Heating Your Pool Using Solar Energy Is Highly Cost-Effective Today, it has become possible to heat your pool using solar energy. Your swimming pool system already includes the controller, pump and filter with PVC pipes, which route the flow of the water. Merely crack into the PVC line after the filter and operate a couple of flex hoses (or PVC, if you wish) to the solar collector panel that you can set up on the ground or set next to a hill to acquire some tilt towards the sun’s direction. After the valve is closed, water flows solely via the solar collector panel, which heats up the water. When the valve is opened, less water flows via the collector panel. In this manner, you can alter how much heat is being received by your pool water. At the majority of pool supply stores, solar collector panels are easily available. Approximately, for $300, you can get a 4 ft. x 20 ft. panel. Approximately, for $50 per piece, you get flex hoses. At times, adaptors are essential.
To achieve the best results from your heating system, follow the belowmentioned tips: As much as possible, you need to keep the solar panel protected from the wind. The solar collector panel should be placed where it gets most of the sunlight when the pool pump is functioning. Try minimising resistance to the water flow if you want to place the solar collector panel on the roof. You need to connect the solar collector panels in parallel if you want to use two or more of them. For optimal heating results, operate the pool pump when the sun is shining brightly during the day and ensure that you operate it for longer, which will produce more heat in the pool. The universal rule is that you need to use full collector surface area, which is almost half of your pool’s surface area. Nonetheless, it differs somewhat. The size of your collector surface area depends on many factors, which are listed below: What is the potential of solar energy when the pump is operating: You need to analyse how much sunlight you are receiving and how are your solar panels oriented? Location of the Pool: The heat loss is much greater if you have a pool that is above the ground. What you need is a collector having more surface area. Shade: Choosing to cut down a good old oak tree is not recommended if you’re a nature lover. Alternatively, you can choose a bigger collector. Operating time of the pump: To collect more heat in your pool for a given collector size, the pump must be operating for a longer period.
ďƒź Wind: Unless your collectors are glazed, they will operate inadequately if you have a lot of wind. A swimming pool is not a small investment, it requiresover$40,000. If you don’t have any type of swimming pool heater, your useable season may be about 4 months in a year. However, if you install a swimming pool heating system, you can expand your swimming season by another 4 to 6 months. That means you can swim throughout the year. This alone says a lot about the popularity of pool heaters. In a complete, professional solar pool heating system, when the pump is operating, the controller determines whether to activate the solar collectors by evaluating the temperature of the pool water and the temperature at the collectors. When heat is accessible at the collector, the motor valve opens up and the pump guides water up into the collectors and then pushes it back down to the swimming pool. Thermo Pools is one of the leading companies for supplying solar heat pumps and solar pool heating systems in Sydney.
Source: http://www.switchome.net/heating-your-pool-using-solar-energyis-highly-cost-effective.html