DEFYING THE ODDS HOW 7.3L’S ARE MAKING QUICK AND CONSISTENT 7.70, 6.70, AND 5.90 INDEX PASSES

DEFYING THE ODDS

HOW 7.3L’S ARE MAKING QUICK AND CONSISTENT 7.70, 6.70, AND 5.90 INDEX PASSES

As horsepower increases and drag racing goals become more serious, the 7.3L Power Stroke inevitably requires a built bottom end. Upgraded rods, thermal and dry-film coated pistons, crankcase girdles or bed plates, ARP main studs, half-filled water jackets, and fire-ring grooves are all employed to ready a 7.3L for elevated boost and cylinder pressure.

While built engines are typical (as well as advised) for index racing 7.3L’s, it isn’t completely necessary. Take Matt Maier’s 7.70 Index OBS Ford for example. He competed on a stock forged-rod bottom end for years before the engine dropped compression (due to bent rods), forcing him to break the seal and make some upgrades.

While there are many weak links within the 7.3L’s factory long block, the primary reason for reinforcing one for coping with higher horsepower is due to the stock connecting rods’ propensity to fail. High-quality, proven aftermarket replacements include the forged Ultimax rods from Hypermax, Carrillo’s H-beam units, the ProHD series from Brian Crower, and the Pro I-beam rods offered by Manley (shown here).

Everyone loves an underdog. And in the world of diesel drag racing it doesn’t get much more “long-shot” status than it does with the 7.3L Power Stroke. Still, there are a select few that continue to choose to campaign these early electronically-controlled relics in modern times. It’s a race program that’s built on some of the most cuttingedge 7.3L parts you’ll find anywhere, but believe it or not the horsepower recipes are simpler than one might initially think. Big hybrid injectors, increased high-pressure oil volume, ample low-pressure fuel supply, and sound PCM tuning all allow the factory HEUI injection system to be retained while making north of 1,000 hp. And taking cues from the Cummins crowd, big single turbochargers and nitrous are the norm as well.

This month, we’re showcasing several examples of 7.3L owners who race in the Outlaw Diesel Super Series’ 7.70 Index, 6.70 Index, and even its 5.90 Index classes. In the eighth-mile, two of them have even dipped deep into the 5’s, including a 5.46-second blast and a 5.72-second effort. The 7.70 Index candidate has been as quick as 7.0 in the ‘660, 11.0 in the quarter, still gets daily-driven, tows, hauls, and regularly partakes in cross-country camping trips. To watch these trucks continue to defy the odds in diesel drag racing, look for them at an ODSS event near you this summer.

OEM-derived, cast-aluminum pistons are par for the course in most built 7.3L engines in index racing, albeit with a few key tweaks. De-lipping (removing the sharp edge from the factory fuel bowl), valve relieving (typically for high-rpm valve clearance), and special coatings are all common here, the latter usually consisting of a ceramic,

thermal barrier up top to hold up to extreme EGT and a dry-film lubricant for reduced

friction on the skirts. We’ll note that low-friction, DLC coatings are used on 7.3L wrist pins in many circumstances, too.

In the same arena as a factory 12-valve Cummins head, the 7.3L’s cast-iron heads

flow terribly in stock form. This produces a fuel-only horsepower wall of roughly 650rwhp on most trucks. Shops like Carson Stauffer, Swamps, and Crutchfield Machine have

seen tremendous results from porting 7.3L heads, the latter company having sponsored a

set that unlocked an additional 100hp in Brian Jelich’s ’00 Super Duty—a 1,000hp truck that was both streetable and running 6’s in the eighth-mile at the time.

Although it took years to get manufacturers to

bring an aftermarket camshaft for the 7.3L to market,

the results—especially when combined with the aforementioned ported heads—have been impressive.

With a cam like what’s offered by Colt Cams or Gearhead Sales you have the ability to both introduce fresh air quicker and rid the cylinders of heat faster, which means quicker spool up, added high-rpm power, and reduced

EGT. A cam upgrade isn’t a prerequisite for a high-

horsepower 7.3L, but it certainly makes one more drivable on the street and user-friendly at the track.

For their ability to hold down the fort, even in non-fire-ring applications that see 75-psi of boost, ARP head studs are up to the task. In fire-ringed engines, upward of 75-psi (along with triple-digit drive pressure) remains a

non-issue for these time-tested fasteners.

In nearly every high-horsepower 7.3L build these days, you’ll find a dual high-

pressure oil pump combination lurking at the front of the lifter valley. Whether it’s a dual HPOP kit from Full Force Diesel or a Swamps Gen3 residing over a stock HPOP, either combination can support the high-pressure oil needs of virtually any 7.3L injector ever offered. Supported by a higher volume low-pressure oil pump such as a Melling LPOP or especially DieselSite’s LPOP, there is no stopping a dual HPOP 7.3L from feeding all the oil in the world to a set of massive injectors.

Competition level injectors used in the 7.3L realm

range from 350cc hybrids equipped with 200-percent larger nozzles to 400cc, 400-percent over nozzle hybrids, to 455cc hybrids with 400-percent larger nozzles. In each

instance, and with the right amount of low-pressure fuel

supply (lift pump) and injection control pressure (ICP, or high-pressure oil) on tap, either size injector can support well north of 1,000 hp with the right amount of air (i.e. turbo and nitrous).

A key piece in the power-making puzzle is a sufficient low-pressure

fuel supply system. A minimum of 65-psi needs to be delivered to the 7.3L’s injectors at all times, along with ample volume. Most aftermarket or homemade competition fuel systems entail at least ½-inch diameter feed

lines, larger supply fittings in the heads (typically -6 AN), and a reputable

lift pump along the frame rail. Fuelab or Aeromotive pumps usually get the nod in competition applications.

To keep fuel flow consistent to each cylinder, regulated return

systems have not only become standard on competition 7.3L engines,

but on modified 7.3L’s in general. Both fuel rails are tied in together via a bypass adjustable fuel pressure regulator, where the aforementioned (and optimum) 65-psi or higher pressure is set.

Be it due to avoided complexity, 444 cubic inches generally not having a

problem with spooling a big single, or the fact that a single charger is easier on an engine, compound turbos aren’t common in the big power realm of

the 7.3L segment. After all, a moderately-sized S400 frame turbo can be brought to life fairly quick during staging (such as in Matt Maier’s 7.70 Index case with an S467.7), and a small spool jet can help spin up a larger S400 if needed (such as in Brian Jelich’s 5.90 Index case with an S480). Here, the T4

turbo mounting system from Irate Diesel Performance aboard Matt Maier’s

OBS is on display. For comparison sake, Brian Jelich’s higher-flowing T6

system was custom-fabricated by Paul’s Custom Fabrication and Machine for his one-off, front-mount-type turbo application.

While we could see more GT55 Garrett stuff creep into the 7.3L index racing world at some point, for now the BorgWarner S400 seems to be the snail of choice. But that doesn’t mean that all S400’s are created equal. In Matt Maier’s aforementioned 7.70 setup, a box T4 S467.7 FMW does the trick. However, in Brian Jelich’s 5.90 application—where

elapsed times occasionally push into Pro Street territory—a T6 flange S480 from KC Turbos is employed. Jelich’s S480 is shown here, with the 80/96/1.32 A/R charger’s billet 13-blade compressor wheel exposed.

To be sure, all 7.3L’s are fuel-limited thanks to the HEUI system. This is why nitrous plays a role in making them competitive. And even though Matt Maier’s OBS Ford can run 7.70 Index on fuel, his 7.0 (eighth-mile) and 11.0 (quarter-mile) passes were only possible on spray (and equates to about 900-rwhp on spray, vs. 650-rwhp on fuel). As for Zack Pierce’s 6.70 and potentially soon-to-be 5.90 Index crew cab Super Duty, a fair amount of N20 is on tap to get his behemoth turning in the ET’s and trap speeds it does. As for Brian Jelich’s 5.90 setup, a surprisingly mild, two-stage setup is all he campaigns.

A whole other rabbit hole within the top ranks of 7.3L

racers is tuning, and how tuners go about getting the most out of the giant hybrid injectors they’re forced to tame.

Some tune their own while others rely on time-tested, track-proven calibrators to write their race-winning files for them. Regardless who is hitting the keystrokes, by and large most PCM’s are tuned using Power Hungry

Performance’s Minotaur software—and most of those

run a PHP Hydra Chip. 5.90 racer Brian Jelich tunes his

own truck (and does so under the Jelibuilt Performance

nameplate) while 7.70 driver Matt Maier prefers Gearhead

Sales handles his.

Two-stage nitrous arrangements gets most index

racing 7.3L’s where they need to be, but Matt Maier’s

setup, which has been pushed north of 1,000 hp several times on the chassis dyno, holds a third stage (and a .157 jet) in reserve. Believe it or not, to make consistent 5.90

passes Brian Jelich’s nitrous arrangement only entails the use of a 0.30 spool jet and a .070 jet to get the job done.

Obviously most 7.3L die-hards are dyed-in-the-wool Ford fans also, which helps explain why the E4OD or 4R100 transmission usually remains in the mix when they take things to the next level. Brian’s Truck Shop, John Wood Automotive, Wyse Auto Repair, and Twisted Diesel-built transmissions have all been tried behind high-horsepower 7.3L’s with great success. The former builder was responsible for this one, a Level 4 version mounted in Brian Jelich’s 5.90 Super Duty. It conceals an Aermet input shaft, an oversized 300M intermediate, and a 300M output, along with a billet-steel forward drum and overdrive planetary, and a spragless, 1,900-rpm stall Precision Industries converter. Shift points and converter lockup are commanded via a TCM-2800 from Powertrain Control Solutions.

To get around the intermittent shifting issues caused by the OBS Ford factory electronics (in short, they can freak out when the transmission

requires an upshift five times sooner than stock), Matt Maier built his own

shift box. By having full control over both his shift points and when he locks the torque converter, Matt’s consistency at the drag strip improved considerably.

Zack Pierce has been a regular 6.70 Index competitor on the ODSS scene over the years and claimed Third in points in 2021. Now, after having shown what his ’02 F-250 was truly capable of at Diesel Truck Wars last fall, he appears to be setting his sights on running 5.90 Index. With a 5.72-second pass at 122 mph under his belt at that event, his crew

cab Super Duty definitely has what it takes to go rounds in a quicker

racing category.

Matt Maier’s racing days go way back with his ’97 F-250, a truck he’s owned for 15 years now. With a solid 7.70 Index program, Matt went rounds at nearly all the national events he attended, and even won the 11.90 Index class two years in a row at the former Diesel Thunder race in Mississippi. When leaned on, his OBS has been as quick as 7.0 in the eighth and 11.0 in the quarter—not bad for a daily driver that still tows a 40-foot gooseneck!

Though Zack will have to slow things down to run 5.90, it’s always easier to pull fuel and back things off than it is to have to engage in an all-out effort each pass. But even detuned, the big red Ford will have to apply roughly 1,300 hp to the track in order to turn in consistent 5.9-second passes. Based on what we’ve seen in the past, somehow we think his equipment will be up to the challenge…

Back in 2018, this was the 6.70 Index recipe Zack Pierce was running, but all of it is different now. Instead of the big single being mounted in the traditional location at the back of the lifter valley, the turbo (a larger, Garrett GTX5020R) is front-mounted. A 100-psi, Petersonsourced wet sump oil system is in play now, too, along with a set of

big-valve, worked-over Crutchfield Machine heads.

At 5,900 pounds, Zack Pierce’s first-generation Super Duty is about as stripped down as it gets—just look at the interior. More than 1,400

to 1,600 pounds has likely been removed from the crew cab short bed’s original heft.

David Beach’s super cab long bed OBS is yet to officially enter the ranks of ODSS, but

under a previous owner it went 6.68 at 107

mph. In all likelihood that means David will

be gunning for 6.70 Index. At approximately 6,600 pounds, running the class will call for roughly 1,100 hp each pass, not a big deal with a bit of spray. Already having a

7.70-second (low 12-second) Super Duty

in his stable, making the jump to a quicker

racing category is well within David’s (and

his truck’s) capabilities.

With a race weight of 4,300 pounds, the built 7.3L engine in Brian Jelich’s fiberglass ’00 Super Duty barely breaks a sweat when

it makes passes in 5.90 Index. In fact, Brian’s quickest pass in the truck so far,

a 5.46 at 127 mph, required somewhere

in the neighborhood of 1,250 hp at the wheels—which is far from leaning on the

engine. With a brand-new 7.3L fitted with

the latest and greatest parts in the works, expect more spray to be used during the course of his next “hero” pass—and a trip noticeably deeper into the 5’s.

TURBO COVEREASY FIT IMPROVES HORSEPOWER HEAT SHIELDS FOR THE BIG TURBOS

Enter code DW20 to receive 20% off your order at ThermoTec.com to receive 20% off your order at ThermoTec.com

(800) 274-8437 www.ThermoTec.com Available at:

GET T HE BE S T OF LI VE T V & ON DEM A ND WI T H NO ANNUAL CONTRACT

DIRECTV STREAM Device (sold separately)

Get HBO Max™ included for first 3 months

with CHOICE™ or ULTIMATE package. *

*Subject to change.HBO Max auto-renews after 3 months at then prevailing rate (currently $14.99/mo.), unless you change or cancel. Req’s you to select offer.

CHOICE™ PACKAGE 90+ Live T V Channels

$8 4 99 † MO. + tax

See below for details. • No annual contract required, No hidden fees • The best of Live TV & On Demand on all your favorite screens • Stream on 20 devices at once in your home—including your TVs, tablets, smartphones and other connected devices*

*Minimum internet speed of 8Mbps per stream for optimal viewing. All 20 DIRECTV streams must be on the same home network and a compatible router is required. Certain channels are excluded. Limit 3 concurrent out-of-home DIRECTV streams. Restrictions apply. See directv.com/20streams for details.

Access HBO Max only through HBO Max app or hbomax.com HBO Max also includes HBO channels and On Demand on DIRECTV STREAM. Data rates may apply for app download/usage. Offer not available to DIRECTV and U-verse TV customers switching to DIRECTV STREAM. See back for details.

Contact Your Local DIRECTV Dealer

IVS Support Holdings 844.765.5487

DIRECTV STREAM requires high-speed Internet. Minimum internet speed of 8Mbps per stream recommended for optimal viewing. †DIRECTV STREAM: Service subject to DIRECTV STREAM terms and conditions (see directv.com/legal/). Compatible device req’d. Residential U.S. customers only (excludes Puerto Rico and U.S. Virgin Islands). Your DIRECTV STREAM service renews monthly at the prevailing rate, charged to your payment method on file unless you cancel. Once you’ve canceled, you can access DIRECTV STREAM through the remaining monthly period. New customers who cancel service in the first 14 days will receive a full refund. Otherwise, no refunds or credits for any partial-month periods or unwatched content. Returning customers who disconnected service within previous 12 months are not eligible for a refund. DIRECTV STREAM: Device for well-qualified customers $5/mo. each for 24/mos. on 0% APR installment agreement; otherwise $120 each. Applicable taxes due at sale. Non-qualified customers must purchase devices up front. Purchased devices may be returned within 14 days for a full refund. Devices purchased on installment agreement subject to additional terms and conditions. See cancellation policy at directv.com/legal/directv-stream-cancellation-policy/ for more details. Regional Sports & Local Channels: Regional Sports available with CHOICE and above. Not available in select areas. Channels vary by package & billing region. Device may need to be in billing region in order to view. Limits: Offers may not be available through all channels and in select areas. Programming subject to blackout restrictions. Pricing, channels, features, and terms are subject to change & may be modified or discontinued at any time without notice. See directv.com/stream for details. HBO Max: Access HBO Max through HBO Max app or hbomax.com with your DIRECTV log-in credentials. Compatible device or browser required. Use of HBO Max is subject to its own terms and conditions, see hbomax.com/terms-of-use for details. Programming and content subj. to change. Upon cancellation of your video service you may lose access to HBO Max. Limits: Access to one HBO Max account per DIRECTV account holder. May not be stackable w/other offers, credits or discounts. To learn more, visit directv.com/hbomax. HBO MAX is used under license. Google, Google Play, and Android TV are trademarks of Google LLC. ©2021 DIRECTV. DIRECTV and all other DIRECTV marks are trademarks of DIRECTV, LLC. All other marks are the property of their respective owners.

April 9th Sacramento CA April 24th Siskiyou Diesel OR May 7th Randy’s Transmission UT May 14-15 Music City Showdown Nashville June 3-5 UCC Indiana July 30th Pure Addiction OR August 6th Colorado August 27th Daily Driven ID Sept 10th DPS WY Sept 17th Edge UT Sept 24th Flog UT Oct 1st Spokane WA

April 9th Sacramento CA April 24th Siskiyou Diesel OR July 30th Pure Addiction OR August 6th Colorado Oct 1st Spokane WA