The Expediter Trailer Parts Catalog | Section J | Lights & Electrical

Page 1

LIGHTS & ELECTRICAL

LIGHTS & ELECTRICAL

Couplers Jacks & Winches Hitches & Towing Accessories Body Components Trailer Parts Lights & Electrical Locks & Cargo Control Brake Actuating Systems Switches

561.863.2250 | 888.330.1888

Tires & Wheels

561.863.2220 | 800.330.1800

Standard Light Kits L.E.D. Submersible Light Kits Pipe Light™ Submersible Light Kits - Incandescent Bulbs Pipe Light™ Stop/Turn/Tail Lights Submersible Submersible Stop, Turn and Tail Lights Recessed Double Tail Light (Non-Submersible) Marker Clearance Lights - Stud Mount Marker Clearance Lights - Grommet Mount Marker Clearance Lights - Surface Mount Fender Market Lights Back-up, Utility & Courtesy Lights Identification Bar Lights Grommets Guard/Trim Ring Mounting Brackets Light Boxes Light Brackets License Brackets License Light w/License Bracket License Lights Snap-In License/Utility Light Trailer Wire Harnesses Reflectors Reflective Conspicuity Tapes Road Side Reflector Kit Trailer Wire Harnesses Light Bulbs Strobe Light

Suspensions & Fasteners

J

J16 J17 J17 J18 J18 J19-21 J21 J22 J22 J23 J24 J25-26 J27 J27 J28 J29 J29 J30-31 J31 J31 J32 J32 J32 J32 J32 J33 J33 J33 J33 J33 J33

Brake Assemblies

Information Electric Wire - Bulk Flex-Gard® Coiled Wire Wire Terminals - (Vinyl Insulated) Frame Clips Wire Connectors Cable Ties Dielectric Grease Liquid Electrical Tape Vehicle Wire Harness Test Unit Trailer Wiring Test Unit RV/Trailer Light Circuit Tester w/Built In Test Battery Probe Tester Circuit Tester Wire Tester 7-Way Trailer Emulator Tail Light Converters Vehicle to Vehicle Towing Kit Molded Trailer Pre-wired Cables 7-Way Sealed Car End w/Cable 7-Way RV Extension Cable Molded Trailer Cord with Junction Box Multi-Tow® Plug-In Simple® T-Connectors Trailer Junction Box Cable Guard Socket Brackets “Quick Fix” Flat Connector Plugs & Sockets Pre-wired Socket Assemblies Adapters

Hubs & Axles

J2-5 J6 J6 J6 J6 J7 J7 J7 J7 J7 J8 J8 J8 J8 J8 J8 J8 J9 J10 J10 J10 J10 J10 J11 J12 J12 J12 J12 J12-14 J15 J15

Information

J

order@expediter.com

J1


Information Hubs & Axles Brake Assemblies Suspensions & Fasteners Tires & Wheels

J

LIGHTS & ELECTRICAL

Wire Color Codes Universal 4-pole Connectors

9-way (9 circuit) Connectors #

Color

Circuits

Recommended Wire Gauge

Right Turn & Brake Lights

1

White

Ground Return

8 Gauge

Yellow or Red

Left Turn & Brake Lights

2

Blue

Electric Brake

12 Gauge

Brown

Tail Lights

3

Green

Tail, License & Running Lights

14 Gauge

4

Black

Battery Charge

8 Gauge

#

Color

Circuits

1

White

Ground Return

2

Green

3 4

Universal 6-pole Connectors #

Color

Circuits

1

White or Black

Ground Return

5

Red

Stop & Left Hand Turn Signal

14 Gauge

2

Brown

Tail Lights

6

Brown

Stop & Right Hand Turn Signal

14 Gauge

3

Yellow

Left Turn

4

Red

Stop

7

Yellow

Back-up or Auxiliary Ground or Auxiliary Circuit

14 Gauge

5

Green

Right Turn

8

Grey

Auxiliary Circuit

12 Gauge

6

Blue

Auxiliary Circuit

9

Orange

Reefer (Tag) or Stop

14 Gauge

Recreational Vehicles 7-pole Connectors Color

Circuits

Recommended Wire Gauge

#

Color

Circuits

1

White

Ground Return

10 Gauge

1

White

Ground Return

2

Blue

Electric Brake

12 Gauge

2

3

Green

Tail, License & Running Lights

14 Gauge

3

4

Black

Battery Charge

10 Gauge

4

5

Red

Stop & Left Hand Turn Signal

14 Gauge

5

6

Brown

Stop & Right Hand Turn Signal

14 Gauge

6

7

Yellow

Auxiliary Circuit

14 Gauge

7

left rear (with license plate bracket)

side marker (amber)

Blue

Auxiliary Circuit

ground to trailer (white wire)

Switches

J2

10 Gauge

8 Gauge

12 Gauge

12 Gauge

12 Gauge

12 Gauge

12 Gauge

10 Gauge

12 Gauge

12 Gauge

12 Gauge

12 Gauge

12 Gauge

12 Gauge

tail, license side marker (brown wire) ground to vehicle (white wire)

3 rear markers (red) needed for trailers over 80" wide

Recommended FMVSS-121 Wire Gauge Anti-lock

Clearance, Side Marker Black & Identification Lamps Left Turn & Yellow Hazard Signal Stop Lamps & Red Anti-lock Devices Right Turn Signal Green & Hazard Signal Brown Tail, Rear Clearance, Marker & License Plate Lamps

left/stop & turn (yellow wire)

(yellow wire) (brown wire)

(green wire)

Brake Actuating Systems

Locks & Cargo Control

Heavy-duty 7-pole Connectors

#

Lights & Electrical

Trailer Parts

Body Components

Hitches & Towing Accessories

Couplers Jacks & Winches

Note: Check all Circuits before operation vehicle.

left/stop & turn (green wire) right rear

561.863.2220 | 800.330.1800

side marker (amber) located as far forward practical exclusive of tongue (O.O.T.MVSS 108)

TRAILER WIRING DIAGRAM

561.863.2250 | 888.330.1888

order@expediter.com


LIGHTS & ELECTRICAL

comply with all applicable requirements prescribed for it by FMVSS/CMVSS 108. The face of any device on the front/rear and sides should be, respectively perpendicular and parallel to vehicle centerline, unless it is photometrically certified at installation angle. No part of the vehicle shall prevent any device from meeting its prescribed requirements unless an auxiliary device meeting all prescribed requirements is installed. In Canada: Manufacturers and importers of vehicles must have the proper certification test records demonstrating compliance of lighting components with all prescribed requirements.

Description Area

mm (in.)

Functional Purpose

Quantity

Color

Tail Lamps

(T)

Indicates vehicle’s presence and width

Min. 2

Red

Location On the rear - symmetrical as far apart as practicable

Stop Lamps

(S)

Indicates braking

Min. 2

Red

On the rear - symmetrical as far apart as practicable

380-1830 (15-72)

Rear Turn Signal Lamps

(I)

Indicates direction of turn

Min. 2

Red or Yellow

380-2110 (15-83)

RearReflex Reflectors

(A)

Indicate vehicle’s presence and width

Min. 2

Red

On the rear - symmetrical as far apart as practicable On the rear - symmetrical as far apart as practicable facing rearward

380-1530 (15-60)

License Plate Lamp(s) Rear Side Marker Lamps

(L)

Illuminates license plate

Min. 1

White

On the rear - above or at the sides of license plate

No requirement

Min. 2

Red

Min. 2

Red

Min. 2

Yellow

Min. 2

Yellow

(P2, PC* or P3, PC2*)

* photometrically certified at installation angle

a Rear Side

Front and rear side marker lamps/side reflex reflectors indicate vehicle’s presence and length

(A)

Reflex Reflectors Front Side Marker Lamps

(P2, PC* or P3, PC2*)

* photometrically certified at installation angle

b Front Side Reflex Reflectors

(A)

380-1830 (15-72)

Additional Equipment For Trailers Exceeding The following Parameters ~ Length 9.1m (30 ft.) or longer ~ Description

Area

Equipment

5

Functional Purpose

Quantity

Color

Location

(P2 or P3)

Indicates presence of a long vehicle

Min. 2

Yellow

Each side near center facing sideward

380 (15) minimum

(A)

Indicates presence of a long vehicle

Min. 2

Yellow

Each side near center facing sideward

380-1530 (15-60)

Intermediate

Side Marker Lamps

b Intermediate Side Reflex Reflectors

Area

6 8

* photometrically certified at installation angle

Rear Identification (ID) Lamps Front Clearance Lamps

~ Width 2032mm (80 inches) or wider ~

Mandatory Requirements

Functional Purpose Show vehicle’s width MAY NOT be combined with tail lamps

Quantity

Color

Min. 2

Red

(P2 or P3)

Indicate presence of a wide vehicle

Exactly 3

Red

(P2, PC* or P3, PC2*)

Show vehicle’s width

Min. 2

Yellow

At the top - may On the rear - center horizontally spaced 150 (6) to 300 (12) apart be lower if door header narrower than 25mm facing rearward

At widest point - symmetrical on the front or near the front facing forward

As high as practicable

~ Width 2032mm (80 inches) or wider AND GVWR 4536 kg (10,000 lbs) or more ~

Description Conspicuity Treatment

9

Rear Upper Body Markings

10

Bumper Bar Marking

11

Quantity

Height

Location

White

On the rear upper corners facing rearward

At the top

DOT-C

Exactly 2 pairs of 300mm long strips

DOT-C2

Continuous

Red•White

On the rear bumper bar’s horizontal element full width - facing rearward

No requirement

Rear Lower DOT-C3 Body Marking DOT-C4 Side Marking

Continuous

Red•White On the rear full width of the

(see location)

see options

Red•White see options

As horizontal as practicable and as close as practicable to the range of 375 to 1525mm from the ground Each side - facing sideward continuous, or As horizontal as practicable and evenly spaced over minimum of 50% of length starts and ends as close to the front as close as practicable to the range of 375 to 1525mm from the ground and rear of the vehicle as practicable

vehicle - facing rearward

Options Relex reflectors may not be required if they are replaced in their required location with conspicuity treatment. Optional in Canada: Rear lower body and side conspicuity treatment may also be solid white, solid yellow, or white and yellow.

Switches

12

Mandatory Requirements

Color

Coding

Brake Actuating Systems

Area

Locks & Cargo Control

* photometrically certified at installation angle

Location Height At widest point - symmetrical As high as practicable on the rear or near the rear may be lower only if ID lamps are at the top facing rearward

Lights & Electrical

7

Equipment SAE Lens Coding Rear (P2, PC* orP3, PC2*) Clearance Lamps

mm (in.)

Trailer Parts

Description

Ground Height

Body Components

a

Mandatory Requirements

SAE Lens Coding

Hitches & Towing Accessories

380-1530 (15-60) Each side at rear no max. for veh. under as far back as practicable 2032 (80) wide Each side at rear 380-1530 as far back as practicable (15-60) facing sideward 380 (15) Each side at rear as far forward as practicable minimum Each side at rear 380-1530 as far forward as practicable (15-60) facing sideward

Couplers Jacks & Winches

4

Ground Height

SAE Lens Coding

Tires & Wheels

3

Mandatory Requirements

Equipment

Suspensions & Fasteners

2

Basic Equipment Required On All Trailers

Brake Assemblies

1

Hubs & Axles

Federal Lighting Requirements For Trailers

Information

IMPORTANT NOTE: Every lamp, reflex reflector, and conspicuity treatment (device) must be permanently attached in the location specified below and must

J

Note: The edge of red conspicuity tape shall not be closer than 75mm to the edge of any amber lamp and the edge of white conspicuity tape shall not be closer than 75mm to the edge of any lamp

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com

J3


J J31 4

Switches Switches

Brake Brake Actuating Actuating Systems

Locks & & Locks Cargo Control

Lights Lights & & Electrical Boat Trailer Parts Trailer Parts

Body Body Components Components

Hitches & & Hitches Towing Towing Accessories Accessories

Couplers Couplers, Jacks Jacks & & Winches Tires Tires & & Wheels Wheels Suspensions Suspensions & Fasteners

Brake Brake Assemblies

Hubs Hubs & Axles and Axles Information Information

J SECTION

LIGHTS & ELECTRICAL

J Federal Lighting Requirements For Trailers 6 1

8

8

4

12

5a

4a 5ab

8 4ab

RED

YELLOW

561.863.2220 561-863-2220| 800.330.1800 / 800-330-1800 12

12

4

3

2

5

9

3

1

12

561.863.2250 888.330.1888 561-863-2250 / |888-330-1888

7

4

6 1 2

3

2

6

9

2

1 6

123 456

3

9

11

7 1 6

123 456

10

12 7 9

8

6 1 1 6

*upper OR lower position 123 456

10

7 6 9

8

5

11

1

123 456

12

10

order@expediter.com order@expediter.com


LIGHTS & ELECTRICAL

J 7

Body Body Components Components

Lights & Lights & Electrical Electrical

Locks & Locks & Cargo Control Cargo Control

Brake Brake Actuating Actuating Systems Systems

123 456

8

8

4a

RED

YELLOW

Switches Switches

1

1

Trailer BoatParts Trailer Parts

123 456

3

Hitches & Hitches Towing& Towing Accessories Accessories

6

6

Couplers Couplers, Jacks & Jacks & Winches Winches

7 4a

Tires & Tires & Wheels Wheels

2 4ab

Suspensions Suspensions & Fasteners & Fasteners

1 1

Brake Brake Assemblies Assemblies

123 456

3

J5 J32

order@expediter.com order@expediter.com

561.863.2250 | 888.330.1888 561-863-2250 / 888-330-1888

561.863.2220 561-863-2220| /800.330.1800 800-330-1800

6 6

Hubs Hubs & Axles and Axles

1

6 7 6 4ab

1 7 2 3

1 2 1 3

2

8

4ab

8 4ab

6 6

Information Information

Federal Lighting Requirements For Trailers

J SECTION

123 456


Information

LIGHTS & ELECTRICAL

Electric Wire - Bulk

8601-Y

Part #

Size

Gauge

Conductor

Color

Type

8601-BK 8601-BL 8601-BR 8601-G 8601-R 8601-W 8601-Y 8610-R

500’ 500’ 500’ 500’ 500’ 500’ 500’ 500’

16 16 16 16 16 16 16 10

1 1 1 1 1 1 1 1

Black Blue Brown Green Red White Yellow Red

Single Single Single Single Single Single Single Single

NOTE: Single conductor wire is sold by the spool only

Part #

8602 8615 8603 8604

8616

18 18 14 12 18 18 18 18 18 18 18 14 14

2 2 2 2 3 3 3 4 4 4 4 6 6

8617

12/10

7

8617-500

12/10

7

8617

Type

Red & Black Red & Black Black & White - 1000’ Black & White - 1000’ Brown, Green & Yellow Brown, Green & Yellow - 500’ Brown, Green & Yellow - 2000’ Brown, Green, Yellow & White Brown, Green, Yellow & White - 500’ Brown, Green, Yellow & White - 1000’ Brown, Green, Yellow & White - 4000’ Red, Green, Yellow, Black, Brown & Blue Red, Green, Yellow, Black, Brown & Blue - 500’ Red, Yellow, Black, Blue, Green, Brown & 10 GA. White Red, Yellow, Black, Blue, Green, Brown & 10 GA. White - 500’

Bonded Bonded Jacket Jacket Bonded Bonded Bonded Bonded Bonded Bonded Bonded Jacket Jacket Jacket Jacket

Flex-Gard® (Convoluted Loom)

8644-F

2019

Part #

Description

8644-F 8644-100 8642-F 8642-250 8643-F 8643-100 2019

½” Spiral Cut Sleeving - Sold per foot ½” Spiral Cut Sleeving - 100 ft Roll ¼” Spiral Cut Sleeving - Sold per foot ¼” Sleeving - 250 ft Box 3 ⁄8” Spiral Cut Sleeving - Sold per foot 3 ⁄8” Spiral Cut Sleeving - 100 ft Roll Tee Connector for ½” Loom

Locks & Cargo Control

Coiled Wire 18221

Part #

Description

18221

7 Conductor; 14 Gauge - 12’ Working Length

Part #

Brake Actuating Systems Switches

J6

Description

NOTE: Multi conductor wire is sold by the foot

Lights & Electrical

Trailer Parts

Gauge Conductor

8602 8602-500 8613-1000 8615-1000 8603 8603-500 8603-2000 8604 8604-500 8604-1000 8604-4000 8616 8616-500

Body Components

Hitches & Towing Accessories

Couplers Jacks & Winches

Tires & Wheels

Suspensions & Fasteners

Brake Assemblies

Hubs & Axles

J

Blade

Butt

Ring

561.863.2220 | 800.330.1800

8646-100 2582-100 2583-100 2586-100 2587-100 2588-100 2589-100 2596-100

Wire Terminals - (Vinyl Insulated) Wire Range

Color

Style

22 - 18 GA. 22 - 18 GA. 16 - 14 GA. 22 - 18 GA. 16 - 14 GA. 22 - 18 GA. 16 - 14 GA. 12 - 10 GA.

Red Red Blue Red Blue Red Blue Yellow

Ring #10 Ring ¼” Ring ¼” Blade Blade Butt Butt Butt

561.863.2250 | 888.330.1888

order@expediter.com


LIGHTS & ELECTRICAL

Frame Clips Quantity

Galvanized Clip Galvanized Clip Heavy-duty Zinc Heavy-duty Zinc Small Clip - Black Medium Clip - Black Large Clip - Black

Each 100 pcs Each 100 pcs Each Each Each

2584

2597

Quantity

2580 2580-100 2580-500 2581 2581-100 2581-500 2595 2595-100

14 - 18 GA. 14 - 18 GA. 14 - 18 GA. 14 - 18 GA. 14 - 18 GA. 14 - 18 GA. 12 - 10 GA. 12 - 10 GA.

Blue Blue Blue White White White Yellow Yellow

Each 100 pcs 500 pcs Each 100 pcs 500 pcs Each 100 pcs

25311

2580 Couplers Jacks & Winches

Color

Tires & Wheels

Wire Range

Suspensions & Fasteners

Wire Connectors Part #

Brake Assemblies

Description

2584 2584-100 2597 2597-100 25311 25312 25313

Hubs & Axles

Part #

Hitches & Towing Accessories

2581

Cable Ties Quantity

4” OL 4” OL 4” OL 81⁄8” OL 81⁄8” OL 81⁄8” OL 111⁄8” OL 111⁄8” OL 111⁄8” OL 14¼” OL 14¼” OL 14¼” OL

Each 100 pcs 1000 pcs Each 100 pcs 1000 pcs Each 100 pcs 1000 pcs Each 100 pcs 1000 pcs

Lights & Electrical

Length

Black Black Black Black Black Black Black Black Black Black Black Black

Trailer Parts

Color

2579 2579-100 2579-1000 2585 2585-100 2585-1000 2591 2591-100 2591-1000 2593 2593-100 2593-1000

Body Components

Part #

2585

211755

Locks & Cargo Control

Dielectric Grease Part #

Description Protects electrical connections from corrosion. Water-resistant formulation sheds moisture and doesn’t wash away. 2 oz. tube

Brake Actuating Systems

Liquid Electrical Tape Description Prevent corrosion and increases reliability. 4 oz. can

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

211755

6447

order@expediter.com

Switches

Part # 6447

Information

J

J7


LIGHTS & ELECTRICAL

Vehicle Wire Harness Test Unit Part #

Hubs & Axles

Information

J

50918

Brake Assemblies

50918

Trailer Wiring Test Unit

Tires & Wheels

Suspensions & Fasteners

Part #

50928

RV/Trailer Light Circuit Tester w/Built In Test Battery

TVTB03

Part # 18027 18027

Description Complete with insulated alligator clip and ground wire. Ideal for cars, trucks, SUV’s, motorcycles, RV’s and small engines.

Circuit Tester Part # 404593 404593

Description Flat-Lite plug mount, circuit tester, and plug saver all in one. Secures 4-way flat when not in use. Provides water tight protection. Built-in circuit testers with red L.E.D.s indicating proper connection.

Wire Tester Part # 18179

Description Plugs into 7-way flat pin “RV Style” plug and tests all functions. L.E.D. circuit indicators light up to show that the vehicle wiring is functioning properly.

18179

7-Way Trailer Emulator

Brake Actuating Systems

Locks & Cargo Control

Description Tests 4 pin, 6 pin and 7 pin RV vehicles and trailers. Checks for: Shorts, opens & ground problems, cross shorts, amp draw, high resistance circuits, interchanged circuits, electric brakes. Compatible with L.E.D lights

Probe Tester

Lights & Electrical

Trailer Parts

Body Components

Hitches & Towing Accessories

Couplers Jacks & Winches

TVTB03

Part # 6562

Switches

Description • Tests all trailer functions including left turn, brake, tail and backup lights, electric brake and auxiliary power • Adapts to 4-wire flat and 6 or 7-way RV blade round • Includes battery terminal clips.Can be used with any 12 volt battery • Unit is short circuit proof • If the trailer has L.E.D. lights, AMPs will not register on display

50928

Part #

J8

Description • Tests all tow vehicle functions including ground, auxiliary power lead, brake controller, directional and backup lights. • Adapts to 4-way flat and 6 or 7-way RV blade round. • Heavy-duty, 20’ extension cord is included. • Optional 7-way round heavy-duty adapter also available. • Compatible with tow vehicles with L.E.D. lights

6562

561.863.2220 | 800.330.1800

Description 7-way Trailer Emulator is used for the proper installation and set-up of a brake control when a trailer is not readily available. Brake control set-up is accomplished using a built-in load module that will simulate electric magnet brakes on a trailer.

561.863.2250 | 888.330.1888

order@expediter.com


LIGHTS & ELECTRICAL

Tail Light Converters Part # 46255 46365 (8amp)

Hubs & Axles

(5amp)

Description Protects against damage to vehicles wiring systems if trailer short occurs. Computer protection system for ANY vehicle, with or without amber turn signals. Heavy-duty rating. Compete w/wire connectors, tie straps, wire, fuse holder & plug mount circuit tester. Incandescent tail light = 1 amp per light; Incandescent marker = 0.5amp per light

4410

4411

4412

4411 Tires & Wheels

Part #

Description An electronically unobstructed 3 - 2 wire trailer light converter for all foreign and American cars with separate amber turn signals.Trailer plug build-in.

4410

Description Heavy-duty 2>3 converter for RVs and other 2 wire systems towing a vehicle with amber turn signals.

119130

Part #

Description

119148

Modulite HD Protector Trailer Light Module & Installation Kit

119148

Brake Actuating Systems Switches

561.863.2250 | 888.330.1888

Locks & Cargo Control

561.863.2220 | 800.330.1800

Lights & Electrical

• The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit •Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off •Will work with either LED/Incandescent bulbs (vehicle & trailer) •Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps •Designed not to send feedback thru the vehicle circuits •The trailer brakes will override the hazard lamps when the brake is activated •The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the converter to turn on the fully and gives the trailer lights full brightness during activation •Will work with most vehicles that have multiplex system for lighting •Will not work with vehicles with low-side switch •Can be used on a 2 wire or 3 wire system •All solid-state components in potted encapsulation •Includes integrated protective cover •Includes installation kit with wire, connectors and fuse holder

119190

Trailer Parts

119190

Description ModuLite® HD Protector w/Integrated Circuit & Overload Protection Trailer Light Power Module; Will work w/most LED/Incandescent/Standard bulbs (vehicle & trailer)

Body Components

Part #

Hitches & Towing Accessories

119130

Description Heavy-duty tail light converter, double-molded weatherproof design. Converter mounts in trunk out of harm’s way. 2.1 amps per circuit. 60” lead.

Couplers Jacks & Winches

4412 Part #

Suspensions & Fasteners

Part #

Description An electronically unobstructed 3 - 2 wire trailer light converter for all foreign and American cars with separate amber turn signals. Needs an additional trailer plug.

Brake Assemblies

4409 Part #

Information

J

order@expediter.com

J9


LIGHTS & ELECTRICAL

Vehicle to Vehicle Towing Kit Part # 48955

Molded Trailer Pre-wired Cables

Tires & Wheels Couplers Jacks & Winches Hitches & Towing Accessories

8636

6-way trailer wiring connector - 6’ cord

Part # 8637

Description 7-way trailer wiring connector - 6’ cord

8639

7-way trailer wiring connector - 8’ cord

7-Way Sealed Car End w/Cable

Body Components Trailer Parts

Description 6-way trailer wiring connector - 4’ cord

8637

Part # 8638

Description Prewired 7-way car end sealed w/4 ft. of UL listed 7-way cable. Tin-plated, solid brass terminals, housings of industrial-strength, glass-filled thermoplastic, door with EPDM rubber gasket and heavy-duty stainless steel spring.

8638

7-Way RV Extension Cable

Lights & Electrical Locks & Cargo Control

Part # 8635

8635

Part # 20027

Description 7-way U.S. car end to 7-way trailer end extension cable 7’

20027

Molded Trailer Cord with Junction Box

Brake Actuating Systems Switches

J 10

Description Installs on towed vehicle. Enables towed vehicle tail lights to operate with towing vehicle.

48955

Suspensions & Fasteners

Brake Assemblies

Hubs & Axles

Information

J

Part # 8637-A

Description 6 foot; 7-way RV plug prewired to plastic junction box. 14G red/brown/green/yellow, 12G blue, 10G white/black.

8639-A

8 foot; 7-way RV plug prewired to plastic junction box. 14G red/brown/green/yellow, 12G blue, 10G white/black.

8637-A

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com


LIGHTS & ELECTRICAL

Multi-Tow® Plug-In Simple® T-Connectors

Hubs & Axles

Unplug your vehicle’s factory wiring harness and plug in a vehicle wiring kit. That’s how easy trailer wiring is with a Plug-In-Simple!® wiring kit, featuring OEM connectors for a perfect, weather-tight fit!

Brake Assemblies

These kits provide a 4-wire flat connector for your trailer. Optional “pre-wired” 4-wire flat to 6-way round and 4-wire flat to 7-way RV blade round extension adapters to custom install the vehicle side wiring to most trailer combinations. Multi-Tow® Connectors give you the ability to tow trailers with different wiring connectors from the same vehicle connector. These connectors simply replace the 7-way connector that came with your vehicle. Description 7 RV Blade to 4-Wire Flat Towing; Fits Standard 7 RV Blade Bracket

FORD Ford | Lincoln | Mercury | Nissan | Infiniti | Kia | Audi Vans Aviator Navigator Mark LT Mountaineer

2004 - 2015 2003 - 2006 1999 - 2015 2006 - 2014 2002 - 2010

Armada Titan QX-56 Borrego Q7

2004 - 2015 2004 - 2015 2004 - 2015 2009 2007 - 2015

Couplers Jacks & Winches

2008 - 2016 1999 - 2015 2000 - 2005 2002 - 2015 2007 - 2010 2009 - 2015

Tires & Wheels

F-Series Expedition Excursion Explorer Explorer Sport Trac Flex

40955

GM Chevy | GMC | Olds | Cadillac | Hummer | Buick | Isuzu | Saab 2008 - 2015 2000 - 2009 2000 - 2015 2007 - 2015 2008 - 2015 2002 - 2004 2002 - 2015

H2/H2 SUT H3 H3 SUT Rainier Enclave Ascender 9-7X

2003 - 2009 2006 - 2009 2009 2004 - 2007 2008 - 2012 2004 - 2008 2005 - 2010

Aspen Liberty

2007 - 2009 2008 - 2010

Body Components

Express Van Envoy Yukon/XL/Denali Acadia Canyon Bravada Escalade/EXT

2003 - 2013 1999 - 2013 2002 - 2013 2007 - 2015 2002 - 2009 2000 - 2014 2008 - 2015

Hitches & Towing Accessories

1500 Pickups 2500/3500 Pickups Avalanche Tahoe Trailblazer Suburban Colorado

2007 - 2015 2007 - 2009

2009 - 2010 2010 - 2016

Description 7 RV Blade to 4-Wire Flat Towing; Fits Standard 7 RV Blade Bracket

Dodge | Chrysler | Jeep | Mercedes | Mitsubishi Multi-Tow® Ram Van Aspen Pacifica Commander Grand Cherokee

2014 - 2015 Early 2007 2003 - 2008 2006 - 2010 2000 - 2010

Liberty Wrangler GL-Class Raider

2005 - 2007 2004 - 2015 2007 - 2010 2006 - 2008

Brake Actuating Systems

Part # 43385

2000 - 2009 2000 - 2009 2000 - 2010 2000 - early 2007 2002 - 2009

Locks & Cargo Control

Ram 1500 Ram 2500/3500 Dakota Durango Sprinter

42145

Description 7 RV Blade to 4-Wire Flat Towing; Fits Standard 7 RV Blade Bracket

Tundra

561.863.2220 | 800.330.1800

43385 Switches

Toyota | Lexus Multi-Tow® 2003-2006

561.863.2250 | 888.330.1888

Lights & Electrical

Part # 42145

Journey Ram 1500 Pickups

Trailer Parts

DODGE Dodge | Chrysler | Jeep Durango Nitro

Suspensions & Fasteners

Part # 40955

Information

J

order@expediter.com

J 11


Information

J

LIGHTS & ELECTRICAL

Trailer Junction Box

Hubs & Axles

Part # 8641

Description 7-way trailer junction box. Provides a fast, simplified way of connecting wires from the connector to the trailer wiring. Includes hardware, 4 closed and 4 open rubber grommets for 5⁄8” diameter wire. External mounting flanges on 73⁄8” centers

Cable Guard Description Spring guard fits #5413, 5414, 5416 and 5418 plugs or sockets

Part # 5415 5415

Socket Brackets Description

5402 5410 5412 20012 18159 18144

Fits #5404 and 5406 sockets Fits 7-pin HD sockets #5414 and 5418 Fits #5408 and 5420 sockets Fits #420015 OEM style socket Fits 7-way RV sockets. Clamps to hitch cross-tube Fits some 4-way flat connectors

Description Repairs/Replaces damaged 4-flat; Includes vehicle and trailer sides. Snaps onto wires - self splicing - no striping required

Part # 48195

48195

5400

Brake Actuating Systems Switches

J 12

18144

“Quick Fix” Flat Connector

Trailer Parts

Body Components

5410

18159

Part #

Locks & Cargo Control

Lights & Electrical

5412

5402

Hitches & Towing Accessories

Couplers Jacks & Winches

Tires & Wheels

Suspensions & Fasteners

Brake Assemblies

8641

48085

Part # 5400 5401 5400-01 5441 48085

561.863.2220 | 800.330.1800

5401

Plugs & Sockets

5400-01

Description Flat 4 pin trailer plug, 18” lead Flat 4 pin trunk socket (car side), 60” lead Flat 4 pin plug and socket, 60” wire loop Flat 4 pin plug and socket, 12” wire loop Flat 4 pin with magnetic holder - 60” wire, cover, connectors, grease

561.863.2250 | 888.330.1888

order@expediter.com


LIGHTS & ELECTRICAL

Plugs & Sockets (continued)

Part # 5409

Description 4 pin knock-out socket, 30” wires. Mounts in 1¼” diameter hole.

5392

5444

Brake Assemblies

Description Flat 5 pin trunk socket (car side), 60” Flat 5 pin trailer plug (trailer side), 48” Flat 5 pin plug and socket, 60” wire loop Flat 5 pin plug and socket, 12” wire loop

Suspensions & Fasteners

5409

48385

48365

5403

5404

5407

5408

5419

5420

Description 5-pole round plug - Trailer side 5-pole round socket - Vehicle side

Description 6-way metal plug - Trailer side 6-way metal socket - Vehicle side

Locks & Cargo Control

Description 7-way metal, RV plug - Trailer side 7-way metal, RV socket - Vehicle side

Brake Actuating Systems

561.863.2250 | 888.330.1888

order@expediter.com

Switches

Description 7-way poly RV plug - Trailer side 7-way poly RV socket - Vehicle side

561.863.2220 | 800.330.1800

Lights & Electrical

Part # 5419 5420

5406

Trailer Parts

Part # 5407 5408

5405

Description 4-way metal plug - Trailer side 4-way metal socket - Vehicle side

Body Components

Part # 5403 5404

5396

Hitches & Towing Accessories

Part # 48385 48365

5395

Couplers Jacks & Winches

Part # 5405 5406

Description 4-way metal plug - Trailer side 4-way metal socket - Vehicle side

Tires & Wheels

Part # 5395 5396

Hubs & Axles

Part # 5391 5393 5392 5444

Information

J

J 13


Information

J

LIGHTS & ELECTRICAL

Plugs & Sockets (continued)

Hubs & Axles

Part # 420015

Brake Assemblies

420015

Part #

Suspensions & Fasteners

20047

Description 7-way RV style OEM replacement socket 12 volt, 30 amp. Solves corrosion problems and eliminates rusting when mated with special interlocking sealed connector.

Description On new body style pickups (2007+), there is a cut-out to the left of the license plate designed to fit this twist-in style 7-way connector. Exact replacement for 1999 to current GM pickups with factory installed hitch.

Tires & Wheels

20047 Part #

Description

40975

7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle’s OEM wiring system and mounts with included bracket.

Part #

Description

20147 20024

USCAR vehicle side 7-way harness. 18” leads USCAR vehicle side harness and RV socket. 48” leads

Part # 40165

Description F-250 Heavy Duty (2002-2004); F-350 (2002-2004) to 4 way Flat

Part # 5413 5414 5428

Description 7-way metal, heavy-duty - Trailer plug 7-way metal, heavy-duty - Vehicle socket Rubber socket boot for 7-way socket

Part # 5416 5418 5428

Description 7-way poly, heavy-duty - Trailer plug 7-way poly, heavy-duty - Vehicle socket Rubber socket boot for 7-way socket

Part # 5421 5423

Description 9-way poly, heavy-duty - Trailer side 9-way poly, heavy-duty - Vehicle socket

20147

Body Components

Hitches & Towing Accessories

Couplers Jacks & Winches

40975

20024

5413

Brake Actuating Systems Switches

J 14

5414

5428

Locks & Cargo Control

Lights & Electrical

Trailer Parts

40165

5416

5421

5418

5423

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com


Pre-wired Socket Assemblies

Part # 18320 18321

Description 6-way round pin connector 7-way flat pin connector - Plastic

47185

47565

Description 7-way RV socket with 6-pin plug prewired; Center pin auxiliary. 7-way HD socket with 7-way RV plug prewired

18321

5443

5445

Body Components

Trailer

Truck

Adapts round 6-way vehicle to flat 4-way trailer Adapts RV 7-way vehicle to flat 4-way trailer Adapts RV 7-way vehicle to round 6-way - Center = Auxiliary trailer Adapts RV 7-way vehicle to round 6-way - Center = Brake trailer Adapts HD 7-way vehicle to flat 4-way trailer Adapts RV 7-way vehicle to flat 5-way trailer Adapts RV 7-way to 4 and 5-way flat Adapts RV 7-way to 4-way flat

5417

5427 5424

47365

5448

5449

Description RV 7-way to 4 flat w/molded cord - 22½” overall length RV 7-way to 5 flat w/molded cord - 22½” overall length

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com

Switches

47385

Brake Actuating Systems

Part # 5448 5449

5411

Locks & Cargo Control

5411 5417 5427 47555 5424 5439 47385 47365

Lights & Electrical

Description

Trailer Parts

Adapters Part #

Hitches & Towing Accessories

Part # 5443 5445

18320

Couplers Jacks & Winches

Used to convert any trailer wiring component, T-one or tail light converter with a 4-flat car end connector to a 6 & 7-way round connector. Additional connections are required for brakes and auxiliary circuits.

Tires & Wheels

Description 7-way RV blade to both 6-round and 4-wire flat; Center pin auxiliary 7-way RV blade to both 6-round and 4-wire flat; Center pin electric brake

Suspensions & Fasteners

Part # 47565 47575

47175

Brake Assemblies

Description Provides 6 round or 4-wire flat towing from one location Provides 7 RV blade round or 4-wire flat towing from one location

Hubs & Axles

Part # 47175 47185

Information

J

LIGHTS & ELECTRICAL

J 15


Information

J

LIGHTS & ELECTRICAL TOW VEHICLES MAY BE AS WIDE AS 102" WITHOUT SPECIAL PERMITS

A 7

UNDER 80" TRAILER

Brake Assemblies

Hubs & Axles

8

6

Suspensions & Fasteners

9 1,2,3,4

Tires & Wheels

TOW VEHICLES MAY BE AS WIDE AS 102" WITHOUT SPECIAL PERMITS

A 7

OVER 80" TRAILER

8

5

6

11

10

Color

Visibility Requirements

#

Function

Color

Visibility Requirements

1

Tail Light

Red

45˚ Left and Right 10˚ Up and Down

10

Rear Clearance Light

Red

45˚ Left and Right 10˚ Up and Down

2

Stop Light

Red

45˚ Left and Right 10˚ Up and Down

11

Rear Identification Light

Red

45˚ Left and Right 10˚ Up and Down

3

Turn Light

Red

45˚ Left and Right 10˚ Up and Down

12

Front Clearance Light

Amber

45˚ Left and Right 10˚ Up and Down

4

Rear Reflex

Red

20˚ Left and Right 10˚ Up and Down

5

Rear Sidemarker

Red

45˚ Left and Right 10˚ Up and Down

6

Rear Side Reflector

Red

20˚ Left and Right 10˚ Up and Down

7

Front Sidemarker

Amber

45˚ Left and Right 10˚ Up and Down

8 Front Side Reflector Amber

20˚ Left and Right 10˚ Up and Down

9

License Light

Clear

Interpretations A

B

Above or Side Illuminated

The front sidemarker must be mounted so that it is visible 45 degrees left and right without obstruction from United States the trailer or tow vehicle to comply with NHTSA’s interpretation of “as far forward as practical.” The front sidemarker must be mounted from 39” to 60” from the front of the trailer and be visible from 45 degrees left and right without Canada obstruction from the trailer and tow vehicle to comply with Transport Canada’s interpretation of “as far forward as practical.”

(Submersible Incandescent Kits on Page J18)

Part #

Trailer Parts Lights & Electrical

Function

Standard Light Kits - Incandescent Bulbs Description Light Kit - Retail Clamshell Package Includes Tail Lights, Side Marker Lights, 25’ Harness and Tag Bracket Light Kit - Plain Box Includes Tail Lights, Side Marker Lights, 25’ Harness and Tag Bracket

Industry Style

Description Light Kit - Plain Box Includes Tail Lights, 4’ Truck Connector, 25’ Harness, Tag Bracket and Hardware

Industry Style

Industry Style

2602

Description Auxiliary Tow Light Kit with Two Double Face (Red/Amber) Stop, Tail and Turn Lights with Magnetic Base, Trunk Connector and 20’ Trailer Harness. Retail Clamshell Packaging

2723

Replacement lens - Amber

313-15A

2724

Replacement lens - Red

313-15R

2599 2600 2599

Part #

Locks & Cargo Control Brake Actuating Systems

1,2,3,4

Over 80” Lighting

#

9

Body Components

Hitches & Towing Accessories

Couplers Jacks & Winches

12

Switches

In this section you will find information on legal requirements for trailer lighting, wiring diagrams for 4, 6 & 7-pole systems, as well as some lighting terminology. Some of the most basic maintenance practices can add years of service to your trailer lighting system. One tip is to always unplug the trailer harness from the tow vehicle before launching and loading. Doing so will prevent thermo shock failure when a hot bulb comes in contact with cold water. Another easy maintenance tip is to coat all exposed metal surfaces with dielectric grease, including trailer harness plugs, bulb sockets and contacts. The grease will help prevent corrosion, which is the leading cause of light failure. Finally, as a safety precaution, always check the trailer lighting for proper operation before heading out on the road.

Under 80” Lighting 5

J 16

Lighting Tech Information

2836

2836

2602

Part #

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

V545 545

-

V555

order@expediter.com


LIGHTS & ELECTRICAL

L.E.D. Submersible Light Kits Part #

Industry Style Hubs & Axles

2702

Description L.E.D. LIGHT L.E.D. Submersible Light Kit 8 to 14 volts Includes L.E.D. Tail Lights, L.E.D. Side Marker Lights, 25’ Harness, and Tag Bracket Retail Clamshell Package

545LED

Brake Assemblies

2702

2711

Description L.E.D. LIGHT L.E.D. Submersible Light Kit 8 to 14 volts Includes L.E.D. Tail Lights, 25’ Harness, & Tag Bracket. Retail Clamshell Package

Suspensions & Fasteners

Part #

Industry Style 540LED

Tires & Wheels

2711

2800

Description L.E.D. LIGHT L.E.D. Submersible over 80” Light Kit Includes Tail Lights, 25’ Harness and Tag Bracket Retail Clamshell Package

Industry Style

Couplers Jacks & Winches

Part #

-

Hitches & Towing Accessories

2800

2948

Description L.E.D. LIGHT 6 x 3½ x 2¼” L.E.D. Light Kit Includes Tail Lights, 25’ Harness and Tag Bracket Retail Clamshell Package

Industry Style

Body Components

Part #

-

Trailer Parts

2948

Pipe Light™

1237

Description Pipe-Light™ boat trailer L.E.D. light kits provide rubber mounted submersible 12 volt lights for boat trailers using 2” PVC pipe. Fits 23⁄8” OD pipe. Standard 3 wire plug in connectors with 10 foot wire leads, stainless screws, frame clips and wire connectors are included (1 Pair). Fits #1276, 1282 and 1247 Guide Kits.

Lights & Electrical

Part #

Locks & Cargo Control

1237

1232

27656A

L.E.D. Guide Post Marker Light 1232

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com

Switches

27656A

Description Over 80” wide Pipe-Light™ boat trailer L.E.D. light kits with rear side markers, reflectors and 2 diode L.E.D. white license plate light and bracket. Some mounting hardware included. Light kits provide rubber mounted submersible 12 volt lights for boat trailers using 2” PVC pipe. Fits 23⁄8” OD pipe. Fits #1276, 1282 and 1247 Guide Kits.

Brake Actuating Systems

Part #

Information

J

J 17


Information

J

LIGHTS & ELECTRICAL

Submersible Light Kits - Incandescent Bulbs

Brake Assemblies

Hubs & Axles

Part # 2598

Suspensions & Fasteners Tires & Wheels

2908

Couplers Jacks & Winches

Part # 2603

Description Submersible Light Kit - Retail Clamshell Package Includes 2 Tail Lamps (#2904 & 2905), License Plate Bracket, 25’ Wishborn Trailer Wiring Harness, 4’ Truck Connector, and Hardware. Approved for trailers over 80” wide

Industry Style

Description Submersible Light Kit - Dry Launch Includes 2 Tail Lamps (#2671 & 2672) 7-Function, 25’ Trailer Harness, Plastic Tag Bracket.

Industry Style

Description Submersible Light Kit - Dry Launch Includes 2 Tail Lamps (#2673 & 2674) 8-Function, 35’ Trailer Harness, Side Marker Lights and Plastic Tag Bracket.

Industry Style

-

-

540LED

2603 Part #

Lights & Electrical

Trailer Parts

Industry Style

2909

Body Components

Hitches & Towing Accessories

2909

2806

801BKIT

2806

Pipe Light™ Part #

Brake Actuating Systems

Locks & Cargo Control

Description Submersible Light Kit - Retail Clamshell Package Includes 2 Tail Lamps (#2830 & 2831), License Plate Bracket, 25’ Wishborn Trailer Wiring Harness, 4’ Truck Connector, and Hardware. Approved for trailers over 80” wide

V544

2908 Part #

1234 Switches

Industry Style

2598

Part #

J 18

Description Submersible over 80” Light Kit Includes Tail Lights, 25’ Harness and Tag Bracket Retail Clamshell Package

Description Pipe-Light™ boat trailer INCANDESCENT light kits provide rubber mounted submersible 12 volt lights for boat trailers using 2” PVC pipe. Fits 23⁄8” OD pipe. Standard 3 wire plug in connectors with 10 foot wire leads, stainless screws, frame clips and wire connectors are included (1 Pair). Fits #1276, 1282 and 1247 Guide Kits.

1234

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com


Stop/Turn/Tail Lights Description Tail, Stop, Turn & Tag LH Tail, Stop & Turn RH Replacement Tail Light Lens Replacement Side Marker Lens

Industry Style 440L 440 440-15R 55-15R

49⁄16”

49⁄16” 517⁄64” 27⁄8”

Industry Style 444L 444 440-15R 56-15R

4.5”

4.5” 5.94” 2.81”

Description Tail, Stop, Turn & Tag LH; Submersible; Under 80” Tail, Stop & Turn RH; Submersible; Under 80” Replacement Tail Light Lens Replacement Side Marker Lens

Industry Style 441L 441 440-15R 55-15R

49⁄16” 49⁄16” 517⁄64” 27⁄8”

Couplers Jacks & Winches

Part # 2775 2776 2742 2718

2”

Tires & Wheels

2810

Suspensions & Fasteners

Description Tail, Stop, Turn & Tag LH; Over 80” Tail, Stop & Turn RH; Over 80” Replacement Tail Light Lens Replacement Side Marker Lens

2”

Brake Assemblies

2640

Part # 2810 2811 2742 2797

Hubs & Axles

Part # 2640 2641 2742 2718

Information

J

LIGHTS & ELECTRICAL

2”

Hitches & Towing Accessories

2775

>L.E.D.< Description Tail, Stop, Turn & Tag LH; Submersible; Under 80” Tail, Stop & Turn RH; Submersible; Under 80” Replacement Tail Light Lens Replacement Side Marker Lens

Industry Style 440LLED 440LED 440-15RLED 55-15RLED

43⁄4”

43⁄4” 53⁄16” 211⁄16”

Trailer Parts

2”

2808

Description Tail, Stop, Turn & Tag Tail, Stop & Turn Replacement Tail Lens Stop Tail Tag LH. L.E.D. Stop Tail RH. L.E.D.

Industry Style 428W 428S 420-15 428 L.E.D. 428

49⁄16” 61⁄8” 27⁄8”

2656

2”

313⁄16” 27⁄8”

2”

2629

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com

Switches

Part # 2629 2628 2730 2962 2963

49⁄16”

Brake Actuating Systems

Industry Style 452L 452 440-15R 56-15R -

Locks & Cargo Control

Description Tail, Stop, Turn & Tag LH. Submersible. Over 80” Tail, Stop & Turn RH. Submersible. Over 80” Replacement Tail Light Lens Replacement Side Marker Lens Stop Tail Tag LH. L.E.D. over 80”. Submersible Stop Tail RH. L.E.D. over 80”. Submersible

Lights & Electrical

Part # 2656 2657 2742 2797 2960 2961

Body Components

Part # 2808 2809 2729 2799

J 19


Information

J

LIGHTS & ELECTRICAL

Hubs & Axles

Stop/Turn/Tail Lights (Continued)

41⁄4”

21⁄16”

Brake Assemblies

2643-K

Part # 2643-K 2643-R 2643-A 2643-C 2642 Part #

⁄8” ⁄8”

7

Suspensions & Fasteners

2813-K

⁄8”

3

5

2813

41⁄4”

2925-K

Tires & Wheels

2813-K

⁄8” ⁄8”

7

Couplers Jacks & Winches

Part #

⁄8”

3

5

Hitches & Towing Accessories

2687-K

21⁄4” 61⁄2”

Trailer Parts

23⁄8”

2648-K

Description Tail, Stop & Turn with Grommet & Plug Tail, Stop & Turn Replacement Light Only Amber Turn/Marker Function Light Only - 2 wire Clear Backup/Utility Function Light Only - 2 wire

Industry Style 421KR 421R 421A 416

Description

Industry Style

Lights & Electrical Locks & Cargo Control

2922

Brake Actuating Systems Switches

Sealed 10 Diode L.E.D. Stop, Tail & Turn Light. Red Lens Includes Grommet and Right Angle 3 Wire Plug Operates from 8 to14 volts Red Turn Signal 10 Diode L.E.D. Clear Backup w/Grommet and Plug Clear Backup - Light Only 10 Diode L.E.D. Amber Turn Light w/Grommet and Plug Amber Turn Signal - Lamp Only

420R-3

420C 420A-3

2901

161⁄8”

J 20

2812 2911-K 2911 2922-K

Part # 2901 2835

1"

17”

15⁄8”

-

Part # 2648-K 2648-R 2648-A 2648-C

6 ⁄2”

13⁄8”

417A 418A

2687

2812-K

2812-K

417R 417R-2 418R-3

417R 417R-2 418R-3

1

13⁄8”

Industry Style

Industry Style

21⁄4”

⁄8”

Description Sealed 10 Diode L.E.D. Stop, Tail & Turn Light. Red Lens. Includes Grommet and Right Angle 3 Wire Plug. Operates from 8 to14 volts Red Turn Signal - Light Only Sealed 7 Diode L.E.D. Turn Marker Light. Amber Lens Includes Grommet and Right Angle 3 Wire Plug Operates from 8 to14 volts Amber Turn Signal - Light Only 4” Clear L.E.D.

Description

Part #

7

Industry Style 426KR 426R 2643KA 2643C 427R

Sealed 24 Diode L.E.D. Stop, Tail & Turn Light. Red Lens Includes Grommet and Right Angle 3 Wire Plug Operates from 8 to14 volts Light Only

2687-K

41⁄4”

Body Components

2925 2926

Description Tail, Stop & Turn with Grommet & Plug Tail, Stop & Turn Replacement Light Only Amber Turn/Marker Function Only - 2 wire Clear Backup/Utility Function Only - 2 wire Tail, Stop, Turn with Reflective Ring

2914

141⁄2” ⁄4”

3

151⁄2”

561.863.2220 | 800.330.1800

2914

Description 11 Diode Tail, Stop & Turn Strip - Red Lens (Sealed) 11 Diode Tail, Stop & Turn Strip - Clear Lens (Sealed) L.E.D. Slimline I.D. bar light w/auxiliary turn function. Clear lens with red L.E.D.s. 15½”(L) x 15⁄8”(H) x ¾”(D). Requires ½” hole for wires. 4 wire hook up. Submersible.

561.863.2250 | 888.330.1888

Industry Style Similar to 169-3 -

order@expediter.com


Stop/Turn/Tail Lights (Continued) Part #

Industry Style

2685

Sealed 56 Diode L.E.D.; Stop, Tail & Turn Light. Red Lens; Includes Grommet and Right Angle 3 Wire Plug Operates from 8 to 14 volts Light Only - Red

420R 420R-2 420R-3

Part #

Description

Industry Style

2804

Sealed 10 Diode L.E.D.; Stop, Tail & Turn Light. Red Lens Operates from 8 to 14 volts. Prewired; Surface Mount with 4 Hole Flange; Requires 1” Hole to Route Wires

423R

2685-K

>L.E.D.< 21⁄4” 61⁄2”

11⁄8”

2685-K Brake Assemblies

>L.E.D.<

31⁄4”

23⁄4”

61⁄4” 71⁄2”

Industry Style

Part #

Description

Industry Style

2759

Tail, Stop & Turn Light. Surface Mounts w/4 Screws 49⁄16” W x 2½” H x 1¾” D

306R

2713 2714 2715 2731 2712

Part # 2610

2723 2724

413S

53⁄16”

410-15A 414-15C 410-15R 415-15R 425S-21

43⁄8”

2612

19⁄16”

45⁄16”

23⁄8”

313-2 Body Components

2765

53⁄8”

Hitches & Towing Accessories

Description Stop, Turn & Tail Light Black ABS (Plastic) Pedestal Mount Single Face; Housing Red Lens Pedestal Mount Stop, Turn & Tail w/ Red and Amber Lenses Replacement Lens - Amber Replacement Lens - Red

2613

412

Couplers Jacks & Winches

Industry Style Tires & Wheels

Description Flush Mount Stop, Turn & Tail Light Black Plastic Housing Flush Mount Stop, Turn & Tail Light Stainless Steel Housing Replacement Lens - Amber Replacement Lens - Clear Replacement Lens - Red Replacement Lens w/ Reflex Ring - Red Snap Ring

2612

Suspensions & Fasteners

7”

2804 Part #

Hubs & Axles

Description

Information

J

LIGHTS & ELECTRICAL

313-2RA 313-15A 313-15R

15⁄16”

21⁄2”

Trailer Parts

2765

11⁄2” 3 ⁄2” 1

Lights & Electrical

13⁄4”

2759

49⁄16”

Part # 2830 2831

2906

561.863.2220 | 800.330.1800

3504 23⁄16”

3554 3336

>L.E.D.<

2907 2830

13⁄8”

2”

2”

25⁄8”

81⁄16” 27⁄8”

2831

561.863.2250 | 888.330.1888

order@expediter.com

Switches

2907

Industry Style

LH Tail, Tag, Stop & Turn Light, Submersible “Belljar” Fixture 2 Carriage Bolts, Centered or Off-center Mounting RH Tail, Stop & Turn Light, Submersible “Belljar” Fixture 2 Carriage Bolts, Centered or Off-center Mounting Lens Kit - Includes 2 Each Tail and Side Marker Lenses L.E.D. LH Tail, Tag, Stop & Turn Light Submersible Fixture. Sealed. Carriage Bolts, Centered or Off-center Mounting L.E.D. RH Tail, Stop & Turn Light Submersible Fixture. Sealed. Carriage Bolts, Centered or Off-center Mounting

Brake Actuating Systems

2744

Description

Locks & Cargo Control

Submersible

J 21


Information Hubs & Axles Brake Assemblies Suspensions & Fasteners

LIGHTS & ELECTRICAL

FUNCTION

7

8

Tail Light

P

P

Stop Light

P

P

Turn Signal

P

P

Rear Reflector

P

P

Side Light

P

P

Side Reflector

P

P

Tag Light

P

P

Rear Clearance

Submersible Stop, Turn and Tail Lights Part # 2671 2672 2673 2674

Description LH, Tail, Tag, Stop & Side; 7-Function RH, Tail, Tag, Stop & Side; 7-Function LH, Tail, Tag, Stop & Side; 8-Function RH, Tail, Tag, Stop & Side; 8-Function

Industry Style 701 WBL - 99X1 701 WBR - 99X1 801 BBL - 99X1 801 BBR - 99X1

Part # 2675 2676 2677 2678

Description LH, Tail, Tag, Stop & Side; 7-Function RH, Tail, Tag, Stop & Side; 7-Function LH, Tail, Tag, Stop & Side; 8-Function RH, Tail, Tag, Stop & Side; 8-Function

Industry Style 702 BBL - 99X1 702 BBR - 99X1 802 BBL - 99X1 802 BBR - 99X1

Part # 2679 2680 2681 2682

Description LH, Tail, Tag, Stop & Side; 7-Function RH, Tail, Tag, Stop & Side; 7-Function LH, Tail, Tag, Stop & Side; 8-Function RH, Tail, Tag, Stop & Side; 8-Function

Industry Style SP7RBW - 9LX1 SP7RBW - 9RX1 SP8RBW - 9LX1 SP8RBW - 9RX1

Part # 2644 2645 2744 271595-LH 271594-RH

Description LH Tail, Tag, Stop & Turn Light; Sealed Bulb Capsule RH Tail, Tag, Stop & Turn Light; Sealed Bulb Capsule Replacement Lens Kit - 2 Each Tail & Side Lenses

Industry Style 3504 3554 3336

LED Stop - Tail - Turn; 8-Function

-

Part # 2904 2905 2946 2947

Description Left w/License Illuminator Right w/o License Illuminator LH LED RH LED

Industry Style -

2672

2676

P

Hitches & Towing Accessories

Couplers Jacks & Winches

Tires & Wheels

J

2644

271595-LH

271594-RH

Acrylic lens and high impact housing are sonic welded for airtight “Belljar” submersible applications. Meets D.O.T. requirements including trailers over 80” wide for stop, tail, turn, rear and side reflector, rear and side marker and license illuminator. Stainless steel hardware included. 6” L x 3½” H x 2¼” D. 2904

Switches

Brake Actuating Systems

Locks & Cargo Control

Lights & Electrical

Trailer Parts

Body Components

2680

J 22

Recessed Double Tail Light (Non-Submersible)

3084529

561.863.2220 | 800.330.1800

Part # 3084529 3484010 3485750

Description Red & Red w/Red Insert Lens w/Black Base-Bagged Replacement Lens; Solid Red Replacement Lens; Red with Red Insert

561.863.2250 | 888.330.1888

Industry Style 84 -

order@expediter.com


Information

J

LIGHTS & ELECTRICAL

Marker Clearance Lights - Stud Mount Part #

2616 2824

2717 2718

114A 114R -

2615 23⁄4”

-

Brake Assemblies

2825

Industry Style

Hubs & Axles

2615

Description Side Marker Clearance Amber w/Reflex Lens ¼” Stud Mount Side Marker Clearance Red w/Reflex Lens ¼” Stud Mount Side Marker Clearance Amber w/Clear Amber Base ¼” Stud Mount Side Marker Clearance Red w/Clear Red Base ¼” Stud Mount Replacement Lens - Amber Replacement Lens - Red

21⁄8”

55-15A 55-15R

1”

Part #

2805

114ALED

>L.E.D.<

27⁄8”

21⁄8”

114RLED 55-15ALED 55-15RLED

⁄16”

15

⁄8”

5

2807

Couplers Jacks & Winches

2829 2799

Industry Style

Tires & Wheels

2807

Description L.E.D. Side Marker Clearance Amber w/Reflex Lens Operates 8 to 14 volts. ¼” Stud Mount L.E.D. Side Marker Clearance Red w/Reflex Lens Operates 8 to 14 volts. ¼” Stud Mount Replacement Lens - Amber Replacement Lens - RedReplacement Lens - Red

Suspensions & Fasteners

2717

31⁄16”

2637

Description Submersible Side Marker Clearance Red w/Reflex Lens. ¼” Stud Mount

25⁄16”

Industry Style 147R

Part #

2659 2935

2951 2952

47-99-002

21⁄8”

2659

11⁄8”

>L.E.D.<

47-99-001 J5735SA J5735SR

Industry Style 202ARS 202RRS

Brake Actuating Systems

Description Amber with Reflectors; ¼” Stud Mount Red with Reflectors; ¼” Stud Mount

2951

2691

Description Amber with Reflectors; Single Stud Mount Red with Reflectors; Single Stud Mount

561.863.2220 | 800.330.1800

Industry Style 202ARS 202RRS

561.863.2250 | 888.330.1888

2917

2918

order@expediter.com

Switches

Part # 2917 2918

Locks & Cargo Control

2936 Part # 2691 2692

Lights & Electrical

2936

Industry Style 3230 3233 3231 3234

Trailer Parts

2658

Description Submersible Clearance Marker Amber - ¼” Stud Mount (White Base) Submersible Clearance Marker Red - ¼” Stud Mount (White Base) Submersible Clearance Marker 3 Diode L.E.D. Amber - ¼” Stud Mount (Black Base) Submersible Clearance Marker 3 Diode L.E.D. Red - ¼” Stud Mount (Black Base) Amber L.E.D. - Wire thru Stud Red L.E.D. - Wire thru Stud

Body Components

111⁄16”

2637

Hitches & Towing Accessories

Part #

J 23


Information

J

LIGHTS & ELECTRICAL

Marker Clearance Lights - Grommet Mount Part #

Description 2” Sealed Amber Side Marker Clearance w/Grommet & Plug 2” Sealed Red Side Marker Clearance w/Grommet & Plug Light Only - 2” Sealed Amber Side Marker Clearance Light Only - 2” Sealed Red Side Marker Clearance

Industry Style

Industry Style

2780-K

Description 2” Sealed L.E.D. Amber Side Marker Clearance w/Grommet & Plug; 8 to 14 volts. 2” Sealed L.E.D. Red Side Marker Clearance w/Grommet & Plug; 8 to 14 volts.

Part # 2943 2944

Description L.E.D. ¾” Amber with 2 Wire Leads L.E.D. ¾” Red with 2 Wire Leads

Industry Style -

Part #

Industry Style

2635-K

Description 2½” Sealed Amber Side Marker Clearance Reflex Lens w/Grommet & Plug. Requires 3” Hole 2½” Sealed Red Side Marker Clearance Reflex Lens w/Grommet & Plug. Requires 3” Hole

2634

Light Only - 2½” Sealed Amber Side Marker Clearance;

Reflex Lens Light Only - 2½” Sealed Red Side Marker Clearance; Reflex Lens

143A

Description 2½” Sealed Amber Side Marker Clearance w/Grommet & Plug. Requires 3” Hole 2½” Sealed Red Side Marker Clearance w/Grommet & Plug. Requires 3” Hole

Industry Style

Description 2½” Sealed L.E.D. Amber Side Marker Clearance w/Grommet & Plug. 8 to 14 volts Requires 2¾” Hole 2½” Sealed L.E.D. Red Side Marker Clearance w/Grommet & Plug. 8 to 14 volts Requires 2¾” Hole

Industry Style 162A 143-18 142-49 162R 143-18 142-49

Part # 2922-K 2922

Description Sealed 10 Diode L.E.D. - Amber w/Grommet and Plug Amber L.E.D. Light Only

Industry Style 420SAK 420SA

Part #

Description Sealed Side Marker & Turn Signal w/Reflex Lens.

Industry Style

2803-K

Sealed Side Marker w/ Grommets & Plug

-

2648-A

Uses #2642-P 2 Wire Plug & #2648-G Grommet. (Sold Separately)

Amber Turn/Marker Function Light Only

421A

2648-K

Amber Turn / Marker w/ Grommet & Plug

-

Hubs & Axles

2633-K 2638-K 2633

2633-K Brake Assemblies

>L.E.D.<

2633 2638 Part #

Suspensions & Fasteners

2779-K

Tires & Wheels

2943

Couplers Jacks & Winches

2634-K ⁄16”

11

Hitches & Towing Accessories

2634-K

2635

Body Components

2783-K ⁄16”

11

Trailer Parts

2783-K

2784-K

Part # 2781-K 2781-K

Lights & Electrical Locks & Cargo Control

146A 146R

164KA 164KR

143KA 143KR

143R

21⁄2”

Part #

2782-K

2 ⁄4” 1

⁄8”

7

61⁄2”

13⁄8”

2922-K

142KA 142KR

25⁄16”

Brake Actuating Systems

61⁄2”

2803

2 ⁄4” 3

2803 21⁄4”

Switches

146R & 146-18K

2779-K

21⁄2”

J 24

146A & 146-18K

61⁄2” 23⁄8”

2648-A

561.863.2220 | 800.330.1800

Uses #2648-P 3 Wire Plug & #2648-G Grommet. (Sold Separately)

561.863.2250 | 888.330.1888

352A

order@expediter.com


Marker Clearance Lights - Surface Mount Part #

Part # 2760 2761 2734 2735

Description Side Marker Clearance Amber. Surface Mount 2-Bulb Side Marker Clearance Red. Surface Mount 2-Bulb Replacement Lens - Amber Replacement Lens - Red

Industry Style 135A 135R 135-15A 135-15R

Part # 2617 2618 2727 2728

Description Side Marker Clearance Amber. Surface Mount 2-Bulb Side Marker Clearance Red. Surface Mount 2-Bulb Replacement Lens - Amber Replacement Lens - Red

Industry Style 138A 138R 138-15A 138-15R

2632

2760

3”

21⁄8” 41⁄16”

2617

11⁄8”

2”

3”

>L.E.D.< 4”

11⁄8”

2801

3”

15⁄16” 41⁄32” 1”

2785

3”

11⁄4” 41⁄8” 13⁄32” 13⁄16” 3”

2771-K

2773-K

>L.E.D.<

Industry Style 161A & 154-11K 161R & 154-11K

11⁄4” 41⁄8” 13⁄32” 13⁄16”

2773-K

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

3”

order@expediter.com

Switches

2774-K

Description Sealed 6 Diode L.E.D. Amber Side Marker Clearance w/Black Base & Plug. 8 to 14 VDC Sealed 6 Diode L.E.D. Red Side Marker Clearance w/Black Base & Plug. 8 to 14 VDC

Brake Actuating Systems

Part #

Locks & Cargo Control

2772-K

Industry Style 2637A 154A & 154-11K 2637R 154R & 154-11K

11⁄16”

Lights & Electrical

2771-K

Description Sealed 2 Bulb Amber Side Marker Clearance w/Black Bracket & Plug Sealed 2 Bulb Red Side Marker Clearance w/Black Bracket & Plug

4”

Trailer Parts

Part #

Industry Style Bargman #99A Bargman #99R 30-99-012 30-99-010

21⁄16”

Body Components

2826 2827

Description Side Marker Clearance Amber w/Reflex Lens 3 Hole Centers Side Marker Clearance Red w/Reflex Lens 3 Hole Centers Replacement Lens - Amber Replacement Lens - Red

2631

Hitches & Towing Accessories

2786

Replacement Lens - Amber Replacement Lens - Red

15⁄32” 3”

Couplers Jacks & Winches

2785

108-15A 108-15R

Industry Style 138A-LED 138R-LED 138-15A 138-15R

10 Diode L.E.D. Amber Side Marker Clearance.8 to 14 VDC 10 Diode L.E.D. Red Side Marker Clearance.8 to 14 VDC

4”

Suspensions & Fasteners

Part #

Description

108WR

Brake Assemblies

Part # 2801 2802 2727 2728

108WA

Hubs & Axles

2631

Tires & Wheels

Industry Style

2719 2720

Description Side Marker Clearance Amber w/Reflex Lens Single Bulb. 3” Hole Centers Side Marker Clearance Red w/Reflex Lens Single Bulb. 3” Hole Centers Replacement Lens - Amber Replacement Lens - Red

Information

J

LIGHTS & ELECTRICAL

J 25


LIGHTS & ELECTRICAL

Marker Clearance Lights - Surface Mount (continued) Part #

11⁄2”

2625-K

Brake Assemblies Suspensions & Fasteners

27⁄8”

1” 2”

Tires & Wheels Couplers Jacks & Winches

23⁄4”

Clearance Light Only. 8 to 14 VDC Sealed 3 Diode L.E.D. Red Side Marker Clearance Light Only. 8 to 14 VDC

153A

Part # 2747 2748

Description 2¾” Amber Side Marker Clearance; Surface Mount 2¾” Red Side Marker Clearance; Surface Mount

Industry Style 102A 102R

Part #

Description L.E.D. Sealed 3 Diode Amber Side Marker Clearance w/Ear Mounting Tabs L.E.D. Sealed 3 Diode Red Side Marker Clearance w/Ear Mounting Tabs

Industry Style

Description

Replacement Lens - Amber Replacement Lens - Red

Industry Style 107WA 107WR 107-15A 107-15R

Part # 2697 2698

Description Chrome Armored Amber Side Marker Clearance Chrome Armored Red Side Marker Clearance Light

Industry Style 122XA 122XR

Part # 2619 2620 2721 2722

Description Steel Armored Amber Side Marker Clearance Light Steel Armored Red Side Marker Clearance Light Replacement Lens - Amber Replacement Lens - Red

Industry Style 119A 119R 119-15A 119-15R

Part # 2977 2978

Description L.E.D. Steel Armored Amber Side Marker Clearance Light L.E.D. Steel Armored Red Side Marker Clearance Light

Industry Style 119A LED 119R LED

Part # 2915 2916 2819 2820

Description

Industry Style -

2815

150KR 150A 150R

153KA 153KR

153R

2747

Hitches & Towing Accessories

2919

11⁄16”

2920 11⁄16”

Body Components Trailer Parts

Sealed 3 Diode L.E.D. Amber Side Marker

150KA

11⁄16” 11⁄2”

Part # 2621 2622 2725 2726

1” 33⁄16”

11⁄8”

3273

Side Marker Clearance Amber. 2¾” Mounting Centers10 Side Marker Clearance Red. 2¾” Mounting Centers

2621

23⁄4”

Lights & Electrical

3272

2919

21⁄8” 425⁄32” 13⁄8”

2697

37⁄8”

Locks & Cargo Control

2814

2814-K

11⁄2”

33⁄16” 23⁄4”

37⁄8” 2”

13

⁄16”

11⁄2”

Brake Actuating Systems

Industry Style

2815-K

Description Sealed 3 Diode L.E.D. Amber Side Marker Clearance w/Chrome Bracket & Plug. 8 to 14 VDC Sealed 3 Diode L.E.D. Red Side Marker Clearance w/Chrome Bracket & Plug. 8 to 14 VDC

2625 2626 Part #

2814-K

2619

37⁄8”

25⁄8” 2” 11⁄8”

Switches

Industry Style

2626-K 1” 2”

J 26

Description Sealed Amber Side Marker Clearance w/Chrome Bracket & Plug Sealed Red Side Marker Clearance w/Chrome Bracket & Plug Replacement Light Only. Sealed Amber Side Marker Replacement Light Only. Sealed Red Side Marker

2625-K

27⁄8”

Hubs & Axles

Information

J

⁄16”

11

2915

561.863.2220 | 800.330.1800

Sealed Clear Lens w/Amber L.E.D.s; Requires ½” Hole

Sealed Clear Lens w/Red L.E.D.s; Requires ½” Hole Sealed L.E.D - Amber Lens - Requires ½” Hole Sealed L.E.D - Red Lens - Requires ½” Hole

561.863.2250 | 888.330.1888

order@expediter.com


Fender Market Lights Part # 2828

Part #

3” Hole Centers; Grounds through Mount Screw

Industry Style Bargman #40 Similar to Bargman #40

⁄4” Pair Mini L.E.D. Fender Lamp Assembly 3⁄4” Lights

-

2791 2787 2790

Dual Function Red/Amber Marker Light; Surface Mount. 3

13⁄8”

15⁄16”

⁄2”

1

3 ⁄8” 5

Brake Assemblies

Description Dual Function Red/Amber Marker Light Requires 3⁄8” Hole. 2-Wire Hook-Up

2828

2791 ⁄16”

11

⁄4”

3

3”

31⁄2”

Back-up, Utility & Courtesy Lights 2666

Description Interior Dome Light w/Push Button Switch Surface Mounts w/4 Screws

Industry Style

21⁄2”

13⁄4”

11⁄2”

391C

4 ⁄16” 9

31⁄2”

Industry Style 385S

Part # 2668 2669

Description Interior Dome Light; 2 Screws Mount Interior Dome Light; 3 Screws Mount

Industry Style 390S 389S

Part # 2794

Description Chrome Plated Brass Mini Utility; Courtesy Light

Industry Style 434

2667

2668

Couplers Jacks & Winches

Description Utility Light

Tires & Wheels

2666 Part # 2667

Suspensions & Fasteners

2787 Part #

Hubs & Axles

2828-AR

Description Industry Style Dual Function Red/Amber Marker Light with Bracket 4 Screw Mount. 13” Wire Red/Amber Light Only -

Information

J

LIGHTS & ELECTRICAL

2669

2”

Industry Style 392C

Body Components

Description Multi-Purpose Clear; Back-Up; Interior; Courtesy Light

15⁄16”

31⁄4”

17⁄16”

2649 Description Surface Mount Interior Courtesy Light w/Rocker Switch

Industry Style 433S

1”

23⁄8” 41⁄8” 23⁄16”

2660

2823

Description Par 36; Molded Rubber Housing; Tractor; Implement; Utility Light

43⁄4”

Industry Style 507

513⁄16” 215⁄16”

2823 Description Clear Backup/Utility Function Only - 2 wire Clear Backup/Utility Function Only - 2 wire (L.E.D.)

Industry Style 2643C -

41⁄4” 51⁄16”

2643-C Description Clear Backup/Utility Function Light Only - 2 wire

Industry Style 416

21⁄4”

2648-C Description Clear Backup/Utility Function Light Only Clear Backup with Grommet and Plug Clear Backup 4” Round L.E.D.

561.863.2220 | 800.330.1800

Industry Style 420C 420C -

>L.E.D.<

21⁄4”

61⁄2” ⁄8”

7

2911

561.863.2250 | 888.330.1888

13⁄8”

order@expediter.com

Switches

Part # 2911 2911-K 2926

6 ⁄2” 1

Brake Actuating Systems

Part # 2648-C

Locks & Cargo Control

Part # 2643-C 2926

Lights & Electrical

Part #

Trailer Parts

Part # 2660

Hitches & Towing Accessories

29⁄16”

2794 Part # 2649

⁄16”

15

13⁄16”

J 27


Information Hubs & Axles Brake Assemblies

J

LIGHTS & ELECTRICAL

Identification Bar Lights 2942

147⁄8” 81⁄2” 11⁄4”

Part # 2942

Red ¾” L.E.D. Lights: Sealed, Black, Plastic

Description

Industry Style -

Part # 2661 2662

Description Sealed Amber 3 Light Black Poly. I.D. Bar w/Harness Sealed Red 3 Light Black Poly. I.D. Bar w/Harness

Industry Style Similar to150-3A Similar to150-3R

Part #

Description L.E.D. Sealed Amber 3 Light Black Poly. I.D. Bar w/Harness L.E.D. Sealed Red 3 Light Black Poly. I.D. Bar w/Harness

Industry Style Similar to 150-3ALED Similar to 150-3RLED

Description

Industry Style Similar to 107-3A Similar to 107-3R 107-15A 107-15R

1”

2661

17⁄16” 17” 15⁄8”

Suspensions & Fasteners

71⁄2”

2816

15⁄8”

Tires & Wheels Couplers Jacks & Winches

17⁄16” 17”

143⁄8” 13⁄8”

2623

17⁄16”

Hitches & Towing Accessories Body Components Trailer Parts Lights & Electrical

141⁄4”

2770

Locks & Cargo Control Brake Actuating Systems

13⁄16” 81⁄2” 15⁄8”

141⁄4”

2912

13⁄16” 81⁄2”

Part # 2623 2624 2725 2726

Amber 3 Light. I.D. Bar White Steel Bar

Red 3 Light. I.D. Bar White Steel Bar Replacement Lens - Amber Replacement Lens - Red

Part # 2770

Sealed Red 3 Light ID Bar - Stainless Steel

Part # 2912

Sealed Red L.E.D. Bar Light - Stainless Steel Bar

Description

Description

Industry Style 151-3R

Industry Style Similar to151-3R

15⁄8”

>L.E.D.< Part # 2901

Switches

2817

71⁄2”

151⁄16”

J 28

2816

Industry Style

2900

Description Red polycarbonate lens is sonic welded to housing Slim design fits applications requiring minimal space Voltage 8-14 VDC. 11-Super L.E.D.s. 3 wire hook up L.E.D. Slimline I.D. bar light w/auxiliary turn function. Clear lens with red L.E.D.s. 15½”(L) x 15⁄8”(H) x ¾”(D). Requires ½” hole for wires. SUBMERSIBLE. 4 wire hook up L.E.D. Amber lens 11 diode, 2 wire hook up. 15½”(L) x 15⁄8”(H) x ¾”(D). Requires ½” hole for wires.

Part # 2699

Description Red; Bar can be bent to fit V of trailer

Industry Style 327RBX - 9962

13⁄8” 161⁄8” 1”

2901

17”

>L.E.D.< 2914 2914

15⁄8” 141⁄2” ⁄4”

3

Similar to 169-3 150KR -

151⁄2”

2699

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com


Information

J

LIGHTS & ELECTRICAL

Grommets Industry Style

2633-G

Grommet for 2” clearance lights. Flush mount. Requires 25⁄16” mounting hole. Fits Peterson 145, 146, 164, 165, 166 & similar competitors’ lights.

146-18

2638-G

Grommet for 2” lights. 25⁄16” mounting hole.

146-184

Part #

Description

Industry Style

2635-G

Grommet for 2½” sealed units to be recess mounted. Requires 2¾” mounting hole.

151-3R

23⁄4”

21⁄2”

⁄8”

7

2633-G 13⁄16”

225⁄32”

31⁄4”

Suspensions & Fasteners

2635-G Description

Industry Style

2634-G

Grommet for 2½” clearance lights. Flush mount. Requires 3” mounting hole. Fits Peterson 142, 143, 164, 162, 163 & similar competitors’ lights.

142-18

Description

Industry Style

213⁄16”

31⁄2” ⁄4”

3

2634-G

⁄2”

1

31⁄4”

Part #

Grommet used to flush mount Peterson 150,153 & similar competitors’ lights on metallic and non-metallic surfaces.

2.88 x 1.53 cutout max 0.17” thickness

2624-G

150-181

⁄2”

1

31⁄4”

3.00 x 1.65 cutout max 0.25” thickness

Hitches & Towing Accessories

2625-G

115⁄16”

150-18

Couplers Jacks & Winches

2624-G

Tires & Wheels

Part #

115⁄16”

2625-G Description

Industry Style

2643-G

Grommet for 4” round lights. Flush mount. Requires 4½” mounting hole. Used w/Peterson 415, 417, 426, 427 & similar style competitors’ lights.

426-18

51⁄4”

41⁄2”

1”

2643-G Description

Industry Style

2648-G

Grommet for 6½” oval lights. Flush mount. Used with Peterson 350, 352, 416, 420, 421 or similar style competitors’ lights.

2.44 x 6.65 oval cutout max 0.25” thickness

421-18

33⁄8”

Trailer Parts

Part #

Body Components

Part #

61⁄2”

75⁄8”

2648-G

1”

Lights & Electrical

41⁄4”

Description

Industry Style

1311

Snap-in bracket for mounting 4” round lights. Converts grommet mounted lights to 3 hole flange mount.

426-09

⁄8”

7

1”

1311

Guard/Trim Ring

23⁄8”

Industry Style

2611

Chrome plated; Steel guard. Fits #2617 or 2618 lamps; 2 mounting holes. 4¾” hole centers

B106-09

Part #

Description

Industry Style

1306

Chrome trim; Steel guard. Ring for oval L.E.D.

423

4 ⁄4” 3

11⁄8”

2611

5 ⁄16” 7

35⁄8”

⁄2”

1

1306

561.863.2250 | 888.330.1888

77⁄8”

order@expediter.com

Switches

Description

Brake Actuating Systems

Part #

561.863.2220 | 800.330.1800

51⁄2” 49⁄16”

Locks & Cargo Control

Part #

Brake Assemblies

Description

Hubs & Axles

Part #

J 29


Information

J

LIGHTS & ELECTRICAL

Mounting Brackets

1⁄” 5

8

Hubs & Axles

61⁄4” 611⁄16” 25⁄8”

4”

Part #

Description

Industry Style

1315

Black painted steel bracket. Designed for mounting 6½” oval series lights.

421-09

Part #

Description

Industry Style

1317

Black painted steel mounting for 4” round style lights. Designed w/4½” hole for mounting 4” lights.

426-09

Part #

Description

Industry Style

1324

Fits 2” round grommet mounted lights that require a 25⁄16” hole. 3” bolt centers

-

Part #

Description

Industry Style

1326

Fits 2½” round grommet mounted lights that require a 225⁄32” hole. 3” bolt centers

-

81⁄4”

Brake Assemblies

1315

6”

41⁄2”

4”

513⁄16”

1317

4”

13⁄4”

43⁄4”

Tires & Wheels

Suspensions & Fasteners

13⁄8”

25⁄16”

1324 Couplers Jacks & Winches

4”

13⁄4”

43⁄4” 2 ⁄32”

1326 2”

11⁄2”

2 ⁄8” 7

1316

Brake Actuating Systems

Part # 1314

Black bracket, gasket, screws & wire.

Industry Style 150-102

⁄2”

11⁄2”

1314

27⁄8”

Industry Style 150-092

⁄2”

41⁄16” 3”

1305

Description

1

Part #

Description Black bracket, terminal pad with molded lead. Can be used with 2 wire plug #2630-P (Sold Separately) when mounting to non-metallic surface. Bracket for #2828 Fender Mount Light

Industry Style

Part #

Description

Industry Style

1325

Designed with 4½” hole for all 4” diameter grommet mounted lamps

426-10

Part #

Description

Industry Style

1318

Molded polycarbonate mounting adapter allows 2½” diameter sealed units to be surface mounted

142-09

1305

⁄2”

1

2828-B

11⁄16”

154-11 -

2828-B 21⁄8”

127⁄8”

1325 21⁄4”

Switches

Chrome bracket, gasket, screws & wire.

Description

1

73⁄4”

J 30

Part # 1316

2”

Locks & Cargo Control

Lights & Electrical

Trailer Parts

Body Components

Hitches & Towing Accessories

25

23⁄4”

41⁄2” 3” ⁄8”

7

1318

5 ⁄8” 3

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

order@expediter.com


LIGHTS & ELECTRICAL

Mounting Brackets (continued) Description Galvanized Bracket; Bolt-on

Industry Style -

Hubs & Axles

Part # 1309

1309 Description Steel, Black Enamel Bracket; Weld or Bolt-on

Industry Style 510-9

Brake Assemblies

Part # 1310

Description

Suspensions & Fasteners

1310 Part # 1312

Industry Style -

Oiled Steel; Weld-on

Information

J

1312 Industry Style

1319

-

Description

Industry Style -

Attaches tail lights to boat cleats with bungee cords (not included)

Part # 1313

Side Marker Bracket; Weld-on

Couplers Jacks & Winches

Description Cleat Mount Bracket - Plastic

Tires & Wheels

Part #

1313

1320

1322

1328

1329

1334

1332

Hitches & Towing Accessories

1319

Light Boxes RH Part #

1320 1322

1321 1323

1329

LH Part #

RH Part #

1334

1335

Industry Style -

Description Steel; Fits lights up to 61⁄2” x 51⁄8” x 3”

Industry Style -

Description

Locks & Cargo Control

Part # 1332

Description Steel; Fits lights up to 51⁄4” x 49⁄16” x 27⁄8”

Industry Style -

Tail Light Box; Oval

For PVC Boat Guides Description 1 pair galvanized steel, bolt-on, heavy-duty brackets for tail lights. Light bracket kit, brackets, hardware, wire and connectors for existing lights.

1235

561.863.2220 | 800.330.1800

561.863.2250 | 888.330.1888

1239

order@expediter.com

Switches

Part # 1235 1239

Brake Actuating Systems

Light Brackets

Lights & Electrical

RH Part #

1328

Industry Style 428 440

Trailer Parts

LH Part #

Description Steel; Fits lights up to 313⁄16” x 313⁄16” x 27⁄8” Steel; Fits lights up to 5¼” x 49⁄16” x 27⁄8”

Body Components

LH Part #

J 31


LIGHTS & ELECTRICAL

License Brackets Part # 2590 2592 2818

Hubs & Axles

Information

J

Suspensions & Fasteners

Brake Assemblies

2590

2592

Description Plastic Tag Bracket

Zinc Plated Steel Tag Bracket Tag Bracket with Hardware - Zinc Plated

Industry Style 440-09 428-09 -

License Light w/License Bracket

2818 Part # 2594

31⁄2”

2594

63⁄8”

Industry Style 436B

2821

Description License Light with Steel Bracket Submersible License Light with Plastic Bracket. Requires #2630-P plug (NOT included)

2954

Tag Bracket Frame with Light

-

439B

Tires & Wheels

27⁄8” 2 ⁄8” 3

License Lights 2630 | 2930

Part #

31⁄4”

Couplers Jacks & Winches

2630 13⁄4”

2716

25⁄16”

Body Components

Hitches & Towing Accessories

2663 2663

2930 21⁄2” 2”

2769

23⁄4”

2”

Part # 2769 2794

Description Industry Style License Plate Light. 436 Plastic Hood with Stainless Steel Mounting Bracket Replacement Lens for #2630 436-25 L.E.D. License Plate Light. Black body with clear light. J605 3¾” L, 21⁄8” H, 3” D L.E.D. License Plate Light. Gray Plastic Hood. 436LED Stainless Steel Ear Mount on 3¼” Centers. Description Chrome Plated Steel Chrome Plated Brass Mini Utility; Courtesy Light

Industry Style 435 434

13⁄16”

2794

15

11⁄2”

⁄16”

2”

Brake Actuating Systems Switches

J 32

Snap-In License/Utility Light Part #

Description

Industry Style

2670

Chrome Plated Brass License Plate or Interior Light. Snaps into 1¼” diameter hole. Two required for legal license illumination

438

Trailer Wire Harnesses

2670 Part #

Locks & Cargo Control

Lights & Electrical

Trailer Parts

29⁄16”

5425

5425

5442

561.863.2220 | 800.330.1800

5436 5426 5430 5435 5433 5437 Part # 5442

Description

Industry Style

25’ Split Wishbone with 18” Ground Wire & 48” Vehicle Trunk Connector with18” Ground Wire 15’ Split Wishbone with 30” Ground Wire 25’ Split Wishbone with 30” Ground Wire 30’ Split Wishbone with 30” Ground Wire 35’ Split Wishbone with 30” Ground Wire 40’ Split Wishbone with 30” Ground Wire 45’ Split Wishbone with 30” Ground Wire

B5425Y B5415Y B5426Y B5430Y B5435Y B5440Y B5445Y

Description 5-way flat; 35’ with 48” ground and 60” auxiliary for back-up solenoid

561.863.2250 | 888.330.1888

order@expediter.com


Reflectors Description 33⁄16” Amber Round Reflector with Adhesive Backing 33⁄16” Red Round Reflector with Adhesive Backing Amber Reflector with Mounting Holes & Adhesive Back Red Reflector with Mounting Holes & Adhesive Back Amber Reflector & Adhesive Back Red Reflector & Adhesive Back

Industry Style 475A 475R 480A 480R 483A 483R

315⁄16”

33⁄16”

115⁄16”

17⁄16” 47⁄16”

33⁄16”

Hubs & Axles

Part # 2736 2737 2700 2701 2788 2789

2788 | 2789

2700 | 2701

2740

Aggressive, Permanent Adhesive; Kiss Cut in 12” Lengths

Industry Style 7”

-

11”

6”

687RS

2703

6”

kiss cut

kiss cut

Road Side Reflector Kit Description Triangle Reflector Kit; D.O.T. Approved

2740 Tires & Wheels

Part # 2710

Industry Style 449

2630-PLW 2661-P

2642-P 2648-P

Clearance and Marker Lights, and all competitive models.

B5415Y

2630-P

Same as #2630-P with 13” leads Plug for Bar Light Straight 3-wire molded plug for Double Contact Sealed Stop/Tail/Turn Lamps Right angle 2-wire molded plug for Double Contact Sealed Stop/Tail/Turn Lamps Right angle 3-wire molded plug for Double Contact Sealed Stop/Tail/Turn Lamps

B5426Y B5430Y

Single Wire Plug 2-wire molded plug for use w/142, 143, 145, 146 & 150 Series

B5435Y

Body Components

2643-P

2627-P

Hitches & Towing Accessories

2630-P

Industry Style B5425Y

Description

Couplers Jacks & Winches

2710

Trailer Wire Harnesses Part # 2627-P

2661-P

B5440Y B5445Y

Light Bulbs 168 Clearance Light Bulb 194 Clearance Light Bulb 193 Clearance Light Bulb 1893 Clearance Light Bulb 1895 Clearance Light Bulb 1157 Tail, Stop & Turn 67 Clearance Bulb 1156 Bulb

Replaces standard 1157 style bulb; Clear lens w/red diodes Replaces standard 194 style bulb; Clear light

2795

2767

Industry Style 1157-LED 194-LED

2757

2756

Brake Actuating Systems

Description

2764

Description

SV-6006

12-volt amber strobe light, used on sheds, barns or other areas without clearance or tail lights.

561.863.2220 | 800.330.1800

78710

561.863.2250 | 888.330.1888

SV-6006

order@expediter.com

Switches

Strobe Light Part #

Locks & Cargo Control

Industry Style 3 CP 2 CP 3 CP 2 CP 2 CP 32/3 CP -

Lights & Electrical

Part # 78710 78706

Description

Trailer Parts

2648-P

2643-P

Part # 2798 2764 2768 2793 2795 2757 2767 2756

Suspensions & Fasteners

2703

Description 2” x 150’ Roll. 11” Red & 7” White (Silver) Aggressive, Permanent Adhesive 2” x 150’ Roll. 6” Red & 6” White (Silver)

Brake Assemblies

2736 | 2737

Reflective Conspicuity Tapes Part #

Information

J

LIGHTS & ELECTRICAL

J 33


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.