TIMco End User Brochure 2017 - Issue 4 by TIMco

SUPPLIER OF

SCREWS, FIXINGS, FASTENERS, P O W E R TO O L ACC E S S O R I E S A N D B U I L D E R S H A R D WA R E

2017

CONTENTS AND GUIDES

TIMBER CONSTRUCTION SCREWS

07 - 26

METAL CONSTRUCTION SCREWS

27 - 38

WINDOW FABRICATION SCREWS

39 - 44

NUTS, BOLTS, SETS AND WASHERS

45 - 56

FIXINGS AND FASTENERS

57 - 62

PLASTERBOARD SCREWS AND FIXINGS

63 - 70

CONCRETE AND MASONRY FIXINGS

71 - 86

COLLATED AND LOOSE NAILS

87 - 104

BUILDERS METAL WORK 105 - 118 DRILLING 119 - 140 CUTTING 141 - 160 DRIVER BITS 161 - 166 HAND TOOLS AND ACCESSORIES

167 - 170

TAPES AND SITE PROTECTION

171 - 176

DOOR ACCESSORIES 177 - 180 SECURITY SOLUTIONS

181 - 188 1

CONTENTS AND GUIDES

RECESS STYLES POZI / CROSS RECESS

TIM DRIVE RECESS

Standard recess for woodscrews, chipboard screws etc.

High performance recess on TIMco Multi-Fix and Velocity screws.

PHILLIPS RECESS

SQUARE RECESS / ROBERTSON DRIVE

Standard recess for self-drilling, drywall and window screws.

Recess on square drive pan self-drilling screws and solo screws.

COMBI RECESS A combination of a traditional slotted recess with a more common pozi recess.

HEAD TYPES COUNTERSUNK HEAD

BUGLE HEAD

Designed for countersinking into timber for a flush or recessed finish. May have ribs to assist countersinking.

A curved surface under the head to prevent damage or tearing to the plasterboard paper.

DOUBLE COUNTERSUNK

PAN / ROUND HEAD

Improved design on the countersunk head to give additional head strength and assist countersinking.

Head with a flat underside. Designed for application fixing against metal surfaces.

DOUBLE COUNTERSUNK WITH RIBS

WAFER / FLANGE HEAD

Ribs under head to assist with countersinking.

SHALLOW PAN COUNTERSUNK A special head designed to assist with clamping and countersinking.

Low profile head with a flat underside for applications where a large clamping area and an unobtrusive head is required.

HEXAGON HEAD Positive drive Hex Head with an integral washer to increase clamping effectiveness.

CONTENTS AND GUIDES SOCKET BUTTON HEAD

SOCKET CAP HEAD

Designed for a raised finish with a flat underside to aid clamping.

An industry standard, requiring a hex key to loosen or tighten.

THREAD TYPES COARSE THREAD (up to 16 TPI)

TWIN THREAD

Also know as spaced threads, they are normally used for all timber applications.

Also known as twin lead threads, they are designed to give a fast insertion time in soft material.

FINE THREAD (over 16 TPI)

HI-LO THREAD

Also known as metric threads, they are only used in steel applications. Fine threads are for use with thicker steels. (5 - 12mm thickness).

Used in soft timbers, plastics and into thin sheet sections. Hi-Lo threads have superior holding power compared to a low TPI coarse thread in these types of material.

SELF TAPPING THREAD

SERRATED THREAD

A common thread design mainly used in steel applications. (1-5mm)

The serrated or ‘wavy’ thread reduces the torque required to install the fastener as well assisting with the speed of insertion.

POINT STYLES NEEDLE / GIMLET AND SUPER SHARP POINT (SS) Designed for piercing timber, MDF, plastic and light gauge metal up to 0.6mm without pre-drilling.

SELF DRILL POINT For drilling into metals without the need for pre-drilling.

AB POINT

C2 SLASH

For use in pre-drilled sheet material applications.

Twin cut for rapid "pick up" and reduced splitting.

B POINT

TYPE 17 POINT

For use in pre-drilled shallow holes.

Also known as slash point, they are used for fixing timber without the need to pre-drill. The cutting edge helps reduces splitting of the timber.

CONTENTS AND GUIDES

GAUGE / DIAMETER

MEASURING LENGTH

The gauge of the screw is determined by the size of the outside thread diameter.

Fasteners with the following head types are measured from the underside of the head to the point of the screw:

Gauge 0g 1g 2g 3g 4g 5g 6g 7g 8g 9g 10g 12g 13g 14g 15g 16g 18g 20g 24g

Metric (mm)

1.5 1.9 2.25 2.5 3.0 3.3 3.5 3.9 4.2 4.5 4.8 5.5 6.1 6.3 6.5 6.8 7.5 8.1 9.4

THREAD LENGTH

PAN / ROUND

WAFER / FLANGE

HEXAGON

Fasteners with the following head types are measured from the top of the countersunk to the point of the screw:

COUNTERSUNK

DOUBLE CS

BUGLE

RAISED HEAD

DCS WITH RIBS

TPI - THREADS PER INCH The TPI is the number of thread crests that can be counted within 1â&#x20AC;? (25.4mm). The coarser the thread the faster the application time but the lower the holding power.

TPI

Drill Tip

CONTENTS AND GUIDES

METRIC/IMPERIAL SIZE COMPARISON CHART Listed beside the common imperial sizes are the metric equivalents. Also listed are common ‘even’ approximate metric equivalents in brackets. Imperial (inch)

Metric

Imperial (inch)

Metric

(mm)

1/64” 1/32” 3/64” 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4” 17/64” 9/32” 19/64” 5/16” 21/64” 11/32” 23/64” 3/8” 25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2” 17/32” 35/64” 9/16” 37/64” 19/32” 39/64” 5/8” 41/64” 21/32” 43/64” 11/16” 45/64” 23/32” 47/64” 3/4” 49/64” 25/32” 51/64”

0.40 0.79 1.19 1.59 1.98 2.38 2.78 3.17 (3.0) 3.5 3.97 (4.0) 4.5 4.76 (5.0) 5.16 5.5 5.95 6.35 (6.0) 6.75 7.14 7.54 7.94 (8.0) 8.33 8.73 9.13 9.52 (10.0) 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70 (13.0) 13.49 13.89 14.29 (14.0) 14.68 15.08 15.48 15.88 (16.0) 16.27 16.67 17.06 17.46 17.86 18.26 18.65 19.05 (19.0) 19.45 19.84 20.24

13/16” 53/64” 27/32” 55/64” 7/8” 57/64” 29/32” 59/64” 15/16” 61/64” 31/32” 63/64” 1” 1-1/16” 1-3/32” 1-1/8” 1-5/32” 1-3/16” 1-7/32” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/4” 2-1/2” 2-3/4” 3” 3-1/4” 3-1/2” 3-3/4” 4” 4-1/2” 5” 5-1/2” 6” 6-1/2” 7” 7-1/2” 8” 8-1/2” 9” 9-1/2” 10” 11” 12” 13” 14” 15” 16” 18”

20.64 21.03 21.43 21.83 22.23 (22.0) 22.62 23.02 23.42 23.81 24.21 24.61 25.00 25.40 (25.0) 26.99 27.78 28.58 (28.0) 29.37 30.16 (30.0) 30.96 31.75 (32.0) 38.10 (38.0) 45.45 (45.0) 50.80 (50.0) 57.15 (57.0) 63.50 (65.0) 69.85 (70.0) 76.20 (75.0) 82.55 (82.0) 88.90 (90.0) 95.25 (95.0) 101.60 (100) 114.30 (115) 127.00 (125) 139.70 (140) 152.40(150) 165.10 (165) 177.80 (175) 190.50 (190) 203.20 (200) 215.90 (215) 228.60 (230) 241.30 (240) 254.00 (250/255) 279.40 (280) 304.80 (305) 330.20 (330) 335.60 (350/355) 381.00 (380) 406.40 (400/405) 457.20 (455/460)

(mm)

CONTENTS AND GUIDES

PLATING & FINISH GUIDE YELLOW

EXTERIOR

Zinc electrolytic plating and yellow passivated after treatment for enhanced corrosion. ZINC

A bright Zinc electrolytic plating with a clear toxin free finish. Complies with restrictions of hazardous substances in electrical/electronic equipment (ROHS) directive (2002/95/EC). BLACK

A zinc electrolytic plating with a black passivation after treatment to enhance corrosion resistance. NICKEL

An electroplated, high lustre, corrosion resistant finish

BRIGHT

A superior organic finish which is environmentally friendly and offers excellent resistance to corrosion in outdoor applications. Exterior includes; nano technology, silver ruspert, green and brown finishes. A2 STAINLESS STEEL

A non-magnetic austenitic steel suitable for many day to day external or corrosive applications offering an excellent resistance to corrosion. A4 STAINLESS STEEL

Similar to the A2 SS but more suitable for extremely corrosive applications, including marine environments. MART. STAINLESS STEEL + RUSP

A magnetic, martensitic stainless steel with moderate heat resistance, with silver ruspert plating.

Polished only. SHERARDISED

A dry galvanised, zinc bonded plating. GALVANISED

Electro-galvanic plating applied to the product. FIRMAGALV

A electro-galvanic plating. FIRMAGALV +

Similar to the electro-galvanic plating on FirmaGalv. This plating provides better corrosion resistance. HOT DIPPED

A galvanised zinc plating which gives excellent corrosion resistance.

APPLICATION GUIDE

HARDWOOD

SOFTWOOD

CHIPBOARD

MDF

WOOD PANEL

PLASTIC

PLASTERBOARD

BRICK

CONCRETE

STONE

HOLLOW BLOCK

BLOCK

REINFORCED CONCRETE

HARD CONCRETE

CONCRETE (15-30)

KERBS/SLABS

CONCRETE PAVIORS

VITRIFIED CLAY PRODUCTS

SOFT CLAY

ENGINEERING BRICK

MEDIUM FACING BRICKS

SOFT FACING BRICK

CLAY PAVIORS

HARD SANDSTONE

SANDSTONE

CONCRETE ROOFING TILES

HARD SLATE

CLAY ROOF TILES

CERAMIC TILE

GLASS

MARBLE

PORCELAIN

DAMP/WET HOLES

UNDERWATER

LOW VENTILATION

HEAVY DUTY FIXING

REBAR

STEEL

ALUMINIUM

NONFERROUS METAL

STAINLESS STEEL

CAST IRON

THIN SHEET METAL

TIMBER CONSTRUCTION SCREWS 08 - VELOCITY 09 - C2 ADVANCED SCREWS 12 - CLASSIC MULTI-PURPOSE SCREWS 16 - SOLO SCREWS 18 - TWIN-THREADED SCREWS 19 - BLACKJAX 20 - MIRROR SCREWS 20 - CARCASS SCREWS 20 - SCREW CAPS 21 - MIXED TRAYS & PACKS 22 - DECKING SCREWS 23 - TIMBER SCREWS 26 - COACH SCREWS

TIMBER CONSTRUCTION SCREWS

VELOCITY

VELOCITY®

Materials

Premium multi-use screw YELLOW

Available in:

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials whilst achieving exceptional pull out resistance. Designed to give the user a consistent and reliable product that can be used in a variety of applications.

VELOCITY® -

YELLOW

Double Countersunk Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 16 3.0 x 20 3.0 x 30 3.0 x 40 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 45 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 30 4.5 x 40 4.5 x 50

4 x 5/8 4 x 3/4 4 x 11/4 4 x 11/2 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6 x 13/4 6x2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/4 9 x 11/2 9x2

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Product Code

Boxes

Size (Metric)

Size (Imp. equiv.)

Qty

45060VY 45070VY 45080VY 50030VY 50040VY 50045VY 50050VY 50060VY 50070VY 50075VY 50080VY 50090VY 50100VY 60040VY 60045VY 60050VY 60060VY 60070VY 60080VY 60090VY 60100VY 60120VY 60130VY 60150VY 60180VY 60200VY

4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 45 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200

9 x 21/2 9 x 23/4 9x3 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 13/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 4 12 x 51/8 12 x 6 12 x 71/4 12 x 8

200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 200 100 100 100 100 100 100 100

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Boxes

30016VY 30020VY 30030VY 30040VY 35012VY 35016VY 35020VY 35025VY 35030VY 35035VY 35040VY 35045VY 35050VY 40016VY 40020VY 40025VY 40030VY 40035VY 40040VY 40045VY 40050VY 40060VY 40070VY 40080VY 45030VY 45040VY 45050VY

VELOCITY® - TIMDRIVE -

YELLOW

Double Countersunk Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Boxes (Driver bit included) 50050VYTX 50060VYTX 50070VYTX 50080VYTX 50100VYTX 60080VYTX 60100VYTX 60120VYTX

5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 100 6.0 x 120

10 x 2 10 x 2½ 10 x 2¾ 10 x 3 10 x 4 12 x 3 12 x 4 12 x 4¾

Boxes (Driver bit included) 200 200 200 200 100 200 100 100

60150VYTX 60180VYTX 60200VYTX 80200VYTX 80225VYTX 80250VYTX 80275VYTX 80300VYTX

6.0 x 150 6.0 x 180 6.0 x 200 8.0 x 200 8.0 x 225 8.0 x 250 8.0 x 275 8.0 x 300

12 x 6 12 x 7¼ 12 x 8 16 x 8 16 x 9 16 x 10 16 x 107/8 16 x 12

100 100 100 50 50 50 25 25

C2 MULTI-PURPOSE

TIMBER CONSTRUCTION SCREWS

C2® MULTI-PURPOSE

Materials

Advanced screw Available in:

YELLOW

The C2 has been re-engineered around the backbone of the Classic, one of Europe’s largest selling multi-purpose screws. Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Note: Partially threaded from 80mm.

C2® MULTI-PURPOSE -

YELLOW

Double Countersunk with ribs Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (V5 bit included) 35025C2TUB 35030C2TUB 40025C2TUB 40030C2TUB 40040C2TUB 40050C2TUB 40060C2TUB 40070C2TUB 40080C2TUB 50040C2TUB 50050C2TUB 50060C2TUB 50070C2TUB 50080C2TUB 50090C2TUB 50100C2TUB 60100C2TUB

Size (Metric)

Size (Imp. equiv.)

Qty

5.0 x 90 5.0 x 100 5.0 x 120 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200

10 x 31/2 10 x 4 10 x 43/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6 12 x 71/4 12 x 8

100 100 100 200 200 200 200 100 100 100 100 100 100 100

Boxes

3.5 x 25 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 100

6x1 6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8 x 23/4 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 10 x 4

2,000 1,800 1,700 1,500 1,200 800 600 500 400 800 600 400 375 350 300 300 225

3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 50 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80

4 x 1/2 4 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 11/2 6x2 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/4 9 x 11/2 9x2 9 x 21/2 9 x 23/4 9x3 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Boxes 35012C2 35016C2 35020C2 35025C2 35030C2 35040C2 35050C2 40025C2 40030C2 40035C2 40040C2 40045C2 40050C2 40060C2 40070C2 40080C2 45030C2 45040C2 45050C2 45060C2 45070C2 45080C2 50030C2 50040C2 50045C2 50050C2 50060C2 50070C2 50075C2 50080C2

Product Code

50090C2 50100C2 50120C2 60050C2 60060C2 60070C2 60080C2 60090C2 60100C2 60120C2 60130C2 60150C2 60180C2 60200C2

C2® TRADE CASE A strong metal case containing nine of the most popular C2 Screws and five V5 impact driver bits.

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Trade Case - Qty 1,800

C2SC

3.5 x 16 6 x 5/8 3.5 x 25 6x1 4.0 x 30 8 x 11/4 4.0 x 40 8 x 11/2 4.0 x 50 8x2 5.0 x 60 10 x 21/2 5.0 x 70 10 x 23/4 5.0 x 80 10 x 3 5.0 x 100 10 x 4 V5 Impact Driver Bits

480 350 250 350 100 65 55 100 45 5

TIMBER CONSTRUCTION SCREWS

C2 ADVANCED SCREWS

C2速 MULTI-PURPOSE ZINC

Materials

Advanced screw Available in:

ZINC

C2速 ZINC Double Countersunk with ribs Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (V5 bit included) 40030C2ZTUB 40040C2ZTUB 40050C2ZTUB 40060C2ZTUB 40080C2ZTUB

4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (V5 bit included) 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3

1,500 1,200 800 600 400

C2速 EXTERIOR

50050C2ZTUB 50060C2ZTUB 50070C2ZTUB 50080C2ZTUB 50100C2ZTUB

5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

600 400 375 350 300

Materials

Twin cut exterior screw Available in: EXTERIOR

The C2 Exterior screw has been plated with a multi-layer protection system that consists of an organic top coat barrier and a zinc base layer. Designed to provide excellent additional protection against corrosion in exterior applications.

C2速 EXTERIOR Double Countersunk with ribs Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (V5 impact bit included) 40030C2S 40040C2S 40050C2S 40060C2S 40070C2S 50050C2S 50060C2S 50070C2S 50080C2S 50100C2S

4.0 X 30 4.0 X 40 4.0 X 50 4.0 X 60 4.0 X 70 5.0 X 50 5.0 X 60 5.0 X 70 5.0 X 80 5.0 X 100

8 x 11/4 8 x 11/2 8x2 8 x 21/2 8 x 23/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

400 350 300 200 170 180 150 120 110 80

C2 ADVANCED SCREWS

TIMBER CONSTRUCTION SCREWS

C2® FLOORING & MDF

Materials

Twin cut flooring screw Available in:

YELLOW

C2® FLOORING & MDF For use in man made boards such as MDF and chipboard. The C2 twin-cuts ensure a rapid pickup and reduces the likelihood of splitting whilst the steep head design with self countersinking ribs ensures a flush finish. The plain shank enables the screw to pull the two substrates together with out the need to manually clamp.

Double Countersunk with ribs Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (T20 driver bit included) 42055C2MDF

4.2 x 55

C2® TONGUE-FIX

8 x 21/4

250

Materials

Tongue and groove flooring Available in:

YELLOW

C2® TONGUE-FIX Double Countersunk with ribs Specifically designed for attaching tongue and groove floorboards to flooring joists. The C2 TongueFix gives a secure hidden fixture through the tongue without causing damage, allowing a flush fit with the next board.

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs (T10 driver bit included) 35045C2TG

3.5 x 45

C2® DECKING

6 x 13/4

350

Materials

For decking platforms Available in: EXTERIOR

C2® DECKING SCREW

An innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Product Code

Size (mm)

Size (Imp. equiv.)

Qty

Tubs (T20 driver bit included) 50C2D250 65C2D250 75C2D250 65C2D1000

4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 65

9x2 9 x 21/2 9 x 27/8 9 x 21/2

Double Countersunk with ribs Product Code

Size (mm)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 65 4.5 x 75

9x2 9 x 21/2 9 x 27/8

175 145 120

Bags 250 250 250 1000

50C2DB 65C2DB 75C2DB

TIMBER CONSTRUCTION SCREWS

CLASSIC MULTI-PURPOSE SCREWS

CLASSIC

Materials

Single cut multi-purpose screw Available in:

YELLOW

ZINC

NICKEL

BLACK

A2 SS

Specifically designed as a multi-purpose product, the 25Â° sharp point, the new type 17 slash, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently, whilst offering exceptional holding power. Note: Partially threaded from 80mm.

CLASSIC -

MIXED PACKS OF ASSORTED SIZES

PAGE 21

YELLOW

Double Countersunk

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.0 x 30 3.0 x 35 3.0 x 40 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 45 3.5 x 50 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60

4 x 1/2 4 x 5/8 4 x 3/4 4x1 4 x 11/4 4 x 13/8 4 x 11/2 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6 x 13/4 6x2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 23/8 8 x 21/2

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Boxes 30012CLAF 30016CLAF 30020CLAF 30025CLAF 30030CLAF 30035CLAF 30040CLAF 35012CLAF 35016CLAF 35020CLAF 35025CLAF 35030CLAF 35035CLAF 35040CLAF 35045CLAF 35050CLAF 40012CLAF 40016CLAF 40020CLAF 40025CLAF 40030CLAF 40035CLAF 40040CLAF 40045CLAF 40050CLAF 40055CLAF 40060CLAF

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

40070CLAF 40080CLAF 45016CLAF 45020CLAF 45025CLAF 45030CLAF 45035CLAF 45040CLAF 45045CLAF 45050CLAF 45055CLAF 45060CLAF 45070CLAF 45080CLAF 50020CLAF 50025CLAF 50030CLAF 50035CLAF 50040CLAF 50045CLAF 50050CLAF 50055CLAF 50060CLAF 50070CLAF 50075CLAF 50080CLAF 50090CLAF 50100CLAF 50120CLAF 60040CLAF 60045CLAF 60050CLAF 60060CLAF 60070CLAF 60080CLAF 60090CLAF 60100CLAF 60120CLAF 60130CLAF 60150CLAF 60180CLAF 60200CLAF

4.0 x 70 4.0 x 80 4.5 x 16 4.5 x 20 4.5 x 25 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45 4.5 x 50 4.5 x 55 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 55 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 5.0 x 120 6.0 x 40 6.0 x 45 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150 6.0 x 180 6.0 x 200

8 x 23/4 8x3 9 x 5/8 9 x 3/4 9x1 9 x 11/4 9 x 13/8 9 x 11/2 9 x 13/4 9x2 9 x 23/8 9 x 21/2 9 x 23/4 9x3 10 x 3/4 10 x 1 10 x 11/4 10 x 13/8 10 x 11/2 10 x 13/4 10 x 2 10 x 23/8 10 x 21/2 10 x 23/4 10 x 27/8 10 x 3 10 x 31/2 10 x 4 10 x 43/4 12 x 11/2 12 x 13/4 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6 12 x 71/4 12 x 8

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 200 200 200 200 200 200 100 100 100 100 100 100 100

CLASSIC MULTI-PURPOSE SCREWS

PAN HEAD -

TIMBER CONSTRUCTION SCREWS

CLASSIC -

YELLOW

ZINC

Double Countersunk

The Classic multi-purpose screw with pan head for extra clamping.

The Classic multi-purpose screw plated in zinc.

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 5.0 x 30 5.0 x 50

6 x 1/2 6 x 5/8 6 x 3/4 6x1 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8x2 10 x 11/4 10 x 2

200 200 200 200 200 200 200 200 200 200 200 200 200

Boxes

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 X 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60 4.0 x 70 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 70 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 70 6.0 x 80 6.0 x 100

4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 3/4 8X1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 23/8 8 x 21/2 8 x 23/4 9 x 11/4 9 x 11/2 9x2 9 x 23/4 10 x 1 10 x 11/4 10 x 13/8 10 x 1 1/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 2 12 x 23/4 12 x 3 12 x 4

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 100

Boxes

35012CLAP 35016CLAP 35020CLAP 35025CLAP 40016CLAP 40020CLAP 40025CLAP 40030CLAP 40035CLAP 40040CLAP 40050CLAP 50030CLAP 50050CLAP

CLASSIC HINGE SCREW Classic multi-purpose screw with a reduced 5mm head for specific use in continuous/piano hinges.

HINGE SCREW -

YELLOW

5mm Reduced Head

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25

4 x 1/2 4 x 5/8 4 x 3/4 4x1

200 200 200 200

Boxes 30012CLAH 30016CLAH 30020CLAH 30025CLAH

HINGE SCREW -

NICKEL

5mm Reduced Head

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20

4 x 1/2 4 x 5/8 4 x 3/4

200 200 200

30012CLAZ 30016CLAZ 30020CLAZ 30025CLAZ 35012CLAZ 35016CLAZ 35020CLAZ 35025CLAZ 35030CLAZ 35035CLAZ 35040CLAZ 35050CLAZ 40016CLAZ 40020CLAZ 40025CLAZ 40030CLAZ 40035CLAZ 40040CLAZ 40045CLAZ 40050CLAZ 40055CLAZ 40060CLAZ 40070CLAZ 45030CLAZ 45040CLAZ 45050CLAZ 45070CLAZ 50025CLAZ 50030CLAZ 50035CLAZ 50040CLAZ 50050CLAZ 50060CLAZ 50070CLAZ 50080CLAZ 50090CLAZ 50100CLAZ 60040CLAZ 60050CLAZ 60070CLAZ 60080CLAZ 60100CLAZ

Boxes 30012CLAHN 30016CLAHN 30020CLAHN

TIMBER CONSTRUCTION SCREWS

CLASSIC -

A2 SS

CLASSIC MULTI-PURPOSE SCREWS

Product Code

Double Countersunk

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

30 25 20 15 14 10 8 7 6 4

Packs

The Classic multi-purpose screw in stainless steel for added corrosion resistance. Product Code

COLLATED SIZES AVAILABLE ON

PAGE 67

Size (Metric)

Size (Imp. equiv.)

Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 25 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 100 6.0 x 130 6.0 x 150

4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 3/8 6 x 1 1/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8 x 1 3/4 8x2 8 x 2 1/2 8 x 2 3/4 9 x 5/8 9 x 1 1/4 9 x 1 1/2 9x2 9 x 2 1/2 10 x 1 10 x 1 1/4 10 x 1 3/8 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 3 1/2 10 x 4 12 x 1 1/2 12 x 2 12 x 2 1/2 12 x 2 3/4 12 x 3 12 x 4 12 x 5 12 x 6

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100

35030CHSSP 40025CHSSP 40030CHSSP 40040CHSSP 40050CHSSP 50050CHSSP 50060CHSSP 50070CHSSP 50080CHSSP 50100CHSSP

Boxes 30012CLASS 30016CLASS 30020CLASS 30025CLASS 35012CLASS 35016CLASS 35020CLASS 35025CLASS 35030CLASS 35035CLASS 35040CLASS 35050CLASS 40016CLASS 40020CLASS 40025CLASS 40030CLASS 40035CLASS 40040CLASS 40045CLASS 40050CLASS 40060CLASS 40070CLASS 45025CLASS 45030CLASS 45040CLASS 45050CLASS 45060CLASS 50025CLASS 50030CLASS 50035CLASS 50040CLASS 50050CLASS 50060CLASS 50070CLASS 50080CLASS 50090CLASS 50100CLASS 60040CLASS 60050CLASS 60060CLASS 60070CLASS 60080CLASS 60100CLASS 60130CLASS 60150CLASS

CLASSIC -

BLACK

Double Countersunk

The Classic multi-purpose screw in black passivated. Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 16 3.5 x 25 4.0 x 25 4.0 x 30 4.0 x 40 4.5 x 30 5.0 x 30 5.0 x 40

6 x 5/8 6x1 8x1 8 x 11/4 8 x 11/2 9 x 11/4 10 x 11/4 10 x 11/2

200 200 200 200 200 200 200 200

Boxes 35016CLAB 35025CLAB 40025CLAB 40030CLAB 40040CLAB 45030CLAB 50030CLAB 50040CLAB

CLASSIC DECKING / RAINWATER SCREWS

TIMBER CONSTRUCTION SCREWS

CLASSIC DECKING SCREW

Materials

Single cut multi-purpose screw Available in:

A2 SS

Used for attaching decking board to a timber substrate. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications.

CLASSIC DECKING SCREW - Double Countersunk

A2 SS

Product Code

Size (mm)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 65

9x2 9 x 21/2

250 250

Tubs 50DEXSS250 65DEXSS250

CLASSIC RAINWATER SCREW

Materials

Installation of PVCu rainwater systems WHITE

BLACK

Available in:

Specially designed for the fitting of brackets and clips during installation of PVCu rainwater systems. When fixing into brick, a brown (6mm) or red (5mm) plug is needed.

BLACK SCREW BLACK

Product Code

WHITE SCREW

- Single Slash

Size (mm)

Size (Imp. equiv.)

WHITE

Qty

Tubs ( No.2 Pozi driver bit included) 50025CLARB 60040CLARB

5.0 x 25 6.0 x 40

10 x 1 12 x 11/2

400 200

Product Code

- Single Slash

Size (mm)

Size (Imp. equiv.)

Qty

Tubs ( No.2 Pozi driver bit included) 50025CLARW 60040CLARW

5.0 x 25 6.0 x 40

10 x 1 12 x 11/2

400 200

TIMBER CONSTRUCTION SCREWS

SOLO CHIPBAORD SCREWS

SOLO

Materials

Single threaded woodscrew Available in:

YELLOW

ZINC

MIXED PACKS OF ASSORTED SIZES

PAGE 21

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with a plastic plug.

SOLO -

COLLATED BOXES AVAILABLE ON

PAGE 67

YELLOW

Double Countersunk Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

Tubs 35025STUBY 35030STUBY 40025STUBY 40030STUBY 40040STUBY 40050STUBY 50040STUBY 50050STUBY 50060STUBY 50070STUBY 50080STUBY 50100STUBY

3.5 x 25 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

6x1 6 x 11/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 11/2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

2,000 1,800 1,700 1,250 1,000 800 800 525 400 375 325 250

3.0 x 12 3.0 x 15 3.0 x 17 3.0 x 20 3.0 x 25 3.0 x 30 3.5 x 12 3.5 x 15 3.5 x 17 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 15 4.0 x 17 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 20 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45

4 x 1/2 4 x 5/8 4 x 43/64 4 x 3/4 4x1 4 x 11/4 6 x 1/2 6 x 5/8 6 x 43/64 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 43/64 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4 8x2 8 x 21/2 8 x 23/4 9 x 3/4 9 x 11/4 9 x 13/8 9 x 11/2 9 x 13/4

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Boxes 30012SOLOC 30015SOLOC 30017SOLOC 30020SOLOC 30025SOLOC 30030SOLOC 35012SOLOC 35015SOLOC 35017SOLOC 35020SOLOC 35025SOLOC 35030SOLOC 35035SOLOC 35040SOLOC 35050SOLOC 40015SOLOC 40017SOLOC 40020SOLOC 40025SOLOC 40030SOLOC 40035SOLOC 40040SOLOC 40045SOLOC 40050SOLOC 40060SOLOC 40070SOLOC 45020SOLOC 45030SOLOC 45035SOLOC 45040SOLOC 45045SOLOC

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

45050SOLOC 45060SOLOC 45070SOLOC 45080SOLOC 50025SOLOC 50030SOLOC 50035SOLOC 50040SOLOC 50045SOLOC 50050SOLOC 50060SOLOC 50070SOLOC 50075SOLOC 50080SOLOC 50090SOLOC 50100SOLOC 60040SOLOC 60050SOLOC 60060SOLOC 60070SOLOC 60080SOLOC 60090SOLOC 60100SOLOC 60120SOLOC 60130SOLOC 60150SOLOC

4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 75 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 90 6.0 x 100 6.0 x 120 6.0 x 130 6.0 x 150

9x2 9 x 21/2 9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 13/8 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 3 10 x 31/2 10 x 4 12 x 11/2 12 x 2 12 x 21/2 12 x 23/4 12 x 3 12 x 31/2 12 x 4 12 x 43/4 12 x 51/8 12 x 6

200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100 100 100

3.5 x 15 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 4.0 x 60 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 120 6.0 x 150

6 x 5/8 6 x 1 1/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8x2 8 x 2 1/2 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 4 12 x 3 12 x 4 3/4 12 x 6

750 500 470 430 380 350 280 230 230 180 160 140 120 90 90 50 35

Bags 35015CHYB 35030CHYB 40025CHYB 40030CHYB 40035CHYB 40040CHYB 40050CHYB 40060CHYB 50040CHYB 50050CHYB 50060CHYB 50070CHYB 50080CHYB 50100CHYB 60080CHYB 60120CHYB 60150CHYB

SOLO CHIPBAORD SCREWS

SOLO -

YELLOW

Double Countersunk

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

3.5 x 15 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 50 4.0 x 60 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100 6.0 x 80 6.0 x 120 6.0 x 150

6 x 5/8 6 x 1 1/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8x2 8 x 2 1/2 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 4 12 x 3 12 x 4 3/4 12 x 6

45 35 30 25 22 20 16 12 10 12 10 8 6 4 4 2 2

Packs 35015CHYP 35030CHYP 40025CHYP 40030CHYP 40035CHYP 40040CHYP 40050CHYP 40060CHYP 50040CHYP 50050CHYP 50060CHYP 50070CHYP 50080CHYP 50100CHYP 60080CHYP 60120CHYP 60150CHYP

SOLO -

TIMBER CONSTRUCTION SCREWS

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

40050SOLOZ 40060SOLOZ 40070SOLOZ 40080SOLOZ 45040SOLOZ 45050SOLOZ 45060SOLOZ 45070SOLOZ 45080SOLOZ 50025SOLOZ 50030SOLOZ 50040SOLOZ 50045SOLOZ 50050SOLOZ 50060SOLOZ 50070SOLOZ 50080SOLOZ 50090SOLOZ 50100SOLOZ 60050SOLOZ 60060SOLOZ 60080SOLOZ 60100SOLOZ 60120SOLOZ 60150SOLOZ

4.0 x 50 4.0 x 60 4.0 x 70 4.0 x 80 4.5 x 40 4.5 x 50 4.5 x 60 4.5 x 70 4.5 x 80 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 50 6.0 x 60 6.0 x 80 6.0 x 100 6.0 x 120 6.0 x 150

8x2 8 x 21/2 8 x 23/4 8x3 9 x 11/2 9x2 9 x 21/2 9 x 23/4 9x3 10 x 1 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 31/2 10 x 4 12 x 2 12 x 21/2 12 x 3 12 x 43/4 12 x 51/8 12 x 6

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 100 100 100

SQUARE RECESS -

ZINC

Double Countersunk

ZINC

Double Countersunk

Product Code

Size (Metric)

Size (Imp. equiv.)

Product Code Qty

Tubs 40030STUBZ 40040STUBZ 40050STUBZ 50050STUBZ 50060STUBZ 50070STUBZ 50080STUBZ 50100STUBZ

4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

8 x 11/4 8 x 11/2 8x2 10 x 2 10 x 21/2 10 x 23/4 10 x 3 10 x 4

1,250 1,000 800 525 400 375 325 250

3.0 x 12 3.0 x 15 3.5 x 15 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 15 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45

4 x 1/2 4 x 5/8 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 13/8 6 x 11/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 13/8 8 x 11/2 8 x 13/4

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Size (Imp. equiv.)

Qty

4.0 x 20 4.0 x 25 4.0 x 40 5.0 x 40 5.0 x 50 5.0 x 80

8 x 3/4 8x1 8 x 11/2 10 x 11/2 10 x 2 10 x 3

200 200 200 200 200 200

Boxes 40020SQSZ 40025SQSZ 40040SQSZ 50040SQSZ 50050SQSZ 50080SQSZ

PAN - SQUARE -

Boxes 30012SOLOZ 30015SOLOZ 35015SOLOZ 35020SOLOZ 35025SOLOZ 35030SOLOZ 35035SOLOZ 35040SOLOZ 35050SOLOZ 40015SOLOZ 40020SOLOZ 40025SOLOZ 40030SOLOZ 40035SOLOZ 40040SOLOZ 40045SOLOZ

Size (Metric)

ZINC

Pan Head

Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

4.0 x 20 4.0 x 25 4.0 x 40 5.0 x 40

8 x 3/4 8x1 8 x 11/2 10 x 11/2

200 200 200 200

Boxes 40020SQPSZ 40025SQPSZ 40040SQPSZ 50040SQPSZ

TIMBER CONSTRUCTION SCREWS

TWIN-THREADED SCREWS

TWIN-THREADED

Materials

Woodscrew Available in:

ZINC

MIXED PACKS OF ASSORTED SIZES

PAGE 21

A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or into masonry with a plastic plug.

TWIN-THREADED Double Countersunk Product Code

Size (Imp.)

Size (Metric)

Qty

4 x 1/2 4 x 5/8 4 x 3/4 4x1 5 x 5/8 5 x 3/4 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 1/2 6 x 1 3/4 6x2 7 x 5/8 7 x 3/4 7x1 7 x 11/4 7 x 11/2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8 x 13/4 8x2 8 x 21/4 8 x 21/2 8x3 8x3 10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 13/4 10 x 2 10 x 21/4 10 x 21/2 10 x 3 10 x 3 10 x 31/2

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.3 x 16 3.3 x 19 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 45 3.5 x 50 3.9 x 16 3.9 x 20 3.9 x 25 3.9 x 30 3.9 x 40 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 55 4.0 x 60 4.0 x 75 4.0 x 75 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 55 5.0 x 60 5.0 x 75 5.0 x 75 5.0 x 90

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 200 200 200 200 200 200 200 100 100

Boxes 00412CWZ 00458CWZ 00434CWZ 00041CWZ 00558CWZ 00534CWZ 00612CWZ 00658CWZ 00634CWZ 00061CWZ 06114CWZ 06112CWZ 06134CWZ 00062CWZ 00758CWZ 00734CWZ 00071CWZ 07114CWZ 07112CWZ 00812CWZ 00858CWZ 00834CWZ 00081CWZ 08114CWZ 08112CWZ 08134CWZ 00082CWZ 08214CWZ 08212CWZ 00083CWZ 00083CWZ100 01034CWZ 00101CWZ 10114CWZ 10112CWZ 10134CWZ 00102CWZ 10214CWZ 10212CWZ 00103CWZ 00103CWZ100 10312CWZ

Product Code 00104CWZ 00121CWZ 12114CWZ 12112CWZ 00122CWZ 12212CWZ 00123CWZ 00123CWZ100 12312CWZ 00124CWZ

Size (Imp.)

Size (Metric)

Qty

10 x 4 12 x 1 12 x 11/4 12 x 11/2 12 x 2 12 x 21/2 12 x 3 12 x 3 12 x 31/2 12 x 4

5.0 x 100 6.0 x 25 6.0 x 30 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 75 6.0 x 75 6.0 x 90 6.0 x 100

100 200 200 200 200 200 200 100 100 100

6 x 5/8 6 x 3/4 6x1 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 3 10 x 4

3.5 x 15 3.5 x 20 3.5 x 25 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 80 5.0 x 100

700 620 500 540 470 390 350 270 200 180 250 190 160 140 90

6 x 5/8 6 x 3/4 6x1 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 8x3 10 x 11/2 10 x 2 10 x 21/2 10 x 3 10 x 4

3.5 x 15 3.5 x 20 3.5 x 25 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 4.0 x 80 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 80 5.0 x 100

45 40 35 35 30 25 20 16 12 10 15 12 10 8 6

Bags 00658CWZB 00634CWZB 00061CWZB 00834CWZB 00081CWZB 08114CWZB 08112CWZB 00082CWZB 08212CWZB 00083CWZB 10112CWZB 00102CWZB 10212CWZB 00103CWZB 00104CWZB

Packs 00658CWZP 00634CWZP 00061CWZP 00834CWZP 00081CWZP 08114CWZP 08112CWZP 00082CWZP 08212CWZP 00083CWZP 10112CWZP 00102CWZP 10212CWZP 00103CWZP 00104CWZP

TWIN-THREADED SCREWS

TIMBER CONSTRUCTION SCREWS

ROUNDHEAD TWIN-THREADED

Materials

Woodscrew Available in:

ZINC

A traditional sharp point screw with a twin-thread for a fast installation, mainly used in soft timber applications or into masonry with a plastic plug.

TWIN-THREADED Roundhead Product Code

Size (Imp.)

Size (Metric)

Qty

Product Code

4 x 1/2 4 x 5/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 8 x 1/2 8 x 5/8 8 x 3/4 8x1

3.0 x 12 3.0 x 16 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 4.0 x 12 4.0 x 16 4.0 x 20 4.0 x 25

200 200 200 200 200 200 200 200 200 200 200

08114CRWZ 08112CRWZ 00082CRWZ 00101CRWZ 10114CRWZ 10112CRWZ 00102CRWZ 10212CRWZ 00103CRWZ 12112CRWZ 00122CRWZ

Boxes

Size (Imp.)

Size (Metric)

Qty

8 x 11/4 8 x 11/2 8x2 10 x 1 10 x 11/4 10 x 11/2 10 x 2 10 x 21/2 10 x 3 12 x 11/2 12 x 2

4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 75 6.0 x 40 6.0 x 50

200 200 200 200 200 200 200 200 200 200 200

Boxes

00412CRWZ 00458CRWZ 00612CRWZ 00658CRWZ 00634CRWZ 00061CRWZ 06114CRWZ 00812CRWZ 00858CRWZ 00834CRWZ 00081CRWZ

BLACKJAX

Materials

Roundhead woodscrew Available in:

BLACK

A twin-threaded wood screw with a black japanned finish designed to be used with black ironmongery.

BLACKJAX Roundhead Product Code

Size (Imp.)

Size (Metric)

Qty

6 x 5/8 6 x 3/4 6x1 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 1 10 x 11/4 10 x 11/2 10 x 2

3.5 x 16 3.5 x 20 3.5 x 25 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50

200 200 200 200 200 200 200 200 200 200 200 200 200

Boxes 00658BJC 00634BJC 00061BJC 00858BJC 00834BJC 00081BJC 08114BJC 08112BJC 00082BJC 00101BJC 10114BJC 10112BJC 00102BJC

Product Code

Size (Imp.)

Size (Metric)

Qty

6x1 8x1 8 x 1 1/2 10 x 1 1/2

3.5 x 25 4.0 x 25 4.0 x 40 5.0 x 40

45 40 35 35

Packs 00061BJCP 00081BJCP 08112BJCP 10112BJCP

TIMBER CONSTRUCTION SCREWS

SPECIALIST SCREWS AND COVER CAPS

CARCASS SCREW

Materials

Woodscrew Available in:

BLACK

Designed for construction of furniture carcasses.

CARCASS SCREWS Countersunk Product Code

Size (Metric)

Size (Imp. equiv.)

Qty

4.0 x 33 4.0 x 45

7 x 11/4 7 x 13/4

500 500

Boxes 40033CARC 40045CARC

TWO PIECE COVER CAPS

MIRROR SCREW Dome head

Two piece cap and washer which provides a decorative finish and a protective cap.

For hanging a mirror where an aesthetic finish is required. Product Code

Screw Size (Imp.)

Finish

Qty

Packs 08114CMIRP 08112CMIRP

8 x 11/4 8 x 11/2

Chrome Chrome

10 8

8x1 8 x 11/4 8 x 11/2 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2

Chrome Chrome Chrome Polished Brass Polished Brass Polished Brass Polished Brass Polished Brass

200 200 200 200 200 200 200 200

Boxes 00081CMIR200 08114CMIR200 08112CMIR200 00834BMIR200 00081BMIR200 08114BMIR200 08112BMIR200 00082BMIR200

HINGED COVER CAPS

Finish

Qty

3.5 - 4.2 3.5 - 4.2 3.5 - 4.2 3.5 - 4.2

White Chrome Brown Black

100 100 100 100

SCREW CUPS A surface screw cup designed to allow the head of the screw to sit proud giving a decorative finish.

To Fit (mm)

Finish

Qty

6 8 10 6 8 10

Brass Brass Brass Nickel Nickel Nickel

60 55 50 60 55 50

Packs

To Fit (mm)

Colour

Qty

3.5 - 5.0 3.5 - 5.0 5.0 - 10.0 5.0 - 10.0

White Black White Black

100 100 50 50

Bags SHCCBLACKP LHCCWHITEP LHCCBLACKP

To Fit (mm)

Bags WHITEPLAST CHROMEPLAST BROWNPLAST BLACKPLAST

Product Code

For cosmetic use to conceal screws. Product Code

Product Code

6BCUPP 8BCUPP 10BCUPP 6NCUPP 8NCUPP 10NCUPP

MIXED SCREW TRAYS AND PACKS

TIMBER CONSTRUCTION SCREWS

MIXED TRAYS - ASSORTED SIZES

Classic / Twin-Threaded / Self-Tapping Product Code

Description

Qty

CLASSIC TRAY Classic Yellow STST TRAY Classic A2 Stainless Steel WOOD TRAY Zinc Twin-Threaded STS TRAY Zinc Self-Tapper

895

pcs

1140

pcs

Classic® A2 SS

3.5 x 16mm

4.0 x 40mm

3.5 x 16mm

4.0 x 40mm

8 x 11/4

6 x 1/2

200 pcs

70 pcs

200 pcs

70 pcs

85 pcs

180 pcs

3.5 x 25mm

4.0 x 50mm

3.5 x 25mm

4.0 x 50mm

6 x 3/4

8 x 11/2

100 pcs

60 pcs

100 pcs

60 pcs

130 pcs

65 pcs

3.5 x 30mm

4.0 x 60mm

3.5 x 30mm

4.0 x 60mm

100 pcs

50 pcs

100 pcs

50 pcs

4.0 x 20mm

5.0 x 40mm

4.0 x 20mm

5.0 x 40mm

30 pcs

100 pcs

30 pcs

4.0 x 25mm

5.0 x 50mm

4.0 x 25mm

5.0 x 50mm

10 x 21/2

6 x 1/2

60 pcs

40 pcs

60 pcs

40 pcs

35 pcs

190 pcs

4.0 x 30mm

5.0 x 60mm

4.0 x 30mm

5.0 x 60mm

8x1

8x2

50 pcs

35 pcs

50 pcs

35 pcs

60 pcs

50 pcs

A boxed assortment of popular sizes sold together for your convenience.

1400 psc

pcs

Twin-Threaded

MIXED PACKS - ASSORTED SIZES

Classic® Yellow

1305

pcs

Classic® Yellow

100 pcs

Solo Yellow

895 895 1,140 1,305

Self-Tapping

10 x 2

6x1

35 pcs

100 pcs

8 x 3/4

100 pcs

8 x 1/2

180 pcs

100 pcs 8x1

6 x 1/4

50 pcs

100 pcs

10 x 1/2

120 pcs

6 x 11/4

8 x 11/2

110 pcs

45 pcs

8x1

80 pcs

8 x 3/4

6 x 3/4

115 pcs

140 pcs

6 x 1/2

8 x 3/4

165 pcs

140 pcs

Product Code

Description

Qty

CLAFMP SOLOMP CWZMP

Classic Multi-Purpose Screws Solo Chipboard Screws Twin-Threaded Woodscrews

1,400 1,400 1,400

1400

10 x 5/8

70 pcs

psc

Twin-Threaded

1400 psc

Size (Metric)

Qty

Size (Metric)

Qty

Size (Imperial)

Qty

3.5 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

200 200 200 200 200 100 100 100 100

3.5 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

200 200 200 200 200 100 100 100 100

8x1 8 x 11/4 8 x 11/2 8x2 8 x 21/2 10 x 11/2 10 x 2 10 x 3 10 x 4

200 200 200 200 200 100 100 100 100

TIMBER CONSTRUCTION SCREWS

DECKING SCREWS

Materials

For decking platforms Available in:

EXTERIOR

C2 DECKING SCREW -

A2 SS

EXTERIOR

Double Countersunk

A premium decking screw using the C2 twin cut technology. Coated with a patented multi-layer corrosion resistant plating to withstand up to 1000 hrs in a salt spray cabinet. This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists. Product Code

Size (mm)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 65 4.5 x 75 4.5 x 65

9x2 9 x 21/2 9 x 27/8 9 x 21/2

250 250 250 1000

Tubs

Product Code

Size (mm)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 65 4.5 x 75

9x2 9 x 21/2 9 x 27/8

175 145 120

Bags

50C2D250 65C2D250 75C2D250 65C2D1000

50C2DB 65C2DB 75C2DB

CLASSIC DECKING SCREW A2 SS

SOLO DECKING SCREW

- Double Countersunk

EXTERIOR

- Double Countersunk

Used for attaching decking board to a timber substrate. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications.

An economic but highly effective softwood decking screw. Plated to withstand up to 500 hrs in a salt spray cabinet and designed to give a rapid installation and a secure fixing.

Product Code

Size (mm)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 65

9x2 9 x 21/2

250 250

Tubs 50DEXSS250 65DEXSS250

Size (mm)

Size (Imp. equiv.)

Qty

4.5 x 50 4.5 x 60 4.5 x 70

9x2 9 x 21/2 9 x 23/4

200 200 200

4.5 x 60

9 x 21/2

1000

Boxes 50SOLOD200 60SOLOD200 70SOLOD200

Tubs 60SOLOD1000

IN-DEX TIMBER SCREWS

TIMBER CONSTRUCTION SCREWS

IN-DEX TIMBER SCREWS

Materials

For timber constructions Available in:

EXTERIOR

A4 SS

A2 SS

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating this screw is ideal for outdoor applications. Also available with a wafer head for improved clamping or a low profile finish.

HEX HEAD -

WAFER HEAD -

EXTERIOR

8mm Hex Head

Product Code

EXTERIOR

T30/T40 Recess

Size (mm)

Socket Size (mm)

Qty

6.7 x 60 6.7 x 75 6.7 x 87 6.7 x 100 6.7 x 125 6.7 x 150 6.7 x 200 6.7 x 250

8 8 8 8 8 8 8 8

50 50 50 50 50 50 50 50

6.7 x 100 6.7 x 150 6.7 x 200

8 8 8

50 30 20

Boxes

Size (mm)

Product Code

Bit Type

Qty

Boxes (T30 & T40 bit included)

60IN 75IN 87IN 100IN 125IN 150IN 200IN 250IN

Bags 100INDEXTB 150INDEXTB 200INDEXTB

Packs 100INDEXP 150INDEXP

6.7 x 100 6.7 x 150

8 8

HEX HEAD -

6 4

95INW 125INW 150INW 175INW 200INW 225INW 250INW 275INW 300INW 350INW 400INW

8mm Hex Head

T30 T30 T30 T30 T40 T40 T40 T40 T40 T40 T40

50 50 50 50 50 50 50 25 25 25 25

6.7 x 95 6.7 x 125 6.7 x 150

T30 T30 T30

50 30 20

6.7 x 95 6.7 x 125 6.7 x 150

T30 T30 T30

6 5 4

Bags 95INDEXWB 125INDEXWB 150INDEXWB

Packs 95INDEXWP 125INDEXWP 150INDEXWP

A4 SS

6.7 x 95 6.7 x 125 6.7 x 150 6.7 x 175 8.0 x 200 8.0 x 225 8.0 x 250 8.0 x 275 8.0 x 300 8.0 x 350 8.0 x 400

WAFER HEAD -

A2 SS

T40 Recess Product Code

Size (mm)

Socket Size (mm)

Qty

8 8 8 8

25 25 25 25

Telescopic Tubes 75INDEXSST 100INDEXSST 125INDEXSST 150INDEXSST

6.7 x 75 6.7 x 100 6.7 x 125 6.7 x 150

Product Code

Size (mm)

Bit Type

Qty

Boxes (Driver Bit Included) 80INDEXWSS

8.0 x 80

T40

TIMBER CONSTRUCTION SCREWS

HEAVY DUTY TIMBER SCREWS

HEAVY DUTY TIMBER SCREW

Materials

For heavy duty timber constructions Available in:

EXTERIOR

The heavy duty in-dex screw dramatically decreases installation time as it doesnâ&#x20AC;&#x2122;t require a pilot hole into most wood types and can be installed with a power tool. Coated with patented multi-layer corrosion resistant plating to achieve 1,000 hours salt spray test. This screw is ideal for outdoor applications or where extra strength is required.

HEX HEAD -

EXTERIOR

10mm Hex Head Size (mm)

Product Code

Socket Size (mm)

Qty

Bags (Socket driver Included) 875INH 8100INH 8150INH 8200INH 10100INH 10150INH 10200INH

8.0 x 75 8.0 x 100 8.0 x 150 8.0 x 200 10.0 x 100 10.0 x 150 10.0 x 200

10 10 10 10 13 13 13

10 10 10 10 10 10 10

Driver Bits & Adaptors IMPACT BITS POZI PHILLIPS SEE PAGES

163 - 166

TIMDRIVE SLOTTED SQUARE

HEX NUT SETTERS

MAGNETIC ADAPTORS

EXTRIOR COACH SCREW / CARRIAGE BOLT

TIMBER CONSTRUCTION SCREWS

COACH SCREW

SOLO COACH SCREW

Exterior woodscrew Available in:

Single slash

EXTERIOR

Available in:

A traditional way of fastening timber applications, but has the added advantage of a corrosion resistant plating finish for external applications. Product Code

Size (mm)

Socket Size (mm)

Qty

6 x 40 6 x 50 6 x 75 8 x 50 8 x 75 8 x 100 8 x 120 10 x 100 10 x 130 10 x 150

10 10 10 13 13 13 13 17 17 17

10 10 10 10 10 10 10 10 10 10

Bags 640INCSB 650INCSB 675INCSB 850INCSB 875INCSB 8100INCSB 8120INCSB 10100INCSB 10130INCSB 10150INCSB

CARRIAGE BOLT Exterior bolt & nut Available in:

EXTERIOR

A heavy duty bolt used for fastening timbers. It has an impact resistant dome head and the square under the head locks into the timber to stop the bolt from spinning. Product Code

FOR FULL CARRIAGE BOLT RANGE SEE

PAGE 46

Size (mm)

Socket Size (mm)

Qty

10 x 100 10 x 150 10 x 160 10 x 200 10 x 220

17 17 17 17 17

10 10 10 10 10

YELLOW

A versatile heavy duty screw with a hex flanged head and is the modern replacement for traditional DIN 571 Coach Screws. Benefits from an aggressive slash point tip for easy driving and reduced splitting. Suitable for softwood, hardwood or masonry with a nylon plug. Zinc plated & yellow passivated for improved corrosion resistance. Product Code

Size (mm)

Socket Size (mm)

Qty

Boxes - Socket driver included 625SCSY 640SCSY 650SCSY 660SCSY 670SCSY 680SCSY 6100SCSY 840SCSY 850SCSY 860SCSY 870SCSY 880SCSY 8100SCSY 8120SCSY 1040SCSY 1050SCSY 1060SCSY 1070SCSY 1080SCSY 10100SCSY 10130SCSY 10160SCSY 1280SCSY 12100SCSY 12130SCSY 12160SCSY

6 x 25 6 x 40 6 x 50 6 x 60 6 x 70 6 x 80 6 x 100 8 x 40 8 x 50 8 x 60 8 x 70 8 x 80 8 x 100 8 x 120 10 x 40 10 x 50 10 x 60 10 x 70 10 x 80 10 x 100 10 x 130 10 x 160 12 x 80 12 x 100 12 x 130 12 x 160

8 8 8 8 8 8 8 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 16 16 16 16

100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25

Bags 10100INCB 10150INCB 10160INCB 10200INCB 10220INCB

TIMBER CONSTRUCTION SCREWS

COACH SCREW / NYLON PLUG

COACH SCREW

Materials

Used in wood & brick (with nylon plugs) Available in:

ZINC

A traditional heavy duty woodscrew used for timber to timber applications, attaching ironmongery to timber and into masonry with a nylon plug. Product Code

Size (mm)

Socket Size (mm)

Qty

12150CSCB

Boxes 0625CSC 0630CSC 0640CSC 0650CSC 0660CSC 0670CSC 0675CSC 0680CSC 06100CSC 0830CSC 0840CSC 0850CSC 0860CSC 0865CSC 0870CSC 0875CSC 0880CSC 0890CSC 08100CSC 08120CSC 08150CSC 1040CSC 1050CSC 1060CSC 1070CSC 1075CSC 1080CSC 10100CSC 10120CSC 10130CSC 10150CSC 10160CSC 10200CSC 1250CSC 1275CSC 1280CSC 12100CSC 12150CSC

Product Code

6 x 25 6 x 30 6 x 40 6 x 50 6 x 60 6 x 70 6 x 75 6 x 80 6 x 100 8 x 30 8 x 40 8 x 50 8 x 60 8 x 65 8 x 70 8 x 75 8 x 80 8 x 90 8 x 100 8 x 120 8 x 150 10 x 40 10 x 50 10 x 60 10 x 70 10 x 75 10 x 80 10 x 100 10 x 120 10 x 130 10 x 150 10 x 160 10 x 200 12 x 50 12 x 75 12 x 80 12 x 100 12 x 150

10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 19 19 19 19 19

250 250 200 200 200 200 100 100 200 200 200 100 100 100 100 100 100 50 50 50 50 100 100 100 100 100 50 50 50 50 25 25 20 100 50 25 25 25

6 x 50 6 x 70 6 x 100 8 x 50 8 x 60 8 x 80 8 x 100 10 x 50 10 x 80 10 x 100 10 x 120 10 x 130 10 x 150 12 x 80 12 x 100

10 10 10 13 13 13 13 17 17 17 17 17 17 19 19

120 100 70 75 65 48 40 45 30 35 24 23 18 25 20

Size (mm)

Socket Size (mm)

Qty

12 x 150

6 x 50 6 x 70 6 x 100 8 x 50 8 x 60 8 x 80 8 x 100 10 x 50 10 x 80 10 x 150 12 x 75

10 10 10 13 13 13 13 17 17 17 19

10 10 10 5 5 5 5 4 4 2 2

Packs 0650CSCP 0670CSCP 06100CSCP 0850CSCP 0860CSCP 0880CSCP 08100CSCP 1050CSCP 1080CSCP 10150CSCP 1275CSCP

COACH SCREW & NYLON PLUG Used In Brick

Product Code

Screw Size Plug Size Socket Qty (mm) (mm) Size (mm)

Bags 0660CSCNB 0680CSCNB 08100CSCNB

6 x 60 6 x 80 8 x 100

8 x 40 8 x 40 10 x 50

10 10 13

40 30 12

6 x 60 6 x 80 8 x 100

8 x 40 8 x 40 10 x 50

10 10 13

2 2 2

Packs 0660CSCNP 0680CSCNP 08100CSCNP

Bags 0650CSCB 0670CSCB 06100CSCB 0850CSCB 0860CSCB 0880CSCB 08100CSCB 1050CSCB 1080CSCB 10100CSCB 10120CSCB 10130CSCB 10150CSCB 1280CSCB 12100CSCB

NYLON PLUG Product Code

Plug Size (mm)

For Screw Size (mm)

Qty

6 x 30 8 x 40 10 x 50

3.5 - 5 5-6 6-8

200 100 70

6 x 30 8 x 40 10 x 50

3.5 - 5 5-6 6-8

20 10 5

Bags 06NLPB 08NLPB 10NLPB

Packs 06NLPP 08NLPP 10NLPP

METAL CONSTRUCTION SCREWS 28 - STITCHING SCREWS 28 - SELF-DRILLING SCREWS 30 - COMPOSITE PANEL SCREWS 30 - SLASH POINT SCREWS 31 - WING-TIP SCREWS 32 - COVER CAPS 32 - EPDM WASHERS 33 - SELA COVERS 33 - CORRUGATED SHEET FIXINGS 34 - METAL FRAMING SCREWS 35 - SELF-TAPPING SCREWS 37 - MACHINE SCREWS 38 - SOCKET SCREWS

METAL CONSTRUCTION SCREWS

SELF-DRILLING SCREWS

STITCHING SCREWS BI-MET

EXTERIOR

ZINC

Product Code

Size (mm)

Socket FW Size (mm) (mm)

EPDM (mm)

MDC (mm)

ETL (mm)

Qty

2 x 0.8

100

BI-METAL Boxes BMS22W16

6.3 x 22

8.0

11.0

16.0

EXTERIOR PLATED Boxes S22W16B S25W16B

6.3 x 22 6.3 x 25

8.0 8.0

6.3 x 25

8.0

12.0 12.0

16.0 16.0

2 x 0.8 2 x 0.8

13 16

100 100

12.0

16.0

2 x 0.8

Bags Used for stitching sheet metal without the need to pre-drill a hole. Self-drilling point and tapered shank, with a washered hexagon head.

SELF-DRILLING SCREWS FOR HEAVY SECTION STEEL BI-MET

EXTERIOR

ZINC

S25W16BB

ZINC PLATED Bags ZS22W16

6.3 x 22

8.0

11.0

16.0

FW - Fixed Washer | MDC - Max. Drilling Capacity | ETL - Effective Thread Length

Product Code

Size (mm)

Socket FW Size (mm) (mm)

EPDM (mm)

MDC (mm)

ETL (mm)

Qty

12.0 12.0 12.0 12.0

16 13 33 30

100 100 100 100

BI-METAL Boxes BMH38 BMH38W16 BMH55 BMH55W16

5.5 x 38 5.5 x 38 5.5 x 55 5.5 x 55

8.0 8.0 8.0 8.0

11.0 11.0 11.0 11.0

16.0 16.0

EXTERIOR PLATED Boxes H32B H32W16B H38B H38W16B H55B H55W16B H65W16B H80W16B H100B H100W16B

5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 55 5.5 x 55 5.5 x 65 5.5 x 80 5.5 x 100 5.5 x 100

8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0

12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0

16.0 16.0 16.0 16.0 16.0 16.0

12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0

13 10 19 16 36 33 43 53 P/T 81 53 P/T

100 100 100 100 100 100 100 100 100 100

5.5 x 38

8.0

12.0

16.0

12.0

12.0 12.0 12.0 12.0

10 16 33 53 P/T

35 49 35 49

Bags H38W16BB

ZINC PLATED Used for attaching metal to heavy gauge steel (max 12mm) without the need to pre-drill a hole.

Bags ZH32W16 ZH38W16 ZH55W16 ZH80W16

5.5 x 32 5.5 x 38 5.5 x 55 5.5 x 80

8.0 8.0 8.0 8.0

11.0 11.0 11.0 11.0

16.0 16.0 16.0 16.0

FW - Fixed Washer | MDC - Max. Drilling Capacity | ETL - Effective Thread Length

SELF-DRILLING SCREWS

Product Code

FOR LIGHT SECTION STEEL

Boxes

BI-MET

EXTERIOR

ZINC

Size (mm)

METAL CONSTRUCTION SCREWS

Socket FW Size (mm) (mm)

EPDM (mm)

MDC (mm)

ETL (mm)

Qty

5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0

12 9 19 25 22 37 34 57 87 84

100 100 100 100 100 100 100 100 100 100

BI-METAL BML25 BML25W16 BML32 BML38 BML38W16 BML50 BML50W16 BML70 BML100 BML100W16

5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70 5.5 x 100 5.5 x 100

8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0

11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0

16.0 16.0 16.0 16.0

EXTERIOR PLATED Boxes

APPROVED PRODUC TS*

L25B* L25W16B* L32B* L32W16B* L38B* L38W16B* L50B* L50W16B* L70B* L70W16B* L100B* L100W16B*

5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70 5.5 x 70 5.5 x 100 5.5 x 100

8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0

12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0

16.0 16.0 16.0 16.0 16.0 16.0

5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0

13 10 20 17 26 23 38 35 58 55 88 85

100 100 100 100 100 100 100 100 100 100 100 100

5.5 x 25 5.5 x 25 5.5 x 32 5.5 x 32 5.5 x 38 5.5 x 38 5.5 x 50 5.5 x 50 5.5 x 70

8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0

12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0

16.0 16.0 16.0 16.0 -

5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0

13 10 20 17 26 23 38 35 58

200 140 160 130 150 110 120 85 100

Bags

PLATING GUIDE Bi-met screws combine the ultimate corrosion resistance of an A2 stainless steel fastener with the exceptional drilling performance of a hardened carbon steel drill tip.

Exterior plating give a reliable and durable corrosion resistant coating which resists over 1,000 hours salt-spray.

Zinc plating screw are generally used for internal applications or in dry, sheltered conditions.

L25BB* L25W16BB* L32BB* L32W16BB* L38BB* L38W16BB* L50BB* L50W16BB* L70BB*

ZINC PLATED Boxes 00812HWSD 00834HWSD 01012HWSD 01058HWSD 01034HWSD 01234HWSD* 00121HWSD* 12114HWSD* 12112HWSD* 12134HWSD*

4.2 x 13 4.2 x 19 4.8 x 13 4.8 x 16 4.8 x 19 5.5 x 19 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 45

6.35 6.35 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0

8.5 8.5 10.0 10.0 10.0 11.0 11.0 11.0 11.0 11.0

3.0 3.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0

5 11 4 7 10 8 14 21 27 34

1,000 1,000 1,000 1,000 1,000 500 500 500 500 500

5.5 x 19 5.5 x 25 5.5 x 32 5.5 x 38 5.5 x 50 5.5 x 60 5.5 x 70

8.0 8.0 8.0 8.0 8.0 8.0 8.0

11.0 11.0 11.0 11.0 11.0 11.0 11.0

16.0 16.0 16.0 16.0 16.0 16.0 16.0

5.0 5.0 5.0 5.0 5.0 5.0 5.0

4 10 17 25 35 45 55

100 100 100 100 100 100 100

Bags ZL19W16* ZL25W16* ZL32W16* ZL38W16* ZL50W16* ZL60W16* ZL70W16*

FW - Fixed Washer | MDC - Max. Drilling Capacity | ETL - Effective Thread Length

METAL CONSTRUCTION SCREWS

COMPOSITE PANEL / SLASH POINT

COMPOSITE PANEL SCREWS FOR LIGHT SECTION STEEL BI-MET

EXTERIOR

Product Code

Size (mm)

Socket FW Size (mm) (mm)

EPDM MDC (mm) (mm)

ETL Qty (mm)

BI-METAL Boxes BMLH70W16 6.3/5.5 x 70 BMLH100W16 6.3/5.5 x 100

Specifically designed to attach composite panel to light section steel. Self-drilling point with hexagon head.

SLASH POINT SCREWS FOR TIMBER EXTERIOR

ZINC

8.0 8.0

11.0 11.0

16.0 16.0

5.0 5.0

54 S/T 100 84 S/T 100

5.0 5.0 5.0

67 S/T 100 83 S/T 100 100 S/T 100

EXTERIOR PLATED Boxes LH82W16B LH98W16B LH115W16B

5.5/6.3 x 82 5.5/6.3 x 98 5.5/6.3 x 115

8.0 8.0 8.0

12.0 12.0 12.0

16.0 16.0 16.0

FW - Fixed Washer | MDC - Max. Drilling Capacity | ETL - Effective Thread Length

Product Code

Size (mm)

Socket FW Size (mm) (mm)

EPDM (mm)

MDC (mm)

ETL Qty (mm)

EXTERIOR PLATED Boxes DS32W16B DS45W16B DS45W19B DS60W16B DS60W19B DS80W16B DS100W16B DS150W16B

6.3 x 32 6.3 x 45 6.3 x 45 6.3 x 60 6.3 x 60 6.3 x 80 6.3 x 100 6.3 x 150

8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0

12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0

16.0 16.0 19.0 16.0 19.0 16.0 16.0 16.0

0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

29 42 42 57 57 77 97 77 P/T

100 100 100 100 100 100 100 100

6.3 x 32 6.3 x 45

8.0 8.0

12.0 12.0

16.0 16.0

0.9 0.9

29 42

100 100

0.9 0.9 0.9 0.9 0.9 0.9

22 29 42 57 77 97

100 100 100 100 100 100

Bags DS32W16BB DS45W16BB

ZINC PLATED Designed to attach sheet metal (Max 0.9mm) to timber. Slash point for easy pick up.

Bags ZDS25W16 ZDS32W16 ZDS45W16 ZDS60W16 ZDS90W16 ZDS100W16

6.3 x 25 6.3 x 32 6.3 x 45 6.3 x 60 6.3 x 80 6.3 x 100

8.0 8.0 8.0 8.0 8.0 8.0

13.0 13.0 13.0 13.0 13.0 13.0

16.0 16.0 16.0 16.0 16.0 16.0

FW - Fixed Washer | MDC - Max. Drilling Capacity | ETL - Effective Thread Length

WING TIP SCREWS

Product Code

FOR LIGHT SECTION STEEL

Boxes

BI-MET

EXTERIOR

ZINC

Size (mm)

METAL CONSTRUCTION SCREWS

Recess Size

Max. Drilling Capacity (mm)

To Suit Timber (mm)

Qty

<18 29 - 43 44 - 63

200 200 100

<18 19 - 28 29 - 43 44 - 63 64 - 78

200 200 200 100 100

BI-METAL BMLW38 BMLW65 BMLW85

4.8 x 38 5.5 x 65 5.5 x 85

PH2 PH3 PH3

4.0 5.0 5.0

EXTERIOR PLATED Winged screws, for fixing timber to light section steel. Countersunk head, winged with a self-drilling point. Collated Sizes Available on page 67

Boxes LW38S LW50S LW65S LW85S LW100S

4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100

PH2 PH3 PH3 PH3 PH3

4.0 5.0 5.0 5.0 5.0

ZINC PLATED Boxes LW38B LW50B LW65B LW85B LW100B LW130B LW150B

4.8 x 38 5.5 x 50 5.5 x 65 5.5 x 85 5.5 x 100 5.5 x 130 5.5 x 150

PH2 PH3 PH3 PH3 PH3 PH3 PH3

4.0 5.0 5.0 5.0 5.0 5.0 5.0

<18 19 - 28 29 - 43 44 - 63 64 - 78 79 - 108 109 - 128

200 200 200 100 100 100 100

LW38BB LW50BB LW65BB

4.8 x 38 5.5 x 50 5.5 x 65

PH2 PH3 PH3

5.0 5.0 5.0

<18 19 - 28 29 - 43

260 150 120

Product Code

Size (mm)

Recess Size

Max. Drilling Capacity (mm)

To Suit Timber (mm)

Qty

≤13 14 - 29 30 - 49 50 - 84

200 200 100 100

≤13 14 - 29 30 - 49 50 - 84

200 200 100 100

Bags

WING TIP SCREWS FOR HEAVY SECTION STEEL BI-MET

ZINC

BI-METAL Boxes BMHW55 BMHW65 BMHW85 BMHW120

5.5 x 55 5.5 x 65 5.5 x 85 5.5 x 120

PH3 PH3 PH3 PH3

12.0 12.0 12.0 12.0

ZINC PLATED Winged screws, for fixing timber to heavy section steel. Countersunk head, winged with a self-drilling point.

Boxes HW45B HW65B HW85B HW120B

5.5 x 45 5.5 x 65 5.5 x 85 5.5 x 120

PH3 PH3 PH3 PH3

12.0 12.0 12.0 12.0

METAL CONSTRUCTION SCREWS

HEX COVER CAPS / EPDM WASHERS

HEX HEAD COVER CAPS

For sealing roofing and cladding screws A selection of washers and cover caps for use with our range of roofing screws. Cover caps are a perfect way to blend in screws with coloured panels. *NOTE: POPPY IS ALSO AVAILABLE IN 29MM Product Code Product Code (16mm) (19mm)

Colour

Bags

Product Code Product Code (16mm) (19mm)

Colour

Bags

Black

1600E53CAP

1900E53CAP

Merlin Grey

1618B25CAP

1918B25CAP

White

1600E55CAP

1900E55CAP

Terracotta

1604C39CAP

1904C39CAP

Raven/Slate Blue 1618B29CAP 1618C39CAP Ocean Blue

1918C39CAP

Petra

1604D44CAP

1904D44CAP

Solent Blue

1618E53CAP

1918E53CAP

Poppy*

1604E53CAP

1904E53CAP

Britannia

1618E58CAP

1918E58CAP

Tangerine

1606E53CAP

1906E53CAP

Cornflower

1620E51CAP

1920E51CAP

Beige

1608B17CAP

1908B17CAP

Flame Red

16RAL3000CAP 19RAL3000CAP

1918B29CAP

Vandyke Brown

1608B29CAP

1908B29CAP

Burano

16RAL3004CAP 19RAL3004CAP

Bamboo

1608C35CAP

1908C35CAP

Ultra Marine

16RAL5002CAP 19RAL5002CAP

Goosewing Grey 1610A05CAP 1610B19CAP Mushroom

1910A05CAP

Sargasso

16RAL5003CAP 19RAL5003CAP

1910B19CAP

Mid Blue

16RAL5005CAP 19RAL5005CAP

Svelte Grey

1610B23CAP

1910B23CAP

Gentian Blue

16RAL5010CAP 19RAL5010CAP

Honesty

1610C31CAP

1910C31CAP

Heritage

16RAL6002CAP 19RAL6002CAP

Aztec

1610E55CAP

1910E55CAP

Squirrel

16RAL7000CAP 19RAL7000CAP

Meadowland

1612B17CAP

1912B17CAP

Slate Grey

16RAL7012CAP 19RAL7012CAP

Moorland Green

1612B21CAP

1912B21CAP

Anthracite

16RAL7016CAP 19RAL7016CAP

Olive Green

1612B27CAP

1912B27CAP

Oyster

16RAL7035CAP 19RAL7035CAP

Juniper Green

1612B29CAP

1912B29CAP

Quartz

16RAL7039CAP 19RAL7039CAP

Sage

1612D45CAP

1912D45CAP

Hamlet

16RAL9002CAP 19RAL9002CAP

Pinewood

1614C39CAP

1914C39CAP 1914E49CAP

White (Creamy) 16RAL9003CAP 19RAL9003CAP 16RAL9006CAP 19RAL9006CAP White Alum

Eau de Nil

1614E49CAP

Verona

1614E53CAP

1914E53CAP

Pure White

Albatross

1618B17CAP

1918B17CAP

Metallic Silver

16RAL9010CAP 19RAL9010CAP 16S7500CAP

19S7500CAP

EPDM WASHERS

Metal Washer with Rubber Available in:

GALV.

ALUMIN.

EPDM washer used where parts come in contact with water. To be used with our range of roofing and metal construction screws.

Product Code

Washer (mm)

Hole (mm)

Washer Type

Bag Qty

16 19 29

6.8 5.8 6.8

Galv. Steel Galv. Steel Aluminium

100 100 100

Bags WG16 WG19 WA29

COVERS, WASHERS AND FIXINGS

METAL CONSTRUCTION SCREWS

COVERS, WASHERS AND FIXINGS For sealing roofing and cladding screws

Sela washers, Sela covers and Dowty type washers are a versatile product that are used to create a water tight seal for use with screws, bolts and nails.

SELA COVER AND WASHER SC

Used when securing roofing sheets to create a watertight seal. When using spring head roofing nails just a washer is required as the head of the nail will cover the entire washer to provide a watertight seal. If using hook/roofing bolts you will also require a Sela Cover to cover the washer and nut to complete the seal.

Product Code

Size (mm)

Bag Qty

28 M6 x 28 M8 x 28

75 75 75

Bags 28SC 628SW 828SW

DOWTY TYPE WASHER

Used mainly with drive screw nails and spring head roofing nails for attaching corrugated roofing sheets to wooden purlins. The washer provides a watertight seal when used correctly.

Product Code

Size (mm)

Bag Qty

M6 M8

75 75

Bags 6BPRS 8BPRS

CORRUGATED SHEET FIXINGS

Product Code

Designed for fixing plastic corrugated sheets to timber. The hinged cover cap provides a tight seal to prevent water ingress.

Colour

Screw Size (Imp.)

Bag Qty

Clear Black

10 x 3 10 x 3

50 50

Bags CSFC CSFB

METAL CONSTRUCTION SCREWS

METAL FRAMING SCREWS

METAL FRAMING SCREWS For steel to steel applications

PAN HEAD -

EXTERIOR

Low Profile - Phillips Recess

Product Code

Size (mm)

Max. Drilling Thickness (mm)

Qty

4.8 x 16

4.0

500

4.0

200

Boxes LPP16

Size (Imp.)

Product Code

Size Max. Drilling Qty (mm) Thickness (mm)

Boxes

Boxes of 200’s 16LP

ZINC

Standard Profile - Phillips Recess

4.8 x 16

00658PPSD 00061PPSD 07716PPSD 00812PPSD 00834PPSD 00081PPSD

6 x 5/8 6x1 7 x 7/16 8 x 1/2 8 x 3/4 8x1

3.5 x 16 3.5 x 25 3.9 x 11 4.2 x 13 4.2 x 19 4.2 x 25

2.5 2.5 2.5 3.0 3.0 3.0

1,000 1,000 1,000 1,000 1,000 1,000

8 x 1/2 4.2 x 13 8 x 3/4 4.2 x 19 8 x 1 4.2 x 25

3.0 3.0 3.0

200 200 200

Boxes of 200’s

WAFER HEAD -

EXTERIOR

Low Profile - Phillips Recess

Product Code

Size (mm)

Max. Drilling Thickness (mm)

Qty

200

812PSD 834PSD 81PSD

PAN HEAD -

Boxes of 200’s 22LPW

4.8 x 22

PANCAKE HEAD -

EXTERIOR

Low Profile - Phillips Recess

Product Code

Size (Imp.)

Size Max. Drilling Qty (mm) Thickness (mm)

Boxes 00812SPSD 8 x 1/2 4.2 x 13

APPROVED PRODUC TS

Product Code

Size (mm)

Max. Drilling Thickness (mm)

Qty

5.5 x 19 5.5 x 26

5.0 5.0

500 500

5.0

200

Boxes FP19 FP26

Boxes of 200’s 19FP

5.5 x 19

ZINC

Standard Profile - Square Recess

3.0

1,000

SELF-TAPPING SCREWS

METAL CONSTRUCTION SCREWS

SELF-TAPPING SCREWS For fixing to metal Available in:

ZINC

BLACK

Mainly used for stitching metal together or attaching to metal. Please note a pre-drilled hole is required.

COUNTERSUNK -

ZINC

Use for a flush finish. Product Code

Size (Imperial)

Driver Bit Size

Qty

4 x 3/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 11/4 6 x 11/2 8 x 1/2 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8 x 13/4 8x2

No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500

Boxes

Product Code

Size (Imperial)

Driver Bit Size

Qty

10 x 3/4 10 x 1 10 x 11/4 10 x 11/2 10 x 2 12 x 11/2

No.2 No.2 No.2 No.2 No.2 No.3

1,000 1,000 1,000 500 500 500

6 x 3/4 8 x 1/2 8 x 3/4 8x1 8 x 1 1/4 8 x 1 1/2 10 x 1 1/4

No.2 No.2 No.2 No.2 No.2 No.2 No.2

25 22 20 18 16 14 10

Boxes

00438CCAZ 00612CCAZ 00658CCAZ 00634CCAZ 00061CCAZ 06114CCAZ 06112CCAZ 00812CCAZ 00834CCAZ 00081CCAZ 08114CCAZ 08112CCAZ 08134CCAZ 00082CCAZ

FLANGE HEAD -

Size (Imperial)

Driver Bit Size

Qty

6 x 1/2 6 x 3/4 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 10 x 3/4

No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

8 x 3/8 8 x 1/2 8 x 3/4 8x1

No.2 No.2 No.2 No.2

16 16 14 12

Boxes 00612CFAZ 00634CFAZ 00838CFAZ 00812CFAZ 00858CFAZ 00834CFAZ 00081CFAZ 08114CFAZ 01034CFAZ

FLANGE HEAD -

BLACK

Flange head for extra cover for clamping.

Product Code

Size (Imperial)

Driver Bit Size

Qty

6x1 8 x 1/2

No.2 No.2

1,000 1,000

Boxes

Packs 00838CFAZP 00812CFAZP 00834CFAZP 00081CFAZP

Packs 00634CCAZP 00812CCAZP 00834CCAZP 00081CCAZP 08114CCAZP 08112CCAZP 10114CCAZP

ZINC

Flange head for extra cover for clamping.

Product Code

01034CCAZ 00101CCAZ 10114CCAZ 10112CCAZ 00102CCAZ 12112CCAZ

00061CFAB 00812CFAB

SELF-TAPPING MIXED TRAY - ASSORTMENT OF SIZES AVAILABLE

PAGE 21 35

METAL CONSTRUCTION SCREWS

PAN HEAD -

SELF-TAPPING SCREWS

ZINC

Use when extra clamping is needed. Product Code

Size (Imperial)

Driver Bit Size

Qty

2 x 1/4 2 x 5/16 4 x 3/8 4 x 1/2 6 x 1/4 6 x 3/8 6 x 1/2 6 x 5/8 6 x 3/4 6x1 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 11/4 8 x 11/2 8x2 10 x 1/2 10 x 5/8 10 x 3/4

No.1 No.1 No.1 No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 1,000

Boxes 00214CPAZ 02516CPAZ 00438CPAZ 00412CPAZ 00614CPAZ 00638CPAZ 00612CPAZ 00658CPAZ 00634CPAZ 00061CPAZ 00838CPAZ 00812CPAZ 00858CPAZ 00834CPAZ 00081CPAZ 08114CPAZ 08112CPAZ 00082CPAZ 01012CPAZ 01058CPAZ 01034CPAZ

Product Code

Size (Imperial)

Driver Bit Size

Qty

10 x 1 10 x 11/4 10 x 11/2 10 x 2 12 x 1/2 12 x 1 12 x 11/2 14 x 3/4

No.2 No.2 No.2 No.2 No.3 No.3 No.3 No.3

1,000 1,000 500 500 500 1,000 500 1,000

6 x 1/4 6 x 3/8 6 x 1/2 6 x 3/4 8 x 3/8 8 x 1/2 8 x 5/8 8 x 3/4 8x1 10 x 1/2 10 x 5/8 10 x 3/4

No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2

30 25 20 18 16 16 14 14 12 10 10 10

Boxes 00101CPAZ 10114CPAZ 10112CPAZ 00102CPAZ 01212CPAZ 00121CPAZ 12112CPAZ 01434CPAZ

Packs 00614CPAZP 00638CPAZP 00612CPAZP 00634CPAZP 00838CPAZP 00812CPAZP 00858CPAZP 00834CPAZP 00081CPAZP 01012CPAZP 01058CPAZP 01034CPAZP

COBALT, M2 FULLY GROUND & ROLL FORGED

JOBBER DRILLS SEE PAGES

129 - 132 36

MACHINE SCREWS

METAL CONSTRUCTION SCREWS

MACHINE SCREWS

For use in internal thread holes Available in:

ZINC

COUNTERSUNK -

ZINC

Used with metric internal threaded holes that have been countersunk. Product Code

Size (mm)

Qty

M4 x 8 M4 x 10 M4 x 12 M4 x 20 M4 x 25 M4 x 40 M5 x 10 M5 x 12 M5 x 16 M5 x 20 M5 x 25 M5 x 30 M5 x 40 M5 x 50 M6 x 10 M6 x 12

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Boxes

Size (mm)

Qty

M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50

100 100 100 100 100 100

M4 x 25 M5 x 10 M5 x 16 M5 x 20 M5 x 25 M5 x 30 M5 x 40 M6 x 20 M6 x 40

30 40 35 30 25 50 15 20 10

Size (mm)

Qty

5050PPM 5100ppm 6012PPM 6016PPM 6020PPM 6025PPM

M5 x 50 M5 X 100 M6 x 12 M6 x 16 M6 x 20 M6 x 25

100 100 100 100 100 100

6040PPM

M6 x 40

100

M4 x 12 M4 x 20 M4 x 25 M4 x 30 M4 x 40 M5 x 30 M5 x 50 M6 x 16 M6 x 40

40 32 30 25 20 15 10 15 10

Product Code

Boxes

4008CPM 4010CPM 4012CPM 4020CPM 4025CPM 4040CPM 5010CPM 5012CPM 5016CPM 5020CPM 5025CPM 5030CPM 5040CPM 5050CPM 6010CPM 6012CPM

PAN HEAD -

6016CPM 6020CPM 6025CPM 6030CPM 6040CPM 6050CPM

Packs 4025CPMP 5010CPMP 5016CPMP 5020CPMP 5025CPMP 5030CPMP 5040CPMP 6020CPMP 6040CPMP

ZINC

Used with metric internal threaded holes, pan head provides extra clamping. Size (mm)

Qty

4010PPM 4012PPM 4016PPM 4020PPM 4025PPM 4030PPM 4040PPM 4050PPM 4080PPM 5008PPM 5010PPM 5012PPM 5016PPM 5020PPM 5025PPM 5030PPM

M4 x 10 M4 x 12 M4 x 16 M4 x 20 M4 x 25 M4 x 30 M4 x 40 M4 x 50 M4 x 80 M5 x 8 M5 x 10 M5 x 12 M5 x 16 M5 x 20 M5 x 25 M5 x 30

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

5040PPM

M5 x 40

100

Product Code

Boxes

Product Code

Boxes

Packs 4012PPMP 4020PPMP 4025PPMP 4030PPMP 4040PPMP 5030PPMP 5050PPMP 6016PPMP 6040PPMP

METAL CONSTRUCTION SCREWS

SOCKET SCREWS

For use in internal thread holes Available in:

A2 SS

COUNTERSUNK -

A2 SS

Designed for use in applications where the head is flush with joining parts. Conforms to ISO 10642. Product Code

Size (mm)

Hex Recess (mm)

Qty

Product Code

M6 x 16 M6 x 16 M6 x 25 M8 x 25 M8 x 30

5 5 5 6 6

500 200 200 100 100

616CSKSSX 620CSKSSX 625CSKSSX 825CSKSSX 830CSKSSX

Boxes

Size (mm)

Hex Recess (mm)

Qty

M6 x 16 M6 x 16 M6 x 25 M8 x 25 M8 x 30

5 5 5 6 6

10 10 10 10 10

Size (mm)

Hex Recess (mm)

Qty

M5 x 16 M5 x 20 M6 x 16 M6 x 20 M6 x 25 M8 x 20 M8 x 25

4 4 5 5 5 6 6

10 10 10 10 10 10 10

Size (mm)

Hex Recess (mm)

Qty

M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M8 x 25

5 5 5 5 5 6

10 10 10 10 10 10

Boxes

616CSKSS 620CSKSS 625CSKSS 825CSKSS 830CSKSS

CAP -

A2 SS

Socket head cap screws are designed to be used with the head protruding. Conforms to ISO 4762. Product Code

Size (mm)

Hex Recess (mm)

Qty

Product Code

M5 x 16 M5 x 20 M6 x 16 M6 x 20 M6 x 25 M8 x 20 M8 x 25

4 4 5 5 5 6 6

500 500 200 200 200 200 200

516CAPSSX 520CAPSSX 616CAPSSX 620CAPSSX 625CAPSSX 820CAPSSX 825CAPSSX

Boxes

516CAPSS 520CAPSS 616CAPSS 620CAPSS 625CAPSS 820CAPSS 825CAPSS

BUTTON -

A2 SS

For applications that allow the head to protrude above the joining parts. The button head protects adjoining parts from damage. Conforms to ISO 7380. Product Code

Size (mm)

Hex Recess (mm)

Qty

Product Code

M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M8 x 25

5 5 5 5 5 6

500 500 500 200 200 100

612BUTSSX 616BUTSSX 620BUTSSX 625BUTSSX 630BUTSSX 825BUTSSX

Boxes 612BUTSS 616BUTSS 620BUTSS 625BUTSS 630BUTSS 825BUTSS

Boxes

WINDOW FABRICATION SCREWS 40 - FOR UNREINFORCED PVCu FRAMES 42 - FOR REINFORCED PVCu FRAMES

WINDOW FABRICATION SCREWS

UNREINFORCED PVCu FRAMES

FOR UNREINFORCED PVCu FRAMES (HARDWARE) A comprehensive range of self piercing sharp point screws used for the construction of PVCu windows\doors and for attaching hardware to the frames. Also used to retain or attach to frames using modern day plastic reinforcement. Available in:

ZINC

YELLOW

A2 SS

COUNTERSUNK HEAD WITH RIBS, SINGLE THREAD, GIMLET TIP

COUNTERSUNK HEAD, HI-LOW THREAD, SLASH TIP

Multiple uses for fitting a variety of hardware to frames where there is no steel or aluminium reinforcement present. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes. The Stainless Steel option should be used where there is a corrosive environment.

An alternative to the single thread range offering a slash point and High/Low thread. Can also be used when ‘pinning’ PVC reinforcement. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes.

Product Code

Size (mm)

Box Qty

ZINC 201Z 202Z 204Z 205Z 203Z 206Z 207Z 208Z 209Z* 210Z*

4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.3 x 45 4.3 x 55 4.8 x 25 4.8 x 38 4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.3 x 45 4.3 x 55 4.8 x 25

1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000

STAINLESS STEEL 201SS 202SS 204SS 205SS 203SS 206SS 209SS*

4.3 x 16 4.3 x 20 4.3 x 25 4.3 x 30 4.3 x 35 4.3 x 40 4.8 x 25

1,000 1,000 1,000 1,000 1,000 1,000 1,000

* REPAIR SCREWS FOR STRIPPED HOLES.

Box Qty

ZINC 1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000

YELLOW 201Y 202Y 204Y 205Y 203Y 206Y 207Y 208Y 209Y*

Size (mm)

104Z 105Z 106Z 109Z*

4.3 x 25 4.3 x 30 4.3 x 40 4.8 x 25

104Y 105Y 106Y 109Y*

4.3 x 25 4.3 x 30 4.3 x 40 4.8 x 25

1,000 1,000 1,000 1,000

YELLOW 1,000 1,000 1,000 1,000

* REPAIR SCREWS FOR STRIPPED HOLES.

UNREINFORCED PVCu FRAMES

WINDOW FABRICATION SCREWS

FOR UNREINFORCED PVCu FRAMES (FRICTION STAY) A comprehensive range of self piercing sharp point screws used for the construction of a PVCu window\door to fix friction stay on to PVCu.

Available in:

ZINC

A2 SS

SHALLOW PAN WITH SERRATIONS, SINGLE THREAD, GIMLET TIP

SHALLOW PAN COUNTERSUNK HEAD, SINGLE THREAD, GIMLET TIP

For attaching friction stays to PVCu frames. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion.

For attaching friction stays with countersunk holes to PVCu frames. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion.

Product Code

Size (mm)

Box Qty

ZINC 215Z 216Z 217Z 218Z

4.8 x 16 4.8 x 20 4.8 x 25 4.8 x 30 4.8 x 16 4.8 x 20 4.8 x 25 4.8 x 30

Box Qty

ZINC 1.000 1.000 1.000 1.000

STAINLESS STEEL 215SS 216SS 217SS 218SS

Size (mm)

1.000 1.000 1.000 1.000

213Z 211Z 212Z

4.3 x 16 4.3 x 20 4.3 x 25

1,000 1,000 1,000

STAINLESS STEEL 213SS 211SS 212SS

4.3 x 16 4.3 x 20 4.3 x 25

1,000 1,000 1,000

SHALLOW PAN COUNTERSUNK HEAD, HIGHLOW THREAD, SLASH TIP

For attaching friction stays to PVCu frames. An alternative to the single thread range offering a slash point and a High/Low thread to aid speed of insertion and pull out, respectively. Product Code

Size (mm)

Box Qty

ZINC 111Z 112Z

4.3 x 20 4.3 x 25

1,000 1,000

WINDOW FABRICATION SCREWS

REINFORCED PVCu FRAMES

ELEMENT SCREWS

MACHINE SCREWS

YELLOW

ZINC

Mechanical jointing screw with special truncated head for fixing either frame to frame or frame to mullions. The flat area underneath the head increases surface area to improve clamping. Size (mm)

Product Code

A countersunk metric threaded machine screw used for fastening handles or espagnolettes into predefined holes in frames. A heavier gauge screw for what is normally a heavier duty requirement.

Box Qty

Product Code

200 200 200 200

520Z 530Z 540Z 545Z 550Z

Size (mm)

YELLOW 191Y 192Y 193Y 194Y

4.8 x 55 4.8 x 65 4.8 x 80 4.8 x 95

Box Qty

ZINC M5 x 20 M5 x 30 M5 x 40 M5 x 45 M5 x 50

500 500 500 500 500

FOR REINFORCED PVCu FRAMES (HARDWARE) A comprehensive range of self-drilling screws used for the construction of a PVCu window/door and for attaching hardware where there is a metal reinforcement. Available in:

ZINC

YELLOW

MART SS

WAFER FLANGE HEAD, SELF-TAPPING THREAD, DRILL POINT (BAYPOLE)

PAN HEAD, SELF-TAPPING THREAD, DRILL POINT

Used for attaching steel hardware to steel reinforced PVCu sections. The flat underside of the screws head allows it to clamp the materials together firmly. Product Code

Size (mm)

Box Qty

Specifically designed for the joining of PVCu bay window sections but frequently used for other window and door fabrication purposes. Product Code

ZINC 130Z 131Z 132Z 133Z

4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25

Box Qty

ZINC 1,000 1,000 1,000 1,000

MART. STAINLESS STEEL 130SS 131SS 132SS 133SS

Size (mm)

1,000 1,000 1,000 1,000

289Z 290Z 291Z 292Z 293Z 294Z 295Z

4.8 x 40 4.8 x 50 4.8 x 60 4.8 x 70 4.8 x 80 4.8 x 90 4.8 x 100

200 200 200 200 200 200 200

REINFORCED PVCu FRAMES

WINDOW FABRICATION SCREWS

NIPPLE HEAD, SELFTAPPING THREAD, DRILL POINT (WEATHER BAR)

For use when attaching a weather bar or drip rail to PVCu window and door frames to prevent water ingress. Large head provides easy and secure clipping. Product Code

Size (mm)

Box Qty

BUGLE HEAD, SELFTAPPING THREAD, DRILL TIP (CILL SCREW)

Used for attaching cills to the base of door or window frames. The self-drilling point permits the screw to drill through both reinforced and unreinforced frames. Product Code

ZINC 241Z

4.0 x 13

Multiple uses for fitting a variety of hardware to frames where there is a steel or aluminium reinforcement present. The smaller lengths with a ribbed countersunk head can also be used when pinning reinforcement. Size (mm)

225Z 226Z 227Z

Box Qty

3.9 x 13 3.9 x 16 3.9 x 19 3.9 x 25 3.6 x 29 3.9 x 32 3.9 x 38 3.9 x 45

1,000 1,000 1,000 1,000 1,000 1,000 1,000 500

YELLOW 120Y# 121Y# 122Y# 123Y 124Y 125Y 127Y

3.9 x 13 3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 32 3.9 x 38 3.9 x 45

1,000 1,000 1,000 1,000 1,000 1,000 500

4.2 x 50 4.2 x 55 4.2 x 65

500 500 200

COUNTERSUNK HEAD, METRIC THREAD, SELF-DRILLING POINT

An alternative to the self tapping thread version. This metric threaded screw has multiple uses for fitting a variety of hardware to frames where there is a steel reinforcement present. Product Code

ZINC 120Z# 121Z# 122Z# 123Z 126Z 124Z 125Z 127Z

Box Qty

ZINC 1,000

COUNTERSUNK HEAD, SELF-TAPPING THREAD, SELF-DRILLING POINT

Product Code

Size (mm)

Box Qty

ZINC 150Z 151Z 153Z 154Z 155Z

M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38

150Y 151Y 153Y 154Y 155Y

M4 x 16 M4 x 19 M4 x 25 M4 x 32 M4 x 38

1,000 1,000 1,000 1,000 500

YELLOW 1,000 1,000 1,000 1,000 500

MART. STAINLESS STEEL 121SS# 122SS# 123SS 124SS 125SS

3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 32 3.9 x 38

1,000 1,000 1,000 1,000 1,000

# RIBS UNDER HEAD

WINDOW FABRICATION SCREWS

REINFORCED PVCu FRAMES

COUNTERSUNK FACET HEAD, METRIC THREAD, SELF-DRILLING POINT

Frequently used with auto feed machines when ‘pinning’ steel reinforcement inside PVCu frames.

Size (mm)

Product Code

Box Qty

COUNTERSUNK HEAD, SELF-TAPPING THREAD, SELF-DRILLING POINT

A heavier gauge screw, generally used where extra strength is required such as attaching hinges to a steel reinforced frame. Countersunk head to suit the pre-defined holes in standard hinges. Product Code

ZINC 230Z 231Z 232Z

M4 x 13 M4 x 16 M4 x 19 M4 x 16

Box Qty

ZINC 1,000 1,000 1,000

MART. STAINLESS STEEL 231SS

Size (mm)

1,000

423Z 424Z 425Z 427Z 429Z

4.8 x 25 4.8 x 32 4.8 x 38 4.8 x 45 4.8 x 60

1,000 500 500 500 200

FOR REINFORCED PVCu FRAMES (FRICTION STAY) A range of fasteners designed to fix friction stay on to PVCu with metal re-enforcement. Available in:

ZINC

MART SS

SHALLOW PAN, SELF-TAPPING THREAD, SELF-DRILLING POINT Product Code

Size (mm)

Box Qty

ZINC

For attaching friction stays with countersunk holes to steel reinforced PVCu frames. The larger 4.8mm diameter items known as repair screws are frequently used in stripped holes. The Stainless Steel option should be used where there is a corrosive environment or an increased risk of corrosion.

135Z 136Z 137Z 138Z 141Z* 142Z* 143Z*

3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 29 4.8 x 16 4.8 x 19 4.8 x 23

1,000 1,000 1,000 1,000 1,000 1,000 1,000

MART. STAINLESS STEEL 135SS 136SS 137SS 138SS 143SS*

3.9 x 16 3.9 x 19 3.9 x 25 3.9 x 29 4.8 x 23

1,000 1,000 1,000 1,000 1,000

* REPAIR SCREWS FOR STRIPPED HOLES.

BOLTS, SETS, NUTS AND WASHERS 46 - CARRIAGE BOLTS 48 - ROOFING BOLTS 48 - CABLE TRAY BOLTS 49 - THREADED BAR 49 - SETS 51 - MIXED SET 52 - NUTS 54 - WASHERS

BOLTS, SETS, NUTS AND WASHERS

CARRIAGE BOLT

STAINLESS STEEL CARRIAGE BOLT

Materials

Domed head bolt with a metric thread Available in:

A2 SS

A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber. Fully threaded up to 150mm. Product Code

Thread x Length (mm)

Qty

M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 75 M6 x 100 M8 x 40 M8 x 50 M8 x 60 M8 x 75 M8 x 80 M8 x 100 M8 x 130 M8 x 150 M10 x 75 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 150 M12 x 75 M12 x 100 M12 x 110 M12 x 130 M12 x 150

200 200 200 200 50 50 100 100 100 50 50 50 25 25 50 50 50 25 25 25 25 50 50 25 25 25

M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 75 M6 x 100 M8 x 40 M8 x 50 M8 x 60 M8 x 75 M8 x 80 M8 x 100 M8 x 130 M8 x 150 M10 x 75 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130

10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5

Boxes 0625CBSS 0630CBSS 0640CBSS 0650CBSS 0675CBSS 06100CBSS 0840CBSS 0850CBSS 0860CBSS 0875CBSS 0880CBSS 08100CBSS 08130CBSS 08150CBSS 1075CBSS 1090CBSS 10100CBSS 10110CBSS 10120CBSS 10130CBSS 10150CBSS 1275CBSS 12100CBSS 12110CBSS 12130CBSS 12150CBSS

Product Code

Thread x Length (mm)

Qty

M10 x 150 M12 x 75 M12 x 100 M12 x 110 M12 x 130 M12 x 150

5 5 5 5 5 5

Bags 10150CBSSX 1275CBSSX 12100CBSSX 12110CBSSX 12130CBSSX 12150CBSSX

Packs - Nut Included M8 x 100 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M12 x 100 M12 x 130

08100CBSSP 08130CBSSP 08150CBSSP 1075CBSSP 10100CBSSP 10120CBSSP 10130CBSSP 10150CBSSP 12100CBSSP 12130CBSSP

4 3 2 3 2 2 2 2 2 2

EXTERIOR CARRIAGE BOLT Domed head bolt with a metric thread Available in: EXTERIOR

Bags 0625CBSSX 0630CBSSX 0640CBSSX 0650CBSSX 0675CBSSX 06100CBSSX 0840CBSSX 0850CBSSX 0860CBSSX 0875CBSSX 0880CBSSX 08100CBSSX 08130CBSSX 08150CBSSX 1075CBSSX 1090CBSSX 10100CBSSX 10110CBSSX 10120CBSSX 10130CBSSX

Exterior plated (Olive Green) to withstand up to 500hrs salt spray testing. Fully threaded up to 150mm. Product Code

Materials

Thread x Length Nut Socket (mm) Size (mm)

Qty

Bags 10100INCB 10150INCB 10160INCB 10200INCB 10220INCB

M10 x 100 M10 x 150 M10 x 160 M10 x 200 M10 x 220

17 17 17 17 17

10 10 10 10 10

CARRIAGE BOLT AND NUT

BOLTS, SETS, NUTS AND WASHERS

ZINC CARRIAGE BOLT & HEX NUT

Materials

Domed head bolt with a metric thread Available in:

ZINC

A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber. Fully threaded up to 150mm. Product Code

Thread x Length (mm)

Nut Socket Size (mm)

Qty

M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 65 M6 x 70 M6 x 75 M6 x 100 M6 x 130 M6 x 150 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 45 M8 x 50 M8 x 60 M8 x 65 M8 x 70 M8 x 75 M8 x 80 M8 x 90 M8 x 100 M8 x 110 M8 x 120 M8 x 130 M8 x 150 M8 x 180 M8 x 200 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 65 M10 x 70 M10 x 75 M10 x 80 M10 x 90 M10 x 100 M10 x 110 M10 x 120 M10 x 130 M10 x 140 M10 x 150 M10 x 160 M10 x 180 M10 x 200 M10 x 220 M10 x 240 M10 x 260 M10 x 280 M10 x 300

10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17

200 200 200 200 200 100 100 100 100 100 50 50 200 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 100 100 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10

Boxes 0620CB 0625CB 0630CB 0640CB 0650CB 0660CB 0665CB 0670CB 0675CB 06100CB 06130CB 06150CB 0820CB 0825CB 0830CB 0835CB 0840CB 0845CB 0850CB 0860CB 0865CB 0870CB 0875CB 0880CB 0890CB 08100CB 08110CB 08120CB 08130CB 08150CB 08180CB 08200CB 1025CB 1030CB 1035CB 1040CB 1050CB 1065CB 1070CB 1075CB 1080CB 1090CB 10100CB 10110CB 10120CB 10130CB 10140CB 10150CB 10160CB 10180CB 10200CB 10220CB 10240CB 10260CB 10280CB 10300CB

Product Code

Thread x Length (mm)

Nut Socket Size (mm)

Qty

1250CB 1265CB 1275CB 1290CB 12100CB 12110CB 12120CB 12130CB 12140CB 12150CB 12160CB 12180CB 12200CB 12220CB 12240CB 12260CB 12280CB 12300CB 16100CB 16110CB 16150CB 16180CB 16200CB

M12 x 50 M12 x 65 M12 x 75 M12 x 90 M12 x 100 M12 x 110 M12 x 120 M12 x 130 M12 x 140 M12 x 150 M12 x 160 M12 x 180 M12 x 200 M12 x 220 M12 x 240 M12 x 260 M12 x 280 M12 x 300 M16 x 100 M16 x 110 M16 x 150 M16 x 180 M16 x 200

19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 24 24 24 24 24

25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5

M8 x 100 M8 x 110 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M10 x 180 M10 x 200 M12 x 75 M12 x 100 M12 x 130 M12 x 150 M12 x 200

13 13 13 13 17 17 17 17 17 17 17 19 19 19 19 19

40 35 30 24 28 24 20 20 14 12 10 14 14 12 10 5

M8 x 75 M8 x 100 M8 x 110 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M10 x 180 M12 x 75 M12 x 100 M12 x 130

13 13 13 13 13 17 17 17 17 17 17 19 19 19

4 4 3 3 2 3 2 2 2 2 2 2 2 2

Bags 08100CBB 08110CBB 08130CBB 08150CBB 1075CBB 10100CBB 10120CBB 10130CBB 10150CBB 10180CBB 10200CBB 1275CBB 12100CBB 12130CBB 12150CBB 12200CBB

Packs 0875CBP 08100CBP 08110CBP 08130CBP 08150CBP 1075CBP 10100CBP 10120CBP 10130CBP 10150CBP 10180CBP 1275CBB 12100CBP 12130CBP

BOLTS, SETS, NUTS AND WASHERS

ROOFING AND CABLE TRAY BOLT

ROOFING BOLT & NUT

Materials

Cross recess domed head bolt Available in:

ZINC

Manufactured with a large flat head, making it ideal for clamping thin sheet metal and wood

Product Code

Thread x Length (mm)

Nut (mm)

Qty

M5 x 12 M5 x 30 M6 x 08 M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 35 M6 x 40 M6 x 50 M6 x 60 M6 x 70 M6 x 80 M6 x 100 M8 x 25 M8 x 30 M8 x 40 M8 x 50 M8 x 60 M8 x 80 M8 x 100 M8 x 120

M5 M5 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8

200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50

Boxes 0512RB 0530RB 0608RB 0612RB 0616RB 0620RB 0625RB 0630RB 0635RB 0640RB 0650RB 0660RB 0670RB 0680RB 06100RB 0825RB 0830RB 0840RB 0850RB 0860RB 0880RB 08100RB 08120RB

Product Code

Thread x Length (mm)

Nut (mm)

Qty

M8 x 140 M8 x 160 M8 x 180 M8 x 200

M8 M8 M8 M8

50 50 50 50

M6 x 12 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 80

M6 M6 M6 M6 M6 M6 M6 M6

150 140 130 120 110 90 80 70

M6 x 12 M6 x 20 M6 x 25 M6 x 30 M6 x 40 M6 x 50 M6 x 60 M6 x 80

M6 M6 M6 M6 M6 M6 M6 M6

14 12 10 10 8 8 6 4

Boxes 08140RB 08160RB 08180RB 08200RB

Bags 0612RBB 0620RBB 0625RBB 0630RBB 0640RBB 0650RBB 0660RBB 0680RBB

Packs 0612RBP 0620RBP 0625RBP 0630RBP 0640RBP 0650RBP 0660RBP 0680RBP

CABLE TRAY BOLT & NUT

Materials

Combi recess domed head bolt Available in:

ZINC

Product Code

Thread x Length (mm)

Nut (mm)

Qty

M6 x 12 M6 x 16 M6 x 20 M6 x 25

M6 M6 M6 M6

200 200 200 200

Boxes Specifically designed to provide a rapid and secure fixing when erecting cable trays. The combi recess or hex flange nut can be used with a power tool.

CTB612 CTB616 CTB620 CTB625

THREADED BAR AND SETS

THREADED BAR -

ZINC

BOLTS, SETS, NUTS AND WASHERS

ZINC SET & NUT

A2 SS

Grade 4.8

Manufactured to DIN933 & 934 Available in:

ZINC

ZINC PLATED Product Code

Thread x Length (mm)

Qty

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

10 10 10 10 10 5

A fully threaded high tensile bolt used in a wide variety of applications.

1m Lengths 06TBZ 08TBZ 10TBZ 12TBZ 16TBZ 20TBZ

Product Code

M6 x 300 M8 x 300 M10 x 300 M12 x 300 M16 x 300

10 10 10 10 10

STAINLESS STEEL Product Code

Thread x Length (mm)

Qty

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

5 5 5 5 5 5

1m Bundles 06TBSS 08TBSS 10TBSS 12TBSS 16TBSS 20TBSS

HIGH TENSILE BAR Grade 8.8

Product Code

Thread x Length (mm)

Qty

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

10 10 10 10 10 5

1m Bundles 06TBZHT 08TBZHT 10TBZHT 12TBZHT 16TBZHT 20TBZHT

Socket Size (mm)

Qty

M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M8 x 70 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 25 M12 x 30 M12 x 35 M12 x 40 M12 x 50 M12 x 70 M12 x 100

10 10 10 10 13 13 13 13 13 17 17 17 17 17 17 19 19 19 19 19 19 19

130 115 100 70 60 55 45 40 30 35 32 28 25 20 16 25 23 22 20 18 14 10

M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M8 x 70 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 25 M12 x 30 M12 x 35 M12 x 40 M12 x 50 M12 x 70 M12 x 100

10 10 10 10 13 13 13 13 13 17 17 17 17 17 17 19 19 19 19 19 19 19

8 8 6 4 6 4 2 2 2 2 2 2 2 2 16 25 23 22 20 18 14 10

Bags 616SNZB 620SNZB 625SNZB 650SNZB 820SNZB 825SNZB 840SNZB 850SNZB 870SNZB 1025SNZB 1030SNZB 1040SNZB 1050SNZB 1070SNZB 10100SNZB 1225SNZB 1230SNZB 1235SNZB 1240SNZB 1250SNZB 1270SNZB 12100SNZB

300mm Lengths 06300TBZ 08300TBZ 10300TBZ 12300TBZ 16300TBZ

Thread x Length (mm)

Packs

ZINC

616SNZP 620SNZP 625SNZP 650SNZP 820SNZP 825SNZP 840SNZP 850SNZP 870SNZP 1025SNZP 1030SNZP 1040SNZP 1050SNZP 1070SNZP 10100SNZP 1225SNZP 1230SNZP 1235SNZP 1240SNZP 1250SNZP 1270SNZP 12100SNZP

BOLTS, SETS, NUTS AND WASHERS

STAINLESS SET & NUT Manufactured to DIN933 & 934 Available in:

A2 SS

Fully threaded metric set used in a wide variety of applications.

SETS

Product Code

Thread x Length Socket (mm) Size (mm)

Qty

Packs S616SSP S620SSP S625SSP S650SSP S820SSP S825SSP S840SSP S850SSP S1025SSP S1030SSP S1040SSP S1050SSP S1070SSP S10100SSP S1230SSP S1240SSP S1250SSP

M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M10 x 25 M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 30 M12 x 40 M12 x 50

10 10 10 10 13 13 13 13 17 17 17 17 17 17 19 19 19

8 8 6 4 6 4 2 2 2 2 2 2 2 2 2 2 2

Thread x Length Socket (mm) Size (mm)

Qty

STAINLESS SET

Manufactured to DIN933 Available in: Product Code

A2 SS

Thread x Length Socket (mm) Size (mm)

Qty

Product Code

200 200 200 200 200 200 200 200 100 100 100 100 100 50 50 100 100 100 100 100 50 50 50 50 50 50 50 50 50

S616SSX S620SSX S625SSX S630SSX S640SSX S650SSX S820SSX S825SSX S830SSX S835SSX S840SSX S850SSX S860SSX S880SSX S8100SSX S1020SSX S1025SSX S1030SSX S1035SSX S1040SSX S1050SSX S1060SSX S1070SSX S1080SSX S10100SSX S1230SSX S1240SSX S1250SSX S1260SSX

Boxes S616SS S620SS S625SS S630SS S640SS S650SS S820SS S825SS S830SS S835SS S840SS S850SS S860SS S880SS S8100SS S1020SS S1025SS S1030SS S1035SS S1040SS S1050SS S1060SS S1070SS S1080SS S10100SS S1230SS S1240SS S1250SS S1260SS

Bags M6 x 16 M6 x 20 M6 x25 M6 x 30 M6 x 40 M6 x 50 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 50 M8 x 60 M8 x 80 M8 x 100 M10 x 20 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 60 M10 x 70 M10 x 80 M10 x 100 M12 x 30 M12 x 40 M12 x 50 M12 x 60

10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 19 19 19 19

M6 X 16 M6 X 20 M6 X 25 M6 X 30 M6 X 40 M6 x 50 M8 X 20 M8 X 25 M8 X 30 M8 X 35 M8 X 40 M8 X 50 M8 X 60 M8 X 80 M8 X 100 M10 X 20 M10 X 25 M10 X 30 M10 X 35 M10 X 40 M10 X 50 M10 X 60 M10 X 70 M10 X 80 M10 X 100 M12 X 30 M12 X 40 M12 X 50 M12 X 60

10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 19 19 19 19

10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 10 10 10 10 10 5 5 5 5 5 10 10 10 5

SETS

BOLTS, SETS, NUTS AND WASHERS

ZINC SET

Manufactured to DIN933 ZINC

Available in: Product Code

Thread x Length Socket (mm) Size (mm)

Qty

Product Code

500 500 500 500 500 500 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 200 100 100 100 100 100 100 100 50 100 100 100

S1240Z S1245Z S1250Z S1260Z S1270Z S1275Z S1280Z S12100Z S12120Z S1625Z S1630Z S1635Z S1640Z S1645Z S1650Z S1655Z S1660Z S1665Z S1670Z S1675Z S1680Z S16100Z S2040Z S2045Z S2050Z S2055Z S2060Z S2065Z S2070Z S2075Z S2080Z S2090Z S20100Z

Boxes S612Z S616Z S620Z S625Z S630Z S635Z S640Z S650Z S816Z S820Z S825Z S830Z S835Z S840Z S850Z S860Z S870Z S880Z S8100Z S1020Z S1025Z S1030Z S1035Z S1040Z S1050Z S1060Z S1070Z S1075Z S1080Z S10100Z S1225Z S1230Z S1235Z

Thread x Length Socket (mm) Size (mm)

Qty

Boxes M6 x 12 M6 x 16 M6 x 20 M6 x 25 M6 x 30 M6 x 35 M6 x 40 M6 x 50 M8 x 16 M8 x 20 M8 x 25 M8 x 30 M8 x 35 M8 x 40 M8 x 50 M8 x 60 M8 x 70 M8 x 80 M8 x 100 M10 x 20 M10 x 25 M10 x 30 M10 x 35 M10 x 40 M10 x 50 M10 x 60 M10 x 70 M10 x 75 M10 x 80 M10 x 100 M12 x 25 M12 x 30 M12 x 35

10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 17 19 19 19

MIXED SETS, NUTS AND WASHERS SET - 500PCS Available in:

ZINC

Nuts, bolts and washer set in a zinc finish presented in a re-usable plastic carry case. Set contains 500 pieces.

Product Code

MIXBNWS

M12 x 40 M12 x 45 M12 x 50 M12 x 60 M12 x 70 M12 x 75 M12 x 80 M12 x 100 M12 x 120 M16 x 25 M16 x 30 M16 x 35 M16 x 40 M16 x 45 M16 x 50 M16 x 55 M16 x 60 M16 x 65 M16 x 70 M16 x 75 M16 x 80 M16 x 100 M20 x 40 M20 x 45 M20 x 50 M20 x 55 M20 x 60 M20 x 65 M20 x 70 M20 x 75 M20 x 80 M20 x 90 M20 x 100

19 19 19 19 19 19 19 19 19 24 24 24 24 24 24 24 24 24 24 24 24 24 30 30 30 30 30 30 30 30 30 30 30

100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20

Description

Size (mm)

Case Qty

Hex Nut DIN934 Hex Nut DIN934 Hex Nut DIN934 Form A Washer Form A Washer Form A Washer Hex Sets DIN933 Hex Sets DIN933 Hex Sets DIN933 Hex Sets DIN933 Hex Sets DIN933 Hex Sets DIN933 Hex Sets DIN933 Hex Sets DIN933 Hex Sets DIN933

M6 M8 M10 M6 M8 M10 M6 x 16 M6 x 20 M6 x 25 M8 x 30 M8 x 40 M8 x 50 M10 x 60 M10 x 70 M10 x 75

75 30 20 150 60 50 30 20 20 10 10 5 10 6 4

BOLTS, SETS, NUTS AND WASHERS

NUTS

NUT RANGE

A variety of zinc plated & stainless steel nuts. ZINC

Available in:

A2 SS

HEX FULL NUT A traditional nut used for all bolting and fastening applications. Zinc plated for internal use.

Use stainless steel for exterior or corrosive environments.

ZINC PLATED Product Code

STAINLESS STEEL

Size (mm)

Height (mm)

A/F (mm)

Qty

M4 M5 M6 M8 M10 M12 M16 M20

3.2 4 5 6.5 8 10 13 16

7 8 10 13 17 19 24 30

1,500 1,000 500 200 100 100 100 50

Boxes NH4Z NH5Z NH6Z NH8Z NH10Z NH12Z NH16Z NH20Z

M6 M8 M10 M12 M16 M20

5 6.5 8 10 13 16

10 13 17 19 24 30

600 300 130 90 45 20

M6 M8 M10 M12 M16 M20

5 6.5 8 10 13 16

10 13 17 19 24 30

40 30 20 10 4 2

Packs 6HNUTZP 8HNUTZP 10HNUTZP 12HNUTZP 16HNUTZP 20HNUTZP

Height (mm)

A/F (mm)

Qty

M4 M5 M6 M8 M10 M12 M16

3.2 4 5 6.5 8 10 13

7 8 10 13 17 19 24

1,000 1,000 500 200 100 100 100

M4 M5 M6 M8 M10 M12 M16

3.2 4 5 6.5 8 10 13

7 8 10 13 17 19 24

10 10 10 10 10 5 5

NH6SSP NH8SSP NH10SSP NH12SSP NH16SSP

M6 M8 M10 M12 M16

5 6.5 8 10 13

10 13 17 19 24

40 20 10 8 2

Product Code

Size (mm)

Height (mm)

A/F (mm)

Qty

M6 M8 M10 M12 M16

8 9.5 11.5 14 18

10 13 17 19 24

300 300 130 90 45

M6 M8 M10 M12 M16

8 9.5 11.5 14 18

10 13 17 19 24

20 10 4 4 2

Product Code

Boxes

Bags 6HNUTZB 8HNUTZB 10HNUTZB 12HNUTZB 16HNUTZB 20HNUTZB

Size (mm)

NH4SS NH5SS NH6SS NH8SS NH10SS NH12SS NH16SS

Bags NH4SSX NH5SSX NH6SSX NH8SSX NH10SSX NH12SSX NH16SSX

Packs

NYLON NUT (TYPE P) Also known as locking nuts designed to prevent the nut from loosening.

Bags

ZINC PLATED Product Code

Size (mm)

Height (mm)

A/F (mm)

Qty

M6 M8 M10 M12 M16

8 9.5 11.5 14 18

10 13 17 19 24

500 200 100 100 100

Boxes NP6Z NP8Z NP10Z NP12Z NP16Z

6NPB 8NPB 10NPB 12NPB 16NPB

Packs 6NPP 8NPP 10NPP 12NPP 16NPP

NUTS

BOLTS, SETS, NUTS AND WASHERS

NYLON NUT (TYPE T)

HEX DOME NUT

An economic nut thinner than Type P, designed to prevent the nut from loosening.

Ideal for protective or aesthetic uses.

ZINC PLATED Product Code

ZINC PLATED

Size (mm)

Height (mm)

A/F (mm)

Qty

M6 M8 M10 M12 M16

6 8 10 12 16

10 13 17 19 24

500 200 100 100 100

Boxes NT6Z NT8Z NT10Z NT12Z NT16Z

Product Code

ND6Z ND8Z ND10Z ND12Z ND16Z ND20Z

Qty

M6 M8 M10 M12 M16 M20

12 15 18 22 28 34

10 13 17 19 24 30

200 100 100 100 100 50

STAINLESS STEEL

Size (mm)

Height (mm)

A/F (mm)

Qty

M5 M6 M8 M10 M12 M16

4 6 8 10 12 16

8 10 13 17 19 24

1000 500 200 100 100 100

M5 M6 M8 M10 M12 M16

4 6 8 10 12 16

8 10 13 17 19 24

10 10 10 10 5 5

Boxes

Product Code

Size (mm)

Height (mm)

A/F (mm)

Qty

M5 M6 M8 M10 M12

10 12 15 18 22

8 10 13 17 19

500 200 100 100 100

M5 M6 M8 M10 M12

10 12 15 18 22

8 10 13 17 19

10 10 10 10 5

Size (mm)

Height (mm)

A/F (mm)

Qty

M6 M8 M10 M12 M16 M20

6 8 10 12 16 20

10 13 17 19 24 30

300 200 100 100 100 50

Boxes

Bags NT5SSX NT6SSX NT8SSX NT10SSX NT12SSX NT16SSX

A/F (mm)

Use stainless steel for exterior or corrosive environments.

STAINLESS STEEL

NT5SS NT6SS NT8SS NT10SS NT12SS NT16SS

Height (mm)

Boxes

Use stainless steel for exterior or corrosive environments.

Product Code

Size (mm)

SERRATED FLANGE NUT Designed to provide a larger clamping and locking force than a standard hex nut.

ZINC PLATED

ND5SS ND6SS ND8SS ND10SS ND12SS

Bags ND5SSX ND6SSX ND8SSX ND10SSX ND12SSX

Product Code

Boxes NF6Z NF8Z NF10Z NF12Z NF16Z NF20Z

BOLTS, SETS, NUTS AND WASHERS

NUTS & WASHERS

CONNECTOR NUT

WING NUT

For extending the length of threaded bar.

A light duty nut used to be fastened by hand where the nut is regularly removed.

ZINC PLATED Product Code

ZINC PLATED

Size (mm)

Height (mm)

A/F (mm)

Qty

M6 M8 M10 M12 M16 M20

18 24 30 36 48 60

10 13 17 19 24 30

200 100 100 100 50 25

Product Code

Boxes NC6Z NC8Z NC10Z NC12Z NC16Z NC20Z

Size (mm)

Qty

M6 M8 M10 M12 M16

300 200 100 100 100

Boxes NW6Z NW8Z NW10Z NW12Z NW16Z

WASHER RANGE

A variety of zinc plated & stainless steel washers. Available in:

ZINC

A2 SS

FORM A WASHER A traditional and commonly used washer for clamping and spacing applications.

Use stainless steel for exterior or corrosive environments.

ZINC PLATED Product Code

Size (mm)

Outer Thickness (mm) (mm)

STAINLESS STEEL Qty

Boxes WA4Z WA5Z WA6Z WA8Z WA10Z WA12Z WA14Z WA16Z WA20Z WA24Z

9 10 12.5 17 21 24 24 30 37 44

0.8 1 1.6 1.6 2 2.5 2.5 3 3 4

1,250 1,000 500 200 100 100 100 100 100 100

M6 M8 M10 M12 M16 M20

12.5 17 21 24 30 37

1.6 1.6 2 2.5 3 3

500 350 200 130 75 50

M6 M8 M10 M12 M16 M20

12.5 17 21 24 30 37

1.6 1.6 2 2.5 3 3

60 30 20 15 8 4

Packs 6WHAZP 8WHAZP 10WHAZP 12WHAZP 16WHAZP 20WHAZP

Size (mm)

Outer Thickness (mm) (mm)

Qty

Boxes M4 M5 M6 M8 M10 M12 M14 M16 M20 M24

Bags 6WHAZB 8WHAZB 10WHAZB 12WHAZB 16WHAZB 20WHAZB

Product Code

WA4SS WA5SS WA6SS WA8SS WA10SS WA12SS WA16SS

M4 M5 M6 M8 M10 M12 M16

9 10 12 16 20 24 30

0.8 1 1.6 1.6 2 2.5 3

1000 1000 1000 500 500 200 100

M4 M5 M6 M8 M10 M12 M16

9 10 12 16 20 24 30

0.8 1 1.6 1.6 2 2.5 3

50 50 20 20 10 10 10

M6 M8 M10 M12 M16

12 16 20 24 30

1.6 1.6 2 2.5 3

50 30 20 10 6

Bags WA4SSX WA5SSX WA6SSX WA8SSX WA10SSX WA12SSX WA16SSX

Packs WA6SSP WA8SSP WA10SSP WA12SSP WA16SSP

WASHERS

BOLTS, SETS, NUTS AND WASHERS

FORM B WASHER

SPRING WASHER

An economic washer thinner than a Form A, used for clamping and spacing applications.

Designed to prevent the nut from loosening. Also has square section.

ZINC PLATED Product Code

ZINC PLATED

Size (mm)

Outer (mm)

Thickness (mm)

Qty

M6 M8 M10 M12 M16 M20

12 17 21 24 30 27

0.8 1 1.25 1.6 2 2

500 200 100 100 100 100

Boxes WB6Z WB8Z WB10Z WB12Z WB16Z WB20Z

Qty

WSP6Z

M6 x 9.9 x 3.2 x 1.6

500

WSP8Z

M8 x 12.7 x 4 x 2

250

WSP10Z

M10 x 16 x 5 x 2.5

200

WSP12Z

M12 x 18 x 5 x 2.5

200

WSP16Z

M16 x 24.4 x 7 x 3.5

100

Boxes

Use stainless steel for exterior or corrosive environments.

SQUARE PLATE

STAINLESS STEEL Product Code

Size Hole x L x W x D (mm)

Product Code

Size (mm)

Outer Thickness (mm) (mm)

Qty

Designed to provide a large clamping surface and therefore spreading the load of a fastening.

Boxes WB6SS WB8SS WB10SS WB12SS WB16SS

M6 M8 M10 M12 M16

12 16 20 24 30

0.8 1 1.25 1.6 2

1000 500 500 200 100

Bags WB6SSX WB8SSX WB10SSX WB12SSX WB16SSX

M6 M8 M10 M12 M16

12 16 20 24 30

0.8 1 1.25 1.6 2

20 20 10 10 10

ZINC PLATED Product Code

Size Hole x L x W x D (mm)

Qty

WS8403Z

M8 x 40 x 40 x 3

100

WS8405Z

M8 x 40 x 40 x 5

100

WS10403Z

M10 x 40 x 40 x 3

100

WS10405Z

M10 x 40 x 40 x 5

100

WS10503Z

M10 x 50 x 50 x 3

100

WS12503Z

M12 x 50 x 50 x 3

100

WS16503Z

M16 x 50 x 50 x 3

100

1050WHSPZB

M10 x 50 x 50 x 3

1250WHSPZB

M12 x 50 x 50 x 3

1050WHSPZP

M10 x 50 x 50 x 3

1250WHSPZP

M12 x 50 x 50 x 3

Boxes

Bags

FORM C WASHER A wider diameter washer than the Form A & B used to increase the clamping area.

Packs

ZINC PLATED Product Code

Size (mm)

Outer Thickness (mm) (mm)

Qty

Boxes WC6Z WC8Z WC10Z WC12Z WC16Z WC20Z

M6 M8 M10 M12 M16 M20

14 21 24 28 34 39

1.6 1.6 2 2.5 3 4

500 200 100 100 100 100

BOLTS, SETS, NUTS AND WASHERS

WASHERS

PENNY/REPAIR WASHER A large diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out.

Use stainless steel for exterior or corrosive environments.

ZINC PLATED Product Code

Size (mm)

Outer Thickness (mm) (mm)

STAINLESS STEEL Qty

Boxes

Product Code

Size (mm)

Outer Thickness (mm) (mm)

Qty

Boxes

WP525Z

1.5

100

WP525SS

1.5

200

WP620Z

1.5

100

WP625SS

1.5

200

WP625Z

1.5

100

WP825SS

1.5

200

WP630Z

1.5

100

WP835SS

1.5

200

WP640Z

1.5

100

WP1025SS

M10

1.5

200

WP825Z

1.5

100

WP1035SS

M10

1.5

200

WP830Z

1.5

100

WP1235SS

M12

1.5

200

WP840Z

1.5

100

WP1025Z

M10

1.5

100

Bags

WP1030Z

M10

1.5

100

WP525SSX

1.5

WP1040Z

M10

1.5

100

WP625SSX

1.5

WP1240Z

M12

1.5

100

WP825SSX

1.5

WP835SSX

1.5

WP1025SSX

M10

1.5

Bags 625WHPZB

1.5

160

WP1035SSX

M10

1.5

825WHPZB

1.5

160

WP1235SSX

M12

1.5

1040WHPZB

M10

1.5

WP1240Z

M12

1.5

625WHPZP

1.5

640WHPZP

1.5

825WHPZP

1.5

840WHPZP

1.5

1040WHPZP

M10

1.5

Packs

ET!

S, D ET

500 PCS MIXED TRAY OF BOLTS, NUTS AND WASHERS SEE PAGE - 51

FIXINGS AND FASTENERS 58 - CABLE TIES 59 - HOOKS AND EYES 60 - SANITARY FIXINGS 62 - PIPE CLIPS

FIXINGS AND FASTENERS

CABLE TIES

CABLE TIES An economic and convenient solution designed to bundle and secure wires, cables, hoses and more. Available in multiple colours. Manufactured from nylon with operational temperature range of -40°c to 85°c.

NATURAL CABLE TIES

Product Code

BLACK CABLE TIES

Size (mm)

Tensile Strength

Qty

Product Code

2.5 x 100 3.6 x 140 3.6 x 200 4.5 x 180 4.5 x 200 4.5 x 300 4.8 x 160 4.8 x 200 4.8 x 250 4.8 x 300 4.8 x 370 4.8 x 430 7.6 X 250 7.6 x 300 7.6 x 370 7.6 x 540 9.0 x 530

8.10 18.20 18.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 54.40 54.40 54.40 54.40 79.40

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

25100CTB 36140CTB 36200CTB 45180CTN 45200CTN 45300CTN 48160CTB 48200CTB 48250CTB 48300CTB 48370CTB 48430CTB 76250CTB 76300CTB 76370CTB 76540CTB 90530CTB

Bags 25100CTN 36140CTN 36200CTN 45180CTN 45200CTN 45300CTN 48160CTN 48200CTN 48250CTN 48300CTN 48370CTN 48430CTN 76250CTN 76300CTN 76370CTN 76540CTN 90530CTN

Size (mm)

Tensile Strength

Qty

2.5 x 100 3.6 x 140 3.6 x 200 4.5 x 180 4.5 x 200 4.5 x 300 4.8 x 160 4.8 x 200 4.8 x 250 4.8 x 300 4.8 x 370 4.8 x 430 7.6 X 250 7.6 x 300 7.6 x 370 7.6 x 540 9.0 x 530

8.10 18.20 18.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 22.20 54.40 54.40 54.40 54.40 79.40

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Bags

COLOURED CABLE TIES

CABLE TIE PLUGS

A simple solution for attaching a cable tie to masonry or timber. Product Code

Size (mm)

Tensile Strength

Qty

Product Code

2.5 x 100

22.20

200*

840CTP

Bags 48200CTMIX

Drill Hole Size (mm)

Qty

8 x 40

100

Bags * 50 of each colour (Yellow, Green, Red & Blue)

Size (mm)

HOOKS & EYES

FIXINGS AND FASTENERS

HOOKS & EYES PICTURE HOOKS -

SCREW HOOKS -

BRASS

For hanging pictures. Product Code

Part

Qty

Wire (Ã&#x2DC; 0.92mm x 3.5m) No.2 Single Hook No.3 Double Hook No.2 & No.3 Mixed Hooks

1 12 4 8

A medium duty versatile solution for either hanging or attaching items to timber or masonry with the use of a plug.

Packs 35BWP 2PHSP 3PHDP MPHP

ROUND CUP HOOKS -

BRASS

Product Code

Dia. (mm)

Length (mm)

Colour

Qty

ZINC

3.0 3.0 3.0 4.0 4.0

19 25 25 38 38

Brass Brass White Brass White

15 10 6 5 4

SQUARE CUP HOOKS -

BRASS

Packs 19SHBP 25SHBP 25SHWP 38SHBP 38SHWP

Size (mm)

Gauge (mm)

Qty

60 80 100

12 12 12

4 3 2

Packs 60SHP 80SHP 100SHP

A light duty horizontal or vertical hook to be used into wood for hanging small items such as keys. Available in a brass or white finish. Product Code

ZINC

SCREW EYES -

ZINC

A medium duty versatile solution for either hanging or attaching items to timber or masonry with the use of a plug. Product Code

Size (mm)

Gauge (mm)

Qty

30 40 45 55

6 8 10 12

15 10 5 4

Packs 30SEP 40SEP 45SEP 55SEP

VINE EYES -

ZINC

A light duty horizontal hook to be used into wood for hanging small items.

There are multiple uses but commonly used to thread string or wire to train plants up fences or walls with the use of a plug.

Product Code

Dia. (mm)

Length (mm)

Qty

Product Code

3.0 4.0

25 38

16 8

75VEP 100VEP

Packs 25SQBP 38SQBP

Size (mm)

Gauge (mm)

Qty

4.3 x 75 4.3 x 100

16 16

4 2

Packs

FIXINGS AND FASTENERS

SANITARY FIXINGS Materials

SANITARY FIXINGS For fixing bathroom fixtures

Complete fixing kits for quick and easy installation of sanitary ware including wash basins, toilets and bidets. Suitable for use with a variety of solid building materials including concrete, natural stone, brick and timber.

BASIN KIT

PAN/BIDET KIT

Installation Guide

Designed to securely mount washbasins to a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the basin during installation. *Can also be used into wood without nylon plugs.

Designed for floor fixing pan/bidets into a variety of solid building materials. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. Flat caps for a concealed finish. *Can also be used into wood without nylon plugs.

LIGHT DUTY Product Code

Description

Size (mm)

Item Qty

Nylon Plugs Stud Screws Nylon Bushes Washers Hex Full Nuts

10 M8 x 100 M8 M8 M8

2 2 2 2 2

Bags LDBK

Description

Size (mm)

Item Qty

Nylon Plugs Stud Screws Nylon Bushes Washers Hex Full Nuts

14 M10 x 140 M10 M10 M10

2 2 2 2 2

Bags HDBK

Description

Size (mm)

Item Qty

Nylon Plug Hex Slotted Coach Screws Nylon Bushes White Flat Caps

10 6 x 80 6 18

2 2 2 2

Bags

HEAVY DUTY Product Code

Product Code

PBK

SANITARY FIXINGS

FIXINGS AND FASTENERS

CLOAKROOM BASIN KIT

ADJUSTABLE WC KIT

Installation Guide

Designed to fix cloakroom basins to a variety of solid building materials. *Can also be used into wood without nylon plugs.

Designed to fix WC pan/bidets to a variety of solid building materials. Fully adjustable for a quick easy installation. Countersunk nylon bushes designed to ensure no damage is done to the fixture during installation. *Can also be used into wood without nylon plugs.

Product Code

Description

Size (mm)

Item Qty

Basin Brackets Nylon Plugs Washers Hex Head Coach Screws

10 7 7 x 60

2 2 2 2

Bags CBK

Description

Size (mm)

Item Qty

Nylon Support Bracket Nylon Plug Hex Slotted Coach Screws Nylon Bushes Washers Screws Chrome Cover Caps

10 6 x 70 5 6 4.5 x 40 18

2 2 2 2 2 2 2

Bags

WCBK

FIXINGS AND FASTENERS

PIPE CLIPS

SINGLE OPEN PIPE CLIP The single open clip provides a strong and reliable snap fit pipe fixing, installed using either No.8 or No.10 woodscrews.

Designed and manufactured to accommodate today’s standard pipe sizes. Manufactured in the UK using a high quality polypropylene to prevent snapping and to give a secure fixing.

Product Code

Screw Size (mm)

Screw Size (Imp.)

Size (mm)

Qty

3.5 - 4.5 3.5 - 4.5 3.5 - 4.5

6, 7, 8 6, 7, 8 6, 7, 8

15 22 28

50 50 50

Bags

SINGLE QUICK LOCK PIPE CLIP A robust range of clips designed to withstand repeated opening and closing offering 360° degree pipe retention. The clips provide a very secure grip when the pipe is in place and the snap tight locking top offers complete security of the pipe. The high stand-off allows for lagging and heat circulation.

Product Code

SINGLE HINGED PIPE CLIP (MDPE) The single hinged clip is available in sizes to fit MDPE pipe, in blue to match the pipe colour.

Screw Size (mm)

Screw Size (Imp.)

Clip Size (mm)

Qty

Product Code

3.5 - 4.5 3.5 - 4.5 3.5 - 4.5

6, 7, 8 6, 7, 8 6, 7, 8

15 22 28

50 50 50

TMS20 TMS25 TMS35

Bags QS15 QS22 QS28

OPS15 OPS22 OP28

Screw Size (mm)

Screw Size (Imp.)

3.5 - 4.5 6, 7, 8 3.5 - 4.5 6, 7, 8 3.5 - 4.5 6, 7, 8, 10

Screw Size (mm)

Screw Size (Imp.)

Spacer Size (mm)

6, 7, 8

19 - 21 10 25 - 27.4 10 31.8 - 35 10

Zinc plated hardened and tempered nail suitable for all types of masonry.

Qty

Product Code

NCW10 NCW15 NCW22

Size (mm)

Qty

10 15 22

50 50 50

Bags

Bags 3.5 - 4.5

20 25 35

NAIL IN PIPE CLIP

The Quick Lock spacer is designed to suit all single clips to allow a greater stand-off where site conditions apply or where thicker lagging is used.

QSP1

To Fit Qty (mm)

Bags

QUICK LOCK SPACER

Product Code

Clip Size (mm)

PLASTERBOARD SCREWS & FIXINGS 64 - DRYWALL SCREWS 66 - COLLATED SCREWS 68 - ZIP-FIX 68 - MULTI-FIX STELLA 69 - METAL CAVITY ANCHORS 69 - SPRING TOGGLES 70 - SPEED PLUGS 70 - HAMMER-IN FIXINGS

DRYWALL SCREWS

PLASTERBOARD SCREWS & FIXINGS

DRYWALL SCREWS

Coarse, fine and reverse thread available Available in:

BLACK

ZINC

YELLOW

Our drywall screws have a bugle head to prevent damage or tearing of the plasterboard.

COARSE THREAD -

FINE THREAD -

BLACK

For board to timber

Used to secure plasterboard to timber stud work.

Used to secure plasterboard to drywall track and ceiling track systems (Max 0.7mm)

Product Code

Size (mm)

Qty

3.5 x 32 3.5 x 38

2,000 1,500

00032DRYT 00038DRYT

3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 42 3.5 x 50 4.2 x 65 4.2 x 75 4.8 x 100

1,000 1,000 1,000 1,000 1,000 1,000 500 500 500

3.5 x 32 3.5 x 38 3.5 x 50

400 350 250

00025DRY 00032DRY 00038DRY 00042DRY 00045DRY 00050DRY 00055DRY 00060DRY 00065DRY 00075DRY 00090DRY 00100DRY

Tubs

Size (mm)

Qty

3.5 x 32 3.5 x 38

2,000 1,500

3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 55 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 90 4.8 x 100

1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500

3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 100

200 200 200 200 200 200 200 200 200 200

3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 60 4.2 x 75 4.8 x 90

400 350 320 250 200 130 70

Tubs

00032DRYCT 00038DRYCT

Boxes

00025DRYC 00032DRYC 00035DRYC 00038DRYC 00042DRYC 00050DRYC 00065DRYC 00075DRYC 00100DRYC

Bags 00032DRYCB 00038DRYCB 00050DRYCB

COARSE THREAD -

YELLOW

For board to timber

Used to secure plasterboard to timber stud work. Product Code

Size (mm)

Qty

4.8 x 125 4.8 x 150

100 100

Boxes 00125DRYCY 00150DRYCY

BLACK

For board to light steel

Boxes of 200â&#x20AC;&#x2122;s 00025DRYS 00032DRYS 00038DRYS 00042DRYS 00045DRYS 00050DRYS 00060DRYS 00065DRYS 00075DRYS 00100DRYS

Bags 00032DRYB 00038DRYB 00042DRYB 00050DRYB 00060DRYB 00075DRYB 00090DRYB

DRYWALL SCREWS

FINE THREAD -

PLASTERBOARD SCREWS & FIXINGS

REVERSE THREAD -

ZINC

For board to steel (0.9mm)

Used to secure plasterboard to drywall track and ceiling track systems (Max 0.7mm) Product Code

Size (mm)

Qty

3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 45 3.5 x 50 3.5 x 55 3.5 x 60 4.2 x 65 4.2 x 75 4.8 x 90 4.8 x 100 4.8 x 125 4.8 x 150

1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 100 100

BLACK

For dense board to steel (0.9mm)

Product Code

Size (mm)

Qty

3.9 x 25 3.9 x 38 3.9 x 42

1,000 1,000 1,000

Boxes 00025DRYR 00038DRYR 00042DRYR

Boxes 00025DRYZ 00032DRYZ 00038DRYZ 00042DRYZ 00045DRYZ 00050DRYZ 00055DRYZ 00060DRYZ 00065DRYZ 00075DRYZ 00090DRYZ 00100DRYZ 00125DRYZ 00150DRYZ

SELF-DRILL -

DENSE BOARD -

BLACK

For dense board to timber

Product Code

Size (mm)

Qty

3.9 x 30 3.9 x 45 3.9 x 55

1,000 1,000 1,000

Boxes 00030DRYD 00045DRYD 00055DRYD

SHARP POINT WAFER HEAD -

ZINC

For board to steel (2.5mm)

ZINC

(Max Drill Thickness: 0.9mm)

Used to secure plasterboard to drywall track and ceiling track systems (Max 2.5-3.0mm) Product Code

Size (mm)

Qty

3.5 x 25 3.5 x 32 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 55 3.9 x 65 4.2 x 75 4.8 x 100 4.8 x 125

1,000 1,000 1,000 1,000 1,000 500 500 500 500 100

3.5 x 32 3.5 x 42

400 320

Product Code

Size (mm)

Qty

4.2 x 13

1,000

Boxes 08916WHSP

Boxes 00025PSDD 00032PSDD 00038PSDD 00042PSDD 00050PSDD 00055PSDD 00065PSDD 00075PSDD 00100PSDD 00125PSDD

Bags 00032PSDDB 00042PSDDB

SELF-DRILL WAFER HEAD -

ZINC

(Max Drill Thickness: 2.5mm) Product Code

Size (mm)

Qty

4.2 x 13 4.2 x 16 4.2 x 19 4.2 x 25

1,000 1,000 1,000 1,000

Boxes 08916WHSD 00016WHSD 00019WHSD 00025WHSD

COLLATED SCREWS

PLASTERBOARD SCREWS & FIXINGS

COLLATED SCREWS

A variety of collated screws to suit multiple applications. BLACK

Available in:

ZINC

YELLOW

A2 SS

EXTERIOR

DRYWALL COLLATED SCREWS COARSE THREAD -

BLACK

For board to timber

Used to secure plasterboard to timber stud work. Product Code

Size (mm)

Qty

3.5 x 35 3.5 x 38 3.5 x 45 3.5 x 55

1,000 1,000 1,000 800

3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 45 3.5 x 50 3.5 x 55 4.2 x 65 4.2 x 75

1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500

Tubs 00035CDRYTUB 00038CDRYTUB 00045CDRYTUB 00055CDRYTUB

Boxes 00025COLDYS 00032COLDYS 00035COLDYS 00038COLDYS 00045COLDYS 00050COLDYS 00055COLDYS 00065COLDYS 00075COLDYS

FINE THREAD -

SELF-DRILLING -

ZINC

For board to steel (0.9mm)

Used to secure plasterboard to drywall track and ceiling track systems (Max 0.9mm)

Used to secure plasterboard to drywall track and ceiling track systems (Max 2.5mm)

Product Code

Size (mm)

Qty

3.5 x 25 3.5 x 32 3.5 x 35 3.5 x 38 3.5 x 42 3.5 x 50 3.5 x 55

1,000 1,000 1,000 1,000 1,000 1,000 1,.000

Boxes 00025COLDZYS 00032COLDZYS 00035COLDZYS 00038COLDZYS 00042COLDZYS 00050COLDZYS 00055COLDZYS

ZINC

For board to steel (2.5mm)

Size (mm)

Qty

3.5 x 35 3.5 x 45 3.5 x 50

1,000 1,000 1,000

Boxes 00035COLLSD 00045COLLSD 00050COLLSD

COLLATED SCREWS

PLASTERBOARD SCREWS & FIXINGS

TIMBER CONSTRUCTION COLLATED SCREWS CLASSIC STAINLESS -

A2 SS

Timber to timber

Product Code

The Classic multi-purpose screw in stainless steel for added corrosion resistance.

SOLO -

Size (mm)

Qty

4.0 x 40 4.0 x 50

1,000 1,000

Size (mm)

Qty

4.2 x 40 4.2 x 50 4.2 x 55 4.2 x 60 4.2 x 70

1,000 1,000 1,000 500 500

Boxes 4040CLASSCOL 4050CLASSCOL

YELLOW

Timber to timber

Product Code

Boxes

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with a plastic plug.

FLOORING SCREW -

40SCOLY 50SCOLY 55SCOLY 60SCOLY 70SCOLY

YELLOW

Flooring to timber joists

Product Code

For attaching flooring sheets anbd planks to timber joist. Available with square and Philips recesses.

Size (mm)

Recess

Qty

4.2 x 55 4.2 x 55

Square Philips

1,000 1,000

Boxes 00055COLLF 00055COLLFPH

METAL CONSTRUCTION COLLATED SCREWS SELF-DRILLING WING TIP -

EXTERIOR

ZINC

For light section steel

Product Code

Countersunk head, winged with a self-drilling point. Specifically designed to attach wood to metal (Max 5mm)

Size (mm)

Plating

Qty

4.8 x 44 4.8 x 65

Exterior Zinc

1,000 1,000

Boxes 00044COLLW 4865COLLW

ZIP-FIX / STELLA PLASTERBOARD FIXINGS

PLASTERBOARD SCREWS & FIXINGS

ZIP-FIX

MULTI-FIX STELLA

Heavy duty installations into hollow walls

Materials

Installation Guide

A heavy duty hollow wall anchor for use in plasterboard, most hollow concrete block, cavity walls and ceilings. Pack includes both 40mm and 60mm screws for a wider variety of fixture thickness.

A highly effective universal anchor for fixing heavy loads to plasterboard cavities and solid materials.

Product Code

Screw Length (mm)

Screw FCH Ã&#x2DC; Size (mm) (mm)

MFT Qty (mm)

Bags ZIP6

40 & 60

FCH - Fixture Clearance Hole.. MFT = Max Fixture Thickness

DRYWALL BRACKET Designed for connecting dry lining systems to masonry walls and timber joists.

AVAILABLE ON PAGE - 115 68

Fixes into multiple materials

Product Code

Screw Size

Plug WT MFT Qty Length (mm) (mm)

Boxes STRED55 STBLACK65 STRED80 STBLACK90

M5 x 55 M5 x 65 M5 x 80 M5 x 90

49 59 49 59

3 - 18 18 - 30 3 - 18 18 - 30

15 12 40 38

25 25 25 25

WT = Wall Thickness. MFT = Max Fixture Thickness

METAL CAVITY ANCHOR / SPRING TOGGLE

PLASTERBOARD SCREWS & FIXINGS

METAL CAVITY ANCHOR

Materials

For a secure fixing into plasterboard

A cavity fixing that is ideal for hanging radiators, brackets, hand rails and shelving units. When installing multiple anchors a setting tool is recommended. Installation Guide

SETTING TOOL A handy and efficient tool used to set cavity anchors. TIMco Code: SETOOL Product Code

Screw Size (mm)

Drill Hole Ø

Grip Board

Qty

M4 x 45 M4 x 50 M4 x 65 M5 x 45 M5 x 60 M5 x 70 M6 x 60 M6 x 70

8 8 8 10 10 10 12 12

8-16 16-23 31-38 6-13 7-16 17-32 7-16 17-32

100 100 100 100 100 100 100 100

Product Code

Boxes 40038CA 40045CA 40060CA 50037CA 50052CA 50065CA 60052CA 60065CA

Screw Size (mm)

Drill Hole Ø

Grip Board

Qty

M5 x 45 M5 x 60 M6 x 70

10 10 12

6-13 7-16 17-32

70 60 40

M5 x 45 M5 x 60

10 10

6-13 7-16

4 3

Bags 50037CAB 50052CAB 60065CAB

Packs 50037CAP 50052CAP

SPRING TOGGLE

Materials

Ideal for ceiling installations A cavity fixing that is ideal for overhead installations. The wings spread the load over a wider area making them more suited for heavier loads. Product Thread Drill Screw Code Ø Hole Ø Length

WFT

Qty

Boxes Installation Guide

TOG350 TOG550 TOG575 TOG5100 TOG675

M3 M5 M5 M5 M6

11 14 14 14 18

50 50 75 100 75

30 20 45 70 45

100 100 100 100 100

M5 M5

14 14

50 75

20 45

55 50

Bags TOG550B TOG575B

WFT = Wall and Fixture Thickness

PLASTERBOARD SCREWS & FIXINGS

SPEED PLUG / HAMMER-IN FIXING

SPEED PLUG

Materials

Light duty applications into plasterboard.

A rapid light duty plasterboard fixing for use in a wide range of applications. Cross-recess head allows simple installation with a screw driver. Metal plugs come complete with screws. Installation Guide

METAL SPEED PLUG Comes with screws

NYLON SPEED PLUG Ideal for electrical installations Product Code

Plug Length Screw (mm) Ã&#x2DC; x L (mm)

MFT Qty (mm)

Tubs TBAZST

31.5

4.5 x 30

6.0

300

31.5

4.5 x 30

6.0

100

31.5

4.5 x 30

6.0

31.5

4.5 x 30

6.0

Boxes TBAZS Product Code

Plug Length (mm)

Qty

Bags TBAZSB

Boxes

Packs

TBAN*

100

TBAZSP

*6mm pre-drilled hole may be required in harder plasterboards.

MFT = Max Fixture Thickness

HAMMER-IN FIXING

Materials

Light duty fixtures into plasterboard A rapid light duty plasterboard fixing for use in a wide range of applications. Serrated point for easy hammering and quick installation. Supplied with screws. Installation Guide

Product Code

Screw (mm)

Plug (mm)

MFT (mm)

Qty

6.0

100

Boxes HPF30

4.0 x 30 11.0 x 30

MFT = Max Fixture Thickness

CONCRETE & MASONRY ANCHORS 72 - PLASTIC PLUGS 72 - EXPRESS NAILS 72 - FLANGE CLIP 73 - CEILING ANCHORS 73 - NAIL IN ANCHORS 73 - WIRE HANGER ANCHORS 74 - INSULATION FIXINGS 75 - NYLON FIXINGS 76 - MULTI-FIX RANGE 80 - THROUGH BOLTS 80 - DROP IN ANCHORS 81 - SHIELD ANCHORS 82 - EYES & HOOKS 83 - THREADED BAR 83 - CHEMICAL STUDS 84 - MULTI-FIX RESIN & ACCESSORIES

CONCRETE & MASONRY ANCHORS

PREMIUM PLASTIC PLUGS Improved pull-out loads

Installation Guide

PLUGS / EXPRESS NAILS / FLANGE CLIPS

EXPRESS NAIL

Light duty general purpose anchor

Materials

Large trade bags of premium plugs with improved pull-out loads when compared to standard plugs. Anti-rotation fins to prevent spinning. Loose and off the sprig for quicker and more convenient installation on site

An underestimated rapid hammer-set anchor for concrete and masonry, ideal for interior timberwork such as battens and frames. Installation Guide

2 Hammer express Product Code

L Screw Colour (mm) (Imp.)

Screw (mm)

Qty

Bags 34 42

6-10 10-14

3.5-4.8 1000 4.8-6.3 1000

PLASTIC PLUGS

All-purpose, cost effective fixing

00650EN 00660EN 00680EN 00870EN 00890EN 08110EN 08130EN 08150EN 08180EN 00660ENB 00680ENB 00890ENB 08110ENB 08150ENB

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications. It may be beneficial to reduce drill diameter in soft materials.

Installation Guide

L (mm)

Screw (Imp.)

Screw (mm)

Qty

25 30 36 48

4-8 6 - 10 8 - 12 12 - 15

3.0 - 4.5 3.5 - 5.0 4.5 - 6.0 6.0 - 8.0

100 100 100 40

Boxes

6 x 50 6 x 60 6 x 80 8 x 70 8 x 90 8 x 110 8 x 130 8 x 150 8 x 180 6 x 60 6 x 80 8 x 90 8 x 110 8 x 150

nail through fixture into hole.

MFT

FCH Ø

Qty

6 6 6 8 8 8 8 8 8

20 30 50 30 50 70 90 110 140

7 7 7 9 9 9 9 9 9

200 100 100 100 50 50 50 50 50

6 6 8 8 8

30 50 50 70 110

7 7 9 9 9

90 70 40 35 30

Bags

Materials

YPLUG Yellow RPLUG Red BPLUG Brown BLPLUG Blue

ØxL

Drill Hole Ø

Boxes

RPLUGPREM Red BPLUGPREM Brown

Product Colour Code

Product Code

VERTICAL FLANGE CLIP High strength fixing to steel

High strength vertical flange clip for fixing suspended wire and lighting to steel profiles. Product Code

Size (mm)

Qty

20 x 42

100

Bags VFC2042

CEILING / NAIL IN ANCHORS / WIRE HANGERS

CONCRETE & MASONRY ANCHORS

CEILING ANCHOR

Materials

Ideal for brackets on suspended ceilings Available in:

ZINC

A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. Made from steel making it ideal for overhead applications. Product Code

Installation Guide

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

6 x 40 6 x 65

6 6

5 30

6.5 6.5

100 100

Boxes 2 Push ceiling 3 Hammer anchor into hole.

wedge into anchor to secure.

0640CAM 0665CAM

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

NAIL IN ANCHOR

Materials

Light duty general purpose anchor Available in:

ZINC

A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. Note: Not suitable for overhead applications. Product Code

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

6 x 30 6 x 40 6 x 50 6 x 65

6 6 6 6

5 15 25 40

6.5 6.5 6.5 6.5

100 100 100 100

Boxes

Installation Guide

0630ZNA 0640ZNA 0650ZNA 0665ZNA

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

WIRE HANGERS

Materials

Mainly for fixing lightweight ceilings

Available in:

ZINC

Specifically designed for use in the suspended ceiling industry when securing suspension wires to concrete beams.

Installation Guide

Product Code

ØxL

Drill Hole Ø

Eye Ø

Qty

6 x 60

6.3

100

Boxes 0660WH

CONCRETE & MASONRY ANCHORS

INSULATION FIXING

Designed for fixing insulation Available in:

INSULATION FIXINGS & ACCESSORIES

LARGE METAL INSULATION DISC Specifically used with MIF

ZINC

METAL INSULATION FIXING Materials

Designed to anchor insulation material to concrete and masonry substrate materials.

Provides a larger surface area when using metal insulation fixings to hold lighter or softer insulation to masonry. Simply slide the fixing through, prior to installation. Product Code

Head Ø (mm)

Hole Size Ø

Qty

Bags Installation Guide

MID80

PLASTIC COVER CAP

Specifically used with MIF Product Code

ØxL

Drill Hole Ø

MFT

Qty

8 x 60 8 x 90 8 x 110 8 x 140 8 x 170 8 x 200

8 8 8 8 8 8

10 40 60 90 120 150

100 100 100 100 50 50

Bags MIF60 MIF90 MIF110 MIF140 MIF170 MIF200

MFT = Max Fixture Thickness

For aesthetics, where metal insulation fixing heads are left exposed after installation. Product Code

Head Ø (mm)

Qty

100

Bags

PLASTIC INSULATION FIXING

MIFC

METAL INSULATION DISC

Secures insulation to wood with screws Designed to anchor insulation material to concrete and masonry substrate materials. One piece impact resistant copolymer. Product Code

ØxL

Drill Hole Ø

MFT

Qty

8 x 50 8 x 70 8 x 90 8 x 110 8 x 130

8 8 8 8 8

1-20 20-40 50-60 70-80 90-100

100 100 100 100 100

Bags PIF50 PIF70 PIF90 PIF110 PIF130

MFT = Max Fixture Thickness

Large diameter head for use with screws to hold insulation material to battens. Also used for ceiling crack repairs. Product Code

Head Ø (mm)

Hole Size Ø

Qty

5.0

100

Bags MID35

NYLON FIXINGS

CONCRETE & MASONRY ANCHORS

NYLON FIXINGS

Materials

Fixes multiple applications into masonry/brick. Available in:

YELLOW

FRAME FIXING

HAMMER FIXING

Frame fixings are a versatile and reliable fixing. Antirotation lugs help prevent turning during installation.

A light duty hammer-set through fixing for masonry. Strong collar and made of tough durable nylon.

Installation Guide

Product Code

ØxL

Drill Hole Ø

MFT

Qty

8 x 80 8 x 100 8 x 120 10 x 80 10 x 100 10 x 120 10 x 140 10 x 160

8 8 8 10 10 10 10 10

40 60 80 30 50 70 90 110

100 100 100 100 100 100 100 100

8 x 80 8 x 100 10 x 100 10 x 120 10 x 140 10 x 160

8 8 10 10 10 10

40 60 50 70 90 110

50 40 30 25 20 15

8 x 80 8 x 100 10 x 100 10 x 120 10 x 140 10 x 160

8 8 10 10 10 10

40 60 50 70 90 110

5 4 3 2 2 2

Boxes 08080NFF 08100NFF 08120NFF 10080NFF 10100NFF 10120NFF 10140NFF 10160NFF

Packs 08080NFFP 08100NFFP 10100NFFP 10120NFFP 10140NFFP 10160NFFP

ØxL

Drill Hole Ø

MFT

Bit Size

Qty

5 x 30 5 x 50 6 x 40 6 x 50 6 x 60 6 x 70 6 x 80 8 x 60 8 x 80 8 x 100 8 x 120 8 x 140

5 5 6 6 6 6 6 8 8 8 8 8

5 25 15 25 35 45 55 20 40 60 80 100

PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ3 PZ3 PZ3 PZ3 PZ3

200 200 200 200 200 200 200 100 100 100 100 100

60040HFB 6 x 40 60060HFB 6 x 60 60080HFB 6 x 80 80100HFB 8 x 100

6 6 6 8

15 35 55 60

PZ2 PZ2 PZ2 PZ3

135 100 80 40

6 6 6 8

15 35 55 60

PZ2 PZ2 PZ2 PZ3

10 10 10 8

Boxes

Bags 08080NFFB 08100NFFB 10100NFFB 10120NFFB 10140NFFB 10160NFFB

Product Code

50030HF 50050HF 60040HF 60050HF 60060HF 60070HF 60080HF 80060HF 80080HF 80100HF 80120HF 80140HF

Bags

Packs 60040HFP 6 x 40 60060HFP 6 x 60 60080HFP 6 x 80 80100HFP 8 x 100

MFT = Max Fixture Thickness

FRAME ANCHOR

MFT = Max Fixture Thickness

Frame anchors are a traditional fixing for attaching doors and window frames to masonry. Product Code

Installation Guide

ØxL

Drill Hole Ø

MFT

Qty

8 x 100 8 x 120 8 x 140 10 x 100 10 x 120 10 x 140

8 8 8 10 10 10

50 70 90 50 70 90

100 100 100 100 100 100

Boxes 08100NFA 08120NFA 08140NFA 10100NFA 10120NFA 10140NFA

CONCRETE & MASONRY ANCHORS

MULTI-FIX RANGE

MULTI-FIX CONCRETE SCREW

Materials

Fixes into multiple materials YELLOW

ZINC

COUNTERSUNK -

YELLOW

Available in:

Double Countersunk with ribs

Installation Guide

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete and block. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings. Product Code

ØxL

Drill MFT Hole Ø

FCH Qty Ø

Boxes

Product Code

ØxL

Drill MFT Hole Ø

FCH Qty Ø

Packs

00040TCON 00050TCON 00060TCON 00070TCON 00080TCON 00090TCON 00100TCON 00110TCON 00120TCON 00130TCON 00150TCON 00180TCON 00200TCON

7.5 x 40 7.5 x 50 7.5 x 60 7.5 x 70 7.5 x 80 7.5 x 90 7.5 x 100 7.5 x 110 7.5 x 120 7.5 x 130 7.5 x 150 7.5 x 180 7.5 x 200

6 6 6 6 6 6 6 6 6 6 6 6 6

5 15 25 35 30 40 50 60 70 80 100 130 150

8 8 8 8 8 8 8 8 8 8 8 8 8

100 100 100 100 100 100 100 100 100 100 100 100 100

7.5 x 80 7.5 x 100 7.5 x 120 7.5 x 150

6 6 6 6

30 50 70 150

8 8 8 8

65 55 45 30

Bags 00080TCONB 00100TCONB 00120TCONB 00200TCONB

00080TCONP 00100TCONP 00120TCONP 00200TCONP

7.5 x 80 7.5 x 100 7.5 x 120 7.5 x 200

6 6 6 6

30 50 70 150

8 8 8 8

5 4 3 2

Cover Caps CAPW100 CAP0100 CAPM100

White Light Oak Mahogany

100 100 100

MIXED PACK -

YELLOW

Product Code

Size ØxL

Qty

7.5 x 80 7.5 x 100 7.5 x 120 6 x 160 - SDS Drill Bit T30 TIM Driver Bit

100 100 100 1 1

TCONPACK

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

PAN HEAD -

ZINC

For improved clamping

The same rapid light duty anchoring system screw, but zinc plated and with a pan head to improve clamping.

Installation Guide

Product Code

ØxL

FCH Qty Ø

Boxes 7580MFPAN 7.5 x 80 75100MFPAN 7.5 x 100 75120MFPAN 7.5 x 120

Drill MFT Hole Ø

6 6 6

30 50 70

8 8 8

100 100 100

MULTI-FIX RANGE

CONCRETE & MASONRY ANCHORS

MULTI-FIX MASONRY SCREW Fixes into multiple materials

COUNTERSUNK -

PAN HEAD -

ZINC

Ideal for fixing ironmongery

Product Code

ØxL

ZINC

Ideal for fixing ironmongery

Materials

Light duty fixing ideal for installing ironmongery to masonry. The countersunk head helps the screw sit flush.

Light duty fixing ideal for installing ironmongery to masonry. Pan head gives improved clamping.

Installation Guide

Drill Hole Ø

MFT

FCH Ø

Qty

Product Code

5 5 5 5

15 35 55 63

6.5 6.5 6.5 6.5

100 100 100 100

640MFPAN 6 x 40 660MFPAN 6 x 60 680MFPAN 6 x 80 6100MFPAN 6 x 100

Boxes

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

5 5 5 5

15 35 55 63

6.5 6.5 6.5 6.5

100 100 100 100

Boxes

640MFCSK 6 x 40 660MFCSK 6 x 60 680MFCSK 6 x 80 6100MFCSK 6 x 100

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

MULTI-FIX STELLA

Materials

Fixes into multiple materials

Product Code

Screw Size

Plug WT MFT Qty Length (mm) (mm)

Installation Guide

Boxes STRED55 STBLACK65 STRED80 STBLACK90

M5 x 55 M5 x 65 M5 x 80 M5 x 90

49 59 49 59

3 - 18 18 - 30 3 - 18 18 - 30

15 12 40 38

25 25 25 25

WT = Wall Thickness. MFT = Max Fixture Thickness

A highly effective universal anchor for fixing heavy loads to plasterboard cavities and solid materials.

CONCRETE & MASONRY ANCHORS

MULTI-FIX RANGE

MULTI-FIX BOLT

Materials

Fixes into multiple materials

HEX HEAD -

EXTERIOR

Installation Guide

Removable non expansion anchor

This stress free, non-expansion through fixing is the perfect solution for heavy duty anchoring into multiple materials, replacing the need for traditional anchors such as throughbolts, shield and drop-in anchors. Product Code

ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

6 x 50 6 x 75 6 x 100 6 x 130 6 x 150 8 x 60 8 x 75 8 x 100 8 x 130 8 x 150 10 x 60 10 x 75 10 x 100 10 x 130 10 x 150 12 x 75 12 x 100 12 x 130

6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12

20 45 55 85 105 20 35 60 90 110 10 25 50 80 100 15 40 70

8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 14 14 14

100 100 100 100 75 100 100 50 50 50 50 50 50 50 25 50 25 25

Boxes

Product Code

Drill Hole Ø

MFT

FCH Ø

Qty

12 x 150 12 x 200 16 x 100 16 x 150

12 12 16 16

90 140 20 70

14 14 18 18

25 25 10 10

6 x 50 8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100 10 x 150 12 x 75 12 x 100 12 x 130 12 x 150

6 8 8 8 10 10 10 10 12 12 12 12

20 20 35 60 10 25 50 100 15 40 70 90

8 10 10 10 12 12 12 12 14 14 14 14

64 30 26 18 14 12 8 12 8 6 6 6

Boxes

MF650 MF675 MF6100 MF6130 MF6150 MF860 MF875 MF8100 MF8130 MF8150 MF1060 MF1075 MF10100 MF10130 MF10150 MF1275 MF12100 MF12130

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

PAN HEAD -

MF12150 MF12200 MF16100 MF16150

Bags MF650B MF860B MF875B MF8100B MF1060B MF1075B MF10100B MF10150B MF1275B MF12100B MF12130B MF12150B

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

COUNTERSUNK -

EXTERIOR

For added clamping

Product Code

ØxL

Drill MFT Hole Ø

MF860P MF875P MF8100P MF1060P MF1075P MF10100P

EXTERIOR

For a flush finish

FCH Ø

Qty

10 10 10 12 12 12

100 100 50 50 50 50

Boxes

ØxL

Product Code

ØxL

Drill MFT Hole Ø

FCH Ø

Qty

10 10 10 12 12 12

100 100 50 50 50 50

Boxes 8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100

8 8 8 10 10 10

20 35 60 10 25 50

MF860C MF875C MF8100C MF1060C MF1075C MF10100C

8 x 60 8 x 75 8 x 100 10 x 60 10 x 75 10 x 100

8 8 8 10 10 10

20 35 60 10 25 50

TWO PART RESIN ANCHORING SYSTEM The Multi-Fix resin range offers an effective anchoring system for fixing into concrete and masonry. The Stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.

       

READY TO USE USES STANDARD TOOLS T-FLOW™ NOZZLE INCLUDED LOW EXTRUSION FORCE LESS WASTAGE NO LEAKAGE FASTER & EASIER TO USE CLOSE EDGE & AXIAL SPACING

FOR THE FULL RANGE OF RESIN AND ACCESSORIES

SEE PAGES 84 - 86

CONCRETE & MASONRY ANCHORS

THROUGHBOLT / DROP IN ANCHOR

THROUGHBOLT

Heavy duty applications into concrete Available in:

ZINC

Materials

Installation Guide

Drill Hole Ø

MFT

FCH Ø

Qty

M8 x 50 M8 x 65 M8 x 80 M8 x 100 M8 x 130 M10 x 65 M10 x 75 M10 x 100 M10 x 120 M12 x 80 M12 x 100 M12 x 120 M12 x 140 M12 x 180 M16 x 105 M16 x 125 M16 x 150 M16 x 175 M20 x 130 M20 x 160 M20 x 215

8 8 8 8 8 10 10 10 10 12 12 12 12 12 16 16 16 16 20 20 20

5 10 25 45 75 5 10 35 55 5 25 45 65 105 5 20 45 70 5 30 85

9 9 9 9 9 12 12 12 12 14 14 14 14 14 18 18 18 18 22 22 22

100 100 50 50 50 50 50 50 50 50 25 25 25 25 25 25 15 15 10 10 8

M8 x 50 M10 x 100 M12 x 100 M12 x 140 M12 x 180

8 10 12 12 12

5 35 25 65 105

9 12 14 14 14

40 18 12 10 8

0850TBP M8 x 50 10100TBP M10 x 100 12100TBP M12 x 100 12140TBP M12 x 140

8 10 12 12

5 35 25 65

9 12 14 14

4 2 2 2

Boxes

Packs

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete.

Materials

Product Thread Drill Code Ø Hole Ø

Anchor Length

FCH Ø

Qty

25 30 40 50

8 10 12 14

100 100 50 50

Anchor Length

FCH Ø

Qty

30 30

10 12

100 50

Boxes

Bags 0850TBB 10100TBB 12100TBB 12140TBB 12180TBB

ZINC

Installation Guide

Thread ØxL

0850TB 0865TB 0880TB 08100TB 08130TB 1065TB 1075TB 10100TB 10120TB 1280TB 12100TB 12120TB 12140TB 12180TB 16105TB 16125TB 16150TB 16175TB 20130TB 20160TB 20215TB

Metric threaded insert Available in:

The versatile through fixing for use in a wide range of anchoring applications into concrete.

Product Code

DROP IN ANCHOR

06WA 08WA 10WA 12WA

M6 M8 M10 M12

8 10 12 16

LIPPED ANCHOR

Product Thread Drill Code Ø Hole Ø

Boxes 08LWA 1030LWA

M8 M10

10 12

SETTING TOOL

Product Code

To Fit Anchor Size

Qty

M6 M8 M10 (40mm Length only) M12

1 1 1 1

Boxes 06WAS 08WAS 10WAS 12WAS

SHIELD ANCHORS

CONCRETE & MASONRY ANCHORS

SHIELD ANCHORS

Materials

Applications into masonry and concrete A traditional three segmented metal expansion anchor designed for anchoring into masonry and concrete.

LOOSE BOLT -

Product Code

PROJECTING BOLT -

YELLOW

Thread ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

M6 x 50 M6 x 65 M8 x 60 M8 x 75 M8 x 90 M10 x 70 M10 x 85 M10 x 110 M10 x 135 M12 x 90 M12 x 105 M12 x 120 M12 x 140

12 12 14 14 14 16 16 16 16 20 20 20 20

10 25 10 25 40 10 25 50 75 10 25 40 60

8 8 10 10 10 12 12 12 12 14 14 14 14

100 50 50 50 25 25 25 25 25 10 10 10 10

0610LSHB M6 x 50 0625LSHB M6 x 65 0810LSHB M8 x 60 0825LSHB M8 x 75 0840LSHB M8 x 90 1010LSHB M10 x 70 1025LSHB M10 x 85 1050LSHB M10 x 110 1075LSHB M10 x 135 1260LSHB M12 x 140

12 12 14 14 14 16 16 16 16 20

10 25 10 25 40 10 25 50 75 60

8 8 10 10 10 12 12 12 12 14

48 46 26 24 22 22 16 14 14 10

12 12 14 14 14 16 16 16 16 20

10 25 10 25 40 10 25 50 75 60

8 8 10 10 10 12 12 12 12 14

4 4 4 4 4 4 2 2 2 2

Boxes 0610LSH 0625LSH 0810LSH 0825LSH 0840LSH 1010LSH 1025LSH 1050LSH 1075LSH 1210LSH 1225LSH 1240LSH 1260LSH

Installation Guide

Product Code

YELLOW

Thread ØxL

Drill Hole Ø

MFT

FCH Ø

Qty

M6 x 110 M8 x 70 M8 x 85 M8 x 120 M10 x 85 M10 x 100 M10 x 130 M12 x 105 M12 x 120 M12 x 165

12 14 14 14 16 16 16 20 20 20

60 10 25 60 15 30 60 15 30 75

8 10 10 10 12 12 12 14 14 14

50 50 50 50 25 25 25 10 10 10

M8 x 85 M8 x 120 M10 x 85 M10 x 100 M10 x 130 M12 x 120

14 14 16 16 16 20

25 60 15 30 60 30

10 10 12 12 12 14

26 22 16 15 14 8

M8 x 85 M8 x 120 M10 x 85 M10 x 100 M10 x 130 M12 x 120

14 14 16 16 16 20

25 60 15 30 60 30

10 10 12 12 12 14

4 4 2 2 2 2

Boxes

Bags

Packs 0610LSHP M6 x 50 0625LSHP M6 x 65 0810LSHP M8 x 60 0825LSHP M8 x 75 0840LSHP M8 x 90 1010LSHP M10 x 70 1025LSHP M10 x 85 1050LSHP M10 x 110 1075LSHP M10 x 135 1260LSHP M12 x 140

0660PSH 0810PSH 0825PSH 0860PSH 1015PSH 1030PSH 1060PSH 1215PSH 1230PSH 1275PSH

Bags 0825PSHB 0860PSHB 1015PSHB 1030PSHB 1060PSHB 1230PSHB

Packs 0825PSHP 0860PSHP 1015PSHP 1030PSHP 1060PSHP 1230PSHP

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

CONCRETE & MASONRY ANCHORS

SHIELD ANCHOR ONLY -

SHIELD ANCHORS YELLOW

Product Code

Thread Ø

Shield Length

Qty

M6 M8 M10 M12

45 50 60 75

50 50 50 25

Boxes A three segmented expansion anchor used in concrete, brick or stone with most types of metric threaded component.

06SH 08SH 10SH 12SH

FORGED EYE AND HOOK Fixes into multiple materials

FORGED EYE -

YELLOW

Sold with or without shield anchor

Product Code

Materials

A useful threaded eye bolt for attaching ropes or cables. Sold with or without shield.

A useful threaded hook bolt for attaching ropes or cables. Sold with or without shield.

Thread Ø

Thread Length

Eye Ø

Qty

Product Code

M6 M8 M10 M12

50 60 73 95

8 10 12 16

50 50 50 25

06HOOK 08HOOK 10HOOK 12HOOK

Thread Ø

Thread Length

Eye Ø

Qty

Product Code

M6 M8

50 60

8 10

18 14

06HOOKB 08HOOKB

Qty

M6 M8 M10 M12

50 60 73 90

50 50 50 25

Thread Ø

Thread Length

Qty

M6 M8

50 60

20 16

M6 M8

50 60

8 10

2 2

06HOOKP 08HOOKP

M6 M8

50 60

2 2

Bags

Packs 06EYEP 08EYEP

Thread Length

SHIELD INCLUDED

Bags 06EYEB 08EYEB

Thread Ø

Boxes

SHIELD INCLUDED Product Code

YELLOW

Sold with or without shield anchor

Materials

Boxes 06EYE 08EYE 10EYE 12EYE

FORGED HOOK -

Packs

THREADED BAR / CHEMICAL ANCHOR STUDS

THREADED BAR -

ZINC

A2 SS

Grade 4.8

CONCRETE & MASONRY ANCHORS

CHEMICAL ANCHOR STUD Use with Multi-Fix Resin Available in:

Thread x Length (mm)

Qty

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

10 10 10 10 10 5

M6 x 300 M8 x 300 M10 x 300 M12 x 300 M16 x 300

10 10 10 10 10

1m Lengths 06TBZ 08TBZ 10TBZ 12TBZ 16TBZ 20TBZ

HOT DIPPED

External hex drive. Can be used with Multi-Fix resin. Embedment depth mark. Zinc plated and passivated (3-5 microns) or hot dipped galvanised finishes.

ZINC PLATED Product Code

ZINC

Chisel point prevents the rod turning when tightening.

300mm Lengths 06300TBZ 08300TBZ 10300TBZ 12300TBZ 16300TBZ

ZINC PLATED Product Code

STAINLESS STEEL Product Code

Thread x Length (mm)

Qty

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

5 5 5 5 5 5

Grade 8.8

M8 x 110 M10 x 130 M12 x 160 M16 x 190 M20 x 270

13 20 25 35 55

Clearance Qty Hole Ø

10 12 14 18 24

10 10 10 10 4

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

HOT DIPPED GALVANISED Product Code

HIGH TENSILE BAR -

MFT

Boxes 08110CS 10130CS 12160CS 16190CS 20270CS

1m Bundles 06TBSS 08TBSS 10TBSS 12TBSS 16TBSS 20TBSS

Thread Ø x Length

MFT

M8 x 110 M10 x 130 M12 x 160 M16 x 190 M20 x 270

13 20 25 35 55

Clearance Qty Hole Ø

Boxes ZINC

08110CSG 10130CSG 12160CSG 16190CSG 20270CSG

10 12 14 18 24

10 10 10 10 4

MFT = Max Fixture Thickness. FCH = Fixture Clearance Hole

Product Code

Thread x Length (mm)

Qty

M6 x 1000 M8 x 1000 M10 x 1000 M12 x 1000 M16 x 1000 M20 x 1000

10 10 10 10 10 5

1m Bundles 06TBZHT 08TBZHT 10TBZHT 12TBZHT 16TBZHT 20TBZHT

CONCRETE & MASONRY ANCHORS

MULTI-FIX RESIN

Use with chemical anchor studs Multi-Fix resin range offers an effective anchoring system for fixing into concrete and masonry. The stress-free nature of this solution gives greater flexibility when anchoring closer to a substrate edge such as balustrade installation.

VINYLESTER STYRENE FREE Materials

For enclosed, poorly ventilated, damp and wet environments. This high performance resin will give consistent results in a wide range of environments and conditions, whilst offering exceptional tensile strength.

POLYESTER STYRENE FREE RESIN

Product Code

Cartridge Size

Singles VESF410

410ml

POLYESTER RESIN Materials

European Technically Approved (ETA) low odour resin, for day to day nonsafety critical fixing. For enclosed or poorly ventilated environments.

An economic resin ideal for day to day non-safety critical applications that are well ventilated at the time of installation.

Cartridge Size

Product Code

Cartridge Size

Singles 300ml

PE310 PE410

300ml 410ml

Not suitable for damp conditions.

FIRE RATED

Materials

Singles PESF310

1501537

RESIN & SEALANT GUNS

CONCRETE & MASONRY ANCHORS

RESIN & SEALANT GUNS A range of guns used with syringe type cartridge for dispensing sealants, caulk, chemical resins and adhesives.

PROFESSIONAL GUN

MULTI-FIX RESIN CASE • 1x Professional Gun • 3x Hole Cleaning Brushes • 6x Mixer Nozzles • 4x Nylon Sleeves • 1x 190mm Blow Pump

A heavy duty sealant and caulking gun with a convenient hook end for hanging. Ergonomically designed for ease of use and a swivel action barrel for easy application into tight corners. Patented non-drip mechanism.

Ideal for on-site storage to keep your cartridges and ancillaries safe and in one place.

Product Code

Max Cartridge Dia. (mm)

Singles

To Fit Cartridge

Case

PROGUN

MFCASE300 MFCASE410

300ml 410ml

CHEMICAL RESIN GUN - 410ml

SKELETON GUN

A heavy duty resin applicator gun with twin 5mm gripper plates providing four point contact with the plunger rod. There is also a nondrip mechanism.

For dispensing sealants, caulk and adhesives from standard syringe type cartridges. Strengthened side plates and a 6mm gripper plate with a convenient hook end for hanging. Riveted front cap for added reinforcement.

Product Code

Cleaning pin included

Max Cartridge Dia. (mm)

Singles RESINGUN

Max Cartridge Dia. (mm)

Singles 64

SKELGUN

CONCRETE & MASONRY ANCHORS

RESIN ACCESSORIES

RESIN ACCESSORIES The cleaning of drill holes prior to injecting resin is essential in order to ensure a safe fixing. Our range of accessories include the tools required to ensure effective hole cleaning. Nylon Sleeves assist with fixing into hollow block or brick and spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be used for subsequent applications.

MIXING NOZZLES

BLOW-OUT PUMP

Product Code

Bag Qty

Bag 12

PLASTIC SLEEVES

Qty

280

Thread Socket Hole Ø Ø x L (mm) Ø x L (mm) (mm)

M8 - M10 M8 - M10

16 x 85 16 x 130

PUMP

HOLE CLEANING BRUSHES

Qty

16 16

Product Code

Size (mm)

Qty

13 15 22

10 10 10

Bags

Bags 1585CPS 15130CPS

Size (mm)

Singles

PESF310

Product Code

100 100

B13 B15 B22

Resin

Accessory Case for 300ml

IDEAL FOR ON-SITE STORAGE TO KEEP YOUR CARTRIDGES & ANCILLARIES SAFE & IN ONE PLACE.

SEE PAGE 85 86

COLLATED & LOOSE NAILS 88 - CLIPPED HEAD NAILS 89 - BRAD NAILS 90 - FUEL CELLS 90 - POLYMER HEADED 91 - BRIGHT NAILS 95 - GALVANISED NAILS 100 - SHERARDISED NAILS 102 - STAINLESS STEEL NAILS 103 - COPPER NAILS 103 - COPPER DISC RIVETS 103 - COPPER STRAPS 105 - ALUMINIUM NAILS 105 - MASONRY NAILS

COLLATED & LOOSE NAILS

FIRMAHOLD NAILS

FIRMAHOLD CLIPPED HEAD NAILS For structural applications Available in:

BRIGHT

FIRMA GALV

FIRMA GALV +

HOT DIPPED GALV

A2 STAINLESS STEEL

Tested by

For use in structural applications using high quality paper collation for reduced nail jams. Various levels of rust protection to comply with building regulation and meet with all service classes.

CLIPPED HEAD - WITH GAS Product Code

Dia.

Length (mm)

Coating Type

CLIPPED HEAD - NO GAS

Shank Type

Product Code

Boxes of 3,300 + 3 Fuel Cells

Dia.

Length (mm)

Coating Type

Shank Type

Boxes of 3,300

CBRT50G

2.8

Bright

Ringed

CBRT50

2.8

Bright

Ringed

CFGT50G

2.8

FirmaGalv

Ringed

CFGT50

2.8

FirmaGalv

Ringed

CPLT50G

2.8

FirmaGalv +

Ringed

CPLT50

2.8

FirmaGalv +

Ringed

CHDT50G

2.8

HDGV

Ringed

CHDT50

2.8

HDGV

Ringed

CBRT63G

2.8

Bright

Ringed

CBRT63

2.8

Bright

Ringed

CFGT63G

2.8

FirmaGalv

Ringed

CFGT63

2.8

FirmaGalv

Ringed

CPLT63G

2.8

FirmaGalv +

Ringed

CPLT63

2.8

FirmaGalv +

Ringed

CHDT63G

2.8

HDGV

Ringed

CHDT63

2.8

6.3

HDGV

Ringed

CPLT63RG

3.1

FirmaGalv +

Ringed

CPLT63R

3.1

FirmaGalv +

Ringed

Boxes of 2,200 + 2 Fuel Cells

Boxes of 2,200

CBRT75G

3.1

Bright

Ringed

CBRT75

3.1

Bright

Ringed

CFGT75G

3.1

FirmaGalv

Ringed

CFGT75

3.1

FirmaGalv

Ringed

CPLT75G

3.1

FirmaGalv +

Ringed

CPLT75

3.1

FirmaGalv +

Ringed

CHDT75G

3.1

HDGV

Ringed

CHDT75

3.1

HDGV

Ringed

CBRT90G

3.1

Bright

Plain

CBRT90

3.1

Bright

Plain

CFGT90G

3.1

FirmaGalv

Plain

CFGT90

3.1

FirmaGalv

Plain

CPLT90G

3.1

FirmaGalv +

Plain

CPLT90

3.1

FirmaGalv +

Plain

CHDT90G

3.1

HDGV

Plain

CHDT90

3.1

HDGV

Plain

CPLT90PG

3.1

FirmaGalv +

Part Ring

Boxes of 1,100 + 1 Fuel Cell

Boxes of 1,100 CFGR50

2.8

FirmaGalv

Ringed

CFGR50G

2.8

FirmaGalv

Ringed

CSSR50

2.8

A2 SS

Ringed

CFGR63G

2.8

FirmaGalv

Ringed

CFGR63

2.8

FirmaGalv

Ringed

CFGR75G

3.1

FirmaGalv

Ringed

CSSR63

2.8

A2 SS

Ringed

CFGR90G

3.1

FirmaGalv

Plain

CFGR75

3.1

FirmaGalv

Ringed

CPLR63RG 3.1

FirmaGalv +

Ringed

CFGR90

3.1

FirmaGalv

Plain

CSSR50G

2.8

A2 SS

Ringed

CSSR63G

2.8

A2 SS

Ringed

*Notified Test Laboratory 2389 for EN 14592 Timber Structures - Dowel Type Fasteners - Requirements

FIRMAHOLD NAILS

COLLATED & LOOSE NAILS

FIRMAHOLD BRAD NAILS Perfect for indoor use Available in:

GALV.

A2 STAINLESS STEEL

Ideal for internal applications such as skirting, architrave, tongue and groove fixing, with a T head for a concealed finish. Also available in stainless steel for hardwood applications.

16 GAUGE 20° ANGLED BRADS WITH GAS Product Code

Gauge

Length (mm)

Coating Nails Type Per Strip

Boxes of 2,000 + 2 Fuel Cells ABG1632G ABG1638G ABG1645G ABG1650G ABG1664G ABSS1638G ABSS1650G

16 16 16 16 16 16 16

32 38 45 50 64 38 50

Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS

Gauge

Length (mm)

Coating Nails Type Per Strip

Boxes of 2,000 ABG1632 ABG1638 ABG1645 ABG1650 ABG1664 ABSS1638 ABSS1650

16 16 16 16 16 16 16

Gauge

Length (mm)

Coating Type

Nails Per Strip

Boxes of 2,000 + 2 Fuel Cells 50 50 50 50 50 50 50

16 GAUGE 20° ANGLED BRADS NO GAS Product Code

16 GAUGE STRAIGHT BRADS WITH GAS Product Code

BG1619G BG1625G BG1632G BG1638G BG1645G BG1650G BG1664G BSS1638G BSS1650G

16 16 16 16 16 16 16 16 16

19 25 32 38 45 50 64 38 50

Galv. Galv. Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS

50 50 50 50 50 50 50 50 50

16 GAUGE STRAIGHT BRADS NO GAS Product Code

Gauge

Length (mm)

Coating Type

Nails Per Strip

19 25 32 38 45 50 64 38 50

Galv. Galv. Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS

50 50 50 50 50 50 50 50 50

Boxes of 2,000 32 38 45 50 64 38 50

Galv. Galv. Galv. Galv. Galv. A2 SS A2 SS

50 50 50 50 50 50 50

BG1619 BG1625 BG1632 BG1638 BG1645 BG1650 BG1664 BSS1638 BSS1650

16 16 16 16 16 16 16 16 16

18 GAUGE STRAIGHT BRADS NO GAS Product Code

Gauge

Length (mm)

Coating Nails Type Per Strip

Boxes of 5,000 BG1816 BG1819 BG1825 BG1832 BG1838 BG1845 BG1850

18 18 18 18 18 18 18

16 19 25 32 38 45 50

Galv. Galv. Galv. Galv. Galv. Galv. Galv.

100 100 100 100 100 100 100

FUEL CELLS & POLYMER HEADED NAILS COLLATED & LOOSE NAILS FUEL CELLS / POLYMER NAILS

FUEL CELLS

For use with framing and finishing nail guns Manufactured to European standards. Cleaned propane and butane gas for improved the working environment. Fully synthetic oil for reduced carbon deposition. High quality propellant to prevent leakage and increase shelf life. Gas filled in accordance with European Regulations (75/324/EWG). Product Code

Description

Size (ml)

Qty

Framing Nailer Fuel Cell Finishing Nailer Fuel Cell

80 30

2 2

Packs CFC BFC

BFC

CFC

POLYMER HEADED NAILS AND PINS Securing fascia, soffit and window boards Available in:

White

A4 STAINLESS STEEL

Oak

Mahogany

Black

Coloured poly headed marine grade stainless steel pin or nail designed to secure fascia, soffit and window boards.

POLYMER HEADED NAILS

POLYMER HEADED PINS

Product Code

Finish

Size (mm)

Head Ø (mm)

Box Qty

Product Code

White White Oak Mahogany Black White Mahogany Black

40 50 50 50 50 65 65 65

12 12 12 12 12 12 12 12

100 100 100 100 100 100 100 100

PP25M PP25W PP25BEIGE PP30W PP30O PP30BR PP30BL PP40W PP40O PP40BR PP40BL

Boxes PN40W PN50W PN50O PN50BR PN50BL PN65W PN65BR PN65BL

Size (mm)

Shank Ø Head Ø (mm) (mm)

Box Qty

Boxes CP30

Size (mm)

Head Ø (mm)

Box Qty

Mahogany White Beige White Oak Mahogany Black White Oak Mahogany Black

25 25 25 30 30 30 30 40 40 40 40

6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4

250 250 250 250 250 250 250 250 250 250 250

Boxes

CLAD PINS

Product Code

Finish

2.1

250

BRIGHT LOOSE NAILS BRIGHT LOOSE NAILS COLLATED & LOOSE NAILS

BRIGHT LOOSE NAILS Bright nails are suitable for indoor applications or where the moisture content of the timber will not exceed 12%. They conform to Eurocode 5 and Service class 1. Available in a wide variety of packaging options and weights to suit any job size.

BRIGHT ANNULAR RINGSHANK NAILS For additional strength Also available in:

SHERARDISED

A2 STAINLESS STEEL

Annular rings provide additional holding power, where increased grip is required. Product Code

Length (mm)

Shank Dia. (mm)

Qty

Product Code

Length (mm)

Shank Dia. (mm)

Qty

BAR25P

2.00

150

BAR20LB

BAR50P

2.65

2.00

2.5kg

BAR25LB

2.00

BAR65P

3.35

2.5kg

BAR30LB

2.36

2.5kg

BAR40LB

2.36

2.5kg

Packs

2.5kg Bags

500g Bags BAR20MB

2.00

500g

BAR50LB

2.65

2.5kg

BAR25MB

2.00

500g

BAR65LB

3.35

2.5kg

BAR30MB

2.36

500g

BAR75LB

3.75

2.5kg

BAR40MB

2.36

500g

2.5kg Tubs

BAR50MB

2.65

500g

BAR20T

2.00

2.5kg

BAR65MB

3.35

500g

BAR25T

2.00

2.5kg

BAR75MB

3.75

500g

BAR30T

2.36

2.5kg

BAR40T

2.36

2.5kg

1kg Bags BAR20B

2.00

1kg

BAR50T

2.65

2.5kg

BAR25B

2.00

1kg

BAR65T

3.35

2.5kg

BAR30B

2.36

1kg

BAR75T

3.75

2.5kg

BAR40B

2.36

1kg

25kg Bulk Boxes

BAR50B

2.65

1kg

BAR20

2.00

25kg

BAR65B

3.35

1kg

BAR25

2.00

25kg

BAR75B

3.75

1kg

BAR30

2.36

25kg

BAR40

2.36

25kg

BAR50

2.65

25kg

BAR65

3.35

25kg

BAR75

3.75

25kg

COLLATED & LOOSE NAILS

BRIGHT LOOSE NAILS

BRIGHT ROUND WIRE NAILS Full round head for clamping Also available in:

GALVANISED

A2 STAINLESS STEEL

Used for general interior first-fix applications.

Product Code

Length (mm)

Shank Dia. (mm)

Qty

Product Code

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

500g 500g 500g 500g 500g 500g 500g

BRW40T BRW50T BRW65T BRW75T BRW100T BRW125T BRW150T

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

1kg 1kg 1kg 1kg 1kg 1kg 1kg

BRW40LT BRW50LT BRW65LT BRW75LT BRW100LT

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

500g Bags BRW40MB BRW50MB BRW65MB BRW75MB BRW100MB BRW125MB BRW150MB

Qty

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 75 100

2.65 2.65 3.35 3.75 4.50

10kg 10kg 10kg 10kg 10kg

2.65 2.65 3.35 3.75 4.50 5.60 6.00

25kg 25kg 25kg 25kg 25kg 25kg 25kg

10kg Tubs

2.5kg Bags BRW40LB BRW50LB BRW65LB BRW75LB BRW100LB BRW125LB BRW150LB

Shank Dia. (mm)

2.5kg Tubs

1kg Bags BRW40B BRW50B BRW65B BRW75B BRW100B BRW125B BRW150B

Length (mm)

25kg Bulk Boxes BRW40 BRW50 BRW65 BRW75 BRW100 BRW125 BRW150

40 50 65 75 100 125 150

MULTI-TOOL BLADES Designed to be compatible with all leading Multi-Tool machines for cutting, sanding, grinding and scraping a wide variety of materials.

SEE PAGES 155-157 92

BRIGHT LOOSE NAILS

COLLATED & LOOSE NAILS

BRIGHT PANEL PINS

For light duty applications Also available in:

SHERARDISED

This light weight nail provides a concealed finish, which makes it perfect for light duty applications such as cabinet making. Product Code

Length (mm)

Shank Dia. (mm)

Qty

Product Code

25 30 40 50

1.60 1.60 1.60 1.60

250 200 100 50

BPP25LB BPP30LB BPP40LB BPP50LB

20 25 30 40 50

1.60 1.60 1.60 1.60 1.60

500g 500g 500g 500g 500g

BPP25T BPP30T BPP40T BPP50T

Packs PPB25P PPB30P PPB40P PPB50P

Qty

25 30 40 50

1.60 1.60 1.60 1.60

2.5kg 2.5kg 2.5kg 2.5kg

25 30 40 50

1.60 1.60 1.60 1.60

2.5kg 2.5kg 2.5kg 2.5kg

1.60 1.60 1.60 1.60

25kg 25kg 25kg 25kg

2.5kg Tubs

1kg Bags BPP25B BPP30B BPP40B BPP50B

Shank Dia. (mm)

2.5kg Bags

500g Bags BPP20MB BPP25MB BPP30MB BPP40MB BPP50MB

Length (mm)

25 30 40 50

1.60 1.60 1.60 1.60

1kg 1kg 1kg 1kg

25kg Bulk Boxes BPP25 BPP30 BPP40 BPP50

25 30 40 50

BRIGHT OVAL NAILS

Where appearance is important Product Code

Generally used for second-fix applications, such as skirting or architrave. Product Code

Qty

40 50 65 75 100

500g 500g 500g 500g 500g

BON40T BON50T BON65T BON75T BON100T

40 50 65 75 100

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 75 100

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 75 100

1kg 1kg 1kg 1kg 1kg

BON40 BON50 BON65 BON75 BON100

40 50 65 75 100

25kg 25kg 25kg 25kg 25kg

2.5kg Tubs

1kg Bags BON40B BON50B BON65B BON75B BON100B

Qty

2.5kg Bags BON40LB BON50LB BON65LB BON75LB BON100LB

Length (mm)

500g Bags BON40MB BON50MB BON65MB BON75MB BON100MB

Length (mm)

25kg Bulk Boxes

COLLATED & LOOSE NAILS

BRIGHT LOOSE NAILS

BRIGHT ROUND LOST HEAD NAILS For a concealed finish Also available in:

A2 STAINLESS STEEL

Product Code

Length (mm)

Shank Dia. (mm)

Qty

40 50 65

2.36 3.00 3.35

2.5kg 2.5kg 2.5kg

40 50 65

2.36 3.00 3.35

2.5kg 2.5kg 2.5kg

2.36 3.00 3.35

25kg 25kg 25kg

2.5kg Bags Product Code

Length (mm)

Shank Dia. (mm)

Qty

BLH40LB BLH50LB BLH65LB

40 50 65

2.36 3.00 3.35

500g 500g 500g

BLH40T BLH50T BLH65T

40 50 65

2.36 3.00 3.35

1kg 1kg 1kg

BLH40 BLH50 BLH65

500g Bags BLH40MB BLH50MB BLH65MB

2.5kg Tubs

1kg Bags BLH40B BLH50B BLH65B

25kg Bulk Boxes

BRIGHT CUT FLOORING BRADS Perfect for floor boards

40 50 65

BRIGHT CUT CLASP NAILS Provides a traditional fixing

Product Code

Length (mm)

Qty

50 65 75 100

500g 500g 500g 500g

50 65 75 100

1kg 1kg 1kg 1kg

50 65 75 100

2.5kg 2.5kg 2.5kg 2.5kg

50 65 75 100

2.5kg 2.5kg 2.5kg 2.5kg

50 65 75 100

25kg 25kg 25kg 25kg

500g Bags BCN50MB BCN65MB BCN75MB BCN100MB Product Code

1kg Bags

Length (mm)

Qty

CFB50MB

500g

CFB65MB

500g

2.5kg Bags BCN50LB BCN65LB BCN75LB BCN100LB

500g Bags

1kg Bags CFB50B

1kg

CFB65B

1kg

CFB50LB

2.5kg

CFB65LB

2.5kg

CFB50T

2.5kg

CFB65T

2.5kg

CFB50

25kg

CFB65

25kg

2.5kg Bags

2.5kg Tubs

25kg Bulk Boxes

BCN50B BCN65B BCN75B BCN100B

2.5kg Tubs BCN50T BCN65T BCN75T BCN100T

25kg Bulk Boxes BCN50 BCN65 BCN75 BCN100

GALVANISED LOOSE NAILS

COLLATED & LOOSE NAILS

GALVANISED LOOSE NAILS Galvanised nails give medium duty rust protection and conform to Eurocode 5 and Service class 2. Class 2 nails are for covered exterior applications where the timber is protected form direct wetting or where the timber moisture content does not exceed 20%. Available in a wide variety of packaging options and weights to suit any job size.

GALV. ROUND WIRE NAILS Full round head for clamping Also available in:

BRIGHT

A2 STAINLESS STEEL

Used for all types of first-fix applications. Product Code

Length (mm)

Shank Dia. (mm)

Qty

40 50 65 75 100 125 150

2.65 2.65 3.35 3.75 4.50 5.60 6.00

75 50 40 25 15 10 8

40 50 65 65 75 100 125 150

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

500g 500g 500g 500g 500g 500g 500g 500g

40 50 65 65 75 100 125 150

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg

40 50 65

2.65 2.65 2.65

2.5kg 2.5kg 2.5kg

Packs GRW40P GRW50P GRW65P GRW75P GRW100P GRW125P GRW150P

1kg Bags GRW40B GRW50B GRW26565B GRW65B GRW75B GRW100B GRW125B GRW150B

2.5kg Bags GRW40LB GRW50LB GRW26565LB

Length (mm)

Shank Dia. (mm)

Qty

65 75 100 125 150

3.35 3.75 4.50 5.60 6.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 65 75 100 125 150

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

40 50 65 65 75 100

2.65 2.65 2.65 3.35 3.75 4.50

10kg 10kg 10kg 10kg 10kg 10kg

2.65 2.65 2.65 3.35 3.75 4.50 5.60 6.00

25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg

2.5kg Bags

500g Bags GRW40MB GRW50MB GRW26565MB GRW65MB GRW75MB GRW100MB GRW125MB GRW150MB

Product Code GRW65LB GRW75LB GRW100LB GRW125LB GRW150LB

2.5kg Tubs GRW40T GRW50T GRW26565T GRW65T GRW75T GRW100T GRW125T GRW150T

10kg Tubs GRW40LT GRW50LT GRW26565LT GRW65LT GRW75LT GRW100LT

25kg Bulk Boxes GRW40 GRW50 GRW26565 GRW65 GRW75 GRW100 GRW125 GRW150

40 50 65 65 75 100 125 150

COLLATED & LOOSE NAILS

GALVANISED LOOSE NAILS

GALV. SQUARE TWIST NAILS Use with ironmongery Also available in:

SHERARDISED

Mainly used with types of builders metal work. The twisted shank provides additional grip. Product Code

Length (mm)

Shank Dia. (mm)

Qty

Product Code

30 40

3.75 3.75

500g 500g

GST30T GST40T

30 40

3.75 3.75

1kg 1kg

GST30LT

30 40

3.75 3.75

2.5kg 2.5kg

500g Bags GST30MB GST40MB

Qty

30 40

3.75 3.75

2.5kg 2.5kg

3.75

10kg

30 40

3.75 3.75

25kg 25kg

Length (mm)

Shank Dia. (mm)

Qty

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

2.00 2.65 3.35 4.00 4.00

25kg 25kg 25kg 25kg 25kg

10kg Tubs

2.5kg Bags GST30LB GST40LB

Shank Dia. (mm)

2.5kg Tubs

1kg Bags GST30B GST40B

Length (mm)

25kg Bulk Boxes GST30 GST40

GALV. PRESSER POINT STAPLES For fencing applications

Used for fixing fencing and wire mesh. Product Code

(mm)

Shank Dia. (mm)

Qty

20 25 30 40

2.00 2.65 3.35 4.00

75 60 30 20

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

500g 500g 500g 500g 500g

20 25 30 40 50

2.00 2.65 3.35 4.00 4.00

1kg 1kg 1kg 1kg 1kg

Length

Packs PPS20P PPS25P PPS30P PPS40P

2.5kg Bags

500g Bags PPS20MB PPS25MB PPS30MB PPS40MB PPS50MB

1kg Bags PPS20B PPS25B PPS30B PPS40B PPS50B

Product Code PPS20LB PPS25LB PPS30LB PPS40LB PPS50LB

2.5kg Tubs PPS20T PPS25T PPS30T PPS40T PPS50T

25kg Bulk Boxes PPS20 PPS25 PPS30 PPS40 PPS50

20 25 30 40 50

GALVANISED LOOSE NAILS

COLLATED & LOOSE NAILS

GALV. JAGGED PLASTERBOARD NAILS

GALV. SPRING HEAD NAILS

Product Code

For fixing plasterboard

Length (mm)

Shank Dia. (mm)

Qty

30 40

2.65 2.65

500g 500g

30 40

2.65 2.65

1kg 1kg

30 40

2.65 2.65

2.5kg 2.5kg

500g Bags JPN30MB JPN40MB

2.5kg Bags JPN30LB JPN40LB

2.5kg Tubs JPN30T JPN40T

Length (mm)

Shank Dia. (mm)

Qty

3.35

500g

3.35

1kg

3.35

2.5kg

3.35

2.5kg

500g Bags

1kg Bags JPN30B JPN40B

For fixing corrugated sheeting

GSN65MB

1kg Bags GSN65B

2.5kg Bags GSN65LB

2.5kg Tubs GSN65T

10kg Bulk Boxes 30 40

2.65 2.65

2.5kg 2.5kg

2.65 2.65

25kg 25kg

GSN65

3.35

10kg

Product Code

Length (mm)

Shank Dia. (mm)

Qty

100 125 150

5.40 6.40 6.40

2.5kg 2.5kg 2.5kg

50 65 75 100 125 150

5.40 5.40 5.40 5.40 6.40 6.40

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

5.40 5.40 5.40 5.40 6.40 6.40

25kg 25kg 25kg 25kg 25kg 25kg

25kg Bulk Boxes JPN30 JPN40

30 40

GALV. DRIVE SCREW NAILS For roofing applications

Fixing roofing and cladding sheets to timber purlins. Product Code

Length (mm)

Shank Dia. (mm)

Qty

50 65 75 100 125 150

5.40 5.40 5.40 5.40 6.40 6.40

500g 500g 500g 500g 500g 500g

50 65 75 100 125 150

5.40 5.40 5.40 5.40 6.40 6.40

1kg 1kg 1kg 1kg 1kg 1kg

50 65 75

5.40 5.40 5.40

2.5kg 2.5kg 2.5kg

500g Bags DSN50MB DSN65MB DSN75MB DSN100MB DSN125MB DSN150MB

2.5kg Bags

1kg Bags DSN50B DSN65B DSN75B DSN100B DSN125B DSN150B

2.5kg Bags DSN50LB DSN65LB DSN75LB

DSN100LB DSN125LB DSN150LB

2.5kg Tubs DSN50T DSN65T DSN75T DSN100T DSN125T DSN150T

25kg Bulk Boxes DSN50 DSN65 DSN75 DSN100 DSN125 DSN150

50 65 75 100 125 150

COLLATED & LOOSE NAILS

GALVANISED LOOSE NAILS

GALV. CLOUT NAILS For roofing applications Also available in:

COPPER

ALUMINIUM

Product Code

Length (mm)

Shank Dia. (mm)

Qty

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

30 40

2.65 2.65

10kg 10kg

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg 25kg

2.5kg Bags

Perfect for roofing applications. Product Code

Length (mm)

Shank Dia. (mm)

Qty

30 40 50 75

2.65 2.65 2.65 3.75

125 100 50 25

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

500g 500g 500g 500g 500g 500g 500g 500g 500g

25 30 40 40 50 50 65 65 75

2.65 2.65 2.65 3.35 2.65 3.35 2.65 3.75 3.75

1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg 1kg

Packs GCN30P GCN40P GCN50P GCN75P

500g Bags GCN25MB GCN30MB GCN40MB GCN33540MB GCN50MB GCN33550MB GCN26565MB GCN65MB GCN75MB

2.5kg Tubs GCN25T GCN30T GCN40T GCN33540T GCN50T GCN33550T GCN26565T GCN65T GCN75T

10kg Tubs GCN30LT GCN40LT

25kg Bulk Boxes

1kg Bags GCN25B GCN30B GCN40B GCN33540B GCN50B GCN33550B GCN26565B GCN65B GCN75B

GCN25LB GCN30LB GCN40LB GCN33540LB GCN50LB GCN33550LB GCN26565LB GCN65LB GCN75LB

GCN25 GCN30 GCN40 GCN33540 GCN50 GCN33550 GCN26565 GCN65 GCN75

25 30 40 40 50 50 65 65 75

SEE PAGE 68 CAVITY WALL FIXING

JUST DRILL, ZIP & FIX 98

GALVANISED LOOSE NAILS

COLLATED & LOOSE NAILS

GALV. ELH CLOUT NAILS Extra large head

Extra large diameter head for extra clamping, perfect for fitting roofing felt. Product Code

Length (mm)

Shank Dia. (mm)

Qty

Product Code

30 40 50

3.00 3.00 3.00

100 75 50

GEC30LB GEC40LB GEC50LB

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

500g 500g 500g 500g 500g 500g

GEC13T GEC20T GEC25T GEC30T GEC40T GEC50T

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

1kg 1kg 1kg 1kg 1kg 1kg

GEC13LT GEC20LT

13 20 25

3.00 3.00 3.00

2.5kg 2.5kg 2.5kg

Packs GEC30P GEC40P GEC50P

30 40 50

3.00 3.00 3.00

2.5kg 2.5kg 2.5kg

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

13 20

3.00 3.00

10kg 10kg

13 20 25 30 40 50

3.00 3.00 3.00 3.00 3.00 3.00

25kg 25kg 25kg 25kg 25kg 25kg

Length (mm)

Shank Dia. (mm)

Qty

100 125 150 180 200

82 71 60 38 36

1kg 1kg 1kg 1kg 1kg

100 125 150 180 200

82 71 60 38 36

10kg 10kg 10kg 10kg 10kg

10kg Tubs

2.5kg Bags GEC13LB GEC20LB GEC25LB

Qty

2.5kg Tubs

1kg Bags GEC13B GEC20B GEC25B GEC30B GEC40B GEC50B

Shank Dia. (mm)

2.5kg Bags

500g Bags GEC13MB GEC20MB GEC25MB GEC30MB GEC40MB GEC50MB

Length (mm)

25kg Boxes GEC13 GEC20 GEC25 GEC30 GEC40 GEC50

GALV. SLAB NAILS

For fixing insulation slabs to wood Product Code

1kg Bags

Used for securing slabs of insulation to wood. Product Code

Length (mm)

Shank Dia. (mm)

Qty

100 125 150 180 200

82 71 60 38 36

500g 500g 500g 500g 500g

500g Bags SLN100MB SLN125MB SLN150MB SLN180MB SLN200MB

SLN100B SLN125B SLN150B SLN180B SLN200B

10kg Boxes SLN100 SLN125 SLN150 SLN180 SLN200

COLLATED & LOOSE NAILS

SHERARDISED LOOSE NAILS

SHERARDISED LOOSE NAILS Sherardised nails give medium duty rust protection and conform to Eurocode 5 and Service class 2. Class 2 nails are for covered exterior applications where the timber is protected form direct wetting or where the timber moisture content does not exceed 20%. Available in a wide variety of packaging options and weights to suit any job size.

SHERARDISED ANNULAR RINGSHANK NAILS For additional strength Also available in:

BRIGHT

A2 STAINLESS STEEL

Product Code

Length (mm)

Shank Dia. (mm)

Qty

500g Bags

Qty

SAR40LB

2.65

2.5kg

SAR50LB

2.65

2.5kg

SAR65LB

3.35

2.5kg

SAR75LB

3.75

2.5kg

SAR100LB

100

5.0

2.5kg

2.5kg Tubs

SAR40MB

2.65

500g

SAR40T

2.65

2.5kg

SAR50MB

2.65

500g

SAR50T

2.65

2.5kg

SAR65MB

3.35

500g

SAR65T

3.35

2.5kg

SAR75MB

3.75

500g

SAR75T

3.75

2.5kg

SAR100MB

100

5.0

500g

SAR100T

100

5.0

2.5kg

1kg Bags

100

Shank Dia. (mm)

2.5kg Bags

Annular rings provide additional holding power, where increased grip is required. Product Code

Length (mm)

25kg Boxes

SAR40B

2.65

1kg

SAR40

2.65

25kg

SAR50B

2.65

1kg

SAR50

2.65

25kg

SAR65B

3.35

1kg

SAR65

3.35

25kg

SAR75B

3.75

1kg

SAR75

3.75

25kg

SAR100B

100

5.0

1kg

SAR100

100

5.0

25kg

SHERARDISED LOOSE NAILS

SHERARDISED PANEL PINS

SHERARDISED SQUARE TWIST NAILS

For light duty applications Also available in:

BRIGHT

For use with joist hangers

A2 STAINLESS STEEL

A light weight nail, commonly used for cabinet making and light duty applications.

Product Code

COLLATED & LOOSE NAILS

Also available in:

GALVANISED

For use with all types of builders metal work.

Length (mm)

Shank Dia. (mm)

Qty

Product Code

Length (mm)

Shank Dia. (mm)

Qty

SPP25MB

1.60

500g

SST30MB

SPP30MB

1.60

3.75

500g

SST40MB

3.75

SPP40MB

500g

1.60

500g

1kg Bags

SPP50MB

2.00

500g

SST30B

3.75

1kg

SST40B

3.75

1kg

500g Bags

1kg Bags SPP25B

1.60

1kg

2.5kg Bags

SPP30B

1.60

1kg

SPP40B

1.60

1kg

SST30LB

3.75

2.5kg

SPP50B

2.00

1kg

SST40LB

3.75

2.5kg

SPP25

1.60

25kg

SST30T

3.75

2.5kg

SPP30

1.60

25kg

SST40T

3.75

2.5kg

SPP40

1.60

25kg

SPP50

2.00

25kg

SST30

3.75

25kg

SST40

3.75

25kg

25kg Boxes

2.5kg Tubs

25kg Boxes

101

COLLATED & LOOSE NAILS

STAINLESS STEEL LOOSE NAILS

A2 STAINLESS LOOSE NAILS Stainless steel nails are for external applications and provide a very high level of rust protection. They conform to Eurocode 5 and are Service Class 3. Available in a wide variety of packaging options and weights to suit any job size.

STAINLESS STEEL ANNULAR RINGSHANK NAILS For additional strength Also available in:

BRIGHT

SHERARDISED

Annular rings provide additional holding power, where increased grip is required. Product Code

Length (mm)

Shank Dia. (mm)

Approx Per kg

Product Code

40 50 65 75 100

2.65 2.65 3.35 3.75 4.5

546 442 216 150 79

SSAR40 SSAR50 SSAR65 SSAR75 SSAR100

1kg Bags

Shank Dia. (mm)

Approx Per kg

40 50 65 75 100

2.65 2.65 3.35 3.75 4.5

546 442 216 150 79

10kg Boxes

SSAR40B SSAR50B SSAR65B SSAR75B SSAR100B

STAINLESS STEEL ROUNDWIRE NAILS

STAINLESS STEEL ROUND LOST HEAD NAILS

Also available in:

Full round head for clamping BRIGHT

GALVANISED

For light duty applications BRIGHT

General use with full round head for clamping.

The head can be punched below the surface for a concealed finish.

Product Code

Length (mm)

Shank Dia. (mm)

Approx Per kg

Product Code

75 100

3.75 4

150 100

SSLH50B SSLH65B

75 100

3.75 4

150 100

SSLH50 SSLH65B

1kg Bags SSRW75B SSWR100B

Length (mm)

Shank Dia. (mm)

Approx Per kg

50 65

2.65 3.35

443 216

50 65

2.65 3.35

443 216

1kg Bags

10kg Boxes SSRW75 SSRW100

102

Length (mm)

10kg Boxes

COPPER LOOSE NAILS / RIVETS / STRAPS

COLLATED & LOOSE NAILS

COPPER LOOSE NAILS Manufactured using high quality copper. These nails and straps are ideal for all types of roofing work including slate. Copper provides a high level of rust protection. Available in a wide variety of packaging options and weights to suit any job size.

COPPER CLOUT NAILS

COPPER DISC RIVETS

For roofing applications Also available in:

GALVANISED

For fibre cement tiles

ALUMINIUM

Large diameter head, perfect for attaching roofing felt, slate and shingles Product Code

Length (mm)

Shank Dia. (mm)

Qty

25 25 30 30 38 38 50

2.65 3.35 2.65 3.35 2.65 3.35 3.35

500g 500g 500g 500g 500g 500g 500g

25 25 30 30 38 38 50

2.65 3.35 2.65 3.35 2.65 3.35 3.35

1kg 1kg 1kg 1kg 1kg 1kg 1kg

25 25 30 30 38 38 50

2.65 3.35 2.65 3.35 2.65 3.35 3.35

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

25 25 30 30 38 38 50

2.65 3.35 2.65 3.35 2.65 3.35 3.35

2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg

Large diameter head, perfect for attaching fibre cement slates

500g Bags COP225MB COP325MB COP230MB COP330MB COP238MB COP338MB COP350MB

1kg Bags COP225B COP325B COP230B COP330B COP238B COP338B COP350B

2.5kg Bags COP225LB COP325LB COP230LB COP330LB COP238LB COP338LB COP350LB

2.5kg Tubs COP225T COP325T COP230T COP330T COP238T COP338T COP350T

Product Code

Length (mm)

Shank Dia. (mm)

Qty

1.50

250

1.50

1,000

Bags CDRB

Tubs CDRT

COPPER STRAPS

For fixing/repairing roofing slates

Used to prevent slate and shingles from slipping. Product Code

Length (mm)

Width (mm)

Qty

150 150

13 13

10 100

Bags CSS150P CSS150B

103

COLLATED & LOOSE NAILS

ALUMINIUM NAILS / MASONRY NAILS

ALUMINIUM LOOSE NAILS Manufactured using high quality aluminium. These nails are ideal for all types of roofing work including slate. Providing high levels of rust protection. Available in a wide variety of packaging options and weights to suit any job size.

ZINC MASONRY NAILS FLAT HEAD Product Code

Length (mm)

Shank Dia. (mm)

Qty

25 30 35 40 50 60 65

2.5 2.5 2.5 2.5 2.5 3.0 3.0

50 50 50 50 50 50 50

25 30 35 40 50 40 50 60 65

2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0

100 100 100 100 100 100 100 100 100

Length (mm)

Shank Dia. (mm)

Qty

3.5

65 75 85 100

3.5 3.5 3.5 3.5

100 100 100 100

Length (mm)

Shank Dia. (mm)

Qty

25 30 35 40 50 60 75

3.7 3.7 3.7 3.7 3.7 3.7 3.7

100 100 100 100 100 100 50

Packs

ALUMINIUM CLOUT NAILS For roofing applications Also available in:

GALVANISED

COPPER

HM25025P HM25030P HM25035P HM25040P HM25050P HM30060P HM30065P

Boxes Large diameter head, commonly used for tile hanging.

Product Code

ROUND HEAD

Length (mm)

Shank Dia. (mm)

Qty

30 40 50 65

2.65 3.35 3.35 3.35

250g 250g 250g 250g

250g Bags ACN30B ACN40B ACN50B ACN65B

1kg Bags ACN30LB ACN40LB ACN50LB ACN65LB ACN70LB ACN75LB

30 40 50 65 70 75

2.65 3.35 3.35 3.35 3.35 3.35

1kg 1kg 1kg 1kg 1kg 1kg

30 40 50 65

2.65 3.35 3.35 3.35

1kg 1kg 1kg 1kg

30 40 50 65

2.65 3.35 3.35 3.35

10kg 10kg 10kg 10kg

10kg Boxes ACN30 ACN40 ACN50 ACN65

104

Product Code

Packs HM35075P

Boxes

1kg Tubs ACN30T ACN40T ACN50T ACN65T

HM25025 HM25030 HM25035 HM25040 HM25050 HM30040 HM30050 HM30060 HM30065

HM35065 HM35075 HM35085 HM350100

WASHERED Product Code

Boxes WMN25 WMN30 WMN35 WMN40 WMN50 WMN60 WMN75

BUILDERS METAL WORK 106 - MASONRY HANGERS 107 - TIMBER HANGERS 109 - TRUSS CLIP 109 - TIMBER CONNECTOR 110 - RESTRAINT STRAPS 111 - ANGLE BRACKET 111 - NAIL PLATES 112 - UNIVERSAL FRAMING ANCHOR 112 - FIXING BAND 112 - CRAMPS 113 - TIES 114 - BRICK REINFORCEMENT 114 - WALL STARTER 115 - BRACKETS 115 - FENCING CLIP AND KIT 116 - JOIST STRUT AND HIP IRON 116 - PLATES AND BRACES 118 - SHIMS AND PACKERS

BUILDERS METAL WORK

MASONRY HANGERS

For masonry to timber applications Available in:

GALVANISED

STAINLESS STEEL

Supports timber joists from a brick or block wall. Install by either building into the wall or for renovation work rake out existing brickwork. Manufactured from pre-galvansied steel to give high level of corrosion resistance. For ultimate corrosion resistance use stainless steel.

SINGLE PIECE

WELDED

Hangers 140mm and above are manufactured 10mm less than the joist to allow for notching and regularised timber.

Hangers 140mm and above are manufactured 10mm less than the joist to allow for notching and regularised timber. H H

Product Code

W (mm)

47100MH 47125MH 47147MH 47175MH 47200MH 47225MH

47 47 47 47 47 47

H (mm)

B Joist Size (mm) W x H (mm)

Product Code

GALVANISED STEEL 100 125 150 17 5 200 225

80 80 80 75 75 75

47 x 100 47 x 125 47 x 150 47 x 175 47 x 200 47 x 225

W (mm)

H (mm)

B Joist Size (mm) W x H (mm)

GALVANISED STEEL 75150WMH 75175WMH 75200WMH 75225WMH 90150WMH 90175WMH 90200WMH 90225WMH 100150WMH 100175WMH 100200WMH 100225WMH 150200WMH 150225WMH

75 75 75 75 90 90 90 90 100 100 100 100 150 150

47100WMHS 47150WMHS 47175WMHS 47200WMHS 47225WMHS 100150WMHS 100175WMHS 100200WMHS 100225WMHS

47 47 47 47 47 100 100 100 100

140 165 190 215 140 165 190 215 140 165 190 215 190 215

80 80 80 80 80 80 80 80 75 75 75 75 90 90

75 x 150 75 x 175 75 x 200 75 x 225 90 x 150 90 x 175 90 x 200 90 x 225 100 x 150 100 x 175 100 x 200 100 x 225 150 x 200 150 x 225

STAINLESS STEEL

106

100 140 165 190 215 140 165 190 215

80 80 80 80 80 80 80 80 80

47 x 100 47 x 140 47 x 165 47 x 190 47 x 215 100 x 140 100 x 165 100 x 190 100 x 215

MASONRY HANGERS

MULTI-FUNCTIONAL HANGERS

For timber to timber applications Designed for use with different fixings to give greater flexibility and improved performance. Location tabs aid fast accurate alignment of the hanger. M12 bolt holes.

STANDARD

BUILDERS METAL WORK

MINI TIMBER HANGER

For timber to timber applications Available in:

GALVANISED

STAINLESS STEEL

Timber to timber joist hangers, suitable for light duty applications such as ceiling joists, decking and trimmers. Tag on base of the hanger helps avoid rotation and aids fast, accurate location. The tag can easily be bent if not required.

H B W

B W Product Code

W (mm)

H (mm)

B (mm)

Overall Length (mm)

Product Code

W (mm)

44THM 47THM

44 47

44THMS 47THMS

44 47

GALVANISED STEEL 47346MFH 47404MFH 47504MFH 76346MFH 76404MFH 76504MFH 90504MFH 100346MFH 100404MFH 100504MFH 150404MFH 150504MFH

47 47 47 76 76 76 90 100 100 100 150 150

150 179 229 165 164 214 207 123 152 202 127 177

85 85 85 85 85 85 85 85 85 85 85 85

346 404 504 346 404 504 504 346 404 504 404 504

B (mm)

Overall Length (mm)

H (mm)

B (mm)

Joist Size W x H (mm)

GALVANISED STEEL 68 67

50 50

44 x 75-100 47 x 75-100

STAINLESS STEEL 97 96

50 50

44 x 100 to 150 47 x 100 to 150

MINI Location tabs aid fast accurate alignment of the hanger. M12 bolt holes.

Product Code

W (mm)

H (mm)

GALVANISED STEEL 47240MMFH

240

107

BUILDERS METAL WORK

TIMBER HANGERS

STANDARD TIMBER HANGER

LONG LEG TIMBER HANGER

For timber to timber applications Available in:

GALVANISED

For timber to timber applications

STAINLESS STEEL

Available in:

Timber to timber joist hangers to support floor joist and trimmers of varying depths. Increased leg lengths, all widths can take up to a 225mm deep joist.

GALVANISED

Increased leg lengths, all widths can take up to a 225mm deep joist. Perfect for loft conversions where the hanger extends below the support.

Product Code

W (mm)

L (mm)

B (mm)

Joist Size (mm)

Product Code

W (mm)

GALVANISED STEEL 125TH 150TH

125 150

47THS 76THS 100THS

47 76 100

300 300

50 50

125 x 100 to 225 150 x 100 to 225

STAINLESS STEEL 275 300 300

50 50 50

47 x 100 to 225 76 x 100 to 225 100 x 100 to 225

L (mm)

B (mm)

Joist Size (mm)

GALVANISED STEEL 44450LTH 47450LTH 76450LTH 90450LTH 100450LTH 125450LTH 150450LTH

44 47 76 90 100 125 150

453 445 435 425 420 450 450

50 50 50 50 50 50 50

44 x 150 to 250 47 x 150 to 250 76 x 175 to 250 90 x 150 to 250 100 x 150 to 250 125 x 175 to 250 150 x 175 to 250

SQUARE TWIST NAILS For use with all types of builders metal work. Available in:

GALVANISED SHERARDISED

108

SEE PAGE

96/101

TIMBER HANGER / CONNECTORS / TRUSS CLIP

NO TAG TIMBER HANGER

BUILDERS METAL WORK

TRUSS CLIP

For fixing joists, grinders & rafters

For timber to timber applications Available in:

GALVANISED

Available in:

Superior design allows the use of fewer nails for faster installation. Increased leg lengths, all widths can take up to 225mm deep joist.

Product Code

W (mm)

For fixing trusses, girders and rafters to wall plate. Can also be used for general applications as a multi-purpose connector to provide restraint whenever two timber members cross.

L (mm)

B (mm)

Joist Size (mm)

Product Code

GALVANISED STEEL 44TH 47TH 63TH 75TH 90TH 100TH

44 47 63 75 90 100

GALVANISED

306 305 297 291 283 278

60 60 60 60 60 60

44 x 125 to 220 47 x 125 to 220 63 x 125 to 220 75 x 125 to 220 90 x 125 to 220 100 x 125 to 220

Width (mm)

Thickness (mm)

Height (mm)

GALVANISED STEEL 47TC

1.0

150

TIMBER CONNECTORS

For timber to timber applications Available in:

GALVANISED STEEL

GALVANISED

Designed to increase the joint strength when bolting two pieces of timber together.

Product Code

Size (mm)

Bore (mm)

Qty

M12

100

M12

Boxes TCD50

Bags TCD50B

Packs TCD50P

109

BUILDERS METAL WORK

RESTRAINT STRAPS

HEAVY AND LIGHT DUTY RESTRAINT STRAPS Joins joists and rafters to masonry

Available in:

GALVANISED

STAINLESS STEEL

HEAVY RESTRAINT STRAPS

LIGHT RESTRAINT STRAPS

Generally used for horizontal restraint such as roof trusses, rafters and joists tied to masonry. Use minimum of 7, 3.75 x 30mm nails or equivalent fixed to timber joists/ rafters.

Light duty straps are generally for vertical applications such as holding down wallplates. Use minimum of 10, 3.75 x 30mm nails or equivalent fixed to timber joists/ rafters.

4mm thick steel

Bend (mm)

Overall Thickness Length (mm) (mm)

Product Code

Type

600BRSH

Bent

100

600

800BRSH

Bent

100

1000BRSH

Bent

1200BRSH 1500BRSH 1600BRSH

2.4mm thick steel

Type

4.0

300BRSL

Bent

100

300

800

4.0

600BRSL

Bent

100

600

2.4

100

1,000

4.0

800BRSL

Bent

100

800

2.4

Bent

100

1,200

4.0

1000BRSL

Bent

100

1000

2.4

Bent

100

1,500

4.0

1200BRSL

Bent

100

1,200

2.4

Bent

100

1,600

4.0

1000FRSL

Flat

1,000

2.4

1000TRSL

Twisted

100

1,000

2.4

GALVANISED STEEL

1000FRSH

Flat

1,000

4.0

600TRSH

Twisted

100

600

4.0

1000TRSH

Twisted

100

1,000

4.0

STAINLESS STEEL

110

Bend (mm)

Overall Thickness Length (mm) (mm)

Product Code

1000BRSHS

Bent

100

1,000

4.0

1200BRSHS

Bent

100

1,200

4.0

2.4

STAINLESS STEEL 1000BRSLS

Bent

100

1,000

2.4

1000FRSLS

Flat

1,000

2.4

STRAPS / BRACKETS / NAIL PLATES

ENGINEERED HEAVY DUTY RESTRAINT STRAP

BUILDERS METAL WORK

ANGLE BRACKET

Fixes joists & rafters together

Joins joists and rafters to masonry Available in:

GALVANISED

Available in:

Lightweight design makes it easy to handle, yet retains its structural strength so it can be used instead of traditional heavy duty straps in both horizontal and vertical applications.

Product Code

Overall Length (mm)

Length Bend (mm) (mm)

Thickness (mm)

GALVANISED

STAINLESS STEEL

A versatile and general purpose 90â ° bracket used to strengthen timber joints. Available in galvanised steel, for ultimate corrosion resistance use stainless steel.

Product Code

GALVANISED STEEL

Width (mm)

Leg (mm)

Thickness (mm)

GALVANISED STEEL

600ERSH

500

100

600

1.4

800ERSH

700

100

800

1.4

1000ERSH

900

100

1000

1.4

1200ERSH

1100

100

1200

1.4

1600ERSH

1500

100

1600

1.4

5050AB 6040AB 9090AB 15090AB 150150AB

62 62 62 62 62

50 x 50 60 x 40 90 x 90 150 x 90 150 x 150

2.4 2.4 2.4 2.4 2.4

6040ABS 9090ABS

62 62

60 x 40 90 x 90

2.4 2.4

Product Code

Width (mm)

Thickness (mm)

Length (mm)

STAINLESS STEEL

NAIL PLATES

For timber to timber applications Available in:

GALVANISED

STAINLESS STEEL

A versatile perforated plate used for connecting or repairing timber. Strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish.

GALVANISED STEEL 42NP 85NP 104NP 169NP 178NP

42 85 104 169 178

85NPS

1.0 1.0 1.0 1.0 1.0

178 178 154 178 338

STAINLESS STEEL 1.0

178

111

BUILDERS METAL WORK

UFA / FIXING BAND / CRAMPS

UNIVERSAL FRAMING ANCHOR

For timber to timber applications Available in:

FIXING BAND

Perfect for suspending pipework Available in:

GALVANISED

STAINLESS STEEL

GALVANISED

An economical method of providing a strong joint for the construction of timber frames. The unique bending slot allows instant and accurate on-site bending for all 2 and 3 way ties. The reversible design is ideal for a variety of connections.

A versatile perforated metal strip which can easily be cut or bent to provide a quick and reliable light weight brace suitable for suspending pipework, cables and doing general repairs. Multiple hole sizes to add to its versatility. Four different hole sizes (3.75 round, M10 round, M6 and M8 Square) Product Code

Width (mm)

Length (m)

GALVANISED STEEL Product Code

Width (mm)

Height (mm)

1210FB 1810FB 2510FB

124

2010FBS

12 18 25

GALVANISED STEEL UFA

40 x 40

STAINLESS STEEL 20

SAFETY FRAME CRAMP

FISHTAIL CRAMP

Two 6mm holes and one 8mm hole. In stainless steel for maximum corrosion resistance.

Two 6mm holes and one 8mm hole. Galvanised after manufacture.

Product Code

(mm)

100FFC 150FFC 200FFC

25 25 25

For fixing frames to masonry

W Projection Bend Thickness (mm) length (mm) (mm) (mm)

For fixing frames to masonry

STAINLESS STEEL 100SFCS 150SFCS 200SFCS

112

10 10 10

19 19 19

100 150 200

50 50 50

Projection length (mm)

Bend Thickness (mm)

(mm)

GALVANISED STEEL 2.0 2.0 2.0

100 150 200

50 50 50

2.3 2.3 2.3

TIES / CLIPS

WINDOW BOARD TIE Masonry to window board Available in:

GALVANISED

Width (mm)

SCREW-IN FRAME TIE Masonry to wooden frames Available in:

A bracket designed as a simple solution for fixing down the window board.

Product Code

BUILDERS METAL WORK

Height (mm)

YELLOW

Screw Ties are used to tie timber door and window frames to adjacent brickwork.

Length (mm)

Thickness (mm)

Product Code

Thread Dia x L (mm)

175SFT

6 x 30

GALVANISED STEEL WBT

147

Projection Length (mm)

YELLOW 2.3

175

LIGHT DUTY WALL TIE

GENERAL DUTY WALL TIE

Also known as type 4. For domestic dwellings of up to two storeys or a maximum 10m in height.

Also known as type 2. For domestic houses and small commercial buildings of up to three storeys and maximum 15m in height.

Product Length x Code Gauge (mm)

Cavity Width (mm)

Max Height (m)

Qty

STAINLESS STEEL 200WT4 225WT4 250WT4 275WT4

200 x 2.3 225 x 2.3 250 x 2.3 275 x 2.3

50 to 75 76 to 100 101 to 125 up to 150

10 10 10 10

Cavity Width (mm)

Product Length x Code Gauge (mm)

Max Height (m)

Qty

STAINLESS STEEL 250 250 250 250

225WT2 250WT2 275WT2

225 x 3 250 x 3 275 x 3

76 to 100 101 to 125 up to 150

15 15 15

250 250 250

INSULATION RETAINING CLIP Use with wall ties

Used with a cavity wall tie to hold insulation material against the inner wall of the cavity. Frequently used in masonry joints for crack stitching and reinforcing.

Product Code

Width (mm)

Diameter (mm)

Qty

Universal

250

Bags IC

113

BUILDERS METAL WORK

HELICAL BAR / WALL STARTER / BRICK COIL

HELICAL BAR

WALL STARTER KIT

Masonry joints for reinforcing

Joins new walls to existing masonry

Available in: STAINLESS STEEL

Helical bar is used in a variety of applications, in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures.

A stainless steel system, designed to join new walls to existing masonry, suitable for both internal and external brick or block walls. Kit includes: x2 wall rails x5 plugs / coach screws / washers x10 wall rail connectors

Product Code

Size (mm)

Dia. (mm)

Length (mm)

Qty

Product Code

STAINLESS STEEL M6HB M8HB

M6 x 1000 M8 x 1000

6 8

1000 1000

Width (mm)

Length (mm)

Kit Length (2 x Profiles) (mm)

430 FERRITIC STAINLESS STEEL 25 25

WSS

1200

2400

BRICK REINFORCEMENT COIL Perfect for preventing cracking Available in:

GALVANISED

STAINLESS STEEL

Produced for brick and block work reinforcement. Its primary usage is to prevent cracking. Product Code

Width (mm)

Length (m)

GALVANISED STEEL 63BRCG 100BRCG 175BRCG

65 100 175

20 20 20

STAINLESS STEEL 63BRCSS 100BRCSS

114

65 100

20 20

BRACKETS / FENCING CLIP / KIT

DRYWALL BRACKET

Fixing dry lining systems to masonry Available in:

ZINC

BUILDERS METAL WORK

ARRIS RAIL BRACKET

For fixing fences to timber posts Available in:

GALVANISED

Ideal for installing and repairing fences with timber posts.

Designed for connecting dry lining systems to masonry walls and timber joists. Product Code

Size (mm) WxLxA

Qty

Product Code

Width (mm)

300ARS

62 x 62

ZINC DB195 DB295

195 295

Thickness (mm)

GALVANISED STEEL 100 100

FENCING CLIP

For fixing fence posts to masonry Available in:

Length (mm)

GALVANISED

300

0.7

FENCE KIT

Fence repair and general maintenance Available in:

GALVANISED

A quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry.

Collection of fixtures suitable for fence repair and general maintenance.

Product Code

Bolt & Nut (mm)

FKITP

M10 x 120

Width (mm)

Contents: 2 x Square Plate Washers 2 x Carriage Bolt & Hex Nut 2 x Corner Brace (38mm)

GALVANISED STEEL FC44 FC51

44 51

Washer (mm)

Braces (mm)

GALVANISED STEEL M10 x 50

115

BUILDERS METAL WORK

JOIST STRUT / TOP CONNECTOR / HIP IRON

HERRINGBONE JOIST STRUT

Alternative to timber noggins Available in:

GALVANISED

Size (mm)

HJS400 HJS500 HJS600

400 joist centres 500 joist centres 600 joist centres

Joins worktops together Available in:

Herringbone Joist Struts provide the means to prevent sideways movement or the buckling of joists, a simple alternative to labour intensive traditional timber noggins.

Product Code

WORK-TOP CONNECTOR

Strut Length (mm)

ZINC

Provides a concealed and strong joint for worktops eliminating the need for surface mounted joining strips. Frequently used in pairs. Brackets require 35mm holes.

Qty

Product Code

Size (mm) WxLxA

WC6150

M6 x 150

GALVANISED STEEL 480 523 680

Qty

ZINC 10 10 10

HIP IRON

Used to prevent ridge tile movement Available in:

HOT DIPPED GALV

Provides a decorative restraint when bedding hip tiles. Used to prevent ridge tile movement on hip roofs. Product Code

Width (mm)

Length (mm)

Thickness (mm)

HOT DIPPED GALVANISED STEEL HI3003

116

300 x 3

300

PLATES / BRACES

BUILDERS METAL WORK

PLATES AND BRACES

For strengthening and repairing Available in:

ZINC

Corner Plate

BRASS

Mending Plate

Tee Plate

Size (mm) WxLxA

Thickness (mm)

Qty

1.5 1.5

50 50

75MPL 100MPL

50 x 50 x 13 75 x 75 x16

1.5 1.5

4 4

75MPLP 100MPLP

Thickness (mm)

Qty

Product Code

76 x 76 x 16 x 16

2.0

38SPL

76 x 76 x 16 x 16

2.0

Size (mm)

Type

Qty

32 38 32 38

Plain Plain Slotted Slotted

1 1 1 1

Size (mm) LxWxH

Thickness (mm)

Qty

38 x 25 x 29

1.8

100

Packs 38SPLP

50 50

75 x 16 100 x 16

1.85 2.0

4 4

Size (mm) LxWxH

Thickness (mm)

Qty

38 x 25 x 29

1.8

100

38 x 25 x 29

1.8

Size (mm) HxLxW

Thickness (mm)

Qty

25CBR

25 x 25 x 16

1.6

38CBR

38 x 38 x 16

1.6

50CBR

50 x 50 x 16

1.6

65CBR

65 x 65 x 16

1.7

75CBR

75 x 75 x 16

1.7

100CBR

100 x 100 x 22

2.3

25CBRP

25 x 25 x 16

1.6

38CBRP

38 x 38 x 16

1.6

50CBRP

50 x 50 x 16

1.6

65CBRP

65 x 65 x 16

1.7

75CBRP

75 x 75 x 16

1.7

100CBRP

100 x 100 x 22

2.3

38SPLP

Product Code

Packs

Boxes 38SPL

1.85 2.0

Boxes

ANGLED BRACE Product Code

75 x 16 100 x 16

CORNER BRACE

Packs PMP32P PMP38P SMP32P SMP38P

Qty

Packs

MIRROR PLATE Product Code

Thickness (mm)

Boxes

Packs 76TPLP

Size L x W (mm)

STRETCHER PLATE

Size (mm) WxLxAxA

Boxes 76TPL

Corner Brace

Packs

TEE PLATE Product Code

Product Code

50 x 50 x 13 75 x 75 x16

Packs 50CPLP 75CPLP

Angled Brace

Boxes

Boxes 50CPL 75CPL

Mirror Plate

MENDING PLATE

CORNER PLATE Product Code

Stretcher Plate

38 x 25 x 29

1.8

117

BUILDERS METAL WORK

SHIMS / PACKERS / INTERLOCKING WEDGE

SHIMS, PACKERS & INTERLOCKING WEDGE For levelling and packing

SHIMS -

PACKERS -

Used for easy and quick levelling of battens, dry lining systems, stud work, door and window frames.

Used to ensure correct weight distribution of glazed units and increase security around fixing points during frame fitting.

• Polypropylene material • Resistant to weather changes • Waterproof • Bag and tub includes two sizes Size (mm)

Product Code

Thickness Colour (mm)

• Polypropylene material • Resistant to weather changes • Waterproof • Strong and durable Qty

Mixed Tub

SHIMTUB

45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50

1 2 3 4 5 6 1 2 3 4 5 6

Yellow Green Blue Red Brown Black Yellow Green Blue Red Brown Black

40 40 40 40 20 20 40 40 40 40 20 20

1 2 3 4 5 6 1 2 3 4 5 6

Yellow Green Blue Red Brown Black Yellow Green Blue Red Brown Black

20 20 20 20 10 10 20 20 20 20 10 10

SHIM

Thickness Colour (mm)

Qty

Mixed Tub 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28

1 2 3 4 5 6

Green Black White Grey Blue Red

60 80 100 40 40 80

100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28

1 2 3 4 5 6

Green Black White Grey Blue Red

30 40 50 20 20 40

P1GREEN P2BLACK P3WHITE P4GREY P5BLUE P6RED

100 x 28 100 x 28 100 x 28 100 x 28 100 x 28 100 x 28

1 2 3 4 5 6

Green Black White Grey Blue Red

200 200 200 200 200 200

Product Code

Size (mm)

PACKERTUB

Mixed Bag PACKER

Mixed Bag 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 45 x 35 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50 100 x 50

Size (mm)

Product Code

Bags

INTERLOCKING WEDGES The wedges provide a support block of consistent dimensions and allow adjustment for levelling and aligning various building components.

118

Thickness Colour Qty (mm)

Bags PIW810 PIW915

80 x 30 x 10 90 x 45 x 15

1 2

Black 200 Black 200

DRILLING 120 - SDS PLUS HAMMER BITS 121 - SDS PLUS STEELS 122 - SDS MAX HAMMER BITS 122 - SDS MAX STEELS 123 - SDS REBAR CUTTERS 124 - DRILL BITS 125 - TILE AND GLASS BITS 125 - DIAMOND DRILL BITS 126 - BRAD POINT BITS 126 - HEX FLAT WOOD BITS 126 - AUGER BITS 126 - HINGE CUTTERS 129 - JOBBER DRILLS 133 - BLACKSMITH DRILLS 133 - STUB DRILLS 134 - DRILL SETS 135 - BROACHING CUTTERS 136 - COUNTERSINKS 137 - WIRE BRUSHES 140 - CHUCKS AND ADAPTERS

DRILLING

SDS PLUS HAMMER BIT

PROFESSIONAL SDS PLUS HAMMER BIT

Materials

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles AP4110 AP4160 AP5110 AP5160 AP5210 AP55110 AP55160 AP55210 AP6110 AP6160 AP6210 AP6260 AP6350 AP65110 AP65160 AP65210 AP65260 AP7110 AP7160 AP7210 AP7260 AP8110 AP8160 AP8210 AP8260 AP8310 AP8350 AP8450 AP9210 AP10160 AP10210 AP10260 AP10310 AP10450 AP10600 AP101000 AP12160 AP12210 AP12260

120

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles 4.0 4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0

50 100 50 100 150 50 100 150 50 100 150 200 290 50 100 150 200 50 100 150 200 50 100 150 200 250 300 400 150 100 150 200 250 400 550 950 100 150 200

110 160 110 160 210 110 160 210 110 160 210 260 350 110 160 210 260 110 160 210 260 110 160 210 260 310 350 450 210 160 210 260 310 450 600 1000 160 210 260

AP12310 AP12450 AP12600 AP121000 AP13260 AP14160 AP14210 AP14260 AP14310 AP14450 AP141000 AP15260 AP16160 AP16210 AP16260 AP16310 AP16450 AP16600 AP161000 AP18210 AP18260 AP18310 AP18450 AP20210 AP20310 AP20450 AP20600 AP201000 AP22260 AP22450 AP22600 AP24260 AP24450 AP25260 AP25450 AP25600 AP251000 AP28450 AP30450

12.0 12.0 12.0 12.0 13.0 14.0 14.0 14.0 14.0 14.0 14.0 15..0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 20.0 22.0 22.0 22.0 24.0 24.0 25.0 25.0 25.0 25.0 28.0 30.0

250 400 550 950 200 100 150 200 250 400 950 182 100 150 182 232 400 550 950 150 200 228 400 132 228 400 550 950 180 400 550 180 400 180 400 550 950 400 400

310 450 600 1000 260 160 210 260 310 450 1000 260 160 210 260 310 450 600 1000 210 260 310 450 210 310 450 600 1000 260 450 600 260 450 260 450 600 1000 450 450

SDS PLUS HAMMER BIT

DRILLING

TRADESMAN SDS PLUS HAMMER BIT

Materials

A cost effective drill bit with a tungsten carbide tip to give durability and precision when used in concrete and masonry.

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles SDS4160 SDS5110 SDS5160 SDS5210 SDS55110 SDS55160 SDS55210 SDS6110 SDS6160 SDS6210 SDS6260 SDS65110 SDS65160 SDS65210 SDS65260 SDS7110 SDS7160 SDS7210 SDS8110 SDS8160 SDS8210 SDS8260 SDS8310 SDS8450 SDS10160 SDS10210 SDS10260 SDS10310 SDS10450 SDS10600 SDS12160 SDS12210 SDS12260 SDS12310 SDS12450 SDS12600 SDS14160 SDS14210 SDS14260 SDS14310 SDS14450 SDS14600 SDS16160 SDS16210 SDS16260 SDS16310 SDS16450 SDS16600

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles 4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 16.0 16.0

100 50 100 150 50 100 150 50 100 150 200 50 100 150 200 50 100 150 50 100 150 200 250 400 100 150 200 250 400 550 100 150 200 250 400 550 100 150 200 250 400 550 100 150 200 250 400 550

160 110 160 210 110 160 210 110 160 210 260 110 160 210 260 110 160 210 110 160 210 260 310 450 160 210 260 310 450 600 160 210 260 310 450 600 160 210 260 310 450 600 160 210 250 300 450 600

SDS18210 SDS18260 SDS18310 SDS18450 SDS20210 SDS20310 SDS20450 SDS20600 SDS22260 SDS22450 SDS25450

18.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 22.0 22.0 25.0

150 200 250 400 150 250 400 550 200 400 400

200 260 300 450 200 300 450 600 250 450 450

SDS PLUS STEELS

POINT

TILE

SPADE/CHISEL

GOUGE

NOT TO BE USED IN ROTARY MODE. POINT - Breaks up concrete and masonry. TILE - Angled head design for easy removal of tiles, plaster or rendering. CHISEL \ SPADE - Breaks up concrete and masonry. Also removes plaster or rendering. GOUGE - Removes mortar from brickwork prior to re-pointing. Product Code

Description

Width (mm)

Total Length (mm)

Point Chisel Spade Gouge Tile

N/A 20 40 22 40

250 250 250 250 250

Singles SDSP SDSC SDSS SDSG SDST

121

DRILLING

SDS MAX HAMMER BITS

SDS MAX HAMMER BIT

Materials

SDS Max is an alternative system to the SDS Plus. Used mainly to drill dense materials or where there is heavy usage.

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles SDSM12340 SDSM12540 SDSM14340 SDSM14540 SDSM16340 SDSM16540 SDSM18340 SDSM18540 SDSM18690 SDSM18920 SDSM20340

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles 12 12 14 14 16 16 18 18 18 18 20

195 395 195 395 195 395 195 395 545 775 195

340 540 340 540 340 540 340 540 690 920 340

SDSM20540 SDSM20690 SDSM20920 SDSM24340 SDSM25340 SDSM25540 SDSM25690 SDSM26340 SDSM26540 SDSM32340 SDSM32540

SDS MAX STEELS

20 20 20 24 25 25 25 26 26 32 32

395 545 775 195 195 395 545 195 395 195 395

540 690 920 340 340 540 690 340 540 340 540

Materials

A range of tools designed for use in rotation stop hammers with the larger SDS Max tool holder system. NOT TO BE USED IN ROTARY MODE. POINT - Breaks up concrete and masonry. CHISEL - Breaks up concrete and masonry, removes plaster or rendering. SLOTTING TOOL - Removes mortar from brickwork prior to re-pointing. POINT Product Code

Description

Total Width Length (mm) (mm)

Singles SDSMP280 Point SDSMP400 Point SDSMC280 Chisel SDSMC400 Chisel SDSMC40050 Wide Chisel SDSMC30075 Extra Wide Chisel SDSMST Slotting Tool

122

N/A N/A 25 25 50 75 25

280 400 280 400 400 300 280

CHISEL

SLOTTING

REBAR CUTTER

DRILLING

SDS SHANK REBAR CUTTER

Materials

Used to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.

Rotary rebar cutters are designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the recommended R.P.M’s.

SHANK REBAR CUTTER

HEAD ONLY

Used to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.

Used with rebar adaptor to drill through in-situ rebar when drilling into concrete. USE ROTARY MODE ONLY.

How to Guide

Product Code

Drill Ø (mm)

Working Length (mm)

Total Length (mm)

Rec. RPM

10.0 12.0 14.0 16.0 18.0 20.0

250 250 250 250 250 250

300 300 300 300 300 300

750-1000 600-850 600-850 500-750 500-750 460-600

Singles MSRB10* MSRB12* MSRB14* MSRB16 MSRB18 MSRB20

Product Code

Drill Ø (mm)

Working Length (mm)

Total Length (mm)

Rec. RPM

22.0 24.0 25.0

110 110 110

260 260 260

460-600 350-500 350-500

Singles MRB22HO MRB24HO MRB25HO

* Products are not vented.

ADAPTOR FOR CUTTER HEADS Used with 22mm and above rebar cutter heads. USE ROTARY MODE ONLY.

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles STDS212

220

260

123

DRILLING

MASONRY DRILL BITS

TCT MULTI-PURPOSE DRILL BIT

Materials

Designed to drill steel, wood, masonry, PVCu, ceramics and concrete. Diamond-ground cutting edges allow fast drilling even in hard materials.

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles MP475 MP4150 MP585 MP5150 MP55100 MP55150 MP6100

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles 4.0 4.0 5.0 5.0 5.5 5.5 6.0

40 87 55 87 58 87 58

75 150 85 150 100 150 100

MP6150 MP65100 MP65150 MP7100 MP7150 MP8150 MP10150

6.0 6.5 6.5 7.0 7.0 8.0 10.0

MASONRY DRILL BIT

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles APM475 APM4150 APM585 APM5150 APM5585 APM55150 APM6100 APM6150 APM6200 APM6300 APM65100 APM65150 APM65200 APM65300 APM7100 APM7150 APM7300 APM8120 APM8150 APM8200

124

150 100 150 100 150 150 150

Materials

A premium quality masonry bit for use in cordless and corded drill drivers in both rotary and hammer action. Product Code

87 58 87 58 87 87 87

Product Code

MIXED SET AVAILABLE PAGE 135

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles 4.0 4.0 5.0 5.0 5.5 5.5 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0

40 87 47 87 47 87 58 87 120 220 58 87 120 220 58 87 220 75 87 120

75 150 85 150 85 150 100 150 200 300 100 150 200 300 100 150 300 120 150 200

APM8300 APM10120 APM10150 APM10200 APM10300 APM10400 APM12150 APM12200 APM12300 APM12400 APM14150 APM14200 APM14400 APM16150 APM16200 APM16300 APM16400 APM20200 APM20400 APM25400

8.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 20.0 20.0 25.0

220 75 87 120 220 300 90 127 220 300 90 127 300 90 127 220 300 152 300 300

300 120 150 200 300 400 150 200 300 400 150 200 400 150 200 300 400 200 400 400

GLASS AND TILE DRILL BITS

DRILLING

TCT TILE AND GLASS BIT

Materials

For accurate drilling of glass and ceramics. A lubricant such as water or turpentine is recommended when drilling glass. USE AT LOW R.P.M IN ROTARY MODE ONLY. Product Code

Drill Ø (mm)

Working Length (mm)

5.0 6.0 6.5 7.0 8.0 10.0

60 60 75 75 75 80

Singles TG5 TG6 TG65 TG7 TG8 TG10

DRY DIAMOND DRILL BIT

WET DIAMOND DRILL BIT

Ideal for drilling a clean hole into hard materials such as ceramics, porcelain, marble and slate.

Used to drill an accurate hole into hard materials such as ceramics, porcelain, marble and slate.

ROTARY MODE ONLY

USE WET ROTARY MODE ONLY

Materials

How to Guide

Product Code

Drill Ø (mm)

Working Length (mm)

Product Code

5 6 7 8 10 12 15 20 25

65 65 80 80 80 80 80 80 80

DD5 DD6 DD7 DD8 DD10 DD12 DD20 DD115

Singles VBD5 VBD6 VBD7 VBD8 VBD10 VBD12 VBD15 VBD20 VBD25

Drill Ø (mm)

Working Length (mm)

5 6 7 8 10 12 20 115

35 35 35 35 35 35 35 35

Singles

125

DRILLING

WOOD DRILL BITS

HSS BRAD POINT WOOD BIT

HEXAGONAL SHANK FLAT WOOD BIT

For drilling small diameter holes into various types of timber and man-made boards.

The twin cutting edges and integral centre point enhances speed & provides rapid chip removal when drilling various types of timber and man made boards. 0+8 single cut tip.

Materials

MIXED SET AVAILABLE PAGE 134 Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles BP3 BP4 BP5 BP6 BP7 BP8 BP10

MIXED SET AVAILABLE PAGE 134 Product Code

Drill Ø (mm)

Total Length (mm)

6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0 25.0 26.0 28.0 30.0 32.0 35.0 38.0

152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

Singles 3.0 4.0 5.0 6.0 7.0 8.0 10.0

33 43 52 57 69 75 87

60 75 87 92 108 118 133

TCT HINGE CUTTER Superb quality, heavy duty tungsten carbidetipped hinge drill with centre point and outer spurs. Designed to drill 35mm holes for concealed hinges.

FB6 FB8 FB10 FB12 FB13 FB14 FB16 FB18 FB19 FB20 FB22 FB24 FB25 FB26 FB28 FB30 FB32 FB35 FB38

1/4” EXTENSION ROD

Materials

1/4” extension rods to be used where there is restrictive access and in conjunction with a ¼” shank Flat Wood Bit, (Allen key provided). Product Code

Drill Ø Overall (mm) Length (mm)

Shank Ø (mm)

Singles 35HC

126

12.7

Product Code FBEQR150 FBEQR300

Drill Ø (mm)

Length

6.35 Q/R 6.35 Q/R

150 300

WOOD DRILL BITS

DRILLING

HEX AND SDS PLUS WOOD AUGER BIT

Materials

A high performance wood drill for drilling deep holes into various types of timber.

HEX SHANK

Product Code

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles HA10100 HA12100 HA16100 HA20100 HA22100 HA25100 HA32100 HA8155 HA14155 HA16155 HA19155 HA20155 HA22155 HA25155 HA28155 HA30155 HA32155 HA6235 HA8235 HA10235 HA12235 HA13235 HA14235 HA16235 HA18235 HA19235 HA20235 HA22235 HA24235

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles 10.0 12.0 16.0 20.0 22.0 25.0 32.0 8.0 14.0 16.0 19.0 20.0 22.0 25.0 28.0 30.0 32.0 6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0

55 55 55 55 55 55 55 90 90 90 90 90 90 90 90 90 90 165 165 165 165 165 165 165 165 165 165 165 165

100 100 100 100 100 100 100 155 155 155 155 155 155 155 155 155 155 235 235 235 235 235 235 235 235 235 235 235 235

HA25235 HA26235 HA28235 HA30235 HA32235 HA8460 HA10460 HA12460 HA14460 HA16460 HA18460 HA20460 HA22460 HA26460

Product Code

235 235 235 235 235 460 460 460 460 460 460 460 460 460

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles SA6200 SA8200 SA10235 SA12235 SA16235 SA20235 SA22235 SA25235

6.0 8.0 10.0 12.0 16.0 20.0 22.0 25.0

100 100 160 160 160 160 160 160

200 200 235 235 235 235 235 235

Materials

Product Code

MIXED SET AVAILABLE PAGE 134

165 165 165 165 165 385 385 385 385 385 385 385 385 385

SDS PLUS SHANK

SPEED WOOD AUGER BIT

Speed Augers with a four fluted cutter, designed for rapid chip ejection and cleaner hole drilling in timber.

25.0 26.0 28.0 30.0 32.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 26.0

Drill Ø Working Total (mm) Length (mm) Length (mm)

Singles SPA16 SPA20 SPA25

16.0 20.0 25.0

80 80 80

159 159 159

127

DRILLING

WOOD DRILL BITS

HIGH PERFORMANCE DEEP CUT AUGER BIT

HIGH PERFORMANCE IMPACT AUGER BIT

A high performance Auger bit specifically designed to drill a deep clean hole into all natural woods. This high quality drill will out perform a standard Auger drill in lifetime and performance.

KEY FEATURES

DESIGNED FOR IMPACT DRIVERS.

• 3x longer life

KEY FEATURES

• Spurred cutting edge for a fast even cut

• 3x longer life • Spurred cutting edge for a fast even cut

• Unique twist design for clean, smooth chip removal

• Burr-free lead screw for quick, on-target starts without material build up

• High carbon steel (S55C) with precise all hardened treatment.

• Made in Japan

• Made in Japan Materials

Materials

Product Drill Ø Code (mm)

Working Length (mm)

Total Length (mm)

Shank (mm)

260 300 300 351 351 351 351 351 351 351 351 351

300 400 400 457 457 457 457 457 457 457 457 457

4.7 Round 4.7 Round 8.0 Hex 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC 11.0 QC

Singles DA5 DA6 DA8 DA10 DA12 DA14 DA16 DA18 DA20 DA22 DA25 DA32

128

Product Drill Ø Code (mm)

Working Length (mm)

Total Length (mm)

Shank (mm)

90 100 100 110 120 130 130 130 135 135 135 135

140 160 170 180 190 200 200 200 205 205 205 205

6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 10.0 Hex

Singles 5 6 8 10 12 14 16 18 20 22 25 32

IA5 IA6 IA8 IA10 IA12 IA14 IA16 IA18 IA20 IA22 IA25 IA32

5 6 8 10 12 14 16 18 20 22 25 32

JOBBER DRILLS

DRILLING

COBALT JOBBER DRILL

Materials

Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135° split point prevents the bit from drifting.

Product Code

Drill Ø (mm)

Flute Length (mm)

Total Length (mm)

Pack Qty

1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

12 18 24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 94 101 101 101

34 40 49 57 61 65 65 70 75 75 80 86 86 93 93 101 109 109 109 117 117 125 125 133 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5

Tubes HSSCO1 HSSCO15 HSSCO2 HSSCO25 HSSCO3 HSSCO32 HSSCO33 HSSCO35 HSSCO4 HSSCO42 HSSCO45 HSSCO48 HSSCO5 HSSCO55 HSSCO6 HSSCO65 HSSCO68 HSSCO7 HSSCO75 HSSCO8 HSSCO85 HSSCO9 HSSCO95 HSSCO100 HSSCO102 HSSCO105 HSSCO110 HSSCO115 HSSCO120 HSSCO125 HSSCO130

Product Code

Drill Ø (mm)

Flute Length (mm)

Total Length (mm)

Pack Qty

1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0

12 18 24 30 33 36 36 39 43 43 47 52 52 57 57 63 69 69 75 75 81 81 87 87 94 94 101 101 101

34 40 49 57 61 65 65 70 75 75 80 86 86 93 93 101 109 109 117 117 125 125 133 133 142 142 151 151 151

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Singles HSSCOR1 HSSCOR15 HSSCOR2 HSSCOR25 HSSCOR3 HSSCOR32 HSSCOR33 HSSCOR35 HSSCOR4 HSSCOR42 HSSCOR45 HSSCOR48 HSSCOR5 HSSCOR55 HSSCOR6 HSSCOR65 HSSCOR7 HSSCOR75 HSSCOR8 HSSCOR85 HSSCOR9 HSSCOR95 HSSCOR100 HSSCOR105 HSSCOR110 HSSCOR115 HSSCOR120 HSSCOR125 HSSCOR130

DRILL SET A comprehensive selection of HSS drills ranging between 1.0mm to 10.0mm in 0.5mm increments.

Product Code

Description

HSSCO19DS 19pcs. 1-10mm (increments of 0.5mm) HSSCO25DS 25pcs. 1-13mm (increments of 0.5mm)

129

DRILLING

JOBBER DRILL

M2 FULLY GROUND JOBBER DRILL

Materials

Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting.

Product Code

Drill Ø (mm)

Flute Length (mm)

1.0 1.5 2.0 2.4 2.5 3.0 3.1 3.2 3.3 3.5 3.6 3.8 4.0 4.1 4.2 4.5 4.8 4.9 5.0 5.1 5.3 5.5 6.0 6.4 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

12 18 24 30 30 33 36 36 36 39 39 43 43 43 43 47 52 52 52 52 52 57 57 63 63 69 69 69 75 75 81 81 87 87 87 94 94 101 101 101

34 40 49 57 57 61 65 65 65 70 70 75 75 75 75 80 86 86 86 86 86 93 93 101 101 109 109 109 117 117 125 125 133 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5

2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0

24 30 33 39 43 47 52 57 57 63 69

49 57 61 70 75 80 86 93 93 101 109

1 1 1 1 1 1 1 1 1 1 1

Total Pack Length (mm) Qty

Tubes HSSG1 HSSG15 HSSG2 HSSG24 HSSG25 HSSG3 HSSG31 HSSG32 HSSG33 HSSG35 HSSG36 HSSG38 HSSG4 HSSG41 HSSG42 HSSG45 HSSG48 HSSG49 HSSG5 HSSG51 HSSG53 HSSG55 HSSG6 HSSG64 HSSG65 HSSG68 HSSG7 HSSG75 HSSG8 HSSG85 HSSG9 HSSG95 HSSG100 HSSG102 HSSG105 HSSG110 HSSG115 HSSG120 HSSG125 HSSG130

130

Drill Ø (mm)

Flute Length (mm)

8.0 8.5 9.0 10.0 11.0 12.0 13.0

75 75 81 87 94 101 101

Total Pack Length (mm) Qty

Singles

Singles HSSGR2 HSSGR25 HSSGR3 HSSGR35 HSSGR4 HSSGR45 HSSGR5 HSSGR55 HSSGR6 HSSGR65 HSSGR7

Product Code

HSSGR8 HSSGR85 HSSGR9 HSSGR100 HSSGR110 HSSGR120 HSSGR130

117 117 125 133 142 151 151

1 1 1 1 1 1 1

IMPERIAL Product Code

Drill Ø (Imp.)

Flute Length (Imp.)

1/16 1/32 3/64 5/64 3/32 7/64 1/8 9/64 5/32 3/16 13/64 7/32 1/4 5/16 21/64 3/8 1/2

7/8 1/2 3/4 1 11/4 11/2 15/8 13/4 2 25/16 27/16 21/2 23/4 33/16 35/16 35/8 41/2

Total Pack Length (Imp.) Qty

Tubes HSIG116 HSIG132 HSIG364 HSIG564 HSIG332 HSIG764 HSIG18 HSIG964 HSIG532 HSIG316 HSIG1364 HSIG732 HSIG14 HSIG516 HSIG2164 HSIG38 HSIG12

17/8 13/8 11/4 2 21/4 25/8 23/4 27/8 21/8 31/2 35/8 33/4 4 41/2 45/8 5 6

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5

DRILL SET A comprehensive selection of HSS drills ranging between 1.0mm to 10.0mm in 0.5mm increments.

Product Code HSSG19DS HSSG25DS

Description 19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm)

JOBBER DRILL

DRILLING

M2 FULLY GROUND LONG JOBBER DRILL

Materials

For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above prevents ‘walking’ and enables faster penetration.

Product Code

Drill Ø (mm)

Flute Length (mm)

Total Pack Length (mm) Qty

Tubes HSSGL2 2.0 HSSGL25 2.5 HSSGL3 3.0 HSSGL32 3.2 HSSGL35 3.5 HSSGL4 4.0 HSSGL42 4.2 HSSGL45 4.5 HSSGL48 4.8 HSSGL5 5.0 HSSGL55 5.5 HSSGL6 6.0 HSSGL65 6.5 HSSGL7 7.0 HSSGL8 8.0 HSSGL85 8.5 HSSGL9 9.0 HSSGL100 10.0

Product Code

Drill Ø (mm)

Flute Length (mm)

3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0

66 73 78 82 87 91 91 97 102 109

Total Pack Length (mm) Qty

Singles 56 62 66 69 73 78 78 82 87 87 91 91 97 102 109 109 115 121

85 95 100 106 112 119 119 126 132 132 139 139 148 156 165 165 175 184

10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5

HSSGLR3 HSSGLR35 HSSGLR4 HSSGLR45 HSSGLR5 HSSGLR55 HSSGLR6 HSSGLR65 HSSGLR7 HSSGLR8

100 112 119 126 132 139 139 148 156 165

1 1 1 1 1 1 1 1 1 1

COLLATED NAILS AND FUEL CELLS DESIGNED FOR USE IN

SEE PAGE

CORDLESS GAS AND PNEUMATIC NAILERS

88 & 89

131

DRILLING

JOBBER DRILL

ROLL FORGED JOBBER DRILL

Materials

An economic HSS drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting. Product Code

Drill Ø (mm)

Flute Length (mm)

1.0 1.5 2.0 2.5 3.0 3.2 3.3 3.5 3.6 4.0 4.2 4.5 4.8 4.9 5.0 5.2 5.5 6.0 6.5 6.8 7.0 7.2 7.5 8.0 8.5 9.0 9.5 9.6 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

12 18 24 30 33 36 36 39 39 43 43 47 52 52 52 52 57 57 63 69 69 69 69 75 75 81 81 87 87 87 87 94 94 101 101 101

34 40 49 57 61 65 65 70 70 75 75 80 86 86 86 86 93 93 101 109 109 109 109 109 109 125 125 133 133 133 133 142 142 151 151 151

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

1.0 1.5 2.0 2.5 3.0 3.3 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0

12 18 24 30 33 36 39 43 47 52 57 57 63 69

34 40 49 57 61 65 70 75 80 86 93 93 101 109

2 2 2 2 2 2 2 2 2 2 2 2 1 1

Total Pack Length (mm) Qty

Tubes HSSR1 HSSR15 HSSR2 HSSR25 HSSR3 HSSR32 HSSR33 HSSR35 HSSR36 HSSR4 HSSR42 HSSR45 HSSR48 HSSR49 HSSR5 HSSR52 HSSR55 HSSR6 HSSR65 HSSR68 HSSR7 HSSR72 HSSR75 HSSR8 HSSR85 HSSR9 HSSR95 HSSR96 HSSR100 HSSR102 HSSR105 HSSR110 HSSR115 HSSR120 HSSR125 HSSR130

132

Drill Ø (mm)

Flute Length (mm)

8.0 8.5 9.0 10.0 11.0 12.0 13.0

75 75 81 87 94 101 101

Total Pack Length (mm) Qty

Packs

Packs HSSRR1 HSSRR15 HSSRR2 HSSRR25 HSSRR3 HSSRR33 HSSRR35 HSSRR4 HSSRR45 HSSRR5 HSSRR55 HSSRR6 HSSRR65 HSSRR7

Product Code

HSSRR8 HSSRR85 HSSRR9 HSSRR100 HSSRR110 HSSRR120 HSSRR130

109 117 125 133 142 151 151

1 1 1 1 1 1 1

IMPERIAL Product Code

Drill Ø (Imp.)

Flute Length (Imp.)

1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 7/32 1/4 17/64 5/16 3/8 1/2

7/8 1 11/4 11/2 15/8 13/4 2 21/8 25/16 21/2 23/4 27/8 33/16 35/8 41/2

Total Pack Length (Imp.) Qty

Tubes HSIR116 HSIR564 HSIR332 HSIR764 HSIR18 HSIR964 HSIR532 HSIR1164 HSIR316 HSIR732 HSIR14 HSIR1764 HSIR516 HSIR38 HSIR12

17/8 2 21/4 25/8 23/4 27/8 31/8 31/4 31/2 33/4 4 41/8 41/2 5 6

10 10 10 10 10 10 10 10 10 10 10 10 5 5 5

DRILL SETS A comprehensive selection of HSS drills ranging between 1.0mm to 10.0mm in 0.5mm increments.

Product Code

Description

HSSR19DS HSSR25DS

19pcs. 1-10mm (increments of 0.5mm) 25pcs. 1-13mm (increments of 0.5mm)

HSSR170DS

170pcs. x10pcs.1-8mm (increments of 0.5mm) x5pcs. 8.5-10mm (increments of 0.5mm)

BLACKSMITH DRILL / STUB DRILL

BLACKSMITHS DRILL

DRILLING Materials

Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance when drilling larger diameter holes into all non-alloy materials. Can be used in a 1/2” chuck. Product Code

Drill Ø (mm)

Flute Length (mm)

Total Length (mm)

13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 22.0 24.0 25.0

75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75

160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160

Singles BS135 BS14 BS145 BS15 BS155 BS16 BS165 BS17 BS175 BS18 BS185 BS19 BS195 BS20 BS22 BS24 BS25

STUB DRILL

Materials

Drill Ø (mm)

Flute Length (mm)

3.2 3.3 4.0 4.1 4.2 4.9 5.0 5.1

18 18 22 22 22 26 26 26

Total Pack Length (mm) Qty

Packs HSSGS32 HSSGS33 HSSGS4 HSSGS41 HSSGS42 HSSGS49 HSSGS5 HSSGS51

49 49 55 55 55 62 62 62

10 10 10 10 10 10 10 10

133

DRILLING

DRILL SETS

BRAD POINT SET

CARPENTERS KIT

15 PIECE SET

(SPEED AUGERS & FLAT WOOD BITS)

A 15 piece mixed selection of the most popular Brad Point wood drill sizes. Sold in a robust weatherproof case.

Contains three four flute speed augers for rapid chip ejection and cleaner drilling and two flat bits for larger holes.

Product Code

Drill Ø (mm)

Working L (mm)

Total L (mm)

Qty

B15SET

3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0 10.0

37 45 45 55 60 60 60 65 67 77 80

60 70 75 80 85 90 90 95 100 110 120

3 2 2 1 1 1 1 1 1 1 1

CKIT

16.0 20.0 25.0 32.0 40.0

159 159 159 152 152

Drill Type

Qty

Speed Auger Speed Auger Speed Auger Flat Wood Bit Flat Wood Bit

3 2 2 1 1

FLAT WOOD BIT SETS

METAL DRILL SET

A selection of quick release flat wood drills. Quick release feature ensures a rapid change of bit. Sold in a robust weatherproof case.

A 15 piece mixed selection of the most popular HSS Ground Metal Drills with a 135° quick start split point. Sold in a robust weatherproof case.

7 PIECE SET

Product Code F7SET

134

Product Drill Ø Total Code (mm) L (mm)

Drill Ø (mm)

Total L (mm)

Qty

10.0 12.0 16.0 19.0 22.0 25.0 32.0

152 152 152 152 152 152 152

1 1 1 1 1 1 1

15 PIECE SET

Product Code HSS15SET

Drill Ø (mm)

Working L (mm)

Total L (mm)

Qty

1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.5 5.0 6.0 8.0 10.0

18 24 30 33 36 39 43 47 52 57 75 87

40 49 57 61 65 70 75 80 86 93 117 133

2 2 2 1 1 1 1 1 1 1 1 1

DRILL SETS / BROACHING CUTTER

MASONRY & METAL SET 17 PIECE SET

MIX17SET

Materials

Drill Ø Working Total (mm) L (mm) L (mm) 1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.5 4.8 5.0 5.5 6.0 5.0 5.5 6.0 7.0 10

BROACHING CUTTER Manufactured from a high grade M2 tool steel for drilling heavy gauge non-alloy materials, with magnetic drills. Pilot rod must be used to prevent drifting.

A mixed selection of 17 HSS Ground Metal Drills with a 135° quick start split point and 5 carbide tipped Masonry Drills. Sold in a robust weatherproof case. Product Code

DRILLING

18 24 30 33 36 39 43 47 55 55 60 65 50 50 60 60 75

40 49 57 61 65 70 75 80 85 86 93 93 85 85 100 100 120

Product Code

Drill Type

Qty

HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS Masonry Masonry Masonry Masonry Masonry

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

MASONRY DRILL SET

15 PIECE SET A mixed selection of 15 carbide tipped Masonry Drills. The range covers the most popular hole sizes for plastic plugs. Sold in a robust weatherproof case.

Cutter Ø (mm)

Cutter Depth (mm)

30mm Short Reach - Singles BCS12 BCS13 BCS14 BCS15 BCS16 BCS17 BCS18 BCS19 BCS20 BCS21 BCS22 BCS23 BCS24 BCS25 BCS26 BCS27 BCS28 BCS29 BCS30 BCS31 BCS32 BCS33 BCS35 BCS36 BCS38 BCS39 BCS40 BCS50

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 36 38 39 40 50

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

50mm Long Reach - Singles

Product Code

Drill Ø (mm)

Working L (mm)

Total L (mm)

Qty

M15SET

4.0 5.0 5.5 6.0 7.0 8.0 10.0

45 50 50 60 60 75 75

75 85 85 100 100 120 120

1 2 3 2 3 2 2

BCL12 BCL13 BCL14 BCL15 BCL16 BCL17 BCL18 BCL20 BCL21 BCL22 BCL24 BCL26 BCL28 BCL30 BCL32 BCL39

12 13 14 15 16 17 18 20 21 22 24 26 28 30 32 39

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

Replacement Pins - Singles BCL301250 BCL501250

12-50 12-50

30 50

135

DRILLING

COUNTERSINKS / CONE CUTTER / STEP DRILL

DE-BURRING COUNTERSINK

3 FLUTE COUNTERSINK

A single flute countersink designed for general purpose countersinking, chamfering or de-burring in alloy and non-alloy metals, timber and man-made boards.

These engineering quality countersinks drill a precise recess to allow a fastener head to sit flush in alloy and non-alloy metals, timber and man-made boards.

Materials

Product Code

Ø (mm)

Singles CS25 CS510 CS1015 CS1520

Ø (mm)

Screw Ø (mm)

Screw Ø (imp.)

6.3 8.3 10.4 12.4 16.5 20.5 25.0

3.0 3.5-4.0 4.5-5.0 6.0 8.0 -

4-5 6-8 10 12 16 -

Singles 2 to 5 5 to 10 10 to 15 15 to 20

CS63 CS83 CS104 CS124 CS165 CS205 CS250

CONE CUTTER

STEP DRILL

For drilling, enlarging and de-burring holes in thin sheet metal up to a thickness of 2mm

Ideal for drilling, enlarging or de-burring a precise hole into thin materials such as alloy and non-alloy metals up to a thickness of 4mm.

Materials

Product Code

Ø (mm)

Singles CC314 CC520 CC531 CC1631

136

Product Code

Ø (mm)

Singles 3 to 14 5 to 20 5 to 31 16 to 31

SD412 SD420 SD430 SD439

4,5,6,7,8,9,10,11,12 4,6,8,10,12,14,16,18,20 4,6,8,10,12,15,18,20,22,24,26,28,30 4,6,8,10,12,21,25,27,30,33,36,39

CUP AND WHEEL BRUSHES

DRILLING

NYLON CUP BRUSH

NYLON WHEEL BRUSH

The nylon brush is less aggressive and an ideal option for light de-burring, polishing and finishing.

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

Product Code

50SCN 75SCN

50 75

1/4” Hex 1/4” Hex

1.2 1.2

4,500 4,500

75SWN 100SWN

CRIMPED STEEL WIRE CUP BRUSH The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

75 100

1/4” Hex 1/4” Hex

1.2 1.2

4,500 4,500

CRIMPED STEEL WIRE BRUSH The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material. Materials

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

50SCC 75SCC

50 75

1/4” Hex 1/4” Hex

0.3 0.3

4,500 4,500

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

50SWC 75SWC 100SWC

50 75 100

1/4” Hex 1/4” Hex 1/4” Hex

0.3 0.3 0.3

4,500 4,500 4,500

CRIMPED STEEL WIRE END BRUSH

TWIST KNOT STEEL WIRE WHEEL BRUSH

The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt.

Materials

Product Code

(mm)

25SEC

Shaft

Wire Thickness

Max R.P.M

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M

1/4” Hex

0.3

4,500

75SWT

1/4"

0.3

4,500

137

DRILLING

138

CUP AND WHEEL BRUSHES

CRIMPED STEEL WIRE CUP BRUSH

CRIMPED STAINLESS STEEL WIRE CUP BRUSH

The crimped wire is ideal for lightly removing loose paint, rust or dirt without scarring the base material.

Suitable for use with angle grinders when cleaning and polishing stainless steel and aluminium.

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

Product Code

75TCC 100TCC 125TCC 150TCC

75 100 125 150

M14 M14 M14 M14

0.3 0.3 0.3 0.3

12,500 8,500 6,500 6,500

75TCCSS 100TCCSS

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

75 100

M14 M14

0.5 0.5

8,500 8,500

TWISTED KNOT STEEL WIRE CUP BRUSH

TWISTED KNOT STAINLESS STEEL WIRE CUP BRUSH

The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt.

The twist brush is ideal for aggressive removal. Suitable for stainless steel and aluminium.

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

Product Code

80TCT 100TCT

80 100

M14 M14

0.5 0.5

8,500 8,500

100TCTSS

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

100

M14

0.5

8,500

CRIMPED STEEL WIRE BEVEL BRUSH

CRIMPED STAINLESS STEEL WIRE BEVEL BRUSH

Ideal for lightly removing large areas of loose paint, rust or dirt without scarring the base material.

Suitable for cleaning and polishing large areas of stainless steel and aluminium.

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

Product Code

115TBC

115

M14

0.3

12,500

115TBCSS

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

115

M14

0.3

12,500

CUP AND WHEEL BRUSHES

DRILLING

TWISTED KNOT STEEL WIRE BEVEL BRUSH

TWISTED KNOT STAINLESS STEEL WIRE BEVEL BRUSH

The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt.

The twist brush is ideal for aggressive removal. Suitable for stainless steel and aluminium.

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

Product Code

100TBT

100

M14

0.5

12,500

100TBTSS

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

100

M14

0.5

12,500

TWISTED KNOT STEEL WIRE BRUSH

TWISTED KNOT STAINLESS STEEL WIRE BRUSH

The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt.

The twist brush is ideal for aggressive removal. Suitable for stainless steel and aluminium.

Materials

Product Code

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

Product Code

115TWT

115

M14

0.5

12,500

115TWTSS

Ø (mm)

Shaft

Wire Thickness

Max R.P.M.

115

M14

0.5

12,500

TWISTED KNOT STEEL WIRE WHEEL BRUSH

STEEL WIRE WHEEL BRUSH WITH PLASTIC REDUCER SET

The twist brush is ideal for aggressive removal of paint, rust, rubber, concrete or dirt.

Suitable for use with a bench grinder when cleaning and polishing metal surfaces.

Materials

Product Code

(mm)

125HWT

125

Shaft

Wire Thickness

Max R.P.M.

Product Code

0.5

12,500

150HWC 200HWC

Ø (mm)

150 200

Shaft

Wire Thickness

Max R.P.M.

32 32

0.3 0.3

6,000 4,500

139

DRILLING

CHUCKS, KEYS ADAPTOR SETS

CHUCK, KEY AND ADAPTOR SETS

Traditional Chuck

Heavy Duty Key-less Chuck

Super Heavy Duty Chuck

SOLD IN SETS

3/8” TRADITIONAL CHUCK & KEY SET A traditional keyed chuck that fits drills with 3/8” shaft, sold with a key. Suitable for 1.5mm – 10mm drills bits. Product Code C10

Capacity (mm/mount)

A traditional keyed chuck that fits drills with ½” shaft, sold with a key. Suitable for 1.5mm – 13mm drills bits. * SDS plus adaptor only with KEY

C13 KEY*

SOLD INDIVIDUALY

HEAVY DUTY KEY-LESS CHUCK A key-less hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Suitable for 1.5mm – 13mm drills bits. Product Code

Capacity (mm/mount)

HDKC13

1.5 - 13mm, 1/2” x 20F

Capacity (mm/mount) 1.5 - 13mm, 1/2” x 20F 1.5 - 13mm, 1/2” x 20F

SUPER HEAVY DUTY CHUCK A key-less heavy duty hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 1000 watt. Suitable for 1.5mm – 13mm drills bits. Product Code

Capacity (mm/mount)

SHDKC

1.5 - 13mm, 1/2” x 20F

SINGLE HANDED KEY-LESS CHUCK

HEAVY DUTY KEY-LESS CHUCK AND SDS+ ADAPTER SET

A key-less single hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Suitable for 1.5mm – 13mm drills bits.

A key-less hand-tightened three jaw chuck that fits drills with ½” shaft. Ideal for impact drills up to 750 watt. Sold with an SDS plus adaptor. Suitable for 1.5mm – 13mm drills bits.

Product Code

Capacity (mm/mount)

SHKC13

1.5 - 13mm, 1/2” x 20F

Product Code KKEY

140

SDS+ Adapter and Chuck Key

1.5 - 10mm, 3/8” x 24F

1/2” TRADITIONAL CHUCK, KEY & SDS+ ADAPTER SET

Product Code

Single Handed Key-less Chuck

Capacity (mm/mount) 1.5 - 13mm, 1/2” x 20F

CHUCK KEY & SDS+ ADAPTER Product Code

Type

To Fit

AS2 SDSCA

Key SDS+

To fit 1/2” keyed chuck SDS plus to 1/2” x 20M

CUTTING 142 - HOLESAWS 143 - HOLESAW ACCESSORIES 144 - HOLESAW KITS 145 - DRY DIAMOND CORE BITS 145 - DIAMOND CORE ACCESSORIES 147 - DIAMOND BLADES 148 - CERAMIC BLADES 148 - MORTAR RAKING BLADES 149 - CUP GRINDING WHEELS 149 - BONDED ABRASIVE DISCS 150 - RECIPROCATING SAW BLADES 152 - JIGSAW BLADES 155 - MULTI-TOOL BLADES 159 - CIRCULAR SAW BLADES

CUTTING

HOLESAWS

VARIABLE PITCH HOLESAW

Materials

Variable pitch tooth pattern helps clear dust more efficiently and gives superior cutting performance. High quality M3 grade HSS steel cutting edge and compatible with most makes of arbour.

Product Saw Threaded Code Ø (mm) Mount (inch)

Arbor to Suit

Singles HS14 HS16 HS17 HS19 HS20 HS21 HS22 HS24 HS25 HS27 HS29 HS30 HS32 HS35 HS37 HS38 HS40 HS41 HS43 HS44 HS46 HS48 HS51 HS52 HS54

Product Saw Threaded Code Ø (mm) Mount (inch)

Arbor to Suit

Singles 14.0 16.0 17.0 19.0 20.0 21.0 22.0 24.0 25.0 27.0 29.0 30.0 32.0 35.0 37.0 38.0 40.0 41.0 43.0 44.0 46.0 48.0 51.0 52.0 54.0

1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18

AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2

HS57 HS60 HS64 HS65 HS67 HS68 HS70 HS73 HS76 HS79 HS83 HS86 HS89 HS92 HS95 HS98 HS102 HS105 HS108 HS111 HS114 HS121 HS127 HS140 HS152

57.0 60.0 64.0 65.0 67.0 68.0 70.0 73.0 76.0 79.0 83.0 86.0 89.0 92.0 95.0 98.0 102.0 105.0 108.0 111.0 114.0 121.0 127.0 140.0 152.0

1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18 1/2 - 18

AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2

HSS Bi-METAL HOLESAW KITS ELECTRICIAN KIT HANDYMAN KIT PLUMBER KIT 142

SEE PAGE 144

HOLESAWS

CONSTANT PITCH HOLESAW

CUTTING Materials

Constant pitch tooth pattern ensures smooth cutting and less “chatter” when drilling metal. High quality M42 grade 8% Cobalt HSS steel cutting edge and compatible with most makes of arbor.

Product Saw Threaded Code Ø (mm) Mount (inch)

Arbor to Suit

Product Saw Threaded Code Ø (mm) Mount (inch)

Singles HSC14 HSC16 HSC17 HSC20 HSC22 HSC25 HSC27 HSC30 HSC32 HSC35 HSC37 HSC40 HSC43 HSC46 HSC48

Arbor to Suit

Singles 14.0 16.0 17.0 20.0 22.0 25.0 27.0 30.0 32.0 35.0 37.0 40.0 43.0 46.0 48.0

1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 1/2 - 20 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18

AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA4, AA1, SDSA1 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2

HSC51 HSC60 HSC64 HSC68 HSC70 HSC76 HSC79 HSC86 HSC89 HSC95 HSC102 HSC108 HSC111 HSC160 HSC165 HSC210

51.0 60.0 64.0 68.0 70.0 76.0 79.0 86.0 89.0 95.0 102.0 108.0 111.0 160.0 165.0 210.0

5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18 5/8 - 18

HPD

HPDL

AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2 AA2, SDSA2

HOLESAW ACCESSORIES

AA4 Product Code

AA1

AA2

SDSA1

For Holesaw Dia. (mm)

Shank

Thread Shank

Product Code

14-30 14-30 32-210 14-30 32-210

Hex 9.5 Hex 11 Hex 11 SDS Plus SDS Plus

1/2” x 20 1/2” x 20 5/8” - 18 1/2” x 20 5/8” - 18

HPD HPDL HPDC HSE

Singles AA4 AA1 AA2 SDSA1 SDSA2

SDSA2

HPDC

HSE

Description

Length (mm)

HSS Pilot drill HSS Long pilot drill HSS Cobalt drill Extension rod for AA2 (arbor)

75 105 75 300

Singles

143

CUTTING

144

HOLESAW KITS

PLUMBERS KIT

ELECTRICIANS KIT

6 HSS M3 variable pitch holesaws sizes and 2 arbors. The range covers the most popular hole sizes to accommodate metric pipes.

7 HSS M3 variable pitch holesaw sizes and 2 arbors. Range covers the most popular hole sizes used when installing down-lights, conduit and wiring.

Product Code

Size (mm)

Product Type

Kit Qty

HSKITPL

17.0 24.0 30.0 34.0 43.0 52.0 14-30 32-210

Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)

1 1 1 1 1 1 1 1

Product Code

Size (mm)

Product Type

Kit Qty

HSKITEL

22.0 27.0 38.0 56.0 67.0 72.0 76.0 14-30 32-210

Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)

1 1 1 1 1 1 1 1 1

HANDY MAN KIT

CARPENTERS KIT

A mixed selection of 10 HSS M3 variable pitch holesaws and arbors. The range covers the most popular holesaw sizes.

(SPEED AUGERS & FLAT WOOD BITS) Contains three four flute speed augers for rapid chip ejection and cleaner drilling and two flat bits for larger holes.

Product Code

Size (mm)

Product Type

Kit Qty

HSKITHA

17.0 20.0 25.0 30.0 38.0 43.0 52.0 72.0 14-30 32-210

Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Holesaw Arbor (AA1) Arbor (AA2)

1 1 1 1 1 1 1 1 1 1

Product Drill Ã&#x2DC; Total Code (mm) L (mm)

Drill Type

Qty

16.0 20.0 25.0 32.0 40.0

Speed Auger Speed Auger Speed Auger Flat Wood Bit Flat Wood Bit

3 2 2 1 1

CKIT

159 159 159 152 152

DIAMOND CORE BITS

DIAMOND CORE BIT

CUTTING Materials

Manufactured using laser-welded technology, these cores have been specifically designed to drill large clean holes in masonry and concrete block. FOR ROTARY USE ONLY. Product Code

Drill Ø (mm)

Length (mm)

Height (mm)

22 28 32 38 48 52 65 78 82 91 107 117 127 152

300 300 150 150 150 150 150 150 150 150 150 150 150 150

10 10 10 10 10 10 10 10 10 10 10 10 10 10

Singles GPCP22300 GPCP28300 GPCP32150 GPCP38150 GPCP48150 GPCP52150 GPCP65150 GPCP78150 GPCP82150 GPCP91150 GPCP107150 GPCP117150 GPCP127150 GPCP152150

DIAMOND CORE KIT Five of the most popular sizes with all the accessories required in a aluminium case. NOTE: Ideally suited to lightweight building materials up to 10n/mm2.

Product Code

Size/ To Fit (mm)

PDCK5

38 52 65 117 127 1/2” BSP 1/2” BSP 1/2” BSP 8 8

Length Description (mm) 150 150 150 150 150 240 88 115 200 75

Diamond Core Diamond Core Diamond Core Diamond Core Diamond Core Extension Hex Adaptor SDS Adaptor Pilot Drill Taper Drift

Kit Qty 1 1 1 1 1 1 1 1 1 1

145

CUTTING

DIAMOND CORE ACCESSSORIES

DRY DIAMOND CORE ACCESSORIES BSP EXTENSION Product Code

Overall Length (mm)

Fit

240

1/2” BSP

Singles

An ½” BSP thread extension rod used where there is need for a deeper hole.

DCE240P

HEX ADAPTOR

SDS ADAPTOR

An ½” Hex with ½” BSP (male) thread, for use with a standard core drill. Available in 88mm and 240mm lengths.

An SDS Plus with ½” BSP (male) thread, for use with an SDS-Plus drill, when in rotary mode only. Available in 115mm and 240mm lengths.

Product Code

Overall Length (mm)

Fit

88 240

1/2” BSP 1/2” BSP

Singles DCAH88P DCAH240P

Overall Length (mm)

Fit

115 240

1/2” BSP 1/2” BSP

Singles DCAS115P DCAS240P

PILOT DRILL

PILOT ROD

Morse taper TCT masonry drill bit used to prevent the core drifting.

Morse taper rod used once a hole has been drilled to prevent the core drifting.

Product Code

Drill Ø (mm)

Length (mm)

Product Code

210

Singles DCPD13210

Ø (mm)

Length (mm)

DCPR225

225

Product Code

Ø (mm)

Length (mm)

Singles

TAPER DRIFT Used for knocking morse taper tools out of spindles and sockets.

146

Singles DCTD

DIAMOND BLADES

CUTTING

CHIMAERA MULTI-MATERIAL BLADE

PREMIUM LASER WELDED BLADE

A high quality multi-material blade designed for cutting construction materials. Continuous rim turbo segmented blade for smooth cutting of construction material and reinforced concrete. Re-inforced centre to stop warping.

A premium quality laser welded, turbo segmented blade. For use in building materials such as concrete, common bricks, paving slabs, kerbs, lintels, clay roof tiles and natural stone.

Materials

Product Code

Disc Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

Singles MM115222 MM125222 MM230222 MM30020 MM300222 MM35020 MM350254

Product Code

Disc. Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

Singles 115 125 230 300 300 350 350

4 1/2 5 9 12 12 14 14

22.2 22.2 22.2 20.0 22.2 20.0 25.4

10 10 10 10 10 10 10

GPPL115222 GPPL125222 GPPL230222 GPPL30020 GPPL300222 GPPL35020 GPPL350254 GPPL450254

115 125 230 300 300 350 350 450

4 1/2 5 9 12 12 14 14 18

22.2 22.2 22.2 20.0 22.2 20.0 25.4 25.4

12 12 12 12 12 12 12 12

LASER WELDED BLADE

SINTERED BLADE

A cost effective laser welded blade with longer life than the sintered blades. Perfect for medium density building materials. eg. Concrete, common bricks, paving, kerbs, lintels, clay roof tiles and natural stone.

An economic product for cutting medium density building materials such as common bricks, paving slabs, kerbs and lintels.

Materials

Product Code

Disc. Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

Singles GPL115222 GPL125222 GPL230222 GPL30020

Product Code

Disc. Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

Singles 115 125 230 300

41/2 5 9 12

22.2 22.2 22.2 20.0

10 10 10 10

GPE115222 GPE230222 GPE30020

115 230 300

41/2 9 12

22.2 22.2 20.0

7 7 7

147

CUTTING

DIAMOND BLADES

CERAMIC THIN TURBO BLADE

A top quality blade for cutting porcelain, ceramics and marble. Continuous turbo design for minimal chipping of the material, while the special thin body reduces resistance and increases speed of cut.

A cost effective blade for cutting porcelain, ceramics and marble. Continuous rim for minimal chipping of the material

Materials

Product Code

Disc. Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

Singles TP115222

Disc. Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

Singles 115

4 1/2

22.2

TE10016 TE115222

100 115

4 4 1/2

16.0 22.2

5 5

MORTAR RAKING SILVER BRAZED BLADE

MORTAR RAKING SINTERED BLADE

A top quality product with 10mm silver brazed segments for a long service life.

An economic product with 7mm sintered segments.

Materials

Product Code

Disc. Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

Singles MRP115 MRP125

148

Product Code

Disc. Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

Singles 115 125

4 1/2 5

22.2 22.2

10 10

MRE115 MRE125

115 125

4 1/2 5

22.2 22.2

7 7

DIAMOND BLADES

CUTTING

CUP GRINDING WHEEL

A double row, silver brazed wheel for smoothing and removing shutter marks from medium density concrete.

Materials

Product Code

Disc. Ø Disc Bore Segment (mm) (inch) (mm) Height (mm)

SDS PLUS STEELS • HEAT TREATED • SHOT BLAST FINISH

Point

Singles CGDE115

115

4 1/2

22.2

Tile

Spade

Gouge

SEE PAGE 121

BONDED ABRASIVE DISC Used for cutting or grinding various types of metals. 1.0mm & 1.9mm are ideal for cutting stainless steel.

FOR CUTTING

FOR GRINDING

Materials

Product Code

Disc. Ø (mm)

Bore Thickness Max (mm) (mm) RPM

Product Code

22.2 22.2 20.0 22.2 22.2 22.2

DGM11522

Singles FCM115222 FCM230222 FCM30020 FCMT115222 FCMT125222 FCMT230222

Disc. Ø (mm)

Bore Thickness Max (mm) (mm) RPM

Singles 115 230 300 115 125 230

2.5 3.2 3.2 1.0 1.0 1.9

13,300 6,500 5,000 13,300 12,200 6,500

115

22.2

6.4

13,300

149

CUTTING

RECIPROCATING SAW BLADES

RECIPROCATING SAW BLADES Reciprocating saw blades, also known as sabre saw blades cut a wide range of materials Materials

SOFTWOOD

GREEN WOOD

PLASTIC

DRYWALL

BLOCK/BRICK

STEEL

SHEET METAL

SANDWICH

STAINLESS STEEL

NON-FERROUS

MSS

MWS

SSS

GTG

MILLED AND SIDE SET

MILLED AND WAVY SET

SIDE SET AND SHARPENED

GROUND/TAPER GROUND

ROUGH/COARSE

FINE/MEDIUM

FAST/MEDIUM

CLEAN/QUICK

Basic tooth pattern used on the entry level blades. A quick but fairly rough cut.

This pattern is used to give a fine, straight cut. It appears on wood cutting blades.

This configuration gives a fast, medium cut.

These top quality blades give a clean, quick cut in both wood and plastic.

HIGH CARBON STEEL BLADES - WOOD CUTTING High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. (A3021-150)

(A3029-240)

Product Code

Bosch Equiv.

Materials

Cut Type

Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

Qty

S644D S1531L

Wood / Plastic / Sandwich Green Wood

Straight Cut Straight Cut

SSS SSS

130 220

150 240

6.0 - 100 <190

6 6

5 5

Packs A3021-150 A3029-240

WL - WORKING LENGTH

TL - TOTAL LENGTH

T.P.I - TEETH PER LENGTH

TUNGSTEN CARBIDE-TIPPED BLADE - BLOCK/BRICK CUTTING Combining the flexibility of a HCS body with TCT cutting edge, resulting in a tough blade which keeps its edge.

(AB305-215)

Product Code

Bosch Equiv.

Materials

Cut Type

Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

215

305

<215

Qty

Packs AB305-215

S1243HM Aircrete Block / Some Bricks Straight Cut

MSS

WL - WORKING LENGTH

150

TL - TOTAL LENGTH

1 T.P.I - TEETH PER LENGTH

RECIPROCATING SAW BLADES

CUTTING

BI-METAL BLADES Combining the flexibility of a HCS body with a HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge.

LONGER SERVICE LIFE! WOOD CUTTING BLADES (A3021-300BI)

Product Code

Bosch Equiv.

Materials

Cut Type

Teeth Type

All Wood / Plastic

Straight Cut

MSS

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

280

300

<250

Qty

Packs A3021-300BI S1411DF

WL - WORKING LENGTH

TL - TOTAL LENGTH

5 T.P.I - TEETH PER LENGTH

WOOD WITH METAL CUTTING (DEMOLITION BLADES) (A3020-150)

Product Code

Bosch Equiv.

Materials

Cut Type

Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

Qty

S610VF S1110VF

Wood with Metal (Nails) Wood with Metal (Nails)

Straight Cut Straight Cut

MSS MSS

130 205

150 228

<100 <175

5-8 5-8

5 5

Packs A3020-150 A3020-228

WL - WORKING LENGTH

TL - TOTAL LENGTH

T.P.I - TEETH PER LENGTH

METAL CUTTING BLADES (A3018-280)

Bosch Equiv.

Materials

Cut Type

Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

Qty

A3018-280

Steel / SS / Non-Ferrous

Straight Cut

MWS

260

280

3.5 - 5.0

A3013-150

S922BF

Steel / SS / Non-Ferrous

Straight Cut

MWS

130

150

2.5 - 3.5

A3013-200

S1122BF

Steel / SS / Non-Ferrous

Straight Cut

MWS

180

225

2.5 - 3.5

A3015-150

S922AF

Steel / Sheet Metal

Straight Cut

MWS

130

150

0.7 - 3.0

A3015-200

S1122AF

Steel / Sheet Metal

Straight Cut

MWS

180

225

0.7 - 3.0

A3014-150

S922EF

Steel / Stainless Steel

Straight Cut

MWS

130

150

1.5 - 4.0

A3014-200

S1122EF

Steel / Stainless Steel

Straight Cut

MWS

205

225

1.5 - 4.0

Product Code

Packs

WL - WORKING LENGTH

TL - TOTAL LENGTH

5 T.P.I - TEETH PER LENGTH

151

CUTTING

JIGSAW BLADES

JIGSAW BLADES A comprehensive range of jigsaw blades to cover a multitude of cutting requirements into wood, metal and plastic.

Materials

SOFTWOOD

HARDWOOD

LAMINATE

DRYWALL

PLASTIC

STEEL

SHEET METAL

SANDWICH

ALUMINIUM

STAINLESS STEEL

NON-FERROUS

MSS

MWS

SSS

GTG

MILLED & SIDE SET

MILLED & WAVY SET

SIDE SET & SHARPENED

GROUND/TAPER GROUND

ROUGH/COARSE

FINE/MEDIUM

FAST/MEDIUM

CLEAN/QUICK

Basic tooth pattern used on the entry level blades. A quick but fairly rough cut.

This pattern is used to give a fine, straight cut. It appears on wood cutting blades such as the AHW12 (T119B) and the metal cutting AMG11 (T118A).

This configuration gives a fast, medium cut and is used on blades such as the AHGS14 (T144D).

These top quality blades give a clean, quick cut in both wood and plastic.

BI-METAL BLADES

LONGER SERVICE LIFE!

Combining the flexibility of a HCS body with a HSS hardened cutting edge, resulting in a tough, shatter resistant blade which keeps its edge. Longer service life leads to greater cost effectiveness per blade.

Down Cut Blade - Reversed teeth to cut on the down-stroke. This prevents the splintering of decorative surfaces such as kitchen worktops.

(AHC12RBI)

WOOD CUTTING - BI-METAL BLADES Product Code

Bosch Equiv.

Materials

Cut Type

Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

Qty

Packs AHGS14BI

T144DF

All Wood

Straight Cut

SSS

100

5.0 - 50.0

6.35

AHC12BI

T101BF

All Wood / Plastic

Straight Cut

GTG

100

3.0 - 30.0

Laminate

Down Cut

GTG

100

3.0 - 30.0

AHC12RBI T101BRF

WL - WORKING LENGTH

TL - TOTAL LENGTH

5 T.P.I - TEETH PER LENGTH

METAL CUTTING - BI-METAL BLADES Product Code

Bosch Equiv.

Materials

Cut Type

Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

Qty

Packs AMG11BI

T118AF

Steel / SS

Straight Cut

MWS

1.2 - 2.0

AMG12BI

T118BF

Steel / SS / Alu. / N-F

Straight Cut

MWS

2.5 - 6.0

WL - WORKING LENGTH

152

TL - TOTAL LENGTH

5 T.P.I - TEETH PER LENGTH

JIGSAW BLADES

CUTTING

WOOD CUTTING - HIGH CARBON STEEL BLADES High Carbon Steel Blades for use with softer materials, such as hard and soft wood, plastics and laminated boards. (AHGS24)

(AHC14D)

(AHC12R)

Product Code

Bosch Equiv.

Materials

Cut Type

Curve Cut Blade - These blades have a reduced blade depth to allow them to perform curved cuts more easily. Precision Blade - These blade are made from a thicker plate to help achieve a 900 cut. It also makes this blade ideal for hardwood. Down Cut Blade - Reversed teeth to cut on the down-stroke. This prevents the splintering of decorative surfaces such as kitchen worktops. Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

Qty

Packs AHG13

T111C

Softwood / Plastic

Straight Cut

MSS

100

4.0 - 50.0

8.5

AHW12

T119B

Softwood / Insulation Mat.

Straight Cut

MWS

2.0 - 15.0

AHW12K

T119BO

Softwood / Insulation Mat.

Curve Cut

MWS

1.5 - 15.0

AHGS14

T144D

All Wood Types

Straight Cut

SSS

100

5.0 - 50.0

6.35

AHGS24

T244D

All Wood Types

Curve Cut

SSS

100

5.0 - 50.0

6.35

AHC14

T101D

All Wood / Plastic

Straight Cut

GTG

100

10.0 - 45.0

6.35

AHC12

T101B

All Wood / Plastic

Straight Cut

GTG

100

3.0 - 30.0

AHC14D

T101DP

All Wood / Plastic

Precision Cut

GTG

100

10.0 - 45.0

6.35

AHC12K

T101AO

Softwood / Laminate

Curve Cut

GTG

1.5 - 15.0

AHC12R

T101BR

Wood / Laminate / Plastic

Down Cut

GTG

100

3.0 - 30.0

AHC32R

Wood / Laminate / Plastic

Down Cut

GTG

105

130

3.0 - 65.0

WL - WORKING LENGTH

TL - TOTAL LENGTH

5 T.P.I - TEETH PER LENGTH

METAL CUTTING - HIGH SPEED STEEL BLADES Hardened steel designed to cut hard materials such as mild steel, aluminium and other non-ferrous metals.

(AK24)

Curve Cut Blade - These blades have a reduced blade depth to allow them to perform curved cuts more easily.

Bosch Equiv.

Materials

Cut Type

Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

T.P.I

Qty

AK14

T127D

N-F / Alu. / Steel / Plastic

Straight Cut

MSS

100

3.0 - 15.0

8.5

AK24

T227D

N-F / Alu. / Steel / Plastic

Curve Cut

MSS

100

3.0 - 15.0

8.5

AMG107

T118G

Very Thin Sheet Metal

Straight Cut

MWS

0.5 - 1.5

AMG11

T118A

Thin Sheet of Steel or SS

Straight Cut

MWS

1.2 - 3.0

AMG21

T218A

Thin Sheet / Steel

Curve Cut

MWS

1.2 - 2.0

AMG12

T118B

Steel / SS / N-F / Alu.

Straight Cut

MWS

2.5 - 6.0

AMG31

T318A

Pipes / Profiles

Straight Cut

MWS

105

130

1.0 - 3.0

AMG32

T318B

Steel / N-F / Pipes

Straight Cut

MWS

105

130

2.5 - 6.0

Product Code

Packs

WL - WORKING LENGTH

TL - TOTAL LENGTH

5 T.P.I - TEETH PER LENGTH

153

CUTTING

JIGSAW BLADE SET

JIGSAW BLADE SET - 13 PCS Comprehensive set of jigsaw blades to cover a multitude of cutting requirements into wood, metal and plastic.

Materials

SOFTWOOD

LAMINATE

PLASTIC

STEEL

SHEET METAL

SANDWICH

ALUMINIUM

STAINLESS STEEL

NON-FERROUS

MSS

MWS

SSS

GTG

MILLED & SIDE SET

MILLED & WAVY SET

SIDE SET & SHARPENED

GROUND/TAPER GROUND

ROUGH/COARSE

FINE/MEDIUM

FAST/MEDIUM

CLEAN/QUICK

Basic tooth pattern used on the entry level blades. A quick but fairly rough cut.

This pattern is used to give a fine, straight cut. It appears on wood cutting blades such as the AHW12 (T119B) and the metal cutting AMG11 (T118A).

This configuration gives a fast, medium cut and is used on blades such as the AHGS14 (T144D).

These top quality blades give a clean, quick cut in both wood and plastic.

SET CONTENTS (AHG13)

(AHGS14)

(AHC12)

(AHC14)

(AHC12R)

(AHW12K)

(AMG11)

(AMG12)

Bosch Equiv.

Materials

Cut Type

Teeth Type

WL (mm)

TL (mm)

Cutting Capacity (mm)

AHG13

T111C

Softwood / Plastic

Straight Cut

MSS

100

AHGS14

T144D

All Wood Types

Straight Cut

SSS

100

AHC12

T101B

All Wood / Plastic

Straight Cut

GTG

AHC14

T101D

All Wood / Plastic

Straight Cut

GTG

AHC12R

T101BR

Wood / Laminate / Plastic

Down Cut

AHW12K

T119BO

Softwood / Insulation Mat.

AMG11

T118A

AMG12

T118B

Product Code

T.P.I

Qty

4.0 - 50.0

8.5

5.0 - 50.0

6.35

100

3.0 - 30.0

100

10.0 - 45.0

6.35

GTG

100

3.0 - 30.0

Curve Cut

MWS

1.5 - 15.0

Thin Sheet of Steel or SS

Straight Cut

MWS

1.2 - 3.0

Steel / SS / N-F / Alu.

Straight Cut

MWS

2.5 - 6.0

Set

WL - WORKING LENGTH

154

TL - TOTAL LENGTH

2 T.P.I - TEETH PER LENGTH

MULTI-TOOL BLADES

CUTTING

MULTI-TOOL BLADES A specialised range of multi-tool blades which are compatible with most leading multi-tool makes. The quick fit design means easy removal/fitting of the blade.

High performance M42 bi-metal blades with a protective hardened titanium coat to improve performance and increase working life.

Materials

TITANIUM COATED BI- METAL MT BLADES - LONGER LIFE

RADIAL WOOD/METAL BLADE

FINE CUT WOOD/METAL BLADE

Radial blades feature a flat side for working flush against a flat work surface. Perfect for cutting skirting or trims.

32mm and 44mm blades for general work. Fine cut blades are designed for a fine, clean cut into wood, plasterboard and many types of plastic.

Product Code

Size Ø (mm)

Cutting Depth (mm)

Teeth Pitch

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

MTR87TN

1.3

MT32TN MT44TN

32 44

54 54

1.4 1.4

Materials

BI-METAL MULTI-TOOL BLADES - MULTI-PURPOSE Made out of high performance M42 bi-metal blades for multi-purpose use.

RADIAL WOOD/METAL BLADE

FINE CUT WOOD/METAL BLADE

Radial blades feature a flat side for working flush against a flat work surface. Perfect for cutting skirting or trims.

32mm blade for general work. Fine cut blades are designed for a fine, clean cut into wood, plasterboard and many types of plastic.

Product Code

Size Ø (mm)

Cutting Depth (mm)

Teeth Pitch

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

MTR87BI

1.3

MT32BI

1.4

155

CUTTING

MULTI-TOOL BLADES CARBON STEEL MULTI-TOOL BLADES Materials

Blades manufactured from carbon steel, are typically used for timber cutting. Available in a range of widths and cutting depths to suit multiple jobs.

156

RADIAL WOOD BLADE

FINE CUT WOOD BLADE

Radial blades features a flat side for working flush against a flat work surface. Perfect for cutting skirting or trims.

10mm and 20mm blades ideal for detailed work. Fine cut blades are designed for a fine, clean cut into wood, plasterboard and many types of plastic.

Product Code

Size Ã&#x2DC; (mm)

Cutting Depth (mm)

Teeth Pitch

MTR87

1.4

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

MT10FT MT20FT

10 20

40 40

1.4 1.4

COARSE CUT WOOD BLADE

FINE CUT WOOD BLADE

32mm blade for general work. Coarse cut blades are designed to give a quick, coarse cut into wood, plasterboard and many types of plastic.

32mm blade for general work. Fine cut blades are designed for a fine, clean cut into wood, plasterboard and many types of plastic.

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

MT32CT

1.69

MT32FT

1.4

COARSE CUT WOOD BLADE

FINE CUT WOOD BLADE

69mm blade for cutting a large area material. Coarse cut blades are designed to give a quick, coarse cut into wood, plasterboard and many types of plastic.

69mm blade for cutting a large area material. Fine cut blades are designed for a fine, clean cut into wood, plasterboard and many types of plastic.

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

Product Code

Size (mm)

Cutting Depth (mm)

Teeth Pitch

MT69CT

1.69

MT69FT

1.4

MULTI-TOOL BLADES

CUTTING

SERRATED WAVY EDGE BLADE

FLEXIBLE SCRAPPER

The serrated blade is ideal for cutting soft materials such as cardboard, polystyrene, carpet, rubber and leather.

Ideal for many scraping applications such as removing paint, glues and silicone.

Materials

Product Code

Size (mm)

Cutting Depth (mm)

Product Code

Size (mm)

Depth (mm)

MT69SE

MT52SC

DIAMOND CARBIDE GRIT CARBON STEEL MULTI-TOOL BLADES

RADIAL BLADE

BOOT BLADE

Ideal for cutting tiles, porous concrete and plaster

Designed to remove grout from in-between tiles. The boot design rapidly removes the grout without damaging the tiles.

Materials

Product Code MTR65CG

Size Ã&#x2DC; (mm)

Product Code

Size (mm)

MTBOOT

SANDING PAD AND SHEETS

DELTA SANDING PAD

SANDING SHEETS

To be used in conjunction with the triangular sanding sheets.

Universal use on most surfaces, the hook and loop backing makes it easy to remove from the sanding pad.

For sanding wood, metal and plastics. Product Code

Size (mm)

MT93SP

Product Code

Size (mm)

Grit Range

Type

MTP60 MTP80 MTP100 MTP120 MTP180

93 93 93 93 93

60 80 100 120 180

Coarse Medium Medium Medium Fine

157

JAPANESE H I G H

PERFORMANCE

AUGER BITS LONG LIFE

3x Longer life compared to a standard auger bit Spurred cutting edge for a fast even cut

FAST CUT

CLEAN CUT

Burr-free lead screw for quick, on-target starts without material build up Unique twist design for clean, smooth chip removal Made in Japan

SEE PAGE 128

CIRCULAR SAW BLADES

CUTTING

TCT CIRCULAR SAW BLADES FOR WOOD Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials.

COARSE / MED. CUT GENERAL PURPOSE Softwood, Hardwood, Exotic Timber, Stone Fibre Board.

Product Code

MEDIUM CUT

MED. / FINE CUT

EXTRA FINE CUT

COMBINATION

TRIMMING/CROSSCUT

FINE TRIM/FINISHING

Softwood, Hardwood, Exotic Timber, Plywood, Cement Bonded Board, Soft Fibre Board.

Softwood, Hardwood, Exotic Timber, Veneers, Plywood, MDF, Particle Board with Plastic Lam.

Blade Ø (mm)

Blade Ø (inch equiv.)

Kerf (mm)

Bore (mm)

No. of Teeth

140 150 150 160 160 165 184 184 184 184 184 190 190 210 216 216 216 216 230 230 235 235 235 250 250 250 254 254 254 260 260 300 300 300 315 315 315

5 1/2 6 6 61/4 61/4 61/2 71/4 71/4 71/4 71/4 71/4 71/2 71/2 81/4 81/2 81/2 81/2 81/2 9 9 91/4 91/4 91/4 10 equiv. 10 equiv. 10 equiv. 10 10 10 101/4 101/4 117/8 117/8 117/8 123/8 123/8 123/8

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3

20 20 20 30 30 30 16 30 16 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

16 12 40 16 24 18 24 24 40 40 60 24 40 32 24 40 60 80 30 40 24 40 60 40 60 80 30 40 60 30 60 40 60 80 30 48 60

Cut Type

Softwood, Hardwood, Exotic Timber, Plywood, Cement Bonded Board, Soft Fibre Board. Bushing Ring Size (mm)

Singles C1402016 C1502012 C1502040 C1603016 C1603024 C1653018 C1841624 C1843024 C1841640 C1843040 C1843060 C1903024 C1903040 C2103032 C2163024 C2163040 C2163060 C2163080 C2303030 C2303040 C2353024 C2353040 C2353060 C2503040 C2503060 C2503080 C2543030 C2543040 C2543060 C2603030 C2603060 C3003040 C3003060 C3003080 C3153030 C3153048 C3153060

Coarse / Medium Coarse / Medium Medium / Fine Coarse / Medium Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Medium / Fine Extra Fine Coarse / Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Extra Fine Extra Fine Coarse / Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Medium Medium / Fine Extra Fine Coarse / Medium Medium Medium / Fine Coarse / Medium Medium / Fine Medium Medium / Fine Medium / Fine Coarse / Medium Medium Medium / Fine

16 16 16 or 20 16 or 20 16 or 20 25 16 or 20 16 or 20 16 or 20 16,20 or 25 16,20 or 25 16,20 or 25 -

159

CUTTING

CIRCULAR SAW BLADES

CORDLESS TRIM TCT CIRCULAR SAW BLADES Designed for use with hand-held cordless circular saws, this range includes blades for use on all types of timber and man-made boards. Product Code

Blade Ø (mm)

Blade Ø (inch equiv.)

Kerf (mm)

Bore (mm)

No. of Teeth

136 150 165 165 165 190

53/8 6 61/2 61/2 61/2 71/2

1.6 1.6 1.6 1.6 1.6 1.6

10 10 10 20 10 30

24 24 24 24 40 24

Cut Type

Singles T1361024 T1501024 T1651024 T1652024 T1651040 T1903024

Medium Medium Coarse / Medium Coarse / Medium Medium / Fine Coarse / Medium

ZERO DEGREE MITRE TCT CIRCULAR SAW BLADES For use with most mitre saws, these blades have precision ground teeth to give a clean and smooth cut in all types of timber and man-made boards. Product Code

Blade Ø (mm)

Blade Ø (inch equiv.)

Kerf (mm)

Bore (mm)

No. of Teeth

216 216 250 250

81/2 81/2 10 equiv. 10 equiv.

2.4 2.4 3 3

30 30 30 30

24 48 48 60

Cut Type

Singles Z2163024 Z2163048 Z2503048 Z2503060

Coarse / Medium Medium / Fine Medium Medium / Fine

TCT CIRCULAR SAW BLADES FOR ALUMINIUM FINE

Professional quality blades made with high quality tungsten carbide tips to provide an excellent lifespan and a flawless finish. Available with different tooth configurations to provide multiple cut types in a variety of materials. A range of blades for sizes 216, 250 and 305mm diameters.

(ALUMINIUM / PLASTIC Thin Walled Extrusions, Panels Of Aluminium, Plastic

-5 DEGREE BLADES Product Code

Blade Ø (mm)

Blade Ø (inch equiv.)

Kerf (mm)

Bore (mm)

No. of Teeth

216 216 250 305 305 305

81/2 81/2 10 equiv. 12 12 12

2.4 2.4 2.4 3 3 3

30 30 30 30 30 30

60 80 80 48 60 80

Cut Type

Singles A2163060 A2163080 A2503080 A3053048 A3053060 A3053080

160

Fine Fine Fine Fine Fine Fine

DRIVER BITS AND ADAPTORS 162 - V5 IMPACT BITS 163 - S2 DRIVER BITS 164 - DRIVER BIT SETS 166 - ADAPTORS

DRIVER BITS AND ADAPTORS

V5 IMPACT DRIVER BITS

V5 IMPACT DRIVER BIT SETS V5 steel has been specifically designed to withstand the extreme pressures of an impact driver. These durable hardened and patented bits will extend the lifespan and gives optimum performance in all impact applications.

MIXED V5 DRIVER BIT SET

V5 POZI DRIVER BIT SET Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver. Product Code

Size

Length (mm)

Type

Qty

PZ1 PZ2 PZ3

50 50 50

Pozi Pozi Pozi

1 3 2

Mixed selection of 25mm impact resistant driver bits and a magnetic adaptor, specifically designed for use with an impact driver.

Set - Qty 6 V5PZSET

Product Code

Size

Length (mm)

Type

Qty

Set - Qty 10

V5 TIM DRIVE DRIVER BIT SET

V5MEDSET

Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver.

PH2 25 Phillips PZ1 25 Pozi PZ2 25 Pozi PZ3 25 Pozi T15 25 TIM Drive T20 25 TIM Drive T25 25 TIM Drive T30 25 TIM Drive Quick Release Adapter

1 1 2 1 1 1 1 1 1

Product Code

Size

Length (mm)

Type

Qty

T15 T20 T25 T30

50 50 50 50

TIM Drive TIM Drive TIM Drive TIM Drive

1 2 2 1

Set - Qty 6 V5TXSET

Mixed selection of 50mm impact resistant driver bits, specifically designed for use with an impact driver. Size

Length (mm)

Type

Qty

PZ2 PH2 T25 T30

50 50 50 50

Pozi Phillips TIM Drive TIM Drive

2 2 1 1

Set - Qty 6 V5MIXSET

162

C2 RANGE INCLUDES

FREE

MIXED V5 DRIVER BIT SET

Product Code

OUR

DRIVER BITS

S2 DRIVER BITS

DRIVER BITS AND ADAPTORS

S2 DRIVER BITS S2 Steel is a premium quality alloy steel for exceptional strength and durability over the standard chrome vanadium driver bits.

PHILLIPS DRIVER BITS

Size

Length (mm)

Qty

PH 1 PH 2 PH 3 PH 2 PH 3

25 25 25 50 50

10 10 10 5 5

100 150 300

1 1 1

Product Code

Handy Packs 1PH25PACK 2PH25PACK 3PH25PACK 2PH50PACK 3PH50PACK

Product Code

Size

Length (mm)

Qty

PZ 1 PZ 2 PZ 3 PZ 4 PZ 1 PZ 2 PZ 3

25 25 25 38 50 50 50

10 10 10 10 5 5 5

PZ 2 PZ 2 PZ 2

100 150 300

1 1 1

Handy Packs

Mini Bit Packs 2PH100GB 2PH150GB 2PH300GB

POZI DRIVER BITS

PH 2 PH 2 PH 2

1CB25PACK 2CB25PACK 3CB25PACK 4CB38PACK 1CB50PACK 2CB50PACK 3CB50PACK

Mini Bit Packs 2CB100GB 2CB150GB 2CB300GB

TIM DRIVE DRIVER BITS HEX DRIVER BITS Product Code

Size

Length (mm)

Qty

T10 T15 T20 T25 T30 T40 T30

25 25 25 25 25 25 50

10 10 10 10 10 10 5

Handy Packs 10TX25PACK 15TX25PACK 20TX25PACK 25TX25PACK 30TX25PACK 40TX25PACK 30TX50PACK

Product Code

Size

Length (mm)

Qty

5.5 x 0.8 6.0 x 1.0 7.0 x 1.2 10.0 x 1.6

25 25 25 25

2 2 2 2

Twin Packs 5508SL25GB 6010SL25GB 7012SL25GB 1016SL25GB

Length (mm)

Qty

3.0 4.0 5.0 6.0 8.0

25 25 25 25 25

2 2 2 2 2

Twin Packs 3HX25GB 4HX25GB 5HX25GB 6HX25GB 8HX25GB

SQUARE DRIVER BITS

SLOTTED DRIVER BITS

Product Code

Size

Product Code

Size

Length (mm)

Qty

No.2 No.2

25 50

10 5

No.2

Handy Packs 2SQ25PACK 2SQ50PACK

Twin Packs 2SQ25GB

163

DRIVER BITS AND ADAPTORS

DRIVER BIT SETS

S2 BIT POUCH

S2 BIT CASE

A handy canvas pouch consisting of a mixed selection of the most popular 50mm driver bits with a quick release screw driver. Ideal for maintenance and repair.

Comprehensive 31 piece assorted case containing the most commonly used 25mm driver bits and a quick release adaptor. Convenient protective case with TPE (Rubber) corners and a handy belt clip.

24 PIECE SET

31 PIECE SET

Product Code

Size

Length (mm)

Type

Qty

Product Code

Size

Length (mm)

Type

Qty

POUCHSET

PH1

Phillips

PH2

Phillips

DBSETG31

PZ1

Pozi

PZ2

Pozi

PH3

Phillips

PZ3

Pozi

PZ1

Pozi

H4.0

Hex

PZ2

Pozi

H5.0

Hex

PZ3

Pozi

H6.0

Hex

T15

TIM Drive

H7.0

Hex

T20

TIM Drive

3.5

Slotted

T25

TIM Drive

4.5

Slotted

T30

TIM Drive

5.0

Slotted

Hex

5.5

Slotted

Hex

8.0

Slotted

Hex

T10

TIM Drive

1/4â&#x20AC;?

Quick Release

T15

TIM Drive

T20

TIM Drive

T25

TIM Drive

T30

TIM Drive

T40

TIM Drive

PH1

Phillips

PH2

Phillips

PH3

Phillips

2.0

Square

Quick Release Adapter

164

DRIVER BIT & DRILL BIT SETS

DRIVER BITS AND ADAPTORS

HSS DRILLS & DRIVER BITS

MIXED DRIVER BITS

A selection of quick release HSS Ground Metal Drills, S2 driver bits, Socket Drivers and a Magnetic adaptor. The quick release feature is designed to ensure a rapid change of bits making it ideal for multiple applications. Sold in a robust weatherproof case.

A 37 piece mixed selection of the most popular 25mm and 50mm S2 driver bits with a magnetic adaptor and an assortment of socket drivers. Sold in a robust weatherproof case.

20 PIECE SET

Product Code MIX20SET

37 PIECE SET

Size

Type

Qty

Product Code

Size

Length (mm)

Type

Qty

1.5 2.0 3.0 3.5 4.0 4.5 5.0 6.0 PH1 PH2 PH3 PZ1 PZ2 PZ3 5.0 6.0 6.0 8.0 10.0 -

HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit HSS Drill Bit Phillips Phillips Phillips Pozi Pozi Pozi Slotted Slotted Nut Driver Nut Driver Nut Driver Quick Changer

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BIT37SET

4.0

Slotted

4.5

Slotted

5.5

Slotted

6.0

Slotted

6.5

Slotted

7.0

Slotted

PH1

Phillips

PH2

Phillips

PH3

Phillips

PZ1

Pozi

PZ2

Pozi

PZ3

Pozi

T10

TIM Drive

T15

TIM Drive

T20

TIM Drive

T25

TIM Drive

T27

TIM Drive

T30

TIM Drive

T40

TIM Drive

3.0

Hex

4.0

Hex

5.0

Hex

5.5

Hex

6.0

Hex

PH1

Phillips

PH2

Phillips

PH3

Phillips

PZ1

Pozi

PZ2

Pozi

PZ3

Pozi

5.5

Slotted

7.0

Slotted

Nut Driver

OTHER DRILLING SETS

AVAILBALE

SEE PAGE

134

Magnetic Bit Holder

165

DRIVER BITS AND ADAPTORS

SOCKET DRIVERS AND ADAPTORS

SOCKET DRIVERS AND ADAPTORS SOCKET DRIVERS

Product Code

Length (mm)

Type

Pack Qty

5/16” 1/4” 6mm 10mm 11mm 13mm

65 65 65 65 65 65

Hex Hex Hex Hex Bi-Hex Hex

1 1 1 1 1 1

5/16” 10mm

65 65

Hex Hex

20 20

Size

Mini Bit Packs Also known as a 1/4” Nut Setter. Used for installing hexagon headed fasteners with a power tool.

516SDB 635SDB 6SDB 10SDB 11BHSDB 13SDB

Bit Packs 516SDJ 10SDJ

ONE PIECE ADAPTORS

TWO PIECE ADAPTORS

A magnetic 1/4” hex drive adaptor machined from a single piece of stainless steel to give extended life and durability. Available with or without a circlip to improve bit retention. Product Code

Length (mm)

Type

Qty

Circlip

1 1

Mini Bit Packs 60MASSB 60MASSCB

60 60

Quick Release An economic magnetic 1/4” hex drive adaptor manufactured from two pieces of carbon steel.

REGULAR Product Code

Length (mm)

Qty

60 60 150 300

Circlip Circlip Circlip

1 1 1 1

60 60

Circlip

20 20

Type

Pack Qty

60 150 300

Circlip Circlip Circlip

1 1 1

Circlip

Mini Bit Packs 60MAB 60MACB 150MACB 300MACB

SDS ADAPTORS

Type

Bit Packs 60MAJ 60MACJ

A magnetic SDS Plus to 1/4” hex drive adaptor, ideal for converting your SDS-Plus drill in to a screwdriver when in rotary mode only.

QUICK RELEASE Product Code

Length (mm)

Mini Bit Packs Product Code

Length (mm)

Type

Qty

1/4

Mini Bit Packs 80MASDSCB

166

60MAQRB 150MAQRB 300MAQRB

Bit Packs 60MAQRJ

HAND HAND TOOLS TOOLS AND & ACCESSORIES ACCESSORIES 168 - HACKSAW FRAMES 168 - HACKSAW BLADES 169 - KNIFE BLADES 169 - TAPE MEASURE 170 - SCRATCH WIRE BRUSHES 170 - WIRE BRUSHES

HAND TOOLS AND ACCESSORIES

HACKSAW FRAMES / BLADES

Stephen@slblarkhall.co.uk

HACKSAW FRAMES

HACKSAW BLADES

LARGE HACKSAW

BI-METAL BLADES A professional quality high tension hacksaw frame, with an ergonomic and comfortable TPR grip handle. frame includes four additional bi-metal blades with different teeth configuration.

LIGHTWEIGHT HACKSAW

Toughened steel frame with an ergonomic rubber handle, includes one 24 TPI blade.

Choose fine pitch (32T) for thinner materials, a coarser pitch (18T) for thicker steel. The teeth should point towards the front of the saw and cut on the push stroke. Ideally, at least three teeth should be in the material.

Product Code

Overall Length Teeth (mm) Per Inch

Qty

Pack HSB18P5 HSB24P5 HSB32P5

MINI HACKSAW

Die-cast aluminium frame with a soft grip rubber handle. Ideal for difficult to reach areas. Will accept 250-300mm hacksaw blades.

JUNIOR HACKSAW

300 300 300

18 24 32

5 5 5

JUNIOR HACKSAW BLADES General purpose 150mm junior hacksaw blades with 24 teeth per inch and pinned ends for secure fitting. Ideal for plastic and metal pipe cutting. Fits all standard junior hacksaw frames.

Die-cast aluminium frame with a soft grip rubber handle, includes one 24 TPI SK4 blade.

168

Product Code

Frame

Blade Size (Imp.)

HD12HSF 12HSF 12MHSF 6JHSF

Large Lightweight Mini Junior

12” 12” 12” 6”

Product Code

Overall Length Teeth (mm) Per Inch

Qty

Pack SK4JB

150

KNIFE BLADES / TAPE MEASURE

SK2 STEEL KNIFE BLADES HOOKED KNIFE BLADES Sharpe point for penetrating and cutting sheet material in particular floor coverings and plastic sheeting. Manufactured using SK2 steel to give a longer life and a sharper cut. Product Code

TAPE MEASURE A five meter super strength matt nylon coated steel blade with metric & inch measurements ideal for the professional user. Ergonomic shock resistant easy grip rubber jacket for comfortable non-slip grip.

Blade Size

Qty

51 x 19 x 0.6

Pack HBDISP

HAND TOOLS AND ACCESSORIES

Product Code

Size (m x mm)

Singles TM5M

5 x 19

UTILITY KNIFE BLADES Compatible with all standard utility knives. Manufactured using SK2 steel to give a longer life and a sharper cut. For general purpose cutting of linoleum, plastic, wood, carpet, cardboard etc. Product Code

Blade Size

Qty

60 x 90 x 0.6 60 x 90 x 0.6 60 x 90 x 0.6

10 50 100

Pack UBDISP UBHANG UBCASE

JIGSAW AND SABRE BLADES

SNAP OFF BLADES

Snap off blades for standard retractable knives. Multiple cutting edges for longer life. Manufactured using SK2 steel to give a longer life and a sharper cut. Product Code

Blade Size

Qty

9 18

10 10

Pack UBSNAP9 UBSNAP18

SEE PAGES 150 - 152 169

HAND TOOLS AND ACCESSORIES

SCRATCH BRUSHES

SCRATCH AND WIRE BRUSHES

WIRE BRUSHES

WOODEN HANDLE

Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt. Stainless steel reduces contamination of the base material. Product Code

Width (mm)

3SBHD 4SBHD

28 33

3SBSS 4SBSS

28 33

Length (mm)

No. of Rows

STEEL 295 295

3 x 18 4 x 18

STAINLESS STEEL 295 295

3 x 16 4 x 16

A high density wire brush with an ergonomic plastic handle. Ideal for a more aggressive removal of paint, rust, scale, grout or dirt. Sold in three brush types to suit a variety of applications.

WOODEN HANDLE & SCRAPPER

Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt. Scrapper attached to help remove larger areas of dirt etc. Product Code

Width (mm)

Length (mm)

No. of Rows

STEEL 4SSBHD

295

Size (mm)

STEEL RWHB

255

STAINLESS STEEL BWHB

255

BRASS 4 x 18

YWHB

255

PLASTIC HANDLE

FILE CLEANING BRUSH

A moisture and chemical resistant ergonomic handle. Ideal for the professional user when preparing surfaces to remove paint, rust, scale, grout or dirt.

For cleaning embedded filings from both wood and metal files.

Product Code

No. of Rows

Product Code

FCB

Width (mm)

Length (mm)

No. of Rows

STEEL

170

Product Code

4SBP

280

4 x 15

6SBP

280

6 x 15

110 x 40

TAPES AND SITE PROTECTION 172 - HEAVY DUTY CLOTH TAPE 172 - CLOTH TAPE 172 - PVC BUILDERS TAPE 172 - DOUBLE SIDED CLOTH TAPE 172 - MASKING TAPE 173 - PACKING TAPE 173 - ALUMINIUM FOIL TAPE 173 - PVC TAPE 173 - ANTI-SLIP TAPE 173 - HAZARD TAPE 173 - BARRIER TAPE 174 - SHIELD PROTECTIVE FILM 174 - SHIELD DUST SHEETS 175 - SHIELD LAMINATE SHEETS 175 - SHIELD BUILDERS WIPES

TAPES AND SITE PROTECTION

TAPES

HEAVY DUTY CLOTH TAPE

PACKAGING TAPE

A super-strength tape. Water resistant and extremely durable, this industrial quality tape is designed to be used in multiple indoor and outdoor applications.

A quality tape giving you an instant and secure fixture, ideal for sealing boxes, attaching labels and general packing applications.

Product Code

Length (m)

Width (mm)

Colour

Qty

50 50 50

Black Silver White

1 1 1

Pack HDCTBLACK HDCTSILVER HDCTWHITE

Length (m)

Width (mm)

Colour

Qty

50 50

48 48

Clear Brown

3 3

Pack PTC PTB

CLOTH TAPE

3 DAY MASKING TAPE

A medium quality cloth tape used to repair, fasten, bundle, strengthen, mark, plus much more.

A general purpose masking tape. Designed to be easily removed for up to three days without leaving residue or damaging the surface.

Product Code

Length (m)

Width (mm)

Colour

Qty

50 50 50

48 48 48

Black Silver White

1 1 1

Pack CTBLACK CTSILVER CTWHITE

Product Code

Length (m)

Width (mm)

Colour

Qty

50 50 50

25 38 50

Cream Cream Cream

1 1 1

Pack MT25 MT38 MT50

DOUBLE SIDED CLOTH TAPE

HIGH STRENGTH PVC BUILDERS TAPE

A strong double sided cloth tape designed to stick two surfaces together where an invisible joint is required. Ideal for fixing carpets, signs and protective sheeting to multiple surfaces.

A strong versatile PVC tape used for jointing PVC and polythene sheets and membranes. Frequently used for sealing contamination barriers, polythene dust sheets, silage covers and bales.

Product Code

Length (m)

Width (mm)

Colour

Qty

White

Pack DSCT

172

Product Code

Length (m)

Width (mm)

Colour

Qty

Black

Pack HSBT

TAPES

TAPES AND SITE PROTECTION

PVC INSULATION TAPE

BARRIER TAPE

Ideal for insulating electrical wires and joints. Easily torn by hand, can be written on and cleanly removed from smooth surfaces.

A durable nonadhesive polythene barrier tape, ideal for marking out hazardous areas. Can be used internally and externally.

Product Code

Length Width (m) (mm)

Colour

Qty

Black White Grey Red Blue Green Yellow Brown Green/Yellow

10 10 10 10 10 10 10 10 10

Available in 100 & 500 metre rolls. 500m rolls come in a convenient dispensing box for easy storage and application

Pack ITBLACK ITWHITE ITGREY ITRED ITBLUE ITGREEN ITYELLOW ITBROWN ITGYSTRIPE

25 25 25 25 25 25 25 25 25

18 18 18 18 18 18 18 18 18

HAZARD TAPE

Length Width (m) (mm)

Colour

Qty

Black/Yellow

Pack HAZT

ANTI-SLIP TAPE High grade P60 grit offers excellent grip, used to reduce risk of slipping on hazards such as stairs, shop fronts, ramps and paths etc. Product Code

Length Width (m) (mm)

Colour

Qty

Pack BART BARTYB

100 100

70 70

Red/White Yellow/Black

1 1

500 500

70 70

Red/White Yellow/Black

1 1

Box BART500 BARTYB500

ALUMINIUM FOIL TAPE

A durable self adhesive PVC tape, ideal for marking floors, walls and hazardous areas. Can be used internally and externally. Product Code

Product Code

Used in jobs requiring moisture and chemical resistance, thermal conductivity, flame resistance, heat and light reflectance and is weather resistant. Perfect for joining foil covered insulation, sealing off pipes and ducts.

Product Code

Length Width (m) (mm)

Colour

Qty

Silver Silver Silver

1 1 1

Pack AFT50 AFT75 AFT100 Colour

Qty

Black/Yellow Black

1 1

45 45 45

50 75 100

Pack ASTSTRIPE ASTBLACK

10 10

50 50

173

TAPES AND SITE PROTECTION

SHIELD RANGE

SHIELD PROTECTIVE FILM

SHIELD DUST SHEETS

CARPET / HARD SURFACE / GLASS

PROFESSIONAL / LAMINATE / STAIR

PROFESSIONAL SHEET High quality dust sheet for multiple uses including floor and furniture covering during decoration.

LAMINATE SHEET Shield protective film is a highly effective selfadhesive product, giving protection from foot traffic, debris, spills etc. Easy to apply, the film can be left for up to 30 days before simple removal.

Please ensure you have read and fully understood the usage guidelines before installation.

Product Code

Thickness (mm)

Width (mm)

High quality dust sheet with a lamination to greatly reduce risk of paint and liquid soaking through.

STAIR RUNNER SHEET High quality and cut to a convenient width to suit standard staircases avoiding need to fold which reduces risk of trips and falls.

Length (m)

Product Code

Weight (kg)

CARPET

Width (ft)

PROFESSIONAL SHEET

25CP

0.05

600

CDS129

1.70

50CP

0.05

600

CDS1212

2.00

100CP

0.05

600

100 CDSL129

1.59

HARD SURFACE 25HP

0.05

50HP

0.05

600

GLASS

174

Length (ft)

25WP

0.05

600

50WP

0.05

600

LAMINATE SHEET 12

STAIR RUNNER SHEET CDSS243

1.12

SHIELD RANGE

SHIELD TARPAULIN LIGHT DUTY / HEAVY DUTY

TAPES AND SITE PROTECTION

SHIELD EXTRA TOUGH BUILDERS WIPES Multi use wipes formulated to clean and remove wet and semi-cured paint, grease, glues, sealant, adhesive, bitumen, tar, expanding foam, oil, silicone and permanent marker. Contains aloe vera and anti-bacterial additive. Product Code

Tub Qty

TUB

LIGHT DUTY TARPAULIN - 80gsm A light weight everyday tarpaulin with an 8 x 8 weave. Great for convenient covering of outdoor equipment and materials to protect from the elements.

HEAVY DUTY TARPAULIN - 180gsm A tarpaulin for tougher jobs. Manufactured with a heavier gauge 14 x 14 weave for increased durability. Reinforced corners for double strength tie down points.

SCRUB

100

SHIELD TEXTURED HEAVY DUTY WIPES A heavy duty textured wipe designed to remove the most stubborn substances, such as paint, grease, glue, sealant, adhesives, bitumen, tar, expanding foam and many other wet and semi-cured substance. Product Code

Tub Qty

TUB HDSCRUB Product Code

Size (m)

Mesh / Weave Count

TTL23

2x3

8x8

TTL45

4x5

8x8

TTL58

5x8

8x8

Weight (gsm)

LIGHT DUTY TARP

SHIELD STOCKINETTE ROLL

HEAVY DUTY TARP TTH23

2x3

14 x 14

180+

TTH45

4x5

14 x 14

180+

TTH58

5x8

14 x 14

180+

Ideal for cleaning and polishing. Frequently used to clean up grease and oil. It is a continuous roll and can be cut to a more convenient desired length. Product Code

Weight (g)

Length (m)

SSR400

400

4.8 (approx)

175

PREMIUM QUALITY

ROPES, STRAPS, BUNGEE CORDS, PADLOCKS & CHAINS

SEE FULL RANGE ON PAGE 181-189

DOOR ACCESSORIES 178 - TUBULAR LATCHES 178 - ADJUSTABLE ROLLER CATCHES 178 - BALES CATCHES 178 - DOUBLE ROLLER CATCHES 179 - MAGNETIC CATCHES 179 - DOUBLE BALL CATCHES 179 - MODESTY BLOCKS 179 - KNOCK DOWN BLOCKS 180 - PVC DOOR STOPS 180 - PVC DOOR WEDGES 180 - SPRING DOOR STOPS

DOOR ACCESSORIES

LATCHES / CATCHES

TUBULAR LATCHES Available in:

BRASS

NICKEL

Designed for use on internal doors with a lever handle. Supplied with matching strike plate in electro brass or nickel plated finishes. Product Code

Size HxWxD (mm)

Hole 0 in Strike Plate (mm)

Hole 0 in Catch (mm)

Finish/ Plating

Qty

5.5 5.5

6.0 6.0

Electro Brass Nickel

1 1

Packs TLBRASS63P 60 x 25 x 67 TLNICKEL63P 60 x 25 x 67

ADJUSTABLE ROLLER CATCHES Available in:

BRASS

NICKEL

Used for securing internal doors that require just a push/pull handle. Adjustable roller to adjust the closing tension of the door. Supplied with matching strike plate in electro brass or nickel plated finishes. Product Code

Size HxWxD (mm)

Hole 0 in Strike Plate (mm)

Hole 0 in Catch (mm)

Finish/ Plating

Qty

4.4 4.4

5.9 5.9

Electro Brass Nickel

1 1

Packs ARCBRASSP 59 x 23.5 x 39 ARCNICKELP 59 x 23.5 x 39

BALES CATCHES Available in:

BRASS

Used for securing internal doors that require just a push/pull handle. Supplied with matching strike plate in electro brass.

Product Code

Size HxWxD (mm)

Hole 0 in Strike Plate (mm)

Hole 0 in Catch (mm)

Finish

Qty

57 x 23 x 20

3.7

4.2

Electro Brass

Packs BC19P

DOUBLE ROLLER CATCHES Available in:

ZINC

A surface mounted push fit catch for securing cupboard or cabinet doors.

Product Code

Size (mm)

Hole ï&#x2DC;¹ (mm)

Finish

Qty

28 x 32

4.5

Zinc

Packs DRP

178

CATCHES / BLOCKS

MAGNETIC CATCHES Available in:

DOUBLE BALL CATCHES

WHITE

Available in:

A surface mounted light duty catch for securing cupboard or cabinet doors.

Product Code

Size LxWxH

Strength (kg)

Colour

Qty

40 x 22 x 12 58 x 22 x 16

4.0 6.0

White White

2 2

NICKEL

Product Code

Size (mm)

Finish

Qty

43 x 8.0 50 x 8.5 43 x 8.0 50 x 8.5

Electro Brass Electro Brass Chrome Satin Chrome Satin

2 2 2 2

Packs

MODESTY BLOCKS Available in:

WHITE

DBC40BRASSP DBC50BRASSP DBC40CHROMEP DBC50CHROMEP

KNOCK DOWN BLOCKS

BROWN

Available in:

WHITE

BROWN

Used for the assembly of boards at 90 degrees. Secured with a bolt into the thread of the second block which draws the two fittings together.

Used for the assembly of boards at 90 degrees.

Product Code

BRASS

A solid brass push fit catch for securing cupboard or cabinet doors.

Packs MC4P MC6P

DOOR ACCESSORIES

Size LxWxH

Hole 0 (mm)

Colour

Qty

4.8 4.8

White Brown

2 2

Packs MBWHITEP 34 x 13 x 13 MBBROWNP 34 x 13 x 13

Product Code

Size LxWxH

Hole 0 (mm)

Colour

Qty

4.9 4.9

White Brown

2 2

Packs KDWHITEP 35 x 25 x 12 KDBROWNP 35 x 25 x 12

Available in Yellow, Zinc, Black & Stainless Steel See pages 12-14 Mixed Trays on page 20 179

DOOR ACCESSORIES

DOOR STOPS / WEDGES

PVC DOOR STOPS Available in:

WHITE

SPRING DOOR STOPS

BLACK

Available in:

A floor mounted door stop used to prevent doors from damaging walls.

Product Code

Size LxWxH

Hole 0 (mm)

Colour

Qty

21 x 32 21 x 32

6.0 6.0

Black White

2 2

GREY

A triangular shaped wedge used to temporarily stop doors from closing.

Product Code

Size LxWxH

Hole 0 (mm)

Colour

Qty

136 x 43 x 29

4.4

Grey

Packs DWEDGE

180

Product Code

Size LxWxH

Hole 0 (mm)

Colour

Qty

78 x 24 78 x 24

4.0 4.0

Black Nickel

2 2

Packs

PVC DOOR WEDGES Available in:

NICKEL

A wall or skirting board mounted door stop used to prevent doors from damaging walls.

Packs DSBLACKP DSWHITEP

BRASS

SSBRASSP SSNICKELP

SECURITY SOLUTIONS 182 - BRASS PADLOCKS 182 - WEATHERPROOF PADLOCKS 183 - LAMINATED PADLOCKS 183 - STAINLESS STEEL PADLOCK 183 - DISC PADLOCKS 184 - RECTANGULAR PADLOCKS 184 - COMBINATION PADLOCKS 185 - SAFES & CASES 185 - CABLE LOCK 185 - CABLES & CHAINS 186 - RATCHET STRAPS 186 - TIE DOWNS 187 - BUNGEE CORDS 188 - ROPES

SECURITY SOLUTIONS

PADLOCKS

BRASS PADLOCK STANDARD SHACKLE

BRASS PADLOCKS KEY ALIKE

A durable medium security padlock used for a variety of applications.

Set of 4 identical brass padlocks, that has the same key code so all four keys enclosed will fit each lock within the pack.

3-7

SECURITY RATING WEATHER RATING

IDEAL FOR:

LUGGAGE CABINETS

SHEDS

GATES

LUGGAGE CABINETS

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs

Product Code

SHEDS

GATES

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs

P30 P40 P40X2 P50 P60

30 40 40 50 60

5.2 6.3 6.3 8.1 9.5

3 5 5 6 7

3 3 3 3 3

1 1 2 1 1

P40KA

6.3

BRASS PADLOCK LONG SHACKLE

WEATHERPROOF PADLOCK

A standard brass padlock with a long shackle, for use when standard legnth types are restricted.

A laminated padlock with a durable vinyl cover to enhance corrosion resistance and improve weatherproofing.

4-5

SECURITY RATING WEATHER RATING

SHEDS

GATES

SECURITY RATING

SHEDS

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Product Code

GATES

CHAINS

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs

Packs P40L P50L

IDEAL FOR:

LUGGAGE CABINETS

Product Code

WEATHER RATING

IDEAL FOR:

182

SECURITY RATING WEATHER RATING

IDEAL FOR:

Product Code

4 PACK

40 50

6.3 8.1

4 5

3 3

1 1

WP40

PADLOCKS

SECURITY SOLUTIONS

LAMINATED PADLOCK STANDARD SHACKLE

STAINLESS STEEL PADLOCK

An economic padlock, ideal for lower security applications.

Designed with a shrouded shackle ensuring maximum resistance against cutting and prying. Ideal for extreme weather.

5-6

SECURITY RATING WEATHER RATING

WEATHER RATING

IDEAL FOR:

SHEDS

Product Code

IDEAL FOR:

GATES

CHAINS

GARAGES SHUTTERS

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs LSP40 LSP50

SECURITY RATING

Product Code

CHAINS

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs 40 50

6.1 8.8

5 6

3 3

1 1

SS50SS

LAMINATED PADLOCK LONG SHACKLE

DISC PADLOCKS

An economic padlock, ideal for lower security applications.

Used for securing chain and catches where there is a risk of cropping attacks.

4-5

SECURITY RATING WEATHER RATING

Product Code

SECURITY RATING

IDEAL FOR:

GATES

GARAGES SHUTTERS

CHAINS

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs LSP40L LSP50L

WEATHER RATING

IDEAL FOR:

SHEDS

Product Code

SHEDS

GATES

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs 40 50

6.1 8.8

4 5

3 3

1 1

DP70

183

SECURITY SOLUTIONS

PADLOCKS

BRASS RECTANGULAR PADLOCK

ARMOURED RECTANGULAR PADLOCK

A high security padlock used where there is a risk of cropping, hacksaw or hammer attacks.

A durable and high security padlock used where there is a risk of cropping, hacksaw or hammer attacks.

SECURITY RATING WEATHER RATING

WEATHER RATING

IDEAL FOR:

GARAGES SHUTTERS

Product Code

CHAINS

GARAGES SHUTTERS

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs RP75

SECURITY RATING

Product Code

CHAINS

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs 75

11.7

ARP90

COMBINATION PADLOCK A key-less solution commonly used on luggage, tool boxes and storage lockers.

1-3

SECURITY RATING WEATHER RATING Product Code

IDEAL FOR:

LUGGAGE TOOLBOX LOCKERS

184

Size Shackle Security Dials Qty (mm) Gauge (mm) Rating

Packs CP21 CP28 CP38

21 28 38

3.1 5 6

1 2 3

3 4 4

1 1 1

CABLE / CHAIN / KEY SAFES

SECURITY SOLUTIONS

LOOPED CABLE

CABLE LOCK

A weather resistant, braided steel security cable for increased strength and flexibility.

Protective vinyl coating to enhance corrosion resistance and scratch prevention. Four dial combination gives locking options.

6-7

SECURITY RATING WEATHER RATING

WEATHER RATING

IDEAL FOR:

GATES

Product Code

IDEAL FOR:

MACHINES LADDERS BICYCLES

Size (mm)

Shackle Gauge (mm)

Security Rating

Qty

1800 3000

10 15

6 7

1 1

Packs LC1800 LC3000

Product Code

Size Shackle Security Dials Qty (mm) Gauge (mm) Rating

Packs

SECURITY CHAIN

CL1000

1000

Product Code

Size (mm)

Shackle Gauge (mm)

Security Rating

Qty

1000 1500 2000

8 8 8

1 1 1

Packs SC1000 SC1500 SC200

WEATHER RATING

KEY CABINET

KEY SAFE

Provides safe and easy storage of multiple keys. Steel body with 20 hooks and a changeable 3 digit combination dial.

Convenient and secure storage of keys. Solid and reinforced aluminium door with concealed combination dial for improved weather resistance and security.

. Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs 20KEYCAB

MACHINES LADDERS BICYCLES

SECURITY RATING

Product Code

IDEAL FOR:

A hardened steel security chain with anti-crop square links, covered with an anti-scratch nylon protective sleeve.

SECURITY RATING

Product Code

Size Shackle Security Keys Qty (mm) Gauge (mm) Rating

Packs 8

KEYSAFE

185

SECURITY SOLUTIONS

RATCHET STRAPS

STANDARD DUTY RATCHET STRAPS

COMMERCIAL DUTY RATCHET STRAPS

Ideal for quickly securing light loads during transit or storage.

Wider straps for securing medium loads during transit or storage.

S HOOK

J HOOK

5m length with a standard S hook and 250kg working load.

6m length with a heavier duty J hook and 1000kg working load.

Working Break Pack Product W x L (mm x m) Load (kg) Strength (kg) Qty Code

Packs 5RS2S 5RS4S

Packs 25 x 5 25 x 5

250 250

500 500

2 4

6RS2J

35 x 6

1000

2000

HEAVY DUTY RATCHET STRAPS

J HOOK

Heavy gauge straps for securing heavier loads during transit or storage

5m length with a heavier duty J hook and 350kg working load. Working Break Pack Product W x L (mm x m) Load (kg) Strength (kg) Qty Code

Packs 5RS2J

25 x 5

350

700

CAM BUCKLE TIE DOWN

J HOOK

Ideal for attaching ladders to a vehicle, pallets & bicycles.

10m length with a heavier duty J hook and 2500kg working load.

Working Break Pack Product W x L (mm x m) Load (kg) Strength (kg) Qty Code

Packs 5CBTD2

186

Packs 36 x 5

123

245

10RS2J

50 x 10

2500

5000

BUNGEE CORDS

SECURITY SOLUTIONS

STANDARD DUTY BUNGEE CORDS Ideal for quickly securing and fixing a variety of light loads during transit or storage.

S ITE

P R OTEC TION

TARPAULIN

2 PACK

8 PACK

Ø (mm

Length (mm)

60BUN 100BUN

8.0 8.0

60 100

Product Code

Ø (mm

Length (mm)

BUNMIX8

4.5 8.0 8.0

25 60 80

Product Code

Ø (mm

Length (mm)

4.5 8.0 8.0 8.0 8.0

25 45 50 60 75

Product Code

20 PACK

Working Qty Load (kg)

2 Pack 30 30

2 2

Working Qty Load (kg)

8 Pack N/A 30 30

4 2 2

Working Qty Load (kg)

LIGHT DUTY HEAVY DUTY

20 Pack

BUNMIX20

N/A 30 30 30 30

4 4 4 4 4

SEE PAGE 175 187

SECURITY SOLUTIONS

ROPES / BRICK LINE

VETO BLUE POLYPROPYLENE ROPES

VETO BRAIDED NYLON BRICK LINE

A general purpose rope suitable for towing, mooring, barrier rope, lorry tie, agricultural and industrial uses.

Ideal for staking sites prior to concreting, landscaping or bricklaying.

WINDER ROPES

PINK BRICK LINE

Ideal for all general purpose building use.

Ideal as guidelines for building & landscaping.

Product Code

WxL (mm x m)

Working Load (kg)

Break Strength (kg)

3 x 30 6 x 20 8 x 15 10 x 10

12 60 100 160

70 350 600 980

Packs BR330W BR620W BR815W BR1010W

Product Code

Working Break Load (kg) Strength (kg)

Winder PBL100W

1.5 x 100

Tube

COIL ROPES

PBL100T

Ideal for all general purpose building use. Product Code

WxL (mm x m)

YELLOW BRICK LINE

WxL (mm x m)

Working Load (kg)

Break Strength (kg)

6 x 30 8 x 30 10 x 30 12 x 30

60 100 160 220

350 600 980 1570

Ideal as guidelines for building & landscaping.

Packs BR630C BR830C BR1030C BR1230C

Product Code

LONG COIL ROPES

Working Break Load (kg) Strength (kg)

Packs BR6220C BR8220C BR10220C BR12220C

188

6 x 220 8 x 220 10 x 220 12 x 220

1.5 x 100

Tube YBL100T

WxL (mm x m)

Working Break Load (kg) Strength (kg)

Winder YBL100W

Ideal for all general purpose building use. Product Code

WxL (mm x m)

60 100 160 220

350 600 980 1570

NOTES

189

INDEX

A ADAPTORS........................................... ALUMINIUM FOIL TAPE.................... ALUMINIUM LOOSE NAILS............. ANGLE BRACKET................................ ANGLED BRACE.................................. ANTI-SLIP TAPE.................................. ARRIS RAIL BRACKET........................ AUGER BIT............................................

166 173 104 111 117 173 115 127

B BARRIER TAPE..................................... 173 BLACKJAX.............................................. 19 BLACKSMITHS DRILL........................ 133 BONDED ABRASIVE DISC................ 149 BRAD NAILS........................................... 89 BRAD POINT WOOD BIT.................. 126 BRASS PADLOCK................................ 182 BRICK LINE........................................... 188 BRICK REINFORCEMENT COIL........ 114 BRIGHT LOOSE NAILS..... 91, 92, 93, 94 BROACHING CUTTER........................ 135 BUILDERS TAPE.................................. 172 BUILDERS WIPES................................ 175 BUNGEE CORDS................................. 187

C C2 ADVANCED SCREWS....................... 9 CABLE.................................................... 185 CABLE LOCK........................................ 185 CABLE TIES............................................. 58 CABLE TRAY BOLT................................ 48 CARCASS SCREWS............................... 20 CARRIAGE BOLT................................... 46 CARRIAGE BOLTS................................. 25 CATCHES.............................................. 178 CEILING ANCHOR................................ 73 CHAIN.................................................... 185 CHEMICAL ANCHOR STUD............... 83 CHUCKS................................................ 140 CIRCULAR SAW BLADES......... 159, 160 CLASSIC MULTI-PURPOSE SCREWS. 12 CLIPPED HEAD NAILS......................... 88 CLOTH TAPE......................................... 172 COACH SCREWS............................ 25, 26 COBALT JOBBER DRILL..................... 129 COLLATED SCREWS............................. 66 COMBINATION PADLOCK................ 184 COMPOSITE PANEL SCREWS............ 30 CONE CUTTER..................................... 136 CONNECTOR NUT................................ 54 COPPER LOOSE NAILS...................... 103

190

CORNER BRACE.................................. 117 CORNER PLATE................................... 117 CORRUGATED SHEET FIXINGS......... 33 COUNTERSINK.................................... 136 CRAMP.................................................. 112 CUP BRUSH.......................................... 137 CUP HOOKS........................................... 59

G GALVANISED LOOSE NAILS. 95, 96, 97, 98, 99 GLASS AND TILE DRILL BITS........... 125 GROUND JOBBER DRILL.................. 130 GUNS....................................................... 85

DE-BURRING COUNTERSINK.......... 136 DECKING SCREWS............................... 22 DIAMOND BLADES......... 147, 148, 149 DIAMOND CORE BIT......................... 145 DIAMOND DRILL BIT......................... 125 DISC PADLOCKS................................. 183 DOOR STOPS....................................... 180 DOOR WEDGES.................................. 180 DOUBLE SIDED CLOTH TAPE......................................... 172 DOWTY TYPE WASHER....................... 33 DRILL SETS........................................... 134 DRIVER BITS................................ 162, 163 DRIVER BIT SETS................................ 164 DROP IN ANCHOR............................... 80 DRYWALL BRACKET.......................... 115 DRYWALL SCREWS.............................. 64 DUST SHEETS...................................... 174

HACKSAW BLADES............................ 168 HACKSAW FRAMES........................... 168 HAMMER BIT....................................... 121 HAMMER FIXING.................................. 75 HAMMER-IN FIXING............................ 70 HANGERS............................................. 107 HAZARD TAPE..................................... 173 HEAVY DUTY CLOTH TAPE.............. 172 HELICAL BAR....................................... 114 HEX DOME NUT.................................... 53 HEX FULL NUT...................................... 52 HEX HEAD COVER CAPS.................... 32 HIGH TENSILE BAR.............................. 83 HINGE CUTTER................................... 126 HIP IRON............................................... 116 HOLESAW KITS................................... 144 HOLESAWS................................. 142, 143 HOOKS.................................................... 59

EPDM WASHERS................................... 32 EXPRESS NAIL....................................... 72 EYES......................................................... 59

F FENCE KIT............................................. 115 FENCING CLIP..................................... 115 FILE CLEANING BRUSH.................... 170 FIRMAHOLD.......................................... 88 FISHTAIL CRAMP................................ 112 FIXING BAND...................................... 112 FLAT WOOD BIT.................................. 126 FORGED EYE.......................................... 82 FORGED HOOK..................................... 82 FORM A WASHER................................. 54 FORM B WASHER................................. 55 FORM C WASHER................................. 55 FRAME ANCHOR.................................. 75 FRAME FIXING...................................... 75 FUEL CELLS............................................ 90

INSULATION DISC................................ 74 INSULATION FIXING............................ 74 INSULATION RETAINING CLIP........ 113 INTERLOCKING WEDGE................... 118

J JIGSAW BLADES................................. 152 JOBBER DRILL..................................... 129 JOIST STRUT........................................ 116

K KEY CABINET....................................... KEY SAFE.............................................. KNIFE BLADES.................................... KNOCK DOWN BLOCKS....................

185 185 169 179

INDEX

L LAMINATED PADLOCK..................... 183 LATCHES............................................... 178 LOOPED CABLE.................................. 185

M MACHINE SCREWS.............................. 37 MASKING TAPE................................... 172 MASONRY DRILL BIT......................... 124 MASONRY HANGERS........................ 106 MASONRY NAILS............................... 104 MENDING PLATE................................ 117 METAL CAVITY ANCHOR................... 69 METAL FRAMING SCREWS................ 34 MIRROR PLATE.................................... 117 MIRROR SCREWS................................. 20 MODESTY BLOCKS............................ 179 MULTI-FIX BOLT................................... 78 MULTI-FIX CONCRETE SCREW......... 76 MULTI-FIX MASONRY SCREW.......... 77 MULTI-FIX RESIN.................................. 84 MULTI-FIX STELLA........................ 68, 77 MULTI-FUNCTIONAL HANGERS.... 107 MULTI-PURPOSE DRILL BIT............. 124 MULTI-TOOL BLADES.... 155, 156, 157

N NAIL IN ANCHOR................................. 73 NAIL PLATES........................................ 111 NAILS....................................................... 91 NUTS........................................................ 52 NYLON BRICK LINE........................................... 188 NYLON CUP BRUSH........................... 137 NYLON FIXINGS.................................... 75 NYLON NUT........................................... 52 NYLON WHEEL BRUSH..................... 137

P PACKAGING TAPE.............................. 172 PACKERS............................................... 118 PADLOCKS........................................... 182 PENNY/REPAIR WASHER.................... 56 PICTURE HOOKS.................................. 59 PIPE CLIPS.............................................. 62 PLASTERBOARD FIXINGS.................. 68 PLASTIC PLUGS.................................... 72 POLYMER HEADED NAILS................. 90 POLYPROPYLENE ROPES................. 188 PROTECTIVE FILM.............................. 174

PVC INSULATION TAPE..................... 173 PVCU FRAME SCREWS....................... 40

R RAINWATER SCREWS.......................... 15 RATCHET STRAPS............................... 186 REBAR CUTTER................................... 123 RECIPROCATING SAW BLADES...... 150 RECTANGULAR PADLOCK.............................................. 184 RESIN....................................................... 84 RESTRAINT STRAPS........................... 110 ROLL FORGED JOBBER DRILL........ 132 ROOFING BOLT..................................... 48 ROPES.................................................... 188

S S2 DRIVER BITS................................... 163 SAFE....................................................... 185 SAFETY FRAME CRAMP................... 112 SANITARY FIXINGS.............................. 60 SCRATCH BRUSHES........................... 170 SCREW COVER CAPS........................... 20 SCREW EYES.......................................... 59 SCREW-IN FRAME TIE....................... 113 SDS ADAPTORS.................................. 166 SDS MAX HAMMER BIT.................... 122 SDS MAX STEELS............................... 122 SDS PLUS HAMMER BIT................... 120 SDS SHANK REBAR CUTTER........... 123 SECURITY CHAIN............................... 185 SELA COVER.......................................... 33 SELA WASHER....................................... 33 SELF-DRILLING SCREWS.................... 28 SELF-TAPPING SCREWS..................... 35 SERRATED FLANGE NUT.................... 53 SET.................................................... 49, 50 SHERARDISED LOOSE NAILS. 100, 101 SHIELD.................................................. 174 SHIELD ANCHORS............................... 81 SHIMS.................................................... 118 SLASH POINT SCREWS....................... 30 SOCKET DRIVERS............................... 166 SOCKET SCREWS.................................. 38 SOLO CHIPBOARD SCREWS.............. 16 SPEED PLUG.......................................... 70 SPEED WOOD AUGER BIT................ 127 SPRING TOGGLE................................... 69 SPRING WASHER.................................. 55 SQUARE PLATE..................................... 55 STAINLESS STEEL LOOSE NAILS.... 102 STAINLESS STEEL PADLOCK........... 183 STEP DRILL........................................... 136

STITCHING SCREWS............................ 28 STOCKINETTE ROLL.......................... 175 STRETCHER PLATE............................. 117 STUB DRILL.......................................... 133

T TAPE MEASURE................................... 169 TAPES.................................................... 172 TARPAULIN........................................... 175 TCT MULTI-PURPOSE DRILL BIT.... 124 TEE PLATE............................................ 117 THREADED BAR............................. 49, 83 THROUGHBOLT.................................... 80 TILE AND GLASS BIT......................... 125 TIMBER CONNECTORS..................... 109 TIMBER HANGER....................... 107, 108 TIMBER SCREWS.................................. 23 TRUSS CLIP.......................................... 109 TWIN-THREADED SCREWS............... 18

U UNIVERSAL FRAMING ANCHOR.... 112

V V5 IMPACT DRIVER BITS.................. 162 VELOCITY................................................. 8 VERTICAL FLANGE CLIP..................... 72 VINE EYES............................................... 59

W WALL STARTER KIT............................ 114 WALL TIE............................................... 113 WASHERS............................................... 55 WEATHERPROOF PADLOCK............ 182 WHEEL BRUSH.................................... 139 WINDOW BOARD TIE........................ 113 WINDOW FAB. SCREWS..................... 40 WING NUT.............................................. 54 WING TIP SCREWS............................... 31 WIPES.................................................... 175 WIRE BRUSH........................................ 137 WIRE BRUSHES................................... 170 WIRE HANGERS.................................... 73 WOOD DRILL BITS............................. 126 WORK-TOP CONNECTOR....................................... 116

Z ZIP-FIX.................................................... 68

191

NOTES

192

SUPPLIED BY:

ISSUE NO: 4