PRODUCTS&PARTS
BY TOM COMERRO
British Consoles MOSS MOTORS • 800-667-7872 MOSSMOTORS.COM • $99.99
MG and Triumph owners know that their consoles sit a little low, making them a bit uncomfortable for longer drives. New ergonomic center consoles for the 1961’72 MGB, Triumph TR2-4, and Midget/ Sprite increase the height of your console, allowing you use it as a comfortable armrest. The new console is designed to fit between the seats and can be held in place by the seat cushions. Each comes with a stainless-steel cup holder, plus a power outlet for GPS or USB charging. Best of all, the console can be easily removed and reinstalled should you desire to keep the stock look at concours events or car shows. Consoles feature four small tabs to screw or Velcro the console in place. The cup holder measures 2 5⁄8 inches and it is recommended that the power outlet be professionally wired. Inquire about p/n 453-965 for more information.
Hang Time WALDRON EXHAUST • 800-503-9428 WALDRONEXHAUST.COM • $306
Original-equipment-style muffler and tailpipe hangers are now available for full-size 1956-’57 Pontiacs. The reproduced set of four is identical in appearance and function to the originals used on full-size Pontiacs with a dual exhaust system. Each set is made to order, so factor in this lead time when ordering. Note, too, that the set is not complete, as it does not include the hanger used on the driver’s side rear exhaust pipe. Ask about p/n WAF93734 for more details.
12
Caddy Pans ORIGINAL PARTS GROUP 800-243-8355 • OPGI.COM • $256.99/PAIR
After more than 65 years, it might be time to replace the front floorpans in your classic Cadillac if rust and corrosion have taken hold. These reproduced parts will fit the 1954’56 Calais, Fleetwood, Series 62, and Series 65. They are stamped with the same specifications as the factory pans, and they will fit exactly like the originals. All are made from heavygauge steel, with the same grooves and ribbing for reinforced durability. The hardware is sold separately, and rear pans are also available. Ask about p/n CE06122-PR.
HEMMINGS CLASSIC CAR SEPTEMBER 2022 I Hemmings.com
Protect Your Back Jack TRAC TIRE ROTATION ASSISTANCE CART • 720-231-1839 LIFTWITHTRAC.COM • $135
Tire removal and installation can take its toll on your arms and back, especially if you work in a shop. The new TRAC Tire Jack, designed specifically for tire and wheel removal, uses precise leverage to save you physical stress. Simply slide the Tire Jack under the tire when the vehicle is jacked up, step on the plate, and pull the wheel and tire away with minimal effort. Mounting the wheel and tire is just as easy, and no longer requires you to balance the heavy assembly while trying to spin on lug nuts or bolts. Each tool is heavy-duty welded steel construction and has steel base rollers to provide extra support and mobility. The Trac Tire Jack is small and portable, weighing just 5 pounds and measuring 18.5 inches long, 5 inches wide, and 2 inches high. Visit the website for a video demonstration.
Prices shown are presumed accurate at the time of printing. Please confirm with seller prior to purchase.
