P 07 5471 7455 E admin@ozzycranes.com.au www.ozzycranes.com.au
• Leveling capability up to 12 degrees.
• Suitable for any commercially available 6 x 4, 6 x 6, 8 x 4 or 8 x 8.
• High torque, two speed.
11 6 7
• 600 LTR inbuilt water tank with pump and hose reel.
RCI
•
HYDRAULIC
Standard/passenger side
25 LTR/min
1
1
CAB CHASSIS
2 BORER MOTOR
5
OUTRIGGERS
WATER TANK
Rob way RCI – Model 8510.
• Rated capacity indicator. TOOL OUTLET & REEL
•
8
•
POLE CARRYING
• Kerbside, drop-in manual type. STORAGE
• Various storage options available to suit any requirement.
BORER MOTOR STOW
• Hydraulically operated stow system for borer motor
FULLY PROPORTIONAL HYDRAULIC
• Joystick control.
EMERGENCY DC PUMP
POLE GRABS
• Double acting.
• Various options available.
2
9 12 3
3 4 5
SINGLE
HYDRAULIC
12
10 11 10 9 4 8
6 7
MODEL 5/10 - 15 SERIES
REAR MOUNT
Ozzy Crane Borers have been designed and manufactured in Australia to comply with Australian standards and relevant statutory regulations as an attachment to fit any commercially available 6 x 4, 6 x 6, 8 x 4 or 8 x 8 diesel cab chassis truck of your preferred choice.
Ideally suited for use within the electricity industry for the installation and maintenance of power poles as well as the associated day to day equipment lifting.
Winch
Hydraulic
Emergency power suppl.
Low
Load
Vehicle mounted rear mount turret
AS1418.1,
Any
Capacity Single
5
10
max
Maximum Hook Height Single fall rope
fall rope 15.5 Metres 10.6 Metres Maximum Outreach Boom horizontal 13.8 Meters Max Outreach Capacity Maximum outreach 1.5 Tonne Boom Section Construction High strength square section tube and fabrication Jib
Boom Elevation Above horizontal Below horizontal 74º -15º
SPECIFICATIONS Type
Standards
AS1418.5 & AS2550.1 Cab/Chassis
commercially available 6 x 4, or 6 x 6 , 8 x 4 8 x 8 diesel cab chassis Lifting
fall rope Double fall rope
Tonne max capacity
Tonne
capacity
Double
point.
Slew 360º Continuous
Make/Model
Speed
Infinitely
Rope 16mm
Max line pull Max line pull
Ozzy Crane 5 Tonne (single fall) 10 Tonne (double fall)
variable single speed Winch
diameter non-rotating
Standard Borer Motor Type Motor Make Drilling Torque Speed Drilling Radius Epicyclic Direct Drive Digga Up to Maximum Torque Infinitely Variable Maximum Minimum 22,000 Nm 0-53 rpm 8.6 Metres 5.0 Metres Hole Depth (without extensions) Maximum 3.2 Metres
4 x Hydraulically operated heavy duty out and down type capable of levelling the unit. 11.63º slopes. Self-levelling footplates.
Pole Grabs
Stabilisers
System Variable displacement load sensing pump
pressure hydraulic pilot operated joysticks High pressure and return line filters
Management
Travelling Height 4100mm (typical) Overall Width 2500mm Overall Length 9300mm (typical)
Digital load management fitted with optional slew zone sectionalisation.
range chart only provides approx information regarding loads.
This
MODEL 6/10 - 16 SERIES
REAR MOUNT
Ozzy Crane Borers have been designed and manufactured in Australia to comply with Australian standards and relevant statutory regulations as an attachment to fit any commercially available 6 x 4, 6 x 6, 8 x 4 or 8 x 8 diesel cab chassis truck of your preferred choice.
Ideally suited for use within the electricity industry for the installation and maintenance of power poles as well as the associated day to day equipment lifting.
This
options)
Hydraulic
displacement load sensing pump
Emergency power supply
Low pressure hydraulic pilot operated joysticks High pressure and return line filters
Load
SPECIFICATIONS Type Vehicle mounted rear mount turret Standards AS1418.1, AS1418.5 & AS2550.1 Cab/Chassis Any commercially available 6 x 4, or 6 x 6
8 x 4 8 x
diesel
chassis Lifting Capacity Single fall rope Double fall rope 6 Tonne max capacity 10 Tonne max capacity Maximum Hook Height Single fall rope Double fall rope 16 Metres 10.6 Metres Maximum Outreach Boom horizontal 14.2 Meters Max Outreach Capacity 14.2 outreach - horizontal 13.4 outreach - horizontal 1 Tonne 1.5 Tonne Boom Section Construction High strength square section tube and fabrication Jib point. Boom Elevation Above horizontal Below horizontal 74º -15º Slew 360º Continuous
Make/Model Max line pull Max line pull Speed Ozzy Crane 6 Tonne (single fall) 10 Tonne (double fall) Infinitely variable single speed
Rope 16mm diameter non-rotating
Grabs
(various
Borer Motor Type Motor Make Drilling Torque Speed Drilling Radius Epicyclic Direct Drive Digga Maximum Torque 2 speed Maximum Minimum 22,000 Nm 0-53 rpm 8.3 Metres 5.0 Metres Hole Depth (without extensions) Maximum 3.7 Metres Stabilisers 4 x Hydraulically operated heavy duty out and down type capable of levelling the unit. 11.63º slopes. Self-levelling footplates.
,
8
cab
Winch
Winch
Pole
Standard
System Variable
Management
Height 4200mm (typical) Overall Width 2500mm Overall Length 9300mm (typical)
Robway 8510 Digital load management fitted with optional slew zone sectionalisation Travelling
approx information
loads.
range chart only provides
regarding
Winch Rope 16mm diameter non-rotating
Pole Grabs Standard (various options)
Ozzy Crane 6 Tonne (single fall) 10 Tonne (double fall)
variable single speed
Hydraulic System
Load
Variable displacement load sensing pump
Emergency power supply
Low pressure hydraulic pilot operated joysticks
High pressure and return line filters
Robway 8510 digital load management fitted with optional slew zone sectionalisation Travelling
Stepped
Tow
Bolster
ring feeder
SPECIFICATIONS Type Vehicle mounted forward mount turret Cab/Chassis Any commercially available 6 x 4, 8 x 8 or 8 x 4 diesel cab chassis Lifting Capacity Single fall rope Double fall rope 6 Tonne max capacity 10 Tonne max capacity Maximum Hook Height Single fall rope Double fall rope 16 Metres 10.6 Metres Maximum Outreach Boom horizontal 12.8 Meters Max Outreach Capacity 12.8 outreach - horizontal 1.4 Tonne Water Tank 500 Litre capacity 2 x 250
Boom Section Construction
Boom Elevation Above horizontal Below horizontal 74º -15º Slew
Speed
Litre separate compartments
High strength square section tube and fabrication Jib point.
360º Continuous Winch Make/Model Max line pull Max line pull
Infinitely
Motor Type Motor Make Drilling Torque Speed Drilling Radius
Digga Maximum Torque
speed: low speed
20
high speed
50 rpm Maximum Minimum 22,000 Nm 0-53 rpm 7.6 Metres 4.1 Metres Hole Depth (without extensions) Maximum 3.2 Metres Stabilisers
Borer
Epicyclic Direct Drive
2
-
rpm
-
4 x Hydraulically operated heavy duty out and down type capable of levelling the unit. 10º slopes. Self-levelling footplates. Optional 12 degrees.
Height 4200mm
Width 2500mm
Length 9300mm
Management
(typical) Overall
Overall
(typical)
Deck and Bolster
Standard
Hitch 50mm
Winches Pneumatic
MODEL 6/10 - 16 SERIES FORWARD MOUNT 10 9 8 7 6 6 5 4 3 2 1 10 9 8 7 6 5 4 2 3 1
ratchet type
ADDITIONAL OPTIONS
•
• Single or
•
AUGERS
• Various options available
• Various
POLE JACK KIT
20 Tonne
REAR ACCESS LADDER
STAFFA MOTOR
• 5 Piston or 7 piston
VARIOUS TOOL BOX OPTIONS
POLE GRAB ARMS
ATTACHMENT
types
FIBREGLASS JIB
DRIVERS SIDE TOOL OUTLET
COLLAPSIBLE DECK SAFETY HANDRAILS
RCI
3 Position outrigger detection or 5 position
HYDRAULICALLY OPERATED POLE CARRYING
double
VARIOUS TOW HITCH OPTION
Ozzy Cranes Manufacturing is one of Australia’s leading manufacturers specialising in Earth Boring / Pole Erecting truck mounted cranes designed and manufactured to meet the requirements of all electricity utilities and private contractors throughout Australia.
With designs tried and proven to withstand the test of time, and over 36 years of experience in the industry, Ozzy Cranes has gained a solid reputation for manufacturing equipment to the highest standards and to suit the harshest of Australian conditions with a strong commitment to satisfying our customers requirements.
We are able to offer the most extensive range of build configurations, models and options tailored to suit your individual needs.
Ozzy Cranes is a proudly Australian owned and operated company.
61-75
Quanda Rd, Coolum Beach QLD
4573
P 07 5471 7455 www.ozzycranes.com.au
