Official
Publication
&
of
The
M
Australasian
A
T
Corrosion
E
Association
R
I
Inc
•
www.corrosion.com.au
A
L
S
Vol 39 No 4, August 2014 ISSN 1326 -1932
C&P
20I4 ISSUE
Inside this Issue: Corrosion & Prevention 2014: Final Program Corrosion & Prevention 2014: Sponsors & Exhibitors Project Profile: Use of Non-intrusive Inspection in Onshore Gas Facilities: A Pilot Study University Profile: The University of Auckland, New Zealand Technical Note: Non-Intrusive Inspection (NII) – An effective NII Process Professional Practice Paper: Inorganic Zinc Silicate Coatings: Fallacies and Facts
CONTENTS
Corrosion & Materials Corrosion & Materials is the official publication of The Australasian Corrosion Association Inc (ACA). Published bi-monthly, Corrosion & Materials has a distribution of 2,500 to ACA members and other interested parties. Each issue features a range of news, information, articles, profiles and peer reviewed technical papers. Corrosion & Materials publishes original, previously unpublished papers under the categories ‘Research’ and ‘Professional Practice’. All papers are peer reviewed by at least two anonymous referees prior to publication and qualify for inclusion in the list which an author and his or her institution can submit for the ARC ‘Excellence in Research Australia’ list of recognised research publications. Please refer to the Author Guidelines at www.corrosion.com.au before you submit a paper to Brendan Pejkovic at bpejkovic@corrosion.com.au with a copy to bruce.hinton@monash.edu ACA also welcomes short articles (technical notes, practical pieces, project profiles, etc.) between 500 – 1,500 words with high resolution photos for editorial review. Please refer to the Article Guidelines at www.corrosion.com.au before you submit a short article to Brendan Pejkovic at bpejkovic@corrosion.com.au The Australasian Corrosion Association Inc The Australasian Corrosion Association Inc (ACA) is a non-profit membership based organisation akin to a ‘learned society’. The ACA was established in 1955 to service the needs of Australian and New Zealand companies, organisations and individuals involved in the fight against corrosion. It is dedicated to ensuring all aspects of corrosion are responsibly managed, protecting the environment and ensuring public safety. ACA members are drawn from a wide cross section of industries united by their common interest – to reduce the impact of corrosion in Australasia.
Front Cover Photo: Dulux Protective Coatings chosen to protect Regis Resources Garden Well CIL tanks in WA. Photo courtesy Dulux Protective Coatings.
Vision Statement Leaders throughout Australasia in disseminating knowledge to enable best practice in corrosion management, thereby ensuring the environment is protected, public safety enhanced and economies improved.
&
M
A
T
E
R
I
A
L
S
ISSN 1326 -1932 Published by The Australasian Corrosion Association Inc. ABN: 66 214 557 257 Editor Ian MacLeod – Western Australian Museum ian.macleod@museum.wa.gov.au Associate Editors Research: Bruce Hinton – Monash University bruce.hinton@monash.edu Professional Practice: Willie Mandeno – Opus International Consultants willie.mandeno@opus.co.nz News: Tracey Winn – The Australasian Corrosion Association Inc, twinn@corrosion.com.au Reviewers Andy Atrens – University of Queensland Nick Birbilis – Monash University Frederic Blin – AECOM Lex Edmond Harvey Flitt – Queensland University of Technology Maria Forsyth – Deakin University Rob Francis Warren Green – Vinsi Partners Graeme Kelly – Corrotec Services Grant McAdam – Defence Science & Technology Organisation David Nicholas – Nicholas Corrosion Graham Sussex – Sussex Material Solutions Tony Trueman – Defence Science & Technology Organisation Geoffrey Will – Queensland University of Technology David Young – University of New South Wales
Advertising Sales Tracey Winn – The Australasian Corrosion Association Inc, twinn@corrosion.com.au Ph: 61 3 9890 4833, Fax: 61 3 9890 7866 Subscriptions Print Version: ISSN 1326-1932 Subscription rates: Within Australia: AU$72.60, incl GST Outside Australia: AU$77, excl GST posted airmail The views expressed in Corrosion & Materials are those of the individual authors and are not necessarily those of the ACA. Publication of advertisements does not imply endorsement by the ACA. Copyright of all published materials is retained by the ACA but it may be quoted with due reference.
The ACA is a founder member of the World Corrosion Organization
ACA Branches & Divisions Auckland Division: Grant Chamberlain
64 21 245 9038
Newcastle: Nathan Spencer
61 439 511 836
New South Wales: Jim Galanos
61 2 9763 5611
Queensland: Cathy Sterling
61 7 3821 0202
South Australia: Dennis Richards
61 0 419 860 514
Tasmania: Grant Weatherburn
61 0 418 120 550
Taranaki Division: Ron Berry
64 27 671 2278
Victoria: John Tanti
61 3 9885 5305
Wellington Division: Monika Ko
64 4 978 6630
Western Australia: Phil Schmidli
61 4 5148 0090
The Australasian Corrosion Association Inc PO Box 112, Kerrimuir, Victoria 3129, Australia Ph: 61 3 9890 4833, Fax: 61 3 9890 7866 E-mail: aca@corrosion.com.au | Internet: www.corrosion.com.au
ACA Technical Groups Cathodic Protection: Bruce Ackland
61 3 9890 3096
Coatings: Matthew O'Keeffe
61 437 935 969
ACA Operations Board President: Andrew Hargrave
Concrete Structures & Buildings: Frédéric Blin
61 3 9653 8406
Mining Industry: Ted Riding
61 3 9314 0722
Executive Officer: Wesley Fawaz
Petroleum & Chemical Processing Industry: Fikry Barouky
61 402 684 165
Operations Chairman: Paul Vince
Research: TBA
Senior Vice President: Mohammad Ali
Water & Water Teatment: Matthew Dafter
Junior Vice President: John Duncan
Young Corrosion Group: Dean Ferguson
Immediate Past President: Allan Sterling
* all the above information is accurate at the time of this issue going to press.
Directors: Kingsley Brown Graham Carlisle Matthew Dafter Peter Dove John Duncan Fred Salome Dean Wall
61 419 816 783 61 0 425 784 932
CONTENTS &
M
A
T
E
R
I
A
L
S
Vol 39 No 4, August 2014
4 | President’s Message 5 | ACA Events and Training 6 | Executive Officer’s Message 7 | Constitution Reform FAQ's 9 | News 18 | New Product Showcase 19 | ACA Standards Update 22 | Branch & YCG News
10
24 | Technical Event Review
Concrete Performance for Coastal Assets
26 | Technical Event Review
Corrosion in the Mining Industry
29 | Corrosion & Prevention 2014 Final Program
34 | Corrosion & Prevention 2014 Sponsors & Exhibitors
55
54 | Project Profile:
Use of Non-intrusive Inspection in Onshore Gas Facilities: A Pilot Study
56 | Coatings Group Member Profile 57 | University Profile:
The University of Auckland, New Zealand
58 | Technical Note:
Non-Intrusive Inspection (NII) – An effective NII Process
60 | Professional Practice Paper:
Inorganic Zinc Silicate Coatings: Fallacies and Facts
66 | Suppliers and Consultants
56
PRESIDENT’S MESSAGE
represents well over 2,000 members (Australia & New Zealand) and is the figurehead of The ACA for many partners across the corrosion world of industry.
(September) and I will be handing over the presidency to Mohammad Ali. My term as President is cut short slightly as the 2014 ACA conference is brought forward due to the approaching wet season in Darwin. The conference is usually held during November each year.
Since my last message I have attended The ACA Seminar Series in New Zealand, Hobart, Darwin and Perth. The road shows were well managed from our Melbourne team and I received good queries and feedback from members with regards to the ACA. Also they provided me with more opportunities to meet members. I also attended the Hobart road show and that was a real success and boost for my local Branch.
During my term I have seen many positive changes that have improved the way The ACA goes about its operations. To name just a few they are; 1. 2012 and 2013 audited accounts which have lead to real transparency of our finances
The next few months are looking busy as the lead up to the Darwin conference is approaching. All exhibition spaces are booked, there are over 90 technical papers and with Darwin offering a relaxed and warm environment, I encourage as many members as possible to register and attend the conference.
2. Governance Review Committee completing a review of the governance operations of the Association which has lead to a revision of our Constitution and Bylaws for member voting in September
Andrew Hargrave President
Welcome to all ACA members including our national and international partners to this edition of Corrosion & Materials. Sadly this will be my final President's message for 2014 as the Darwin conference is drawing closer
I would like to welcome Mohammad Ali in becoming the 2015 ACA President. He will be stepping into a more effective Association with a clearer and positive path for the future.
Thank you. Andrew Hargrave ACA President 2014
The President's role has been a privilege because it is a role that
GMA Garnet Abrasive ™
Quality range of blasting grades for your blast cleaning requirements. GMA PremiumBlastTM
INTERNATIONAL CORROSION CONTROL INC. INTERPROVINCIAL CORROSION CONTROL COMPANY LTD. Industry Leaders … since 1957
Rustrol® Cathodic Isolator ® effectively blocks the DC current needed for cathodic protection, while providing a grounding path for: • AC Fault Currents
Maintenance grade for tough jobs.
• Lightning Protection
GMA SpeedBlast
• Mitigation of Induced AC Voltages
General purpose abrasive.
• Power Switching Surge Currents
GMA NewSteel
Cathodic Isolator ® features electronic/electrical construction that responds instantly, protecting personnel and equipment against electrical shock hazards.
TM
TM
New steel, surface with light rust & thin coatings.
For more information, contact us at
08 9287 3250 or email sales@garnetsales.com
E-mail: Contact@Rustrol.com Central Fax: 905-333-4313 GMA GARNET GROUP when your abrasive matters!
www.garnetsales.com
GMA Garnet Group, Level 18, Exchange Plaza, The Esplanade, Perth, WA 6000
www.Rustrol.com
ACA EVENTS & TRAINING
Remaining ACA Events for 2014 Part of the role of the ACA is to organise events that bring together industry experts to present on new technologies, updates to standards, and share knowledge and experiences via case studies on a variety of projects. 2014 will be no different, with the events listed below scheduled in our Calendar of Events.
Event
2014 Date
Location
Corrosion & Prevention 2014 Conference
21-24 September
Darwin
Protective Coatings Preventing Corrosion
20 November
Brisbane
ACA members will receive further details on each event as appropriate throughout the year, but for now, please include these in your 2014 diary. For further information on these events for 2014 please don’t hesitate to contact Brendan Pejkovic (bpejkovic@corrosion.com.au) in the ACA office on +61 (0)3 9890 4833. Please refer to www.corrosion.com.au for up to date details on all ACA activities.
ACA 2014 Training Calendar Corrosion Technology Certificate
Cathodic Protection Monitoring
Mbr Status
Fee
GST
Total Fee
Mbr Status
Fee
GST
Total Fee
AU Mbr
$2018.18
$201.82
$2220.00
AU Mbr
$1704.55
$170.45
$1875.00
AU Non Mbr
$2363.64
$236.36
$2600.00
AU Non Mbr
$1868.18
$186.82
$2055.00
NZ Mbr* Brisbane
$2020.00
NZ Non Mbr
November
$2370.00 10th - 14th
Introduction to Protective Coatings
NZ Mbr* Sydney
$1685.00
NZ Non Mbr
October
$1865.00 28th - 30th
Cathodic Protection Advanced
Mbr Status
Fee
GST
Total Fee
Mbr Status
Fee
GST
Total Fee
AU Mbr
$550.00
$55.00
$605.00
AU Mbr
$2018.18
$201.82
$2220.00
AU Non Mbr
$672.73
$67.27
$740.00
$2363.64
$236.36
$2600.00
Darwin
September
AU Non Mbr NZ Mbr*
$2020.00
NZ Non Mbr
$2370.00
Sydney
October
11th
Protective Coatings Quality Control Mbr Status
Fee
GST
Total Fee
AU Mbr
$1350.00
$135.00
$1485.00
AU Non Mbr
$1645.45
$164.55
$1810.00
NZ Mbr*
$1350.00
NZ Non Mbr
$1650.00
Perth
December
8th - 10th
Coatings Selection and Specifications Mbr Status
Fee
GST
Total Fee
AU Mbr
$1350.00
$135.00
$1485.00
AU Non Mbr
$1645.45
$164.55
$1810.00
NZ Mbr*
$1350.00
NZ Non Mbr
$1650.00
New Zealand
October
13th - 15th
Coatings Inspection Refresher
13th - 17th
ACA/ACRA Corrosion & Protection of Concrete Structures
NACE - Coatings Inspection Program CIP Level 2 Mbr Status
Fee
GST
Total Fee
AU Mbr
$3400.00
$340.00
$3740.00
AU Non Mbr
$3886.36
$388.64
$4275.00
NZ Mbr*
$3395.00
NZ Non Mbr
$3900.00
Brisbane
September
15th - 20th
Melbourne
October/November
Oct. 27th Nov. 1st
Perth
December
1st - 6th
NACE – Peer Review CIP Level 3 Mbr Status
Fee
GST
Total Fee
AU Mbr
$1336.36
$133.64
$1470.00
AU Non Mbr
$1568.18
$156.82
$1725.00
NZ Mbr*
$1335.00
NZ Non Mbr
$1568.00
September
Mbr Status
Fee
GST
Total Fee
Darwin
AU Mbr
$963.64
$96.36
$1060.00
AU Non Mbr
$1209.09
$120.91
$1330.00
Resits NACE – Coating Inspector Program Level 1 & 2
NZ Mbr*
$965.00
NZ Non Mbr
$1210.00
Brisbane
November
27th - 28th
NACE - Coatings Inspection Program CIP Level 1 Mbr Status
Fee
GST
Total Fee
AU Mbr
$3400.00
$340.00
$3740.00
AU Non Mbr
$3886.36
$388.64
$4275.00
NZ Non Mbr
Mbr Status
Fee
GST
Total Fee
NZ Mbr*
$3395.00
AU Mbr
$550.00
$55.00
$605.00
Melbourne
October
AU Non Mbr
$672.73
$67.27
$740.00
Sydney
November
10th - 15th
NZ Mbr*
$500.00
NZ Non Mbr
$680.00
Perth
November
24th - 29th
Darwin
September
20th
New Zealand
November
28th
19th - 21st
Mbr Status
Fee
GST
Total Fee
AU Mbr
$909.09
$90.91
$1000.00
AU Non Mbr
$1145.45
$114.55
$1260.00
NZ Mbr*
$910.00
NZ Non Mbr
$1165.00
Examination Tests will be conducted to coincide with scheduled programs – contact ACA for details
All registration fees are payable in Australian Dollars.
$3900.00 20th - 25th
All registrations are subject to ACA’s published terms, conditions and policies. * All NZ courses are GST free
For up-to-date course scheduling, please refer to www.corrosion.com.au
August 2014 www.corrosion.com.au p.5
EXECUTIVE OFFICER’S MESSAGE
ACA Constitution Reform – Make your vote count members which led to a set of specific recommendations for changes that will underpin a modern governance structure of the Association. A revised Constitution and Bylaws to take the Association forward have been drafted and members are encouraged to vote on the new Constitution and Bylaws at the forthcoming General Meeting of the Members to be held in Darwin on Tuesday 23rd September 2014.
Wesley Fawaz Executive Officer
Members will probably be aware that The Australasian Corrosion Association Inc (ACA) has been reviewing its governance structures and processes. We have been served well by our Constitution over the years. However, the review that we commissioned from a governance consultant identified that there was a need for a modernisation of ACA’s Constitution to better reflect best practice in good governance. It is important that the Association positions itself for the future and has a structure that best serves its members for the next decade and beyond. Throughout this year, consultation has been undertaken with our
A vote of ‘Yes’ to the proposed Constitution and Bylaws will ensure that ACA continues to evolve as an Association that has best practice governance, which will underpin how we serve the interests of our members and the corrosion mitigation industry. Members have been provided the proposed Constitution and Bylaws which are available to read and consider on the ACA website homepage. A cover note from the ACA President along with the revised Constitution and Bylaws, the full list of Frequently Asked Questions and Proxy Form to vote on the Constitutional change can be found at www.corrosion.com.au. These documents are also supported by
a Frequently Asked Questions document (selection of FAQ’s on the next page). Members have also been provided a Proxy Form (also on the ACA website homepage) to ensure they exercise their vote, even if they are not able to attend the Meeting in Darwin. In completing and returning the proxy form by no later than 48 hours before commencement of the Meeting in Darwin (that is by 12pm AEST on Sunday 21st September 2014), you can nominate the Chair of the Meeting or alternatively a specific person who you know will be attending the Meeting in Darwin. The proxy form allows you to direct your proxy vote in a specific way – for the motion to adopt the new Constitution and Bylaws or against. I urge you all to vote in favour of the resolution. Under the current Constitution, a 75% majority of those voting is required to pass the resolution. Wesley Fawaz Executive Officer wesley.fawaz@corrosion.com.au.
Corrosion Monitoring Systems
p.6 CORROSION & MATERIALS
CONSTITUTION REFORM FAQ'S
Constitution Reform Frequently Asked Questions Q: Why do we have to have a new Constitution and Bylaws? A: The present Constitution has been developed piecemeal over a number of years, and its provisions are not in fact being followed in ACA’s current operations, nor does it comply in every respect with the South Australian Associations Incorporation Act 1985 under which ACA is registered. Q: What are the principal changes? A: Because there have been so few for so long, there are many changes. The 3 biggest changes are: urrently the Council is the ultimate C governing body, with representatives from each Branch and additional persons as defined in the Constitution so that its size exceeds 20 people, which meets only once per year. It is intended that a smaller Board whose members will all be required to act in the interests of all members will be elected as the ultimate governing body. This Board will meet at least 4 times per year. The present Constitution means that if something goes wrong, every Council member is potentially liable. The new Constitution will reduce this liability spread to the Board members. o ensure that the Board can contain T all the necessary skills, the elected Board members will be empowered to appoint up to two non-members as further Board members. o comply with the Act, the AGM T of the Association will not be able to be held in conjunction with the Annual Conference, unless the Annual Conference is moved to April-May or the balance date is moved from 31 December. (The Association has contravened this requirement for many years.) It is not proposed to change the balance date, so robust clauses are proposed in the Constitution about notice of meeting to be given to all members, and the capacity for proxy voting.
But many things remain unchanged. There is no change to the purposes and objects of the Association, nor to membership structure. Q: What are the consequences for the Branch structure? A: Very little. Anachronisms such as Branches being required to keep registers of their members, and requiring all payments to be made by cheque and receipted, have been excised. The scope for Branch Committees to operate as they see fit has been enhanced by moving many of the provisions from the Constitution (which in law must be obeyed by all Branches) to the Bylaws (which can be changed as required by the Board to suit circumstances). The Branches will still make nominations in the same way as before to the Council, which will then elect the Board. The Branches are the key platform by which ACA activities are promoted month by month across Australasia, and the changes should be designed to assist this, not restrain it. Q: How will the Board be elected? A: The Council will elect the Board. We want the best people we can get on the Board, and the Council will be required to take heed of a skills matrix of necessary capabilities to be shared between Board members. All members will be able to nominate/ second nominations for the Board. The Council in turn will be made up of nominees from each Branch, so that the membership has an indirect hand in the election process. There are limits on how many Board members can come from any Branch. In this way, we avoid the ability for big Branches to arrange bloc voting to take over small Branches. Q: Why do we need this new Board structure?
on merit, rather than geographical location, with the very best possible skill mix to drive a strategic board. Some of the recognised risks associated with the current structure which are minimised or removed in the new structure include: ranches being unable to find a suitable B person to serve on the Board. S uggestions that Board members should represent the interests of their state or territory at Board level rather than the interests of all members (as they are required to do under Corporate Law). Q: Hasn’t the role of President been downgraded? A: The role description has certainly been changed, most notably in that the President will not be a member of the Board. But the President will still lead and chair the Council, which will have power to elect the Board members, and to advise the Board on matters of importance to the membership. The President will also play a key figurehead role at the Annual Conference dinner. Q: Are there any changes that affect rights and responsibilities of current members? A: No, though some rights which (in contravention of the Act) were not spelt out in the current Constitution, such as the ability for a group of members to require a General Meeting to be called and a method for disputes resolution, are now spelt out. Q: Who should I contact if there is no longer a Board Member living in my Branch? A: The Board represents all members and as such you may contact any Board member or you may contact staff in the ACA Office. They will ensure that your query is directed to the right place.
Advice provided by experts in governance suggests that best practice in this area, is for a skills-based board who are elected
A cover note from the ACA President along with the revised Constitution and Bylaws, the full list of Frequently Asked Questions and Proxy Form to vote on the Constitutional change can be found at www.corrosion.com.au
August 2014 www.corrosion.com.au p.7
Maximise the Service Life of your Assets NEWS
Incospec and Associates can assist your company in protecting and maintaining your assets, ensuring that you are maximising service life for minimum lifecycle cost. Providing expertise in; > Protective Coating Consultancy > Metallurgy and Materials Consultancy > Welding Inspection and Supervision > Guardian: Asset Maintenance Management System Exhibiting this year at the ACA Corrosion and Prevention Conference at the Darwin Convention Centre on the 21-24 September 2014 at Booth 29.
NATA Accredited to AS/NZS ISO/IEC 17020 (2000) as a Type A Inspection Body (No. 15118) p.8  CORROSION & MATERIALS
For more information please contact; Toll Free Number: 1300 721 029 E-Mail: mail@incospec.com.au Website: www.incospec.com.au
NEWS
Mattioli Bros. thinking big! Australia's leading protective coating solutions experts have doubled the size of their head office and facilities with a new location and fully refurbished 1 hectare self-enclosed site to keep up with their exponential expansion and growth beyond 2014 .
and tighter, as the company's rate of growth has expanded, we decided it was time to pack up and bring our assets and services together under one roof so we can be smarter in how we deliver our integrated first class service to our customers."
Operations Manager Gianni Mattioli explained, "We have recognised in the last few years space has got tighter
The new site now allows Mattioli's to go above and beyond in providing protective coating solutions to their
diverse range of customers across the country. The new facilities now come with double the capacity and new service, allowing their customers to bring their materials onto Mattioli's new shop floor prior to site installation! The future's bright for this family business, one to watch over the coming months.
New Centre to capture emerging research area The new Australian Centre for Infrastructure Durability (ACID) will provide Australian industry with a national platform to connect with researchers in corrosion engineering and materials durability. Although the exact composition of the centre is yet to be announced, it will involve a number of leading universities and industrial partners. The centre, which will be officially launched in September 2014, will conduct research to address short and long-term corrosion problems confronting many industries in Australia. It will connect leading researchers with industry partners to explore new solutions and develop technology to benefit, support and grow local industry.
As a national centre encompassing several universities and organisations, ACID aims to deliver nationwide benefits by conducting research in five key strategic industries: Oil, gas and offshore Mining Transport, structures and buildings Defence and aerospace
learning strengths of its constituent universities to address these issues. ACID offers a number of new and exciting opportunities for infrastructure management and research and will also provide access to the unique laboratory testing facilities available at universities for use by industry. For more information contact Dr Timothy Khoo at Deakin University: timothy.khoo@deakin.edu.au
Water, wastewater and desalination Many problems associated with corrosion control in these industries are considerable and multidimensional, requiring a multipronged approach. ACID will capitalise on the research and
August 2014  www.corrosion.com.au  p.9
NEWS
NACE International Training Centre – Dubai A new training facility offers courses and certifications to meet demand in Middle East NACE International, The Corrosion Society, has announced the opening of its new NACE International Training Centre Dubai. Located in the Dubai International Academic City (DIAC), the facility will serve more than 1,000 students and professionals annually by providing training for individuals entering or advancing their career in the fast-growing field of corrosion control. NACE International’s Dubai facility will serve as the hub for the organization’s education programs in the Middle East and surrounding regions. “We decided
NACE International offers the world’s most specified technical training, education, and certifications to build the workforce needed to fight the pervasive global threat of corrosion.
to open a new training center in Dubai because there is tremendous demand for corrosion control professionals in the Middle East,” said NACE Chief Operating Officer, Matt Miller. “Traveling to the U.S. and other parts of the world for NACE training was inconvenient for many people in the region, so we came to them.”
More than 15,000 students receive corrosion control education and training annually from NACE International. The Dubai training facility is modeled after NACE International’s successful training center in Houston, Texas. Located 25 kilometers from the Dubai International Airport, the DIAC campus is conveniently accessible to those coming to the region from Asia, Africa and Europe.
New infrastructure development and aging infrastructure worldwide has increased the demand for qualified, trained corrosion professionals. Corrosion costs most nations 3-7% of GDP annually and it is estimated that as much as one-third of that cost is preventable with the application of existing corrosion control technologies.
Expressions of interest sought – coating inspectors Since its establishment in 1985, Corrotek has developed a reputation as a competent and ethical specialist protective coating consultancy. Recently, we’ve added a comprehensive analytical capability through our involvement with Maatek Pty Ltd. To serve existing clients, we intend to increase our coating inspection and corrosion survey capability across Australia and wish to speak to experienced and certified ACA, NACE, FROSIO or SSPC coating inspectors and ACA certified Corrosion Technicians or Technologists about potential collaboration opportunities. Interested individuals or organisations are invited to contact, in strict confidence, Corrotek’s principal, Mr Ian Glover by e-mail or mobile as per below.
®
C O N S U LTAN T S www.corrotek.com.au | Telephone 0415 872 994 | Email ian.glover@corrotek.com.au
p.10 CORROSION & MATERIALS
NEWS
Australian NACE instructor at the official opening of the new NACE Dubai Training Centre Justin Rigby of CIPS is a NACE CIP instructor who was successful during the recent round of instructor interviews held at the 2013 Brisbane Corrosion Conference. Following on from this Justin completed his NACE CIP Instructor traineeship during the first ever course held at the new NACE training centre in Dubai UAE on 15 June 2014. The first day of the course included the grand opening of the Centre with a ribbon cutting ceremony attended by NACE Area Director for West Asia & Africa, Abdallah Al-Ghamdi and NACE Chief Operating Officer Matthew Miller & Pam Nicoletti Director of Education. Now an apprentice instructor, Justin is scheduled to complete his
apprenticeship by instructing 4 CIP courses at NACE Training Centre Houston in August. We look forward to his return where upon he will be a valuable addition to the CIP education programs. Pictured here posing with the cut ribbon is Justin Rigby with Instructor Don Vickers of Vickers Inspection and Consulting, LLC.
August 2014  www.corrosion.com.au  p.11
NEWS
Early bird competition winner Andrew Caddy from Absafe was the lucky prize winner of the Early Bird Competition for the 2014 Corrosion & Prevention Conference & Exhibition in Darwin. By simply registering for the Early Bird rate he won prizes to the value of $3000 (AUS), consisting of: 2 return domestic economy flights,
nights’ accommodation at the Vibe 4 Hotel Waterside Darwin and ‘Cage of Death’ Experience at 1 Crocosaurus Cove Darwin, Northern Territory, Australia. Congratulations to Andrew we look forward to seeing you at C&P 2014.
Harnessing the power of the sun to make anodes Cathodic Anodes Australasia is proud to announce the commissioning of their new Solar Power System at their Anode Manufacturing Plant at Kunda Park in Queensland. CAA General Manager Ross Gorfine comments, “This is great news for us, we have been working towards this for the last few years. Reducing our reliance on fossil fuels, reducing our carbon footprint and decreasing our overall impact on the environment were key factors in our decision to go solar. In terms of cost, we did the maths and the economic benefits quickly became evident.”
clean solar energy. It is good to know that a large proportion of our anodes will be manufactured using the power of the sun.” “In terms of monitoring, the technology is quite amazing, it links straight into our online energy efficiency monitoring system, so we can review our energy inputs and outputs in real time. We would really like to thank Australian
Enviro Projects, who designed, supplied and installed the system. They did a great job.” “Energy consumption has been a major hurdle for us, we have spent a lot of time and money improving the efficiency of our key equipment. To have a state-of-the-art solar system as well is going to be an enormous benefit.”
“Some people say it is a progressive move, we saw it as an opportunity to do the right thing and it also makes good economic sense.” “As far as we know, we are the only Anode Manufacturing foundry in the southern hemisphere utilising
New coating for sprinklers Mechanical pipe joining systems specialist Victaulic has introduced a new sprinkler coating formulated to deliver excellent resistance to corrosion. Victaulic’s VC-250 is an alternative coating that ensures the continued performance of Victaulic FireLock sprinklers in a wide range of corrosive environments. The corrosion-resistant coating protects FireLock sprinklers from physical changes when exposed to extreme weather or areas that may be specified
p.12 CORROSION & MATERIALS
as chemical environments. The coating covers the sprinkler frame in a uniform thickness, reducing the equipment’s vulnerability to corrosion, while maintaining full functionality. Sprinklers with the optional VC-250 coating are recommended for use in water treatment, food manufacturing, ethanol production, and pickling stainless steel lines amongst various industrial applications. The VC-250 is both UL and FM approved as a corrosion resistant coating.
NEWS
Vale Enrico Piccioli 1948–2014 The hugely admired and charismatic innovator, engineering process pioneer, and respected business leader left us at the age of 65. His impact in the fields of reinforced plastic composites and corrosion protection has been profound, and his reputation has become legendary. Starting from the year 1973, when as a young 25 year old Doctor of Civil Engineering, he arrived from Italy, sponsored by the late, great Carlo Salteri AC to work for Transfield and to develop that company as the industry leader in reinforced composites and corrosion protection. The introduction of these materials and processes required both qualification and acceptance, and Enrico was instrumental in developing Australian Standard 2634 for FRP process equipment and was a working member of the Standards Association
of Australia (SAA) for the next 10 years to 1984, during which time he wore the epithet, ‘Father of the Reinforced Plastics Industry’, with great honour, pride and distinction. In 1997 he resigned from Transfield after a stellar career which took him all over the world establishing that company's successful brand. It was at this time that he founded his own company, EPTEC, and by selecting and attracting to it, outstanding and gifted personnel, and always, with the vision for the future a priority, he had, by example, entrepreneurship and diligence, inspired his succession to establish Version all of5 the necessary discipline and character to ensure its future. Eurostile Bold Eurostile Regular
EPTEC is now a leading company in the engineering sector in Australia. It is synonomous with signature corrosion protection and waterproofing projects such as the ANZAC Frigates, the NZDF Project PROTECTOR, on-going maintenance projects for the Australian Navy, contractor of choice for visiting United States Navy
ships, critical waterproofing services provider to the Burnley and Domain tunnels on the Melbourne CityLink, specialist waterproofing services on the Taiwan Republic of China High Speed Rail Project, and many other significant Defence, Civil and Marine infrastructure projects for Federal and State instrumentalities in Australia. All of Enrico's life was writ large, an immense canvas, which had at its heart, his beloved family, his business and the industries he serviced. His presence was massive, and for what he accomplished, and for what he has left, we are in awe. Enrico Evaristo Vito Maria Piccioli passed away on the 9 May 2014 in his 65th year and is survived by his adored Version 5 wife Terri and their beloved daughters, Eurostile Bold Cristina Eurostile Regular and Barbara. Charles Murray (Longtime friend, one time work colleague, and sometime collaborator in his anonymous interventions in the cause of social justice and disadvantaged humanity)
a division of valspar
Protective and Marine Coatings
High performance coating systems High performance coating systems
Version Version 5 5
SUPER GARNET
Eurostile Eurostile Bold Bold Eurostile Regular Eurostile Regular
Super Garnet is ISO 11126-10 Certified (Meets required Chloride Levels, Free Silica Content, Hardness and Conductivity)
Abrasive Blast Media
Version 5
8 Grades Available
Eurostile Bold Eurostile Regular
√ Conforms to ISO 11126-10 √ Mil-Spec Approved √ Low Chlorides (below 25 ppm) √ Quality Certificates (available for every tonne) √ High Purity, Low Dust, √ High Recyclability √ High Profiles, High Performance √ Superior Cleaning & Cost Effective √ Washed (Low TSS)
LI
For information on Wattyl’sonextensive product range contactproduct range For more information the Wattyl Industrial Coatings Wattylcall Customer on 132 101 or visit us at www.wattyl.com.au 132 101 Service or visit www.wattylindustrial.com.au
A
US
Tn R A & ow
ed
ma
de
DE IN
AN
A RAM LI ST
A
Free Phone AU 1800 309 734 Free Phone NZ 0800 646 372
AU
www.mineralscorp.com sales@industrial-minerals.co.nz The above registered trademarks are owned by Wattyl Australia Pty Limited A.B.N. 40 000 035 914
August 2014 www.corrosion.com.au p.13
NEWS
2nd Foundation Scholarship Release for 2014 After the great success of the First Time Conference Attenders and Post Graduate Conference Attenders Scholarships awarded last month; the ACA Foundation Ltd is delighted to release the following two (2) scholarships; 1 x Brian Cherry International Travel Scholarship, valued at $8,500 1 x International Conference Scholarship, valued at $3,500 Applications for these scholarships close on Wednesday 13 August and will be announced at the ACA Annual Dinner and Awards, in Darwin on Tuesday 23 September, 2014. For more information go to the ACA Foundation Scholarship link on the ACA website or contact Jacquie Martin on +61 (0)3 9890 4833.
2nd Round Scholarship Applications Close – Wednesday 13 August
ALTEX COATINGS LTD Altex Coatings Limited, NZ’s largest manufacturer of industrial and marine coatings under the Carboline and Altex Yacht and Boat Paint brands, has a vacancy for a self motivated person to work in our Tauranga New Zealand based Technical Services Department. Key duties include providing technical advice to customers via various media, conducting field trials and field coating inspections, product testing, development and evaluation, investigative analysis, constructing protective coatings systems for industrial, commercial and pleasure marine service areas, assisting with training seminars and trade shows. Applications close 29th August 2014. To find out more about this role and for details about applying, please visit our vacancies section on our website:
www.altexcoatings.co.nz/vacancies
Altex Coatings Ltd
l PO Box 142, Tauranga, 3140 l Phone +64 7 541 1221 l Fax +64 7 541 1310 l sales@carboline.co.nz
p.14 CORROSION & MATERIALS
August 2014 www.corrosion.com.au p.15
NEWS
ACA Welcomes New Members Corporate Gold
the 1,185km long Moomba to Adelaide Pipeline System (‘MAPS’) and the 70km long South East Pipeline (‘SEPS’) near Mt Gambier in SA.
Goldfields Protective Coatings www.goldfieldspc.com.au GPC are a highly regarded and experienced specialist corrosion control and asset protection contractor. In addition to the application of traditional epoxy and high performance urethane coatings, they provide abrasive blasting, UHP water jetting and vacuum loading. This comprehensive and complete corrosion control service provides real cost and schedule savings to their clients without compromising safety and quality. Altitude Resurfacing Limited www.altituderesurfacing.co.nz Altitude Resurfacing Limited is a specialist contractor providing tower painting and associated services on electricity transmission lines. Their people have a wealth of experience in delivering safe, high quality solutions in preparation techniques and surface coatings on steel structures. Their innovative approach and technical knowledge ensures that the best solution is attained for our customers.
Corporate Bronze
0 years serving the people of 3 Queensland
Adflex Protective Coatings has more than 25 years’ experience and is one of South Australia’s most successful small businesses in the protective coatings industry. Adflex specializes in concrete coatings, protection & restoration. Our services also extend to the coating and protection of steel structures. Adflex can provide a tailored service for your needs within any commercial, industrial, mining & residential setting. They pride ourselves on competitive pricing, quality products and a personalised service.
hey proudly work in all regions, T focusing on the Sunshine Coast, Noosa, Mackay, Gympie, South Burnett and Moreton Bay districts
Over 15 years servicing the Oil & Gas Industry Coating Inspections Audit Reports
Epic Energy is one of the largest high pressure gas transmission companies in Australia. It is the owner and operator of
They are friendly, professional civil & structural engineers and project managers.
Adflex www.adflexcoatings.com.au
BGI Group www.bgigroup.com.au
Epic Energy www.epicenergy.com.au
TOD Consulting www.todconsulting.com
Specification Reviews Contact: project@bgigroup.com.au
They provide thoughtful solutions for: infrastructure buildings subdivisions mining & industry public spaces & placemaking Specialties: oncrete bridge inspections C & remedial design imber bridge inspections T & repair design S olutions for difficult maintenance, repair and construction problems
Battling with Excessive Humidity? We have the solution. Dehumidification Technologies offers rental & sales of desiccant and refrigerant dehumidifiers. We have a wide range of dehumidification, cooling and heating equipment available to create any environment for our customer. Our innovative techniques, a wealth of knowledge and experience, and dependable service help customers achieve a successful project – on time and under budget.
1800-RentDH
(736 834)
Melbourne Sydney Adelaide Perth Brisbane
www.rentdh.com ddawson@rentdh.com 24 hours a day / 7 days a week on-call service
p.16 CORROSION & MATERIALS
NEWS
New Individual & Student Members Type
Name
Surname
Company
Branch
Individual
Zaw
Aung
Individual
Richard
Aylward
Individual
Richard
Barrett
Individual
Clive
Blanchard
DPTI
SA
Individual
Antonio
Carnovale
Savcor ART
NSW
Individual
Sumeet
Chande
Protec/Randstad
SA
Student
Wayne
Cheung
Monash University
VIC
Individual
Shane
Connolly
WA
Individual
Guy
Curtis
VIC
Student
Omar
Dennaoui
Monash University
VIC
Individual
Jonathan
Dyson
BCRC
NSW
Individual
Gary
Evans
Direct Cathodic Protection
WA
Student
Gaius
Eyu
Queensland University of Technology
QLD
Individual
David
Flanery
Deepwater Australasia
WA
Individual
Jeffrey
Fowler
Individual
Jenni
Gregg
Individual
Keith
Hargrave
Individual
Victor
Hult
Individual
Tyler
Ingersoll
Cape PLC
NCL
Individual
Gareth
Jones
Abriox
NSW
Individual
Lee
Lacour
L and L Pipewelding
VIC
Individual
Justin
Lee
New World Engineering Construction
NSW
Individual
Charles
Mann
Central Coast Inspection Services
QLD
Individual
Jason
Matthews
Refining NZ - Civil Projects
NZ
Individual
Rath
May
Individual
Andreas
Mouton
Individual
Sugan
Naidoo
Individual
James
Ragg
Polytechnic West
WA
Individual
Nicholas
Riley
Exxon Mobil
VIC
Individual
Marco
Riveros
Arrow Energy
QLD
Individual
Saad
Rushdy Ghazal
Individual
Robert
Samuels
Santo - GLNG Project
QLD
Individual
Peter
Scott
Veoila
WA
Individual
David
Smales
Individual
Clinton
Smith
Individual
Julie
Starr-Thomas
Queensland Rail
QLD
Individual
Frank
Strini
Strini Industries
VIC
Individual
Aditya
Tembe
Dymark Aust
QLD
Individual
Blake
Thomson
RTP Coatings
NSW
Individual
Lachlan
Thomson
Individual
Richard
Tomkins
Alfabs Engineering Group
NSW
Individual
Rajko
Vukcevic
Infoware Consulting
VIC
Individual
Richard
Wales
Jotun
NSW
Individual
Jessica
Wallis
Individual
Rod
White
QLD Global Manufactoring Group
QLD WA
QLD Pressure Equipment Integrity
NZ QLD WA
WA Pyromet Consulting
WA VIC
VIC
WA WA
QLD
WA Omniflex Australia
NSW
August 2014 www.corrosion.com.au p.17
NEW PRODUCT SHOWCASE
SHOWCASE 3D handheld scanners from Creaform Russell Fraser Sales (RFS) is thrilled to announce the next generation of portable three-dimensional (3D) handheld scanners from Creaform. The HandySCAN 700 is now 25 times faster than its former generation, is 40 per cent more accurate and has a volumetric accuracy of 60 micrometers per meter. It features a range of 3D scanning possibilities, regardless of the part size, complexity or material and with its quick set-up; the scanner will be operating in less than two minutes. When used with the HandySCAN 3D scanner, Creaform’s new
software Pipecheck 2.2 enables NDT service companies and pipeline operators to quickly and accurately perform evaluations of pipeline degradation and remaining service life. Complementing this exciting technology is Creaform’s new VXmodel scan-to-computer-aided design (CAD) and scan to print software which integrates directly into the in-built 3D software platform, VXelements. For more information, please call 02 9545 4433, e-mail us on rfs@rfsales.com.au or visit our website at www.rfsales.com.au
Olympus takes a closer look on the inside The ability to inspect internal surfaces and other features of a product without causing damage is one of the key benefits offered by industrial videoscopes. Remote Visual Inspection (RVI) of materials, components and structures allow technicians to detect cracks, bubbles, and other flaws that might lead to failure or other problems with equipment in the future.
can be controlled by the operator. As the camera moves, it provides a real-time image of the environment until it reaches the target area. The technician operating the videoscope can adjust the focus and move the camera as needed to examine different features of interest.
A videoscope allows an engineer or technician to view the components of a machine in situ or see inside confined spaces. Maintenance staff can also use videoscopes to inspect the insides of pipework and valves to ensure that there are no contaminant deposits or that the weld of a joint has gone all the way through the steel of the joints in the tubes of support frameworks of drill heads.
Australia www.olympus-ims.com Dorthe Svarrer, Sales & Marketing Coordinator Industrial Business Division Telephone: +61 (03) 9265 5467 E-Mail: IBDinfo@olympus.com.au
It consists of a small camera mounted on a length of cable that
p.18 CORROSION & MATERIALS
For further information, please contact:
New Zealand www.olympus.co.nz Faizal Sahib Sales Specialist Ph (+64) 9 836 9993 E-Mail: info@olympus.co.nz
ACA STANDARDS UPDATE
ACA Standards Update Welcome to the 4th corrosion related Standards Update for 2014. This Standards report focuses on corrosion issues related to the Cathodic Protection Technical Group. In this ‘Standards Update’, Focus 1 & 2 will, summarise all relevant standards to the technical group in question. Focus 1 As previously the focus will be a global standards and publication focus, searching through SAI Global Publications at https://infostore. saiglobal.com/store, for all current publications and standards relating to the ACA technical Groups, with this editions group focuses being the ‘Cathodic Protection’ technical group.
Legislation), 1 from Legislation Victoria; as shown below. Focus 2 A SAI Global search, as previously, at http://www.saiglobal.com/online/ for new standards, amendments or drafts for AS, AS/NZS, EN, ANSI, ASTM, BSI, DIN, ETSI, JSA, NSAI and standards and amendments for ISO & IEC published from 15 May 2014 to 15 July 2014, using the key words and key word groups:
Summary Through SAIGLOBAL Publications at https://infostore.saiglobal.com/store there were: 477 Titles, up 115 (32%), 10 from AS/ ASNZS (5 referenced in Australian
‘ durability’. ‘corrosion’ or ‘corrosivity’ or ‘corrosive’; but not ‘anodizing’ or ‘anodize(d)’. 'paint’ or ‘coating’; but not ‘anodizing’ or ‘anodize(d)’. 'galvanize' or ‘galvanized’ or galvanizing’.
' electrochemical' or ‘electrolysis’ or ‘electroplated’. ‘cathode’ or 'cathodic'. ‘anode’ or ‘anodic’. 'corrosion' and 'concrete' or ‘concrete’ and ‘coatings’. These results are shown in the Focus 2 report below. Summary Across SAIGLOBAL online Standards Publications there was a total of 24 listings of new standards, Drafts and Amendments, found issued from to 15 May 2014 to 15 July 2014; with zero from AS/ASNZS; as shown in Table 2 below.
Focus 1 Report The Focus 1 Report on SAIGLOBAL Publications at https://infostore.saiglobal.com/store, for all current publications and standards relating to ‘Cathodic Protection’ for the “Cathodic Protection” Technical Group Note: A Polish Standard on Competence Levels and Certification of Cathodic Protection Personnel is also listed as is an IS EN standard on the likelihood of AC corrosion on CP pipelines. Table 1 For Titles search ‘Cathodic”; result 477 Titles, up 115 (32%), 10 from AS/ASNZS (5 referenced in Australian Legislation), 1 from Legislation Victoria, as listed below Results by publisher Italian Standards
31
Association Francaise de Normalisation
26
National Association of Corrosion Engineers
26
British Standards Institution
24
German Institute for Standardisation
24
Polish Committee for Standardization
24
Nederlands Normalisatie Instituut
23
Osterreichisches Normungsinstitut
23
Danish Standards
22
Comite Europeen de Normalisation
21
National Standards Authority of Ireland
21
Belgian Standards
20
Norwegian Standards
20
Asociacion Espanola de Normalizacion
19
Standardiserings-Kommissionen I Sverige
19
Swiss Standards
19
Ford Motor Company
15
US Military Specs/Standards/Handbooks
14
International Organization for Standardization
12
August 2014 www.corrosion.com.au p.19
ACA STANDARDS UPDATE
Standardization Administration of China
10
Standards Australia
10
American Society for Testing and Materials
7
Brazilian Standards
7
Bundesamt F. Wehrtechnik unk Beschaffung
7
Bureau of Indian Standards
5
Korean Standards Association
5
Wirtschafts und Verlagsgesellschaft Gas und Wasser
4
Det Norsk Veritas
3
South African Bureau of Standards
3
American Petroleum Institute
2
American Water Works Association
2
Norsk Sokkels Konkuranseposisjon
2
American Association of State Highway and Transportation Officials
1
Anstat Legislation
1
Energy Networks Association (UK)
1
International Telecommunications Union
1
Japanese Standards Association
1
UK Defence Standardization
1
Underwriters Laboratories
1
Standards of interest from my search results S 2239-2003 Galvanic (sacrificial) A anodes for cathodic protection AS 2832.2-2003 Cathodic protection of metals - Compact buried structures This Standard is referenced in Legislation - AS 2832.3-2005 Cathodic protection of metals - Fixed immersed structures This Standard is referenced in Legislation - AS 2832.4-2006 Cathodic protection of metals Internal surfaces This Standard is referenced in Legislation - AS 2832.5-2008 Cathodic protection of metals - Steel in concrete structures
his Standard is referenced in T Legislation - AS 4352-2005 Tests for coating resistance to cathodic disbonding AS 4832-2007 Cathodic protection - Installation of galvanic sacrificial anodes in soil , AS 2832.1-2004 Cathodic protection of metals - Pipes and cables This Standard is referenced in Legislation - DR AS 2832.1; Cathodic protection of metals - Part 2: Pipes and cables RUL ML.1-2008 Rulings to metal Standards - Cathodic protection interference levels (Ruling to AS 2832.1-2004) PN EN 15257:2008 Cathodic Protection - Competence Levels and
Certification of Cathodic Protection Personnel Polish Committee for Standardization NACE SP0286:1997(R2007) Electrical Isolation of Cathodically Protected Pipelines National Association of Corrosion Engineers I.S. EN 15280:2013 Evaluation of A.C. Corrosion Likelihood of Buried Pipelines Applicable to Cathodically Protected Pipelines To access these publications, go to https://infostore.saiglobal.com/store and type ‘coatings and corrosion’ into the search box and examine the search results.
Focus 2 Report Corrosion related standards for AS, AS/NZS, EN, ANSI, ASTM, BSI, DIN, ETSI, JSA, NSAI and standards and amendments for ISO & IEC published from 15 May 2014 to 15 July 2014 for: New standards, amendments or drafts for AS, AS/NZS, EN, ANSI, ASTM, BSI, DIN, ETSI, JSA, NSAI and Standards or Amendments for ISO & IEC PUBLISHED between 15 May 2014 to 15 July 2014 Key word search on ‘durability’.- Zero citations found related to corrosion Key word search on ‘corrosion’ or ‘corrosivity’ or ‘corrosive’; but not ‘anodizing’ or ‘anodize(d)’- 2 citations in all – 0 from AS/NZS DIN 65023 (2014-08) (Draft)
Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel, classification: 1100 MPa/315 C/425 C
DIN 65024 (2014-08) (Draft)
Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, corrosionresisting steel, classification: 1100 MPa/315 C/425 C
Key word search on 'paint’ and or ‘coating’; but not ‘anodizing’ or ‘anodize(d)’ or corrosion– 19 Publications found; 0 from AS/NZS corrosion related;
p.20 CORROSION & MATERIALS
ACA STANDARDS UPDATE
ISO 3233-2:2014
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
ISO/DIS 4628-1
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO/DIS 4628-10
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
ISO/DIS 4628-2
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO/DIS 4628-3
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO/DIS 4628-4
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO/DIS 4628-5
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO/DIS 4628-7
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
ISO/DIS 7784-1
Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test panel
ISO/DIS 7784-2
Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test panel
DIN EN ISO 16927 (2014-06)
Paints and varnishes - Determination of the overcoatability and recoatability of a coating (ISO 16927:2014)
BS EN 16566:2014
Paints And Varnishes - Fillers For Internal And/Or External Works - Adaptation Of Fillers To European Standards
QPL 64159 Revision May 2014
Qualified Product List Of Products Qualified Under Performance Specification - Mil-Dtl-64159 - Camouflage Coating, Water Dispersible Aliphatic Polyurethane, Chemical Agent Resistant - Revision May 2014
ISO 10683:2014
Fasteners - Non-electrolytically applied zinc flake coatings
ISO 131791:2014
Implants for surgery - Plasma-sprayed unalloyed titanium coatings on metallic surgical implants - Part 1: General requirements
ISO/DIS 21809-3
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings
DIN EN 1660270-13 (2014-07) (Draft) BS ISO 131791:2014
Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes; English version FprEN 16602-70-13:2014 Implants For Surgery - Plasma-Sprayed Unalloyed Titanium Coatings On Metallic Surgical Implants - Part 1: General Requirements
14/30300605 DC Petroleum And Natural Gas Industries - External Coatings For Buried Or Submerged Pipelines Used In Bs En Iso 21809-3 Pipeline Transportation Systems - Part 3: Field Joint Coatings Key word search on 'galvanize' or ‘galvanized’ or galvanizing’ – 0 Standard Publications found Key word search on 'corrosion' with examination for concrete related standards - 0 Standard Publications found Key word search on ‘cathode’ or 'cathodic' -2 corrosion related Standard Publications found; none from As AS/NZS I.S. EN ISO 15589-2:2014
Petroleum, Petrochemical and Natural gas Industries - Cathodic Protection of Pipeline Transportation Systems - Part 2: Offshore Pipelines (iso 15589-2:2012)
BS EN ISO 15589- Petroleum, Petrochemical And Natural Gas Industries - Cathodic Protection Of Pipeline Transportation 2:2014 Systems - Part 2: Offshore Pipelines Key word search on 'anode' or ‘anodes’ or ‘anodic’ – 0 Standard Publications found Keyword Search on 'electrochemical' or ‘electrolysis’ or ‘electroplated’ ISO 17081:2014
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
Keyword Search on 'anodize' or ‘anodized’ - 0 Publications found Arthur Austin ACA Standards Officer
August 2014 www.corrosion.com.au p.21
BRANCH & YCG EVENTS
ACA YCG SA Branch Korvest Galvanisers Site Visit 27 April 2014 The first ACA YCG SA Branch event of the year met with great success. Proudly supported by Korvest Galvanisers and the Galvanizing Association of Australia (GAA). Ann Sheehan from the GAA kicked off with a presentation about the history and the ins and outs of hot dip galvanizing. GAA is an industry Association established in 1963 to represent galvanizing companies and to provide technical consulting services on a not-for-profit basis. Peter Freeth of Korvest then led us into the workshop. Korvest operate two kettles in South Australia: A state-of-theart ceramic kettle for high temperature spin galvanizing of small products, and a large hot dip galvanizing bath allowing single dipping of structural members to 13.5m in length. During the visit several items were treated demonstrating how fast the process can take place. The evening ended with a light supper kindly organised by Korvest.
Cathodic Protection in Steel & Concrete Structures University of NSW Tuesday 17 June The first ACA NSW YCG event was a presentation on Cathodic Protection (CP) at the University of New South Wales UNSW and the attendance was strong! Kevin Woodland spoke first, discussing CP within concrete, along
p.22  CORROSION & MATERIALS
with a quick overview of CP theory and a few case studies. Brian Martin of Brian Martin & Associates spoke of CP in pipelines, particularly speaking of the various residual current effects that can be found in large scale infrastructure such as the effects of rail and traction tracks. Phil Bird of MCM and Mathew Cole of Original Welding then spoke
briefly about employment opportunities within the corrosion industry to the many students from UNSW who were in attendance at the event. Thanks to UNSW and the NSW ACA Branch President Jianqiang Zhang offered vital support with the venue and light snacks for the event.
BRANCH & YCG EVENTS
ACA Trade Shows Adelaide Trade Show The South Australia Branch kicked off this year’s series of Corrosion Trade Shows on 26 June setting a high standard. The demand from both businesses and visitors was high with 25 traders and over 130 visitors. Businesses represented included a cross section of asset owners, protective coating specialists, blasters, applicators, equipment specialists and more. Great food, beverages and a door prize for a weekend getaway, plus footy tickets made this a great casual business networking opportunity and lots of fun. The evening ended with a light supper kindly organised by Korvest. Hobart Trade Show The Tasmania Branch hosted its first Trade Show on 2 July in Hobart. Demand for trade tables was high with all spaces filled in less than 2 weeks! An additional trader was accommodated making for a packed outfit.
Visitors to the show came from both Hobart and Launceston with a huge number of unexpected but very welcome guests arriving as a result of the mysterious ‘country telegraph’ that works so well in the Tasmanian business community. As a result, numbers surged from 55 to a peak of 85 within an hour! Good food and plenty of beer contributed to a relaxed atmosphere in which traders strengthened existing relationships, made new ones and gained exposure for their brands. Melbourne Trade Show The Victoria Branch capped off the hattrick of Corrosion Trade Shows in what has proved to be a winning format. This 3rd and final show for 2014 was a monster event with over 165 registrations! Melbourne’s cold and wet welcome did not seem to deter the demand. Traders informed their clients of the show generating a fresh inflow of
potential clients and customers well beyond the ACA’s database of contacts. In what is now a Trade Show tradition there was a lucky winner for the door prize and for the brightest shirt. The combination of corrosion and conversation in a relaxed atmosphere made the night a productive one for business and friendships.
CR OO RSI ROOSI CR N OO R NOPO COR TR A SI D O NE PO EX TRA DE EX TRADE EXPO
Hobart Melbourne
Adelaide
Thursday, 26 June, 2014 Wednesday, 2 July, Stamfo 2014 rd Plaza, 150 North Terrace, Thursday, 10 July,Salama 2014 nca Inn Adelaide Oaks on Collins 10 Gladstone Street, Hobart 480 Collins Exhibition times 4–7pmStreet Melbou Exhibition timesRegistr 4–7pmation essentirne PRESENTED BY: al via www.trybookin g.com/85971 Exhibition timesRegistr Enquiri eswww.tr PRESENTED BY: 4–7pmation essenti via Solange al via Brave, ybookin (03) 9890-48 g.com/8 5971 33 or sbrave@corrosion.com.a Enquiri Registration essenti eswww.tr via Solange al via Brave, (03) 9890-48PRESENTED ybookin 33 u BY: g.com/8 or sbrave@corrosio 5971 Drinks Enquiries via Solange and n.com.a u finger food included Brave, (03) 9890-48 33 or sbrave@corrosio Drinks and n.com.a u finger food included Drinks and finger food included
EXHIBITORS: FREE FREE ENTRY EXHIBITORS: FREE ENTRYENTRY EXHIBITORS:
2 night’s accommodation at Stamford Plaza and 2 x AFL tickets.
August 2014 www.corrosion.com.au p.23
TECHNICAL EVENT REVIEW
PROUDLY PRESENTED BY:
Concrete Performance for Coastal Assets
SPONSORED BY:
The Concrete Structures & Buildings Technical Group of the ACA held a technical event on Thursday 12 June at the Marriott Hotel in Melbourne.
This full day technical event had over 85 delegates from a broad cross section of the industry from around Australia in attendance. This event focused on real life case studies, exploring both successes and failures. The presenters shared their experience and the lessons they have learnt. Presenters from each of the following industry groups presented case studies on new and existing projects; Asset Owners, Researchers, Consultants, Contractors & Suppliers. At the conclusion of the event an open floor forum was held and chaired by Warren Green, which provided much discussion on the issues within the industry. The ACA would like to thank all speakers, sponsors and delegates who attended this event and for making the day a huge success! Below is an overview and summary of the presentations: Whole of Life Asset Management for Concrete Structures in the Local Ports of Port Phillip and Western Port Ledene Ellis, Parks Victoria Maritime infrastructure managed by Parks Victoria includes 12 sites that have components of the structure constructed in concrete. These concrete structures have a design life on average of 50 years. A number of these assets are now approaching the end of their useful design life, as of a similar age
p.24  CORROSION & MATERIALS
and previously constructed by the Port of Melbourne Authority adopting varying designs. With maritime structures exposed to extreme environmental conditions, weathering, storms and damage from vessel impact, Parks Victoria monitor this infrastructure technically via a number of methods in order to determine; the current structural condition, the estimated residual design life, the current vehicular and berthing load capacity rating (as to be adopted, based on structural condition) and the minor and major works required (both short and long-term). This information assists Parks Victoria in managing risk proactively, seeking investment for the infrastructure and programming recurrent and capital works to ensure asset serviceability and public safety. Corrosion Risk at Cracks in Marine Concrete Structures Dr Chris Weale, GHD Chris reviewed the cause of early age cracking in concrete and provide examples of the occurrence of such cracks in marine projects, the significance of the cracks and if remedial works were required or not. Ageing Coastal Assets: Balancing Durability Performance with the needs of Strength, Functionality, Sustainability, and Economy Frank Collins, Monash University Coastal assets vary significantly in type and form; however they have one common trait: vulnerability to
deterioration due to exposure to the marine environment. Reinforcement corrosion in the marine environment can be exacerbated by significant dynamic and static loadings, including wave actions, tides, berthing loads, scour, and heavy vehicle/craneage loadings. Design life requirements vary significantly when comparing design codes and also the specifications for the construction of major coastal assets: under-design leading to potential deterioration where the strength and/ or functionality are compromised during the design life; whereas overdesign necessitating modifications and reconstruction of an otherwise durable asset due to changes in trade, port operation, changing technologies of shipping and materials handling. Balancing durability with over-design (versus under-design) have major implications on the sustainability and economy of a coastal asset over the life cycle and these aspects were discussed. Cathodic Protection - The Versatile Treatment for Corrosion in Marine Concrete Structures Alan Bird, Marine & Civil Maintenance Cathodic Protection (CP) has become standard practice in Australia over the last 25 years and is well established as a means of controlling corrosion in reinforced concrete in a marine environment. A wide range of CP systems and products have been developed for a variety of situations and conditions, and the technology is now used for all types of coastal structure, including wharves, jetties,
TECHNICAL EVENT REVIEW
bridges, seawalls and buildings. The presentation gives practical examples of these applications and indicates how different anode types are used in different environments or parts of the structure, often in combination with each other. A Review on the Performance of Protective Coatings and Treatments for Coastal Assets Andrew Dickinson, Parchem Andrew provided a review of various case studies of coastal assets and reviewed the performance of the protective coatings and other corrosion preventative measures on them. Performance of Epoxy Coating on Columns Exposed to Aggressive Tidal Marine Conditions & Use of Corrosion Sensors for Monitoring Performance Fred Andrews-Phaedonous, VicRoads This presentation reviewed and discussed the replacement bridge over the Mordialloc Creek on the Nepean Highway, at Mordialloc in the south east of Melbourne. It was constructed in 2008 as part of a multi-level protection approach incorporating high quality concrete and various other durability provisions. This presentation will discuss the effectiveness and performance of epoxy coating to enhance durability in an aggressive marine environment and also discuss the use of corrosion sensors for monitoring performance.
Case Studies of Concrete Performance of Wharves Frederic Blin, AECOM This presentation aimed to be the ground for an exchange of views and experiences in relation to the performance of wharves over time. Through case studies the factors linked to the ability of these assets to provide their required levels of service up to and beyond their design life were discussed. These factors were related to key maritime codes and guidelines and their importance in the design of new assets. The Challenges of Maintaining Structural Durability for Concrete in Marine Environments Mike Rutherford, Freyssinet The presentation covered the challenges imposed in maintaining good structural durability for concrete infrastructure located in marine environments where common deterioration mechanisms are present. Marine environments are the ultimate test of concrete durability. From wharves and jetties to breakwaters and off-shore structures, concrete is the most common material for construction in the marine environment because of its versatility, strength and affordability. However, facility owners spend hundreds of millions of dollars every year to repair deteriorating concrete infrastructure.
Case histories were presented relating to concrete remediation and protection projects within the marine environment engineered to meet The Challenges of Maintaining Structural Durability for Concrete in Marine Environments. Efficiency of Hydrophobic Impregnation and Migrating Corrosion Inhibitors Pedram Mojarrad, Sika This presentation reviewed Hydrophobic Impregnation and Migrating Corrosion Inhibitors systems. These systems have been studied as modern technologies in corrosion prevention of structures. The durability and efficiency of these systems have been investigated through an International research project, of which some invaluable outcomes have been recently released. This talk will share some of these outcomes. In addition to that, Low Cover Concrete were addressed as a regular issue on jobsites and an engineering solution were shared, using these systems. For further information on the ACA Technical Groups or to provide suggestions & or comments for future events please contact Brendan Pejkovic in the ACA office on bpejkovic@corrosion.com.au
August 2014  www.corrosion.com.au  p.25
TECHNICAL EVENT REVIEW
PROUDLY PRESENTED BY:
Corrosion in the Mining Industry SPONSORED BY:
The Mining Industry Technical Group of the ACA held a technical event on Thursday 3 July at the Mercure Hotel in Perth. This full day technical event had 40 delegates from a broad cross section of the industry from around Australia in attendance. The purpose of this event was to further investigate the effects of corrosion throughout the entire mining industry by bringing together a variety of stakeholders to share and talk about their experiences. The ACA would like to thank all the speakers, sponsors and delegates who attended this event and for making the day a success. Below is an overview and summary of the presentations: Corrosion Never Sleeps: Asset Management in the Gold Mining Sector Stephen Foley, Newmont Mining Corporation This presentation touched on the multifaceted challenges with asset management of various types of infrastructure across the gold mining sector and how corrosion influences
p.26 CORROSION & MATERIALS
the approach taken. Although individual operations can all too easily take on ‘silo’ mentalities, there are typically common issues where collaboration and knowledge sharing can realise substantial benefits. This is applicable to many aspects of operating a gold mine, and is especially relevant to corrosion related matters. The presentation covered typical examples of corrosion related problems across gold mines within the Asia Pacific region, within process plant, underground operations and relating it to Asset Management (ISO55000), human factors and safety/production risks. Of key note, positives and suggested improvements that service providers/suppliers could provide were briefly discussed.
specific problems for corrosion control on steel and concrete structures. Both the selection of coating material and the control of surface preparation and application are critical to ensure long term protection for the asset. A range of coatings and linings are available that can provide protection against sulphuric acid and other mineral acids – the choice depends on an understanding of the exposure environment (concentration and temperature), the material of construction, and the life expectancy of the asset. This presentation explored the benefits and limitations of potential coating solutions, and outlined the considerations that lead to the selection of an appropriate protective coating system.
Protection Against Chemical Exposure In Mining Process Areas Matthew Brown, International Paint
Management of Microbial Corrosion in Mining Industry: Lies, Stereotypes and Facts Dr. Reza Javaherdashti, ParsCorrosion
This presentation looked at the widespread use of strong acids in mineral processing provides some
This presentation discussed a material approach towards the MIC problem in mining industry. It defined what is
TECHNICAL EVENT REVIEW
meant by MIC (emphasizing that it is a corrosion phenomenon and not a new type of corrosion process) and the source of wrong assumptions in both defining and recognition of a corrosion case as MIC. The presentation also mentioned the possible ways of treating MIC and introduced the concept of “Natural biocides” which are more environmental friendly and much less toxic than what is currently being prescribed in industry. Corrosion Mitigation of Support Structures in the Mining Industry Prof Rolf Gubner, Curtain University This presentation discussed the corrosion environment in open pit and underground mining. ISO 9223:1992 Corrosion of metals & alloys - Corrosivity of atmospheres classification, has five levels: from very low to very high. When using published data on temperature, relative humidity, salt concentrations, etc., it becomes quickly clear that many mines have corrosion environments that are more severe than described in the ISO classification. Carbon steel and galvanized steel do not perform well under those condition with respect to corrosion durability, but are the most common materials used. This lecture also discussed how corrosion could be minimised by cost-effective means.
Corrosion Engineering Incorporating Composites:- An Unconventional Solution to Conventional Problems Dr Laurie Walker, Inovas His presentation examined the use of fibre composite based solutions in the manufacture, repair and protection of structural assets within the resources sector. The presentation looked at some current examples before delving into the benefits, challenges, risks and engineering considerations associated with the use of composite materials in corrosive environments. Corrosion Management and Compliance with Health & Safety Legislation Oliver Gassior, Extrin Consultants This presentation discussed why we manage corrosion and why we need to comply with Health and Safety legislation. It discussed that, as with many management systems that are implemented, there are both direct and indirect costs which need to be borne by the organisation in question. However, organisations must also recognise that the implementation of a Corrosion and Integrity Management system, that results in the reduction of corrosion related failures, will not only achieve Health and Safety compliance but will also have a direct effect on the assets overall economic performance
Corrosion Control Directory
which in turn will essentially ‘pay back’ the organisation in the future. Reinforced Concrete: Waterproofing & Durability for the Mining Industry Anton Aldred, Cementaid This presentation reviewed and identified the Primary Water Transport mechanisms in concrete, as well as readily tested Standard properties for assessing penetrability performance. It also reviewed independent laboratory results from concretes modified with water-resisting admixtures, as well as long-term performance of structures in the field up to 42 years old. It also verified the concrete properties required to ensure design-life waterproof performance and durability, including under severe chloride / sulphate or acid exposure. Lastly, a review of time-proven Performancebased Specification successfully in use over 23 years for achieving designlife waterproof and corrosion-proof reinforced concrete structures in commercial, industrial civil and mining infrastructure projects. For further information on the ACA Technical Groups or to provide suggestions & or comments for future events please contact Brendan Pejkovic in the ACA office on bpejkovic@corrosion.com.au
Are you seeking a CP consultant? Or a coating inspector or coating applicator? To search an extensive list of service providers in the corrosion prevention industry, please see the ACA Corrosion Control Directory under ‘Directories’ on the ACA website www.corrosion.com.au
August 2014 www.corrosion.com.au p.27
DULUX PROTECTIVE COATINGS. WE’RE HERE.
Protecting assets across Australasia for over 75 years, Dulux Protective Coatings’ experienced consultants provide tailor made solutions for whatever your project needs, even for the most demanding and difficult conditions. Dulux Protective Coatings supplies a premium range of coatings for protection against corrosion, chemical attack, abrasion and impact damage in diverse, harsh and corrosive environments from over 230 outlets across Australasia. Call your local Dulux Protective Coatings Representative or contact Dulux Customer Service on 13 23 77 or at www.duluxprotectivecoatings.com.au
p.28 CORROSION & MATERIALS
Protecting Australasia’s Assets
Proudly Presented By: Major Sponsor:
CORROSION & PREVENTION 20I4 PROGRAM The ACA reserve the right to exclude any paper and to alter without notice any of the arrangements, timetables and programs relating to the conference.
Sunday 21 September 2014 10:00 – 17:00
Registration Desk Opens Darwin Convention Centre
17:00 – 17:45
First Timers Function The Precinct Tavern, 7 Kitchener Drive, Darwin
18:00 – 21:00
Welcome Reception il lido, Wharf One F3, 19 Kitchener Dr, Darwin Sponsored by Incospec & Associates Australia
Monday 22 September 2014 8:30
Opening Address and Starting of The Ed Potter Corrosion Clock Auditorium 2
9:00
Plenary 1: Prabhaker Singh, University of Connecticut Corrosion of Materials and Coatings in Advanced Energy Systems Auditorium 2
9:45
Plenary 2: Jason Farrugia, Dulux Protective Coatings A Review of Techniques for Protecting Assets in the Marine & Coastal Environments Auditorium 2
10:30
Morning Tea Stream A Auditorium 2 Coatings Chair: Fred Salome
Stream B Waterfront 1 Oil & Gas Chair: Brian Kinsella
Stream C Waterfront 2 Sustainability Chair: Peter Johnson
Stream D Waterfront 3 Cathodic/Anodic Protection Chair: Alireza Kouklan
11:00
Increasing the Longevity of Assets by Providing Planned Coating Solutions J. Mackay International Paint 008
Sulfur Speciation and Corrosivity Indexing in Crude Oil and Condensate M. Suleiman Takreer Research Centre Abu Dhabi Oil Refining Company 011
Micro Climate and Durability N. Tripathi Roads and Maritime Services 069
Augmenting a Concrete CP System to Sydney Opera House a Unique Experience M. Ali GHD 030
11:30
A Case Study on Underground Hot Dip Galvanized Gas Cylinders A. Sheehan Galvanizers Association of Australia 102
Examining the Localised Corrosion Phenomenon in a Sour Environment B. Brown Institute of Corrosion, Ohio University 154
Caution for Underestimating the EPR Hazards Generated on Corroded Metallic Pipelines from Distribution Powerlines when Compared to Transmission Power Lines T. Auditore LineTech Consulting 152
Studying the Cathodic Disbondment of Coatings Using Electrochemical Impedance Spectroscopy F. Mahdavi Deakin University 077
12:00
Reversal of Polarity of Zinc Coatings, Urban Myth of Fact? M. Weston Incospec & Associates Australia 095
Effect of Sulphur on Fe-9Cr-(Mn, Si) Alloy Corrosion in CO2 -H2O Gas at 650°C J. Zhang University of New South Wales 060
Corrosion & Asset Protection in the HVAC & R Industry – The Forgotten Issue M. Weir Blygold Oceania 118
Rehabilitation of Peats Ferry Bridges S. MacDonald Freyssinet Australia 079
12:30
Lunch
12:45
ACA Foundation Ltd AGM Waterfront 1
13:30
Plenary 3: Rich Hays, Office of the Secretary of Defence for Acquisition, Technology and Logistics New Technologies & Future Challenges for the Prevention of Corrosion in US DoD Assets Auditorium 2
14:15
Plenary 4: Scott Collins, Santos & Andrew Mills, Wood Group Integrity Management Implementing Quantitative Risk Based Inspection in Gas Processing Facilities Auditorium 2
15:00
Afternoon Tea
August 2014 www.corrosion.com.au p.29
Coatings Chair: Ben Biddle
Oil & Gas Chair: David Lake
Advances in Sensing and Monitoring Chair: Brian Martin
Cathodic/Anodic Protection Chair: John Grapiglia
15:30
Paint Coating Selection & Specification: Changes to AS/ NZS 2312 R. Francis R A Francis Consulting Services 017
Internal Corrosion Management of Process Vessels D. Blackwell Belzona Polymerics 108
Advances in Inspectability / Validation of Non-Metallic Composite Repair Systems D. Hunter Neptune Research 156
Cathodic Protection of a Heritage Bridge – From Design to Protection A. Vinnell Aurecon 130
16:00
AS/NZS 2312.2: A New Standard for Design of Hot Dip Galvanized Articles P. Golding Galvanizers Association of Australia 128
CP For Cased Pipelines in Shore Crossings – Challenges in Design S. Claveria Atteris 086
Corrosion Monitoring Under Disbonded Coatings F. Varela Deakin University 046
Understanding the Effects of Electrical Interference Signals and the Environment on the Effectiveness of Cathodic Protection Y. Huo Deakin University 049
Premature Corrosion of WellHead Flexible Hoses: A Case Study S. Krismer Bureau Veritas 147
Energy Efficiency of Photonic Materials by Electrochemical Impedance Spectroscopy K. Habib EBR Centre, Kuwait 010
Your Not-So-Typical Concrete Cathodic Protection System U. Kreher Aurecon 149
New Experimental Rig to Investigate Corrosion Under Insulation at Different Climate Conditions T. Pojtanabuntoeng Curtin University 141
Protimeter Revisited for Large Scale Damp Investigations A.L. Airey Airey Taylor Consulting 136
The Effects of Mechanical Stress, Environment and Cathodic Protection on the Degradation and Failure of Coatings: An Overview S. Ranade Deakin University 050
16:30
17:00
Coatings Forum
17:3019:30
Exhibition Opening Exhibition Hall 2 & 3, Darwin Convention Centre
18:30
Young Corrosion Group Event The Precinct, 7 Kitchener Drive, Darwin Sponsored by Galvanizers Association of Australia
Tuesday 23 September 2014 8:45
PF Thompson Lecture: Warren Green, Vinsi Partners Electrochemistry and Its Relevance to Reinforced Concrete Durability Repair and Protection Auditorium 2
9:45
Plenary 6: Ben Fultz, Bectel The Challenges of LNG Materials Selection Auditorium 2
10:30
Morning Tea Stream A Auditorium 2 Coatings Chair: Robert Francis
Stream B Waterfront 1 Oil and Gas Chair: Andrew Hargrave
Stream C Waterfront 2 Concrete & Architecture Chair: Brad Dockrill
Stream D Waterfront 3 Cathodic/Anodic Protection Chair: Bruce Ackland
11:00
Further Developments in Accelerated Laboratory Evaluation of Coatings for Use Beneath Thermal Insulation A. Ovington International Paint 023
Understanding Corrosion Under Insulation (CUI) Using Coatings M. Buckhurst Jotun AS, Norway 151
Corrosion Protection of Reinforced Concrete Structures in Remote Locations: Cape Don Lighthouse, NT A. Bird Marine & Civil Maintenance 120
Management of Cathodic Protection Systems in Marine Environments A. Cheaitani Remedial Technology 109
11:30
Assessment of Weld-Zone Coating Repair Methods for Zn-Alloy Coated Hollow Sections B. McCormack Orrcon Steel 058
Microbiologically Influenced Corrosion: A Review Focused On Hydrotest Fluids In Subsea Pipelines L. Machuca Curtin University 117
New Results for the Corrosion of Reinforcement in Marine Environments R. Melchers The University of Newcastle 039
12:00
Fusion Bonded Polyethylene Coatings - 40 Years On A. Fletcher Pentair Water Solutions 094
Use of Aerial Drones as a Screening Technique for Corrosion Under Insulation (CUI) Inspection in Oil and Gas Production Facilities: A Pilot Study Y. Pimpale Bureau Veritas 146
Solutions for Recurrent Issue of Low Concrete Cover in Reinforced Concrete Structures P. Mojarrad Sika Australia 148
p.30 CORROSION & MATERIALS
CP Forum
12:30
Lunch
12:45
ACA General Members Meeting Waterfront 1 Coatings Chair: Peter Dove
Oil And Gas Chair: Brian Kinsella
Concrete, Structures & Buildings Forum Chair: Warren Green
13:30
Composite Coatings: Basics of Fiber Reinforced Polymers for Pipe Repairs D. Hunter Neptune Research 157
Study of the Passivity of UNS S32003 Lean Duplex Stainless Steel in NaCl Solution Below Critical Pitting Temperature H. Castaneda The University of Akron 087
Laboratory Validation of Sensors for a Corrosion Prognostic Health Management System for Use with Military Aircraft A. Butler Defence Science Technology Organisation 084
14:00
Case Study Removing Old Coating from a Tank Floor in an Oil Refinery J. Gooden Blast-One International 119
Synchrotron Infrared Spectroscopy Analysis of Carbon Steel Surfaces K. Lepkova Curtin University 121
Field Testing of a Corrosion Prediction Health Management System on Military Aircraft A. Trueman Defence Science Technology Organisation 056
14:30
A Novel Anti-Corrosion Pipeline Coating Solution S.W. Guan Bredero Shaw 140
Effect of Mn on Corrosion of FeCr and Fe-Cr-Ni Alloys in Dry and Wet CO2 Gas J. Zhang University of New South Wales 061
15:00
Afternoon Tea
CS&B Forum
Advances in Sensing and Monitoring Chair: Richard Brodribb
NanoUT: Accurate Measuring of Wall Thickness Changes D. Kelly ConocoPhillips 054
Coatings Chair: Geoff White
Oil and Gas Chair: Fikry Barouky
Concrete & Architecture Chair: Alan Bird
Advances in Sensing and Monitoring Chair: Bruce Ackland
15:30
Nanocrystalline Alloy Structure and Ultra-Thin Graphene Coating: The Novel Nanotechnologies for Remarkable Oxidation/Corrosion Resistance R. Singh Monash University 036
Non Destructive Testing (NDT) Techniques for Detecting and Measuring Corrosion (CUI) of Plant and Structures D. Lake Attar 113
Investigation of Reinforced Concrete Resistance to Chlorides K. Kannoorpatti Charles Darwin University 131
New Method of Instant Off Potential Measurement R. Brodribb M. Brodribb 015
16:00
Myth or Fact - Higher Surface Profile Increases Coating Adhesion J. Gooden Blast-One International 048
Findings of a 4 year Study of Concrete Sewer Pipe Corrosion T. Wells The University of Newcastle 022
Latest Techniques in Cathodic Protection Monitoring and Reporting S. Watt Aegis 125
16:30
A Review of the Robustness of Epoxy Passive Fire Protection (PFP) to Offshore Environments R. Wade International Paint 025
The Chloride Conundrum in Concrete T. Pape ARRB Group 103
Manufacturing & Production Chair: Jim Galanos
Risk Factors & Concrete Asset Management (Can You Afford What You Want) G. Vile BAAM Consulting 144
Studies on the Corrosion Behaviour of Wear Resistant Hardfacing Alloys K. Kannoorpatti Charles Darwin University 059
Oil & Gas Forum
17:00
Electrochemical Characteristics of Aluminium Alloys in the Presence of Praseodymium(III) Ions A. Sudholz Defence Science Technology Organisation 047
19.0024:00
ACA Annual Dinner & Awards Exhibition Hall 1, Darwin Convention Centre Sponsored by Denso Australia
Escaped Process Gases - The Unexpected in Industrial Shed Corrosion A.L. Airey Airey Taylor Consulting 135
Wednesday 24 September 2014 9:00
Plenary 7: Pat Teevens, Broadsword Corrosion Engineering Petroleum Pipeline Integrity Under the Public ‘Microscope’: The Essential Role of Internal Corrosion Direct Assessment (ICDA) Auditorium 2
9:45
Plenary 8: Harvey Hack, Northrop Grumman Corp Design of Small Structures to Control Marine Corrosion Auditorium 2
10:30
Morning Tea
August 2014 www.corrosion.com.au p.31
Auditorium 2 Coatings Chair: Graham Carlisle
Waterfront 1 Integrity Management Chair: John Duncan
Waterfront 2 Industry Project Forum Chair: Andrew Hargrave
11:00
Auckland Harbour Bridge Painting: Development of a Future Maintenance Strategy R. El Sarraf Opus International Consultants 033
Corrosion and the Law - A Consultant’s Perspective L. Boulton Les Boulton & Associates 014
11:30
The NZ Transport Agency Guide to Bridge Painting W. Mandeno Opus International Consultants 034
Protective Coatings - A Guide to Project Delivery J. Rigby Remedy Asset Protection 074
12:00
Corrosion Properties of Cathodic Arc Evaporated Nitride Coatings L. Ward RMIT University 085
The Importance of Certification Within the Inspection Industry P. Milligan AINDT 099
Marine Corrosion Chair: Andrew Hargrave
12:30
Performance of Aircraft Corrosion Inhibiting Compounds on Aluminum Alloy 2024-T3. S. Jacob BAE Systems 040
Corrosion and Mechanical Issues in HSFG Bolts D. Lilley Charles Darwin University 114
A Comparison of Corrosion Profiles of Steel Strips, Coupons and Chains R. Jeffrey The University of Newcastle 031
Long Term Corrosion of Buried Cast Iron Pipes in Native Soils R. Petersen The University of Newcastle 028
13:00
Lunch Coatings Chair: Willie Mandeno
Integrity Management Chair: Graham Sussex
Marine Corrosion Chair: Bruce Hinton
Water & Waste Water Chair: Matthew Dafter
14:00
Corrosion Removal via Bristle Blasting Process with Implication Upon Stress Corrosion Cracking R. Stango Marquette University 116
Assessment of Subsea Pipelines C. Coppard Australian Maritime College 078
Trends in Long-Term Corrosion of Aluminium Alloys in Marine, Industrial and Urban Environments R. Melchers The University of Newcastle 038
Statistical Modelling for Pitting Corrosion of Cast Iron Pipelines Z. Soltani Asadi The University of Newcastle 020
14:30
Effect of Thiourea on the Structure and Corrosion Properties of Electrodeposited Zn-Sn M. Esfahani Swinburne University of Technology 052
Microstructure, Mechanical and Corrosion Behaviour of Duplex Stainless Steel/Carbon Steel Dissimilar Metal Welds M. Al-Elyani University of New South Wales 150
Five Year Observations of Corrosion Losses for Steels at a Severe Marine Atmospheric Site R. Jeffrey The University of Newcastle 032
Corrosion of Stainless Steel Elements in Water Pumps S. Furman AECOM 126
15:00
The Roles of The Electrolyte Composition and Concentration on the Corrosion Resistance of the Oxide Coatings Formed on AZ91D Magnesium Alloy by Plasma Electrolytic Oxidation R. Hussein University of Windsor 035
The Need for Internal Passivation of Stainless Steel Piping Systems R. Everett Everett’s Mechanical & Corrosion Consulting 132
MIC and Pitting Corrosion on Field Recovered Mooring Chain Links J. Rosen AMOG Consulting 076
Corrosion of 1010 Carbon Steel Exposed to Semi-Solid Agar A. Spark RMIT University 072
15:30
A Potential Anti-Corrosive Ionic Liquid Coating for Mg Alloy AZ31 in Simulated Body Fluids Y. Zhang Deakin University 091
Laboratory Study of UnderDeposit Corrosion of Steel Pipelines in Seawater Environment X. Wang The University of Newcastle 027
Control of Corrosion and Microbiological Growth in Fire Protection System V. Afshari GHD 088
16:00
Closing Session Auditorium 2
16:3018:00
Farewell Function Level 2 Foyer, Darwin Convention Centre
Industry Projects Forum
The Effect of Cleaning Procedures on Corrosion Coupon Surface Topography I. Chaves The University of Newcastle 045
POSTER SESSION
Waterfront 3 Water & Waste Water Chair: Robert Melchers MIC (Microbial Induced Corrosion) Case Studies - Big Issues From Small Beginnings E. Stuttard Strategic Sampling 107 Using LPR to Predict Underground Corrosion of Cast Iron Watermains M. Dafter Hunter Water 051 Corrosion of Copper in Australasian Drinking Waters: A Historical Review D. Nicholas Nicholas Corrosion 021
Paper no.
Paper Title
Corresponding Author
Organisation
013
Design of Highly Effective Corrosion Inhibitor Molecules for Acid Corrosion of Steel Using Quantum Chemical Approach
N. Khalil
Alexandria University
067
Comprehensive Corrosion Integrity Management Systems and Strategy in Order to Battle Hydrocarbon Release Due to Aging Facility and Ensure Safe Reliable Operation - the Forties Oilfield’s Experience
N. Subekti
Pertamina Hulu Energi Offshore Northwest Java Ltd
133
Benefits and Drawbacks of Pourbaix Diagram
D. Surovtseva
Charles Darwin University
p.32 CORROSION & MATERIALS
Russell Fraser Sales NDT Equipment • Ultrasonic • Ultraviolet • Radiography • MPI/DPI • Eddy Current • Surface Inspection • Hardness • & More
SUPPORTING SPONSORS CORROSION & PREVENTION 2014
Russell Fraser Sales Pty Ltd (RFS) has served Australia and New Zealand’s Non-Destructive Testing & Inspection community since 1993. Specifically for the Corrosion industry, RFS supplies 3D Laser Scanners, Ultrasonic Flaw Detectors, Thickness Gauges, Holiday Detectors, Thermal Imagers, Borescopes, Surface Replication products & much more.
VISIT US ON STAND #30 Contact RFS: T: 02 9545 4433 E: rfs@rfsales.com.au www.rfsales.com.au August 2014 W:www.corrosion.com.au p.33
C&P2014 SPONSORS
Proudly Presented By:
Major Sponsor:
+ MAJOR SPONSOR Dulux Protective Coatings www.duluxprotectivecoatings.com.au
Dulux® is Australian owned and committed to the supply of high performance protective coatings to the AustraliaPacific region for over 75 years. Dulux® Protective Coatings manufacturers a comprehensive and diverse range of protective coatings for heavy duty applications in the oil and gas industries, mining, infrastructure, chemical manufacture, purification and processing plants and coastal and off-shore construction. Long term corrosion control has been effectively achieved by the use of Dulux zinc rich epoxy primers, inorganic zinc silicates, high build epoxy intermediates, chlorinated rubber, acrylic and polyurethane topcoats; micaceous iron oxide coatings and specialist high
p.34 CORROSION & MATERIALS
performance systems such as pure polyurea elastomers and heat resisting product lines. With our world-class Research and Technology Centre and new manufacturing plant in Dandenong, and customer-focused technical consultants, we provide rapid, tailor made corrosion solutions for just about every aspect of heavy industry. Information on everything from substrate preparation, detailed coating system specifications, application methods and maintenance scheduling. Dulux Protective Coatings also has the most extensive distribution network in the industry with a comprehensive supply chain network of over 230 trade distribution outlets nationally. This ensures rapid, reliable service right across the country. Call Dulux today on 13 23 77 or visit our website at www.duluxprotectivecoatings.com.au. Worth doing, worth Dulux®. Contact: Ross Boucher E-mail: ross.boucher@dulux.com.au Phone: 0412 330 856 or +61 3 9263 5718
C&P2014 SPONSORS
SUPPORTING SPONSOR
SUPPORTING SPONSOR
International Paint
PPG Industries
www.international-pc.com
www.ppgpmc.com.au
AkzoNobel, is a technology based company specialising in coatings and chemicals and serves the Marine and Protective Coatings markets, under the brand ‘International®’. International is home to some of the best known product names in corrosion protection, fire protection, high temperature service and chemical resistance such as Interline®, Enviroline®, Intertherm®, Ceilcote®, Polibrid® and Chartek®. With market specific focus on Mining, Oil & Gas, Water & Waste Water, Infrastructure and Power, international can provide high level support for all your needs with respect to new construction and maintenance of both steel and concrete. Contact: Bronte Henning E-mail: bronte.henning@akzonobel.com Phone: +61 (0)8 8947 2554 or +61 (0)418 893 892
SUPPORTING SPONSOR Jotun www.jotun.com.au
PPG Protective & Marine Coatings (PPG) has products that protect customers’ assets in the world’s most demanding conditions and environments. Our exceptional heritage has resulted in a range of brands that are tried and trusted to deliver consistent performance in their given markets. All brands have PPG Protective & Marine Coatings as an endorsement, benefiting from unparalleled levels of experience and expertise in coatings technology. Working closely with our customers, we blend technical and business skills creating solutions to meet the constantly changing demands in all sectors. As part of PPG Industries, we are uniquely placed to offer a complete service, so you will enjoy the resources, stability and capability of a worldwide organization. Our business is built on firm foundations, enabling us to provide not only marketleading products and services, but also a level of support unmatched in the market. Contact: David Rigden National Sales Manager ANZ Phone: +61 (0)418 613 971 E-mail: drigden@ppg.com
SUPPORTING SPONSOR Russell Fraser Sales www.rfsales.com.au
Jotun is one of the world’s leading manufacturers of paints, coatings and powder coatings. The group has 74 companies and 39 production facilities on all continents. In addition, Jotun has agents, branch offices and distributors in more than 80 countries. Jotun Australia Pty Ltd supplies Protective, Marine and Powder Coatings nationally, providing a high level of local service, manufacturing locally while supported by Jotun’s global strength to provide corrosion control solutions. Concepts supported include Offshore Oil & Gas, HPI, Energy, Mining, Infrastructure, Pipelines and maintenance. Marine Dry Dockings, New Builds, Tank Coatings, etc. Contact Jotun Australia on +61 (0)3 9314 0722
Russell Fraser Sales Pty Ltd (RFS) has been serving Australia and New Zealand’s Non-Destructive Testing and Inspection community since 1993. RFS supplies equipment to the Corrosion, Aviation, Mining, Oil & Gas, Defence, Forensic and Diving industries. For the Corrosion industry, RFS supplies 3D Scanners, Ultrasonic Thickness Gauges, Holiday Detectors, Thermal Imagers, Field Microscopes, Surface Replication products and much, much more. We know how important it is to provide timely solutions to inspection problems, so we aim to keep most items in stock for immediate dispatch. Visit the RFS “Toy Shop” on stand 30 to play with the equipment on display. Phone: +61 (0)2 9545 4433 E-mail: rfs@rfsales.com.au
August 2014 www.corrosion.com.au p.35
C&P2014 SPONSORS
GALA DINNER SPONSOR
WELCOME RECEPTION SPONSOR
Denso Australia
Incospec and Associates
www.densoaustralia.com.au
www.incospec.com.au
Denso (Australia) Pty Ltd are leaders in Corrosion Prevention and Sealing Technology. The Denso range of products have been used successfully for over 80 years and have a proven track record with verifiable case histories. The Denso range comprises a variety of specialised pipe & structural coatings, marine protection systems, concrete and tank coatings, tapes, brush and spray applied liquid coatings, mastics, primers and sealants based on materials such as petrolatum, butyl rubber, bitumen, plastics and epoxy resins. Systems are tailor made for individual anti-corrosion and sealing problems developed with the realities of an on-site application in mind. Our extensive product range is suitable for use in a wide range of highly corrosive environments with operating temperatures ranging from sub-zero to 250ºC. Phone: +61 (0)3 9356 7600 E-mail: denso@densoaustralia.com.au
Incospec and Associates provides independent and authoritative consultancy in the field of Corrosion Engineering. Utilising both local and international liaisons with world class corrosion protection consultancies, we provide expertise in all aspects of Corrosion Control. Incospec’s range of services include, but are not limited to the following; Protective Coatings Consulting • Third Party Coating Inspection • Coating Failure Analysis • QA/QC Auditing and Evaluation • Specification Development Welding Consulting • Third Party Welding Inspection and Supervision • Welder Qualification • Weld Procedure Development Metallurgy and Materials Consulting • Corrosion Failure Investigations • Evaluation of Materials • Manufacturing/Process Investigations Asset Maintenance Management System • Prioritisation of Coating and Corrosion Remediation on; ° Structural Steel ° Vessels ° Piping ° Concrete • Forecasting Maintenance Budgeting • Justification for Maintenance Funding Contact: Alex Shepherd, General Manager Phone: +61 (0)8 8267 4744 E-mail: mail@incospec.com.au
p.36 CORROSION & MATERIALS
C&P2014 SPONSORS
YOUNG CORROSION GROUP FUNCTION SPONSOR
WATER BOTTLE SPONSOR
Galvanizers Association of Australia
www.blast-one.com.au
Blast-One International
www.gaa.com.au
Galvanizers Association of Australia (GAA), established in 1963, is a not for profit industry association comprising the leading hot dip galvanizing companies throughout Australia. The GAA conducts research and compiles case studies in various areas dealing with corrosion protection and hot dip galvanizing. We also stand on various Australian Standards' committees for galvanizing and related industries. We provide free technical publications and information on all aspects of hot dip galvanizing; including the process, application, durability, design and painting of hot dip galvanized steel. We also conduct informative seminars for architects, engineers and many universities around Australia. Contact: Peter Golding, CEO Phone: +61 (0)3 9654 1266 E-mail: peter@gaa.com.au
COFFEE SPONSOR
Blast-One is a respected leader in and specialist supplier to the protective coatings and corrosion control industry. Since our inception in Adelaide over 35 years ago, we have evolved to the point where our local and international operations supply the most comprehensive range of quality spray, blasting and abrasive products, backed up by an envied solutions-focused approach and unmatched customer and after sales service. Our dedicated and ongoing research and development program ensures that we continue to introduce new and innovative products that allow our customers to achieve the most professional and cost-effective surface preparation and coating solutions outcomes. Contact: Wayne Butcher, Marketing Manager Phone: +61 (0)8 8292 2000
WIRELESS INTERNET SPONSOR BASF Australia www.basf.com.au
Zinga www.zinga.com.au
Zinga is a unique liquid zinc galvanizing film for the recoating of weathered galvanized surfaces, abrasive blasted new steel or suitably prepared, previously painted steel. Zinga can be rejuvenated in-field with minimal cleaning and surface preparation before recoating. The process can be repeated indefinitely. Service life is predictable on a similar basis to hot dipped galvanizing. It will depend on the coating thickness and the local zinc usage rate. Zinga will not flake, blister or peel, plus the cathodic protection qualities prevent under-creep if the coating is damaged.
With Master Builders Solutions, BASF introduces a global brand of advanced chemical solutions for construction. The brand builds on the strengths of many existing BASF brands and products and represents our experience of more than 100 years in the construction industry. The Master Builders Solutions brand brings all of BASF’s expertise together to create chemical solutions for new construction, maintenance, repair and renovation of structures. Master Builders Solutions is built on the experience gained from more than a century in the construction industry. Contact: Andrew Sarkady Phone: +61 (0)418 530 763 E-mail: andrew.sarkady@basf.com
Phone: +61 (0)3 6273 5118 E-mail: info@zinga.com.au
August 2014 www.corrosion.com.au p.37
Visit us at stand no: 32
We’ve got you covered Pluto LNG module image courtesy of Woodside
Supporting your projects in Australasia and around the world Design | Application | Tech Service | Installation | Maintenance AkzoNobel’s global presence means that our project management and technical service experts can assist with all your project’s coating needs. From specification advice during FEED, to specification optimization at detailed design. Our Interplan™ Mobile maintenance planning program is also now available. AkzoNobel, through its International® product range, is more now than ever, there to support you every step of the way.
Toll Free Australia: 131 474 | Toll Free New Zealand: 0800 808 807 pc-australasia@akzonobel.com | www.international-pc.com
Protective Coatings for the Mining Industry • A world leader in protective coatings • Systems proven across the globe • Innovation, quality and performance • Close by – wherever your project is located • Providing a comprehensive technical support function
Jotun Australia Pty. Ltd. P.O.Box 105, Altona North, 9 Cawley Road, Brooklyn, Victoria 3025, Australia tel: +61 3 9314 0722 fax: +61 3 9314 0423 email: sales@jotun.com.au www.jotun.com
51946 Xstrata Mount Isa Expo 190mm x 260mm.indd 1
p.38 CORROSION & MATERIALS
16/03/2010 17:26
PITT-CHAR® XP The ultimate solution for extreme hydrocarbon fire scenarios
ppgpmc.com The PPG logo is a registered trademark. Bringing innovation to the surface. is a trademark of PPG Industries Ohio, Inc. PITT-CHAR is a registered trademark of PPG Architectural Finishes, Inc.
Proudly presented by:
Adelaide Convention Centre • Adelaide, South Australia, Australia • 15 - 18 November 2015
The Sponsorship & Exhibition Prospectus for Corrosion & Prevention 2015 has been released. To secure your space visit www.acaconference.com.au and download a booking form. Or for more information please contact Jacquie Martin at the ACA on +61 (0)3 9890 4833
August 2014 www.corrosion.com.au p.39
C&P2014 EXHIBITOR PROFILES
3C Corrosion Control Company
Abriox
www.3cccz.se
www.abriox.com
Stand Number: 2 Corrosion Control Company (3C) was founded 1996 in Sweden. 3C is a highly specialised company with extensive know-how in cathodic protection in general and sea water application in particular with a strong international focus. 3C have strategic partners in Middle East, South East Asia and Australia. Our main focus areas are Power Generation, Oil & Gas and Desalination industries. Beside of our standard products such as the Thor rectifier and Monitoring system we shall display our latest patented system for protection of pumps and pipes in desalination plants 3C has developed a range of products for cathodic protection such as Switch Mode rectifiers, automatic and remote control and monitoring systems, customized MMO anodes and probes for AC corrosion detection. 3C are member of international originations such as ACA, Nace, CeoCor and ICorr. Contact: Bjorn Lindell Phone: +46 418 411 900 E-mail: info@3ccc.se
A&E Systems www.ae-sys.com
Stand Number: 43 The A&E Group manufactures and supplies Alocit and Enviropeel products, providing a unique range of environmentally friendly anti-corrosion systems. The Alocit 28 Series range of two-pack, zero-VOC, epoxy coatings is well known for its ease of use and durability both above and underwater whilst Enviropeel, a sprayable, removable and re-usable thermoplastic barrier coating system, is revolutionising corrosion protection with its ability to protect important assets for up to 75 years in the harshest environments. Contact: Chris Harrey Phone: +61 (0)8 9418 3688 E-mail: chrisharrey@ae-sys.com
p.40  CORROSION & MATERIALS
Stand Number: 8 Abriox are leading manufacturers of remote monitoring systems for cathodic protection; with offices in Europe, America and Australia. Abriox equipment allows operators to see how their pipeline cathodic protection is performing from any computer or mobile phone and alerts engineers to any problems by e-mail or text message. The system also provides synchronised, programmable, interrupt cycles for surveys. The Abriox system helps increase the life of pipelines and assets, significantly reduces operating costs, safety risks and environmental impact. With thousands of units in use, worldwide, Abriox customers have seen payback on their investment in as little as 12-18 months. Contact: Gareth Jones, Business Development Manager, Australia & New Zealand Phone: 1300 553 272 E-mail: gareth.jones@abriox.com
ABSS www.abss.net.au
Stand Number: 50 & 51 ABSS manufacture a range of Australian Made Abrasive Blast Cleaning Rooms, Airless Blast Turbine Wheel Machines, Abrasive Recovery Systems, Blasting Cabinets, Blast Pots, Bucket Elevators, Screw Conveyors and Compressed Air PreFilter Systems. Working closely with our Global Partner Network, we complement our Australian Made products with a range of Growell Turbine Airless Blast Systems, Camfil Gold Series Dust Collectors, Mobile Dust Collectors and the latest innovative range of Vapor Abrasive Blasting Systems. We carry an extensive range of Blast ancillary equipment and Blasting Media including Garnet, Glass Bead, Plastic, Apricot Shell, Ceramic Bead, Steel Grit and Steel Shot. Contact: Jon Sweet, Business Development Manager or John Bellato, Managing Director Phone: +61 (0)430 391 926 or +61 (0)409 123 044 E-mail: jonsweet@abss.net.au or johnb@abss.net.au
C&P2014 EXHIBITOR PROFILES
Aegis
Anode Engineering
www.aegis.net.au
www.anodeengineering.com
Stand Number: 1 Stand Number: 17 For more than 80 years Aegis has designed and manufactured test equipment for utility companies worldwide. Aegis strives to maximise the life of a utility network, seeking continuous reliable operation and performance. From contractors to network owners, Aegis provides test and measurement solutions for daily use. Aegis is transforming the corrosion protection industry by providing 24/7 monitoring of your protection systems. No longer need you wonder whether your network is being protected, let the DataCell product range do it for you. Sit at your desk and analyse the data, react to alarms only as required, and proactively maintain your asset efficiently. Contact: Matthew Mitchell or Steve Watt Phone number: 1300 723447 E-mail: m.mitchell@aegis.net.au or s.watt@aegis.net.au
AMAC Corrosion www.amacgroup.com.au
Stand Number: 5 40 years of Manufacturing in Australia!! This year we are very proud to be celebrating our 40TH YEAR OF MANUFACTURING IN AUSTRALIA!! We are still a family owned and run business, manufacturing cathodic protection systems in Melbourne. We specialise in manufacturing Aluminium, Magnesium and Zinc sacrificial anodes as well as manufacturing & assembling impressed current anodes and cathodic protection materials and equipment. We design and manufacture products to suit every application and industry. Over 40 years, we have learnt to supply very high quality, cost effective products. We maintain our accreditation to ISO9001 and have since 1997. We look forward to catching up with you all at this year’s conference. Contact: Mark Rigg, General Manager Phone: +61 (0)3 9729 8888 E-mail: markrigg@amacgroup.com.au
Anode Engineering Pty Ltd is a specialist product and service provider to the corrosion industry in Australasia. We pride ourselves on being able to provide complete corrosion management solutions. Our team leads the industry in design, installation, commissioning and management of CP systems. Our long standing association with the industry has allows us to provide cutting edge products, services and technology for corrosion management and prevention needs. • Anodes • CP Systems, Instrumentation & Materials • Coating Assessment, Equipment & Services • Survey Equipment • Remote Monitoring Systems • Corrosion Monitoring • Earthing/Surge Equipment • CP Backfills • Exothermic Welding • Holiday Detectors • MIJ’s and Flange Isolation • Pile Protection & Anti-Fouling • Nut and Bolt Protection • Staff Training • Swain Meters Thermoelectric Generators (TEGs) • Vapour Phase Corrosion Inhibitors Come and see us at Booth No 1 in Darwin Contact: Wayne Burns Phone: +61 (0)7 3801 5521 or +61 (0)400 960 042 E-mail: sales@anodeengineering.com
Anti Corrosion Technology www.anticorrosiontechnology.com
Stand Number: 27 & 28 Anti Corrosion Technology (ACT) is an Australian-based engineering company that specializes in providing sustainable solutions in materials engineering and corrosion control by senior specialists for the oil & gas, water, mining, marine and power generation industries. ACT is also the authorised and sole distributor of STOPAQ visco elastic systems in Australia offering unique and cost effective solutions for external pipeline corrosion protection including factory applied mainline coating, field joint coating,
August 2014 www.corrosion.com.au p.41
C&P2014 EXHIBITOR PROFILES
flange and valve protection, HDD, steel pipe casings under road & rail crossings as well as corrosion protection of tank bottoms and offshore/submerged structures such as platform risers, wharf piles and jacket legs. Phone: +61 (0)7 3344 4434 E-mail: info@anticorrosiontechnology.com
Atteris
The Pickling and Passivation process is one of the most important parts of undertaking a stainless steel project – why? Contact: Richard Raper, Director Phone: +61 (0)400 816 290 E-mail: richard@apaps.com.au
Blygold www.blygold.com.au
www.atteris.com.au
Stand Number: 21
Stand Number: 14
An Australian owned and operated company; Atteris offers pipeline engineering design and integrity solutions for offshore and onshore developments; designing from concept through to detailed design, package management, project engineering and client representation, to subsequent pipeline integrity management and fitness for service engineering assessments.
Blygold prevents and stops corrosion in air conditioning systems with our unique anti-corrosion coating products.
Our engineers all have site experience which is fed back into our engineering to deliver practical Greenfield and Brownfield solutions that consistently reduce cost, time and risk; whilst maintaining a level of integrity that is fit for service, reliable, and maximises production uptime. Regardless of diversity and scale, Atteris has the expertise and agility to partner with you. We are a boutique consultant that works in partnership with our clients to deliver successful projects. Contact: Dan Hayes, Engineering Manager Phone: +61 (0)8 9322 7922 E-mail: info@atteris.com.au
Australian Pickling & Passivation Service www.picklingandpassivation.com.au
Stand Number: 29A
Blygold Oceania is part of Blygold International, which has been established for over 36 years with a reputation for excellence and quality of products and services. Blygold services many clients such as offices, retail, airports, hospitals, hotels, and many industries. Benefits Blygold treatment: • save up to 20% on energy • double the lifespan • increase reliability • provide cleaner air Specifications Blygold treatment: • salt and acid resistant over 4000 hours • coating 25 to 30 microns • full coverage, fins and the copper tubes plus the connection between the fins and tubes • metal pigmentation, conductivity stays high • can be applied and maintained on site Contact: Mark Weir, Managing Director Phone: 1300 271 115 (Australia only) or +61 7 3807 0660 (International) E-mail: admin@blygold.com.au
Bureau Veritas www.bureauveritas.com.au
Australian Pickling and Passivation provides the fabrication and construction industries with a unique service of restoring corrosion resistance to stainless steel, high nickel alloy and titanium materials by means of chemical cleaning, pickling and passivation. With the ability to take our business on the road, we have undertaken many large fabrications and infrastructure projects in the Oil and Gas, Mining, Petrochemical and Food Industries. Our goal is to help industry ‘get it right’; we also offer consultation on a range of projects small and large.
p.42 CORROSION & MATERIALS
Stand Number: 25 Bureau Veritas AIRS provides asset reliability management services which include condition monitoring, non-destructive testing, structural integrity, metallurgical engineering, root cause failure analysis, risk based analysis & inspection, and finite element analysis. The Materials Science and Engineering
C&P2014 EXHIBITOR PROFILES
group is comprised of over 30 engineers located in labs across Australia. The services provided include: • • • •
Root cause failure analysis of plant and equipment Identification of corrosion failure modes NATA accredited chemical analysis and mechanical testing Optical microscopy, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) for forensic analyses • Preparation of material specifications and Inspection and Test Plans (ITP's) • In-situ metallurgical testing: metallographic replication, hardness testing, and positive material identification Contact: Roger Costanzi Phone: +61 (0)2 4908 2500 or +61 (0)427 141 356 E-mail: roger.costanzi@au.bureauveritas.com
Burwell Technologies www.burwell.com.au
Stand Number: 38 Australian owned and operated, Burwell Technologies is the leading manufacturer and distributor of air blast equipment, custom built blast rooms, coating application equipment, abrasives and accessories for the surface preparation industry. Burwell have maintained their lead in a competitive market by constantly evolving with technology. Many of the techniques and processes that are in common use in the industry today were pioneered by Burwell. Burwell uses the most advanced design and manufacturing techniques available allowing them to optimise product performance and custom design equipment to their customer's specific needs. From abrasive blast rooms to dust extraction units, we can design a system to suit you. A comprehensive distribution network and personal approach ensures superior customer service and support nationwide. Burwell has branches in Sydney, Melbourne, Brisbane, Adelaide, Perth, Newcastle, Townsville, Mackay, Karratha and most recently Darwin as well as distribution deals with other national suppliers. Contact: Simon McKenzie, National Sales Manager Phone: +61 (0)3 9369 3901 E-mail: simonm@burwell.com.au
Cathodic Anodes Australasia www.cathodicanodes.com.au
Stand Number: 31 Since commencing manufacturing in 1984, we have established ourselves as Australia’s largest galvanic anode manufacturer. Our foundry is designed based on Lean Manufacturing principles, where work flow efficiency gains and minimal down time has lead to significantly shorter lead times and reduced energy use. Our anodes protect billions of dollars worth of infrastructure around Australia, the South Pacific and South East Asia including industrial anodes for offshore oil rigs, floating FPSOs, mining, construction and pipelines as well as for the protection of infrastructure such as ports, wharves, sheet pile walls and desalination plants. Our anodes also protect ships, yachts, marine motors, tanks and hot water systems. Contact: Brent Linde Phone: +61 (0)7 5476 9788 E-mail: brent@cathodicanodes.com.au
Corrosion Control Engineering www.cceng.com.au
Stand Number: 48 The CORROSION CONTROL ENGINEERING (CCE) team consists of highly qualified professional engineers and technicians who specialise in corrosion mitigation and who are certified with the ACA and / or NACE and MIE Australia. CCE has committed to a Quality Management System and has been certified to ISO 9001:2008 with SAI Global, License No: QEC23138 (CCE QLD). CCE team members have been involved in the design, supply, installation and monitoring of cathodic protection systems for: • Pipelines • Wharves and jetties • Storage tanks • Mine Sites • Steel reinforced concrete • Marine vessels CCE offers a wide range of services which include: • Cathodic protection engineering services & turn-key projects • Design, consultancy, feasibility studies and various NDT capabilities • AC mitigation surveys Contact: Jim Galanos Phone: +61 (0)2 9763 5611 E-mail: contact@cceng.com.au
August 2014 www.corrosion.com.au p.43
C&P2014 EXHIBITOR PROFILES
DeHumidification Technologies
Direct Connections
www.rentdh.com.au
www.directconnections.com.au
Stand Number: 42
Stand Number: 10
Dehumidification Technologies, Inc. (DH Tech) is a provider of temporary dehumidification, heating and cooling equipment. DH Tech manufactures Desiccant Dehumidifiers in its head office in Houston Texas USA, which exhibit the latest technology in desiccant rotor technology and electronic controls.
Revolutionary Application of Technology
Industries served include industrial painting, commercial building construction, water damage restoration and a variety of industrial, food processing and manufacturing processes where precise humidity and temperature control are critical. The firm operates from nine offices in the USA, one in Canada, three in Australia and one in Thailand. DH Tech maintains an extensive fleet of mobile climate control equipment in the US and Australia with a focus on desiccant dehumidification. In Australia, the company is represented by David Dawson & James Smith. Contact: David Dawson, Australian Director Phone: +61 (0)450 008 259 E-mail: ddawson@rentdh.com
Denso Australia www.densoaustralia.com.au
Stand Number: 37 & 40 Denso (Australia) Pty Ltd are leaders in Corrosion Prevention and Sealing Technology. The Denso range of products have been used successfully for over 80 years and have a proven track record with verifiable case histories. The Denso range comprises a variety of specialised pipe & structural coatings, marine protection systems, concrete and tank coatings, tapes, brush and spray applied liquid coatings, mastics, primers and sealants based on materials such as petrolatum, butyl rubber, bitumen, plastics and epoxy resins. Systems are tailor made for individual anti-corrosion and sealing problems developed with the realities of an on-site application in mind. Our extensive product range is suitable for use in a wide range of highly corrosive environments with operating temperatures ranging from sub-zero to 250ºC. Phone: +61 (0)3 9356 7600 E-mail: denso@densoaustralia.com.au
p.44 CORROSION & MATERIALS
Direct Connections is an innovative R&D company, designing and manufacturing equipment to support the corrosion mitigation industry. We have engineered and produced numerous devices, although our main focus has been on Dataloggers for monitoring CP Systems. Our new range of BLE Loggers allows unsurpassed flexibility with wireless control, using Smartphones, Tablets, Laptops, or even remote monitoring from anywhere in the world. Minimising maintenance costs and down-time, the dataloggers are totally field-serviceable and field-calibratable. Their IP67 rated enclosure permits effortless access to the standard AA alkaline batteries, which power the datalogger’s continual use for 2 – 4 years. Contact: Nick Papas Phone: +61 (0)3 5974 8464 E-mail: nick.p@directconnections.com.au
Dulux Protective Coatings www.duluxprotectivecoatings.com.au
Stand Number: 33, 34, 35 & 36 Dulux Protective Coatings provides protection against corrosion, chemical attack, abrasion and impact damage in diverse, harsh and corrosive environments with our broad range of products. Heavy duty inorganic zinc silicate and zinc-rich epoxy primers, high build epoxies, chlorinated rubbers, epoxy-acrylic and polyurethane topcoats, micaceous iron oxide coatings, polyurea and heat resisting product lines are available from over 230 outlets across Australasia. Dulux Protective Coatings’ experienced technical consultants provide tailor made solutions for whatever your project demands, even for the most demanding and difficult conditions. Contact: Ross Boucher E-mail: ross.boucher@dulux.com.au Phone: +61 (0)412 330 856 or +61 (0)3 9263 5718
C&P2014 EXHIBITOR PROFILES
Freyssinet Australia
HEMPEL
www.freyssinet.com.au
www.hempel.com
Stand Number: 16 Freyssinet are the expert in repair solutions, offering its expertise to designers and main contractors and supports them at every stage of a project, from assistance in diagnosis to choice of the appropriate solution and implementation of the works. With its technical department made up of civil and chemical engineers, materials experts and corrosion specialists, Freyssinet has a proactive policy for the development of repair solutions and products, validated by laboratory trials and feedback from on-site experience. Our specialist teams’ know-how enables Freyssinet to meet its clients’ requirements in terms of quality, schedule, costs, safety and the environment. Its substantial network of locations enables local service and offers clients great reactivity. Contact: Nick Critchley Phone: +61 (0)409 095 931 E-mail: Freyssinet@freyssinet.com.au
Galvanizers Association of Australia www.gaa.com.au
Stand Number: 39 Galvanizers Association of Australia (GAA), established in 1963, is a not for profit industry association comprising the leading hot dip galvanizing companies throughout Australia.
Stand Number: 26 Hempel is a world-leading supplier of protective coatings for the marine, protective, container, yacht and decorative segments. Our goal is to increase the long-term value of our customers’ assets by providing them with coatings that help extend product lifetimes and reduce maintenance costs. At Hempel, ‘quality’ is a promise we deliver every day, and have been for almost 100 years. This means not only satisfying our customers’ market needs with dependable and innovative solutions, but also maintaining their commitment to international standards of excellence. Contact: Peter Florence Phone: 1800 HEMPEL or +61 (0)417 055 625 E-mail: pefl@hempel.com
Humidity Control Hire www.ciris.com.au
Stand Number: 4A Humidity Control Hire prides themselves on simplifying all humidity and temperature control solutions, our energy efficient units use desiccant and refrigerant technology to supply dehumidification with combined or separate cooling/ heating and ventilation to suit all applications. Throughout Australia and New Zealand we provide a Fast, friendly and cost effective solution for all temporary humidity and temperature control requirements
The GAA conducts research and compiles case studies in various areas dealing with corrosion protection and hot dip galvanizing. We also stand on various Australian Standards' committees for galvanizing and related industries.
Contact: Iain Thorpe Phone: 1300 758 752 or +61 (0)457 340 807 E-mail: iain@ciris.com.au
We provide free technical publications and information on all aspects of hot dip galvanizing; including the process, application, durability, design and painting of hot dip galvanized steel. We also conduct informative seminars for architects, engineers and many universities around Australia.
Incospec and Associates
Contact: Peter Golding, CEO Phone: +61 (0)3 9654 1266 E-mail: peter@gaa.com.au
Incospec and Associates provides independent and authoritative consultancy in the field of Corrosion Engineering.
www.incospec.com.au
Stand Number: 29
Utilising both local and international liaisons with world class corrosion protection consultancies, we provide expertise in all aspects of Corrosion Control.
August 2014 www.corrosion.com.au p.45
C&P2014 EXHIBITOR PROFILES
Incospec’s range of services include, but are not limited to the following; Protective Coatings Consulting • 3rd Party Coating Inspection • Coating Failure Analysis • QA/QC Auditing and Evaluation • Specification Development Welding Consulting • 3rd Party Welding Inspection and Supervision • Welder Qualification • Weld Procedure Development Metallurgy and Materials Consulting • Corrosion Failure Investigations • Evaluation of Materials • Manufacturing/Process Investigations Asset Maintenance Management System • Prioritisation of Coating and Corrosion Remediation on; ° Structural Steel ° Vessels ° Piping ° Concrete • Forecasting Maintenance Budgeting • Justification for Maintenance Funding Contact: Alex Shepherd, General Manager Phone: +61 (0)8 8267 4744 E-mail: mail@incospec.com.au
Jotun www.jotun.com.au
Stand Number: 49 & 52 Jotun is one of the world’s leading manufacturers of paints, coatings and powder coatings. The group has 74 companies and 39 production facilities on all continents. In addition, Jotun has agents, branch offices and distributors in more than 80 countries. Jotun Australia Pty Ltd supplies Protective, Marine and Powder Coatings nationally, providing a high level of local service, manufacturing locally while supported by Jotun’s global strength to provide corrosion control solutions. Concepts supported include Offshore Oil & Gas, HPI, Energy, Mining, Infrastructure, Pipelines and maintenance. Marine Dry Dockings, New Builds, Tank Coatings, etc. Contract: +61 (0)3 9314 0722
MRJ Industrial www.mrjindustrial.com.au
International Paint www.international-pc.com
Stand Number: 32 AkzoNobel, is a technology based company specialising in coatings and chemicals and serves the Marine and Protective Coatings markets, under the brand ‘International®’. International is home to some of the best known product names in corrosion protection, fire protection, high temperature service and chemical resistance such as Interline®, Enviroline®, Intertherm®, Ceilcote®, Polibrid® and Chartek®. With market specific focus on Mining, Oil & Gas, Water & Waste Water, Infrastructure and Power, International can provide high level support for all your needs with respect to new construction and maintenance of both steel and concrete. Contact: Bronte Henning Phone: +61 (0)8 8947 2554 or +61 (0)418 893 892 E-mail: bronte.henning@akzonobel.com
p.46 CORROSION & MATERIALS
Stand Number: 7 MRJ Industrial Services are a company built on over 25 year’s industry experience. MRJ have partnered with leaders in the industry bringing the latest technologies to the Australian market from many corners of the globe. MRJ offer supply, supply and install, training (on or offsite) and full specification services to architects, engineers, asset owners and end users with service based integrity, leaning on the vast experience of our international product partners. MRJ’s technologies are spread over a wide variety of market sectors including but not limited to mining, construction, marine, civil, commercial and residential. Contact: Mark Jones Phone: +61 (0)409 477 422 E-mail: mrjindustrial@iprimus.com.au
C&P2014 EXHIBITOR PROFILES
Munters
NDT Equipment Sales
www.munters.com
www.ndt.com.au
Stand Number: 46 Munters is a global leader in energy efficient air treatment solutions based on expertise in humidity and climate control technologies. We can deliver state of the art dehumidification equipment for short-term or long-term climate control to any location. For over 60 years, Munters has engineered and manufactured equipment to solve humidity and climate control problems. Our technicians will install, set and monitor equipment throughout the duration of your project. Our technical expertise enables us to advise you on your optimal requirements, giving you reassurance that the job will be completed efficiently and cost-effectively. We provide: • Corrosion Control • Surface Preparation & Protective Coating • Utilities (Oil & Gas, Power Stations) Contact: Khalid Shaikh E-mail: Khalid.Shaikh@munters.com.au
NACE International
Stand Number: 9 NDT Equipment Sales is a leading supplier of equipment and consumables to the non-destructive testing industry. Based in Sydney, we supply nationally to a wide variety of clients, including large and small NDT companies, manufacturing, government and security organisations. Our range of products includes gamma and x-ray equipment, radioactive sources, ultrasonic equipment, hardness testers, eddy current systems, magnetic particle equipment and consumables. NDT Equipment Sales is proud to have recently added the Imperium “AcoustoCam i600” to our product portfolio. This new adaption of ultrasonic technology revolutionises the inspection methods for corrosion mapping, proving up tank floors or inspecting laminates. Contact: David Morphett E-mail: ndt@ndt.com.au
Neptune www.neptunems.com
www.nace.org Stand Number: 22 & 23 Neptune is a recognised leader in providing engineered solutions to the onshore and resources industry. Stand Number: 24 NACE International, The Worldwide Corrosion Authority, serves over 33,000 members in 130 countries with the core purpose of protecting people, assets and the environment from corrosion. NACE International’s global membership includes engineers, inspectors, technicians, scientists, business owners, CEOs, researchers, educators, students and others. Located in Houston, Texas, with offices in the United States, China, Malaysia, Saudi Arabia, and Brazil, the organisation serves all industries impacted by corrosion. NACE International is the key resource for corrosion prevention and mitigation technical knowledge and information, and provides the most specified technical training and certification programs, conferences and exhibitions, industry standards, reports, and publications. Phone: +1 281 228 6223 E-mail: firstservice@nace.org
Neptune, in partnership with Charles Darwin University, provides NATA accredited Corrosion, Mechanical and Nondestructive testing facilities as well as dedicated facilities for Welding Inspection and Qualifications. Neptune’s services include: • Corrosion testing services: Corrosion consultancy, material selection, microbiologically influenced corrosion; corrosion under insulation; Corrosion of pipes and weldments. • Mechanical testing, repair and maintenance • Standard & Advanced Non-Destructive Testing Services • Rope access training • Class Surveys • Tanks inspection • Pressure Vessel and Piping Inspection • Lifting Equipment Inspections • SPS & UWILD Contact: Kathryn McDaid Phone: +61 (0)409 901 651 E-mail: kmcdaid@neptunems.com
August 2014 www.corrosion.com.au p.47
C&P2014 EXHIBITOR PROFILES
NMT Electrodes
Oil & Gas Australia
www.nmtelectrodes.com
www.energy-pubs.com.au
Stand Number: 18 Stand Number: 3 NMT® Electrodes is a well-established name in providing high quality, cost effective solutions and products in the field of Cathodic Protection. NMT® Electrodes’ Mixed Metal Oxide (MMO) and Platinised titanium Anodes are the products of choice and are used and specified worldwide for use in concrete, underground storage tanks, pipelines, offshore and marine installations among numerous other applications. NMT® Electrodes’ full range of tubular, wire, ribbon, rod, mesh, mesh ribbon and plate anodes are available from its Australian and South African facilities. Contact: Gareth van Loggerenberg Phone: +61 (0)8 9256 4499 or +61 (0)408 931 072 E-mail: Gareth@nmtelectrodes.com
Nuplex Industries www.nuplex.com
Energy Publications have been helping companies promote themselves to senior industry figures throughout Australia, New Zealand, Asia and Pacific for over 30 years. Unrivalled in quality, content and industry analysis our flagship publication Oil & Gas Australia remains a necessary tool for any companies looking to communicate effectively with and strengthen their brand position within the Australian oil and gas sector. Oil & Gas Australia can be seen at all the major industry events nationally and we feature some of the biggest players in the Australian industry every month. We are also proud to offer companies the opportunity to connect with a readership spread across the Asia region with our bi-monthly publication Oil & Gas Asia. This publication has quickly become the fastest growing and best known publication covering this region. Contact: David Murphy Phone: +61 (0)8 9443 3440 E-mail: david@energy-pubs.com.au
Oliver Technologies Stand Number: 54
www.olivertechnologies.com.au
As a trusted, global chemicals company, our products are found in everyday products, everywhere. Through our global network of production sites, sales teams and R&D specialists, our products are sold in over 80 countries. We specialise in developing, manufacturing and distributing products that enhance, strengthen and protect everything from our homes, cars and furniture, through to our bridges, buildings and boats and even our food, drink bottles and sunscreen. Really, if it's coated, covered, or consumable, chances are we've had a role in its creation. We earn our customers’ trust and loyalty by being innovative, flexible and reliable and by delivering products and technologies that solve our customers’ challenges and exceed their expectations. Contact: Scott Inman, Marketing Director Australasia Phone: +61 (0)2 8396 2709
Stand Number: 15 • At Oliver Technologies we provide products and solutions for your dust & fume control issues and abrasive blasting, spray painting & powder coating applications. • Our products can save your company money by improving safety, efficiency and also reducing your business’s impact on the environment. • We understand the Regulations, Codes of Practice and Australian Standards relevant to these applications. • We pride ourselves on the fact that customers who have purchased systems from us continue to use and recommend us. • We are happy to put you in contact with these customers or where possible arrange a visit to their facilities so you can see and hear how our products are providing benefit to their business. Contact: Thomas Hall Phone: 1300 538 948 or (0)412 551 876 E-mail: info@olivertechnologies.com.au
p.48 CORROSION & MATERIALS
C&P2014 EXHIBITOR PROFILES
Olympus Australia
Peerless Industrial Systems
www.olympus-ims.com
www.peerlessindustrialsystems.com
Stand Number: 45 Olympus is a world-leading manufacturer and distributor of high-quality optical, electronic and precision engineering products, for scientific, medical and industrial applications. The Olympus industrial leading edge testing technologies include remote visual inspection, microscopy, ultrasound, phased array, eddy current, eddy current array, X-ray fluorescence and diffraction, high speed video, and optical metrology. The Olympus products include ultrasonic flaw detectors and thickness gages, videoscopes, borescopes, microscopes, high speed video cameras, in-line and advanced nondestructive testing systems, XRF and XRD analyzers, interferometers, and a large selection of industrial scanners, probes, software programs, and instrument accessories.
Stand Number: 19 Epigen lining & repair composite polymers dominate in water storage & treatment, grouting & backing, linings for aggressive chemical resistance, process tanks, non-skid flooring, pump repair/rebuilding, turbine & motor chocking, joints, adhesives and metal repair. Peerless enjoys an excellent reputation in liaising with contract applicators, consultant design engineers and asset owners to qualify protective systems for their particular operating environments. Working with all ensures that the principle receives a system that achieves the maximum service life possible.
Phone: 1300 132 992 E-mail: IBDinfo@olympus.com.au
Peerless – Since 1947 Epigen – Since 1970 Chemproof – Celebrating 25 years in 2014
Parchem Construction Supplies
Phone: +61 (0)8 9477 3788 or fax. +61 (0)8 9477 3766 E-mail: nick@epigen.com.au
www.parchem.com.au
PPG Protective & Marine Coatings www.ppgpmc.com.au
Stand Number: 36 Parchem Construction Supplies specialises in the supply and manufacture of concrete construction products, with a specific focus on the durability and corrosion protection of reinforced concrete infrastructure. With trusted brands such as Fosroc, Galvashield & SewperCoat, Parchem has a corrosion solution for all civil, commercial and industrial projects. Our range includes: • concrete repair materials – Renderoc Range of products • corrosion protection solutions – Galvashield range of galvanic anodes • Protective Concrete Coatings – Silanes, anti-carbonation and epoxy coatings • Calcium aluminate mortars for sewer rehabilitation – SewperCoat • Range of high performance epoxy coatings and lining systems – Nitocote/Nitomortar range Contact: Andrew Dickinson, Product Manager - Concrete Durability Phone: +61 (0)424 751 582 E-mail: Andrew.dickinson@parchem.com.au
Stand Number: 55 & 56 PPG Protective & Marine Coatings (PPG) has products that protect customers’ assets in the world’s most demanding conditions and environments. Our exceptional heritage has resulted in a range of brands that are tried and trusted to deliver consistent performance in their given markets. All brands have PPG Protective & Marine Coatings as an endorsement, benefiting from unparalleled levels of experience and expertise in coatings technology. Working closely with our customers, we blend technical and business skills creating solutions to meet the constantly changing demands in all sectors. As part of PPG Industries, we are uniquely placed to offer a complete service, so you will enjoy the resources, stability and capability of a worldwide organization. Our business is built on firm foundations, enabling us to provide not only marketleading products and services, but also a level of support unmatched in the market. Contact: David Rigden, National Sales Manager ANZ Phone: +61 (0)418 613 971 E-mail: drigden@ppg.com
August 2014 www.corrosion.com.au p.49
C&P2014 EXHIBITOR PROFILES
ProDigital
Russell Fraser Sales
www.prodigital.com.au
www.rfsales.com.au
Stand Number: 6 Representing world leading brands in scientific equipment for Electrochemistry, Corrosion, impedance spectroscopy as used in corrosion, coatings, battery, sensors, fuel, microbial and solar cell research, ProDigital has, for 18 years, been providing, service and support to a wide range of research institutions within Australia and New Zealand. It continues to grow by providing new leading edge technology solutions extending to materials research and surface scanning and profiling equipment with analytical software, praised by many of our customers, at a competitive and affordable price. Our equipment is backed by manufacturers and research scientists involved in the field for over 30 years. Contact: Vincent Stafrace Phone: +61 (0)2 9674 4222 E-mail: vinces@prodigital.com.au
Stand Number: 30 Russell Fraser Sales Pty Ltd (RFS) has been serving Australia and New Zealand’s Non-Destructive Testing and Inspection community since 1993. RFS supplies equipment to the Corrosion, Aviation, Mining, Oil & Gas, Defence, Forensic and Diving industries. For the Corrosion industry, RFS supplies 3D Scanners, Ultrasonic Thickness Gauges, Holiday Detectors, Thermal Imagers, Field Microscopes, Surface Replication products and much, much more. We know how important it is to provide timely solutions to inspection problems, so we aim to keep most items in stock for immediate dispatch. Visit the RFS “Toy Shop” on stand 30 to play with the equipment on display. Phone: +61 (0)2 9545 4433 E-mail: rfs@rfsales.com.au
Rezitech Services
Sika Australia
www.rezitech.com.au
aus.sika.com
Stand Number: 11 Rezitech is a 100% Australian privately owned company which commenced trading 1968, specialising in the industrial maintenance market. With Australia wide coverage, we are the leaders in industrial maintenance solutions and pump technology.
Stand Number: 13
Rezitech are the sole Australian distributor for Belzona Polymerics. Rezitech offers a vast range of metal, rubber and concrete repair/protection materials to Australian industry.
Priding itself on being technically driven and project motivated, Sika provides a wide range of construction solutions including high quality concrete admixtures, specialty repair mortars, sealants, adhesives, damping and reinforcing material, structural strengthening systems, industrial flooring as well as roofing, waterproofing and concrete protection systems.
Rezitech are also the Australian distributor for Robuschi liquid ring vacuum pumps, and is the sole Australasian distributor for Sponge-Jet, leaders of clean, dry, low dust, reusable surface preparation media and equipment. Rezitech’s total vacuum pump service includes sales of new or reconditioned vacuum pumps, repair, replacement, design and supply of complete vacuum systems plus on-site efficiency testing. Contact: Trevor Comb, National Sales Manager Phone: +61 (0)3 8720 8600 or +61 (0)433 946 337 E-mail: trevorcomb@rezitech.com.au
p.50 CORROSION & MATERIALS
Sika is the global leading producer of specialty chemicals for the construction, industrial, automotive, mining and home improvement market.
Sika has cultivated a stand-out team of more than a hundred staff nationally including onsite product engineers, well trained customer service, other technical services team, wellequipped and knowledgeable sales force that have years of on-site and application experience. Contact: Grant Dowling Phone: +61 (0)2 9725 1145 E-mail: dowling.grant@au.sika.com
C&P2014 EXHIBITOR PROFILES
Svenic
Tufwrap Australia
www.svenic.com.au
www.tufwrap.com.au
Stand Number: 20
Stand Number: 12
As well as its comprehensive range of Manual, Air & Battery Dispensers, Two Part Disposable Cartridges & Crack Injection Systems, Svenic will display its UNIQUE CAF (Coating and Foam) Spray System.
Tufwrap Australia provides anti-corrosion, preservation and long term storage solutions nationally in conjunction with Intercept Technology™ Australia. Together we provide a modern , non invasive solution to tackling corrosive and environmental damage to parts and components for heavy industry in warehousing, outdoor storage and transport. Intercept Technology™ is available in a broad range of products and systems to provide flexible, simple and cost effective solutions for all areas of asset protection, maintenance and storage from small parts bags to large container liners. Using Intercept Technology™ solutions in conjunction with Tufwrap Australia's expertise in application, on-site assessment and monitoring we can ensure your assets are completely preserved in what is simply the best protection on the market today.
The CAF Spray System is suitable for applying coatings, sealants, adhesives and reactive foams. Utilizing disposable dual ratio cartridges, the system provides the capability to spray a wide variety of two component polyurethane, polyurea, epoxy and ceramic formulations. The Svenic CAF System is a portable & low cost spray alternative in areas where larger spray units are either impracticable or uneconomical. Svenic services also include contract filling of coatings, sealants and foams. Contact: Peter Coundouris Phone: +61 (0)7 5539 2255
Contact: Simon Archdale, Director Tufwrap Australia Phone: +61 (0)406 751 535 E-mail: simon@tufwrap.com.au
Wattyl Australia Tcorr Inspection
www.wattylindustrial.com.au
www.tcorr.com.au
Stand Number: 41 & 44 Stand Number: 4 Tcorr Inspection offers the following services : corrosion engineering and protective coating inspections (NACE), QA/QC and welding, pressure vessel & pipeline inspections offering third party inspections to assist companies maintain project quality standards. Tcorr Inspection is an internationally recognised NATA accredited inspection body able to undertake coating and hot dip galvanizing inspections in accordance with AS/NZS ISO/ IEC 17020:2013. We are the Australasian agent for IRIS Intelligent Reporting Inspection Software. IRIS is the definitive reporting software for the individual inspector, inspection, blasting and coating companies; and the engineering, oil, gas and mining industries.
Wattyl Industrial Coatings specialises in high performance coating systems for use across a vast range of market segments. Wattyl industrial coatings have been used a full spectrum of exposure environments including off shore, buried, coastal and tropical. Our extensive project history is a testament to the enduring performance of our products. Valspar acquired the Wattyl Group in 2010, further strengthening the Wattyl brand by bringing expertise and experience from one of the largest global coatings companies. Regardless of your project size, Wattyl Industrial Coatings can supply a coating system solution for you. Contact: Peter Wenzke, Marketing Manager - Industrial Coatings Phone: 132 101 E-mail: peter.wenzke@valspar.com
Contact: Andrew Twining Phone: +61 (0)419 821 799 E-mail: andrew.twining@tcorr.com.au
August 2014 www.corrosion.com.au p.51
C&P2014 EXHIBITOR PROFILES
Wolfchester Australia
ZRC
www.wolfchester.com.au
www.zrc.co.nz
Stand Number: 47 Stand Number: 53 Wolfchester Australia Pty Ltd is the proud Monti Partner for Australia, New Zealand, Papua New Guinea and New Caledonia. Monti is the manufacturer of the MBX Bristle Blaster. Established in 2006 Wolfchester supplies and supports the MBX Bristle Blaster throughout a variety of industries, including pipeline, oil & gas, marine / shipyards, bridge maintenance, mining and construction, to mention a few. Based in Melbourne, Wolfchester works closely with select local businesses throughout the region to provide on-site service, training and support. Contact the team at Wolfchester today to find out more about surface preparation with the MBX Bristle Blaster. Phone: + 61 (0)3 9737 2800 E-mail: info@wolfchester.com.au
The ZRC range of zinc rich anti corrosive coatings is distributed by Decora Group Ltd in Australia, New Zealand and the Pacific Islands. For over 50 years the ZRC range of industry leading organic zinc coatings has been specified by architects and engineers for thousands of corrosion protection projects throughout the world. ZRC offers superior product performance, environmental friendliness and extended longevity of corrosion protection. The Decora Group Ltd has been manufacturing and distributing anti corrosive coatings for over 30years. Located in Auckland, New Zealand the manufacturing facility produces an extensive range of decorative and industrial coatings. It is ISO 9001 and APAS certified, assuring quality coatings are produced to the most stringent quality control standards. Contact: Derek McClelland Phone: +64 9 813 5900 or +64 27 4940721 E-mail: derek@zrc.co.nz
Access to over 4,000 papers on-line ACA Members have access to a range of benefits in the Members Area of the ACA website including: Search Conference Proceedings Members are able to access over 4,000 papers from ACA, International Corrosion Congress (ICC) and EUROCORR (EFC) conferences as well as links to access the Journal of Corrosion Science and Engineering (JCSE) and CSIRO Publications. Select which set of papers you want to search and view or download the results.
p.52 CORROSION & MATERIALS
ACA Technical Publications Download or read online ACA Member exclusive technical publications including the fully updated 2nd Edition of Inorganic Zinc Coatings and the 3 part series of Corrosion Technology. Membership Check your Membership details and pay your membership renewal by clicking on the “My Membership” button.
The Australasian Corrosion Association Inc. C&P2014 EXHIBITOR PROFILES
Cathodic Protection
Training Courses oring Cathodic Protection Monit Sydney October 28–30 Duration: 3 days
Sydney October 13–17 Duration: 5 days
ound theory on This course covers backgr and Cathodic city corrosion, basic electri h aspects as suc ng udi incl ), Protec tion (CP Par ticipants p. protec tion criteria and IR dro rements asu me CP out ry will be able to car ial, line such as pipe-to-soil potent put, electrical current, anode current out insulating continuity, effectiveness of le insulation, cab of ss ene ctiv effe ts, join rmer-rec tifier soil resistivity, and transfo operation.
Corrosion of Concrete Structures
nced Cathodic Protection Adva understand ortunity for par ticipants to This course offers the opp tec tion Pro ic hod Cat and city , electri the principles of corrosion te. The cre con tures of soil s, water and (CP) and the corrosion fea tion tec pro nt ere diff ts to define the course will enable studen how and current sur veys, know ial ent pot et rpr inte , criteria used re dwa har ms and learn of the to troubleshoot CP proble test rs, tifie rec , ers rm sfo kfill, tran in CP such as anodes, bac ts of den stu ch course continues to tea instrumentation, etc. The ign of des and nts me uire req current s of the fac tors which determine ces pro ion vanic systems, the select impressed current and gal re. mo rent system and a galvanic or impressed cur
Course Highlights: • The Characteristics of Cement and Concrete isms • Concrete Deterioration Mechan • Corrosion of Reinforcement in Concrete Brisbane 27-28 November 2014 e • Survey and Diagnosis of Concret ts men sure This course will provide a solid Mea • On-site foundation of knowledge about the • Laboratory Measurements corrosion of both reinforcement and • Repair and protection of this concrete, so that those working in Reinforced Concrete tions field can reach more effective solu • Repair of Damaged concrete of in the prevention and remediation • Cathodic Protection s this ever-growing problem. • Further Electrochemical Method New for s sure Mea ve • Preventi Concrete
ACA/ACRA Corrosion & Protection of Concrete Structures
ions, trol tests and producing specificat con y alit qu t ou ng ryi car to ts cep From basic con tings. ve your knowledge of protective coa this short ACA courses will impro
Protective Coatings
ol Protective Coatings Quality Contr (3 days) Perth 8-10 December rove the skills of carrying This course aims to formalise or imp ociated with protective coatings out basic quality control tests ass onstrations, and extensive projects. It uses formal lectures, dem hods. practical exercises as teaching met
Register now at www.corrosion.com.au August 2014 www.corrosion.com.au
p.53
PROJECT PROFILE
Use of Non-intrusive Inspection in Onshore Gas Facilities: A Pilot Study In 2011, a pilot program of Non-intrusive Inspections was conducted, covering a total of eight vessels in the Moomba gas processing plant and in surrounding field areas. Background The opportunity for Non-intrusive Inspection (NII) was brought about, at least in part, by the widespread implementation of Risk-based Inspection in Santos. Previously major outages were driven by prescriptive requirements for internal inspections of pressure vessels every four years (for most vessels). After Risk-based Inspection was implemented, the internal inspection intervals were extended for many vessels, but there were a few remaining items still requiring internal inspection every four years. In particular, flare drums required shorter inspection intervals due to the greater variability in their service conditions and the modelled corrosion rates. Therefore the driver for Nonintrusive Inspection was to avoid costly plant shutdowns which were otherwise driven by a very few, or in some cases, a single vessel. This made Non-intrusive Inspection a cost effective option. Non-intrusive Inspection The commonly accepted definition of Non-intrusive Inspection is an inspection to determine the internal condition of the equipment without having to open the equipment. Location
Moomba Plant
Merrimelia satellite (field)
Della satellite (field)
In practical terms the process uses conventional Non-destructive Testing with a detailed and planned scope, aiming to achieve an understanding of the internal condition which is at least equivalent to an internal inspection. The use of Non-intrusive Inspection is allowable within the applicable Australian/New Zealand Standard, which is AS/NZS 3788 – 2006, Pressure Equipment – In-service Inspection. The decision was made early on to employ a specialist inspection provider, with experience in scoping and execution of Non-intrusive Inspection. The inspections were carried out by Sonomatic Limited, a pioneer of the technique in the North Sea, in partnership with Bureau Veritas. In this pilot study, the main Nondestructive methods used were Ultrasonic Testing (UT), including ultrasonic corrosion mapping, Radiographic Testing (RT) and Time of Flight Diffraction Ultrasonics (TOFD). The Time of Flight technique was used to inspect for weld defects. The actual techniques used and the coverage required, for each particular inspection, would be a function of the identified degradation mechanisms for that equipment.
n established Risk-based Inspection A programme, with well-understood corrosion rate models The dominance of CO2 corrosion as a degradation mechanism, where Nondestructive Testing methods are well established, with a high probability of detection of defects and underlying corrosion problems xisting corrosion models which E indicated that corrosion was either slow or not anticipated, and hence there was a high probability that inspection would serve to validate the predictions, rather than one which identified a need for remedial actions Vessel Selection Vessels were initially short listed on the basis of the next due inspection date. Due dates in the 2011-2015 date range were targeted. Eight vessels were selected, as shown in Table 1.
Vessel
Driver for Non-intrusive Inspection
Flare Vessel
Avoid total outage
Gas slugcatcher
Difficult inspection geometry
3-phase separator
Simplifying shutdown scope
Amine Absorber
Avoid major outage
Flare Vessel
Avoid major outage Removing confined space entry from field outage (improved safety)
Inlet separators (2 of) 3-phase separator
Table 1. Vessels selected for Non-Intrusive Inspection in Santos
p.54 CORROSION & MATERIALS
Local Factors Favouring Non-intrusive Inspection An extensive and detailed inspection history, extending for almost 30 years
Removing confined space entry from field outage (improved safety)
Figure 1. Amine absorber, with scaffolding in place on lower strakes and dome to allow Non-intrusive Inspection.
Figure 2. Ultrasonic corrosion mapping on amine absorber, using rope access.
From the table, it can be seen that the judicious application of Non-intrusive Inspection can avoid or defer major outages which would otherwise have significant impacts on production. An important driver in the field areas is the issue of the safety of confined space inspections, as a confined space entry in a remote site requires additional rescue personnel on standby. Planning for Non-intrusive Inspection The planning required for this type of inspection commenced well before the inspection date; the minimum practical planning time was about three months. Planning was in two stages: a desktop review and an onsite evaluation. The desktop review included a review of the inspection histories and the existing Risk-based Inspection model outputs. The on-site evaluation was a job walk through. This included identifying the physical access, where scaffolding or rope access was required and where insulation needed to be removed. At the end of the on-site evaluation, a written inspection scope was produced
Figure 3. Inspection of gas plant flare drum.
which included a formal evaluation of whether Non-intrusive Inspection was feasible for the vessel. Execution Advance preparations included scaffolding and the mobilising of equipment and technicians to site. A combination of rope and scaffold access was used, for the onsite inspections. Scaffolds were completed at least two weeks prior to the start of works. Each of the specialist inspection technicians were paired with an onsite technician. This not only leveraged the advanced Non-destructive Testing skills, but also expedited the start of the work by including personnel already familiar with the site. An additional Sonomatic technician was supplied to site for the purposes of data collation for forwarding to the engineering team. This allowed for timely review of the data collected by off site engineers, so that anomalies could be identified and additional testing expedited, while access was available and the equipment and technicians were still on site.
Figure 4. Weld inspection of gas plant flare drum, using Time of Flight Diffraction Ultrasonics.
Project Results In all cases the required inspection interval was achieved. As expected, no immediate concerns were noted from the inspections; this meant that no intrusive inspection activities were required before the next inspection. The total project cost was approximately $1.8 M (covering eight process gas vessels), or an average of $225 K per vessel. The estimated savings were $10 - 13M, over 5 years. The savings were mostly attributed to delay of outages and in one case delaying a total plant outage. In terms of direct inspection costs, the Nonintrusive Inspection was about twice that of conventional intrusive visual inspection, for a simple vessel. For a reasonably large vessel, of simple construction (such as a flare drum), the duration of the work was about ten shifts (of ten hours each), for a team of two technicians. E. Jones, Bureau Veritas Asset Integrity and Reliability Services Pty Ltd M. Cooper, Santos Ltd
Selected photographs from the inspections are shown in Figures 1 – 4.
Resource
Non-intrusive Inspection
Conventional Intrusive Inspection (Confined Space Entry)
Scaffolding
More extensive; needs to cover most of shell
Some required to access the vessel manway. Additional internal staging may be required to reach internal features
Cleaning
May be needed to make external surface suitable for Ultrasonic Thickness Testing
Extensive pressure cleaning to make safe for vessel entry with safe removal of sludge. Gas testing required for safe entry
Water
Low flow clean water needed as a couplant for Ultrasonic Thickness Testing
Potable water needed for high pressure cleaning
Maintenance labour requirements e.g. fitters
Minimal (except if insulation Extensive for vessel opening removal required)
Permits
Normal hot work permits A confined space entry may be required for vessel skirts
Normal hot work permits Confined space entry permit, risk assessment, rescue plan
Process operations labour
Permits only (timing more flexible)
Requires preparation of blinding lists and taking vessels off line. Adds to peak labour requirements during turnarounds.
Table 2. Compares the activities required to support conventional and Non-intrusive Inspections.
August 2014 www.corrosion.com.au p.55
COATINGS GROUP MEMBER PROFILE
Murrumbeena Industrial Spray Painting Pty Ltd Q: In what year was your company established? A: 1972 Q: How many employees did you employ when you first started the business? A: The business was started by the founding husband and wife team Marijan Brusar Snr and his wife Durda Brusar. Marijan passed away last year and his wife has retired. The business has been passed down to their son Marijan Brusar Jnr. Q: How many do you currently employ? A: The numbers can fluctuate depending on projects at any given time but we generally have 5 employees. Q: Do you operate from a number of locations in Australia? A: We are a Melbourne-based company with contracts and projects around Australia. Q: What is your core business? (e.g. blasting and painting, rubber lining, waterjetting, laminating, insulation, flooring etc.) A: We provide a specialised spray painting service to all industries, big or small. Our prime concern is to give first class quality at all times. Our customer’s materials are handled with the utmost care throughout the process, making quality control of prime importance. Our staff are trained to carry out the most stringent checks throughout the process. Monitoring the wet film thickness as well as dry thickness testing with the
p.56 CORROSION & MATERIALS
most up to date measuring devices to ensure all our work completely meets the specifications required. We also have a large focus on automotive components to Australian Standards and Government Specifications, military painting to Australian Paint Approval Scheme (APAS) – Standards. Q: What markets do you cover with your products or services? e.g. oil & gas, marine, chemical process, general fabrication, tank lining, offshore etc. A: Our business division enables us to cover most markets, such as: oad and Rail R Defence - Marine Defence - Land Construction - Landmark architecture and building Lighting Industry Transport Vehicles Retail & Industrial- Signage Plastic Industry Q: Is the business yard based, site based or both? A: We are primarily a yard based company. Q: Do you offer any specialty services outside your core business? (eg. primary yard based but will do site touch up etc.) A: In addition to our core Business, we offer consultancy/technical support and project management. Q: What is the most satisfying project that you have completed in the past two years and why?
A: Bushmaster vehicles for the Department of Defence - Land showcased our core strengths from all divisions. The project demonstrated our adaptability and proficiency to deliver a great quality outcome. Q: What positive advice can you pass on to the Coatings Group from that satisfying project or job? A: The best advice for a great outcome is to know your customers' expectations. Build a solid reputation by providing ongoing support to clients and helping them to achieve exceptional results for their projects. You have to ensure you receive the best outcome possible, by always using the best quality products. Q: Do you have an internal training scheme or do you outsource training for your employees? A: Training is a big part of our continuous improvement under ISO 9001 requirements. We also have internal training schemes for our employees. Contact Us MISP Pty Ltd Address 22 Brooklyn Avenue Dandenong VIC 3175 Ph: 03 9701 3655 Fax: 03 9701 3656 E-mail misp@bigpond.com.au
UNIVERSITY PROFILE
The University of Auckland, New Zealand Department of Chemical & Materials Engineering of The University of Auckland (UoA) is the leading academic unit of New Zealand in teaching and researching in materials science and engineering. They study metals, electronic materials, energy materials, biomedical materials, food materials, coating and surface engineering. The coating and electrochemistry group led by Prof Wei Gao with three research fellows and 10 PhD students. They develop nano-structured composite coatings, thin films and work on various surface protection/reactions projects. The group has close relationships with the Research Center for Surface and Materials Science, and Light Metal Research Center (LMRC) of UoA. They also established long-term international collaborations with a number of leading research groups at universities and institutes overseas. The group has carried out extensive research on high temperature oxidation, corrosion, protective coatings and surface modification over the last two decades. More than 200 research papers have been published in high-impact international journals. The recent research focuses on processing, property and application of nano composite coatings. Both traditional and novel coating processes are used, including magnetron sputter, electro/electroless deposition, sol-gel process. Particularly, a new technique of adding sol into electrolyte during deposition process has been developed. Some techniques have already been used in industries. Examples of current research in this group are introduced below. • Synthesis of nano composite coatings using a novel sol-enhanced deposition technique, which combines sol-gel method and electrochemical deposition techniques. Coatings including Ni, Ni-P, Ni-B, Ni-Co, Au, Ag and Cu, reinforced with highly dispersive oxide nanoparticles (TiO2, ZrO2, Al2O3) have been developed successfully on substrates of carbon steel, Cu, stainless steels, Al and Mg for different applications. The agglomeration of nano-particles is largely avoided; and significant improvement on the mechanical properties has been achieved. sing hot dipping method to produce U Zn-Al-Mg alloy coatings. It was
discovered that addition of active element Mg results in the formation of a passive layer on coating surface, which much improved corrosion resistance compared with Zn or ZnAl coatings. This new coating has potential applications in perforated plates in civil construction, automobile bodies, etc. sing ion co-discharging technique U to deposit Cu-Bi, Zn-Bi, and Ni- Bi composite coatings. A unique microstructural feature has been observed on the composite coatings due to the insolubility of Bi in the matrices of Cu, Zn or Ni. Optimization of deposition condition, mechanical property and electrochemical behavior of these coatings are the focus of current study on this topic. Synthesis of nanostructured TiO2 film through anodisation of Ti metal or alloys. Ongoing research aims at tuning the surface wettability and optimises physical/photocatalytic reaction based on understanding the morphological evolution and formation mechanisms of anodic TiO2. AA full range of surface wettability, the water contact angle from 2 to 172 degrees has been achieved by precisely tailoring the anodising surface morphology. Also a simple method has been developed to synthesise “black titania” – oxygen deficient TiO2-x, which shows ultra-high absorbance over the full region of solar light, and displayed high photocatalytic activity under visible light. The University and Faculty have facilities for corrosion, oxidation and coating and thin film technologies, including electrochemical analyser, salt fog spray chamber, and various coating processing facilities. The group’s research is also supported by advanced materials/surface characterization and testing instruments, including Environmental SEM, XPS, EDS, XRD, XRF, AFM, HRTEM, Nanowea wear tester, Nano-indentor, DSC and TGA. A new Materials Innovation Center, combining composite coatings and other materials related research groups, will be opened soon in a new campus. This will greatly enhance the ability and extent of materials science and corrosion research at UoA.
Microstructure of sol-enhanced Au-Ni-TiO2 nano-composite coatings, By Y Wang et al.
Nano pores formed inside the hexagonal dimples by Ti anodisation, J Dong et al. In addition to our research activities, the group has served New Zealand local industries extensively, including NZ Steel, Fisher & Paykel Appliances, Fisher & Paykel HealthCare, Rakon, Rigg, Methven Tapware, and Fonterra. We help the industries to develop their corrosion prevention technology, materials characterization and selection, failure analysis and cost reduction. For more information on our research and consulting service please contact Professor Wei Gao on w.gao@auckland.ac.nz.
Professor Wei Gao, Group Leader.
Dr. Balan Zhu, Senior Research Scientist
Dr Yuxin Wang, Research Fellow on composite coatings
Dr Michael Hodgson, Senior Lecturer, light metals and alloys
August 2014 www.corrosion.com.au p.57
TECHNICAL NOTE
Non-Intrusive Inspection (NII) – An effective NII Process Overview Internal Visual Inspection (IVI) has historically been used as the main method for determination of the condition of pressure equipment as part of the integrity management process. IVI can however be a hazardous, time consuming and costly exercise. NonIntrusive Inspection (NII) is increasingly being considered as an alternative to the traditional IVI approach. The benefits of NII in comparison to IVI are significant and include the following. educed production losses associated R with shut-down. educed manpower requirements – R this can lead to reduced shut-down cost and S horter overall shut-down times since greater capacity is available for other tasks. emoval of hazards associated with R man entry of vessels. emoval of the need to clean R vessels internally. It is widely recognised that NII is different in many respects to IVI hence
TOFD SCREENING result composite Corrosion mapping Image.
p.58 CORROSION & MATERIALS
a different approach to planning is needed. For example, while IVI has the capability to detect a range of different defect types without specific knowledge of what to expect, the capability of NII is very much technique driven. Hence an up-front knowledge of what degradation may be present takes on added significance when planning an inspection by NII. This also means that successful NII is very much dependent on knowledge of the capabilities and limitations of available inspection techniques so that the most appropriate is selected. Definition of the inspection requirements is also linked closely to what defects are of concern and what represents a threat to integrity. In order to ensure effective NII, a multidisciplinary approach is required that combines skills and knowledge in corrosion engineering, inspection technology and mechanical integrity. Identification of Vessels for which NII is appropriate Before NII can be carried out on a vessel it is important to establish that the inspection will be capable of providing the necessary level of assurance. There are two main approaches in this respect. Firstly, the assessment can be made using the industry accepted HOIS
NII Decision Guidance that is based on a comparison to IVI. Secondly, in certain situations it is appropriate to make a more quantified assessment to demonstrate that the level of assurance can be achieved. In this approach a probabilistic assessment, including consideration of degradation types, degradation rates, inspection technique performance and mechanical integrity, is used to define the requirements. Corrosion Risk Assessment An understanding of potential degradation mechanisms and their rates is essential to being able to confidently specify NII as an alternative to IVI. In many cases a significantly more detailed corrosion assessment is required prior to NII than would be the norm for management of integrity using IVI as the primary means of inspection. Providing corrosion assessments to the required level of detail is essential. This is achieved through working closely with the asset owner to ensure that all relevant data (including process and inspection history) is included and state of the art corrosion models are applied. Detailed NII planning The NII plan defines the techniques and procedures to be used and
TECHNICAL NOTE
Corrosion mapping image of a vessel. the locations for coverage by each inspection technique. The findings of the corrosion risk assessment together with knowledge of technique capability and limiting conditions are used to define an effective plan for each equipment item considered. This recognises that the requirements must be closely aligned to each specific case. For example, the NII requirements in a situation in which little or no degradation is expected would focus on validating the assumptions of the corrosion assessment, and would be different to those in a situation where there is a reasonable probability of substantive degradation being present. Inspection Techniques Effective NII relies on techniques which include digital collection of data to allow quantitative analysis and validation that the inspection has been performed as per the requirements. There are a range of advanced ultrasonic techniques, covering inspection for corrosion, erosion and cracking, including but not limited to the following. orrosion mapping for detection C and sizing of localised and general wall loss. ime of Flight Diffraction (TOFD) T for detection and sizing of weld cracking and erosion. This technique can also be used for determination
of wall thickness as it allows production of detailed corrosion maps for plate material.
Practice for NII. Statistical analysis of the data collected is therefore a key element of the evaluation.
utomated pulse echo for the A detection and sizing of weld defects. Pulse echo is also effective for the identification of certain pitting mechanisms.
The evaluation includes an assessment, with respect to integrity and remaining life, based on the inspection results. The outcome of the evaluation is, where possible, a justification for replacement or deferment of internal visual inspection.
reeping Head-wave Inspection C Method (CHIME) and Multiskip Shear Wave for the detection of wall loss. These are effective screening techniques that allow rapid coverage of large areas. In addition, there are other techniques including a variety of radiographic and electromagnetic techniques that might be required in an offshore NII program. Evaluation of inspection On completion of an inspection by NII, it is important to evaluate the work carried out to ensure that the requirements of the inspection plan have been met. This includes a detailed review of the work actually achieved against the work scope specified. In addition, evaluation is required to assess the condition of the equipment compared to expectations and previous inspections. Sampling inspection, with less than 100% coverage, is fundamental to the approach in the HOIS Recommended
Summary By working closely with the asset owner to ensure rapid and effective communication of information, an NII program enables the benefits of NII over IVI to be maximised while retaining full confidence in equipment integrity. Sonomatic offers integrity driven inspection solutions with over 30 years’ experience in advanced NDT inspection and delivery of successful NII for over 450 process pressure vessels with major operators. Sonomatic is capable of delivering all stages of NII from identification of suitable vessels and detailed NII assessments through to enactment of the physical inspection phase and evaluation of the achieved inspection to provide a formal decision on replacement or deferment of IVI. Article by Sonomatic Tyron Kimble
August 2014 www.corrosion.com.au p.59
SUPPLIERS & CONSULTANTS
David Pocock MANAGER
HEMPEL A/S 1 Garston Way North Coogee WA 6163 Australia www.hempel.com
Phone: Mobile: Fax: Email:
+61 8 9431 7377 +61 447 600 027 +61 8 9431 7388 phma@hempel.com
For Advertising details, please contact:
Tracey Winn Marketing & Communications Manager The Australasian Corrosion Association Inc Phone: +61 (0)3 9890 4833 Ext. 242 Email: twinn@corrosion.com.au Web: www.corrosion.com.au
Fax: +61 (0)3 9890 7866
22 Irvine Street Bayswater WA 6053 T: 08 9721 2265 F: 08 9271 2235 M: 0409 112 010 E: david@tfgpumpline.com.au www.pumpline.com.au
PHILIP MATHEW Global Business Development Manager Group Marketing
Australia
Russell Fraser Sales Pty Ltd
David Dawson
Phone: 1800-RENT-DH (736 834) Mobile: 0450 008 259 Office: 02 9833 0777 Fax: 02 9833 0700 Email: ddawson@rentdh.com www.rentdh.com
National Sales & Operations Manager
DeHumidification Technologies PTY LTD 6 Warrior Place St Marys NSW 2760 Australia
SWITCH MODE RECTIFIERS SWITCHMONITORING MODE RECTIFIERS REMOTE REMOTE MONITORING MMO ANODES ENGINEERING MMO ANODES SURVEYS / COMMISSIONING ENGINEERING SURVEYS / COMMISSIONING
3C Corrosion Control Company AB Billeberga Station 3C Corrosion Control Company AB P.O Box 72 Station Billeberga SE-268 03 72 Billeberga P.O Box SWEDEN SE-268 03 Billeberga SWEDEN
Phone: +46Phone: 418 411 900 E-mail: +46 418 411 900 info@3ccc.net E-mail: www.3ccc.net info@3ccc.net www.3ccc.net
Original Bumax® Stainless Fasteners: » Bumax® 88 tensile strength to Class 8.8 » Unmatched Corrosion resistance Tel: (02) 8818 0222
www.hobson.com.au
Gianni Mattioli
Operations Manager
Mobile: 0412 360 378 Phone: (03) 9544 9555 Facsimile: (03) 9544 3755 Email: gmattioli@mattiolibros.com.au Web: www.mattiolibros.com.au
Corrosion, Materials Failure & Mould Investigations Remediation Specification, Contract Administration Industrial and Environmental Chemistry Structural and Civil Design for Durability
For Applications in: • Surface preparation and coating • Condensation and corrosion prevention
Contact Dr ANTHEA AIREY BSc(Hons) PhD MBA MRACI CChem email: anthea@atconsulting.com.au ph: 08 92650400 12/18 Harvest Terrace, West Perth WA 6005
Toll free: 1800 008 379 Fax: (02) 88431589 Email: dh.info@munters.com.au www.munters.com.au
TRISTAR AUSTRALIA PTY LTD T:+61 894942151 F:+61 894349206 Website: www.tristar-au.com Email: sales@tristar-au.com
KURT RUSSELL Sales Manager
Abrasive Blast Media Supplier
SUPER GARNET & GEO-BLASTER® Exclusive Distributor for Australia & New Zealand www.mineralscorp.com
AU Free Phone 1800 309 734
sales@industrial-minerals.co.nz NZ Free Phone 0800 646 372
p.66 CORROSION & MATERIALS
SYDNEY Tel: 02 9545 4433 Fax: 02 9545 4218 rfs@rfsales.com.au www.rfsales.com.au
- 3D Laser Scanning - Ultrasonic Thickness Gauges - Holiday Detectors - Coating Thickness Gauges - Pit Gauges, Borescopes, Magnifiers - Surface Replication & much more…
1-3 Commercial Road Notting Hill Victoria 3168 Australia
Manufacturers and Suppliers of: • Dessicant Dehumidifiers • HCU- Humidity Control Units • Temporary Humidity Control Systems
Munters Pty. Limited Sydney – Brisbane – Melbourne
InSPectIon & teStIng equIPment
Sydney | BriSBane | MelBourne | Perth
Manufacturer of: • DIMET Sacrificial Anodes. Design, survey, installation and commissioning of ICCP by NACE certified CP Engineers • MASTERCOTE PTFE Coated, and high grade alloy/ stainless/ high nickel/ super duplex special fasteners (e.g. anchor/stud/hex bolt). A Division of TRI-STAR Industries (Singapore) Website: www.tristar.com.sg Email: sales@tristar.com.sg T: +65 62663636 F: +65 62653635 / 2801
SUPPLIERS & CONSULTANTS
Info@QuestIntegrity.com www.QuestIntegrity.com
CORROSION SPECIALISTS IN: • Energy Plant • Pipelines • Water Chemistry
• Gas Processing/ Petrochemicals • Atmospheric
Leading Suppliers of NDT Equipment for the Corrosion Industry
Cathodic Anodes Australasia
Head Office T +61 7 5476 9788 sales@cathodicanodes.com.au www.cathodicanodes.com.au
Unit 23, 58 Box Rd Taren Point NSW 2229 Tel: 02 9524-0558 • Fax: 02 9524-0560 Email: ndt@ndt.com.au • Web: www.ndt.com.au
ANODE MANUFACTURER siNCE 1984 abn 93 821 370 828 CAA advert 60x40 nov 2012.indd 1
tawfik
tawfik
- Forensic engineering (material failure, safety/accidents, fire)
- Forensic engineering (material failure, safety/accidents, fire)
- Compliance (metal fabrication, quality, fitness for purpose)
- Compliance (metal fabrication, quality, fitness for purpose)
- Material characterisation(metallurgy/corrosion/welding/fatigue)
- Material characterisation(metallurgy/corrosion/welding/fatigue)
Dr David Tawfik — Principal Materials Engineer
Dr David Tawfik — Principal Materials Engineer
Impartial investigation and independent expert witness in:
BEng(Hons) BDes PhD MIEAust CPEng RPEQ
m +61 (0)4 1225 5112 e tawfikd@tawfikgroup.com.au
w w w .taw fikg rou p. co m. a u
Impartial investigation and independent expert witness in:
w w w .taw fikg rou p. co m. a u
tawfik
- Forensic engineering (material failure, safety/accidents, fire)
- Forensic engineering (material failure, safety/accidents, fire)
- Compliance (metal fabrication, quality, fitness for purpose)
- Compliance (metal fabrication, quality, fitness for purpose)
- Material characterisation(metallurgy/corrosion/welding/fatigue)
- Material characterisation(metallurgy/corrosion/welding/fatigue)
Victoria New South Wales Brisbane Western Australia Distributors all States and Auckland N.Z.
Impartial investigation and independent expert witness in:
1300 782 501 1300 782 503
General Manager
Dr David Tawfik — Principal Materials Engineer
Dr David Tawfik — Principal Materials Engineer
m +61 (0)4 1225 5112 e tawfikd@tawfikgroup.com.au
m +61 (0)4 1225 5112 e tawfikd@tawfikgroup.com.au
w w w .taw fikg rou p. co m. a u
w w w .taw fikg rou p. co m. a u
BEng(Hons) BDes PhD MIEAust CPEng RPEQ
Australasian Principal Elcometer Service Centre
Phone: BEng(Hons) BDes PhD MIEAust CPEng RPEQ1300 503 610 Email: sales@phillro.com.au m +61 (0)4 1225 5112 e tawfikd@tawfikgroup.com.au www.phillro.com.au
tawfik
Impartial investigation and independent expert witness in:
31/10/12 12:09 P
BEng(Hons) BDes PhD MIEAust CPEng RPEQ
INTERPROVINCIAL CORROSION CONTROL CO. LTD. Leaders in the Cathodic Protection Industry…Since 1957
SOLID-STATE CATHODIC ISOLATOR® Mitigation Of AC Induced Voltages • Lightning • AC Fault Current
tawfik
Impartial investigation and independent expert witness in:
TEL: 905-634-7751 FAX: 905-333-4313 - Forensic engineering (material failure, safety/accidents, fire)
tawfik
www.cceng.com.au
Cathodic Protection | Integrity Management | Design & Testing | CP Products
Impartial investigation and independent expert witness in:
Sydney | Melbourne | Brisbane | Perth | Townsville | Auckland | New Plymouth
- Forensic engineering (material failure, safety/accidents, fire)
- Compliance (metal fabrication, quality, fitness for purpose) www.Rustrol.com
- Compliance (metal fabrication, quality, fitness for purpose)
- Material characterisation(metallurgy/corrosion/welding/fatigue)
- Material characterisation(metallurgy/corrosion/welding/fatigue)
Dr David Tawfik — Principal Materials Engineer
Dr David Tawfik — Principal Materials Engineer
m +61 (0)4 1225 5112 e tawfikd@tawfikgroup.com.au
m +61 (0)4 1225 5112 e tawfikd@tawfikgroup.com.au
w w w .taw fikg rou p. co m. a u
w w w .taw fikg rou p. co m. a u
BEng(Hons) BDes PhD MIEAust CPEng RPEQ
BEng(Hons) BDes PhD MIEAust CPEng RPEQ
D R MAY Inspections
David May
tawfik
tawfik
- Forensic engineering (material failure, safety/accidents, fire)
- Forensic engineering (material failure, safety/accidents, fire)
- Compliance (metal fabrication, quality, fitness for purpose)
- Compliance (metal fabrication, quality, fitness for purpose)
- Material characterisation(metallurgy/corrosion/welding/fatigue)
- Material characterisation(metallurgy/corrosion/welding/fatigue)
Impartial investigation and independent expert witness in:
Dr David Tawfik — Principal Materials Engineer BEng(Hons) BDes PhD MIEAust CPEng RPEQ
m +61 (0)4 1225 5112 e tawfikd@tawfikgroup.com.au
Welding Supervision Welding Inspection NDT Specialist Coating Inspection Inservice Inspection
Impartial investigation and independent expert witness in:
Geelong Office: 193 Station Street, Corio, Victoria 3214 Australia Postal Address: P.O. Box 1080, Corio, Victoria 3214 Australia Tel: +61 3 5275 3339 Fax: +61 3 5275 0585 Mob: 0412 520 699 Email: dmay@drmay.com.au
Dr David Tawfik — Principal August Materials Engineer 2014 www.corrosion.com.au BEng(Hons) BDes PhD MIEAust CPEng RPEQ
m +61 (0)4 1225 5112 e tawfikd@tawfikgroup.com.au
p.67
SPECIALITY COATINGS BY HEMPEL
WHY CHOOSE HEMPEL? • Over 40 years experience developing and applying specialised coatings that offer maximum protection • Reliable with strong technical support • Efficient systems and solutions for the Power, Oil & Gas and Process industries to reduce maintenance costs As a global manufacturer and supplier of protective coatings, Hempel develops market-leading solutions for the most challenging coating requirements. Our Versiline range has been designed to perform in aggressive environments giving superior protection and minimises the risk of production disruptions keeping your assets and your reputation safe. If you want to know more, please contact us at: protective@hempel.com Toll free 1800-HEMPEL in Australia or 0508-HEMPEL in New Zealand. www.hempel.com/versiline
Trusted in challenging environments