KRIPA SONPAL/INTERNSHIP ARCHITECTURE PORTFOLIO by Kripa Sonpal

RESIDENTIAL PROJECT OF KAKKAD ESTATE, MUMBAI1. 2. 3. 4. 5. 6. CLUBHOUSE AT JANWADA NILESH SHAH RESIDENCE, LONAVALA ASHAY SHAH RESIDENCE AT SATIRJE, ALIBAUG OFFICE EXTERIOR FOR MARWAH, MUMBAI RESIDENCE AT RAHEJA ARTESIA, WORLI

4 PROJECT NAME: KAKKAD ESTATE, GHATKOPAR EAST, MUMBAI PROJECT TYPE: RESIDENTIAL BUILDING

5 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL CUT-OUT FOR VENTILATION CUT-OUT FOR VENTILATION CUT-OUT FOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUT FOR VENTILATION CUT-OUT FOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUT FOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUT FOR VENTILATIONCUT-OUT FOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION RAMP UP FROM BASEMENT RAMP DN TO BASEMENT UPDNUPDN 7.30 MT WIDE 2 WAY RAMP SLOPE 1:10 SPACE FOR SUBSTATION 27'4'' X 12'5'' SPACE FOR OWC 327.22 SQ.FT DNDN RAMP WITH SLOPE 1: 10 CANOPY ABOVE CANOPY ABOVE DECKDECK BUFFET COUNTER & PREPARATION AREA BANQUET (50+ PAX ) ENTRANCE LOBBY ENTRANCE LOBBY 1323.74 SQ FT 1323.74 SQ FT 11'1'' X 10'10'' BUFFET COUNTER & PREPARATION AREA 11'1'' X 10'10'' 1273.37 SQ.FTLIFT 8'10" X 6'11" LIFT 8'10" X 6'11" LIFT 8'10" X 6'11" LIFT METER ROOM 8'6'' X 9'6'' METER ROOM 8'6'' X 9'6'' TOILET 8'4'' X 15'5'' TOILET 8'4'' X 15'5'' GROUND FLOOR PLAN G SR NO. LENGTH X BREADTH AREA BANQUET BUFFET COUNTER BUFFET COUNTER TOILET 1 TOILET 2 ENTRANCE LOBBY ENTRANCE LOBBY 11'1'' 10'10'' 8'4'' 15'5'' 1273.37 (SQ FT) 125.83 125.83 1323.74 1323.74 TOTAL AREA 6,774.12 SQ FT 122.60 11'1'' X 10'10'' 8'4'' 15'5'' 122.60 AMENITIES GROUND FLOOR PLAN KAKKAD ESTATE WORKING DRAWING

6 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL CUT-OUT FOR CUT-OUTFOR VENTILATIONCUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUT FOR CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION CUT-OUTFOR VENTILATION RAMP UP FROM BASEMENT RAMP DN TO BASEMENT DNUP UP UP +0.0M LVL +0.0M LVL +0.45MLVL SPACE FOR SUBSTATION 8.35M X 3.80M SPACE FOR OWC 30.40 SQ.M. NB D.G. SET WILL BE PLACED OVER THE SUBSTATION & OWC DN +0.45MLVL CANOPYABOVE SHAFTSHAFT L0BBYCAR LIFT SHOP TOI. C.A. = 301 SFT SHOP C.A. = 190 SFT SHOP C.A. 252 SFT SHOP C.A. = 301 SFT SHOP C.A. 720 SFTRESTAURANT SECURITY CABIN LANDSCAPE PLANGROUND FLOOR 6.0MWIDEROAD 6MWIDEROAD SECURITY CABIN CANOPY ABOVE DECK 18.0M WIDE RAJAWADI ROAD PLAYCOURT 0.30MLVL SOFTLANDSCAPE 0.15MLVL PAVEDLANDSCAPE +0.30MLVL +0.30MU.F.L. +2.55MU.F.L. WATER- COOLERS WATER-COOLERS 32.290 [105'-9"] 9.700 [31'-9"] 5.170 [16'-11"]10.650 [34'-10 1/2"] 1.750 [5'-9"] 2.000 [6'-6 1/2"] 4.150[13'-7"] 3.685 [12'-1"] 16.235 [53'-2"] 21.800 [71'-41/2"] 1.600[5'-3"] 3.500[11'-5 1/2"] 2.000 [6'-61/2"] 7.850 [25'-81/2"] 3.000 [9'-10"] [4'-11"]1.500 8.600[28'-2"] 1.500[4'-11"] PANTRYPANTRY STACKABLE FURNITURE FOR EVENTS GROUND FLOOR-LANDSCAPE PLAN KAKKAD ESTATE LANDSCAPE PLAN

7 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLE NTS KRIPA SONPAL TERRACE PLAN POSITION OF DUCT CIRCULATION AND GREEN BUFFER ZONING DIAGRAM TERRACE ZONING DIAGRAM AMPHITHEATRE WORKING PODS LIGHT WEIGHT TRELLIS ROOF KAKKAD ESTATE CONCEPTUAL DRAWINGS

FLOOR PLAN 1-SALE BUILDING ESTATE DRAWING

8 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL FLOOR PLAN : 1 1 LOBBY ST 1 LIFT LIFT LIFT DN UP ELEC. SHAFT F.F SHAFT ELEC. SHAFT F.F SHAFT LIFT LIFT DN UP ST 2 LOBBY DRIVERS' ROOM 8'7'' X 14'1'' SOCIETY ROOM 8'7'' X 14'1'' ENTRANCE LOBBY BELOW CANOPY ABOVE CANOPY ABOVE GYMNASIUM TERRACE 2 MASSAGE ROOM 8'4'' X 14'1'' ENTRANCE LOBBY BELOW TOI. CHANGE RM. CONSULTATION TOI.TOI. TERRACE 1 UPPER-LEVEL YOGA AEROBICS TOI. LOCKER ROOMSTRETCHING AREA ATTENDANT'S DESK CARDIO UPPER BODY WORKOUTLOWER BODY WORKOUT 6'0" X 9'10" 8'10" X 6'11" 8'10" X 6'11" 11'9" X 19'11" 6'0" X 8'4" 8'10" X 6'11" 8'10" X 6'11" LIFT 6'0" X 9'10" 6'0" X 8'4" 11'9" X 19'11" 10'4'' X 10'11''4'5'' X 4'11'' 4'11'' X 5'3'' + 4'11'' X 4'3'' 11'1'' X 10'11'' 11'1'' X 10'11'' 4'11'' X 5'3'' + 4'11'' X 4'3'' 10'2'' X 10'11'' 8'2'' X 10'11'' 7'4'' X 8'6'' 21'7'' X 5'7'' + 11'1'' X 6'4'' 21'7'' X 5'7'' 13'11'' X 19'6'' 6'2'' X 13'1'' 43'11'' X 19'6'' SR NO. LENGTH X BREADTH AREA DRIVERS ROOM SOCIETY ROOM YOGA AEROBICS AREA MASSAGE ROOM STRETCHING AREA UPPER BODY WORKOUT LOCKERS ROOM ATTENDANTS DESK CONSULTATION ROOM LOWER BODY WORKOUT GYMNASIUM TERRACE TERRACE COMMON TOILET COMMON TOILET 8'7'' 14'1'' 8'7'' 14'1'' 13'11'' 19'6'' 6'2'' 13'1'' 8'4'' 14'1'' 4'5'' 4'11'' 10'4'' X 10'11'' 11'1'' 10'11'' 11'1'' X 10'11'' 10'2'' 10'11'' 8'2'' 10'11'' 7'4'' 8'6'' 43'11'' X 19'6'' 21'7'' X 5'7'' 11'1'' 6'4'' 21'7'' X 5'7'' 6'0" X 8'4" 124.32 (SQ FT) 386.63 160.05 113.55 122.60 113.55 91.92 71.25 864.34 192.35 120.98 71.79 TOTAL AREA 2,852.45 SQ FT ATTACHED TOILET 1 4'11'' X 5'3'' 4'11'' X 4'3'' 50.37 ATTACHED TOILET 2 6'0" X 8'4" 4'11'' X 5'3'' 4'11'' X 4'3'' 124.32 122.60 71.79 50.37 AMENITIES

KAKKAD

WORKING

4BHK

MASTER SUITE 11'9" X 22'8" JR. MASTER SUITE 11'9" X 21'8" BEDROOM 2 14'11'' X 11'5''

LIVING ROOM 15'10" X 21'11"

DINING ROOM 11'8" X 11'9"

UTILITY 6'7" X 5'3" KITCHEN 9'2" X 14'9" + 6'5" X 4'3"

SERV. ROOM 11'5" X 5'5"

DINING ROOM 11'8" X 11'9" 11'11" X 6'4" 11'11" X 6'4"

TOILET

VERANDAH 9'10" X 5'7"

BEDROOM 2 11' X 14'7"

TOILET 9'0" 5'6" BEDROOM 1 11'9" X 16'5"

LIVING ROOM 15'10" X 21'11" VERANDAH 15'10" X 5'10"

MASTER SUITE 11'9" X 22'8"

TOILET 11'11" X 6'4"

3BHK 3BHK 9'0" 5'6" 5'3" X 5'6" 9'0" 5'6" 11'11" X 6'4" 6'0" X 9'10" 20'6" X 15'6" 8'10" X 6'11" 8'10" X 6'11"

TOI. 6'2" X 5'5"

MASTER SUITE 11'6" X 15' + 5'2" X 6'6"

BEDROOM 1 11'6" X 13'7" TOI. 5'3" X 5'6"

TOILET 11'11" X 6'4"

LIVING ROOM 14' X 19'6"

DINING ROOM 11'8" X 11'9" KITCHEN 8'4" X 12'9" + 1'7" X 5'5"

TOILET 11'11" X 6'4" 6'0" X 9'10" 20'6" X 15'6" 8'10" X 6'11" 8'10" X 6'11"

UTILITY 7' X 3'11"

FOYER 11'4" X 5'7"

UTILITY 6'7" X 5'3" KITCHEN 9'2" X 14'9" + 6'5" X 4'3" POOJA ROOM 4'3" X 4'3"

DINING ROOM 11'8" X 11'9"

TOI. 5'3" 5'6" TOILET 9'0" X 5'6" BEDROOM 2 14'11'' X 11'5'' TOILET 11'11" X 6'4" SUITE 11'9" X 21'8"

4BHK

SERV. ROOM 11'5" X 5'5" TOI. 6'2" X 5'5"

9 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM - UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL POOJA ALCOVE FOYER VERANDAH 9'10" X 5'7" POOJA ALCOVE TOILET TOILET TOILET TOI. LIVING ROOM 14' X 19'6" BEDROOM 1 11'6" X 13'7" BEDROOM 2 11' X 14'7" MASTER SUITE 11'6" X 15' + 5'2" X 6'6" KITCHEN 8'4" X 12'9" + 1'7" X 5'5" UTILITY 7' X 3'11" 2 FLOOR PLAN : 2 ST 2 LOBBY LIFT LIFT LIFT ELEC. SHAFT F.F SHAFT DN UP ST 1 UP LOBBY ELEC. SHAFT F.F SHAFT LIFT LIFT LIFT DN BEDROOM 1 11'9" X 16'5" TOILET FOYER 11'4" X 5'7" POOJA ROOM 4'3" X 4'3" TOILET TOILET TOI. TOILET

VERANDAH

JR. MASTER

SR NO. LENGTH X BREADTH AREA LIVING ROOM DINING ROOM BEDROOM 1 BEDROOM 2 MASTER SUITE KITCHEN UTILITY ATTACHED TOILET 1 ATTACHED TOILET 2 MASTER SUITE TOILET POWDER TOILET POOJA FOYER 14' X 9'6" 11'8" 11'9" 11'6" 13'7" 11' X 14'7" 11'6" X 15' + 5'2" X 6'6" 8'4" 12'9" 1'7" X 5'5" 7' X 3'11" 11'11" X 6'4" 2'11" 1'11" 11'4" X 5'7" 11'11" 6'4" 301.28 (SQ FT) 118.94 SR NO. LENGTH X BREADTH AREA LIVING ROOM DINING ROOM BEDROOM 1 BEDROOM 2 MASTER SUITE KITCHEN UTILITY SERVANTS ROOM SERVANTS TOILET JR MASTER SUITE ATTACHED TOILET ATTACHED TOILET MASTER SUITE TOILET JR MASTER SUITE TOILET POWDER TOILET POOJA FOYER 15'10" 21'11" 11'8" 11'9" 11'9" X 16'5" 14'11" 11'5" 11'9" 22'8" 11'9" 21'8" 8'4" 12'9" 1'7" 5'5" 6'7" X 5'3" 11'5" 5'5" 6'2" 5'5" 11'9" 22'8" 11'11" X 6'4" 5'3" 5'6" 4'3" 4'3" 11'4" 5'7" 9'0" X 5'6" 9'0" X 5'6" 380.50 (SQ FT) 185.24 216.13 172.43 268.34 256.71 164.90 34.44 67.16 34.76 51.66 78.46 71.14 30.13 18.19 63.78 4BHK : CARPET AREA = 2,145 SFT + 94 SFT (BALCONY) = 2,239 SFT TOTAL AREA 11'11" 6'4" 5'3" 5'6" 2'11" X 1'11" FOYER 9'7" X 5'1" TOTAL AREA 1343 + 55 SFT (BALCONY)=1398 SQ FT 158.33 168.45 210.64 118.86 22.77 49.08 31.86 5.70 51.48 47.36 52.52 51.23 2145 94 SFT (BALCONY)=2239 SQ FT 3BHK CARPET AREA = 1,343 SFT + 55 SFT (BALCONY) = 1,398 SFT FLOOR PLAN 2-SALE BUILDING KAKKAD ESTATE WORKING DRAWING

GROUND FLOOR PLAN-TENANT BUILDING ESTATE DRAWING

10 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL GROUND FLOOR PLAN G LIFT LIFT LIFT LIFTELEC. SHAFT FF SHAFT ELEC. SHAFT FF SHAFT RESTAURANT 28'6'' X 21'9'' + SHOP 4 10' X 26'9'' SHOP 3 15'1'' X 21'9'' SHOP 2 15'3'' X 21'9'' SHOP 1 10' X 21'9'' TOI. TOI. TOI. TOI. TOI. UP CLINIC 20'3'' X 16'3'' ENTRANCE LOBBY 15'11'' X 9'8'' LOBBY LOBBY BASEMENT VENTILATION CUT-OUT BASEMENT VENT. CUT-OUT ST2 ST1 TOI. SHOP 5 STORE METER ROOM 20'6'' X 9'2'' SOCIETY ROOM 15'3'' X 14'5'' STORE TOILET UP DNUP CANOPY ABOVE CAR LIFT 9'2'' X 14'5'' BASEMENT VENT. CUT-OUT 10'4'' X 4'5'' 8'1'' X 4'3'' 4'7'' X 9'8'' 4'11'' X 4'7'' 5'5'' X 4'7'' 4'11'' X 4'11'' 4'7'' X 5'6'' 4'3'' X 5'3'' 4'11'' X 5'9'' 4'11'' X 4'11'' + 3'11'' X 4'11'' SR NO. LENGTH X BREADTH AREA CLINIC METER ROOM SOCIETY ROOM 20'3'' X 16'3'' 20'6'' X 9'2'' 15'3'' X 14'5'' 8'1'' X 4'3'' 292.34 (SQ FT) 179.32 214.41 TOTAL AREA 2,666.77 SQ FT SHOP 10' X 21'9'' 172.97 SHOP 15'3'' X 21'9'' 287.82 RESTAURANT 28'6'' X 21'9'' 9'2'' X 14'5'' 710.20 8'10'' X 6'6'' 8'10'' X 6'6'' 8'10'' X 6'6'' 8'10'' X 6'6'' SHOP SHOP SHOP ATTACHED TOILET ATTACHED TOILET ATTACHED TOILET ATTACHED TOILET COMMON TOILET RESTAURANT TOILET CLINIC TOILET STORE ROOM 15'1'' X 21'9'' 10' X 26'9'' 10'4'' X 4'5'' 4'3'' X 5'3'' 4'7'' X 5'6'' 4'11'' 4'11'' 5'5'' X 4'7'' 3'11'' X 4'11'' 4'11'' 5'9'' 4'11'' 4'7'' 4'7'' X 9'8'' 4'11'' 4'11'' 287.71 232.71 48.11 23.19 24.89 25.07 25.83 46.06 26.58 23.41 46.17 AMENITIES

KAKKAD

WORKING

UNIT

UNIT TYPE-

UNIT

UNIT TYPE- 5 (345 SFT C.A.) DRAWING

11 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL 1ST FLOOR PLAN 1 TERRACE 20'8'' X 19'3'' TOILET 5'3'' X 4'3'' + 3'3'' X 4'11'' MULTI-ROOM 15'1'' X 9'2'' CANOPY TOILET 5'3'' X 3'1'' + 3'3'' X 4'11'' MULTI-ROOM 15'1'' X 9'2'' MULTI-ROOM 10'X 17''' + 2'3'' X 9'2'' BATH BEDROOM 10' x 9'9'' TOILET 8' X 4'7'' MULTI-ROOM 13'10'' X 10' + 5'6'' X 5'3'' BEDROOM 13'10''X 10' RESTAURANT 31' X 19'3'' MULTI-PURPOSE ROOM 7'2'' X 14'8'' TOI. DN SLAB SUNK BY 600MM TOILET 8' X 4'7'' MULTI-ROOM 13'10'' X 10' + 5'6'' X 5'3'' BEDROOM 13'10'' X 10' CUTOUT FOR VENTILATION F.F SHAFT ELEC. SHAFT LOBBY UP DN F.F SHAFT ELEC. SHAFT LOBBY DNUP LIFT LIFT LIFT LIFT ST 2 ST1

5 (345 SFT C.A.)

TYPE- 6 (355 SFT C.A.)

TYPE- 1 (180 SFT C.A.)

1 (180 SFT C.A.) TOILET 6' X 4'7'' 5'2'' X 4'3'' 8'10'' X 6'6'' 8'10'' X 6'6'' 8'10'' X 6'6'' 8'10'' X 6'6'' SR NO. LENGTH X BREADTH AREA MULTIROOM TOILET 15'1'' 9'2'' (SQ FT) TOTAL AREA 180 SQ FT 5'3'' 3'1'' 3'3'' 4'11'' SR NO. LENGTH X BREADTH AREA MULTIROOM BEDROOM TOILET 13'10'' 10' 5'6'' 5'3'' 13'10''X 10' 4'7'' 168.63 (SQ FT) 138.7 37.67 TOTAL AREA 345 SQ FT SR NO. LENGTH X BREADTH AREA MULTIROOM BEDROOM TOILET 13'10'' 10' 5'6'' 5'3'' 13'10''X 10' X 4'7'' 206.49 (SQ FT) TOTAL AREA 355 SQ FT BATH 5'2'' 4'3'' 23.14 148 32

FIRSTFLOOR PLAN-TENANT BUILDING KAKKAD ESTATE WORKING

12 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL AREA OF SCREENING = 1,416.04 SQ.M. AREA OF LOUVERS = 230.01 SQ.M. ADDITIONAL AREA OF SCREENING = 354.87 SQ.M. NET AREA OF SCREENING = 3,013.47 SQ.M. (32,436.72 SFT) NET AREA OF LOUVERS = 1,496.30 SQ.M. (16,106.03 SFT) ADDITIONAL AREA OF LOUVERS = 393.57 SQ.M. 181.02 61.7 104.43 4.51 95.31 119 67.74 151.71 61.13 95.19 164.85 56.21 4.51 20.18 65.50 15.68 19.37 3.18 39.37 4.13 AREA OF SCREENING = 410.26 SQ.M. AREA OF LOUVERS = 15.79 SQ.M. 115 153.44 63.13 37.09 34.83 3.16 3.16 3.16 3.16 3.01 AREA OF SCREENING = 419.81 SQ.M. AREA OF LOUVERS = 9.47 SQ.M. AREA OF SCREENING = 412.48 SQ.M. AREA OF LOUVERS = 847.46 SQ.M. CANOPY 4.850 W15 FD2A W15A W15A FD2A W4 21 22 23191715141210 GROUND FLOOR +0.60M LVL +4.60M LVL +8.60M LVL +12.30M LVL 4TH FLOOR 5TH FLOOR +19.70M LVL 6TH FLOOR 7TH FLOOR 8TH FLOOR +30.80M LVL +34.50M LVL +38.35M LVL 11TH FLOOR +42.20M LVL 12TH FLOOR TERRACE LVL OHT LVL +55.05M LVL W2 W4B W4B GROUND FLOOR +0.60M LVL +4.60M LVL 2ND FLOOR +8.60M LVL 4TH FLOOR 5TH FLOOR +23.40M LVL 7TH FLOOR +27.10M LVL 8TH FLOOR 9TH FLOOR 10TH FLOOR +42.20M LVL 12TH FLOOR +49.90M LVL +52.85M LVL OHT LVL +55.05M LVL GROUND FLOOR +0.60M LVL +0.00M LVL 1ST FLOOR 3RD FLOOR +16.00M LVL 5TH FLOOR +19.70M LVL 6TH FLOOR 7TH FLOOR +27.10M LVL +30.80M LVL +34.50M LVL 10TH FLOOR +38.35M LVL 11TH FLOOR +46.05M LVL 12TH FLOOR +49.90M LVL TERRACE LVL OHT LVL +55.05M LVL EA (HEIGHT OF BUILDING W.R.T. 0.0M LVL) APPROVED CANOPY REFER GLAZING DETAIL 212223 19 17 15 14 12 1018 1620 13 11 4 +0.60M LVL 1ST FLOOR 2ND FLOOR +12.30M LVL 4TH FLOOR 5TH FLOOR +19.70M LVL 6TH FLOOR 8TH FLOOR +30.80M LVL 9TH FLOOR 10TH FLOOR +42.20M LVL +46.05M LVL 12TH FLOOR +49.90M LVL TERRACE LVL OHT LVL +55.05M LVL CANOPY GLAZING GLAZINGRAILING PER DETAIL RAILING PER DETAIL KAKKAD ESTATE WORKING DRAWING

13 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL KAKKAD ESTATE LANDSCAPE VIEWS

14 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL KAKKAD ESTATE TERRACE VIEW

15 PROJECT NAME: CLUBHOUSE AT JANWADA, HYDERABAD PROJECT TYPE: RESIDENTIAL

16 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL Nehru outer ring road HYDERABAD School District SITE Bus stop (2 km) Bus stop (1.1 km) GVR garden MVS farms Connecting roads around the site Main link Road( Shankarpalli road) MAXIMIZING THE GREEN COVER SITE LOCATION ENCOURAGING THE USE OF ONSITE RENEWABLE ENERGY CREATING WATER RESERVIORS ON SITE JANWADA LOCATION AND CONCEPT

17 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL Lowest Point 557m Highest Point 575m Lowest Point 555m Highest Point 575m CONTOURS AND TERRAIN ON SITE JANWADA SITE CONTOURS

18 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL 2.18 acres (8819 sq m) PLOT NO. 2.65 acres (10738 sq m) PLOT NO. 2.07 acres (8405.20 sq m) PLOT NO. 1.00 acres (4072.62 sq m) PLOT NO. 0.99 acres (4012.67 sq m) PLOT NO. 10 1.15 acres (4639.39 sq m) PLOT NO. 11 1.34 acres (5423.19 sq m) PLOT NO. 12 1.59 acres (6446.40 sq m) PLOT NO. 13 1.43 acres (5791.47 sq m) PLOT NO. 14 1.28 acres (5189.31 sq m) PLOT NO. 15 1.25 acres (5052.56 sq m) PLOT NO. 16 1.20 acres (4873.33 sq m) PLOT NO. 17 0.92 acres (3709.31 sq m) PLOT NO. 18 0.89 acres (3612.84 sq m) PLOT NO. 19 0.86 acres (3496.71 sq m) PLOT NO. 20 4.77 acres (19309.02sq m) PLOT NO. 21 3.17 acres (12844.87 sq m) PLOT NO. 22 2.67 acres (10815.92 sq m) PLOT NO. 23 3.30 acres (13342.51 sq m) PLOT NO. 24 2.90 acres (11718.24 sq m) PLOT NO. 25 2.27 acres (9193.84 sq m) PLOT NO. 26 1.07 acres (4043.07 sq m) PLOT NO. 27 1.28 acres (5160.39 sq m) PLOT NO. 28 1.05 acres (4237.35 sq m) PLOT NO. 29 1.03 acres (4169.41 sq m) PLOT NO. 30 1.03 acres (4169.41 sq m) PLOT NO. 31 0.70 acres (2850.36 sq m) PLOT NO. 32 1.49 acres (6019.71sq m) PLOT NO. 33 2.72 acres (11006.62 sq m) PLOT NO. 34 1.40 acres (5693.38 sq m) PLOT NO. 35 1.10 acres (4474.07 sq m) PLOT NO. 36 0.91 acres (3690.71 sq m) PLOT NO. 37 0.95 acres (3854.53 sq m) PLOT NO. 38 1.19 acres (4806.30 sq m) PLOT NO. 39 1.19 acres (4855.80 sq m) PLOT NO. 40 1.74 acres (7031.63sq m) PLOT NO. 41 1.50 acres (6050.45 sq m) PLOT NO. 42 1.28 acres (5194.84 sq m) PLOT NO. 43 1.33 acres (5374.23 sq m) PLOT NO. 44 1.14 acres (4629.34 sq m) PLOT NO. 45 3.01 acres (12196.45 sq m) PLOT NO. 46 1.33 acres (5399.27 sq m) PLOT NO. 47 1.38 acres (5580.37 sq m) PLOT NO. 48 1.81 acres (7330.74 sq m) PLOT NO. 49 1.07 acres (4330.69 sq m) PLOT NO. 501.06 acres (4304.87 sq m) PLOT NO. 51 1.48 acres (5994.19 sq m) PLOT NO. 52 1.17 acres (4740.62 sq m) PLOT NO. 53 1.17 acres (4761.22 sq m) PLOT NO. 54 1.17 acres (4752.79 sq m) PLOT NO. 55 1.34 acres (5426.50 sq m) PLOT NO. 56 1.16 acres (4720.69 sq m) PLOT NO. 57 1.07 acres (4337.05 sq m) PLOT NO. 58 1.04 acres (4219.89 sq m) PLOT NO. 59 0.83 acres (3370.01 sq m) PLOT NO. 60 TYPE A > 2.5 ACRES 12 NO.S TYPE B 1- 2.49 ACRES - 40 NO.S TYPE C < 1 ACRES - 8 NO.S Individual plot areas not updated as per new road AREA GAINED = 357.35 SQM AREA LOST = 347.75 SQM NET GAIN = 9.6 SQM VEHICULAR MOVEMENT KEY ` PLOTTING DIAGRAM SEGMENTAL DIAGRAM- LANDSCAPE SEGMENTAL DIAGRAM- VEHICULAR MOVEMMENT JANWADA ZONING DIAGRAM

19 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL TYPE A (> 2.5 acres 12 NO.S) TYPE B (1 2.49 acres 40 NO.S) TYPE C (< 1 acres 8 NO.S) CENTRAL LUNG SPACE CLUBHOUSE (6.09 acres) TYPE A TYPE A TYPE A TYPE A TYPE A TYPE A TYPE A TYPE A TYPE A TYPE A TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE C TYPE C TYPE C TYPE C TYPE C TYPE B TYPE B TYPE B TYPE C TYPE B TYPE B TYPE C TYPE B TYPE B TYPE A TYPE C TYPE A CLUBHOUSE CENTRAL LUNG SPACE MASTER PLAN JANWADA MASTER PLAN

20 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL PLOT 1 PLOT 2 EAST WEST ENTRY POINTS ENTRANCE COURTPEDESTRIAN PATHWAY GREEN BUFFERELEMENT OF SURPRISE JANWADA ENTRY OF PLOTS

21 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL 2.0 m 2.0 m Cycling Track Jogging Track Buggy Lane PlotPlot Green Buffer Green Buffer 2.5 m 2.0 m 3.5 m PLOTPLOT JANWADA SITE SECTION

22 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL JANWADA HOUSE PROTOTYPES

23 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL JANWADA HOUSE PROTOTYPES

24 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL TYPE A (> 2.5 acres 12 NO.S) TYPE B (1 2.49 acres 40 NO.S) TYPE C (< 1 acres- 8 NO.S) CENTRAL LUNG SPACE CLUBHOUSE (6.09 acres) TYPE A TYPE A TYPE A TYPE BTYPE BTYPE BTYPE BTYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE C TYPE B TYPE B TYPE B TYPE B TYPE BTYPE B JANWADA NEW MASTER PLAN

25 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL TYPE A (> 2.5 acres 12 NO.S) TYPE B (1 2.49 acres 40 NO.S) TYPE C (< 1 acres 8 NO.S) CENTRAL LUNG SPACE CLUBHOUSE (6.09 acres) TYPE A TYPE A TYPE A TYPE BTYPE BTYPE BTYPE BTYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE B TYPE C TYPE B TYPE B TYPE B TYPE B TYPE BTYPE B JANWADA NEW MASTER PLAN

26 PROJECT NAME: NILESH SHAH PROJECT TYPE: RESIDENTIAL PROJECT (HOLIDAY HOME)

27 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL THROOM DECK 18'7" BEDROOM DECK +4.45 +4.45 +4.45 WIW CHANGING SWIMMING Proposed Residence for Nilesh Shah FOREST LAND Mahindra Club POOLDECK POOL JACCUZI 0.15 LIVING LIFT PWDR DINING ROOM KITCHEN 11.5 32'1" BEDROOM HROOM +4.35 WIW BATHROOM 3.55 BEDROOM THROOM DECK ROOM BATHROOM BEDROOM DECK 0.45 BEDR -5.5 BATHROOM STO FILTRATION UNIT DECK BEDROOM ROOM 1 2 2' 3 3' 7' 4' 4 5' 6 6' 7 10' 10 9 11 14' 14 15'15 16 16' 14 1' 8' 8 9' 11' 11 11' 12' 12 13' 13 14' 1 1' 4 4' 6' 6 2 2' DG LEGEND 01. Parking 02. Drop off 03. Entrance court 04. Verandah 05. Dining 06. Powder room 07. Kitchen 08. Staff/Catering court/Utility 09. Bed room 10. Living room 11. Pool deck 12. Swimming pool 13. Change room 14. Massage room&steam room 15. Multipurpose Room 16. MEP Services 17. Driver and staff quarters (above parking with containers) 18. Day Resting & Care Taker's Area 19. Maid's Room and linen room 02 03 04 05 06 06 08 09 09 09 09 10 11 12 13 14 16 17 18 19 01 01 04 07 09 09 09 0909 15 B01-DECK BEDROOMSTORAGE CATERING UTILITY RESTDAY RESTAREA Plot Boundary as per New Demarcation (4 acres) Plot Boundary as per Survey NILESH SHAH NEW MASTER PLAN

28 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL SLEEPING AREA 2.3 m 5.8 m UP UP 1,0001,000 2,400 6,100 2,400 2,400 1,000 PASSAGE 2.3 m X 5.8 m PASSAGE TERRACE TERRACETERRACE STORAGE 2.9 m 4.7 m TOILET 2.9 m X 2.3 m 2,400 3,100 1,200 1,200 PARKING AREA 5.8 m 2.3 m PARKING AREA 5.8 m X 2.3 m PARKING AREA 5.8 m X 4.7 m TOILET 1 2.2 m X 2.3 m TV ROOM & SITTING AREA 3.5 m X 5.95 m SLEEPING AREA 2.3 m 5.8 m SLEEPING AREA 2.3 m X 5.8 m SLEEPING AREA 2.3 m X 5.8 m TOILET 2.9 m X 2.3 m KITCHEN 5.9 m X 2.3 m STORAGE 5.9 m 2.3 m ELECTRICAL & METER ROOM 5.9 m X 4.5 m SUBSTATION 4.7 m X 4.7 m STABILISER 4.7 m X 3.8 m A B C D E F G H J 1 2 3 4 5 6 7 8 9 1,500 1,200 3,700 1,000 1,200 1,100 1,100 1,200 4,700 16,800 2,300 1,400 2,400 2,300 7,300 4,700 1,400 2,700 24,500 +0.45 m +0.45 m +0.45 m +0.45 m +0.45 m +0.45 m +0.45 m +0.45 m +0.45 m +0.45 m 5,800 4,700 1,300 0,900 2,400 6,100 2,400 1,200 2,400 5,800 3,400 6,100 3,800 0,900 3,7001,400 1,300 4,800 3,800 4,700 3,900 4,000 9,000 5,000 1,400 5,400 4,900 4,2004,600 2,300 2,400 1,300 2,000 1,100 6,200 0,900 3,700 A B C D E F G H J 1 2 3 4 5 6 7 8 9 1,500 1,200 3,700 1,000 1,200 1,100 1,100 1,200 4,700 16,800 2,300 1,400 2,400 2,300 7,300 4,700 1,400 2,700 24,500 DECK 3.4 m 5.8 m 6,100 2,0000,9000,700 1,300 1,100 1,100 1,300 2,0000,900 1,800 3,500 2,000 2,000 2,000 +3.05 m 2,300 1,400 2,200 6,100 4,900 +3.05 m +3.05 m+3.05 m +3.05 m +3.05 m +3.05 m +3.05 m 1514131211 10 3130292827 26 25 24 23 22 21 20 18 17 TV-AREA KITCHEN W STORAGE PARKING W TOI-1 W PARKING W PARKING STORAGE PASSAGEDECK SLEEPING-AREA SLEEPING-AREA SLEEPING-AREA SLEEPING-AREA W TOI-3 TOI-2 W PUMP ROOM 4.8 m X 6.0 m +0.45 m 16 32 STORAGE STORAGE STORAGE W STORAGE TERRACE TERRACE TERRACE 6,100 2,400 TERRACE TERRACE 2,900 2,200+5.65 m TERRACE TERRACE SECONDFLR-AREA W DOWN 1,000 1,000 3130292827 26 25 24 23 22 21 20 19 18 17 32 DECK 2.4 m X 1.8 m +5.65 m 2ND Floor Lvl LEGEND(FINISHES) NILESH SHAH TYPICAL FLOOR PLANS

29 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL SLEEPING AREA 2.3 m 5.8 Ground Floor Plan 1ST Floor Lvl UP UP PASSAGE 2.3 X 5.8 m PASSAGE TERRACE TERRACETERRACE STORAGE 2.9 X 4.7 m TOILET 2 2.9 m X 2.3 m PARKING AREA 5.8 m X 2.3 m PARKING AREA 5.8 m 2.3 PARKING AREA 5.8 m 4.7 TOILET 1 2.2 2.3 m TV ROOM & SITTING AREA 3.5 m X 5.95 m SLEEPING AREA 2.3 m X 5.8 m SLEEPING AREA 2.3 m X 5.8 m SLEEPING AREA 2.3 m 5.8 m TOILET 2.9 m X 2.3 m KITCHEN 5.9 m X 2.3 m STORAGE 5.9 m 2.3 m A B C D E F G H 2 3 5 6 7 8 9 1,500 1,200 3,700 1,000 1,200 1,100 1,100 1,200 4,700 16,800 2,300 1,400 2,400 2,300 7,300 4,700 1,400 2,700 24,500 A B C D E F G H J 1 2 3 4 5 6 7 8 9 1,500 1,200 3,700 1,000 1,200 1,100 1,100 1,200 4,700 16,800 2,300 1,400 2,400 2,300 7,300 4,700 1,400 2,700 24,500 DECK 3.4 m X 5.8 m 151211 10 31302927 23 22 21 20 19 16 32 TERRACE TERRACE DOWN 1,000 1,000 31302927 26 25 24 23 22 21 20 19 DECK 2.4 m X 1.8 m +5.35 m 2ND Floor Lvl NILESH SHAH ELECTRICAL PLAN

30 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL SLEEPING AREA 2.3 X 5.8 m Ground Floor Plan 1ST Floor Lvl UP UP PASSAGE 2.3 m 5.8 PASSAGE TERRACE TERRACETERRACE STORAGE 2.9 m 4.7 m TOILET 2.9 m X 2.3 m PARKING AREA 5.8 m 2.3 m PARKING AREA 5.8 m 2.3 m PARKING AREA 5.8 m X 4.7 m TOILET 2.2 m X 2.3 m TV ROOM & SITTING AREA 3.5 m 5.95 m SLEEPING AREA 2.3 X 5.8 m SLEEPING AREA 2.3 m 5.8 m SLEEPING AREA 2.3 m 5.8 m TOILET 2.9 m 2.3 m KITCHEN 5.9 m 2.3 m STORAGE 5.9 m X 2.3 m A B C D E F G H J 1 2 3 4 5 6 7 8 9 1,500 1,200 3,700 1,000 1,200 1,100 1,100 1,200 4,700 16,800 2,300 1,400 2,400 2,300 7,300 4,700 1,400 2,700 24,500 A B C D E F G H J 1 2 3 4 5 6 7 8 9 1,500 1,200 3,700 1,000 1,200 1,100 1,100 1,200 4,700 16,800 2,300 1,400 2,400 2,300 7,300 4,700 1,400 2,700 24,500 DECK 3.4 m X 5.8 m 1514131211 10 31302827 26 25 24 23 22 21 20 19 18 17 3216 NILESH SHAH PLUMBING PLAN

31 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL SLEEPING AREA 2.3 m X 5.8 m Ground Floor Plan 1ST Floor Lvl UP UP PASSAGE 2.3 m X 5.8 m PASSAGE TERRACE TERRACETERRACE STORAGE 2.9 m X 4.7 m TOILET 2.9 m 2.3 m PARKING AREA 5.8 2.3 m PARKING AREA 5.8 m X 2.3 m PARKING AREA 5.8 X 4.7 m TOILET 2.2 m X 2.3 m TV ROOM SITTING AREA 3.5 m X 5.95 m SLEEPING AREA 2.3 m X 5.8 m SLEEPING AREA 2.3 m 5.8 m SLEEPING AREA 2.3 X 5.8 m TOILET 2 2.9 m X 2.3 m KITCHEN 5.9 m 2.3 m STORAGE 5.9 X 2.3 m A B C D E F G H J 1 2 3 4 5 6 7 8 9 1,500 1,200 3,700 1,000 1,200 1,100 1,100 1,200 4,700 16,800 2,300 1,400 2,400 2,300 7,300 4,700 1,400 2,700 24,500 A B C D E F G H 1 2 3 4 5 6 7 8 9 1,500 1,200 3,700 1,000 1,200 1,100 1,100 1,200 4,700 16,800 2,300 1,400 2,400 2,300 7,300 4,700 1,400 2,700 24,500 DECK 3.4 m 5.8 m TV-AREA KITCHEN STORAGE W PARKING TOI-1 W PARKING PARKING STORAGE DECK SLEEPING-AREA SLEEPING-AREA TOI-3 TOI-2 15141312 312927 26 25 24 23 22 21 20 19 18 17 32 STORAGE STORAGE STORAGE ELECTRICAL & METER ROOM 5.9 m X 4.5 m SUBSTATION 4.7 4.7 STABILISER 4.7 m X 3.8 m PUMP ROOM 4.8 6.0 TERRACE TERRACETERRACE TERRACE TERRACE SECONDFLR-AREADOWN1,000 3130292827 24 23 22 20 19 18 17 32 DECK 2.4 m 1.8 m +5.35 m 2ND Floor Lvl IPS Flooring Marine Ply with Laminate Vitrified Tiles/Vinyl 12mm Plaster with Paint 1 2 3 4 5 Wooden Flooring LEGEND(FINISHES) NILESH SHAH FLOORING PLAN

32 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL SECTION 11' SECTION 22' SLEEPING SPACE SLEEPING SPACE TOILET TV ROOM & SITTING AREA PARKING SPACE PARKING SPACE PARKING SPACE PARKING SPACE PASSAGE TOILET 0.15m 2.75m 5.35m 0.15m 2.75m 5.35m 5 6 7 8 9 A C F G H I J 2,600 2,600 2,500 1,500 2,500 2,600 2,500 2,300 2,3002,300 2,400 2,6002,300 2,300 2,3002,300 2,300 2,400 1,400 2,300 2,700 5,900 1,100 1,100 1,200 4,700 PUMP ROOM3,000 19 21 23 18 20 22 24 2,400 NILESH SHAH SECTION

33 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL ELEVATION 1 ELEVATION 2 2,600PARKING AREA 2,600 2,500 1,000 2,600 3,700 2,600 2,600 2,600 2,600 2,600 2,600 1,000 1,000 TOILET TV ROOM AND SITTING AREA STORAGE SLEEPING AREA SLEEPING AREASTORAGE SLEEPING AREA SLEEPING AREA SLEEPING AREA SLEEPING AREA STORAGE PARKING AREA PARKING AREA 0.15m 2.75m 5.35m 0.15m 2.75m 5.35m CA D I 9 7 6 5 4 3 2 1 J 2,700 3,500 5,900 4,700 3,700 2,400 2,300 7,300 4,700 1,400 2,700 TERRACETERRACE TERRACE TERRACETERRACE DECK DECK KITCHEN NILESH SHAH ELEVATION

34 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL ELEVATION 3 ELEVATION 4 2,600 2,600 2,600 1,400 2,600 2,600 2,600 2,600 2,600 1,000 2,600 SLEEPING AREA SLEEPING AREASTORAGE STORAGE PARKING AREA PARKING AREA PASSAGE TOILET STORAGE SLEEPING AREA SLEEPING AREA STORAGE 0.15m 2.75m 2.75m 5.35m 5.35m 0.00m 1 3 4 5 6 7 9 J I G E D 4,100 4,700 7,300 2,300 2,400 3,700 4,900 2,400 2,400 1,100 NILESH SHAH ELEVATIONS

35 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL UP 3130292827 26 25 24 23 22 21 20 19 18 17 DOWN FIRST FLOOR LVL SECOND FLOOR LVL UP 15141312 11 10 9 8 7 6 5 4 3 2 1 GROUND FLOOR LVL 16 32 3130292827 26 25 24 23 22 21 20 19 18 17 32 SECTION 1 2 5 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 NILESH SHAH STAIRCASE DETAIL

36 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL 0,600 1,200 0,500 0,600 0,900 0,500 1,100 0,400 1,000 1,200 0,500 0,9002,100 1,300 0,500 1,900 0,600 1,100 1,100 0,600 0,600 0,200 0,200 2,400 1,400 1,000 1,6001,400 0,600 0,300 2,500 C BD A2,400 0,600 2,300 0,700 0,400 1,600 0,600 1,200 0,500 ELEVATION BPLAN ELEVATION A ELEVATION D ELEVATION C NILESH SHAH TOILET 1 DETAIL

37 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL 0,600 1,200 0,500 0,600 1,500 1,100 1,100 0,600 0,400 1,100 1,200 0,500 0,200 0,200 0,600 2,100 0,900 0,500 1,900 0,600 0,500 1,200 0,600 1,100 1,500 1,100 0,600 3,100 1,400 3,100 2,400 1,400 1,700 1,400 1,000 1,400 C D A 0,600 2,100 0,800 0,700 0,400 0,600 1,200 0,500 1,100 1,300 0,200 ELEVATION BPLAN ELEVATION A ELEVATION D ELEVATION C NILESH SHAH TOILET 2 DETAIL

38 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL FLOOR / ROOMSR. NO. NAME PLAN, SECTION, ELEVATION, DETAIL 01. 02. STRUCTURAL OPENING SIZE 900 X 2100 TOTAL NOS 19 SLEEPING AREA 4 No.) FRONT ELEVATION 0.900 PLAN OUT IN KITCHEN 1 No.) STORAGE 2 No.) 0.750 OUT IN PLAN STRUCTURAL OPENING SIZE 750 X 2100 TOTAL NOS 10 TOILET 1 3 No.) SERVICE AREA 4 No.) PASSAGE 4 No.) PARKING AREA ( 4 No.) DOOR SCHEDULE 2.100 0.750 0.900 D1 D2 KITCHEN STORAGE 1 No.) 2.100 DESCRIPTION FLUSH DOOR DESCRIPTION FRP DOOR FLUSH DOOR TOILET 2 6 No.) FLOOR ROOM SR. NO. NAME PLAN, SECTION, ELEVATION, DETAIL 2.035 0.989 1.046 PLAN 2.330 2.391 2.575 ELEVATION STRUCTURAL OPENING SIZE 600 2330 TOTAL NOS LINTEL HEIGHT 2390 PASSAGE 1 No.) STRUCTURAL OPENING SIZE 2000 2330 TOTAL NOS STRUCTURAL OPENING SIZE 600 1300 TOTAL NOS LINTEL HEIGHT 2390 KITCHEN 1 No.) SILL HEIGHT 1000 SLEEPING AREAS No.) ELEVATION PLAN IN OUT 1.000 1.200STRUCTURAL OPENING SIZE 540 1200 TOTAL NOS LINTEL HEIGHT 2200 TOILET 1 No.) SILL HEIGHT 100 01. 02. 04. 05. WINDOW SCHEDULE 2.035 2.330 PLAN FLOOR ROOM SR. NO. NAME PLAN, SECTION, ELEVATION, DETAIL WINDOW SCHEDULE W1 W2 W3 TOILET 2 No.) IN OUT 1.030 2.330 2.391 2.575 ELEVATION 1.000 1.331 PLAN STRUCTURAL OPENING SIZE 1000 2330 TOTAL NOS SLEEPING AREAS No.) 03. PLAN IN OUT 0.400 ELEVATION 0.600 1.600STRUCTURAL OPENING SIZE 400 1600 TOTAL NOS PARKING AREA No.) SILL HEIGHT 600 06. W6 W4 W5 2.200 2.2002.330 2.391 2.575 ELEVATION PLAN SECOND FLOOR 1 No.) 0.540 SERVICE AREA No.) STORAGE 4 No.) NILESH SHAH DOOR WINDOW SCHEDULE

LEVELS FLOOR NAME ENCLOSED SPACE (COVERED) SEMI COVERED AREA

POOL TERRACES & ROOF UNCOVERED AREAS STRUCTURAL AREA (Terrace floor, Mumty, Site Development, Plinth steps, Landscaping)

A B C D E F

+0.15M GROUND FLOOR LEVEL 138.8 56.50 0.00 0.00 0 43.21

+2.75m FIRST FLOOR LEVEL 116.68 3.15 0.00 59.17 20.9 0 +5.35m SECOND FLOOR LEVEL 14.87 0.00 0.00 102.68 0 0 +0.15M SERVICE AREA 102.8 0.00 0.00 0.00 0 0

Total 373.15 59.65 0.00 161.85 20.9 43.21

SQ M SQ FT

Built Up Area A+B+C+F 476.01 5123.72

Built Up Area + Terrace A+B+C+D+F 637.86 6865.86

TOTAL AREA A+B+C+D+E+F 658.76 7090.83

NILESH SHAH RESIDENCE, LONAVALA STATEMENT

39 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL Sheet2

NILESH SHAH AREA

40 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL NILESH SHAH ISOMETRIC VIEW

41 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL NILESH SHAH VIEW

42 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL NILESH SHAH VIEW

43 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL NILESH SHAH VIEW

PROJECT NAME: SHAH

PROJECT TYPE: PROJECT

ASHAY

RESIDENTIAL

(HOLIDAY HOME)

45 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL 26'3" 14'9" LVL +101.1 (-0.60m) LVL +101.1 (±0.00m) TREES 9-12' HIGH STORE ROOM HEAT PUMP LVL +100.35 (-0.75m) 20.5 6.25 (-0.30m) (±0.00m) M 5.4 19'6" 17'6" 12M 25M LVL +101.1 LIVING 19'6" 33'6" 7.2 16'6" 23'6" GAMES ROOM 35'6" 19'6"X M 19'6" 19'6" LVL +100.3 (-0.80m) BEDROOM NW 4.5 19' 14'9" BEDROOM SECURITY KT.S1KT.S3KT.L1KT.L2KT.S4GUEST BEDROOM 4.5 5.4 14'9" 17'6" SEATER) R5 R4 R3 R2 R1 Y8 22503300 Z8 Z9 Z10 Z11 Z12 R1' R3' R4' 3300 Z12'Z7 Y8'Z10'Z9' R2' 3300 Z13 3150 1650 2100 6950 1050 2000 2000 R2 R1 R6 3450 Z13 TOOL SHED LAWN 15M X 30M POOL M X 14 M 3000 HEATED POOL (1.2M DEPTH 85.32 m³) ASHAY SHAH MASTER PLAN

46 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL LVL +101.1 M (±0.00m) LVL +104.85 M (±3.75m) 1200 Y8Z10 Z11 3300 Y8'Z10'Z9' 3150 1650 21003450 +101.1M VERANDAH LEVEL TERRACE LEVEL +104.85M 3750 [12'-3 5/8"] 27.5° 10 11 13 18 19 20 STAIRCASE TRUE ELEVATION (24 RISERS -156mm EACH) 3750 UP 1201200 300 300 300 300 300 300 1 2 3 4 5 6 LVL +104.85 M (±3.75m) UP 1201200 6900 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Y8 22503300 Z8 Z9 Z10 Z11 R4' 3300 Y8'Z10'Z9' 3300 3150 1650 21003450 750 1200 PLAN TREAD DETAIL SECTION TREAD DETAIL ELEVATION SECTION PLAN ASHAY SHAH STAIRCASE DETAIL

47 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL ASHAY SHAH SITE VIEWS

48 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL ASHAY SHAH SITE VIEWS

49 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL ASHAY SHAH SITE VIEWS

50 PROJECT NAME: MARWAH PROJECT TYPE: COMMERCIAL PROJECT

51 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL 1 2 3 4 4a 5 6 7 D SC SB SA S1 S2 S3 S4 S5 S7 P1 P2 P3 PB 10.15 1.98 0.23 3.00 6.00 6.00 6.00 3.00 6.00 1.13 6.83 6.702.28 0.35 2.55 1.68 1.13 7.28 3.63 0.80 S6 2.20 PA LIFT 1.6m x 1.4m LIFT 1.6m x 1.4m 1.1m 2.4m FIREMANS LIFT LIFT 1.6m 1.4m UP 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 LOBBY FIREMAN'S LOBBY 4th FLOOR PLAN (REFUGE AREA) 4.46 3.00 5.90 4.71 2.80 14.72 13.36 35.58 13.85 16.20 6.40 7.25 6.40 8.00 1.80 9.1811.13 1.20 0.80 27.80 FIRE SHAFT ELEC LV 2.07 1.50 1.50 8.88 7.74 1.50 REFUGE AREA PARKING TOWER FIRE STAIRCASE UP 9101112 151413 16 17 18 19 20 21 22 23 24 FGD5 FGP8 FGP9 FGP10 FGP11 FGP12 FGP12 FGP12 FGP12 FGP13 FD2 FGP7 RAMP IN HVAC FIRE FIGHTING PLUMBING LEGEND (duct): ELECTRICAL W2 W1 D4 SD2 FD2 D4 D4 W1 W1 W3 D4 FD2 FD2 SD1 SD3 SD3 SD1 D5 D5 D5 W1 D5 D5 W3 HVAC SERVER ROOM DUCT MARWAH REFUGE FLOOR PLAN

52 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL MARWAH MODEL VIEWS

53 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL MARWAH MODEL VIEWS

54 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL MARWAH MODEL VIEWS

55 PROJECT NAME: RAHEJA ARTESIA PROJECT TYPE: INTERIOR PROJECT

56 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL RAHEJA ARTESIA LIVING ROOM FOYER DEN AREA SITE VIEWS

57 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL BEDROOM ARCHED CEILING RAHEJA ARTESIA SITE VIEWS

58 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL RAHEJA ARTESIA SITE VIEWS FALSE CEILING FALSE CEILING DEN AREA KOTA TILES

59 KAISER- I-HIND, 2ND FLR, 1/6 CURRIMBHOY ROAD, BALLARD ESTATE MUMBAI 400001 TEL (91-22) 22642170 FAX (91-22) 22620345 ARCHITECT APPROVAL STAMP THIS DRAWING IS COPYRIGHTED. IT IS THE PROPERTY OF AR. KAMAL.S.MALIK AND IS NOT TO BE REPRODUCED, SUPPLIED, HANDED OVER TO A THIRD PARTY OR USED FOR PURPOSES OTHER THAN FOR WHICH IT HAS BEEN INTENDED. ALL MEASUREMENTS MUST BE CHECKED AT SITE BY THE CONTRACTOR. DWG NO DRAWN SCALE DATE TITLEGENERAL NOTES 1. FOR STAIRCASE AND TOILETS FOLLOW RESPECTIVE DETAILED DRAWINGS 2. FOR DOOR WINDOW SIZES AND DETAILS AND OPENING SIZES REFER TO DOOR WINDOW SCHEDULE PROVIDED 3. DO NOT SCALE THE DRAWING. ONLY WRITTEN DIMENSIONS TO BE FOLLOWED 4. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 5. THIS DRAWING SHALL BE READ IN CONJUCTION WITH RELEVANT STRUCTURAL/PLUMBING-SANITARY/ELECTRICAL/ HVAC/SERVICES DRAWINGS. 6. FOLLOW STRUCTURAL MEMBERS DIMENSION FROM RELEVANT STRUCTURAL DRAWINGS. 7. ANY DISCREPANCY IN ARCHITECTURAL DRAWINGS OR BETWEEN ARCHITECTURAL DRAWINGS AND DRAWINGS OF OTHER CONSULTANTS MUST BE BROUGHT TO THE NOTICE OF THE ARCHITECT BEFORE SUBMISSION OF TENDER BY THE CONTRACTOR OR BEFORE EXECUTING THE WORK OR BEFORE PLACING ORDER FOR MATERIALS ETC. 8. ALL DIMENSIONS IN PLANS ARE FOR UNFINISHED SURFACES (i.e EXCLUSIVE OF PLASTER THICKNESS) 9. FOR ALL STEEL FABRICATION, ZINC AND GLAZING WORKS, THE CONTRACTOR SHALL PRODUCE DETAILED DRAWINGS FOR ARCHITECTS APPROVAL BEFORE PLACING ORDER/ EXECUTING SAME AT SITE 10. THE ±0.00 M LVL REFERS TO THE EXISTING SITE CONTOUR FROM MEAN SEA LEVEL AS PER SURVEY PLAN NTS PROJECT NAME KRIPA SONPAL RAHEJA ARTESIA SITE VIEWS DOOR FRAME DETAILS TOILET CHEMICAL COATING TOILET PLUMBING DETAILS TOILET DOOR LINTEL DETAIL

THANKYOU KRIPA SONPAL (AR-18-070)

KRIPA SONPAL/INTERNSHIP ARCHITECTURE PORTFOLIO

ABOUT THE FIRM

CONTENTS