There is no limit to our capabilities
Block Slab Stone Carving Restoration Dimensional Stone Building Stone Caps Treads Hearths Sills Panels Wall Stone Coping And much more
The physical properties of our stone are the same regardless of color, variations and natural characteristics
There is no substitute for natural stone and Cleveland Quarries has the highest quality products for creating and enhancing outdoor living spaces. Berea SandstoneTM is ideal for any landscape application. Both the Birmingham Buff and Amherst Gray Sandstones resist discoloration from the elements and have excellent slip resistance properties making it the perfect choice for patios, walkways and steps. Also available are a variety of treads, caps and custom fabricated accessories.
COMMERCIAL BUILDING STONE For nearly 150 years Cleveland Quarries Sandstone has been used in commercial applications all across North America. As a natural product, Berea SandstoneTM has unique physical properties, density and color variations that can apply to many historical, governmental and commercial projects. Also due to its durability, versatility and GREEN building properties, Berea SandstoneTM is an ideal choice for new construction projects of any scope or size.
RESIDENTIAL BUILDING STONE
Cleveland Quarries Sandstone can be cut and fabricated into many forms making it an easy choice for residential applications. From a traditional ashlar pattern to a modern wall cladding, Berea SandstoneTM truly has timeless appeal. Included in the product selection are a wide variety of veneer stones, custom fabricated panels, and architectural accents such as ballisters, columns, hearths and sills.
QUARRYING & FABRICATION Founded in 1868, Cleveland Quarries has recently moved from its legacy fabrication facilities, and has consolidated its operations into an updated, state-of-the-art facility with over 170,000 sq. ft. of manufacturing and office space. Now located in Vermilion, Ohio the new “Cleveland Quarries“ facility is equipped with all new fabrication equipment and utilizes advanced manufacturing methods to increase output and efficiency to meet growing demands, all while minimizing energy and water consumption.
PHYSICAL PROPERTIES OF “BEREA SANDSTONETM” The following table of physical properties of Amherst Gray and Birmingham Buff Sandstone are based on test results using ASTM procedures. Tests were performed by Geocon Geotechnical Consultants.
Amherst Gray Sandstone
Birmingham Buff Sandstone ASTM C170-87 ASTM C-99-87 Compressive Strength PSI
Modules of Rupture
Average
Average
(PSI) (MPa) 11576 79.8
(PSI) 1177
(MPa) 8.1
ASTMC-97-90
ASTM C-241-90
Absorption and Abrasion Bulk Specific Resistance of Gravity Stone Subjected to Foot Traffic Absorption Bulk Specific Gravity (%) 5.85
(kg/m3) 2153
Abrasive Hardness Value (1.1a) 9.48
ASTM C170-87 ASTM C-99-87 Compressive Strength PSI
Modules of Rupture
Average
Average
(PSI) (MPa) 11169 70.1
(PSI) 772
(MPa) 5.28
ASTMC-97-90
ASTM C-241-90
Absorption and Abrasion Bulk Specific Resistance of Gravity Stone Subjected to Foot Traffic Absorption Bulk Specific Gravity (%) 6.2
Abrasive Hardness Value (1.1a)
(kg/m3) 2119
10.89
Berea Sandstone Facts Silica Alumina Ferric Oxide Ferrous Oxide
SiO2 A12O3 Fe2O3 FeO
93.13% 3.86% 0.11% 0.54%
Magnesium Oxide Calcium Oxide Alkali Loss on Ignition
MgO CaO Alk
0.25% 0.10% 1.43%
Berea Sandstone is an excellent building stone due to the composition of grains of Quartz bonded by Silica. The extreme hardness of the Quartz grains of Berea Sandstone enables it to preserve an abrasive non-slip surface. In addition to hardness, the quartz grains of Berea Sandstone possess a chemical resistance to the erosive action of the acidic chemicals in the atmosphere of today's cities. The silica bond does not deteriorate with time, exposure to water or temperature change and so prolongs to longevity of the stone.
SPECIFICATIONS CUT STONE Quality: All stone indicated on the drawings shall be fine-grained Berea Sandstone, quarried from the Northern Ohio deposits of Cleveland Quarries, and geologically referred to as the “Berea Formation.” Sandstone shall be of homogenous composition throughout, with a moderate range of shadings and veinings, and shall come from quarries which have been in continuous operation for a period of 75 years or more. Cut Stone Finishes: Exposed surfaces of sandstone shall be finished with a Sand-Sawed, a smooth planed, diamond sawed finish as desired by architects. Samples: Prior to award of general contract, samples indicating range of color and veinings shall be submitted for approval of the architects.
Coverage: Wall coverage obtainable with the height ratio given for Split Face Ashlar, using a 1/2” mortar joint, should be approximately 40-45 square feet per ton. Pallets: All Ashlar Veneering is sold by weight and is furnished on wooden pallets, each of which contains approximately one ton quantities of specific colors and course heights. Prices are based on heights, colors and finish.
ASHLAR VENEERING Split Face Veneering: Sandstone fabricated by Cleveland Quarries, shall be furnished in random length unjointed strips, smooth sawed on top and bottom beds, split on back and front faces, in approximately 3-1/2” to 4” bed thicknesses. Standard Course Height Ratio is: 15% - 2-1/4”, 45% - 5”, and 40% - 7-3/4”. For large scale projects a 10-1/2” course height may be included. Other course heights and face finishes are also available. Please Note: Course height ratios may be varied by architects.
SLAB Buff and gray colors average size 72” x 60”, available from 2” to 18” thick.
ROCK FACE SILLS Sawn beds and full rock face. Widths up to 12 inches, lengths up to 8 feet and up to 3 inches height. Drip groove is also available. PATIO STONES Square sawn 2” thick from 12”x12” up to 24”x36”. Available in buff and gray colors.
CLEANING Stone work shall be cleaned down after completion of setting, using clear water and bristle brushes. Under no circumstances should acids or detergent be used. Stone shall be sponged free of mortar as the work progresses.
Since inception, Cleveland Quarries has followed the time-honored tradition of quarrying and fabricating quality sandstone. Still containing over 300 million cubic feet of deposits, our quarry is part of the oldest and largest sandstone formation in existence. The area was formed hundreds of millions of years ago when rock materials such as silica, magnesium and lime were deposited by the action of waves, formed in sheets, and were hardened by pressure and chemical action. One of these formations, the Berea, spans an irregular belt that has become the sandstone center of the world. This natural wonder has produced 500 million cubic feet of quality sandstone that distinguishes thousands of buildings and homes throughout North America. Acquired by IRG in 2007, and operating under new management, many operational changes have been made. . .but our products remain as high quality as ever.
5270 Devon Drive Vermilion, OH 44089 440-963-4008 • Toll Free 1-800-248-0250 Fax 440-963-4011 www.clevelandquarries.com