from
Reliability Outfitters Inc. Douglas.A.Low@gmail.com
(315) 278-2774
Introducing the only non-restricting flow sensor for the bilge system. • ShowFlow is the only system incorporating an electronic flow sensor, electronic bilge pump switch and bilge pump monitoring in a single package. • No more hanging overboard to see bilge flow. • Finally a way to see if the bilge has water and if the bilge pump is working without getting out of your seat.
Includes:
BiBi-color illuminated Button used to control and monitor the bilge pump.
Main Circuit board utilizes state of the art computer architecture. Includes protection from over voltages.
Bilge pump water detector employs electronic sensor with no moving parts to clog up and fail.
Piezo buzzer provides audio alerts in addition to the visual LED indicators.
Bilge pump flow sensor detects if water is actually flowing from the bilge. This unique feature allows the operator to see if water water is in the bilge without getting up.
Features: Features: Electronic Pump Switch •Flow detector keeps pump on until bilge dry •Can be used with or without external float switch
Water Flow Sensor •flow sensor
detects if water is flowing from the bilge
Alert detection: •No-Flow Alert – •Blinks red •Pump is on but no water is flowing •Indicates pump power should be disengaged •Max-Flow Alert – •Blinks red and green •Bilge water flowing for too long. •Indicates a constant leak
(could be float switch damage)
Activity Counter •Counts number of times the pump turns on. •Works while you are there or away. •Also remembers if you had a no-flow or max flow •Keeps all counts until manually reset.
situation
Increases Bilge Pump system reliability •Know the status of the bilge and bilge pump •Electronic bilge pump switch is inherently more reliable than mechanical •ShowFlow Electronics are internally protected against overvoltages.
Low profile illuminated button •Pushbutton IP65 Complaint •Electronics IP67 Complaint
(IP67 available)
switches