NetEnrich Rel 1.6 A3000 Quick Start Guide

NetEnrich Rel 1.6 - A3000 Quick Start Guide for Installation & Use of NetEnrich Products in a Simple Workgroup Setting in a LAN Environment

January 2006

-1-

M PL E

Items Provided by NetEnrich NetEnrich VPM Gateway™ A3000 appliance with power supply cable

NetEnrich VPM Hard Controllers

SA

Cables for NetEnrich VPM Hard Controllers

AC Adapter for NetEnrich VPM Hard Controllers

January 2006

-2-

M PL E

Other Items You Will Need for Installation [Optional] Multi-port Power-overEthernet (PoE) switch - IEEE 802.3af compliant

Adapters to convert from RJ45 to DB9

Multi-port Ethernet switch (may not be needed if you have PoE switch)

Back

Remote Power Control strips (optional) – with Serial port or Network control

SA

CAT5 cables – RJ45 – for Ethernet connection

Front

Physical access to ports of target devices that you want to manage with NetEnrich such as a Windows Server (e.g. Keyboard, Video, Mouse, USB, Serial ports)

Physical access to ports of target devices that you want to manage with NetEnrich such as a Network Switch (e.g. Serial Console port)

January 2006

-3-

M PL E

Other Items That Must Already Exist In Your Network

SA

[Optional] Firewall or DMZ that connects to the external Internet

January 2006

-4-

M PL E

Network Topology for a Simple Workgroup Scenario to Deploy NetEnrich Remote Administrator

Target Device: KVM on Windows Server Power

NetEnrich Cable

NetEnrich VPM Hard Controller

Remote Control Power Strip (Control via Network)

NetEnrich Cable

Internet/ Internet/ WAN WAN

NetEnrich A3000 Appliance

Firewall/ DMZ

Controller/ Management Network 1

PoE Switch

External Network 0

(if all NetEnrich VPM Hard Controllers are powered using AC adapters, then a regular Ethernet switch may also be substituted here)

SA

NetEnrich VPM Hard Controller

KSKS KSKS SKSK

Target Device: Serial Console on Network Switch

January 2006

-5-

Physical Installation Steps

•

Step 1: Place the NetEnrich appliance on a rack or on a flat surface. Place the other accessories either on a rack or on a flat surface in physical proximity to each other Step 2a: Identify and organize the networks for the NetEnrich system. The NetEnrich appliance A3000 supports two networks. Each appliance therefore has two network ports: A. The first network port (eth0) hooks up to the External Network 0 – also called the User Access network or External WAN network and typically connects to the public Internet via a firewall or DMZ. B. The second network port (eth1) hooks up to the Controller/Management Network 1 – this is the network where all the NetEnrich VPM Hard Controllers reside.

M PL E

•

External Network 0

Controller Network 1

SA

NetEnrich Appliance - Back Side

January 2006

-6-

Step 2b: Gather the following info using the worksheet below for both

M PL E

networks so that you can configure it at a later time via the serial console menu of the NetEnrich appliance: NetEnrich VPM Gatewayâ&#x201E;˘ A3000 Configuration Worksheet Default Value

New Value

WAN External Network (eth0): Hostname:

nems-a3000

Domain Name:

netenrich.com

IP Address:

172.21.11.51

Netmask:

255.255.0.0

Gateway:

172.21.0.1

Primary DNS Server:

206.13.28.12

Secondary DNS Server:

206.13.31.12

SA

LAN Management and Controller Network (eth1): IP Address:

192.168.11.51

Netmask:

255.255.255.0

January 2006

-7-

M PL E

Step 3A: Connecting NetEnrich VPM Hard Controller to KVM of Target Windows Server and to the Controller/Management Network 1 Power

Remote Control Power Strip (Control via Network)

NetEnrich Cable

PoE Switch

Controller/ Management Network 1

NetEnrich VPM Hard Controller - Back

SA

Target Device: KVM on Windows Server

NetEnrich VPM Hard Controller - Front

January 2006

-8-

M PL E

Step 3B: Connecting NetEnrich VPM Hard Controller to Serial Console of Target Network Switch and to the Controller/Management Network 1 AC Adapter

Target Device: Serial Console on Network Switch

NetEnrich Cable

Wall Power Outlet

(Use AC Adapter if not using a PoE switch to power the NetEnrich VPM Hard Controller)

Ethernet Switch

Front

Controller/ Management Network 1

Back

SA

Adapter to convert from RJ45 to DB9

NetEnrich VPM Hard Controller - Back

January 2006

NetEnrich VPM Hard Controller - Front

-9-

Step 3B: (contd.) Serial Console Pin Mappings

M PL E

NetEnrich Controller - Serial-1 Cable (RJ-45) Pin-Outs NetEnrich Serial-1 Cable UART Signal Function (RJ-45) Pin-Out 1 CTS Clear To Send 2 DSR Data Set Ready 3 RD Received Data 4 SG Signal Ground 5 DCD Data Carrier Detect 6 TD Transmitted Data 7 DTR Data Terminal Ready 8 RTS Request To Send

Front

Back

NetEnrich Controller - Serial-2 Cable (RJ-45) Pin-Outs NetEnrich Serial-1 Cable UART Signal Function (RJ-45) Pin-Out 3 RD Received Data 4 SG Signal Ground 6 TD Transmitted Data

SA

DTE Adapter Wiring and Pin-Ins for target DTE devices (e.g. Computers, Terminals) that conform to the Yost Serial Device Wiring Standard Target DTE Device Pin-In Alternatives Signal Function RJ-45 Pin-In DB9 Pin-In DB25 Pin-In Pin Color CTS Clear To Send 8 5 1 Blue DCD Data Carrier Detect 1 8 2 Orange RD Received Data 2 3 3 Black SG Signal Ground 5 7 4 Red SG Signal Ground 5 7 5 Green TD Transmitted Data 3 2 6 Yellow DTR Data Terminal Ready 4 20 7 Brown RTS Request To Send 7 4 8 White DSR Data Set Ready 6 6 RI Ring Indicator 9 22 -

January 2006

DCE Adapter Wiring and Pin-Ins for target DCE devices (e.g. Modems, Printers) that conform to the Yost Serial Device Wiring Standard Target DCE Device Pin-In Alternatives Signal Function RJ-45 Pin-In DB9 Pin-In DB25 Pin-In Pin Color CTS Clear To Send 8 5 8 White DCD Data Carrier Detect 1 8 7 Brown RD Received Data 2 3 6 Yellow SG Signal Ground 5 7 5 Green SG Signal Ground 5 7 4 Red TD Transmitted Data 3 2 3 Black DTR Data Terminal Ready 4 20 2 Orange RTS Request To Send 7 4 1 Blue DSR Data Set Ready 6 6 RI Ring Indicator 9 22 -

-10-

M PL E

Step 4: Connecting NetEnrich Appliance to Controller/Management Network 1 and External Network 0

Internet Internet // WAN WAN

Firewall/ DMZ

External Network 0

Ethernet Switch

Controller Network 1

SA

NetEnrich Appliance - Back Side

January 2006

-11-

Step 5: Connecting to and Using the NetEnrich system 1.

Power up the NetEnrich VPM Gateway appliance and wait for the appliance to boot up. 2. Power up the NetEnrich VPM Hard Controllers via PoE or AC adapter. 3. Connect a laptop or PC to the External Network 0, and assign it a static IP address: 172.21.11.100 and Netmask: 255.255.0.0 4. If you need to change the preset network configuration settings on the NetEnrich appliance(s) you can either access the administration console webpage at https://172.21.11.51:8443 or use the serial port access with settings 115200,8,N,1 using VT100 to make the modifications. Login with username “admin” and password “admin”. -- NOTE: FOR SECURITY REASONS, PLEASE CHANGE THE PASSWORD ASAP! 5. Connect to the NetEnrich VPM Gateway using a web browser within the External Network 0, and point it to https://172.21.11.51/nems (username: nems; password: nems) or use the changed settings applied in above step 4 -- NOTE: FOR SECURITY REASONS, PLEASE CHANGE THE PASSWORD ASAP! 6. Configure and create objects – Companies, Users, Roles, Controllers, Devices, Device Groups, Permissions 7. Refer to the NetEnrich VPM Gateway Installation Guide section for more details on installation. For further information, please contact NetEnrich at support@netenrich.com

January 2006

-12-

Turn static files into dynamic content formats.

Create a flipbook