GUARDRAIL, BRIDGE RAIL & CONCRETE BARRIER DELINEATORS A PART OF DELNORTH GROUP
HIGHWAY DELINEATORS Hylyte is Australia’s leading provider of highway delineation products for guardrail, bridge rail and concrete barriers. Hylyte delineators are made from UV stabilised nylon 6 and PVC, complete with class 1a reflective film. Upon impact, a Hylyte delineator will return to its original upright position, maintaining a high level of road safety at all times.
Joint 5
Joint 10
5,000mm2 delineator area
10,000mm2 delineator area
DGRJ5
DGRJ10
DGRJ5R
DGRJ10R
DGRJ5A
DGRJ10A
DGRJ5W
DGRJ10W
Front/Back (red/white)
Front/Back (red/white)
Front only (red)
Front only (red)
Front only (amber)
Front only (amber)
Front only (white)
Front only (white)
Using the existing guardrail fittings, the Joint 5 conveniently mounts onto the joining bolt on top of the guardrail. The Joint 5 is made using injection moulded nylon 6 with UV stabiliser. The shatterproof substrate is sized to display a 50mm x 100mm class 1a delineator.
Using the existing guardrail fittings, the Joint 10 conveniently mounts onto the joining bolt on top of the guardrail. The Joint 10 is made using injection moulded nylon 6 with UV stabiliser. The shatterproof substrate is sized to display a 80mm x 125mm class 1a delineator.
Paddle 5
Paddle 10
5,000mm2 delineator area DGRP5
DGRP10
DGRP5R
DGRP10R
DGRP5A
DGRP10A
DGRP5W
DGRP10W
Front/Back (red/white)
Front/Back (red/white)
Front only (red)
Front only (red)
Front only (amber)
Front only (amber)
Front only (white)
Front only (white)
The Paddle 5 is designed for installation onto the C block of the guardrail and comes complete with pre-drilled holes and M5 fixings to secure in place. The Paddle 5 is made from UV stabilised PVC and sized to display a 5,000mm2 class 1a delineator.
1300 794 397
10,000mm2 delineator area
The Paddle 10 is designed for installation onto the C block of the guardrail and comes complete with pre-drilled holes and M5 fixings to secure in place. The Paddle 10 is made from UV stabilised PVC and sized to display a 10,000mm2 class 1a delineator.
sales@delnorth.com
hylyte.com.au
Twist 5
5,000mm2 delineator area
Twist 10
10,000mm2 delineator area
DGRT5
DGRT10
DGRT5R
DGRT10R
Front/Back (red/white)
Front/Back (red/white)
Front only (red)
Front only (red)
Using existing guardrail fittings, the Twist 5 mounts behind the “W” barrier on the bolt, inside the “U” channel space. The face of the “U” channel locks it in an upright position. The Twist 5 is soft impact and made from 3mm UV stabilised PVC and sized to display a 5,000mm2 delineator.
Using existing guardrail fittings, the Twist 10 mounts behind the “W” barrier on the bolt, inside the “U” channel space. The face of the “U” channel locks it in an upright position. The Twist 10 is soft impact and made from 3mm UV stabilised PVC and sized to display a 10,000mm2 delineator.
Elle 5
Elle 10
5,000mm2 delineator area
10,000mm2 delineator area
DCBE5
DCBE10
DCBE5R
DCBE10R
DCBE5A
DCBE10A
DCBE5W
DCBE10W
Front/Back (red/white)
Front/Back (red/white)
Front only (red)
Front only (red)
Front only (amber)
Front only (amber)
Front only (white)
Front only (white)
Designed for installation on pre-cast concrete barriers or bridge rails, the Elle 5 is fixed with adhesive onto the concrete barrier and has a slot or hole that slides under the existing bolts on bridge rails. The Elle 5 is a soft impact delineator and is made from UV stabilised PVC and sized to display a 5,000mm2 class 1a delineator.
Designed for installation on pre-cast concrete barriers or bridge rails, the Elle 10 is fixed with adhesive onto the concrete barrier and has a slot or hole that slides under the existing bolts on bridge rails. The Elle 10 is a soft impact delineator and is made from UV stabilised PVC and sized to display a 10,000mm2 class 1a delineator.
Butterfly
Hazard
5,000mm2 delineator area
10,000mm2 delineator area DGRBY
DGRB
Front/Back (black and yellow)
Front/Back (red/white)
The Butterfly mounts in the ‘V’ of the guardrail onto the existing bolt, with the head of the bolt, used to hold the Butterfly snuggly in place. The Butterfly is made using a high-quality triangular polymer extrusion and available in black or white sized to display a 5,000mm2 delineator.
The Hazard Barrier is designed for installation on pre-cast concrete barriers and is fixed with high strength adhesive that forms a rivet type hold when it swells into the 12mm hole. The Hazard Barrier is made from Nylon 6 with UV stabilisation and sized to display a 10,000mm2 Angled Class 1a band.
CONTACT US 1300 794 397 sales@delnorth.com hylyte.com.au
Head Office 63 Bonville Avenue Thornton, NSW, 2322 Australia
Queensland 6/38 Eastern Service Rd, Stapylton, QLD, 4207
Western Australia Unit 312 / 396 Scarbourough Beach Rd, Osborne Park, WA, 6017