SOLUTIONS FOR THE ENERGY MARKET FASTENING SOLUTIONS THAT LAST IN THE HARSHEST ENERGY APPLICATIONS BAND-IT premium alloy fastening solutions are engineered to perform in extreme onshore, offshore and subsea oil and gas environments. Our energy team, alongside our local partner, Signfix® are specialists at completing any customer requirement—from product specifications, paperwork compliance, to utilising convenient locations for quick delivery. We will work with you to ensure total compliance and satisfaction on your project. With locations in Western Australia, Queensland, and New South Wales we are strategically placed to service the oil and gas industry throughout Australia through quick delivery and local customer service.
DOWNHOLE CLAMPING SOLUTIONS DESIGNED FOR HARSH-DUTY WELL ENVIRONMENTS
CORROSION RESISTANT SUBSEA CLAMPING SOLUTIONS THAT WILL LAST THE LIFETIME OF YOUR PROJECT
SIMPLE, PERMANENT SOLUTIONS FOR FRAC IRON RECERTIFICATION AND IDENTIFICATION PROGRAMS
©2018 BAND-IT IDEX. All Rights Reserved. E-100-AUS 6/2018
1300 1 SIGNFIX (1300 174 463) sales@signfix.com.au
DOWNHOLE CLAMPING SOLUTIONS
Manufactured using materials specifically for harsh-duty environments, BAND-FAST® and coil fastening solutions can be used to attach artificial lift, downhole oil and gas applications, such as ESP cables, control lines, capillary tubes, fiber optic lines, and intelligent completions.
BAND-FAST® PRE-CUT BANDS AND SEALS QUICKER INSTALLATION •
No additional work to make band clamp
•
Reduce additional measuring and cutting from coils
•
Repeatable, consistent clamp every time
•
Pre-bent Flat Seal BAND-FAST® allows for consistent location on cable and casing
BAND-FAST®
SAFER HANDLING •
Pre-cut clamps are free of sharp edges and burrs
•
Reduced cutting and clamp forming steps reduces chance of injury
•
Less time in hazardous work zone
EASIER INVENTORY MANAGEMENT •
Less scrap reduces inventory management costs
•
Easy to count, manage, and track band inventory (no additional weight or measurement calculations needed)
•
Minimal work & storage space needed vs large diameter coils
FLAT SEAL BAND-FAST®
COILS AND SEALS •
Available in a range of corrosion-resistant materials to match your well environment
•
Band and seals provide low cost downhole fastening solutions vs. other clamp types
•
13.6-18.1 kg “Safety Coils” allow for single operator safe handling
©2018 BAND-IT IDEX. All Rights Reserved. E-100-AUS 6/2018
1300 1 SIGNFIX (1300 174 463) sales@signfix.com.au
DOWNHOLE CLAMPING SOLUTIONS
ELECTRIC SUBMERSIBLE PUMP SYSTEMS ESP systems employ a centrifugal pump below the level of the reservoir fluids. Connected to a long electric motor, the pump is composed of several impellers, or blades, that move the fluids within the well. The whole system is installed at the bottom of the tubing string. An electric cable runs the length of the well, connecting the pump to a surface source of electricity.
CAPILLARY SYSTEMS Capillary systems (tube and strings) reduce build up caused by scale, paraffin, corrosion, and salting in artificial lift through various chemical injection.
MONITORING SYSTEMS Monitoring systems are used to record and transmit well pressure, temperature and performance data back to oilfield personnel. Monitoring systems vary and can include various sensors, fiber optics and gauges.
Š2018 BAND-IT IDEX. All Rights Reserved. E-100-AUS 6/2018
1300 1 SIGNFIX (1300 174 463) sales@signfix.com.au
SUBSEA APPLICATIONS
BAND-IT BAND-FAST® and coils are used to fasten many different types of subsea applications including VIV strakes, fairings, pipelines, risers, buoyancy modules, piggyback blocks, guides and saddles, pier and piling, umbilicals, esp cables, capillary tubes and reservoir monitoring systems.
•
PRE-CUT BAND-FAST®
Available in Zeron®100, Alloy 625, Titanium, 316 Stainless Steel, 200/300 Stainless Steel, and Carbon Steel
•
Precut clamps are free of sharp edges and burrs
•
Repeatable, consistent clamp every time
ZERON® 100 PRODUCTS
Zeron 100 material ensures superior corrosion resistance, outperforms
common oil & gas band materials, and has stable prices vs. high nickel content alloys. •
Zeron 100 is a cost effective banding alternative to Alloy 400, Alloy 625, & Other High Nickel Alloys.
•
Zeron 100 BAND-FAST offered in any custom length, and either 19.1 mm or 31.8 mm width. Coils and Seals available in Zeron 100 in 19.1 mm and 31.8 mm width.
ALLOY 625 JR. SMOOTH HOSE CLAMPS •
Available for applications up to 203 mm outside diameter
•
Permanent hose clamp, double wrapped for additional strength
©2018 BAND-IT IDEX. All Rights Reserved. E-100-AUS 6/2018
1300 1 SIGNFIX (1300 174 463) sales@signfix.com.au
SUBSEA APPLICATIONS
SECURING PROTECTORS & SUBSEA COMPONENTS
• • • • • • • •
Fire Suppresion Cable Management Buoyancy Modules Pier Piling Riser Protector Pipeline Protector VIV Strake Piggyback Pipe Lay
•
Secure protective layer around vital umbilical cord (electrical, hydraulic, chemical injection and fiber optic connections) between surface installations and subsea developments
•
Secure outer pipeline protector (polyethylene or foam material).
•
Secure subsea flowline and riser protectors
•
Secure VIV strakes (reduces drag) on submerged pipelines
•
Holding piggy back clamps, guides, & saddles in place.
©2018 BAND-IT IDEX. All Rights Reserved. E-100-AUS 6/2018
1300 1 SIGNFIX (1300 174 463) sales@signfix.com.au
IRON IDENTIFICATION BAND-IT coloured bands are used for frac iron recertification, asset management, and other visual identification programs. Whether you need to create an RFID-integrated band, custom marked band, or colour-matched band to a non-standard colour, our experienced team will partner with you to help solve your identification needs.
DOWNHOLE ACCESSORIES Downhole customers take advantage of our global warehousing and vendor managed inventory services to ensure BAND-IT products are always on-site. Purchasing accessories with your band and seal order ensures consistent high quality products and simplifies order processing.
BAND-IT ESP CABLE SPLICING TAPES BY NITTO •
Custom developed for downhole cable splicing
•
The highest quality downhole tapes on the market
PRODUCT SPECIFICATIONS PART N UM BE R
DES CR I PT I O N
DTHT036
High Temp Tape 25mm x 32m
DTHM018L
High Mod Tape with Liner 25mm x 16m
DTGC060
Glass Cloth Tape 25mm x 54m
DTDS018
Double Stick Tape 25mm x 16m
E20002
Lead Tape 1.2m
E20001
Lead Tape 60m
©2018 BAND-IT IDEX. All Rights Reserved. E-100-AUS 6/2018
1300 1 SIGNFIX (1300 174 463) sales@signfix.com.au
DOWNHOLE ACCESSORIES
NICOPRESS COPPER SPLICING SLEEVES Sleeves are designed to splice copper conductors in full and partial tension applications. Each sleeve is marked with a stock number, conductor size, and installation tool groove to ensure proper application.
PRODUCT SPECIFICATIONS W I R E SI ZE ( A W G) P A RT N UM BE R
FR O M
TO
LE NG T H
T OOL G ROOVE
P A CK A G E Q TY
DS014
2 CPT & 2 SOL
2 CPT & 2 SOL
50mm
X
100
DS015
2 CPT & 2 SOL
4 SOL
50mm
X
100
DS016
2 CPT & 2 SOL
6 SOL
50mm
X
100
DS028
2-7 STR
7 SOL
50mm
X
100
DS029
4 SOL
4 SOL
50mm
P
100
DS030
4 SOL
6-7 STR & 5 SOL
50mm
X
100
DS031
4 SOL
6 SOL
50mm
P
100
DS035
4 SOL
7 SOL
50mm
P
100
DS036
6-7 STR
5 SOL & 6 SOL
50mm
P
100
DS036
6 SOL
6 SOL
50mm
J
100
CABLE GUARDS Used to protect ESP cables, control lines, or encapsulated lines. Use Super Bands for quick installation.
©2018 BAND-IT IDEX. All Rights Reserved. E-100-AUS 6/2018
1300 1 SIGNFIX (1300 174 463) sales@signfix.com.au
INSTALLATION TOOLS Downhole Banding BAND-IT sells a full range of hand and powered installation tools for all of our banding products. The XE4809 Fromm Pneumatic Combination tool tensions, seals, and cuts 19mm bands and seals.
Subsea Banding The X80304 Signode Pneumatic Combination tool tensions, seals, and cuts 32mm bands and seals.
G40269: GIANT BANDING TOOL The G40269 is the strongest BAND-IT hand tool. This tool is designed for use with 19mm, 25mm, 31.75mm width X 1.12mm thick Giant Band & Buckle. Tool will tension beyond the limits of the 5500 lbs of force to yield 201 Stainless Steel Giant Band material. C00369: HEAVY DUTY BANDING TOOL A heavy duty version of the C00169: Standard Banding Tool tool. Primarily designed for thicker materials and is not recommended for band widths 0.015” or 0.020”. This tool can be used for 1. 12mm X 19mm wide Giant Band. Tool will tension beyond the limits of the 3300 lbs of force to yield 19mm wide 201SS Giant Band.
Colour Identification Bands T3006 9: CENTRE PUNCH TOOL Used to apply BAND-IT® 9.5mm and 16mm Centre Punch Clamps, 201 Stainless Steel Band and Galvanized Carbon Steel Clamps. Nicopress Copper Splicing Sleeve Crimp Tool The tool is designed to create maximum metal flow of the splicing sleeve around the wire or conductor. This results in splices that are strong and reliable. The toggle-action mechanism produces perfect splices with a minimum of handle force.
CONTACT YOUR BAND-IT SALES TEAM Signfix Australia Locations
Phone Fax Email Web
1300 174 463 02 4033 6599 sales@signfix.com.au www.signfix.com.au/band-it
New South Wales Head Office 63 Bonville Avenue Thornton NSW 2322
Queensland 6/38 Eastern Service Road Stapylton QLD 4207
©2018 BAND-IT IDEX. All Rights Reserved. E-100-AUS 6/2018
Western Australia Unit 312, 396 Scarborough Beach Road Osborne Park WA 6007
1300 1 SIGNFIX (1300 174 463) sales@signfix.com.au