17.75" Rack: Telect's New 2-Post Earthquake-Safe Data Center Rack with 17.75" Rail-to-Rail Clearance

Page 1


17.75" Seismic Rack :: Network Bay Base

Racks :: Seismic-Certified Overview

Primary Benefits

Telect engineered the 17.75" Rack to respond to the dynamic needs of the telecom industry. The 17.75" Rack is the solution for customers needing a smaller—but still powerful—earthquake-safe data center rack with a wide rail-to-rail clearance to fit a variety of equipment. The 17.75" Rack provides a generous 17.75" rail-to-rail clearance, earthquake-safe certification (rated Zone 4 up to 300 Ibs.), and a two-post footprint.

• Equipment management solution • 17.75" rail to rail clearance • Supports 19" rack mount equipment • Certified Zone 4 seismic to support a 300 Ib equipment load • “C” Channel Profile • Engineered to use standard Network Bay accessories • Two-post for reduced footprint • Provides the most complete selection of rack accessories available, helping you build the rack solution that fits the application • Dimensionally equivalent to telephone industry standard racks • Pre-drilled and tapped to accept equipment and available accessories • Conforms to GR-63 Core Earthquake Resistance Criteria

The 17.75" Rack features a “C” channel profile and uses standard Network Bay accessories. The two-post steel design supports rack-mounted equipment in all standard types of network and data center applications. Options include: • Guard box location on the narrow or wide flange • Open and closed duct

Network Bay Accessories Structural components

Base bumper rails; bumper guards; base, capacity, and rack extenders; base guard boxes

End shields, panels, and guards

Provide cable protection; some end panels and guards include cutouts for power receptacles, switches, and alarm lights; offset bracket kits provide additional space between end guard and rack

Cable management components

Organize cables with cable racks and runway supports

Rack joining components

Secure adjacent free-standing or overhead-supported racks

142256-300

Applications

• Indoor commercial environments (central office and data center)

Specifications Dimensions Height

7' (213.36 cm) 21.94" (55.73 cm)

Power receptacle and switch kits

Power components for mounting in guard box cover or end guard

Width Depth

9.63" (24.46 cm)

Rack dolly kits

Gives mobility to 19" and 23" racks

Weight Capacity

Zone 4 certified to 300 lbs

Anchor kits

Secure racks to concrete floors

Ground kits

Insulated copper wire with lugs and mounting hardware suitable for grounding a bay to a common system or splicing systems together

Designation card holders

Fixed and adjustable card holders mount to rack head rail to identify a rack system

Plastic and metal cable tie bracket kits

Provide simple and effective cable management

Materials 11 gauge steel

Finish

UL Pantone, assorted colors, TGIC polyester powder coat

Mounting holes

Tapped to accept 12-24 hardware

Mounting hole pattern EIA wide (standard)

Additional accessories are shared with other racks and cabinets.

Note: Seismic-rated racks conform to GR-63-CORE Earthquake Resistance Criteria when loaded with 300 lbs. and installed with Telect’s seismic anchor kit. © Telect, Inc., All Rights Reserved, 6.22.12 1.509.926.6000 :: telect.com

Material

1.75" RU (1.25", 0.5" 1.25")

Order the 17.75" Rack at telect.com/17.75

1


17.75" Seismic Rack :: Unequal Flange Base

Racks :: Seismic-Certified Overview

Primary Benefits

Telect engineered the 17.75" Rack to respond to the dynamic needs of the telecom industry. The 17.75" Rack is the solution for customers needing a smaller—but still powerful—earthquake-safe data center rack with a wide rail-to-rail clearance to fit a variety of equipment. The 17.75" Rack provides a generous 17.75" rail-to-rail clearance, earthquake-safe certification (rated Zone 4 up to 300 Ibs.), and a two-post footprint.

• Equipment management solution • 17.75" rail to rail clearance • Supports 19" rack mount equipment • Certified Zone 4 seismic to support a 300 Ib equipment load • “C” Channel Profile • Engineered to use standard UEF accessories • Two-post for reduced footprint • Provides the most complete selection of rack accessories available, helping you build the rack solution that fits the application • Dimensionally equivalent to telephone industry standard racks • Pre-drilled and tapped to accept equipment and available accessories • Conforms to GR-63 Core Earthquake Resistance Criteria

The 17.75" Rack features a “C” channel profile and uses standard Unequal Flange (UEF) accessories. The two-post steel design supports rack-mounted equipment in all standard types of network and data center applications. Options include: • Guard box location on the narrow or wide flange • Open and closed duct

Unequal Flange Base Accessories Structural components

Base bumper rails; bumper guards; base, capacity, and rack extenders; base guard boxes

End shields, panels, and guards

Provide cable protection; some end panels and guards include cutouts for power receptacles, switches, and alarm lights; offset bracket kits provide additional space between end guard and rack

Cable management components

Organize cables with cable racks and runway supports

Rack joining components

Secure adjacent free-standing or overhead-supported racks

12545-300

Applications

• Indoor commercial environments (central office and data center)

Specifications Dimensions Height

7' (213.36 cm) 21.94" (55.73 cm)

Power receptacle and switch kits

Power components for mounting in guard box cover or end guard

Width Depth

9.63" (24.46 cm)

Rack dolly kits

Gives mobility to 19" and 23" racks

Weight Capacity

Zone 4 certified to 300 lbs

Anchor kits

Secure racks to concrete floors

Ground kits

Insulated copper wire with lugs and mounting hardware suitable for grounding a bay to a common system or splicing systems together

Designation card holders

Fixed and adjustable card holders mount to rack head rail to identify a rack system

Plastic and metal cable tie bracket kits

Provide simple and effective cable management

Materials 11 gauge steel

Finish

UL Pantone, assorted colors, TGIC polyester powder coat

Mounting holes

Tapped to accept 12-24 hardware

Mounting hole pattern EIA wide (standard)

Additional accessories are shared with other racks and cabinets.

Note: Seismic-rated racks conform to GR-63-CORE Earthquake Resistance Criteria when loaded with 300 lbs. and installed with Telect’s seismic anchor kit. © Telect, Inc., All Rights Reserved, 6.22.12 1.509.926.6000 :: telect.com

Material

1.75" RU (1.25", 0.5" 1.25")

Order the 17.75" Rack at telect.com/17.75

1


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.