LOCKS & CARGO CONTROL
LOCKS & CARGO CONTROL
Couplers Jacks & Winches Hitches & Towing Accessories Body Components Trailer Parts Lights & Electrical Locks & Cargo Control Brake Actuating Systems Switches
561.863.2250 | 888.330.1888
Tires & Wheels
561.863.2220 | 800.330.1800
Suspensions & Fasteners
K
Logistic Track Fittings Series E or A Decking/Shoring Beam Series E Track k18 Weld-On Webbing Winches Portable Webbing Winches Lashing Webbing Winch Standard Winch Straps Winch Bar & Slider Track k19 Ratchet Tie Down Heavy-Duty Cam Buckle Straps E-Track Ratchet Straps Wheel Tiedowns k20 Long Handle Ratchet Strap Assemblies Extra Long Wide Handle Ratchet Strap Assemblies Ratchet Buckles k21 Cargo / RV Door Latch Stake Pockets Slam Locks Heavy-Duty Aluminum Door Holdback Rack Connector Set Corner Stake k22 Spring Latches Door Latch Kit Door Handles Door Handle Cam
Brake Assemblies
K2 Pins K17 K3 Universal Ball Coupler Locks K17 k4 Lip Engaging Ball Coupler Locks K17 Lip Engaging Ball Coupler Locks K18 Total Encasement Ball Coupler Locks K18 k5 Ball Coupler Latch Locks K18 k6 Ball Mount/Receiver Hitch Locks - Barbell Style K18 k7 Ball Mount/Receiver Hitch Locks - Bent Pin Style K18 k7-8 Keyed Alike Lock Sets K19 k8 Lunette Eye/Draw Bar Locks K19 k8 King Pin Locks K19 k9 Gooseneck Coupler Locks K19 k9 Spare Tire Locks K20 k10 Trailer Wheel Locks K20 k11 Hidden Shackle Locks K20 k11 Shielded Padlock K21 k11 Cable Locks K21 k12 Hooks K21 k13 Chain - Proof Coil Grade 30 K21 Safety Chain Anchor K21 Safety Cable Assemblies K21 k14 Lever Binders K22 Ratchet Binders K22 Load Binder Chain Assemblies K22 k15 Pan Fittings w/Rings K22 Surface Mounted Rope Ring Flush Mount k16 Bolt-On D-Ring Assemblies Forged D-Ring Assemblies k17 Grab Hook
Hubs & Axles
K2 K3 K4 K4 K4 K5 K6 K7 K7-8 K8 K8 K9 K9 K10 K11 K11 K11 K12 K13 K13 K13 K14 K14 K14 K15 K15 K15 K16 K16 K17
Information
K
order@expediter.com
K1
Information
LOCKS & CARGO CONTROL
1
1
Suspensions & Fasteners Tires & Wheels
3
1124 6
18402 7
18414
7
8
18403 7
18412 9
18410
18400 10
9
D A
C
66000
Lynch Pin/Click Pin
Part # 2558 2560 74149 1376DAT
Pin Diameter
Part # 1124 1126 1128
Wire Diameter
FHP126 7
Usable Length ½” 2” 5 ⁄8” 3” 5 ⁄8” 2½” 5 ⁄8” & ½” bent pin w/stainless sleeve
Hairpin Clip
2
⁄64” 1 ⁄8” 5 ⁄32”
5
Part # 18402 18403 18407
Pin Diameter ⁄16” 5 ⁄8” 5 ⁄8”
9
Usable Length 2½” 3½” 3¼”
Pin Diameter ⁄16”
9
Safety Spring Pin
5 Part # 18414 18415
Pin Diameter ½” 5 ⁄8”
Usable Length 3½” 43⁄8”
Safety Spring Pin PTO Pin Part # 18412 18413
Pin Diameter ⁄16” 3 ⁄8”
5
Usable Length 2¼” 2¼”
561.863.2220 | 800.330.1800
Usable Length 1½” 23⁄4” 3” 41⁄2”
⁄4” 5 ⁄16” 1 ⁄4” 1 ⁄4” 1
A
Diam. Width
B
Usage Length
C
Loop Clearance
1.75” 1.38” 1.75”
.25” .19” .31”
1.50” 1.10” 1.44”
Ring Hitch Pin w/Hairpin Clip Part # 18419 66100 FHP126 66103 66105 66110 66115 66120 66125
Usable Length 23⁄4”
Pin Diameter
Lynch Pin/Click Pin Part # 66000 66003 66006
9
66045
(Wire Lock Pin)
Wire Lock Pin w/Chain or cable
8
Pin w/ Ring, Chain & Lynch Pin Part # 18405
66100
Part # 18410 18400 3006875 3017021
Usable Length 13⁄16” 29⁄16” 3”
Detent Pin with Chain
3
6
C
Bent Pin w/Hairpin Clip
1
4
B
B
A
3006875
Couplers Jacks & Winches Hitches & Towing Accessories Body Components
3
1376DAT 5
18405
Trailer Parts Lights & Electrical Locks & Cargo Control Brake Actuating Systems Switches
K2
2
2558 4
Brake Assemblies
Hubs & Axles
K
Pin Diameter
Usable Length 3½” 4¼” 6¼” 4¼” 6¼” 4¼” 6¼” 6¼” 6¼”
½” ½” ½” 5 ⁄8” 5 ⁄8” ¾” ¾” 7 ⁄8” 1”
Wire Lock Pin (No Chain)
10 Part # 66045 66050 66053 66056 66060 66063 66066
A
Dia.Width
⁄16” ¼” 5 ⁄16” 3 ⁄8” 3 ⁄8” ¼” ¼”
3
561.863.2250 | 888.330.1888
B
C
15⁄8” 113⁄16” 27⁄16” 117⁄32” 211⁄32” 2½” 3”
19⁄16” 1½” 1¾” 117⁄32” 137⁄64” 113⁄16” 1½”
Usage Length Loop Clearance
D
Pin Length
113⁄16” 2” 225⁄32” 15⁄8” 2½” 249⁄64” 3¼”
order@expediter.com
LOCKS & CARGO CONTROL Blaylock EZ Lock Made in the USA of heavy grade aircraft aluminum and will not rust. Features a ¾” steel locking pin, for use with the heavy-duty shielded padlock (not included).
Information
K
Hubs & Axles
TL33
TL20
Fits all Hammerblow Bulldog forged 17⁄8”, 2” and 25⁄16” trailer couplers and similar styles. Padlock not included. Order lock #40DAT separately.
Tires & Wheels
Description Fits trigger style couplers (Fulton, Shelby, D&L…), Atwood rolled lip and helmet style. UFP couplers and actuators and many others. Made in the USA. Padlock not included. Order lock #40DAT separately.
TL33
Suspensions & Fasteners
Part #
Brake Assemblies
Universal Ball Coupler Locks
Secures trailers when parked, by covering the ball cavity to prevent towing. This style lock fits most couplers with, or without a lip around the ball cavity.
TL20 Couplers Jacks & Winches
UTL100 UTL100-K
Replacement key precut - Special Order
Body Components
Pin Diameter Universal trailer coupler lock, fits most 17⁄8”, 2” & 25⁄16” couplers
Hitches & Towing Accessories
Part #
UTL100
379ATPY
Commercial version - rekeyable. Dark gray or black finish. The cylinder plug in the #379ATPY uses the Python™cylinder mechanism but the plug cannot be interchanged with other Python™cylinders.
379DAT
UMAX100 UMAX50
UNIVERSAL “Die-Cast” dual purpose coupler lock (Fits ALL couplers)
UMAX100
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
UMAX50
order@expediter.com
Switches
Description Premium UNIVERSAL 360° of “Solid Hardened Steel” dual action coupler lock (Fits ALL couplers)
Brake Actuating Systems
Part #
379ATPY
Locks & Cargo Control
379DAT
Lights & Electrical
Description Fits 17⁄8”, 2”, and 25⁄16” couplers manufactured by Reese, Fulton, Valley, Atwood, Shelby, Putnam, HammerBlow, Dutton Lainson & UFP. Advanced locking mechanism resists picking and prying.
Trailer Parts
Part #
K3
LOCKS & CARGO CONTROL
Blaylock EZ Lock
Made in the USA of heavy grade aircraft aluminum and will not rust.
Heavy duty one-piece lock with a 7⁄8” steel pin and push lock. Constructed with extra large crown to house tumbler. Locks and unlocks from the front.
Hubs & Axles
Information
K
Brake Assemblies
Lip Engaging Ball Coupler Locks
Suspensions & Fasteners
Secures trailers when parked, by covering the ball cavity to prevent towing. This style lock engages the lip around the ball cavity, and has a locking mechanism that extends into the ball cavity to prevent removal.
TL34
Fits most 17⁄8” and 2” trigger-style couplers with flat lip flange around ball cavity. Fits heavy duty 2” couplers with flat lip flange around ball cavity. Fits heavy duty 2” and 25⁄16” couplers with rolled lip flange around ball cavity.
Description
Part # 11211 11212 11213 11212-K
Fits most 17⁄8” stamped couplers Fits most 2” stamped couplers Fits most 25⁄16” stamped couplers Replacement key precut - Special Order
11211
11212-K
Body Components
Hitches & Towing Accessories
Couplers Jacks & Winches
Tires & Wheels
TL38
Part # TL38 TL36 TL34
Lip Engaging Ball Coupler Locks
Locks & Cargo Control
Lights & Electrical
Trailer Parts
Secures trailers when parked, by covering the ball cavity to prevent towing. This style lock engages the lip around the ball cavity to prevent removal.
377DAT
Part #
Description
377DAT
Fits 17⁄8” & 2” couplers with flat flange around ball cavity Adjusts to fit many makes and models
377KA
Same as #377DAT, but keyed alike
378DAT
Fits 2 ⁄16” couplers with flat flange around ball cavity Adjusts to fit many makes and models 5
378DAT
Total Encasement Ball Coupler Locks
Brake Actuating Systems Switches
K4
Bolt Pattern
Part #
Note
Description
TL22
Secures trailers when parked, by covering the ball cavity to prevent towing.
Fits 2” Bulldog Forged Style Couplers
TL23
Fits 25⁄16” Bulldog Forged Style Couplers
TL22
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
order@expediter.com
LOCKS & CARGO CONTROL Secures trailers when parked or in tow by preventing operation of the ball latch.
Usable Length 7 ⁄8”
Brake Assemblies
Pin Diameter ¼”
Hubs & Axles
Part # 7001100
7001100
Usable Length 7 ⁄8”
Part # 2566
Pin Diameter ¼”
Usable Length 2”
2556 (in use)
2556
Tires & Wheels
Pin Diameter ¼”
Part # 1471DAT
Pin Diameter 9 ⁄32”
Usable Length 3½”
2578
2578 (in use)
Body Components
Usable Length 21⁄2”
1471DAT Pin Diameter ¼”
TMC10
¼”
Trailer Parts
Part # 11215
Usable Length 3 ⁄4” ⁄8”
7
2847DATSC
Description Solid brass body with ¾” opening 9 ⁄32” case hardened steel shackle Stainless steel, adjustable coupler latch lock
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
605DAT
2847DATSC
order@expediter.com
Switches
605DAT
LL104
Brake Actuating Systems
Part #
Locks & Cargo Control
LL104
Description ¼” pin fits coupler latches up to 5⁄8” wide. Also use on trailer door latches, storage units or cargo & toolboxes. Stainless steel construction with patented ball-bearing locking system. O-rings inside and rubber cap keep out moisture and dirt. Lifetime warranty.
Lights & Electrical
TMC10
11215
Part #
Hitches & Towing Accessories
Pin Diameter ¼”
Couplers Jacks & Winches
2566
Part # 2578
Suspensions & Fasteners
Part # 2556
Information
Ball Coupler Latch Locks
K
K5
LOCKS & CARGO CONTROL
Ball Mount/Receiver Hitch Locks - Barbell Style
Secures ball mounts and hitch mounted accessories like bike racks and cargo carriers.
Part # Pin Diameter x Usable Length 2568 ½” x 2¾”
Description For Class I and Class II hitches with 1¼” square tubes
2568
NOTE: Can be ordered keyed alike for an additional charge
TS32
Part #
Description
TS32
Fits both 5⁄8” (16mm) & ½” (13mm) receiver holes 2½” (64mm) long shackle; Keyed different
Tires & Wheels
Suspensions & Fasteners
Brake Assemblies
Hubs & Axles
Information
K
1480DAT 1480KA
Stainless steel; Fits 5⁄8” (16mm) receiver holes; 2½” (64mm) long shackle
Keyed Alike
Stainless steel; Fits 5⁄8” (16mm) receiver holes; 2½” (64mm) long shackle
1469DAT
Stainless steel; Fits 5⁄8” receiver holes; 3½” long
Part # Pin Diameter x Usable Length LL100
2569
LL100
⁄8” x 2½”
5
Description Stainless Steel; Lifetime Warranty; For Class III and IV hitches with 2” square tubes
Part # Pin Diameter x Usable Length 5 2569 ⁄8” x 211⁄16”
Description For Class III and IV hitches with 2” square tubes
Part # Pin Diameter x Usable Length 5 2569-1 ⁄8” x 211⁄16”
Description For Class III and IV hitches with 2” square tubes
Switches
Brake Actuating Systems
Locks & Cargo Control
Lights & Electrical
Trailer Parts
Body Components
Hitches & Towing Accessories
Couplers Jacks & Winches
1480DAT
K6
2569-1
2492
3429
2490
NOTE: Can be ordered keyed alike for an additional charge
Part # Pin Diameter x Usable Length 5 2492 ⁄8” x 2¾” 3429
5
Rapid Hitch for Class V hitches with 2½” square tube
Part # Pin Diameter x Usable Length 5 2490 ⁄8” x 43⁄8”
Description For Rapid Hitch ball platform
561.863.2220 | 800.330.1800
⁄8” x 31⁄2”
Description Trimax for Class III and IV hitches with 2” square tubes
561.863.2250 | 888.330.1888
order@expediter.com
LOCKS & CARGO CONTROL
Ball Mount/Receiver Hitch Locks - Bent Pin Style Pin Diameter x Usable Length
½” x 3”
Description For Class I and Class II hitches with 1¼” square tubes 2570
2571
Pin Diameter x Usable Length
⁄8” x 35⁄8”
5
Brake Assemblies
Part #
Description For Class III, IV and V hitches with 2” and 2½” square tubes. Includes plastic lock cover.
Tires & Wheels
Description Fits Class II, III & IV hitches with 11⁄4” and 2” square tubes.
Suspensions & Fasteners
2571
Part # Pin Diameter x Usable Length 1 2866DAT ⁄2” & 5⁄8” x 3”
Hubs & Axles
Part # 2570
Information
K
2866DAT
MAG200
Pin Diameter x Usable Length
⁄8” x 2 ⁄4”
5
3
MAG200
Description J-pin lock. Fits Class III and IV with 2” square tubes and additional 17⁄32” hole in receiver tube 63201
Trailer Parts
Keyed Alike Lock Sets Part # 2573
Pin Diameter x Usable Length
¼” x 7⁄8” & 5⁄8 “ x 211⁄16”
Description For Class III and IV hitches with 2” square tubes
Locks & Cargo Control
Description Includes coupler latch and receiver hitch locks, keyed alike.
LL105
¼” x 11⁄16” & 5⁄8” x 2½”
561.863.2220 | 800.330.1800
Description Stainless steel; Lifetime warranty; Includes coupler latch and receiver hitch locks, keyed alike.
561.863.2250 | 888.330.1888
LL105
order@expediter.com
Switches
Pin Diameter x Usable Length
Brake Actuating Systems
1481DAT
Part #
Lights & Electrical
2573
Part # Pin Diameter x Usable Length 9 1481DAT ⁄32” & 5⁄8”
Body Components
63201
⁄8” x 31⁄4”
5
Description Combination lock (no keys required), Fits Class III and IV hitches with 2” square tubes. Resettable combination. Rubber cover protects lock mechanism.
Hitches & Towing Accessories
Part #
Pin Diameter x Usable Length
Couplers Jacks & Winches
Part #
K7
Information
K
LOCKS & CARGO CONTROL
Keyed Alike Lock Sets (Continued)
Hubs & Axles
OR Part # 2491
Hitches & Towing Accessories
For Rapid Hitch ball platform and 2½” square receiver hitch
Description Lock Sets contains one each: • #379DAT Coupler Lock - For use when not trailer is not hooked up. • #2866DAT Trailer Hitch Lock fits both 1¼” x 1¼” and 2” x 2” trailer hitches. • #2847DAT Trailer Stainless Steel Coupler Latch Lock - For use when trailer is in tow. • Heavy duty nylon zippered carrying case
3794DAT
Couplers Jacks & Winches
Tires & Wheels
3794DAT
Lunette Eye/Draw Bar Locks Part # 2572
Description Fits 2½” and 3” ID lunette eyes. Requires standard ½” padlock (NOT Included). Zinc plated
2572
Body Components Trailer Parts Lights & Electrical
⁄8” x 3¼” & 5⁄8” x 43⁄8”
5
Part #
Part # TRL51
Description Fits 2½” and 3” ID lunette eyes. Built in Lock
Part #
Description Fits 2½” and 3” ID lunette eyes. Requires padlock (NOT Included). Aluminum construction with ¾” steel pin. Made in the USA. (Order #40DAT lock separately)
TRL51
TL60 TL60
Locks & Cargo Control Brake Actuating Systems Switches
K8
Description For Rapid Hitch ball platform and 2” square receiver hitch
5
3492
Suspensions & Fasteners
Brake Assemblies
3492
⁄8” x 2¾” & 5⁄8” x 43⁄8”
Pin Diameter x Usable Length
King Pin Locks Part # 6007
Description 2” standard king pins; Built-in lock cylinder
Part #
Description Requires padlock (NOT Included). Aluminum construction with ¾” steel pin. Made in the USA. (Order #40DAT lock separately)
6007
TL70 TL70
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
order@expediter.com
LOCKS & CARGO CONTROL
Information
Gooseneck Coupler Locks
K
Hubs & Axles
Description
TL50
Precision-made of aircraft aluminum and will not rust. It features a ¾” heavy-duty steel locking pin. Fits Hammerblow, Stallion, Superior and T.E.M Gooseneck style couplers. (Padlock not included. Order lock #40DAT separately.)
TL55
Fits RAM Gooseneck style couplers. (Padlock not included. Order lock #40DAT separately)
Brake Assemblies
Part #
TL50 Suspensions & Fasteners
TL51
TL51
TL57
Description Delux Gooseneck Combo. #TL-53 consists of #TL-50, #TL-51 and two #40KADPF large padlocks in one convenient package.
Body Components
TL53
Hitches & Towing Accessories
Part #
Deluxe Gooseneck Combo. #TL-57 consists of #TL-55, #TL-51 and two #40KADAT large padlocks in one package.
Description
2504
Heavy 7⁄16” u-bolt secures tire on tongue or frame up to 3” wide. Holds 4 or 5 lug wheels. Will fit 8” thru 14” and most 15” wheels. Adjustable threaded brackets will hold padlock for security. Overall length 8¾”. Thread length 3”. Zinc plated. Display packaged. 2504
262DAT
Solid zinc and steel construction; Chrome plated for corrosion resistance Locks over wheel studs up to 9⁄16” (14mm) diameter; For use only on non-operating spare tire
Brake Actuating Systems
Description
561.863.2250 | 888.330.1888
order@expediter.com
Switches
262DAT
561.863.2220 | 800.330.1800
Locks & Cargo Control
Part #
Lights & Electrical
Spare Tire Locks
Trailer Parts
TL53
Part #
Couplers Jacks & Winches
Description For use with Model TL-50. Secures the adjustable top part of coupler by covering bolt. Fits all gooseneck style round or square tube designs. (Padlock not included. Order lock #40DAT separately.)
Tires & Wheels
Part #
K9
LOCKS & CARGO CONTROL
Trailer Wheel Locks
Hubs & Axles
Information
K
TWL100
Description
TWL100
The TWL100 Trimax Wheel Lock brings provides maximum security for trailers, cars, trucks, boats, construction equipment, ATVs and 4X4s. • Fits nearly all 10” to 18” wheels • Extremely visible deterrent • Easy installation. Includes all tools and complete instructions • Heavy gauge steel disc covers lug nuts to prevent tire removal • Clamps tight to tire for added security • Rugged epoxy powder coat finish prevents rust
TWL400
Heavy Duty Trimax Wheel Lock. 10” - 18” Wheel. • Longer reach • Additional padlock for more security
TWL100
TWL400
Part #
Description
TCL65
Wheel Chock & Lock 10.5” open
TCL75
Wheel Chock & Lock 11.25” open
TCL65
Lights & Electrical
Trailer Parts
Body Components
Hitches & Towing Accessories
Couplers Jacks & Winches
Tires & Wheels
Suspensions & Fasteners
Brake Assemblies
Part #
Description
Locks & Cargo Control
• Easy to use - installs and removes in just seconds • Lock is recessed into handle for greater security Part #
Description
EZ-300
• Fits most 15” 205, 215, F78, H78 tires • Will fit some 13” and 14” wheels • Fits most tires up to 9¼” wide • Opens to 93⁄8” wide
EZ302
• Fits most 15” to 20” wheels • Will fit some 13” and 14” wheels • Fits most tires up to 10¾” wide • Opens to 107⁄8” wide
Brake Actuating Systems Switches
K 10
• Includes ½-20 locking lug nuts for added security • Heavy-duty plastic covers to protect rims
EZ302
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
order@expediter.com
Hidden Shackle Locks Description Puck style. 27⁄8” wide hardened steel body Protected shackle prevents prying, cutting and sawing
Keyed Alike
Solid Steel Hasp for use with puck style locks; 9” (23cm)W x 4½” (11cm)H
DL-80
Heavy-duty aircraft aluminum - will not rust. Convenient push-button lock. Hardened plated steel pin. Perimeter gasket to eliminate scratching and vibration noise. Covers the keeper hole used with regular padlocks. Covers the bolt head at the top and bottom for added security. Can be used vertical or horizontal. Pull ring for easy pin removal.
DL-80KA
Blaylock Cargo Door Lock. Keyed alike.
40DAT 40KADPF
Description 2¾” (70mm) wide stainless steel body resists corrosion Hardened steel shackle for extra cut resistance Double deadbolt locking to guard against pulling Key retaining feature ensures padlock is not left unlocked Fully shielded shackle protects against bolt cutter attacks 40KADPF
37KA
Description Amored hardened steel shackle defies cutting 19⁄16” (40mm) laminated steel body for superior strength 4-pin tumbler cylinder helps prevent picking Shackle guard protects against bolt cutters and hacksaws
Body Components
Part #
Cable Locks
8119DPF
VMAX6 Part #
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
614DAT
order@expediter.com
Switches
614DAT
Description 6’ (1.8mm), ¼” (6mm) diameter, steel cable No.141 covered brass 19⁄16” (40mm) lock for corrosion resistance 6’ cable length will accommodate most tires & general applications
Brake Actuating Systems
Description 6 Foot 3⁄8” diameter cable. Adjustable length. Keyed Lock Mechanism.
Locks & Cargo Control
Part # VMAX6
Lights & Electrical
8119DPF
Description 5’ (1.5m), 3⁄8” (10mm) diameter cable Flexible braided steel cables for strong cut resistance Combination locking mechanisms for keyless convenience Set-your-own combination for convenience and security Protective coating helps prevent scratching and rusting
Trailer Parts
37KA Part #
Hitches & Towing Accessories
Keyed Alike
DL-80
Couplers Jacks & Winches
Part #
SLH100
Tires & Wheels
Shielded Padlock
THP3XL
Suspensions & Fasteners
Puck Style 3 Pack. Keyed alike.
SLH100
970DPF
Brake Assemblies
THP3XL
Hubs & Axles
Part # 970DPF 6271KA
Information
K
LOCKS & CARGO CONTROL
K 11
Information Hubs & Axles
LOCKS & CARGO CONTROL
Tires & Wheels Couplers Jacks & Winches Hitches & Towing Accessories Body Components Trailer Parts Lights & Electrical Locks & Cargo Control Brake Actuating Systems Switches
K 12
Anchor Shackle
WLL (Working Load Limit):
Clevis Slip Hook
Grab Hook
Safety Snap Hook
Working Load Limit is the maximum load (in pounds) which should ever be applied to any assembly, when the assembly is new and the load is uniformly applied in direct tension to a straight, untwisted assembly. MBS (Minimum Breaking Strength): Minimum Breaking Strength is the minimum force required to cause the chain, accessory, or assembly to fail or become distorted and no longer usable. This figure should be used to determine the breaking strength of an item.
Suspensions & Fasteners
Brake Assemblies
K
Quick Link
Snap Hook
S-Hook
Anchor Shackle Chain Size ⁄16” ¼” 5 ⁄16” 3 ⁄8” 7 ⁄16” ½”
3
Pin Diameter ¼” 5 ⁄16” 3 ⁄8” 7 ⁄16” ½” 5 ⁄8”
(Zinc Plated)
WLL 667 lbs 1,000 lbs 1,500 lbs 2,000 lbs 3,000 lbs 4,000 lbs
Drop forged 1045 steel. Hot galvanized and load rated. For joining welded chain attachments. Meets Federal Specs. #RR-C-271B, Type 4, Class 1. Pin=4130 Alloy
Part # 2849
Trade Size ⁄16”
Material Dia. .195” (5mm)
2850
660 lbs
¼”
.235” (6mm)
880 lbs
2851
5
⁄16”
.313” (8mm)
1,540 lbs
2852
3
⁄8”
.350” (9mm)
2,200 lbs
2854
½”
.475” (12mm)
3,300 lbs
3
Snap Hook
System 4 High Test (Zinc Plated)
Chain Size ¼” 5 ⁄16” 3 ⁄8” ½” 5 ⁄8”
Pin Diameter .38” .44” .47” .63” .73”
WLL 1,950 lbs 2,875 lbs 4,000 lbs 6,500 lbs 8,000 lbs
Drop forged carbon steel hook, heat treated. For use with System 3 Proof Coil or System 4 High Test. Slip hooks have a lower Working Load Limit than the same type/size chain or grab hook.
Clevis Slip Hook w/ No Snap (Zinc Plated)
Part # 2874 2875 2876 2877
Chain Size ¼” 5 ⁄16” 3 ⁄8” ½”
Pin Diameter .38” .44” .47” .63”
System 7 Transport Grade (Zinc Plated) Chain Size ¼” 5 ⁄16” 3 ⁄8” ½”
Pin Diameter .38” .44” .47” .63”
Drop forged, carbon steel hook, heat treated. Use w/System 3 Proof Coil or System 4 High Test.
561.863.2220 | 800.330.1800
(Zinc Plated)
Part # 2879 2880 2881 2882 2883 2884
Chain Size
WLL 105 lbs 395 lbs 507 lbs 771 lbs 905 lbs 28,300 lbs
Fast, easy connection for permanent or temporary attachment. Use with low carbon chain only.
Safety Snap Hook Part # 2841
Eye ID
Finish Zinc
⁄16”
11
WLL 4,000 lbs
S-Hook
(Zinc Plated) Part # 2847 2848 2855
Chain Size ⁄8” 7 ⁄16” 17 ⁄32” 3
Pin Diameter I II III
WLL 750 lbs 1,250 lbs 1,900 lbs
Heated treated, medium carbon steel. Designed to keep trailer connected to vehicle if hitch fails or comes uncoupled.
S-Hook w/Safety Latch
WLL 3,600 lbs 5,400 lbs 7,500 lbs 11,300 lbs
Pin Diameter .195” (5mm) .225” (6mm) .305” (8mm) .345” (9mm) .465” (12mm) .500 (13mm)
⁄16” ¼” 5 ⁄16” 3 ⁄8” ½” 9 ⁄16” 3
WLL 1,950 lbs 2,875 lbs 4,000 lbs 6,500 lbs
Grab Hook
Part # 2843 2844 2845 2846
WLL
Fast, easy connection for permanent or temporary attachment. Use with low carbon chain only.
Clevis Slip Hook w/ Safety Latch Part # 2866 2867 2868 2869 2870
Clevis Slip Hook w/ No Snap
Quick Link
(Galvanized)
Part # 2860 2861 2862 2863 2864 2865
S-Hook w/ Safety Latch
Part # 2837 2838 2839
Size ⁄8” 7 ⁄16” 17 ⁄32” 3
Class I II III
WLL 750 lbs 1,250 lbs 1,900 lbs
Heated treated, medium carbon steel. Designed to keep trailer connected to vehicle if hitch fails or comes uncoupled.
561.863.2250 | 888.330.1888
order@expediter.com
LOCKS & CARGO CONTROL
Fig 1. Safety Chain Specifications
Minimum Longitudinal Load, Tension, Pounds (See Fig 2 & 3) Trailer Classification
2,000 3,500 5,000 ** MGTW
Each of two Chain Attaching Means
Approximate Diameter of Steel in Link
2,000 3,500 5,000 MGTW
⁄16” ⁄4” ⁄16” 3 ⁄8” to 7⁄16” 3
1
5
Connecting Methods: Review the illustrations below , “fig 2. Typical Single Safety Chain Installation,” and “fig 3. Typical Double Safety Chain Installation”. Both the single and double chains must be crossed under the tongue. They must be oriented in such a manner as to prevent the tongue from dropping to the ground in the event of failure to the hitch, coupler or ball. The chains must be connected to the towing vehicle as that the slack for each length of chain, between the trailer and the towing vehicle, is the same and must have no more slack when in use than is necessary to permit proper turning of the vehicles. The forward end of the chain must be attached to the towing vehicle, not to the ball but to the hitch or other frame member. The chain must be looped around the member and hooked back into itself. fig 2. Typical Single Safety Chain Installation fig 3. Typical Double Safety Chain Installation
Suspensions & Fasteners
NOTE: Load shown shall be applied in the same manner as would prevail if the trailer were being towed by the safety chain in a straight ahead direction. Safety chain, when formed, fastened or rigged as on the vehicles, shall withstand load shown without breaking. Local marking, denting or gouging of the chain attaching means at the points of safety chain contact shall not be considered excessive distortion. The intent is that the chain attaching means shall have sufficient strength to break the safety chain consistently.
Brake Assemblies
Class 1 Class 2 Class 3 Class 4
Each Safety
including those which attach to the towing vehicle, must be equal to the maximum Gross Trailer Weight. No welding, torching, or machining operation shall be performed on the chain by the installer or the operator to attach it to the trailer.
Hubs & Axles
“Safety Chains” are the flexible tension members connected from the front portion of the towed vehicle to the rear portion of the towing vehicle. Their purpose is to retain connection between towed and towing vehicle in the event of failure of the ball, socket, coupler, or hitch. Specification: See Fig 1.
Information
Definition:
K
** MGTW means the Maximum Gross Trailer Weight... pounds to be towed.
Attaching Means:
Tires & Wheels
Safety chains must be connected to the front of the trailer or tongue, not to the coupler, by bolts or other devices. The minimum strength of these devices,
Chain - Proof Coil Grade 30 (Bulk Chain is ordered per foot)
Description ⁄16” Zinc Plated Grade 30 Proof Coil Chain ¼” Zinc Plated Grade 30 Proof Coil Chain 5 ⁄16” Zinc Plated Grade 30 Proof Coil Chain 3 ⁄8” Zinc Plated Grade 30 Proof Coil Chain
WLL
13035
Chain Size x Length
S-Hook w/Safety Latch
Part # 43239
Capacity 15K
Chain Size x Length
Forged Slip Hook
⁄8” x 35”
1
⁄16” x 48” 3 ⁄16” x 54” ¼” x 27” ¼” x 48” ¼” x 54” 5 ⁄16” x 54”
2 2 1- one 2 2 2
3
3
43233
43256
Trailer Parts
Class Rating I I II II II III
43239
Steel Rod Chain Anchor - Secure Safety Chains to Trailer Frames SC38B SC50B
Safety Cable Assemblies Sold in Pairs (Vinyl Coated)
561.863.2220 | 800.330.1800
Chain Size x Length
S-Hook w/Safety Latch
24” 36” 36” 40” 36” 36”
⁄8” 3 ⁄8” 7 ⁄16” 7 ⁄16” ½” ½”
SC58B
3
561.863.2250 | 888.330.1888
43241
2829DATSC
order@expediter.com
Switches
Class Rating I II III III IV V
Brake Actuating Systems
Part # 43240 43241 43243 2829DATSC 43246 43247
Locks & Cargo Control
Description Safety Chain Mounting Bracket - 3⁄8” x 4” Safety Chain Mounting Bracket - ½” x 6” Safety Chain Mounting Bracket - 5⁄8” x 8¼”
Lights & Electrical
Safety Chain Anchor
Part # SC38B SC50B SC58B
Body Components
Part # 43233 43234 43256 43235 43254 43237
Hitches & Towing Accessories
750 lbs 1,250 lbs 1,900 lbs 2,650 lbs
3
Couplers Jacks & Winches
Part # 13035 13036 13037 13038
K 13
Information
K
LOCKS & CARGO CONTROL
WLL: Working Load Limit is the maximum load (in pounds) which should ever be applied to any assembly, when the assembly is new and the load is uniformly applied in direct tension to a straight, untwisted assembly.
Lever Binders
Part # 3676
Description Lever Chain Binder
Part # 3678 3679
Description Ratchet Chain Binder Ratchet Chain Binder
Hitches & Towing Accessories
Couplers Jacks & Winches
5,400 lbs
Chain Size
WLL
⁄16” - 3⁄8” 3 ⁄8” - ½”
5,400 lbs 9,200 lbs
5
3678
Load Binder Chain Assemblies
Body Components Trailer Parts Lights & Electrical Locks & Cargo Control Brake Actuating Systems
WLL
⁄16” - 3⁄8”
5
Ratchet Binders
Part # 43253 43252
Made from high carbon steel to provide greater tensile strength Description Grade 43 High Test Grade 70 Transport Chain
Chain Size
WLL
⁄8” x 20’ 3 ⁄8” - 20’
5,400 lbs 6,600 lbs
3
43253
Tie-Down Assembly Usage Chart: This chart is provided as a guide to meet the basic minimum current in service requirements of the FMCSA† and the DOT‡ published Sept 27, 2002. The following table lists the minimum number of chain assemblies required to secure a load per DOT &CVSA§. This chart is only to be used as a reference. NOTE: Many factors affect proper method of cargo securement including the cargo to be secured and the length of the cargo. Refer to the most recent revision of The Department of Transportation (DOT) Title 49 regulations for more complete requirements regarding the proper methods and number of tiedowns required. †FMCSA: Federal Motor Carrier Safety Admin
Chain Grade
Switches
561.863.2220 | 800.330.1800
Size
⁄ ⁄
Alloy S8 - G80
5 16
Transport S7 - G70
5 16
38
Net Weight of Cargo to be Secured in lbs: 20,000 25,000 30,000 35,000 40,000 45,000 50,000 Due to elongation characteristics, S-8 Alloy chain is not recommend for Transport tie-down or cargo securement.
⁄ ⁄ 3⁄8 1⁄2
4 3 2 1
4 3 2 2
5 4 3 2
6 4 3 2
7 5 4 2
8 5 4 2
8 6 4 3
⁄ ⁄ 3⁄8
4 3 2
5 4 4
6 4 3
7 5 4
8 6 4
9 6 5
19 7 5
14
14
High Test S4 - G43
5 16
Proof Coil S3 - G30
5 16
‡DOT: Department of Transportation §CVSA: The Commercial Vehicle Safety Alliance
K 14
Chain Size
3676
Tires & Wheels
Suspensions & Fasteners
Brake Assemblies
Hubs & Axles
All safety ratio ratings WLL are the maximum safe load which the assembly should be subject to at any time.
⁄ ⁄ 3⁄8 14
Due to low working load limits, S-3 Proof Coil is not recommend for Transport tie-down or cargo securement.
561.863.2250 | 888.330.1888
order@expediter.com
LOCKS & CARGO CONTROL
3
Part #
Description
6003
Recessed Floor Ring; 5,000 lbs Break Strength WLL: 2,000 lbs
DIA.
MOUNTING SURFACE
Hubs & Axles
DIA.
3¼ 4¼
6003-K
Recessed Ring with #801BP Packing Plate & Mounting Hardware
6½ 3¼
Description
801BP
Back Support Plate for #6003
4
Suspensions & Fasteners
Part #
6½ 3¼
Ø3½ 3
Ø.38
¼ DIA. C SUNK
2
Couplers Jacks & Winches
6004
Description Recessed Floor Ring Requires 3” Dia. Ring 850 lbs Break Strength, 285 lbs WLL
Tires & Wheels
801PB
Part #
Brake Assemblies
6003
4½
6003-K
Information
Pan Fittings w/Rings
K
4 5 ¼ DIA.
1.94
6018
Description Surface Mounted or Recessed Recessed Rope Ring with Plastic Bezel 1,500 lbs Break Strength, 500 lbs WLL
.36 Ø.28
Body Components
Part #
6004
1.156 1.52
6018
4
Part #
2.33
6016
Brake Actuating Systems
DIA.
Flush Mount Part # 6017
1
1
¼ DIA. RING DIA.
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
6017
order@expediter.com
Switches
Description Zinc Finish Standard Steel/Plastic Construction
Locks & Cargo Control
6016
3
2½
Description Surface Mounted Pan with ¼” Dia. Ring. 800 lbs Break Strength, 265 lbs WLL Zinc Plated.
Lights & Electrical
3½
Trailer Parts
Ø.25 Ø3.52 R.63
Surface Mounted Rope Ring
Hitches & Towing Accessories
3½
K 15
LOCKS & CARGO CONTROL
Bolt-On D-Ring Assemblies
Hubs & Axles
Information
K
1
w/ Attachment Clips
2
Part #
DIA. 2X ¼ DIA.
6006
Description ¼” Welded D-Ring w/Bolt-on Clip 1,200 lbs Break Strength
6006
WLL 400 lbs
1½
Suspensions & Fasteners
Brake Assemblies
1
Forged D-Ring Assemblies w/ Bolt-on Clip / Weld-on Clips
3½
Tires & Wheels
2½
Part #
Description Forged ½” D-Ring Assembly w/ Bolt-on/Weld-on Clip 1 ⁄2” x 23⁄8” x 21⁄2” ID 12,000 lbs Break Strength
6009
2 3
WLL 4,000 lbs
Couplers Jacks & Winches
6009
w/ Weld-on Clips
3
5
3
6001
6
Part #
6,300 lbs 9,120 lbs
Forged 1” D-Ring w/ Weld-on Clip 1” x 3” x 3 ID, 46,760 lbs break strength
15,586 lbs
Description 1” D-Ring Assembly w/Weld-on Clip (Long) 1” 3” x 4 ID, 47,000 lbs Break Strength
WLL 15,600 lbs
3
6002
5
⁄2”
Brake Actuating Systems
1
31⁄8”
Part # 7115 7113 9115
Switches
WLL
Forged 3⁄4” D-Ring w/ Weld-on Clip ⁄4” x 3” x 3 ID, 26,500 lbs break strength
3
6002
Locks & Cargo Control
Lights & Electrical
6001
6024
5
4
K 16
Description ⁄8” D-Ring Assembly w/Weld-on Clip 5 ⁄8” x 3” x 3 ID, 19,000 lbs Break Strength 5
6023
Trailer Parts
Body Components
Hitches & Towing Accessories
Part #
7115
7113
Description ⁄8” x 1 ⁄8” x 3 ⁄8” Tiedown Weld-on Round
WLL -
⁄8” x 15⁄8” x 4½” Tiedown/Handle Weld-on Square
-
3
7
1
3
⁄2” x 1 ⁄8” x 3 ⁄8” Tiedown Weld-on Round
1
7
1
17⁄8” 9115
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
order@expediter.com
LOCKS & CARGO CONTROL
Grab Hook
System 7 Transport Grade (Zinc Plated) End Fittings
Length
Capacity
42487
Ratchet
E Clips
12’
1,500 lbs
42488
Ratchet
E Clips
16’
1,500 lbs
42501
Ratchet
E Clips
20’
1,500 lbs
42502
Over Center Cam
E Clips
12’
1,500 lbs
42487
42488
Brake Assemblies
Binder
WLL 6,000 lbs
Tires & Wheels
Description Rope Tie Off w/Springloaded E-Clip -10”
Suspensions & Fasteners
42502
42501
Part # 42474
Hubs & Axles
Part #
Couplers Jacks & Winches
42474
Logistic Track Fittings Description E-Track Clip w/2” D-Ring
MBS 4,000 lbs
WLL 1,500 lbs
Hitches & Towing Accessories
Part # 42499
42499
Description E-Track Clip w/Ring
MBS 6,000 lbs
Body Components
Part # 42500
WLL 2,000 lbs
Trailer Parts
42500
Series E or A Decking/Shoring Beam 42490
Description Wood Beam Socket (The rate capacity varies depending on lumber quality)
Lights & Electrical
Part #
2.00 (51)
1.00 (25)
42489
Description 10 ft. Section of E-Track - Horizontal Mount 12- Gauge - Coated Steel
Brake Actuating Systems
Series E Track
4.95 (126)
0.42 (11)
0.28 (7)
561.863.2250 | 888.330.1888
order@expediter.com
Switches
42489
561.863.2220 | 800.330.1800
Locks & Cargo Control
42490
Part #
Information
K
K 17
LOCKS & CARGO CONTROL
Weld-On Webbing Winches
Hubs & Axles
Information
K
3634
Part # 3634
Short - Side Mount Weld-on
3630
Standard - Under Mount Weld-on / Slider
3632
Deep - Storable Under Mount Weld-on / Slider
Brake Assemblies
Weld-On Winches are designed to be permanently mounted to the trailer frame in a fixed position.
Suspensions & Fasteners
Slider Winches can be located anywhere along the length of the slide track and will lock into position when tension is applied to the strap assembly. 3630
3632
Portable Webbing Winches
Couplers Jacks & Winches
Tires & Wheels
Part # Description Standard Under Mount Portable with 2 Set Screws 3642 Portable Webbing Winches provide a great deal of flexibility during application because they can be located anywhere along the outer rail channel, as long as they do not interfere with any other trailer components when the trailer is loaded or unloaded.
Hitches & Towing Accessories
3642
Body Components
Part # 3641
Trailer Parts Lights & Electrical Locks & Cargo Control
Lashing Webbing Winch Description 2” Lashing - Right Hand
WLL 3,335 lbs
3641
Flat Hook
3638
D-Ring
Delta Ring
Part # 3636 3637 3639 3686 3638 3640 3685
Snap Hook
Standard Winch Straps
Description 2” x 15’ with Snap Hook 2” x 27’ with Flat Hook 3” x 24’ with D-Ring 3” x 27’ with Flat Hook 4” x 27’, 20m Webbing, Flat Hook 4” x 30’, 20m Webbing, Flat Hook 4” x 27’ with Delta Ring
Ratchet Capacity 15,000 lbs 15,000 lbs 15,000 lbs 15,000 lbs 15,000 lbs 15,000 lbs 15,000 lbs
Winch Bar & Slider Track Part # 3645
Brake Actuating Systems Switches
K 18
Description
Description Chrome Knurled Combination Winch Bar
Winch Bars feature knurling for both hands creating a slip resistant handle for safety. The winch bar tip shall be inserted through both holes in the winches end cap. 3645
1903040
561.863.2220 | 800.330.1800
Standard Winch Bars should never be used for tightening Chain Binders. 1903040
Slider Winch Track - ¼” formed steel; 72” length
561.863.2250 | 888.330.1888
order@expediter.com
LOCKS & CARGO CONTROL
Hubs & Axles
Ratchet Tie Down 42496 42498
1” wide strap with vinyl coated double “J” hooks adjustable from 4’ to 15’ and has a painted ratchet & cadmium plated gears. 1,500 lbs.
42480
1” nylon strap with rubber coated hooks & ratchet. 1,500 lbs load capacity. 15’ long. 4 pack in retail clamshell.
42496
Suspensions & Fasteners
Description 1” strap features nylon web, rubber coated 3⁄8” metal hooks. A ratchet buckle for the ultimate in tightness. 15’ Long.
Brake Assemblies
Part #
Tires & Wheels
42498
Couplers Jacks & Winches
Heavy-Duty Cam Buckle Straps Description
Capacity
42477
1” Strap, 5.5’ Long; 1” Vinyl Coated S-Hook; 1 Pair
400 lbs
42479
1” Strap, 15’ Long; 1” Vinyl Coated S-Hook
400 lbs
Hitches & Towing Accessories
Part #
Trailer Parts
E-Track Ratchet Straps Description
Capacity
42487
2” Wide, 12’ Length; E-Clip (End Fittings); Yellow
1,500 lbs
42488
2” Wide, 16’ Length; E-Clip (End Fittings); Grey
1,500 lbs
42501
2” Wide, 20’ Length; E-Clip (End Fittings); Blue
1,500 lbs
Lights & Electrical
Part #
Wheel Tiedowns
(Ratchet Sold Separately) Fits 13” and 14” Standard Tire and Wheel Tiedown.1 Pair
3651-15
Fits 15” and 16” Standard Tire and Wheel Tiedown.1 Pair
3651
Adjustable. Fits 13-15” Standard Tire and Wheel Tiedown. 1 Pair
3651-R
Ratchet only for Wheel Tiedowns. Sold Individually 3651
561.863.2250 | 888.330.1888
order@expediter.com
Switches
3651-13
Brake Actuating Systems
Description
Locks & Cargo Control
42488
Part #
Body Components
42477
561.863.2220 | 800.330.1800
Information
K
K 19
LOCKS & CARGO CONTROL
Long Handle Ratchet Strap Assemblies
Part # 3682
3655
Couplers Jacks & Winches Hitches & Towing Accessories Body Components
Extra Long Wide Handle Ratchet Strap Assemblies
Part # 3657 3659 3655 3636 3689 3637
Description Ratchet Capacity 10,000 lbs 2” x 15’, Snap Hook 10,000 lbs 2” x 15’, Flat Hook 10,000 lbs 2” x 27’, Flat Hook 2” x 15’, Snap Hook - Replacement Strap Only - NO Ratchet 2” x 15’, Flat Hook - Replacement Strap Only - NO Ratchet 2” x 27’, Flat Hook - Replacement Strap Only - NO Ratchet
Part # 3683 3688
Description Ratchet Capacity 10,000 lbs 2” x 27’; Double “J” wire hooks 2” x 27’; Double “J” replacement strap only - No Ratchet
Trailer Parts
3683
Lights & Electrical Locks & Cargo Control
Ratchet Capacity 15,000 lbs
3637
Ratchet Buckles
Part # 3651-R
Description 2” Standard Handle Ratchet; 11,000 lbs. Break Strength
Part # 3652
Description 2” Extra Long Wide Handle Ratchet; 11,000 lbs. Break Strength
3651-R
Brake Actuating Systems Switches
K 20
Description 4” x 27’, Flat Hook
3682
Tires & Wheels
Suspensions & Fasteners
Brake Assemblies
Hubs & Axles
Information
K
3652
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
order@expediter.com
LOCKS & CARGO CONTROL
Description Locking latch kit for trailer and RV doors. Secondary dead bolt. 4 keys included. Black. 3.47” x 4.28”. Fits doors 11⁄4” to 11⁄2” thick.
Hubs & Axles
8033
Cargo / RV Door Latch
Brake Assemblies
8033
8017
Size Description 3” High, Weld-on 15⁄8 x 3½” Pre-punched to attach with 3⁄8” bolts. Hot Dipped Galvanized. 11 guage
Suspensions & Fasteners
Stake Pockets Part # 8015
Information
Part #
K
8015
Tires & Wheels
8017
Hole Size
Lockable
Mounting Holes
Finish
8035
33⁄8” x 45⁄8”
Yes
No
Rustproof Steel
8036
33⁄8” x 45⁄8”
No
No
Rustproof Steel
8038
2¾” x 3¾”
Yes
No
Rustproof Steel
8037
2¾” x 3¾”
Yes
Yes
Stainless Steel
19CH545
Lock 19 Cylinder & CH545 Key. Straight Tab
DH304
8034
19CH545
Heavy-Duty Aluminum Door Holdback
Description Heavy-duty, die cast aluminum construction; 4” hook length; Keeper features spring-loaded latch mechanism
Lights & Electrical
Part #
8037
Rack Connector Set 8031
8031 (right)
8032 (left)
8032 (right)
Corner Stake
Description 33⁄8” overall length to inside of angle with 11⁄32” holes formed from 2½” x 3⁄16” stock One set consists of 4 pieces: (1) L.H. pair and (1) R.H. pair
561.863.2220 | 800.330.1800
561.863.2250 | 888.330.1888
order@expediter.com
Switches
8032
8031 (left)
Brake Actuating Systems
Part #
Description 7” overall length, 11⁄32” holes, formed from 2½” x 3⁄16” stock One set consists of 4 pieces: (1) L.H. pair and (1) R.H. pair
Locks & Cargo Control
DH304
Straight Stake
Part #
Trailer Parts
Description Replacement Cylinder and Key for #8035 Latch
8038
Body Components
Part # 8034
Hitches & Towing Accessories
Part #
Couplers Jacks & Winches
Slam Locks
K 21
LOCKS & CARGO CONTROL
Part #
Hubs & Axles
Information
K
L2595
Spring Latches
Description
Note • Spring loaded bolt can be locked in the open position. ½” pin extends 1” past bracket • Turning lever allows the bolt to close 1½” x 1¼” mounting pattern for ¼” bolts under spring pressure. • Zinc plated bolt, housing and keeper.
Brake Assemblies
L2595
Suspensions & Fasteners
Part # 43027
Description For boat, snowmobile, or utility trailers that tilt. Holds tilt bed securely while towing. Zinc plated handle, spring, and latchfor maximum corrosion resistance. Unassembled. • ¼” 4-way Plunger • Weld-on • Reverse Handle
Couplers Jacks & Winches
Tires & Wheels
43027
43010-1
43010-6
43010-2
Door Latch Kit
43010 Part #
Description
43010
Zinc Plated Cam Action Door Latch Kit (¾” pipe NOT included)
43010-1
Hasp Only. 1” wide. 41⁄4”mounting centers. Round holes
Body Components
43010-5
Hasp Only. 1” wide. 41⁄4”mounting centers. Square holes
43010-6
Hasp Only. 2” wide. 4”mounting centers. 1 round hole. 1 square hole
43010-2
Weld-on Handle Only. 133⁄4” overall length
Trailer Parts
Hitches & Towing Accessories
43010-5
43011
Complete Bar Lock with Hasp 36” overall length. Zinc Plated. Mounting hardware NOT included.
43011
43031
43030
Brake Actuating Systems
Locks & Cargo Control
Lights & Electrical
Door Handles Part #
Description
43030
“L” type door handle; Chrome plated handles rotate full 360° Can be locked in 4 positions spaced 90° apart Shaft is standard 5⁄16” square C-C of mounting hole 1½”
43031
“T” Type door handle; Outside surface mount; Chrome plated Full 360° rotation; 5⁄16” square shaft 1½” center to center mounting holes Can be locked in 4 positions spaced 90° apart
NOTE: Door Handle Cam Must Be Ordered Separately
Switches
Part #
K 22
43032 43032
561.863.2220 | 800.330.1800
Door Handle Cam
Description 2” Door handle cam; Zinc plated steel with set screw to secure to 5⁄16” shaft. For use with #43030 and 43031
561.863.2250 | 888.330.1888
order@expediter.com