C [Transfer])#1 Max. 30V 100mA

Max. 5V 100mA Max. 1Ω

—

to 1 GHz

1 to 4

4 to 8

8 to12.4

12.4 to 18

1.1

1.15

1.25 0.3 70

1.35 0.4 65

1.5 0.5 60

0.2 85

18 to 26.5#2 1.7 0.8 55

5 × 106 5 × 106 (5W, to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2)

Electrical (at 20 cpm)

—

See “REFERENCE DATA” 104 104 (80W, to 2.2GHz, impedance 50Ω, V.S.W.R.; max. 1.2, ambient temperature; max. 40°C 104°F)

#1 Factors such as heating of the connected connector in uence the high frequency char acteristics; therefore, please verify under actual conditions of use. #2 18 to 26.5 GHz characteristics apply to the 26.5 GHz type only.

Characteristics SPDT

Initial insulation resistance*2 Between open contacts Between contact and coil Initial breakdown voltage*3 Between contact and earth terminal Between coil and earth terminal Operate time*4 (at 20°C) Shock resistance Vibration resistance Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature)

Functional*5 Destructive*6 Functional*7 Destructive Ambient temp Humidity

Unit weight (Approx.)

Transfer SPST Min. 1,000 MΩ (at 500 V DC) 500 Vrms for 1 min. 500 Vrms for 1 min. 500 Vrms for 1 min. 500 Vrms for 1 min. Max. 15ms Max. 20ms Max. 15ms Min. 500 m/s2 {50G} Min. 200 m/s2 {20G} Min. 1,000 m/s2 {100G} 10 to 55 Hz at double amplitude of 3mm 10 to 55 Hz at double amplitude of 5mm –55°C to +85°C –67°F to +185°F 5 to 85% R.H. 50g 1.76oz 110g 3.88oz 20g .71oz

Remarks *1 Please verify the usability of input power under actual conditions because heat generated from connectors can in uence connection. *2 Measurement at same location as “Initial breakdown voltage” section. *3 Detection current: 10mA *4 Nominal operating voltage applied to the coil, excluding contact bounce time.

*5 Half-wave pulse of sine wave: 11ms, detection time: 10µs. *6 Half-wave pulse of sine wave: 11ms *7 Detection time: 10µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

RD (ARD) ORDERING INFORMATION Ex.

Product name RD

Nominal operating voltage, V DC 0: to 3GHz (SPST) 00: Failsafe 4H: 4.5V (Failsafe, 1: to 18GHz (SPDT) 10: Latching (SPST) Latching type only) 2: to 18GHz (Transfer) 20: Latching (SPDT, Transfer) 05: 5V (Latching with 5: to 26.5GHz (SPDT) 51: Latching with TTL driver TTL driver type only) 6: to 26.5GHz (Transfer) (with self cut-off function) 12: 12V (SPDT, Transfer) 24: 24V Frequency

Operating function

HF data attached (SPDT, Transfer) Nil: Solder terminal Nil: No HF test data (SPDT, Transfer), attached Lead wire (SPST) Q: HF test data attached C: Connector cable (SPDT type only) Operation terminal

Note: Sealed types are also available. (SPDT type only)

TYPES 1. SPDT 1) Solder terminal Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

18GHz type No HF datasheet HF datasheet attached attached ARD1004H ARD1004HQ ARD10012 ARD10012Q ARD10024 ARD10024Q ARD1204H ARD1204HQ ARD12012 ARD12012Q ARD12024 ARD12024Q ARD15105 ARD15105Q ARD15112 ARD15112Q ARD15124 ARD15124Q

26.5GHz type No HF datasheet HF datasheet attached attached ARD5004H ARD5004HQ ARD50012 ARD50012Q ARD50024 ARD50024Q ARD5204H ARD5204HQ ARD52012 ARD52012Q ARD52024 ARD52024Q ARD55105 ARD55105Q ARD55112 ARD55112Q ARD55124 ARD55124Q

18GHz type No HF datasheet HF datasheet attached attached ARD1004HC ARD1004HCQ ARD10012C ARD10012CQ ARD10024C ARD10024CQ ARD1204HC ARD1204HCQ ARD12012C ARD12012CQ ARD12024C ARD12024CQ ARD15105C ARD15105CQ ARD15112C ARD15112CQ ARD15124C ARD15124CQ

26.5GHz type No HF datasheet HF datasheet attached attached ARD5004HC ARD5004HCQ ARD50012C ARD50012CQ ARD50024C ARD50024CQ ARD5204HC ARD5204HCQ ARD52012C ARD52012CQ ARD52024C ARD52024CQ ARD55105C ARD55105CQ ARD55112C ARD55112CQ ARD55124C ARD55124CQ

18GHz type No HF datasheet HF datasheet attached attached ARD2004H ARD2004HQ ARD20012 ARD20012Q ARD20024 ARD20024Q ARD2204H ARD2204HQ ARD22012 ARD22012Q ARD22024 ARD22024Q ARD25105 ARD25105Q ARD25112 ARD25112Q ARD25124 ARD25124Q

26.5GHz type No HF datasheet HF datasheet attached attached ARD6004H ARD6004HQ ARD60012 ARD60012Q ARD60024 ARD60024Q ARD6204H ARD6204HQ ARD62012 ARD62012Q ARD62024 ARD62024Q ARD65105 ARD65105Q ARD65112 ARD65112Q ARD65124 ARD65124Q

Note: Standard packing; Carton: 1 pc. Case: 20 pcs.

2) Connector cable Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

Note: Standard packing; Carton: 1 pc. Case: 10 pcs.

2. Transfer 1) Solder terminal Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

RD (ARD) 3. SPST Operating function

Failsafe

Latching

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24

Part No. ARD0004H ARD00012 ARD00024 ARD0104H ARD01012 ARD01024

Note: Standard packing; Carton: 1 pc. Case: 20 pcs.

COIL DATA (at 20°C 68°F) 1. SPDT 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 186.7 70.0 40.4

Nominal power consumption, mW 840 840 970

2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 155.6 62.5 37.5

Nominal power consumption, mW 700 750 900

3) Latching with TTL driver type (with self cut-off function) Nominal operating voltage, V DC 5 12 24

TTL logic level (see TTL logic level range) ON OFF 2.4 to 5.5V

0 to 0.5V

Switching frequency Max. 180 cpm (ON time : OFF time = 1 : 1)

2. Transfer 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 342.2 128.3 69.6

Nominal power consumption, mW 1540 1540 1670

2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 266.7 104.2 58.3

Nominal power consumption, mW 1200 1250 1400

3) Latching with TTL driver type (with self cut-off function) Nominal operating voltage, V DC 5 12 24

TTL logic level (see TTL logic level range) ON OFF 2.4 to 5.5V

0 to 0.5V

Switching frequency Max. 180 cpm (ON time : OFF time = 1 : 1)

3. SPST 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 400 150 75

Nominal power consumption, mW

1800

RD (ARD) 2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 400 150 75

• Operating voltage range (1) SPDT, Transfer type 1) Failsafe type

2) Latching type

Nominal power consumption, mW

1800

3) Latching with TTL driver type (with self cut-off function)

4.5 12 24 V V V 6 16 32

5 12 24 V V V 6.67 16 32

5.25 14 28

5.83 14 28

4.5 12 24

5 12 24

3.75 10 20

4.17 10 20

Nominal voltage 3

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0 –55–40 –20

Allowable range for use Recommended operation voltage range Recommended release voltage range

8 16

3.33

8 16

2.25

6 12

2.5

6 12

1.5

4 8

Allowable range for use

1.67

Allowable range for use

0.75

2 4

Recommended set/reset voltage range

0.83

Recommended set/reset voltage range

0 –55–40 –20

0 0

Nominal voltage

Nominal voltage 3

0 0 –55–40 –20

Ambient temperature °C

0 20 40 60 Ambient temperature °C

4) TTL Logic level range 5.5 5

3 2.4 2 ON OFF

1 0.5 0 –55–40 –20

0 20 40 60 Ambient temperature °C

Note) Please consult us for use that is outside this range.

(2) SPST type 1) Failsafe type

2) Latching type

4.5 12 24 V V V 6 16 32

5.25 14 28

4.5 12 24

4.5 12 24 3.75 10 20

3.75 10 20 Nominal voltage 3

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0 –55–40 –20

Nominal voltage

Allowable range for use

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0

Ambient temperature °C

0 0 –55–40 –20

Allowable range for use 0

Ambient temperature °C

0 20 40 60 Ambient temperature °C

RD (ARD) DIMENSIONS

mm inch

1. SPDT 1) Solder terminal

3.5 .138 3.5 .138 2.0 .079

4.3 .169

11.2 .441 3.5 .138

7.0 .276 0.3 .012

Solder terminal

NC COM NO Indicator Coil

GND +

39.0 1.535

Serial No.

4.5 .177

2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia.

7.2 .283

7.3 .287 2.1 .083 11.2 .441 22.4 .882 30.0 1.181 34.0 1.339

3-SMA connector

13.2 .520

Tolerance: ±0.3 ±.012

Failsafe

Latching 1 COM 2

NC COM NO

Latching with TTL driver (with self cut-off function) 1 COM 2 Indicator terminal Coil terminal

GND V GND

GND Logic 1 Logic 2

Coil 1 Coil 2

NC COM NO Indicator GND +

Serial No.

Coil

1 COM 2 GND 1

Serial No.

Indicator

1 COM 2

Coil

V GND 1

Serial No.

Indicator 2 Coil

RD (ARD) 2) Connector cable

mm inch

Pin No. Fail safe Latching Latching with TTL driver

1 – –

2 NC 1

–

Indicator 3 4 COM NO COM 2 COM

5 – –

6 – –

–

Coil 7 8 GND + GND 1 Logic GND 1

9 – 2 Logic 2

D-sub connector pin contact type

2345 Pin No. 1 6789 12.55 .494

3.05 dia. .120 dia. 25.0 .984 30.8 1.213

5.95 .234

1.2 .047

PVC wires 110.0±10 4.331±.394

NC COM NO GND +

39.0 1.535

Serial No.

4.5 .177

Indicator Coil

2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia.

7.2 .283

7.3 .287 2.1 .083

3-SMA connector

11.2 .441 22.4 .882 30.0 1.181 34.0 1.339

13.2 .520

RD (ARD) 2. Transfer

mm inch

45.70 1.799 15.24 .600

Max. 5.0 .197

0.30 .012

5.08 .200 5.08 .200 Solder terminal

5.08 .200 2.00 .079

3-3.80 dia. 3-.150 dia. 10.15 .400 9.65 39.0 .380 1.535

20.3 .799

9.65 .380 7.2 .283

4-SMA connector 32.0 1.260 16.2 .638 J1

32.0 1.260

16.2 .638

1 to 1.5 .039 to .059

Tolerance: ±0.3 ±.012

55.5 2.185

Fail safe Latching Latching with TTL driver

Failsafe

Coil terminal GND

Latching

Indicator terminal NC COM NO

Coil terminal GND 1 2

NC: J1-J2, J3-J4 NO: J1-J3, J2-J4 POS1: J1-J2, J3-J4 POS2: J1-J3, J2-J4 POS1: J1-J2, J3-J4 POS2: J1-J3, J2-J4

Latching with TTL driver (with self cut-off function)

Indicator terminal 1 COM 2

Coil terminal V GND Logic 1 Logic 2

Indicator terminal 1 COM 2

RD (ARD) 3. SPST Lead wire length 270±10 10.630±.394 Part No.

Fail safe type Lead wire

Lot No.

ARD00012 00000 JAPAN

Coil Lead wire 11.1 .437

12.5 .492

OFF

Non polarized relay (without diode)

Latching type 24.90 .980

Lead wire (Red)

Set

Reset

Set

0.4 .016

7.80 .307

Lead wire (Black) 1.60 .063 2.30 .091

2.30 .091

35 3. 2 C .13 C

19.05 .750 12.70 .500

Reset

0.4 .016 12.70 .500

7.925 .312

Tolerance: ±0.3 ±.012

2-2-56UNC-2B

• Measuring method (Impedance 50Ω) (V.S.W.R.) (Insertion loss) (Isolation)

• Measuring equipment

The contact must be ON. The contact must be ON. (without DUT board’s loss) The contact must be OFF. At that time, conduct measurement with an averaging of 64 times and 1% smoothing.

Network analyzer

B A R

HP 8510C RF OUT

PORT2

PORT1

B S parameter A test set R HP 8515A RF IN

3.5mm calibration kit (HP85052B)

Port1/Connector W

• Connector

Port2/Connector E

No. A2

3.3 .130

1.55 .061

ARD00012 00000 JAPAN 1

3.3 .130

A —A

Contents

Product name

Q 3.5 mm testport, Extention cable HP85131-60013 W

3.5 mm coaxial adaptor

HP83059

SMA adaptor

HP125.771.000

1.80 .071

• Input power test Sample: ARD01024, Quantity: n = 5 Frequency: 2.2 GHz, Ambient temperature: Room temperature Test circuit: Signal generator

RD coaxial switch SPST type Circulator Sensor

Amplifier Power meter Attenuator Termination

Sample No. 1 No. 2 No. 3 No. 4 No. 5

Cooling fan

100

110

120

Input power, W 130 140 150

160

170

180

190

200

Without

With

: No abnormality for high frequency and operating characteristics were observed after 30 min. power carrying.

(→; Test sequence)

RD (ARD) REFERENCE DATA 1-(1). High frequency characteristics (SPDT) Sample: ARD10012 Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

1.8

0.1

1.7

0.2

1.6 1.5 1.4 1.3

Isolation, dB

1.9

Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.3 0.4 0.5

30 40 50 60

0.6

1.2

0.7

1.1

0.8

1.0

0.9

1.0

100

1GHz 4GHz

8GHz 12.4GHz 18GHz Frequency

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1-(2). High frequency characteristics (Transfer) Sample: ARD60012 Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

0.1

1.7

0.2

1.6 1.5 1.4 1.3

Isolation, dB

1.9 1.8 Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.3 0.4 0.5

30 40 50

0.6

1.2

0.7

1.1

0.8

1.0

0.9

1.0

100

1GHz 4GHz 8GHz 12.4GHz 18GHz

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz

Frequency

26.5GHz

Frequency

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1-(3). High frequency characteristics (SPST) Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

1.8

0.2

1.6

1.4

1.2

1.0 45MHz

1GHz

2GHz Frequency

3GHz

Isolation, dB

2.0

Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.4

0.6

0.8

1.0 45MHz

1GHz

2GHz Frequency

3GHz

100 45MHz

1GHz

2GHz Frequency

3GHz

RD (ARD) NOTES 1. Coil connection When connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. (Only SPST failsafe type is non polarized relay) 2. Connection of coil indicator and washing conditions (SPDT, Transfer) 1) The connection of coil indicator terminal shall be done by soldering. Soldering conditions Max. 260°C 500°F (solder temp) within 10sec (soldering time) Max. 350°C 662°F (solder temp) within 3sec (soldering time) 2) This product is not sealed type, therefore washing is not allowed.

3. Other handling precautions. For SMA connectors, we recommend a torque of 0.90±0.1 N·m for installation, which falls within the prescribed torque of MIL-C-39012. Please be aware that conditions might be different depending on the connector materials and how it interacts with surrounding materials.

RE (ARE)

RE RELAYS (ARE)

2.6 GHz SMALL MICROWAVE RELAYS

FEATURES 20.2 .795

11.2 .441

• Excellent high frequency characteristics (to 2.6GHz)

8.9 .350

20.2 .795

Type 11.2 .441 9.6 .378

mm inch

Impedance 50Ω

Impedance 75Ω

Frequency V.S.W.R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.) V.S.W.R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.)

900MHz

2.6GHz

1.3

1.7

0.2

0.7

1.2

1.5

0.2

0.5

• Compact and slim size Size: 20.2(L) × 11.2(W) × 8.9(H)* mm .795(L) × .441(W) × .350(H) inch *Surface-mount terminal is 9.6 mm .378 inch size.

TYPICAL APPLICATIONS 1. Broadcasting and video markets. • Digital broadcasting market • STB/tuner market, etc. 2. Communications market • Antennae switching • All types of wireless devices

• Surface-mount type also available

SPECIFICATIONS Contact

Coil (at 20°C, 68°F)

Arrangement Contact material Initial contact resistance

Contact rating

Rating Contact carrying power Max. switching voltage Max. switching current V.S.W.R.

High frequency characteristics Insertion loss (Impedance 75Ω) Isolation V.S.W.R. High frequency characteristics Insertion loss (Impedance 50Ω) Isolation

Expected life (min. operations)

Mechanical (at 180 cpm) 1W, 2.6GHz, [Impedance 75Ω, V.S.W.R. & 1.5] Electri- [Impedance 50Ω, V.S.W.R. & 1.7] cal 10mA 24V DC (resistive load) (at 20cpm)

1 Form C Gold Max. 100mΩ 1W (at 2.6 GHz [Impedance 75 Ω, V.S.W.R. Max.1.5] [Impedance 50 Ω, V.S.W.R. Max.1.7]) 10mA 24V DC (resistive load) 10W (at 2.6GHz [Impedance 75 Ω, V.S.W.R. Max.1.5] [Impedance 50 Ω, V.S.W.R. Max.1.7]) 30 V DC 0.5 A DC Max. 1.2 (to 900MHz) Max. 1.5 (to 2.6GHz) Max. 0.2dB (to 900MHz) Max. 0.5dB (to 2.6GHz) Min. 60dB (to 900MHz) Min. 30dB (to 2.6GHz) Max. 1.3 (to 900MHz) Max. 1.7 (to 2.6GHz) Max. 0.2dB (to 900MHz) Max. 0.7dB (to 2.6GHz) Min. 60dB (to 900MHz) Min. 30dB (to 2.6GHz) 106 3×105

Nominal operating power

200 mW

Characteristics Initial insulation resistance*1 Between open contacts Initial Between contact and coil breakdown 2 Between contact and voltage* ground terminal Operate time*3 (at 20°C) Release time (without diode)*3 (at 20°C) Temperature rise (at 20°C)*4 Functional*5 Shock resistance Destructive*6 Vibration resistance

Functional*7 Destructive

Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight

Min. 100 MΩ (at 500 V DC) 500 Vrms 1,000 Vrms 500 Vrms Max. 10ms Max. 5ms Max. 60°C Min. 500 m/s2{50 G} Min. 1,000 m/s2{100 G} 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm

Ambient temp.

–40°C to 70°C –40°F to 158°F

Humidity

5 to 85% R.H.

Remarks

Approx. 5 g .18 oz

* Speci cations will v ary with foreign standards certi cation r atings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 Detection current: 10mA *3 Nominal operating voltage applied to the coil, excluding contact bounce time. *4 By resistive method, nominal voltage applied to the coil: Contact carrying power: 10W, at 2.6GHz, [Impedance 75Ω, V.S.W.R. & 1.5] [Impedance 50Ω, V.S.W.R. & 1.7] *5 Half-wave pulse of sine wave: 11ms, detection time: 10µs. *6 Half-wave pulse of sine wave: 6ms *7 Detection time: 10µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

3×105

RE (ARE) ORDERING INFORMATION Ex. ARE

Contact arrangement

Operating function

Terminal shape

1: 1 Form C

0: Single side stable type (Impedance 50Ω) 3: Single side stable type (Impedance 75Ω)

Nil: Standard PC board terminal A: Surface-mount terminal

Coil voltage (DC) 03: 4H: 06: 09: 12: 24:

3V 4.5 V 6V 9V 12 V 24 V

Packing style Nil: Carton packing (Standard PC board terminal only) Tube packing (Surface-mount terminal only) Z: Tape and reel packing (picked from 12/13/14 pin side)

Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X type tape and reel packing (picked from 8/9/10/11/12/13/14-pin side) is also available. Suffix “X” instead of “Z”.

TYPES AND COIL DATA (at 20°C 68°F) • Single side stable type (Impedance 50Ω) • Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package. • Packing of surface-mount terminal: 25 pcs. in an inner package (tube); 200 pcs. in an outer package. • Packing of surface-mount terminal: 400 pcs. in an inner package (tape and reel); 800 pcs. in an outer package. Standard PC board terminal ARE1003 ARE104H ARE1006 ARE1009 ARE1012 ARE1024

ARE10A03

Nominal voltage, V DC 3

Pick-up voltage, V DC (max.) (initial) 2.25

Drop-out voltage, V DC (min.)(initial) 0.3

ARE10A4H ARE10A06 ARE10A09 ARE10A12 ARE10A24

4.5 6 9 12 24

3.375 4.5 6.75 9 18

0.45 0.6 0.9 1.2 2.4

Surface-mount terminal

Nominal operating current, mA (±10%) 66.7

Nominal operating power, mW 200

Max. allowable voltage, V DC (at 60°C) 3.3

101 180 405 720 2,880

44.4 33.3 22.2 16.7 8.3

200 200 200 200 200

4.95 6.6 9.9 13.2 26.4

Coil resistance, Ω (±10%)

• Single side stable type (Impedance 75Ω) • Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package. • Packing of surface-mount terminal: 25 pcs. in an inner package (tube); 200 pcs. in an outer package. • Packing of surface-mount terminal: 400 pcs. in an inner package (tape and reel); 800 pcs. in an outer package. Standard PC board terminal

Surface-mount terminal

Nominal voltage, V DC

Pick-up voltage, V DC (max.) (initial)

Drop-out voltage, V DC (min.)(initial)

Coil resistance, Ω (±10%)

ARE1303 ARE134H ARE1306 ARE1309 ARE1312 ARE1324

ARE13A03 ARE13A4H ARE13A06 ARE13A09 ARE13A12 ARE13A24

3 4.5 6 9 12 24

2.25 3.375 4.5 6.75 9 18

0.3 0.45 0.6 0.9 1.2 2.4

45 101 180 405 720 2,880

Nominal operating current, mA (±10%) 66.7 44.4 33.3 22.2 16.7 8.3

Nominal operating power, mW 200 200 200 200 200 200

Max. allowable voltage, V DC (at 60°C) 3.3 4.95 6.6 9.9 13.2 26.4 mm inch

DIMENSIONS 1. Standard PC board terminal (75Ω, 50Ω type) Schematic (Bottom view)

20.2 .795

Stand off

11.2 .441

14 13 12 11 10 9 8

Direction indication

COM

(Deenergized condition) 8.6 .339 0.3 .012

3.0 .118 2.54 .100

0.5 .020

0.3 .012 (1.49) (.059)

7.62 .300

0.3 .012 (2.09) (.082)

General tolerance: ±0.3 ±.012

RE (ARE) mm inch

2. Surface mount terminal • 75Ω type Schematic (Top view)

20.2 .795

(0.7) (.028)

NC 13.2 ±0.5 .520 ±.020

COM

14 13 12 11 10 9 8

11.2 .441

Direction indication (1.3) (.511)

(Deenergized condition) 0.3 .012

8.6 .339 0.3 .012

2.54 .100

(1.49) (.059)

0.5 .020

0.3 .012

7.62 .300

9.6 .378

(2.09) (.082)

General tolerance: ±0.3 ±.012

• 50Ω type

0.5 .020 4.12 .162 1.04 .041 (0.7) (.028)

Schematic (Top view)

20.2 .795 14.74 .580 3.5 .138 1.04 .041

0.5 .020

1.04 .041

0.5 .020 4.12 .162 1.04 .041

COM

14 13 12 11 10 9 8

Direction indication

(Deenergized condition)

13.2 ±0.5 11.2 .520 ±.020 .441

(1.3) (.511) 8.6 .339

0.3 .012

(1.49) (.059)

0.3 .012

7.62 .300

9.6 .378

(2.09) (.082)

General tolerance: ±0.3 ±.012

REFERENCE DATA 1-(1). High frequency characteristics (75Ω type) (Standard PC board terminal) • Insertion loss characteristics

• Isolation characteristics

2.0

1.9

0.1

1.8

0.2

1.6 1.5

COM-NO

1.4 1.3

0.3 0.4 0.5 0.6 COM-NO

0.8

1.1

COM-NC 3GHz

900MHz Frequency

COM-NC

30 40 50 60

0.7

1.2 1

COM-NC Isolation, dB

1.7

Insertion loss, dB

V.S.W.R.

• V.S.W.R. characteristics

0.9

1.0

100

3GHz

900MHz

COM-NO

Frequency

900MHz

3GHz Frequency

V.S.W.R.

RE (ARE)

NOTES

SMD RELAYS WITH 8GHz CAPABILITIES

FEATURES 9.00 .354

14.0 .551

• Excellent high frequency characteristics (50Ω, at 5GHz) V.S.W.R.: Max. 1.25 Insertion loss: Max. 0.5dB Isolation: Min. 35dB (Between open contacts) Min. 30dB (Between contact sets) • Surface mount terminal Surface mount terminals are now standard so there is much less work in designing PC boards. • Small size Size: 14.00 (L)×9.00 (W)×8.20 (H) mm .551 (L)×.354 (W)×.323 (H) inch

8.20 .323

14.0 .551

9.00 .354 8.20 .323

RJ RELAYS (ARJ) TYPICAL APPLICATIONS Measurement equipment market Attenuator circuits, spectrum analyzer, oscilloscope, mobile equipment, tester Mobile telecommunication market IMT2000, microwave communication Medical instruments market

SPECIFICATIONS Characteristics

Contact Arrangement Contact material Initial contact resistance

2 Form C Gold alloy Max. 150mΩ

Contact rating Rating

Contact carrying power

High frequency characteristics (Initial) (~5GHz, Impedance 50Ω)

Max. switching voltage Max. switching current V.S.W.R. Insertion loss (without D.U.T. board’s loss) Between open contacts Isolation Between contact sets Input power Mechanical (at 180 cpm)

Expected life (min. operations)

1W, at 5GHz, Electrical V.S.W.R. & 1.25 (at 10mA 10V DC 20cpm) (resistive load)

1W (at 5 GHz, Impedance 50 Ω, V.S.W.R. &1.25) 10mA 10V DC (resistive load) 1W (at 5 GHz, Impedance 50 Ω, V.S.W.R. &1.25) 30 V DC 0.3 A DC Max. 1.25 Max. 0.5dB Min. 35dB Min. 30dB

1W (at 5GHz, impedance 50 Ω, V.S.W.R. &1.25, at 20°C) 107 106 106

Coil (at 20°C, 68°F) Single side stable 2 coil latching

Nominal operating power 200 mW 150 mW

Initial insulation resistance*1 Between open contacts Between contact sets Initial Between contact and coil breakdown Between coil and earth terminal voltage*2 Between contact and earth terminal Operate time [Set time]*3 (at 20°C) Release time (without diode)[Reset time]*3 (at 20°C) Temperature rise (at 20°C)*4 Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, Ambient temp. transport and storage*8 (Not freezing and condensing Humidity at low temperature) Unit weight

Min. 500 MΩ (at 500 V DC) 500 Vrms 500 Vrms 500 Vrms 500 Vrms 500 Vrms Max. 5ms Max. 5ms Max. 50°C Min. 500 m/s2 Min. 1,000 m/s2 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm –30°C to 70°C –22°F to 158°F 5 to 85% R.H. Approx. 3 g .11 oz

Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 Detection current: 10mA *3 Nominal operating voltage applied to the coil, excluding contact bounce time. *4 By resistive method, nominal voltage applied to the coil, 5GHz, V.S.W.R. & 1.25 *5 Half-wave pulse of sine wave: 6ms, detection time: 10µs. *6 Pulse of sine wave: 11ms. *7 Detection time: 10µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.

RJ (ARJ) ORDERING INFORMATION Ex. ARJ Contact arrangement Operating function 2: 2 Form C

2 Terminal shape

0: Single side stable Nil: Standard PC board terminal 2: 2 coil latching A: Surface-mount terminal

Coil voltage (DC)

Packing style

03 : 3V 4H: 4.5V 12 : 12V 24 : 24V

Nil: Carton packing X: Tape end reel packing (picked from 1/2/3-pin side) Z: Tape and reel packing (picked from 6/7/8-pin side) Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3-pin side) is also available. Suffix “X” instead of “Z”.

TYPES AND COIL DATA (at 20°C 68°F) 1. Standard PC board terminal • Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package Operating function

Coil Rating, V DC

Single side stable

3 4.5 12 24

Operating function

Coil Rating, V DC

2 coil latching

3 4.5 12 24

Part No. Pick-up voltage, Drop-out voltage, Nominal operating Coil resistance, V DC (max.) V DC (min.) current, mA Standard PC Ω (±10%) (initial) (initial) (±10%) board terminal ARJ2003 2.25 0.3 66.6 45 ARJ204H 3.375 0.45 44.4 101.2 ARJ2012 9 1.2 16.6 720 ARJ2024 18 2.4 8.3 2,880

Part No. Standard PC board terminal ARJ2203 ARJ224H ARJ2212 ARJ2224

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (min.) (initial)

2.25 3.375 9 18

Nominal operating Coil resistance, current, mA Ω (±10%) (±10%) 50 33.3 12.5 6.3

60 135 960 3,840

Nominal operating power, mW

Max. allowable voltage, V DC

200 200 200 200

3.3 4.95 13.2 26.4

Nominal operating power, mW

Max. allowable voltage, V DC

150 150 150 150

3.3 4.95 13.2 26.4

2. Surface-mount terminal • Packing of surface-mount terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package • Packing of surface-mount terminal: 500 pcs. in an inner package (tape and reel); 500 pcs. in an outer package Operating function

Coil Rating, V DC

Single side stable

3 4.5 12 24

Operating function

Coil Rating, V DC

2 coil latching

3 4.5 12 24

Part No. Pick-up Drop-out Nominal operating Coil Nominal Max. allowable current, mA resistance, operating Carton Tape and reel voltage, V DC voltage, V DC voltage, V DC (max.) (initial) (min.) (initial) (±10%) Ω (±10%) power, mW packing packing ARJ20A03 ARJ20A03Z 2.25 0.3 66.6 45 200 3.3 ARJ20A4H ARJ20A4HZ 3.375 0.45 44.4 101.2 200 4.95 ARJ20A12 ARJ20A12Z 9 1.2 16.6 720 200 13.2 ARJ20A24 ARJ20A24Z 18 2.4 8.3 2,880 200 26.4

Part No. Set voltage, Reset voltage, Nominal operating Coil Nominal Max. allowable current, mA resistance, operating Carton Tape and reel V DC (max.) V DC (min.) voltage, V DC (initial) (initial) ( ± 10%) Ω ( ± 10%) power, mW packing packing ARJ22A03 ARJ22A03Z 2.25 2.25 50 60 150 3.3 ARJ22A4H ARJ22A4HZ 3.375 3.375 33.3 135 150 4.95 ARJ22A12 ARJ22A12Z 9 9 12.5 960 150 13.2 ARJ22A24 ARJ22A24Z 18 18 6.3 3,840 150 26.4

RJ (ARJ) REFERENCE DATA 1. High frequency characteristics Sample: ARJ20A12 Measuring method: Measured with MEW PC board by HP network analyzer (HP8510C). • V.S.W.R. characteristics • Insertion loss characteristics (without D.U.T. board’s loss) 2.0

• Isolation characteristics 0

1.9 Insertion loss, dB

1.7 1.6 1.5 1.4

Isolation, dB

0.5

1.8 V.S.W.R.

1.0 1.5

Between contact sets 30 40 50

2.0

1.3

1.2

Between open contact

2.5

1.1 1.0

45MHz

5GHz Frequency

3.0

8GHz

45MHz

5GHz Frequency

80 45MHz

8GHz

5GHz Frequency

DIMENSIONS

8GHz

mm inch

1. Standard PC board terminal

Schematic (Bottom view) Expansion of A 10.6 .417

Single side stable Direction indication + 1

10.4 .409

0 to 0.2 0 to .008 12.2 .480

24 ribs should be soldered with PC board ground. 9.00 .354

14.0 .551

0.50 .020

8.89 .350 12.70 .500 11.40 .449

4 NO 5 8

10 NC 9

4 NO 5 + 8

7 6 Com

(Deenergized condition)

Com 2 3 –

7 6 – Com

(Reset condition)

3Better HF characteristics may be obtained when this 8.20 portion is soldered with .323 PC board ground.

3.50 .138

+ 1

Com 2 3 –

10 NC 9

(Typical: 0.1) (Typical: .004)

2 coil latching

0.50 .020

0.40 .016

0.20 .008 0.50 .020

6.36 .250

7.62 .300

3.81 .150

1All bottom surface of the base should be touched closely or soldered with PC board ground. 0.20 .008

0.15 .006

General tolerance: ±0.3 ±.012

2. Surface mount terminal Schematic (Top view) 0.50 .020

10.4 .409 0.50 .020 0.40 .016

Expansion of A

10.6 .417

Direction indication 8

3.81 .150

8.89 .350 12.2 .480

0 to 0.2 0 to .008

24 ribs should be soldered with PC board ground.

15.0 .591

2 coil latching

Com 7 6

+ 8

NC 10

NO + 1

2 3 – Com

(Deenergized condition) 3Better HF characteristics 8.20 may be obtained when this .323 portion is soldered with PC board ground.

0.20 .008

6.36 .250

(Typical: 0.1) (Typical: .004)

9.00 .354

14.0 .551

11.40 .449

Single side stable

10.0 .394

0.50 .020 1All bottom surface of the base should be touched closely or soldered with PC board ground.

Com 7 6 –

NC 10

NO + 1

2 3 – Com

(Reset condition)

RJ (ARJ) NOTES 2. Measuring method (Impedance 50Ω)

7.40 .291 1.50 .059

8510C

(10.75) (.423)

14.40 .570

RF OUT

1.33 .052 2.57 .101

RF IN

3.81 .150

PORT1

Product name

HP 85131-60013

HP 83059

21±0.8 dia. .827±.031 dia.

2.0±0.5 .079±.020 100±1 dia. 3.937±.039 dia. 370±2 dia. 14.567±.079 dia.

2.0±0.2 .079±.008

a. di ia. 70 8 d . 0 2 6- -.0 6

Measuring board 1) Dimensions <Surface mount terminal>

0.40 .016 0.40 .016

7.22 .284

7.07 .278 2.81 .111 0.40 .016 8.89 .350 12.04 .474 8.35 .329

0.40 .016 0.40 .016

6.72 .265

20.00 6.62 .787 .261

0.50 .020 8.89 .350 11.70 .461 30.00 1.181

0.50 .020

<Calibration board> 14.5 .571 10.0 .394 0.40 or 0.50 .016 or .020 1.76 or 1.86 .069 or .073

17.00 .669

0.80 .031

12.70 .500 17.00 .669 6-1.86 0.90 6-.073 .035

Contents 3.5 mm testport, Extension cable 3.5 mm coaxial adaptor

Notes) 1. All bottom surface of the base should be touched closely or soldered with PC board ground. 2. 4 ribs should be soldered with PC board ground.

6-1.76 6-.069

a. di ia. 60 d 0. 24 4 -.0 4 1.00 .039

7.62 .300

(Step 1) Calibrate the test system with HP calibration kit [HP85052B] (Step 2) After calibration, connect the D.U.T. board and measure. Connect 50 Ω terminals on connectors other than those for measurement.

2) Dimensions of plastic reel

13±0.2 dia. .512±.008 dia. 24.4 +2 0 .961 +.079 0

8515A

Connector No.

8.35 .329

. dia . .70 dia 6-1 .067 6-

6.20 .244 11.40 .449 9.40 ° o 5 .370

78 78 -0.4 -.0 0 16 dia dia . .

B S parameter A test set R

Network B analyzer A R

16.00 24.00 .630 .945

11.20 .441

PORT2

45°

11.50 .453

5°

1.75 .069

8.80 .346 0.40±0.05 8.50 .337 .016±.002 3 to

ia. a. .1 d i +0 0 0+.0004 d 1.5 59 .0

16.00 .630

4.00 .157 2.0 (Accumulation 10 pitch: .079 40±0.1 1.575±.004)

<Standard PC board terminal> . dia a. 60 di 1. 3 4- -.06 4

1. Tape and reel packing 1) Tape dimensions

0.40 .016

ole hh . oug dia Thr -0.40 dia. 86 -.016 86

2) Material: Glass PTFE double-sided through hole PC board R-4737 (Matsushita Electric Works) 3) Board thickness: t = 0.8 mm 4) Copper plating: 18µm • Connector (SMA type receptacle) Product name: R125 510 (RADIALL) Insertion loss compensation The insertion loss of relay itself is given by subtracting the insertion loss of shortcircuit the Com and the NC (or NO). (signal path and two connectors)

1.00 .039 20.00 .787 45°

30.00 1.181

1.5 GHz MICROWAVE RELAY

20.2 .795

RK RELAYS

• Excellent high frequency characteristics Isolation: Min. 60dB (at 1.5 GHz) Insertion loss: Max. 0.3dB (at 900 MHz) • V.S.W.R.: Max. 1.5 (at 900MHz) • High sensitivity in small size Size: 20.2 × 11.2 × 9.7 mm .795 × .441 × .382 inch Nominal power consumption: 200 mW (single side stable type) • Sealed construction for automatic cleaning • Latching types are also available

11.2 .441 9.7 .382

mm inch

SPECIFICATIONS Contact

Characteristics

Arrangement

1 Form C

Initial insulation resistance*1

Contact material

Gold-clad

Between open contacts Initial Between contact and coil breakdown 2 Between contact and voltage* earth terminal

Initial contact resistance, max. (By HP4328A)

Rating

10 W

Max. switching voltage

30 V DC

Max. switching current

0.5 A

Nominal switching capacity High frequency V.S.W.R. characteristics Insertion loss (Impedance 50Ω) Isolation Expected life (min. operations)

100 mΩ

Max. switching power

0.01 A 24 V DC 10 W (at 1.2 GHz, Impedance 50Ω) Max. 1.5 (at 900 MHz)

500 Vrms 1,000 Vrms 500 Vrms

Operate time [Set time]* (at nominal voltage) Release time (without diode) [Reset time]* (at nominal voltage) *2

Approx. 6 ms [Approx. 5ms]

Approx. 3 ms [Approx. 5ms] Max. 60°Cwith nominal coil voltage across coil and at nominal switching capacity

Temperature rise

Max. 0.3 dB (at 900 MHz) Min. 60 dB (at 1.5 GHz)

Functional*4

Shock resistance

0.01 A 24 V DC

3×105

Destructive*

Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm

Functional*6

Vibration resistance

105

10 W 1.2 GHz

Min. 196 m/s2 {20 G} 5

5×106

Mechanical Electrical

Min. 100 MΩ at 500 V DC

Destructive

Coil (at 25°C, 68°F) Nominal operating power Single side stable

200 mW

1 coil latching

200 mW

2 coil latching

400 mW

Conditions for operation, transport and storage

Ambient temp.

(Not freezing and condensing Humidity at low temperature)

–40°C to 70°C –40°F to 158°F 5 to 85% R.H. Approx. 4.4 g .155 oz

Unit weight Remarks

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms, detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs

TYPICAL APPLICATIONS • Audio visual equipment broadcast satellite tuners VCRs, CATVs, TVs • Communication equipment automobile telephones maritime telephones emergency and disaster prevention communications, PCM switches • Instrumentation test equipment measuring equipment

ORDERING INFORMATION Ex. RK

24V

Contact arrangement

Operating function

Coil voltage, DC

1: Standard type 1R: R type (See Schematic on next page.)

Nil: Single side stable L: 1 coil latching L2: 2 coil latching

3, 4.5, 5, 6, 9, 12, 24 V

RK TYPES AND COIL DATA (at 20°C 68°F) • Single side stable type Part No. RK1-3V RK1-4.5V RK1-5V RK1-6V RK1-9V RK1-12V RK1-24V

RK1R-3V RK1R-4.5V RK1R-5V RK1R-6V RK1R-9V RK1R-12V RK1R-24V

Nominal voltage, V DC

Pick-up voltage, max. V DC

Drop-out voltage, min. V DC

Coil resistance, Ω (±10%)

Nominal operating current, mA

Nominal operating power, mW

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

0.3 0.45 0.5 0.6 0.9 1.2 2.4

45 101 125 180 405 720 2,880

66.7 44.4 40.7 33.3 22.2 16.7 8.3

200 200 200 200 200 200 200

Nominal voltage, V DC

Set voltage, max. V DC

Reset voltage, max. V DC

Coil resistance, Ω (±10%)

Nominal operating current, mA

Nominal operating power, mW

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

45 101 125 180 405 720 2,880

66.7 44.4 40 33.3 22.2 16.7 8.3

200 200 200 200 200 200 200

Nominal voltage, V DC

Set voltage, max. V DC

Reset voltage, max. V DC

Coil resistance, Ω (±10%)

Nominal operating current, mA

Nominal operating power, mW

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

22.5 50.6 62.5 90 202.5 360 1,440

133.3 88.9 80 66.7 44.4 33.3 16.7

400 400 400 400 400 400 400

Maximum. allowable voltage, V DC (at 60°C 140°F) 3.3 4.95 5.5 6.6 9.9 13.2 26.4

• 1 coil latching type Part No. RK1-L-3V RK1-L-4.5V RK1-L-5V RK1-L-6V RK1-L-9V RK1-L-12V RK1-L-24V

RK1R-L-3V RK1R-L-4.5V RK1R-L-5V RK1R-L-6V RK1R-L-9V RK1R-L-12V RK1R-L-24V

Maximum. allowable voltage, V DC (at 60°C 140°F) 3.3 4.95 5.5 6.6 9.9 13.2 26.4

• 2 coil latching type Part No. RK1-L2-3V RK1-L2-4.5V RK1-L2-5V RK1-L2-6V RK1-L2-9V RK1-L2-12V RK1-L2-24V

RK1R-L2-3V RK1R-L2-4.5V RK1R-L2-5V RK1R-L2-6V RK1R-L2-9V RK1R-L2-12V RK1R-L2-24V

Maximum. allowable voltage, V DC (at 60°C 140°F) 3.3 4.95 5.5 6.6 9.9 13.2 26.4

RK DIMENSIONS

mm inch PC board pattern (Bottom view) 20.2 .795

11.2 .441

Single side stable and 1 coil latching

9.1 .358 0.6 .024 3.5 .138

2.54 .100

9-0.9 dia. 9-.035 dia. 2.54 2.54 .100 .100

7.62 .300 7.62 .300

Single side stable and 1 coil latching 2-0.6×0.3 2-.024×.012

2 coil latching 10-0.9 dia. 10-.035 dia. 2.54 2.54 .100 .100

Stand-off 3- 0.45 3- .018

4-0.6×0.25 4-.024×.010 7.62 .300

2 coil latching 3-0.6×0.3 3-.024×.012

Tolerance: ±0.1 ±.003

Stand-off 3- 0.45 3- .018

4-0.6×0.25 4-.024×.010

General tolerance: ±0.3 ±.012

Schematic (Bottom view)

14 13 12 11 10

1 coil latching +7

COM

(Deenergized condition)

2 coil latching

−7

14 13 12 11 10

RESET

COM

SET

(Reset condition)

Direction indication

−1

Direction indication

Single side stable

−

+ +

14 13 12 11 10

RESET

COM

(Reset condition)

REFERENCE DATA 1.-(1) High frequency characteristics (Impedance 75Ω) Sample: RK1-12V Measuring method: Measured with HP network analyzer (HP8753C)

• V.S.W.R. characteristics

• Insertion loss characteristics

2.0

• Isolation characteristics 0

0 COM-NO

1.6

1.4

COM-NO

1.2

0.2

0.4

Isolation, dB

Insertion loss, dB

V.S.W.R.

1.8

COM-NC

0.6

0.8

COM-NO

COM-NC

COM-NC 1.0

300kHz

1.5GHz Frequency

3GHz

1.0 300kHz

1.5GHz Frequency

3GHz

100 300kHz

1.5GHz Frequency

SET

3GHz

RK 1.-(2) High frequency characteristics (Impedance 50Ω) Sample: RK1-5V Measuring method: Measured with HP network analyzer (HP8753C)

• Insertion loss characteristics 0

0.2

2.0

Insertion loss, dB

1.8

V.S.W.R.

COM-NC 1.6 COM-NO 1.4

• Isolation characteristics

COM-NO 0.4

Isolation, dB

• V.S.W.R. characteristics

COM-NO

0.6

60 COM-NC

COM-NC 1.2

300kHz

1.5GHz Frequency

1.0 300kHz

3GHz

2. Coil temperature rise

1.5GHz Frequency

Operate/Reset time, ms

RK1-L2-12V

60 RK1-12V, RK1-L-12V 40

3GHz

Sample: RK1-L-12V, RK1-L2-12V No. of samples: n = 12

1.5GHz Frequency

3.-(2) Set/Reset time (Latching)

Sample: RK1-12V; No. of samples: n = 6

100

100 300kHz

3GHz

3.-(1) Operate/Release time (Single side stable)

Sample: RK1-12V, RK1-L-12V, RK1-L2-12V No. of samples: n = 6 Carrying current: 10 mA Ambient temperature: 25°C 77°F

Temperature rise, °C

Set/Reset time, ms

1.0

0.8

Operate time 6

Max. Min. Max.

Set time Reset time

Max. Max. Min. Min.

Min. Release time

100 130 150 Voltage applied to coil, %V

100 120 150 Voltage applied to coil, %V

100 130 Voltage applied to the coil (%V)

4.-(1) Mechanical life test (Single side stable)

4.-(2) Mechanical life test (Latching)

4.-(3) Mechanical life test

Sample: RK1-12V; No. of samples: n = 12

Sample: RK1-L2-12V No. of samples: n = 12

Sample: RK1-12V No. of samples: n = 20 (20 × 2 contacts)

Pick-up voltage 8

Max. Min.

6 Drop-out voltage Max. 2 0

Min.

100 500 1,000 No. of operations, ×104

10 8

Max. Min.

6 4

Contact resistance, mΩ

300

12 Set/Reset voltage, V

Pick-up/drop-out voltage, V

250 200 150 100

Max.

Min. 100 500 1,000 No. of operations, ×104

50 100 500 1,000 No. of operations, ×104

RK 5. Electrical life test (0.01 A 24 V DC)

6. Ambient temperature characteristics

7. Contact resistance distribution (initial)

Sample: RK1-12V; No. of samples: n = 6

Sample: RK1-12V No. of samples: n = 50 (50 × 2 contacts)

10 Pick-up voltage Max. Min.

8 6

–40 –20 –40 –4

Drop-out voltage Max. Min.

2 0

10 20 No. of operations, ×104

20 Drop-out voltage 20 40 60 80 68 104 140 176 –20 Ambient temperature, °C °F –40

0 –10

Rate of change, %

Sample: RK1-12V; No. of samples: n = 10

Rate of change, %

8.-(2) Influence of adjacent mounting

Sample: RK1-12V; No. of sample: n = 10

OFF OFF

OFF

0 OFF

–10

0 –10

ON condition

5 10 .197 .394 Inter-relay distance, (mm, inch)

OFF condition

Rate of change, %

ON ON

Drop-out voltage

Pick-up voltage

OFF condition

8.-(1) Influence of adjacent mounting

Pick-up voltage

40 Pick-up voltage Quantity

Rate of change, %

Pick-up/drop-out voltage, V

10 Drop-out voltage 0

–10

ON condition

5 10 .197 .394 Inter-relay distance, (mm, inch)

20 30 40 50 Contact resistance, mΩ

1.0GHz 2 Form C RELAY

RA RELAYS (ARA)

9.7 .382

14.70 .579

5.9 .232

mm inch

TYPICAL APPLICATIONS • Measurement instruments Oscilloscope attenuator circuit

SPECIFICATIONS Contact

Characteristics

Arrangement Contact material Initial contact resistance

2 Form C Gold-clad silver alloy Max. 75mΩ

Contact rating (resistive) Rating

Contact carrying power Max. switching voltage Max. switching current Isolation

High frequency characteristics (~1GHz, Insertion loss Impedance V.S.W.R. 50Ω)

Between open contacts Between contact sets

Input power

Single side stable Nominal operating power

1 coil latching 2 coil latching Mechanical (at 180 cpm)

Expected life (min. operation)

10mA 10 V DC (resistive load) Electrical (at 20 cpm) 1A 30 V DC (resistive load)

Remarks * *1 *2 *3 *4 *5 *6 *7 *8

RA (ARA) ORDERING INFORMATION Ex.

Product name Contact arrangement Operating function Type of operation Terminal shape RA

2: 2 Form C

0: Single side stable 0: Standard 1: 1 coil latching type 2: 2 coil latching (B.B.M)

Coil voltage, V DC

Packing style

A: Surface-mount terminal

TYPES ANE COIL DATA (at 20°C 68°F) • Single side stable type Part No.

Nominal voltage, V DC

Pick-up voltage, V DC (max.) (initial)

Drop-out voltage, V DC (min.)(initial)

Coil resistance, Ω (±10%)

ARA200A1H(Z) ARA200A03(Z) ARA200A4H(Z) ARA200A05(Z) ARA200A06(Z) ARA200A09(Z) ARA200A12(Z) ARA200A24(Z) ARA200A48(Z)

1.5 3 4.5 5 6 9 12 24 48

1.125 2.25 3.375 3.75 4.5 6.75 9 18 36

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8

16 64.3 145 178 257 579 1,028 2,880 7,680

Part No.

Nominal voltage, V DC

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (max.) (initial)

Coil resistance, Ω (±10%)

ARA210A1H(Z) ARA210A03(Z) ARA210A4H(Z) ARA210A05(Z) ARA210A06(Z) ARA210A09(Z) ARA210A12(Z) ARA210A24(Z)

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.375 3.75 4.5 6.75 9 18

32 128.6 289.3 357 514 1,157 2,057 5,760

Part No.

Nominal voltage, V DC

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (max.) (initial)

Coil resistance, Ω (±10%)

ARA220A1H(Z) ARA220A03(Z) ARA220A4H(Z) ARA220A05(Z) ARA220A06(Z) ARA220A09(Z) ARA220A12(Z) ARA220A24(Z)

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.375 3.75 4.5 6.75 9 18

16 64.3 145 178 257 579 1,028 2,880

Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3 6.3

Nominal operating power, mW

Max. allowable voltage, V DC

140 140 140 140 140 140 140 200 300

2.25 4.5 6.75 7.5 9 13.5 18 36 57.6

Nominal operating power, mW

Max. allowable voltage, V DC

70 70 70 70 70 70 70 100

2.25 4.5 6.75 7.5 9 13.5 18 36

Nominal operating power, mW

Max. allowable voltage, V DC

140 140 140 140 140 140 140 200

2.25 4.5 6.75 7.5 9 13.5 18 36

• 1 coil latching type Nominal operating current, mA (±10%) 46.9 23.3 15.6 14 11.7 7.8 5.8 4.2

• 2 coil latching type Nominal operating current, mA (±10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3

RA (ARA) DIMENSIONS

mm inch Suggested Mounting Pads (Top view) Single side stable A (S = 20:1) 1.0 .039 14.30 .563 12.90 .508

2.94 .116

0.50 .020

7.62 .300 11.5±0.5 .453±.020

8.90 9.56 .350 .376 12.50 .492 for glue pad 2.00 .079 12.40 .488 14.90 .587

5.90 .232

2.54 .100

2.54 .100 2.0 .079

0.3 .012

Coplanarity of terminals & ribs Max. 0.20 .008

9.70 .382

14.70 .579

Soldering with PC board earth (4 ribs)

14.0 .551

earth

1 coil latching

0.25 .010 1.0 .039

14.0 .551

2.94 .116

Tolerance: ±0.3 ±.012

2.54 .100 2.0 .079 8.90 9.56 .350 .376 12.50 .492

0.3 .012

Single side stable

Schematic (Top view) 1 coil latching

for glue pad 2.00 .079 12.40 .488 14.90 .587

2 coil latching

10 9 8 7 6

1 2 3 4 5

2 coil latching

Direction indication

(Deenergized condition)

(Reset condition)

earth

2.54 .100

(Reset condition)

14.0 .551

1.0 .039 2.0 .079 9.56 .376 2.94 8.90 12.50 .116 .350 .492

0.3 .012

for glue pad 2.00 .079 14.90 .587

earth

Tolerance: ±0.1 ±.004

REFERENCE DATA 1-(1). High frequency characteristics (Impedance 50Ω) Sample: ARA200A12 Measuring method: Measured with HP network analyzer (HP8753C).

• V.S.W.R.

• Insertion loss

1.5

1.4

0.2

• Isolation 0

COM-NO

1.3

1.2

0.3 0.4

20 Isolation, dB

Insertion loss, dB

V.S.W.R.

COM-NC COM-NC

30 40

0.6

0.8

COM-NO

CONTACT sets

COM-NC 1.1 COM-NO

1.0 300kHz

0.5GHz Frequency

1.0GHz

1.0 300kHz

0.5GHz Frequency

1.0GHz

100 300kHz

0.5GHz Frequency

1.0GHz

RA (ARA) 1-(2). High frequency characteristics (Impedance 75Ω) Sample: ARA200A12 Measuring method: Measured with HP network analyzer (HP8753C).

• V.S.W.R.

• Insertion loss

1.5

0.2

1.3 COM-NO 1.2

1.1

0.5GHz Frequency

1.0GHz

Isolation, dB

Insertion loss, dB

COM-NC V.S.W.R.

COM-NC

1.4

1.0 300kHz

• Isolation

0.4

30 40

0.6

0.8

1.0 300kHz

0.5GHz

1.0GHz

100 300kHz

Frequency

COM-NO

CONTACT sets

0.5GHz Frequency

1.0GHz

RD (ARD)

NEW

26.5GHz, 18GHz COAXIAL SWITCH

RD COAXIAL SWITCHES (ARD)

FEATURES

TYPICAL APPLICATIONS

SPECIFICATIONS Contact Arrangement Contact material Initial contact resistance

Rating

Contact input power*1

Indicator rating

Contact rating Initial contact resistance (Measured by 5V 100mA)

High frequency characteristics (Impedance 50Ω)

Expected life (min. operation)

V.S.W.R. (max.) Insertion loss (dB, max.) Isolation (dB, min.) Mechanical (at 180 cpm)

SPDT

Transfer Gold plating Max. 100mΩ

SPST

120W 2.2GHz (V.S.W.R. 1.2 or less, no contact switching) 150W 2.2GHz (V.S.W.R. 1.2 or less, no contact switching when cooling fan is used) —

120W 3GHz (V.S.W.R. 1.15 or less, no contact switching, ambient temperature 40°C [SPDT], 25°C [Transfer])#1 Max. 30V 100mA

Max. 5V 100mA Max. 1Ω

—

to 1 GHz

1 to 4

4 to 8

8 to12.4

12.4 to 18

1.1

1.15

1.25 0.3 70

1.35 0.4 65

1.5 0.5 60

0.2 85

18 to 26.5#2 1.7 0.8 55

5 × 106 5 × 106 (5W, to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2)

Electrical (at 20 cpm)

—

See “REFERENCE DATA” 104 104 (80W, to 2.2GHz, impedance 50Ω, V.S.W.R.; max. 1.2, ambient temperature; max. 40°C 104°F)

Characteristics SPDT

Functional*5 Destructive*6 Functional*7 Destructive Ambient temp Humidity

Unit weight (Approx.)

RD (ARD) ORDERING INFORMATION Ex.

Product name RD

Operating function

HF data attached (SPDT, Transfer) Nil: Solder terminal Nil: No HF test data (SPDT, Transfer), attached Lead wire (SPST) Q: HF test data attached C: Connector cable (SPDT type only) Operation terminal

Note: Sealed types are also available. (SPDT type only)

TYPES 1. SPDT 1) Solder terminal Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

Note: Standard packing; Carton: 1 pc. Case: 20 pcs.

2) Connector cable Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

Note: Standard packing; Carton: 1 pc. Case: 10 pcs.

2. Transfer 1) Solder terminal Operating function

Failsafe

Latching

Latching with TTL driver (with self cut-off function)

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24 5 12 24

RD (ARD) 3. SPST Operating function

Failsafe

Latching

Nominal operating voltage, V DC 4.5 12 24 4.5 12 24

Part No. ARD0004H ARD00012 ARD00024 ARD0104H ARD01012 ARD01024

Note: Standard packing; Carton: 1 pc. Case: 20 pcs.

COIL DATA (at 20°C 68°F) 1. SPDT 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 186.7 70.0 40.4

Nominal power consumption, mW 840 840 970

2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 155.6 62.5 37.5

Nominal power consumption, mW 700 750 900

3) Latching with TTL driver type (with self cut-off function) Nominal operating voltage, V DC 5 12 24

TTL logic level (see TTL logic level range) ON OFF 2.4 to 5.5V

0 to 0.5V

Switching frequency Max. 180 cpm (ON time : OFF time = 1 : 1)

2. Transfer 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 342.2 128.3 69.6

Nominal power consumption, mW 1540 1540 1670

2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 266.7 104.2 58.3

Nominal power consumption, mW 1200 1250 1400

3) Latching with TTL driver type (with self cut-off function) Nominal operating voltage, V DC 5 12 24

TTL logic level (see TTL logic level range) ON OFF 2.4 to 5.5V

0 to 0.5V

Switching frequency Max. 180 cpm (ON time : OFF time = 1 : 1)

3. SPST 1) Failsafe type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 400 150 75

Nominal power consumption, mW

1800

RD (ARD) 2) Latching type Nominal operating voltage, V DC 4.5 12 24

Nominal operating current, mA (+10%/–15%) 400 150 75

• Operating voltage range (1) SPDT, Transfer type 1) Failsafe type

2) Latching type

Nominal power consumption, mW

1800

3) Latching with TTL driver type (with self cut-off function)

4.5 12 24 V V V 6 16 32

5 12 24 V V V 6.67 16 32

5.25 14 28

5.83 14 28

4.5 12 24

5 12 24

3.75 10 20

4.17 10 20

Nominal voltage 3

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0 –55–40 –20

Allowable range for use Recommended operation voltage range Recommended release voltage range

8 16

3.33

8 16

2.25

6 12

2.5

6 12

1.5

4 8

Allowable range for use

1.67

Allowable range for use

0.75

2 4

Recommended set/reset voltage range

0.83

Recommended set/reset voltage range

0 –55–40 –20

0 0

Nominal voltage

Nominal voltage 3

0 0 –55–40 –20

Ambient temperature °C

0 20 40 60 Ambient temperature °C

4) TTL Logic level range 5.5 5

3 2.4 2 ON OFF

1 0.5 0 –55–40 –20

0 20 40 60 Ambient temperature °C

Note) Please consult us for use that is outside this range.

(2) SPST type 1) Failsafe type

2) Latching type

4.5 12 24 V V V 6 16 32

5.25 14 28

4.5 12 24

4.5 12 24 3.75 10 20

3.75 10 20 Nominal voltage 3

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0 –55–40 –20

Nominal voltage

Allowable range for use

8 16

2.25

6 12

1.5

4 8

0.75

2 4

0 0

Ambient temperature °C

0 0 –55–40 –20

Allowable range for use 0

Ambient temperature °C

0 20 40 60 Ambient temperature °C

RD (ARD) DIMENSIONS

mm inch

1. SPDT 1) Solder terminal

3.5 .138 3.5 .138 2.0 .079

4.3 .169

11.2 .441 3.5 .138

7.0 .276 0.3 .012

Solder terminal

NC COM NO Indicator Coil

GND +

39.0 1.535

Serial No.

4.5 .177

2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia.

7.2 .283

7.3 .287 2.1 .083 11.2 .441 22.4 .882 30.0 1.181 34.0 1.339

3-SMA connector

13.2 .520

Tolerance: ±0.3 ±.012

Failsafe

Latching 1 COM 2

NC COM NO

Latching with TTL driver (with self cut-off function) 1 COM 2 Indicator terminal Coil terminal

GND V GND

GND Logic 1 Logic 2

Coil 1 Coil 2

NC COM NO Indicator GND +

Serial No.

Coil

1 COM 2 GND 1

Serial No.

Indicator

1 COM 2

Coil

V GND 1

Serial No.

Indicator 2 Coil

RD (ARD) 2) Connector cable

mm inch

Pin No. Fail safe Latching Latching with TTL driver

1 – –

2 NC 1

–

Indicator 3 4 COM NO COM 2 COM

5 – –

6 – –

–

Coil 7 8 GND + GND 1 Logic GND 1

9 – 2 Logic 2

D-sub connector pin contact type

2345 Pin No. 1 6789 12.55 .494

3.05 dia. .120 dia. 25.0 .984 30.8 1.213

5.95 .234

1.2 .047

PVC wires 110.0±10 4.331±.394

NC COM NO GND +

39.0 1.535

Serial No.

4.5 .177

Indicator Coil

2-3.1 dia. 2-.122 dia. 2-2.4 dia. 2-.094 dia.

7.2 .283

7.3 .287 2.1 .083

3-SMA connector

11.2 .441 22.4 .882 30.0 1.181 34.0 1.339

13.2 .520

RD (ARD) 2. Transfer

mm inch

45.70 1.799 15.24 .600

Max. 5.0 .197

0.30 .012

5.08 .200 5.08 .200 Solder terminal

5.08 .200 2.00 .079

3-3.80 dia. 3-.150 dia. 10.15 .400 9.65 39.0 .380 1.535

20.3 .799

9.65 .380 7.2 .283

4-SMA connector 32.0 1.260 16.2 .638 J1

32.0 1.260

16.2 .638

1 to 1.5 .039 to .059

Tolerance: ±0.3 ±.012

55.5 2.185

Fail safe Latching Latching with TTL driver

Failsafe

Coil terminal GND

Latching

Indicator terminal NC COM NO

Coil terminal GND 1 2

NC: J1-J2, J3-J4 NO: J1-J3, J2-J4 POS1: J1-J2, J3-J4 POS2: J1-J3, J2-J4 POS1: J1-J2, J3-J4 POS2: J1-J3, J2-J4

Latching with TTL driver (with self cut-off function)

Indicator terminal 1 COM 2

Coil terminal V GND Logic 1 Logic 2

Indicator terminal 1 COM 2

RD (ARD) 3. SPST Lead wire length 270±10 10.630±.394 Part No.

Fail safe type Lead wire

Lot No.

ARD00012 00000 JAPAN

Coil Lead wire 11.1 .437

12.5 .492

OFF

Non polarized relay (without diode)

Latching type 24.90 .980

Lead wire (Red)

Set

Reset

Set

0.4 .016

7.80 .307

Lead wire (Black) 1.60 .063 2.30 .091

2.30 .091

35 3. 2 C .13 C

19.05 .750 12.70 .500

Reset

0.4 .016 12.70 .500

7.925 .312

Tolerance: ±0.3 ±.012

2-2-56UNC-2B

• Measuring method (Impedance 50Ω) (V.S.W.R.) (Insertion loss) (Isolation)

• Measuring equipment

The contact must be ON. The contact must be ON. (without DUT board’s loss) The contact must be OFF. At that time, conduct measurement with an averaging of 64 times and 1% smoothing.

Network analyzer

B A R

HP 8510C RF OUT

PORT2

PORT1

B S parameter A test set R HP 8515A RF IN

3.5mm calibration kit (HP85052B)

Port1/Connector W

• Connector

Port2/Connector E

No. A2

3.3 .130

1.55 .061

ARD00012 00000 JAPAN 1

3.3 .130

A —A

Contents

Product name

Q 3.5 mm testport, Extention cable HP85131-60013 W

3.5 mm coaxial adaptor

HP83059

SMA adaptor

HP125.771.000

1.80 .071

• Input power test Sample: ARD01024, Quantity: n = 5 Frequency: 2.2 GHz, Ambient temperature: Room temperature Test circuit: Signal generator

RD coaxial switch SPST type Circulator Sensor

Amplifier Power meter Attenuator Termination

Sample No. 1 No. 2 No. 3 No. 4 No. 5

Cooling fan

100

110

120

Input power, W 130 140 150

160

170

180

190

200

Without

With

: No abnormality for high frequency and operating characteristics were observed after 30 min. power carrying.

(→; Test sequence)

RD (ARD) REFERENCE DATA 1-(1). High frequency characteristics (SPDT) Sample: ARD10012 Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

1.8

0.1

1.7

0.2

1.6 1.5 1.4 1.3

Isolation, dB

1.9

Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.3 0.4 0.5

30 40 50 60

0.6

1.2

0.7

1.1

0.8

1.0

0.9

1.0

100

1GHz 4GHz

8GHz 12.4GHz 18GHz Frequency

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1-(2). High frequency characteristics (Transfer) Sample: ARD60012 Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

0.1

1.7

0.2

1.6 1.5 1.4 1.3

Isolation, dB

1.9 1.8 Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.3 0.4 0.5

30 40 50

0.6

1.2

0.7

1.1

0.8

1.0

0.9

1.0

100

1GHz 4GHz 8GHz 12.4GHz 18GHz

26.5GHz

1GHz 4GHz 8GHz 12.4GHz 18GHz

Frequency

26.5GHz

Frequency

1GHz 4GHz 8GHz 12.4GHz 18GHz Frequency

26.5GHz

1-(3). High frequency characteristics (SPST) Measuring method: Measured with HP network analyzer (HP8510).

• Insertion loss

• Isolation

1.8

0.2

1.6

1.4

1.2

1.0 45MHz

1GHz

2GHz Frequency

3GHz

Isolation, dB

2.0

Insertion loss, dB

V.S.W.R.

• V.S.W.R.

0.4

0.6

0.8

1.0 45MHz

1GHz

2GHz Frequency

3GHz

100 45MHz

1GHz

2GHz Frequency

3GHz

RE (ARE)

RE RELAYS (ARE)

2.6 GHz SMALL MICROWAVE RELAYS

FEATURES 20.2 .795

11.2 .441

• Excellent high frequency characteristics (to 2.6GHz)

8.9 .350

20.2 .795

Type 11.2 .441 9.6 .378

mm inch

Impedance 50Ω

Impedance 75Ω

Frequency V.S.W.R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.) V.S.W.R. (Max.) Insertion loss (dB, Max.) Isolation (dB, Min.)

900MHz

2.6GHz

1.3

1.7

0.2

0.7

1.2

1.5

0.2

0.5

• Compact and slim size Size: 20.2(L) × 11.2(W) × 8.9(H)* mm .795(L) × .441(W) × .350(H) inch *Surface-mount terminal is 9.6 mm .378 inch size.

TYPICAL APPLICATIONS 1. Broadcasting and video markets. • Digital broadcasting market • STB/tuner market, etc. 2. Communications market • Antennae switching • All types of wireless devices

• Surface-mount type also available

SPECIFICATIONS Contact

Coil (at 20°C, 68°F)

Arrangement Contact material Initial contact resistance

Contact rating

Rating Contact carrying power Max. switching voltage Max. switching current V.S.W.R.

High frequency characteristics Insertion loss (Impedance 75Ω) Isolation V.S.W.R. High frequency characteristics Insertion loss (Impedance 50Ω) Isolation

Expected life (min. operations)

Mechanical (at 180 cpm) 1W, 2.6GHz, [Impedance 75Ω, V.S.W.R. & 1.5] Electri- [Impedance 50Ω, V.S.W.R. & 1.7] cal 10mA 24V DC (resistive load) (at 20cpm)

Nominal operating power

200 mW

Functional*7 Destructive

Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight

Ambient temp.

–40°C to 70°C –40°F to 158°F

Humidity

5 to 85% R.H.

Remarks

Approx. 5 g .18 oz

3×105

RE (ARE) ORDERING INFORMATION Ex. ARE

Contact arrangement

Operating function

Terminal shape

1: 1 Form C

0: Single side stable type (Impedance 50Ω) 3: Single side stable type (Impedance 75Ω)

Nil: Standard PC board terminal A: Surface-mount terminal

Coil voltage (DC) 03: 4H: 06: 09: 12: 24:

3V 4.5 V 6V 9V 12 V 24 V

Packing style Nil: Carton packing (Standard PC board terminal only) Tube packing (Surface-mount terminal only) Z: Tape and reel packing (picked from 12/13/14 pin side)

Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X type tape and reel packing (picked from 8/9/10/11/12/13/14-pin side) is also available. Suffix “X” instead of “Z”.

ARE10A03

Nominal voltage, V DC 3

Pick-up voltage, V DC (max.) (initial) 2.25

Drop-out voltage, V DC (min.)(initial) 0.3

ARE10A4H ARE10A06 ARE10A09 ARE10A12 ARE10A24

4.5 6 9 12 24

3.375 4.5 6.75 9 18

0.45 0.6 0.9 1.2 2.4

Surface-mount terminal

Nominal operating current, mA (±10%) 66.7

Nominal operating power, mW 200

Max. allowable voltage, V DC (at 60°C) 3.3

101 180 405 720 2,880

44.4 33.3 22.2 16.7 8.3

200 200 200 200 200

4.95 6.6 9.9 13.2 26.4

Coil resistance, Ω (±10%)

Surface-mount terminal

Nominal voltage, V DC

Pick-up voltage, V DC (max.) (initial)

Drop-out voltage, V DC (min.)(initial)

Coil resistance, Ω (±10%)

ARE1303 ARE134H ARE1306 ARE1309 ARE1312 ARE1324

ARE13A03 ARE13A4H ARE13A06 ARE13A09 ARE13A12 ARE13A24

3 4.5 6 9 12 24

2.25 3.375 4.5 6.75 9 18

0.3 0.45 0.6 0.9 1.2 2.4

45 101 180 405 720 2,880

Nominal operating current, mA (±10%) 66.7 44.4 33.3 22.2 16.7 8.3

Nominal operating power, mW 200 200 200 200 200 200

Max. allowable voltage, V DC (at 60°C) 3.3 4.95 6.6 9.9 13.2 26.4 mm inch

DIMENSIONS 1. Standard PC board terminal (75Ω, 50Ω type) Schematic (Bottom view)

20.2 .795

Stand off

11.2 .441

14 13 12 11 10 9 8

Direction indication

COM

(Deenergized condition) 8.6 .339 0.3 .012

3.0 .118 2.54 .100

0.5 .020

0.3 .012 (1.49) (.059)

7.62 .300

0.3 .012 (2.09) (.082)

General tolerance: ±0.3 ±.012

RE (ARE) mm inch

2. Surface mount terminal • 75Ω type Schematic (Top view)

20.2 .795

(0.7) (.028)

NC 13.2 ±0.5 .520 ±.020

COM

14 13 12 11 10 9 8

11.2 .441

Direction indication (1.3) (.511)

(Deenergized condition) 0.3 .012

8.6 .339 0.3 .012

2.54 .100

(1.49) (.059)

0.5 .020

0.3 .012

7.62 .300

9.6 .378

(2.09) (.082)

General tolerance: ±0.3 ±.012

• 50Ω type

0.5 .020 4.12 .162 1.04 .041 (0.7) (.028)

Schematic (Top view)

20.2 .795 14.74 .580 3.5 .138 1.04 .041

0.5 .020

1.04 .041

0.5 .020 4.12 .162 1.04 .041

COM

14 13 12 11 10 9 8

Direction indication

(Deenergized condition)

13.2 ±0.5 11.2 .520 ±.020 .441

(1.3) (.511) 8.6 .339

0.3 .012

(1.49) (.059)

0.3 .012

7.62 .300

9.6 .378

(2.09) (.082)

General tolerance: ±0.3 ±.012

REFERENCE DATA 1-(1). High frequency characteristics (75Ω type) (Standard PC board terminal) • Insertion loss characteristics

• Isolation characteristics

2.0

1.9

0.1

1.8

0.2

1.6 1.5

COM-NO

1.4 1.3

0.3 0.4 0.5 0.6 COM-NO

0.8

1.1

COM-NC 3GHz

900MHz Frequency

COM-NC

30 40 50 60

0.7

1.2 1

COM-NC Isolation, dB

1.7

Insertion loss, dB

V.S.W.R.

• V.S.W.R. characteristics

0.9

1.0

100

3GHz

900MHz

COM-NO

Frequency

900MHz

3GHz Frequency

V.S.W.R.

RE (ARE)

NOTES

SMD RELAYS WITH 8GHz CAPABILITIES

FEATURES 9.00 .354

14.0 .551

8.20 .323

14.0 .551

9.00 .354 8.20 .323

SPECIFICATIONS Characteristics

Contact Arrangement Contact material Initial contact resistance

2 Form C Gold alloy Max. 150mΩ

Contact rating Rating

Contact carrying power

High frequency characteristics (Initial) (~5GHz, Impedance 50Ω)

Max. switching voltage Max. switching current V.S.W.R. Insertion loss (without D.U.T. board’s loss) Between open contacts Isolation Between contact sets Input power Mechanical (at 180 cpm)

Expected life (min. operations)

1W, at 5GHz, Electrical V.S.W.R. & 1.25 (at 10mA 10V DC 20cpm) (resistive load)

1W (at 5 GHz, Impedance 50 Ω, V.S.W.R. &1.25) 10mA 10V DC (resistive load) 1W (at 5 GHz, Impedance 50 Ω, V.S.W.R. &1.25) 30 V DC 0.3 A DC Max. 1.25 Max. 0.5dB Min. 35dB Min. 30dB

1W (at 5GHz, impedance 50 Ω, V.S.W.R. &1.25, at 20°C) 107 106 106

Coil (at 20°C, 68°F) Single side stable 2 coil latching

Nominal operating power 200 mW 150 mW

RJ (ARJ) ORDERING INFORMATION Ex. ARJ Contact arrangement Operating function 2: 2 Form C

2 Terminal shape

0: Single side stable Nil: Standard PC board terminal 2: 2 coil latching A: Surface-mount terminal

Coil voltage (DC)

Packing style

03 : 3V 4H: 4.5V 12 : 12V 24 : 24V

TYPES AND COIL DATA (at 20°C 68°F) 1. Standard PC board terminal • Packing of standard PC board terminal: 50 pcs. in an inner package (carton); 500 pcs. in an outer package Operating function

Coil Rating, V DC

Single side stable

3 4.5 12 24

Operating function

Coil Rating, V DC

2 coil latching

3 4.5 12 24

Part No. Standard PC board terminal ARJ2203 ARJ224H ARJ2212 ARJ2224

Set voltage, V DC (max.) (initial)

Reset voltage, V DC (min.) (initial)

2.25 3.375 9 18

Nominal operating Coil resistance, current, mA Ω (±10%) (±10%) 50 33.3 12.5 6.3

60 135 960 3,840

Nominal operating power, mW

Max. allowable voltage, V DC

200 200 200 200

3.3 4.95 13.2 26.4

Nominal operating power, mW

Max. allowable voltage, V DC

150 150 150 150

3.3 4.95 13.2 26.4

Coil Rating, V DC

Single side stable

3 4.5 12 24

Operating function

Coil Rating, V DC

2 coil latching

3 4.5 12 24

• Isolation characteristics 0

1.9 Insertion loss, dB

1.7 1.6 1.5 1.4

Isolation, dB

0.5

1.8 V.S.W.R.

1.0 1.5

Between contact sets 30 40 50

2.0

1.3

1.2

Between open contact

2.5

1.1 1.0

45MHz

5GHz Frequency

3.0

8GHz

45MHz

5GHz Frequency

80 45MHz

8GHz

5GHz Frequency

DIMENSIONS

8GHz

mm inch

1. Standard PC board terminal

Schematic (Bottom view) Expansion of A 10.6 .417

Single side stable Direction indication + 1

10.4 .409

0 to 0.2 0 to .008 12.2 .480

24 ribs should be soldered with PC board ground. 9.00 .354

14.0 .551

0.50 .020

8.89 .350 12.70 .500 11.40 .449

4 NO 5 8

10 NC 9

4 NO 5 + 8

7 6 Com

(Deenergized condition)

Com 2 3 –

7 6 – Com

(Reset condition)

3Better HF characteristics may be obtained when this 8.20 portion is soldered with .323 PC board ground.

3.50 .138

+ 1

Com 2 3 –

10 NC 9

(Typical: 0.1) (Typical: .004)

2 coil latching

0.50 .020

0.40 .016

0.20 .008 0.50 .020

6.36 .250

7.62 .300

3.81 .150

1All bottom surface of the base should be touched closely or soldered with PC board ground. 0.20 .008

0.15 .006

General tolerance: ±0.3 ±.012

2. Surface mount terminal Schematic (Top view) 0.50 .020

10.4 .409 0.50 .020 0.40 .016

Expansion of A

10.6 .417

Direction indication 8

3.81 .150

8.89 .350 12.2 .480

0 to 0.2 0 to .008

24 ribs should be soldered with PC board ground.

15.0 .591

2 coil latching

Com 7 6

+ 8

NC 10

NO + 1

2 3 – Com

(Deenergized condition) 3Better HF characteristics 8.20 may be obtained when this .323 portion is soldered with PC board ground.

0.20 .008

6.36 .250

(Typical: 0.1) (Typical: .004)

9.00 .354

14.0 .551

11.40 .449

Single side stable

10.0 .394

0.50 .020 1All bottom surface of the base should be touched closely or soldered with PC board ground.

Com 7 6 –

NC 10

NO + 1

2 3 – Com

(Reset condition)

RJ (ARJ) NOTES 2. Measuring method (Impedance 50Ω)

7.40 .291 1.50 .059

8510C

(10.75) (.423)

14.40 .570

RF OUT

1.33 .052 2.57 .101

RF IN

3.81 .150

PORT1

Product name

HP 85131-60013

HP 83059

21±0.8 dia. .827±.031 dia.

2.0±0.5 .079±.020 100±1 dia. 3.937±.039 dia. 370±2 dia. 14.567±.079 dia.

2.0±0.2 .079±.008

a. di ia. 70 8 d . 0 2 6- -.0 6

Measuring board 1) Dimensions <Surface mount terminal>

0.40 .016 0.40 .016

7.22 .284

7.07 .278 2.81 .111 0.40 .016 8.89 .350 12.04 .474 8.35 .329

0.40 .016 0.40 .016

6.72 .265

20.00 6.62 .787 .261

0.50 .020 8.89 .350 11.70 .461 30.00 1.181

0.50 .020

<Calibration board> 14.5 .571 10.0 .394 0.40 or 0.50 .016 or .020 1.76 or 1.86 .069 or .073

17.00 .669

0.80 .031

12.70 .500 17.00 .669 6-1.86 0.90 6-.073 .035

Contents 3.5 mm testport, Extension cable 3.5 mm coaxial adaptor

Notes) 1. All bottom surface of the base should be touched closely or soldered with PC board ground. 2. 4 ribs should be soldered with PC board ground.

6-1.76 6-.069

a. di ia. 60 d 0. 24 4 -.0 4 1.00 .039

7.62 .300

2) Dimensions of plastic reel

13±0.2 dia. .512±.008 dia. 24.4 +2 0 .961 +.079 0

8515A

Connector No.

8.35 .329

. dia . .70 dia 6-1 .067 6-

6.20 .244 11.40 .449 9.40 ° o 5 .370

78 78 -0.4 -.0 0 16 dia dia . .

B S parameter A test set R

Network B analyzer A R

16.00 24.00 .630 .945

11.20 .441

PORT2

45°

11.50 .453

5°

1.75 .069

8.80 .346 0.40±0.05 8.50 .337 .016±.002 3 to

ia. a. .1 d i +0 0 0+.0004 d 1.5 59 .0

16.00 .630

4.00 .157 2.0 (Accumulation 10 pitch: .079 40±0.1 1.575±.004)

<Standard PC board terminal> . dia a. 60 di 1. 3 4- -.06 4

1. Tape and reel packing 1) Tape dimensions

0.40 .016

ole hh . oug dia Thr -0.40 dia. 86 -.016 86

1.00 .039 20.00 .787 45°

30.00 1.181

1.5 GHz MICROWAVE RELAY

20.2 .795

RK RELAYS

11.2 .441 9.7 .382

mm inch

SPECIFICATIONS Contact

Characteristics

Arrangement

1 Form C

Initial insulation resistance*1

Contact material

Gold-clad

Between open contacts Initial Between contact and coil breakdown 2 Between contact and voltage* earth terminal

Initial contact resistance, max. (By HP4328A)

Rating

10 W

Max. switching voltage

30 V DC

Max. switching current

0.5 A

Nominal switching capacity High frequency V.S.W.R. characteristics Insertion loss (Impedance 50Ω) Isolation Expected life (min. operations)

100 mΩ

Max. switching power

0.01 A 24 V DC 10 W (at 1.2 GHz, Impedance 50Ω) Max. 1.5 (at 900 MHz)

500 Vrms 1,000 Vrms 500 Vrms

Operate time [Set time]* (at nominal voltage) Release time (without diode) [Reset time]* (at nominal voltage) *2

Approx. 6 ms [Approx. 5ms]

Approx. 3 ms [Approx. 5ms] Max. 60°Cwith nominal coil voltage across coil and at nominal switching capacity

Temperature rise

Max. 0.3 dB (at 900 MHz) Min. 60 dB (at 1.5 GHz)

Functional*4

Shock resistance

0.01 A 24 V DC

3×105

Destructive*

Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm

Functional*6

Vibration resistance

105

10 W 1.2 GHz

Min. 196 m/s2 {20 G} 5

5×106

Mechanical Electrical

Min. 100 MΩ at 500 V DC

Destructive

Coil (at 25°C, 68°F) Nominal operating power Single side stable

200 mW

1 coil latching

200 mW

2 coil latching

400 mW

Conditions for operation, transport and storage

Ambient temp.

(Not freezing and condensing Humidity at low temperature)

–40°C to 70°C –40°F to 158°F 5 to 85% R.H. Approx. 4.4 g .155 oz

Unit weight Remarks

ORDERING INFORMATION Ex. RK

24V

Contact arrangement

Operating function

Coil voltage, DC

1: Standard type 1R: R type (See Schematic on next page.)

Nil: Single side stable L: 1 coil latching L2: 2 coil latching

3, 4.5, 5, 6, 9, 12, 24 V

RK TYPES AND COIL DATA (at 20°C 68°F) • Single side stable type Part No. RK1-3V RK1-4.5V RK1-5V RK1-6V RK1-9V RK1-12V RK1-24V

RK1R-3V RK1R-4.5V RK1R-5V RK1R-6V RK1R-9V RK1R-12V RK1R-24V

Nominal voltage, V DC

Pick-up voltage, max. V DC

Drop-out voltage, min. V DC

Coil resistance, Ω (±10%)

Nominal operating current, mA

Nominal operating power, mW

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

0.3 0.45 0.5 0.6 0.9 1.2 2.4

45 101 125 180 405 720 2,880

66.7 44.4 40.7 33.3 22.2 16.7 8.3

200 200 200 200 200 200 200

Nominal voltage, V DC

Set voltage, max. V DC

Reset voltage, max. V DC

Coil resistance, Ω (±10%)

Nominal operating current, mA

Nominal operating power, mW

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

45 101 125 180 405 720 2,880

66.7 44.4 40 33.3 22.2 16.7 8.3

200 200 200 200 200 200 200

Nominal voltage, V DC

Set voltage, max. V DC

Reset voltage, max. V DC

Coil resistance, Ω (±10%)

Nominal operating current, mA

Nominal operating power, mW

3 4.5 5 6 9 12 24

2.25 3.38 3.75 4.5 6.75 9 18

22.5 50.6 62.5 90 202.5 360 1,440

133.3 88.9 80 66.7 44.4 33.3 16.7

400 400 400 400 400 400 400

Maximum. allowable voltage, V DC (at 60°C 140°F) 3.3 4.95 5.5 6.6 9.9 13.2 26.4

• 1 coil latching type Part No. RK1-L-3V RK1-L-4.5V RK1-L-5V RK1-L-6V RK1-L-9V RK1-L-12V RK1-L-24V

RK1R-L-3V RK1R-L-4.5V RK1R-L-5V RK1R-L-6V RK1R-L-9V RK1R-L-12V RK1R-L-24V

Maximum. allowable voltage, V DC (at 60°C 140°F) 3.3 4.95 5.5 6.6 9.9 13.2 26.4

• 2 coil latching type Part No. RK1-L2-3V RK1-L2-4.5V RK1-L2-5V RK1-L2-6V RK1-L2-9V RK1-L2-12V RK1-L2-24V

RK1R-L2-3V RK1R-L2-4.5V RK1R-L2-5V RK1R-L2-6V RK1R-L2-9V RK1R-L2-12V RK1R-L2-24V

Maximum. allowable voltage, V DC (at 60°C 140°F) 3.3 4.95 5.5 6.6 9.9 13.2 26.4

RK DIMENSIONS

mm inch PC board pattern (Bottom view) 20.2 .795

11.2 .441

Single side stable and 1 coil latching

9.1 .358 0.6 .024 3.5 .138

2.54 .100

9-0.9 dia. 9-.035 dia. 2.54 2.54 .100 .100

7.62 .300 7.62 .300

Single side stable and 1 coil latching 2-0.6×0.3 2-.024×.012

2 coil latching 10-0.9 dia. 10-.035 dia. 2.54 2.54 .100 .100

Stand-off 3- 0.45 3- .018

4-0.6×0.25 4-.024×.010 7.62 .300

2 coil latching 3-0.6×0.3 3-.024×.012

Tolerance: ±0.1 ±.003

Stand-off 3- 0.45 3- .018

4-0.6×0.25 4-.024×.010

General tolerance: ±0.3 ±.012

Schematic (Bottom view)

14 13 12 11 10

1 coil latching +7

COM

(Deenergized condition)

2 coil latching

−7

14 13 12 11 10

RESET

COM

SET

(Reset condition)

Direction indication

−1

Direction indication

Single side stable

−

+ +

14 13 12 11 10

RESET

COM

(Reset condition)

REFERENCE DATA 1.-(1) High frequency characteristics (Impedance 75Ω) Sample: RK1-12V Measuring method: Measured with HP network analyzer (HP8753C)

• V.S.W.R. characteristics

• Insertion loss characteristics

2.0

• Isolation characteristics 0

0 COM-NO

1.6

1.4

COM-NO

1.2

0.2

0.4

Isolation, dB

Insertion loss, dB

V.S.W.R.

1.8

COM-NC

0.6

0.8

COM-NO

COM-NC

COM-NC 1.0

300kHz

1.5GHz Frequency

3GHz

1.0 300kHz

1.5GHz Frequency

3GHz

100 300kHz

1.5GHz Frequency

SET

3GHz

RK 1.-(2) High frequency characteristics (Impedance 50Ω) Sample: RK1-5V Measuring method: Measured with HP network analyzer (HP8753C)

• Insertion loss characteristics 0

0.2

2.0

Insertion loss, dB

1.8

V.S.W.R.

COM-NC 1.6 COM-NO 1.4

• Isolation characteristics

COM-NO 0.4

Isolation, dB

• V.S.W.R. characteristics

COM-NO

0.6

60 COM-NC

COM-NC 1.2

300kHz

1.5GHz Frequency

1.0 300kHz

3GHz

2. Coil temperature rise

1.5GHz Frequency

Operate/Reset time, ms

RK1-L2-12V

60 RK1-12V, RK1-L-12V 40

3GHz

Sample: RK1-L-12V, RK1-L2-12V No. of samples: n = 12

1.5GHz Frequency

3.-(2) Set/Reset time (Latching)

Sample: RK1-12V; No. of samples: n = 6

100

100 300kHz

3GHz

3.-(1) Operate/Release time (Single side stable)

Sample: RK1-12V, RK1-L-12V, RK1-L2-12V No. of samples: n = 6 Carrying current: 10 mA Ambient temperature: 25°C 77°F

Temperature rise, °C

Set/Reset time, ms

1.0

0.8

Operate time 6

Max. Min. Max.

Set time Reset time

Max. Max. Min. Min.

Min. Release time

100 130 150 Voltage applied to coil, %V

100 120 150 Voltage applied to coil, %V

100 130 Voltage applied to the coil (%V)

4.-(1) Mechanical life test (Single side stable)

4.-(2) Mechanical life test (Latching)

4.-(3) Mechanical life test

Sample: RK1-12V; No. of samples: n = 12

Sample: RK1-L2-12V No. of samples: n = 12

Sample: RK1-12V No. of samples: n = 20 (20 × 2 contacts)

Pick-up voltage 8

Max. Min.

6 Drop-out voltage Max. 2 0

Min.

100 500 1,000 No. of operations, ×104

10 8

Max. Min.

6 4

Contact resistance, mΩ

300

12 Set/Reset voltage, V

Pick-up/drop-out voltage, V

250 200 150 100

Max.

Min. 100 500 1,000 No. of operations, ×104

50 100 500 1,000 No. of operations, ×104

RK 5. Electrical life test (0.01 A 24 V DC)

6. Ambient temperature characteristics

7. Contact resistance distribution (initial)

Sample: RK1-12V; No. of samples: n = 6

Sample: RK1-12V No. of samples: n = 50 (50 × 2 contacts)

10 Pick-up voltage Max. Min.

8 6

–40 –20 –40 –4

Drop-out voltage Max. Min.

2 0

10 20 No. of operations, ×104

20 Drop-out voltage 20 40 60 80 68 104 140 176 –20 Ambient temperature, °C °F –40

0 –10

Rate of change, %

Sample: RK1-12V; No. of samples: n = 10

Rate of change, %

8.-(2) Influence of adjacent mounting

Sample: RK1-12V; No. of sample: n = 10

OFF OFF

OFF

0 OFF

–10

0 –10

ON condition

5 10 .197 .394 Inter-relay distance, (mm, inch)

OFF condition

Rate of change, %

ON ON

Drop-out voltage

Pick-up voltage

OFF condition

8.-(1) Influence of adjacent mounting

Pick-up voltage

40 Pick-up voltage Quantity

Rate of change, %

Pick-up/drop-out voltage, V

10 Drop-out voltage 0

–10

ON condition

5 10 .197 .394 Inter-relay distance, (mm, inch)

20 30 40 50 Contact resistance, mΩ

LOW PROFILE HIGH FREQUENCY RELAY

• High frequency relay with the low profile of 4 mm .157 inch • Excellent high frequency characteristics Isolation: Min. 10dB (at 1.8 GHz) Insertion loss: Max. 1.0dB (at 1.8 GHz) V.S.W.R.: Max. 1.3 (at 1.8 GHz) • High sensitivity in small size Size: 10.6 × 9 × 4 mm .417 × .354 × .157 inch Nominal operating power: 140 mW • Utilizes tube package for automatic mounting. • Self-clinching terminal also available

9 .748

10.6 .417

RP RELAYS

4 .157

mm inch

SPECIFICATIONS Contact

Characteristics

Arrangement Contact material

Stationary Initial contact resistance, max. (By voltage drop 6 V DC 0.1 A) Nominal switching capacity

Rating

V.S.W.R. High frequency characteristics (Impedance 50Ω)

Expected life (min. operations)

Max. operating speed (at rated load)

1 Form C

50 mΩ

Isolation

Min. 15 dB (at 1 GHz) Min. 10 dB (at 1.8 GHz)

Mechanical (at 180 cpm)

Shock resistance

Min. 500 m/s2 {50 G}

Destructive*5

Min. 1,000 m/s2 {100 G}

Destructive Conditions for operation, transport and storage

105 (1 W at 1.8 GHz; V.S.W.R.: max. 1.3)

1.5 to 12 V DC

140 mW

24 V DC

270 mW

10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm

Ambient temp.

–40°C to 70°C –40°F to 158°F

(Not freezing and condensing Humidity at low temperature)

Coil (at 25°C, 68°F)

• Antenna switching of mobile phone • Switching signal of measuring equipment • All types of compact wireless devices

Functional*4

Functional*6

Vibration resistance

10 (0.1 A 30 V DC resistive load)

TYPICAL APPLICATIONS

Max. 50°Cwith nominal coil voltage across coil and at nominal switching capacity

Temperature rise

Nominal operating power

Max. 2 ms (Approx. 1 ms)

Release time(without diode)*3 (at nominal voltage)

5×106

Voltage type

750 Vrms for 1 min. 1,500 Vrms for 1 min. Max. 3 ms (Approx. 1.5 ms)

Operate time*3 (at nominal voltage)

0.1 A 30 V DC Contact switching power: 1 W (Max. 1.8 GHz); Contact carrying power: 3 W (Max. 1.2 GHz) 1 W (Max. 1.8 GHz) Max. 1.2 (at 1 GHz) Max. 1.3 (at 1.8 GHz) Max. 0.5 dB (at 1 GHz) Max. 1 dB (at 1.8 GHz)

20 cpm Min. 1,000 MΩ at 500 V DC

Initial breakdown Between open contacts voltage*2 Between contacts and coil

Gold-clad silver

Insertion loss

Electrical (at 20 cpm)

Initial insulation resistance*1

Silver alloy

Movable

5 to 85% R.H. Approx. 1 g .04 oz

Unit weight Remarks

ORDERING INFORMATION Ex. RP

Contact arrangement

Operating function

Terminal shape

Coil voltage (DC)

1: 1 Form C

Nil: Single side stable

Nil: Standard PC board terminal H: Self-clinching terminal

1.5, 3, 4.5, 5, 6, 9, 12, 24 V

Note: Standard packing; Carton: 50 pcs. Case 1,000 pcs.

RP TYPES ANE COIL DATA (at 20°C 68°F) Part No. Standard PC Self-clinching board terminal terminal RP1-1.5V RP1-H-1.5V RP1-3V RP1-H-3V RP1-4.5V RP1-H-4.5V RP1-5V RP1-H-5V RP1-6V RP1-H-6V RP1-9V RP1-H-9V RP1-12V RP1-H-12V RP1-24V RP1-H-24V

Nominal voltage, V DC

Pick-up Drop-out voltage, max. voltage, min. V DC V DC

1.5 3 4.5 5 6 9 12 24

1.125 2.25 3.375 3.75 4.5 6.75 9 18

0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4

Coil Nominal operating Nominal resistance, current, operating power, Ω (±10%) mA (±10%) mW 16 64.3 145 178 257 579 1,028 2,133

93.8 46.7 31.1 28 23.3 15.6 11.7 11.3

Maximum. allowable voltage, V DC

140 140 140 140 140 140 140 270

2.25 4.5 6.75 7.5 9 13.5 18 28.8

DIMENSIONS

mm inch Standard PC board terminal 3.75 .148

PC board pattern (Bottom view) 5.08 .200

9 .354

10.6 .417

2.54 .100

4 .157 3.5 .138

7.62 .300 (0.25) (.010) 2.54 .100

0.25 .010

0.5 .020 2.54 .100

7.62 .300

6-1 dia. 6-.039 dia.

Self-clinching terminal 3.75 .148

Tolerance: ±0.1 ±.004 Schematic (Bottom view)

9 .354

10.6 .417

4 .157 3.5 .138 (0.25) (.010) 2.54 .100

0.25 .010

0.5 .020 2.54 .100

1 2 3

−

6 5 4

7.62 .300

Direction indication

General tolerance: ±0.3 ±.012

Deenergized condition

REFERENCE DATA 1. High frequency characteristics Sample: RP1-6V Measuring method: Impedance 50Ω Measuring tool:

6–1.60 dia .063 dia

mm inch

6–1.00 dia .039 dia 26–0.80 dia .031 dia

0.60 .024

18.92 .745

6–2.30 dia .090 dia

PC board • Double-sided through hole • Material: Glass-epoxy resin • t = 1.0mm .039 inch • Copper plated thickness: 35 µm

1.94 .076

18.00 7.62 .709 .300

4.22 9.82 .166 .387

5.08 .200

Soldering SMA connector

• V.S.W.R

• Insertion loss

3.0

• Isolation

100

2.8

2.4 2.2 2.0 1.8 1.6 1.4

N.O. (Terminal Nos. 5-6) N.C. (Terminal Nos. 4-5)

NC (Terminal Nos. 4-5) NO (Terminal Nos. 5-6)

80 Isolation, dB

Insertion loss, dB

V.S.W.R.

2.6

60 50 40 30 20

1.2 1.0

10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Frequency, GHz

0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

Frequency, GHz

RP 2. Coil temperature rise

3. Operate/release time

Sample: RP1-6V; No. of samples: n = 5 Carrying current: 0.1 A Ambient temperature: 25°C 77°F

Sample: RP1-9V; No. of samples: n = 50

• With diode

• Without diode

100

60 50

8 6

40 4

30 20

4 Max. Max. Min. Min.

10 0

100

120

150

70 80

100

120

150

4. Mechanical life

5. Electrical life (0.1 A 30 V DC)

Sample: RP1-5V; No. of samples: n = 8

Sample: RP1-6V; No. of samples: n = 6

• Change of pick-up, drop-out voltage

• Change of pick-up/drop-out voltage

8 6

Pick-up voltage Max. Min. Max. Min.

10 8 6 Pick-up voltage 4

Max.

Min. Max. Min.

100 80 60 40

Max. Min.

Drop-out voltage

Drop-out voltage 100 500 1,000

No. of operations, ×10

120 Contact resistance, mΩ

100 120 150 Coil applied voltage, %V

• Change of contact resistance

12 Pick-up/drop-out voltage, V

Max. Min. Max. Min. 70 80

Coil applied voltage, %V

Pick-up/drop-out voltage, V

Time, ms

70 Time, ms

Temperature rise, °C

Operate time Release time

10 20 No. of operations, ×104

6. Ambient temperature characteristics

7. Contact resistance distribution (initial)

Sample: RP1-6V; No. of samples: n = 5

Sample: RP1-12V; No. of samples: n = 25

10 20 No. of operations, ×104

–40 –20

Drop-out voltage

20 Pick-up voltage 20 40 60 80 Ambient –20 temperature, °C

Quantity

Rate of change, %

–40

22 24 26 28 30 32 34 36 38 40 Contact resistance, mΩ

Sample: RP1-12V; No. of samples: n = 6

OFF

5 Pick-up voltage 0

OFF

–5

OFF

Pick-up voltage 0 –5

Rate of change, %

8.-(3) Influence of adjacent mounting

Sample: RP1-12V; No. of samples: n = 6 Rate of change, %

8.-(2) Influence of adjacent mounting

Rate of change, %

8.-(1) Influence of adjacent mounting Sample: RP1-12V; No. of samples: n = 6

OFF

5 Pick-up voltage 0 –5

5 Drop-out voltage 0

–5

Drop-out voltage 0 ON

–5

Rate of change, %

OFF

Rate of change, %

OFF

5 Drop-out voltage 0 –5

5 10 .197 .394 Inter-relay distance, (mm, inch)

RP 9. High frequency switching test (1.2 GHz, 1 W)

Dummy load (50Ω) WD-2351 Transmission: RF Tranceiver IC-1201 (ICOH)

OFF

120

100

8 6 Pick-up voltage Max. Min.

4 Drop-out voltage

T2 0.2s 1.5s

• Change of contact resistance

12 Contact resistance, mΩ

RP relay Transmission

• Change of pick-up/drop-out voltage Pick-up/drop-out voltage, V

Sample: RP1-6V; No. of samples: n = 6 Ambient temperature: 20°C 68°F

60 40 Max. Min. 20

Max. Min.

0.2s 1.5s

No. of operations, ×104

5 10 No. of operations, ×104

RX (ARX)

RX RELAYS (ARX)

3 GHz SMALL MICROWAVE RELAY

• Insertion loss 20.5 .807

12.4 .488

9.4 .370

• V.S.W.R./ Return loss: 1.2dB or less/ 20.8dB or more 2. High sensitivity • Nominal operating power: 200 mW 3. Small size • Size: 20.5(L) × 12.4(W) × 9.4(H) mm .807(L) × .488(W) × .370(H) inch

mm inch

1. Excellent high frequency characteristics (~2.5GHz, Impedance 50W) • Insertion loss: 0.2 dB or less • Isolation: 60 dB or more

Insertion loss, dB

COM-NC 0.1

0.2 COM-NO 0.3

0.4

0.5 300kHz

1.5GHz

*Also available for unit support (contact us for more details).

2.5GHz3GHz

Frequency

SPECIFICATIONS Contact

Characteristics

Arrangement Contact material Initial contact resistance

Contact rating Rating Contact carrying power Max. switching voltage Max. switching current V.S.W.R. (Return loss) High frequency characteristics Insertion loss (~2.5GHz, Isolation Impedance 50Ω) Input power

Expected life (min. operations)

Mechanical (at 180 cpm) 10mA 24 V DC (resistive load) Electrical 10W 2.5 GHz, Impedance 50Ω, V.S.W.R.&1.2

1 Form C Gold Max. 100 mΩ 10W (2.5 GHz, Impedance 50 Ω, V.S.W.R.&1.2) 10mA 24V DC (resistive load) Max. 20W (at 40°C, V.S.W.R.&1.2, Average) 30 V DC 0.5 A DC Max. 1.2 (Min. 20.8dB) Max. 0.2 dB Min. 60 dB Max. 20W (at 40°C, V.S.W.R.&1.2, Average) 5×106 3×105

• Cellular phone base station (W-CDMA, FPLMTS, IMT-2000, PCS, DCS) • Cellular phone-related measurement devices (SP3T/SP4T switches, etc) • Wireless LAN • Wireless Local Loop

Release time (without diode) [Reset time]*3 Temperature rise (at 20°C)*4 Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive

500 Vrms Max. 10ms (Approx. 6ms) [Max. 10ms (Approx. 5ms)] Max. 6ms (Approx. 3ms) [Max. 10ms (Approx. 5ms)] Max. 60°C Min. 200 m/s2 {20 G} Min. 1,000 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm

Conditions for operation, Ambient transport and storage*8 temp. (Not freezing and condensing at low Humidity temperature)

–40°C to 70°C –40°F to 158°F 5 to 85% R.H. Approx. 5 g .18 oz

Remarks *1 Measurement at same location as “Initial breakdown voltage” section. *2 Detection current: 10mA *3 Nominal operating voltage applied to the coil, excluding contact bounce time. *4 By resistive method, nominal voltage applied to the coil: Contact carrying power: 20W, at 2.5GHz, Impedance 50Ω, V.S.W.R.&1.2 *5 Half-wave pulse of sine wave: 11ms, detection time: 10µs. *6 Half-wave pulse of sine wave: 6ms *7 Detection time: 10µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT

Nominal operating power 200 mW 200 mW 400 mW

TYPICAL APPLICATIONS

Operate time [Set time]*3 (at 20°C)

Min. 100 MΩ (at 500 V DC) 500 Vrms 1,000 Vrms

Unit weight

105

Coil (at 20°C, 68°F) Single side stable 1 coil latching 2 coil latching

Initial insulation resistance*1 Between open contacts Initial Between contact and coil breakdown Between contact and earth voltage*2 terminal

ORDERING INFORMATION Ex.

Product name RX

RX Contact arrangement 1: 1 Form C

0 Operating function 0: Single side stable 1: 1 coil latching 2: 2 coil latching

12 Coil voltage, V DC 03: 3 4H: 4.5 06: 6

09: 9 12: 12 24: 24

RX (ARX) TYPES ANE COIL DATA (at 20°C 68°F) • Single side stable type Part No. ARX1003 ARX104H ARX1006 ARX1009 ARX1012 ARX1024

Pick-up voltage, V DC (max.)(initial) 2.25 3.375 4.5 6.75 9 18

Drop-out voltage, V DC (min.)(initial) 0.3 0.45 0.6 0.9 1.2 2.4

Set voltage, V DC (max.)(initial) 2.25 3.375 4.5 6.75 9 18

Reset voltage, V DC (max.)(initial) 2.25 3.375 4.5 6.75 9 18

Nominal voltage, V DC

Set voltage, V DC (max.)(initial)

Reset voltage, V DC (max.)(initial)

Coil resistance, Ω (±10%)

3 4.5 6 9 12 24

2.25 3.375 4.5 6.75 9 18

22.5 50.6 90 202.5 360 1,440

Nominal voltage, V DC 3 4.5 6 9 12 24

Coil resistance, Ω (±10%) 45 101 180 405 720 2,880

Nominal operating current, mA (±10%) 66.7 44.4 33.3 22.2 16.7 8.3

Nominal operating power, mW 200 200 200 200 200 200

Max. allowable voltage, V DC (at 60°C) 3.3 4.95 6.6 9.9 13.2 26.4

Nominal operating current, mA (±10%) 66.7 44.4 33.3 22.2 16.7 8.3

Nominal operating power, mW 200 200 200 200 200 200

Max. allowable voltage, V DC (at 60°C) 3.3 4.95 6.6 9.9 13.2 26.4

Nominal operating current, mA (±10%) 133.3 88.9 66.7 44.4 33.3 16.7

Nominal operating power, mW 400 400 400 400 400 400

Max. allowable voltage, V DC (at 60°C) 3.3 4.95 6.6 9.9 13.2 26.4

• 1 coil latching type Part No. ARX1103 ARX114H ARX1106 ARX1109 ARX1112 ARX1124

Nominal voltage, V DC 3 4.5 6 9 12 24

Coil resistance, Ω (±10%) 45 101 180 405 720 2,880

• 2 coil latching type Part No. ARX1203 ARX124H ARX1206 ARX1209 ARX1212 ARX1224

DIMENSIONS

mm inch PC board pattern (Bottom view) 20.5 .807

12.4 .488

0.9 dia hole .035 dia hole (2 coil latching type only)

2.54 .100

9.2 .362

7.62 .300

0.2 .008 2.54 .100

2.63 .104

3.0 .118

(2.04) (.080)

7.62 .300

(2.74) (.108)

0.90 .035

2-0.6×0.3 2-.024×.012

0. 45

Tolerance: ±0.1 ±.004 General tolerance: ±0.3 ±.012

Solder to the PC board earth.

Schematic (Bottom view) 7-0.40 to 0.45 dia. 7-.016 to .018 dia.

Single side stable 1

14 13 12 11 10 9 NC

COM

(Deenergized condition)

1 coil latching 1

14 13 12 11 10 9 RESET

2 coil latching

COM

SET

(Reset condition)

14 13 12 11 10 9

RESET

COM

SET

(Reset condition)

RX (ARX) REFERENCE DATA 1. High frequency characteristics Sample: ARX1012 Measuring method: Measured with HP network analyzer (HP8753C). The details for the high frequency characteristics and the measurement procedures and conditions are listed in the RX relay test report. • V.S.W.R. (Return loss)

• Insertion loss

• Isolation

COM-NO

1.2 1.1

0.1

20 Isolation, dB

1.5

Insertion loss, dB

COM-NC

2.0

V.S.W.R.

Return loss, dB

5.0

0.2 COM-NO

40 COM-NC

0.3

0.4

COM-NC 40

50 300kHz

1.5GHz Frequency

2.5GHz 3GHz

0.5 300kHz

1.5GHz

2.5GHz3GHz

Frequency

100 300kHz

COM-NO

1.5GHz Frequency

2.5GHz 3GHz

RX (ARX)

RX RELAYS (ARX)

3 GHz SMALL MICROWAVE RELAY

• Insertion loss 20.5 .807

12.4 .488

9.4 .370

mm inch

1. Excellent high frequency characteristics (~2.5GHz, Impedance 50W) • Insertion loss: 0.2 dB or less • Isolation: 60 dB or more

Insertion loss, dB

COM-NC 0.1

0.2 COM-NO 0.3

0.4

0.5 300kHz

1.5GHz

*Also available for unit support (contact us for more details).

2.5GHz3GHz

Frequency

SPECIFICATIONS Contact

Characteristics

Arrangement Contact material Initial contact resistance

Expected life (min. operations)

Mechanical (at 180 cpm) 10mA 24 V DC (resistive load) Electrical 10W 2.5 GHz, Impedance 50Ω, V.S.W.R.&1.2

• Cellular phone base station (W-CDMA, FPLMTS, IMT-2000, PCS, DCS) • Cellular phone-related measurement devices (SP3T/SP4T switches, etc) • Wireless LAN • Wireless Local Loop

Release time (without diode) [Reset time]*3 Temperature rise (at 20°C)*4 Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive

Conditions for operation, Ambient transport and storage*8 temp. (Not freezing and condensing at low Humidity temperature)

–40°C to 70°C –40°F to 158°F 5 to 85% R.H. Approx. 5 g .18 oz

Nominal operating power 200 mW 200 mW 400 mW

TYPICAL APPLICATIONS

Operate time [Set time]*3 (at 20°C)

Min. 100 MΩ (at 500 V DC) 500 Vrms 1,000 Vrms

Unit weight

105

Coil (at 20°C, 68°F) Single side stable 1 coil latching 2 coil latching

Initial insulation resistance*1 Between open contacts Initial Between contact and coil breakdown Between contact and earth voltage*2 terminal

ORDERING INFORMATION Ex.

Product name RX

RX Contact arrangement 1: 1 Form C

0 Operating function 0: Single side stable 1: 1 coil latching 2: 2 coil latching

12 Coil voltage, V DC 03: 3 4H: 4.5 06: 6

09: 9 12: 12 24: 24

RX (ARX) TYPES ANE COIL DATA (at 20°C 68°F) • Single side stable type Part No. ARX1003 ARX104H ARX1006 ARX1009 ARX1012 ARX1024

Pick-up voltage, V DC (max.)(initial) 2.25 3.375 4.5 6.75 9 18

Drop-out voltage, V DC (min.)(initial) 0.3 0.45 0.6 0.9 1.2 2.4

Set voltage, V DC (max.)(initial) 2.25 3.375 4.5 6.75 9 18

Reset voltage, V DC (max.)(initial) 2.25 3.375 4.5 6.75 9 18

Nominal voltage, V DC

Set voltage, V DC (max.)(initial)

Reset voltage, V DC (max.)(initial)

Coil resistance, Ω (±10%)

3 4.5 6 9 12 24

2.25 3.375 4.5 6.75 9 18

22.5 50.6 90 202.5 360 1,440

Nominal voltage, V DC 3 4.5 6 9 12 24

Coil resistance, Ω (±10%) 45 101 180 405 720 2,880

Nominal operating current, mA (±10%) 66.7 44.4 33.3 22.2 16.7 8.3

Nominal operating power, mW 200 200 200 200 200 200

Max. allowable voltage, V DC (at 60°C) 3.3 4.95 6.6 9.9 13.2 26.4

Nominal operating current, mA (±10%) 66.7 44.4 33.3 22.2 16.7 8.3

Nominal operating power, mW 200 200 200 200 200 200

Max. allowable voltage, V DC (at 60°C) 3.3 4.95 6.6 9.9 13.2 26.4

Nominal operating current, mA (±10%) 133.3 88.9 66.7 44.4 33.3 16.7

Nominal operating power, mW 400 400 400 400 400 400

Max. allowable voltage, V DC (at 60°C) 3.3 4.95 6.6 9.9 13.2 26.4

• 1 coil latching type Part No. ARX1103 ARX114H ARX1106 ARX1109 ARX1112 ARX1124

Nominal voltage, V DC 3 4.5 6 9 12 24

Coil resistance, Ω (±10%) 45 101 180 405 720 2,880

• 2 coil latching type Part No. ARX1203 ARX124H ARX1206 ARX1209 ARX1212 ARX1224

DIMENSIONS

mm inch PC board pattern (Bottom view) 20.5 .807

12.4 .488

0.9 dia hole .035 dia hole (2 coil latching type only)

2.54 .100

9.2 .362

7.62 .300

0.2 .008 2.54 .100

2.63 .104

3.0 .118

(2.04) (.080)

7.62 .300

(2.74) (.108)

0.90 .035

2-0.6×0.3 2-.024×.012

0. 45

Tolerance: ±0.1 ±.004 General tolerance: ±0.3 ±.012

Solder to the PC board earth.

Schematic (Bottom view) 7-0.40 to 0.45 dia. 7-.016 to .018 dia.

Single side stable 1

14 13 12 11 10 9 NC

COM

(Deenergized condition)

1 coil latching 1

14 13 12 11 10 9 RESET

2 coil latching

COM

SET

(Reset condition)

14 13 12 11 10 9

RESET

COM

SET

(Reset condition)

• Insertion loss

• Isolation

COM-NO

1.2 1.1

0.1

20 Isolation, dB

1.5

Insertion loss, dB

COM-NC

2.0

V.S.W.R.

Return loss, dB

5.0

0.2 COM-NO

40 COM-NC

0.3

0.4

COM-NC 40

50 300kHz

1.5GHz Frequency

2.5GHz 3GHz

0.5 300kHz

1.5GHz

2.5GHz3GHz

Frequency

100 300kHz

COM-NO

1.5GHz Frequency

2.5GHz 3GHz