IMPACT OF OUT-OF-OFFICE WORK OPPORTUNITIES AND SPAIN'S PREFERRED CLIMATE EXPECTED TO RESULT IN FURTHER GAINS

However, long-range population predictions continue to call for a contraction, as Spain's population growth in 2022 is estimated to be 0.13%.

The Spanish tissue manufacturing business was last reviewed in this column a little over two years ago. We noted that Spain had signifcantly recovered from the 2009 recession by 2019. However, when the population peaked in 2012, the United Nations population division forecasted continued shrinkage due to the low birth rate. Since then, the global Covid-19 pandemic has upset the global economy and supply chains, followed by President Putin’s invasion of Ukraine.

Population growth and the economy are fundamental drivers of tissue consumption in a very mature market – hence the negative impact it has received due to recent events.

Spain's population growth in 2022 is estimated to be 0.13% by the World Factbook. The current birth rate of 7.13 births per 100,000 population is ofset by a death rate of 10.22 deaths per 100,000. However, the population growth comes from a net positive migration rate of 4.35 immigrants per 100,000. This trend in population is shown in Figure 1.

The country’s population hit a low point in 2015-2016, before resuming growth in 2017. It’s interesting to note that immigration to Spain's sunny climate appears to have expanded with the pandemic and increased remote working. However, long-range population predictions continue to call for a contraction.

Figure 1 also shows the efect of the pandemic on the country’s economy as a dip in GDP per person occurred in 2020-2021, with growth resuming in 2022. Overall GDP growth was 1.95% in 2019. Together, the factors shown in Figure 1 should result in increased total tissue demand.

Tissue demand is also driven by consumers' expectations of their economic security. Figure 2 shows the trends of infation and unemployment on consumer sentiment. Infation was as low as 0.7% until the global pandemic disrupted supply chains and war upset energy supplies. Unemployment has continued to improve since 2013, dropping from 26% to 13%. Considering the global environment, these numbers do not look like unusual drags on tissue consumption.

Tissue imports and exports are in rough balance, as shown in Figures 3 and 4. Tissue trade represents less than 20% of Spain's tissue capacity. Tissue imports are sourced from France, Germany, Italy, and Portugal, as these are Spain's immediate neighbours and each of these countries possesses advanced process tissue capacity capable of high absorbent capacity towels, unlike Spain.

POPULATION GROWTH AND THE ECONOMY ARE DRIVERS OF TISSUE CONSUMPTION IN A VERY MATURE MARKET – HENCE THE NEGATIVE IMPACT IT HAS RECEIVED DUE TO RECENT EVENTS. SPAIN'S POPULATION GROWTH IN 2022 IS ESTIMATED TO BE 0.13% BY THE WORLD FACTBOOK. THE CURRENT BIRTH RATE OF 7.13 BIRTHS PER 100,000 POPULATION IS OFFSET BY A DEATH RATE OF 10.22 DEATHS PER 100,000.

The same tissue import sources are also export customers. Belgium, Poland, and the United Kingdom are also tissue customers, as shown in Figure 4. The long-term balance in tissue trade indicates that Spanish tissue producers are focused on the domestic tissue demand rate for managing capacity.

The focus on domestic demand results in a cautious approach to adding new capacity, as shown in Figure 5. This trend plots the number of tissue machines added or removed from Spain’s feet. New machines in 2007, 2012, 2014, and 2018 are balanced by shutdowns as the new tissue machines come up to speed. The net result is a slow increase in domestic tissue capacity as larger, faster, and newer machines replace older and smaller tissue production lines.

Spanish tissue production sites are chiefy based on baled market pulp as shown in Figure 6. Less than 20% of tissue mills have integrated recycled fbre plants, but not all of these plants supply 100% of the site's fbre needs.

Half of Spain's tissue fbre source is market eucalyptus pulp, as seen in Figure 7. This is balanced by southern softwood with smaller amounts of northern softwood and hardwood. This furnish provides preferred consumer properties but subjects the producers to the volatility of the global pulp market.

Figure 8 shows the fnished tissue products produced. Consumer bath, facial and towel grades represent about four-ffths of the production volume and further explain the market pulp choices.

A comparison set of Spanish tissue producers was chosen based on trade data and location. Turkey was added to the group to compare with a country focused on growing tissue exports.

Figure 9 compares the average quality of each country's tissue machines. The bubbles' relative size represents each country's total tissue capacity. The average technical age is shown on the X-axis. Technical age is based on the age of each tissue machine modifed by the upgrades and rebuilds of the tissue line equipment to improve productivity and product quality. The Y-axis shows the width of the paper machine trim. Trim width is a signifcant factor in each machine's ultimate production rate capability. Narrower machines tend to use the same size crew as a wider machine, but narrow machines have more signifcant edge efects for energy and sheet wastes. Machine speed is an alternative indicator to sheet width but is easier to improve after the machine is constructed. Turkey has the newest and widest tissue feet followed by Spain, Portugal, and Italy. On average, Spanish machines are in a good position except for the lack of advanced tissue technology seen in neighbouring countries.

The same comparison set is used in Figure 10 to benchmark the average production cash cost for each country. The width of each country’s bar represents the relative size of production. Spain is in a good cost position with only Portugal having lower costs. It’s important to note however that Portugal has a much larger amount of integrated fbre and lower market pulp costs than Spain. This explains a lot of the cost diferences seen in the Iberian Peninsula. Italy and France are very similar to Spain. Germany has higher energy costs but tends to use more low-cost recycled fbre. Higher energy costs in the United Kingdom and Turkey push these countries to a high-cost position on average.

Production costs only provide a snapshot of the industry viability over time and can be misleading in times of economic disruption. Figure 11 provides a view of the next fve years using Fisher’s Viability Index, which was used to combine cost position and asset age with additional competitive factors. Portugal and Spain also lead the comparison set in this metric as well. However, Turkey moved to a number three position, partly due to its new machines.

Figures 12 and 13 take a deeper dive into the energy efects on a country’s competitive position. Figure 12 is the cost of energy per ton of tissue production for each country. The bars are coloured to indicate on-site production energy from fuels and electricity purchases. France, Portugal, and Spain are currently in a low-cost energy position. However, it’s important to keep in mind that this is a snapshot of the current energy supply disruption, and it may need to be revisited in a few years.

PRODUCTION COSTS ONLY PROVIDE A SNAPSHOT OF THE INDUSTRY VIABILITY OVER TIME AND CAN BE MISLEADING IN TIMES OF ECONOMIC DISRUPTION.

FIGURE 11 PROVIDES A VIEW OF THE NEXT FIVE YEARS USING FISHER’S VIABILITY INDEX, WHICH WAS USED TO COMBINE COST POSITION AND ASSET AGE WITH ADDITIONAL COMPETITIVE FACTORS. PORTUGAL AND SPAIN ALSO LEAD THE COMPARISON SET IN THIS METRIC AS WELL. HOWEVER, TURKEY MOVED TO A NUMBER THREE POSITION, PARTLY DUE TO ITS NEW MACHINES.

Figure 13 shows the same energy consumption rate, but energy units, or GJ, are substituted for the cost to get a comparison independent of current energy pricing in each country. Spain retains its favourable position, but Turkey moves from last to frst in energy consumption. Some diferences refect the efciencies of the sites, but others can be explained by the grades produced and the technology used.

Figure 14 shows the average scope 1 and 2 carbon emissions per ton of production, representing the same energy consumption in Figures 12 and 13. France leads with the lowest carbon emissions due to the nuclear electric grid, but Spain comes in at second place. Turkey and Germany have signifcant coal energy inputs that drive emissions higher and places them as some of the larger emitters of this comparison set.

This analysis looks at a snapshot of Spain and western European tissue-making based on country averages in an extraordinary time of energy price shocks and supply chain disruption. This crisis will pass eventually, but it is unclear when or how the tissue business across Europe will adapt.

Spain's domestic tissue production capacity continues to be in good shape. Imports and exports remain in balance and capacity additions continue to be measured to replace older and higher-cost tissue machines without oversupplying the market. The country depends on market pulp imports but has maintained a good cost position relative to its peers. Also, its carbon emissions are lower compared to the rest of the competitive set, except for France.

Population growth has resumed, but the long-term population is still expected to contract slowly. Consumer purchasing power has grown recently. The impact of out-of-ofce work opportunities and Spain's preferred climate may result in further immigration gains, but this is unlikely to ofset the low birth rates completely.

Analysis of competitive position requires specifcs on tissue producers and individual machines. This article presents a static picture summary of Spain's tissue industry today. Fibre prices, exchange rates, and environmental regulations will change, providing some participants with advantages and others with new challenges.

Spanish tissue mills will continue to change hands and perhaps consolidate; neighbouring countries may invest in tissue-making capacity, thus afecting the country’s imports and exports.