Plymouth by Kostadin Brashnarov

Electrical Insulating Products

1 Consult factory for other sizes. Specification charts located at end of catalog.

Have You Used The BEST of the BEST?

Premium 111 Vinyl Tape Page 2

L969 Plyvolt High Voltage Tape Page 9

GLF® Jacket Repair Wrap Page 22

10 Plyseal Insulating Mastic Page 5

Premium 111Vinyl Tape A 7-mil (0,18mm) all weather, premium grade, pressure sensitive vinyl tape which gives excellent performance over a wide range of temperatures. Cold and weather resistant. Flame retardant. Premium 111 can be used as primary insulation for splices at not more than 600 Volts. Use as protective outer jacket over splices and all low temperature applications. UL 510, CSA 22.2 (rated from -18°C to 105°C), ASTM-D-3005, HH-I-595C.

L969 Plyvolt High Voltage Tape A 30-mil (0,76mm) EPR , self-bonding high voltage tape for insulating and jacketing splices through 69kV. L969 Plyvolt is linerless, and permits quicker application than a tape with liner. Yields a void-free build-up. Excellent corona, ozone and chemical resistance. L969 Plyvolt can also be used for building stress-cones on power cable through 35kV. ASTM-D-4388, HH-I-553C.

GLF® Jacket Repair Wrap Use as a jacket repair or conduit repair when severe conditions tear or puncture the original cable jacket or conduit. Extremely abrasion resistant, with excellent moisture exclusion properties. Approved under 30 CFR 7.404, approval number P-7K-SK-153082-1-MSHA.

10 Plyseal Insulating Mastic A self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 Volts. 10 Plyseal has superior adhesion to metals, cable insulations and jackets with no adverse effect on polymeric conducting shields. For watersealing duct work, cable ends, and all types of splices.

2 Consult factory for other sizes. Specification charts located at end of catalog.

TABLE OF CONTENTS GENERAL PRODUCTS (Contractor/Industrial, Utility, Etc.) Vinyl Plastic Electrical Tapes ................................................................................................ 2 - 3 Friction & Duct Tapes ........................................................................................................... 4 Low Voltage Rubber Tapes .................................................................................................. 5 Insulating Mastics .................................................................................................................. 5 - 6 Low Voltage Splice Kits ....................................................................................................... 7 Plymark® Wire Markers ........................................................................................................ 8 High Voltage Tapes .............................................................................................................. 9 - 10 Special Purpose Products ...................................................................................................... 11 - 12 High Voltage Splice and Termination Kits ........................................................................... 13 - 15

TELECOMMUNICATIONS PRODUCTS Vinyl Plastic Tapes ............................................................................................................... 16 Rubber Tapes ........................................................................................................................ 17 Special Items ......................................................................................................................... 18 Mastics .................................................................................................................................. 19

MINING PRODUCTS Jacketing & Insulating Tapes ............................................................................................... 20 Splicing & Terminating Kits ................................................................................................. 21 - 22 Cable Repair Tapes ............................................................................................................... 23 - 24 Specification Charts .................................................................................................... 25 - 28 Product Comparison Chart ....................................................................................... 29 Packaging Legend:

PP C IB B

= = = =

PLASTIC PACK CELLO INDIVIDUAL BAG BOX

Note: UPC Codes have been added to this edition of the Plymouth Bishop Catalog. The UPC prefix "695298" is then followed by 0 and the four digit Catalog Number. Example: 695298 04472.

LIMITED WARRANTY: Plymouthwarrantsthateachofitsproductswillsubstantiallyconformtothatproduct'swrittenspecificationsexclusivelycontainedinitsPlymouthProductDataSheetforaperiodofone(1)year fromthedateofshipment,(unlessprovidedotherwiseinproduct'sdatasheet). Plymouthmakesorgivesnowarrantytothedistributor,itscustomers,ortheproduct'senduserregardingtheproduct's merchantabilityand/orsuitabilityforhis/itsintendeduseorpurpose,andbuyershallassumeallrisksassociatedtherewith.Providedthattheproductisprovedtobedefectivewithinthetermsdescribed above,andprovidedbuyershallhavefirstcompliedwithallreturnpoliciesofPlymouth,PLYMOUTH'SSOLEOBLIGATIONANDBUYER'SEXCLUSIVEREMEDYUNDERTHIS PRODUCTWARRANTYSHALLBETHROUGHTHEDISTRIBUTOR,TOREPLACESUCHQUANTITYOFTHEPRODUCTASISPROVEDTOBEDEFECTIVEWITHINTHE TIMEPERIODSPECIFIEDABOVE.EXCEPTASEXPRESSLYSETFORTHHEREIN,PLYMOUTHMAKESORGIVESNOOTHERWARRANTIES,EXPRESSORIMPLIED.Inno eventshallPlymouthbeliableforcollateral,consequential,indirectorincidentaldamagesarisingoutof,orconnectedinanywaywiththesupplyofproducts.

RETURN GOODS POLICY: Return of goods for any reason must be authorized by Plymouth's Distributor through Plymouth's Customer Service Department, Insulating Products Division, Plymouth Rubber Company, Inc., Canton, MA 02021. No return will be accepted unless accompanied by a Return Goods Authorization (RGA) Form, obtained through Distributor. All Warranty returns must be made in accordance with the terms of Plymouth's written Limited Warranty. The following terms used in this publication are registered trademarks of Plymouth Rubber Company, Inc.: Plymouth®, Bishop®, Revere®, Plywrap®, Plyduct®, Plyseal®, Plyflex®, Plysafe®, Bi-Seal®, Plyshield®, Plybraid®, Plystrap®, Plyprep®, Plypak®, ColdTerm®, Plycom®, Plytuff®, and GLF®. SpliceWrapTM, Bus-SealTM, PlycastTM, PlyvoltTM, ColdTermTM are trademarks of Plymouth Rubber Company, Inc. Unishield® is a registered trademark of BICC Cables.

Consult factory for other sizes. Specification charts located at end of catalog.

Vinyl Plastic Electrical Tapes PREMIUM 111 A 7-mil (0,18mm) all weather, premium grade, pressure sensitive vinyl tape which gives excellent performance over a wide range of temperatures. Cold and weather resistant. Flame retardant. Premium 111 can be used as primary insulation for splices at not more than 600 Volts. Use as protective outer jacket over splices and all low temperature applications. UL 510, CSA 22.2 (rated from -18°C to 105°C), ASTM-D-3005, HH-I595C. UPC/Cat. 04472 04453 04478 04447

Color grey black grey black

Dimensions 3/4" x .007" x 66' 3/4" x .007" x 66' 3/4" x .007" x 20' 3/4" x .007" x 20'

19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 19mm x 0,18mm x 6m 19mm x 0,18mm x 6m

Pkg 100/case PP 100/case PP 200/case C 200/case C

Weight 24lbs 11kg 24lbs 11kg 27lbs 13kg 27lbs 13kg

PREMIUM 85 CW An 8.5 mil (0,21mm) all-weather, premium grade, pressure sensitive vinyl tape that provides heavier thickness for added mechanical and electrical protection. Cold and weather resistant. Flame retardant. Premium 85 CW can be used as primary insulation for splices at not more than 600 Volts. Excellent protective jacket over all types of splices. Excellent cold weather performance. UL 510, CSA 22.2 (rated from -18°C to 105°C), ASTMD-3005, MIL-I-24391C. UPC/Cat. 04240 04252 04273 04311 04203

Color black black black black black

Dimensions 3/4" x .0085" x 66' 1 1/2" x .0085" x 66' 1 1/2" x .0085" x 108' 2" x .0085" x 66' 3/4" x .0085" x 20'

19mm x 0,21mm x 20m 38mm x 0,21mm x 20m 38mm x 0,21mm x 33m 51mm x 0,21mm x 20m 19mm x 0,21mm x 6m

Pkg 100/case PP 100/case C 50/case C 40/case C 40/case C

Weight 30lbs 14kg 48lbs 22kg 38lbs 17kg 29lbs 13kg 28lbs 13kg

PREMIUM 37 Color Coding A 7 mil (0,18mm) all weather, premium grade, pressure sensitive vinyl tape that is available in nine colors for color coding. Cold and weather resistant. Flame Retardant. Use Premium 37 for quick identification of electrical circuits, containers, and conduit systems, as well as primary insulation for splices at not more than 600 volts. UL 510, CSA 22.2 (rated from -18°C to 105°C), ASTM-D-3005, HH-I-595C. UPC/Cat. 03702 03703 03704 03705 03706 03707 03708 03709 03711 03165 03167 03168 03169 03170 03171 03172 03173 03174 03175

Color green yellow red blue white brown orange grey violet multi-pak* green yellow red blue white brown orange grey violet

Dimensions 3/4" x .007" x 66' 3/4" x .007" x 66' 3/4" x .007" x 66' 3/4" x .007" x 66' 3/4" x .007" x 66' 3/4" x .007" x 66' 3/4" x .007" x 66' 3/4" x .007" x 66' 3/4" x .007" x 66' 1/2" x .007" x 20' 1/2" x .007" x 20' 1/2" x .007" x 20' 1/2" x .007" x 20' 1/2" x .007" x 20' 1/2" x .007" x 20' 1/2" x .007" x 20' 1/2" x .007" x 20' 1/2" x .007" x 20' 1/2" x .007" x 20'

19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 19mm x 0,18mm x 20m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m 12,7mm x 0,18mm x 6m

Pkg 20/case PP 20/case PP 20/case PP 20/case PP 20/case PP 20/case PP 20/case PP 20/case PP 20/case PP 24-6 paks 40/case IB 40/case IB 40/case IB 40/case IB 40/case IB 40/case IB 40/case IB 40/case IB 40/case IB

Weight 5lbs 2kg 5lbs 2kg 5lbs 2kg 5lbs 2kg 5lbs 2kg 5lbs 2kg 5lbs 2kg 5lbs 2kg 5lbs 2kg 8lbs 4kg 3lbs 1kg 3lbs 1kg 3lbs 1kg 3lbs 1kg 3lbs 1kg 3lbs 1kg 3lbs 1kg 3lbs 1kg 3lbs 1kg

* Multi-pak contains one each: red, blue, white, green, yellow, orange

4 Consult factory for other sizes. Specification charts located at end of catalog.

Vinyl Plastic Electrical Tapes

REVERE速 7 A 7-mil (0,18mm) general purpose, weather resistant, pressure sensitive vinyl tape for all kinds of mechanical and electrical applications. Revere 7 is flame retardant and can be used as primary insulation for splices at not more than 600 volts. UL 510, CSA 22.2, MIL-I-7798A. UPC/Cat. 03117

Color black

Dimensions 3/4" x .007" x 66' 19mm x 0,18mm x 20m

Pkg 100/case C

Weight 21lbs 10kg

COLUMBIA A 7-mil (0,18mm) economy grade, pressure sensitive vinyl tape. Columbia tape is flame retardant and weather resistant and can be used as primary insulation at not more than 600 volts. UL 510. UPC/Cat. 03119 03898 03899 03900 03901 03902 03903 03904 03905 03906 03126

Color black green yellow red blue white brown orange grey violet black/10 pack

Dimensions 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60' 3/4" x .007" x 60'

Pkg 100 rolls/case C 2-10 packs/case C 2-10 packs/case C 2-10 packs/case C 2-10 packs/case C 2-10 packs/case C 2-10 packs/case C 2-10 packs/case C 2-10 packs/case C 2-10 packs/case C 10-10 packs/case C

19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m 19mm x 0,18mm x 18m

Weight 19 lbs 7kg 4lbs 2kg 4lbs 2kg 4lbs 2kg 4lbs 2kg 4lbs 2kg 4lbs 2kg 4lbs 2kg 4lbs 2kg 4lbs 2kg 19 lbs 7kg

HD 2 A 10-mil (0,25mm)heavy duty, general purpose, pressure sensitive vinyl tape for all types of mechanical and electrical applications. Additional thickness allows for quicker build-ups and added abrasion protection. HD 2 is flame retardant and can be used as primary insulation for splices at not more than 600 volts. UL 510, CSA 22.2, ASTM-D-2301, MIL-I-7798A. UPC/Cat. 03873* 03874* 03865*

Color black black black

Dimensions 3/4" x .010" x 108' 19mm x 0,25mm x 33m 1" x .010" x 108' 25mm x 0,25mm x 33m 1 1/2" x .010" x 108' 38mm x 0,25mm x 33m

Pkg 100/case C 80/case C 50/case C

Weight 46 lbs 21kg 42 lbs 19kg 38 lbs 17kg

PLYWRAP速 11 (10 mil) and 12 (20 mil) Vinyl Pipewrap A corrosion protection, pressure sensitive vinyl tape giving complete environmental, mechanical and electrical protection for all types of pipewrapping applications. UV, bacteria and fungus resistant, PlyWrap 11 and 12 Pipewrap Tape can be used for both overhead and direct burial applications. Fed. Spec. L-T001512. Printed tapes read: Plymouth Rubber Company Plywrap 10/20. UPC/Cat. 04601 04611 04621 04631

Color black-printed black-unprinted black-printed black-unprinted

Dimensions 2" x .010" x 100' 2" x .010" x 100' 2" x .020" x 100' 2" x .020" x 100'

51mm x 0,25mm x 31m 51mm x 0,25mm x 31m 51mm x 0,51mm x 31m 51mm x 0,51mm x 31m

Pkg 24/case C 24/case C 24/case C 24/case C

Weight 29 lbs 29 lbs 58 lbs 58 lbs

13kg 13kg 26kg 26kg

5 Consult factory for other sizes. Specification charts located at end of catalog.

* Special Order

Friction & Duct Tapes 100 ASTM FRICTION TAPE A high quality cotton fabric coated on both sides with a black rubber adhesive compound which provides good adhesion to all types of surfaces. A 15 mil (0,38mm) general purpose mechanical tape. Provides excellent protection against abrasion. ASTM-D-4514, Comm. Spec. 6747, HHT 101A. UPC/Cat. Pkg 01004 01002 01038 01039 01012 01047 01049

Weight black black black black black black black

3/4" x .015" x 30' 3/4" x .015" x 60' 1 1/2" x .015" x 60' 2" x .015" x 60' 3/4" x .015" x 82.5' 1 1/2" x .015" x 82.5' 2" x .015" x 82.5'

19mm x 0,38mm x 9m 19mm x 0,38mm x 18m 38mm x 0,38mm x 18m 51mm x 0,38mm x 18m 19mm x 0,38mm x 25m 38mm x 0,38mm x 25m 51mm x 0,38mm x 25m

Color

Dimensions

200/case C 100/case C 50/case C 50/case C 100/case C 50/case C 40/case C

34 lbs 29 lbs 29 lbs 32 lbs 44 lbs 41 lbs 45 lbs

15kg 13kg 13kg 15kg 20kg 19kg 21kg

170 BROWN FRICTION TAPE A high quality cotton fabric coated on both sides with a brown rubber adhesive compound which provides good adhesion to all types of surfaces. Distinctive natural rubber color, excellent tack. Provides excellent protection against abrasion for cable and splices. UPC/Cat. 01008 01057 01077 01090

Color brown brown brown brown

Dimensions 3/4" x .0015" x 70' 2" x .015" x 70' 1" x .015" x 70' 1 1/2" x .015" x 70'

19mm x 0,38mm x 21m 51mm x 0,38mm x 21m 25mm x 0,38mm x 21m 38mm x 0,38mm x 21m

Pkg 100/case C 40/case C 80/case C 50/case C

Weight 36 lbs 40 lbs 41 lbs 35 lbs

16kg 18kg 19kg 16kg

PLYDUCT速 48 - All Purpose Cloth Duct Tape An all purpose duct tape that provides excellent adhesion to all types of surfaces. Laminated cloth construction provides superior mechanical strength and will conform to irregular surfaces. Use for sealing joints on all types of duct work. Excellent for heavy duty applications. UPC/Cat. 03150

Color grey

Dimensions 2" x 60 yds. 51mm x 55m

Pkg 24/case C

Weight 38 lbs 17kg

PLYDUCT速 49 - Economy Cloth Duct Tape An economy grade duct tape that provides excellent adhesion to all types of surface. Laminated cloth construction provides mechanical strength and will conform to irregular surfaces. Use for sealing joints on all types of duct work. UPC/Cat. 03149

Color grey

Dimensions 2" x 60 yds. 51mm x 55m

Pkg 24/case C

Weight 32 lbs 15kg

6 Consult factory for other sizes. Specification charts located at end of catalog.

Low Voltage Rubber Tapes

122 RUBBER TAPE Splicing Compound A 30 mil (0,76mm) UL listed, self-amalgamating, low voltage rubber tape which can be used as primary insulation for splices at not more than 600 volts when used in conjunction with a friction or vinyl jacketing tape. UL 510. UPC/Cat. 02002 02020 02004

Color black black black

Dimensions 3/4" x .030" x 22' 19mm x 0,76mm x 6,7m 2" x .030" x 22' 51mm x 0,76mm x 6,7m 3/4" x .030" x 11' 19mm x 0,76mm x 3,3m

Pkg 100/case C 40/case C 200/case C

Weight 34 lbs 15kg 35 lbs 16kg 38 lbs 17kg

150 ASTM RUBBER TAPE A 30-mil (0,76 mm) self-amalgamating, low voltage rubber tape that can be used for insulating cable splices through 2kV, in conjunction with a jacketing tape. Compatible with low and high density polyethylene abd polypropylene PIC cables plus all rubber and PVC cable elements. 150 ASTM conforms easily and self-amalgamates into a homogenous, void-free mass to provide an effective moisture seal. ASTM-D-4388, Communications Industry Specification 6746 UPC/Cat. 02006

Color grey

Dimensions 3/4" x .030" x 30'

19mm x 0,76mm x 9m

Pkg 100/case C

Weight 52 lbs 24kg

125 ELECTRICAL FILLER TAPE A 125 mil (3,2mm) self amalgamating, low voltage insulating compound designed for quick, void-free insulation build-up. 125 can be easily molded by hand to conform to irregular shapes and can be used as primary insulation for splices through 5kV in conjunction with other insulating tapes. 125 is ideal for covering split bolts, padding bus bar edges and connections, and provides an excellent moisture seal. MIL-I-17695A UPC/Cat. 02074

Color black

Dimensions 1 1/2" x .125" x 60" 38mm x 3,2mm x 1,5m

Pkg 10/case B

Weight 35 lbs 16kg

Insulating Mastics 10 PLYSEAL速 Insulating Mastic A self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 Volts. 10 Plyseal has superior adhesion to metals, cable insulations and jackets with no adverse effect on polymeric conducting shields. For watersealing duct work, cable ends, and all types of splices. UPC/Cat. 02626 02627 02628

Form roll pad pad

Dimensions 3 3/4" x .125" x 10' 95mm x 3,2mm x 3m 3 3/4" x .125" x 3 3/4" 95mm x 3,2mm x 95mm 3 3/4" x .125" x 6 1/2" 95mm x 3,2mm x 165mm

Pkg 10/case B 10pads/bx, 10 bxs/case 10pads/bx, 10 bxs/case

Weight 31 lbs 14kg 9 lbs 4kg 17 lbs 8kg

7 Consult factory for other sizes. Specification charts located at end of catalog.

Insulating Mastics (Cont.)

4000 PLYSEAL速-V Vinyl Reinforced Insulating Mastic A vinyl backed, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 1,000 volts. Vinyl backing adds mechanical strength and is UV resistant. UPC/Cat. Pkg 02620 02621 02622

Weight roll pad pad

4" x .133" x 10' 102mm x 3,4mm x 3m 4" x .133" x 4" 102mm x 3,4mm x 102mm 4" x .133" x 6 1/2" 102mm x 3,4mm x 165mm

Form

Dimensions

10/case B 10pads/bx, 10 bxs/case 10pads/bx, 10 bxs/case

34 lbs 15kg 11 lbs 5kg 17 lbs 8kg

5000 BUS SEAL EPR-Backed Insulating Mastic A laminate of W963 Plysafe EPR High Voltage Tape and 10 Plyseal Insulating Mastic in a roll form. A one-pass application of this laminate provides high dielectric strength, instant adhesion and excellent conformability. For insulating and water proofing high voltage bus connectors and conductors. Corrosion protection for junction boxes, bus-duct and cable tray joints. Outer jacket for direct buried high voltage splices. For primary insulation up to 2kV. For bus bar applications, one half lapped layer of 5000 Bus Seal will provide shortage protection up to 15kV and brush protection up to 25kV. UPC/Cat. 08371

Form roll

Dimensions 4" x .155" x 10' 102mm x 3,9mm x 3m

Pkg 10/case B

Weight 36 lbs 16kg

Rubber Mastic (RM) Tapes A self-bonding mastic tape consisting of an ethylene propylene rubber (EPR) backing, bonded to a tacky, temperature stable, electrical grade mastic. Use for insulating and moisture sealing splices and terminations on solid dielectric cable. Can be wrapped, stretched or molded around irregular shapes for insulation build-up, water sealing, and surface protection. Provides excellent electrical properties, superior adhesion, moisture and chemical resistance. For primary insulation up to 2kV. UPC/Cat. 02625 02619

Dimensions 2" x .065" x 10' 51mm x 1,65mm x 3m 1 1/2" x .065" x 10' 38mm x 1,65mm x 3m

Pkg 30/Case B 40/Case IB

Weight 30 lbs 14kg 38 lbs 18kg

Vinyl Mastic (VM) Tapes A self-fusing mastic compound with an all-weather, premium vinyl backing that can be used for insulating and water sealing electrical connections through 600 volts. Small roll sizes can be stretched and molded around irregular shapes, even in tight locations. Provides excellent electrical properties, superior adhesion, and moisture and chemical resistance. Vinyl backing adds UV protection. Use for insulating overhead and direct buried low voltage connections, motor lead connections, and cable and conduit repair. UPC/Cat. 02617 02618 02609

Dimensions 3/4" x .025" x 20" 19mm x 0,635mm x 6m 1 1/2" x .025" x 20' 38mm x 0,635mm x 6m 4" x .050" x 10' 100mm x 1,3mm x 3m

Pkg 80/Case B 40/Case C 10/Case B

Weight 29lbs 13kg 26lbs 11 kg 13lbs 6kg

8 Consult factory for other sizes. Specification charts located at end of catalog.

Voltage Splice Kits KITS LOWLow VOLTAGE SPLICE

PLYFLEX速 Low Voltage Splice Kit For all cable splice requirements up to 1000V, including cable tray and direct burial. Use with compression sleeves or split bolt connections. Insulates, water proofs and mechanically reinforces with simple 3-step technique. Detailed instructions included. One straight or branch splice per kit. Straight splices to 500kCMIL. Branch joints/Wye splices, to 4/0 AWG. Connectors not included. UPC/Cat. 02635

Range up to 500 kCMIL-Straight, up to #4/0 AWG-Wye

Pkg 10 kits/case IB

Weight 6 lbs 3kg

SPLICE WRAPTM One-Step Splice Kit For insulating and waterproofing direct burial or overhead splices and terminations through 2000V. For cable jacket repair and restoration, and ground seal for shielded power cable. Suitable for straight and branch joints. Easy 1-step application. Connectors not included. UPC/Cat. 08909 08910 08911

Range up to #4/0 AWG up to 500 kCMIL up to 1250 kCMIL

Pkg 20/case B 20/case B 20/case B

Weight 5 lbs 2kg 6 lbs 3kg 10 lbs 5kg

PLYCASTTM Epoxy Kit For insulating and waterproofing direct burial or overhead splices up to 5kV. Kit contains rigid mold, epoxy, and tapes which provide a tough, waterproof, dustproof seal. Connectors not included. UPC/Cat. 02638

Type straight

02640

straight

Range up to #2 AWG; connector O.D. up to 13/32" (10mm); cable O.D. to 5/8", (16mm) between #2 AWG and 3/0; conector O.D. up to 5/8" (16mm); cable O.D. to 1", (25mm)

Pkg 10/case B

Weight 8 lbs 4kg

10/case B

14 lbs 6kg

For splicing up to 1000 volts. Kit contains a flexible mold, epoxy, and tapes for a waterproof, dustproof seal. Mold accomodates splitbolt, T's, wyes, taps, and straight splices. Connectors not included. UPC/Cat. 02641

Type multi-tap

02642

multi-tap

Range up to 4/0 AWG - straight; up to 1/0 AWG - wye up to 500kCMIL - straight up to 4/0 AWG - wye

Pkg 10/case B

Weight 18 lbs 8kg

10/case B

18 lbs

8kg

For wye splicing up to 600 volts. Kit contains rigid wye mold, epoxy and tapes which provide a tough, waterproof, dustproof seal. Connectors not included. UPC/Cat. 02636

Type wye

Range connector to 1/0 max split bolt, 2/0 max crimped; cable O.D. main to 13/16" (21mm) max, run to 3/4", (19mm) max

Pkg 10/case B

Weight 14 lbs 6kg

9 Consult factory for other sizes. Specification charts located at end of catalog.

Plymark® Wire Markers

PLYMARK® Wire & Matching Terminal Marker Books A durable, vinyl-impregnated cloth which resists abrasion, moisture, soil and oil. Self adhesive, perforated individual markers. For identification on-site and in-plant. UPC/Cat. 06801 06802 06803 06814

Book Contents 45 each; 0-9 10 each; A-Z, 1-15, + - / 10 each; 1-45 10 each; 46-90

Pkg 5 Books/Case 5 Books/Case 5 Books/Case 5 Books/Case

Weight 1 lb .5kg 1 lb .5kg 1 lb .5kg 1 lb .5kg

PLYMARK® Self Laminating Write-On Wire & Cable Marker Books Individually perforated self-laminating markers. For identification purposes, using write-on numbers, letters or symbols. UPC/Cat. 06816

Book Contents 60 each; 1" x 2 1/2"

Pkg 5 Books/Case

Weight 1 lb .5kg

PLYMARK® Wire Marker Dispensers A modular dispenser which is made up of 10 sections which can be easily expanded. Plymark dispensers snap apart for easy refill. Standard dispensers contain 10-eight foot ( 2,4m) rolls. Additional modules or refill rolls may be added. Strong, mylar marker strips are perforated so no knife is needed. Numbers and letters won't rub off. UPC/Cat. 06850

Description Loaded dispenser 0-9

Pkg 5 Dispensers/Case

Weight 1 lb .5kg

PLYMARK® Wire Marker Dispenser Refill Rolls Easy to replace dispenser refill rolls come packaged 10 eight foot (2,4m) roll/tube. These rolls fit the Plymark Wire Marker Dispenser as well as other standard dispensers. Stain and abraision resistant laminated Mylar rolls are perforated in one inch lengths. No cutting edge needed. UPC/Cat. 06870

Roll Contents 0-9 (1 of each number)

Pkg 5 tubes/box

Weight 1 lb .5kg

10 Consult factory for other sizes. Specification charts located at end of catalog.

High Voltage Tapes

L969 PLYVOLTTM Linerless High Voltage Insulating Tape A 30-mil (0,76mm) EPR , self-bonding high voltage tape for insulating and jacketing splices through 69kV. L969 Plyvolt is linerless, and permits quicker application than a tape with liner. Yields a void-free build-up. Excellent corona, ozone and chemical resistance. L969 Plyvolt can also be used for building stress-cones on power cable through 35kV. ASTM-D-4388, HH-I-553C. UPC/Cat. 02211 02212 02213 02214

Dimensions 3/4" x .030" x 30' 1" x .030" x 30' 1 1/2" x .030" x 30' 2" x .030" x 30'

19mm x 0,76mm x 9m 25mm x 0,76mm x 9m 38mm x 0,76mm x 9m 51mm x 0,76mm x 9m

Pkg 100/case B 80/case B 50/case B 40/case C

Weight 38 lbs 41 lbs 36 lbs 37 lbs

18kg 19kg 16kg 17 kg

Weight 46 lbs 47 lbs 43 lbs 44 lbs

21kg 22kg 20kg 20kg

Weight 44 lbs 45 lbs 40 lbs 41 lbs 53 lbs 54 lbs 52 lbs 53 lbs

20kg 21kg 18kg 19kg 24kg 25kg 24kg 24kg

Weight 44 lbs 46 lbs 41 lbs 44 lbs

20kg 21kg 19kg 20kg

W963 PLYSAFE速 High Voltage Insulating Tape with Liner A 30-mil (0,76mm) EPR, self-amalgamating high voltage tape for insulating and jacketing splices through 69kV. W963 Plysafe amalgamates quickly, yielding a void-free, electrically stable buildup and is ideal for waterproofing. ASTM-D-4388, HH-I-553C/Grade A, MIL-I-3825B. UPC/Cat. 02117 02132 02134 02145

Dimensions 3/4" x .030" x 30' 1" x .030" x 30' 1 1/2" x .030" x 30' 2" x .030" x 30'

19mm x 0,76mm x 9m 25mm x 0,76mm x 9m 38mm x 0,76mm x 9m 51mm x 0,76mm x 9m

Pkg 100/case B 80/case B 50/case B 40/case C

3 BI-SEAL速 High Voltage Insulating Tape with Liner A polyethylene and ethylene propylene rubber based tape possessing superior electrical, chemical, mechanical and thermal properties. Fuses quickly-yielding a void free, electrically stable build-up. For insulating and jacketing of splices on power cable from 600 Volts through 69kV and for building stress cones and jacketing of terminations on power cable from 600 Volts through 35kV. Available in 20 mil (0,51mm)or 30 mil (0,76mm) thickness. ASTM-D-4388, HH-I-553C. UPC/Cat. 08051 08052 08053 08054 08065 08066 08067 08068

Dimensions 3/4" x .020" x 30' 1" x .020" x 30' 1 1/2" x .020" x 30' 2" x .020" x 30' 3/4" x .030" x 30' 1" x .030" x 30' 1 1/2" x .030" x 30' 2" x .030" x 30'

19mm x 0,51mm x 9m 25mm x 0,51mm x 9m 38mm x 0,51mm x 9m 51mm x 0,51mm x 9m 19mm x 0,76mm x 9m 25mm x 0,76mm x 9m 38mm x 0,76mm x 9m 51mm x 0,76mm x 9m

Pkg 100/case B 80/caseB 50/case B 40/case C 100/case B 80/case B 50/case B 40/case C

W962 High Voltage Insulating Tape With Liner 20-mil (0,51mm) EPR based high voltage tape with superior electrical, chemical, mechanical and thermal properties. For insulating and jacketing of splices on power cable from 600 Volts through 138kV and for building stress cones and jacketing of terminations on power cable from 600 Volts through 35kV. W962 is self-amalgamating. ASTM-D-4388. UPC/Cat. 08080 08081 08082 08083

Dimensions 3/4" x .020" x 30' 1" x .020" x 30' 1 1/2" x .020" x 30' 2" x .020" x 30'

19mm x 0,51mm x 9m 25mm x 0,51mm x 9m 38mm x 0,51mm x 9m 51mm x 0,51mm x 9m

Pkg 100/case B 80/case B 50/case B 40/case C

11 Consult factory for other sizes. Specification charts located at end of catalog.

High Voltage Tapes (Cont.) PIB Medium Voltage Tape with Black Liner A self-amalgamating, polyisobutylene-based medium voltage tape that maintains a tight insulation build-up for void-free electrical stability and permanent resistance to moisture penetration. For insulating and jacketing of splices on power cables from 600 volts through 46kV. Plymouth's PIB has excellent stretch capabilities that allow fast taping speeds and is compatible with all extruded dielectrical cable insulations. UPC/Cat. 02038 02039 02051 02092

Dimensions 3/4" x .020 x 33' 1" x .020 x 33' 1 1/2" x .020 x 33' 2" x .020 x 33'

19mm x 0,51 x 10m 25mm x 0,51 x 10m 38mm x 0,51 x 10m 51mm x 0,51 x 10m

Pkg 100/case C 80/case C 50/case C 40/case C

Weight 21 lbs 10kg 50 lbs 23kg 45 lbs 21kg 48 lbs 22kg

17 PLYSHIELD速 EPR Shielding Tape A 30-mil (0,76mm) EPR self-amalgamating, conducting tape for shielding high voltage splices and terminations. Use for rebuilding strand shield and insulation shields on high voltage splices and for shielding all types of connections. ASTM-D-4388. UPC/Cat. 02104

Dimensions 3/4" x .030" x 15' 19mm x 0,76mm x 4,6m

Pkg 50/case B

Weight 13 lbs 6kg

15 PLYBRAID Tinned Copper Shielding Tape A tinned copper mesh-knit shielding with exceptional conformability for replacing metallic shield in shielded cable repair. The two-inch width allows for quicker application and a larger overlap for increased safety in flexible cables. UPC/Cat. 05415 05416 02230

Dimensions 1" x 15' 25mm x 4,6m 1" x 100' 25mm x 30m 2" x 10' 50 mm x 3 m

Pkg 50/case B 10/case B 40 rolls/case

Weight 7 lbs 3kg 9 lbs 4kg 8 lbs 4kg

PLYSTRAP速 Tinned Copper Ground Braid A woven tinned copper braid used for grounding high voltage splices and terminations. Also used for shield continuation on splices. Plystrap has current carrying capacity of #9 AWG solid copper. UPC/Cat. 02711

Dimensions 3/8" x 100' 9mm x 30m

Pkg 1/case B

Weight 4 lbs 2kg

12 Consult factory for other sizes. Specification charts located at end of catalog.

Special Purpose Products

20 PLYSIL® Silicone Rubber Tape A 20 mil (0,51mm) triangular cross-section, self-amalgamating silicone rubber tape used for jacketing high voltage terminations on solid dielectric cable through 69kV. 20 Plysil is track and erosion resistant and can be used as primary insulation for high temperature (180°C) applications. ASTM-D-2148, MIL-I-46852A. UPC/Cat. 03455

Dimensions 1" x .020" x 30' 25mm x 0,51mm x 9m

Pkg 50/case C

Weight 18 lbs 8kg

53 PLYARC® Arc and Fireproofing Tape A 30 mil (0,76mm) unsupported, elastomeric tape that provides excellent flame and arc protection for all types of cables. When exposed to flame, 53 Plyarc will generate a thermally insulating residue for cable protection. Use on cable conduit where added fire protection is required. Unsupported construction offers excellent flexibility and conformability for easy application. UPC/Cat. 03817 03819

Dimensions 1 1/2" x .030" x 20' 38mm x 0,76mm x 6m 3" x .030" x 20' 76mm x 0,76mm x 6m

Pkg 20/case C 10/case C

Weight 12 lbs 5kg 12 lbs 5kg

77 PLYGLAS® Pressure Sensitive Glass Cloth Tape A 7 mil (0,18mm) woven glass fabric tape with a thermosetting rubber based pressure sensitive adhesive used for insulating and protecting high temperature (130°C) connections, such as motor leads and transformer windings. 77 Plyglas has high tensile strength for splice reinforcement and provides excellent tear and abrasion resistance. Use 77 Plyglas to hold down 53 Plyarc and Fireproofing Tape. Comm Spec. 7611, ASTM-D-2754, MIL-I-15126F/GFT. UPC/Cat. 03451 03456 03459

Dimensions 1/2" x .007" x 66' 13mm x 0,18mm x 20m 3/4" x .007" x 66' 19mm x 0,18mm x 20m 1" x .007" x 108' 25mm x 0,18mm x 33m

Pkg 50/case B 50/case B 20/case B

Weight 9 lbs 4kg 12 lbs 5kg 37 lbs 17kg

60 AND 60A Varnished Cambric Tape 60 and 60A Varnished Cambric Tapes are a fine bias (diagonal) weave cotton cloth coated with an electrical insulating varnish which provides good electrical and mechanical protection. V.C. Tapes are available without adhesive (7 mil [0,18mm] thickness), or with adhesive (10 mil [0,25mm] thickness). Both tapes possess good flexibility to allow tight taping of irregular shapes. UPC/Cat. 03919 (with adhesive) 03920 (with adhesive) 03925 (with adhesive) 03921 (without adhesive) 03922 (without adhesive) 03924 (without adhesive)

Dimensions 3/4" x .010" x 60' 1 1/2" x .010" x 108' 1" x .010" x 108' 3/4" x .007" x 60' 1 1/2" x .007" x 108' 1" x .007" x 108'

19mm x 0,254mm x 18m 38mm x 0,254mm x 33m 25mm x 0,254mm x 33m 19mm x 0,18mm x 18,2m 38mm x 0,18mm x 33m 25mm x 0,18mm x 33m

Pkg 40/case B 24/case B 8/case 40/case B 24/case B 6/case

Weight 10 lbs 4kg 18 lbs 9kg 9 lbs 4kg 16 lbs 7kg 4 lbs 2kg

13 Consult factory for other sizes. Specification charts located at end of catalog.

SPECIAL PURPOSE PRODUCTS Special Purpose Products Continued 44 NEOPRENE Jacketing Tape A 30mil (0,76mm) self-amalgamating neoprene tape specially formulated for permanent protection of cables exposed to oil, grease, and other hydrocarbons. 44 Neoprene is chemical, weather, and flame resistant. Use for corrosion protection on lead splicing sleeves. UPC/Cat. 08261 08263 08264

Dimensions 3/4" x .030" x 30' 19mm x 0,76mm x 9m 1 1/2" x .030" x 30' 38mm x 0,76mm x 9m 2" x .030" x 30' 51mm x 0,76mm x 9m

Pkg 100/case C 50/case C 40/case C

Weight 54 lbs 24kg 55 lbs 25kg 57 lbs 26kg

55C Adhesive A fast drying rubber based cement that is used as a bond between cable jacket and jacketing tapes to provide a water proof splice. Also used for bonding between cable insulation and insulating materials. 55C is compatible with all types of polymeric cable insulations and jackets. UPC/Cat. 08422

Contents 4 Ounce 188 ml

Pkg Can, 12/case

Weight 4 lbs 2kg

PLYPREPâ&#x201E;˘ Cable Preparation Kit Plyprep is an effective and environmentally friendly cleaning kit for the proper preparation of both high and low voltage cables prior to splicing or terminating. Very effective for removing grease, oil, tar, and other contaminants from cables. Kits have everything necessary to prepare cables for a splice or termination. Each kit contains 3 tandem-sealed wipes and 1 120 grit nonconducting abrasive cloth. UPC/Cat. 02684

Contents 1 kit/bag

Pkg 10/case

Weight 3 lbs 2kg

MOTOR TERMINAL WRAP Use for terminating 3-core shielded cables when installing motor leads. Each kit contains 3 rolls of a specially formulated Stress-Wrap 1" (25mm) wide coreless rolls. Stress-Wrap is a laminate of EPR High Voltage Insulating Tape and a special voltage gradient stress relieving compound. US Patent #4,187,389. UPC/Cat. 09011 09012 09013

Range 2-25kV/.63" dia. 16,0 mm dia. 2-25kV/.55"-.95" dia. 14,1-24,1 mm dia. 2-25kV/.95"-1.30" dia. 21,6-33,0 mm dia.

Pkg 10/case B 10/case B 10/case B

Weight 7 lbs 3kg 8 lbs 4kg 9 lbs 4kg

14 Consult factory for other sizes. Specification charts located at end of catalog.

Selection Chart for Stress-Wrap Splice

H I G Voltage H V O LSplice T A G&E Termination S P L I C E K Kits ITS High SWS STRESS-WRAPTM Splice Kit

SWS STRESS-WRAP SPLICE KIT Copper Conductors Nominal System Voltage

5kV-8kV GN&UN

XLPE, PE, EPR, RUBBER Conductor Size AWG or kCMIL sq mm

6 AWG 4 AWG 2 AWG 1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kCMIL 300 kCMIL 350 kCMIL 400 kCMIL 500 kCMIL 600 kCMIL 750 kCMIL 800 kCMIL 1000 kCMIL

13 21 34 43 53 67 85 107 127 152 177 203 253 304 380 405 507

Aluminum Conductors

15kV GN&UN*

5kV-8kV GN&UN

15kV GN&UN*

Cable Insulation Type

SWS KIT NO. 02680

02680

02681

02680

For splicing single conductor solid dielectric insulated cable. 5-15kV, #6AWG-1000kcMIL design range. StressWrap technology eliminates the need to pencil cable insulations and allows use of standard non-tapered connectors. Highly reliable splice. Cable preparation dimensions are not critical. Detailed instructions included. Connectors not included. IEEE Standard No.404. U.S. Patent #4,187,389.

02680

02681 02681

02682 02682

UPC/Cat. 02680 02681 02682 02683

Ranges See Chart See Chart See Chart See Chart

Pkg 1 Splice/Kit, 6 Kits/Case 1 Splice/Kit, 6 Kits/Case 1 Splice/Kit, 6 Kits/Case 1 Splice/Kit, 6 Kits/Case

Weight 3 lbs 3 lbs 4 lbs 5 lbs

1kg 1kg 2kg 2kg

* Excludes cables with an insulation wall thickness above 300 Mils.

02682 02682

02683 02683

02683

SWT STRESS-WRAPTM Termination Kit Stress relief of cable insulation shields. For all solid dielectric insulated cable related to 35kV, to 2500kCMIL. Copper and aluminum conductors. Single half-lap applications of StressWrap tape immediately provides stress control and waterproofing. Cable preparation dimensions are not critical. Single kit size fits a wide range of cable sizes. Designed for indoor use, but convertible to outdoor and contaminated area applications when combined with 20 Plysil Tape. Instructions for indoor and outdoor use included. Selection charts indicates optimum kit size and 20 Plysil quantity for outdoor conversions. Full instructions provided.Terminal lugs not included. IEEE Standard No.48. U.S. Patent #4,187,389

Selection Chart for Stress-WrapTM Terminations

UPC/Cat. 02671 02672 02673

Ranges See Chart See Chart See Chart

Pkg 3 Terminations/Kit, 1 Kit/Case 3 Terminations/Kit, 1 Kit/Case 3 Terminations/Kit, 1 Kit/Case

SWT STRESS-WRAP TERMINATION KIT 5kV 8kV UN 15kV UN 35kV GN&UN 15kVGN 28kVGN* GN** 8kV GN XLPE, PE, EPR, RUBBER

02671 02671 02671 02672

02672

02672 02672 02673 02673 02673 02673

20 PLYSIL SILICONE TAPE 5kV 8kV UN 15kV UN 35kV GN&UN 15kV GN 28kV GN* GN** 8kV GN Cable Insulation Type Conductor Size Copper/Aluminum AWG or kCMIL sq mm

SWT KIT NO.

Weight 3 lbs 1kg 4 lbs 2kg 5 lbs 2kg

6 AWG 4 AWG 2 AWG 1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kCMIL 300 kCMIL 350 kCMIL 400 kCMIL 500 kCMIL 600 kCMIL 750 kCMIL 800 kCMIL 1000 kCMIL 1250 kCMIL 1500 kCMIL 1750 kCMIL 2000 kCMIL 2500 kCMIL

13 21 34 43 53 67 85 107 127 152 177 203 253 304 380 405 507 633 760 887 1010 1263

Consult factory for other sizes. Specification charts located at end of catalog.

XLPE, PE, EPR, RUBBER

#ROLLS OF 20 PLYSIL FOR 3 TERMINATIONS

4 3

* Excludes cables with an insulation wall thickness above 300 Mils.

7 6 5 8 7 6

**Excludes cables with an insulation wall thickness above 350 Mils.

4 8 7

TA E S P L I C EKits K I T(Cont.) S VOLT HighHIGH VoltageVOL Splice &G Termination COLDTERMTM Cold Shrink Cable Termination Kits Outdoor/Indoor An anti-tracking, skirted (outdoor only) silicone rubber termination for tape shielded, wire shielded, JCN and Unishield速 cables. Universal kit design fits all extruded dielectric cables. Outdoor models feature unique pull-over tabs for fast and easy installation and superior insulating qualities. Design range covers 5-8kV (3/0 AWG to over 1000kCMIL), 15kV (2 AWG to 5000kCMIL), 2528kV (2/0 AWG to 1250kCMIL) and 35 kV (1/0 AWG to 1000 KCMIL). Meets IEEE Standard No. 48, Class 1. Note: kits do not include terminal lugs. UPC/Cat.

Dimensions

Pkg

Weight

Outdoor 02800 02801 02802 02806 02807

5-15kV, Cable Insulation O.D. Range .637-1.12" 5-28kV, Cable Insulation O.D. Range .84-1.38" 5-15kV, Cable Insulation O.D. Range 1.3-2.1" 5-35kV, Cable Insulation O.D. Range .84-1.38" 5-35kV, Cable Insulation O.D. Range 1.3-2.1"

3 Terminations/Kit, 1 Kit/Case 3 Terminations/Kit, 1 Kit/Case 3 Terminations/Kit, 1 Kit/Case 3 Terminations/Kit, 1 Kit/Case 3 Terminations/Kit, 1 Kit/Case

3 lbs 3 lbs 3 lbs 4 lbs 4 lbs

Indoor 02803 02804 02805

5-15kV, Cable Insulation O.D. Range .637-1.12" 5-28kV, Cable Insulation O.D. Range .84-1.38" 5-15kV, Cable Insulation O.D. Range 1.3-2.1"

3 Terminations/Kit, 1 Kit/Case 3 Terminations/Kit, 1 Kit/Case 3 Terminations/Kit, 1 Kit/Case

3 lbs 1 kg 3 lbs 1 kg 3 lbs 1 kg

Cable Insulation O.D. Range

5 kV 100%

5 kV 133% 8 kV 100%

15 kV 100%

15 kV 133%

.637 - 1.12" 1,62 - 2,84 cm

3/0 AWG to 600 kCMIL 85 sq mm to 304 sq mm

1/0 AWG to 500 kCMIL 53 sq mm to 253 sq mm

2 AWG to 350 kCMIL 34 sq mm to 177 sq mm

4 AWG to 250 kCMIL 21 sq mm to 127 sq mm

2801

0.84 - 1.38" 2,13 - 3,51 cm

350 kCMIL to 1000 kCMIL 177 sq mm to 507 sq mm

250 kCMIL to 750 kCMIL 127 sq mm to 380 sq mm

3/0 AWG to 600 kCMIL 85 sq mm to 304 sq mm

1/0 AWG to 500 kCMIL 53 sq mm to 253 sq mm

2 AWG to 400 kCMIL 34 sq mm to 203 sq mm

2802

1.3 - 2.1" 3,30 - 5,33 cm

Over 1000 kCMIL Over 507 sq mm

750 kCMIL to 2000 kCMIL 380 sq mm to 1013 sq mm

600 kCMIL to 1500 kCMIL 304 sq mm to 760 sq mm

500 kCMIL to 1500 kCMIL 253 sq mm to 760 sq mm

400 kCMIL to 1250 kCMIL 203 sq mm to 633 sq mm

.637 - 1.12" 1,62 - 2,84 cm

3/0 AWG to 600 kCMIL 85 sq mm to 304 sq mm

1/0 AWG to 500 kCMIL 53 sq mm to 253 sq mm

2 AWG to 350 kCMIL 34 sq mm to 177 sq mm

4 AWG to 250 kCMIL 21 sq mm to 127 sq mm

2804

0.84 - 1.38" 2,13 - 3,51 cm

350 kCMIL to 1000 kCMIL 177 sq mm to 507 sq mm

250 kCMIL to 750 kCMIL 127 sq mm to 380 sq mm

3/0 AWG to 600 kCMIL 85 sq mm to 304 sq mm

1/0 AWG to 500 kCMIL 53 sq mm to 253 sq mm

2805

1.3 - 2.1" 3,30 - 5,33 cm

Over 1000 kCMIL Over 507 sq mm

750 kCMIL to 2000 kCMIL 380 sq mm to 1013 sq mm

600 kCMIL to 1500 kCMIL 304 sq mm to 760 sq mm

500 kCMIL to 1500 kCMIL 253 sq mm to 760 sq mm

0.84 - 1.38" 2,13 - 3,51 cm

350 kCMIL to 1000 kCMIL 177 sq mm 507 sq mm

250 kCMIL to 750 kCMIL 127 sq mm 380 sq mm

3/0 AWG to 600 kCMIL 85 sq mm to 304 sq mm

1.32 - 2.1" 3,30 - 5,53 cm

1000 kCMIL to 2500 kCMIL 507 sq mm 1263 sq mm

750 kCMIL to 2000 kCMIL 380 sq mm to 760 sq mm

600 kCMIL to 1500 kCMIL 304 sq mm to 760 sq mm

Cat. No. OUTDOOR 2800

INDOOR 2803

OUTDOOR 2806

2807

1 kg 1 kg 1 kg 2 kg 2 kg

25/28 kV

35 kV 100%

35 kV 133%

N/A

1/0 AWG to 500 kCMIL 53 sq mm to 253 sq mm

2 AWG 400 kCMIL 34 sq mm to 203 sq mm

1/0 AWG to 250 kCMIL 53 sq mm to 127 sq mm

1/0 AWG to 2/0 AWG 53 sq mm to 67 sq mm

500 kCMIL to 1500 kCMIL 253 sq mm to 760 sq mm

400 kCMIL to 1250 kCMIL 203 sq mm to 633 sq mm

250 kCMIL to 1000 kCMIL 127 sq mm to 507 sq mm

2/0 AWG to 1000 kCMIL 67 sq mm to 507 sq mm

16 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL T ASplice G E S&PTermination L I C E K I T SKits VOLT Custom Engineered

PLYPAKTM Custom Engineering Splice & Termination Kits

Plypak is a complete, custom engineered kit designed for a specific splice or termination job. Plymouth can custom design a splice for practically any application from 600 Volts to 138 kV whether itâ&#x20AC;&#x2122;s a standard installation or a one-of-a-kind job. Our custom designed kits include functionally designed materials, and clear, easy to understand instructions. All Plymouth splice and terminations are engineered to meet IEEE 404 and IEEE 48. Typical Plypak applications include PILC joints, transition joints, tee joints, wye joints, armored cable joints, pennant (Plyjoint) joints, pennant (Plyjoint) terminations, Stress Wrap joints, Stress Wrap terminations and reduced length terminations. You supply the job specifications and Plymouth/Bishopâ&#x20AC;&#x2122;s engineering and design staff will generate drawings, installation instructions and bill of materials for your application, pack your custom designed kits and ship them to your job site. For complete information, refer to the Plypak Brochure or call your local representative.

17 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL T A G –EVinyl S P L IPlastic C E K ITapes TS VOLT Telecommunications

PLYCOM® T-818 (G-Vinyl) Designed specifically to meet the exacting requirements of the communications industry. T-818 is fully conformable at 0°F (-18°C) and pulls smoothly from roll at maximum splicing speeds without breaking, yet retains its strength and adhesion at elevated temperatures. Once wrapped T-818 stays down from -40°F to +176°F (-40°C to 80°C). MIL-I-24391C. "G" Vinyl Specification 8726. UPC/Cat. 04290 04292 04317 04318

Dimensions 3/4" x .0085" x 66' 1 1/2" x .0085" x 44' 3/4" x .0085" x 36' 1" x .0085" x 36'

19mm x 0,21mm x 20m 38mm x 0,21mm x 13m 19mm x 0,21mm x 11m 25mm x 0,21mm x 11m

Pkg 100/case C 100/case C 5 rolls/pk, 40-pk/case C 5 rolls/pk, 40-pk/case C

Weight 26 lbs 35 lbs 29 lbs 37 lbs

11kg 16kg 13kg 17kg

PLYWRAP® 11 Vinyl Corrosion Protection Tapes (E Vinyl) A strong physical barrier which is moisture-proof, inert and non-conducting. Used for protecting splice cases, load coil cases, conduit and other areas. Provides atmospheric, galvanic, fungal and bacterial protection. "E" vinyl Specification 8035. UPC/Cat. 04611

Dimensions 2" x .010" x 100' 51mm x 0,25mm x 31m

Pkg 24/case C

Weight 25 lbs 11kg

COLOR CODING TAPES (C Vinyl) For color coding of communication cables. "C" Vinyl Specification 7610. UPC/Cat. 03135

Color Lgt Olive

Dimensions 3/8" x .007" x 45' 9mm x 0,18mm x 14m

Pkg 200/case C

Weight 15 lbs 7kg

18 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL T A G E Sâ&#x20AC;&#x201C; Rubber P L I C ETapes KITS VOLT Telecommunications

COHESIVE RUBBER TAPE (CR) Consists of one soft, uncured layer bonded to a cured, abrasion-resistant layer. Unique separator allows controlled removal at the user's discretion. An airtight, waterproof, gas-tight seal is formed when the uncured layer is bonded to itself. The Industry Standard for temporary splice coverings on communication and control cables. Maintains gas pressure in pressurized cable. Communications Industry Specification 7144. UPC/Cat. 02065 02110

Dimensions 28" x .050" x 20' 714mm x 1,3mm x 6m 36" x .050" x 20' 912mm x 1,3mm x 6m

Pkg 1/Case 1/Case

Weight 16 lbs 7kg 21 lbs 10kg

DOUBLE RUBBER TAPE (DR) Non-adhesive, self-bonding communications tape used for critical sealing and re-jacketing. One layer of uncured compound permanently fused to an abrasion resistant layer of cured rubber. Easy-tear separator. Controlled unwind. Full or half-lapped, a strong bond develops between both plies to maintain gas pressure in pressurized cables. Communications Industry DR Specifications TL-192 and 6863. UPC/Cat. 02011 02013

Dimensions 3/4" x .045" x 15' 19mm x 1,1mm x 4,6m 2" x .045" x 15' 51mm x 1,1mm x 4,4m

Pkg 100/case C 40/case C

Weight 36 lbs 16kg 36 lbs 16kg

Dimensions 3/4" x .030" x 30' 3/4" x .030" x 20' 2" x .030" x 12'

19mm x 0,76mm x 9m 19mm x 0,76mm x 6m 51mm x 0,76mm x 4m

Pkg 100/case C 100/case C 40/case C

Weight 52 lbs 24kg 35 lbs 16kg 22 lbs 10kg

19 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL T A G E S– PSpecial L I C E Items KITS VOLT Telecommunications

100 ASTM FRICTION TAPE Made from first quality sheeting impregnated with a special rubber compound. Superior strength, resistance to abrasion and excellent adhesion on smooth, rough or irregular surfaces. ASTM Friction Tape is an economical, general purpose tape used in a variety of applications such as cover tape over splicing and filler compounds, anchoring tape or splice overwrap, and more. Will not dry out or unravel. Communications Industry Specification 6747. UPC/Cat. 01013 01014 01015 01016 01035

Color Black Black Black Black Grey

Dimensions 3/4" x 36' 19mm x 11m 3/4" x 75' 19mm x 23m 2" x 36' 51mm x 11m 2" x 75' 51mm x 23m 3/4" x 36' 19mm x 11m

Pkg 200/case C 100/case C 60/case C 30/case C 200/case C

Weight 41 lbs 38 lbs 32 lbs 32 lbs 39 lbs

19kg 17kg 15kg 15kg 18kg

RUBBER TIE-CORD Tough rubber compound extruded to 1/8" (3,2mm) diameter and cured to provide high breaking strength and knot stability. Tie-Cord is primarily used to secure CR Tape when making temporary splices and repairs on communications cables. Breaking strength of 27lbs (12kg), (ASTM-D1000). Elongation 450%. UPC/Cat. 08436

Dimensions 1/8" x 50' 3,2mm x 15m

Pkg 100 coils/case

Weight 38 lbs 17kg

77 PLYGLAS® Pressure Sensitive Glass Cloth Tape A dense weave fiberglas fabric, impregnated and coated with a pressure sensitive thermosetting adhesive. Plyglas is heat and flame resistant, non-corrosive and will provide continuous 266°F (130°C) service. The high tensile strength of 77 Plyglas assures the user of long lasting, dependable mechanical reinforcement and thermal protection. 77 Plyglas can be used to hold Arc and Fireproof tape in place on cables or whenever high temperature protection and mechanical strength is needed. Communication Industry Specification 7611, MIL-I-15126F/GFT. UPC/Cat. 03456 03459

Dimensions 3/4" x .007" x 66' 19mm x 0,18mm x 20m 1" x .007" x 108' 25mm x 0,18mm x 33m

Pkg 50/case B 20/case C

Weight 37 lbs 17kg

20 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL T A G E S P –L Mastics ICE KITS VOLT Telecommunications

PLYSEAL®-B All Weather Mastic (B Sealing) Soft, high-tack, conductive butyl rubber compound with exceptional adhesive qualities. Provides a positive seal against moisture and gases. Primarily used to form end seals around telephone cable and splice case terminals. Communications Industry Specification 7601. UPC/Cat. 08375

Dimensions 1 1/2" x .125" x 15' 38mm x 3,2mm x 4,6m

Pkg 25 rolls/case B

Weight 39 lbs 18kg

4000 PLYSEAL®-V Vinyl Mastic (VM) Used for encapsulating and sealing sub-surface and overhead cases and auxiliary sleeves, ducts and cable ends. Excellent for sheath and conduit repairs. Impervious to ozone, fresh water, salt water, and soil chemicals. Vinyl film backing provides mechanical strength and abrasion resistance. Plyseal-V is preferred for cold weather applications; it maintains flexibility and a tight seal even when subjected to extreme flexure. Holds fast and permanently to metal and all types of rubber and synthetic cable elements. UPC/Cat. 02620 02621 02622

Dimensions 4" x .133" x 10' 102mm x 3,4mm x 3m 4" x .133" x 4" 102mm x 3,4mm x 102mm 4" x .133" x 6 1/2" 102mm x 3,4mm x 165mm

Pkg 10 rolls/case B 10 pads/box 10 boxes/case 10 pads/box 10 boxes/case

Weight 34 lbs 15kg 11 lbs 5kg 17 lbs 8kg

10 PLYSEAL® Insulating Mastic A self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 Volts. 10 Plyseal has superior adhesion to metals, cable insulations and jackets with no adverse effect on polymeric conducting shields. For watersealing duct work, cable ends, and all types of splices. UPC/Cat. 02626 02627 02628

Form roll pad pad

Dimensions 3 3/4" x .125" x 10' 95mm x 3,2mm x 3m 3 3/4" x .125" x 3 3/4" 95mm x 3,2mm x 95mm 3 3/4" x .125" x 6 1/2" 95mm x 3,2mm x 165mm

Pkg 10 rolls/case B 10 pads/bx, 10 bxs/case 10 pads/bx, 10 bxs/case

Weight 31 lbs 14kg 9 lbs 4kg 17 lbs 8kg

WATERSEAL MASTIC A self-amalgamating, mechanical grade mastic used for sealing and waterproofing. Excellent adhesion to metals, cable insulations, and jackets. Soft, malleable nature makes Waterseal ideal for molding and conforming to irregular shapes. Use in conjunction with Plymouth's premium tapes for optimum performance. UPC/Cat. 02853 02856 02857

Dimensions 3 3/4" x .125" x 2' 95mm x 3,2mm x 610mm 2 1/2" x .125" x 2' 64mm x 3,2mm x 610mm 3 3/4" x .125" x 5' 95mm x 3,2mm x 5m

Pkg 40 rolls/case IB 40 rolls/case IB 20 rolls/case IB

Weight 27 lbs 12kg 17 lbs 8kg 27 lbs 12kg

21 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL T A G E Sand P L IInsulating C E K I T STapes VOLT Mining Products – Jacketing

PLYTUFF® - F/R PVC Jacketing Tapes PVC tape specifically formulated for flame resistance and abrasion resistance. Use for repairing nicks and tears in all mining cables. 1000 V/mil dielectric strength. Use this tape for primary insulation through 600V. Ideally suited for securing premolded and shrinkable sleeve ends to the cable jacket. Title 30-CFR 18.64, P-153-MSHA Acceptance. UPC/Cat. 03880 03881 03897 03916

Dimensions 3/4" x .007" x 66' 1 1/2" x .007" x 66' 1 1/2" x .007" x 44' 1 1/2" x .010" x 66'

19mm x 0,18mm x 20m 38mm x 0,18mm x 20m 38mm x ,018mm x 13m 38mm x 0,25mm x 20m

Pkg 100/case C 50/case C 50/case C 100/case C

Weight 23 lbs 43 lbs 31 lbs 66 lbs

10kg 20kg 14kg 30kg

Dimensions 2" x .075" x 6' 51mm x 1,3mm x 1,8m 2" x .075" x 8.5' 51mm x 1,3mm x 2,6m

Pkg 30/case C 20/case C

Weight 17 lbs 8kg 16 lbs 7kg

L969 F/R Splice Compound (Linerless) Use to insulate around the connector area on splices from 600V-69kV. Also used to fill in irregularities and to smooth out the splice profile before applying jacketing tape. UPC/Cat. 02221

Dimensions 1 1/2" x .030" x 30' 38mm x 0,76mm x 9m

Pkg 50/case C

Weight 31 lbs 14kg

15 PLYBRAID Tinned Copper Shielding A tinned copper mesh-knit shielding with an exceptional conformability for replacing metallic shield in shielded cable repair. Two-inch width allows for quicker application and a larger overlap for increased safety in flexible cables. UPC/Cat. 02230

Dimensions 2" x 10' 50 mm x 3 m

Pkg 40 rolls/case

Weight 8 lbs 4kg

22 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL T- A G E S&PTerminating L I C E K I T SKits VOLT Mining Products Splice MINE POWER FEEDER SPLICE KIT Use for splicing single and multi-conductor cable found in the mine and prep plant. Kits contain all components to construct an electrically sound splice. The splice utilizes F/R Plyvolt linerless EPR insulating tape , which provides void-free build-ups, high dielectric strength, low electrical loss and a resistance to corona. Emergency overload rating of 130째C. Connectors not included. UPC/Cat. 02566 02567

Ranges 5-8kV, #8-4/0 AWG 5-15kV, #8-4/0 AWG

Pkg 1/case B 1/case B

Weight 5 lbs 2kg 8 lbs 4kg

MINE POWER FEEDER TERMINATION KIT Use for terminating Mine Power Feeder cables through 15kV. Each kit will terminate a 3 core type GGC, shielded power cable common in mining operations. Also, ideally suited for motor lead terminations that are typical to mining and prep plant operations.Each kit contains 3 rolls of StressWrap* voltage gradient material, 3 ground connectors, 3 24" (0,6m) ground ribbons, cleaning solvent and a fine grit cloth. *Stress-Wrap is a laminate of EPR High Voltage Insulating Tape and a special voltage gradient stress relieving compound. Terminal not included. U.S.Patent #4,187,389. UPC/Cat. 02568

Ranges 5-15kV, #8-4/0 AWG

Pkg 6/case B

Weight 12 lbs 5kg

MINE TERMINAL WRAP Use for terminating 3-core shielded cables when installing a coupler. Each kit contains 3 rolls of specially formulated Stress-Wrap. Packaged on 1" (25mm) wide coreless rolls. Stress-Wrap is a laminate of EPR High Voltage InsulatingTape and a special voltage gradient stress relieving compound. U.S. Patent #4,187,389 UPC/Cat. 09011 09012 09013

Ranges 2-25kV/.63" dia. 16,0mm dia. 2-25kV/.55"-.95" dia. 14. 1-24,1mm dia. 2-25kV/.95"- 1.30" dia. 21,6-33,0mm dia.

Pkg 20/case B 20/case B 20/case B

Weight 7 lbs 3kg 8 lbs 4kg 9 lbs 4kg

PTCS Trailing Cable Splice Kit Use to construct a full or partial splice in single or multi-conductor portable mining cable of type W, G, or GGC construction and rated 600V/2kV. Also can be used for conduit repair and to repair damaged cable jackets. Connectors not included. Title 30-CFR 18.64 P-153-MSHA Acceptance. UPC/Cat. 02583 02586 02576** 02579** 02565***

Ranges 6c-4/0-AWG-GGC 4c-2/0-AWG-GGC 2c-#1-AWG-GGC 4c-4/0-AWG-GGC 3c-4/0-AWG-GGC

Pkg 10/case 15/case 10/case 10/case 10/case

PB PB PB PB PB

Weight 29 lbs 29 lbs 20 lbs 35 lbs 44 lbs

13kg 13kg 9kg 16kg 20kg

**Extended length splice; ***Shielded cable splice

23 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL T- A G E S&PTerminating L I C E K I T SKits VOLT Mining Products Splice GLF® Trailing Cable Splices Use to construct a full or partial splice in single or multi-conductor portable mining cable. Four kits cover the entire range of splicing needs from 600 Volt to 5kV, up to 500 KCM (connectors not included). All GLF Splice Kits meet the technical requirements set forth in 30 CFR § 7.404. Approval number P-7K-SK-153082-1-MSHA. UPC/Cat.

Ranges

Pkg

Weight

Unshielded 02561 02562

4c-4/0-AWG, up to 600 V 3c-#2-AWG, up to 600 V

10/case IB 10/case IB

10 lbs 5kg 12 lbs 5.5kg

Shielded 02569 02570*

3/C 500 KCM Max. up to 995 V max 3/C 500 KCM Max. up to 5kV max

10/case IB 1/case IB

25 lbs 12kg 8 lbs 4kg

The unique formulation and design of the GLF Jacket Wrap provides approximately 100 times the resistance to abrasion and tearing over the splice area, in comparison to PVC tape jackets. The GLF Jacket Wrap has similar abrasion resistance to molded sleeves, but allows for major repairs to cable without cutting all conductors * suitable for longwall applications.

® GLF

Splice Kits

Make Major Repairs to Individual Conductors on 2400 Volt Cable Without Cutting Conductors! 4 kits cover the entire range of cable splicing needs from 600 volt to 5000 volt shielded and non-shielded trailing cables. #2561: For splicing or repairing unshielded trailing cables rated up to 600 volt, from #6 AWG to 4/0 AWG. #2562: For splicing or repairing unshielded trailing cables rated up to 600 volt, from #6 AWG to #2 AWG.

#2569: For splicing or repairing shielded trailing cables rated up to 995 volt, from #6 AWG to 500 KCM. #2570: For splicing or repairing shielded trailing cables rated up to 5kV, from #6 AWG to 500 KCM. Suitable for longwall applications.

Meets requirements set forth by new MSHA Part 7 • MSHA approval number P-7K-SK-153082-1-MSHA

24 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL TA G E S PRepair L I C E Tapes KITS VOLT Mining Products - Cable NEOPRENE VULCANIZABLE JACKETING COMPOUND A vulcanizable neoprene compound that flows easily within range of mold temperatures from 260°F - 330°F (127°C - 166°C). Bonds readily to all types of neoprene jacket compounds. Chemically bonds to the original jacket without the need of a bonding agent. Provides a waterproof covering with outstanding resistance to oil and abrasion. Quick-cure system greatly reduces mold time. Title 30-CFR 18.64 P-153-MSHA Acceptance. UPC/Cat. 02153 02193

Color Black Black

Dimensions 2" x .080" x 10' 51mm x 2,3mm x 3m 1 1/2" x .030" x 30' 38mm x 0,76mm x 9m

Pkg 40/case C 50/case C

Weight 44 lbs 20kg 56 lbs 25kg

HYPALON VULCANIZABLE JACKETING COMPOUND A vulcanizable hypalon compound that flows easily within range of mold temperatures from 260°F - 330°F (127°C - 166°C). Bonds readily to neoprene , hypalon, PVC and NBR-PVC jackets. Chemically bonds to the original jacket without the need of a bonding agent. Provides a waterproof covering with outstanding resistance to ozone, oil and abrasion. Quick-cure system greatly reduces mold time. Title 30-CFR 18.64 P-153-MSHA Acceptance. UPC/Cat. 02048 02049 02050

Color orange black yellow

Dimensions 1 1/2" x .030" x 30' 38mm x 0,76mm x 9m 1 1/2" x .030" x 30' 38mm x 0,76mm x 9m 1 1/2" x .030" x 30' 38mm x 0,76mm x 9m

Pkg 50/case C 50/case C 50/case C

Weight 51 lbs 23kg 51 lbs 23kg 51 lbs 23kg

NYLON REINFORCED NEOPRENE JACKETING COMPOUND A laminate of vulcanizable neoprene and an open weave of high strength, fire resistant nylon used to restore the splice area in the cable to nearly its original strength. Title 30-CFR 18.64 P-153-MSHA Acceptance. UPC/Cat. 02246

Dimensions 1" x .030" x 30' 25mm x 0,76mm x 9m

Pkg 80/case C

Weight 53 lbs 24kg

VULCANIZABLE INSULATING COMPOUND A rubber compound used for restoring cable insulation. It is compatable with all solid dielectric insulations. It chemically bonds without the need of a bonding agent. Insulating value rated through 15kV. Consult the factory for higher voltages. UPC/Cat. 02166

Color orange

Dimensions 1" x .030" x 30' 25mm x 0,76mm x 9m

Pkg 80/case C

Weight 49 lbs 22kg

25 Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOL TA G E S PRepair L I C E Tapes KITS VOLT Mining Products - Cable

VULCANIZABLE BARRIER COMPOUND A rubber barrier compound which is needed to retain the symmetry of the joints during the vulcanizing process. Compatable with all insulating compounds and chemically bonds without the need of a bonding agent. Insulating value rated through 15kV. Consult the factory for higher voltages. UPC/Cat. 02167

Color grey

Dimensions 1" x .030" x 30' 25mm x 0,76mm x 9m

Pkg 80/case C

Weight 49 lbs 22kg

CLOTH SEMI-CONDUCTING TAPE A cloth semiconducting tape used to replace factory semiconductor tape in vulcanized joints. High conductivity provides excellent shielding, cloth construction adds to strength of joint. Compatible with all solid dielectric insulations as well as Plymouth's vulcanizing tapes. UPC/Cat. 02164 02165

Dimensions 1" x 20' 25mm x 6m 1" x 100' 25mm x 30m

Pkg 20/case 10/case

Weight 3 lbs 1 kg 6 lbs 3 kg

Serving the mining industry for over 80 years. For more information or for custom solutions to your insulating needs, contact your local distributor. 26 Consult factory for other sizes. Specification charts located at end of catalog.

SPECIFICATION CHARTS Consult factory for other sizes. Specification charts located at end of catalog.

VINYL PLASTIC ELECTRICAL TAPES PROPERTY

PREM. 111

PREM. 85

PREM. 37

REVERE 7

COLUMBIA

HD2

VALUE

0.0085 0,216 20 9,0 200 20 0,21 20 0,21

0.007 0,178 18 8.2 200 20 0,21 20 0,21

0.007 0.178 18 8,2 175 18 0,19 18 0,19

50 0,54 113 12,4 4 max NA 0.10 max 2,50

50 0,54 100 11,0 4 max NA 0.10 max 2,50

80 105 -10 -18

11,000 50,9 10,000 46,3

PHYSICAL Thickness

0.007 0,178 Tensile Strength 18 8,2 Elongation 240 Adhesion to Steel 20 0,21 Adhesion to Backing 2 0 0,21 Adhesion to Backing @ -7°C 50 0,54 Unwind @ -7°C 100 11,0 Flammabilty 4 max Flame Resistance NA Flagging 0.10 max 2,50 Temperature Rating Maximum 80 105 Minimum -10 -18 ELECTRICAL Dielectric Strength Standard Wet

10,000 56,1 9,000 50,5

PLYTUFF

VALUE

PLYWRAP PLYWRAP 11 12 VALUE VALUE

0.007 0,178 16 7,3 125 17 0,18 17 0,18

0.010 0,254 26 11,8 200 18 0,19 18 0,19

0.010 0,254 23 10,5 200 22 0,23 18 0,19

0.020 0,508 50 22,7 200 21 0,22 19 0,20

NA NA NA NA 4 max NA 0.10 max 2,50

NA NA NA NA 4 max NA NA

80 105 -10 -18

80 105 -10 0

80 NA -10 NA

80 105 -10 0

7,000 39,3 6,300 35,3

10,000 39,3 9,000 35,4

Data in table represent average test results and are not to be used for specification purposes. The product user should make his/her own tests to determine the product's suitability for the intended use, and shall assume all risk and liability in connection therewith. For more information, see Plymouth's Limited Warranty on page 1.

UNIT

REFERENCE

0.007 0,178 17 7,7 150 22 0,23 22 0,23

inch mm lb/in kg/25mm % oz/in Kn/m oz/in Kn/m

ASTM-D-1000

NA NA NA NA 4 max NA NA

NA NA NA NA NA Pass 0.10 max. 2,50

oz/in Kn/m oz/in N/cm second inch mm

ASTM-D-1000

NA NA NA NA

°C °C °C °C

UL-510 CSA-22.2 UL-510 CSA-22.2

10,000 39,3 NA NA

18,000 35,4 NA NA

10,000 39,3 5,400 35,3

volts kV/mm volts kV/mm

ASTM-D-1000

VALUE

ASTM-D-1000 ASTM-D-1000 ASTM-D-1000 ASTM-D-1000

ASTM-D-1000 ASTM-D-1000 30-CFR 18.64 ASTM-D-1000

ASTM-D-1000

SPECIFICATION CHARTS

CLOTH & SPECIALTY TAPES PROPERTY PHYSICAL Thickness Tensile Strength Elongation Adhesion to Steel

100 FRICTION PLYDUCT 48 PLYDUCT 49 60 V.C. 60-A V.C. 77 PLYGLAS VALUE VALUE VALUE VALUE VALUE VALUE

44 NEOPRENE VALUE

20 PLYSIL VALUE

UNIT

REFERENCE

0.015 0,381 40 18,2 NA

0.010 0,254 24 11,0 20

0.008 0,254 22 10,0 18

0.007 0,178 40 18,2 50

0.010 0,254 40 18,2 50

0.007 0,178 170 77,3 5

0.030 0.762 450 (psi) 3,1 (MPA) 450

0.020 (peak) 0.508 10 4,5 400

inch mm lb/in kg/25mm %

ASTM-D-1000

NA NA

36 0,40

NA NA

16 0,18

50 0,56

NA NA

oz/in Kn/m

ASTM-D-1000

12 300 12 300

NA NA NA NA

in/min mm/min in/min mm/min

ASTM-D-69

7,000

10,000

2,500

450 (V/mil)

600 (V/mil)

volts

ASTM-D-1000 ASTM-D-1000

Adhesion Standard Oven Test

ELECTRICAL Dielectric Strength 1,200

ASTM-D-69

ASTM-D-1000

Consult factory for other sizes. Specification charts located at end of catalog.

INSULATING MASTICS & LOW VOLTAGE RUBBER TAPES 10 PLYSEAL VALUE

4000 PLYSEAL VALUE

5000 BUSSEAL VALUE

RM TAPE VALUE

VM TAPE VALUE

122 RUBBER VALUE

150 RUBBER VALUE

125 FILLER VALUE

UNIT

REFERENCE

0.133 3,28 NA

0.155 3,94 NA

0.065 1,65 NA

0.025 0,635 NA

0.030 0,762 250

0.125 3,170 NA

inch mm psi

ASTM-D-4325

Tensile Strength

0.125 3,17 NA

Elongation Fusion

NA NA 5/64 max

1,72 300 5/64 max

1,38 1000 5/64 max

% inch

ASTM-D-4325 ASTM-D-4325

2,0 130°C

2,0 95°C

mm Visual

ASTM-D-4325

90 130

80 130

80 95

°C 95

ASTM-D-4388 °C ASTM-D-4388

500 19,5

600 26

500 19,5

350 13,7

585 23,0

V/mil kV/mm

ASTM-D-4325

PROPERTY PHYSICAL Thickness

2,0 Heat Resistance 130°C OperatingTemperature Continuous 90 Emergency Overload ELECTRICAL Dielectric Strength

500 19,5

ASTM-D-4325

SPECIFICATION CHARTS Consult factory for other sizes. Specification charts located at end of catalog.

HIGH VOLTAGE RUBBER TAPES PROPERTY PHYSICAL Thickness Tensile Strength Elongation Fusion Heat Resistance OperatingTemperature Continuous Emergency Overload ELECTRICAL Dielectric Strength

L969 PLYVOLT

W963 PLYSAFE

3 BI-SEAL 20

3 BI-SEAL 30

W962 EPR

17 PLYSHIELD

VALUE

UNIT

REFERENCE

0.030 0,762 400 2,76 760 5/64 max 2,0 130

0.030 0.762 350 2.41 750 5/64 max 2.0 130

0.020 0,508 450 3,10 860 5/64 max 2,0 130

0.030 0,762 450 3,10 860 5/64 max 2,0 130

0.020 0,508 450 3,10 920 5/64 max 2,0 130

0.030 0,762 225 1,5 500 5/64 max 2,0 NA

inch mm psi MPA % inch mm °C

ASTM-D-4325 ASTM-D-4325 ASTM-D-4325

90 130

°C °C

ASTM-D-4388 ASTM-D-4388

780 30,0

750 29.0

900 35,0

950 37,0

V/mil kV/mm

ASTM-D-4325

2,7 2.9

2.6 2.7

NA NA

ASTM-D-4325 ASTM-D-4325

ASTM-D-4325 ASTM-D-4325 ASTM-D-4325

Dielectric Constant 24h @ 23°C 168h @ 70°C Dissipation Factor 24h @ 23°C 168h @ 70°C Volume Resistivity 96h @ 23°C, 50% RH 96h @ 23°C, 96% RH 168h @ 90°C

0.005 0.015

0.003 0.008

0.001 0.005

NA NA

10 16 10 15 NA

1016 1015 NA

870 NA 1 x 104

ohm-cm ASTM-D-4325 ohm-cm ASTM-D-4325 ohm-cm ASTM-D-4325

CHEMICAL Ozone Resistance UV Resistance

Pass Pass

NA Pass

Visual Visual

ASTM-D-4325 ASTM-D-4325

SPECIFICATION CHARTS

CABLE REPAIR TAPES

PROPERTY

PHYSICAL Thickness Tensile Strength Elongation Tear Resistance Hardness Abrasion Resistance

Consult factory for other sizes. Specification charts located at end of catalog.

ELECTRICAL Dielectric Strength Flammability

NEOPRENE COMPOUND VALUE

HYPALON COMPOUND VALUE

REINFORCED NEOPRENE VALUE

INSULATING COMPOUND VALUE

BARRIER COMPOUND VALUE

UNIT

REFERENCE

0.030, 0.080 0.762, 2,3 1700 11,7 500 220 38,7

0.030 0,762 2000 13,8 500 150 26,0

0.030 0,762 2400 16,5 40 NA NA

0.030 0,762 1,000 6,9 400 NA NA

0.030 0,762 1,200 8,3 300 NA NA

inch mm psi MPA % lbs/in Kn/m

ASTM-D-1373

70 68

65 65

NA NA

Duro Index

ASTM-D-2240 NBS

450 17,5

500 19,5

NA NA

700 27,5

V/mil kV/mm

ASTM-D-149

Passed

ASTM-D-412 ASTM-D-412 ASTM-D-624

30 CFR 18.64

Plymouth/Bishop Product Comparison Plymouth/Bishop Product

Representative Page Cat.No. Number

3M Product

VINYL PLASTIC ELECTRICAL TAPES

Premium 111 Grey Premium 111 Black Premium 85CW Premium 37 Colors Revere® 7 Columbia HD2 PlyWrap® 11 Vinyl Pipewrap PlyWrap® 12 Vinyl Pipewrap Plycom T818 Plytuff Printed Mining

4472 4453 4240 3702-3711 3117 3119 3873 4611 4631 4318 3880

2 2 2 2 3 3 3 3 3 16 20

Super 33+ Super 88 35 Highland Temflex 1700 22 50 51 88T 1700P

LOW VOLTAGE RUBBER TAPES

100 ASTM Friction 170 Brown Friction 122 Rubber Tape 150 ASTM Rubber 125 Filler Tape

1002 1008 2002 2006 2074

4 4 5 5 5

1755 2150 Scotchfill

WIRE MARKER PRODUCTS

Plymark® Book Plymark® Write-On Books Plymark® Dispensers Plymark® Rolls

6801-6814 6816 6850 6870

8 8 8 8

SEB Series STD 0-9 SER Series

INSULATING MASTICS

10 Plyseal® (Rolls & Pads) 4000 Plyseal®-V (Rolls & Pads) 5000 Bus Seal RM Tape VM Tape

2626-2628 2620-2622 8371 2625, 2619 2617, 2618, 2609

5 5 5 5 5

2229 2200-2210 2228 2210

LOW VOLTAGE SPLICE KITS

Plyflex® Splice Wrap Plycast - Straight Plycast - Wye Plycast - Multi-tap

2635 8909-8911 2638 2636 2641

7 7 7 7 7

82 Series 90 Series 85 Series

HIGHVOLTAGE& SHIELDING TAPES

L969 Plyvolt Linerless W963 Plysafe® W962 EPR Bi-Seal®

9 9 9 9

130C 23 -

17 Plyshield® 15 Plybraid® Plystrap®

2211 2117 8080 8051-8054 8065-8068 2104 5415 2711

10 10 10

13 24 25

Plyduct® 48 & 49 20 Plysil® 53 Plyarc® 77 Plyglas® 44 Neoprene 60-A Varnished Cambric 60 Varnished Cambric PlyprepTM Cable Prep Kit

3150-3149 3455 3819 3456 8261 3919 3921 2684

4 11 11 11 12 11 11 12

3939 70 77 27 2520 2510 CC-2

SWS Stress-Wrap Plypak Custom Kits

2680 Custom

13 13

ColdTermTM Outdoor/Indoor SWT Stress-Wrap

2800-2807 2671

15 14

SPECIAL PURPOSE PRODUCTS

HIGH VOLTAGE TERMINATION & SPLICE KITS

Quick Term Series 5701-03

31 Consult factory for other sizes. Specification charts located at end of catalog.

For 105 Years, Our Products Have Been New and Improved New

Announcing the New and Improved Premium 111 – The Best Presure Sensitive Vinyl Tape Available

1940 1960

1970

1950

1980

2000

Plymouth/Bishop is the electrical products division of Plymouth Rubber Company, Inc., which was founded in 1896 in Canton, Massachusetts. Throughout the years, Plymouth has been increasing its technical and manufacturing capabilities. In the 1980s the tape division acquired Bishop Electric Company and added the electrical tape lines of American Biltrite. Today, Plymouth/Bishop presents the most complete line of electrical tape products in the world. Customers such as electrical contractors, industrial plants, utilities, mines and telecommunication companies count on us to consistantly deliver the highest quality tapes at competitive prices. With our vast experience, high standards, and espansive product line, Plymouth/ Bishop is uniquely qualified to meet your job requirements. Plymouth Rubber Company Company,, Inc. • Canton, Massachusetts 02021 • Telephone: (781) 828-0220 • Fax: (781) 828-6041 32 www .plymouthbishop.com • info@plymouthrubber .com www.plymouthbishop.com info@plymouthrubber.com Consult factory for other sizes. Specification charts located at end of catalog.