Stringing Equipment Equipment for laying Underground Cables
2012 Catalogue
Index
Pullers ARS200
U 10
ARS404
U 40
ARS505
U 50
ARS607
U 60
Additional Devices Remote controls (AX)
U 70
Electronic pull and speed recorder (DLR300)
U 80
Hydraulic Drum Elevators Heavy duty drum elevators (CVI600-CVI810-CVI816)
U 90
Heavy duty drum elevator (CVI830)
U 100
Mechanical drum trestle (CVM)
U 101
Reels and Steel Rope Standard reels (BOF) / Detachable reels (BOC)
U 105
Anti-twisting steel braided rope (FUX) / High tech anti-twisting steel braided rope (FUH)
U 110
Accessories Cable rollers (ACR)
U 120
Corner rollers (ACR)
U 130
Cable guiding devices (ACR)
U 140
Cable guiding devices (ACR)
U 150
Cable guiding devices (ACR)
U 160
Cable guiding devices (ACR)
U 170
Cable guiding devices (ACR)
U 180
Fiberglass rods (ACV)
U 190
Fiberglass rods (ACV)
U 200
Accessories for fiberglass rods (ACV)
U 210
Pulling eyes (CX)
U 220
Reusable pulling eyes (CX)
U 230
Head type sock joints (GCL-GCT)
U 240
Sock joints (GCP/GCA-GCS)
U 250
Connecting devices (GGT-ALG)
U 260
PULLERS
Hydraulic Puller
ARS200 The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated steel.
695
Performance
Configuration
Note: the basic machine performance is calculated at 20°C and at sea level
Negative self-acting hydraulic brake Hydraulic dynamometer with set-point and automatic control of maximum pull On board reel winder with automatic level wind and special reel BOF370 for 500 m of Ø 8 mm rope
Characteristics
Additional Devices
Max pull Speed at max pull Max speed Pull at max speed
15 kN 0.7 km/h 3.6 km/h 4 kN
800
1425
200 mm ALL102 8 mm 500 kg ALL105
Bull-wheel diameter Max rope diameter Mass (without rope)
Engine Gasoline Cooling system Electrical system
13 kW (18 hp) ALL107 air ALL111 12 V ALL112
Hydraulic Transmission Closed hydraulic circuit for stepless speed variation in both rotating directions. ALL120 ALL107
ALL111
Pulling rope locking device when capstan is used (compulsory for EC market) Rigid axle and towing bar detachable, for manual towing Capstan (diameter=220 mm equipped with guide rope rollers) Swivel guide rope roller Trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing shaft with inertial braking system. Hook with Ø 40 mm eye. Lighting system included Noise reduction and protective covers
1425
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 10
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Hydraulic Puller
ARS404 The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated steel. The puller has been specifically designed for laying underground cables.
Performance
Configuration
1380
Max pull Speed at max pull Max speed Pull at max speed
32 kN 1.4 km/h 4.5 km/h 10 kN
Note: the basic machine performance is calculated at 20°C and at sea level
Characteristics 1580
Bull-wheel diameter Max rope diameter Mass (without rope)
250 mm 10 mm 1000 kg
Engine Diesel Cooling system Electrical system
2450
Hydraulic Transmission
Additional Devices
Closed hydraulic circuit for stepless speed variation in both rotating directions.
ALL110
1700
2300
ALL110
25 kW (34 hp) water 12 V
600
Negative self-acting hydraulic brake Hydraulic dynamometer with set-point and automatic control of maximum pull Hydraulic oil cooling system Control instruments for hydraulic system and Diesel engine Rigid axle for towing at max speed of 30 km/h with mechanical parking brake On board reel winder with automatic level wind and special reel for 1000 m of Ø 10 mm rope Electronic pull and speed recorder kit (instrument not included) Pull pre-setting system Mechanical front stabiliser Grounding connection point
1216
ALL112
Underground cable pulling attachment ALL112 Trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing shaft with inertial braking system. Hook with Ø 40 mm eye. Lighting system included ALL120 Noise reduction and protective covers DLR300 Electronic pull and speed recorder
1500
DLR300
3950
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 40a
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Hydraulic Puller
ARS505 The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated steel. The puller has been specifically designed for laying underground cables.
Performance
Configuration
1560
Max pull Speed at max pull Max speed Pull at max speed
50 kN 1 km/h 5 km/h 10 kN
Note: the basic machine performance is calculated at 20°C and at sea level
Characteristics
1970
Bull-wheel diameter Max rope diameter Mass (without rope)
350 mm 14 mm 1850 kg
Engine Diesel Cooling system Electrical system
2440
ALL110
34 kW (46 hp) water 12 V
Hydraulic Transmission Closed hydraulic circuit for stepless speed variation in both rotating directions.
Additional Devices Underground cable pulling attachment ALL112 Trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing shaft with inertial braking system. Hook with Ø 40 mm eye. Lighting system included DLR300 Electronic pull and speed recorder
2300
ALL110
1700 600
Negative self-acting hydraulic brake Hydraulic dynamometer with set-point and automatic control of maximum pull Hydraulic oil cooling system Digital meter counter Control instruments for hydraulic system and Diesel engine Rigid axle for towing at max speed of 30 km/h with mechanical parking brake On board reel winder with automatic level wind and special reel for 700 m of Ø 14 mm rope Noise reduction protection Electronic pull and speed recorder kit (instrument not included) Pull pre-setting system Mechanical front stabiliser Grounding connection point
1216
ALL112 1570
DLR300
4050
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 50
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Hydraulic Puller
ARS607 The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated steel. The puller has been specifically designed for laying underground cables. The machine is provided with twin speed device allowing to choose between two different working positions: high pull-low speed or high speed-low pull.
Performance
Configuration
1850
Max pull Speed at max pull Max speed Pull at max speed
100 kN 0.5 km/h 4 km/h 12.5 kN
Note: the basic machine performance is calculated at 20°C and at sea level
Characteristics
2390
Bull-wheel diameter Max rope diameter Mass (without rope)
400 mm 16 mm 2500 kg
Engine Diesel Cooling system Electrical system
2800
ALL110
48 kW (65 hp) water 12 V
Hydraulic Transmission Closed hydraulic circuit for stepless speed variation in both rotating directions.
2300
Additional Devices
1700 600
ALL112 1780
DLR300
4350
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Cable remote control kit (instrument not included) ALL059 Radio remote control kit (instrument not included) ALL110 Underground cable pulling attachment ALL112 Trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing shaft with inertial braking system. Hook with Ø 40 mm eye. Lighting system included ALL116 Free-wheel device (max pay-out speed 15 km/h) DLR300 Electronic pull and speed recorder ALL051
1216
Keep you updated on:
Negative self-acting hydraulic brake Hydraulic dynamometer with set-point and automatic control of maximum pull Hydraulic oil cooling system Digital meter counter Control instruments for hydraulic system and Diesel engine Rigid axle for towing at max speed of 30 km/h with mechanical parking brake On board reel winder with automatic level wind and special reel for 1000 m of Ø 16 mm rope Noise reduction protection Electronic pull and speed recorder kit (instrument not included) Pull pre-setting system Mechanical front stabiliser Grounding connection point High pull/low speed & low pull/high speed selection
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 60a
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ADDITIONAL DEVICES
Remote Controls
AX CABLE REMOTE CONTROL AXC005 The cable remote control Mod. AXC005 allows to operate same controls of the machine in a different position compared to the control panel. In particular it is complete with the following devices: • • • •
setting of the pull/tensioning value control of direction and speed rotation of the bull wheels control of Diesel engine rpm stop all the functions of the machine
Technical Characteristics
Dimensions
Applicability
These devices have the capacity to operate until a maximum distance of 10 meters. Anti-shock material box having IP54 grade.
610 x 150 x 265 mm
The cable remote control AXC005 can only equip ARS607.
Mass 4.5 kg
RADIO REMOTE CONTROL AXH007 The radio remote control Mod. AXH007 allows to operate same controls of the machine in a different position compared to the control panel. In particular it is complete with the following devices: • • • •
setting of the pull/tensioning value control of direction and speed rotation of the bull wheels control of Diesel engine rpm stop all the functions of the machine
Technical Characteristics
Dimensions
Applicability
These devices have the capacity to operate until a maximum distance of 150 meters. Anti-shock material box having IP65 grade.
235 x 150 x 160 mm
The radio remote control AXH007 can only equip ARS607.
Mass 1.2 kg
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 70
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Electronic Pull and Speed Recorder DLR300
Electronic device that allows the monitoring of stringing operations by recording the following data: • • •
applied pull, with the exceeding control of a limit value stringing speed stringing length
The unit can also give the following information for any single record: • date and hour of monitoring start • value for the limiting control value • sampling distance time • date and hour of monitoring end In addition there is a printer with real time function; it is also possible to print a graph of the record. It is possible to connect the unit to the PC for downloading the data or to download data on external Pen drive by using USB port on the unit. The recorder is equipped with a rigid box for transport, connecting cables, software disk for PC connection and protecting case in PVC, electrical power adapter and adapter plugs for the connection to the machine.
Technical Characteristics
Dimensions
Voltage
345 x 200 x 65 mm
Display
10 ÷ 28 V 2 rows with 16 digits
Mass 1.5 kg
Applicability
Additional Devices
The unit can be connected to all Tesmec machines equipped with additional device ALL053.
DLK301 Stand support
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 80
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
HYDRAULIC DRUM ELEVATORS
Heavy Duty Drum Elevators
CVI600-810-816 Tesmec drum elevators are made of welded steel with a protective coating;the frames are detachable to reduce dimensions during transport. The lifting operation is made by means of hydraulic cylinders. The drum elevators must be completed with the optional CDR or CDT. The drum elevator Mod. CVI816 includes the main frame with a mechanical disk braking system and it is already equipped with support with self locking fixing wedges for wooden conductor reels. The picture shows the CVI with the CDR.
Model
A 2140 2500 2800
CVI600 CVI810 CVI816
Bmin 500 800 1500
Bmax 1500 1850 2600
Dimensions [mm] Cmin Cmax 580 1340 720 1725 960 1770
D 640 740 900
Emin 1200 1500 2000
Emax 2500 3200 3400
Shaft Ø [mm] 40 40 70
Capacity [kN] 70 100 160
Mass [kg] 430 550 1340
Braking System
E
C
Model CVI600 CVI810 CVI816
one manual disk brake (max torque 1 kN x m) one manual disk brake (max torque 2.3 kN x m) two manual disk brakes (max torque 6 kN x m)
Additional Devices Model
A
CVI600 CVI810 CVI816
B
CDF
Support with self-locking Special driver with fixed fixing wedges for wooden wedges for steel conductor conductor drums reels (*) CDR002 CDTxxx CDR057 CDTxxx included CDTxxx
(*) reel drawing is required
D
D
CVI + CDR
X
D
D
CVI + CDT (*)
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 90
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Heavy Duty Drum Elevator
CVI830 This drum elevator is made of welded steel with a protective coating; the frame is partially detachable to reduce dimensions during transport. The drum elevator includes the main frame with supports for wooden or for steel made reels (to be specified in the order) and 2 mechanical disks braking system. Note: in case of steel made reels, the drawing is required.
Model
A 3000
CVI830
Bmin 1600
Bmax 2800
Dimensions [mm] Cmin Cmax 1550 2150
D 600
Emin 3000
Emax 4600
Shaft Ø [mm] 140
Capacity [kN] 300
Mass [kg] 1600
Configuration Two manual disk brakes (max torque 3.5 kN x m) Support for wooden or steel made reels
C
E
A
B
D
D
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 100
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Mechanical Drum Trestle
CVM Mechanical drum trestle with adjustable position. The jacks lift by a screw operated by a crank handle. Wide base support assures the reel stability. The length of screw is suitable to different reel dimensions. Made of highly galvanized steel to lift reels of diameter between 400 and 3000 mm.
Capacity [Kg] 1500 3000 5000 10000
Model CVM007 CVM205 CVM407 CVM802
Reel diameter [mm] 400 - 1800 700 - 2600 930 - 3000 1160 - 3000
Height [mm] 74 100 130 130
Mass [Kg] 30 64 70 88
ACCESSORIES Galvanised collar
Alloy tubolar shaft with bearings Model CDS031 CDS032 CDS027 CDS028 CDS029
Length [mm] 1800 2050 1500 1800 2050
Ø [mm] 90 90 75 75 75
Capacity [Kg] 10000 10000 5000 5000 5000
Mass [Kg] 22.2 25.3 14.6 18.5 19.6
Model CDS038 CDS039 CDS033 CDS034 CDS035 CDS036
CDO040 CDO041 CDO042
Axle Ø [mm] 60 75 90
Mass [Kg] 1.2 1.5 1.7
Galvanised fixing cones
Galvanised steel tubolar shaft with ball-bearing Length [mm] 1800 2050 1500 1500 1800 2050
Model
Ø [mm] 90 90 60 75 75 75
Capacity [Kg] 10000 10000 3000 5000 5000 5000
Mass [Kg] 22.2 25.3 18 14.6 18.5 19.6
Model CDO044 CDO045 CDO046
Ø [mm] 85 - 130 110 - 150 65 - 115
Axle Ø [mm] 75 90 60
Mass [Kg] 7 8.5 3
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 101
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
REELS AND STEEL ROPE
Reels
BOF-BOC The reels are made of welded steel with protective coating. Each reel is provided with two cross supports and connecting bolts in separate package.
BOF
BOC
Standard Reels - BOF
C
D
Ø 50
Standard Reels Model BOF010 BOF020
B
A
A 420 420
Dimensions [mm] B C 560 570 560 570
D 1100 1400
Mass [kg] 53 73
A 420 420
Dimensions [mm] B C 560 590 560 590
D 1100 1400
Mass [kg] 75 86
Detachable Reels - BOC The reels are made of welded steel with protective coating. A detachable side and the conical drum facilitate removal of rope or conductor coil.
Detachable Reels Model BOC040 BOC050
D
C
Ø 50
Reel Max Capacity for Anti-Twisting Braided Rope [m] (See page U 110) Reels Ø Rope 6 8 10 13 16
B
A
Cross support - BOS360
BOF010 BOF020 BOF030 BOF330 BOC040 BOC050 BOC310 BOC320 7700 4300 2700 1600 1000
13400 7500 4850 2720 1800
27300 15100 9800 5550 3750
93200 52400 33550 19850 13100
6950 3800 2350 1400 910
13200 7250 4570 2400 1700
43400 24450 15600 9250 6100
76000 42750 27350 16200 10650
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 105
Mass with bolts: 2.6 kg &HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Anti-Twisting Steel Braided Rope
FUX-FUH STANDARD - FUX Anti-twisting galvanised steel rope, made up of braiding strands. Advantages: • high flexibility • complete stability to rotation • homogeneous distribution of pressure between the elementary wires • increased efficiency during stringing operations • strands with individual galvanized elementary wires
Model
Nominal diameter
FUX006 FUX008 FUX010 FUX013 FUX016
[mm] 6 8 10 13 16
Indicative lubricated linear mass* [kg/m] 0.11 0.22 0.35 0.55 0.84
Minimum breaking load [kN] 21.5 42.6 68 101 160
Standard length** [m] 1800-3600 1600 1200 800-1600 900
*According to production variations, the linear mass may change
HIGH TECH - FUH Rope having same technological advantages of FUX, but made with high tensile strength steel strands allowing higher working and breaking loads with the same linear mass.
Model FUH009 FUH013 FUH016
Nominal diameter [mm] 9 13 16
Indicative lubricated linear mass [kg/m] 0.25 0.50 0.76
Minimum breaking load [kN] 60 121 183
Standard length** [m] 1600 800-1600 900
**The rope is also available in longer continuous sections (without connectors) up to 7000 m Note: sections are supplied with spliced eyes in the following models: • ALF001 for diameters 06-10 mm • ALF002 for diameters 13-16 mm
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 110
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ACCESSORIES
Cable Rollers
ACR ACR001
STANDARD
ACR191
Made of galvanized steel and mounted on protected ball bearings, suitable for cables up to ø 120 mm. Also available with Al roller (model ACR191).
Dimensions (l x w x h) [mm] 300 x 240 x 250 300 x 240 x 250
Model ACR001 ACR191
Rollers dimensions (l x Ø x Ø) [mm] 190 x 110 x 76 190 x 125 x 76
Max working load [kg] 170 200
Mass
Rollers dimensions (l x Ø x Ø) [mm] 216 x 80 x 80
Max working load [kg] 300
Mass
Rollers dimensions (l x Ø x Ø) [mm] 100 x 60 x 50
Max working load [kg] 280
Mass
[kg] 3.8 4.7
HEAVY DUTY Specifically designed for heavy and thick cables up to ø 180 mm. Made of galvanized steel and mounted on protected and heavy-duty ball bearings.
Dimensions (l x w x h) [mm] 310 x 255 x 270
Model ACR192
[kg] 7.5
THREE-ROLLERS Roller for straight and slightly bended sections, suitable for cables up to Ø 150 mm. Frame made of galvanised steel, rollers of Al.
Model ACR193
Dimensions (l x w x h) [mm] 250 x 250 x 250
[kg] 5
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 120
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Cable Rollers
ACR STANDARD Made of galvanized steel and mounted on protected ball bearings, suitable for cables up to ø 120 mm. Corner rollers can be attached one to the other as to obtain different bending radius. Also available with Al rollers (model ACR194).
Dimensions (l x w x h) [mm] 550 x 340 x 370 550 x 340 x 370
Model ACR002 ACR194
Rollers dimensions (l x Ø x Ø) [mm] 190 x 110 x 76 190 x 125 x 76
Max working load [kg] 250 270
Mass
Rollers dimensions (l x Ø x Ø) [mm] 200 x 83 x 83
Max working load [kg] 400
Mass
[kg] 12 17
ADJUSTABLE Made of galvanized steel and mounted on protected ball bearings, suitable for cables up to ø 140 mm. Corner rollers can be attached one to the other as to obtain different bending radius.
Model ACR195
Dimensions (l x w x h) [mm] 370 x 330 x 420
[kg] 29
ADJUSTABLE HEAVY DUTY Specifically designed for heavy and thickcables up to ø 180 mm. Made of galvanized steel and mounted on protected ball bearings.
Max working load [kg] 500
Model ACR196
Mass [kg] 34
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 130
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Cable Guiding Devices
ACR RUN-OFF FRAME Made of galvanized steel. The rollers are mounted on protected ball bearings. It is specifically designed to guide the cable just after coming out from the drum, in order to guarantee the cable to be in the right position when being used with the next rollers. Dimensions (l x w x h) [mm] 1050 x 470 x 520
Model ACR005
Rollers dimensions (l x Ø x Ø) [mm] 620 x 40 x 40
Max working load [kg] 300
Mass [kg] 14
RUN OF FRAME (PIPES) Made of galvanized steel. The rollers are mounted on protected ball bearings.
Max pipe diameter
Model
[mm] 450 750
ACR197 ACR198
Max working load [kg] 500 1000
Mass [kg] 12 29
EDGE ROLLER Galvanized roller placed on a swivel base, suitable for cables up to ø 80 mm. Specifically designed to be used along with rims of manholes and trenches.
Model ACR095
Dimensions (l x w x h) [mm] 350 x 250 x 210
Rollers dimensions (l x Ø x Ø) [mm] 130 x 110 x 76
Max working load [kg] 100
Mass
Rollers dimensions (l x Ø x Ø) [mm] 100 x 200 x 140
Max working load [kg] 250
Mass
[kg] 6
EDGE ROLLER HEAVY DUTY Galvanized heavy-duty roller placed on a swivel base, suitable for cables up to ø 60 mm. Specifically designed to be used along with rims of manholes and trenches.
Model ACR199
Dimensions (l x w x h) [mm] 315 x 250 x 230
[kg] 18
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 140
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Cable Guiding Devices
ACR CABLE PROTECTOR BEND Made of galvanized steel, suitable for cables up to ø 60 mm. Specifically designed to protect cables along with rims of manholes and trenches.
Dimensions (l x w x h) [mm] 450 x 130 x 200
Model ACR104
Max working load [kg] 75
Mass [kg] 2
GUIDE ROLLERS Made of galvanized steel, suitable for cables up to ø 120 mm. Three rollers assembled on protected ball bearings. Specifically designed to be used along with the rims of manhole and trench. Also available with Al rollers (model ACR200).
Dimensions (l x w x h) [mm] 550 x 220 x 400 500 x 220 x 400
Model ACR004 ACR200
Rollers dimensions (l x Ø x Ø) [mm] 190 x 110 x 76 190 x 125 x 76
Max working load [kg] 250 270
Mass [kg] 10 15
ROLLERS CHAIN Made of galvanized steel. The rollers chain is composed by 12 jointed rollers. It is specifically designed to guide the cable along bends.
Rollers dimensions (l x Ø x Ø) [mm] 180 x 32 x 32
Model ACR182
Mass [kg] 28
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 150
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Cable Guiding Devices
ACR CABLE GUIDING RUN-OFF FRAME Composed by 4 rollers mounted on a sturdy frame. Made of galvanized steel.
Model ACR075
Dimensions (l x w x h) [mm] 500 x 130 x 500
Rollers dimensions (l x Ø x Ø) [mm] 60 x 60
Max working load [kg] 200
Mass [kg] 28
SUSPENSION ROLLER Made of galvanized steel. Specifically designed to be used in open trench in order to protect already laid cables.
Model ACR077 ACR078
Dimensions For trenches width 250 - 400 mm For trenches width 400 - 600 mm
Max working load [kg] 150 150
Mass
Max working load [kg] 250 250 250 250 250 250
Mass
[kg] 6 7
CABLE ROLLER - ADJUSTABLE BOOM Made of galvanized steel, suitable for cables up to ø 80 mm. Specifically designed to be used in open trench in case there are obstacles to be avoided.
Model ACR183 ACR184 ACR071 ACR072 ACR073 ACR074
Dimensions Boom stroke 300 - 500 mm Boom stroke 500 - 800 mm Boom stroke 600 - 1000 mm Boom stroke 1000 - 1500 mm Boom stroke 1500 - 1800 mm Boom stroke 1800 - 2400 mm
[kg] 9.5 10 13 16 18 23
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 160
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Cable Guiding Devices
ACR ROLLER ENTRY TOOL Made of galvanized steel with an opening frame on head and four rollers assembled on bearings. This tool provides easy cable entry into pipe irrespective of angle and direction. Also available with double protection.
Single protection Model ACR009 ACR010 ACR011 ACR012 ACR013 ACR014 ACR201 ACR202
Double protection Model ACR203 ACR204 ACR205 ACR206 ACR207 ACR208 ACR209 ACR210
External diameter [mm] 76 90 114 133 140 152 169 196
SIMPLE / BENT CABLE ENTRY TOOL Made of galvanized steel. Specifically designed to protect the cable in presence of sharp edges.
External diameter [mm] 76 90 114 140
Model ACR015 ACR016 ACR017 ACR019
End shape streight streight streight streight
Model ACR021 ACR022 ACR023 ACR151
External diameter [mm] 76 90 114 140
End shape bent bent bent bent
FLEXIBLE HOSE Specifically designed for cable laying in manholes, when job is thwarted by other cables. External diameter [mm] 90 110 115 150
Model ACR155 ACR211 ACR156 ACR212
Length [m] 3 3 3 3
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 170
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Cable Guiding Devices
ACR SHORT AND LONG RADIUS CABLE ENTRY TOOL Made of galvanized steel with three (R=420 mm) or four (R=1000 mm) rollers assembled on protected ball bearings and entry device for pipes. Particularly suitable to connect cable’s change of directions inside manholes.
Bending radius [mm] 420 420 420 420 420 420 420 1000 1000 1000 1000 1000 1000 1000
Model ACR082 ACR083 ACR084 ACR213 ACR214 ACR215 ACR216 ACR086 ACR087 ACR088 ACR217 ACR218 ACR219 ACR220
External diameter [mm] 76 90 114 133 152 169 196 76 90 114 133 152 169 196
SPARE DEVICE FOR CABLE ENTRY TOOL Made of galvanized steel.
External diameter [mm] 76 90 114 133 152 169 196
Model ACR090 ACR091 ACR092 ACR221 ACR222 ACR223 ACR224
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 180
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Fiberglass Rods
ACV Rod diameter 4.5, 6, 9 and 11 mm, made with a central part in fibreglass and an external abrasion-proof coating. It is supplied wound up on galvanized steel vertical reel frame. It comes complete with starting/ending threaded end and with a starting spinner (with hole for 4.5 and 6 mm, with shackle for 9 and 11 mm).
Model ACV225 ACV226 ACV227 ACV228 ACV229 ACV230 ACV231 ACV232 ACV233 ACV234 ACV235 ACV236 ACV131 ACV237 ACV238 ACV239 ACV240 ACV241 ACV026
Diameter [mm] 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6 6 6 6 6 6 6 6 6 6 6 6
Length [m] 20 30 40 50 60 70 80 30 40 50 60 70 80 30 40 50 60 70 80
Frame configuration vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical vertical
Model ACV242 ACV243 ACV025 ACV244 ACV245 ACV246 ACV247 ACV027 ACV029 ACV030 ACV031 ACV130
Diameter [mm] 9 9 9 9 9 9 11 11 11 11 11 11
Length [m] 60 70 80 100 120 150 100 120 150 200 250 300
Frame configuration vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m. vertical, t. m.
Note: t. m. = trailer mounted
Rod diameter 6 mm made with a central part in fiberglass and an external abrasion-proof coating. It is supplied wound up on galvanized steel horizontal reel. It comes complete with starting/ending threaded end and with a starting spinner with hole.
Diameter [mm] 6 6 6 6 6 6
Model ACV248 ACV249 ACV132 ACV133 ACV250 ACV251
Length [m] 30 40 50 60 70 80
Frame configuration horizontal horizontal horizontal horizontal horizontal horizontal
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 190
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Fiberglass Rods
ACV FREE SNAKES Rod diameter 4.5, 6, 9 and 11 mm, is available also as free snakes (without reels).
Diameter [mm] 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6 6 6 6 6 6
Model ACV252 ACV253 ACV254 ACV255 ACV256 ACV257 ACV258 ACV259 ACV260 ACV261 ACV262 ACV263 ACV264
Length [m] 20 30 40 50 60 70 80 30 40 50 60 70 80
Model ACV265 ACV266 ACV267 ACV268 ACV269 ACV270 ACV271 ACV272 ACV273 ACV274 ACV275 ACV276 ACV277 ACV278 ACV279
Diameter [mm] 9 9 9 9 9 9 9 9 9 11 11 11 11 11 11
Length [m] 30 40 50 60 70 80 100 120 150 100 120 150 200 250 300
REELS Made of galvanized steel.
For rod diameter [mm] 4.5 6 6 9 9 11 11
Model ACV280 ACV281 ACV282 ACV283 ACV284 ACV285 ACV286
Frame configuration vertical vertical horizontal vertical vertical, t. m. vertical, t. m. vertical, high storage capacity, t.m. Note: t. m. = trailer mounted
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 200
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Accessories for Fiberglass Rods
ACV Starting/Ending threaded junctions Model ACV287 ACV185 ACV057 ACV058
Description for rod ø 4.5 mm, thread M5 for rod ø 6 mm, thread M6 for rod ø 9 mm, thread M12 for rod ø 11 mm, thread M12
Coupling joint for rods repairing Model ACV288 ACV186 ACV055 ACV056
Description for rod ø 4.5 mm for rod ø 6 mm for rod ø 9 mm for rod ø 11 mm
Starting Spinner Model ACV289 ACV290
Description for rod ø 4.5 mm, thread M5 for rod ø 6 mm, thread M6
Starting Spinner with shackle Model ACV187 ACV052
Description for rod ø 6 mm, thread M6 for rod ø 9 and 11 mm, thread M12
Starting Roller Model ACV188 ACV054
Description for rod ø 6 mm, thread M6 for rod ø 9 and 11 mm, thread M12
Connecting Device Model ACV291 ACV051
Description for rod ø 6 mm, thread M6 for rod ø 9 and 11 mm, thread M12
Catch Hooks Model ACV189 ACV190 ACV180
Description thread M12, pipe ø 80-100 mm thread M12, pipe ø 100-120 mm thread M12, pipe ø 125-200 mm
Glue for repairing fiberglass rods Model ACV292
Description glue, 150 gr
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 210
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Pulling Eyes
CX PULLING EYES FOR PIPES Reusable power pulling eyes, fixed head specifically designed to pull pipes.
Model CX08913400 CX08913320 CX08913410 CX08913411 CX08913322 CX08913412
Pipe diameter [mm] 18-22 24-27 27-37 35-43 43-46 49-54
Nominal size [in] 0.75 1 1.25 1.5 1.75 2
Max O.D. [mm] 32 31 44 51 57 62
Hole Ø
Eye Ø
[mm] 6 6 11 11 10 11
[mm] 13 13 13 13 13 13
Eye Thickness [mm] 10 6 13 13 13 13
PULLING EYES FOR PE & PVC PIPES Reusable power pulling eyes, fixed head specifically designed to pull PE & PVC pipes.
Model CX08220020 CX08220030 CX08220611 CX08220050 CX08220060
Nominal size [in] 2 3 4 5 6
Pipe diameter [mm] 48-55 68-79 89-106 108-129 129-152
Length
Lead cone O.D
[mm] 206 302 358 469 498
[mm] 60 89 122 141 168
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 220
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Reusable Pulling Eyes
CX STANDARD HEAD Standard head power pulling eyes are specifically to be used when pulling multiple cables. Each standard head power pulling eye includes an eye socket, sleeve nut and plug. Model CX08917220 CX08917120 CX08917820 CX08917920 CX08917720 CX08918020 CX08918120
Cable size
Max conductor Ø
[kcmil] 750 1000 1250 1500 1750 2000 2500
[mm] 25 29 33 36 39 41 46
Max eye O.D [mm] 44 52 57 60 63 64 76
Hole Ø D [mm] 15 25 25 25 25 25 25
Eye thickness T [mm] 11 13 13 13 13 13 13
CLEVIS HEAD Clevis head power pulling eyes are specifically to be used when pulling multiple cables. Each clevis head power pulling eye includes a clevis socket, sleeve nut and plug. Model
Cable size [kcmil] 750 1000 1250 1500 1750 2000 2500
CX08917250 CX08917150 CX08917850 CX08917950 CX08917750 CX08918050 CX08918150
Max conductor Ø [mm] 25 29 33 36 39 41 46
Max eye O.D A [mm] 44 52 57 60 64 64 76
Slot width B [mm] 16 19 19 19 25 25 25
Slot depth C [mm] 40 45 45 45 71 71 71
Pin Ø D [mm] 14 16 16 16 22 22 22
Pin center E [mm] 20 18 18 18 31 31 31
Max eye O.D A [mm] 44 52 57 60 64 64 76
Slot width B [mm] 16 19 19 19 25 25 25
Slot depth C [mm] 40 45 45 45 71 71 71
Pin Ø D [mm] 14 16 16 16 22 22 22
Pin center E [mm] 20 18 18 18 31 31 31
SWIVEL HEAD The swivel head power pulling eye is a hyped tool that combines features from standard reusable with pulling eyes and swivels. It eliminates the need for different separate swivel on each pulling eye when installing single cables. Each swivel head power pulling eye includes a swivel head, sleeve nut and plug. Model CX08917275 CX08917175 CX08917875 CX08917975 CX08917775 CX08918075 CX08918175
Cable size [kcmil] 750 1000 1250 1500 1750 2000 2500
Max conductor Ø [mm] 25 29 33 30 39 41 46
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 230
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Head Type Sock Joints
GCL-GCT Specifically designed to temporally connect the cable to the pulling rope. They consist of steel wire which effectively distribute the grip effect on the cable.
Head type sock joint with 1 Loop-Long Mod. GCL Model GCL110 GCL120 GCL130 GCL140 GCL150 GCL160 GCL170 GCL180 GCL190 GCL200 GCL210 GCL220 GCL230 GCL221 GCL231
Cable Ø [mm] 10-14 15-20 21-25 26-30 26-45 31-40 41-50 46-60 61-80 81-100 101-140 141-170 171-200 150-180 180-210
Net length [mm] 900 900 1000 1200 1500 1500 1500 1600 1800 2000 2000 2000 2000 2000 2000
Breaking load [kN] 20 20 25 30 50 45 50 50 80 100 100 100 100 200 200
Suitable swivel
Net length [mm] 600 600 600 600 700 700 800 800 800 1000 1200 1200 1200
Breaking load [kN] 20 20 25 30 45 50 50 50 80 100 100 100 100
Suitable swivel
GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT010 GGT010 GGT010 GGT010 GGT020 GGT020
Head type sock joint with 1 Loop-Short Mod. GCT Model GCT380 GCT390 GCT400 GCT410 GCT420 GCT430 GCT440 GCT450 GCT460 GCT470 GCT480 GCT490 GCT495
Cable Ø [mm] 11-14 15-20 21-25 26-30 31-40 26-45 41-50 46-60 61-80 81-100 101-140 141-170 171-200
GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT010 GGT010 GGT010 GGT010
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 240
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Sock Joints
GCP/GCA-GCS Specifically designed to temporally connect the cable to the pulling rope. They consist of steel wire which effectively distribute the grip effect on the cable. Also available in open version.
Sock joint with 2 loops Mod. GCP/GCA Model Passing GCP241 GCP252 GCP262 GCP271 GCP281 GCP292 GCP301 GCP311 GCP326 GCP332 GCP341 GCP351 GCP361
Cable Ø [mm] 10-14 15-20 21-25 26-30 26-45 31-40 41-50 46-60 61-80 81-100 101-140 141-170 171-200
Open GCA240 GCA250 GCA260 GCA270 GCA280 GCA290 GCA300 GCA310 GCA320 GCA330 GCA340 GCA350 GCA360
Net length [mm] 800 800 800 800 1000 1000 1000 1000 1000 1200 1400 1400 1400
Breaking load [kN] 20 20 25 30 50 50 50 50 80 100 100 100 100
Suitable swivel GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001 GGT001
Specifically designed to temporally connect two lengths of cable. They consist of steel wire which effectively distribute the grip effect on the cable.
Double head type sock joint Mod. GCS Cable Ø [mm] 11-14 15-20 21-25 26-30 26-45 31-40 41-50 46-60 61-80 81-100 101-140 141-170 171-200 150-180 180-210
Model GCS620 GCS630 GCS640 GCS650 GCS660 GCS670 GCS680 GCS690 GCS700 GCS710 GCS720 GCS730 GCS740 GCS731 GCS741
Net length [mm] 1200 1200 1200 1200 1400 1400 1600 1600 1600 2000 2400 2400 2400 4000 4000
Breaking load [kN] 20 20 25 30 50 45 50 50 80 100 100 100 100 200 200
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 250
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
Connecting Devices
GGT-ALG SWIVEL JOINTS - GGT The swivel joints are suitable to connect the pulling rope to the mesh sock joint mounted on the conductor; they are mounted on thrust bearings and they are designed to avoid torsion strain accumulation. They are made of highly tensile galvanized steel; the special design can bear the high radial loads, which occur during the passage over the pulleys.
Dimensions [mm]
Model
A
GGT001 GGT010 GGT020
B C
A 106 143 184
B 28 40 54
C max 10 13 18
Pin type 209
Breaking load [kN] 70 110 220
Mass [kg] 0.3 0.925 2.15
Bolt type 2130
SHACKLES - ALG Screw pin anchor shackles meet the requirement of Federal Specification RR-C271D type IVA, Grade A, Class 2. Bolt type anchor shackles with head bolt-nut with cotter pin meet the requirement of Federal Specification RR-C-271D type IVA, Grade A, Class 3. Dimensions [mm] Model ALG050 ALG051 ALG052 ALG053 ALG054 ALG055 ALG056 ALG057 ALG058 ALG059 ALG060 ALG061 ALG062 ALG063 ALG064 ALG065
Al AIB working load limit
Nominal shakle size
[kN]
[in]
5 7.5 10 15 20 32.5 47.5 65 85 15 32.5 47.5 65 85 120 135
1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 7/16 5/8 3/4 7/8 1 1 1/4 1 3/8
Inside length 28.6 31 36.5 42.8 47.6 60 71 84 95 42.8 60 71 84 95 119 132
Inside width
Tolerance plus of minus
Diameter
At pin
At bow
At pin
12.7 13.5 16.7 18.3 20.6 27 31.8 36.5 42.9 18.3 27 31.8 36.5 42.9 52 57
19.8 21.4 26.2 29.4 33.3 42.9 51 58 68 29.4 42.9 51 58 68 83 89
7.94 9.53 11.1 12.7 15.9 19.1 22.2 25.4 28.6 12.7 19.1 22.2 25.4 28.6 34.9 38.1
Outside of eye 17.5 20.6 24.7 27 30.2 39.7 47.6 54 60 27 39.7 47.6 54 60 76 84
Length
Width
1.59 1.59 3.18 3.18 3.18 3.18 6.35 6.35 6.35 3.18 3.18 6.35 6.35 6.35 6.35 6.35
1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 1.59 3.18
Mass [kg] Screw pin Bolt type type 209 2130 0.05 0.08 0.14 0.20 0.29 0.60 1.05 1.54 2.35 0.36 0.73 1.23 1.79 3.75 5.31 7.18
&HUWL¿HG«4XDOLW\«6\VWHP
ISO 9001:2008 Keep you updated on:
Tesmec S.p.A.
www.tesmec.com
Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2012/06
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562
U 260
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
www.tesmec.com
Watch the video of the machines in action on your Smartphone
Tesmec S.p.A. Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562