SEALEY TOOLS (PART5/5) by THAI PHATANASIN (CHIN SENG) CO.,LTD.

w w w.

seale

y. c o . u

JANITORIAL, GARDEN & LEISURE Barbecues....................................................................................... 1041 Bicycle Carriers, Stands & Racks ...............................1080-1081 Brooms & Brushes ...........................................................1020-1021 Bungee Cords....................................................................1067-1068 Cigarette Bins ................................................................................ 1025 Cleaning Accessories.....................................................1010-1011 Floor Cleaning ...................................................................1013-1022 Geared Winches ........................................................................... 1063 Galvanized Sheds.............................................................1076-1077 Grit/Salt Boxes .............................................................................. 1034 Hand Power & Rope Pullers...................................................... 1062 Hydraulic Platform Trucks......................................................... 1054 Ladders................................................................................1042-1049 Loft Ladder..................................................................................... 1048 Log Splitters.......................................................................1038-1039 Mops & Buckets............................................................................ 1022 Outdoor Furniture ........................................................................ 1040 Pallet Trucks................................................................................... 1055 Platform Trucks............................................................................. 1050 Platforms & Steps ............................................................1045-1046 Pond Pumps................................................................................... 1027 Pressure Washers............................................................1004-1007 Pressure Washers - 12V............................................................ 1009 Pressure Washers - Engine Powered .......................1007-1008

Ratchet Tie Downs...........................................................1069-1071 Recovery Winches...........................................................1062-1065 Refuse/Wheelie Bins.......................................................1023-1025 Sack Trucks ........................................................................1051-1053 Safety & Parking Barriers ..............................................1078-1079 ............................................................................... 1049 Snow Clearing Equipment ........................................................ 1036 Sprayers ..............................................................................1033-1034 Spreaders ...........................................................................1032-1033 Storage Shelters .......................................................................... 1074 Submersible Water Pumps...........................................1028-1030 Tarpaulins........................................................................................ 1067 Tow Ropes & Poles....................................................................... 1066 Towing Accessories ........................................................1056-1061 Trailer Boards................................................................................. 1059 Vacuum Cleaners .............................................................1013-1019 Valeting Machines........................................................................ 1019 Vehicle Covers ..................................................................1072-1073 Vehicle Locks & Clamps ............................................................ 1078 Warehouse Steps......................................................................... 1047 Water Hoses & Reels.......................................................1011-1012 Water Pumps .....................................................................1027-1031 Wheelbarrows ............................................................................... 1035 Workshop Matting ....................................................................... 1026

SECTION 17

JANITORIAL, GARDEN & LEISURE OUR JANITORIAL, GARDEN & LEISURE SECTION HAS CONTINUED TO GROW WITH SOME BRAND NEW DESIGNS AND EXCITING ADDITIONS. NEW - TWIN PUMP PRESSURE WASHER see page 1004 NEW - 20V ‘ONE BATTERY FITS ALL’ CORDLESS VACUUM see page 1018 NEW - LED TRAILER BOARDS see page 1039

NEW - HOT & COLD WATER PRESSURE WASHER see page 1007

1004 Pressure Washers 105bar Pressure Washers with TSS Model No. SEE BELOW Lightweight and powerful entry level units, designed for domestic and light trade use. Ideal for a range of applications including cleaning vehicles, patios, decking, motorbikes and barbecues. Fitted with a powerful 1400W motor with 300 105bar. Features Automatic Total Stop System (TSS) which prolonging motor life. Fitted with accessory storage and hose/cable hook to ensure unit stays clutter-free and mobile. Supplied with 3m hose, spray gun, lance and detergent bottle. Weighs just 4.66kg for ease of manoeuvrability. Model No:

Colour: Red Hi-Vis Green 105bar(1520psi) 300ltr/hr 1400W 230V - 13A

Supply:

3m 4.66kg

150bar Pressure Washer - Twin Pump with TSS & RotablastÂŽ Nozzle Model No. PWTF2200 Brand new patented design features two pumps and twin nozzle for up to 70% faster cleaning. Eco Soft cleaning mode only activates one pump for light use. Fast cleaning mode activates both pumps together and, with the twin release nozzle system allows fast selection between single or twin nozzle. Fitted with two 1250W motors with total 810 150bar. Features Automatic Total Stop System (TSS) which

TWIN NOZZLE

+70% FASTER

prolonging motor life. Supplied with 8m high pressure hose and reel, detergent bottle, 5m power cable and heavy duty wheels. 150bar(2200psi) 2500W 230V - 13A

Supply:

8m 13.95kg

Dual Pump Power Cleaning System

Eco Soft Cleaning

Fast Cleaning

Pump

Pumps

Oversized power control dial allows easy selection between Eco Soft and Fast Cleaning.

Pressure Washers 1005

Compatible with PWA08 Filter Kit

Pressure Washers with TSS & Rotablast® Nozzle Model No. SEE RIGHT

Model No: Maximum Pressure:

These models are designed for domestic and light trade applications. All models are supplied with a variable spray lance and Rotablast® Nozzle. Model No. PW1600 is supplied with a comprehensive range of accessory attachments to suit all cleaning applications. Model No’s PW1750 &

Supply:

PW1600 110bar(1600psi) 187bar(2720psi) 318ltr/hr 1300W 230V - 13A

PW1750 120bar(1750psi) 205bar(2975psi) 360ltr/hr 1400W 230V - 13A

PW2000 140bar(2030psi) 257bar(3740psi) 402ltr/hr 1700W 230V - 13A

5m 7.7kg

5m 13.5kg

5m 19.5kg

built-in detergent tanks. All models feature TSS technology greatly improving motor life.

Pressure Washer Accessories

The following accessories are suitable for use with Sealey Model No’s PW1600, PW1750 and PW2000. For full details please go to www.sealey.co.uk

345mm Extension Lance Model No. PCAK06

Variable Spray Jet Nozzle Hi-Low Pressure Model No. PCAK02

Variable Spray Jet Nozzle Model No. PCAK04

Turbo Rotablast® Nozzle Model No. PCAK03

Detergent Bottle Lance Model No. PCAK05

175mm Fixed Brush Model No. PCAK07

45º Angle Connector Model No. PCAK01

Ø150mm Rotary Brush Model No. PCAK08

Ø300mm Patio/Deck Surface Cleaner Model No. PCAK10

Pressure Washer Accessory Kit Model No. PCKIT Water Broom Model No. PCAK09

6m Pressure Washer Extension Hose Model No. PCAK12

4.5m Sand Blasting Kit Model No. PCAK13

Extension Lance (x2), Safety Goggles, Rotary Brush, Fixed Brush, Surface Brush, Drain Cleaner Kit, Fan Spray Nozzle, Angle Connector (x2), Hex Key.

For our full range of Car Shampoos and Detergents, see page 1170

1008 Pressure Washers - Engine Powered

130bar Pressure Washer 420ltr/hr 2.4hp Petrol Model No. PWM1300

220bar Pressure Washer 600ltr/hr 6.5hp Petrol Model No. PWM2500

220bar Pressure Washer 600ltr/hr Self-Priming 6.5hp Petrol Model No. PWM2500SP

Petrol powered with recoil starting. Suitable for commercial and domestic applications with 5m pressure hose, gun, lance and adjustable nozzle. Low-pressure liquid detergent injection system. Safety latch on trigger and automatic low-oil engine shutdown reduce risk of misuse and equipment damage. Unit stands on four sucker feet to prevent movement and has integral handle.

Petrol powered with recoil starting. Ideal for commercial applications with 5m pressure hose, 1m gun and lance and adjustable nozzle. Low-pressure liquid detergent injection system with provision for detergent bottle storage. Safety latch on trigger and automatic low-oil engine shutdown reduce risk of misuse and equipment damage. Unit stands on four legs, two with sucker feet to prevent movement and tilts back onto two pneumatic tyres for moving.

Petrol powered with recoil starting. Ideal for commercial applications with 5m pressure hose, pick-up hose, 1m gun

Manifold Pressure: 90bar(1305psi) Maximum Pressure: 130bar(1885psi) Flow Rate: 420ltr/hr Hose Length: 5m Nozzle: Adjustable Maximum Inlet Temperature: 50°C Engine Type: 4-Stroke, Single Cylinder, Petrol Engine Capacity: 87cc Engine Power: 2.4hp Starting: Recoil Fuel Tank: 1.6ltr Fuel Consumption: 0.8-1ltr/hr Weight: 20kg

Manifold Pressure: 175bar(2538psi) Maximum Pressure: 220bar(3190psi) Flow Rate: 600ltr/hr Hose Length: 5m Nozzle: Adjustable Maximum Inlet Temperature: 50°C Engine Type: 4-Stroke, Single Cylinder, Petrol Engine Capacity: 196cc Engine Power: 6.5hp Starting: Recoil Fuel Tank: 4ltr Fuel Consumption: 2.1-2.6ltr/hr Weight: 36kg

pump makes this unit fully portable for reservoir pick-up, so can be used where no mains pressure is available. Can draw clean water from water butts and tanks. Low-pressure liquid detergent injection system with provision for detergent bottle storage. Safety latch on trigger and automatic low-oil engine shutdown reduce risk of misuse and equipment damage. Unit stands on four legs, two with sucker feet to prevent movement and tilts back onto two pneumatic tyres for moving. Manifold Pressure: 175bar(2538psi) Maximum Pressure: 220bar(3190psi) Flow Rate: 600ltr/hr Hose Length: 5m Nozzle: 0°, 15°, 25°, 40° Fan & Detergent Maximum Inlet Temperature: 50°C Engine Type: 4-Stroke, Single Cylinder, Petrol Engine Capacity: 196cc Engine Power: 6.5hp Starting: Recoil Fuel Tank: 4ltr Fuel Consumption: 2.1-2.6ltr/hr Noise level: 109dB(A) Weight: 42kg

interchangeable nozzles.

5ltr Concentrated General Purpose Traffic Film Remover with Wax Model No. SCS003 General purpose concentrated TFR. Formulated with a

stage of cleaning. Biodegradable and additional inhibitor prevents scale build up and corrosion in pressure washer.

5ltr Jerry Can Green Model No. JC5MG For full details see page 349.

1010 Cloths & Sponges

10ltr Plastic Watering Can Model No. WCP10 Strong and durable 10ltr plastic watering can with easy Capacity:

10ltr

Long Handle Dip & Wash Brush Model No. CC52

Large Sponge Model No. CC64

Fine, split-top bristles gently loosen and brush away dirt.

General purpose bone-shaped sponge.

Long handle for access to hard to reach areas.

2pc Microfibre Brush Set Model No. CC84

2-in-1 Shaggy Microfibre Sponge Model No. CC76

2-in-1 Shaggy Microfibre Mitt Model No. CC77

one side, which are superb for removing dirt or general cleaning. Non-abrasive mesh cloth on the other side, ideal for removing bugs and obstinate grime.

Large Interior Brush Model No. CC61 mats and vinyl tops. Angled design to reach corners easily. Contoured rubber grip for added comfort and control.

for added comfort and control. Features long handled brush with removable handle, ideal for accessing hard to reach easy storage. Superb for removing dirt or general cleaning.

Aqua Flexi-Blade Model No. CC65

Double Compartment Wash Bucket Model No. CC75

Cuts drying time in half by removing excess water.

Features two compartments for clean and dirty water. Soft grip handle for added comfort.

Blade Length:

300mm

Genuine Chamois Model No. SEE BELOW Sheen Microfibre Cloth Model No. CC71

Forta Microfibre Cloth Model No. CC68

any surface. Double-sided cloth, particularly suitable for car interiors. Size:

400 x 400mm

Developed by professional detailers for fast removal of dust and hold dirt, dust and grease with just a little water. Size:

400 x 400mm

Genuine chamois leathers are a superior professional product, cut, conditioned, sized and 100% cod oil tanned. Genuine chamois is soft, supple and will leave surfaces lint and scratch free. Model No:

Size: 2.5ftÂ˛ 3.5ftÂ˛

Water Hose Accessories 1011

Upholstery/Body Cleaning Gun Model No. BS101 Designed for the car dealer and professional valeter, this essential tool cleans hard to reach areas such as seat runners, door trims, dashboards, upholstery and bodywork. Tornado action lifts dirt out of upholstery.

Water Spray Gun Model No. CC86 Manufactured from lightweight plastic with soft rubber grip rate control nozzle. Fitted with male inlet coupling.

Air Pressure: Air Consumption: Air Inlet Size:

101-116psi(7-8bar) 6.35cfm 1/4"BSP

Water Spray Gun - 9 Pattern Model No. CC79

faucet.

Water Coupling Bodies Model No. SEE BELOW Quick release female hose coupling. Auto Suitable for use with Ă&#x2DC;13mm garden hose. Model No:

Type: Standard

3-Way Water Coupling Connector Model No. CC88

Water Dispensing Gun Model No. SA928

3-Way hose connector manufactured using highly durable

Water Inlet Size:

Ă&#x2DC;1/2"

for connecting to standard quick couplers. Fitted with

Replacement Brush Head available, Model No.

1.7m Large Angled Flo-Thru Brush with Telescopic Handle Model No. CC50

3m Five Sided Flo-Thru Brush with Telescopic Handle Model No. CC953

Manufactured from tough, lightweight structural plastic that will not crack, bend or break. Super soft synthetic bristles are safe to use on any surface. Leak resistant aluminium

Manufactured from tough, lightweight structural plastic that will not crack, bend or break. Telescopic handle extends up to 3m. Five sided brush head for all-over coverage, prevents potential damage from objects butting up against the plastic brush head. Super soft synthetic bristles are safe to use on any surface. Leak resistant aluminium handle with

Handle Extension:

For all of our latest products and promotions visit www.sealey.co.uk

1300-3000mm

1012 Water Hoses & Reels Hose not included.

Water Hose with Fittings Model No. SEE BELOW

Garden Hose Trolley 60m Capacity Model No. GH60 Lightweight tubular steel frame with tough plastic composite wheels for easy manoeuvrability and two angled

Model No: GH15R/12 GH30R GH80R

Length: 15m 30m 80m

Hose Diameter: Ø13mm Ø13mm Ø13mm

Hose Capacity: Inlet/Outlet Diameter: Weight:

Ø13mm 2kg

20m Water Hose Reel Model No. WR92

Hand Cranked Hose Reel 80m Capacity Model No. GH80

Incorporates a soft grip handle for easy manoeuvrability or use pre-set holes for wall Hose Capacity: Inlet/Outlet Diameter: Maximum Pressure: Weight:

Ø13mm 300psi(20bar) 10kg

Length: Hose Diameter:

20m Ø13mm

Auto Rewind Control Garden Hose Reels Model No. SEE BELOW 18m Retractable Water Hose Reel Model No. RGH18

Length: Hose Diameter:

18m Ø13mm

Model No: Length: Hose Diameter:

RWH20 20m Ø13mm

RWH30 30m Ø13mm

Vacuum Cleaners 1013 10ltr 1000W Wet & Dry Vacuum Cleaners Model No. SEE BELOW High powered, lightweight, wet and dry units with blower facility. Constructed from high impact composite material with tool and hose storage points on head, and four castors to aid manoeuvrability. Ideal for vehicle cleaning, home cleaning and general workshop use. Supplied with 3-pin plug. Red Hi-Vis Green 1000W 230V 78m³/hr 10ltr 4.1kg Ø32mm

Motor Power: Supply: Drum Size: Weight: Vacuum Accessories Diameter: Filter Type:

Washable Cloth Filter for PC102, PC102HV Model No. PC102CF

Cloth No's PC102 and PC102HV.

10ltr 1000W Wet & Dry Vacuum Cleaner Model No. PC100 High powered, lightweight, wet and dry unit with blower facility. Constructed from high impact composite material with tool and hose storage points on head. Ideal for vehicle cleaning and general workshop use. Supplied with crevice and floor tools, cloth and foam filters, 2m cable and 3-pin plug. Motor Power: Supply:

1000W 230V 90m³/hr 10ltr 3.3kg Ø35mm

Drum Size: Weight: Vacuum Accessories Diameter: Filter Type:

Cloth & Foam

HEPA Cartridge Filter for PC150A Model No. PC150ACF particles. For use with Model No. PC150A.

15ltr 1000W Ash Vacuum Cleaner Model No. PC150A stoves, wood burners, BBQs, grills and more. A powerful 1000W motor provides great suction performance. With a 15ltr capacity, the lightweight tank features quick release hose allows the suction of ash up to a temperature of 40°C (100°F). Supplied with Model No. PC150ACF HEPA Cartridge Filter, Model No. PC150ACLF Cloth Filter, crevice tool and

Motor Power: Supply: Maximum Vacuum Pressure: Drum Size: Weight: Vacuum Accessories Diameter: Filter Type:

1000W 230V 185mbar 102m³/hr 15ltr 3.5kg Ø38mm Cartridge, Cloth

Cloth Filter for PC150A Model No. PC150ACLF Model No. PC150A.

For our full range of Floor Sweepers & Brooms, see page 1020 to 1021

Vacuum Cleaners 1017 77ltr Wet & Dry Industrial Vacuum Cleaner 2400W Stainless Steel Drum with Swivel Emptying Model No. PC477 High powered, lightweight industrial unit. Stainless steel

Motor Power: Supply: Drum Size: Weight: Vacuum Accessories Diameter: Filter Type: Replacement Cartridge Filter: Replacement Cloth Filter Assembly: Optional Squeegee:

Ã&#x2DC;38mm Cartridge, Cloth PC477.PF PC477.CF PC477AK1

30ltr Bagless Wet & Dry Industrial Vacuum Cleaner 1400W Stainless Steel Drum Model No. PC300BL

Motor Power: Supply: Maximum Vacuum Pressure: Drum Size: Weight: Vacuum Accessories Diameter: Replacement Foam Filters (Pack of 10): Replacement Panel Filter (Single):

PC300BLFF10 PC300BLPF

SUCTON POWER

Performance of Bagless Against Regular Models

BAGLESS

REGULAR

Full TANK CAPACITY

For our full range of Floor Sweepers & Brooms, see pages 1020 to 1021

1020 Floor Sweepers & Brushes Floor Sweepers Model No. SEE BELOW

further brushes set underneath the unit to easily lift debris

Model No: Operating Width: Hopper Capacity:

FSW70

FSW80

Metal Dustpan & Brushes Model No. BM26

Composite Dustpan & Brush Set Model No. BM04

8"(200mm) Scrubbing Brush Model No. BM27 24"(600mm) Floor Dust Sweeper Model No. BM18 Type/Fill: Head Size: Head Size: Replacement Head:

BM18R

Window Cleaning Wipers Model No. SEE BELOW

Model No:

Blade Length:

Hard/Bassine

Brooms, Brushes & Floor Squeegees 1021

Brooms Model No. SEE BELOW Comprehensive range of brooms available in hard and soft bristles. 12"(300mm) Models have handle support bracket and 24"(600mm) & 36"(900mm) models have metal handle strengthening support. Ideal for indoor or outdoor use. Model No. BM13H is suitable for heavy-duty use in yards and gardens. Model No:

Type/Fill: Soft/PVC Hard/Bassine Soft/Coco Hard/PVC Hard/Cane Hard/Bassine Soft/Coco Hard/Bassine Soft/Coco

Head Size: 11"(280mm) 12"(300mm) 12"(300mm) 13"(325mm) 13"(325mm) 24"(600mm) 24"(600mm) 36"(900mm) 36"(900mm)

24"(600mm) Bulldozer Yard Broom Model No. BM24HX Hard wearing, dual purpose, split-tip polypropylene and

secure and prevent damage to handle and resin block. Type: Fill: Head Size:

Hard + Soft PVC-Polypropylene 24"(600mm)

Workshop Floor Scrapers Model No. SEE BELOW with comfortable grip. 200mm 300mm

1500mm 1500mm

Floor Squeegees Model No. SEE BELOW

11" Hand Brushes Model No. SEE BELOW Manufactured from hardwood with a clear lacquered easy storage. Rubber

Wood

24"(600mm)

For our full range of Vacuums, see pages 1013 to 1016

11"(280mm) 11"(280mm)

Hard Soft

1022 Mops & Buckets

Squeeze Mop Model No. BM06 Plastic housed squeegee mop. Supplied with 8" super absorbent sponge. Fitted with handle mounted lever for wringing of sponge. Ideal for use on tiles, marble and other smooth surfaces. Replacement sponge available separately, Model No. BM06R.

350g Cotton Mop Model No. BM17 225g Pure Yarn Cotton Mop Model No. BM02

340g Pure Yarn Cotton Mop Model No. BM05

Highly absorbent, 100% pure yarn cotton head. Features straight grained wooden handle with galvanized steel socket.

Lightweight highly absorbent cotton head, ideal for cleaning wooden, ceramic, stone and vinyl flooring. Features detachable mop head and 1330mm plastic handle. Replacement mop head available separately, order Model No. BM17R.

Head Weight:

225g

340g

15ltr Mop Bucket - 2 Compartment Model No. BM07

13ltr Galvanized Mop Bucket Model No. BM08

Manufactured with 2 compartments featuring removable mop head wringer. Ideal for keeping clean water and dirty water separate while cleaning. Fitted with carry handles.

Manufactured from heavy-duty galvanized steel with a 13ltr capacity. Fitted with mop head wringer and carry handle. Ideal for domestic and industrial applications.

Capacity:

15ltr

13ltr

350g

450g Kentucky Mop Model No. BM03 Extra thick, highly absorbent, 100% cotton head. Features straight grained wooden handle with metal locking clip. Head Weight:

450g

14ltr Composite Bucket Model No. BM16 Manufactured from highly durable thick walled polypropylene with pouring spout. Fitted with plastic comfort grip handle. Capacity:

14ltr

Fitted with professional side press wringer.

20ltr & 36ltr Mop Buckets Model No. SEE BELOW Heavy-duty composite construction with detachable side press wringer and mop holder. Features Ă&#x2DC;50mm non-marking castor wheels for added manoeuvrability. Fitted with carry handle. Model No:

Capacity: 20ltr 36ltr

14ltr Galvanized Bucket Model No. BM10 Manufactured from heavy-duty galvanized steel with a 14ltr capacity. Fitted with wooden carry handle. Ideal for domestic and industrial applications. Capacity:

14ltr

Janitorial Trolley & Bins 1023

Janitorial Caddy/Tote Tray Model No. BM31

Janitorial Trolley Model No. BM30 Dimensions (W x D x H):

Dimensions (W x D x H):

Premium Powder-Free Disposable Nitrile Gloves Packs of 100 Model No. SEE BELOW

Model No: SSP55S SSP55L SSP55XL

Plain White Toilet Roll Pack of 4 x 9 (36 Rolls) Model No. TOL36

Size:

Ply: Type: Width: Sheets on Roll: Sleeve Quantity: Pack Quantity:

150m Blue Embossed 2-Ply Paper Roll - Pack of 6 Model No. BLU150 Ply: Type: Width: Length: Pack Quantity:

Heavy-Duty Hand Wipes Textured - Pack of 80 Model No. SSW80

General Purpose Hand Wipes Smooth - Pack of 150 Model No. SCW3

Quantity:

30ltr Stainless Steel Pedal Bin Model No. BM71

Capacity: Dimensions (W x D x H):

For our full range of Hand Wipes & Multipurpose Cloths, see pages 1166 to 1167

150

1024 Refuse/Wheelie Bins 100ltr Refuse/Wheelie Bins Model No. SEE BELOW Durable refuse/wheelie bins made from polypropylene. Bins

Model No:

Colour: Blue Green Red

Capacity: Dimensions (W x D x H):

100ltr Refuse/Wheelie Bins with Foot Pedal Model No. SEE BELOW Durable refuse/wheelie bins made from polypropylene

Model No:

Colour: Blue Green Red

Capacity: Dimensions (W x D x H):

Pedal & Cigarette Bins 1025

40ltr Stainless Steel Recycling Pedal Bin Model No. BM73

45ltr Plastic Pedal Bin Model No. BM60

Capacity: Dimensions (W x D x H):

Wall Mounting Cigarette Bin Model No. RCB01

Stainless Steel Wall Mounting Cigarette Bin Model No. RCB02 ®

Cigarette Floor Ashtray Model No. RCB04

® Size (W x D x H):

Size (W x D x H):

Cigarette Bin Model No. RCB07

Size (W x D x H):

8ltr Cigarette Ashtray & Litter Bin Model No. RCB06

Size (W x D x H):

For all of our latest products and promotions visit www.sealey.co.uk

1026 Workshop Matting

1240 x 1825mm Interlocking EVA Foam Workshop Mat Set with Hi-Vis Edges Model No. MIC1218Y3

920 x 920mm Interlocking Anti-Fatigue Matting Model No. MIC9292 Hard-wearing rubber anti-slip matting provides fatigue relief and insulation from cold Size: Thickness:

920 x 920mm 12mm

910 x 1980mm Anti-Fatigue Workshop Matting Model No. MCR0919

Size: Thickness:

1240 x 1825mm 10mm

1200 x 1800mm Interlocking EVA Foam Workshop Mat Set Model No. MIC1218

910 x 1980mm 8mm

1000 x 2500mm Ribbed Workshop Matting Model No. MCR1025

Size: Thickness:

Contents: Overall Dimensions (6 tile): Overall Dimensions (2 tile): Thickness:

Contents: Thickness:

11mm

1500 x 900mm Anti-Fatigue Workshop Matting Model No. MRM0915

1000 x 2500mm 3mm

Size (L x W): Thickness:

1500 x 900mm 14mm

Submersible Pond Pumps 1027 Submersible Pond Pumps Model No. SEE BELOW Suitable for creating garden water features. They also circulation which are necessary to maintain healthy plant

Stainless Steel Submersible Pond Pumps Model No. SEE BELOW and corrosion resistance. Suitable for creating garden water features. They also provide the important functions

Model No: Outlet Size OD: Maximum Output: Maximum Head: Motor Power: Supply: Cable Length:

WPP1100 A, B Ø13mm

WPP2300 A, B, C, D, E Ø19mm

WPP3500 A, B, C, D, E Ø19mm

1.1m

2.3m

230V 10m

WPP1750S A(x2), B, C Ø13mm

WPP3000S A, B, C Ø13mm

WPP3600S A, B, C Ø13mm

2.3m

3.2m

230V 10m

RCD Safety Adaptor 230V Model No. RCD981 Cuts power automatically to protect against electrocution. Suitable for all types of indoor and outdoor electrical appliances. Easy-to-use, two-button operation. No wiring needed - plugs straight into 13Amp socket. No need to remove from socket to reset unit. Supply: Maximum Load: Maximum Operating Current: Trip Speed: Trip Current:

Fountain Head Effects

A - Cascade

230V 3120W 13A 30ms 30mA

Model No: Outlet Size OD: Maximum Output: Maximum Head: Motor Power: Supply: Cable Length:

B - Water Bell

C - Foam Jet

D - Water Lily

For all of our latest products and promotions visit www.sealey.co.uk

E - Petunia

1028 Submersible Water Pumps Submersible Water Pumps Model No. SEE BELOW Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Available with or without automatic cut-out. Minimum water depth of just 20mm. Designed for clean water although these pumps will accept small particles up to 5mm. Suitable for the general transfer of water. LOW VOLTAGE SUBMERSIBLE TRANSFER PUMPS see pages 342 to 343

Model No: Cut-Out: Outlet OD: Maximum Output/Min: Maximum Head: Maximum Water Depth: Minimum Water Depth: Maximum Particle Size: Motor Power: Supply:

WPC100 Manual Ø32mm 100ltr(22gal) 6m 5m 20mm 5mm 250W 230V

WPC100A Automatic Ø32mm 100ltr(22gal) 6m 5m 20mm 5mm 250W 230V

WPC150 Manual Ø32mm 167ltr(36gal) 8m 7m 20mm 5mm 500W 230V

WPC150A Automatic Ø32mm 167ltr(36gal) 8m 7m 20mm 5mm 500W 230V

WPC235 Manual Ø38mm 208ltr(45gal) 8.5m 7m 20mm 5mm 750W 230V

WPC235A Automatic Ø38mm 208ltr(45gal) 8.5m 7m 20mm 5mm 750W 230V

WPC250 Manual Ø38mm 250ltr(55gal) 9.5m 5m 20mm 5mm 900W 230V

WPC250A Automatic Ø38mm 250ltr(55gal) 9.5m 5m 20mm 5mm 900W 230V

Automatic Submersible Dirty Water Pumps Model No. SEE TABLE

225ltr/min Automatic Stainless Submersible Dirty Water Pump Model No. WPS225A

250ltr/min Automatic Stainless Submersible Clean Water Pump Model No. WPS250A

Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Fitted with automatic cut-out. Minimum water depth of 40mm. Designed for operation in dense and dirty water. Suitable

Manufactured from corrosion resistant materials with stainless steel body and motor case. Fitted with automatic cut-out. Minimum water depth of 30mm. Designed for

Manufactured from corrosion resistant materials with stainless steel body and motor case. Fitted with automatic cut-out. Minimum water depth of 30mm. Designed for clean water although this pump will accept small particles up to

and the general transfer of water and dense liquids.

transfer of water and dense liquids.

KEEP SAFE! Always use an RCD device. See page 1027 for details.

Model No: Cut-Out: Outlet OD: Maximum Output/Min: Maximum Head: Maximum Water Depth: Minimum Water Depth: Maximum Particle Size: Motor Power: Supply:

WPD133A Automatic Ø32mm 133ltr(30gal) 5m 7m 40mm 30mm 400W 230V

WPD235A Automatic Ø38mm 217ltr(47gal) 8m 7m 40mm 35mm 750W 230V

WPS225A Automatic Ø38mm 225ltr(49gal) 7.5m 5m 30mm 15mm 750W 230V

WPS250A Automatic Ø38mm 250ltr(54gal) 8m 7m 30mm 5mm 600W 230V

Submersible Water Pumps 1029

Automatic Submersible Water Pumps Model No. SEE BELOW

225ltr/min Automatic Submersible Dirty Water Pump Model No. WPD235P

225ltr/min Automatic Stainless Submersible Dirty Water Pump Model No. WPS225P

Manufactured from heavy-duty corrosion resistant materials with stainless steel motor case and polypropylene

Manufactured from corrosion resistant materials with polypropylene base cover, stainless steel body and motor

be set at multiple heights using an innovative cable

water depth of 45mm. Designed for operation in dense and dirty water with a maximum particle size of 35mm. Suitable

mounting bracket. Minimum water depth of just 5mm. Designed for clean water although these pumps will drainage of cellars, sinks, cisterns, baths and the general transfer of water.

Designed for operation in dense and dirty water with a drainage of cellars, sinks, cisterns, baths and the general transfer of water and dense liquids.

and the general transfer of water and dense liquids.

in clean water.

417ltr/min High Flow Automatic Submersible Dirty Water Pump Model No. WPD415 Manufactured from heavy-duty corrosion resistant materials with stainless steel motor case and polypropylene base cover. Capable of operating in dense and dirty water with a

cellars, sinks, cisterns, baths and the general transfer of water and dense liquids.

Model No: Cut-Out: Outlet OD: Maximum Output/Min: Maximum Output/hr: Maximum Head: Maximum Water Depth: Minimum Water Depth: Maximum Particle Size: Motor Power: Supply:

WPC100P Automatic Ø32mm 100ltr(22gal) 6000ltr(1320gal) 6m 7m 5mm 5mm 250W 230V

WPC150P Automatic Ø32mm 183ltr(40gal) 11000ltr(2420gal) 8.5m 7m 5mm 5mm 550W 230V

217ltr/min Automatic Submersible Clean & Dirty Water Pump Model No. WPCD215 foldaway feet which convert the pumps’ usage between clean and dirty water. The pump operates in dirty water up to a particle size of 30mm with the feet extended out. With the drainage of cellars, sinks, cisterns, baths and the general transfer of water and dense liquids.

WPC235P Automatic Ø38mm 217ltr(48gal) 13000ltr(2860gal) 8.5m 7m 5mm 5mm 750W 230V

WPD235P Automatic Ø38mm 225ltr(50gal) 13500ltr(2970gal) 8m 7m 45mm 35mm 750W 230V

WPS225P Automatic Ø38mm 225ltr(50gal) 13500ltr(2970gal) 8m 7m 45mm 35mm 750W 230V

For our full range of Cable Reels, see pages 796 to 797

WPD415 Automatic Ø51mm 417ltr(92gal) 25000ltr(5500gal) 11m 7m 53mm 40mm 1300W 230V

WPCD215 Automatic Ø38mm 217ltr(48gal) 13000ltr(2860gal) 8m 7m 5mm 5/30mm 750W 230V

1030 Submersible Water Pumps

9 Stage 55m Head Borehole/Deep Well Pump Model No. WPW9355

Minimum Water Depth: 2mm

Manufactured from high impact stainless steel for added durability and corrosion resistance. Ideal for installing in traditional wells, clean water deposits, boreholes and garden irrigation systems. Nine stage pump enables high

117ltr/min Automatic Low Level 2mm Submersible Water Pump Model No. WPL117A Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Fitted with automatic cut-out. Puddle pump with minimum water Designed for clean water although this pump will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water. Cut-Out: Outlet OD: Maximum Output/min: Maximum Head: Maximum Water Depth: Minimum Water Depth: Maximum Particle Size: Motor Power: Supply:

Automatic Ø32mm 117ltr(26gal) 8m 7m 2mm 5mm 400W 230V

50ltr/min Submersible Water Butt Pump Model No. WPB50A

Cut-Out: Outlet OD: Maximum Output/min: Maximum Head: Number of Stages: Motor Power: Supply: Cable Length:

Manual Ø38mm 93ltr(20gal) 55m 9 1000W 230V 22m

Manufactured from corrosion resistant materials with a stainless steel motor case and Noryl® base cover. Ideal for pumping water straight from a water butt directly onto your garden. Supplied with a two piece aluminium swan snap on connector. Cut-Out: Outlet OD: Maximum Output/min: Maximum Head: Maximum Water Depth: Minimum Water Depth: Maximum Particle Size: Motor Power: Supply:

Automatic Ø19mm 50ltr(13gal) 10m 5m 50mm 0.5mm 350W 230V

92ltr/min 40m Head Automatic Submersible Stainless Water Pump Model No. WPS92A Manufactured from corrosion resistant materials with stainless steel body and motor case. Maximum head of 40m makes this unit ideal for wells. Fitted with automatic cut-out. Minimum water depth of 32mm. Designed for clean water although these pumps will accept small particles up to cisterns, baths and the general transfer of water.

10m Layflat Water Hoses Model No. SEE BELOW Suitable for water discharge only. Model No: LFH1025 LFH1032 LFH1038 LFH1050

Length: 10m 10m 10m 10m

Hose Diameter: Ø25mm Ø32mm Ø38mm Ø50mm

Cut-Out: Outlet OD: Maximum Output/min: Maximum Head: Minimum Water Depth: Maximum Water Depth: Maximum Particle Size: Motor Power: Supply:

Automatic Ø32mm 92ltr(20gal) 40m 32mm 7m 0.5mm 1000W 230V

Water Pumps, Inlet Filters & Hoses 1031

Surface Mounting Water Pumps Model No. SEE RIGHT Manufactured from heavy-duty corrosion resistant materials in either stainless steel or polypropylene. Suction pump suitable for drawing brackish water up to 8m. Includes

Model No: Cut-Out: Outlet: Maximum Output/min: Maximum Head: Maximum Suction Height: Maximum Particle Size: Motor Power: Supply:

WPS060 Manual 1"BSP 50ltr(11gal) 35m 8m 1mm 650W 230V

WPS062S Manual 1"BSP 55ltr(12gal) 38m 8m 1mm 800W 230V

Model No: Cut-Out: Outlet: Maximum Output/min: Maximum Head: Maximum Suction Height: Maximum Particle Size: Motor Power: Supply:

WPB050 Automatic 1"BSP 50ltr(11gal) 35m 8m 1mm 600W 230V

WPB062S Automatic 1"BSP 55ltr(12gal) 38m 8m 1mm 800W 230V

Ø50mm Water Pump 5.5hp Petrol Model No. EWP050 Economically designed petrol powered water pump with recoil starting. Suitable for on site applications where mains power supply is not available. Featuring Ø50mm inlet/outlet 600ltr/min of water. Fitted onto frame with high density rubber shock absorbers, frame also aids with protection from accidental damage. Motor Power: Motor Type: Inlet Diameter: Outlet Diameter: Maximum Output/min: Maximum Head: Maximum Suction Head: Maximum Tank Capacity: Noise Rating LwA: Dry Weight: Dimensions:

5.5hp 4-Stroke/Unleaded Ø50mm Ø50mm 600ltr 26m 8m 3.6ltr 99dB(A) 27kg 477 x 385 x 417mm

Ø50mm x 5m Solid Wall Suction Hose for EWP050 Model No. EWP050SW Solid wall hose for use on suction side of water pumps. For use with Model No. EWP050. Length: Size ID/OD:

5m Ø50/60mm

Surface Mounting Booster Pumps Model No. SEE RIGHT Manufactured from high impact thermoplastic material or stainless steel for added durability. Ideal for boosting or maintaining water pressure within the home or garden water supplies. Fitted with for lifting water up to 8m.

Solid Wall Suction Hoses Model No. SEE BELOW

Inlet Filters for Surface Mounting Pumps Model No. SEE BELOW

Solid wall hoses for use on suction side of water pumps. Suitable for use with Model No’s WPS060, WPS062S, WPB050 and WPB062S.

brands of surface mounting pumps. Includes two female to male adaptors.

Model No: WPS060HS WPS060HL

Length: 4m 7m

Size (ID/OD): Ø25/30mm Ø25/30mm

Model No:

Capacity: 1ltr 2ltr

Applications: WPB050, WPS060 WPB050, WPS060, WPS062S, WPB062S

For our full range of Garden Hoses & Accessories, see pages 1011 to 1012

1032 Broadcast Spreaders

27kg Lightweight Walk Behind Broadcast Spreader Model No. SPB27W

37kg Walk Behind Broadcast Spreader Model No. SPB37W

57kg Walk Behind Broadcast Spreader Model No. SPB57W

Manufactured with a strong tubular steel frame and polypropylene dispensing hopper. Fitted with nylon gear and adjustable feed system. Sprays in 360째 motion to cover a large area. Suitable for a variety of horticultural agents including grit, seed, salt, fertilizer and weed killer.

Manufactured with a strong tubular steel frame and polypropylene dispensing hopper. Fitted with nylon gear, rain cover, pneumatic tyres and adjustable feed system.

Manufactured with a strong tubular steel frame and polypropylene dispensing hopper. Fitted with aluminium gear, rain cover, pneumatic tyres and adjustable feed

unwanted contaminants. Sprays in 360째 motion to cover a large area. Suitable for a variety of horticultural agents including grit, seed, salt, fertilizer and weed killer.

to cover a large area. Suitable for a variety of horticultural agents including grit, seed, salt, fertilizer and weed killer.

Capacity (Weight): Capacity (Volume): Spread: Weight: Dimensions (W x D x H):

27kg 16ltr 3-3.6m 5.5kg 460 x 810 x 765mm

37kg Walk Behind Stainless Steel Broadcast Salt Spreader Model No. SSB37W Manufactured with a strong tubular steel frame and polypropylene dispensing hopper. Features corrosion resistant, stainless steel feed system ideal for spreading salt and grit. Fitted with nylon gear and adjustable feed system. Sprays in 360째 motion to cover a large area. Suitable for a variety of horticultural agents including grit, seed, salt, fertilizer and weed killer. Capacity (Weight): Capacity (Volume): Spread: Weight: Dimensions (W x D x H):

37kg 29ltr 3-3.6m 10.44kg 550 x 940 x 860mm

37kg 29ltr 3-3.6m 10.4kg 535 x 940 x 820mm

57kg 60ltr 3-3.6m 17.6kg 790 x 1060 x 890mm

Tow Behind Broadcast Spreaders Model No. SEE BELOW Manufactured with a strong tubular steel frame and polypropylene dispensing hopper. Pin hitch design attaches to ride-on lawnmowers, can be converted to ball hitch using Model No. TB36*. Fitted with aluminium gear, rain cover, contaminants. Sprays in 360째 motion to cover a large area. Suitable for a variety of horticultural agents including grit, seed, salt, fertilizer and weed killer. Model No: Capacity (Weight): Capacity (Volume): Spread: Weight: Dimensions (W x D x H):

SPB57T 57kg 60ltr 3-3.6m 11.6kg 680 x 980 x 790mm

SPB80T 80kg 88ltr 3-3.6m 24kg 880 x 1350 x 965mm

1034 Sprayers & Grit/Salt Boxes

16ltr Backpack Sprayer Model No. SS4

1.5ltr Hand Pressure Sprayer Model No. SS1

Pressure Sprayers Model No. SEE BELOW

including water, herbicides, pesticides, insecticides, fungicides and solvent-free preservative treatments. Features ergonomic handle and pressure relief valve. Fitted with adjustable nozzle to switch between mist and jet settings.

pesticides, insecticides, fungicides and solvent-free preservative treatments. Metal lance with adjustable nozzle which can be switched between mist and jet settings. Fitted with adjustable shoulder strap and pressure relief valve.

Capacity:

1.5ltr

Model No: Capacity:

SS2 5ltr

SS3 8ltr

Designed for extensive use around the garden, greenhouse and vegetable plots. Suitable for use with most garden chemicals including pesticides, herbicides and solvent-free preservatives. Manufactured from heavy-duty polypropylene. Supplied with four interchangeable spray nozzles and lockable trigger designed for extended use. simply reversing the shoulder straps. Capacity:

16ltr

Grit & Salt Storage Boxes Model No. SEE BELOW Manufactured from hard-wearing polyethylene. Ideal for indoor and outdoor storage of grit, sand and salt. Angled lid

Model No: Capacity: Dimensions (W x D x H): Weight:

GB02 130ltr 850 x 500 x 750mm 12kg

GB03 200ltr 1005 x 590 x 855mm 16kg

110ltr Grit & Salt Storage Box Model No. GB01 Manufactured from hard-wearing polyethylene. Ideal for indoor and outdoor storage of grit, sand and salt. Angled large opening for easy access. Capacity: Dimensions (W x D x H): Weight:

110ltr 650 x 500 x 570mm 8kg

75ltr Grit/Salt Mobile Storage Cart Model No. GB04 Manufactured from hard-wearing chemical and weather resistant polyethylene. Features a 75ltr capacity storage tank ideal for a variety of materials including grit, salt, sand, logs and oil absorbents. Fitted with composite wheels and ergonomic handle for easy manoeuvrability. Large clip securely holds lid open to provide easy access. Angled lid Capacity: Dimensions (W x D x H): Weight:

75ltr 435 x 590 x 1070mm 11kg

Flexi-Tubs & Wheelbarrows 1035

Heavy-Duty Flexi-Tubs Model No. SEE BELOW

Model No: Colour: Maximum Capacity: Dimensions (W x D x H): Base Size:

SFT40B

65ltr Galvanized Wheelbarrow Model No. WB65

85ltr Wheelbarrow Model No. WB85

Capacity:

SFT40Y

300kg Trailer/Hand Cart Model No. TBB300

Capacity: Tyre Size: Trailer Bed Size (Internal): Length: Width: Depth: Overall Height:

For our full range of Tarpaulins, see page 1067

1036 Snow Clearing Equipment

General Purpose Shovels with 900mm Handles Model No. SEE BELOW

Shovel with 710mm Wooden Handle Model No. SH710 Tough, pressed carbon steel shovel head tempered for extra strength. Fitted with hardwood ash handle. Manufactured to BS 3388. Length: Handle: Blade:

1020mm 710mm 260 x 340mm

Heavy-duty spark-free shovels with choice of shaft and YD handle. Large 365 x 470mm composite head ideal for use with snow, wood chips, compost, grain and debris.

Snow Shovels Model No. SEE BELOW

Model No: Length: Handle: Shaft Type: Head Dimensions:

Model No: Length: Head Dimensions:

SS01 1370mm 900mm Metal 365 x 470mm

SS02 1370mm 900mm Hardwood 365 x 470mm

Lightweight and durable shovels with forged metal shaft and YD handle. Ideal for use in adverse weather conditions. SS05 1360mm 395 x 310mm

SS06 1440mm 545 x 380mm

Scraper and brush can be connected to telescopic handle.

3pc Auto Snow Kit Model No. SSK3 Lightweight, easy-to-use emergency snow kit. Ideal for use in adverse weather conditions. Three position telescopic aluminium tubular shaft with composite handle. Attachments comprise heavy-duty snow shovel, ice scraper and multi-angle brush. Supplied in carry bag, disassembled for easy storage. Contents: Shovel, Ice Scraper, Multi Angle Brush, Telescopic Shaft/Handle Shovel Head (W x D): 245 x 345mm

590mm Folding Shovel Model No. SS03 Manufactured with a strong nylon handle and solid carbon steel head, powder coated for resistance to corrosion. Ideal for use in adverse weather conditions. Lightweight and durable design featuring twist and tighten locking system for easy assembly. Supplied in pouch for easy storage. Length (Folded): Length (Unfolded): Head Dimensions:

240mm 590mm 155 x 220mm

4 SMD LED USB Rechargeable Beanie Hat Model No. LED185 Warm and comfortable beanie hat with a removable SMD spotlight. Features three light settings - full light (100%) medium light (75%) and low light (50%). Positioning of the Removable lamp is chargeable via a USB port. Powered by a rechargeable 3.7V 300mAh Lithium-Polymer battery.

Vehicle Recovery Tracks & Equipment 1037

800mm Vehicle Traction Track Model No. VTR02 Heavy-duty vehicle traction track designed to prevent wheels spinning on snow, sand and mud. Flexible PVC design allows track to sit smooth against uneven surfaces. Fitted with galvanized steel cable and deep ribbed slatted cleats providing maximum grip. Each track can support a maximum safe working load of 3.5tonne. Supplied as singles in canvas storage pouch. Length: Width: Safe Working Load:

800mm 220mm 3.5tonne

600mm Vehicle Traction Tracks - Pair Model No. VTR01 Designed to prevent wheels spinning on snow, sand and mud. Manufactured from heavy-duty composite material with metal hinges for grip on uneven surfaces. Honeycomb cleats provide maximum grip in hard to get out of places. Sold in pairs that fold away for easy storage. Length: Width: Safe Working Load:

600mm 180mm 2tonne

Hand Power Pullers Model No. SEE BELOW These hand operated devices are perfect for moving vehicles, logs, machines and other heavy objects. Vehicles must be in a condition capable of acting as a rolling load within the rated capacity. Both models are delivered ready for use with cable already installed safety device and double ratcheting mechanism for applying the load evenly and with

Car Boot Organizers Model No. SEE BELOW

zinc chrome plated for long term corrosion resistance. Model No: Capacity: Breaking Strain: Chassis Thickness: Gear/Pawl Type: Cable Diameter/Length: Number of Hooks:

HP1000 1000kg 2000kg 3mm Double/Single Ă&#x2DC;4.8mm/2.6m 2

HP1500 1500kg 4000kg 6mm Double/Double Ă&#x2DC;5mm/3m 3

Tough and durable polyester construction. Ideal for storage in cars, 4x4s and SUVs. Features two large compartments, plus additional pockets. Fitted with two carry handles and folds unit from moving while in transit. Model No:

Size (W x D x H): 590 x 350 x 300mm 600 x 360 x 310mmm

For our full range of Water Containers, see page 348

Outer Pockets: 2 10

Inner Compartments: 2 2

1038 Log Splitting Tools Horizontal Foot Operated Log Splitter Model No. LS450H Heavy-duty steel construction with adjustable foot pedal, exerting a splitting force of up to 1.2tonne. Minor assembly required. Folds down for easy storage. Maximum Log Diameter: Maximum Log Length: Maximum Load Pressure: Overall Size (W x D x H): Weight:

Ø250mm 450mm 1.2tonne 370 x 835 x 520mm 9.5kg

85W Chainsaw Blade Sharpener Quick Locating Model No. SMS2002C Quick, easy and safe way to sharpen a chainsaw blade. Fitted with a ±35° tilting vice. Will bring life back to blade, enabling safer cutting and limiting snagging. Motor Power: 85W - 230V Free Speed: 4800rpm Wheel Diameter: Ø100mm Angle Adjustment: ±35° Chain Sizes: 375 Pitch ‘S’ BL, 404 Pitch ‘S’, 3/8 LP ‘C’ STD, NK, BL, 325 Pitch ‘C’ Replacement Blade: SMS2002C.B Weight: 2.5kg

Heavy-Duty Log Stand Ø230mm Capacity Model No. LC300ST storage and transportation. Holds logs up to Ø230mm. Compatible with chain saw use for ease and safety. Overall Size Open (W x D x H): Overall Size Folded (W x D x H): Maximum Log Diameter: Weight:

440 x 480 x 930mm 440 x 90 x 690mm Ø230mm 10.3kg

Axes with Fibreglass Shaft Model No. SEE BELOW Manufactured from hardened and tempered high quality carbon steel. Precision ground heads with polished cutting edges. Fibreglass shaft with shock-absorbing rubber grip for comfort and control. Manufactured and tested to BS 2945:1995. Includes blade cover. Weight: Weight:

AX96 560g(20oz) AX97 2kg(4.5lb)

Vertical Hand Operated Log Splitter Model No. LSH180V

Folding Log Rack Model No. LC800ST

A safe and simple substitute for an axe. Designed to take the backache and danger out of splitting logs. Hand powered, with up to 10tonne of splitting force. Suitable for small to medium sized logs. Easily assembled, transported and stored. No maintenance required.

Folding log rack with innovative serrated edges to safely

Maximum Log Length: Maximum Load Pressure: Overall Size (W x D x H): Weight:

Unfolded Size: Folded Size: Load Capacity: Maximum Log Diameter:

500mm 10tonne 160 x 60 x 1780mm 8.5kg

from corrosion resistant chromed steel, strong and sturdy, but light enough to be easily moved. 780 x 860 x 780mm 780 x 80 x 1000mm 150kg Ø250mm

Log Splitters 1039

4tonne Log Splitter 370mm Capacity Model No. LS370H

5tonne Log Splitter 520mm Capacity Model No. LS520H

and up to 4tonne of pressure. Splits logs almost instantly upon contact, keeping labour and work time to a minimum. Fitted with a two handed safety operation, push-button and lever.

and up to 5tonne of pressure. Splits logs almost instantly upon contact, keeping labour and work time to a minimum. Fitted with a two handed safety operation, push-button and lever.

Maximum Log (L x Ø): Maximum Load Pressure: Motor Power: Overall Size (W x D x H): Weight:

370 x Ø250mm 4tonne 1500W - 230V 750 x 250 x 420mm 37kg

520 x Ø250mm 5tonne 2200W - 230V 940 x 270 x 510mm 42kg

Horizontal Log Splitter Stand Model No. LS520HST Powder coated steel frame for added corrosion resistance. Splitter (5tonne 520mm Capacity). Labour and work time are kept to a minimum by creating a suitable working height. Attaching the wheels from Model No. LS520H enables easy

8tonne Vertical Type Hydraulic Log Splitter 575mm Capacity Model No. LS575VH

5.5tonne Vertical Type Log Splitter 1050mm Capacity Model No. LS1050V

Safe and easy way to split logs, producing up to 8tonne of pressure. Seven tier wedge system allows workpiece to be as near to wedge as possible, therefore minimising splitting time. Operated by foot pump requiring a maximum of 15 strokes to capacity (without load) for easy and fast splitting.

Safe and easy way to split logs, producing up to 5.5tonne of pressure. Three tier table system and adjustable wedge allows workpiece to be as near to wedge as possible minimising splitting time. Fitted with a two handed safety operation, twin pull-in and push-down levers.

Tier Log Lengths: 300, 350, 400, 450, 500, 550, 575mm Maximum Log Diameter: Ø160mm Vertical Ram Travel: 158mm Maximum Load Pressure: 8tonne Overall Size (W x D x H): 285 x 540 x 1040mm Weight: 30kg

Tier Log Lengths: Maximum Log Diameter: Vertical Ram Travel: Maximum Load Pressure: Motor Power: Overall Size (W x D x H): Weight:

Height (without Model No. LS520H): Height (with Model No. LS520H): Weight:

540, 790, 1050mm Ø320mm 500mm 5.5tonne 3000W - 230V 565 x 840 x 1520mm 97kg

For For allour of our full latest rangeproducts of Galvanised and promotions Sheds, see visit pages www.sealey.co.uk 1076 to 1077

740mm 1250mm 7kg

1040 Outdoor Furniture

16 LED Parasol Lamp Model No. GL59

10ltr Collapsible Water Container Model No. CWC10 Collapsible water container made from tough and durable low density polyethylene. Features a single seam design providing added strength and added protection against down for easy storage. Ideal for a variety of applications including camping and garden work. Capacity: Size Collapsed (W x D x H): Size Expanded (W x D x H):

10ltr 200 x 200 x 20mm 200 x 200 x 200mm

Folding Chair Model No. GL85 Folding composite chair, ergonomically designed for extra comfort and support. Easily opened and folded, powder coated sturdy steel frame. Suitable for indoor or outdoor use. Ideal for home, workshops, picnics or camping. Dimensions Open (W x D x H):

490 x 530 x 840mm

1.8m Portable Folding Table Model No. GL86 Folding table with carry handle for portability. Tough and weather resistant composite surfaces with corrosion resistant powder coated steel fold away legs. ‘Drop Lock’ hinges prevent collapse for added security. Suitable for indoor or outdoor applications. Dimensions Open (W x D x H): Dimensions Folded (W x D x H):

1830 x 740 x 745mm 915 x 740 x 100mm

Portable Folding Table & Bench Set Model No. GL87 Folding legs on table and bench seats, which store within folded table for easy portability. Weather resistant composite surfaces. Powder coated steel frames. ‘Drop Lock’ hinges protect against collapse for added safety. Functional and versatile, occupying little storage space when not in use. Table Size (W x D x H): Bench Size (W x D x H):

1130 x 680 x 730mm 950 x 230 x 420mm

support beams, ranging from Ø30mm to Ø45mm. Spring loaded ribbed rubber grips strengthen the grip around the centre beam. Quick release button opens lamp for easy by three AA batteries (not included). LED Quantity: Fitting Diameter: Operating Time: Battery:

16 Ø30-45mm 6-8hr 3 x AA (not included)

Barbecues 1041

5 Function Barbecue Multi-Tool Model No. BBQ13

Barrel Type Charcoal BBQ Model No. BBQ03 Barrel style charcoal barbecue, powder coated with enamel

Cooking Area: Cooking Height: Overall Dimensions (W x D x H):

590 x 400mm 850mm 800 x 640 x 1040mm

Functions:

4 Burner Gas Barbecue Model No. BBQ10

Cooking Area: Gas Category: Heat Output: Overall Size (W x D x H):

700 x 420mm 1330 x 590 x 1120mm

5 Burner Gas Barbecue with Side Burner & Side Bowl Model No. BBQ11

Cooking Area: Gas Category: Heat Output: Overall Size (W x D x H):

800 x 420mm 1440 x 590 x 1120mm

For our full range of Water Containers, see page 348

1042 Ladders Trade Aluminium Step Ladders EN 131 Model No. SEE BELOW EN 131 Approved aluminium step ladders with 150kg capacity. Durable lightweight anodised aluminium alloy frame. Deep non-slip steps and wide platform with safety rail allow plenty of leg room for safe standing. Ribbed feet

Model No: ASL3S Treads: 3 Weight: 3.7kg Base Width: 415mm Maximum Capacity: 150kg Safety Rail Height: 1220mm Platform Height: 610mm

ASL5 5 4.7kg 440mm 150kg 1660mm 1050mm

ASL7 7 7.3kg 520mm 150kg 2080mm 1480mm

Kick Steps For our full range of Kick Steps, see page 1046.

Industrial Aluminium Step Ladders BS 2037 Model No. SEE BELOW

treads. Wide platform and high safety rail allow plenty of leg room for safe standing. Model No: AXL6 Treads: 6 Weight: 6kg Base Width: 480mm Maximum Capacity: 175kg Safety Rail Height: 1870mm Platform Height: 1230mm

AXL8 8 7.25kg 510mm 175kg 2320mm 1670mm

AXL10 10 8.8kg 560mm 175kg 2730mm 2120mm

AXL12 12 9.8kg 630mm 175kg 3190mm 2580mm

Important Note: There are three standards for ladders in the UK, Class 1, 2 and 3. EN 131 replaced BS 2037 Class 2. Confusion arises with the term â&#x20AC;&#x2DC;duty ratingâ&#x20AC;&#x2122;, which British Standards arrive at through consideration of frequency and general conditions of use. For consistency we industrial ladders. See table to the right for

Class

Type

Standard

Max. Static Duty Vertical Load Rating

Class 1 Industrial

BS 2037

175kg

130kg

Class 2

EN 131

150kg

n/a

BS 2037

125kg

95kg

Trade

Class 3 Domestic

Ladders 1043 Trade Aluminium Professional Fold-Flat Step Ladders EN 14183 Model No. SEE BELOW EN 14183 Approved 150kg capacity step ladders professionally manufactured with brushed aluminium frames. a large top step for added stability when working at height. Fitted with four rubber feet for added stability. Available in 2, 3 & 4 step versions. Model No: Treads: Safety Rail Height: Platform Height: Platform Size: Maximum Capacity:

APSL2 2 919mm 467mm 313 x 228mm 150kg

APSL3 3 1174mm 722mm 313 x 228mm 150kg

APSL4 4 1429mm 977mm 313 x 228mm 150kg

Aluminium Extension Combination Ladders EN 131 Model No. SEE BELOW Aluminium extension ladders manufactured to EN 131 standards. Ideal for the tradesman, these ladders can be used as a two section or three section extension and as a as a step and extension step ladder where stability and storage. Two larger models suitable to extend up to the apex of a house. Model No: Minimum Height: Maximum Extension: Maximum Reach: Maximum Capacity: Weight:

ACL307 2m 4.2m 5.1m 150kg 9.8kg

ACL3 2.6m 5.9m 6.8m 150kg 12.2kg

ACL312 3.4m 7.9m 8.8m 150kg 16.5kg

Health and Safety Executive

For our full range of Ladder Safety Accessories, see page 1048

Keep Safe Most ladder accidents are caused by human error, not by the ladders failing. The HSE website contains useful information including brochures enabling you to keep safe whilst working with ladders. Go online today to ensure you are safe at work or at home www.hse.gov.uk.

1044 Ladders Trade Fibreglass Step Ladders EN 131 Model No. SEE BELOW

Model No: Treads: Height: Maximum Capacity: Weight:

FSL5 4

FSL7 6

FSL10 9

Important Note

Trade Aluminium Telescopic Ladders EN 131 Model No. SEE RIGHT

Model No: Treads: Minimum Height: Maximum Height: Maximum Capacity: Weight:

ATL09

ATL11

ATL13

Ladders 1045 4-Way Trade Aluminium Folding Platform Ladder EN 131 Model No. AFPL1

F: Weight:

4-Way Aluminium Adjustable Height Folding Platform Ladder EN 131 Model No. AFPL2

Weight:

4-Way Trade Aluminium Adjustable Height Telescopic Ladder EN 131 Model No. AFPL3

Treads: Folded Depth: Folded Height: Width: Step Ladder Height Minimum/Maximum:

Minimum/Maximum: Extension Ladder Height Minimum/Maximum: Maximum Capacity: Weight:

For all Forofour ourfull latest range products of Safety and Products, promotions seevisit pages www.sealey.co.uk 910 to 925

1046 Platforms & Steps

2-Tread Aluminium Folding Platform EN 131 Model No. APS2E

2-Tread Trade Aluminium Folding Platform EN 14183 Model No. APS2

EN 131 Approved folding and portable aluminium platform with 150kg capacity. Large, ribbed non-slip platform and treads for safe and easy manoeuvrability. Durable aluminium alloy frame with ribbed feet provides extra stability. Safety locking catches on legs. Folds

EN 14183 Approved folding and portable aluminium platform with 150kg capacity. Large, ribbed non-slip platform and treads for safe and easy manoeuvrability. Durable aluminium alloy frame with ribbed feet provides extra stability. Safety locking catches on legs. Folds

Platform Size: Dimensions (W x D x H): Maximum Capacity: Weight:

800 x 300mm 1250 x 400 x 605mm 150kg 5.6kg

950 x 300mm 1280 x 495 x 500mm 150kg 7.2kg

Heavy-Duty Platform Safety Step Model No. KS5 Robust, lightweight platform safety step featuring a large 390 x 390mm step surface area. Features four-way access and anti-slip strips to aid stability when in use. Fitted with four non-slip pads on each corner to prevent movement when in use. Unit is brightly coloured and due to its angled design will not tip over, even when weight is on the edges making this model safe to work on. Top Step Size (W x D): Base Size (W x D): Step Heights: Maximum Capacity:

390 x 390mm 505 x 505mm 200, 380mm 150kg

Trade Step Stools EN 14183 Model No. SEE BELOW EN 14183 Approved steps with 150kg capacity tubular metal construction with composite feet for added stability. Features large anti-slip treads. Foam cushioned hand rail

Kick Steps Model No. SEE BELOW

easy storage and transportation. Model No: ASL2 Treads: 2 Top Step Height: 460mm Floor Area: 570 x 480mm Maximum Capacity: 150kg

ASL23 3 710mm 640 x 480mm 150kg

Model No: Material: Step Heights: Base Size: Maximum Capacity:

KS2 Composite 220, 420mm Ø440mm 150kg

KS1 Steel 220, 430mm Ø440mm 150kg

KS4 Composite 210, 430mm Ø430mm 150kg

Warehouse & Mobile Safety Steps 1047 Warehouse Steps Model No. SEE BELOW Heavy-duty warehouse steps manufactured from industrial strength aluminium. Fitted with non-slip treads, safety hand rails and cross braced frame for added strength and stability. Features large chequered top platform for extra grip and polyurethane wheels for easy manoeuvrability. Maximum capacity 150kg. Model No’s These products are delivered directly from our factory. Model No: WS3 WS4 WS5 WS6 WS7 WS8 WS9 WS10 WS11 WS12 WS13 WS14

Treads: 3 4 5 6 7 8 9 10 11 12 13 14

Platform Height: 740mm 980mm 1220mm 1450mm 1700mm 1940mm 2170mm 2410mm 2670mm 2900mm 3120mm 3400mm

Overall Height: 1320mm 1630mm 1880mm 2060mm 2310mm 2540mm 2790mm 3050mm 3330mm 3580mm 3810mm 4060mm

Overall Width: 480mm 510mm 530mm 560mm 580mm 610mm 640mm 660mm 690mm 710mm 740mm 760mm

Overall Depth: 790mm 910mm 1070mm 1190mm 1300mm 1470mm 1630mm 1800mm 1980mm 2130mm 2340mm 2540mm

Maximum Capacity: 150kg 150kg 150kg 150kg 150kg 150kg 150kg 150kg 150kg 150kg 150kg 150kg

Weight: 9.9kg 10.6kg 11.3kg 12.7kg 14.5kg 15.9kg 17.4kg 20kg 21.5kg 23.6kg 25kg 26.8kg

These products are manufactured to order and, due to the size, are delivered direct from our factory to all areas within the UK mainland. Please allow at least 15 working days for delivery and provide the full address, postcode, contact and telephone number for the place of delivery. Please be aware that additional carriage charges will apply to Scottish postcodes which are NOT AB, DD, DG, EH, FK, G, KA, KY, ML & TD for WS range and NOT AB, DD, DG, EH, G, ML & TD for MSS range. Deliveries to Northern Ireland, Republic of Ireland, Isle of Man, Isle have to be individually priced on application and are outside of our normal carriage paid terms.

Mobile Safety Steps Model No. SEE BELOW as a reminder to retract castors before climbing. 150mm Kick board on three sides of platform. Model No:

Ø400mm Wall Mounting Convex Mirror Model No. CM400 Convex mirror for improved visibility. Supplied with positioning. Ideal for use as a safety or security mirror. Size:

Ø400mm

MSS02 MSS03 MSS04 MSS05 MSS06 MSS07 MSS08 MSS09 MSS10 MSS11 MSS12 MSS13 MSS14 MSS15

Treads: 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Platform Height: 500mm 750mm 1000mm 1250mm 1500mm 1750mm 2000mm 2250mm 2500mm 2750mm 3000mm 3250mm 3500mm 3750mm

Tread (W x D): 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm 550 x 200mm

For our full range of Pallet Trucks, see page 1055

Platform (W x D): 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm 550 x 400mm

Overall Size (W x D x H): 650 x 590 x 1500mm 650 x 760 x 1750mm 650 x 910 x 2000mm 835 x 1270 x 2250mm 835 x 1360 x 2500mm 850 x 1450 x 2750mm 850 x 1575 x 3000mm 850 x 1730 x 3250mm 1000 x 1905 x 3500mm 1000 x 2070 x 3750mm 1000 x 2230 x 4000mm 1230 x 2470 x 4250mm 1230 x 2630 x 4500mm 1320 x 2795 x 4750mm

Weight: 20kg 28kg 32kg 55kg 62kg 70kg 78kg 90kg 98kg 105kg 116kg 125kg 130kg 138kg

1048 Loft Ladder & Ladder Safety Accessories

Ladder Stand-Off Model No. LAD002

Span Width:

2-Way Ladder Stand-Off Model No. LAD004

Span Width: Maximum Capacity:

Anti-Slip Ladder Mat Model No. ASLM1

3-Section Loft Ladder Model No. LFT03

Size (W x D x H): Weight:

Loft Opening (W x L): Maximum Height: Loft Clearance: Maximum Capacity:

Ladder Stabiliser Model No. LAD001 Ladder Roof Rack Clamps Model No. SLC2

Maximum Width:

Ladder Roof Hook Model No. LAD003

Ladder Tray (W x D): Overall Size (W x D x H):

Maximum Capacity:

Scaffold Tower & Ladder 1049 Platform Scaffold Tower EN 1004 Model No. SEE BELOW 7.15mtr

5.5mtr

3.8mtr

4-Way Aluminium Scaffold Ladder EN 131 Model No. ASCL2

B A

For our full range of Safety Products, see pages 910 to 925

1050 Platform Trucks

Platform Truck with Folding/Removable Sides Model No. CST806

Platform Truck with Folding/Removable Sides Model No. CST997 Heavy-duty steel with hinged mesh construction. Cushioned grip pull handle with smooth steering action for easy manoeuvrability. Steel centred pneumatic wheels allow transport over the toughest terrain. Drop-down sides, for for oversized items. Suitable for a variety of warehouse, Capacity: Wheel Size: Platform Height: Cart Size (Internal): Length: Width: Depth: Overall Height:

200kg Ø250 x 90mm 350mm 930mm 480mm 220mm 570mm

Heavy-duty rust resistant steel construction. Smooth steering action for easy manoeuvrability, with soft rubber gripped handle and pneumatic wheels for easy transportation over the toughest terrain. All four sides drop down using locking pin function for easy loading. Can also with additional removable storage tray for carrying smaller and domestic applications. Capacity: Wheel Size: Platform Height: Cart Size (Internal): Length: Width: Depth: Overall Height:

450kg Ø300 x 90mm 390mm 1120mm 560mm 300mm 650mm

Platform Truck with Removable Sides Model No. CST773 Welded construction with 15mm wood composite platform and two braked castors for easy manoeuvring and safe loading/unloading. Ideal for warehouse and industrial applications. Capacity: Platform Size: Platform Height: Side Height: Overall Width: Overall Length: Overall Height: Wheel Size:

300kg 1200 x 800mm 280mm 590mm 800mm 1420mm 1150mm Ø200 x 50mm

Platform Truck Model No. CST993

Folding Platform Trucks Model No. SEE BELOW

Rigid platform truck featuring heavy-duty wooden deck and for ease of storage. Suitable for a variety of warehouse, Model No: Capacity: Wheel Diameter: Platform (W x D): Platform Height: Overall Height:

CST991 150kg Ø100mm 465 x 725mm 140mm 815mm

CST992 300kg Ø125mm 605 x 910mm 185mm 870mm

Capacity: Wheel Diameter: Platform (W x D): Platform Height: Overall Height:

250kg Ø125mm 495 x 950mm 225mm 960mm

Sack Trucks 1051

150kg Interlocking Plastic Dolly Model No. CM150 Interlocking plastic dollies can be linked lengthways or sideways to allow the user to create the platform they need to move large or heavy items around the workplace with ease. Each dolly can hold up to 150kg of evenly spread weight. Injection mould plastic features non-slip pads which prevent load from slipping. The design of the dolly also allows for these to be stacked safely on top of each other (maximum ten high) when not in use. They also feature built-in carry handles to aid transportation and 75mm TPR double ball bearing castors for manoeuvrability.

Sold as singles

90kg Folding Sack Truck Model No. CST980 30kg Folding Aluminium Trolley Model No. CST30 Lightweight aluminium and composite construction, weighs just 1.3kg. Folds down for easy storage and transportation, yet unfolds to carry up to 30kg when required. Fitted with wide, easy-rolling wheels. Supplied with bungee strap to help secure load whilst in use. Capacity: Folded Size: Unfolded Size: Wheel Diameter: Weight:

30kg 430 x 260 x 120mm 910 x 260 x 370mm Ø75mm 1.3kg

70kg Compact Folding Aluminium Sack Truck Model No. ST33 Lightweight aluminium and composite construction, weighs just 3.8kg. Folds down for easy storage and transport, yet unfolds in seconds, carrying up to 70kg. Fitted with large, easy-rolling rubber wheels. Rubber grip handle for added comfort and control. Capacity: 70kg Folded Size: 720 x 480 x 65mm Unfolded Size: 990 x 480 x 420mm Wheel Diameter: Ø175mm

Lightweight aluminium frame, weighs only 7kg yet has a carrying capacity of 90kg. Folding steel foot plate and telescopic handle with spring release means that trolley can be packed away in seconds. Large back support makes light work of oversized loads. Fitted with Ø150mm wheels for easy-rolling over rough ground. Ideal for business and home use. Capacity: Height Folded: Height Extended: Width: Footplate Width: Footplate Depth: Wheel Diameter:

For details of our Corner Transport Dollies, see page 1055

90kg 720mm 1090mm 380mm 355mm 240mm Ø150mm

120kg Aluminium Sack Truck Model No. CST979 Lightweight aluminium construction, weighs only 6kg with a carrying capacity of 120kg. Fitted with Ø250mm pneumatic wheels for easy movement over rough terrain. Features composite grip handles for added comfort and stability. Capacity: Wheel Thickness: Height: Width: Platform Depth: Wheel Diameter:

120kg 90mm 1170mm 465mm 200mm Ø250mm

1052 Sack Trucks Sack Trucks with Pneumatic Tyres Model No. SEE BELOW Extra strong tubular steel frame construction. Steel centred pneumatic wheels allow transport over the roughest terrain. Range includes CST998 & CST999 include rubber hand grips.

150kg Sack Truck with Solid Tyres Model No. CST983 Strong tubular steel construction with welded joints. Heavy-duty wheels feature steel inserts for added strength and durability. Can be rested on handles for Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth:

Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth:

150kg Ø210mm 50mm 220mm

Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth:

300kg Ø250mm 90mm 1300mm 500mm 280mm

Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth:

200kg Ø250mm 90mm 1100mm 550mm 180mm

Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth:

300kg Ø250mm 90mm 1300mm 550mm 230mm

200kg Ø250mm 90mm 1190mm 545mm 255mm

Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth:

feature ‘P’ handle design which enables one-hand control leaving the other free to open doors etc.

250kg Ø250mm 90mm 220mm

Sack Trucks 1053

200kg Folding Sack Truck with Pneumatic Tyres Model No. CST801

150kg Foldable Toe Sack Truck with Pneumatic Tyres Model No. CST800

250kg Sack Truck with Foldable Toe Model No. CST990

Extra-strong tubular steel framework with heavy-duty pneumatic tyres allow transport of load over rough terrain. Features foldaway toe plate and height adjustable handles. Fitted with composite grip handles for added comfort and stability.

Manufactured from extra-strong tubular steel with heavy-duty pneumatic tyres allows transportation over rough terrain. Features foldaway toe plate providing

Extra-strong tubular steel frame construction. Steel centred pneumatic wheels allow transport over the roughest terrain. Features extra foldaway toe plate for added extension

drivers, farmers or builders.

delivery drivers, farmers or builders.

Capacity: Wheel Diameter: Wheel Thickness: Overall Width: Platform Depth: Handle Height Extended: Handle Height Non-Extended:

Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth: Standard/Extended

200kg Ø250mm 80mm 480mm 290mm 1165mm 810mm

Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth: Standard/Extended

250kg 3-in-1 Sack Truck Model No. CST989

150kg Stair Climbing Sack Truck Model No. CST985 Tubular steel construction gives 150kg maximum load capacity. Deep foot ensures cartons stay on trolley during transit. Fitted with solid rubber wheels. Handle design allows for delivery drivers and couriers. Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth:

150kg Ø250mm 90mm 1140mm 490mm 90/420mm

150kg Ø165mm 30mm 1300mm 510mm 230mm

Tubular steel framework with heavy-duty pneumatic tyres allows transport of load over rough terrain. Suitable for use as a traditional sack truck or at 45° with support castors in position. For maximum load carrying capability use in horizontal position. Features fold out load restrainer for use when truck is in horizontal position. Adapts between Capacity: Wheel Diameter: Wheel Thickness: Height: Overall Width: Platform Depth:

250kg Ø250mm 90mm 1275mm 600mm 300/620mm

For our full range of Drum Handling Trolleys, see pages 354 to 356

250kg Ø250mm 90mm 1249mm 650mm 325/620mm

1054 Hydraulic Platform Trucks Hydraulic Platform Trucks Model No. SEE RIGHT Heavy-duty construction. All models fitted with four

foot pedal. Safety release mechanism positioned on handlebar for smooth controlled descent. All except Model No. HPT500 feature safety bars to prevent inadvertent lowering. Suitable for numerous garage, industrial and warehouse handling applications. Model No’s HPT150 HPT500 supplied with non-slip platform cover for added load security. May also be used as a mobile service bench.

Hydraulic Platform Truck High Lift 400kg Capacity Model No. HPT400H Heavy-duty construction. High lift version with 1350mm maximum platform height. Fitted with four composite hydraulic unit controlled by large rear mounted foot pedal. Safety release mechanism positioned on handlebar for smooth controlled descent. Suitable for numerous garage, industrial and warehouse handling applications. Supplied with non-slip platform cover for added load security. May also be used as a mobile service bench. Capacity: Minimum Platform Height: Maximum Platform Height: Platform Length: Platform Width: Wheel Diameter:

360mm 1350mm 910mm 500mm Ø125mm

Model No: Capacity: Minimum Platform Height: Maximum Platform Height: Platform Length: Platform Width: Wheel Diameter:

HPT150

HPT300

HPT500

HPT1000

225mm 700mm 705mm 450mm Ø100mm

270mm 770mm 820mm 520mm Ø125mm

280mm 860mm 815mm 500mm Ø125mm

430mm 1020mm 1015mm 510mm Ø150mm

Portable Access Ramp 450kg Capacity Model No. PAR01 Lightweight, durable access ramp. Ideal for transporting and rubber stoppers to prevent movement while in use. Features 600mm wide textured ramp surface providing Capacity: Dimensions (W x D x H):

680 x 680 x 120mm

Pallet Trucks 1055

Tandem loading rollers with sealed-for-life bearings all round.

Set of 4 Corner Transport Dollies 150kg Capacity Model No. CM4 Heavy-duty corner dollies manufactured from high quality steel with a maximum load weight of 150kg. Ideal for moving awkward rectangular loads and provides increased mobility in locations where normal material handling equipment cannot be used. Each as cabinets, desks and much more. Sold in sets of four. Capacity:

1150 x 525mm Pallet Truck - 2200kg Capacity Model No. PT2200 Heavy-duty truck suitable for warehouse and general handling duties. Polyurethane, non-marking wheels and tandem loading rollers with sealed-for-life bearings all round. Robust and durable galvanized hydraulic unit with chromed ram and piston for resistance to corrosion. Features euro pallet depth indicators. Capacity: Minimum Height: Maximum Height: Forks (Length x Overall Width): Fork Spread:

2200kg 85mm 200mm 1150 x 525mm 225mm

150kg

Pallet Truck Stop Model No. PTS1 Manufactured from non-slip durable rubber. Designed to secure pallet truck wheels to eliminate freight and vehicle damage due to unsecured pallet trucks while in transit. Ideal for delivery companies and other material handling applications. Overall Size (W x D x H): Weight:

300 x 360 x 47mm 1.74kg

1150 x 555mm Pallet Truck with Scales - 2000kg Capacity Model No. PT1150SC 1170 x 540mm High Lift Pallet Truck - 1000kg Capacity Model No. PT1170H Heavy-duty high lift pallet truck suitable for the loading/unloading of light commercial vehicles as well as warehouse/general handling duties. Features twin stabilisers for extra balance when at maximum lift and an ergonomic handle design for comfortable operation. Capacity: Minimum Height: Maximum Height: Forks (Length x Overall Width): Fork Spread:

1000kg 85mm 840mm 1170 x 540mm 225mm

Heavy-duty pallet truck suitable for warehouse and general handling duties. Features built-in weighing scales with an accuracy of Âą1kg. Six-digit, high contrast LCD display. Control panel has a tare function to allow for packaging weight. Scales powered by 4 x AA batteries allowing up to 70 hours of use. Automatic sleep mode ensures battery life is prolonged when not in use. Ergonomic handle for comfortable operation. Capacity: Minimum Height: Maximum Height: Forks (Length x Overall Width): Fork Spread: Display: Weighing Units: Battery:

For our full range of Pallet Racking, see page 875

2000kg 88mm 200mm 1150 x 555mm 200mm Six-Digit LCD Pounds, Kilograms 4 x AA (not included)

1060 Towing Accessories Mounting Plates Model No. SEE BELOW Single Socket Mounting Plate

Double Socket Mounting Plate

Bumper Protection Plates Model No. SEE BELOW

Size (W x H):

Tow Ball Assemblies & Accessories Model No. SEE BELOW

Size (W x D x H):

45mm

Tow Ball Covers Model No. SEE BELOW

Tow Ball Bolts & Nuts Model No. SEE BELOW

Magnetic Sign - â&#x20AC;&#x153;ON TOW" Model No. TB01T

25mm Tow Ball Spacer Block Model No. TB48 Size (W x H):

Towing Accessories 1061

Jockey Wheel & Ø35mm Clamp 150mm Solid Wheel Model No. TB371

Jockey Wheel & Ø50mm Clamp 200mm Solid Wheel Model No. TB37

Jockey Wheel & Ø48mm Clamp 260mm Pneumatic Wheel Model No. TB372

Heavy-duty jockey wheel with Ø35mm clamp. Ø150mm Steel wheel with solid rubber tyre. Zinc plated for added corrosion resistance.

Heavy-duty jockey wheel with Ø50mm clamp. Ø200mm Steel wheel with solid rubber tyre. Zinc plated for corrosion resistance.

Heavy-duty jockey wheel with Ø48mm clamp. Ø260mm Steel wheel with pneumatic tyre. Zinc plated for added corrosion resistance.

Capacity: Minimum Height: Maximum Height: Wheel Size:

80kg 515mm 725mm Ø150 x 24mm

150kg 580mm 810mm Ø200 x 45mm

150kg 630mm 860mm Ø260 x 80mm

Ø50mm Towing Hitch - 750kg Capacity Model No. TB36 Steel, lockable, towing hitch, E-Approved, accepts Ø50mm tow ball. Capacity:

Trailer Jack & Clamp 250mm Travel - 900kg Capacity Model No. TB373 Heavy-duty trailer jack with swivel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting. Capacity: Minimum Height: Maximum Height:

750kg

Lock & Key for Ø50mm Hitch Model No. TB36/LK

900kg 230mm 480mm

Breakaway Cables Model No. SEE BELOW Ø50mm Tow Ball Trailer Hitch Lock Model No. TB45

Ø50mm Tow Ball Lock Model No. TB38 to prevent towing away. Quick and easy to install. Non-corrosive.

Steel bar and cast steel body helps protect against trailer and caravan theft. Easy to install and remove. Supplied with three keys.

A legal requirement. Applies the handbrake on braked caravans and trailers in the event of accidental unhitching. Supplied with heavy-duty split ring and securing clip. PVC Coated for extra durability. Model No:

For our full range of Wheel Clamps & Steering Locks, see page 1078

Size: 1m x 2mm 1m x 3mm

1062 Ratchet Power Pullers Ratchet Power Pullers Model No. SEE RIGHT

IMPORTANT Hand power pullers are not designed or They are intended only as pulling/ tensioning devices and should be used

Model No: Capacity: Breaking Strain: Chassis Thickness: Gear/Pawl Type: Cable Diameter/Length: Number of Hooks:

HP1000

HP1500

WRP1600

WRP3200

Ratchet Power Pullers Model No. SEE RIGHT

Model No: Rated Capacity: Wire Rope Diameter: Wire Rope Length: Weight:

Ratchet Load Binders Model No. SEE BELOW

Model No: Working Load: Breaking Strength: Chain Size: Handle Length: Hook: Weight:

LB001

LB002

Double

Wire Rope Protective Cover Model No. WRD01

Size (W x H): Weight:

E-Approved Warning Triangle Model No. TB40

Size (W x H):

Manual Geared Winches 1063 Manual Geared Winches Model No. SEE BELOW Manufactured from hardened steel with a heavy plate chassis. Features a single or double gear mechanism for smooth and easy operation. Includes manual brake, allowing the user to adjust the restriction placed on the webbing or cable. Suitable for general and recovery operations. Three options available; with empty drum, with wire cable or with webbing strap, all in two capacities.

Model No: Capacity: Gear Ratio: Hub Diameter: Maximum Cable/Webbing Size: Handle Length: Weight:

Empty Drum

GWE1200M 540kg 4:1 Ø20mm Ø5.1mm x 10m (cable not included) 230mm 2.1kg

GWE2000M 900kg 4:1/8:1 Ø20mm Ø5.1mm x 10m (cable not included) 230mm 2.5kg

Wire Cable

GWC1200M 540kg 4:1 Ø20mm Ø5.1mm x 10m (cable supplied) 230mm 2.6kg

Webbing Strap

GWC2000M 900kg 4:1/8:1 Ø20mm Ø5.1mm x 10m (cable supplied) 230mm 3kg

GWW1200M 540kg 4:1 Ø20mm 50mm x 7m (webbing supplied) 230mm 2.6kg

GWW2000M 900kg 4:1/8:1 Ø20mm 50mm x 10m (webbing supplied) 230mm 3kg

Manual Geared Winches with Brake Model No. SEE BELOW Hardened steel gear with a heavy plate chassis. Includes an automatic brake system which stops the winch when more than 25kg of force is applied. Features a fully enclosed gearbox. Suitable for general and recovery operations. Three options available; empty drum, with wire cable or with webbing strap, all in two capacities.

Model No: Capacity: Gear Ratio: Hub Diameter: Maximum Cable/Webbing Size: Handle Length: Weight:

Empty Drum

GWE1200B 540kg 4.3:1 Ø45mm Ø4mm x 10m (cable not included) 200mm 2.9kg

GWE2000B 900kg 8.8:1 Ø63mm Ø6.35mm x 15m (cable not included) 250mm 5.8kg

Wire Cable

GWC1200B 540kg 4.3:1 Ø45mm Ø4mm x 10m (cable supplied) 200mm 3.7kg

Webbing Strap

GWC2000B 900kg 8.8:1 Ø63mm Ø6.35mm x 15m (cable supplied) 250mm 8.6kg

GWW1200B 540kg 4.3:1 Ø45mm 50mm x 6m (webbing supplied) 200mm 3.7kg

GWW2000B 900kg 8.8:1 Ø63mm 50mm x 8m (webbing supplied) 250mm 6.4kg

Anti-Slip Gloves - Pair Model No. SSP33

PVC Anti-Slip Nylon Knitted Gloves - Pair Model No. SSP51

EVA Foam with TPR Cap Knee Pads - Pair Model No. SSP79

BS EN 388 - Spun nylon glove with interlocking criss-cross coating. Ideal for handling cartons, glass and other items

Nylon knitted gloves with PVC dots on palm for positive grip. Ideal for handling cartons, glass and other objects with a sheer finish.

Combination of EVA foam and a hard-wearing TPR cap provide the required comfort and protection. Utilises a single hook-and-loop closing strap.

For our full range of Vehicle Work Lights, see page 791

1064 Recovery Winches ATV/Quad Recovery Winches Model No. SEE BELOW Suitable for ATV & quadbike mounting, these high speed Designed and built with the toughest jobs in mind. High class pulling power. Heavy-duty all-weather housing. Three-stage planetary gears. Patented unique automatic spring brake, reliable in full load operation. Sliding ring gear clutch. High quality wire rope feeds through four-way roller fairlead. IP67 rated motor and gearbox. Model No: ATV1135 ATV2040 Voltage: 12V 12V Line Pull*: 1135kg(2500lb) 2040kg(4500lb) Motor Power: 1.8kW(2.34hp) 2.5kW(3.25hp) Gear Ratio: 180:1 180:1 Line Speed*: No Load: 4.8m/min 4.5m/min Maximum Load: 1.6m/min 1.3m/min Current Draw: No Load: 26A 30A Maximum Load: 150A 185A Wire Rope Diameter: Ă&#x2DC;4.8mm Ă&#x2DC;5.4mm Wire Rope Length: 14m 17m Weight: 11.8kg 13.9kg Replacement Wire Rope: ATV1135.WR, ATV2040.WR Dyneema Rope: ATV1135.DR, ATV2040.DR

4-Pin Universal Winch Remote Control Model No. UWRC01 Universal wireless remote control kit has a 4-pin plug-and-play receiver and is compatible with Sealey ATV/quad bike, self recovery and industrial recovery winches. With a range of up to 30m (dependant on environment), a wireless remote control is an essential accessory. Weatherproof receiver trucks, enabling the operator to stand well clear or sit in the cab (provided there are no restrictions). Contents: Handheld Control Unit (x1), 4-Pin Plug-and-Play Receiver Unit (x1) Range: 30m Battery: MN21 23A (supplied)

Aluminium Hawse Fairleads Model No. SEE BELOW Machined from billet aluminium and for use in conjunction with Dyneema rope. Simply replaces the four-way fairlead roller used with wire rope and helps protect and extend the life of the rope. Available in four sizes: 124, 152, 254, 280mm between mounting centres. Model No: Distance Between Rope Mounting Centres: Aperture: AHF124 124mm 19.3 x 81mm AHF152 152mm 19.3 x 110mm AHF254 254mm 24 x 205mm AHF280 280mm 24 x 205mm

Overall Width: 150mm 178mm 299mm 325mm

Replacement Wire Rope Model No. SEE SPEC TABLES All winches are supplied as standard with wire rope. As this is a consumable part, replacement ropes are available correct model number to suit your winch.

ATV/Quad Bike Self Recovery Kit Model No. SRKIT01 Self recovery kit increases pulling capacity, changes pulling direction and is essential for getting the most out of an ATV/quad bike winch. Supplied in a black heavyweight nylon bag. Contents: 2000kg Snatch Block (x1), 1400kg Galvanized 'D' Shackles (x2), 2500kg Tree/Post Slings 1.8m x 25mm (x2)

Off-Road Self Recovery Kit Model No. SRKIT02 Self recovery kit increases pulling capacity, changes pulling direction and is essential for getting the most out of a recovery winch. Supplied in a black heavyweight nylon bag. Contents: 10tonne Snatch Block (x1), 4.75tonne Galvanized 'D' Shackles (x2), 8tonne Tree/Post Slings 3.05m x 76mm (x2)

1066 Tow Ropes & Poles

Tow Ropes Model No. SEE BELOW Tow Rope 2000kg Rolling Load Capacity Model No. TH2002 Heavy-duty non-elastic tow rope with a maximum rolling

Maximum Rolling Load Capacity: Maximum Rolling Load Capacity:

Maximum Rolling Load Capacity: Length:

2tonne 4m

Tow Pole 2000kg Rolling Load Capacity Model No. TPK252 2tonne Rolling load capacity tow pole. Steel sections clip towing/overrun. Maximum Rolling Load Capacity: Length:

2tonne 2m

Tow Pole with Shock Spring 2000kg Rolling Load Capacity Model No. TPK2522 2tonne Rolling load capacity tow pole with spring loaded secure attachment to vehicle. Suitable for mixed towing Supplied in pouch. Maximum Rolling Load Capacity: Length:

2tonne 1.8m

Tow Pole 2500kg Rolling Load Capacity Model No. TPK253 mechanism allows for mounting pole between vehicles or vertical. Maximum Rolling Load Capacity: Length:

2.5tonne 1.8m

Tow Pole 2500kg Rolling Load Capacity Model No. TPK353 mechanism allows for mounting pole between vehicles or vertical. Maximum Rolling Load Capacity: Length:

2.5tonne 1.6m

IMPORTANT Tow ropes are designed to pull rolling loads only. Do rope for signs of wear or damage and always consult the vehicle's manual for towing guidelines. Also ensure your insurance covers towing.

TH2502 2tonne TH3002 3tonne

Tarpaulins & Accessories 1067

Tarpaulins Model No. SEE RIGHT Manufactured from 130g/m² polyethylene with heavy, 30micron laminate. Tear proof, waterproof and treated mildew proofed. Constructed with roped edges and metal grommets in all corners and every metre. Top quality

BLUE GREEN Model No: Model No: TARP68 TARP68G TARP810 TARP810G TARP1012 TARP1012G TARP1216 TARP1216G TARP1620 TARP1620G TARP1824 TARP1824G TARP2040 TARP2040G Note: Nominal sizes

Size: 1.73 x 2.31m 2.44 x 3.05m 3.05 x 3.66m 3.66 x 4.88m 4.88 x 6.10m 5.49 x 7.32m 6.10 x 12.19m

12pc Assorted Tarpaulin Cord Set Model No. TARP12

2pc Tarpaulin Clip Set Model No. TARP/2

4pc Tarpaulin Clip Set Model No. TARP4

cord. Ingenious design grips tarps and sheeting tight without the need to locate rope eyes. The tighter the clip use on trucks, trailers, farm, garden and garage applications.

Polypropylene Rope Model No. SEE BELOW Multipurpose heavy-duty weather resistant polypropylene

Composite clip set with heavy-duty spring. Simple to of tarpaulins and sheeting without the need to use rope garage applications.

The cord is detached from the hook, fed through the tarpaulin rope eye and then reattached at the required length. Three stretch up to 1050mm and safe load up to 20kg. Contents: Free Length: 310mm 440mm 600mm

310mm (x4), 440mm (x4), 600mm (x4) Maximum Stretch: 550mm 800mm 1050mm

6pc Ratchet Tie Down & Flat Bungee Cord Set Model No. TD285SBD

lengths. Model No: RC0630 RC06220 RC0830 RC08220 RC1030 RC10220

Diameter: Ø6mm Ø6mm Ø8mm Ø8mm Ø10mm Ø10mm

Length: 30m 220m 30m 220m 30m 220m

Contents: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

For our full range of Ratchet Tie Downs, see pages 1069 to 1071

Tie Downs (x2), Bungee Cords (x4) 400kg 800kg 25mm 5m S-Type

1068 Bungee Cords Flat Bungee Cord Sets Model No. SEE BELOW Set of two extra-strong bungee cords ideal for multiple applications including garage, workshop, trailer and domestic use. Heavy-duty steel hooks with nylon coating, polypropylene braid with high grade rubber cord giving maximum elasticity. Up to three times stronger than traditional bungee cords. Model No:

Free Length: 460mm 610mm 760mm 910mm

Maximum Stretch: 1040mm 1300mm 2000mm 2200mm

Bungee Cord Sets Model No. SEE BELOW Set of two strong steel hooks with smooth nylon coating to prevent scratching. Heavy-duty polypropylene braid and high grade rubber cord providing maximum elasticity. Ideal for a wide range of applications including garages, workshops and trailers. Model No:

Free Length: 460mm 610mm 760mm

Maximum Stretch: 1100mm 1350mm 1700mm

1000mm Octopus Bungee Cord Model No. BCS23

10pc Elastic Cord Set Model No. BCS10

20pc Elastic Cord Set Model No. BCS20

Elastic cords make tying items down quick and easy. Can be used in the workshop, garage, car, trailer and caravan. Not suitable for supporting loads.

Fitted with eight nylon coated steel hooks to provide a strong hold and prevent scratching. Arms stretch out from centre ring to secure multiple points. Ideal for securing awkward items on trailers and roof racks while in transit.

Ø8 x 250 (x4), Ø8 x 600 (x2), Ø8 x 800 (x2), Ø8 x 1000mm (x2)

Ø8 x 250 (x4), Ø8 x 400 (x4), Ø8 x 500 (x4), Ø8 x 600 (x4), Ø8 x 750mm (x4)

Free Length: Maximum Stretch:

1000mm 1800mm

Ratchet Tie Downs 1069

Auto Retractable Ratchet Tie Downs Model No. SEE BELOW Manufactured from polyester webbing with stitched reinforcement around hooks. Auto rewind at a push of a button retracts the webbing, leaving the unit neat and tidy. Simple drum and ratchet mechanism tensions the webbing to mechanism are rubber coated for added comfort. Model No: Quantity: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

ATD25301 1 300kg 600kg 25mm 3m S-Type

ATD50301 1 750kg 1500kg 50mm 3m S-Type

Slide Ratchet Tie Down Model No. TD1202SR Manufactured from polyester webbing with stitched for securing weighty loads and tarpaulins onto trailers. Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism providing superior load restraint. Sliding feature allows mechanism to be located at any point along run of webbing, resulting in reduced load away excess webbing for improved safety. Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

600kg 1200kg 32mm 3m S-Type

Car Transporter Ratchet Tie Downs Model No. SEE BELOW Manufactured from polyester webbing with stitched reinforcement around hooks. Suitable for securing cars on transporters using wheel strap, which slides on to the main tie down. Model No. TDRWA features soft wheel chocker for use on alloy wheels. A double-locking, short narrow handle ratchet ensures there is no risk of disengagement or tension loss until the handle is released. Model No: Quantity: Maximum Tension: Load Test: Webbing Width: Webbing Length: Cross Strap Length: Wheel Type: Hook:

TDRWA 1 2500kg 5000kg 50mm 3m 320mm Alloy J-Type

TDRWS 1 2250kg 4500kg 50mm 3m 320mm Steel J-Type

IMPORTANT The maximum tension is that which is developed by the ratchet mechanism. The load test is the capacity of the webbing to resist shock loads.

4pc Car Transporter Ratchet Tie Down Kit Model No. TDRWKIT Manufactured from polyester webbing with stitched reinforcement around hooks. Suitable for securing cars on transporters using wheel strap, which slides on to the main tie down. Includes four ratchet tie downs, four soft wheel chokers for use on alloy wheels and four wheel chokers with 'O' rings for use on steel wheels. A double-locking, short narrow handle ratchet ensures there is no risk of disengagement or tension loss until the handle is released. Maximum Tension: Load Test: Webbing Width: Webbing Length: Cross Strap Length Wheel Type: Hook:

For our full range of Head Torches, see pages 770 to 771

2250kg 4500kg 50mm 3m 320mm Alloy or Steel J-Type

1070 Ratchet Tie Downs

Self-Securing Ratchet Tie Downs Model No. SEE BELOW Manufactured from polyester webbing. These straps are together. Feed webbing around load and back through ratchet mechanism to ensure load is secure. Simple drum and ratchet mechanism tensions the webbing to provide superior load restraint. Model No: Quantity: Maximum Tension: Load Test: Webbing Width: Webbing Length:

TD05045E 2 250kg 500kg 25mm 4.5m

TD08045E 2 400kg 800kg 25mm 4.5m

Polyester Webbing Ratchet Tie Downs with S Hooks Model No. SEE RIGHT Manufactured from polyester webbing with stitched reinforcement around hooks. Suitable for securing loads restraint. Simple drum and ratchet mechanism tensions the webbing to provide superior load restraint.

Model No: Quantity: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

TD0540S2 2 250kg 500kg 25mm 4m

TD0540S4 4 250kg 500kg 25mm 4m

Polyester Webbing Cam Buckle Tie Downs with S Hooks Model No. SEE BELOW Manufactured from polyester webbing with stitched reinforcement around hooks. Suitable for securing loads and tarpaulins superior load restraint. Model No: Qty: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook :

TD2525CS 2 125kg 250kg 25mm 2.5m

TD2550CS 2 125kg 250kg 25mm 5m

Polyester Webbing Ratchet Tie Downs with S Hooks Model No. SEE BELOW Manufactured from polyester webbing with stitched reinforcement around hooks. Suitable for securing loads restraint. Simple drum and ratchet mechanism tensions the webbing to provide superior load restraint. Model No: Qty: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

TD284SD 2 400kg 800kg 25mm 4m

TD484SD 4 400kg 800kg 25mm 4m

Tie Down Securing Loop - Pair Model No. TDL01 Manufactured from polyester webbing. Use to either loop or create a slip knot at any appropriate point of the load and then attach to the hook of the strap. Suitable for use

Maximum Tension: Load Test: Webbing Width: Webbing Length:

1000kg 2000kg 35mm 450mm

TD05025CS 2 250kg 500kg 25mm 2.5m

TD05050CS 2 250kg 500kg 25mm 5m

Ratchet Tie Downs 1071 Ratchet Tie Downs Model No. SEE BELOW Manufactured from polyester webbing with stitched reinforcement around hooks. Suitable for securing loads restraint. Tie downs rely on the operator tensioning the webbing with body weight. Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism providing superior load restraint. Model No: Quantity: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

Model No: Quantity: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

TD0845S 1 400kg 800kg 25mm 4.5m

TD0845J 1 400kg 800kg 25mm 4.5m

TD1506J 1 750kg 1500kg 25mm 6m

TD1508J 1 750kg 1500kg 25mm 8m

TD1510J 1 750kg 1500kg 25mm 10m

TD2006J 1 1000kg 2000kg 35mm 6m

TD2008J 1 1000kg 2000kg 35mm 8m

TD2010J 1 1000kg 2000kg 35mm 10m

TD3006J 1 1500kg 3000kg 50mm 6m

TD3008J 1 1500kg 3000kg 50mm 8m

TD3010J 1 1500kg 3000kg 50mm 10m

32mm x 4.9m Polyester Webbing Ratchet Tie Down with J Hooks 1200kg Load Test - 2 Pairs Model No. TD41248JD Manufactured from polyester webbing with stitched reinforcement around hooks. Suitable for securing loads

Model No: Quantity: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

TD5006J 1 2500kg 5000kg 50mm 6m

TD5008J 1 2500kg 5000kg 50mm 8m

TD5010J 1 2500kg 5000kg 50mm 10m

TD10008J 1 5000kg 10000kg 75mm 8m

TD10010J 1 5000kg 10000kg 75mm 10m

TD10012J 1 5000kg 10000kg 75mm 12m

restraint. Simple drum and ratchet mechanism tensions the webbing to provide superior load restraint. Quantity: Maximum Tension: Load Test: Webbing Width: Webbing Length: Hook:

For all of our latest products and promotions visit www.sealey.co.uk

4 600kg 1200kg 32mm 4.9m

1072 Motorcycle Covers & Solar Panels Motorcycle Covers Model No. SEE BELOW Ideal for protection, rain or shine, against weathering and fading. Double layer cover for extra protection. Inner layer is made from soft anti-scratch material to protect motorcycle’s paintwork. Has a clear PVC pocket to accept Model No. SPP01 solar panel (requires Model No. SPP01.A adaptor) to enable battery need for mains power supply. Elastic corners with strap and

Model No: MCS MCM MCL

Size: Small Medium Large

Dimensions (L x W x H): 1830 x 890 x 1300mm 2320 x 1000 x 1350mm 2460 x 1050 x 1370mm

Motorcycle Coveralls with Solar Panel Pocket Model No. SEE BELOW A fully enclosed cover; the two halves zip together to completely protect the motorcycle, rain or shine, against weathering and fading. Double layer 190T silver polyester cover for extra protection. Inner layer is made from soft anti-scratch material to protect motorcycle’s paintwork. Base is made from hard-wearing 420D with PVC coating. Has a clear PVC pocket to accept Model No. SPP01 solar panel (requires Model No. SPP01.A adaptor) to enable without the need for mains power supply. The cover has side vent holes to aid air circulation. Supplied in a storage bag. Model No: MCBM MCBL MCBXL

Solar Power Panels Model No. SEE BELOW Amorphous solar panels convert daylight directly into 12V electricity. Suitable for maintaining charge in a wide range of batteries and power packs. Ideal for batteries stored in boats and caravans and for batteries in vehicles in long-term storage. Advanced technology solar panels require only daylight to generate power. Supplied with battery clips and vehicle accessory socket plug. Model No:

Output: 12V/1.5W 12V/4.8W

Dimensions: 340 x 120mm 410 x 345mm

Size: Medium Large X-Large

Dimensions (L x W x H): 2270 x 990 x 1370mm 2460 x 990 x 1370mm 2740 x 990 x 1540mm

Folding Wheel Step Model No. STS01 Heavy-duty wheel step gives safe and easy access to engine or top of vehicle, ideal for 4x4s. Heavy gauge all steel construction folds for easy storage. Wheel diameter platform for added grip and safety. Platform is height adjustable (three mounting points 90mm apart). Capacity: Platform Size: Wheel Diameter:

225kg 210 x 560mm Ø14"-20"

Car Covers 1073 Lightweight Car Covers Model No. SEE BELOW Made from lightweight, anti-scratch material to protect vehicle’s paintwork. Side opening zips give access to vehicle doors without removing cover. Features elastic to secure cover onto vehicle. Suitable for dust protection and resistant to light rain. Model No: CCES CCEM CCEL CCEXL

Dimensions (L x W x H): 3800 x 1540 x 1190mm 4060 x 1650 x 1220mm 4300 x 1690 x 1220mm 4830 x 1780 x 1220mm

Car Covers Model No. SEE BELOW Ideal for protection, rain or shine, against weathering and fading. Two layer cover for extra protection. Inner layer is made from soft anti-scratch material to protect vehicle’s opening zips give access to vehicle doors without removing cover. Supplied with waterproof storage bag. Model No: CCS CCM CCL CCXL

Dimensions (L x W x H): 3800 x 1540 x 1190mm 4060 x 1650 x 1220mm 4300 x 1690 x 1220mm 4830 x 1780 x 1220mm

3-Layers All-Seasons Car Covers Model No. SEE BELOW Professional all-seasons car covers, manufactured from completely waterproof three-layer breathable composite material, which allows condensation to evaporate. Can be used inside or outside to protect vehicle from elements that and ties down securely with under car straps. This range of car covers also protects from UV/heat, environmental pollutants, bird droppings plus snow and ice. Model No: SCCS SCCM SCCL SCCXL SCCXXL

Dimensions (L x W x H): 3800 x 1650 x 1200mm 4050 x 1650 x 1200mm 4550 x 1650 x 1200mm 5100 x 1780 x 1240mm 5100 x 1950 x 1520mm UV stable material ensures cover can be used during Summer months to protect vehicle from heat and the sun’s rays without the risk of fabric degradation. With use of external seams, this cover minimises the risk of abrasion and ensures the cover is completely waterproof.

Cover provides resistance to environmental pollutants, tree sap and bird droppings.

Cover protects vehicle against snow and ice, thanks to its waterproof three-layer design.

Made using a three-layer cover allowing paint work to breathe, preventing condensation forming and reducing the risk of damaging the vehicle’s paintwork.

For all of our Forlatest our full products range of and Tarpaulins, promotions seevisit page www.sealey.co.uk 1067

1074 Storage Shelters

Vehicle Storage Shelters Model No. SEE BELOW Made from durable anti-scratch material to protect vehicleâ&#x20AC;&#x2122;s paintwork. Rigid tubular frame with hinged opening for easy access. Adjustable side vents allow increased ventilation when canopy is closed. Model No:

Overall Size (L x W x H):

Vehicle Storage Shelter Model No. CCS01 Made from durable anti-scratch material to protect vehicle's paintwork. Rigid tubular frame with hinged opening for easy access. Hook-and-loop vents allow increased ventilation while still keeping vehicle protected from elements. Includes anchor point for increased security when canopy is closed. Overall Size (W x D x H):

Car Port/Shelters 1075 3.0 x 5.2 x 2.4m Instant Car Port/Shelter Model No. CPS01 Allows for temporary or permanent storage of small cars, boats, materials and machinery. Manufactured from a strong, rust resistant thermoset powder coated steel frame and three layer heavy-duty polyethylene tarpaulin cover, with rip-stop to help prevent tears. Includes stake pegs to secure unit against strong winds and side skirting to protect against crosswinds. Features a wide opening double zip door which can be rolled up to provide easy access. Cover is UV resistant for long life and gives protection for stored items. Size (W x D x H):

3.0 x 5.2 x 2.4m

4.0 x 6.0 x 3.1m Dome Roof Car Port/Shelter Model No. CPS03 Allows for temporary or permanent storage of small cars, boats, materials and machinery. Manufactured from a strong, rust resistant thermoset powder coated steel frame and three layer heavy-duty polyethylene tarpaulin cover, with rip-stop to help prevent tears. Includes stake pegs to secure unit against strong winds and side skirting to protect against crosswinds. Features a wide opening double zip door which can be rolled up to provide easy access. Cover is UV resistant for long life and gives protection for stored items. Features a dome roof design to further protect against strong winds. Size (W x D x H):

4.0 x 6.0 x 3.1m

3.3 x 7.5 x 2.9m Instant Car Port/Shelter Model No. CPS02 Allows for temporary or permanent storage of large cars, boats, materials and machinery. Manufactured from a strong, rust resistant thermoset powder coated steel frame and three layer heavy-duty polyethylene tarpaulin cover, with rip-stop to help prevent tears. Includes stake pegs to secure unit against strong winds and side skirting to protect against crosswinds. Features a wide opening double zip door which can be rolled up to provide easy access. Cover is UV resistant for long life and gives protection for stored items. Size (W x D x H):

3.3 x 7.5 x 2.9m

CPS01 is secured using heavy-duty ratchet tie-downs.

CPS02 & CPS03 feature clips to keep shelter door open when in use.

For our full range of Floodlights, see pages 786 to 790

1076 Galvanized Sheds

Also available in Galvanized Green

Galvanized Steel Sheds Model No. SEE RIGHT

Model No:

Colour:

Doors:

Roof Type:

Overall Size (W x D x H*):

Galvanized steel panels easily assembled to form rigid and secure structure. Model Noâ&#x20AC;&#x2122;s GSS150815 and have pent (sloping) roofs and single doors. Doors are secured by cross bolt and eyelet which will accept a padlock (not included) for additional security. All models are supplied

*Minimum Wall Height

8 LED Auto Light with PIR Sensor Model No. GL93 Manufactured from a lightweight composite material. Two the LEDs on when the PIR sensor detects movement.

1.2W COB Auto Light with PIR Sensor Model No. GL931 Manufactured from a lightweight composite material. Powerful twin 0.6W COB LED producing 120lm. Easily (not included).

LED Quantity: Lumen Output: Battery:

80lm

LED Quantity: Lumen Output: Battery:

120lm

Galvanized Sheds 1077

for easy transportation. We recommend that assembly is carried out by two people.

and eyelet that accepts padlock for additional security. For our full range of Padlocks see pages 894 to 897.

Galvanized Steel Sheds Model No. SEE RIGHT Galvanized steel panels easily assembled to form a rigid and secure apex roofed structure. Model No. GSS2323(G) has single door and Model No. GSS3030(G) has double doors, which are secured by cross bolt and eyelet, that accepts a padlock (not included) for additional

Silver Green Silver Green

1 1 2 2

Outdoor Storage Box Model No. SBSC01 Manufactured from heavy-duty polypropylene, maintenance free and fully weatherproof. Features hinged lid which can be padlocked (not included) for added security. Fitted with two carry-handles, closed ventilation and two integral wheels on base for easy manoeuvrability. Ideal for use in multiple domestic applications, including garden tool and furniture storage.

1120mm 1100mm

460mm 450mm

540mm 500mm 150kg 9.8kg

For our full range of Garage Storage Systems, see pages 851 to 865

Apex Apex Apex Apex

2300 x 2300 x 1900mm 2300 x 2300 x 1900mm 3000 x 3000 x 2000mm 3000 x 3000 x 2000mm *Minimum Wall Height

1078 Vehicle Locks, Clamps & Parking Barriers

Claw Car Wheel Clamp with Lock & Key Model No. PB395 Steering Wheel Lock Model No. PB393

Wheel Internal Diameter Range:

Minimum Clamp Diameter: Maximum Clamp Diameter: Throat:

nylon sleeve for avoiding accidental scratching and damage 190mm

Wheel Clamp with Lock & Key Model No. PB397

Wheel Clamp with Lock & Key Model No. PB396

10.5 x 10.5 x 900mm Motorcycle Chain Lock 4* ART Approved Model No. CLA1090

3 Legged Parking Barrier Model No. PB296

Minimum Clamp Diameter: Maximum Clamp Diameter: Maximum Tyre Width:

Minimum Height: Maximum Height: Width:

50mm 440mm 690mm

No Parking Barrier Model No. PB391

3 Legged Parking Barrier with Integral Lock Model No. PB298

Minimum Clamp Diameter: Maximum Clamp Diameter: Maximum Tyre Width:

installation. Minimum Height: Maximum Height:

40mm 440mm

Minimum Height: Maximum Height: Width:

60mm 650mm 980mm

Safety Barriers 1079

Safety Bollards Model No. SEE BELOW Constructed from heavy-duty Ø110mm steel pipe. Plastic cap can be removed and the

900mm Folding Bollard with Lock Model No. FBOL900 Model No: Height: Weight:

BOL600

BOL900

BOL1050

BOL1200

Minimum/Maximum Height: Weight:

Heavy-Duty Machine Guards Model No. SEE BELOW

130/900mm 10.76kg

900mm Safety Bollard Model No. SR61B Ideal for restricting access to certain areas. Bollards are

plate. Powder coated yellow with ‘hazard’ black and yellow band at either end for high visibility. Model No: Height: Weight:

MG600 600mm

MG900 900mm

concrete if required. MG1050 1050mm

Section: Height:

Ø105mm 900mm

Removable Bollard Base Plate - Locking Model No. RBLP 2500mm Plastic Folding Barrier Model No. PFB2500 will accommodate most robust padlock designs such as for quick and easy stowing. Weight:

Minimum Height: Width: Weight:

For our full range of Safety Products, see pages 910 to 925

30mm

1080 Bicycle Carriers & Racks

3 Bicycle Rear Carrier - 5 Strap Fixing Model No. BS3 2 Bicycle Tow-Ball Mounting Carrier Model No. BS2 Strong tubular construction. Mounts firmly onto any Ă&#x2DC;50mm tow-ball in seconds and will carry two bicycles. Features individual bike supports with straps and positive

2 Bicycle Rear Carrier Model No. BS17

rubber tubes for protection of vehicle at contact points. straps of bicycle carrier to glass edged hatches available separately - order Model No. BS3/1.

mounting straps and four foam pads to prevent damage to car. Folds for easy storage.

Height: Width:

875mm 440mm

Hatchback Glass Pullers for BS3 Bicycle Carrier Model No. BS3/1 carrier to glass edged hatchbacks.

3ft Bicycle Carrier Lighting Board with 2m Cable Model No. TB3/2 Important: Standard trailer boards should not be used in conjunction with bicycle carriers.

Front Wheel Wall Mounting Bicycle Rack Model No. BS19 Wall mounting and cleverly designed to allow bicycle to be

used with a chain and lock for added security. Suitable for both road and mountain bikes. Supplied with heavy-duty

Folding Bicycle Rack - Wall Mounting Model No. BS7

Maximum Wheel Width: Maximum Wheel Diameter: Size (W x D x H): Maximum Capacity:

Width: Arm Length: Maximum Capacity:

68mm Ă&#x2DC;28" (711mm) 80kg

Wall mounting storage rack. Arms fold up when unloaded for compact storage. Supports up to two bicycles. 500mm 490mm 40kg

Bicycle Racks & Stands 1081

Dual Height Bicycle Rack for 5 Bicycles Model No. BS18 Manufactured from heavy-duty galvanized steel tubing for corrosion resistance. Suitable

Bicycle Racks Model No. SEE BELOW Heavy-duty bicycle racks, manufactured from galvanized steel for corrosion resistance. Model No: BS14 Bicycle Capacity: 1 Dimensions: 90 x 260 x 365mm (W x D x H) Maximum Tyre Width: 55mm

BS15 3 700 x 260 x 320mm

BS16 5 1420 x 260 x 320mm

55mm

Bicycle Capacity: Dimensions (W x D x H): Maximum Tyre Width:

5 1370 x 400 x 320mm 50mm

Adjustable Wall Mounting Bicycle Rack Model No. BS13 Wall mounting bicycle rack. Heavy-duty galvanized

Workshop Bicycle Stand Model No. BS103 Workshop Bicycle Stand Model No. BS102

frame clamp preventing damage stability and multi-position tool tray hand. Adjustable bicycle locking strap

available separately - Order Model No. BS102S. Minimum Height: Maximum Height: Maximum Load: Weight:

1050mm 1750mm 30kg 6kg

separately - Order Model No. BS102S. Minimum Height: Maximum Height: Weight:

1050mm 1750mm 6.2kg

For our Chain & Cable Lubricant, see page 1120

CONSUMABLES Abrasive Papers................................................................1146-1147 Adhesives & Sealants.....................................................1122-1123 Aerosols...............................................................................1119-1121 Air Line Couplings............................................................1130-1133 Assortment Boxes ...........................................................1084-1094 Automotive Cables...................................................................... 1104 Automotive Fuses........................................................................ 1101 Backing Pads ................................................................................. 1155 Bandsaw Blades ........................................................................... 1151 Battery Terminals ......................................................................... 1105 Bench Grinding Wheels ............................................................. 1150 Blades...................................................................................1151-1152 Brake Pipe Connectors..................................................1114-1115 .............................................1154-1155 Cable Ties ....................................................................................... 1106 Car Protection & Additives ....................................................... 1168 Cleaning Products ....................................................................... 1170 Countersink Bits ........................................................................... 1139 Crimp Terminals................................................................1096-1099 Cutting & Grinding Discs ........................................................... 1148 CVJ Boots & Clamps................................................................... 1113 Drill Bits ................................................................................1139-1145 Fasteners & Fixings .........................................................1124-1128

.................................................................................. 1095 Grease .............................................................................................. 1118 Grease Fittings .............................................................................. 1117 .........................................................................1102-1103 .....................................................1099-1100 ...........................................................................1110-1111 Paint Brushes................................................................................. 1156 Paper Rolls & Wipes .................................................................... 1166 Plugs ................................................................................................. 1100 Pressure Sprayers ....................................................................... 1169 Rivets ....................................................................................1108-1109 Rotary Burrs .......................................................................1144-1145 Sanding Belts................................................................................. 1153 Shot Blasting & Chemicals ....................................................... 1171 Soldering......................................................................................... 1138 ............................................. 1116 Step Drills........................................................................................ 1143 Tapes ....................................................................................1106-1107 Trim Clips.............................................................................1157-1165 Tyre & Wheel Maintenance ....................................................... 1112 Welding Accessories ......................................................1135-1137 Wire Brushes.................................................................................. 1149

SECTION 18

CONSUMABLES OUR VAST RANGE OF CONSUMABLES HAS SOMETHING FOR EVERYONE, FROM THE PROFESSIONAL WORKSHOP TECHNICIAN TO THE DIY ENTHUSIAST Consumables complement the Sealey range of tools and equipment perfectly. On the following pages you abrasives to zinc paint, electrical products, trim clips, drill bits, polishing accessories, hand cleaners and much more.

1084 Assortment Boxes

444pc High Tensile Setscrew, Nut & Washer Assortment - M5 Metric Model No. AB049SNW

408pc High Tensile Setscrew, Nut & Washer Assortment - M6 Metric Model No. AB050SNW

Contents (Approximate Quantity): Setscrews; Diameter x Length; M5 x 16 (x60), M5 x 20 (x40), M5 x 25 (x20), M5 x 40 (x12), M5 x 50mm (x12), Nuts; M5 Steel (x140), Washers; M5 Flat Washer Form A (x160)

Contents (Approximate Quantity): Setscrews; Diameter x Length; M6 x 16 (x50), M6 x 20 (x50), M6 x 25 (x20), M6 x 35 (x12), M6 x 50mm (x12), Nuts; M6 Steel (x144), Washers; M6 Flat Washer Form A (x120)

220pc High Tensile Setscrew, Nut & Washer Assortment - M8 Metric Model No. AB051SNW

150pc High Tensile Setscrew, Nut & Washer Assortment - M10 Metric Model No. AB052SNW

Contents (Approximate Quantity): Setscrews; Diameter x Length; M8 x 25 (x20), M8 x 40 (x10), M8 x 50 (x10), M8 x 75mm (x10), Nuts; M8 Steel (x50), Washers; M8 Flat Washer Form A (x120)

Contents (Approximate Quantity): Setscrews; Diameter x Length; M10 x 25 (x10), M10 x 35 (x10), M10 x 50 (x10), M10 x 75mm (x10), Nuts; M10 Steel (x40), Washers; M10 Flat Washer Form A (x70)

150pc High Tensile Setscrew Assortment DIN 933 - M5-M10 Metric Model No. AB048SS

144pc 1/4"-3/8"UNF Setscrew Assortment BS 1768 Model No. AB047UNF

Contents (Approximate Quantity): Diameter x Length; M5 x 25 (x40), M6 x 25 (x40), M8 x 25 (x28), M8 x 40 (x20), M10 x 25 (x8), M10 x 40mm (x14)

Contents (Approximate Quantity): Diameter x Length; 1/4" x 1-1/2" (x50), 1/4" x 1" (x50), 5/16" x 1" (x20), 5/16" x 1-1/2" (x8), 3/8" x 1" (x8), 3/8" x 1-1/2" (x8)

108pc Socket Screw Button Head Assortment High Tensile DIN 912 M5-M10 Metric Model No. AB053BH

264pc Machine Screw Assortment Countersunk & Pan Head Pozi M5-M8 Metric Model No. AB054MS

Contents (Approximate Quantity): Diameter x Length; M5 x 12 (x30), M5 x 16 (x30), M6 x 16 (x10), M8 x 10 (x12), M8 x 20 (x8), M8 x 25 (x8), M10 x 40mm (x10)

Contents (Approximate Quantity): Diameter x Length; Pan Head; M5 x 20 (x60), M5 x 25 (x60), M6 x 20 (x50), M6 x 25mm (x50), Countersunk; M8 x 20 (x24), M8 x 25mm (x20)

Assortment Boxes 1085

1070pc Flat Washer Assortment DIN 125 - M5-M16 Form A Metric Model No. AB055WA

495pc Flat Washer Assortment Form C - M6-M24 Metric BS 4320 Model No. AB056WC

Contents (Approximate Quantity): M5 x 10 (x300), M6 x 12 (x300), M8 x 17 (x300), M10 x 21 (x100), M12 x 24 (x50), M14 x 28 (x10), M16 x 30mm (x10)

Contents (Approximate Quantity): M6 x 14 (x170), M8 x 21 (x170), M10 x 24 (x100), M12 x 28 (x30), M14 x 30 (x10), M16 x 34 (x5), M20 x 39 (x5), M24 x 50mm (x5)

1010pc Spring Washer Assortment DIN 127B - M6-M16 Metric Model No. AB058SW Contents (Approximate Quantity): M12 (x10), M14 (x10), M16 (x10)

M6 (x400), M8 (x400), M10 (x180),

200pc Internal/External Circlip Assortment - Metric Model No. AB017CC External Sizes (Approximate Quantity): 11 (x20), 13 (x15), 16 (x15), 19 (x10), 21 (x10), 22 (x10), 25 (x5), 30 (x5), 35 (x5), 38mm (x5) Internal Sizes (Approximate Quantity): 11 (x20), 13 (x15), 16 (x15), 19 (x10), 21 (x10), 22 (x10), 25 (x5), 30 (x5), 35 (x5), 38mm (x5)

50pc Linch Pin Assortment - Metric Model No. AB022LP Contents (Approximate Quantity):

4.5 (x16), 6 (x18), 8 (x6), 11mm (x10)

250pc Grub Screw Assortment DIN 916 - M4-M10 Metric Model No. AB045GS Contents (Approximate Quantity): M4 x 8, M5 x 5, M5 x 10, M6 x 6, M6 x 8, M6 x 10, M8 x 8, M8 x 10, M8 x 12, M10 x 10mm (25 of each)

800pc E-Clip Retainer Assortment - Imperial Model No. AB013ER

800pc E-Clip Retainer Assortment - Metric Model No. AB012ER

Contents (Approximate Quantity): (ID) 1/8" (x150), 5/32" (x150), 3/16" (x100), 7/32" (x80), 1/4" (x80), 5/16" (x50), 3/8" (x50), 7/16" (x50), 1/2" (x50), 5/8" (x40)

Contents (Approximate Quantity): (ID) 1.7 (x150), 2.75 (x150), 3.5 (x100), 4.5 (x100), 6 (x100), 7 (x80), 13 (x70), 15.5mm (x50)

For our full range of Individual Screws, Nuts & Washers, see pages 1124 to 1128

1086 Assortment Boxes

255pc Nylon Lock Nut Assortment DIN 985 - M4-M16 Metric Model No. AB033LN

300pc Nylon Lock Nut Assortment DIN 982 - M6-M12 Metric Model No. AB032LN

Contents (Approximate Quantity): M4 x 0.7 (x50), M5 x 0.8 (x50), M6 x 1 (x40), M8 x 1.25 (x35), M10 x 1.5 (x30), M12 x 1.75 (x20), M14 x 2 (x15), M16 x 2mm (x15)

Contents (Approximate Quantity): M12 x 1.75mm (x20)

255pc Steel Nut Assortment DIN 934 - M4-M16 Metric Model No. AB046SN Contents (Approximate Quantity): M4 x 0.7 (x50), M5 x 0.8 (x50), M6 x 1 (x40), M8 x 1.25 (x35), M10 x 1.5 (x30), M12 x 1.75 (x20), M14 x 2 (x15), M16 x 2mm (x15)

370pc Steel Nut Assortment DIN 934 - M5-M10 Metric Model No. AB028SN Contents (Approximate Quantity):

M5 (x150), M6 (x100), M8 (x80), M10 (x40)

1000pc Internal Serrated Lock Washer Assortment DIN 6798J M5-M10 Metric Model No. AB057LW Contents (Approximate Quantity):

M5 (x400), M6 (x300), M8 (x200), M10 (x100)

M6 x 1 (x130), M8 x 1.25 (x100), M10 x 1.5 (x50),

320pc Steel Nut Assortment DIN 934 1/4"-1/2"UNF Model No. AB029SN Contents (Approximate Quantity):

1/4" (x120), 5/16" (x120), 3/8" (x50), 1/2" (x30)

390pc Serrated Flange Nut Assortment DIN 6923 - M5-M12 Metric Model No. AB031FN Contents (Approximate Quantity): M10 x 1.5 (x20), M12 x 1.75mm (x10)

M5 x 0.8 (x120), M6 x 1 (x120), M8 x 1.25 (x120),

240pc Repair Washer Assortment Zinc Plated - M5-M10 Metric Model No. AB059RW Contents (Approximate Quantity): M5 x 19 (x60), M5 x 25 (x10), M6 x 19 (x60), M6 x 25 (x35), M6 x 38 (x10), M8 x 25 (x35), M8 x 38 (x10), M10 x 30 (x10), M10 x 38mm (x10)

Assortment Boxes 1087

500pc Self Drilling Phillips Pan Head Screw Assortment DIN 7504N Model No. AB060SDS Contents (Approximate Quantity): Diameter x Length; 3.5 x 13 (x100), 3.5 x 19 (x100), 3.5 x 25 (x100), 4.2 x 13 (x100), 4.2 x 19 (x40), 4.8 x 25 (x30), 4.8 x 19mm (x30)

510pc Self Tapping Countersunk Pozi Zinc Screw Assortment DIN 7982 Model No. AB062STCS

410pc Self Drilling Hexagon Head Screw Assortment DIN 7504K Model No. AB061SDH Contents (Approximate Quantity): Diameter x Length; 4.2 x 19 (x70),4.2 x 25 (x80), 4.8 x 13 (x70), 4.8 x 19 (x60), 4.8 x 25 (x60), 5.5 x 25 (x10), 5.5 x 38 (x10),5.5 x 51 (x10), 6.3 x 25 (x10), 6.3 x 38 (x10), 6.3 x 50mm (x20)

700pc Self Tapping Pan Head Pozi Screw Assortment DIN 7981CZ Model No. AB063STPH

Contents (Approximate Quantity): Diameter x Length; 3.5 x 16 (x140), 3.5 x 25 (x140), 4.2 x 19 (x130), 4.2 x 25 (x50), 4.2 x 38 (x20), 4.8 x 38mm (x30)

Contents (Approximate Quantity): Diameter x Length; 3.5 x 13 (x100), 3.5 x 19 (x100), 4.2 x 13 (x100), 4.2 x 19 (x50), 4.2 x 25 (x50), 4.8 x 13 (x50), 4.8 x 19 (x50), 4.8 x 25 (x50), 4.8 x 38 (x50), 5.5 x 19 (x50), 5.5 x 25mm (x50)

305pc Self Tapping Pan Head Pozi Screw Assortment DIN 7981CZ Model No. AB064STPP

600pc Self Tapping Countersunk Pozi Screw Assortment Zinc DIN 7982 Model No. AB065STCP

Contents (Approximate Quantity): Diameter x Length; 4.8 x 13 (x80), 4.8 x 19 (x80), 4.8 x 25 (x30), 4.8 x 38 (x25), 5.5 x 19 (x30), 5.5 x 25 (x25), 5.5 x 38 (x15), 6.3 x 25 (x10), 6.3 x 38mm (x10)

Contents (Approximate Quantity): Diameter x Length; 3.5 x 16 (x120), 3.5 x 19 (x120), 3.5 x 25 (x60), 3.5 x 38 (x50), 4.2 x 16 (x60), 4.2 x 19 (x50), 4.2 x 25 (x50), 4.2 x 38 (x30), 4.8 x 19 (x30), 4.8 x 25 (x20), 4.8 x 38mm (x10)

700pc Self Tapping Flanged Head Screw Assortment BS 4174 Model No. AB066STBK Contents (Approximate Quantity): Diameter x Length; 3.5 x 10 (x160), 3.5 x 19 (x160), 4.2 x 13 (x160), 4.2 x 19 (x60), 4.2 x 25 (x30), 4.8 x 13 (x30), 4.8 x 16 (x30), 4.8 x 19 (x30), 4.8 x 25mm (x40)

300pc Acme Screw with Captive Washer Assortment BS 4174CZ Model No. AB067SM Contents (Approximate Quantity): Diameter x Length; 4.2 x 13 (x50), 4.2 x 19 (x50), 4.8 x 13 (x50), 4.8 x 19 (x30), 5.5 x 13 (x30), 5.5 x 19 (x30), 6.3 x 13 (x30), 6.3 x 19mm (x30)

For our full range of Individual Screws, Nuts & Washers, see pages 1124 to 1128

1088 Assortment Boxes

200pc Number Plate Screw Assortment Plastic Enclosed Head Model No. AB076NP Colours: Size: Quantity:

Blue, Black, White, Yellow Ø4.8 x 18mm 200

200pc Splined Threaded Insert (Rivet Nut) Assortment M4-M8 Metric Model No. AB073TI Contents (Approximate Quantity): M8 x 1.25mm (x40)

M4 x 0.7 (x60), M5 x 0.8 (x40), M6 x 1 (x60),

200pc Rivet Assortment Black Anodised Model No. AB074BR

500pc Aluminium Multi-Grip Rivet Assortment Model No. AB075MG

Contents (Approximate Quantity): Standard Flange; 3.2 x 8 (x25), 4 x 10 (x25), 4.8 x 14mm (x25), Large Flange; 3.2 x 10 (x25), 4 x 10 (x25), 4 x 14 (x25), 4.8 x 14 (x25), 4.8 x 18mm (x25)

Contents (Approximate Quantity): Standard Flange; 3.2 x 10 (x60), 3.2 x 13 (x60), 4 x 12 (x35), 4 x 15 (x30), 4.8 x 13 (x25), 4.8 x 19mm (x20), Large Flange; 4.8 x 13mm (x50), Washer; M3 x 13mm (x220)

300pc Spring Roll Pin Assortment - Metric Model No. AB007RP

300pc Spring Roll Pin Assortment - Imperial Model No. AB006RP

Contents (Approximate Quantity): Diameter x Length; Ø2.5 x 25, 2.5 x 30, 3 x 24, 3 x 40, 4 x 25, 4 x 40, 5 x 24, 5 x 40, 6 x 25, 6 x 40, 8 x 25, 8 x 55mm (25 of each)

Contents (Approximate Quantity): Diameter x Length; Ø3/32" x 1" (x40), 1/8" x 1" (x40), 1/8" x 1-1/2" (x40), 5/32" x 1" (x30), 5/32" x 1-1/2" (x25), 3/16" x 1" (x25), 3/16" x 1-1/2" (x25), 1/4" x 1" (x25), 1/4" x 1-1/2" (x20), 5/16" x 1" (x20), 5/16" x 2" (x10)

555pc Split Pin Assortment Small Sizes - Imperial & Metric Model No. AB001SP

230pc Split Pin Assortment Large Sizes - Imperial & Metric Model No. AB003SP

Contents (Approximate Quantity): 1/16" x 1" (1.6 x 25.4mm) (x150), 3/32" x 1" (2.4 x 25.4mm) (x150), 3/32" x 1-1/2" (2.4 x 38mm) (x100), 1/8" x 1-1/4" (3.2 x 32mm) (x75), 1/8" x 2" (3.2 x 51mm) (x50), 5/32" x 2-1/2" (4 x 63mm) (x30)

Contents (Approximate Quantity): 3/32" x 1-1/12" (2.4 x 38mm) (x100), 5/32" x 2" (4 x 51mm) (x70), 3/16" x 2" (4.8 x 51mm) (x25), 1/4" x 3" (6.3 x 76mm) (x15), 19/64" x 4" (7.5 x 102mm) (x20)

Assortment Boxes 1089

Zinc plated with external pressed threads allowing smooth surface hose contact.

90pc Stainless Steel Hose Clip Assortment DIN 3017 Ø10-57mm Model No. SHCSS90AC

Contents (Approximate Quantity): Band Width 9mm; Ø8-14 (000), Ø10-16 (M00), Ø13-19 (00) (10 of each), Band Width 12mm; Ø16-22 (0), Ø16-25 (0X), Ø22-32mm (1) (10 of each), Ø25-38 (1X), Ø30-40 (1XB), Ø32-44 (245), Ø35-51 (2A), Ø38-57mm (2) (5 of each)

Contents (Approximate Quantity): Band Width 9mm; Ø10-16 (M00), Ø12-22 (0), Ø13-19 (00), Ø16-27mm (0X) (10 of each), Band Width 12mm; Ø22-32 (1), Ø25-38 (1X), Ø32-44 (245), Ø35-51 (2A), Ø38-57mm (2) (10 of each)

85pc Hose Clip Assortment DIN 3017 Ø8-57mm Model No. SHC85AC

Stainless steel with external pressed threads allowing smooth surface hose contact.

81pc HI-GRIP® Hose Clip Assortment DIN 3017 Ø9.5-55mm Model No. HCJ85AC 140pc O-Clip Double Ear Assortment Zinc Plated DIN 1.0338 Model No. AB044DE Contents (Approximate Quantity): 15-18 (x15), 17-20mm (x15)

7-9 (x30), 9-11 (x30), 11-13 (x25), 13-15 (x25),

Hi-Grip® worm drive hose clips. Zinc plated with external pressed threads allowing smooth surface hose contact. Contents (Approximate Quantity): Band Width 9.5mm; Ø9.5-12 (000) (x10), Ø11-16 (M00) (x10), Ø13-20mm (00) (x8), Band Width 12mm; Ø14-22 (0) (x8), Ø17-25 (0X) (x10), Ø22-30 (1A) (x10), Ø25-35 (1) (x5), Ø30-40 (1X) (x5), Ø35-45 (1M) (x5), Ø35-50 (2A) (x5), Ø40-55mm (2) (x5)

160pc O-Clip Single Ear Assortment Stainless Steel DIN 1.4301 Model No. AB043SE

100pc Mini Hose Clip Assortment DIN 1.0338 Model No. AB042MH

Contents (Approximate Quantity): Ø7-8.5 (x30), 8.5-10 (x30), 9.8-11.8 (x25), 11.8-13.8 (x25), 13.2-15.7 (x18), 15.3-18.5 (x18), 17.8-21 (x7), 20.2-22.8mm (x7)

Contents (Approximate Quantity): 14-16, 15-17, 16-18mm (10 of each)

225pc Rubber O-Ring Assortment Model No. AB004OR Contents (Approximate Quantity): Ø3.5 x 1.7 (x20), 4.5 x 1.7 (x20), 5 x 1.7 (x20), 6 x 1.7 (x20), 7.5 x 1.7 (x20), 9 x 1.5 (x15), 9.5 x 2.5 (x15), 10.5 x 2.5 (x15), 12.5 x 2.5 (x10), 14 x 2.5 (x10), 15.5 x 2 (x10), 15.5 x 2.5 (x10), 17 x 2.5 (x10), 18.5 x 3.5 (x10), 19 x 2.5 (x10), 21 x 3.5mm (x10)

Ø7-9, 8-10, 9-11, 10-12, 11-13, 12-14, 13-15,

200pc Clevis Pin Assortment Model No. AB019CP Contents (Approximate Quantity): Diameter x Length; Ø3/16" x 5/8" (x35), 3/16" x 7/8" (x35), 1/4" x 1/2" (x30), 1/4" x 1-1/16" (x25), 9/32" x 7/8" (x25), 1/4" x 7/8" (x20), 3/8" x 1-1/4" (x15), 5/16" x 1" (x15)

For our full range of Individual Hose Clips, see pages 1110 to 1111

1090 Assortment Boxes

600pc Fibre Washer Assortment - Metric Model No. AB014FW Contents (Approximate Quantity): ID x OD x Thickness; Ø5 x Ø9 x 1 (x160), 6 x 10 x 1 (x100), 8 x 12 x 1 (x100), 10 x 14 x 1 (x100), 12 x 18 x 1.5 (x60), 14 x 20 x 1.5 (x40), 16 x 22 x 1.5 (x20), 18 x 24 x 1.5mm (x20)

225pc Air Conditioning Rubber O-Ring Assortment - Metric Model No. ACOR225 Manufactured from HNBR. Designed for use with Freon R134a making them suitable for automotive air conditioning units and many other applications. Contents (Approximate Quantity): ID x Thickness; Ø3 x 1, 4 x 1, 4.5 x 2, 5 x 2, 6 x 2, 6 x 2.5, 6 x 3, 7 x 2, 8 x 2mm (20 of each), 9 x 2, 10 x 2, 12 x 3, 13 x 3, 14 x 2.5, 17 x 2.5, 18 x 4, 20 x 2, 22 x 2mm (5 of each)

407pc Rubber O-Ring Assortment - Imperial Model No. BOR407

419pc Rubber O-Ring Assortment - Metric Model No. BOR419

Manufactured from Buna-N.

Manufactured from Buna-N. Contents (Approximate Quantity): ID x Thickness; Ø18 x 3.5, 20 x 3.5,22 x 3.5, 23.5 x 3.5, 25 x 3.5, 26.5 x 3.5, 28 x 3.5, 30 x 3.5, 31 x 3.5, 33 x 3.5, 34.5 x 3.5, 36 x 3.5, 38 x 3.5, 41 x 3.5, 44 x 3.5, 47 x 3.5, 50 x 3.5mm (10 of each), 11 x 2.5, 14 x 2.5, 19 x 2.5, 22 x 2.5mm (13 of each), 10 x 2.5, 13 x 2.5,16 x 2.5, 18 x 2.5, 21 x 2.5mm (14 of each), 5 x 2mm (x18), 3 x 1.5, 4.4 x 2mm (20 of each), 7 x 1.5, 10 x 1.5, 13 x 1.5 (23 of each)

Contents (Approximate Quantity): ID x Thickness; Ø1/8" x 1/16", 3/16" x 1/16", 1/4" x 1/16", 5/16" x 1/16", 3/8" x 1/16", 1/2" x 1/16" (20 of each), 3/8" x 3/32", 7/16" x 3/32", 1/2" x 3/32", 9/16" x 3/32", 5/8" x 3/32",11/16" x 3/32", 3/4" x 3/32", 13/16" x 3/32", 7/8" x 3/32" (13 of each), 3/4" x1/8", 13/16" x 1/8", 7/8" x 1/8", 15/16" x 1/8", 1" x 1/8", 1-1/16" x 1/8", 1-1/8" x1/8", 1-3/16" x 1/8", 1-1/4" x 1/8", 1-5/16" x 1/8", 1-3/8" x 1/8", 1-7/16" x 1/8",1-1/2" x 1/8", 1-5/8" x 1/8", 1-3/4" x 1/8", 1-7/8" x 1/8", 2" x 1/8" (10 of each)

250pc Copper Sealing Washer Assortment - Metric Model No. AB020CW

250pc Diesel Injector Copper Washer Assortment - Metric Model No. AB027CW

Contents (Approximate Quantity): ID x OD x Thickness; Ø5 x Ø9 x 1 (x20), 6 x 10 x 1 (x20), 6 x 12 x 1 (x20), 8 x 12 x 1 (x20), 8 x 14 x 1 (x20), 10 x 14 x 1 (x20), 10 x 16 x 1 (x20), 12 x 16 x 1.5 (x15), 12 x 18 x 1.5 (x15), 14 x 18 x 1.5 (x15), 14 x 20 x 1.5 (x15), 16 x 20 x 1.5 (x10), 16 x 22 x 1.5 (x10), 18 x 22 x 1.5 (x10), 18 x 24 x 1.5 (x10), 20 x 26 x 1.5mm (x10)

Contents (Approximate Quantity): ID x OD x Thickness; Ø6 x Ø10 x 1 (x20), 10 x 13.5 x 1 (x20), 10 x 20 x 1 (x20), 12 x 16 x 1.5 (x20), 14 x 18 x 1.5 (x20),16 x 20 x 1.5 (x15), 21 x 25 x 1 (x10), 8 x 11.5 x 1 (x20), 10 x 14 x 1 (x20), 10 x 20 x 2 (x20), 12 x 18 x 1.5 (x20), 14 x 20 x 1.5 (x20), 17 x 21 x 1.5 (x15), 22 x 27 x 1mm (x10)

84pc Bonded Seal Assortment - BSP Model No. AB011DS

88pc Bonded Seals Assortment - Metric Model No. AB010DS

Contents (Approximate Quantity): 5/8" (x8), 3/4" (x8), 1" (x8)

Contents (Approximate Quantity): M12 (x15), M14 (x15), M16 (x15)

Ø1/8" (x20), 1/4" (x15), 3/8" (x15), 1/2" (x10),

M18 (x8), M20 (x5), M22 (x5), M24 (x5), M10 (x20),

Assortment Boxes 1091

32pc Speedfit® Pneumatic Coupling Assortment - Ø6 & Ø8mm Metric 20pc Speedfit® Pneumatic Coupling Assortment - Ø10mm Metric Model No. AB069JG Model No. AB070JG Contents (Approximate Quantity): Ø6mm; Straight (x4), Elbow (x4), Equal Tee (x4), Stem Elbow (x4), Ø8mm; Straight (x4), Elbow (x4), Equal Tee (x4), Stem Elbow (x4)

Contents (Approximate Quantity): Straight (x4), Elbow (x4), Equal Tee (x4), Stem Elbow (x4), Thread Adaptor Ø10mm x 1/4" (x4)

15pc Speedfit® Pneumatic Coupling Assortment - Ø12mm Metric Model No. AB071JG

30pc Speedfit® Pneumatic Coupling Thread Adaptor Assortment Metric & Imperial Model No. AB072JG

Contents (Approximate Quantity): Stem Elbow (x4)

Straight (x5), Elbow (x4), Equal Tee (x2),

Contents (Approximate Quantity): Metric & Imperial Thread Adaptors; Ø6mm x Ø1/4" (x5), 8mm x 1/4" (x3), 8mm x 3/8" (x5), 10mm x 1/4" (x5), Brass Superthread Adaptors; Ø6mm x Ø1/8" (x3), 8mm x 1/8" (x3), 8mm x 1/4" (x3), 12mm x 3/8" (x3)

200pc Brake Pipe Nut Assortment - Metric & Imperial Model No. AB068BPN Contents (Approximate Quantity): Ø3/16" Pipe; 3/8"UNF x 24tpi Long Female (x10), M10 x 1mm Short Female (x30), 3/8"UNF x 24tpi Long Male (x10), M10 x 1mm Short Male (x100), M10 x 1mm Long Male (x5), M10 x 1mm Full Thread Male (x15), M10 x 1.25mm Long Male (x5), M10 x 1.25mm Short Male (x5), 3/8"BSF x 20tpi Long Male (x5), M12 x 1mm Part Thread Male (x5), Ø1/4" Pipe; 7/16"UNF x 20tpi Male (x5), 12mm x 1mm Male (x5)

150pc R-Clip Assortment Model No. AB002RC Contents (Approximate Quantity): 2.8 x 42 (x25), 3.5 x 45 (x20), 4 x 75mm (x8)

2 x 33 (x28), 2 x 40 (x25), 2.4 x 31 (x44),

130pc Grease Nipple Assortment - Metric, BSP, UNF Model No. AB009GN

115pc Grease Nipple Assortment - Metric Model No. AB008GN Contents (Approximate Quantity): Straight; M6 x 1 (x10), M8 x 1 (x10), M8 x 1.25 (x10), M10 x 1mm (x10), 45° Angle; M6 x 1 (x10), M8 x 1 (x5), M8 x 1.25 (x10), M10 x 1mm (x10), 90° Angle; M6 x 1 (x10), M8 x 1 (x10), M8 x 1.25 (x10), M10 x 1mm (x10) ®

Contents (Approximate Quantity): Straight Metric; M6 x 1 (x10), M8 x 1 (x10), M10 x 1mm (x10), Straight Imperial; 1/4"BSP (x10), 1/4"UNF (x10), 1/8"UNF (x10), 45° Angle Metric; M6 x 1 (x10), M8 x 1 (x10), M10 x 1mm (x10). 45° Angle Imperial; 1/4"UNF (x10), 1/4"BSP (x10), 1/8"BSP (x10), 90° Angle; M8 x 1.25mm (x10)

1092 Assortment Boxes

260pc Red Crimp Terminal Assortment Model No. AB039RT

280pc Blue Crimp Terminal Assortment Model No. AB040BT

Contents (Approximate Quantity): Bullet; Ø4mm (x30), Butt Connector; Ø3.3mm (x30), Easy-Entry Fork; Ø3.7mm (4BA) (x10), Ø5.3mm (2BA) (x10), Easy-Entry Pin; 12mm x Ø1.9mm (x10), Easy-Entry Ring; Ø5.3mm (2BA) (x10), Ø8.4mm (5/16") (x10), Female Socket; Ø4mm (x20), Fully Insulated Female; 4.7mm (x20), 6.3mm (x10), Piggy-Back; 6.3mm (x20), Push-On Female; 2.8mm (x20), 4.8mm (x20), 6.3mm (x20), Push-On Male; 6.3mm (x20)

Contents (Approximate Quantity): Bullet; Ø5mm (x35), Butt Connector; Ø4.5mm (x40), Easy-Entry Blade; 18 x 2.3mm (x40), Easy-Entry Fork; Ø3.7mm (4BA) (x10), Ø5.3mm (2BA) (x10), Easy-Entry Pin; 12mm x Ø1.9mm (x10), Easy-Entry Ring; Ø4.3mm (4BA) (x10), Ø6.4mm (1/4") (x10), Ø10.5mm (3/8") (x10), Female Socket; Ø5mm (x35), Fully Insulated Female; 4.8mm (x10), 6.3mm (x10), Piggy-Back; 6.3mm (x20), Push-On Female; 4.8mm (x10), 6.3mm (x10), Push-On Male; 6.3mm (x10)

140pc Yellow Crimp Terminal Assortment Model No. AB041YT

200pc Blue, Red & Yellow Crimp Terminal Assortment Model No. AB038MT

Contents (Approximate Quantity): Bullet; Ø5mm (x10), Butt Connector; Ø5.5mm (x20), Easy-Entry Pin; 14 x Ø2.9mm (x10), Easy-Entry Ring; Ø5.3mm (2BA) (x10), Ø6.4mm (1/4") (x10), Ø8.4mm (5/16") (x10), Ø10.5mm (3/8") (x10), Ø13mm (1/2") (x10), Female Socket; Ø5mm (x10), Fully Insulated Female; 6.3mm (x10), Push-On Female; 6.3mm (x10), 9.5mm (x10), Push-On Male; 6.3mm (x10)

142pc Adhesive Lined Heat Shrink Terminal Assortment - Blue, Red, Yellow Model No. AB037HT Contents (Approximate Quantity): Red; Butt Connector; 3.7mm (x20), Push-On Female; 6.4mm (x10), Push-On Male; 6.3mm (x10), Ring; 5.3mm (x7), 6.4mm (x7), Blue; Butt Connector; 5mm (x20), Push-On Female; 6.4mm (x10), Push-On Male; 6.3mm (x10), Ring; 6.4mm (x7), 8.4mm (x7), Yellow; Butt Connector; 6.5mm (x20), Ring; 6.4mm (x7), 8.4mm (x7)

Electrical Terminal Combination Kit Model No. COMBOETK For details, see page 1129.

Contents (Approximate Quantity): Blue; Bullet; Ø5mm (x10), Butt Connector; Ø4.5mm (x30), Easy-Entry Ring; Ø8.4mm (5/16") (x10), Female Socket; Ø5mm (x10), Fully Insulated Female; 6.3mm (x10), Push-On Female; 6.3mm (x10), Push-On Male; 6.3mm (x10), Red; Bullet; Ø4mm (x10), Butt Connector; Ø3.3mm (x20), Female Socket; Ø4mm (x10), Fully Insulated Female; 6.3mm (x10), Push-On Female; 2.8mm (x10), Push-On Male; 6.3mm (x10), Yellow; Butt Connector; Ø5.5mm (x20), Easy-Entry Ring; Ø6.4mm (1/4") (x10), Ø8.4mm (5/16") (x10)

52pc Copper Lug Terminal Assortment Model No. AB016CT Contents (Approximate Quantity): Cable Size x Bolt Hole Size; 10mm² x Ø8mm (x6), 16mm² x 8mm (x6), 25mm² x 6mm (x5), 25mm² x 8mm (x5), 35mm² x 8mm (x5), 35mm² x 10mm (x5), 50mm² x 8mm (x5), 50mm² x 10mm (x5), 70mm² x 10mm (x5), 70mm² x 12mm (x5)

Automotive Blade Fuse Combination Kit Model No. COMBOABF For details, see page 1129.

Assortment Boxes 1093 Heat Shrink Tubing Model No. SEE BELOW Thin wall heat shrink tubing with shrink ratio of 2:1. RoHS Compliant.

180pc 50 & 100mm Heat Shrink Tubing Assortment - Black Model No. HST501B Length: Size Unshrunk (Approximate Quantity): Length: Size Unshrunk (Approximate Quantity):

50mm Ø3.2 (x60), Ø4.8 (x40), Ø6.4mm (x20) 100mm Ø3.2 (x30), Ø4.8 (x20), Ø6.4mm (x10)

180pc 50 & 100mm Heat Shrink Tubing Assortment - Black & Red Model No. HST501BR Length: Size Unshrunk (Approximate Quantity): Length: Size Unshrunk (Approximate Quantity):

50mm Ø3.2 (x60), Ø4.8 (x40), Ø6.4mm (x20) 100mm Ø3.2 (x30), Ø4.8 (x20), Ø6.4mm (x10)

180pc 50 & 100mm Heat Shrink Tubing Assortment - Mixed Colours Model No. HST501MC Length: Size Unshrunk (Approximate Quantity): Length: Size Unshrunk (Approximate Quantity):

50mm Ø3.2 (x60), Ø4.8 (x40), Ø6.4mm (x20) 100mm Ø3.2 (x30), Ø4.8 (x20), Ø6.4mm (x10)

95pc 100mm Heat Shrink Tubing Assortment - Black Model No. HST100B Length: Size Unshrunk (Approximate Quantity): Ø12.7mm (x5)

100mm Ø3.2 (x30), Ø4.8 (x40), Ø6.4 (x10), Ø9.5 (x10),

95pc 100mm Heat Shrink Tubing Assortment - Black & Red Model No. HST100BR Length: Size Unshrunk (Approximate Quantity): Ø12.7mm (x5)

100mm Ø3.2 (x30), Ø4.8 (x40), Ø6.4 (x10), Ø9.5 (x10),

95pc 100mm Heat Shrink Tubing Assortment - Mixed Colours Model No. HST100MC Length: Size Unshrunk (Approximate Quantity): Ø12.7mm (x5)

100mm Ø3.2 (x30), Ø4.8 (x40), Ø6.4 (x10), Ø9.5 (x10),

190pc 50mm Heat Shrink Tubing Assortment - Mixed Colours Model No. HST50MC

60pc Crocodile Clip Assortment - Black & Red Model No. AB023CA

Length: Size Unshrunk (Approximate Quantity):

Contents (Approximate Quantity): Insulated; 45 (x16), 55 (x12), 60mm (x8)

50mm Ø3.2 (x70), Ø4.8 (x70), Ø6.4mm (x50)

For our full range of Heat Torches, see pages 226 to 228

Non-Insulated; 55 (x20), 70 (x2), 75mm (x2),

1094 Assortment Boxes

590pc 50, 100, 150 & 200mm Heat Shrink Tubing Assortment Mixed Colours Model No. HST590MC Shrink ratio 2:1 when heated to 90Â°C. Contents (Approximate Quantity):

261pc 100 & 150mm Adhesive Lined Heat Shrink Tubing Assortment Mixed Colours Model No. HSTAL261MC Contents (Approximate Quantity):

Assortment Box with 8 Removable Dividers Model No. ABBOXMED

Assortment Box with 12 Removable Dividers Model No. ABBOXLAR

Overall Size (W x D x H): Single Partitioned Section (W x D x H):

100pc Automotive MINI Blade Fuse Assortment Model No. BCF100 Contents (Approximate Quantity):

120pc Automotive Standard Blade Fuse Assortment Model No. BCF120 Contents (Approximate Quantity):

Sealey Display Stand - Assortment Boxes Model No. SDSAB

36pc Automotive MAXI Blade Fuse Assortment Model No. BCF36 Contents (Approximate Quantity):

1096 Red Crimp Terminals Red terminals on this page are suitable for cable size 22-18 AWG Easy-Entry terminals are designed to help you slide the cable in without fouling.

Ø3.3mm Red Butt Connector Terminal Model No. RT29 Size: Pack Quantity:

Ø3.3mm 100

Red Easy-Entry Fork Terminals Model No. SEE BELOW Model No:

Red Push-On Female Terminals Model No. SEE BELOW Model No:

Size: 2.8mm 4.8mm 6.3mm

Pack Quantity: 100 100 100

Ø4mm Red Female Socket Terminal Model No. RT23 Size: Pack Quantity:

Size: Ø3.7mm (4BA) Ø5.3mm (2BA)

Pack Quantity: 100 100

Ø4mm 100

12 x Ø1.9mm Red Easy-Entry Pin Terminal Model No. RT18 Size: Pack Quantity:

Ø4mm Red Male Bullet Terminal Model No. RT11 Size: Pack Quantity:

12 x Ø1.9mm 100

Ø4mm 100

18 x 2.3mm Red Blade Terminal Model No. RT10 Size: Pack Quantity:

Red Fully Insulated Female Terminals Model No. SEE BELOW Model No:

Size: 2.8mm 4.7mm 6.3mm

Pack Quantity: 100 100 100

Red Easy-Entry Ring Terminals Model No. SEE BELOW Model No:

6.3mm Red Push-On Male Terminal Model No. RT22 Size: Pack Quantity:

Size: Ø4.3mm (4BA) Ø5.3mm (2BA) Ø6.4mm (1/4") Ø8.4mm (5/16")

Pack Quantity: 100 100 100 100

Red Quick Splice Connector Model No. QSPR Cable Size: Pack Quantity:

22-18 AWG 100

6.3mm 100

6.3mm Red Piggy-Back Terminal Model No. RT17 Size: Pack Quantity:

18mm x 2.3mm 100

6.3mm 100

All terminals in the Sealey range are supplied in resealable bags.

260pc Red Crimp Terminal Assortment Model No. AB039RT Contents (Approximate Quantity): Bullet; Ø4mm (x30), Butt Connector; Ø3.3mm (x30), Easy-Entry Fork; Ø3.7mm (4BA) (x10), Ø5.3mm (2BA) (x10), Easy-Entry Pin; 12mm x Ø1.9mm (x10), Easy-Entry Ring; Ø5.3mm (2BA) (x10), Ø8.4mm (5/16") (x10), Female Socket; Ø4mm (x20), Fully Insulated Female; 4.7mm (x20), 6.3mm (x10), Piggy-Back; 6.3mm (x20), Push-On Female; 2.8mm (x20), 4.8mm (x20), 6.3mm (x20), Push-On Male; 6.3mm (x20)

200pc Blue, Red & Yellow Crimp Terminal Assortment Model No. AB038MT Contents (Approximate Quantity): Blue; Bullet; Ø5mm (x10), Butt Connector; Ø4.5mm (x30), Easy-Entry Ring; Ø8.4mm (5/16") (x10), Female Socket; Ø5mm (x10), Fully Insulated Female; 6.3mm (x10), Push-On Female; 6.3mm (x10), Push-On Male; 6.3mm (x10), Red; Bullet; Ø4mm (x10), Butt Connector; Ø3.3mm (x20), Female Socket; Ø4mm (x10), Fully Insulated Female; 6.3mm (x10), Push-On Female; 2.8mm (x10), Push-On Male; 6.3mm (x10), Yellow; Butt Connector; Ø5.5mm (x20), Easy-Entry Ring; Ø6.4mm (1/4") (x10), Ø8.4mm (5/16") (x10)

Blue Crimp Terminals 1097 Blue terminals on this page are suitable for cable size 16-14 AWG Easy-Entry terminals are designed to help you slide the cable in without fouling.

Ø5mm Blue Male Bullet Terminal Model No. BT11

12 x Ø1.9mm Blue Easy-Entry Pin Terminal Model No. BT18

Size: Pack Quantity:

Ø5mm 100

Size: Pack Quantity:

12 x Ø1.9mm 100

Blue Push-On Female Terminals Model No. SEE BELOW Model No:

Size: 4.8mm 6.3mm

Pack Quantity: 100 100

18 x 2.3mm Blue Blade Terminal Model No. BT10 Size: Pack Quantity:

18mm x 2.3mm 100

Blue Fully Insulated Female Terminals Model No. SEE BELOW Model No:

Size: 4.8mm 6.3mm

Pack Quantity: 100 100

Blue Easy-Entry Ring Terminals Model No. SEE BELOW Model No:

6.3mm Blue Piggy-Back Terminal Model No. BT17 Size: Pack Quantity:

6.3mm 100

Size: Ø4.3mm (4BA) Ø5.3mm (2BA) Ø6.4mm (1/4") Ø8.4mm (5/16") Ø10.5mm (3/8")

Pack Quantity: 100 100 100 100 100

280pc Blue Crimp Terminal Assortment Model No. AB040BT Contents (Approximate Quantity): Bullet; Ø5mm (x35), Butt Connector; Ø4.5mm (x40), Easy-Entry Blade; 18mm x 2.3mm (x40), Easy-Entry Fork; Ø3.7mm (4BA) (x10), Ø5.3mm (2BA) (x10), Easy-Entry Pin; 12mm x Ø1.9mm (x10), Easy-Entry Ring; Ø4.3mm (4BA) (x10), Ø6.4mm (1/4") (x10), Ø10.5mm (3/8") (x10), Female Socket; Ø5mm (x35), Fully Insulated Female; 4.8mm (x10), 6.3mm (x10), Piggy-Back; 6.3mm (x20), Push-On Female; 4.8mm (x10), 6.3mm (x10), Push-On Male; 6.3mm (x10)

6.3mm Blue Push-On Male Terminal Model No. BT21 Size: Pack Quantity:

6.3mm 100

Blue Easy-Entry Fork Terminals Model No. SEE BELOW Model No:

Ø4.5mm Blue Butt Connector Terminal Model No. BT12 Size: Pack Quantity:

Size: Ø3.7mm (4BA) Ø5.3mm (2BA)

Pack Quantity: 100 100

Ø4.5mm 100

120pc Assorted Wire T-Tap Set Model No. WT120 Allows for a wire to be connected into the electrical circuit. Two piece design allows the second wire to be of automotive wiring.

Ø5mm Blue Female Socket Terminal Model No. BT22 Size: Pack Quantity:

Blue Quick Splice Connector Model No. QSPB Ø5mm 100

Cable Size: Pack Quantity:

16-14 AWG 100

Contents (Approximate Quantity): Red Splice: Red Connector: Blue Splice: Blue Connector: Yellow Splice: Yellow Connector:

For our full range of Crimping Tools, see pages 483 to 486

0.5-1mm² (x20) 0.5-1.5mm² (x20) 1-2.5mm² (x20) 1.5-2.5mm² (x20) 4mm² (x20) 4-6mm² (x20)

1098 Yellow Crimp Terminals & Superseal Connectors Yellow terminals on this page are suitable for cable size 12-10 AWG Easy-Entry terminals are designed to help you slide the cable in without fouling.

Yellow Push-On Female Terminals Model No. SEE BELOW 6.3mm 9.5mm

100 100

6.3mm Yellow Fully Insulated Female Terminal Model No. YT11 Ø6.3mm 100

Pack Quantity:

Yellow Easy-Entry Ring Terminals Model No. SEE BELOW 6.3mm Yellow Push-On Male Terminal Model No. YT15 6.3mm 100

Pack Quantity:

Ø5.3mm (2BA) Ø6.4mm (1/4") Ø8.4mm (5/16") Ø10.5mm (3/8") Ø13mm (1/2")

100 100 100 100 100

Superseal Connectors Model No. SEE BELOW Designed for applications when a waterproof joint is required and is suitable for cable sizes from 0.5mm² to 1.5mm². Kit contains housing, terminals and seals. Model No:

Ø5.5mm Yellow Butt Connector Terminal Model No. YT10 Ø5.5mm 100

Pack Quantity:

Ø5mm Yellow Female Socket Terminal Model No. YT22 Ø5mm 100

Pack Quantity:

Ø5mm Yellow Bullet Terminal Model No. YT21 Pack Quantity:

Ø5mm 100

14 x Ø2.9mm Yellow Easy-Entry Pin Terminal Model No. YT23 Pack Quantity:

14mm x Ø2.9mm 100

140pc Yellow Crimp Terminal Assortment Model No. AB041YT Contents (Approximate Quantity): Bullet; Ø5mm (x10), Butt Connector; Ø5.5mm (x20), Easy-Entry Pin; 14 x Ø2.9mm (x10), Easy-Entry Ring; Ø5.3mm (2BA) (x10), Ø6.4mm (1/4") (x10), Ø8.4mm (5/16") (x10), Ø10.5mm (3/8") (x10), Ø13mm (1/2") (x10), Female Socket; Ø5mm (x10), Fully Insulated Female; 6.3mm (x10), Push-On Female; 6.3mm (x10), 9.5mm (x10), Push-On Male; 6.3mm (x10)

Port No: 1-Way 1-Way 1-Way 2-Way 2-Way 2-Way 3-Way 3-Way 3-Way 4-Way 4-Way 4-Way 5-Way 5-Way 5-Way 6-Way

Connector: Female Male Male & Female Female Male Male & Female Female Male Male & Female Female Male Male & Female Female Male Male & Female Male & Female

Pack Qty: 5 5 1 5 5 1 5 5 1 3 3 1 3 3 1 1

350pc Superseal Male & Female Connector Assortment Model No. SSCSET1 Designed for applications when a waterproof joint is required and is suitable for cable sizes from 0.5mm² to 1.5mm². Kit contains male and female housing, terminals and seals. Waterproof to IP65. Contents (Approximate Quantity): 1-Way Female Connector (x6), 1-Way Male Connector (x6), 2-Way Female Connector (x6), 2-Way Male Connector(x6), 3-Way Female Connector (x4), 3-Way Male Connector (x4), 4-Way Female Connector (x4),4-Way Male Connector (x4), 5-Way Female Connector (x3), 5-Way Male Connector (x3), 6-Way Female Connector (x2), 6-Way Male Connector (x2), Rubber Seal (x100), Female Pin (x100), Male Pin (x100)

Heat Shrink Terminals 1099 Heat Shrink Terminals Model No. SEE BELOW Fast shrink adhesive lined transparent tubing. Available in colour-coded sizes.

Red 22-18 AWG

Blue 16-14 AWG

Ø4.8mm Red Heat Shrink Butt Connector Terminals Model No. SEE BELOW Model No:

Size: Ø4.8mm Ø4.8mm

Yellow 12-10 AWG

Ø5.8mm Blue Heat Shrink Butt Connector Terminals Model No. SEE BELOW Pack Quantity: 50 100

Model No:

Size: Ø5.8mm Ø5.8mm

Ø6.8mm Yellow Heat Shrink Butt Connector Terminal Model No. YTSB50 Pack Quantity: 50 100

Size: Pack Quantity:

Ø6.8mm 50

Red Heat Shrink Ring Terminals Model No. SEE BELOW

Blue Heat Shrink Ring Terminals Model No. SEE BELOW

Yellow Heat Shrink Ring Terminals Model No. SEE BELOW

Model No:

Size: Ø5.3mm (2BA) Ø6.4mm (1/4")

Pack Quantity: 25 25

6.4mm Red Female Push-On Heat Shrink Terminal Model No. RTSPF25 Size: Pack Quantity:

Pack Quantity: 25 25

6.4mm Blue Female Push-On Heat Shrink Terminal Model No. BTSPF25 6.4mm 25

6.3mm Red Male Push-On Heat Shrink Terminal Model No. RTSPM25 Size: Pack Quantity:

Size: Ø6.4mm (2BA) Ø8.4mm (1/4")

Size: Pack Quantity:

6.4mm 25

Cable Size: Pack Quantity:

12-10 AWG 25

White Heat Shrink Solder Butt Connector Terminal Model No. WTSSB25

Size: Pack Quantity:

6.3mm 25

Red Heat Shrink Solder Butt Connector Terminal Model No. RTSSB25

Blue Heat Shrink Solder Butt Connector Terminal Model No. BTSSB25

Cable Size: Pack Quantity:

22-18 AWG 25

Pack Quantity: 25 25

Yellow Heat Shrink Solder Butt Connector Terminal Model No. YTSSB25

6.3mm Blue Male Push-On Heat Shrink Terminal Model No. BTSPM25 6.3mm 25

Size: Ø6.4mm (2BA) Ø8.4mm (1/4")

Cable Size: Pack Quantity:

24-22 AWG 25

16-14 AWG 25

142pc Adhesive Lined Heat Shrink Terminal Assortment - Blue, Red, Yellow Model No. AB037HT Transparent, adhesive lined heat shrink terminals. Contents (Approximate Quantity): Red; Butt Connectors; Ø3.7mm (x20), Push-On Female; 6.4mm (x10), Push-On Male; 6.3mm (x10), Ring; 5.3mm (x7), 6.4mm (x7), Blue; Butt Connectors; Ø5mm (x20), Push-On Female; 6.4mm (x10), Push-On Male; 6.3mm (x10), Ring; 6.4mm (x7), 8.4mm (x7), Yellow; Butt Connectors; Ø6.5mm (x20), Ring; 6.4mm (x7), 8.4mm (x7)

Cold Seal Butt Connectors Model No. SEE BELOW One step termination and environmental protection. Butt connectors require no heat for installation, easy to install entry under permanent pressure or weight.

Ø4.3mm Ø4.5mm Ø5.9mm Cable Size: 26-20 AWG 18-16 AWG 14-12 AWG Range: -55° to +150°C -55° to +150°C -55° to +150°C Pack Quantity: 10 10 10

For our full range of Heat Torches, see pages 226 to 228

Automotive Fuses 1101

Automotive MICRO Blade Fuses Model No. SEE BELOW Model No: MIBF3 MIBF5 MIBF75 MIBF10 MIBF15 MIBF20 MIBF25 MIBF30

Rating: 3A 5A 7.5A 10A 15A 20A 25A 30A

Pack Qty: 50 50 50 50 50 50 50 50

Automotive MINI Blade Fuses Model No. SEE BELOW

Automotive MICRO II Blade Fuses Model No. SEE BELOW Model No: M2BF5 M2BF75 M2BF10 M2BF15 M2BF20 M2BF25 M2BF30

Rating: 5A 7.5A 10A 15A 20A 25A 30A

Pack Qty: 50 50 50 50 50 50 50

Model No: MBF250 MBF350 MBF450 MBF550 MBF7550 MBF1050 MBF1550 MBF2050 MBF2550 MBF3050

Rating: 2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A

Pack Qty: 50 50 50 50 50 50 50 50 50 50

Automotive Standard Blade Fuses Model No. SEE BELOW Model No: SBF350 SBF550 SBF7550 SBF1050 SBF1550 SBF2050 SBF3050

Rating: 3A 5A 7.5A 10A 15A 20A 30A

Pack Qty: 50 50 50 50 50 50 50

Automotive MAXI Blade Fuses Model No. SEE BELOW Model No: MF2010 MF3010 MF4010 MF5010 MF6010 MF7010 MF8010

Rating: 20A 30A 40A 50A 60A 70A 80A

Pack Qty: 10 10 10 10 10 10 10

Fuse Holders

See our full range of Fuse Holders on page 1095.

100pc Automotive MINI Blade Fuse Assortment Model No. BCF100

120pc Automotive Standard Blade Fuse Assortment Model No. BCF120

36pc Automotive MAXI Blade Fuse Assortment Model No. BCF36

Contents (Approximate Qty): 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A (10 of each)

Contents (Approximate Qty): 30A (15 of each), 10A (x30)

Contents (Approximate Qty): 20A, 30A, 40A, 50A (6 of each), 60A, 70A, 80A, 100A (3 of each)

3A, 5A, 7.5A, 15A, 20A,

Rubber Lined P-Clips Model No. SEE BELOW Model No: PCJ5 PCJ6 PCJ8 PCJ10 PCJ13 PCJ16 PCJ21 PCJ25 PCJ29 PCJ32 PCJ35 PCJASS

Size: Ø5mm Ø6mm Ø8mm Ø10mm Ø13mm Ø16mm Ø21mm Ø25mm Ø29mm Ø32mm Ø35mm Ø6, 8, 10, 13, 16, 21mm

Pack Qty: 25 25 25 25 25 25 25 25 25 25 25 60 (10 of each)

Split Convoluted Cable Sleeving Model No. SEE BELOW Temperature range: -40°C to +135°C.

10m Spiral Wrap Cable Sleeving Model No. SEE BELOW Temperature range of -30°C to +100°C. Model No: SWS48 SWS816 SWS1428 SWS2244

Colour: Black Black Black Black

Type: Spiral Spiral Spiral Spiral

Size: Ø4-8mm Ø8-16mm Ø14-28mm Ø22-44mm

Model No: CTS0710 CTS0750 CTS07100 CTS07200 CTS1210 CTS1250 CTS12100 CTS12200 CTS1710 CTS2210

For all of our latest products and promotions visit www.sealey.co.uk

Type: Split Split Split Split Split Split Split Split Split Split

Length: 10m 50m 100m 200m 10m 50m 100m 200m 10m 10m

Size: Ø7-10mm Ø7-10mm Ø7-10mm Ø7-10mm Ø12-16mm Ø12-16mm Ø12-16mm Ø12-16mm Ø17-21mm Ø22-27mm

1102 Heat Shrink Tubing Heat Shrink Tubing Model No. SEE BELOW Thin wall heat shrink tubing with shrink ratio of 2:1. RoHS Compliant. All quantities are approximate.

180pc 50 & 100mm Heat Shrink Tubing Assortment - Black Model No. HST501B

180pc 50 & 100mm Heat Shrink Tubing Assortment - Black & Red Model No. HST501BR

180pc 50 & 100mm Heat Shrink Tubing Assortment - Mixed Colours Model No. HST501MC

Length: Size (Quantity): Length: Size (Quantity):

50mm Ø3.2 (x60), Ø4.8 (x40), Ø6.4mm (x20) 100mm Ø3.2 (x30), Ø4.8 (x20), Ø6.4mm (x10)

95pc 100mm Heat Shrink Tubing Assortment - Black Model No. HST100B

95pc 100mm Heat Shrink Tubing Assortment - Black & Red Model No. HST100BR

95pc 100mm Heat Shrink Tubing Assortment - Mixed Colours Model No. HST100MC

Length: 100mm Size (Quantity): Ø3.2 (x30), Ø4.8 (x40), Ø6.4 (x10), Ø9.5 (x10), Ø12.7mm (x5)

Black Heat Shrink Tubing Model No. SEE BELOW

Red Heat Shrink Tubing Model No. SEE BELOW

Model No: HST3215 HST4812 HST6412 HST9508 HST12708

Size: Ø3.2mm - 1.6mm Ø4.8mm - 2.4mm Ø6.4mm - 3.2mm Ø9.5mm - 4.8mm Ø12.7mm - 6.4mm

Tube Length: 15m 12m 12m 8m 8m

Model No: HST3215R HST4812R HST6412R HST9508R HST12708R

Size: Ø3.2mm - 1.6mm Ø4.8mm - 2.4mm Ø6.4mm - 3.2mm Ø9.5mm - 4.8mm Ø12.7mm - 6.4mm

Tube Length: 15m 12m 12m 8m 8m

Resealable Bag Resealable Bag

190pc 50mm Heat Shrink Tubing Assortment - Mixed Colours Model No. HST50MC Length: Size (Quantity):

50mm Ø3.2 (x70), Ø4.8 (x70), Ø6.4mm (x50)

Resealable Bag

100pc 200mm Heat Shrink Tubing Black Model No. HST200B

100pc 200mm Heat Shrink Tubing Black & Red Model No. HST200BR

100pc 200mm Heat Shrink Tubing Mixed Colours Model No. HST200MC

Length: 200mm Size (Quantity): Ø3.2 (x30), Ø4.8 (x30), Ø6.4 (x20), Ø9.5 (x10), Ø12.7mm (x10)

Length: 200mm Size (Quantity): Ø3.2 (x32), Ø4.8 (x32), Ø6.4 (x20), Ø9.5 (x8), Ø12.7mm (x8)

Heat Shrink & Cable Carrier 1103

Resealable Bag

72pc 200mm Heat Shrink Dual Wall Adhesive Lined Tubing - Black Model No. HSTAL72B

72pc 200mm Heat Shrink Dual Wall Adhesive Lined Tubing - Black & Red Model No. HSTAL72BR

72pc 200mm Heat Shrink Dual Wall Adhesive Lined Tubing Mixed Colours Model No. HSTAL72MC

Various sizes from Ø2.4mm to Ø12.7mm. Shrink ratio 3:1 when heated to 90°C.

Contents (Approximate Qty): Ø2.4 (x18), Ø3.2 (x18), Ø4.8 (x12), Ø6.4 (x12), Ø9.5 (x6), Ø12.7 (x6)

590pc 50, 100, 150 & 200mm Heat Shrink Tubing Assortment Mixed Colours Model No. HST590MC

261pc 100 & 150mm Adhesive Lined Heat Shrink Tubing Assortment - Mixed Colours Model No. HSTAL261MC

Shrink ratio 2:1 when heated to 90°C.

Shrink ratio 3:1 when heated to 100°C.

Contents (Approximate Quantity): 50mm; Ø1.2 (x100), Ø1.6 (x100), 100mm; Ø2.4 (x100), Ø3.2 (x100), Ø4.8 (x50), Ø6.4 (x50), Ø9.5 (x30), Ø12.7 (x30), 150mm; Ø19.1 (x15), 200mm; Ø25.4 (x15)

Contents (Approximate Quantity): 100mm; Ø2.4 (x90), Ø3.2 (x60), Ø4.8 (x36), Ø6.4 (x30), Ø9.5 (x18), Ø12.7 (x12), 150mm; Ø15.4 (x6), Ø19.1 (x6), Ø25.4 (x3)

Multi Reel Dispenser Cable Carrier Stand Model No. CC01 Cable dispenser for reels of wire or electrical cable. Folds Capacity: Optional Accessories: Overall Size (W x D x H):

45kg CC01WB 750 x 320 x 350mm

Wall Brackets for CC01 Cable Carrier Stand Model No. CC01WB Wall brackets for Model No. CC01 Cable Carrier Stand. Overall Size (W x D x H):137 x 40 x 185mm

For all of our latest products and promotions visit www.sealey.co.uk

1104 Automotive Cables

Thin Wall Automotive Cable Model No. SEE BELOW Thick Wall Automotive Cable Model No. SEE BELOW Thick wall single core PVC insulated automotive cable. Ideal for most popular vehicle applications. Always check the required amperage and mm² cable for your application Temperature Range: Model No: Amps: AC0507B 5A AC0507G 5A AC0507R 5A AC0806B 8A AC0806G 8A AC0806R 8A AC1704B 17A AC1704G 17A AC1704R 17A AC2725B 27A AC2725G 27A AC2725R 27A

Core Type: Single Single Single Single Single Single Single Single Single Single Single Single

Length: 7m 7m 7m 6m 6m 6m 4m 4m 4m 2.5m 2.5m 2.5m

-20ºC to +80ºC Section: Colour: 0.5mm Black 0.5mm Green 0.5mm Red 0.8mm Black 0.8mm Green 0.8mm Red 2mm Black 2mm Green 2mm Red 3mm Black 3mm Green 3mm Red

Flat, thick wall twin core cable supplied on a cardboard reel. Black sheath surrounding black and red cores. Cross sections of 2 x 1mm² (8.75A) and 2 x 2mm² (17.5A) available. RoHS compliant. Amps: 8.75A 17.5A

Core Type: Twin Twin

Length: 30m 30m

Section: 2 x 1mm 2 x 2mm

Colour: Red/Black Red/Black

Single core insulated battery/starter cable. Resistant to petrol, lubricating oils and diluted acids. Black or red outer sheath. RoHS compliant. Amps: 170A 170A

Core Type: Single Single

Length: 10m 10m

Section: 25mm 25mm

Colour: Black Red

Single core insulated battery/starter cable. Black or red outer sheath. Resistant to petrol, lubricating oils and diluted acids. RoHS compliant. Amps: 300A 300A

Core Type: Single Single

Core Type: Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single

Length: 50m 50m 50m 50m 50m 50m 50m 50m 50m 50m 50m 50m 50m 50m 30m 30m

Section: 1mm 1mm 1mm 1mm 1mm 1mm 1mm 2mm 2mm 2mm 2mm 2mm 2mm 2mm 3mm 3mm

Colour: Black Brown Blue Green Red White Yellow Black Brown Blue Green Red White Yellow Black Red

Flat, thin wall twin core cable supplied on a cardboard reel. Black sheath surrounding black and red cores. Cross sections of 2 x 1mm² (8.75A) and2 x 2mm² (17.5A) available. RoHS compliant. Model No: AC3220TWTN AC2830TWTN

Amps: 8.75A 17.5A

Core Type: Twin Twin

Length: 30m 30m

Section: 2 x 1mm 2 x 2mm

Colour: Red/Black Red/Black

Thin wall single core cable supplied on a cardboard reel. Cross section of 4.5mm² available in black and red. RoHS compliant. Model No: AC6530BK AC6530RE

Amps: 42A 42A

Core Type: Single Single

Length: 30m 30m

Section: 4.5mm 4.5mm

Colour: Black Red

30m Multi-Core Thin Wall Automotive Cable Model No. SEE BELOW

10m 300A Automotive Starter Cable Model No. SEE BELOW Model No: AC40SQBK AC40SQRE

Amps: 16.5A 16.5A 16.5A 16.5A 16.5A 16.5A 16.5A 25A 25A 25A 25A 25A 25A 25A 33A 33A

30m 42A Thin Wall Automotive Cable Model No. SEE BELOW

10m 170A Automotive Starter Cable Model No. SEE BELOW Model No: AC25SQBK AC25SQRE

Model No: AC3220BK AC3220BN AC3220BU AC3220GR AC3220RE AC3220WH AC3220YE AC2830BK AC2830BN AC2830BU AC2830GR AC2830RE AC2830WH AC2830YE AC4430BK AC4430RE

30m Thin Wall Flat Twin Automotive Cable Model No. SEE BELOW

30m Thick Wall Flat Twin Automotive Cable Model No. SEE BELOW

Model No: AC1430TWTK AC2830TWTK

Thin wall single core cable supplied on a cardboard reel. Cross sections 1mm² and 2mm² available in black, brown, blue, green, red, white and yellow. Cross section of 3mm² available in black and red. RoHS compliant.

Length: 10m 10m

Section: 40mm 40mm

Colour: Black Red

Thin wall multi-core cable supplied on a cardboard reel. Black outer sheath. RoHS compliant. Model No:

Amps: 14A 14A 16.5A, 25A

Core Type: 4 Core 7 Core 6 + 1 Core

Length: 30m 30m 30m

Section: 4 x 0.75mm 7 x 0.75mm 6 x 1mm2 1 x 2mm

Colour: Mixed Mixed Mixed

Battery Terminals 1105

52pc Copper Lug Terminal Assortment Model No. AB016CT

Copper Lug Terminals - Packs of 10 Model No. SEE BELOW Model No: LT108 LT168 LT256 LT258 LT3510 LT358 LT5010 LT508 LT7010 LT7012

Width (A): 12.6mm 12.6mm 15mm 15mm 15mm 15.2mm 18.5mm 18.5mm 21.4mm 21.4mm

Cable Size (B): 10mm 16mm 25mm 25mm 35mm 35mm 50mm 50mm 70mm 70mm

Bolt Hole Diameter (C): Ø8mm Ø8mm Ø6mm Ø8mm Ø10mm Ø8mm Ø10mm Ø8mm Ø10mm Ø12mm

12V Light-Duty Battery Terminals Model No. SEE BELOW Model No: BTP1 BTN2

Post Type: Positive Negative

Cable Size: 25mm 25mm

Pack Qty: 10 10

24V Heavy-Duty Battery Terminals Model No. SEE BELOW Model No: BTP21 BTN22

Post Type: Positive Negative

Cable Size: 70mm 70mm

Pack Qty: 5 5

12V-24V Anti-Theft Battery & Fuse Holder Model No. BTANT1224V Continuous Rate: Crank Rate: Voltage:

125A 500A 12V-24V

Length (D): 27mm 29.5mm 33mm 33mm 33mm 38mm 44.5mm 44.5mm 54.2mm 54.2mm

Contents (Approximate Quantity): Cable Size x Bolt Hole Size; 10mm² x Ø8mm (x6), 16mm² x 8mm (x6), 25mm² x 6mm (x5), 25mm² x 8mm (x5), 35mm² x 8mm (x5), 35mm² x 10mm (x5), 50mm² x 8mm (x5), 50mm² x 10mm (x5), 70mm² x 10mm (x5), 70mm² x 12mm (x5)

24V Medium-Duty Battery Terminals Model No. SEE BELOW

10-120mm2 Copper Lug Terminal Crimping Tool Model No. AK120B

Model No: BTP3 BTN4

Crimp Range:

Post Type: Positive Negative

Cable Size: 60mm 60mm

Pack Qty: 10 10

24V Battery Terminals Post with Washer & Wing Nut Model No. SEE BELOW Model No: BTP23 BTN24

Post Type: Positive Negative

Copper lug terminal tool. Crimp range 10-120mm². BS Standard type terminal. Made from SCM40 hard tool steel. 10-120mm²

24V Battery Terminals Post with Washer & Nut Model No. SEE BELOW Pack Qty: 5 5

Model No: BTP25 BTN26

Post Type: Positive Negative

Pack Qty: 5 5

Quick Release Positive-Negative Battery Clamps - Pair Model No. BTQK12 Cable Size: Positive Post Size: Negative Post Size:

For our full range of Battery Tools & Testers, see pages 488 to 492

25mm Ø19mm Ø17.5mm

1106 Cable Ties & Insulating Tape

Cable Ties - Black Model No. SEE BELOW Temperature range -40°C to +85°C. Model No: CT15036P100 CT20048P100 CT30048P100 CT35076P50 CT38048P100 CT45076P50 CT65012P50

Size: 150 x 3.6mm 200 x 4.8mm 300 x 4.8mm 350 x 7.6mm 380 x 4.8mm 450 x 7.6mm 650 x 12mm

Pack Qty: 100 100 100 50 100 50 50

Temperature range -40°C to +85°C. Size: 150 x 3.6mm 200 x 4.8mm 300 x 4.8mm 350 x 7.6mm 380 x 4.8mm 450 x 7.6mm 650 x 12mm

Temperature range -40°C to +85°C. Model No: CT20048P100B CT20048P100G CT20048P100R CT20048P100Y CT30048P100S CT38048P100S

Cable Ties - White Model No. SEE BELOW Model No: CT15036P100W CT20048P100W CT30048P100W CT35076P50W CT38048P100W CT45076P50W CT65012P50W

Cable Ties - Coloured Model No. SEE BELOW

Pack Qty: 100 100 100 50 100 50 50

Size: 200 x 4.8mm 200 x 4.8mm 200 x 4.8mm 200 x 4.8mm 300 x 4.8mm 380 x 4.8mm

Colour: Blue Green Red Yellow Silver Silver

Pk Qty: 100 100 100 100 100 100

19mm x 20m PVC Insulating Tape Packs of 10 Model No. SEE BELOW compliant. Length: Width: Thickness: Model No: ITBLU10 ITBLK10 ITRED10 ITYEL10 ITWHT10

20m 19mm 0.15mm Pack Qty: 10 10 10 10 10

Colour: Blue Black Red Yellow White

Cable Tie i 100 x 2.5mm - Pack off 200 Model No. CT200 Pack of approximately 200 cable ties. Size: Colours:

100 x 2.5mm Green, Red, Yellow, Blue (50 of each)

19mm x 20m PVC Insulating Tape Mixed Colours - Pack of 10 Model No. ITMIX10

Cable Ties - Black & White Assorted Packs Model No. SEE BELOW Temperature range -40°C to +85°C. Model No: CT600BW

Size: Colour: 100 x 2.5mm Black 150 x 3.6mm & 200 x 4.8mm White CT75B 100 x 2.5mm 150 x 3.6mm Black 200 x 4.8mm CT75W 100 x 2.5mm 150 x 3.6mm White 200 x 4.8mm Model No: Size: Colour: CT10025P200 100 x 2.5mm Black CT10025P200W 100 x 2.5mm White

Pack Qty: 600 (100 of each) 75 (25 of each) 75 (25 of each)

compliant.

Cable Tie Assortment - Pack of 375 Model No. CT375 Pack of approximately 375 cable ties. Five colours in each size. Sizes: Colours:

100 x 2.5, 150 x 3.6, 200 x 4.8mm Black, Green, Red, Yellow, White

Length: Width: Thickness: Colours: Pack Qty:

20m 19mm 0.15mm Black, Blue, Red, White, Yellow (2 of each) 10

This product cannot be used with Petrol, Diesel or Brake Fluid

Pack Qty: 200 200

5m Silicone Repair Tape Model No. SEE BELOW Silicone repair tape used for covering electrical repairs to help create a moisture barrier. Can also be used as a

Self-Adhesive Cable Tie Mounts - Packs of 100 Model No. SEE BELOW Cable Tie Fastening Tool Model No. AK3254 Used for tightening cable ties up to 2.5mm thick and up to 9.5mm wide. Spring loaded handle and spring loaded cutter. Jaw Height: Jaw Width:

2.5mm 9.5mm

Model No: CTM2020B CTM2525B CTM3030B CTM2020W CTM2525W CTM3030W

Size: 20 x 20mm 25 x 25mm 30 x 30mm 20 x 20mm 25 x 25mm 30 x 30mm

Colour: Black Black Black White White White

Max. Tie Width: 5mm 6mm 8mm 5mm 6mm 8mm

Tensile Strength: Electrical Insulation: Temperature Range: Model No: Colour: Clear Red Black

950psi 8000V -50°C to +260°C Width: Length: 25mm 5m 25mm 5m 25mm 5m

Tapes 1107

Double-Sided Adhesive Foam Tape Green Backing Model No. SEE BELOW

Double-Sided Adhesive Foam Tape Blue Backed Model No. SEE BELOW

Double-sided polyethylene closed cell foam tape with green backing. Ideal for bonding irregular surfaces.

tape with blue backing. Ideal for bonding smooth surfaces.

Model No: DSTG1210 DSTG1910 DSTG2510 DSTG5010

Model No: DSTB125 DSTB195 DSTB2510 DSTB505

Width: 12mm 19mm 25mm 50mm

Length: 10m 10m 10m 10m

Width: 12mm 19mm 25mm 50mm

Length: 5m 5m 10m 5m

19mm x 15m Fleece Tape Black Model No. FT01 Ideal for keeping wire bundles neat and tidy on vehicles or machinery in the workplace.

Pack of 2

95 x 25 x 1mm Double-Sided Number Plate Pad Pack of 6 Model No. DSTNPL Size:

95 x 25 x 1mm

Width: Length: Colour:

Duct Tape Model No. SEE BELOW

General purpose duct tape with a gloss

Reliably strong and adheres instantly.

with a very strong initial stick.

Width: Length: Model No:

50mm 50m Colour: White Red

48mm 50m Colour: Black Silver

50mm x 33m Hazard Warning Tape Model No. SEE BELOW

80mm x 100m Non-Adhesive Hazard Warning Barrier Tape Model No. SEE BELOW

Width: Length: Model No:

50mm 33m Colour: Black/Yellow Red/White

80mm 100m Colour: Black/Yellow Red/White

50mm x 18m Self-Adhesive Anti-Slip Tape Model No. SEE BELOW

12mm x 12m x 0.075mm PTFE Thread Sealing Tape - Pack of 10 Model No. PTFE1210 When applied on to a thread it forms an airtight seal. Width: Length: Thickness: Pack Quantity:

19mm 15m Black

Duct Tape Model No. SEE BELOW

12mm 12m 0.075mm 10

General Purpose Masking Tape Model No. SEE BELOW

grip where necessary.

Suitable for use up to 60Â°C. Model No:

Width: 24mm 48mm

Length: 50m 50m

Width: Length: Model No:

For our range of Adhesives & Sealants, see pages 1122 to 1123

50mm 18m Colour: Black Black/Yellow

1108 Rivets

Black Aluminium Rivets Model No. SEE BELOW

Aluminium Multi-Grip Rivets Model No. SEE BELOW Model No: RM3210S RM3210S5 RM3213S RM3213S5 RM4012S RM4012S5 RM4015S RM4015S5 RM4813S RM4813S5 RM4819S RM4819S5 RM4827S RM4813L RM4819L RM4827L

Flange Type: Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Large Large Large

Model No:

Size (Metric): Ø3.2 x 10mm Ø3.2 x 10mm Ø3.2 x 13mm Ø3.2 x 13mm Ø4 x 12mm Ø4 x 12mm Ø4 x 15mm Ø4 x 15mm Ø4.8 x 13mm Ø4.8 x 13mm Ø4.8 x 19mm Ø4.8 x 19mm Ø4.8 x 27mm Ø4.8 x 13mm Ø4.8 x 19mm Ø4.8 x 27mm

Size (Imperial): Ø1/8" x 3/8" Ø1/8" x 3/8" Ø1/8" x 1/2" Ø1/8" x 1/2" Ø5/32" x 7/16" Ø5/32" x 7/16" Ø5/32" x 9/16" Ø5/32" x 9/16" Ø3/16" x 1/2" Ø3/16" x 1/2" Ø3/16" x 3/4" Ø3/16" x 3/4" Ø3/16" x 1-1/16" Ø3/16" x 1/2" Ø3/16" x 3/4" Ø3/16" x 1-1/16"

Grip Range: 2.5-7mm 2.5-7mm 9-11mm 9-11mm 3.5-8.5mm 3.5-8.5mm 5.5-10.5mm 5.5-10.5mm 2-8mm 2-8mm 8-14mm 8-14mm 17-23mm 2-8mm 8-14mm 17-23mm

Pack Qty: 200 500 200 500 200 500 200 500 200 500 200 500 200 200 200 100

Steel Rivets - Standard Flange Model No. SEE BELOW Model No: RS4812 RS48615

Size (Metric): Ø4.8 x 12mm Ø4.8 x 16.5mm

Size (Imperial): Ø3/16" x 1/2" Ø3/16" x 5/8"

Grip Range: 6-8mm 11-13mm

Pack Qty: 200 200

Load Spreading Aluminium Rivets - Standard Flange Model No. SEE BELOW Model No: RB4823 RB4827

Size (Metric): Ø4.8 x 23mm Ø4.8 x 27mm

Size (Imperial): Ø3/16" x 7/8" Ø3/16" x 1-1/16"

Grip Range: 1-9mm 4-12mm

RAB3280S RAB4010S RAB4814S RAB3210L RAB4010L RAB4014L RAB4814L RAB4818L

Flange Type: Standard Standard Standard Large Large Large Large Large

Size (Metric): Ø3.2 x 8mm Ø4 x 10mm Ø4.8 x 14mm Ø3.2 x 10mm Ø4 x 10mm Ø4 x 14mm Ø4.8 x 14mm Ø4.8 x 18mm

Size (Imperial): Ø1/8" x 5/16" Ø5/32" x 3/8" Ø3/16" x 1/2" Ø1/8" x 3/8" Ø5/32" x 3/8" Ø5/32" x 1/2" Ø3/16" x 1/2" Ø3/16" x 3/4"

Grip Range: 3.5-5mm 5-6.5mm 8-10mm 5-7mm 5-6.5mm 8.5-10.5mm 8-10mm 12-14mm

Pack Qty: 200 200 200 200 200 200 200 200

Aluminium Peel Back Rivets - Standard Flange Model No. SEE BELOW Model No: RP4812 RP4819

Size (Metric): Ø4.8 x 12mm Ø4.8 x 19mm

Size (Imperial): Ø3/16" x 7/16" Ø3/16" x 3/4"

Grip Range: 2-6mm 8-12mm

Pack Qty: 200 200

Grip Range: 3-6mm 10-12mm 10-14mm

Pack Qty: 200 200 200

Grip Range: 2-9.5mm 2-16mm

Pack Qty: 100 100

Aluminium Blind Rivets - Standard Flange Model No. SEE BELOW Model No: RB6412S RB6418S RB6419S5

Size (Metric): Ø6.4 x 12mm Ø6.4 x 18mm Ø6.4 x 19.5mm

Size (Imperial): Ø1/4" x 7/16" Ø1/4" x 23/32" Ø1/4" x 3/4"

Zinc Plated Structural Steel Rivets Model No. SEE BELOW Pack Qty: 200 200

Model No: MB6323 MB6332

Size (Metric): Ø6.3 x 23mm Ø6.3 x 32mm

Size (Imperial): Ø1/4" x 7/8" Ø1/4" x 1-1/4"

Plastic Rivets Model No. SEE BELOW

500pc Aluminium Multi-Grip Rivet Assortment Model No. AB075MG

200pc Black Anodised Rivet Assortment Model No. AB074BR

Contents (Approximate Quantity): Standard Flange; Ø3.2 x 10mm (x60), 3.2 x 13mm (x60), 4.0 x 12mm (x35), 4.0 x 15mm (x30), 4.8 x 13mm (x25), 4.8 x 19mm (x20), Large Flange; Ø4.8 x 13mm (x50), Washer; M3 x 13mm (x220)

Contents (Approximate Quantity): Standard Flange; Ø3.2 x 8mm (x25), 4.0 x 10mm (x25), 4.8 x 14mm (x25); Large Flange; Ø3.2 x 10mm (x25), 4.0 x 10mm (x25), 4.0 x 14mm (x25), 4.8 x 14mm (x25), 4.8 x 18mm (x25)

Plastic rivets for Sealey Model No's AK499, RT001 and other makes of plastic rivet insertion tools. Model No: PR001 PR002 PR003 PR004

Size: Ø6.6 x 17.2mm Ø6.3 x 25.2mm Ø5 x 15.8mm Ø5 x 17.2mm

Pack Qty: 50 50 50 50

Rivet Nuts/Threaded Inserts 1109

Regular Threaded Inserts (Rivet Nut) Model No. SEE BELOW

Half Hex Threaded Inserts (Rivet Nut) Model No. SEE BELOW

Zinc plated steel threaded inserts. Model No: Thread Size: TIRM4 M4 x 0.7mm TIRM5 M5 x 0.8mm TIRM6 M6 x 1mm TIRM8 M8 x 1.25mm TIRM10 M10 x 1.5mm

Grip Range: 0.5-2mm 0.5-2mm 0.5-3mm 0.5-3.5mm 0.5-3.5mm

Full Hex Threaded Inserts (Rivet Nut) - Standard Flange Model No. SEE BELOW

Pack Qty: 50 50 50 50 50

Zinc plated steel threaded inserts.

Zinc plated steel threaded inserts. Model No: Thread Size: TIHHM4 M4 x 0.7mm TIHHM5 M5 x 0.8mm TIHHM6 M6 x 1mm TIHHM8 M8 x 1.25mm

Grip Range: 0.5-2.5mm 0.5-3mm 0.5-3.5mm 0.5-3.5mm

Pack Qty: 50 50 50 50

Model No: Thread Size: TIFHM4 M4 x 0.7mm TIFHM5 M5 x 0.8mm TIFHM6 M6 x 1mm TIFHM8 M8 x 1.25mm TIFHM10 M10 x 1.5mm

Grip Range: 0.5-2.5mm 0.5-3mm 0.5-3.5mm 0.5-3.5mm 0.5-3.5mm

Pack Qty: 50 50 50 50 50

Splined Threaded Inserts (Rivet Nut) Model No. SEE BELOW Zinc plated steel threaded inserts. Model No: Thread Size: TISM4 M4 x 0.7mm TISM5 M5 x 0.8mm TISM6 M6 x 1mm TISM8 M8 x 1.25mm

Grip Range: 0.5-2mm 0.5-2.5mm 0.5-3mm 0.5-3.5mm

Pack Qty: 50 50 50 50

10pc 1/8" Double End Drill Bit Set Model No. AK9910 High speed steel double end drill bits. 1/8" Size for pop riveting. Supplied in plastic tube. Contents:

1/8"(3.2mm) (x10)

18V 3Ah Lithium-ion Cordless Nut Riveter/Impact Driver Model No. CP315 Pulling Rods & Nuts Sizes: Drill Sizes: Nut Driver Sizes: Battery Type: Maximum Pulling Force: Replacement Battery: Weight:

200pc Splined Threaded Insert (Rivet Nut) Assortment M4-M8 - Metric Model No. AB073TI Contents (Approximate Quantity): M4 x 0.7 (x60), M5 x 0.8 (x40), M6 x 1 (x60), M8 x 1.25mm (x40)

M3, M4, M5, M6, M8, M10 6, 7, 8, 9, 11, 13mm 7, 8, 10, 13mm 18V 3Ah Li-ion 14000N CP315BP 1.5kg

Thread Repair Kits Model No. SEE BELOW Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Set includes drill bit, lengths of thread insert. Model No: TRM5 TRM6 TRM8 TRM9 TRM10 TRM12 TRM14

Thread Size: M5 x 0.8mm M6 x 1mm M8 x 1.25mm M9 x 1.25mm M10 x 1.5mm M12 x 1.75mm M14 x 1.25mm

Thread Lengths: 3.5, 5, 7mm (5 of each) 4, 6, 9mm (5 of each) 6, 9, 12mm (5 of each) 7, 14mm (3 of each), 11mm (x4) 7.5, 15mm (3 of each), 11mm (x4) 9, 18mm (2 of each), 14mm (x4) 10, 21mm (1 of each), 16mm (x3)

Replacement Thread Inserts: TRM5R TRM6R TRM8R TRM9R TRM10R TRM12R TRM14R

Thread Inserts Model No. SEE BELOW Replacement thread inserts. Model No: TRM5R TRM6R TRM8R TRM9R TRM10R TRM12R TRM14R

Thread Size: M5 x 0.8mm M6 x 1mm M8 x 1.25mm M9 x 1.25mm M10 x 1.5mm M12 x 1.75mm M14 x 1.25mm

For our full range of Hand Riveters, see pages 674 to 676

Thread Lengths: 3.5, 5, 7mm (5 of each) 4, 6, 9mm (5 of each) 6, 9 ,12mm (5 of each) 7, 14mm (3 of each), 11mm (x4) 7.5, 15mm (3 of each), 11mm (x4) 9, 18mm (2 of each), 14mm (x4) 10, 21mm (1 of each), 16mm (x3)

1110 Hose Clips

Zinc Plated HI-GRIP® Hose Clips Model No. SEE BELOW

Zinc Plated Hose Clips Model No. SEE BELOW

Hi-Grip® worm drive hose clips. Zinc plated with external pressed threads allowing for smooth surface hose contact. Manufactured in the UK to DIN 3017.

Worm Drive Hose Clips. Zinc plated with external pressed threads allowing for smooth surface hose contact. Manufactured to DIN 3017.

Model No: HCJ000 HCJM00 HCJ00 HCJ0 HCJ0X HCJ1A HCJ1 HCJ1X HCJ245 HCJ2A HCJ2 HCJ2X HCJ3 HCJ3X HCJ4 HCJ4X HCJ5 HCJ6 HCJ7

Model No: SHC000 SHCM00 SHC00 SHC0 SHC0X SHC1A SHC1 SHC1X SHC245 SHC2A SHC2 SHC2X SHC3 SHC3X SHC4 SHC4X SHC5 SHC6 SHC7

Size: Ø9.5-12mm Ø11-16mm Ø13-20mm Ø14-22mm Ø17-25mm Ø22-30mm Ø25-35mm Ø30-40mm Ø35-45mm Ø35-50mm Ø40-55mm Ø45-60mm Ø55-70mm Ø60-80mm Ø70-90mm Ø80-100mm Ø90-120mm Ø110-140mm Ø130-160mm

Band Width: 9.5mm 9.5mm 9.5mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm

Pack Qty: 30 30 30 30 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10

Hi-Grip® worm drive hose clips. Zinc plated with external pressed threads allowing smooth surface hose contact. Manufactured in the UK to DIN 3017. Size: Ø9.5-55mm Ø45-160mm

Band Width: 9mm 9mm 9mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm

Pack Qty: 30 30 30 30 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10

Zinc Plated Hose Clip Assortments Model No. SEE BELOW

Zinc Plated HI-GRIP® Hose Clip Assortments Model No. SEE BELOW Model No: HCJ85A HCJ26A

Size: Ø8-14mm Ø10-16mm Ø13-19mm Ø16-22mm Ø16-25mm Ø19-29mm Ø22-32mm Ø25-38mm Ø32-44mm Ø35-51mm Ø38-57mm Ø44-64mm Ø51-70mm Ø64-76mm Ø70-89mm Ø80-100mm Ø90-110mm Ø120-140mm Ø140-160mm

Band Width: 9.5/12mm 12mm

Pack Qty: 85 26

Worm Drive Hose Clips. Zinc plated with external pressed threads allowing for smooth surface hose contact. Manufactured to DIN 3017. Model No: SHCS1 SHCS3 SHCS2

Size: Ø8-29mm Ø8-57mm Ø44-160mm

Band Width: 9/12mm 9/12mm 12mm

Pack Qty: 30 85 26

81pc HI-GRIP® Hose Clip Assortment Model No. HCJ85AC

85pc Hose Clip Assortment Model No. SHC85AC

90pc Stainless Steel Hose Clip Assortment Model No. SHCSS90AC

Hi-Grip® worm drive hose clip. Zinc plated with external pressed threads. Manufactured in the UK to DIN 3017.

Assortment box of 85 zinc plated hose clips. Manufactured to DIN 3017.

Assortment box of 90 stainless steel hose clips. Manufactured with SS301A to DIN 3017.

Size: Band Width: Pack Qty: See page 1089 for detailed contents.

Ø9.5-55mm 9.5/12mm 81

Ø8-57mm 9/12mm 85

Ø10-57mm 9/12mm 90

Hose Clips & O-Clips 1111

Self-Build Hose Clip Sets Model No. SEE BELOW

Stainless Steel Hose Clips Model No. SEE BELOW

Sets include a length of banding and a selection of tension clips.

SS301A Grade stainless steel hose clips. Manufactured to DIN 3017. Model No: SHCSS000 SHCSS00 SHCSSM00 SHCSS0 SHCSS0X SHCSS1A SHCSS1 SHCSS1X SHCSSM SHCSS2A SHCSS2 SHCSS2X SHCSS3 SHCSS3X SHCSS4 SHCSS4X SHCSS5 SHCSS6 SHCSS7

Size: Ø10-16mm Ø12-22mm Ø13-19mm Ø16-27mm Ø22-32mm Ø25-38mm Ø32-44mm Ø35-51mm Ø38-57mm Ø44-64mm Ø51-70mm Ø55-64mm Ø64-76mm Ø70-89mm Ø80-100mm Ø90-110mm Ø110-130mm Ø130-150mm Ø150-170mm

Band Width: 9.7mm 9.7mm 9.7mm 9.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm 11.7mm

Pack Quantity: 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5

Mini Hose Clips Model No. SEE BELOW Zinc plated mini hose clips. Ideal for fuel pipes. Manufactured to DIN 3017. Model No: MHC79 MHC810 MHC911 MHC1012 MHC1113 MHC1214 MHC1315 MHC1416 MHC1517 MHC1618

Size: Ø7-9mm Ø8-10mm Ø9-11mm Ø10-12mm Ø11-13mm Ø12-14mm Ø13-15mm Ø14-16mm Ø15-17mm Ø16-18mm

Pack Qty: 30 30 30 30 30 30 30 20 20 20

Model No:

Band Length: 3m 3m

Band Width: 8mm 12.7mm

Worm Drive Tension Clips: 8pc 8pc

Single Ear O-Clips - Packs of 25 Model No. SEE BELOW SS301A Grade stainless steel single ear O-clips. Manufactured to DIN 1.4301. Model No: OCSE78 OCSE810 OCSE911 OCSE1113 OCSE1315 OCSE1517 OCSE1720 OCSE2022

Size: Ø7-8.5mm Ø8.5-10mm Ø9.8-11.8mm Ø11.8-13.8mm Ø13.2-15.7mm Ø15.3-18.5mm Ø17.8-21mm Ø20.2-22.8mm

Pack Quantity: 25 25 25 25 25 25 25 25

Double Ear O-Clips Packs of 25 Model No. SEE BELOW Zinc plated double ear O-clips. Manufactured to DIN 1.0338. Model No: OCDE79 OCDE911 OCDE1113 OCDE1315 OCDE1518 OCDE1720 OCDE2023

Size: Ø7-9mm Ø9-11mm Ø11-13mm Ø13-15mm Ø15-18mm Ø17-20mm Ø20-23mm

Pack Qty: 25 25 25 25 25 25 25

100pc Mini Hose Clip Assortment Model No. AB042MH

160pc Stainless Steel O-Clip Single Ear Assortment Model No. AB043SE

140pc O-Clip Double Ear Assortment Zinc Plated Model No. AB044DE

See page 1089 for detailed contents.

For our full range of Hose Clip Tools, see pages 516 to 517

1112 Tyre & Wheel Maintenance Wheel Weights Hammer-On Zinc for Steel Wheels Model No. SEE BELOW

Wheel Weights Hammer-On Plastic Coated Zinc - Alloy Wheels Model No. SEE BELOW

Zinc hammer-on wheel weights. Suitable for most European and Asian vehicles with steel rims. Manufactured to high quality to meet OEM standards.

Plastic coated zinc hammer-on wheel weights. Suitable for most European and Asian vehicles with alloy rims. Manufactured to high quality to meet OEM standards.

Model No: WWSH05 WWSH10 WWSH15 WWSH20 WWSH25 WWSH30 WWSH35 WWSH40 WWSH45 WWSH50

Model No: WWAH05 WWAH10 WWAH15 WWAH20 WWAH25 WWAH30 WWAH35 WWAH40 WWAH45 WWAH50

Weight: 5g 10g 15g 20g 25g 30g 35g 40g 45g 50g

Pack Qty: 100 100 100 100 100 100 50 50 50 50

Weight: 5g 10g 15g 20g 25g 30g 35g 40g 45g 50g

Pack Qty: 100 100 100 100 100 100 50 50 50 50

Adhesive Wheel Weights - Zinc Plated Steel Model No. SEE BELOW quality to meet OEM standards. Model No: WWSA5 WWSA510 WWSA5PC WWSA510PC WWSA5B WWSA510B

Type: Standard Standard Plastic Coated Plastic Coated Black Black

Weight: 5g 5/10g 5g 5/10g 5g 5/10g

Pack Qty: 100 x Strip of 12 100 x Strip of 8 (4 of each Weight) 100 x Strip of 12 100 x Strip of 8 (4 of each Weight) 50 x Strip of 12 50 x Strip of 8 (4 of each Weight)

Alloy Rim Tyre Valve Installer Model No. TST04 Pulls tyre valve assembly through rim. Shank is notched to accommodate various rim styles. Manufactured from resilient nylon to minimise damage and marking to alloy wheels. Features a valve core removal tool mounted in the base of the handle. Length:

270mm

Snap-in Tubeless Tyre Valves - Packs of 100 Model No. SEE BELOW Packs of 100 tubeless snap-in type tyre valves. Manufactured from EDPM rubber which prevents dry rot and wear. Model No: TV412 TV413 TV414 TV418

Rim Hole Size: 11.5mm (.453") 11.5mm (.453") 11.5mm (.453") 11.5mm (.453")

Length: 22mm 30mm 38mm 49mm

Exhaust Mounting Rubbers (Packs of 2) Model No. SEE BELOW Model No:

Dimensions (W x D x H): 70 x 45 x 37mm 60 x 41 x 20mm 62 x 54 x 13.5mm 59 x 59 x 13.5mm

Mounting Holes: Ø9mm, 18 x 10mm Oval Ø10.5mm 3.5mm High 180° Slots Ø30mm

Distance Between Mounts: 24mm 11mm -

CVJ Boots & Clamps 1113

Car Ball Joint Dust Covers Pack of 6 Assorted Model No. RJC01

Duraboot Stretch CVJ Boots Model No. SEE BELOW Model No: DBC100 DBC200 DBC300 DBC400 DBC500 DBC600 DBC700 DBC800

Joint Diameter: Ø80-104mm Ø73-95mm Ø86-112mm Ø80-104mm Ø70-91mm Ø76-99mm Ø74-96mm Ø60-78mm

Length: 90mm 106mm 119mm 112mm 84mm 92mm 99mm 104mm

Universal Stretch Boot Ø56-116mm Model No. CVB01 Joint Diameter: Shaft Diameter:

Ø56-116mm Ø19-30mm

Manufactured to DIN 1.4301 Model No:

Diameter: Ø19-40mm Ø50-110mm

instructions. Joint Diameter: Shaft Diameter:

commercial vehicle applications. Cover Size: Small: Medium: Large:

CVJ Boot Single Ear Clamps - Pack of 25 Model No. SEE BELOW Ø56-120mm Universal Split CVJ Boot Model No. CVS18

Multipurpose ball joint dust covers easily replace split or damaged dust covers on otherwise serviceable ball joints, avoiding MOT test failure. Pack contains six ball joint dust

Hole Sizes: Ø10mm/25mm Ø12mm/36.5mm Ø15mm/30mm

Commercial Vehicle Ball Joint Dust Covers - Pack of 3 Model No. RJC02 Multipurpose ball joint dust covers easily replace split or damaged dust covers on otherwise serviceable ball joints, avoiding MOT test failure. Pack contains three ball joint dust Covers a wide range of commercial vehicle applications.

Ø56-120mm Ø19-35mm

Hole Sizes:

Ø18mm/40.5mm

Universal Stretch CVJ Boots Model No. SEE BELOW

Universal CVJ Boot Clamp Kit Model No. BSL102

cutting guide. Suitable for 98% of vans and light commercial vehicles.

Kit includes 56m* high quality stainless steel banding with a tensile strength of 420N/mm². The dispenser case also houses 150* clamp sets and unique pliers with integrated cutters and band tensioner.

Universal Steering Rack Boot Kit Model No. SRBK200

Band Size: Band Length: Clamps/Buckles: *Approximate

Universal steering rack boot kit. Inner and outer ends feature trimable sections to facilitate a wide variety of applications. Supplied with plastic securing ties. Contains 2 steering rack boots.

Model No:

Joint Diameter: Ø80-120mm Ø56-116mm Ø56-116mm

Qty: 1 1 12

Shaft Diameter: Ø28-40mm Ø19-28mm Ø19-28mm

5.5 x 0.4mm 56m* 150pc*

For our full range of CVJ Tools, see page 518

1114 Brake Pipe/Bleed Screws

25ft Brake Pipe Seamless Tube Cupro-Nickel BS EN 12449 CW024A Model No. SEE BELOW

25ft Brake Pipe Copper Tubing Model No. SEE BELOW Model No: CBP001 CBP002

Gauge: 20 22

Pipe Size: Ø3/16" Ø3/16"

Model No: CNP316 CNP004 CNP005

Gauge: 22 22 22

Pipe Size: Ø3/16" Ø1/4" Ø5/16"

Brake Pipe Straightening Tool Model No. VS5056 Brake pipe straightener designed for use on automotive applications. This unique design is fast and easy to use. Suitable for 3/16" (4.76mm) cupro-nickel, copper and steel pipe. Features hole for marker pen.

Brake Bleed Screw - Metric Model No. BS10125

Brake Bleed Screw - Metric Model No. BS10130

Brake Bleed Screw - Metric Model No. BS7128

Brake Bleed Screw - Metric Model No. BS8125

Pipe Size: Length: Thread: Pack Quantity:

Ø3/16" 25mm M10 x 1mm 10

Ø3/16" 30mm M10 x 1mm 10

Ø3/16" 28mm M7 x 1mm 10

Ø3/16" 24mm M8 x 1.25mm 10

Brake Bleed Screw - Imperial Model No. BS1428

Brake Bleed Screw - Metric Model No. BS6129

Brake Bleed Screw - Imperial Model No. BS3824

Brake Bleed Screw - Imperial Model No. BS382438

Pipe Size: Length: Thread: Pack Quantity:

Ø3/16" 28mm 1/4"UNF x 28tpi 10

Ø3/16" 29mm M6 x 1mm 10

Copper Grease Lubricant Model No. SEE BELOW

Brake Parts Cleaner Model No. SEE BELOW Brake cleaner used to clean brakes and clutch parts without dismantling. Specially formulated for today's service engineers, automotive and DIY enthusiast.

Copper grease for high temperature applications, used on brakes, brake linkages and exhaust manifolds, studs & nuts. Specially formulated for today's service engineers, automotive and DIY enthusiast.

Model No: SCS011 SCS011S

Model No: SCS016 SCS016S

Size: 500ml 500ml

Ø3/16" 32mm 3/8"UNF x 24tpi 10

Pack Qty: 6 1

Size: 500ml 500ml

50ml Air & Brake Line Sealant Model No. SCS572 An instant seal at low pressure. Used for in diameter. 60 Hours to cure, which allows time to realign joints. Contains PTFE which seals against oils, gases and chemicals. Tear and shred resistant. Supplied in a concertina applicator.

Pack Qty: 6 1

500g Copper Grease Tin Model No. SCS109

In-Line Fuel Filters Model No. SEE BELOW Model No: Inlet/Outlet Diameter: Pack Quantity:

Ø3/16" 38mm 3/8"UNF x 24tpi 10

ILFS10 Ø7mm 10

ILFM10 Ø8mm 10

ILFL5 Ø8mm 5

ILDF5 Ø7mm 5

Anti-seize copper grease, protects against rust, oxidation and other corrosion. Size:

500g

Brake Pipe Connectors 1115

Long Female - Imperial Model No. BN3824LF

Short Female - Metric Model No. BN10100

Long Male - Imperial Model No. BN3824LM

Short Male - Metric Model No. BN10100SM

Pipe Size: Thread Size: Type: Flare Type: Pack Qty:

Pipe Size: Thread Size: Type: Flare type: Pack Qty:

Pipe Size: Thread Size: Type: Flare Type: Pack Qty:

Ø3/16" 3/8"UNF x 24tpi Long Female SAE 25

Long Male - Metric Model No. BN10100LM Pipe Size: Thread Size: Type: Flare Type: Pack Qty:

Ø3/16" M10 x 1mm Long Male DIN 25

Ø3/16" 3/8"UNF x 24tpi Long Male SAE 25

Full Thread Male - Metric Model No. BN10100FT

Long Male - Metric Model No. BN10125LM

Pipe Size: Thread Size: Type: Flare Type: Pack Qty:

Long Male - Imperial Model No. BN3820LM

Male - Imperial Model No. BN71620

Pipe Size: Thread Size: Type: Flare type: Pack Qty:

Pipe Size: Thread Size: Type: Flare Type: Pack Qty:

Ø3/16" 3/8"BSF x 20tpi Long Male SAE 25

Ø3/16" M10 x 1mm Short Female DIN 25

Ø3/16" M10 x 1mm Full Thread DIN 25

Short Male - Metric Model No. BN10125SM Ø3/16" M10 x 1.25mm Long Male DIN 25

Male - Metric Model No. BN121 Ø1/4" 7/16"UNF x 20tpi Male SAE 10

Ø3/16" M10 x 1mm Short Male DIN 25

Pipe Size: Thread Size: Type: Flare Type: Pack Qty:

Ø3/16" M10 x 1.25mm Short Male DIN 25

Part Thread Male - Metric Model No. BN12100PT

Pipe Size: Thread Size: Type: Flare Type: Pack Qty:

Ø1/4" M12 x 1mm Male DIN 10

Pipe Size: Thread Size: Type: Flare Type: Pack Qty:

Ø3/16" M12 x 1mm Male DIN 25

Short Male - Imperial Model No. BN3824SM

Male to Male - Imperial Model No. BN3824MC

Male to Male - Metric Model No. BC101MC

Female to Female - Imperial Model No. BC3824F

Pipe Size: Thread Size: Type: Pack Qty:

Ø3/16" 3/8"UNF x 24tpi Short Male 25

Ø3/16" 3/8"UNF x 24tpi Male to Male 10

Ø3/16" M10 x 1mm Male to Male 10

Female to Female - Metric Model No. BC10100F

Three-Way - Imperial Model No. BC38243WAY

Three-Way - Metric Model No. BC101003WAY

Pipe Size: Thread Size: Type: Pack Qty:

Ø3/16" M10 x 1mm Female to Female 10

Ø3/16" 3/8"UNF x 24tpi Three-Way 1

Ø3/16" M10 x 1mm Three-Way 1

For our full range of Brake Service Tools, see pages 535 to 550

Ø3/16" 3/8"UNF x 24tpi Female to Female 10

6pc Brake Service Spanner Set Model No. VS026 Hardened and tempered Chrome Vanadium steel. Fits popular sizes of brake pipes and nipples. See page 543 for full details.

1116 Speedfit® Pneumatic Couplings Speedfit® Pneumatic Couplings Bodies are produced in an acetal copolymer engineering plastic which is especially suitable for pneumatics and corrosion free applications. O-rings are nitrile rubber. Collets are produced in acetal copolymer with stainless steel teeth.

Brass SuperThread Straight Adaptors Model No. SEE BELOW

Straight Adaptors Model No. SEE BELOW Model No: JGC614 JGC814 JGC838 JGC1014

Pipe OD: Ø6mm Ø8mm Ø8mm Ø10mm

Thread: 1/4"BSP 1/4"BSP 3/8"BSP 1/4"BSP

Pack Qty: 5 5 5 5

Model No: JGBC618 JGBC818 JGBC814 JGBC1238

Straight Couplings Model No. SEE BELOW Model No: JGCS6 JGCS8 JGCS10 JGCS12

Pipe OD: Ø6mm Ø8mm Ø10mm Ø12mm

Pack Qty: 5 5 5 5

32pc Pneumatic Coupling Assortment - Ø6 & Ø8mm Metric Model No. AB069JG

Model No: JGCT6 JGCT8 JGCT10 JGCT12

Pipe OD: Ø6mm Ø8mm Ø10mm Ø12mm

Pipe OD: Ø6mm Ø8mm Ø8mm Ø12mm

Thread: 1/8" BSP 1/8" BSP 1/4" BSP 3/8" BSP

Pack Qty: 2 2 2 2

100m Polyethylene Tubing Black Model No. SEE BELOW

Mix of metric Ø6mm and Ø8mm elbows, straights, stem elbows and equal tees. Contents (Approximate Quantity): Ø6mm; Straight (x4), Elbow (x4), Equal Tee (x4), Stem Elbow (x4), Ø8mm; Straight (x4), Elbow (x4), Equal Tee (x4), Stem Elbow (x4)

Equal Tee Couplings Model No. SEE BELOW

® SuperThread pneumatic brass couplings, thread adaptor Metric pipe to Imperial thread couplings supplied in sizes 6, 8 and 12mm. Fittings incorporating the SuperThread can be used with BSP (parallel), BSPT (taper), NPTF, PF and PT metal thread forms. The special polyurethane seal feature means no sealant needs to be applied to make the joint airtight.

Pack Qty: 5 5 5 5

Linear low density polyethylene tubing is suitable for a wide range of temperatures and pressure, has a broad chemical compatibility and is made from non-contaminating materials. Only black tubing should be installed in areas exposed to ultraviolet light. Model No: PT6100 PT8100 PT10100 PT12100

Pipe OD: Ø6mm Ø8mm Ø10mm Ø12mm

Length: 100m 100m 100m 100m

20pc Pneumatic Coupling Assortment Ø10mm - Metric Model No. AB070JG Mix of metric Ø10mm elbows, straights, stem elbows, equal tees and thread adaptors.

Elbow Couplings Model No. SEE BELOW Model No: JGCE6 JGCE8 JGCE10 JGCE12

Pipe OD: Ø6mm Ø8mm Ø10mm Ø12mm

Pack Qty: 5 5 5 5

Stem Elbow Couplings Model No. SEE BELOW Model No: JGCET6 JGCET8 JGCET10 JGCET12

Pipe OD: Ø6mm Ø8mm Ø10mm Ø12mm

Pack Qty: 5 5 5 5

Contents (Approximate Quantity): Straight (x4), Elbow (x4), Equal Tee (x4), Stem Elbow (x4), Thread Adaptor 10mm x 1/4" (x4)

Contents (Approximate Quantity): Metric & Imperial Thread Adaptors; Ø6mm x 1/4" (x5), 8mm x 1/4" (x3), 8mm x 3/8" (x5), 10mm x 1/4" (x5), Brass SuperThread Adaptors; Ø6mm x 1/8" (x3), 8mm x 1/8" (x3), 8mm x 1/4" (x3), 12mm x 3/8" (x3)

50ml Air & Brake Line Sealant Model No. SCS572

15pc Pneumatic Coupling Assortment Ø12mm - Metric Model No. AB071JG Mix of metric Ø12mm elbows, straights, stem elbows and equal tees. Contents (Approximate Quantity): Elbow (x4), Equal Tee (x2), Stem Elbow (x4)

30pc Pneumatic Coupling Thread Adaptor Assortment - Metric & Imperial Model No. AB072JG

Straight (x5),

Instant seal at low pressure. Fine and course threads up to 3" in diameter. Contains PTFE which seals against oils, gases and chemicals.

Grease Fittings 1117

Straight Grease Nipples Packs of 25 Model No. SEE BELOW

45° Grease Nipples Packs of 25 Model No. SEE BELOW

90° Grease Nipples Packs of 25 Model No. SEE BELOW

Straight grease nipples with imperial/metric threads.

Angled grease nipples with imperial/metric threads.

Model No: GNI16 GNI17 GNI18 GNM18 GNM19 GNM20 GNM21

Model No: GNI10 GNI11 GNI12 GNM10 GNM11 GNM12 GNM13

Model No: GNI13 GNI14 GNI15 GNM14 GNM15 GNM16 GNM17

Thread Size: 1/4"BSP 1/4"UNF 1/8"BSP M10 x 1mm M6 x 1mm M8 x 1mm M8 x 1.25mm

Thread Type: Imperial Imperial Imperial Metric Metric Metric Metric

Pack Qty: 25 25 25 25 25 25 25

Thread Size: 1/4"UNF 1/8"BSP 1/4"BSP M10 x 1mm M8 x 1mm M8 x 1.25mm M6 x 1mm

Thread Type: Imperial Imperial Imperial Metric Metric Metric Metric

Pack Qty: 25 25 25 25 25 25 25

Thread Size: 1/4"BSP 1/4"UNF 1/8"BSP M10 x 1mm M6 x 1mm M8 x 1mm M8 x 1.25mm

Thread Type: Imperial Imperial Imperial Metric Metric Metric Metric

Pack Qty: 25 25 25 25 25 25 25

SINGLES OR PACKS OF 5

115pc Grease Nipple Assortment Model No. AB008GN Contents (Approximate Quantity): Straight; M6 x 1mm (x10), M8 x 1mm (x10), M8 x 1.25mm (x10), M10 x 1mm (x10), 45° Angle; M6 x 1mm (x10), M8 x 1mm (x5), M8 x 1.25 (x10), M10 x 1mm (x10), 90° Angle; M6 x 1mm (x10), M8 x 1mm (x10), M8 x 1.25mm (x10), M10 x 1mm (x10)

Flexible Rubber Delivery Hoses 1/8"BSP Model No. SEE BELOW Flexible rubber hoses for manual grease guns. Model No: GGH300 GGH450

Length: 300mm 450mm

Thread Size: 1/8"BSP 1/8"BSP

4-Jaw Heavy-Duty Hydraulic Connectors 1/8"BSP Model No. SEE BELOW

130pc Grease Nipple Assortment Model No. AB009GN Contents (Approximate Quantity): Straight Metric; M6 x 1mm (x10), M8 x 1mm (x10), M10 x 1mm (x10), Straight Imperial; 1/4"BSP (x10), 1/4"UNF (x10), 1/8"UNF (x10), 45° Angle Metric; M6 x 1mm (x10), M8 x 1mm (x10), M10 x 1mm (x10), 45° Angle Imperial; 1/4"UNF (x10), 1/4" BSP (x10), 1/8"BSP (x10), 90° Angle; M8 x 1.25mm (x10)

Flexible Rubber Grease Gun Delivery Hoses with 4-Jaw Connector Model No. SEE BELOW Flexible rubber hoses for manual grease guns. Supplied with 4-jaw grease gun end. Model No: GGHE300 GGHE450

Length: 300mm 450mm

Thread Size: 1/8"BSP 1/8"BSP

4-Jaw heavy-duty hydraulic connectors with 1/8"BSP thread. Model No: GGE1 GGE5

Thread Size: 1/8"BSP 1/8"BSP

Pack Quantity: 1 5

Flexible Rubber Delivery Hoses with 4-Jaw Connector & Quick Release Coupling Model No. SEE BELOW Flexible rubber snap-on extension with end hose. Supplied with 4-jaw grease gun end. Model No: GGSF300 GGSF450

Length: 300mm 450mm

Thread Size: 1/8"BSP 1/8"BSP

Needle Nose Grease Dispenser Model No. AK447 7pc Grease Gun Adaptor Kit Model No. AK4481

For use with all brands of manual grease gun (not for use

Kit consists of adaptors and extensions to make almost any lubricating job easy. For use with all brands of manual and air grease guns.

Long nozzle gives access to hard to reach areas. Ideal for lubricating constant velocity joints. Length:

170mm

For our full range of Bucket Greasers, see page 321

GREASE GUNS For our full range of Grease Guns see pages 318 to 320, or visit www.sealey.co.uk

1118 Grease

Lever Operated Screw Type Grease Gun Model No. AK52 Use with Model No. SCS107 screw type grease cartridges. Vacuum suction ensures full utilization of grease cartridge and eliminates priming issues. Manufactured using high grade die-cast steel and supplied with rigid extension tube and coupler.

400g EP2 Lithium Grease Cartridge Model No. SCS106 High quality EP2 lithium complex grease cartridge.

400g Screw Type EP2 Lithium Grease Cartridge Model No. SEE BELOW

Size:

10000psi 0.9cmÂł

400g

Screw type multipurpose EP2 lithium grease cartridges suitable for use with Sealey Grease Guns, Model No's AK4403, AK52 & AK53. Cartridge screws directly into grease gun head making it quicker and cleaner than standard cartridges. Size:

400g M33 x 2.5mm 1 12

Pistol Style Screw Type Grease Gun Model No. AK53

400g EP2 Lithium Grease Cartridge Model No. SEE BELOW EP2 Lithium grease cartridge, ideal for a wide range of applications.

Use with Model No. SCS107 screw type grease cartridges. Vacuum suction ensures full utilization of grease cartridge and eliminates priming issues. Manufactured using high tube and coupler.

1 12

100g Mini Grease Applicator Model No. AK51 Mini grease applicator supplied with 100g lithium grease cartridge. Ideal for use in hard-to-reach areas such as engine bays and door hinges. Supplied with accurate dispensing nozzle for precision greasing.

5000psi 0.7cmÂł

500g Clear Silicone Grease Tin Model No. SCS102

500g Red Rubber Grease Tin Model No. SCS110

waste drainage and insulation of electrical terminals.

Lubricating red rubber grease, ideal for use on brake assemblies.

Size:

500g

500g Bentone Grease Tin Model No. SCS104

500g Copper Grease Tin Model No. SCS109

500g Aluminium Anti-Seize Compound Tin Model No. SCS103

Anti-seize copper grease, protects against rust, oxidation and other corrosion.

Aluminium anti-seize compound, for use on all studs, nuts, bolts and other threaded connections.

Anti-seize bentone grease suitable for extreme heat applications including brakes and wheel bearings. Water resistant, compatible with ABS brakes and protects against scratches and corrosion.

Size:

500g

Aerosols 1119

500ml Copper Grease Lubricant Model No. SEE BELOW

500ml Brake Parts Cleaner Model No. SEE BELOW

500ml Throttle Body & Carburettor Cleaner Model No. SEE BELOW

Copper grease for high temperature applications, used on brakes, brake linkages and exhaust manifolds, studs & nuts. Specially formulated for today's service engineers, automotive and DIY enthusiast.

braking efficiency. Prevents dust escaping into the atmosphere. Quick drying and leaves no residue. Acetone free. Environmentally friendly formula.

Removes gum, resin and general deposits. For all types of carburettors, fuel injection systems and automatic chokes. Improves performance and economy. Will not damage catalytic converters or lambda sensors.

Model No: SCS016 SCS016S

Model No: SCS011 SCS011S

Model No: SCS013 SCS013S

Pack Quantity: 6 1

500ml Paint & Gasket Remover Model No. SEE BELOW

500ml Rubber Care Silicone-Free Lubricant Model No. SEE BELOW

Used to remove gaskets from engine components, water pumps and manifolds. Removes paints, lacquers and varnishes. Also removes rubber residue from wheel hubs

Maintains rubber seals on doors, tailgates and bonnets. Also

from engine components. Model No: SCS042 SCS042S

Pack Quantity: 6 1

and butane soldering irons. Model No: SCS035 SCS035S

500ml Spray Adhesive Model No. SEE BELOW

rubber parts ageing or cracking and stops screeching noises from dry rubber. Silicone-free formula.

Repairs and maintains most types of substrate and trim. Excellent for use on roof and trim lining, upholstery and backed carpet. Suitable for paper, card, fabric, foam and similar materials or onto metals and ceramics, glass and wood.

Model No: SCS043 SCS043S

Model No: SCS039 SCS039S

Pack Quantity: 6 1

500ml Battery Terminal Spray Model No. SEE BELOW

500ml Electrical Contact Cleaner Model No. SEE BELOW

200ml Butane Gas Charger Model No. SEE BELOW

Pack Quantity: 6 1

Removes carbon residues, dust, grease, oil and tar. Improves conductivity which helps prevent arcing and electrical breakdown. Ideal for ignition components and other precision parts. Quick drying formula. Leaves no residue.

for use on battery terminals, clips and connectors. Acid leak indicator, which turns red when acid is detected. Anti-corrosive.

Model No: SCS021 SCS021S

Model No: SCS015 SCS015S

Pack Quantity: 6 1

For all of our latest products and promotions visit www.sealey.co.uk

Pack Quantity: 6 1

1120 Aerosols

500ml Universal Maintenance Lubricant with Easy-Straw Head & PTFE Model No. SEE BELOW Easy-straw spray head allows you to change between conventional nozzle and extension tube. Protects all metals. Displaces moisture and contains a protective rust inhibitor. Cleans, lubricates and degreases target area. Silicone free Model No: SCS018 SCS018S

Pack Qty: 6 1

500ml Universal Maintenance Lubricant with PTFE Model No. SEE BELOW Universal maintenance spray. Protects all metals. Displaces moisture and contains a protective rust inhibitor. Cleans, lubricates and degreases target area. Silicone free formula suitable for bodyshop use. Model No: SCS010 SCS010S

Pack Qty: 6 1

500ml Clear Multipurpose Fine Oil Lubricant Model No. SEE BELOW

500ml Graphited Penetrating Oil Lubricant Model No. SEE BELOW

Suitable for wire rope, chains, cables, hinges, springs and slides. Cleans, lubricates and protects against rust. General application for all types of machinery. Higher grade general purpose lubricant, accurate and economical application.

Low viscosity high penetrating liquid. Frees seized nuts, bolts, locks and rusted parts. Lubricates and protects. Leaves a protective barrier. General application for all types of machinery. Higher grade general purpose lubricant, accurate and economical application.

Model No: SCS019 SCS019S

Model No: SCS022 SCS022S

Pack Qty 6 1

Pack Qty: 6 1

500ml Freeze Shock & Release Spray Lubricant Model No. SEE BELOW Aids release of corroded and seized parts. Fast shock freeze action penetrates the corroded area. Displaces moisture. Penetrates, lubricates and helps prevent future corrosion. Model No: SCS036 SCS036S

Pack Qty: 6 1

500ml Clear Chain & Cable Lubricant Model No. SEE BELOW Suitable for wire rope, chains, cables, hinges, springs and forklift masts. Penetrates and protects. Lubricates, leaving a protective barrier. Model No: SCS017 SCS017S

Pack Qty: 6 1

500ml Clear Grease Lubricant Model No. SEE BELOW

500ml White Grease Lubricant with PTFE Model No. SEE BELOW

500ml Silicone Clear Grease Lubricant Model No. SEE BELOW

linkages. Penetrates and protects. Lubricates, leaving a protective barrier. Silicone-free formula suitable for bodyshop use.

Suitable for locks, hinges and all moving applications. Penetrates and protects. Lubricates, leaving a protective barrier. Silicone-free formula suitable for bodyshop use.

linkages. Lubricates, leaving a protective barrier. Helps to prevent electrical breakdown by keeping moisture out.

Model No: SCS012 SCS012S

Model No: SCS014 SCS014S

Model No: SCS020 SCS020S

Pack Quantity: 6 1

Aerosols 1121

500ml Black, Silver & White Paint Model No. SEE BELOW Model No:

Pack Qty: 6 6 6 6 6

300ml Anti-Spatter Pressure Spray Model No. MIG/722308 Model No:

Pack Qty:

Colour:

Finish:

1 1 1

Black Black Silver

Matt Satin Metallic

500ml VHT Matt Black Paint Model No. SEE BELOW

500ml Grey, Red Oxide & Grey Zinc Primer Model No. SEE BELOW Model No:

Pack Qty: 6 6 6

Model No:

500ml Multipurpose Foam Cleaner Model No. SEE BELOW

Model No:

Pack Qty:

Colour:

Red Oxide

400ml Water Repellent Windscreen Cleaner Model No. SWSC400

150ml Air Conditioning Sanitizer Model No. SEE BELOW

Pack Qty: 6 1

Model No:

Pack Qty: 6 1

For our Masking Tape, see page 1107

Pack Qty: 6 1

1122 Adhesives & Sealants

50ml Low Strength Thread Lock Model No. SEE BELOW Prevents fasteners loosening due to vibration and seals against leakage. Allows easy disassembly of treated parts. Fills gaps up to 0.5mm. Model No: SCS222S SCS222 Fixture Time: Full Cure Time:

Pack Quantity: 1 12 15min @ 20°C 12hr @ 20°C

50ml Bearing Fit Retainer High Strength Model No. SEE BELOW Keeps full strength with no fatigue under load stress. Low corrosiveness. Model No: SCS601S SCS601

Pack Quantity: 1 12

50ml Medium Strength Nut Lock Model No. SEE BELOW

50ml High Strength Stud Lock Model No. SEE BELOW

Medium to high strength nut lock for all types of metal threaded fasteners. Can be used on plated parts up to 50mm.

stainless steel and zinc.

Model No: SCS243S SCS243 Fixture Time: Full Cure Time:

Model No: SCS271S SCS271 Fixture Time: Full Cure Time:

Pack Quantity: 1 12 5-8min @ 23°C 4hr @ 23°C on Steel 24hr @ 23°C on Zinc

Pack Quantity: 1 12 15-20min @ 23°C 24hr @ 23°C

50ml High Strength Retainer Model No. SEE BELOW

50ml Multi Gasket Sealant Orange Model No. SCS574 Immediate low resistance on assembly and cures once oil resistance with water and glycol tolerance. Size:

50ml Concertina Applicator

Model No: SCS638S SCS638

Pack Quantity: 1 12

300ml Black RTV Silicone Sealant Model No. SCS100

300ml Clear RTV Silicone Sealant Model No. SCS101

Formulated for automotive and industrial

150ml Exhaust Assembly Paste Model No. SCS200

and glass etc. Flow controllable power can. Temperature range: -50°C to +180°C.

glass etc. Temperature range: -50°C to +150°C.

Caulking Gun (see page 647).

Size:

200ml High Temperature Gasket Sealant Black Model No. SCS591

200ml Power Can

300ml Cartridge

For ease of assembly. Creates gas tight

Size:

150ml Cartridge

Adhesives & Sealants 1123

5g Fast Setting Super Glue Model No. SCS301 A low viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds. Size:

5g Bottle

20g Rapid Set Super Glue Model No. SEE BELOW

A low viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds.

A high viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds.

Non-drip thick gel adhesive that sets fast. For vertical repairs and porous materials. Bonds materials such as metal, rubber, plastics and wood.

Model No: SCS302S SCS302

Model No: SCS304S SCS304

Model No: SCS303S SCS303

Pack Qty: 1 20

10pc Adhesive & Sealant Kit Model No. SCSKIT1 50ml Air & Brake Line Sealant Model No. SCS572 60 hours to fully cure, allows time to realign joints. Contains PTFE. Size:

50ml Concertina Applicator

25ml Slow Set 20 Min Epoxy Adhesive Model No. SCS400 Workable for twenty minutes. Joins a huge array of materials, metals, most plastics, fibreglass, stone, ceramics and wood. Once cured, it can be machined, sanded and even painted. Size: Gap Fill: Temperature Range: Full Cure Time:

25ml Syringe Up To 2mm -50째C to +80째C 72hr Approx.

20g Non-Drip Gel Super Glue Model No. SEE BELOW

20g Fast Setting Super Glue Model No. SEE BELOW

Combination kit featuring the most popular adhesives and sealants, including thread, nut and stud lock, quick set metal and epoxy, super glues along with gasket and air/brake line sealants. Ideal for the workshop or mobile engineers and mechanics. Supplied in a tough carry-case. Contents: SCS222S, SCS243S, SCS601S, SCS271S, SCS302S, SCS303S, SCS380S, SCS401, SCS572, SCS574

25ml Quick Set 5 Min Epoxy Adhesive Model No. SCS401

Pack Qty: 1 20

200ml Super Glue Activating Aerosol - Pack of 6 Model No. SEE BELOW Radically reduces the time adhesives and super glues take materials that are ordinarily troublesome to glue. Model No: SCS300 SCS300S

Pack Qty: 6 1

25ml Quick Set Liquid Metal Model No. SCS380

114g Quick Set Putty Metal Model No. SCS390

glass etc. Creates an excellent waterproof and impact resistant bond.

For the bonding and repair of most metals. Great for forming and repairing metal housings and sheet steel. When fully cured

Hand-kneadable, non-rusting, steel reinforced epoxy putty. Steel stick repairs or rebuilds almost anything made of metal*.

Size: Temperature Range: Full Cure Time:

Size: Full Cure Time:

Size: Full Cure Time: *excluding aluminium

for bonding metal and metal alloys, most

25ml Syringe -40째C to +60째C 24hr Approx.

25ml Syringe 72hr Approx.

114g Tube 72hr Approx.

Important Information: Any product which carries a shelf life e.g. Glues & Sealants, will not be accepted for return unless incorrectly supplied by Jack Sealey Ltd.

1124 Fasteners & Fixings M4-M16 HT Setscrews DIN 933 Model No. SEE BELOW Not Illustrated Supplied in resealable Bag. Model No: SS410 SS416 SS420 SS425 SS512 SS516 SS520 SS525 SS530 SS540 SS550 SS612 SS616 SS620 SS625 SS630 SS635 SS640 SS650 SS660 SS675 SS816 SS820 SS825 SS830 SS835 SS840 SS850 SS860 SS870 SS875 SS8100 SS1020 SS1025 SS1030 SS1035 SS1040 SS1050 SS1060 SS1070 SS1075 SS1080 SS10100 SS1225 SS1235 SS1240 SS1250 SS1275 SS12100 SS1440 SS1450 SS1470 SS1480 SS14100 SS1650 SS1675 SS16100

Size: M4 x 10mm M4 x 16mm M4 x 20mm M4 x 25mm M5 x 12mm M5 x 16mm M5 x 20mm M5 x 25mm M5 x 30mm M5 x 40mm M5 x 50mm M6 x 12mm M6 x 16mm M6 x 20mm M6 x 25mm M6 x 30mm M6 x 35mm M6 x 40mm M6 x 50mm M6 x 60mm M6 x 75mm M8 x 16mm M8 x 20mm M8 x 25mm M8 x 30mm M8 x 35mm M8 x 40mm M8 x 50mm M8 x 60mm M8 x 70mm M8 x 75mm M8 x 100mm M10 x 20mm M10 x 25mm M10 x 30mm M10 x 35mm M10 x 40mm M10 x 50mm M10 x 60mm M10 x 70mm M10 x 75mm M10 x 80mm M10 x 100mm M12 x 25mm M12 x 35mm M12 x 40mm M12 x 50mm M12 x 75mm M12 x 100mm M14 x 40mm M14 x 50mm M14 x 70mm M14 x 80mm M14 x 100mm M16 x 50mm M16 x 75mm M16 x 100mm

Pack Quantity: 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 5

444pc M5 High Tensile Setscrew, Nut & Washer Assortment Model No. AB049SNW

408pc M6 High Tensile Setscrew, Nut & Washer Assortment Model No. AB050SNW

220pc M8 High Tensile Setscrew, Nut & Washer Assortment Model No. AB051SNW

150pc M10 High Tensile Setscrew, Nut & Washer Assortment Model No. AB052SNW

Contents (Approximate Quantity): Setscrews; Diameter x Length; M8 x 25 (x20), M8 x 40 (x10), M8 x 50 (x10), M8 x 75mm (x10), Nuts; M8 Steel (x50), Washers; M8 Flat Washer Form A (x120)

Contents (Approximate Quantity): Setscrews; Diameter x Length; M10 x 25 (x10), M10 x 35 (x10), M10 x 50 (x10), M10 x 75mm (x10), Nuts; M10 Steel (x40), Washers; M10 Flat Washer Form A (x70)

150pc M5-M10 High Tensile Setscrew Assortment DIN 933 Model No. AB048SS

320pc 1/4"-1/2"UNF Steel Nut Assortment DIN 934 Model No. AB029SN

Contents (Approximate Quantity): Diameter x Length; M5 x 25 (x40), M6 x 25 (x40), M8 x 25 (x28), M8 x 40 (x20), M10 x 25 (x8), M10 x 40mm (x14)

Contents (Approximate Quantity): 5/16" (x120) , 3/8" (x50), 1/2" (x30)

1/4" (x120),

M6-M12 High Tensile Setscrew & Nut Assortments Model No. SEE BELOW Supplied in resealable bag.

M6-M24 x 1m Threaded Rods DIN 975 Model No. SEE BELOW Model No: STUD6 STUD8 STUD10 STUD12

Size: Pk Qty: M6 x 1m 5 M8 x 1m 5 M10 x 1m 5 M12 x 1m 5

Model No: STUD14 STUD16 STUD20 STUD24

Size Pk Qty: M14 x 1m 5 M16 x 1m 5 M20 x 1m 2 M24 x 1m 2

144pc 1/4"-3/8"UNF Setscrew Assortment BS 1768 Model No. AB047UNF Contents (Approximate Quantity): Diameter x Length; 1/4" x 1-1/2" (x50), 1/4" x 1" (x50), 5/16" x 1" (x20), 5/16" x 1-1/2" (x8), 3/8" x 1" (x8), 3/8" x 1-1/2" (x8)

Model No: Contents (Approximate Quantity): HSSM6 Setscrews; Diameter x Length, M6 x 20 (x40), M6 x 30 (x30), M6 x 50mm (x28), Nuts; M6 Steel (x100) HSSM8 Setscrews; Diameter x Length, M8 x 20 (x44), M8 x 30 (x28), M8 x 50mm (x28), Nuts; M8 Steel (x100) HSSM10 Setscrews; Diameter x Length, M10 x 20 (x40), M10 x 30 (x32), M10 x 50mm (x28), Nuts; M10 Steel (x100) HSSM12 Setscrews; Diameter x Length, M12 x 25 (x30), M10 x 35 (x10), M10 x 50mm (x10), Nuts; M12 Steel (x50)

Fasteners & Fixings 1125

Steel Nuts DIN 934 M3-M24 Model No. SEE BELOW Supplied in resealable bag. Model No: SN3 SN4 SN5 SN6 SN8 SN10 SN12 SN14 SN16 SN20 SN24

Size: M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 M24

Pitch: 0.5mm 0.7mm 0.8mm 1mm 1.25mm 1.5mm 1.75mm 2mm 2mm 2.5mm 3mm

Pack Qty: 100 100 100 100 100 100 25 25 25 10 5

370pc Steel Nut Assortment DIN 934 M5-M10 Model No. AB028SN Contents (Approximate Quantity): M6 (x100), M8 (x80), M10 (x40)

Zinc Plated Nylon Lock Nuts DIN 982 M4-M1 6 Model No. SEE BELOW Supplied in resealable bag. Model No: NLN4 NLN5 NLN6 NLN8 NLN10 NLN12 NLN14 NLN16

Size: M4 M5 M6 M8 M10 M12 M14 M16

Pitch: 0.7mm 0.8mm 1mm 1.25mm 1.5mm 1.75mm 2mm 2mm

Pack Qty: 100 100 100 100 100 25 25 25

Contents (Approximate Quantity): M6 x 1 (x130), M8 x 1.25 (x100), M10 x 1.5 (x50), M12 x 1.75mm (x20)

255pc Steel Nut Assortment DIN 934 M4-M16 Model No. AB046SN

255pc Nylon Lock Nut Assortment DIN 985 M4-M16 Model No. AB033LN

Contents (Approximate Quantity): M4 x 0.7 (x50), M5 x 0.8 (x50), M6 x 1 (x40), M8 x 1.25 (x35), M10 x 1.5 (x30), M12 x 1.75 (x20), M14 x 2 (x15), M16 x 2mm (x15)

Zinc Plated Coach Bolt & Nuts DIN 603 M6-M10 Model No. SEE BELOW

Zinc Plated Serrated Flange Setscrews DIN 6921 M6-M8 Model No. SEE BELOW

Supplied in resealable bag. Model No: CBN640 CBN675 CBN840 CBN875 CBN1040 CBN1075

Size: M6 x 40mm M6 x 75mm M8 x 40mm M8 x 75mm M10 x 40mm M10 x 75mm

Supplied in resealable bag. Model No: FN5 FN6 FN8 FN10 FN12

Size: M5 M6 M8 M10 M12

Pitch: 0.8mm 1mm 1.25mm 1.5mm 1.75mm

Pack Qty: 100 100 100 100 50

390pc Serrated Flange Nut Assortment DIN 6923 M5-M12 Model No. AB031FN

300pc Nylon Lock Nut Assortment DIN 982 M6-M12 Model No. AB032LN M5 (x150),

Zinc Plated Serrated Flange Nuts DIN 6923 M5-M12 Model No. SEE BELOW

Contents (Approximate Quantity): M5 x 0.8 (x120), M6 x 1 (x120), M8 x 1.25 (x120), M10 x 1.5 (x20), M12 x 1.75mm (x10)

1000pc Internal Serrated Lock Washer Assortment DIN 6798J M5-M10 Model No. AB057LW Contents (Approximate Quantity): M6 (x300), M8 (x200), M10 (x100)

M5 (x400),

Supplied in resealable bag. Pitch: 1mm 1mm 1.25mm 1.25mm 1.5mm 1.5mm

Pack Qty: 100 100 50 50 50 50

Model No: SFS620 SFS625 SFS630 SFS820 SFS825 SFS830

Size: M6 x 20mm M6 x 25mm M6 x 30mm M8 x 20mm M8 x 25mm M8 x 30mm

Pitch: 1mm 1mm 1mm 1.25mm 1.25mm 1.25mm

Pack Qty: 50 50 50 50 50 50

250pc Grub Screw Assortment DIN 916 M4-M10 Model No. AB045GS Contents (Approximate Quantity): M4 x 8, M5 x 5, M5 x 10, M6 x 6, M6 x 8, M6 x 10, M8 x 8, M8 x 10, M8 x 12, M10 x 10mm (25 of each)

For our full range of Socket Sets, see pages 31 to 56

1126 Fasteners & Fixings

Form A Flat Washers DIN 125 - M4-M20 Model No. SEE BELOW

Form A Flat Washers BS 4320 - M5-M24 Model No. SEE BELOW

Manufactured to DIN 125. Supplied in resealable bag.

Manufactured to BS 4320. Supplied in resealable bag.

Model No: FWA49 FWA510 FWA612 FWA817 FWA1021 FWA1224 FWA1428 FWA1630 FWA2037

Model No: FWC512 FWC614 FWC821 FWC1024 FWC1228 FWC1430 FWC1634 FWC2039 FWC2450

Size: M4 x 9mm M5 x 10mm M6 x 12mm M8 x 17mm M10 x 21mm M12 x 24mm M14 x 28mm M16 x 30mm M20 x 37mm

Pack Qty: 100 100 100 100 100 100 50 50 50

Size: M5 x 12.5mm M6 x 14mm M8 x 21mm M10 x 24mm M12 x 28mm M14 x 30mm M16 x 34mm M20 x 39mm M24 x 50mm

Pack Qty: 100 100 100 100 100 50 50 50 25

Zinc Plated Repair Washers Model No. SEE BELOW Supplied in resealable bag. Model No: RW519 RW525 RW619 RW625 RW638 RW825 RW838 RW850 RW1030 RW1038 RW1050

Size (Metric): M5 x 19mm M5 x 25mm M6 x 19mm M6 x 25mm M6 x 38mm M8 x 25mm M8 x 38mm M8 x 50mm M10 x 30mm M10 x 38mm M10 x 50mm

Size (Imp): Pack Qty: 3/16" x 3/4" 100 3/16" x 1" 100 1/4" x 3/4" 100 1/4" x 1" 100 1/4" x 1-1/2" 50 5/16" x 1" 100 5/16" x 1-1/2" 50 5/16" x 2" 50 3/8" x 1-1/4" 50 3/8" x 1-1/2" 50 3/8" x 2" 50

1070pc Flat Washer Assortment Form A DIN 125 - M5-M16 Model No. AB055WA

495pc Flat Washer Assortment Form C BS 4320 - M6-M24 Model No. AB056WC

240pc Zinc Plated Repair Washer Assortment - M5-M10 Model No. AB059RW

Contents (Approximate Quantity): M5 x 10 (x300), M6 x 12 (x300), M8 x 17 (x300), M10 x 21 (x100), M12 x 24 (x50), M14 x 28 (x10), M16 x 30mm (x10)

Contents (Approximate Quantity): M6 x 14 (x170), M8 x 21 (x170), M10 x 24 (x100), M12 x 28 (x30), M14 x 30 (x10), M16 x 34 (x5), M20 x 39 (x5), M24 x 50mm (x5)

Contents (Approximate Quantity): M5 x 19 (x60), M5 x 25 (x10), M6 x 19 (x60), M6 x 25 (x35), M6 x 38 (x10), M8 x 25 (x35), M8 x 38 (x10), M10 x 30 (x10), M10 x 38mm (x10)

Split Pins Model No. SEE BELOW Split pins, zinc plated steel. Supplied in resealable bag.

Zinc Plated Spring Washers DIN 127B - M5-M16 Model No. SEE BELOW

3/16"-1/2" Imperial Flat Washers - 'Table 3' Model No. SEE BELOW

Manufactured to DIN 127B. Supplied in resealable bag.

Manufactured to BS 3410. Supplied in resealable bag.

Model No: SWM5 SWM6 SWM8 SWM10 SWM12 SWM14 SWM16

Model No: FWI106 FWI105 FWI100 FWI101 FWI102 FWI103

Size: M5 M6 M8 M10 M12 M14 M16

Pack Qty: 100 100 100 50 50 50 50

1010pc Spring Washer Assortment DIN 127B - M6-M16 Model No. AB058SW Contents (Approximate Quantity): M6 (x400), M8 (x400), M10 (x180), M12 (x10), M14 (x10), M16 (x10)

Size: 3/16" x 7/16" 1/4" x 9/16" 5/16" x 5/8" 3/8" x 3/4" 7/16" x 7/8" 1/2" x 1"

Pack Qty: 100 100 100 100 50 50

Model No: SPI100 SPI101 SPI102 SPI103 SPI104 SPI105 SPI106 SPI107 SPI108 SPI109

Size (Metric): 1.6 x 25mm 2 x 25mm 2.4 x 25mm 2.4 x 38mm 2.8 x 38mm 3.2 x 38mm 3.6 x 38mm 4 x 41mm 4 x 51mm 4.8 x 51mm

Size (Imp): Pack Qty: 1/16" x 1" 100 5/64" x 1" 100 3/32" x 1" 100 3/32" x 1-1/2" 100 7/64" x 1-1/2" 100 1/8" x 1-1/2" 100 9/64" x 1-1/2" 100 5/32" x 1-5/8" 100 5/32" x 2" 100 3/16" x 2" 100

555pc Split Pin Assortment - Small Sizes Model No. AB001SP

230pc Split Pin Assortment - Large Sizes Model No. AB003SP

Contents (Approximate Quantity): 1/16" x 1" (1.6 x 25.4mm) (x150), 3/32" x 1" (2.4 x 25.4mm) (x150), 3/32" x 1-1/2" (2.4 x 38mm) (x100), 1/8" x 1-1/4" (3.2 x 32mm) (x75), 1/8" x 2"(3.2 x 51mm) (x50), 5/32" x 2-1/2" (4 x 63mm) (x30)

Contents (Approximate Quantity): 3/32" x 1-1/12" (2.4 x 38mm) (x100), 5/32" x 2" (4 x 51mm) (x70), 3/16" x 2" (4.8 x 51mm) (x25), 1/4" x 3" (6.3 x 76mm) (x15), 19/64" x 4" (7.5 x 102mm) (x20)

Fasteners & Fixings 1127

Countersunk Pozi Self Tapping Screws DIN 7982 Model No. SEE BELOW

Zinc Plated Self Drilling Pan Head Phillips Screws DIN 7504N Model No. SEE BELOW

Supplied in resealable bag. Model No: ST3516 ST3525 ST4219 ST4225 ST4238 ST4838 ST6338 ST6344 ST6351

Size: 3.5 x 16mm 3.5 x 25mm 4.2 x 19mm 4.2 x 25mm 4.2 x 38mm 4.8 x 38mm 6.3 x 38mm 6.3 x 44mm 6.3 x 51mm

Pack Qty: 100 100 100 100 100 100 100 100 100

Zinc Plated Acme Screws with Captive Washer BS 7976/6903/B M8-M14 Model No. SEE BELOW

Supplied in resealable bag. Model No: SDPH4213 SDPH4219 SDPH4819 SDPH4825

Size: 4.2 x 13mm 4.2 x 19mm 4.8 x 19mm 4.8 x 25mm

Pack Qty: 100 100 100 100

Supplied in resealable bag. Model No: ASW812 ASW8 ASW101 ASW10 ASW12 ASW121 ASW14 ASW141

Size: M8 x 1/2" M8 x 3/4" M10 x 1/2" M10 x 3/4" M12 x 3/4" M12 x 1/2" M14 x 3/4" M14 x 1/2"

Pack Qty: 50 100 100 100 100 50 100 100

500pc Self Drilling Phillips Pan Head Screw Assortment DIN 7504N Model No. AB060SDS 600pc Zinc Plated Self Tapping Countersunk Pozi Screw Assortment DIN 7982 Model No. AB065STCP

Contents (Approximate Quantity): Diameter x Length; 3.5 x 13 (x100), 3.5 x 19 (x100), 3.5 x 25 (x100), 4.2 x 13 (x100), 4.2 x 19 (x40), 4.2 x 25 (x30), 4.8 x 19mm (x30)

Pozi Pan Head Self Tapping Screws DIN 7981CZ Model No. SEE BELOW

Pozi Machine Screws Pan Head DIN 7985Z Model No. SEE BELOW Supplied in resealable bag. Model No: MSP520 MSP525 MSP620 MSP625

Size: M5 x 20mm M5 x 25mm M6 x 20mm M6 x 25mm

Pack Qty: 100 50 50 50

Model No: STPP3513 STPP3519 STPP4213 STPP4219 STPP4225 STPP4813 STPP4819 STPP4825 STPP4838 STPP5519 STPP5525 STPP5538 STPP6325 STPP6338

Size: 3.5 x 13mm 3.5 x 19mm 4.2 x 13mm 4.2 x 19mm 4.2 x 25mm 4.8 x 13mm 4.8 x 19mm 4.8 x 25mm 4.8 x 38mm 5.5 x 19mm 5.5 x 25mm 5.5 x 38mm 6.3 x 25mm 6.3 x 38mm

Pack Qty: 100 100 100 100 100 100 100 100 100 100 100 100 100 100

510pc Zinc Plated Self Tapping Countersunk Pozi Screw Assortment DIN 7982 Model No. AB062STCS Contents (Approximate Quantity): Diameter x Length; 3.5 x 16 (x140), 3.5 x 25 (x140), 4.2 x 19 (x130), 4.2 x 25 (x50), 4.2 x 38 (x20), 4.8 x 38mm (x30)

264pc Machine Screw Assortment M5-M8 Countersunk & Pan Head Pozi Model No. AB054MS

305pc Self Tapping Pan Head Pozi Screw Assortment DIN 7981CZ Model No. AB064STPP

700pc Self Tapping Pan Head Pozi Screw Assortment DIN 7981CZ Model No. AB063STPH

Contents (Approximate Quantity): Diameter x Length; Pan Head; M5 x 20 (x60), M5 x 25 (x60), M6 x 20 (x50), M6 x 25mm (x50), Countersunk; M8 x 20 (x24), M8 x 25mm (x20)

Contents (Approximate Quantity): Diameter x Length; 4.8 x 13 (x80), 4.8 x 19 (x80), 4.8 x 25 (x30), 4.8 x 38 (x25), 5.5 x 19 (x30), 5.5 x 25 (x25), 5.5 x 38 (x15), 6.3 x 25 (x10), 6.3 x 38mm (x10)

For our full range of Screwdrivers, see pages 90 to 103

1128 Fasteners & Fixings

Zinc Plated Self Drilling Hex Head Screws DIN 7504K Model No. SEE BELOW Supplied in resealable bags. Model No: SDHX4213 SDHX4219 SDHX4225 SDHX4813 SDHX4819 SDHX4825 SDHX5525 SDHX5538 SDHX5550 SDHX6325 SDHX6338 SDHX6350

Size: 4.2 x 13mm 4.2 x 19mm 4.2 x 25mm 4.8 x 13mm 4.8 x 19mm 4.8 x 25mm 5.5 x 25mm 5.5 x 38mm 5.5 x 50mm 6.3 x 25mm 6.3 x 38mm 6.3 x 50mm

Zinc Plated Acme Screws Washer Faced BS 6982C Model No. SEE BELOW

Black Pozi Self Tapping Screws Flanged Head BS 4174 Model No. SEE BELOW

Pack Qty: 100 100 100 100 100 100 100 100 100 100 100 100

Supplied in resealable bags.

Supplied in resealable bags. Model No: BST3510 BST3513 BST3519 BST4213 BST4216 BST4219 BST4225 BST4813 BST4816 BST4819 BST4825

Size: 3.5 x 10mm 3.5 x 13mm 3.5 x 19mm 4.2 x 13mm 4.2 x 16mm 4.2 x 19mm 4.2 x 25mm 4.8 x 13mm 4.8 x 16mm 4.8 x 19mm 4.8 x 25mm

Pack Qty: 100 100 100 100 100 100 100 100 100 100 100

Model No: ASF103 ASF123

Size: M10 x 3/4" M12 x 3/4"

Pack Qty: 50 50

108pc Metric Socket Screw Button Head Assortment High Tensile M5-M10 DIN 912 Model No. AB053BH Contents (Approximate Quantity): Diameter x Length; M5 x 12 (x30), M5 x 16 (x30), M6 x 16 (x10), M8 x 10 (x12), M8 x 20 (x8), M8 x 25 (x8), M10 x 40mm (x10)

410pc Self Drilling Hexagon Head Screw Assortment DIN 7504K Model No. AB061SDH

700pc Self Tapping Flanged Head Screw Assortment BS 4174 Model No. AB066STBK

Contents (Approximate Quantity): Diameter x Length; 4.2 x 19 (x70), 4.2 x 25 (x80), 4.8 x 13 (x70), 4.8 x 19 (x60), 4.8 x 25 (x60), 5.5 x 25 (x10), 5.5 x 38 (x10), 5.5 x 51 (x10), 6.3 x 25 (x10), 6.3 x 38 (x10), 6.3 x 50mm (x20)

Contents (Approximate Quantity): Diameter x Length; 3.5 x 10 (x160), 3.5 x 19 (x160), 4.2 x 13 (x160), 4.2 x 19 (x60), 4.2 x 25 (x30), 4.8 x 13 (x30), 4.8 x 16 (x30), 4.8 x 19 (x30), 4.8 x 25mm (x40)

Machine Screws Pan Head Slot DIN 85 Model No. SEE BELOW Supplied in resealable bag. Model No: MSS420 MSS440 MSS525 MSS550

Size: M4 x 20mm M4 x 40mm M5 x 25mm M5 x 50mm

Pack Qty: 50 50 50 50

Pozi Machine Screws Countersunk Pozi DIN 965Z Model No. SEE BELOW

200pc Number Plate Screw Assortment Plastic Enclosed Head Model No. AB076NP

Supplied in resealable bag. Model No: MSC820 MSC825

Size: M8 x 20mm M8 x 25mm

Pack Qty: 50 50

Colours: Size: Quantity:

Blue, Black, White, Yellow 4.8 x 18mm 200

Number Plate Screws Model No. SEE BELOW Number plate screws with injection moulded plastic enclosed heads.

Number Plate Screws & Flip Cap 4.2 x 19mm Model No. SEE BELOW Model No:

Size: 4.2 x 19mm 4.2 x 19mm 4.2 x 19mm 4.2 x 19mm

Colour: White Yellow Black Blue

Model No:

Pack Qty: 50 50 50 50

Size: 4.8 x 18mm 4.8 x 24mm 4.8 x 18mm 4.8 x 24mm 4.8 x 18mm 4.8 x 24mm 4.8 x 18mm 4.8 x 24mm

Colour: White White Yellow Yellow Black Black Blue Blue

Pack Qty: 50 50 50 50 50 50 50 50

Combination Kits 1129 Combination Kits Model No. SEE BELOW Each kit is supplied with a 24 bin wall mounted storage system. The bins are manufactured from shockproof polymer which is resistant to mild acids, solvents and oils. They also have a high thermal stability and resist damage from extremes of temperature. Heavy-duty steel back panel and labelling tags supplied.

Automotive Workshop Fixings Combination Kit Model No. COMBOAWF Combination of 29 packs of the most popular sized nuts, bolts, washers and split pins for the general automotive workshop.

Bodyshop & Refinishing Combination Kit Model No. COMBOBAR Combination of 24 packs of the most popular sized rivets, threaded inserts, cable ties and screws used in the automotive bodyshop.

Contents: FWC614, FWC821, FWC1024, NLN6, NLN8, NLN10, RW625, RW825, RW1030, SN6, SN8, SN10, SPI100, SPI107, SPI109, SS630, SS650, SS675, SS825, SS850, SS875, SS1030, SS1050, TPS131

Contents: ASW14, ASW101, ASW121, BST3513, BST4219, BST4816, CT20048P100, CT38048P100, PTNP5, PTNP6, PTNP7, RAB3210L, RAB4010L, RAB4010S, RAB4814L, RB4827, RB6419S5, RM4813S, RM4819S, RP4819, RW519, RW825, TIFHM6, TIFHM8, TPS131

Automotive Blade Fuse Combination Kit Model No. COMBOABF

Electrical Terminal Combination Kit Model No. COMBOETK

Combination of 24 packs of the most popular automotive mini, standard and maxi blade fuses. Contents: MBF250, MBF350, MBF450, MBF550, MBF1050, MBF1550, MBF2050, MBF2550, MBF3050, MBF7550, MF2010, MF3010, MF4010, MF5010, SBF350, SBF550, MF6010, MF7010, MF8010, SBF1050, SBF1550, SBF2050, SBF3050, SBF7550, TPS131

Combination of 24 packs of the most popular electrical terminals. Contents: BT11, BT12, BT16, BT17, BT21, BT22, BT26, BTSB50, BTSSB25, RT11, RT16, RT17, RT22, RT23, RT26, RT29, RTSB50, RTSSB25, YT10, YT20, YT21, YT22, YTSB50, YTSSB25, TPS131 Model No. TPS131 supplied with items

Model No. TPS132 supplied with item

Grease Servicing Combination Kit Model No. COMBOGSK Combination of 24 packs of the most popular sized grease nipples, hoses and connectors for agricultural vehicles and machinery. Contents: GGE5, GGHE300, GGSF300, GNI10, GNI11, GNI12, GNI13, GNI14, GNI15, GNI16, GNI17, GNI18, GNM10, GNM11, GNM12, GNM13, GNM14, GNM15, GNM16, GNM17, GNM18, GNM19, GNM20, GNM21, TPS132

For our full range of Storage Bins, see pages 878 to 882

1130 Air Line Couplings PCL Vertex Couplings Model No. SEE BELOW

Coupling Bodies - Female Model No. SEE BELOW

Coupling Bodies - Male Model No. SEE BELOW Model No: AC16 ACP16 AC16BP AC72 AC73

Type:

PCL Safeflow Couplings Model No. SEE BELOW

Thread Size:

Pack Qty:

Model No: AC15 ACP15 AC15BP AC74 AC75

Type:

Thread Size:

Pack Qty:

Type:

Twin Coupling Bodies Y-Adaptor Model No. SEE BELOW

Type:

Hose Size:

Type: Pack Qty:

Model No: AC55 AC87

Type:

Thread Size:

Pack Qty:

Safety Coupling Body 1/4"BSP - Female Model No. AC57

Coupling Body Tailpieces Model No. SEE BELOW Model No: AC76 AC77

Safety Coupling Body 1/4"BSPT - Male Model No. AC56

Thread Size:

Pack Qty:

PCL 100 Series Couplings Model No. SEE BELOW

Air Tool Oil Model No. SEE BELOW Coupling Body 1/2"BSPT - Male Model No. AC23 Type:

Thread Size:

Pack Qty: Type:

Screwed Adaptors - Male Model No. SEE BELOW Model No: AC25 AC26

Type:

Thread Size:

Model No: ATO500 ATO500S ATO1000 ATO1000S

Coupling Body 1/2"BSP - Female Model No. AC22 Thread Size:

Type:

Thread Size:

Pack Qty:

Adaptor Tailpieces Bore Hose Model No. SEE BELOW

Screwed Adaptor 3/8"BSP - Female Model No. AC24 Pack Qty:

Size:

Pack Qty:

Model No: AC27 AC28

Type:

Thread Size:

Pack Qty:

Air Line Couplings 1131 PCL Couplings & Adaptors Model No. SEE BELOW Manufactured in the UK. Ideal for workshop/engineering use with all types of wrenches, sanders and grinders.

Coupling Bodies Female Model No. SEE BELOW

Coupling Bodies Male Model No. SEE BELOW Model No: AC01 ACP01 AC01BP AC62 AC63

Type:

Thread Size:

Pack Qty:

Type:

Thread Size:

Pack Qty:

Hose Size:

Thread Size:

Pack Qty: Model No: AC66 AC67

Model No: AC18 ACP18 AC18BP AC69 AC70

Type:

Pack Qty:

Model No: AC38 AC08 AC39 AC09 AC40 AC41 AC42

Thread Size:

Type:

Hose Size:

Pack Qty:

Hose Size:

Pack Qty:

Tailpiece Adaptors Model No. SEE BELOW

Thread Size:

Pack Qty:

Screwed Tailpieces Male Hose Model No. SEE BELOW

Double End Hose Connectors Model No. SEE BELOW Model No: AC10 AC50 AC11 AC51

Type:

Screwed Adaptors Female Model No. SEE BELOW

Screwed Adaptors Male Model No. SEE BELOW Model No: AC04 ACP04 AC04BP AC19 AC68

Model No: AC13 ACP13 AC13BP AC64 AC65

Coupling Bodies Tailpiece Hose Model No. SEE BELOW

Hose Size:

Model No: AC20 AC06 AC21 AC07 AC71

Type:

Coned Tailpieces 1/4"BSP Union Nut Model No. SEE BELOW Pack Qty:

Model No: AC44 AC45 AC46

Hose Size:

Union Nut Size:

Double Union 1/4"BSPT Model No. AC12 Type: Thread Size: Pack Qty:

Male Thread

Air Tool Coupling Kit 1/4"BSP Model No. AC61

Union Nuts Model No. SEE BELOW Model No: AC48 AC49 AC52

Thread Size:

Air Tool Coupling Kit 1/4"BSP Model No. AC60

Pack Qty: AH2R. Thread Size: Pack Qty:

Thread Size: Pack Qty:

For our full range of Air Filters & Regulators, see pages 695 to 697

Pack Qty:

1132 Air Line Couplings PCL XF Couplings & Adaptors Model No. SEE BELOW

Coupling Bodies Male Model No. SEE BELOW

made in the UK.

Coupling Bodies Female Model No. SEE BELOW

Couplings Body Tailpieces Model No. SEE BELOW

at 100psi(7bar): 100-130cfm(2832-3681ltr/min).

Model No: AC30 AC32 AC78

Model No: Type: AC29 Female Thread AC31 Female Thread AC79 Female Thread

Model No: AC80 AC81 AC82

Type: Male Thread Male Thread Male Thread

Thread Size: 1/4"BSPT 3/8"BSPT 1/2"BSPT

Pack Qty: 1 1 1

Thread Size: 1/4"BSPT 3/8"BSPT 1/2"BSPT

Pack Qty: 2 2 2

Model No: Type: AC33 Female Thread AC85 Female Thread AC86 Female Thread

Thread Size: 1/4"BSP 3/8"BSP 1/2"BSP

Type: Tailpiece Tailpiece Tailpiece

Hose Size: 5/16" Bore 3/8" Bore 1/2" Bore

Pack Qty: 1 1 1

Adaptor Tailpieces Model No. SEE BELOW 100psi(7bar): 100-130cfm(2832-3681ltr/min).

100psi(7bar): 100-130cfm(2832-3681ltr/min).

100psi(7bar): 100-130cfm(2832-3681ltr/min). Type: Male Thread Male Thread Male Thread

Pack Qty: 1 1 1

Screwed Adaptors Female Model No. SEE BELOW

Screwed Adaptors Male Model No. SEE BELOW Model No: AC34 AC83 AC84

Thread Size: 1/4"BSP 3/8"BSP 1/2"BSP

Pack Qty: 2 2 2

Model No: AC35 AC36 AC37

Hose Size: 5/16" Bore 3/8" Bore 1/2" Bore

Pack Qty: 2 2 2

1/4"BSPT (M) x 1/4"BSP (F) Lever Ball Valve Model No. SA906 (1/4"BSP) inlet/outlet. Type:

Double Unions Model No. SEE BELOW Model No: SA1/1414 SA1/1212 SA1/1414FF SA1/1438F SA1/1412F SA1/3814F SA1/1214F SA1/1238F SA1/1234 SA1/3412F

Type: 1/4"BSPT Male to 1/4"BSPT Male 1/2"BSPT Male to 1/2"BSPT Male 1/4"BSP Female to 1/4"BSP Female 1/4"BSPT Male to 3/8"BSP Female 1/4"BSPT Male to 1/2"BSP Female 3/8"BSPT Male to 1/4"BSP Female 1/2"BSPT Male to 1/4"BSP Female 1/2"BSPT Male to 3/8"BSP Female 1/2"BSPT Male to 3/4"BSP Female 3/4"BSPT Male to 1/2"BSP Female

1/4"BSPT Male to 1/4"BSP Female

110pc Air Coupling Kit Model No. AC110K Contains a popular selection of air line couplings, hose maintenance and service engineers, as well as van and counter top sales. Supplied in a nine compartment composite Contents:

3/8"BSP (F) x 3/8"BSP (F) Lever Ball Valve Model No. SA907 Type:

3/8"BSP Female to 3/8"BSP Female

Air Line Couplings 1133 Air Line Couplings & Adaptors Model No. SEE BELOW

Coupling Bodies 1/4"BSPT - Male Model No. SEE BELOW Model No: ACX01 ACX01BP

Type:

Thread Size:

Coupling Bodies 1/4"BSP - Female Model No. SEE BELOW Pack Qty:

Screwed Adaptors 1/4"BSPT - Male Model No. SEE BELOW Model No: ACX04 ACX04BP

Type:

Thread Size:

Model No: ACX13 ACX13BP

Type:

Thread Size:

Twin Coupling Bodies Y-Adaptor Model No. ACX55 Pack Qty:

Air Tool Coupling Kit Model No. ACX60

Coupling Bodies 1/4"BSP - Female Model No. SEE BELOW Pack Qty:

Model No: ACX18 ACX18BP

Type:

Thread Size:

Pack Qty:

Thread Size: Pack Qty:

Swivel Screwed Adaptor 1/4"BSPT - Male Model No. ACX90

Swivel Screwed Adaptor 1/4"BSP - Female Model No. ACX91

PTFE Thread Sealing Tape - Pack of 10 Model No. PTFE1210

Type: Thread Size: Pack Qty:

Width: Length: Thickness: Pack Qty:

Z-Swivel Air Hose Connector 1/4"BSP Model No. SA902

Z-Swivel Air Hose Connector with Regulator 1/4"BSP Model No. SA900 On-Gun Air Pressure Regulator/Gauge Model No. AR01

Air Inlet Size: Air Outlet Size:

Maximum Pressure: Maximum Flow:

For our full range of Spray Guns, see pages 637 to 642

Welding Accessories 1135

1kg & 5kg packs

Hardfacing Welding Electrodes Model No. SEE BELOW

Dissimilar Welding Electrodes Model No. SEE BELOW

HV600 Hardfacing welding electrodes. Suitable for

Stainless Steel Welding Electrodes Model No. SEE BELOW

E312 Electrodes for welding dissimilar steels. Suitable for welding in all positions. Can be used on AC or DC currents.

shocks and compression. Can be used on AC or DC currents. Provides corrosion protection. Ideal for building

E316 Electrodes for welding stainless steel. Suitable for welding in all positions. Can be used on AC or DC currents.

hardfacing.

shovel buckets.

cold environments.

Model No:

Size:

WED1025 WED5025 WED1032 WED5032 WED1040 WED5040

Ø2.5 x 300mm Ø2.5 x 300mm Ø3.2 x 350mm Ø3.2 x 350mm Ø4 x 350mm Ø4 x 350mm

Welding Current: 70A 70A 100A 100A 135A 135A

Pack Weight: 1kg 5kg 1kg 5kg 1kg 5kg

Model No: WEHF1025 WEHF5025 WEHF1032 WEHF5032 WEHF1040 WEHF5040

Size: Ø2.5 x 300mm Ø2.5 x 300mm Ø3.2 x 350mm Ø3.2 x 350mm Ø4 x 350mm Ø4 x 350mm

Welding Current: 90A 90A 130A 130A 160A 160A

Pack Weight: 1kg 5kg 1kg 5kg 1kg 5kg

Model No: WESS1025 WESS5025 WESS1032 WESS5032 WESS1040 WESS5040

Size: Ø2.5 x 300mm Ø2.5 x 300mm Ø3.2 x 350mm Ø3.2 x 350mm Ø4 x 350mm Ø4 x 350mm

Welding Current: 70A 70A 100A 100A 135A 135A

Pack Weight: 1kg 5kg 1kg 5kg 1kg 5kg

Packs of 10

Welding Electrodes Model No. SEE BELOW

2.5kg & 5kg packs.

E6013 General purpose mild steel electrodes made to BS EN 757 standard. Suitable for welding in all positions. Model No: WE1020 WE1025 WE1032

Size: Ø2 x 300mm Ø2.5 x 300mm Ø3.2 x 300mm

Welding Current: 40-60A 55-100A 90-130A

Pack Qty: 10 10 10

Model No:

Size: Ø1.6 x 300mm Ø1.6 x 300mm Ø2 x 300mm Ø2 x 300mm Ø2.5 x 300mm Ø2.5 x 300mm Ø3.2 x 350mm Ø3.2 x 350mm Ø4 x 350mm Ø4 x 350mm

Welding Current: 20-50A 25-50A 40-60A 40-60A 55-100A 55-100A 90-130A 90-130A 130-190A 130-190A

Pack Weight: 2.5kg 5kg 2.5kg 5kg 2.5kg 5kg 2.5kg 5kg 2.5kg 5kg

300ml Anti-Spatter Pressure Spray Model No. MIG/722308 inhibitor to prevent corrosion. Innovative pressure spray system allows 99% of the active product to be expelled from the can. Up to six times the life of normal aerosols. Safe to use Non-toxic No acrid fumes Cleaner, easier and tidier welding Environmentally friendly Recyclable tin

Size: No.2 No.5 No.10

Stud Welding Nails Model No. SEE BELOW

Cutting Nozzles Model No. SEE BELOW Model No: ANMS-1/16 ANMS-1/32 ANMS-3/64

E6013 General purpose mild steel electrodes made to BS EN 757 standard. Produces a clean weld appearance.

WE2516 WE5016 WE2520 WE5020 WE2525 WE5025 WE2532 WE5032 WE2540 WE5040

Lightweight Welding Nozzles Model No. SEE BELOW Model No: SGA1/LW02 SGA1/LW05 SGA1/LW10

Welding Electrodes Model No. SEE BELOW

Size:

Model No: PS/0002 PS/000250 PS/0003 PS/000350

Size: 2.5 x 50mm 2.5 x 50mm 2 x 50mm 2 x 50mm

Pack Qty: 100 500 100 500

Stud Welding Washers Model No. PS/000450 Size: Pack Quantity:

For our full range of Welding Helmets, see pages 918 to 920

8 x 15 x 1.5mm 50

1136 Welding Accessories MIG Tips & Nozzles Model No. SEE BELOW

Contact Tips MB14 Model No. SEE BELOW Model No: MIG951 MIG952

Size:

Contact Tips MB15 Model No. SEE BELOW Torch Type:

Pack Qty:

Contact Tips MB25/36 Model No. SEE BELOW Model No: MIG916 MIG917 MIG918 MIG919

Size:

Torch Type:

Contents:

MIG953

Size:

Conical Nozzles Model No. SEE BELOW Torch Type:

Pack Qty:

Model No: MIG950 MIG929

Torch Type:

Pack Qty:

Contact Tips Aluminium MB25/36 Model No. SEE BELOW Model No: MIG921 MIG922

Starter Packs Model No. SEE BELOW Model No:

Pack Qty:

Model No: MIG956 MIG957 MIG912

Contact Tips Aluminium MB15 Model No. SEE BELOW

Torch Type:

Model No: MIG927 MIG928

Torch Type:

Pack Qty:

Contact Tips MB14/25/36 Model No. SEE BELOW Pack Qty:

Model No: TG100/2 TG100/3

Conical Nozzle MB15 Model No. MIG955 Pack Qty:

Size:

Torch Type:

Size:

Torch Type:

Pack Qty:

Cylindrical Nozzle Model No. 168.200105 Pack Qty:

Torch Type:

Pack Qty:

MIG954

Thin Headed Nozzle Model No. 168.200155 Torch Type:

Cylindrical Nozzle Model No. MIG915

Stud Welding Nozzle Model No. 120/722672 Pack Qty:

Torch Type:

Pack Qty:

Spot Weld Nozzle Model No. 168.200162 Torch Type:

Pack Qty:

Torch Type:

Spot Weld Nozzle Model No. 120/722687 Torch Type:

Pack Qty:

Diffuser Adaptor Model No. MIG913 Pack Qty:

Torch Type:

Model No: 120/722319 MIG914

Torch Type:

Pack Qty:

Torch Type:

Ã&#x2DC;8 Solid Carbide Spot Weld Drill Model No. AK4740

Diffuser Adaptor Model No. MIG926 Pack Qty:

Pack Qty:

Conical Nozzle Model No. MIG925

Nozzle Springs Model No. SEE BELOW

Conical Nozzle Model No. MIG924

Torch Type:

Pack Qty:

Diameter: Length:

Pack Qty:

Welding Accessories 1137 Welding Wire Model No. SEE BELOW Top quality wound welding wire manufactured to BS EN 150 14 341: 2008.

Aluminium Welding Wire - 5356(NG6) Model No. SEE BELOW

Mild Steel Welding Wire - A18 Model No. SEE BELOW Model No: MIG/7K06 MIG/7K08 MIG/777706 MIG/777708 MIG/888806 MIG/888808 MIG/888810 MIG/888816

Weight: 0.7kg 0.7kg 5kg 5kg 15kg 15kg 15kg 15kg

Diameter: Ø0.6mm Ø0.8mm Ø0.6mm Ø0.8mm Ø0.6mm Ø0.8mm Ø1mm Ø1.6mm

Model No: MIG/5K08A MIG/2KAL08 MIG/2/KAL/1

Weight: 0.5kg 2kg 2kg

Diameter: Ø0.8mm Ø0.8mm Ø1mm

4kg Copper Silicon Bronze Welding Wire 0.8mm C9 Model No. MIG/4K/BW08 Weight: Diameter:

4kg Ø0.8mm

Stainless Steel Welding Wire 308(S)93 Model No. SEE BELOW

Flux Cored Welding Wire Model No. SEE BELOW

Model No: MIG/1K/SS08 MIG/5K/SS08

Model No: TG100/1 TG100/4

Weight: 1kg 5kg

Diameter: Ø0.8mm Ø0.8mm

Weight: 0.9kg 4.5kg

Diameter: Ø0.9mm Ø0.9mm

MIG Torches Euro Connection Model No. SEE BELOW Professional MIG welding torches with contoured grip, hanging hook and heat-proof cable. Fitted with Euro connection enabling a quick and simple plug connection to welder. No wiring means torch can be disconnected and stored safely. Model No: MIG/N315 MIG/N325 MIG/N336 MIG/N415 MIG/N425 MIG/N436

Length: 3m 3m 3m 4m 4m 4m

Connector: Euro Euro Euro Euro Euro Euro

Torch Type: MB15 MB25 MB36 MB15 MB25 MB36

MIG Torches with Euro Connection Model No. SEE BELOW Professional torches with contoured grip and heat-proof cable. Euro connection enables quick and simple plug connection to welder. No wiring means torch can be disconnected and stored safely. Made in Europe. Model No: MIG/T15 MIG/T25 MIG/T36

Length: 3m 3m 3m

Connector: Euro Euro Euro

Torch Type: MB15 MB25 MB36

1kg Refillable Carbon Dioxide Gas Cylinder Model No. CO2/1KG Portable sized CO2 Sealey and other brand portable MIG welders/regulators.

* Welding duration is approximate and depends on machine settings.

Fill: Welding Duration*:

1kg 3.3hr C02/1KG/REFIL

Disposable Gas Cylinders Model No. SEE BELOW Portable sized disposable cylinders for the mobile welder. Fits Sealey and other makes of welder/regulator. When Model No: CO2/100 CO2/101 MIG/ARG/100 MIG/MIX/100

For our full range of Welding Protection, see page 632

Fill: Welding: Gas Type Duration*: 390g 1-1/4hr CO2 600g 2hr CO2 60ltr 1hr Argon 60ltr 1hr CO2(20%)/Argon (80%) Mix

1138 Soldering & Drill Chucks

Solder Sucker Model No. SD151

500ml Solder Fluxing Fluid Model No. SOLFLUX

250g Flux Paste Model No. SOL250

Lead-Free Soldering Wire Dispenser Tube Model No. SW20

Flux paste initially adheres components in place, it is then heated, melting the paste and forming a mechanical, as well as an electrical, connection.

temperatures.

Size:

250g

soldering. 500ml

Size:

10g

Soldering Wire Dispensing Stand Model No. SWD1 Steel construction supports sizes of wire up to 1kg. Features soldering wire guide and smooth reel action for iron holder for storing iron even when hot. Supplied with soldering sponge. Size (H x W x D):

Solder Wire Quick Flow 40/60 Model No. SEE BELOW

145 x 120 x 115mm Model No: Reel Size: Grade: Thickness: Tin/Lead: Melting Point:

SOL10 0.5kg 2% 3.25mm/10SWG 40/60 183-234째C

SOL16 0.5kg 2% 1.6mm/16SWG 40/60 183-234째C

SOL18 0.5kg 2% 1.2mm/18SWG 40/60 183-234째C

SOL22 0.5kg 2% 0.7mm/22SWG 40/60 183-234째C

DC005 2-13mm 1/2" x 20UNF Keyless

DC006 2-13mm 1/2" x 20UNF Metal - Keyless

L-Shape Chuck Key Model No. DC/J-38K-L wheels.

Drill Chucks Model No. SEE BELOW Model No: Capacity: Thread: Type:

DC001 1-10mm 3/8" x 24UNF Metal - Key

DC002 1.5-13mm 1/2" x 20UNF Metal - Key

DC003 0.8-10mm 3/8" x 24UNF Keyless

DC004 2-13mm 1/2" x 20UNF Keyless

Countersink Bits & Wire Brushes 1139 Countersink Bits Model No. SEE BELOW

6.3mm Countersink Bit HSS M2 - 3 x V Flutes Model No. CS063V

16.5mm Countersink Bit HSS M2 - 3 x V Flutes Model No. CS165V

8.3mm Countersink Bit HSS M2 - 3 x V Flutes Model No. CS083V

20.5mm Countersink Bit HSS M2 - 3 x V Flutes Model No. CS205V

Engineer's Wire Brush with Steel Fill Model No. WB02

10.4mm Countersink Bit HSS M2 - 3 x V Flutes Model No. CS104V

12.4mm Countersink Bit HSS M2 - 3 x V Flutes Model No. CS124V

3pc Countersink Bit Set HSS M2 - 3 x V Flutes Model No. CSSET3V Contents:

Stainless Steel Wire Brush Model No. WB05Y Length Fill/Overall:

Length Fill/Overall: Fill Pattern:

Brassed Steel Wire Brush Model No. WB05/R Length Fill/Overall:

20pc Cleaning & Decarbonising Brush Set Model No. VS1800 Engineer's Wire Brush with Scraper Model No. WB03 Length Fill/Overall: Fill Pattern:

Brush Type: Brush Fill/Overall: Brush Size: Extension Bar Length: Quick Release Coupling Diameter:

General Purpose Wire Brush Display Box of 24 Model No. WB05DB24 Length Fill/Overall: Pack Quantity:

For our full range of Soldering Tools & Accessories, see pages 224 to 228

1140 Drill Bits

6pc HSS Drill Bit Set - DIN 338 Model No. S01039 HSS Roll forged drill bits. Suitable for general workshop use in both hand and pillar drill applications. Six popular sizes supplied in storage case. Contents:

19pc Edge Ground HSS Drill Bit Set DIN 338 Model No. S0868

25pc Edge Ground HSS Drill Bit Set DIN 338 Model No. S0938

Edge ground HSS drill bits with a coating to help reduce friction and heat. Suitable for general workshop use in both

storage case.

Contents:

1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5,

15pc HSS Roll Forged Drill Bit Set Model No. S01087 help reduce friction and heat. Suitable for general workshop use in both hand and pillar drill applications. Supplied in storage case.

15pc Wood Drill Bit Set Model No. S01088

15pc Masonry Drill Bit Set Model No. S01089

Contents:

52pc Drill & Bit Accessory Set Model No. AK4752 48pc Drill Bit & Accessory Set Model No. S01080 1/4"Hex power tool bits. Supplied in display case. Contents:

8pc Tungsten Carbide Tipped Masonry Drill Bit Set Model No. AK5708

holder. Supplied in storage case. Contents:

Tungsten carbide tipped for prolonged life and

Drive Adaptor

Contents:

Stainless Steel Bit Holder

Drill Bits 1141 Individual HSS Roll Forged Drill Bits Model No. SEE BELOW & RIGHT

Individual HSS Fully Ground Drill Bits Model No. SEE BELOW & RIGHT

Manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Available in both metric and imperial.

Manufactured to DIN 338. 135° Split point tip is

Individual - Metric Model No. SEE BELOW Model No: DB010RF DB015RF DB020RF DB025RF DB030RF DB035RF DB040RF DB045RF DB050RF DB055RF DB060RF DB065RF DB070RF DB075RF DB080RF DB085RF DB090RF DB095RF DB100RF DB105RF DB110RF DB115RF DB120RF DB125RF DB130RF

Size: 1mm 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 5.5mm 6mm 6.5mm 7mm 7.5mm 8mm 8.5mm 9mm 9.5mm 10mm 10.5mm 11mm 11.5mm 12mm 12.5mm 13mm

Pack Qty: 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5

Individual - Metric Model No. SEE BELOW

HSS ROLL FORGED

Individual - Imperial Model No. SEE BELOW Model No: DBI18RF DBI316RF DBI732RF DBI14RF

clog-free swarf clearance. Available in both metric and imperial.

Size: 1/8" 3/16" 7/32" 1/4"

Pack Qty: 10 10 10 10

Model No: DB010FG DB015FG DB020FG DB025FG DB030FG DB035FG DB040FG DB045FG DB050FG DB055FG DB060FG DB065FG DB070FG DB075FG DB080FG DB085FG DB090FG DB095FG DB100FG DB105FG DB110FG DB115FG DB120FG DB125FG DB130FG

Size: 1mm 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 5.5mm 6mm 6.5mm 7mm 7.5mm 8mm 8.5mm 9mm 9.5mm 10mm 10.5mm 11mm 11.5mm 12mm 12.5mm 13mm

Pack Qty: 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5

Size: 1/8" 3/16" 7/32" 1/4"

Manufactured to DIN 338. 135° Split point tip is clog-free swarf clearance. HSS with 5% Cobalt for longer life. Available in both metric and imperial.

Individual - Metric Model No. SEE BELOW

HSS FULLY GROUND

Individual - Imperial Model No. SEE BELOW Model No: DBI18FG DBI316FG DBI732FG DBI14FG

Individual HSS Fully Ground Cobalt Drill Bits Model No. SEE BELOW & RIGHT

Pack Qty: 10 10 10 10

Model No: DB010CB DB015CB DB020CB DB025CB DB030CB DB035CB DB040CB DB045CB DB050CB DB055CB DB060CB DB065CB DB070CB DB075CB DB080CB DB085CB DB090CB DB095CB DB100CB DB105CB DB110CB DB115CB DB120CB DB125CB DB130CB

Size: 1mm 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 5.5mm 6mm 6.5mm 7mm 7.5mm 8mm 8.5mm 9mm 9.5mm 10mm 10.5mm 11mm 11.5mm 12mm 12.5mm 13mm

Pack Qty: 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5

HSS FULLY GROUND COBALT

Individual - Imperial Model No. SEE BELOW Model No: DBI18CB DBI316CB DBI732CB DBI14CB

Size: 1/8" 3/16" 7/32" 1/4"

Pack Quantity: 10 10 10 10

170pc HSS Fully Ground Drill Bit Assortment 1-10mm Model No. DBS170FG

170pc HSS Roll Forged Drill Bit Assortment 1-10mm Model No. DBS170RF Suitable for use with both hand and pillar drills.

Manufactured to DIN 338. 135° Split point tip is selfcentring, making for easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills.

170pc Fully Ground HSS Cobalt Drill Bit Assortment 1-10mm Model No. DBS170CB

Contents: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8mm (10 of each), 8.5, 9, 9.5, 10mm (5 of each)

General purpose HSS roll forged drill bits manufactured to

TECHNICAL

118° Point angles are used primarily in softer materials such as mild steels and cast irons.135° Split point should be used to cut harder steel materials. With a 135° drill point, you get thicker chips which allows holes to be drilled faster especially The length of the lips on a 135° point drill, measured from axis to the outer corners, is relatively short. This enables quicker penetration into the workpiece and reduces thrust and abrasion along the cutting edges.

For our full range of Pillar Drills, see pages 930 to 932

1142 Drill Bits

19pc HSS Roll Forged Drill Bit Set Model No. DBS19RF

19pc HSS Split Point Fully Ground Drill Bit Set Model No. AK47191

1-10mm in 0.5mm increments.

19pc HSS Fully Ground Cobalt Split Point Drill Bit Set Model No. AK4701 1-10mm in 0.5mm increments.

25pc HSS Roll Forged Drill Bit Set Model No. DBS25RF

25pc HSS Split Point Fully Ground Drill Bit Set Model No. AK47251

1-13mm in 0.5mm increments.

HSS Fully Ground Drill Bits DIN 338 Model No. SEE RIGHT 25pc HSS Fully Ground Cobalt Split Point Drill Bit Set Model No. AK4702

clearance. Available as a 19 or 25pc metric set.

1-13mm in 0.5mm increments.

19pc HSS Fully Ground Drill Bit Set Model No. AK4719

25pc HSS Fully Ground Drill Bit Set Model No. AK4725

1-10mm in 0.5mm increments.

1-13mm in 0.5mm increments.

9pc Ø10mm Spot Weld Cutter & Drill Bit Set Model No. AK4730

Ø10mm Spot Weld Cutter Model No. Z1 Suitable for drilling out spot welds on most vehicle panels. Features spring loaded centre point to guide cutting crown onto weld.

Spot Weld Cutter Crown - Pack of 2 Model No. Z1C2 Double sided cutter crowns for Model No's AK4730, AK4731 and Z1 Spot Weld Cutters. Pack of two.

Suitable for drilling out spot welds on most vehicle panels. Spot weld cutter features spring loaded centre point to guide cutting crown onto weld. 8mm Cobalt drill is suitable for more specialist materials including galvanized, boron and high stress steels. Solid cobalt stock allows re-sharpening, extending product life. Set includes replacement centre points and cutter crowns. Supplied in metal storage case. Contents: Spot Weld Cutter, 8mm Cobalt Spot Weld Drill, Centre Points (x2), Ø10mm Cutter Crowns (x5) Spot Weld Cutter Crown (Pack of 2): Z1C2

Step Drills & Grinding Points 1143

DOUBLE

FLUTE

3pc Double Flute HSS 4341 Step Drill Bit Set Model No. AK4746 Size Coverage #1: Size Coverage #2: Size Coverage #3: 26, 28, 30mm

4, 5, 6, 7, 8, 9, 10, 11, 12mm 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mm 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24,

3pc Spiral Flute HSS 4341 Step Drill Bit Set Model No. AK4749 Model No:

Size: #2 #3

Size Coverage #1: Size Coverage #2: Size Coverage #3: 26, 28, 30mm

DOUBLE

FLUTE

3pc Double Flute HSS M2 Step Drill Bit Set Model No. AK4733 Size Coverage #1: Size Coverage #2: Size Coverage #3: 26, 28, 30mm

4, 5, 6, 7, 8, 9, 10, 11, 12mm 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mm 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24,

Model No:

Size: #2 #3

Model No:

Size: #2 #3

3pc Spiral Flute HSS M2 Step Drill Bit Set Model No. AK4743 Model No:

Size: #2 #3

Size Coverage #1: Size Coverage #2: Size Coverage #3: 26, 28, 30mm

4, 5, 6, 7, 8, 9, 10, 11, 12mm 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mm 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24,

Mounted Wheels - 6mm Shaft Model No. SEE BELOW

Ø8mm Solid Carbide Spot Weld Drill Bit Model No. AK4740

HSS Cobalt Spot Weld Drill Bits Model No. SEE BELOW

Model No: AK4728 Diameter: Length:

Ø8mm 44mm

Size: Ø6mm Ø6mm Ø8mm Ø8mm

Length: 66mm 93mm 80mm 120mm

Diameter: Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm

For our full range of Air Die Grinders, see pages 724 to 726

Diameter: Ø10mm Ø20mm Ø20mm Ø20mm Ø25mm Ø16mm Ø25mm Ø25mm

Length: 25mm 20mm 26mm 25mm 25mm 26mm 25mm 25mm

Length: 52mm 50mm 52mm 52mm 52mm 52mm 52mm 52mm

1144 Rotary Burrs IMPORTANT SAFETY WARNING! Always wear eye protection when using these tools. For our full range of safety equipment, see pages 910 to 925.

Ø10mm Tungsten Carbide Rotary Burrs Model No. SEE BELOW Rotary burrs manufactured from Tungsten Carbide with No. 6 cut (universal) with various shaped heads. For use on soft and hard metal, including welded seams. Supplied in plastic storage box. Available individually or as a 3 or 5pc set (See ).

Cylindrical Front End Cut Ø10mm

Cylindrical Ball Nose Ø10mm

Arc Pointed Nose Ø10mm

3pc Tungsten Carbide Rotary Burr Set Model No. SDBK3 SDB01, SDB02, SDB03

Arc Round Nose Ø10mm

Oval Ø10mm Model No:

Head Shape: Cylindrical Front End Cut Cylindrical Ball Nose Arc Pointed Nose Oval Arc Round Nose Conical Ball Nose

Shaft Ø: Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm

Head Ø: Ø10mm Ø10mm Ø10mm Ø10mm Ø10mm Ø10mm

Conical Ball Nose Ø10mm Head Length: 20mm 20mm 20mm 16mm 20mm 25mm

Overall Length: 65mm 65mm 65mm 65mm 65mm 65mm

Ø10mm Tungsten Carbide Rotary Burrs Ripper/Coarse Model No. SEE BELOW

5pc Tungsten Carbide Rotary Burr Set Model No. SDBK5 SDB01, SDB02, SDB03, SDB05, SDB06

Rotary burr with cylindrical front end cut 10mm head. Manufactured from Tungsten Carbide with coarse teeth for aluminium or plastic cutting. Supplied in plastic storage box. Available individually or as a 3 or 5pc set (See ).

Cylindrical Front End Cut Ø10mm

Cylindrical Ball Nose Ø10mm

Oval Ø10mm

3pc Tungsten Carbide Rotary Burr Set Ripper/Coarse Model No. SDBCK3 SDBC1, SDBC2, SDBC3 Arc Round Nose Ø10mm Model No:

Head Shape: Cylindrical Front End Cut Cylindrical Ball Nose Oval Arc Round Nose Flame Conical Ball

Conical Ball Ø10mm

Flame Ø10mm Shaft Ø: Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm

Head Ø: Ø10mm Ø10mm Ø10mm Ø10mm Ø10mm Ø10mm

Head Length: 20mm 20mm 16mm 20mm 25mm 25mm

Overall Length: 65mm 65mm 65mm 65mm 65mm 65mm

Deburring Tool with Blade Model No. DB02

Deburring Tool with Spare Blade Model No. DB01

and edges.

Composite handgrip with interchangeable swivel cutting bits. Spare cutter stored in handle. Suitable for deburring pipes and sheet materials.

Length:

147mm

Length:

150mm

5pc Tungsten Carbide Rotary Burr Set Ripper/Coarse Model No. SDBCK5 SDBC1, SDBC2, SDBC3, SDBC4, SDBC6

Rotary Burrs & Hole-Saws 1145

Burr Ball

Ball Nose Cylinder

Cylinder

Ball Nosed Taper

Pointed Tree

Ball Nosed Tree

Micro Carbide Burrs 3mm - Packs of 3 Model No. SEE BELOW Micro rotary burrs manufactured from Tungsten Carbide, with Ø3mm shanks and various shaped heads. For use on soft supplied in plastic storage box.

5pc Micro Burr Set Model No. MCBSET01

Model No:

Head Shape:

Shaft Size:

Overall Length:

Head Length:

Pack Qty:

Micro rotary burrs manufactured from Tungsten Carbide, with Ø3mm shanks and various shaped heads. For use on soft and hard metal, including welded seams. Great for in plastic storage box.

9pc Plumber's Hole-Saw Kit Model No. HKP9

9pc Electrician's Hole-Saw Kit Model No. HKE9

backing for heavy-duty performance. Vari-pitch tooth

pilot drills. Includes simple arbor for saws between Ø14-30mm and quick release arbor for saws between

Contents:

Pilot Drills Model No. SEE BELOW Model No:

Application:

Length:

Ø14-30mm Arbor with Pilot Drill for Hole-Saws Model No. HKA1430 Arbor with pilot drill for hole-saws Ø14-30mm. Shank Size: Hole-Saw Size:

HSS Drill Bit Counter Top Dispensers Model No. SEE BELOW Model No: Contents: 11.5, 12, 12.5, 13mm (10 of each)

Type: Roll Forged Fully Ground

Quantity: 250 250

Ø14-30mm

Ø32-152mm Arbor with Pilot Drill for Hole-Saws Model No. HKA32152 Arbor with pilot drill for hole-saws Ø32-152mm. Shank Size: Hole-Saw Size:

For our full range of Air Die Grinders, see pages 724 to 726

Ø32-152mm

1146 Abrasive Papers

25mm x 25m Emery Roll - Blue Twill Model No. SEE BELOW Model No: ER252540 ER252560 ER252580 ER2525120 ER2525150

Width: 25mm 25mm 25mm 25mm 25mm

Length: 25m 25m 25m 25m 25m

25mm x 50m Emery Roll - Blue Twill Model No. SEE BELOW Grit: 40 60 80 120 150

Model No: ER255040 ER255060 ER255080 ER2550120 ER2550150

Width: 25mm 25mm 25mm 25mm 25mm

Length: 50m 50m 50m 50m 50m

50mm x 50m Emery Roll - Blue Twill Model No. SEE BELOW Grit: 40 60 80 120 150

Model No: ER505040 ER505080

Width: 50mm 50mm

Length: 50m 50m

Grit: 40 80

230 x 280mm Wet & Dry Paper - Packs of 25 Model No. SEE BELOW

25mm x 50m Engineer’s Emery Rolls - Brown 50mm x 50m Engineer’s Emery Rolls - Brown Model No. SEE BELOW Model No. SEE BELOW Model No: ERB255080 ERB2550120

Width: 25mm 25mm

Length: 50m 50m

Grit: 80 120

230 x 280mm Emery Sheets - Blue Twill - Packs of 25 Model No. SEE BELOW Model No: ES232840 ES232860 ES232880 ES2328120 ES2328150

Grit: 40 60 80 120 150

Pack Qty: 25 25 25 25 25

150 x 230mm Abrasive Finishing Pads Fine - Packs of 10 Model No. SEE BELOW Long lasting. Flexible for contoured work surfaces. Waterproof and solvent resistant. Model No:

Colour/Grade: Green/Fine Maroon/Medium Grey/Ultra Fine

Application: General Purpose Prior to Primer Prior to Clear Coat

Model No: ERB505080 ERB5050120

Width: 50mm 50mm

Length: 50m 50m

Grit: 80 120

230 x 280mm Production Paper Packs of 25 Model No. SEE BELOW Model No: PP232840 PP232860 PP232880

Grit: 40 60 80

Model No: WD2328120 WD2328180 WD2328240 WD2328320 WD2328400 WD2328600 WD2328800 WD23281000 WD23281200 WD23281500 WD23282000

Grit: 120 180 240 320 400 600 800 1000 1200 1500 2000

Pack Qty: 25 25 25 25 25 25 25 25 25 25 25

Grade: #00 Ultra Fine #0 Fine #1 Medium #3 Coarse

Weight: 450g 450g 450g 450g

450g Steel Wool Model No. SEE BELOW Pack Qty: 25 25 25

Model No: SW00 SW0 SW1 SW3

Abrasive Wheels & Discs 1147

Flap Wheels 6mm Shaft Model No. SEE BELOW

Zirconium Flap Discs Model No. SEE BELOW

Model No:

Model No: FD10040 FD10060 FD10080 FD11540 FD11560 FD11580 FD12540 FD12560 FD12580

Grit: 40 60 80

Disc Size Metric: Ø100mm Ø100mm Ø100mm

Disc Size Imperial: Ø4" Ø4" Ø4"

Bore: Ø16mm Ø16mm Ø16mm

FW251060 FW251080 FW252060 FW252080 FW402040 FW402060 FW402080 FW403040 FW403060 FW403080 FW502540 FW502560 FW502580 FW603040 FW603060 FW603080 FW805040 FW805060 FW805080

Shaft:

Wheel Size:

Wheel Thickness:

Grit:

Ø6mm Ø6mm Ø6mm

Ø40mm Ø40mm Ø40mm

30mm 30mm 30mm

40 60 80

Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm Ø6mm

Ø60mm Ø60mm Ø60mm Ø80mm Ø80mm Ø80mm

30mm 30mm 30mm 50mm 50mm 50mm

40 60 80 40 60 80

Sanding Discs - Packs of 25 Model No. SEE BELOW Model No:

Grit:

FBD10024 FBD10036 FBD10050

Disc Size Metric:

Disc Size Imperial:

Pack Qty:

FBD11524 FBD11536 FBD11550

Quick Change Backing Pads 1/4"UNC Model No. SEE BELOW Model No:

Pad Size:

Quick Change Sanding Discs - Packs of 10 Model No. SEE BELOW

Quick Change Preparation Pads - Packs of 10 Model No. SEE BELOW

Model No:

Disc Size: Ø50mm Ø50mm

Grit: 60 80

Pack Qty: 10 10

Ø75mm Ø75mm

60 80

10 10

Pad Size:

Grade:

Pack Qty:

Thread Size:

Ø75mm Sanding Discs - Packs of 10 Model No. SEE BELOW Model No:

For our full range of Electric Angle Grinders, see pages 758 to 759

Disc Size: Ø75mm Ø75mm

Grit: 60 80

Pack Qty: 10 10

1148 Cutting & Grinding

PTC11510CET (Tin of 10)

Metal Cutting Discs Model No. SEE BELOW

Flat metal cutting discs. Model No's ending CT and CET suitable for cutting stainless steel. Model No: PTC/3CT PTC/3C PTC/3C5 (Pack of 5) PTC/100CET PTC/100CET5 (Pack of 5) PTC/100CT PTC/100C PTC/115CET PTC/115CET5 (Pack of 5) PTC11510CET (Tin of 10) PTC/115CT PTC/115CT5 (Pack of 5) PTC/115C PTC/125CET PTC/125CT PTC/125C PTC/150C PTC/180C PTC/230C PTC/230CT PTC/300C PTC/355C

Disc Size Metric: Ø75 x 1.2mm Ø75 x 2mm Ø75 x 2mm Ø100 x 1.2mm Ø100 x 1.2mm Ø100 x 1.6mm Ø100 x 3mm Ø115 x 1.2mm Ø115 x 1.2mm Ø115 x 1.2mm Ø115 x 1.6mm Ø115 x 1.6mm Ø115 x 3mm Ø125 x 1.2mm Ø125 x 1.6mm Ø125 x 3mm Ø150 x 1.6mm Ø180 x 3mm Ø230 x 3mm Ø230 x 1.9mm Ø305 x 2.8mm Ø355 x 3mm

Disc Size Imperial: Ø3" Ø3" Ø3" Ø4" Ø4" Ø4" Ø4" Ø4-1/2" Ø4-1/2" Ø4-1/2" Ø4-1/2" Ø4-1/2" Ø4-1/2" Ø5" Ø5" Ø5" Ø6" Ø7" Ø9" Ø9" Ø12" Ø14"

Bore: Ø10mm Ø10mm Ø10mm Ø16mm Ø16mm Ø16mm Ø16mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø22mm Ø25.4mm Ø25.4mm

Metal Grinding Discs Model No. SEE BELOW Depressed centre metal grinding discs. Model No: PTC/50G PTC/100G PTC/115G PTC/125G PTC/230G

Disc Size Metric: Ø58 x 4mm Ø100 x 6mm Ø115 x 6mm Ø125 x 6mm Ø230 x 6mm

Ø115 x 1.6mm Universal Cutting Disc 22.2mm Bore Model No. PTC/115MC Suitable for cutting mild steel, stainless steel (inox), UPVC, aluminium and masonry. Disc Size: Bore:

Ø115 x 1.6mm Ø22.2mm

Disc Size Imperial: Ø2-1/2" Ø4" Ø4-1/2" Ø5" Ø9"

Bore: Ø9.5mm Ø16mm Ø22mm Ø22mm Ø22mm

10 Packs of 10 Metal Cutting Discs Ø115 x 1.2mm - Display Box Model No. PTC11510CETD Flat cutting disc for use with grinding and cutting power tools. Suitable for cutting stainless steel. Contents:

PTC11510CET (x10)

Backing Pads & Nuts Model No. SEE BELOW Backing pads for grinders and sanders. Model No:

Pad Size: Ø90mm Ø104mm Ø171mm

Lock nuts for backing pads.

Polycarbide Wheels Model No. SEE BELOW Versatile abrasive wheels for use with Sealey and other leading makes of grinding and a less harsh abrasive is needed. Model No: Size: Spindle Size: Model No: Size: Bore:

PTC/SW100 Ø100 x 13mm 6mm PTC/CW115 Ø115 x 13mm 22mm

10-30mm Universal Pin Spanner Model No. PTC/UPW Adjustable from 10-30mm to suit most pin discs found on air and electric grinders handle. Size/Type:

10-30mm/4mm Pins

Suitability: Ø100mm Ø115mm Ø180mm

Thread Size: 5/8"UNC Thread Size: M10 x 1.25mm M10 x 1.5mm M14 x 2mm

Wire Brushes 1149

75mm Twist Knot Flat Wire Wheel 6mm Shaft Model No. TKFBS75

Twist Knot Wire Cup Brushes Model No. SEE BELOW

Conical Wire Brushes Model No. SEE BELOW

Suitable for use with power tools up to the maximum rated

Model No: TKCB652 TKCB65 TKCB651 TKCB100

Thread: M10 x 1.25mm M10 x 1.5mm M14 x 2mm M14 x 2mm

Diameter: Ø65mm Ø65mm Ø65mm Ø100mm

Max. Speed: 12500rpm 12500rpm 12500rpm 8500rpm

Model No: CWB100 CWB101 CWB115

Thread: M10 x 1.5mm M14 x 2mm M14 x 2mm

Diameter: Ø100mm Ø100mm Ø115mm

Max. Speed: 12500rpm 12500rpm 12500rpm

Wire Cup Brushes Model No. SEE BELOW

Flat Wire Brushes Model No. SEE BELOW

Suitable for use with power drills. Ø6mm Shaft. Crimped

Model No: SCB50 SCB75

Model No: SFB50 SFB75 SFB100

Shaft: Ø6mm Ø6mm

Diameter: Ø50mm Ø75mm

Max. Speed: 4500rpm 4500rpm

Brassed Steel Cup Brushes Model No. SEE BELOW Suitable for use with power tools. Crimped brassed steel Model No: CBC75 CBC752 CBC100 CBC125

Thread: M10 x 1.5mm M14 x 2mm M14 x 2mm M14 x 2mm

Diameter: Ø75mm Ø75mm Ø100mm Ø125mm

Max. Speed: 12500rpm 12500rpm 8500rpm 6500rpm

Shaft: Ø6mm Ø6mm Ø6mm

Diameter: Ø50mm Ø75mm Ø100mm

Max. Speed: 4500rpm 4500rpm 4500rpm

Ø6mm shaft. Model No: SFBS50 SFBS75 SFBS100

Shaft: Ø6mm Ø6mm Ø6mm

Diameter: Ø50mm Ø75mm Ø100mm

Max. Speed: 4500rpm 4500rpm 4500rpm

Trim Length: Trim Diameter:

Model No: VS1802 VS1803

Contents:

Contents: Brushes; Wire Cup; 50mm, 75mm, Flat Wire; 50mm, 75mm, 25mm

Ø6mm 4500rpm

Flat Wire Brushes Model No. SEE BELOW

Flat Top Decarbonising Brushes Model No. SEE BELOW

5pc Wire Brush Set Model No. BWBS05

Shaft: Maximum Speed:

Ø75mm Ø6mm 12000rpm

2pc Decarbonising Brush Set Model No. VS1801

3pc Wire Brush Set Model No. BWBS03 Brushes; 50mm Wire Cup,

Diameter: Shaft Diameter: Maximum Speed:

Shaft: Maximum Speed:

Ø6mm 4500rpm

Brushes; Flat Wire; 25, 40, 50,

Shaft: Maximum Speed:

Trim Length: 20mm 28mm

Trim Diameter: Ø13mm Ø24mm

Wire Brushes Assorted Sizes Display Box of 40 Model No. BWBS40DB

8pc Wire Brush Set Model No. BWBS08 Contents:

Shaft: Ø6mm Ø6mm

Ø6mm 4500rpm

For our full range of Cordless Drills, see pages 746 to 751 & 755

Contents: Brushes; Wire Cup; 50, 75mm, Shaft: Maximum Speed:

Ø6mm 4500rpm

1150 Abrasive Wheels & Saw Blades

Grinding Stones Model No. SEE BELOW

Wire Wheels Model No. SEE BELOW

Buffing Wheels Model No. SEE BELOW

Aluminous oxide stones. Supplied with reduction bushes where applicable.

Supplied with reduction brushes.

Manufactured entirely from cotton. Soft density. Provides

Model No: Size/Bore: NBG150/GWC Ø150 x 16mm/Ø13mm NBG150/GWF Ø150 x 16mm/Ø13mm BG150/15 Ø150 x 20mm/Ø32(Ø13)mm BG150/16 Ø150 x 20mm/Ø32(Ø13)mm BG200/15 Ø200 x 25mm/Ø16mm BG200/16 Ø200 x 25mm/Ø16mm

BG150/WW1 BG150/WW2 BG200/WW1

Grade: A36Q Coarse A60P Fine A60P Fine A36Q Coarse A60P Fine A36Q Coarse

Wet & Dry Stone Wheels Model No. SEE BELOW Size: Bore:

Ø150 x 13mm/Ø13mm Ø150 x 20mm/Ø13mm Ø200 x 13mm/Ø16mm

Narrow Wide Narrow

BG150BW BG200BW BG150BWC BG200BWC

Ø150 x 13mm/Ø13mm Ø200 x 16mm/Ø16mm Ø150 x 13mm/Ø13mm Ø200 x 16mm/Ø16mm

Fine Fine Coarse Coarse

32 40 40 40

Ø100mm Angled Wire Wheel for SA695 Model No. SA695WA

Ø100mm Straight Wire Wheel for SA695 Model No. SA695WS

Angled wire wheel for Model No. SA695 Smart Eraser Kit.

Straight wire wheel for Model No. SA695 Smart Eraser Kit.

Size:

Ø100 x 25mm

SM521GW200W Ø200 x 40mm Ø20mm 130rpm

Size: Bore:

Ø200 x 20mm Ø20mm 320rpm

Size: Bore:

Ø125 x 50mm Ø12.7mm 2850rpm

Ø100 Deluxe Stripe Removing Pad Model No. SA95PXPLUS 'Toothed' cutting edges rapidly remove pinstripes or

Ø100mm Polycarbide Abrasive Wheel for SA695 Model No. SA695A Abrasive wheel for Model No. SA695 Smart Eraser Kit.

Pad Size:

Multipurpose Cut-Off Saw Blades Model No. SEE BELOW Multipurpose blades suitable for cutting steel, aluminium, wood and plastic. Cuts nail-embedded wood easily and cuts steel with reduced sparks and heat. Model No: SMS216B SMS255B

Ø216 x 2.4mm/Ø30mm Ø250 x 2.4mm/Ø30mm

48 60

Ø100 x 27mm 1/4"UNC Ø50mm 4000rpm

Ø100 x 28mm 1/4"UNC

Ø88 Stripe Removing Pad Model No. SA95/PX

Ø88 Stripe Removing Pad Model No. SA95/PXM Suitable for use in a drill chuck, for removing pinstripes Size:

Size:

Ø88 x 16mm Ø38mm 4000rpm

Suitable for removing pinstripes or double-sided tape from Pad Size:

Ø88 x 16mm 1/4"UNC Ø38mm 4000rpm

Cutting Oil & Bandsaw Blades 1151

500ml Tapping & Cutting Fluid Model No. SCSCF400 range of machining and drilling operations. High viscosity with excellent lubricating properties. Size:

500ml

WHY USE CUTTING OIL Cutting oil reduces friction and aids cooling, which helps to prolong blade life, as well as helping to reduce staining and corrosion on material being cut.

Bandsaw Blades Model No. SEE BELOW Flexible bandsaw blades with hardened steel teeth. Suitable for cutting wood, plastics and thin metal sheet. Model No: SM1303B06 SM1303B10 SM1303B14 SM1303B24 SM1304B06 SM1304B10 SM1304B14 SM1304B24 SM1305B06 SM1305B10 SM1305B14 SM1305B24 SM1306B06 SM1306B10 SM1306B14 SM1306B24

Blade Size: 1400 x 6.5mm 1400 x 6.5mm 1400 x 6.5mm 1400 x 6.5mm 1712 x 10mm 1712 x 10mm 1712 x 10mm 1712 x 10mm 2240 x 12mm 2240 x 12mm 2240 x 12mm 2240 x 12mm 2400 x 12mm 2400 x 12mm 2400 x 12mm 2400 x 12mm

Pitch: Application: 6tpi SM1303 10tpi SM1303 14tpi SM1303 24tpi SM1303 6tpi SM1304 10tpi SM1304 14tpi SM1304 24tpi SM1304 6tpi SM1305 10tpi SM1305 14tpi SM1305 24tpi SM1305 6tpi SM1306 10tpi SM1306 14tpi SM1306 24tpi SM1306

Suitability: Wood Metal Wood/Metal

5ltr Universal Maintenance Fluid with PTFE Model No. SCS0105

Suitable for lubricating and cooling drill bit or blade and workpiece when cutting mild steel. Size:

5ltr

5ltr Soluble Cutting Oil Model No. SCO/5L

moisture and contains rust inhibitor. Cleans, lubricates and degreases target area. Silicon free formula suitable for bodyshop use. Ideal for using with small spray trigger bottles. Size:

5ltr

Suitable for lubricating and cooling drill bit or blade and workpiece when cutting mild steel. Size:

5ltr

10tpi

See pages 947 to 949 for our full range of Bandsaws.

15tpi 20tpi

25tpi

Scroll Saw Blades - Packs of 12 Model No. SEE BELOW Scroll saw blades with hardened steel teeth suitable for cutting wood, plastics and thin sheet metal. Model No: SM43B10 SM43B15 SM43B20 SM43B25

Length: 128mm 128mm 128mm 128mm

Pitch: 10tpi 15tpi 20tpi 25tpi

Pack Qty: 12 12 12 12

Bandsaw Blades Model No. SEE BELOW

Jigsaw Blades - Packs of 3 Model No. SEE BELOW Model No: SJS700B06 SJS700B12 SJS700B24

5ltr Neat Cutting Oil Model No. NCO/5L

Pitch: 6tpi 12tpi 24tpi

Pack Qty: 3 3 3

Correct Selection Of Blades

For long blade life, it is important to select the correct blade for the material to be cut. As an example, we indicate here the relevant blade selection information for cutting steel (box section, angle iron and C-section): Material Size: 2-3mm

3-5mm

Over 5mm

Blade tpi:

18-24

14-18

8-14

Blade Speed:

24-71m per minute.

For information regarding blade selection for other materials, please contact our technical sales department. Blade breakage caused by incorrect blade selection is not covered by our guarantee.

Model No: SM5/113/6 SM5/113/10 SM5/113 SM5/113/24 SM35/B04 SM35/B08 SM35/B14 SM35/B18 SM35/B24 SM353CE/B04 SM353CE/B08 SM353CE/B14 SM353CE/085 SM354B14 SM354B18 SM354B24 SM354B610BIM SM355B14

Pitch: 6tpi 10tpi 14tpi 24tpi 4tpi 8tpi 14tpi 18tpi 24tpi 4tpi 8tpi 14tpi 4/6 Vari-Pitch, Bi-Metal 14tpi 18tpi 24tpi 6/10 Vari-Pitch, Bi-Metal 14tpi

Sealey Application: SM5, SM65 SM5, SM65 SM5, SM65 SM5, SM65 SM35CE SM35CE SM35CE SM35CE SM35CE SM353CE SM353CE SM353CE SM353CE SM353CE SM353CE SM353CE SM353CE SM353CE

For our full range of Knives, Scrapers & Hacksaws, see pages 209 to 215

Blade Size: 1638 x 13 x 0.63mm 1638 x 13 x 0.63mm 1638 x 13 x 0.63mm 1638 x 13 x 0.63mm 2362 x 19 x 0.81mm 2362 x 19 x 0.81mm 2362 x 19 x 0.81mm 2362 x 19 x 0.81mm 2362 x 19 x 0.81mm 3035 x 25 x 0.89mm 3035 x 25 x 0.89mm 3035 x 25 x 0.89mm 3035 x 25 x 0.89mm 2105 x 20 x 0.9mm 2105 x 20 x 0.9mm 2105 x 20 x 0.9mm 2100 x 20 x 0.8mm 2450 x 27 x 0.9mm

1152 Staples & Blades Staples, Hoops & Nails for AK7061 Model No. SEE BELOW Not Illustrated A selection of replacement staples, hoops and nails for Model No. AK7061 and other popular brands.

Staples

CT8125S01

CT8125S02

CT8125S03

Cable Staples - Packs of 200 Model No. SEE BELOW Type: Round Cable: Round Cable: Round Cable: Flat Cable:

Size: Ø11.5-12.5mm Ø9.5-11mm Ø8-9mm 4-7mm Thick, <12.5mm Wide

Model No: CT8125S01 CT8125S02 CT8125S03

Model No: AK7061/8 AK7061/9 AK7061/2 AK7061/3 AK7061/4 AK7061/1 AK7061/5 AK7061/7 AK7061/6

Nails

Hoops

Type/Size: Staples/6mm Staples/8mm Staples/10mm Staples/12mm Staples/14mm Nails/10mm Nails/12mm Nails/14mm Hoops/12mm

Pack Qty: 500 500 500 500 500 500 500 500 500

Steel Hog Rings - Pack of 2500 Model No. SHR2010 Steel hog rings with galvanised coating. Pointed ends make these hog rings particularly suited to vehicle upholstery repairs. Suitable for a wide variety of uses. 2500 Hog rings per box as 50 strips of 50. See page 600 for our Hog Ring Pliers.

Razor Scraper Blades Model No. SEE BELOW Compatible with Model No's AK52504, AK52507, AK867, VS500 and other popular makes. Model No: AK867/1 AK867B100 AK52507/1 AK52507/2

Blade Type:

Pack Qty:

Thin Angled Thick

100 5 5

Utility Knife Blade - Pack of 10 Model No. AK86/B Suitable for use with standard/traditional utility knives. Pack of 10.

Composite Scraper Blades Model No. SEE BELOW Compatible with Model No's AK52504, AK52507, AK867, VS500 and other popular makes. Model No: AK52507/3 AK5228

Blade Type:

Pack Qty:

Composite

100

Retracting Razor Scraper with Blades Model No. AK867 Chrome plated steel construction with retracting blade

Flexible bi-metal HSS blades with superior performance on a wide range of materials. Tooth Pitch: 18tpi 24tpi 32tpi 18tpi 24tpi 32tpi 18tpi 24tpi 32tpi 40 x 18tpi, 35 x 24tpi, 25 x 32tpi

3-in-1 Staple and nail gun. Fitted with adjustable power control and staple remover. Features removable sole plate for easy clearance of blockages. Supplied with starter pack of 1500 nails and staples. Suitable for a wide range of applications. Supplied in storage case. See page 229

Snap-Off Blade - Pack of 10 Model No. AK86R/B

Bi-Metal Hacksaw Blades HSS Model No. SEE BELOW Model No: HSB0218 HSB0224 HSB0232 HSB1018 HSB1024 HSB1032 HSB5018 HSB5024 HSB5032 HSB100KIT

Heavy-Duty Staple & Nail Gun Model No. AK7061

Pack Qty: 2 2 2 10 10 10 50 50 50 100

Length:

100mm

300mm Bi-Metal 20/24tpi Vari-Pitch Hacksaw Blades Model No. SEE BELOW Flexible bi-metal HSS blades with unique variable pitch materials. Standard pitch 20-24tpi. Model No: HSB/1 HSB/10 HSB/50

Qty: Single Pack of 10 Pack of 50

150mm Junior Hacksaw Blade - Pack of 10 Model No. S0527.B 150mm hacksaw blades suitable for Model No. S0527 and other popular makes. Pack of 10.

Sanding Belts & Discs 1153

Ø50mm Sanding Discs - Hook-and-Loop Model No. SEE BELOW

Sanding Belts Model No. SEE BELOW Model No: SB0010 SB0011 SB0012 SB0013 SB0014 SB0015 SB0016 SB0017 SB0018 SB0019 SB0020 SB0021 SB0022 SB005 SB006 SB007 SB008 SB009 SM1300B610

Nominal Size: 30 x 540mm 30 x 540mm 100 x 1220mm 100 x 1220mm 100 x 915mm 100 x 915mm 100 x 915mm 150 x 1220mm 150 x 1220mm 25 x 762mm 25 x 762mm 25 x 762mm 20 x 1000mm 50 x 686mm 50 x 686mm 50 x 686mm 30 x 540mm 30 x 540mm 610 x 100mm

Grit: 60 80 80 100 60 80 100 80 100 120 60 80 80 120 60 80 100 40 80

Pack Qty: 5 5 1 1 1 1 1 1 1 5 5 5 1 5 5 5 5 5 1

Model No: SA701D60G SA701D80G SA701D120G

Disc Size: Ø50mm Ø50mm Ø50mm

Grit: 60 80 120

Pack Qty: 10 10 10

Sanding Discs - Adhesive Backed Model No. SEE BELOW Model No: SSD01 SSD02 SSD03

Nominal Size: 10 x 330mm 10 x 330mm 10 x 330mm 10 x 330mm 10 x 330mm 20 x 520mm 20 x 520mm 20 x 520mm 20 x 520mm 8 x 456mm 12 x 456mm 8 x 456mm 12 x 456mm 8 x 456mm 12 x 456mm 8 x 456mm 12 x 456mm 8 x 456mm 12 x 456mm

Model No: SM1301SS03 SM1301SS04 SM1301SS09 SM1301SS10 SM1301SS12 SM1301SS14 SM1301SS18 SM1300B13 SM1300B19 SM1300B25 SM1300B38 SM1300B50

Nominal Size: Ø19 x 90mm Ø25 x 90mm Ø38 x 140mm Ø44 x 140mm Ø44 x 140mm Ø50 x 140mm Ø76 x 140mm Ø13 x 90mm Ø19 x 90mm Ø25 x 90mm Ø38 x 90mm Ø50 x 90mm

Grit: 120 60 120 60 120 80 120 80 80 80 80 80

Pack Qty: 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

Pack Qty: 5 1 1

Ø305mm Sanding Discs Model No. SEE BELOW

Model No:

After

Grit: 40 60 80 100 120 60 80 100 120 40 40 60 60 80 80 100 100 120 120

Grit: 80 80 80

Sanding Sleeves Model No. SEE BELOW

Sanding Belts Model No. SEE BELOW Model No:

Disc Size: Ø125mm Ø150mm Ø230mm

Headlight Restoration Kit Model No. HRK01

Contents:

For our full range of Air Belt Sanders, see page 728

Disc Size:

Grit:

Type:

Before

1154 Buffing & Polishing Heads

Buffing & Polishing Foam Cone - Orange/Firm Model No. PTCCHC85O

and

other leading brands of mini polishers. Size: Thread Size:

Ø150 x 50mm Buffing & Polishing Foam Heads Model No. SEE BELOW Yellow Foam - Coarse foam with open cell for aggressive jobs. Ideal for LV paint.

Model No:

Size:

Thread:

Colour/Type:

Ø150mm Buffing & Polishing Foam Heads Model No. SEE BELOW See page 1156 for Model No:

Type:

Size:

Thread:

Hook & Loop Buffing & Polishing Foam Heads Model No. SEE BELOW Hook & Loop Compounding/Buffing and Polishing Foam Heads Model No. SEE BELOW

Yellow Foam - Coarse foam with open cell for aggressive jobs. Ideal for LV paint.

Model No: Model No:

Size:

Colour/Type:

Size:

Colour/Type:

Polishing Heads & Backing Pads 1155

Hook-and-Loop Backing Pads Model No. SEE BELOW Hook-and-Loop Backing Pads Model No. SEE BELOW Hook-and-loop faced pads suitable for use with hook-and-loop Model No: PTCBPV3 PTCBPV4 PTCBPV3S PTCBPV4S

Type:

Pad Size:

Thread:

Model No: PTC50VA PTC50VA516 PTC50VAM6 PTC75VA PTC75VA516 PTC75VAM6 PTC75VM10 PTC75HLM

Pad Size:

Thread:

Ø75mm Hook-and-Loop Accessories Model No. SEE BELOW Polishing Mop

PTCPM75

Size:

PTCMC75

Size:

Ø145mm 5/16"UNF DA Dust-Free Backing Pad for Hook-and-Loop Discs Model No. PTC150DFV 5/16"UNF DA Backing Pads Model No. SEE BELOW Model No: PTC115VA516 PTC/150SA

Pad Size:

Pad Size: Thread Size: Suitability:

Thread:

Suitability:

Model No: Pad Size: AK289 AK290 PTC150MH

Stick-on (Soft)

PTC/150VA

Universal DA Dust-Free Backing Pads Model No. SEE BELOW Thread:

Suitability:

Max Speed:

Shaft Size:

Ø160mm Backing Pad for Tie Cord Polishing Bonnet - M14 x 2mm Model No. PTC180BP

Pad Size: Thread Size:

Hook-and-Loop Backing Pads - M14 Model No. SEE BELOW Model No: PTC/150VA/M14 PTC/180VA

Pad Size:

Ø180mm Tie Cord Polishing Bonnet Model No. ER/MS/66 Thread:

100% pure new wool pile to obtain a professional deep

Polishing Balls Model No. SEE BELOW

Model No: PTCPB75 PTCPB100 PTCPB125

For For our allfull of our range latest of Electric products Sanders and promotions & Polishers, visit see www.sealey.co.uk pages 760 to 762

Size:

1156 Car Body Care & Paint Brushes

500ml Super Polymer Polish Model No. SCS702

500ml Fine Cutting Compound Model No. SCS700

500ml Medium Cutting Compound Model No. SCS701

Fine cutting compound will help to restore gloss and remove moderate swirl marks

Medium cutting compound will help to restore gloss and remove moderate swirl

drying out or generating a large amount of polishing dust.

without drying out or generating a large amount of polishing dust.

use.

Size:

500ml

24pc Plastic Handled Touch-Up Paint Brush Assortment Model No. PB1 Length: Quantity:

Super polymer polish helps to protect and restore gloss paintwork. For use with dual action and rotary polishers. Contains

500ml Rust Remover Model No. SCS201 and machinery.

500ml

Size:

500ml

10pc Wooden Handled Touch-Up Paint Brush Assortment Model No. PB2 24

Length: Quantity:

3pc Pure Bristle Paint Brush Set Model No. SPBS3

9pc Pure Bristle Paint Brush Set Model No. SPBS9

Painted composite handles.

Size (Metric): Size (Imperial): Quantity:

Pure Bristle Paint Brushes - Packs of 10 Model No. SEE BELOW chrome ferrules. Painted composite handles. Model No:

Size Metric:

Size Imperial:

Qty:

Trim Clips 1157 Trim Clips A comprehensive new range of panel, trim and moulding clips suitable for a wide variety of popular vehicles. All clips are supplied in convenient resealable bags of 20 clips or assortment boxes denoting their application. See www.sealey.co.uk for a full listing of applications.

Plastic Riveting Kit Model No. RT001 Suitable for applying plastic rivets found mainly in automotive applications. Designed for one-handed operation and one-stroke setting. Allows access in hard to reach areas not accessible by conventional lever type tools. Universal nose piece suitable for all sizes of plastic rivets. Supplied with four packs of plastic rivets. Rivets:

Ø5 x 15.8, Ø5 x 17.2, Ø6.3 x 25.2, Ø6.6 x 17.2mm (10 of each)

Audi & VW

Model No. TCPR1614VW

Audi, BMW & VW

Model No. TCPR1013

Audi, Seat & VW

Audi & VW

Model No. TCPR2020VW

BMW

Model No. TCPR2018BMW

BMW, Chrysler Ford & GM

BMW & GM

Model No. TCPR1515

Tools designed to simplify trim and trim stud removal. Manufactured from resilient nylon to minimise panel damage and marking.

Audi & VW

Model No. TCPC2020VW

Model No. TCPC2525

5pc Trim & Upholstery Tool Set Model No. RT/KIT

Model No. TCFT1830

BMW & Renault

Model No. TCPC1820

Trim Clips Model No. SEE BELOW Assortment of the most common body trim clips found on the listed vehicles. Supplied in bags of 20. Model No:

Type: Push Rivet, Ø16mm x 14mm Panel Clip, Ø20mm x 20mm Push Rivet, Ø10mm x 13mm Panel Clip, Ø25mm x 25mm Push Rivet, Ø20mm x 20mm

Applications: Audi & VW Audi & VW Audi, BMW & VW Audi & VW Audi, Seat & VW

Model No:

Type: Applications: Push Rivet, Bumper, Ø20mm x 18mm BMW Push Rivet, Ø15mm x 15mm BMW & GM Fir Tree Clip, Ø18mm x 30mm BMW, Chrysler, Ford, GM Panel Clip, Door Trim, Ø18mm x 20mm BMW & Renault

For our full range of Trim Tools, see pages 600 to 601

1158 Trim Clips

Citroen & Peugeot

BMW & VW

Model No. TCPR0813

Model No. TCPC2018

Model No. TCPR2015C

Citroen, Fiat & Peugeot

Citroen

Model No. TCRC1210

Model No. TCMC1413

Citroen, Ford, GM & Peugeot

Model No. TCMC2018

Ford

Model No. TCPC2025

Model No. TCFT1820

Ford

Model No. TCSR1525

Model No. TCPR2012

Ford & GM

Ford

Model No. TCSR1520

Ford, Hyundai, Kia & Mazda

Model No. TCSR1815

Citroen

Model No. TCLN0508

Ford, Kia, Mazda & Nissan

Model No. TCSR2023

Model No. TCBT3525U

Trim Clips Model No. SEE BELOW Assortment of the most common body trim clips found on the listed vehicles. Supplied in bags of 20. Model No:

Type: Applications: Push Rivet, Ø8mm x 13mm BMW & VW Panel Clip, Ø20mm x 18mm Citroen & Peugeot Push Rivet, Bumper, Ø20mm x 15mm Citroen Side Moulding Clip, Ø14mm x 13mm Citroen Retaining Clip, Ø12mm x 10mm Citroen Moulding Clip, 20mm x 16mm Citroen, Fiat & Peugeot Fir Tree Clip, Ø18mm x 20mm Citroen, Ford, GM, Peugeot Panel Clip, Ø20mm x 25mm Ford

Model No:

Type: Applications: Push Rivet, Ø20mm x 12mm Ford Screw Rivet, Bumper, Ø15mm x 25mm Ford Screw Rivet, Ø15mm x 20mm Ford Locking Nut Ø15mm x 10mm Ford & GM Screw Rivet, Ø18mm x 15mm Ford, Hyundai, Kia & Madza Screw Rivet, Ø20mm x 23mm Ford, Kia, Mazda & Nissan Push-in Bumper Fixing Rivet, Ø35mm x 25mm GM

Trim Clips 1159

Model No. TCPC1718

Model No. TCFT1418

Model No. TCBC1522

Model No. TCPR1614

Model No. TCPR2020GM

Model No. TCPR1614GM

Model No. TCPC2016

Model No. TCSR1514

Honda & Suzuki

Model No. TCFT1823

Honda, Mitsubishi & Toyota

Honda & Toyota

Model No. TCPR1820

Hyundai

Model No. TCWS1515

GM, Nissan & Renault

GM & Honda

Model No. TCPR2015J

Hyundai, Suzuki & Toyota

Model No. TCPC2020

Japanese

Hyundai

Model No. TCWS1414

Model No. TCSR2015J

Trim Clips Model No. SEE BELOW Assortment of the most common body trim clips found on the listed vehicles. Supplied in bags of 20. Model No:

Type: Applications: Panel Clip, Ø17mm x 18mm GM Fir Tree Clip, Carpet/Trim, Ø14mm 18mm GM Push-in Bumper Fixing Rivet, Ø15mm x 22mm GM Push Rivet, Ø16mm x 14mm GM Push Rivet, Ø20mm x 20mm GM Push Rivet, Ø14mm x 16mm GM Screw Rivet, Ø15mm x 14mm GM & Honda Panel/Moulding Clip, Ø20mm x 16mm GM, Nissan & Renault

Model No:

Type: Fir Tree Clip, Ø18mm x 23mm Push Rivet, Ø20mm x 15mm Push Rivet, Ø18mm x 20mm Panel Clip, Ø20mm x 20mm Weatherstrip Clip, 15mm x 15mm Weatherstrip Clip, 14mm x 14mm Screw Rivet, Ø20mm x 15mm

For our full range of Trim Tools, see pages 600 to 601

Applications: Honda, Suzuki Honda & Toyota Honda, Mitsubishi & Toyota Hyundai, Suzuki & Toyota Hyundai Hyundai Japanese

1160 Trim Clips

Kia & Hyundai

Model No. TCPC1320

Model No. TCPC1815

Model No. TCPR1520

Model No. TCPR2016

Model No. TCMC2018G

Model No. TCFT1820P

Peugeot

Model No. TCMC2018W

Renault

Peugeot

Model No. TCMC2016

Nissan

Peugeot

& Toyota

Model No. TCMC1820

Model No. TCBC2018R

Toyota & Lexus

Toyota

Model No. TCLN1812

Model No. TCSR2012

Mercedes

Model No. TCLN2510

Mazda

Land Rover

Toyota

Model No. TCPR3017

Model No. TCLN2020

Trim Clips Model No. SEE BELOW Assortment of the most common body trim clips found on the listed vehicles. Supplied in bags of 20. Model No:

Type: Panel Clip, Ø18mm x 15mm Panel Clip, Ø13mm x 20mm, Door Panel Screw Rivet, Ø20mm x 12mm Locking Nut, Ø25mm x 10mm Push Rivet, Ø15mm x 20mm Push Rivet, Ø20mm x 16mm Fir Tree Clip, Ø18mm x 20mm Moulding Clip, Ø20mm x 18mm

Applications: Kia & Hyundai Land Rover Mazda Mercedes Mercedes Nissan Peugeot Peugeot

Model No:

Type: Applications: Moulding Clip, Ø20mm x 18mm Peugeot Moulding Clip, 20mm x 16mm Peugeot Push-in Bumper/Radiator Fixing, Ø20mm x 18mm Renault Side Moulding Clip, Ø18mm x 20mm Suzuki & Toyota Locking Nut, Ø18mm x 12mm Toyota Locking Nut, Ø20mm x 20mm Toyota & Lexus Push Rivet, Ø30mm x 17mm Toyota

Trim Clips 1161

Model No. TCPC1820VW

Model No. TCWS1213

Model No. TCSR1813

Model No. TCMC1820VW

Model No. TCLN1520G

Model No. TCWS1810

Universal

Volvo

Model No. TCLN1520B

Universal

Model No. TCLN1612U

VAG

Model No. TCWS1512

Model No. TCPC2230VW

Model No. TCPR1518

Model No. TCLN0810

Toyota

Universal

Model No. TCLN2020U

Universal

Model No. TCMC1805U

Universal

Model No. TCMC2222U

Trim Clips Model No. SEE BELOW Assortment of the most common body trim clips found on the listed vehicles. Supplied in bags of 20. Model No:

Type: Screw Rivet, Ø18mm x 13mm Weatherstrip Clip, Ø12mm x 13mm Panel Clip, Ø18mm x 20mm Insert Locking Nut, Ø8mm x 10mm Locking Nut, Ø15mm x 20mm Side Moulding Clip/Grommet, Ø18mm x 20mm Weatherstip Clip, 18mm x 10mm Panel Clip, Ø22mm x 30mm

Applications: Toyota Toyota VW VW VW VW VW VW

Model No:

Type: Weatherstrip Clip, 15mm x 12mm Push Rivet, Ø15mm x 18mm Locking Nut, Ø15mm x 20mm Locking Nut, Ø20 mm x 20mm Captive Nut, Ø16mm x 12mm Side Moulding Clip, 18mm x 5mm Side Moulding Clip, Ø22mm x 22mm

For our full range of Trim Tools, see pages 600 to 601

Applications: VAG Volvo Universal Universal Universal Universal Universal

1162 Trim Clips

Model No. TCDC1820U

Model No. TCLN1010U

Model No. TCLN1515U

Model No. TCLN1520U

Model No. TCPC1820B

Model No. TCPC1820U

Model No. TCPC1822U

Model No. TCPC2020U

Model No. TCPC2530U

Model No. TCPR1014U

Model No. TCPR1518U

Model No. TCPR1730U

Model No. TCPR2015

Model No. TCRC1510U

Model No. TCRC2018

Trim Clips Model No. SEE BELOW Assortment of the most common body trim clips found on the listed vehicles. Supplied in bags of 20. Model No:

Type: Panel Clip, Door Trim, Ø18mm x 20mm Locking Nut, Ø10mm x 10mm Locking Nut, Ø15mm x 15mm Locking Nut, Ø15mm x 20mm Panel Clip, Door Trim, Ø18mm x 20mm Panel Clip, Ø18mm x 20mm Panel Clip, Door Trim, Ø18mm x 22mm Panel Clip, Door Trim, Ø 20mm x 20mm

Applications: Universal Universal Universal Universal Universal Universal Universal Universal

Model No:

Type: Panel Clip, Ø25mm x 30mm, Interior with Sealer Push Rivet, Ø10mm x 14mm Push Rivet, Ø15mm x 18mm, 6.3mm Hole Push Rivet, Ø17mm x 30mm Push Rivet, Ø20mm x 15mm Retaining Clip, 15mm x 10mm Retaining Clip, 20mm x 18mm

Applications: Universal Universal Universal Universal Universal Universal Universal

Trim Clips 1163

Universal

Model No. TCPR2015U

Model No. TCPN1520U

Model No. TCBT2515U

Universal

Model No. TCFT2420U

Model No. TCBT3020U

Model No. TCFT24207U

Model No. TCBC2018U

Universal

Model No. TCFT1823U

Universal

Model No. TCFT2018U

Model No. TCFT2022U

Universal

Model No. TCSR1525U

Model No. TCPR1015

Universal

Model No. TCBT2528U

Universal

Model No. TCSR1712U

Universal

Model No. TCSR1825U

Trim Clips Model No. SEE BELOW Assortment of the most common body trim clips found on the listed vehicles. Supplied in bags of 20. Model No:

Type: Applications: Locking Nut, Ø15mm x 20mm Universal Push Rivet, Ø20mm x 15mm Universal Push Rivet, Ø10mm x 15mm Universal Under Bonnet Insulation Fixing Clip, Ø25mm x 28mm Universal Under Bonnet Insulation Fixing Clip, Ø25mm x 15mm Universal Under Bonnet Insulation Fixing Clip, Ø30mm x 20mm Universal Fir Tree Clip, Ø18mm x 30mm, 7.2mm Hole Universal Fir Tree Clip, Ø24mm x 20mm, 7.0-7.4mm Hole Universal

Model No:

Type: Fir Tree Clip, Ø18mm x 23mm Push-in Bumper Fixing Rivet, Ø20mm x 18mm Fir Tree Clip, Ø20mm x 22mm Fir Tree Clip, Ø20mm x 18mm Screw Rivet, Ø15mm x 25mm Screw Rivet, Ø17mm x 12mm Screw Rivet, Ø18mm x 25mm

For our full range of Trim Tools, see pages 600 to 601

Applications: Universal Universal Universal Universal Universal Universal Universal

1164 Trim Clip & Rivet Assortments

Audi

Model No. BTC01

Mercedes

Model No. BTC02

Model No. BTC03

Peugeot

Renault

Model No. BTC04

Model No. BTC05

Model No. BTC06

Honda

Model No. BTC07

Model No. BTC09

All Trim Clip & Rivet Assortments include a map of the contents in the lid.

Trim Clip & Rivet Assortments Model No. SEE BELOW Assortments of the most common body trim clips found on the listed vehicles. Supplied in partitioned box. Model No:

Type: Trim Clip Trim Clip Trim Clip Trim Clip Trim Clip Trim Clip Trim Clip Trim Clip Trim Clip Trim Clip

Applications: Audi BMW Mercedes VW Renault Peugeot & Citroen Fiat Honda Mazda Mitsubishi

No. of Pieces: 160pc 290pc 270pc 255pc 300pc 345pc 308pc 418pc 475pc 370pc

Model No:

Type: Trim Clip Trim Clip Trim Clip Trim Clip Trim Clip Trim Clip Rivet Trim Clip Trim Clip Fir Tree Clips

Applications: Nissan Toyota/Lexus Vauxhall/Opel GM, Chrysler & Ford Toyota Honda GM, Ford, Chrysler & VW Nissan GM Ford, GM, Honda, Peugeot, Suzuki & Universal

No. of Pieces: 408pc 360pc 300pc 168pc 146pc 121pc 115pc 123pc 90pc 100pc

Trim Clip & Rivet Assortments 1165

Mazda

Model No. BTC10

Mitsubishi

Model No. BTC11

Toyota & Lexus

Model No. BTC13

GM, Chrysler & Ford

Vauxhall/Opel

Toyota

Model No. BTC16

Honda

Model No. BTC18

Nissan

Model No. BTC20

Model No. BTC12

Model No. BTC14

Model No. BTC17

Nissan

Model No. BTC19

Model No. BTC21

Model No. TCFT100AS

For our full range of Trim Tools, see pages 600 to 601

GM, Ford, Chrysler & VW

Ford, GM, Honda, Peugeot, Suzuki & Universal

1166 Paper Rolls & Wipes

Plain White Toilet Roll Pack of 4 x 9 (36 Rolls) Model No. TOL36 Embossed 2-ply soft toilet roll, wrapped in sleeves of four. Ply: Type: Width: Sheets on Roll: Sleeve Quantity: Pack Quantity:

2 Embossed 95mm 320 4 Rolls 36 Rolls

150m White Embossed 2-Ply Paper Roll - Pack of 6 Model No. WHT150

150m Blue Embossed 2-Ply Paper Roll - Pack of 6 Model No. BLU150

perforated roll wipes.

roll wipes.

Ply: Type: Width: Length: Pack Quantity:

2 Embossed 175mm 150m 6 Rolls

Ply: Type: Width: Length: Pack Quantity:

2 Embossed 190mm 150m 6 Rolls

act shot 73gsm Multipurpose Paper Wipes in Dispenser Box Smooth White - 150 Sheets Model No. SCP1501

69gsm Multipurpose Paper Wipes in Dispenser Box Creped Turquoise - 160 Sheets Model No. SCP1601

Strong, durable and tear resistant. Absorbs liquids fast and up to four times its own mass. Rinse and re-use over and again. Low-linting. Solvent and chemical resistant. Use both wet and dry.

Strong, durable and tear resistant. Absorbs liquid up to four times its own mass. Rinse and re-use over and again. Low-linting. Solvent and chemical resistant. Use both wet and

Sheets Per Pack: Weight:

150 73gsm

69gsm Multipurpose Paper Wipes in Polyflute Dispenser Box Creped Turquoise - 160 Sheets Model No. SCP160

75gsm Multipurpose Paper Wipe in Polyflute Dispenser Box Smooth White - 150 Sheets Model No. SCP150

protect the cloth and ensure controlled usage.

Sheets Per Pack: Weight:

160 69gsm

Sheets Per Pack: Weight:

160 69gsm

150 75gsm

Hand Cleaning & Repair Kits 1167

Heavy-Duty Hand Wipes Textured Pack of 80 Model No. SSW80

Extra Strength Hand Wipes Beaded Pack of 80 Model No. SSW80B

Durable, extra large wipes for removing a variety of tough substances including oil and grease. Moisture locked wipes means no need for water. Supplied in 3ltr dispensing bucket.

Heavy-duty textured hand wipes. Ideal for removing dirt, oil, grease, grime and non-cured petroleum based contaminants. Antimicrobial properties leave hands hygienically clean.

Quantity:

Extra strength beaded hand wipes. Ideal for removing dirt, oil, grease, grime and non-cured petroleum based contaminants. Beaded side gives mechanical action for rapid cleaning, reverse side is smooth. Antimicrobial properties leaves hands hygienically clean.

Hand Wipes Bucket Smooth - Pack of 150 Model No. SCW3

150

Hand Cleaner Lemon Zing Model No. SEE BELOW dirt and other ground-in soils. Based on natural citrus extracts, contains perlite particles for deep cleaning and lanolin helps to prevent chapped and dry hands. Solvent-free, contains Aloe Vera with antibacterial properties for cuts and grazes. Ideal for use in garages, workshops, factories and engineering shops. Model No SHC500 is supplied in 500ml screw top tub and Model No SHC5L in 5ltr container with dispensing pump. Model No:

Size: 500ml 5ltr

Heavy-Duty Hand Cleaner 5ltr Orange Gel Model No. SHCO5L grease, dirt and other ground-in soils. Based on natural citrus extracts, contains perlite particles for deep cleaning and lanolin to moisturise and help prevent chapped and dry hands. Solvent-free, contains Aloe Vera with antibacterial properties for cuts and grazes. Ideal for use in garages, workshops, factories and engineering shops. Supplied in 5ltr container with dispensing pump. Size:

5ltr

Quantity:

Windscreen Repair Kit Model No. SCS901 Simple step-by-step process and a 30 minute curing time. Pressurising applicator penetrates deep inside chips and cracks to give an almost invisible repair. Tough resin formula costly windscreen replacement. Suitable for screen chips up to 25mm diameter and cracks up to 300mm long. Curing process can be sped up by using a UV lamp (not included). Push Pin, Clean Cloth, Adhesive Seal (x3), Injector, Curing Film (x5)

Fast-Fix Filler & Adhesives Model No. SEE BELOW Two part (adhesive and filler powder) repair system with unique reinforcing and be repaired so that the damaged area is designed to bond rubber, copper, steel and aluminium, as well as most plastics.

Alloy Wheel Repair Kit Model No. SCS903 Permanently repairs kerb damage, scratches, slight dents and sanding marks on alloy, composite and steel rims as well as hubcaps. Kit includes everything required to repair damage simply and quickly.

For all of our latest products and promotions visit www.sealey.co.uk

Clear Black Grey White

1168 Car Protection & Additives

5-in-1 Disposable Car Interior Protection Kit Display - Box of 50 Model No. CCSET550 Universal Disposable Car Covers Model No. SEE BELOW

Model No: Size: Dimensions (W x D):

TDCCM

TDCCL

Contents: Floor Mat - 80g + PE 15g: Seat Cover - 13 micron: Steering Wheel Cover - 20 micron: Gear Lever Cover - 20 micron: Hand Brake Cover - 20 micron: Pack Quantity:

DPF & Catalyst Cleaner Model No. DPFCA400

Diesel Particulate Filter Cleaner Model No. DPFPC375

Size:

Fuel System Cleaner - Petrol Engines Model No. FSCP300

Oil System Cleaner - Petrol & Diesel Engines Model No. OSCL300

Size:

Fuel System Cleaner - Diesel Engines Model No. FSCD300

Size:

Oxygen Sensor Catalytic Converter Cleaner Model No. CCOS300

Size:

Pressure Sprayers 1169

Premium Pressure Solvent Sprayers with Viton® Seals Model No. SEE BELOW

Pressure Solvent Sprayers with Viton® Seals Model No. SEE BELOW

Model No:

Capacity: 1ltr 1.5ltr

mechanical, heat and chemical work well with Acids, Oils, Ozone, Fuels and Alkaline,

Capacity: 1ltr 1.5ltr

Viton® Seal Kit for SCSG02 & SCSG03 Model No. SCSGRK

Viton® Seal Kit for SCSG04 & SCSG05 Model No. SCSGPRK

Viton® seal kit for Model No's SCSG02 and SCSG03

Viton® seal kit for Model No's SCSG04 and SCSG05

Premier Pressure Industrial Foam Sprayer Model No. SCSG08

Premier Pressure Industrial Detergent Sprayer Model No. SCSG07

Premier Pressure Industrial HC Sprayer with Viton® Seals Model No. SCSG06

Working Capacity: Total Capacity:

Model No:

1ltr 1.5ltr

Working Capacity: Total Capacity:

1ltr 1.5ltr

Working Capacity: Total Capacity:

For our full range of Detergents, see pages 1170 to 1171

0.75ltr 1.5ltr

1170 Cleaning Products Concentrated General Purpose TFR Detergent with Wax Model No. SEE BELOW General purpose concentrated TFR. Formulated with a

Model No:

Size: 5ltr 25ltr

Concentrated Premium TFR Detergent with Wax Model No. SEE BELOW

Model No:

Size: 5ltr 25ltr

5ltr Car Shampoo with Wax Model No. SCS005

5ltr Premium Car Shampoo with Wax Model No. SCS006

5ltr Patio Cleaner Model No. SCS007

Car shampoo with added shine enhancer and paint protector. Size:

5ltr Size:

5ltr

Size:

Large Sponge Model No. CC64

14ltr Composite Bucket Model No. BM16

1.7m Large Angled Flo-Thru Brush with Telescopic Handle Model No. CC50 Handle Extension: Replacement Flo-Thru Brush Head:

5ltr

Shot Blasting & Chemicals 1171

Carpet/Upholstery Detergent Model No. SEE BELOW

Shot Blasting Sand - Pack of 6 Model No. SG10/SAND6

We recommend only Sealey cleaning products be used with our valeting equipment. These chemical agents are specially formulated for use in Sealey valeting systems and provide powerful, non-corrosive cleaning power.

Suitable for Sealey and other recirculating shot blasters. Complies with COSHH SI-1657-1988. Not suitable for use in shot blasting cabinets.

Model No: VMR921S VMR921 VMR925S VMR925

Size: 1ltr 1ltr 5ltr 5ltr

Pack Quantity: 1 10 1 4

Parts Cleaning Brush with Hose Model No. SM201 (except Model No. SM21). To use with Model No. SM40 order Model No. SM201/A.

Parts Cleaning Brush Model No. BAPC/1 Double end cleaning brush with solvent resistant bristles. Length:

300mm

Weight: Container:

6 x 700g Bottle

Shot Blasting Grit Model No. SEE BELOW Suitable for workshop, hand-held and recirculating shot blasters and complies with COSHH SI-1657-1988. Not suitable for use in shot blasting cabinets. Model No: B/25KG BGT25KG

Weight: 25kg 25kg

Size: 200-700microns 200-700microns

Container: Bag Tub

Shot Blasting Beads - Glass Model No. SEE BELOW Beads suitable for use in shot blasting cabinets. Model No: B5KG GB25KG

Weight: 5kg 25kg

Size: 180-300microns 180-300microns

Container: Tub Tub

25kg Blasting Soda - Bag Model No. SBG25KG Soda will not etch glass and will not warp or remove metalwork. Leaves a rust inhibitor behind for up to six weeks. Weight:

25kg

Emulsifiable Degreasing Solvent Model No. SEE BELOW

Degreasing Solvent Model No. SEE BELOW Degreasing solvent suitable for use in Sealey and other leading makes of parts cleaning tank. Supplied in a 20ltr or 25ltr container.

enable it to form an emulsion with water, aiding cleaning of solvent from workpiece. Also suitable for engine cleaning.

Model No:

Size: 25ltr 20ltr

For our full range of Parts Cleaners & Shot Blasters, see pages 308 to 313

Size: 5ltr 25ltr