TIMco Stainless Steel Products Brochure by TIMco

NEW RANGE

STAINLESS STEEL PRODUCTS A SPECIALIST GUIDE BY TIMco

CONTENTS SCREWS 4-5 5 6 6 25 21 23

Hex Head Set Screws Socket Countersunk Screws Socket Button Screws Socket Cap Screws IN-DEX Timber Screws Classic Decking Screws Classic Screws

FASTENERS Carriage Bolts Hex Dome Nut Hex Full Nut Nylon Nut - T Type Threaded Bar Form A & B Washers Penny / Repair Washers

7-8 8 9 9 10 11-12 13

NAILS Firmahold Round Lost Head Round Wire Annular Ringshank Polymer Headed Nails / Pins

14-16 17 17 18 18-19

SECURITY SOLUTIONS Stainless Steel Padlock Disc Padlock

27 27

BRUSHES Wire Brushes

28-29

IRE +353 (0)4763538 sales@TIMco.ie â&#x20AC;¢ www.TIMco.ie

INFORMATION

HEAD TYPES

MATERIAL PROPERTIES Stainless steel is well known and an established material for use in fasteners. The most common type is known as A2 or 304 and typically selected for its good strength, excellent corrosion resistance, heat resistance, recyclability and aesthetic reasons. However, there are various types (e.g. Austentitic, Ferritic, Duplex, Martensitic, Super Alloy) and grades (e.g. A2, A4, 410), some of which are best suited to fasteners depending on their applications and working environments.

DOUBLE COUNTERSUNK

- A non-magnetic austenitic stainless steel suitable for many day to day external or corrosive applications offering an excellent resistance to corrosion. Also known as 304.

SOCKET BUTTON HEAD

A2 / AUST. SS

A4 / AUST. SS - Very similar to the A2 SS but more suitable for extremely corrosive applications, including coastal environments. Also known as 316.

CLEAN, DRY & LOW HUMIDITY ENVIRONMENTS

OCCASIONALLY DAMP/WET, RURAL AND SHELTERED AREAS.

INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

Improved design on the countersunk head to give additional head strength and assist countersinking.

COUNTERSUNK HEAD Designed for countersinking into metal for a flush or recessed finish. May have ribs to assist countersinking.

Designed for a raised finish with a flat underside to aid clamping.

SOCKET CAP HEAD An industry standard, requiring a hex key to loosen or tighten.

ROUND HEAD The round head for a higher clamping force in timber.

INDUSTRIAL & COASTAL AREAS WITH AN AGGRESSIVE SALT ATMOSPHERE

OVAL HEAD

An oval head designed for a smooth & semi concealed finish.

URBAN & INDUSTRIAL AREAS WITH A LOW SALT ATMOSPHERE

MATERIAL/SUBSTRATE GUIDE

HARDWOOD

SOFTWOOD

CHIPBOARD

MDF

PLASTIC

BRICK

CONCRETE / REINFORCED

STONE

HARD SANDSTONE

SANDSTONE

NONFERROUS

THIN SHEET METAL

STAINLESS STEEL

STEEL

ALUMINUM

STAINLESS STEEL STANDARD Of all the mainstream metals and alloys available today, stainless steel is regarded as probably the most recyclable, sustainable and environmentally friendly metal on the planet.

UK +44 (0)1829 261111 sales@TIMco.co.uk • www.TIMco.co.uk

HEX HEAD SET SCREWS

HEX HEAD SET SCREWS (DIN933) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

A fully threaded bolt used in a wide variety of applications. • Stainless steel A2-70. • Conforms to DIN 933.

BOX Product Code S616SS S620SS S625SS S630SS S640SS S650SS S820SS S825SS S830SS S835SS S840SS S850SS S860SS S880SS S8100SS S1020SS S1025SS S1030SS S1035SS S1040SS S1050SS S1060SS S1070SS S1080SS S10100SS S1230SS S1240SS S1250SS S1260SS

Size (mm)

A/F (mm)

Box Qty

Carton Qty (Box)

Carton Qty

M6 X 16 M6 X 20 M6 X 25 M6 X 30 M6 X 40 M6 X 50 M8 X 20 M8 X 25 M8 X 30 M8 X 35 M8 X 40 M8 X 50 M8 X 60 M8 X 80 M8 X 100 M10 X 20 M10 X 25 M10 X 30 M10 X 35 M10 X 40 M10 X 50 M10 X 60 M10 X 70 M10 X 80 M10 X 100 M12 X 30 M12 X 40 M12 X 50 M12 X 60

10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 19 19 19 19

200 200 200 200 200 200 200 200 100 100 100 100 100 50 50 100 100 100 100 100 50 50 50 50 50 50 50 50 50

20 16 14 14 10 8 10 7 14 14 12 8 7 10 8 10 10 8 7 6 12 8 8 7 7 10 8 8 7

4000 3200 2800 2800 2000 1600 2000 1400 1400 1400 1200 800 700 500 400 1000 1000 800 700 600 600 400 400 350 350 500 400 400 350

TYPE - SSS

BAG

SUB TYPE - SSS01

Product Code S616SSX S620SSX S625SSX S630SSX S640SSX S650SSX S820SSX S825SSX S830SSX S835SSX S840SSX S850SSX S860SSX S880SSX S8100SSX S1020SSX S1025SSX S1030SSX S1035SSX S1040SSX S1050SSX S1060SSX S1070SSX S1080SSX S10100SSX S1230SSX S1240SSX S1250SSX S1260SSX

Size (mm)

A/F Bag Carton (mm) Qty Qty (Bag)

TYPE - SSB

10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 17 19 19 19 19

10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 10 10 10 10 10 5 5 5 5 5 10 10 10 5

300 300 200 200 200 200 200 100 100 100 100 100 100 100 50 100 100 50 50 50 100 50 50 50 50 50 30 30 50

Carton Qty 3000 3000 2000 2000 2000 2000 2000 1000 1000 1000 1000 500 500 500 250 1000 1000 500 500 500 500 250 250 250 250 500 300 300 250

SUB TYPE - SSB03

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

SET & HEX NUTS / SOCKET SCREWS

SET (DIN933) AND HEX NUT (DIN934) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

A fully threaded bolt with hex nut, used in a wide variety of applications. • Stainless steel A2-70. • Conforms to DIN 933 & DIN934

PACK Product Code S616SSP S620SSP S625SSP S650SSP S820SSP S825SSP S840SSP S850SSP S1025SSP

PACK

Size (mm)

Nut A/F (mm)

Pack Qty

M6 x 16 M6 x 20 M6 x 25 M6 x 50 M8 x 20 M8 x 25 M8 x 40 M8 x 50 M10 x 25

10 10 10 10 13 13 13 13 17

8 8 6 4 6 4 2 2 2

Carton Carton Qty Qty (Pack) 50 400 50 400 50 300 50 200 50 300 50 200 50 100 50 100 50 100

Product Code S1030SSP S1040SSP S1050SSP S1070SSP S10100SSP S1230SSP S1240SSP S1250SSP

Size (mm)

Nut A/F (mm)

Pack Qty

M10 x 30 M10 x 40 M10 x 50 M10 x 70 M10 x 100 M12 x 30 M12 x 40 M12 x 50

17 17 17 17 17 19 19 19

2 2 2 2 2 2 2 2

TYPE - SOS

Carton Carton Qty Qty (Pack) 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100

SUB TYPE - SOS01

SOCKET COUNTERSUNK SCREWS (ISO10642) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

Designed for use in applications where the head is flush with joining parts. • Stainless Steel A2-70. • Conforms to ISO 10642.

BAG

BOX Product Code 616CSKSS 620CSKSS 625CSKSS 825CSKSS 830CSKSS

Size (mm) M6 X 16 M6 X 20 M6 X 25 M8 X 25 M8 X 30

Hex Drive (mm) 4 4 4 6 6

TYPE - SOS

Box Qty 500 200 200 100 100

Carton Qty (Box) 10 20 16 20 14

Carton Qty

SUB TYPE - SOS01

5000 4000 3200 2000 1400

Product Code 616CSKSSX 620CSKSSX 625CSKSSX 825CSKSSX 830CSKSSX

Size (mm) M6 X 16 M6 X 20 M6 X 25 M8 X 25 M8 X 30

Hex Drive (mm) 4 4 4 6 6

TYPE - SSB

Bag Qty 10 10 10 10 10

Carton Qty (Bag) 500 300 300 200 100

Carton Qty 5000 3000 3000 2000 1000

SUB TYPE - SSB04

UK +44 (0)1829 261111 sales@TIMco.co.uk • www.TIMco.co.uk

SOCKET SCREWS

SOCKET BUTTON SCREWS (ISO7380) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

To give an aesthetic fastening where a larger clamping surface area is required. • Stainless Steel A2-70. • Conforms to ISO 7380.

BOX Product Code 612BUTSS 616BUTSS 620BUTSS 625BUTSS 630BUTSS 825BUTSS

Size (mm) M6 X 12 M6 X 16 M6 X 20 M6 X 25 M6 X 30 M8 X 25

Hex Drive (mm) 4 4 4 4 4 6

BAG Box Qty 500 500 500 200 200 100

TYPE - SOS

Carton Qty (Box) 12 10 10 15 14 16

Carton Qty 6000 5000 5000 3000 2800 1600

SUB TYPE - SOS01

Product Code 612BUTSSX 616BUTSSX 620BUTSSX 625BUTSSX 630BUTSSX 825BUTSSX

Size (mm) M6 X 12 M6 X 16 M6 X 20 M6 X 25 M6 X 30 M8 X 25

Hex Drive (mm) 4 4 4 4 4 8

Bag Qty 10 10 10 10 10 10

TYPE - SSB

Carton Qty (Bag) 500 500 300 200 200 100

Carton Qty 5000 5000 3000 2000 2000 1000

SUB TYPE - SSB04

SOCKET CAP SCREWS (ISO4762) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

Socket head cap screws are designed to be used with the head protruding. • Stainless Steel A2-70. • Conforms to ISO 4762.

BOX Product Code 516CAPSS 520CAPSS 616CAPSS 620CAPSS 625CAPSS 820CAPSS 825CAPSS

Size (mm) M5 x 16 M5 x 20 M6 x 16 M6 x 20 M6 x 25 M8 x 20 M8 x 25

Hex Drive (mm) 4 4 5 5 5 6 6

TYPE - SOS

BAG Box Qty 500 500 200 200 200 200 200

Carton Qty (Box) 10 12 20 16 14 8 7

Carton Qty 5000 6000 4000 3200 2800 1600 1400

SUB TYPE - SOS01

Product Code 516CAPSSX 520CAPSSX 616CAPSSX 620CAPSSX 625CAPSSX 820CAPSSX 825CAPSSX

Size (mm) M5 x 16 M5 x 20 M6 x 16 M6 x 20 M6 x 25 M8 x 20 M8 x 25

Hex Drive (mm) 4 4 5 5 5 6 6

TYPE - SOS

Bag Qty 10 10 10 10 10 10 10

Carton Qty (Bag) 500 500 500 300 200 100 100

Carton Qty 5000 5000 5000 3000 2000 1000 1000

SUB TYPE - SOS01

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

CARRIAGE BOLTS

CARRIAGE BOLTS (DIN603) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

A domed head bolt mainly used for clamping timber or attaching ironmongery to timber. • Stainless Steel A2-70. • Conforms to DIN 603. NUTS SOLD SEPARATELY

BOX Product Code 0625CBSS 0630CBSS 0640CBSS 0650CBSS 0675CBSS 06100CBSS 0840CBSS 0850CBSS 0860CBSS 0875CBSS 0880CBSS 08100CBSS 08130CBSS 08150CBSS 1075CBSS 1090CBSS 10100CBSS 10110CBSS 10120CBSS 10130CBSS 10150CBSS 1275CBSS 12100CBSS 12110CBSS 12130CBSS 12150CBSS

BAG

Size (mm)

Box Qty

Carton Qty (Box)

Carton Qty

6 x 25 6 x 30 6 x 40 6 x 50 6 x 75 6 x 100 8 x 40 8 x 50 8 x 60 8 x 75 8 x 80 8 x 100 8 x 130 8 x 150 10 x 75 10 x 90 10 x 100 10 x 110 10 x 120 10 x 130 10 x 150 12 x 75 12 x 100 12 x 110 12 x 130 12 x 150

200 200 200 200 50 50 100 100 100 50 50 50 25 25 50 50 50 25 25 25 25 50 50 25 25 25

8 8 6 5 10 10 8 6 5 8 8 6 6 6 6 5 5 10 8 8 6 5 3 3 4 4

1600 1600 1200 1000 500 500 800 600 500 400 400 300 150 150 300 250 250 250 200 200 150 250 150 75 100 100

TYPE - CAS

SUB TYPE - CAS01

Product Code 0625CBSSX 0630CBSSX 0640CBSSX 0650CBSSX 0675CBSSX 06100CBSSX 0840CBSSX 0850CBSSX 0860CBSSX 0875CBSSX 0880CBSSX 08100CBSSX 08130CBSSX 08150CBSSX 1075CBSSX 1090CBSSX 10100CBSSX 10110CBSSX 10120CBSSX 10130CBSSX 10150CBSSX 1275CBSSX 12100CBSSX 12110CBSSX 12130CBSSX 12150CBSSX

Size (mm)

Bag Qty

Carton Qty (Bag)

Carton Qty

10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

200 200 100 100 50 50 100 100 100 100 100 50 50 50 50 50 50 50 50 50 30 50 30 30 30 20

2000 2000 1000 1000 500 500 1000 500 500 500 500 250 250 250 250 250 250 250 250 250 150 250 150 150 150 100

TYPE - SSB

SUB TYPE - SSB05

UK +44 (0)1829 261111 sales@TIMco.co.uk • www.TIMco.co.uk

CARRIAGE BOLTS, SETS & NUTS

CARRIAGE BOLT & NUT (DIN603) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

A domed head bolt mainly used for clamping timber or attaching ironmongery to timber. • Stainless Steel A2-70. • Conforms to DIN 603.

PACK Product Code 08100CBSSP 08130CBSSP 08150CBSSP 1075CBSSP 10100CBSSP 10120CBSSP 10130CBSSP 10150CBSSP 12100CBSSP 12130CBSSP

Size (mm)

Nut A/F

Pack Qty

M8 x 100 M8 x 130 M8 x 150 M10 x 75 M10 x 100 M10 x 120 M10 x 130 M10 x 150 M12 x 100 M12 x 130

13 13 13 17 17 17 17 17 19 19

4 3 2 3 2 2 2 2 2 2

TYPE - SOS

Carton Qty (Pack) 30 30 30 30 30 30 30 30 30 50

Carton Qty 120 90 60 90 60 60 60 60 60 100

SUB TYPE - SOS01

HEX DOME NUT (DIN1587) A2/AUST. STAINLESS STEEL

Ideal for protective or aesthetic uses. • Conforms to DIN1587. • Stainless Steel A2-70.

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

BAG

BOX Product Code

Size (mm)

A/F (mm)

Box Qty

Carton Qty (Box)

Carton Qty

ND5SS ND6SS ND8SS ND10SS ND12SS

M5 M6 M8 M10 M12

8 10 13 17 19

500 200 100 100 100

16 20 16 10 7

8000 4000 1600 1000 700

TYPE - NUS

SUB TYPE - NUS03

Product Code

Size A/F (mm) (mm)

ND5SSX M5 ND6SSX M6 ND8SSX M8 ND10SSX M10 ND12SSX M12

8 10 13 17 19

TYPE - SSB

Bag Qty

Carton Qty (Bag)

Carton Qty

10 10 10 10 5

500 300 200 100 100

5000 3000 2000 1000 500

SUB TYPE - SSB02

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

NUTS

HEX FULL NUT (DIN934)

NYLON NUT - T TYPE (DIN985)

A2/AUST. STAINLESS STEEL

1 2 3 4 5

INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

Used for all bolting and fastening applications. • Conforms to DIN934. • Stainless Steel A2-70.

Designed with integral nylon collar to prevent the nut from loosening. • Conforms to DIN985. • Stainless Steel A2-70.

BOX

Product Code

Size (mm)

A/F (mm)

Box Qty

Carton Qty (Box)

Carton Qty

Product Code

Size (mm)

A/F (mm)

Box Qty

Carton Qty (Box)

Carton Qty

NH4SS NH5SS NH6SS NH8SS NH10SS NH12SS NH16SS

M4 M5 M6 M8 M10 M12 M16

7 8 10 13 17 19 24

1000 1000 500 200 100 100 100

20 20 16 20 20 12 7

20000 20000 8000 4000 2000 1200 700

NT5SS NT6SS NT8SS NT10SS NT12SS NT16SS

M5 M6 M8 M10 M12 M16

8 10 13 17 19 24

1000 500 200 100 100 100

16 16 16 16 12 7

16000 8000 3200 1600 1200 700

TYPE - NUS

SUB TYPE - NUS01

TYPE - NUS

BAG Product Code

Size A/F (mm) (mm)

NH4SSX M4 NH5SSX M5 NH6SSX M6 NH8SSX M8 NH10SSX M10 NH12SSX M12 NH16SSX M16

7 8 10 13 17 19 24

SUB TYPE - NUS02

BAG Bag Qty

Carton Qty (Bag)

Carton Qty

Product Code

Size A/F (mm) (mm)

Bag Qty

Carton Qty (Bag)

Carton Qty

10 10 10 10 10 5 5

1000 600 350 300 150 200 100

10000 6000 3500 3000 1500 1000 500

NT5SSX NT6SSX NT8SSX NT10SSX NT12SSX NT16SSX

M5 M6 M8 M10 M12 M16

10 10 10 10 5 5

600 300 300 150 200 100

6000 3000 3000 1500 1000 500

TYPE - SSB

SUB TYPE - SSB02

8 10 13 17 19 24

TYPE - NUS

SUB TYPE - SSB02

PACK Product Code

Size Nut A/F (mm) (mm)

Bag Qty

Carton Qty (Bag)

Carton Qty

NH6SSP NH8SSP NH10SSP NH12SSP NH16SSP

M6 M8 M10 M12 M16

40 20 10 8 2

50 50 50 50 50

2000 1000 500 400 100

10 13 17 19 24

TYPE - SSB

SUB TYPE - SSB02

UK +44 (0)1829 261111 sales@TIMco.co.uk â&#x20AC;¢ www.TIMco.co.uk

THREADED BAR

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin. A metric thread in A2 stainless steel. A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

BUNDLE Product Code

Thread x Length (mm)

Qty

06TBSS 08TBSS 10TBSS 12TBSS 16TBSS 20TBSS

M6 x 1000mm M8 x 1000mm M10 x 1000mm M12 x 1000mm M16 x 1000mm M20 x 1000mm

5 5 5 5 5 5

TYPE - TBS

SUB TYPE -TBS01

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

WASHERS

FORM A WASHERS (DIN125-A) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

A traditional and commonly used washer for clamping and spacing applications. • Stainless Steel A2. • Conforms to BS4320, DIN 125-A

BOX Product Code

Size x Outer Ø (mm)

Thickness (mm)

Box Qty

Carton Qty (Box)

Carton Qty

WA4SS WA5SS WA6SS WA8SS WA10SS WA12SS WA16SS

M4 x 9 M5 x 10 M6 x 12 M8 x 16 M10 x 20 M12 x 24 M16 x 30

0.8 1 1.6 1.6 2 2.5 3

1000 1000 1000 500 500 200 100

60 40 20 24 12 16 18

60000 40000 20000 12000 6000 3200 1800

Size x Outer Ø (mm)

Thickness (mm)

Bag Qty

Carton Qty (Bag)

Carton Qty

M4 x 9 M5 x 10 M6 x 12 M8 x 16 M10 x 20 M12 x 24 M16 x 30

0.8 1 1.6 1.6 2 2.5 3

50 50 20 20 10 10 10

800 600 700 500 480 250 180

40000 30000 14000 10000 4800 2500 1800

Size x Outer Ø (mm)

Thickness (mm)

Pack Qty

Carton Qty (Pack)

Carton Qty

M6 x 12 M8 x 16 M10 x 20 M12 x 24 M16 x 30

1.6 1.6 2 2.5 3

50 30 20 10 6

2500 1500 1000 500 300

50 50 50 50 50

TYPE - WAS

SUB TYPE - WAS01

BAG Product Code WA4SSX WA5SSX WA6SSX WA8SSX WA10SSX WA12SSX WA16SSX TYPE - SSB

SUB TYPE - SSB01

PACK Product Code WA6SSP WA8SSP WA10SSP WA12SSP WA16SSP TYPE - SSB

SUB TYPE - SSB01

UK +44 (0)1829 261111 sales@TIMco.co.uk • www.TIMco.co.uk

WASHERS

FORM B WASHERS (DIN125-B) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

Thinner than a Form A, used for clamping and spacing applications. • Stainless Steel A2 • Conforms to BS4320, DIN 125-B.

BOX Product Code

Size x Outer Ø (mm)

Thickness (mm)

Box Qty

Carton Qty (Box)

Carton Qty

WB6SS WB8SS WB10SS WB12SS WB16SS

M6 x 12 M8 x 16 M10 x 20 M12 x 24 M16 x 30

0.8 1 1.25 1.6 2

1000 500 500 200 100

20 24 12 16 18

40000 15000 9000 4800 2400

Size x Outer Ø (mm)

Thickness (mm)

Bag Qty

Carton Qty (Bag)

Carton Qty

M6 x 12 M8 x 16 M10 x 20 M12 x 24 M16 x 30

0.8 1 1.25 1.6 2

20 20 10 10 10

18000 10000 6000 3800 2000

900 500 600 380 200

TYPE - WAS

SUB TYPE - WAS03

BAG Product Code WB6SSX WB8SSX WB10SSX WB12SSX WB16SSX TYPE - SSB

SUB TYPE - SSB01

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

WASHERS

PENNY/REPAIR WASHERS (DIN9054) A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

A large diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out. Sometimes known as a ‘mudguard’ washer. • Stainless Steel A2. • Conforms to DIN 9054.

BOX Product Code WP525SS WP625SS WP825SS WP835SS WP1025SS WP1035SS WP1235SS

Size x Outer Ø (mm)

Thickness (mm)

Box Qty

Carton Qty (Box)

Carton Qty

M5 x 25 M6 x 25 M8 x 25 M8 x 35 M10 x 25 M10 x 35 M12 x 35

1.5 1.5 1.5 1.5 1.5 1.5 1.5

200 200 200 200 200 200 200

24 24 24 24 12 12 12

4800 4800 4800 4800 2400 2400 2400

Size x Outer Ø (mm)

Thickness (mm)

Bag Qty

Carton Qty (Bag)

Carton Qty

M5 x 25 M6 x 25 M8 x 25 M8 x 35 M10 x 25 M10 x 35 M12 x 35

1.5 1.5 1.5 1.5 1.5 1.5 1.5

10 10 10 10 10 10 10

3800 3800 3800 2500 4000 2500 2500

380 380 380 250 400 250 250

Size x Outer Ø (mm)

Thickness (mm)

Pack Qty

Carton Qty (Pack)

Carton Qty

M6 x 25 M8 x 25

1.5 1.5

10 8

500 400

50 50

TYPE - WAS

SUB TYPE - WAS02

BAG Product Code WP525SSX WP625SSX WP825SSX WP835SSX WP1025SSX WP1035SSX WP1235SSX TYPE - SSB

SUB TYPE - SSB01

PACK Product Code WP625SSP WP825SSP TYPE - SSB

SUB TYPE - SSB01

COLLATED NAILS & FUEL CELLS DESIGNED FOR USE IN CORDLESS GAS & PNEUMATIC NAILERS

A2 AUSTENITIC STAINLESS STEEL

NEW ES SIZ

FirmaHold collated nails and fuel cells are designed for the fixing of a wide range of timber applications, using various types of pneumatic and cordless nailing tools.

BRAD NAILS Suitable for use in cordless & pneumatic 16 & 18 gauge second fix brad nailer. Nail & fuel cell packs. • Sold in one-piece strengthened branded boxes. • Diamond Point for maximum penetration. • T Head to give concealed fixings. • Shank Design: Low penetration resistance into all materials.

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

COLLATED BRAD NAILS

COLLATED BRAD NAILS Ideal for internal applications such as skirting, architrave, tongue and groove fixing, with a T head for a concealed finish. • T Head to give concealed fixings. • Shank Design: Low penetration resistance into all materials. A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

- New Sizes

16 GAUGE STRAIGHT BRADS Gauge

Length (mm)

Nails Per Strip

Collation Angle

16 16 16 16

25 38 50 64

50 50 50 50

Straight Straight Straight Straight

WITHOUT FUEL CELLS

WITH FUEL CELLS Product Code

Box Qty

Fuel Cell Carton Qty Qty

Product Code

Box Qty

Carton Qty

BSS1625 BSS1638 BSS1650 BSS1664

2,000 2,000 2,000 2,000

24,000* 24,000* 24,000* 24,000*

A2 STAINLESS STEEL BSS1625G BSS1638G BSS1650G BSS1664G

2,000 2,000 2,000 2,000

TYPE - FRT

2 2 2 2

20,000* 20,000* 20,000* 20,000*

SUB TYPE - FRT07

TYPE - FRT

SUB TYPE - FRT08

18 GAUGE STRAIGHT BRADS Gauge

Length (mm)

Nails Per Strip

Collation Angle

18 18 18 18 18

19 25 32 38 50

100 100 100 100 100

Straight Straight Straight Straight Straight

Product Code

Box Qty

Fuel Cell Carton Qty Qty

Product Code

Box Qty

Carton Qty

BSS1819 BSS1825 BSS1832 BSS1838 BSS1850

5,000 5,000 5,000 5,000 5,000

100,000 100,000 60,000 60,000 60,000

A2 STAINLESS STEEL -

TYPE - FRT

SUB TYPE - FRT07

Length (mm)

Nails Per Strip

Collation Angle

16 16

38 50

50 50

20° 20°

TYPE - FRT

Product Code

Box Qty

Fuel Cell Carton Qty Qty

SUB TYPE - FRT08

WITHOUT FUEL CELLS

WITH FUEL CELLS

16 GAUGE 20° ANGLED BRADS Gauge

Product Code

Box Qty

Carton Qty

ABSS1638 ABSS1650

2,000 2,000

12,000* 12,000*

A2 STAINLESS STEEL ABSS1638G 2,000 ABSS1650G 2,000 TYPE - FRT

2 2

20,000* 20,000*

SUB TYPE - FRT07

TYPE - FRT

SUB TYPE - FRT08

UK +44 (0)1829 261111 sales@TIMco.co.uk • www.TIMco.co.uk

CLIPPED HEAD COLLATED NAILS

For use in structural applications using high quality paper collation for reduced nail jams. • Clipped head to increase the number of nails per strip and therefore reduce tool loading times. • Diamond Point for maximum penetration. • 34° collation angle.

A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

BSEN 14592-2008

Tested by

WITHOUT FUEL CELLS

WITH FUEL CELLS

RETAIL PACK Dia.

Length (mm)

Shank Type

Service Class

2.8 2.8

50 63

Ringed Ringed

3 3

Product Code

Box Qty

Fuel Cell Carton Qty Qty

Product Code

Box Qty

Carton Qty

CSSR50 CSSR63

1,100 1,100

4,400* 4,400*

A2 STAINLESS STEEL CSSR50G CSSR63G

1,100 1,100

TYPE - FRT

1 1

4,400* 4,400*

SUB TYPE - FRT01

YPE - FRT

SUB TYPE - FRT02

WHAT IS A SERVICE CLASS? Within Eurocode 5, structural fasteners must comply to certain levels of rust protection, which are graded by Service Classes.

CLASS 1 - For Internal use or where the moisture content of the timber will not exceed 12%. Fasteners conforming to Service Class 1 do not require any rust protective coatings.

WHAT IS EUROCODE 5? Eurocode 5 is the new regulation for Timber Structures that replaces previous building regulations and stipulates that all nails must be manufactured to comply with BS EN: 14592. 16

CLASS 2 - For covered exterior applications where the timber is protected from direct wetting or where the timber moisture content does not exceed 20%. Nails conforming to Service Class 2 must have a minimum of 12 µm of Zinc. CLASS 3 - External application and over 43 microns of hot dipped galvanised protection.

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

NAILS

ROUND LOST HEAD NAILS

The head can be punched below the surface for a concealed finish. • Stainless Steel A2 A2/AUST. STAINLESS STEEL

1 2 3 4 5

1kg Bag

1KG BAG

Product Code

Length (mm)

SSLH50B SSLH65B

50 65

TYPE - SSN

INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

10kg Box

Dia.

Approx Nails (Per kg)

2.65 3.35

465 222

TYPE - SSN05

10KG BOX

Product Code

Length (mm)

Dia.

SSLH50 SSLH65

50 65

2.65 3.35

TYPE - SSN

Approx Nails (Per kg) 465 222 SUB TYPE - SSN02

ROUND WIRE NAILS

General use with full round head for clamping. • Stainless Steel A2

1kg Bag

A2/AUST. STAINLESS STEEL

Product Code

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

BSEN 14592-2008

SSRW75B SSRW100B

1KG BAG Length (mm)

Dia.

Approx Nails (Per kg)

75 100

3.75 4.00

151 98

TYPE - SSN

10kg Box Product Code SSRW75 SSRW100

SUB TYPE - SSN06

10KG BOX Length (mm)

Dia.

Approx Nails (Per kg)

75 100

3.75 4.00

151 98

TYPE - SSN

SUB TYPE - SSN03

UK +44 (0)1829 261111 sales@TIMco.co.uk • www.TIMco.co.uk

NAILS

ANNULAR RINGSHANK NAILS

Annular rings provide additional holding power, where increased grip is required. • Stainless Steel A2

Product Code

A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

1kg Bag

SSAR40B SSAR50B SSAR65B SSAR75B SSAR100B

BSEN 14592-2008

1KG BAG Length (mm)

Dia.

Approx Nails (Per kg)

40 50 65 75 100

2.65 2.65 3.35 3.75 4.5

571 454 219 151 79

TYPE - SSN

10kg Box

TYPE - SSN04

10KG BOX

Product Code

Length (mm)

Dia.

Approx Nails (Per kg)

SSAR40 SSAR50 SSAR65 SSAR75 SSAR100

40 50 65 75 100

2.65 2.65 3.35 3.75 4.5

571 454 219 151 79

TYPE - SSN

SUB TYPE - SSN01

POLYMER HEADED NAILS • A4 Stainless Steel ringshank • UV Stable. • Impact Resistant.

A4 STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL & COASTAL AREAS WITH A MODERATE SALT ATMOSPHERE

BOX Product Code

Finish

Size (mm)

Shank Ø (mm)

Head (mm)

Box Qty

Carton Qty (Box)

Carton Qty

PN40W PN50W PN50O PN50BR PN50BL PN65W PN65BR PN65BL

White White Oak Mahogany Black White Mahogany Black

40 50 50 50 50 65 65 65

3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2

12 12 12 12 12 12 12 12

100 100 100 100 100 100 100 100

35 35 35 35 35 35 35 35

3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500

TYPE - PIN

SUB TYPE - PIN01

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

POLY PINS / CLAD PINS

POLYMER HEADED PINS • A4 Stainless Steel ringshank • UV Stable. • Impact Resistant.

A4 STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL & COASTAL AREAS WITH A MODERATE SALT ATMOSPHERE

BOX Product Code PP25M PP25W PP25BEIGE PP30W PP30O PP30BR PP30BL PP40W PP40O PP40BR PP40BL

Finish

Size (mm)

Shank Ø (mm)

Head (mm)

Box Qty

Carton Qty (Box)

Carton Qty

Mahogany White Beige White Oak Mahogany Black White Oak Mahogany Black

25 25 25 30 30 30 30 40 40 40 40

2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1

6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4

250 250 250 250 250 250 250 250 250 250 250

35 35 35 35 35 35 35 35 35 35 35

8,750 8,750 8,750 8,750 8,750 8,750 8,750 8,750 8,750 8,750 8,750

TYPE - PIN

SUB TYPE - PIN02

CLAD PINS • A4 Stainless Steel ringshank.

A4 STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL & COASTAL AREAS WITH A MODERATE SALT ATMOSPHERE

BOX Product Code CP30

Size (mm) 30

TYPE - PIN

Shank Ø (mm)

Head (mm)

Box Qty

Carton Qty (Box)

Carton Qty

2.1

4.0

250

8,750

SUB TYPE - PIN03

DECKING SCREWS ADVANCED DECKING SCREW

DOUBLE COUNTERSUNK

This innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists.

Important Features:

POZI

HELIX

Industrial areas with a moderate salt atmosphere

CORROSION RATING

Reduces the likelihood of head shear and assists completion of countersinking.

APPROVED

The helix is for removing debris and improving clamping.

A2 STAINLESS STAINLESS STEEL To exceed 1000hrs salt spray.

TYPE 17 SLASH To reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

CLASSIC DECKING SCREWS

DECKING SCREW A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

A premium decking screw. • Stainless Steel A2

1 FREE POZI DRIVER BIT IN EVERY TUB

TUB Product Code 50DEXSS250 65DEXSS250

Size (mm)

Size (Imp.)

Driver Bit Size

Tub Qty

Carton Qty (Tub)

Carton Qty

4.5 x 50 4.5 x 65

9x2 9 x 21/2

No.2 No.2

250 250

4 4

1,000 1,000

TYPE - IDD

SUB TYPE - IDD03

Our best selling multi-purpose screw, over 4.3 billion sold to date

EXCEPTIONAL RELIABILITY AND STRENGTH The TIMco Multi-Purpose Classic Screw enables the user to rely on one product for a variety of applications. Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication in stainless steel. Ensures the screw will consistently perform eﬃciently in hardwood, chipboard, MDF, plastic and thin sheet metal, while offering exceptional holding power.

POZI

Industrial areas with a moderate salt atmosphere

CORROSION RATING

A2 STAINLESS

NEW TYPE 17

Reduces the likelihood of head shear and assists completion of countersinking.

FULLY THREADED UP TO 70MM Thereafter partially threaded.

MOLECULAR LUBRICATION

Important Features:

DOUBLE COUNTERSUNK

APPROVED

Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion.

40° DEEP SINGLE THREAD To provide a secure fixing with high pull-out resistance.

SINGLE SLASH

To reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge.

The TIMco Classic multi-use purpose screws carry the mark in compliance with the Construction Products Regulations (Eurocode 5 EN1995-1-1)

IRE +353 (0)4763538 sales@TIMco.ie â&#x20AC;¢ www.TIMco.ie

CLASSIC SCREWS

MULTI-PURPOSE SCREW - STAINLESS STEEL A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

An A2 stainless steel screw ideal for highly corrosive environments for use in timber with an high acid content.

BOX Product Code 30012CLASS 30016CLASS 30020CLASS 30025CLASS 35012CLASS 35016CLASS 35020CLASS 35025CLASS 35030CLASS 35035CLASS 35040CLASS 35050CLASS 40016CLASS 40020CLASS 40025CLASS 40030CLASS 40035CLASS 40040CLASS 40045CLASS 40050CLASS 40060CLASS 40070CLASS 45025CLASS 45030CLASS 45040CLASS 45050CLASS 45060CLASS 50025CLASS 50030CLASS 50035CLASS 50040CLASS 50050CLASS 50060CLASS 50070CLASS 50080CLASS 50090CLASS 50100CLASS 60040CLASS 60050CLASS 60060CLASS 60070CLASS 60080CLASS 60100CLASS 60130CLASS 60150CLASS

Size (mm)

Size (Imp.)

Driver Bit Size

Box Qty

Carton Qty

3.0 x 12 3.0 x 16 3.0 x 20 3.0 x 25 3.5 x 12 3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50 4.0 x 16 4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 4.0 x 70 4.5 x 25 4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 90 5.0 x 100 6.0 x 40 6.0 x 50 6.0 x 60 6.0 x 70 6.0 x 80 6.0 x 100 6.0 x 130 6.0 x 150

4 x 1/2 4 x 5/8 4 x 3/4 4x1 6 x 1/2 6 x 5/8 6 x 3/4 6x1 6 x 1 1/4 6 x 1 3/8 6 x 1 1/2 6x2 8 x 5/8 8 x 3/4 8x1 8 x 1 1/4 8 x 1 3/8 8 x 1 1/2 8 x 1 3/4 8x2 8 x 2 1/2 8 x 2 3/4 9 x 1 5/8 9 x 1 1/4 9 x 1 1/2 9x2 9 x 2 1/2 10 x 1 10 x 1 1/4 10 x 1 3/8 10 x 1 1/2 10 x 2 10 x 2 1/2 10 x 2 3/4 10 x 3 10 x 3 1/2 10 x 4 12 x 1 1/2 12 x 2 12 x 2 1/2 12 x 2 3/4 12 x 3 12 x 4 12 x 5 1/8 12 x 6

No.1 No.1 No.1 No.1 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.2 No.3 No.3 No.3 No.3 No.3 No.3 No.3 No.3

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 100

28,000 28,000 28,000 15,000 28,000 28,000 15,000 15,000 15,000 10,000 7,000 7,000 15,000 15,000 15,000 15,000 10,000 10,000 7,000 7,000 3,000 3,000 10,000 10,000 7,000 3,000 3,000 10,000 7,000 7,000 7,000 3,000 3,200 3,200 3,200 1,500 1,500 3,000 3,200 3,200 2,400 2,400 1,500 1,200 1,200

TYPE - CSS

SUB TYPE - CSS01

MIXED TRAY Product Code

Size (mm)

Trays Per Carton 895 6

Size Driver Screw Tray (Imp.) Bit Size Qty Qty

STSTTRAY CONTENTS OF TRAY 3.5 x 16 6 x 5/8 No.2 200 3.5 x 25 6 x 1 No.2 100 3.5 x 30 6 x 1 1/4 No.2 100 4.0 x 20 8 x 3/4 No.2 100 4.0 x 25 8 x 1 No.2 60 4.0 x 30 8 x 1 1/4 No.2 50 4.0 x 40 8 x 1 1/2 No.2 70 4.0 x 50 8 x 2 No.2 60 4.0 x 60 8 x 2 1/2 No.2 50 5.0 x 40 10 x 1 1/2 No.2 30 5.0 x 50 10 x 2 No.2 40 5.0 x 60 10 x 2 1/2 No.2 35 TYPE - CSS

SUB TYPE - CSS02

PACK Product Code 35030CHSSP 40025CHSSP 40030CHSSP 40040CHSSP 40050CHSSP 50050CHSSP 50060CHSSP 50070CHSSP 50080CHSSP 50100CHSSP

Size (mm) 3.5 x 30 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 5.0 x 50 5.0 x 60 5.0 x 70 5.0 x 80 5.0 x 100

Outer Driver Pack Bag Qty Bit Size Qty (Pack) 6 x 1 3/8 No.2 30 10 8x1 No.2 25 10 8 x 1 1/4 No.2 20 10 8 x 1 1/2 No.2 15 10 8x2 No.2 14 10 10 x 2 No.2 10 10 10 x 2 1/2 No.2 8 10 10 x 2 3/4 No.2 7 10 10 x 3 No.2 6 10 10 x 4 No.2 4 10

TYPE - PAK

Size (Imp.)

SUB TYPE - PAK02

TIMBER, DECKING & EXTERNAL SCREWS Available in 8mm hex head countersunk with a fixed washer or wafer head with T30/T40 recess

PATE CORR NTED O RESIS SION T PLAT ANT ING

Patented Molecular Lubrication to increase insertion speed.

50Â° Deep Single Thread to provide secure fixing with high pull-out resistance

Type 17 Slash to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

25Â° Sharp Point for easier penetration into all wood types

STAINLESS STEEL Made from A4 marine grade Stainless Steel

Made from A2 Austenitic Stainless Steel

WARNING Stainless Steel must be used where there is a corrosive environment and/or where the base material has inherent corrosive characteristics e.g. Green Oak A pilot hole is recommended to be used for Stainless Steel.

IRE +353 (0)4763538 sales@TIMco.ie â&#x20AC;¢ www.TIMco.ie

IN-DEX TIMBER SCREWS

TIMBER SCREW - HEX HEAD

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. This screw is ideal for outdoor applications.

A4 STAINLESS STEEL

BSEN 14592-2008

1 2 3 4 5 INDUSTRIAL & COASTAL AREAS WITH A MODERATE SALT ATMOSPHERE

BAG Product Code 75INDEXSST 100INDEXSST 125INDEXSST 150INDEXSST TYPE - IND

Size (mm)

Socket Size (mm)

Bag Qty

Carton Qty (Box)

Carton Qty

6.7 x 75 6.7 x 100 6.7 x 125 6.7 x 150

8 8 8 8

25 25 25 25

40 30 30 25

1,000 750 750 625

SUB TYPE - IND03

PILOT HOLE REQUIRED

TIMBER SCREW - WAFER HEAD A2/AUST. STAINLESS STEEL

1 2 3 4 5 INDUSTRIAL AREAS WITH A MODERATE SALT ATMOSPHERE

Designed for decking, stairs, fences, roofing and landscaping. This screw is ideal for outdoor applications.

1 FREE T40 DRIVER BIT IN EVERY BOX

BOX Product Code 75INDEXSST TYPE - IND

BSEN 14592-2008

Size (mm)

Socket Size (mm)

Bag Qty

Carton Qty (Box)

Carton Qty

6.7 x 75

1,000

SUB TYPE - IND04

PILOT HOLE REQUIRED

PREMIUM QUALITY

PADLOCKS & SECURITY SOLUTIONS

APPLICATIONS

Gates

Sheds

Shutters

Garages

WEATHER RATINGS

TIMco have brought together a carefully selected range, of padlocks and security solutions. Provides maximum protection

Provides minimum protection

SECURITY RATINGS 1 Low

Medium

10 High

These are aimed towards covering the maximum number of everyday domestic and industrial situations, with consideration to low and high security, to indoor and outdoor applications.

IRE +353 (0)4763538 sales@TIMco.ie â&#x20AC;¢ www.TIMco.ie

PADLOCKS

STAINLESS STEEL PADLOCK A medium to high security padlock designed to handle extreme weather conditions. The shrouded shackle ensures maximum resistance against cutting and prying. Ideal for shutters, gates, garages and sheds.

SECURITY

WEATHER

PACK Product Code

Size (mm)

Shackle Gauge (mm)

Security Rating

Weather Rating

Keys

Pack Qty

Box Qty

SS50SS

TYPE - PAD

SUB TYPE - PAD09

DISC PADLOCK A corrosion resistant high security padlock used for securing chain and catches where there is a risk of cropping attacks.

SECURITY

WEATHER

PACK Product Code DP70

Size (mm)

Shackle Gauge (mm)

Security Rating

Weather Rating

Keys

Pack Qty

Box Qty

TYPE - PAD

SUB TYPE - PAD04

UK +44 (0)1829 261111 sales@TIMco.co.uk â&#x20AC;¢ www.TIMco.co.uk

WIRE BRUSHES

STAINLESS STEEL

WIRE BRUSHES

SUITABLE FOR DRILL DRIVERS & ANGLE GRINDERS REMOVES PAINT REMOVES RUBBER REMOVES RUST ...AND MORE For use on Stainless Steel applications to avoid contaminating the base material.

TWISTED KNOT WIRE BRUSH The 0.5mm left-hand twist wire is hard wearing and gives an aggressive removal of paint, rust, rubber, concrete or dirt whilst maintaining its shape. The metal ring around the base of the cup reduces the likelihood of centrifugal-splay and can also be removed to increased usage life.

BLISTER PACK Product Code 100TCTSS

Dia. (mm)

Arbor

Wire Thickness

Max R.P.M

Pack Qty

Secondary Box Qty (Pack)

Carton Qty (Pack)

100

M14

0.5

8,500

TYPE - PTB

SUB TYPE - PTB01

IRE +353 (0)4763538 sales@TIMco.ie â&#x20AC;¢ www.TIMco.ie

WIRE BRUSHES

CRIMPED WIRE CUP BRUSH Ideal for lightly removing loose paint, rust or dirt without scarring or contaminating the base material.

BLISTER PACK Product Code 75TCCSS 100TCCSS

Dia. (mm)

Arbor

Wire Thickness

Max R.P.M

Pack Qty

Secondary Box Qty (Pack)

Carton Qty (Pack)

75 100

M14 M14

0.5 0.5

8,500 8,500

1 1

5 5

60 30

TYPE - PTB

SUB TYPE - PTB01

TWISTED KNOT WIRE BRUSH Ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas.

BLISTER PACK Product Code 115TWTSS

Dia. (mm)

Arbor

Wire Thickness

Max R.P.M

Pack Qty

Secondary Box Qty (Pack)

Carton Qty (Pack)

115

M14

0.5

12,500

TYPE - PTB

SUB TYPE - PTB01

TWISTED KNOT BEVEL WIRE BRUSH Ideal for aggressive removal of paint, rust, rubber, concrete or dirt. Ideal for accessing awkward areas.

BLISTER PACK Product Code 100TBTSS

Dia. (mm)

Arbor

Wire Thickness

Max R.P.M

Pack Qty

Secondary Box Qty (Pack)

Carton Qty (Pack)

100

M14

0.5

12,500

TYPE - PTB

SUB TYPE - PTB01

FAQ's STAINLESS STEEL FAQ's Why use a stainless steel fastener? What grade is best? What makes stainless steel so special? What markets use stainless steel? Where should you use it? Is it expensive? Is it magnetic? Are there any downsides? Is it really 'green'? TURN THE PAGE TO SEE MORE QUESTIONS AND ANSWERS...

IRE +353 (0)4763538 sales@TIMco.ie â&#x20AC;˘ www.TIMco.ie

FAQ

1) Why use a stainless steel fastener? SECURING WOOD: Whether you are fixing decking, cladding or constructing buildings the wood contains water, tannins, pigments, oils and when in contact with a metal fixing corrosion begins. Adverse conditions (e.g. moisture in the air, acidic rain, salts, chlorine, higher temperatures) can accelerate the process and lead to discolouration around the location, and/or failure of the fixing along with deterioration of the wood in contact with the fixing. Stainless steel has properties that resist the corrosion process and hence are favoured by Carpenters, Joiners, Architects and Engineers. The rate at which acetic acid is liberated depends on the chemical constitution of the wood from which it is derived. This varies with species and largely accounts for the considerable differences in rates of production of acetic acid between timbers. Hardwoods are more prone to the natural releasing of acetic acids e.g. Oak, Cedar, Redwoods, Sweet Chestnut and Douglas Fir. In practice, kiln dried woods are much more likely to cause corrosion than air dried woods.

SECURING METAL: Stainless steels are often selected for their corrosive resistance and good practice recommends continuity of material type with the fastener to ensure fit for purpose and longevity of service life. Stainless steel is less prone to corrode than carbon steel or aluminium making it the preferred choice. They are also suited to fix other metal types (e.g. aluminium sheets, steel pipes) but working environments can cause bimetallic (galvanic) corrosion and movement can cause galling (â&#x20AC;&#x153;weldingâ&#x20AC;?) so other precautionary measures may be required.

2) What grade is best? There are a multitude of types and grades of stainless steels. Since the microstructure of stainless steels has a decisive effect on properties, stainless steels have been divided into types depending on their microstructure at room temperature; Ferritic, Martensitic, Duplex and Austenitic. The addition of different elements during manufacturing creates the different types and grades. Most popular and readily available for fasteners is A2 austenitic stainless steel (also referred to as 18/8, 304 and EN 1.4301), this grade has a typical composition of 18% Chromium and 8% Nickel. For use in harsher environments, e.g. coastal, chemical, A4 also referred to as Marine grade, 316, EN1.4401, which has the element Molybdenum added is more suitable as the addition provides further resistance to corrosion.

NITON XRF ANALYSER

FAQ

UK +44 (0)1829 261111 sales@TIMco.co.uk â&#x20AC;˘ www.TIMco.co.uk

3) What makes stainless steel so special? Stainless steels form a self protecting oxide layer when the right amount of chromium is added during manufacture. This layer self repairs in both dry and wet atmospheres without the need of costly painting, cleaning or maintenance. Improvements in manufacturing allow different amounts of elements to be added accurately to create this incredibly versatile alloy.

4) What markets use stainless steel now? The Food, Drink, Pharmaceutical and Chemical industries have utilised the benefits of stainless steel for many years for reasons of cleanliness, resistance to chemicals, preventing contamination and ensuring the quality of our daily drinks, food and drugs. Likewise the Oil, Gas and Marine industries are reliant on stainless steel to survive the harsh conditions of exploration and distribution of fuel and transport around the globe. However with the development of supply chains and logistics, Stainless Steel fasteners are now more readily available to the public and professionals via multiple outlets, no longer is it to be considered as a specialist product.

5) Where should you use stainless steel? There are three main geographical areas: Coastal, Industrial and Urban. Interestingly, coastal conditions in Great Britain can be found up to 10 miles inland. Industrial areas are usually self-contained within the manufacturing plant and specified within the construction and maintenance schedules. Urban areas especially near roads suffer from traffic pollution and salt from de-icing roads that can travel in the wind and attack buildings, bridges, tunnels, facades, cladding etc. Constructions 200m away from a busy road and 12 storeys high have been found to suffer measurable chloride corrosion.

6) Is stainless steel expensive? Compared to Carbon Steel fasteners, Stainless are typically of higher value. However as global production increases and Nickel prices remain low, the A2 stainless steel offers incredible value for money. The element Nickel is an important constituent of the alloy and historically been a cause of price volatility. Global markets dictate exchange rates, import tariffs, transportation costs, alloying element costs, production capacity and supply volumes; all factors determining the price of stainless steel. 32

IRE +353 (0)4763538 sales@TIMco.ie • www.TIMco.ie

FAQ

7) How do I know if it’s stainless steel? Several plated products especially Zinc plated products look very similar however once installed the cost of failure or “bleeding” can have significant costs. The supply chain needs to have quality assurance processes and quality control checks to ensure the correct chemical composition of fasteners. New testing facilities at TIMco test the chemical composition of all products to check the stainless grades and provide the reassurance that customers need.

NO RUST RUST

8) Is stainless steel magnetic? Stainless in general tends to be LESS magnetic than "ordinary" steel, and some grades are non-magnetic. Stainless steel bolts can become slightly magnetic when processed by cold working. Even though the "raw material" going into the bolt making machine is non-magnetic, the process of forming the head and threads may cause the bolts coming out of the machine to be slightly magnetised.

9) Are there any downsides to stainless steel? Not many! Compared to Carbon Steel fasteners it is softer and so pilot holes are recommended for wood screws in hardwoods whilst bolts need to be tightened slowly and less, preferably with some lubrication to reduce galling. Torque setting tables and torque wrench tools are highly recommended. As with most things in life, better products cost more.

10) Other factors driving the uptake of stainless? Stainless steel is particularly suited to large-scale installations in segments of the commercial and public sector, such as hospitals, children’s homes, sheltered housing, prisons, schools and hotels; in other words anywhere there is a health & safety issue.

11) Where can I get stainless steel fasteners? TIMco’s network of distributors can provide most stainless steel fasteners from stock or as a next day delivery service. As the world wakes up to the benefits of stainless more types and sizes will become available. 33

FAQ

UK +44 (0)1829 261111 sales@TIMco.co.uk â&#x20AC;˘ www.TIMco.co.uk

12) Where can I find examples of stainless steel? The Chrysler building is probably the most famous of all the landmarks for its use of stainless steel, erected in 1930 in New York, it has only been cleaned 3 times and is still in perfect condition. The North Sea oil and gas industry has been built on the reliability of stainless steel in oil rigs and pipes. Every kitchen and restaurant will be full of stainless screws holding pipes, tables, sinks and toilets in place. New air conditioning units contain stainless steel filters to prevent bacteria growth. The internet and social media has an ever growing array of images and projects that are underpinned by stainless. Check out the horse heads (the Kelpies) in Falkirk.

13) Is stainless steel really envionmentally friendly? Yes, of all the mainstream metals and alloys available today, stainless steel is regarded as probably the most recyclable, sustainable and environmentally friendly metal on the planet.

CHRYSLER BUILDING

IRE +353 (0)4763538 sales@TIMco.ie â&#x20AC;¢ www.TIMco.ie

CHEMICAL TABLE

CHEMICAL COMPOSITION CHEMICAL COMPOSITION % 1)

Grade A2

(304)

(316)

410

Elements S

Mo8)

Notes

0.1

1.0

2.0

0.05

0.03

15-20

8.0-19.0

3, 4, 5, 6, 7

0.08

1.0

2.0

0.045

0.03

16-18.5

2.0-3.0

10.0-15.0

3, 4, 5, 6

0.09 - 0.15 1.0

1.0

0.05

0.03

11.5-13.5

1.0

Notes: 1) Maximum values unless stated otherwise. 3) May contain Titanium <5 x C up to 0.8% 4) May contain Niobium and/or Titanium >10 x C up to 1.0% 5) Containing Titanium >5 x C up to 0.8% 6) May contain Copper up to 4.0% 7) Molybdenum may also be present at manufacturers option. 8) Maximum Molybdenum content may be specified in certain applications. Elements: C - Carbon Si - Silicon Mn - Manganese P - Phosphorous S - Sulphur Cr - Chromium Mo - Molybdenum Ni - Nickel

+44 (0)1829 261111 Northern Ireland: +44 (0)2890992305 Ireland: +353 (0)4763538 UK:

www.TIMco.co.uk www.TIMco.ie T.I. Midwood & Co Ltd TIMco House, Green Lane, Wardle, Nantwich, CW5 6BJ Fax: +44 (0)1829 261102 Fax: +44 (0)1829 261093 sales@TIMco.co.uk

facebook.com/TIMcoUKIRELAND

Aviemore House, Hill Street, Monaghan, Ireland Fax: +353 (0)4763539 sales@TIMco.ie

twitter.com/TIMCo_tweets

Distributed by:

Version 1

RS14446

linkedin.com/company/timco