A ROUGH GUIDE TO ADAP

This is the latest up-date of our “Rough Guide to Adaptions”. Due to the limitations of the available space in the the Open House magazine we can not go into minute detail of each and every option, but hopefully this article will give a fairly good overview of the most commonly available options for the adaption of most motorcycles and trikes to suit the needs of riders with disabilities. Where possible we have included the web-site addresses or other contact details of manufacturers. More comprehensive details are available on www.nabd.org.uk or from the NABD office: office@thenabd.co.uk

Left Leg: (Amputation, reduced / restricted strength / mobility in the knee or the ankle joints):

The easiest method would be to use an electrongic gear change system such as the Kliktronic push button gear-changer www.kliktronic.co.uk. This unit works by pushing two buttons on the handlebars that operate an electronic actuator connected to the gear pedal. The Kliktronic gear-changer is supplied as a complete, easy to fit kit, which can be used on all styles of motorcycle.

Another method is to use a cross over linkage to the right side of the motorcycle, mounting the gear pedal either beside or in-front of the rear brake pedal.

Right Leg: (Amputation, reduced/restricted strength/mobility in the knee or the ankle joints):

1. Electronic push button gear-changer (to fit 1” and 7/8” bars) (“on-bar” or “under-bar” push-buttons)

2. “Crossover” to the right side of the motorcycle

This is usually a simple matter of transferring the rear brake pedal to a handlebar-mounted lever. This can take the form of a thumb operated lever or “twin” levers. Another method of adapting the rear brake system is to utilise a mechanical linkage or hydraulic extension to transfer the brake pedal to the left-hand side of the machine. This can be sited either beside the gear pedal or directly behind it for heel operation.

1. Twin levers

2. Thumb brake

3. Crossover to the left side of the motorcycle. For any type of leg disability you may find it difficult to operate the side stand. This can usually be cured with the simple addition of a hand operated actuating lever or moving the stand to the right side of the machine.

Left Leg: (Amputation, reduced / restricted strength / mobility in the knee or the ankle joints):

Right or Left Leg:

For any type of leg disability you may find it difficult to operate the side stand. This can usually be cured with the simple addition of a hand operated lever/linkage or moving the stand to the opposite side of the machine.

Right or Left Leg:

For any type of leg disability you may find it difficult to operate the side stand. This can usually be cured with the simple addition of a hand operated lever/linkage or moving the stand to the opposite side of the machine.

The kliktronic switches, the twin levers and the thumbrake are all available in 1” or 7/8” bar sizes.

The easiest method would be to use an electrongic gear change system such as the Kliktronic push button gear-changer www.kliktronic.co.uk. This unit works by pushing two buttons on the handlebars that operate an electronic actuator connected to the gear pedal. The Kliktronic gear-changer is supplied as a complete, easy to fit kit, which can be used on all styles of motorcycle.

Right Arm: (Amputation, Brachial Plexus Injury, reduced strength/ mobility in hands or fingers or elbow & shoulder joints):

Another method is to use a cross over linkage to the right side of the motorcycle, mounting the gear pedal either beside or in-front of the rear brake pedal.

1. Electronic push button gear-changer (to fit 1” and 7/8” bars) (“on-bar” or “under-bar” push-buttons)

2. “Crossover” to the right side of the motorcycle

This is usually a simple matter of transferring the throttle and front brake lever to the left handlebar. The front brake caliper can then be operated by a “twin lever” in tandem with the clutch lever (see www.klever2.com and/or www.pfmbrakes.com for twin lever kits) or by fitting a thumb operated lever below the left handlebar. Some switchgear may require adapting to suit left hand operation.

(www.bitzforbikes.co.uk)

If the disability of the rider just involves difficulty with operating a twist grip throttle (i.e. fused or stiff wrist, tendonitis etc) the only requirement may be the use of a thumb-operated throttle (as used on quads). Where it is a matter of reduced mobility or amputation of fingers or wrist problems it may be that a thumb operated brake lever will solve the problem. A further, though less common option would be to operate the front brake with a left foot pedal mounted behind the gear pedal for heel operation.

The kliktronic switches, the twin levers and the thumbrake are all available in 1” or 7/8” bar sizes.

Right Arm: (Amputation, Brachial Plexus Injury, reduced strength/ mobility in hands or fingers or elbow & shoulder joints):

This is usually a simple matter of transferring the throttle and front brake lever to the left handlebar. The front brake caliper can then be operated by a “twin lever” in tandem with the clutch lever (see www.klever2.com and/or www.pfmbrakes.com for twin lever kits) or by fitting a thumb operated lever below the left handlebar. Some switchgear may require adapting to suit left hand operation.

(www.bitzforbikes.co.uk)

If the disability of the rider just involves difficulty with operating a twist grip throttle (i.e. fused or stiff wrist, tendonitis etc) the only requirement may be the use of a thumb-operated throttle (as used on quads). Where it is a matter of reduced mobility or amputation of fingers or wrist problems it may be that a thumb operated brake lever will solve the problem.

A further, though less common option would be to operate the front brake with a left foot pedal mounted behind the gear pedal for heel operation.

1. Left-hand throttle

2. Right-hand thumb throttle

3. Left-hand thumb brake

4. Left-hand twin levers

5. Left-heel brake

Left Arm: (Amputation, Brachial Plexus Injury, reduced strength/ mobility in hands or fingers or elbow & shoulder joints):

In most cases this is a simple matter of adapting the clutch operating lever and some minor modification to the switchgear on the left handlebar. There are several ways to adapt the clutch lever depending on the severity of the individual’s disability. In the

Left Arm: (Amputation, Brachial Plexus Injury, reduced strength/ mobility in hands or fingers or elbow & shoulder joints):

In most cases this is a simple matter of adapting the clutch operating lever and some minor modification to the switchgear on the left handlebar. There are several ways to adapt the clutch lever depending on the severity of the individual’s disability. In the