Energy From Offshore Wind Materials ACTIVITY
MATERIALS IN KIT
ADDITIONAL MATERIALS NEEDED
Measuring Wind Speed
Pencils Snow cone cups Extra-long straws Straight pins Masking tape
Wind Can Do Work
Extra-long straws Small straws Binder clips Straight pins Masking tape
Large foam cups approximately 14 cm tall Rulers Hole punches Markers
Introduction to Electricity
Dowels Hubs Masking tape Turbine tower set-up (assembled)* Genecon Alligator clips
Poster board Small light bulb (3.8 V, 0.3 A) in socket Battery (any 1.5-volt AAA, AA, or D) Fan Glue
Wind Blade Investigations
Dowels Hubs Blade pitch protractor Sandpaper Masking tape Multimeters
Turbine tower set-ups (assembled)* Blade materials (flat balsa sheets, corrugated plastic sheets)
Extra/alternative blade materials Scissors Fan(s) Pennies (or other mass) Rulers Glue
Blade Aerodynamics
Turbine tower set-ups (assembled)* Hub Dowels
Airfoil blades Masking tape Blade pitch protractor Multimeter
Glue Fan
Anemometer Wind vane Compass
Hole punches Markers Scissors Stopwatches or timer Rulers String or thread Paper clips Fan(s) Scissors
Offshore Wind Developer Proposal
Colored pencils Highlighters Sticky notes Chart paper (optional)
Offshore Wind Turbine Challenge
Recycled or found materials such as cardboard, cups, plastic containers, foam, paper, straws, etc. Glue, tape, or fasteners
Scissors and construction tools as needed Large tub or aquarium Water Sand Fan
Bubble wrap Padded paper Cotton batting Noise maker toy Cardboard boxes
Tape Other insulation materials (optional) Rulers Scissors
Sound Waves and Whales
Sound level meter
*See pages 27-28 for turbine tower assembly instructions.
NOTE: You can build your own turbine towers using PVC pipe.
For directions, visit www.energy.gov/eere/education/downloads/building-basic-pvc-wind-turbine.
©2021 The NEED Project
Energy From Offshore Wind Teacher Guide
www.NEED.org
5
