Power Solutions for telecom applications
Energy Solutions Provider
TEL-IN-DO-US-21
An energy solution SDMO is renowned as one of the top manufacturers of generating sets worldwide. SDMO's single-industry strategy enables it to offer the largest range on the market, a reliable and long-lasting source of energy, conforming to the most stringent standards. Its ranges and services undergo continuous improvement, allowing them to meet even the most exacting energy requirements. This strategy of constant innovation allows SDMO to meet the dual challenge of naturally controlled energy, both from an economic and an environmental point of view. By relying on the proximity of its distribution network, the largest possible number can have access to electricity. In addition to its role as an industrial manufacturer of generating sets, SDMO is now positioning itself as a serious energy supplier.
Energy Solutions Provider
whatever the energy required Whether you require emergency power to be able to cope with potential power cuts (e.g. hospitals, shopping centres) or continuous power when conventional electrical grids are faulty (power plants), SDMO will be able to offer you a large range of performance products which meet all the requirements of the market. This range comprises 3 main categories:
•Standard products (Portable Power, Residential Power, Power Products and Rental Power) •Expertise and Services (Power Solutions, Training, Spare Parts, Technical Assistance) •Related products (Nexys, Telys, Kerys command/control units)
2
National coverage, international presence, "think globally, act locally"
In order for SDMO to continue to grow and expand into new markets, it relies on: • a distribution network present in over 150 countries, • 8 overseas subsidiaries, • 5 offices, • 7 sales offices and 3 regional divisions in France. The responsiveness of the company is based on its development of 5 storage platforms which, in co-operation with the subsidiaries, constitute an efficient commercial network. The links forged with the Kohler group have strengthened SDMO's standing amongst its customers through a strategy of synergistic installations.
SDMO Head Office SDMO locations Agents/Distributors SDMO Stock
Market logic for greater responsiveness
The production plants in Brest are organised according to product lines relating to the product range offer: • a production site for Portable Power generating sets and for Power Products with lower power. • a production site for Power Products, Rental Power and Power Solutions ranges. A dedicated laboratory, 69 test platforms (from 40 to 4000 kVA) and a training academy complement the available equipment with perfect consistency. SDMO strengthens its position as a reliable and responsive partner through an overall synergy between the industrial teams and sales and marketing departments: prescription, responsiveness, and presence in key markets.
3
POWER SOLUTIONS Made-to-measure power
Proactive engineering for specific applications From the simplest of installations to the most complex, with the Power Solutions range, the engineering department at SDMO will strive to accommodate all requests, regardless of energy requirements. The department's international experience coupled with its involvement in some of the most groundbreaking projects seen on the planet are proof of this.
Engineering: a global process - understanding - analysing the exact requirements - offering real solutions - integrating innovative solutions - designing complete programs - carrying out the installation - following up with technical inspections
Additional teams
SDMO's expert technicians and engineers are trained to master the latest design and analysis tools. They have access to advanced 3D modelling software incorporating a very precise structural calculation module. SDMO's test engineers also use a state-of-the-art technique for analysing sound emissions sound intensity measurement - which, used in conjunction with modal analysis for determining vibrational frequencies, enables them to carry out particularly delicate work in this sensitive field.
4
POWER SOLUTIONS Made-to-measure power
customer info
Energies in synergy The Engineering Department is made up of close to 100 engineers and technicians and assists you in the development of your project, both from a technical and sales point of view. Each project follows a proven process, from the preliminary review, through to maintenance of the installation. A succession of pre-established steps, managed by all our teams, offers all the guarantees for flawless efficiency.
1. Preliminary review Consultation, analysis and feasibility... The definition of the customer's needs is ensured by the complementary areas of expertise that the SDMO teams possess, combined with a range of engineering tools such as the Sizing Program. If necessary, a project plan as well as an initial study and calculation notes can be implemented and added to the specifications.
2-Order Costing, proposal and validation ... Once the best solution has been determined based on energy needs, technical constraints and the financial resources available, the project is transferred to the relevant SDMO departments. This handover is carried out using a complete dossier containing all the technical and contractual data.
3-Study Planning, calculation and projection... The client's dedicated SDMO contact person sets up the project. Plans, diagrams, calculations, scheduling, technical documentation... everything is validated in complete transparency.
5
Factory/ Installation Deal supervisor
Dedicated contact person for the client, from allocation of the file until operational handover of the power plant/generating set(s). In cases where the installation is carried out by the client directly, SDMO offers supervision and advice, checks and commissioning startup.
POWER SOLUTIONS Made-to-measure power
4-Implementation Manufacturing, testing and delivery... The manufacturing of generating sets, containers, and command and control panels is carried out in line with the order. Equipment testing on test benches guarantees its reliability. Various additional services can be included by SDMO's Power Solutions teams for the client's peace of mind: packaging for delivery to the site, construction of stone or metal buildings, equipment installation, soundproofing, etc.
5. Commissioning Startup, initial testing and adjustments... During commissioning, an initial test is carried out in terms of the equipment unit's operation (mechanical and electrical) before on-load tests can guarantee completely safe operation. SDMO is able to offer its services throughout the world thanks to its solid network of skilled and responsive teams: technicians and technical inspectors work to support its sister company BES, along with distributors and partners who can perform these services in SDMO's name.
6-Maintenance Assistance, training and monitoring... Backed by an extensive network of approved agents, SDMO is able to ensure all its customers receive quick and efficient technical assistance. Command/control system, electrotechnical and mechanical innovations, every year the SDMO training unit shares its expertise on the subject of generating sets. Guaranteeing the longevity of its installations throughout the world, the Spare Parts department responds to requests as quickly as possible, offering over 40,000 numbered parts, including GenParts (SDMO brand).
6
TELECOMS
Solutions for everyone
Telecoms solutions flowchart
SDMO can provide solutions tailored to every situation, environment and budget.
network backup
Solution 1
ATS
Application
Solution 2
Solution 3
ATS
2 Generating sets
1 Generating set + batteries
1 Generating set + batteries + solar panels
all power ratings
all power ratings
power ratings from 0.5 to 5 kW
power ratings from 0.5 to 3 kW
a low CAPEX(2)
a low OPEX(3)
a very low OPEX(3) a long battery service life a reduction in the generating set's consumption and a maximum reduction in the running time (approximately generating set's consumption and running time 5 hours/day) (approximately 3 hours/day) a very quick return on a quick return on investment (around 1 year) investment (around 2 year) a very long maintenance a 1 maintenance interval (no more than 1 or 2 intervention per year interventions per year)
a long equipment service life
Advantages a easy to transport
Constraints
CONS
Solution 4
1 Generating set + network
a low CAPEX(2)
PROS
isolated sites
a easy to transport
a high OPEX(3)(1) a high OPEX(3) a use of the a use of the generating generating set at low set at low efficiency efficiency a high maintenance frequency
a high CAPEX(2)
a high CAPEX(2)
a batteries require replacement
a batteries require replacement
(1) based on network quality (2) CAPEX = capital expense (start-up investment) (3) OPEX = operational expense (operational costs)
7
telecoms
Solutions for everyone solution 1 solution 2
solution 1
Generating set + network
ATS
In this configuration, the installations are supplied directly by the electrical network. The generating set is therefore present as a safety measure. It takes over the electrical power supply in the event that the main network is cut off, using a normal/emergency switch (ATS).
solution 2
2 Generating sets (without network)
When there is no electrical network, the configuration represented by 2 generating sets coupled together provides a 24/7 power supply. The BTS (Base Transceiver Station) is supplied alternately by each of the generating sets using a supply changeover switch date and time system (ATS). Each set backs up the other during phases when it is not running.
8
ATS
telecoms
Solutions for everyone
solution 1 solution 2
K16
J30U covered version
Three phase
LONG RUNNING
MONTANA
ADRIATIC
Specifications 50 Hz - 230 V kVA Cos Φ 0.8 GENERATING Cons SETS ¾ PRP ESP (1) L/h (3) (4) K9 K12 K16 K21 J22 J33 J44K J66K J77K J88K J110K J130K LR8 LR12 LR16 LR22
8 11 15 19 20 30 40 60 70 80 100 118 7 11 15 20
9 12 16 21 22 33 44 66 77 88 110 130 8 12 17 22
2.0 2.5 3.7 4.6 5.0 5.0 7.5 12.0 12.0 14.0 16.5 18.5 1.5 2.2 2.9 3.7
Specifications 60 Hz - 240 V kWe GENERATING ISO 8528* Cons SETS ¾ PRP ESP (2) L/h (3) (4) K9U K12U K16U K20U J20U J30U J40U J60U J70U J80U J100U J120U LR8U LR12U LR16U LR22U
8 11 15 18 18 26 36 55 64 73 91 106 7 11 15 20
9 12 16 19 20 28 40 60 70 80 100 117 8 12 16 22
2.5 3.4 4.5 5.2 6.5 6.5 8.7 14.5 14.5 16.0 19.0 24.0 1.8 2.7 3.6 4.6
General specifications Engine
Alternator
Covered version (5)
Engine type
CC
CC (L)
Type
Enclosure
Dimensions lxwxh (m)
KDW1003 KDW1404 KDW1603 KDW2204 3029DF120 3029DF120 3029TF120 4045TF120 4045TF120 4045TF220 4045HF120 6068TF220 LPW2 LPW3 LPW4 LPW4T
3L 4L 3L 4L 3L 3L 3L 4L 4L 4L 4L 6L 2L 3L 4L 4L
1.0 1.4 1.7 2.2 2.9 2.9 2.9 4.5 4.5 4.5 4.5 6.7 0.9 1.4 1.9 1.9
ECP3-2S ECP3-1L ECP3-3L ECP28-1L ECO28-1L ECP28-VL ECO32-3S 432M45 432L8 432L8 442VS45 442S7 ECP3-2S ECP3-1L ECP3-3L ECP28-1L
M125 M126 M126 M126 M127 M127 M127 M128 M128 M128 M129 M226 M127 M127 M127 M127
1.48x0.76x1.03 1.75x0.78x1.23 1.75x0.78x1.23 1.75x0.78x1.23 2.08x0.96x1.42 2.08x0.96x1.42 2.08x0.96x1.42 2.30x1.06x1.68 2.30x1.06x1.68 2.30x1.06x1.68 2.55x1.15x1.68 3.51x1.20x1.83 2.08x0.96x1.42 2.08x0.96x1.42 2.08x0.96x1.42 2.08x0.96x1.42
Weight (Kg) 50/60 Hz 400 510 580 650 980/930 980 1040 1410 1530 1530 1640 2160 620 680 790 830
Tank (L) 50 50 50 50 100 100 100 180 180 180 190 340 -
Single phase
LONG RUNNING MONTANA ADRIATIC
Specifications 50 Hz - 230 V kVA GENERATING Cons Cos Φ 0.8 SETS ¾ PRP ESP (1) L/h (3) (4) K10M K13M K17M LR6M LR10M LR14M LR17M
9 12 15 6 9 12 16
10 13 16 6 10 14 17
2.5 3.7 4.6 1.5 2.2 2.9 3.7
Specifications 60 Hz - 240 V kWe GENERATING ISO 8528* Cons SETS ¾ PRP ESP (2) L/h (3) (4) K9UM K12UM K16UM K20UM J20UM J30UM J40UM J70UM LR8UM LR12UM LR16UM LR21UM
(1) Also available in the following voltages: 415/240 V - 380/220 V - 220/127 V - 200/115 V (2) Also available in the following voltages: 440/254 V - 220/127 V - 208/120 V (3) ISO 8528: powers specified in compliance with the legislation in force (4) The dimensions and weights apply to a generating set specified in the price list, without options
8 10 14 18 18 26 36 61 8 11 15 19
9 12 16 19 20 28 40 67 8 12 16 21
2.5 3.3 4.5 5.2 6.5 6.5 8.7 14.5 1.8 2.7 3.6 4.6
General specifications Engine
Alternator
Covered version (5)
Engine type
CC
CC (L)
Type
Enclosure
Dimensions lxwxh (m)
Weight (kg)
Tank (L)
KDW1003 KDW1404 KDW1603 KDW2204 3029DF120 3029DF120 3029TF120 4045TF120 LPW2 LPW3 LPW4 LPW4T
3L 4L 3L 4L 3L 3L 3L 4L 2L 3L 4L 4L
1.0 1.4 1.6 2.2 2.9 2.9 2.9 4.5 0.9 1.4 1.9 1.9
ECP3-1L ECP3-3L ECP28-1L ECP28-VL ECP28-VL ECO32-3S 432M45 442VS45 ECP3-1L ECP3-3L ECP28-1L ECP28-VL
M126 M126 M126 M127 M127 M127 M127 M129 M127 M127 M127 M127
1.75x0.78x1.23 1.75x0.78x1.23 1.75x0.78x1.23 2.08x0.96x1.42 2.08x0.96x1.42 2.08x0.96x1.42 2.08x0.96x1.42 2.55x1.15x1.68 2.08x0.96x1.42 2.08x0.96x1.42 2.08x0.96x1.42 2.08x0.96x1.42
290 350 420 520 980 1020 1090 1630 620 680 790 830
50 50 50 100 100 100 100 190 -
(5) PRP: main power available continuously with variable load for an unlimited time in accordance with ISO 8528-1. (6) ESP: Emergency Standby Power available for supplying emergency power in variable load applications in accordance with ISO 8528-1, no overload available for this service. (7) Dry weight - without fuel
9
POWER products Long Running Details
"Long running" operation This system means a service only has to be carried out every 2000 hours (compared to 250 hours with a standard motor), which gives an eightfold reduction in the maintenance frequency, leading to a significant reduction in operating costs (OPEX2). "Long running" generating sets are particularly wellsuited to isolated telecoms sites, and are equipped with Lister Peter engines. Their low consumption guarantees significant savings on fuel. This saving can exceed 20% compared to the main engine manufacturers on the market.
CAPEX1 OPEX2
Conventional generating set
Long Running generating set
(1) CAPEX = capital expense (start-up investment) (2) OPEX = operational expense (operational costs)
Theft protection for fuel tanks To reduce the footprint and prevent any risk of fuel theft on-site, SDMO has developed three standard 600, 1000 and 2000 litre tanks, specially designed to be secured underneath SDMO generating sets, providing much appreciated autonomy. Siphoning protection
Dimensions Enclosure M127
Excluding With With With tank 600 L 1000 L 2000 L lxwxh (m) tank tank tank 2.08x0.96x1.42 2.08x0.96x1.91 2.35x0.96x2.08 3.51x1.15x2.11
Filling protection The gauge is visible but access to filling is not possible.
Drainage protection No access is possible, nor unscrewing for drop by drop.
Different safety systems restrict access to filling, making siphoning impossible. This equipment, specially developed by SDMO for Telecoms applications, improves the profitability of investments, giving a significant reduction in operating costs (OPEX).
10
POWER products Control units
product plus points
Source inverters - VERSO From 35A to 160A, the VERSO is the SDMO changeover switch. Available in three phase and single phase versions, it integrates power detection and allows automatic/manual start-up of the generating set in the event of a mains power cut.
IP54 control unit Ratings Type Nominal voltage/frequency Display and setting Voltage drop tolerated Protects against a change in the phase rotation direction Protection in "0" position Lightning arrester Confirmation of mains return EJP (for France only) Protection index Dimensions (l x w x h) in mm
Potentiometer 20% of the nominal voltage @230V
VERSO S Three phase 80A 100A 125A Three phase 127 / 230 V / 50-60Hz 230 / 400 V / 50-60Hz Potentiometer 20% of the nominal voltage @400V
X
O
a
X X a a IP54 305x410x150
X X a a IP31 385x385x193
Rapid automatic protection available for D versions O a a IP54 400x600x200
63A
VERSO S Single phase 100A 125A 160A Single phase 230V / 50-60Hz
35A
63A
160A
35A
VERSO D 80A 100A 125A Three phase 127 / 230 V / 50-60Hz 230 / 400 V / 50-60Hz Via LCD display 30% of the nominal voltage @400V 63A
Depending on your needs and your technical constraints, SDMO can offer a range of different source inverter models. To improve their robustness under extreme conditions, some options are also available on some models.
Changeover cabinet
ATS
For sites equipped with two generating sets coupled together (solution 2), SDMO recommends a changeover cabinet designed to easily manage the alternate operation of the generating sets. A timer system allows the running time to be split between the generating sets. So, in the event of a fault with one set, the other will immediately take over operation to ensure a continuous supply of power.
Remote management
SDMO offers a range of solutions for remotely monitoring and managing the generating set. This allows you to monitor your bank of generating sets from your office. These solutions enable you to set up reports, optimise your trips and thereby reduce your operational costs.
11
160A
TELECOMS Solutions for everyone
1,0 > 1,9
2,0 > 2,9
3,0 > 3,9
4,0 > 4,9
5,0 > 5,9
6,0 > 6,9
7,0 > 7,9
kWh/m²/d.
Naturally controlled solutions
The depletion over the medium term of petroleum resources and the constant increase in energy demands highlight an economic reality of which SDMO is fully aware. By putting in place solutions which combine the various energy sources (generating set, battery, photovoltaics, etc.), and which can be configured across its ranges of products, SDMO gives you the opportunity to invest today in sustainable technology, at manageable running costs and with a reduced impact on the environment.
An intelligent telecoms solution to power your BTS directly (800 to 5000 W)
As a response to the development in telecoms in remote and inaccessible areas, SDMO is offering turnkey solutions which can be set up quickly to provide a site with reliable power 24/7. These solutions use local sources of energy, thus limiting maintenance interventions and reducing fuel consumption by up to 80% for a return on investment in under 2 years. The SDMO hybrid solution is flexible, optimised for the individual conditions of each site and the capacity required. Researched and industrialised by energy professionals, this meets the most rigourous demands on the market.
TURNKEY SYSTEMS FOR RAPID DEPLOYMENT IN LARGE NUMBERS
Each SDMO hybrid system is assembled, configured and tested in the factory so it can be quickly connected to your telecoms equipment. It comes as a complete package: • SDMO generating set • AC/DC rectifiers • storage batteries • fuel tank • power source control cabinet
The whole cycle is fully managed:
- optimisation of the generating set's running time to optimally limit fuel consumption - optimal switching of batteries in order to extend their service life, in particular using regular equalisation charges. This reduces the CAPEX and OPEX as much as possible.
12
telecoms solution 3
Generating set + batteries These systems allow the energy produced by the generating set to be stored. They reduce fuel consumption and the number of hours the generating set has to run, thereby reducing the number of maintenance operations and fuel tank refills to one or two per year. The OPEX (operational expenses) can be considerably reduced. As a consequence, the return on investment is very quick.
Depending on the sizing required and the constraints of the project, the size of the container can be adapted. (Example: 10 foot container).
Advantages:
• turnkey solution • easy to install • quick deployment • reduction in the running time of the generating set and consequently, the fuel consumption
13
telecoms solution 4
Generating set + batteries + solar panels These systems allows the generating set's power to be saved and to have an additional intake of solar power. This means the number of hours the generating set has to run is reduced as much as possible and the battery life cycles are extended. With an equivalent system and load, the battery unit will therefore have a longer service life and consumption will be lower for the generating set.
Depending on the sizing required and the constraints of the project, the size of the container can be adapted. (Example: 10 foot container).
Advantages:
• turnkey solution • easy to install • quick deployment • optimum reduction in the running time of the generating set and consequently, the fuel consumption • extended battery service life
14
TELECOMS Monitoring
Smart Energy Center (SEC) In the form of a case or cabinet, the SMART ENERGY CENTER provides a complete turnkey solution for managing energy resources for telecom operators. It combines existing SDMO tools with new system which enable alternative energy sources to be governed. The standard SEC is fitted to our telecoms energy stations. It manages the supply cycle for energy from the various sources and ensures continuity of operation 24/7. The main components of this modular cabinet are as follows: - an external AC power supply: the generating set - an external DC power supply: the solar panels (optional) - a battery cycle control unit which communicates with the generating set control unit - rectifiers for transforming alternating current to direct current - the distribution equipment required for the various energy outputs The SEC is preconfigured in the factory to guarantee you the best results for your installation.
Fuel Tank Generating set Energy
Batteries
Auxiliaries
Solar panels (2)
(1) BTS: Base Station Transceiver (2) Option
BTS(1) without network connection
Simplified description of the operation: 1. The batteries are used to cover the energy requirements 2. The batteries reach a low charge level => The generating set starts up 3. The generating set supplies the charge while recharging the batteries until the recommended charging level is reached 4. Once the batteries are recharged, the generating set stops 5. On a regular basis, the system triggers equalisation charges 6. As an option, solar panels (solution 4) supply the charge and recharge the batteries as soon as the solar energy produced is sufficient.
Air conditioning (2)
Communication
Communication is provided by an alarm report unit using dry contacts.
As standard, 7 alarm reports are available on terminals (generating set faults, low fuel level, battery, customer charge, solar charge controller, Smartpack, rectifiers). For a more in-depth analysis of operation by recovering the data recorded by the battery monitor, an Ethernet connection and a USB port are available on the front panel; it is also possible to log in to the battery monitor website. Modbus communication is available as an option.
15
OPTION DETAILS Upgrade Version of the Smart Energy Center
In addition to dry contacts, Modbus communication is available on terminals inside the Smart Energy Center. The Upgrade version also allows connection to the Smart Pack website and remote recovery of data, sent by SMS.
TELECOMS Example
Input data Geographical
Technical input data
Additional data
General description of the required hybrid system
Solar data
Country City Latitude °N Longitude °E Average outdoor temperature (°C) Altitude of the site (m) Type of installation With solar panels No. of operating hours (h/day) Service life of batteries (h) Maximum power to be supplied (W) Average power to be supplied (W) Energy output voltage (V) Frequency of the generating set (Hz) No. of generating set phases Fuel tank volume (L) Optimum angle of inclination (°) Daily hours of sunlight within range of the panels (kWh/m²/j)
Mali Bamako 12.67 -7.98 35 396 Indoor Yes 24 35 1500 1200 48 50 3 (three phase) 1000 15 5.9
Results and analysis of the different hybrid solutions SOLUTION 2
Description of the scenario
Solution 2
CAPEX
Batteries
Financial
Photovoltaic modules
Technical
Generating set
OPEX
Type of installation Scenario options Space requirements Cost of investment from the start of the proposed solution Annual operating cost for the proposed solution Annual no. of operating hours (h/year) Average no. of operating hours (h/day) No. of scheduled annual maintenance operations Fuel consumption (L/year) No. of fuel tank fills scheduled per year Estimated service life of the generating set (years) Time to arrive on site in the event of a fault with the generating set (hours) Estimated service life of the batteries (years)
Long Running
conventional installation conventional installation 2 K16 generating sets at 2 LR16 (Long Running) an isolated site generating sets at an isolated site
Solution 3
Solution 4
HPG 22-1200 with Long Running generating set
HPG 22-1200-3.52 with Long Running generating set
2 M126 enclosures
2 M126 enclosures
1 10 foot container
Solar 1 10 foot container
Base 100
115
271
364
Base 100 4,383 24 18 22,792 23 3
67 4,383 24 3 19,710 20 3
22 1,695 5 1 5,866 6 9
13 996 3 1 3,447 3 15
-
-
18
18
-
-
4
6
Optimum angle of inclination (°)
-
-
-
15
Solar energy produced (kWh/year)
-
-
-
5,689
Base 100 Base 100 Base 100 210,384 Base 100
75 73 72 210,384 72
53 45 37 210,384 17 37
49 37 28 210,384 24 28
Total cost over 5 years Total cost over 10 years Total cost over 20 years Total energy consumed over 20 years (kWh) Return on investment time (months) Cost of energy
HPG 22-1200-3.52 Hybrid Power Generator
16
kVA
Ah
kWc
telecoms Example
Energy intake and operating rates SOLUTION 2
Solution 2
Solution 3
Long Running
Solution 4
Energy intake
40%
% fossil fuel 100%
% solar power
100%
60%
100%
Operating rate Generating set
19%
11%
Batteries 100%
Solar
81%
100%
48%
40%
advantages of HYBRID SOLUTIONS:
• 80% reduction in OPEX • 90% reduction in generating set running time • a single annual maintenance operation • 3 tank refills per year • return in investment in less than 2 years
Combined annual costs 2000
1500 ion
lut
So
1000
n2
tio
u Sol
) sets ting a r e gen K16 2 (2
g nin
s) g set ratin e n e 16 g (2 LR
un gR Lon
set) enerating unning g R g n Lo h 00 wit PG 22-12 ON 3 (H
SOLUTI
500
SOLUTION 4 (HPG 22-1200-3.52 with Long Running generating set) years
100 0
1
2
3
4
5
6
start-up cost included in year 0 Base 100 = reference scenario
17
7
8
9
10
WEST
SDMO BREST Tel. 02 98 41 13 48 - Fax 02 98 41 13 57
CENTRAL WEST
SDMO CHOLET Tel. 02 41 75 96 70 - Fax 02 41 75 96 71
PARIS/NORTHERN NORMANDY SDMO Gennevilliers Tel. 01 41 88 38 00 - Fax 01 41 88 38 37
EAST
SDMO Metz Tel. 03 87 37 88 50 - Fax 03 87 37 88 59
SOUTH EAST
SDMO Valence Tel. 04 75 81 31 00 - Fax 04 75 81 31 10 SDMO Aix Tel. 04 42 52 51 60 - Fax 04 42 52 51 61
ARGENTINA
SDMO ARGENTINA S.A. Tel. +54 11 48 36 35 11 - Fax +54 14 48 36 35 16
BELGIUM
SDMO NV/SA Tel. +32 36 46 04 15 - Fax +32 36 46 06 25
BRAZIL
SDMO DO BRASIL Tel. +55 (11)43 90 84 34 - Fax +55 (11)43 90 84 34
SPAIN
SDMO INDUSTRIES IBERICA Tel.+34 (9)35 86 34 00 - Fax +34 (9) 35 80 31 36
US
SDMO GENERATING SETS Tel. +1 30 58 63 00 12 - Fax +1 30 58 63 97 81
UK
SDMO ENERGY Ltd TEL. +44(0) 1606 838 120 - FAX +44(0) 1606 837 863
NIGERIA
SDMO LAGOS Tel. +234(0) 80 56 66 64 44 - Fax +33 (0)1 72 27 55 62
GERMANY
SDMO GmbH Tel. +49(0)63 32 97 15 0 - Fax +49(0) 63 32 97 15 11
Offices SOUTH AFRICA
SDMO JOHANNESBURG Tel. +27 (0) 8 32 33 55 61 - Fax +33 (0) 1 72 27 61 51
ALGERIA
SDMO ALGER Tel. +213 (0) 21 68 12 12 - Fax +213 21 68 14 14
DUBAI
SDMO MIDDLE EAST Tel. +971 50 51 496 83 - Fax +33 1 72 27 55 52
RUSSIA
SDMO MOSCOW Tel.+7 495 665 16 98 - Fax +33 (0)1 72 27 55 48
SDMO Industries - 12 bis rue de la villeneuve CS 92 848 - 29 228 Brest Cedex 2 - France Tel. +33 (0)2 98 41 41 41 - Fax +33 (0)2 98 41 63 07 www.sdmo.com
6230-02.12.L
TEL-IN-DO-US-21 - English
SOUTH WEST
SDMO Toulouse Tel. 05 61 24 75 75 - Fax 05 61 24 75 79
Subsidiaries
SDMO is a registered trademark of SDMO Industries. Non-contractual document - In accordance with our product quality improvement policy, SDMO Industries reserves the right to modify, without prior notice, any specifications published in this catalogue. Photo credit: SDMO - Guillaume Team
French Offices