TR P
ITAN IGGING RODUCTS
Twin-Path® Mine Tow Straps Equipment recovery in surface www.titansupply.ca mining operations has become much easier with the introduction of the Titan Supply High Performance Fiber, Twin Path® Tow Straps with CornerMax™ Sleeves. Extremely strong and light weight, the high modulus, low elongation, K-Spec® fiber does not store energy to the same degree as other materials like wire and chain. Subsequently, Twin-Path® Tow Straps do not dissipate stored energy and have very little, if any, whiplash effect at failure. There light weight feature means quicker recovery reducing down time and manpower requirements. These Tow Straps include two CornerMax™ Sleeves with Dyneema® Fiber for protection at the connection points.
Reduced labor cost Improved productivity Eliminated damage from slings Improved personnel safety Durability Easy to use
Part #
Description
797BTPTS85000
Twin Path Tow Strap with K-Spec and Dyneema Sleeve
Work Load Limit
Break Strength
Width (in.) Weight (lbs/ft)
85,000 lbs
425,000 lbs
6
1.85
797BTPTS100000 Twin Path Tow Strap with K-Spec and Dyneema Sleeve
100,000 lbs
500,000 lbs
6
2.20
797BTPTS150000 Twin Path Tow Strap with K-Spec and Dyneema Sleeve
150,000 lbs
750,000 lbs
8
3.36
**Other sizes available upon request.
www.titansupply.ca
TR P
ITAN IGGING RODUCTS
CornerMax™ Sleeves with Dyneema® Fiber
www.titansupply.ca
The CornerMax™ Sleeve is the latest in rigging solutions from SLINGMAX® Solutions and Titan Supply LP. The CornerMax™ Sleeve is the ideal solution to protect synthetic slings from cutting when it is not practical to use a CornerMax™ Pad, whether due to curvature of the load edge or repetitive uses such as unloading steel coils. Independent field and laboratory testing has shown the CornerMax™ Sleeve to be extremely cut resistant. The CornerMax™ Sleeve is made with Dyneema® Fiber and is proven tough. Sleeve designed to protect up to 25,000 lbs per inch of sling width. The true benefits of this revolutionary material far outweigh the costs and now provide for the use of synthetic slings in applications previously dominated by heavy chain, mesh and wire rope slings.
K-Spec Core Yarn K-Spec core yarn strength retention is based on test results of components at 65°C/150°F (or less) for 6 months. K-Spec has a 100% strength retention when exposed to: Age, 10% detergent solution, rot and mildew, sunlight and Toluene; 99% strength retention when exposed to: acetic acid, gasoline, hydrochloric acid 1m, hydraulic fluid, kerosene, and sea water; 98% retention when exposed to: 25% ammonium hydroxide, 10% hypophosphite solution, and 40% phosphoric acid; 97% retention when exposed to 5m sodium hydroxide; 95% retention when exposed to Portland cement and sulfuric acid; and 88% retention when exposed to Clorox®;and nitric acid.
For Inquiries
Please contact your local sales representative: Edmonton 780-481-1122
Calgary 403-236-1262
Red Deer 403-340-3620
Grande Prairie 780-539-7316