How to Change NETGEAR Router’s WiFi Password? A wireless router is an external computer peripheral that accepts incoming Internet connections, such as a cable modem, and converts it to a local wireless signal, allowing computers in the area with wireless adapters to connect to the Internet. Netgear is a popular manufacturer of wireless routers. The configuration of Netgear routers can be modified by accessing the router with an Internet browser.
How do I change my NETGEAR router’s WiFi password
Steps to Change a Netgear Wireless Router Password Step 1. Find out the IP address of your wireless router. Many Netgear routers are configured with http://192.168.0.1 by default. You can find out yours by following
these steps: Click “Start,” “Run,” type “Command” in the box, click “OK,” then type “IP config” and hit “Enter.” Your router’s IP will be displayed as “Default Gateway”.http: // 192. 168. 0 . 1 by default. You can find out yours by following these steps: Click “Start,” “Run,” type “Command” in the box, click “OK,” then type “IP config” and hit “Enter.” Your router’s IP will be displayed as “Default Gateway”.
Step 2. Open an Internet browser and type the IP address of your router into the address bar.
Step 3. Enter your router’s username and password if asked to access your router’s administrative tools. By default, the username and password are usually “admin” and “password”.
Step 4. Modify the settings within the administrative center of the router if necessary. There will be various menus available where you can configure security for your router and customize various communication options.
Step 5. Choose to apply or save changes as necessary. The menus on your router should have easily visible buttons to apply or save the changes you make in the configuration.
Step 6. Close the browser window when you have finished making changes.