TR P
ITAN IGGING RODUCTS
Rigging Products CATALOGUE
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Rigging Products Wire Rope Slings Tuff-Lift® Wire Rope Slings ..................................................................................................... 1 Standard Options .................................................................................................................... 1 Two Three & Four Leg Bridle .................................................................................................. 2 Gator-Flex®, Gator-Flex® Grommets ..................................................................................... 3 TM Tri-Flex®, T&D Ultra-Flex ..................................................................................................... 4 Gator-Laid®, Gator-Max® ....................................................................................................... 5 Web Slings Tuff-Lift® Web Slings ............................................................................................................... 6 Tuff-Lift® Diamond Edge Slings .............................................................................................. 6 Round Slings Tuff-Lift® Round Slings ............................................................................................................ 7 Twin-Path® Slings .................................................................................................................... 8 Check-Fast® Inspection System .............................................................................................. 8 Sling Protection Synthetic Sling Protection ........................................................................................................ 9 Abrasion Protection .................................................................................................................. 9 Chain Slings Tuff-Lift® Chain Slings .............................................................................................................. 10 GrabIQ Chain Slings ................................................................................................................. 11 Shackles Screw Pin, Alloy Screw Pin ....................................................................................................... 12 Bolt Type Anchor ....................................................................................................................... 13 Wide Body ................................................................................................................................. 14 Hardware .............................................................................................................................................. 15 Hoisting Equipment Lever Hoists ............................................................................................................................... 16 Chain Hoists ............................................................................................................................... 17 Beam Clamps ............................................................................................................................. 18 Crosby IP Beam Clamps .......................................................................................................... 19 Plate Clamps .............................................................................................................................. 20 Horizontal Lifting Clamps ........................................................................................................... 21 Beam Trolleys ............................................................................................................................ 22 Spreader & Lifting Beams .......................................................................................................... 23 Tirfors & Schaefer Comealongs ................................................................................................. 24 Blocks & Sheaves ................................................................................................................................. 25 Permanent Lift Magnets ....................................................................................................................... 25 Winches ............................................................................................................................................... 25 Technical Data Sling Information ........................................................................................................................ 26 Removal Criteria ........................................................................................................................ 27 Rigging Services Mobile Test Bed, Inspection Service, RFID ............................................................................... 28 Training & Seminars, Resource Materials ................................................................................. 29
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Rigging Products Tuff-Lift Wire Rope Slings 速
All wire rope used meets API specifications Flemish splice high efficiency eyes XIP strength increases capacity Customized to specifications Manufactured in accordance with ASME B30.9 standards All Titan Supply slings are manufactured using Crosby sleeves
! WARNING See wire rope technical data page for inspection & removal criteria
APPROX. WEIGHT BASKET (lbs./ft.) 2600 0.1 4000 0.2 5600 0.3 7600 0.4 10000 0.5 12800 0.6 15600 0.8 22400 1.1 30400 1.5 39200 1.9 48000 2.5 60000 3.0 72000 3.7 84000 4.4 96000 5.0 112000 5.7
WIRE STD. EYE XIP ROPE SIZE VERTICAL CHOKER SIZE (in.) (in.) 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 3 1/8 3 1/4 3 3/8 3 1/2 3 3/4 4
32 36 36 40 40 44 44 48 48 64 64 72 72 80 90
Thimble Eye Safety Hook
Thimble Eye Sling Hook
Thimble Eye Ring
Thimble Eye
Standard Eye
55500 60000 66000 73500 81000 90000 97500 106500 115500 123000 133500 142500 153000 172500 195000
148000 160000 176000 196000 216000 240000 260000 284000 308000 328000 356000 380000 480000 460000 520000
7.4 8.4 9.4 11.6 14.0 14.6 15.3 15.9 16.6 18.1 19.5 21.1 22.7 25.2 28.9
5:1 Design Factor Working Load Limit in Pounds
Standard Options
WWW.TITANSUPPLY.CA
74000 80000 88000 98000 108000 120000 130000 142000 154000 164000 178000 190000 204000 230000 260000
BASKET
APPROX. WEIGHT (lbs./ft.)
Safety Splice
STD. EYE XIP SIZE VERTICAL CHOKER (in.) 4 1300 975 6 2000 1500 6 2800 2100 8 3800 2850 8 5000 3750 10 6400 4800 10 7800 5850 12 11200 8400 14 15200 11400 16 19600 14700 18 24000 18000 20 30000 22500 22 36000 27000 24 42000 31500 26 48000 36000 28 56000 42000
Hand Splice
WIRE ROPE SIZE (in.) 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4
1
a.
Rigging Products Wire Rope Slings
Rope Dia.
2 Leg Bridle Wire Rope Sling
Capacities (tons) (Angle to Horizontal)
Alloy Oblong Master Link
Eye Hook (tons)
Minimum Sling Length
60°
45°
30°
Dia.
1/4
1.1
0.92
0.65
1/2
3/4-A
1'3"
3/8
2.5
2
1.4
1/2
1-1/2-A
1'8"
1/2
1/2
4.4
3.6
2.5
3/4
3-A
2'
5/8
5/8
6.8
5.5
3.9
1
5-A
2'4"
3/4
3/4
9.7
7.9
5.6
1
7-A
2'9"
7/8
7/8
13
11
7.6
1-1/4
11-A
3'3"
1
1
17
14
9.8
1-1/2
11-A
3'6"
1-1/8
1-1/8
21
17
12
1-1/2
15-A
4'
1-1/4
1-1/4
26
21
15
1-3/4
15-A
4'6"
1-3/8
1-3/8
31
25
18
1-3/4
22-A
5'
1-1/2
1-1/2
37
30
21
2
22-A
5'6"
1-3/4
1-3/4
49
40
28
2-1/4
30-A
6'6"
2
63
52
37
2-1/2
37-A
8'
2-1/4
77
63
44
2-3/4
45-A
8'9"
2 2-1/4
*C onstructed of 6x19 or 6x36 XIP IWRC Wire Rope
Rope Dia.
Capacities in (tons) Rope Dia. (Angle to Horizontal) 60°
45°
1/4
1.7
3/8
3.7
1/2
Alloy Oblong Master Link
Eye Hook (tons)
Minimum Sling Length
Dia.
1.4
30° 1/4 0.97
1/2
3/4-A
1'3"
3
3/8 2.2
3/4
1-1/2-A
1'8"
6.6
5.4
1/2 3.8
1
3-A
2'
5/8
10
8.3
5/8 5.9
1-1/4
5-A
2'4"
3/4
15
12
3/4 8.4
1-1/4
7-A
2'9"
7/8
20
16
7/8 11
1-1/2
11-A
3'3"
1
26
21
1 15
1-3/4
11-A
3'6"
1-1/8
31
26
1-1/8 18
1-3/4
15-A
4'
1-1/4
38
31
1-1/4 22
2
15-A
4'6"
1-3/8
46
38
1-3/8 27
2
22-A
5'
1-1/2
55
45
1-1/2 32
2-1/4
22-A
5'6"
1-3/4
74
60
1-3/4 42
2-3/4
30-A
6'6"
95
78
2 55
3-1/4
37-A
8'
116
94
2-1/4 67
3-3/4
45-A
8'9"
2 2-1/4
3 Leg Bridle Wire Rope Sling
*C onstructed of 6x19 or 6x36 XIP IWRC Wire Rope
4 Leg Bridle Wire Rope Sling
Rope Dia.
Capacities (tons) (Angle to Horizontal)
Alloy Oblong Master Link
Eye Hook (tons)
Minimum Sling Length
60°
45°
30°
Dia.
1/4
1/4
2.2
1.8
1.3
3/4
3/4A
1'3"
3/8
3/8
5
4.1
2.9
3/4
1-1/2A
1'8"
1/2
1/2
8.8
7.1
5.1
1
3-A
2'
5/8
5/8
14
11
7.8
1-1/4
5-A
2'4"
3/4
3/4
19
16
11
1-1/2
7-A
2'9"
7/8
7/8
26
21
15
1-3/4
11-A
3'3"
1
1
34
28
20
2
11-A
3'6"
1-1/8
1-1/8
42
34
24
2
15-A
4'
1-1/4
1-1/4
51
42
30
2-1/4
15-A
4'6"
1-3/8
1-3/8
62
50
36
(Pear Link) 2-3/4
22-A
5'
1-1/2
1-1/2
73
60
42
(Pear Link) 2-3/4
22-A
5'6"
1-3/4
1-3/4
98
80
57
(Pear Link) 2-3/4
30-A
6'6"
2
2
127
104
73
(Pear Link) 3-1/4
37-A
8'
*C onstructed of 6x19 or 6x36 XIP IWRC Wire Rope
! WARNING 2
Rated capacities for 3& 4 leg bridles assume a balanced load with weight equally distributed among each of the legs. In practice, this may not occur and one or more legs may carry a disproportionate share of the load. If this condition is likely to occur, a larger sling diameter may be required.
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Rigging Products Gator-Flex Slings 速
This sling has a nine-part body style with wires in the eyes that are crossed or interwoven so no wrapping is necessary. The sling was developed in conjunction with offshore oil company riggers who preferred a sling for heavy lifts that could be visually inspected and have the highest flexibility possible in a multi-part wire rope sling. The eyes are terminated in a hand-tucked-type of construction.
Gator-Flex Grommets 速
These slings are endless for that short heavy lift connection. These slings can be made shorter than multi-part slings, but maintain all of the advantages. They are the most flexible grommets in the world. GATOR-FLEX速 GROMMETS (D/d = 5:1) Rated Capacity at 5:1 DF
WWW.TITANSUPPLY.CA
3
Rigging Products Tri-Flex Slings ®
These slings provide the best combination of strength and flexibility. Because of the patented TRI-FLEX® SLING construction, there is a large savings in material and machine costs in the larger sizes; this, combined with ease of use make TRI-FLEX® SLINGS the slings for smart buyers.
PIN SIZE EQUALS D/d OF 1.5:1 IN THE EYE
BASKET HITCH EQUALS D/d OF 5:1 USING FINISHED DIAMETER
T&D Ultra-Flex™ Wire Rope Slings This wire rope sling is an extremely flexible product with great applications for general rigging purposes in the transportation and distribution industry. It makes a fantastic choker sling especially when setting or removing utility poles. Development was through committee composed of utility company workers and members of the SLINGMAX design team. Actual field testing was used to determine merits of the final product.
T&D ULTRA-FLEXTM SLINGS TECHNICAL CHART
NOTE: Vertical rated capacity is based on 5:1 Design Factor, EIP, IWRC or GAC. Bending radius of the sling body is 5:1 where D is the Pin or Load and d is the sling body. D/d of loops: 1:1 where D is the pin and d is the sling body diameter.
4
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Rigging Products Gator-Laid Slings ®
For heavy lifting work this is the most efficient wire rope sling that meets all industrial and regulatory standards.This sling and the Gator-Max® sling are identical except the Gator-Laid® sling has metal sleeves for the splice connection. This is the product when a big lift but shorter sling is required. It has twelve parts of wire rope in the loop. The Gator-Laid® products were developed in conjunction with the offshore oil industry to provide the world’s best heavy lift wire rope slings. This sling has great flexibility. GATOR-LAID® SLINGS TECHNICAL CHART
NOTE: Rated capacity is based on 5:1 Design Factor.
Gator-Max Slings ®
For heavy lifting work this is the most efficient wire rope sling that meets all industrial and regulatory standards. In this sling, eyes have the wires (6 ropes = 12 parts) laid in parallel. The eyes are terminated in a hand-tuck-type of construction, and then they are wrapped with heavy duty material to keep them in position. This sling was developed to meet conditions specified by the US Navy and the Wire Rope Technical Board Sling Manual. Testing has proven it to be the strongest multi-part wire rope sling when attached to small pins. The eye is terminated in a hand-tuck-type of construction. Another extremely flexible sling. GATOR-MAX® SLINGS TECHNICAL CHART
NOTE: Rated capacity is based on 5:1 Design Factor.
WWW.TITANSUPPLY.CA
5
Tuff-Lift
®
Tuff-Lift Web Slings ®
Lightweight, pliable, and easy to handle Optional eye or endless configurations for various lifting equipment Non-sparking feature allows for use in explosive atmospheres Reinforced eyes for added durability Highly visible poly tag stands up to all working conditions Stocked in Polyester, available in nylon
Tuff-Lift Diamond Edge ®
Typically damage to a web sling starts along the edge and progresses across the webbing material. Specially coated threads are used on the edges of Diamond Edge Slings which can provide superior edge cut resistance, increasing sling life. Same features and benefits as standard web slings. Simply add a DE order code suffix to the Tuff-Lift® regular stock number to have your sling made with Polyester Diamond Edge webbing. Available in 1,2,3,4 and 6 inch widths.
VERTICAL
CHOKER
BASKET
1600 3100 4700 6200 7800 9300 11750 14700 17600 3100 6200 8800 11000 13700 16500 22750 28400 34100
1280 2480 3760 4960 6240 7440 9400 11760 14080 2480 4960 7040 8800 10960 13200 18200 22720 27280
3200 6200 9400 12400 15600 18600 23500 29400 35200 6200 12400 17600 22000 27400 33000 45500 56800 68200
5:1 Design Factor Working Load Limit in Pounds
APPROX. WT. (lbs./ft.) 0.06 0.11 0.17 0.23 0.27 0.35 0.46 0.57 0.71 0.11 0.21 0.33 0.46 0.53 0.69 0.92 1.13 1.42
Single Ply
WIDTH (in.) 1 2 3 4 5 6 8 10 12 1 2 3 4 5 6 8 10 12
Type 5 (Endless)
Double Ply
Double Ply
Single Ply
Type 3 & 4 (Eye & Eye)
WIDTH (in.) 1 2 3 4 5 6 8 10 12 1 2 3 4 5 6 8 10 12
VERTICAL
CHOKER
3200 6200 9400 12400 15600 18600 21150 26450 31750 6200 12400 17600 22000 27400 33000 42350 52900 63500
2560 4960 7520 9920 12480 14880 16920 21160 25400 4960 9920 14080 17600 21920 26400 33880 42320 50800
BASKET 6400 12400 18800 24800 31200 37200 42300 52900 63500 12400 24800 35200 44000 54800 66000 84700 105800 127000
APPROX. WT. (lbs./ft.) 0.11 0.21 0.33 0.46 0.53 0.69 0.92 1.13 1.42 0.22 0.42 0.66 0.92 1.06 1.38 1.84 2.26 2.84
5:1 Design Factor Working Load Limit in Pounds
All Tuff-Lift® Slings meet or exceed ASME B30.9 and WSTDA standards and regulations. Every sling is shipped with a Sling Safety Bulletin containing important information about the use of synthetic web slings.
6
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Tuff-Lift
速
Tuff-Lift Round Slings 速
Superior flexibility and a low stretch construction ensures load grip Non-sparking feature allows for use in explosive atmospheres A durable polyester double cover protects loads and improves inspectability Exclusive vertical weight load tagging system removes guess work from sling applications Strong, lightweight, and easy to handle Wear point distribution extends sling life
TR P
ITAN IGGING RODUCTS
! WARNING See round sling technical data page for inspection & removal criteria
CODE
FLAG COLOR
JACKET COLOR
VERTICAL
CHOKER
BASKET
APPROX. WT. (lbs./ft.)
WIDTH (in.)
A3
PURPLE
RED
3000
2400
6000
0.20
A6
GREEN
RED
6000
4800
12000
0.45
2 2
A9
YELLOW
RED
9000
7200
18000
0.65
3
A12
TAN
RED
12000
9600
24000
0.75
3
A14
RED
RED
14000
11200
28000
0.80
3
A17
WHITE
RED
17000
13600
34000
0.90
3
A23
BLUE
RED
23000
18400
46000
1.30
4
A26
ORANGE
RED
26000
20800
52000
1.50
4
A32
ORANGE
RED
32000
25600
64000
1.70
4
A40
ORANGE
RED
40000
32000
80000
1.90
4
A54
ORANGE
RED
54000
43200
108000
2.10
5
A68
ORANGE
RED
68000
54400
136000
2.50
5
A70
ORANGE
RED
70000
56000
140000
2.90
5
A90
ORANGE
RED
90000
72000
180000
3.50
6
5:1 Design Factor Working Load Limit in Pounds
Hooks & Shackles
BKB Safety Hook
Choker Hook S287
Bolt Type Sling Shackle S252
WWW.TITANSUPPLY.CA
Web Sling Shackle S281
Hoist Ring To Web HR125W
Web Sling Hook WS320A
HP Sling Connector S238
7
Twin-Path® Twin-Path® Extra Sling with Covermax® and K-Spec® Core Yarn TPXC This is the world’s first truly ergonomic sling with Covermax® covers for superior abrasion resistance. These are made in sizes up to 600 tons vertical rated capacity. Larger capacity slings are available on special order. These slings have overload indicators, inner red cover, and are used worldwide in place of wire rope slings for heavy lifts. They are approximately 10% of the weight of a steel sling. These products are repairable. The Twin-Path® patented design provides the rigger with two connections between the hook and the load for redundant back-up protection. These slings have less than 1% stretch at rated capacity. If ergonomics, productivity and safety are important, then these slings are the only choice. This is the lightest and strongest sling on the market today with K-Spec® – the longest lasting load bearing core yarn, backed by independent testing.
* Dimensions can vary according to the hardware or bearing points the slings are used with. Minimum is “tapered” width; Maximum is the flat tubing width. METRIC SLINGS AVAILABLE.
Check-Fast® Inspection System
(also known as the √ Fast System)
The Check-Fast® System is designed to improve job-site safety. The √ Fast® Tag and External Warning Indicator (EWI) on a roundsling product provides for a pass/fail inspection of the internal load bearing core yarn. Damage to the core yarn from ultraviolet (UV) light degradation, fiber on fiber abrasion, fatigue, and severe overload can be detected. If the sling is mistakenly overloaded beyond rated capacity, the EWI is designed to disappear before the sling fails. The sling inspector now has a GO/NO-GO inspection device rather than relying on a subjective handover-hand inspection to make an educated guess if the load bearing core yarns are in good condition. This safety system is available for High Performance K-Spec® Fiber Roundslings or polyester roundslings fabricated by authorized Patent #7,661,737 Foreign Patents Pending SLINGMAX® Dealers.
8
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Sling Protection Synthetic Sling Protection
CornerMax® Pad
CornerMax pads create a “tunnel” of cut protection- a no-touch zone. Therefore, the edge does not come in contact with the pad or sling thus protecting the sling. Note that the sides of the load must completely support the pads in order to create and maintain SLINGMAX ® the “tunnel”.
Tuff-Lift® ® Wear Pads
The Tuff-Lift® Wear Pad with Velcro closure provides for abrasion or wear protection. They will help keep the load ® from damaging the sling.
Tuff-Lift
RIGGING SOLUTIONS
CornerMax® Sleeves
CornerMax® sleeves may look like traditional protection sleeves, but ours are made of Dyneema® fiber that is specially woven to provide cut protection for a variety of edges and surfaces. Most commonly used sleeve material cannot stop an edge from SLINGMAX ® cutting the sleeve and possibly the sling too.
Magnetic Sling Protection
Made of solid nylon, attaches with magnets, works with: Steel slings, Flat Web slings, and Round slings. 1/7th the weight of steel, no tools are needed since magnets allow for quick and easy attachment and removal. Available in nine inch, 12-inch and 18-inch models.
RIGGING SOLUTIONS
Abrasion Protection Synthetic Armor™ Pads
For extra protection for synthetic, wire rope, and chain slings, we have available an assortment of materials that we incorporate in our Synthetic Armor Pads. These are primarily for abrasion or wear protection. Not only will these wear pads keep the load from damaging the slings, but they will also protect the load from being scratched by the slings. SLINGMAX ®
Tuff-Lift Web Padding
RIGGING SOLUTIONS
®
Eye Pad
Body Pad
WWW.TITANSUPPLY.CA
Edge Guard
Shackle Pin Pads The Shackle Pin Pad is the latest Slingmax Solution to the problem of sharp edges on the pin-side of a shackle. If you must rig a synthetic sling on the pin, protect it with a Shackle Pin Pad. This pad is easy to connect and easy to remove.
Tuff-Lift
Eye Sleeve
®
SLINGMAX
®
RIGGING SOLUTIONS
Tube Sleeve
9
Tuff-Lift
®
Chain Slings
SOG
SOS
CO
SGS
SGG
DOS
ADOS
Grade 80
DOF
DOG
Grade 100
SIZE (in.)
VERTICAL
CHOKER 120° or greater
2 PART 60°
3 PART 60°
4 PART 60°
SIZE (in.)
VERTICAL
CHOKER 120° or greater
7/32
2500
2000
3600
6500
6500
1/4 (9/32)
1/4 (9/32)
4300
3500
2800
6100
9100
9100
5/16
5/16
4500
3/8
7100
5680
12300
18400
1/2
12000
9600
20800
5/8
18100
14480
2 PART 60°
3 PART 60°
4 PART 60°
3440
7400
11200
11200
5700
4560
9900
14800
14800
3/8
8800
7040
15200
22900
22900
18400
1/2
15000
12000
26000
39000
39000
31200
31200
5/8
22600
18080
39100
58700
58700
31300
47000
47000
3/4
35300
28240
61100
91700
91700
3/4
28300
22640
49000
73500
73500
7/8
42700
34160
74000
110900
110900
7/8
34200
27360
59200
88900
88900
1
59700
47760
103400
155100
155100
1
47700
38160
82600
123900
123900
1 1/4
90400
72320
153300
1 1/4
72300
57840
125200
187800
187800
234900
234900
4:1 Design Factor Working Load Limit in Pounds
Chain Slings Information How to Order the Proper Chain Sling When ordering, please be sure to include the following: Type of Sling S – Single Chain D – Double Chain T – Triple Chain Q – Quadruple Chain Adjustable Styles: ASB – Single Style B ADB – Double Style B
Type of Master Attachment O – Oblong Link P – Pear Link R – Ring S – Sling Hook G – Grab Hook F – Foundry Hook
Type of End Attachment O – Oblong Link P – Pear Link R – Ring S – Sling Hook G – Grab Hook F – Foundry Hook
Sling Inspection & Testing Also Available! See our Services section for more details.
How to Select the Proper Chain 1. Determine the maximum weight of LOAD. 2. From the working load limit chart above, determine the SIZE of the body chain. Be sure to consider the effect of the angles. 3. Determine the REACH for the selected angle by measuring the distance from the upper bearing surface of the master link to the bearing surface of the lower attachment.
10
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Chain Slings Chain Slings GrabiQ - an all-inclusive chain sling system for coupling, shortening and lifting in Grade 100. The GrabiQ sling system is designed to improve and make your lifting as quick and easy as possible. The components are made from special quenched and tempered alloy steel, a guarantee for very high strength, low weight, high wear resistance and long life. All lifting components are uniformly marked with equivalent chain size, grade, manufactuers designation and name for positive identification.
Advantages • Never more than 3 fittings at the top of the chain sling • True Grade 100 for increased capacity – About 25% more than Grade 80 • Reduced sling weight in most cases • Reduced clutter to simplify rigging • Meets or exceeds all applicable standards of quality and safety • Built-in shortening pockets available for every leg • More flexibility for riggers • Quicker inspections • Distinctive colors to easily determine grade • Fewer bearing points for reduced wear and increased sling life
Chain Sling Options
2-Leg Adjustable Sling 7 Top Fittings Needed
WWW.TITANSUPPLY.CA
GrabiQ 2-Leg Adjustable Sling Only 1 Top Fitting Needed
11
Shackles Screw Pin Shackle
S209
G209
Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
Capacities 1/3 thru 55 metric tons. Forged - Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Hot Dip galvanized or Self Colored. Shackles 25t and larger are RFID EQUIPPED. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order. Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20 C. Look for the Red Pin速 the mark of genuine Crosby quality. Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes. Fatigue rated.
Alloy Screw Pin Shackle
Capacities 2 thru 21 metric tons. Forged Alloy Steel - Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Hot Dip Galvanized. Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
12
Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade B, Class 2, except for those provisions required of the contractor.
G209A
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Shackles Bolt Type Anchor Shackle Capacities 1/3 thru 150 metric tons. Working Load Limit permanently shown on every shackle. Forged — Quenched and Tempered, with alloy pins. Hot Dip galvanized or Self Colored. Fatigue rated (1/3t - 55t). Shackles 25t and larger are RFID EQUIPPED. Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Sizes 1/2t-25t meet the performance requirements of EN13889:2003. Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order. Shackles 85 metric tons and larger can be provided as follows: Non Destructive Tested Serialized Pin and Bow Material Certification (Chemical) Certification must be requested at time of order. Look for the Red PinŽ, the mark of genuine Crosby quality. Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
WWW.TITANSUPPLY.CA
S2130
G2130
Bolt Type Anchor shackles with thin head bolt - nut with cotter pin. Meets the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
13
Shackles Wide Body Shackle
S2160
G2160
All sizes Quenched and Tempered for maximum strength. Forged alloy steel from 7 through 300 metric tons. Cast alloy steel from 400 through 1550 metric tons. Sizes 300 metric tons and smaller are proof tested to 2X the WLL. Sizes 400 metric tons and larger are tested to 1.33 times WLL. All ratings are in metric tons, embossed on side of bow. G-2160 bows are furnished Dimetcoted, and pins are Dimetcoted, then painted red. S-2160 bows and pins are painted red. Shackles, 30t and larger, are RFID EQUIPPED. Greatly improves life of wire rope slings. Can be used to connect HIGH STRENGTH Synthetic Web Slings, HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings. Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble. Increases usable sling strength minimum of 15%. Pin is non-rotating, with weld-on handles for easier use (75t and larger). All 2160 shackles are individually proof tested & magnetic particle inspected Crosby certification available at time of order. Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Shackles requiring ABS, Lloyds and other certifications are available upon special request and must be specified at time of order. Shackles 18t and larger have DNV Type Approval to Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements. Databook is provided that includes required documents. Serialization / Identification Material Testing (Physical / Chemical / Charpy) Proof Testing
14
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Hardware
SCREW PIN ANCHOR SHACKLES
SCREW PIN ANCHOR SHACKLES
BOLT TYPE ANCHOR SHACKLES
Swivel Hooks
SWIVEL HOOKS
SWIVEL HOOKS WITH BEARING
ALLOY BOLT TYPE ANCHOR SHACKLES
Shur-Loc速
SHUR-LOC速 SWIVEL HOOKS
WEB CONNECTOR
SLING HOOKS
EYE HOIST HOOK
Spelter Sockets
Turnbuckles
HOOK HOOK EYE JAW JAW & HOOK & EYE & EYE & EYE & JAW
LOK-A-LOY
WWW.TITANSUPPLY.CA
CHOKER HOOK
OPEN SPELTER SOCKETS
CLOSED SPELTER SOCKETS
OPEN SWAGE SOCKETS
GRAB HOOKS
CLOSED SWAGE SOCKETS
Eye Bolts
ALLOY MASTER LINKS
ALLOY SUB ASSEMBLY
Clevis Hooks
Swaged Sockets
Connecting Links
HAMMERLOK
WEB SLING SHACKLE
Eye Type Hooks
SHUR-LOC速 EYE HOOKS
Alloy Master Links
Sling Savers
Alloy Screw Pin Anchor Shackles
CLEVIS GRAB HOOK
Wedge Sockets
UTILITY WEDGE SOCKETS
CLEVIS SLIP HOOKS
Wire Rope Super Terminators Clips
SUPER WIRE ROPE TERMINATOR CLIPS
Swivel Hoist Rings
DOUBLE CLEVIS LINK
15
Hoisting Equipment Series 653 Lever Hoist Capacities from 3/4 to 6 tons Impact resistant, stamped steel frame, gear case and cover for durability and light weight. Powder coated finish for added corrosion protection. Hardened steel load sharing gears. Double pawl arrangement for assured load control. Two chain guide rollers for positive chain engagement. Weston type braking system for positive load control and positioning. Simple one-handed, free chaining for fast load attachment. Hardened steel chain for strength and long wear life. Forged upper and lower hooks with heavy cast steel latches. Rubber handle grip for added operator comfort. Minimal maintenance with no special tools required. 5-year warranty against defects in materials and workmanship. Metric rated. Meets ASME B30.21 - Manually Lever Operated Hoist Standard and European CE Standard.
653 The CM Series 653 Lever Operated Hoist features a short handle and minimal lever pull effort combined with high quality, rugged, steel for close quarter pulling, stretching, and hoisting applications.
Series 657 Lever Hoist
Rated load capacities of 3/4, 1-1/2, 3 and 6 tons, with 5, 10, 15 and 20 foot standard lifts. Optional Load Limiter alerts operator of a possible overload by allowing the handle to rotate without lifting the higher-than capacity load. The load limiter can be field-installed. Impact resistant, stamped steel housing withstands rigorous use. Compact design is portable and easy to rig. Double reduction gearing and short, cushioned-grip handle provide easy operation with minimal handle effort. 360째 Rotating handle provides versatile rigging options when used in confined spaces. State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain. Enclosed screw-and-disc type load brake stays clean and dry for positive load positioning. Latches on hooks provide positive load engagement. Shipyard hook available for 1-1/2 ton & 3 ton models Lifetime Warranty
657 The CM Series 657 Lever Operated Hoist features through-hardened load chain and a short handle and a stamped steel ratchet lever for pulling, stretching, and hoisting applications.
16
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Hoisting Equipment Puller- Series 640 Lever Hoist
Tough aluminum alloy construction and powder coat finish Weatherproof for outdoor service Simple construction with fewer parts for ease of maintenance and lower inventories Hoistaloy hardened steel link type load chain for strength, long wear life and flexibility Weatherized Weston-type automatic braking system for positive load control
Easy, one-hand operation and control — only 58 pounds of pull required for 3⁄4 ton model capacity Forged upper and lower hooks with latches standard Free wheeling for fast and easy attachment to load Upper and lower Latchlok hooks available for all capacities Optional Load Limiter protection device stops transmission of lever forces protecting against dangerous overload Optional anchor sling simplifies attachment to allow anchor hook to swivel in tight space
Optional Load Sentry warns of overload condition Optional zinc-plated chain available Unlimited lift Lifetime warranty Metric rated Made in U.S.A.
640 The CM Puller is designed for heavy-duty construction and industrial applications. Used to pull, lift, drag or stretch.
Hurricane 360º Chain Hoist For the ultimate flexibility in a hand chain hoist, the CM Hurricane 360° is the choice for a wide range of applications. The patented hand chain cover rotates a full 360 degrees to allow loads to be lifted, pulled, or positioned from virtually any angle.
Series 622 Hand Chain Hoist
Simple, efficient, economical design Equipped with hardened load chain for flexibility and long wear Compact design, low headroom and lightweight steel construction for easy installation, even in confined spaces Weston-type load brake requires no lubrication Hand wheel cover with guide slots minimizes jamming and slipping Forged swivel hooks with latches reduce twisting of chain and unintentional unhooking of load when chain is slack Standard hand chain drop is 2 feet less than lift (example: 8 foot lift hoist has 6 foot hand chain drop) One-year warranty Metric rated Imported The CM Series 622 Hand Chain Hoist features a simple, efficient and economical design for easy installation and use.
WWW.TITANSUPPLY.CA
17
Hoisting Equipment Screwlok Shackled Beam Clamp Designed to fit flanges of most structural beams Act as a semi-permanent lifting point for use with manual or electric hoists Shackle incorporated for load suspension
SC922
Screwlok Beam Clamp
09003W
18
Rated loads from 1-10 Ton. Reduced flange stress — Special clamp jaw design distributes load away from flange edge. Threaded mechanism fits securely on a wide range of flange widths and beam sizes. Low headroom provided by built-in suspension bar.
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Hoisting Equipment Crosby IPTK Beam Clamp Available in capacities of 2 thru 25 metric tons. Wide variety of jaw openings available: 75 to 1020mm. Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body. Each product is individually serialized, with Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook. Maintenance replacement parts are available. Manufactured by a ISO 9001 facility. All sizes are RFID EQUIPPED.
IPTK This IPTK series beam clamp is suitable for use as a temporary tackle eye for a beam.
Crosby IPBKZ Plate Clamp Available in capacities of .75 thru 3.75 metric tons. Wide variety of jaw openings available: 0 to 28mm. Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. Company name (IP), logo, WLL and jaw opening permanently stamped on body. Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook. Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook. Minimum WLL of 10% of Maximum WLL. Maintenance replacement parts are available. Manufactured by a ISO 9001 facility. All sizes are RFID EQUIPPED.
WWW.TITANSUPPLY.CA
The IPBKZ beam clamp is used for lifting, transfer and stacking of I-Beams. An over-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in the vertical and horizontal moving, transfer and stacking of different types of structural designs, such as I-Beams, angles, etc, depending on the application desired.
19
Hoisting Equipment Crosby IP Plate Clamp
Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available upon request). Wide variety of jaw openings available: 0" to 6.13". Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body. Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook. Available in a variety of styles: IP10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB). IP10J - Larger jaw opening. IP10S - For use with Stainless Steel material. IP10H - For use with materials with a surface hardness to 47Rc (450 HB). Full 180째 turning range for material transfer, turning or moving. Lock open, lock closed ability with latch for pretension on material and then release of material. Optional IP-5000 Stinger assembly available, allows for easy connection between the clamp and hoist hook. Minimum WLL of 10% of Maximum WLL. Maintenance replacement kits are available. Manufactured by a ISO 9001 facility. All sizes are RFID EQUIPPED.
20
IP10 The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180째) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines.
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Hoisting Equipment Horizontal Lifting Clamp Available in capacities of .75 thru 25 metric tons. Wide variety of jaw openings available: 0" to 4". Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body. Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook. Maintenance replacement parts are available. Manufactured by a ISO 9001 facility. All sizes are RFID EQUIPPED.
IPHTONZ The IPHTONZ horizontal lifting clamps are for use in the lifting and transfer in horizontal position of non-sagging materials or of bundles of non-sagging material. These clamps must be used in pairs or more.
WWW.TITANSUPPLY.CA
21
Hoisting Equipment Series 633 Wide Range Trolley
Rugged steel side plates formed to include bumpers and trolley guards Frames connected by steel equalizer pin, secured by two nuts on each side Universal tread flanged trackwheels equipped with shielded ball bearings Easy rolling on American standard shapes, wide flange shapes or patented rail Hardened wheels and axles for added strength and durability Spacer washers can be shifted inside or outside for easy adjustment to wide range of beams To be used with hook suspended hoist Suspension plate for easy attachment is standard 3304 Bearings prepacked with lifetime lubricant The CM Series 633 Wide Range Trolley features a One-year warranty simple, rugged design built for trouble-free service Imported and ease of operation across a wide range of beam applications.
Corso Beam Trolley With endless chain drive Models from 250kg to 20t available Rolls on sealed-for-life ball bearings Easy adjustment to the size of the steel beam using crank Wide adjustment range Bumper stop and derailment guard Tipping guard With endless chain drive Movement is achieved through pushing Models Code Models Code Movement is achieved through an endless chain drive 1 T 23339 Large 1T 108929 Motorised movement
22
Pushing Trolley
Pushing Trolley Models Code
Models
Code
0,5 T
23309 Large 0,5 T
108879
1T
23319 Large 1 T
108889
2T
23319 Large 2 T
108899
2T
23349
Large 2T
108939
3T
23379 Large 3 T
108909
3T
23359 Large 3 T
108949
5T
23389 Large 5 T
108919
5T
23369 Large 5 T
108959
10 T
56279
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Hoisting Equipment Adjustable Spreader Beam Ideal where headroom is not limited. Adds stability to lift. Telescopic spread standard. Available with standard chain or wire rope rigging. Available with Adjust-A-Leg速 rigging for off center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating). Wide range of additional sizes and capacities available. Complies with ASME standards.
This is an adjustable spreader beam that provides a versatile solution for handling many different sized loads, ideal for outdoor applications.
3210610
The Caldwell Group
Adjustable Lifting Beam Bail adjusts horizontally for lifting unbalanced loads. Provides clearance in low headroom applications. Spread adjusts in 6" increments along lifting beam. Shackles included. Optional swivel hooks available. Complies with ASME standards.
WWW.TITANSUPPLY.CA
23
Hoisting Equipment Tirfor Wire Rope Winch The TIRMASTER is a light, powerful portable winching and hoisting unit that is easy to move and use. By moving the telescopic handle up and down, the wire rope passes straight through the TIRMASTER as if were hauled hand over hand, by means of two jaw blocks inside the unit. This basic principle ensures maximum safety as the load is automatically held secure. One set of jaws will not release until the other set takes the load. Model No. Lifting Capacity
T-13
T-35
1700 lbs
3300 lbs
6600 lbs
Pulling Capacity
2800 lbs
5500 lbs
11000 lbs
Test to:
3300 lbs
6600 lbs
13200 lbs
30”
41”
45”
Length of Telescopic Handle Wire Rope Size Net Weight
Features: Lightweight and Small Wire Rope is drawn straight through unit for continuous use Equipped with Safety Hook Unit can be used at any working degree Fastest transmission speed
T-7
5/16 in (8.3 mm) 7/16 in (11.1 mm) 5/8 in (16 mm) 17 lbs (8 kg)
48 lbs (22 kg)
61 lbs (27 kg)
Typical Uses: Pipe Laying Steel Erecting Police & Fire Emergency Work Suspended Scaffolding Logging Cable Tensioning Hunting Demolition Moving Stuck 4 x4’s Moving Machinery Moving Freight Cars Formwork Removal
Schaefer Come Along 5 foot lift Chain diameter: 7/16” & 3/8" Mechanical load brake when lifting Swivel hook with safety latch Can be used for lifting and pulling Hardened forged steel hooks with heavy duty latches Also known as chain type come-a-longs Double pawl for maximum load control Positive load control with mechanical brake Safety latches on both hooks Can be used at any angle
661H 7/16”
661S 3/8”
• Cover: Cold rolled steel • Gear: Heat-treated, forged and milled carbon steel • Chain material: 20MN2 premium alloy steel, black oxide, heat treated • Hook: Hardened, heat-treated and forged steel, oxide finish
24
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Rigging Products Blocks & Sheaves Titan Supply offers McKissick and Johnson Blocks for cranes and pickers. These specialized blocks are designed for various applications; ranging in single to multiple sheave designs with load ratings of 5 ton to 300 tons.
Permanent Lift Magnets Permanent Lift Magnets are used in steel supply, machine, and die shops where heavy steel objects must be moved rapidly and safely. The maximum rated lift is based upon lifting a clean, smooth, flat, low-carbon steel plate, 1.5" (38mm) or thicker with the full area of the magnet's lifting surface in contact with the load. Derating is required for plates with rust or scale, plates thinner than 1.5" and alloy steels. Standard Features & Benefits Packed with the highest quality rare earth neodymium magnetic material High lift capacity Ease of operation Low weight ... easy to move No power consumption Handle locks in “On” or “Off” positions to prevent unintentional operation Meets all the requirements of ANSI/ASME B30.20 (safety standard) These Magnets can lift Round Bar, Pipe, and Flat Plates easily.
Winches When you need to lift, pull or position with confidence, no one has more moving experience than Thern. From big to small, our winches and cranes make light work of your most challenging moves. Known for reliability and performance, Thern cranes and winches are the first choice for industries ranging from aerospace to oil and gas, manufacturing to wastewater, marine to construction and beyond. No matter how ordinary or unique your application, Thern has the perfect solution for you.
WWW.TITANSUPPLY.CA
25
Technical Data D/d Factor Determines Stress on Wire Rope When a wire rope is bent around any sheave or other circular object, there is a loss of strength due to this bending action. As the D/d ratio becomes smaller, this loss of strength becomes greater and the rope becomes less efficient. This curve, derived from actual test data, relates the efficiency of a rope to different D/d ratios. It is based on static loads only and applies to the 6×19 and 6×37 classes.
50
TR P
Efficiency
60
ITAN IGGING
70 80 90
RODUCTS
100
2
6
10
14
18
22
26
30
34
38
D/d Ratio
Angle of Choke
Effect of Temperature on Slings • Polyester Round Slings: Are not to be used in above 194°F (90°C) or below –40°F (–40°C).
• Web Slings: Are not to be used in above 194°F (90°C) or below –40°F (–40°C).
• IWRC Wire Rope Slings: Are not to be used in above 400°F
(204°C) or below –40°F (–40°C) without consulting an Engineer.
• Alloy Chain Slings: Are not to be used in above 400°F (204°C) or below –40°F (–40°C) without consulting an Engineer.
• Twin-Path Slings: K-Spec & Polyester Core slings should not ®
be exposed to temperatures above 180°F (82°C); however, coldtemperature exposure down to –40°F (–40°C) does not affect the strength of the products.
Common Hitches 100% of single leg
26
> 120° 90° – 120° 60° – 89° 30° – 59° < 30°
Rated Capacity* 100% 87% 74% 62% 49%
* As a percentage of Choker rating
Warning: Do not exceed working load limits.
Two Leg or Basket
Choker
Vertical
Angle of Choke
80% of single leg (75% for Wire Rope)
200% of single leg
60-degree sling angle
86.6% of vertical basket
45-degree sling angle
70.7% of vertical basket
30-degree sling angle
50% of vertical basket
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Technical Data Removal Criteria
as per ASME B30.9
Web Slings A web sling shall be removed from service if the following are present: • Missing or illegible Sling Tag • Acid or Caustic Burns • Melting or charring of any part of the sling • Holes, tears, cuts, or snags • Broken, or worn stitching in load bearing splices • Excessive abrasive wear • Knots in any part of the sling • Discoloration and brittle or stiff areas on any part of the sling, which may mean chemical or ultraviolet/sunlight damage • Fittings that are pitted, corroded, cracked, bent, twisted, gouged, or broken • Other conditions, including visible damage, that cause doubt as to the continued use of the sling Polyester Round & Twin-Path® Round Slings A synthetic round sling shall be removed from service if the following are present: • Missing or illegible Sling Tag • Acid or Caustic Burns • Evidence of heat damage • Holes, tears, cuts, or snags that expose the core yarns • Broken or damaged core yarns • Weld splatter that exposes the core yarns • Round slings that are knotted • Discoloration and brittle or stiff areas on any part of the sling, which may mean chemical or ultraviolet/sunlight damage • Fittings that are pitted, corroded, cracked, bent, twisted, gouged, or broken • Other conditions, including visible damage, that cause doubt as to the continued use of the sling • Overload indicators are no longer visible (Twin-Path® only)
Disclaimer: Please consult local and/or federal guidelines for occupational laws that apply in the area where you are working.
Wire Rope Slings A wire rope sling shall be removed from service if the following are present: • Missing or illegible Sling Tag • Broken Wires (as per stated criteria below): – For Strand-laid & Single-part slings, 10 randomly distributed broken wires in one rope lay, or 5 broken wires in one strand in one rope lay – For Cable-laid slings, 20 broken wires per lay – For six-part braided slings, 20 broken wires per braid • Severe localized abrasion or scraping • Kinking, crushing, birdcaging, or any other damage resulting in damage to the rope structure • Evidence of heat damage • End attachments that are cracked, deformed, or worn to the extent that the strength of the sling is substantially affected • Severe corrosion of the rope, end attachments, or fittings • Other conditions, including visible damage, that cause doubt as to the continued use of the sling Chain Slings An Alloy steel chain shall be removed from service if the following are present: • Missing or illegible Sling Tag • Cracks or breaks • Excessive wear, nicks, or gouges • Stretched chain links or components • Bent, twisted, or deformed chain links or components • Evidence of heat damage • Excessive pitting or corrosion • Lack of ability of chain or components to hinge (articulate) freely • Weld splatter • Other conditions, including visible damage, that cause doubt as to the continued use of the sling
Cautions & Warnings All ratings shown in this literature are based upon the items being in new or “as new” condition. Catalogue ratings are considered to be the greatest load that should be applied to the item; therefore, any shock loading must be considered when selecting the item for use in a system. The products shown in this literature are subject to wear, misuse, overloading, corrosion, deformation, intentional alteration and other usage factors which may necessitate a reduction in the products’ Rated Capacity or a reduction in its Design Factor. Therefore, it is recommended that all products be regularly inspected to determine their condition as a basis for deciding if the product may continue to be used at the catalogue assigned WL, a reduced WL, a reduced design factor, or removed from service. This literature does not take the place of Provincial and Federal Regulations, nor does it permit users to lift with rigging products that are without proper tagging or markings. Visit the Titan Supply website for additional technical information and resources www.titansupply.ca
WWW.TITANSUPPLY.CA
27
Rigging Services Western Canada’s First ever on-site inspection and repair service.
Features
TRS Mobile Test Unit
Inspect and proof test most rigging products right on site Completely self enclosed and powered by onboard generator Test Certificates available immediately 150,000 lb Proof Test capacity Each item is thoroughly inspected per OSHA, ASME, Industry Standards and/or manufacturer recommendation 30 ft. bed with 20 ft. Pin to Pin Pull and a 3/8” to 2” Wire Rope Gripper for added length capabilities
TR S
ITAN IGGING ERVICES
Inspection Service Titan Supply LP has qualified technicians available to inspect any Wire Rope, Chain or Synthetic Rigging product that requires inspection. Each item is thoroughly inspected per OSHA, ASME, industry standards and/or manufacturer recommendation and a detailed summary sheet providing the condition and recommendation for use or removal is provided.
Services
We have the capability to proof test all equipment that has passed the visual inspection process and documentation is provided.
Repair Service
Our qualified technicians can thoroughly inspect and repair all brands of synthetic, wire rope and chain slings as well as all makes of hoisting equipment and components inspected to ASME, ANSI, API 9A, industry standards and/or manufacturer requirements. All repairs are completed by qualified staff with proof testing done to twice their working load limit as per ASME standards. A document is provided with test results and certification.
Recertification Service
Titan Rigging Services can perform proof load and destruction testing on most types of rigging equipment. All of our Proof Test Beds are calibrated to ASME E4 standards, and our qualified technicians test according to industry standards and On-Site Inspections guidelines. Our largest Test Bed is capable of testing to 1.2 million lbs of pulling force. We store and provide written load test reports and certification documents. Online Inspection Certs Online Test Certificate Online Test Certificate
Online Test Certificate
Micro-Trac RFID based tracking system that will allow rigging users easier compliance checks, improved inspection scheduling, provide better accuracy, with more efficient inspections reducing labour costs and liabilities. 28
Online Test Certs
Fabrication
Load Testing
SUPERIOR PRODUCTS, EXCEPTIONAL SERVICE
Rigging Services Training and Seminars Titan Supply LP offers various seminars covering topics such as; rigging principles, current rigging standards, inspection requirements, basic sling hitches and working with various rigging equipment. These seminars are available at your facility or you can take advantage of our fully equipped facility. We offer written tests to help evaluate attendees understanding of topics presented, and as well provide supporting reference materials.
Resource Materials Titan Supply LP offers an extensive on hand library of available for purchase Resource Materials to suit your evey need. From our very own Titan Supply LP pocket charts, wall charts and inspection posters, to all different sizes of inspection manuals, videos, and even a complete series for Rigging Workshops. Our Resource Material is perfect for your toolbox talks, safety meetings, and even for classroom settings. Please visit us online or contact one of our locations today to find out more!
www.titansupply.ca
Titan Supply LP Pocket Card
Titan Supply LP Wall Chart
WWW.TITANSUPPLY.CA
Titan Supply LP Inspection Chart- Chain & Wire Rope Slings
Titan Supply LP Inspection Chart- All Slings
Titan Supply LP Inspection Chart- Round & Synthetic Slings 29
Edmonton (Head Office) 5303-75 Street Edmonton, AB T6E 5S5 Phone: 780-481-1122 Fax: 780-481-1503
Grande Prairie #112, 6901-98 Street Clairmont, AB T0H 0W0 Phone: 780-539-7316 Fax: 780-538-1844
Calgary 4155-75 Avenue SE Calgary, AB T2C 2K8 Phone: 403-236-1262 Fax: 403-236-5200
Red Deer Bay 3, 8068 Edgar Industrial Crescent Red Deer, AB T4P 3R3 Phone: 403-340-3620 Fax: 403-340-8370
www.titansupply.ca