H2O Catalog

Page 1

Section 4: H2O clever. creative. comfort.

www.titus-hvac.com | www.titus-energysolutions.com


Trust Titus • Building owners’ trust in occupant comfort; • Architects trust in functional, creative design solutions for air distribution; • Consulting engineers’ trust in state of the art air distribution responding with solutions that meet and exceed complex Green Building requirements; and, • Contractors trust in products that function as specified, implementing the best solutions for the building owner. Our catalog series helps all parties involved in the development of a commercial building reach their goals. Whether you are browsing the catalogs for new designs in air distribution or engineering a new LEED Platinum building, Titus can help. Our innovative, experienced team combined with state of the air test facilities in Plano, TX help advance the science of air distribution. We believe that advancing the science of air distribution and being a resource for our customers provides the best value for the owner, building occupants and the environment. It can be summarized in our Titus Tagline: Clever. Creative. Comfort. Keith Glasch Vice President

“‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.”


Titus Product Catalog, November 2011 printed in USA. Copyright Š 2011 by Air System Components, Inc. All rights reserved. No part of this catalog may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage and retrieval system without permission in writing from Air System Components, Inc. Product improvement is a continuing endeavor at Titus. Therefore, product descriptions are subject to change without notice. Contact your Titus representative to verify details.


contents

CORPORATE VALUES

INNOVATIONS

CASE STUDIES


Titus Product Catalog - Section 5: H2O ENGINEERING GUIDELINES CHILLED BEAM

B1

U1

FAN COILS

V1

AIR HANDLERS

W1

INDEX

Y1

INDEX

X1


SPECIFICATIONS

Vision Since 1946, we at Titus have had the distinct privilege of building on the legacy of our founder, Don Titus’ solid foundation of innovation, quality products, quality service and quality employees. Our goal is very clear - to help the people who depend upon us by continuing to innovate and advance the science of air distribution.

those they serve, we gain a better focus on the needs which we can best satisfy. Our business purpose is to serve our customers and the industry as a whole. We serve them with products that are innovative and more effective than those offered by our competitors. Our quality is evident in the ever-increasing product lines and service to our customers.

We are guided in this work by our commitment to significantly improve the health, efficiency, comfort and aesthetics of the environments in which our products are used. The primary guiding principle we follow is the belief that the ethical way is the only way to conduct our business. Actions speak louder than words. Our focus on every phase of our business contributes to our ability to better serve our customers and provide the best products and solutions.

The Titus of tomorrow will be larger and more robust than it is today, as has been the case since 1946. As Winston Churchill said “To improve is to change; to be perfect is to change often.” Titus will continue to change, but always with a focus on a spirit of service and surpassing the needs of the commercial HVAC industry world wide.

A SPIRIT OF SERVICE

To lead is to serve. By listening to our customers and

A4

CORPORATE VALUES

STABILITY

We are fully dedicated to serving the HVAC industry through the finest Representative firms. Our long term partnership with our representatives and our mutual


commitment with them is ultimately the key to our success. This results in stability in the market place unmatched by any other manufacturer.

Titus dedicates itself to be a company which looks forward to anticipate the needs of HVAC professionals and the people they serve. This dedication is based on our mission - to help HVAC professionals deliver better products and services, and to make life better for those who use our products.

At Titus, we don’t take our success for granted. Our employees know that success only comes through hard work, a commitment to excellence and a desire to make a difference in all that we do. We are proud of our achievements and will continue to work hard to deliver on our commitments.

CORPORATE VALUES

SPECIFICATIONS

Why has Titus continued to lead the industry for over 60 years? Our employees are viewed as having unique individual value with dignity and worth independent of the work they do. Each employee has a real sense of unity and commitment to the other, each contributing their invaluable work, so that their collective efforts result in Titus continuing to set the standard for excellence in the industry.

INNOVATION

Intelligent Innovation has been and will continue to be our hallmark. Many products inevitably face the cycle of growth, maturity, and decline due to changing market needs. Titus has made an unwavering commitment to improve existing products and develop or acquire new and unique products and technologies.

A5


Innovation

SPECIFICATIONS

For over 65 years, the name Titus has been synonymous with innovation in commercial air distribution. Many of the solutions we have developed over the years are still tried and true core products in our industry today. Intelligent Innovations speaks to our ability to solve problems and look at air distribution in new ways. Our true passion, however, lies in our ability to find clever and creative ways to enhance occupant comfort. Clever. Creative. Comfort. Several examples can be found within the pages of this catalog, and one of the stand-out products is the EOS; the industries first solar-powered, energyharvesting auto-changeover diffuser. Not only does the EOS provide THE solution for perimeter heating and cooling challenges, but it decreases the time it takes for an occupied zone to reach the setpoint, over the traditional split compromise diffuser, to improve occupant comfort. Additionally, the technology at work in the EOS provides us with a scalable energy

A6

CORPORATE VALUES

harvesting platform to use as a jumping off point to address thermal comfort in revolutionary ways. Another cleaver and creative example innovation from Titus is the Plexicon. Displacement ventilation, while a great solution for cooling a space, usually requires a separate or supplementary system for heating; which affects the design, installation and overall cost of a project. The Plexicon addresses this challenge by incorporating displacement cooling and mixedairflow heating into a single diffuser assembly with auto-changeover action. Providing both cooling and heating from the same diffuser eliminates the need for a secondary heating system, reduces overall project costs, and delivers a high level of thermal comfort to the building occupants. At Titus, we are continually working on developing new ways to advance the science of air distribution.


SPECIFICATIONS CORPORATE VALUES

A7


SPECIFICATIONS

Training

A8

Titus has long been recognized as a provider of world class training for the air distribution industry. Our various seminars, most notably our Consulting Engineer classes, provide students with valuable instruction in such areas as the Basics of Air Distribution, Energy Solutions, ASHRAE Standards and achieving LEED accreditation.

distribution and the solutions we offer.

Titus training provides practical information that can be applied to current projects or applications. Our training is highly interactive with hands on product demonstrations and technology-driven displays. We offer the opportunity to see products in action to help engineers understand the best applications for each product type or system.

Whether you are experienced or new at designing with HVAC, Titus training allows you to expand your HVAC knowledge.

Titus’ industry experts utilize our state-of-the-art lab and R&D facility as a backdrop for many of the sessions, and our participants consistently walk away from our classes with a broader understanding of air CORPORATE VALUES

At Titus, we highly value our time with customers, particularly the engineers specifying our products, because they allow us to forge lasting relationships that give us valuable insight into the day-to-day challenges they face.

GREEN SEMINAR xx LEED xx UnderFloor Air Distribution xx Displacement Ventilation xx Chilled Beam


CONSULTING ENGINEER SEMINARS xx Displacement Ventilation and Chilled Beam Products xx Air Distribution Product Selection & Application xx Terminal Unit Product Selection & Application xx Personal Comfort with Access Floor and VAV Diffusers xx Terminal Unit Controls and Applications xx Critical Environment Diffuser Applications

SPECIFICATIONS

xx Applied Acoustics (Lw, Lp, NC & RC) xx Air Distribution Patterns/Principles of Overhead Heating & A.D.P.I. xx Characteristics of Throw and Selection for Optimum Comfort xx Selecting and Applying HVAC products for LEED

CORPORATE VALUES

A9


SPECIFICATIONS

Energy Solutions

A10

Green Building design and energy conservation concepts are not new, yet in recent years the focus throughout the world has been to build structures with these principles in mind. We have seen the positive impact that designing and creating green buildings with these concepts have on our community and more importantly the world in which we live. As such, 100% of our focus for the past couple years and going forward has been on developing and delivering Green Solutions, and not just any Green Solution, but relevant Green Solutions. This is exactly the purpose of the Titus Energy Solutions website. The Energy Solutions micro-site is a first of its kind for any HVAC manufacturer in the industry. Our tagline, The Leader in Air Management is not just words. Titus is fully committed to provide the latest innovations to the HVAC market and this new website is just another piece to an ever-growing puzzle. By being singularly focused on Green products and Green Building CORPORATE VALUES

concepts, this website provides a portal into the latest developments in training, design, energy conservation, and news that directly affect us. We made every effort to incorporate all the tools needed to find the perfect Green Solution. Within the site you will find relevant product information, marketing collateral, LEED tools and other energy conservation related resources. We offer a wide array of Green products that can be used in a variety of applications. Whether you have a ceiling application or an underfloor installation, Titus has the Green Solution for you! Many of our products are GreenSpec Listed and we have a knowledgeable and experienced staff of industry professionals ready to provide assistance when needed. The marketing collateral we have made available on the Energy Solutions site is directly related to our Green products as well. The Energy Solutions


Brochure and the Retrofit Energy Solutions Guide are two brochures created to focus on Green products. The Energy Solutions Brochure is a 4-page guide that not only shows the types of products we offer, but highlights what LEED Credits they assist in achieving. The Retrofit Energy Solutions Guide provides a more thorough look into how an older building can be retrofitted and the energy savings available if new system or components were to be installed.

Our goal in creating the Energy Solutions website is to provide you with a very informative and green-focused interactive resource for today’s demanding building needs. Sustainable design and energy conservation concepts are here to stay and this new tool will assist you in meeting those demands.

CORPORATE VALUES

SPECIFICATIONS

We have also completely revamped our case studies to provide a more in-depth perspective into some of our Green projects. They illustrate the overall design process from concept to completion. Our case studies also display which Titus products were selected and highlights how they solved the project’s air distribution needs. We also have flyers, green presentations, installation manuals, and application guides available on the site.

The HVAC system plays a vital role in achieving healthy buildings to work in, but the LEED Credits associated with them tend to be missed. The sections of LEED that directly relate to Titus’ air distribution products primarily fall under Energy & Atmosphere (EA) and Indoor Environmental Quality (EQ) sections of LEED. The U.S. Green Building Council’s Leadership in Energy and Environmental Design standard (LEED) has quickly become the basis for determining a building’s “Green” status.

A11


Not Too Cool for School PROVIDE ENERGY EFFICIENT COMFORT WITH TITUS CHILLED BEAMS Titus active chilled beams create an ideal learning environment through proven technology. Suitable for either new construction or retrofit, Titus active chilled beams deliver comfort to each individual classroom with a compact design that requires less clearance than conventional VAV systems. Titus active chilled beams are very versatile, quiet, simple to install, require minimal maintenance and provide an energy efficient, cost effective alternative to typical VAV systems. Designed to operate with low system pressure, Titus active chilled beams supply fresh dehumidified ventilation to each room while simultaneously creating low velocity air motion with innovative high induction air nozzles. Room air is induced through the coil section where it is hydronically heated or cooled, before blending with the fresh air discharging into the room. With their low pressure design and no moving parts, Titus active chilled beams provide uncompromising comfort while meeting the most stringent classroom acoustical requirements.

Titus - The Leader in Air Management | www.titus-hvac.com | www.titus-energysolutions.com

TCM2


TAKE CONTROL OF OPEN SPACES

W I R E L E S S CONTROL PACKAGE Self-powered Wireless Motion Sensors offer an affordable, easy-to-use and easy-to-install option to help maximize energy savings. The occupancy sensor is powered using energy created from available room light, and is capable of storing energy for up two weeks in complete darkness.

mounts without wires, making installation quick and easy and keeping labor costs to a minimum.

When motion is detected, the sensor transmits a signal to the wireless communication thermostat. The thermostat is wired directly to the fan coil unit. The thermostat then receives the signal and automatically adjusts temperature set points to a preset range for either occupied or unoccupied modes. This new completely wireless sensor and communicating thermostat is an ideal solution for retrofit and new construction projects where building owners seek to reduce energy waste and save money. Conventional thermostats are unable to detect when a space is unoccupied. The occupancy sensor eliminates waste by ensuring unoccupied spaces are not unnecessarily heated or cooled. The sensor surface

MOTION SENSOR

• Save energy Eliminate energy waste • Save time Install in minutes • Save money Reduce electric bills and enjoy low labor costs for system installation WIRELESS COMMUNICATION THERMOSTAT

Titus - The Leader in Air Management | www.titus-hvac.com | www.titus-energysolutions.com


WIRELESS HOSPITALITY PACKAGE To Be or Not To Be Occupied, that is No Longer the Question... Titus presents the Wireless Solution to solve the problem of occupied space control for fan coils in hotel rooms and suites. The new thermostat is wired to the fan coil unit and communicates wirelessly with the key card sensor to determine if the room is occupied. Once the keycard is inserted into the wireless sensor, the thermostat receives a signal to change the fan coil to an occupied state, thereby quickly returning the space to the desired temperature for the guest.

• No wires means low installation costs. • No batteries required reducing cost and waste.

• Equipment occupancy control means more energy efficient operation.

KEY-CARD SENSOR

WIRELESS COMMUNICATION THERMOSTAT

Titus - The Leader in Air Management | www.titus-hvac.com | www.titus-energysolutions.com


Titus Vertical Stack Models - the competition just doesn’t stack up! Titus Vertical Stack (VS) Fan Coil units are designed for free-blow or ducted, concealed installations, suitable for hotel, motel, apartment, and hi-rise residential applications. With well over 1,200 different configurations the Vertical Stack units integrate seamlessly into any design. Designed to have a minimal impact on room aesthetics only supply grilles and return air/access panel are visible in the space. Factory installed valve packages and risers simplify and shorten installation time. Whisper-quiet operation Wireless, self-powered occupancy sensors Deluxe linear bar supply grilles and return panels Deluxe bladed aluminum supply grilles and return panels Highly configurable Easily serviced and maintained Environmentally friendly water coils (no refrigerants used) High-static option for applications with up to 0.5� ESP Risers available as unit mounted or shipped separately ETL Listed AHRI Certified

Titus - The Leader in Air Management | www.titus-hvac.com | www.titus-energysolutions.com


ROSEN SHINGLE CREEK RESORT HOTEL CLIENT:

Rosen Shingle Creek Resort

REPRESENTATIVE OFFICE: Tom Barrow Company

ABOUT THE PROJECT Rosen Shingle Creek Resort in Orlando is situated on 230-acres of lush landscape and is Central Florida’s newest and most luxurious meeting destination. The state-of-the-art hotel includes 1,500 guest rooms and suites, 445,000 square feet of technologically advanced event or meeting space, a 13,000 square foot spa, and several other amenties to numerous to mention. Designed to reflect early 1900 Spanish Revival style architecture, the hotel provides a glimpse into what life was like in the early years in Florida. The history of Shingle Creek reveals the captivating tale of how its majestic cypress trees provided some much needed shelter for early settlers and their homes. Today, the stunning grand lobby welcomes you into a world of lavish choices, complete with luxury accommodations, enticing restaurants and a championship golf course. VSR

A16

TITUS CASE STUDY


GREEN CASE STUDY

ARCHITECT/DESIGNER: Helman Hurley Charvat Peacock

LEED CERTIFICATION:

LOCATION:

None

Orlando, Florida

THE TITUS SOLUTION Titus supplied 1760 Vertical Stack fan coils for all the hotel rooms at the resort. Due to very specific requirements, a number of “special options” had to be incorporated into the standard Titus Vertical Stack fan coil to achieve a number of energy and installation cost savings. The primary special option and probably the most challenging to incorporate into a fan coil due to the high humidity in Orlando was the introduction and treatment of direct fresh air to the unit. This option not only provided substantial financial savings on the equipment and installation but also reduced the space required to layout the additional ductwork for a secondary fresh air system supplied by dedicated air handling units typically installed in the building roof. The solution to the challenge was the addition of a secondary “Wild Coil” in each unit with all the necessary controls which not only tempered the fresh air introduced directly from outside into each room but

also removed the excessive humidity particularly during the summer months. In coordination with Coastal Mechanical Services LL, Titus had to increase the spacing between the risers to allow the press tool to clamp the fittings into the riser pipes. Lastly and in order to achieve the highest energy cost savings, a specific thermostat was selected that cycled the fan/motor on and off at specific set points as specified by KLG/Orlando in order to meet the energy savings required by the resort owners.

THE END RESULT The Rosen Shingle Creek Resort Hotel is an example of a typical success story when all parties involved collaborate and work toward a common goal. It’s also an impressive structure that honors the location and history in which it was constructed while incorporating new building technology for the current generation of guests to experience. TITUS CASE STUDY

A17


UNF OSPREY FOUNTAINS RESIDENCE HALL CLIENT:

University of North Florida

REPRESENTATIVE OFFICE: Tom Barrow Company

ABOUT THE PROJECT The University of North Florida recently opened a spectalular dormitory for its ever-growing student body. At first glance, The Osprey Fountain residence hall is reminiscent of a luxury hotel that can be found on any tropical getaway. This LEED Silver Certified Building was designed by the Haskell Company and is 370,000 square-feet of space filled with many amentities for the students. The residence hall comes with laundry facilities, common lounges and kitchens, study areas, a convenience store, exercise and aerobics room, game room, swimming pool and lazy river pool, running and an 800 foot boardwalk through a natural wetlands.

THE TITUS SOLUTION The Osprey Fountains residence hall will be the largest on campus and required specially designed fan coil units to meet needs of the university and students. The Vertical High Output (VHC) fan coil unit was selected as the base design

A18

TITUS GREEN CASE STUDY

VHC


GREEN CASE STUDY

ARCHITECT/DESIGNER: Haskell Company

LEED CERTIFICATION:

LOCATION:

LEED Silver Certified

Jacksonville, Florida

for the project but needed several special features and modifications added in order to make the VHC unit the perfect choice for the Osprey Fountains. With Titus’s strong ability to customize fan coil units to meet a wide variety of project specific requirements, the VHC was customized to meet and exceed the University’s needs. Traditionally the VHC fan coil unit is installed in locations where the unit is not readably visible and is typically not painted. At the Osprey Fountains residence hall the units would be more visible and to make the units more aesthetically pleasing, the fan coil units would need have a painted finish provided. To accommodate the large size of the project, Titus found that it would be more cost effective to purchase 30,000 lbs. of pre-painted steel rather than paint the units individually. The VHC units used gray, pre-painted steel for the outer cabinet and any other components visible from the outside of the unit. Due to the location of the units and to improve filter maintenance, a rear access filter change out ability is also a requirement.

To accomplish this need, Titus designed a custom rear panel that would allow maintenance staff to remove this panel from the back of the unit and access the filter located in the front of the unit. To decrease unit installation time as well as to accommodate a variety of project site water connection locations, a method of connecting the fan coil unit to the building’s water supply would need to be provided. Stainless steel flex hoses were provided to make installation easier by allowing flexibility rather than rigid piping connections. In addition, Titus created an extra access cover that would be easily removable from the top of the unit and would enable maintenance staff greater access to service the valve package section of the fan coil.

THE END RESULT Titus is proud to provide Tom Barrow Co. and the University of North Florida with a customized fan coil product to make the Osprey Fountains Residence Hall a wonderful addition to the campus. This project underlines Titus’s ability to provide customized solutions to meet a wide variety of client needs. TITUS GREEN CASE STUDY

A19


ALA MOANA HOTEL CLIENT:

Ala Moana Hotel

REPRESENTATIVE OFFICE: Norman Wright Mechanical

ABOUT THE PROJECT The new Ala Moana Hotel is one the best hotels in Honolulu, Hawaii to make your escape from the day-to-day pressures in your life. This recently renovated hotel provides all the amenities that you’ve come accustomed to experiencing while staying at establishments similar to this one. Guests will experience an island vacation with a modern flare all wrapped into one. With over 1,000 rooms and suites, this hotel features a fitness center that comes complete with a sauna and steam room, fine dining, nightlife like no other in Hawaii, and a relaxing swimming pool area. Guests can also indulge in some of the best snorkeling on the island at the adjacent Ala Moana Beach Park. Exploring the ancient traditions of the Hawaiian people is easily accesible at the Polynesian Cultural Center. You can learn about the history of our nation at Pearl Harbor and the Arizona Memorial as well. Delight in the variety of nearby events or the stores at Ala Moana

A20

TITUS CASE STUDY

VBA


GREEN CASE STUDY

ARCHITECT/DESIGNER: Unknown

LOCATION:

Honolulu, Hawaii

shopping mall, and immerse yourself in all the wonders available in the area.

THE TITUS SOLUTION

LEED CERTIFICATION: None

renovated rooms will definitely add to the overall comfort level at the hotel. Our VBA fancoils will not only product occupant comfort, but allow the guests to set their own comfort level in each room.

Titus was pleased to partner with the designers to provide the airflow for this hotel. Our VBA fan coils were selected to be the primary source for air distribution. This Vertical Basic unit is factory assembled and designed for exposed floor standing applications. Its slim and attractive design also makes it blend well into the overall design of the guests rooms as well. Titus VBA fan coils work well in public buildings, schools, hospitals and general commercial applications.

THE END RESULT The Ala Moana Hotel experience is one that guests will remember for many years to come. The newly TITUS CASE STUDY

A21


UGA - THE NEW RESIDENCE HALL AT EAST CAMPUS CLIENT:

University of Georgia

REPRESENTATIVE OFFICE: Tom Barrow Company

ABOUT THE PROJECT Building 1516, or as it is more commonly known as the new residence hall at East Campus opened in the Fall of 2010. It provides double and single rooms with private bath facilities geared toward non-first year undergraduate students. Building 1516 is a signature and impressive structure that combines retrofitting an existing building and combining it with an addition to create a unique building for the student body to utilize. It also supports the academics and personal growth of the residents, provides a place where programs, classes and events are hosted, and most importantly, provides a home-away-from-home for the 555 students that reside there. This new building was also designed and constructed to meet significant Green Building concepts. Once certified, it will be the University of Georgia’s first Green Building. Some of the green elements utilized by the design team was to install Energy StarŽ qualified products, furnishing the building with eco-friendly furniture, using recycled water for showers and

A22

TITUS GREEN CASE STUDY

VSR


GREEN CASE STUDY

ARCHITECT/DESIGNER:

HADP / Collins Cooper Carusi Architects

LEED CERTIFICATION:

LOCATION:

Seeking Certification

Athens, Georgia

bathroom sinks, and placing locations on each floor for the students to turn in their recyclable materials.

THE TITUS SOLUTION Over 380 Vertical Stack fan coils were installed in majority of the rooms at the new residence hall. While reviewing the specified unit, we noticed flaws that could be improved upon. It had a slanted coil and was basically a vertical stack unit sitting on 4 legs. The contractor intended to run flex connection ducting from the wall, go between the legs of the unit, and then turn it 90째 up and connect into the bottom of the unit. What we saw was an opportunity to improve the overall design, thereby saving the contractor time and money, while reducing the possibility of future maintenance costs.

vative solution that far exceeded their expections. Once the design of the unit was complete, we had given the engineers a complete redesign of our vertical stack unit to include every required feature at the most competitive price available.

THE END RESULT By working closely with our reps, contractors, and engineers on projects such as The University of Georgia, we are able to determine and meet their specific needs while building future relationships and innovative products.

After several discussions and brainstorming sessions with the engineers, we were able to achieve all of our intended objectives and provide them with an innoTITUS GREEN CASE STUDY

A23


Terms of Use

Terms & Conditions

1. SELLER’S TERMS AND CONDITIONS: The terms and conditions as herein written shall supersede all previous agreements, communications, or contracts, written or verbal, and no understanding, agreement, term, condition, or trade custom at variance herewith shall be binding on Seller. No waiver or modification of the terms and conditions hereof shall be effective unless in writing and signed by both parties. 2. CREDIT AND TERMS OF PAYMENT: Unless otherwise specified, terms of payment are net cash, thirty (30) days after shipment. Interest at the legal rate applicable to judgments will be charged on past due accounts commencing after the last day of the first calendar month following the date of invoice. Seller may suspend credit and refuse shipment whenever Seller in its sole discretion believes Buyer’s credit is unsatisfactory, unless Buyer then makes arrangements for payment which are satisfactory to Seller. 3. TAXES: Prices do not include sales, use, excise or similar taxes or duties. If Seller should be required to pay the same, the prices will be increased accordingly. 4. DELIVERY: Quotations and sales are F.O.B. Seller’s plant unless otherwise expressly stipulated. Should shipping releases or schedules be changed therefrom for any reason beyond Seller’s control, Seller reserves the right to invoice accordingly to quantities or parts shipped. 5. DELAYS AND FORCE MAJEURE: Seller’s shipping dates are approximate. Seller will not be responsible for loss or damage arising from delays caused by lack of correct or complete data from Buyer or charges in or tardy approval of drawings by Buyer. Neither party will be responsible for loss or damage arising from delays caused by shortage of transportation, strikes, fires, floods, storms or any other circumstances beyond the party’s reasonable control. Should Seller be delayed by any of the above causes, Seller shall be given a reasonable extension of the time for performance hereunder. Seller may, during any period of shortage due to any of said causes, supply its own needs first and prorate its remaining supply of such goods among its customers in such manner as Seller in its sole judgment shall determine. 6. CANCELLATION: If the goods to be furnished under any contract arising from this agreement are for specific products and work made to suit Buyer’s special requirements, and Buyer cancels the contract in whole or in part through no fault of Seller, the Buyer shall pay to Seller as liquidated damages a sum equal to all of the expenses incurred by Seller in the performances of work under the contract including, but not limited to the following: • Cost of material not returnable to vendor or not reasonably usable for other work; • Engineering and shop labor including burden; • Cancellation charges paid by Seller for material and contract work ordered by Seller for the performance or work hereunder; • Administrative overhead (15% of items a, b, and c above); and • In lieu of profit, liquidated damages in the amount of 10% of items a, b, c, and d above. • Instructions by Buyer to suspend the work for a period of thirty (30) days beyond the time or times called for under the contract shall be deemed a cancellation for purposes of this paragraph unless a longer period is agreed to in writing by Seller. 7. EXAMINATION OF MATERIAL: Buyer shall examine goods promptly upon receipt of delivery from the transportation company. Buyer shall advise the transportation company of any damages or shortages thereof prior to acceptance of goods from the carrier and, except for any latent defects, shall advise Seller of any claims with respect to shortages, damages, workmanship or quality with ten (10) days after receipt thereof. Failure to so advise the transportation company and the Seller shall relieve Seller from any claim by Buyer for shortages, damages, workmanship or quality and shall constitute a waiver by Buyer of all claims with respect to said goods. 8. LIMITED WARRANTY: Titus Products warrants to Buyer, or any person receiving product during the duration of this warranty, for a period of twelve (12) months from the date of shipment from originating factory that the goods at time of shipment will be free from defects of material and workmanship for normal use and service. This warranty does not extend to goods subjected to misuse, neglect, accident or improper installation, or to maintenance of products which have been altered or repaired by anyone except Seller, Buyer, or any person receiving such a product during the duration of the warranty, shall contact the local Titus Representative or Titus Products - 605 Shiloh Rd, Plano TX 75074) as soon as any defect becomes known. Titus sole obligation under the foregoing warranty shall be limited to: at its option, repair or replace (and reship to Buyer with transportation charges paid to any place in the United States) defective goods provided, however, that if Titus is unable to correct a defective component part or product after a reasonable number of attempts, the Buyer shall be entitled to elect a refund at original Buyer’s purchase price. CHARGES ACCRUED AGAINST SELLER’S ACCOUNT WITHOUT PRIOR APPROVAL OF SELLER WILL NOT BE PAID BY SELLER. If after notifying Titus of defect, Buyer returns goods to Titus for repair and Titus determines that it has not breached the foregoing warranty, the Buyer will be assessed Titus regular reconditioning charges. Titus SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM DEFECTIVE EQUIPMENT. THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE. 9. EMPLOYMENT LAWS: Seller certifies that goods of its manufacture covered hereby are produced in compliance with the Fair Labor Standards Act, as amended, the Fair Employment Practices Law, as amended, and the regulations and orders issued pursuant thereto. • The Seller will comply with all provisions of Executive Order 11246 of September 24, and the rules, regulations, and relevant orders of the Secretary of Labor. • Seller certifies in the form prescribed in 41 CFR Chapter 1, Section 1-12, 803-10, regarding non-segregated facilities. 10. SUBCONTRACT: Seller reserves the right to subcontract any part of this work. 11. LAWS APPLICABLE: This contract is made according to the laws of the State of Texas, and the invalidity of any provision of such contract under the laws applicable thereto shall not invalidate the remaining provisions of such contract. 12. RETURNED GOODS: Authority to return goods must be obtained in writing from Seller. Any item returned by the Buyer for reasons of his own is subject to prepaid transportation charges and restocking charges. Additional charges for reworking or replacement of parts may be necessary.


engineering guidelines - fan coils

B www.titus-hvac.com | www.titus-energysolutions.com


www.titus-hvac.com | www.titus-energysolutions.com

Table of Contents

ENGINEERING GUIDELINES

B

B2

Engineering Guidelines - Fan Coils

overview Engineering Guidelines Overview...................................................................................................................................................B3

fan coils Fan Coils.........................................................................................................................................................................................B4 Types of Fan Coils...................................................................................................................................................................B4 Heat Transfer...........................................................................................................................................................................B8 Hydronic (Fan Coil) System....................................................................................................................................................B8 Room Load Calculations ........................................................................................................................................................B9 Psychrometrics.....................................................................................................................................................................B10 Properties of Coils and Coil Design ......................................................................................................................................B12 Vertical Stack Risers ............................................................................................................................................................B13 Riser Sizing...........................................................................................................................................................................B13 Expansion Loops...................................................................................................................................................................B14 Controls and Valve Packages................................................................................................................................................B15 Thermostat............................................................................................................................................................................B16


Overview

Engineering Guidelines - Fan Coils Air Conditioning Engineers (ASHRAE) Standard 70, Standard 113, Standard 130 and AHRI 880. Although Titus has no control over the system, design and application of these products, a function which rightfully belongs to the designer, this data accurately represents the product performance based on the results of laboratory tests. Furthermore, the recommended methods of applying this information have been shown by field experience to result in optimum space air distribution.

www.titus-hvac.com | www.titus-energysolutions.com

The selection and performance data contained in this catalog are the result of extensive studies conducted in the Titus engineering laboratories under professional engineering guidance, with adherence to sound engineering applications. They are intended to be aids to heating and air conditioning engineers and designers with skill and knowledge in the art of air distribution. The data have been obtained in accordance with the principles outlined within the American Society of Heating, Refrigerating and

B

ENGINEERING GUIDELINES B3


Engineering Guidelines - Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

Types of Fan Coils

B

Vertical Stack The Vertical Stack unit consists of a blower and motor capable of supplying up to 1200 cfm to the space, a cooling/ heating water coil, a drain pan for coil condensation and large amount of accessories to reduce installation times and cost. The purpose of the Vertical Stack Fan Coil is to provide cooling and heating to single or dual room spaces in response to a control signal from a single room thermostat. The unit is typically mounted in the room walls forming part of the conditioned area. There are four types of Vertical Stack units to meet various water distribution designs. • Model VSR (Vertical Stack Stand Alone) vertical mounted unit with wall mounted return air/access panel and discharge grilles normally have the water distribution risers as an integral part of the unit to facilitate the unit installation and reduce cost and time in the field. • Model VSRM (Vertical Stack Remote Master) as per the model VSR, however the risers are manufactured with various alternatives of connections for field connection to a remote Drone (VSRS) unit.

Figure 110. Typical Vertical Stack Application

• Model VSRS (Vertical Stack Remote Drone) as per the VSR unit, however the unit does not have risers and pipe connections are manufactured ready for connection to a remote Master (VSRM) unit.

FAN COILS

• Model VSM/S (Vertical Stack Master/Drone) twin pack unit, pre-piped at the factory, sharing a single set of risers and typically used when conditioning similar space areas such as hotel rooms.

B4

VSR

VSRM

VSRS

VSM/VSS


Engineering Guidelines - Fan Coils

Types of Fan Coils (continued)

www.titus-hvac.com | www.titus-energysolutions.com

Horizontal Basic The Horizontal Basic unit consists of a blower and motor capable of supplying up to 1200 cfm to the space, a cooling/ heating water coil and a drain pan for coil condensation. The purpose of the Horizontal Basic Fan Coil unit is to provide cooling and heating to a single room space in response to a control signal from the room thermostat. The unit is typically mounted above the space ceiling in a ceiling drop or soffit to maximize the usable floor space in the conditioned area. There are four types of Horizontal Basic units to meet various structural requirements. • Model HBC (Horizontal Basic Cabinet) mounts in the ceiling plenum and is ducted to a high sidewall air outlet. The HBC is an economical source of supplying warm or cool air to a room in response to the room thermostat. • Model HBP (Horizontal Basic Plenum) is the same unit as the HBC with the fan and blower housed inside an insulated plenum. The plenum provides sound absorption for the fan noise and a housing to mount an optional plenum air filter.

Figure 111. Typical Horizontal Basic Application

• Model HBR (Horizontal Basic Recessed) is mounted with the face exposed to the room on the ceiling. The face of the unit houses the return air inlet for inducing room air directly back to the unit for recirculation. The face is painted.

B

• Model HBE (Horizontal Basic Exposed) is mounted below the ceiling line with the entire unit under the ceiling line. This unit is commonly used in high bay open areas.

HBE

HBP

HBR

FAN COILS

HBC

B5


Engineering Guidelines - Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

Types of Fan Coils (continued)

B

Vertical Basic The Vertical Basic unit consists of a blower and motor capable of supplying up to 1200 cfm to the space, a cooling/ heating water coil and a drain pan for coil condensation. The purpose of the Vertical Basic Fan Coil unit is to provide cooling and heating to a single room space in response to a control signal from the thermostat. The thermostat could be located on the unit or on the wall. The unit is typically mounted beneath the window to be located in the area of the maximum load in the conditioned area. There are four types of Vertical Basic units to meet various structural requirements. • Model VBC (Vertical Basic Cabinet) mounts in an enclosed area on the perimeter beneath or adjacent to the window. The unit is enclosed with material similar to the room walls. A supply grille mounted atop the unit discharges conditioned air vertically into the space. • Model VBF (Vertical Basic Flat Top) typically mounts on the floor beneath the window but can be located on a wall adjacent to the window. The unit is encased in a painted sheet metal enclosure. An integral supply air grille is located atop the unit for conditioned air to be discharged vertically into the space. • Model VBA (Vertical Basic Angle Top) typically mounts on the floor beneath the window but can be located on a wall adjacent to the window. The unit is encased in a painted sheet metal enclosure. An integral supply air grille is located on an angled

Figure 112. Typical Vertical Basic Application surface atop the unit for conditioned air to be discharged vertically into the space. The angled surface discourages placing items on top of the unit, which blocks the air supply into the space. • Model VBL (Vertical Basic Low Profile) typically mounts on the floor beneath the window. The unit is encased in a painted sheet metal enclosure. An integral supply air grille is located atop the unit for conditioned air to be discharged vertically into the space. The VBL is mounted in a lower profile cabinet for use with a window, which is mounted closer to the floor. The smaller cabinet limits the maximum airflow to 600 cfm for this model. • Model VBLC (Vertical Basic Low Profile Concealed Floor) mounts in an enclosed area on the perimeter beneath or adjacent to the window. The unit is enclosed with material similar to the room walls. A supply grille mounted atop the unit discharges conditioned air vertically into the space. The VBLC is mounted in a lower profile cabinet for use with a window, which is mounted closer to the floor. The smaller cabinet limits the maximum airflow to 600 cfm for this model.

FAN COILS

VBLC

B6

VBA

VBC

VBF

VBL


Engineering Guidelines - Fan Coils

Types of Fan Coils (continued)

The High Output Series units consist of a blower and motor capable of supplying up to 2000 cfm to the space, a cooling/ heating water coil and a drain pan for coil condensation. The purpose of the High Output Series Fan Coil units is to provide cooling and heating to a multi-room space in response to a control signal from the area thermostat. The unit is typically mounted outside the conditioned area to minimize the noise generated by a larger blower. There are three Horizontal High Output models and one Vertical High Output model. • Model HHC (Horizontal High Output Cabinet) is typically mounted in a ceiling plenum space above a hallway or non-critical room. Care must be taken to provide access to the unit for service. Ductwork attached to the unit discharge will deliver the conditioned air to the air outlets mounted in the ceiling or high sidewall of the rooms being served. Return air inlets from the room to the ceiling plenum are required for units mounted above a ceiling.

Figure 113. Typical Horizontal High Output Application

B

• Model HHP (Horizontal High Output Plenum) is the same unit as the HHC with the fan and blower housed inside an insulated plenum. The plenum provides sound absorption for the fan noise, and a housing to mount an optional plenum air filter. The return air inlets can be ducted directly to the unit plenum. • Model HHE (Horizontal High Output Exposed) is designed for larger spaces where noise is not critical. The galvanized steel cabinet is typically not painted. The unit is mounted above the conditioned space and can be ducted to multiple air outlets or discharged directly above the space.

www.titus-hvac.com | www.titus-energysolutions.com

High Output Series

Figure 114. Typical Vertical High Output Application

• Model VHC (Vertical High Output Cabinet) is designed for larger spaces where ease of maintenance is desired. The unit is typically located in a closet where a door from the occupied space opens for easy access.

FAN COILS

HHC

HHP

HHE

VHC

B7


Engineering Guidelines - Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

Heat Transfer

B

ASHRAE defines heat transfer as “the flow of heat energy induced by a temperature difference.”

Thermal convection is the transfer by eddy mixing and diffusion in addition to conduction.

Heat loss is measured in “Btu” which is the amount of heat required to raise 1 lb. of water 1BF. Coefficients used to estimate the value of the heat loss include: • K Factor, which is the amount of heat transferred in 1 hour through 1 sq. ft. of material, 1” thick at 1BF of temperature difference. • C Factor, which is the amount of heat transferred in 1 hour through 1 sq. ft. of material through the specified thickness of the material used. • R Value, is the resistance to heat transfer, measured as the reciprocal of conductance (1/K or 1/C). • U Value, designates the overall transmission of heat in 1 hour per sq. ft. of area for the difference of 1BF across specified material. • Conductance of individual materials is not directly applicable to the heat loss calculation. First, it must be converted to the ‘R’ value, which is (1/K or 1/C).

The transfer of fluid currents produced by external sources, such as by a blower, is called forced convection.

Equation 1: For a structure with multiple skin materials, the total heat transmission can be calculated as:

Thermal energy can be transferred or be affected by: • Conduction • Convection

• Radiation • Humidity

Thermal conduction is the mechanism of heat transfer by the transfer of kinetic energy between particles or groups of particles at the atomic level. With solid bodies, such as with an air jet near a window, thermal conduction dominates only very close to the solid surface.

When the fluid air movement is caused by the difference in density and the action of gravity, it is called natural convection. Natural convection is very active near windows and near heat sources in the occupied spaces. The colder air falls and the warmer air rises. Radiant heat transfer takes place through matter. It is a change in energy form, from internal energy at the source to electromagnetic energy for transmission, then back to internal energy at the receiver. Examples of radiation are sunshine through the air and window to the inside floor or ceiling light to occupants and to the floor. All of these methods of heat transfer effect a person’s comfort reaction. In addition, humidity has some effect caused by a change in evaporation rate from the body.

FAN COILS

Heat transfer is also affected by the following factors: • A greater temperature difference will result in a greater amount of heat transfer. • The amount of surface area is directly proportional to the amount of heat transfer. • The amount of time is also directly proportional to the amount of heat transfer. • The thermal resistance of the material use affects the rate of heat transfer.

B8

U = 1/(R1 + R2 + …..Rn)

HYDRONIC (FAN COIL) SYSTEMS For hydronic heating and cooling fan coil systems heat is removed from the occupied space (cooling) or added to the occupied space (heating) via a closed looop water system. Return air from the space passes across a fin tube coil. The re-conditioned air is returned to the space through the supply air outlets. During the cooling season, heat from the return air is transferred to the water passing through the coil. The warmer water is piped to the chiller where the heat is removed and the cooler water is re-circulated. After the return air passes through the coil and the heat is removed, it is directed back to the space through the supply air outlets as directed by the room thermostat. During the heating season, the cool return air passes through the fin tube coil. Return air is heated by the warm water being piped through the coil, and is directed back to the room through the supply air outlets as directed by the room thermostat. Manufacturer’s performance data will quantify the coil heat transfer rate (Btu/H), given the airflow rate (cfm), entering air temperature dry and wet bulb (eat), water-flow rate (gpm) and entering supply water temperature (ewt) or entering and leaving water temperature (ewt/lwt) instead of water flow rate.


Room Load Calculations

Engineering Guidelines - Fan Coils

Some of the unique features differentiating fan coil applications from other commercial applications include: Heat gains are primarily imposed on the building through walls, windows, ceilings, doors and infiltration. Loads imposed by people and lighting is less significant. Load characteristics for fan coil zones can be more narrowly defined than zones for commercial spaces. The factors for a specific zone orientation, outdoor exposure and climate zone need to be considered. Exterior or interior shading and the time of the day affect the solar load. Another load on the space may be imposed by infiltration of outdoor air through windows and doors. Additional implements may be used for occupant comfort during extreme design situations. Ceiling fans can provide occupant comfort during warm conditions. Heat from sources such as a fireplace may provide extra comfort for cold conditions. For sleeping rooms, bed linens may be added or removed to enhance comfort. Most fan coil systems are used for relatively small capacity systems. Because loads are commonly determined by outdoor conditions, and very few days during a heating or cooling season are at design conditions, partial load conditions are prevalent. Therefore, over sizing the unit can decrease comfort in the space, especially during humid conditions. During high humidity operations with lower dry bulb temperatures, the thermostat will direct an oversized unit to short cycle, leaving uncomfortable levels of humidity in the space. For climate zones with higher humidity levels, selecting a smaller capacity unit will allow for maximum dehumidification and comfort for the majority of the cooling season with slight discomfort on the few days when design conditions occur. Additional information and a detailed discussion of calculating the cooling and heating loads in a space can be found in the Air Conditioning Contractors Association (ACCA) Manual N for Commercial Load Calculation, ASHRAE SDL Curriculum on Heating and Cooling Loads, or ASHRAE TC-4.0 Technical Committee for Load Calculations. The following are some equations commonly used for heating and cooling load calculations in a space.

Equation 2: Heat transfer through a window or wall: Q = U * A (t1 – t2) Where : Q is the Btu/H U is the overall coefficient Btu/HA A is the area in Ft2 t1 and t2 are the temperatures in BF

Equation 3: Equation for exterior surfaces – cooling: Q = U * A * Dt

Where: Q is the heat flow in Btu/H U is the value for the component under consideration Dt is the temperature difference across the component under consideration

Equation 4: Equation for heating and non-exterior cooling: Q = U * A * Dt Where: Q is the heat flow in Btu/H U is the value for the component under consideration Dt is the temperature difference in degrees F between indoors and outdoors across the component under consideration, taking into account the combined effect of radiation, time lag, storage and temperature

www.titus-hvac.com | www.titus-energysolutions.com

For fan coil products the typical application characteristics are similar to multi-family residential building. For these structures heating and cooling load calculations will differ from commercial applications.

B

Equation 5: Equation for sensible heating and cooling load: Q = 1.08 * cfm * Dt Where : Q = is the load in Btu/H 1.08 is a constant for density at sea level. cfm is the volume of conditioned air Dt is the temperature difference between the supply air and the room control temperature

Equation 6: Equation for latent cooling load: Q = .68 * cfm * GR

FAN COILS

Where: Q = Load in Btu/H .68 is the latent load constant GR = difference between absolute humidity between indoor humidity/area and outdoor humidity/area

B9


Engineering Guidelines - Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

Psychrometrics

B

One of the four major elements of thermal energy and comfort is humidity. Psychrometrics uses thermodynamics properties to analyze conditions and processes involving moist air. A detailed study of psychrometrics can be found in Chapter 1 of ASHRAE 2009 Fundamentals Handbook. This section is a summary of how knowledge of psychrometrics can be used to maximize space comfort and system performance.

The Wet-bulb Temperature (WBT), is the temperature measured using a ‘wetted’ thermometer. Wet-bulb is used to determine the moisture content of air. The Absolute Humidity (AH), is the vapor content of air. It is described in terms of moisture per lb of dry air or grains of moisture per lb of dry air. AH is also referred to as ‘moisture content’ or ‘humidity ratio.’ There are 7000 grains in a lb. of water.

Atmospheric Air (the air that you breathe), contains many gaseous components including water vapor and containments. Dry Air is atmospheric air with all moisture removed and is used only as a point of reference. Moist Air is a combination of dry air and water vapor and can be considered equal to atmospheric air for this discussion.

The Relative Humidity (RH), is the vapor content of air. It is described as the percentage of saturation humidity at the same temperature (%). The goal for optimum space comfort is 30-35% for heating conditions, and 45-60% for cooling conditions. Saturation humidity is the maximum vapor content (lb/lb) per lb dry air that air can hold at a fixed temperature.

A psychrometric chart (Figure 115) is a graphical representation of the thermodynamic properties of moist air. There are several charts available to cover all common conditions. The one shown here is taken from ASHRAE 2009 Fundamentals Handbook, Chapter 1 and illustrates conditions of 32 to 100BF at sea level.

The Dew Point Temperature (DPT), is the temperature at which vapor begins to fall out of air to form condensation. DPT is the temperature at which a state of saturation humidity occurs, or 100% RH. It is also known as the saturation temperature.

The Dry-bulb Temperature (DBT), is the temperature measured using a standard thermometer. Dry-bulb is also known as the sensible temperature. 55

60

90 50

.028

Sensible Heat Ratio 1.0

:

1.0

5000

0.6 0.5

Sensible Heat Total Heat

Qs Qt

3000

0.4

-1

2.0 4 8.0.0 : -48.0 -2 .0 .0

85

-2000 -1000

15.0

0.8

:

85

0

20

0.

3

00

0.1

0.2

.5 -0 .4 -0 3 -0.

-0.1

00

Bu lb

.024 Te

mp

55

era

tur

40

e, °

F

.022

80

1000

Enthalpy Humidity Ratio

We t

80

50

-0.2

15

0

.026

45

.0

0

Dh DW

60

.020

75

35

50

14.5

.018

°F e, pe

ou nd

70

Te m

rP pe

.014

tio ur a Sa t

e-

lum

Vo

80

60

cu. Dry Bulb Temperature, °F

20%

10

B10 B10

15

105

100

95

90

85

80

75

Humidity 70

65

60

55

50

45

40

35

12.5

10% Relative

20

Enthalpy - Btu per Pound of Dry Air

Figure 115.  Psychrometric Chart

.010

40

.008

.006 35

.004

.002

115

30%

13.0

FAN COILS

40%

40

35

ir

50%

45

ry A

35

50

%

60

13.5

45 40

.D er lb

55

50

ft. p

% 70

110

55

Humidity Ratio - Pounds Moisture per Pound Dry Air

14.0

%

20

.012

65

%

90

120

25

60

15

45

65

n

tu -B lp y En th a

.016

ra tu r

of

D

ry

A

ir

75 70

30

30


Psychrometrics (continued)

Engineering Guidelines - Fan Coils

The Enthalpy (H) is the heat content of air. Enthalpy is also known as the total heat of air. Enthalpy is dependant on the wet-bulb temperature of air. It is described in terms of Btu’s per lb dry air (Btu/lb). A Status Point is a location on the psychometric chart defined by any two psychometric properties. A hydrometer or psychrometer is commonly used to define a status point. Using a psychrometer. A sling psychrometer incorporates a standard thermometer and a wetted thermometer. The wetted thermometer should be dipped in room temperature distilled water. The psychrometer is spun (slung) until the wet-bulb temperature has stabilized.

Sensible heating (Qsen), is the heat that raises the dry-bulb temperature of air without increasing the moisture content. Because we can easily sense this change in temperature, it is called ‘sensible.’ Sensible cooling is the removal of heat without removing moisture content of the air. Latent Heat (Qlat), is the heat content of air due to the presence of water vapor. Latent heat is the heat required to evaporate this same amount of water (970 Btu/lb), also known as the latent heat of vaporization. As latent heat increases, moisture content increases. Water can be heated to 212BF. If more heat is added, the water will vaporize but the temperature will not change. Latent Cooling (Qlat), is the removal of latent heat from air without lowering the dry-bulb temperature. To retrieve 1 lb. of condensate, 970 Btu’s would need to be removed. As latent heat decreased, moisture content decreases. Latent Heat of Fusion is the heat required to change a liquid into a solid (144 Btu/lb. Water can be cooled to 32BF. If more heat is removed, it wall cause ice to form. To retrieve 1 lb of water from ice, 144 Btu’s will need to be added.

When the wet-bulb temperature has stabilized, record both the dry-bulb and wet-bulb temperatures on your log sheet. Because of evaporation, the wet-bulb temperature will be equal to or less than the dry-bulb temperature.

Sensible processes can be shown as horizontal paths on a psychrometric chart. Latent processes can be shown as vertical paths on a psychrometric chart. Most processes include both, resulting in an angled or diagonal path.

At 100% RH the wet-bulb will equal the dry-bulb temperature. (Locate an umbrella before continuing the test). As the temperature difference between temperatures increases, the RH will decrease.

Sensible heat factor is the measure of sensible heat to latent heat. Sensible heating only is 1.0. Equal proportions result in 0.5. SHF is generally higher than 0.5 because of the cooling processes that remove more sensible heat than latent heat. For residential applications the typical Sensible heat factor is 0.8.

To locate your status-point, find the dry-bulb temperature on the bottom of the psychometric chart. Follow this line upward until it intersects with the wet-bulb temperature from the left side of the chart.

www.titus-hvac.com | www.titus-energysolutions.com

The Specific Volume (Spv), is the reciprocal of air density which is described in terms of cubic feet per lb of dry air (cu ft/lb). An increase in air temperature will result in a decrease in density and an increase in volume. A decrease in atmospheric pressure also decreased air density while increasing volume. At 5000 feet above sea level, density is decreased by 17%. Higher altitudes require larger motors and blowers to move the same effective mass, due to the increase in specific volume.

B

From the ‘status point’ you can locate:

• Absolute Humidity (AH) • Relative Humidity (RH) • Dew Point Temperature (DPT) • Specific Volume (Spv)

When will condensation occur? To determine if a supply air duct or air outlet device will form condensation on the surface: First, using the R-value of any thermal barrier, determine the minimum surface temperature.

If the surface temperature is equal or lower than the DPT, the surface will form condensation. If yes, an additional thermal barrier may be required to solve the problem.

FAN COILS

Next, determine the DPT of the atmospheric air in contact with the surface.

B11


www.titus-hvac.com | www.titus-energysolutions.com

Properties of Coils and Coil Design

B

Engineering Guidelines - Fan Coils

Fan coil units are typically selected and sized to heat and cool a small zone with specific load requirements. Each unit defines a small zone, which typically serves a few rooms with a centrally located thermostat. Basic and vertical stack units are usually selected for single room applications. The hot and cold water supply usually serves all or part of a single building. Water can be supplied to each unit through a two-pipe or four-pipe water supply system.

Air Stream

T = 80°F

T = 60°F

Two-pipe systems will have a lower installed cost. With a two-pipe system, both hot and cold water are supplied using the same pair of pipes. The lower cost usually translates to a lower level of occupant comfort. This limitation can cause problems when heating is desired in one unit at the same time cooling is desired in another due to solar or internal load requirements. For moderate climate regions, two-pipe systems can operate in the cooling mode with supplemental resistance heat available in zones requiring heat. Four-pipe systems maintain higher levels of occupant comfort for all seasons. Both hot and cold water are left operational during the spring and fall seasons. This additional comfort may result in higher operational cost for utilities to operate both the chiller and the boiler during the spring and fall months.

Ts = 45°F T = 55°F

Ts = 45°F T = 45°F

Figure 116. Coil Design

In

Out

Air

Water side applications for fan coil designs use a chiller to lower the water temperature for heat removal and a boiler to raise the water temperature to overcome heat losses. The water supply used is typically supplied by the local utilities. Other chemicals may need to be added to the water. Sometimes, local climate conditions require that additives such as Ethylene glycol, Propylene glycol, Methanol, Calcium chloride or Sodium chloride be added to the water supply. Care should be taken to account for changes in heat transfer caused by these additives.

Return Bend End Figure 117. Parallel Flow

Out

Out

In

In

FAN COILS

Air

Return Bend End Figure 118. Cross Flow

B12 B12


Vertical Stack Risers

Engineering Guidelines - Fan Coils VSR VSM

Vertical stack models can minimize installation cost because the units are orientated one on top of the other and use common supply and return water pipes. For tall structures with more than three floors, it is recommended to adjust the pipe size for optimum performance. The term “riser” describes the pipe used to transport supply or return water (chilled or hot) to or from the vertical stack unit water coil as well as condensate water from the drain pan.

VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM

Risers are typically insulated with elastomeric, closed cell, thermal insulation to minimize heat loss or gain from the water to the ambient space. If the unit is not equipped with a riser pipe of adequate length to reach from floor to floor, a riser extension can be installed to connect the vertical stack unit to a unit located on an adjacent floor. The riser extension can also act as the transition where the pipe size changes from one floor to the next. The diameter of the pipe will increase or decrease as piping extends throughout the building in order to equalize pressure and velocity of the water flow.

VSR VSM

VSR VSM

VSR VSM

www.titus-hvac.com | www.titus-energysolutions.com

For high-rise buildings where a common floor to floor footprint is present, it may be economical to design the system using vertical stack fan coil units.

S

R

S

S

R CHILLER

R BOILER

Figure 119.  Piping Layout for a Horizontal 2-Pipe System with Standard Return Piping

B

RISER SIZING A detailed discussion on water pipe sizing can be found in the ASHRAE 2009 Fundamentals Handbook, Chapter 22. In general, operating pressure between the supply and return riser is in the range of 10 to 15 psi. Design velocities are typically between 1 and 4 fps. Typical riser pressure loss is designed for about 3 feet of head pressure loss per 100 feet of piping. As a rule of thumb, 10 feet of head pressure equates to about 5 psi.

S

CHILLER

R BOILER

VSR VSM

Water delivery can be made through a two-pipe system using three risers (one each supply, return and condensate) or a four-pipe system using five pipes (chilled water supply, chilled water return, hot water supply, hot water return and condensate pipe) as specified.

VSR VSM

Reminder: Two-pipe systems may require supplemental electric heat for moderate times when some zones require cooling while other zones require heat.

VSR VSM R

S

Figure 120.  Piping Layout for a Vertical Stack 2-Pipe System with Standard Return Piping

FAN COILS

Two different configurations are available for return piping, standard return and reverse return. In the standard configuration, (Figures 119 and 120), water flows from the first fan coil in the loop through the last, and returns from the last unit back through the first. In a reverse return system, (Figures 121 and 122), both the supply and return flow run from the first unit in the system through the last and returns to the chiller through a separate riser.

S

R

B13


Engineering Guidelines - Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

Vertical Stack Risers (continued)

VSR VSM

VSR VSM

S

R VSR VSM

VSR VSM

VSR VSM

S R VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM

S S

R

S

CHILLER

R BOILER

S

Figure 121.  Piping Layout for a Horizontal 2-Pipe System with Reverse Return Piping

S

S

CHILLER

R

Figure 122.  Piping Layout for a Vertical 2-Pipe System with Reverse Return Piping

R

CHILLER

BOILER

VSR VSM

VSR VSM

VSR VSM

VSR VSM

VSR VSM S S

Figure 123. Vertical Stack 4-Pipe System with Standard Return Piping

EXPANSION LOOPS

Copper pipe will expand and contract with changes in pipe temperature created by changes of water temperature. Each Titus vertical stack unit is equipped with an internal expansion loop.

R BOILER

R

VSR VSM

R

S

S

R

R

FAN COILS

R

BOILER

R

R

B14 B14

S

CHILLER

VSR VSM

R

B

VSR VSM

S S Figure 124. Vertical Stack 4-Pipe System with Reverse Return Piping

For two-pipe systems where the same pipe carries both chilled and hot water and high rise buildings with more than five floors, additional expansion loops may be required.


Engineering Guidelines - Fan Coils

Controls and Valve Packages

The room thermostat performs the function monitoring the room temperature conditions and signaling the unit fan and valve controls to operate within in preset limits to maintain occupant comfort. Figure 125 shows a basic two-pipe system package. Supply water is piped to the bottom of the coil to ensure that any air bubbles forming in the supply water will be transmitted to the upper level where they can be discharged from the system through the optional air vent on the return pipe immediately outside the coil. Shut off valves are located on both supply and return waterlines to enable the coil to be isolated during installation and maintenance.

Air Vent Port

Motorized 2-Way Valve

Shut Off Valve

Return

Coil

Supply Shut Off Valve

Drain Figure 125. 2-Pipe with 2-Way Valve and 2 Shut off Valves

Drain valves allow the coil to be drained during maintenance or removal.

Unions can be provided for the connection of the water coil to the supply and return water lines. Unions allow the water coil to be removed from the unit without cutting into the water lines and soldering them together during installation and maintenance.

A two-way water valve is used to adjust and balance the water flow into the coil to provide the specified amount of heat to the zone.

Pete’s Plugs provide the installer or maintenance technician a tool for connecting a pressure gage for reading the water pressure at the coil.

A valve motor operates on a signal from the room thermostat to adjust the water flow in response to space heating conditions.

Flow Control Valves are available as fixed or adjustable options. A fixed valve will be sized in accordance to the CV specified by the design engineer to provide the water flow required to meet the maximum load conditions required in the zone. This feature may save time during the initial start up. An adjustable valve must be commissioned at the jobsite during start up to limit the specified water flow to the coil. The adjustable feature does provide for future changes to match changes in load requirements.

The air vent allows air bubbles to escape the system for maximum heat transfer system performance. Optional control components, (Figure 126), are available to enhance the operations of the system or improve the process of installation and maintenance.

www.titus-hvac.com | www.titus-energysolutions.com

Comfort control for occupants in the space is regulated by a room thermostat and control valve package mounted on the unit water coil.

B

Automatic air vent ports keep the water supply system free of air build up on a continuous basis.

Flow Control Valve Adjustable - Option 1 & 2 Fixed - Option 3 & 4 Air Vent Port Automatic - Option A

Pete's Plug option B & C (2-pipe) Pete's Plug option D (4-pipe) Union option B (2-pipe) Union option D (4-pipe) Shut Off Valve With Memory Stop

Return Coil

Shut Off Valve

Motorized 2-Way Valve Y Strainer option A (2-pipe) Y Strainer option B (4-pipe)

Union option B (2-pipe) Union option D (4-pipe)

FAN COILS

Supply

Pete's Plug option A & C (2-pipe) Pete's Plug option D (4-pipe)

Figure 126. 2-Way Valve Component Options

B15


www.titus-hvac.com | www.titus-energysolutions.com

Controls and Valve Packages (continued)

FAN COILS

B

B16 B16

Engineering Guidelines - Fan Coils

A Motorized Water Valve can be provided. The motor will be operated in response to a signal from the zone thermostat to automatically reset the water flow to meet changing zone load requirements. A two-way valve controls water flow by opening or closing the flow control valve to the coil with a spring return. A three-way valve controls flow to the coil by bypassing excess water directly to the return pipe. The Y-Strainer option is installed in the supply water line ahead of the coil. It will remove sediment from the water supply before it can enter the coil and restrict water flow and reduce system performance. Manual Shut Off Valves are available with or without memory stops. The basic valve allows maintenance personal to shut off the flow of water to the coil at the unit. The optional memory stop lets the operator re-open the valve to it previous position without re-balancing. An Aquastat Switch can be installed in the water supply line and connected to the thermostat. Aquastats are most commonly used where there is a two-pipe system or supplemental electric heat. The Aquastat senses when the supply water is for heating or cooling. For a two-pipe system, if a zone thermostat is calling for heat and the supply water is cold, the thermostat will be locked out. For supplemental heat, the heat will be locked out when warm water is available in the supply lines.

THERMOSTAT The zone thermostat may be mounted on the fan coil unit, on the wall near the unit, or mounted on the wall or in the return duct away from the unit. Thermostats may be powered by a 24-volt power supply (with transformer) or by the same line voltage as the unit. Economically, if the thermostat is physically located more than 8 feet from the unit, line voltage is preferred. Each fan coil controls the room space temperature in response to a signal from the thermostat. The thermostat is programmed with cooling and heating set-point values as directed by the occupant or building manager. Typically, the zone thermostat provides a read out to tell the occupant what the set-point temperature is for the unit and what the temperature is the temperature in the space at present. Space temperature control is + or -1BF from the set point temperature. (Thermostats with an auto-changeover feature have a 4BF dead-band for switching.) Other thermostat features include a three-speed switch for the occupant to adjust the fan output volume, a manual changeover switch to change operation from cooling to heating conditions and an on/off switch to override the thermostat and shut the unit off as desired by the occupant.


References

Engineering Guidelines - Fan Coils

ASHRAE Handbook of Equipment ASHRAE Handbook of Fundamentals ASHRAE Handbook of Systems ASHRAE Standard 55-2010, “Thermal Comfort Conditions,” American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 2010. Bauman F., Et Al, “Air Movement, Ventilation, and Comfort in a Partitioned Office Space,” ASHRAE Transactions, Vol. 98, Pt. 1, 1992. Int-Hout, D., “Thermal Comfort Calculations/A Computer Model,” ASHRAE Transactions, Vol. 96, Pt. 1, 1990. Koestel, A., “Computing Temperature and Velocities in Vertical Jets of Hot or Cold Air,” ASHRAE Transactions, Vol. 60, p. 385, 1954. Miller, P.L. and Nash, R.T., “A Further Analysis of Room Air Distribution Performance,” ASHRAE Transactions, 1972. Nevins, Ralph C., “Air Diffusion Dynamics,” Theory, Design and Application, 1976. Straub, H.E., “Principles of Room Air Distribution, Heating,” Piping & Air Conditioning, April 1969. Straub, H.E., “What You Should Know About Room Air Distribution, Heating, Piping and Air Conditioning,” January 1962. Straub, H.E., “Room Air Distribution with a Variable Volume System,” presented at ASHRAE’s Annual Meeting, 1969.

TERMINAL UNITS AHRI 220-2007 “Reverberation Room Qualification and Testing Procedures for Determining Sound Power of HVAC Equipment” This standard provides the methodology for the determination of sound power levels of noise sources that emit broadband sound and/or discrete frequency sounds/Tones in reverberation rooms.

AHRI 880-2011 “Performance Rating of Air Terminals” The purpose of this standard is to establish for air terminals: definitions; classifications; test requirements; rating requirements; minimum data requirements for published ratings; marking and nameplate data and conformance conditions. This standard applies to air control devices used in air distribution systems.

This standard provides a consistent industry-accepted method for estimating sound pressure levels in a conditioned space for the application of air terminals and air outlets. Air terminals, air outlets, and the low pressure ductwork which connects them are considered sound sources and are the subjects of this standard. The method described in this standard can be used to identify acoustically critical paths in the system design. The design effects of inserting alternative components and changes in the system can be evaluated.

This standard applies to all reference sound sources (RSS’s) used in conjunction with AHRI sound rating standards and covers the one-third octave band frequency range from 50 to 10,000 Hz.

ANSI/AHRI 280-2008 “Requirements for the Qualification of Reverberation Rooms in the 63Hz Octave Band” This standard applies to products rated in the 63 Hz octave band (50, 63 and 80 Hz one-third octave bands) where the sound power is determined from measurements made in a reverberation room by using the comparison method as specified per ANSI Standard S12.51/ISO: 3741. ASHRAE Standard 130-2008 “Methods of Testing Air Terminal Units” First published in 1996 and reaffirmed in 2006, Standard 130 specifies instrumentation and facilities, test installation methods, and procedures for determining the capacity and related performance of constant-volume and variable-volume air terminal units. The standard is classified as an ASHRAE standard method of measurement. This revision of the standard includes updates and revisions to all parts of the standard, including its title, purpose, and scope. It updates definitions, adds modulating diffusers, redefines airflow sensor performance testing, and adds a method to determine the power factor. New appendices contain some material that was formerly in the body of the standard and some new reference material. This standard is required for compliance with AHRI Standard 880.

B

ACOUSTICS Gregerson, “Setting Sounder Standards for Acoustical Performance,” Building Design and Construction, p.58-60, April, 1992. Int-Hout, D., “Total Environmental Quality,” ASHRAE Transactions, Vol. 99, Pt. 1, 1993. Int-Hout, D., “The Use of Manufacturers’ Acoustical Data,” ASHRAE Transactions, Vol. 90, Pt. 2, 1986.

ANSI STANDARDS ANSI S12.32, “Precision Methods for the Determination of Sound Power Levels of Broadband Noise Sources in Reverberant Rooms.” This standard tells how to take the acoustic measurements in reverberant rooms, and is referenced as the method of test in both AHRI 880 and ASHRAE 130. Other ANSI standards referenced in this catalog are as follows: ANSI/ASHRAE 70 Method of testing for rating the performance of air outlets and inlets, Isothermal and cooling. Similar to ADC1062: GRD 84. It only shows the mounting for acoustical testing, referencing the following acoustical standard. ANSI S1.31 “Precision Methods for the Determination of Sound Power Levels of Broadband Noise Sources in Reverberant Rooms.” This tells how to take the acoustic measurements in ASHRAE Standard 70.

REFERENCES

AHRI 885-2008 “Procedure for Estimating Occupied Space Sound Levels in the Application of Air Terminals and Air Outlets”

ANSI/AHRI 250-2008 “Performance and Calibration of Reference Sound Sources”

www.titus-hvac.com | www.titus-energysolutions.com

GRILLES AND DIFFUSERS

B17


www.titus-hvac.com | www.titus-energysolutions.com

References (continued)

B

Engineering Guidelines - Fan Coils

AHRI STANDARDS AHRI Standards are typically developed for rating purposes. When an appropriate method of test does not exist, then AHRI Standardwill develop one. Otherwise, by agreement, they will reference an ASHRAE Standard method of test. AHRI STANDARD 880 The purpose of this standard is to establish definitions and classification: requirements for testing and rating; specifications, literature and advertising requirements; and conformance for air terminals. Appendix A is the method of test, which is expected to be replaced by ASHRAE Standard 130. AHRI STANDARD 885 This standard gives sound transmission losses through ceilings, effects of plenum, loss through ducts and all consideration of the sound paths to the space. With many items that affect the final sound, it gives a procedure to estimate what the space sound levels will be. AHRI Standard 885 “Procedure for Estimating Occupied Space Sound Levels in the Application of Air Terminals and Air Outlets” This standard gives sound transmission losses through ceilings, effects of plenum, loss through ducts and all consideration of the sound paths to the pace. With many items that affect the final sound, it gives a procedure to estimate what the space sound levels will be. This standard is unique among acoustical standards in that it provides the most current available acoustical application data for boxes and diffusers. Most of the data comes form ASHRAE sources, but some parts are unique to this standard, including a flexible duct attenuation table and a combined ceiling/plenum attenuation table. Unique and important AHRI Standard885 elements are listed in the Paths section of this manual. AHRI STANDARD 890 The Air Conditioning and Refrigeration Institute has recently developed a Certification Standard for Diffusers. It references the ASHRAE-70 Standard for the test method and specifies rating points and procedures. No diffusers are currently certified under this standard.

REFERENCES

ASHRAE STANDARDS

B18 B18

ASHRAE has developed, or is developing, consensus standards for testing both boxes and air outlets and inlets (GRDs). ASHRAE strives to provide current relevant testing standards which represent the best known data and methods available as consensus standards. ASHRAE Standards are submitted to American National Standards Institute (ANSI) and are usually adopted as ANSI standards as well. When applicable ANSI standards are available for part of ASHRAE Standards for both Boxes (130) and diffusers (70). ASHRAE 62 “Ventilation of Acceptable Indoor Air Quality.” The purpose of this standard is ‘to specify minimum ventilation rates and indoor air quality that will be acceptable to human occupants and are intended to avoid adverse health effects.’ This standard also specifies that energy conservation should be promoted and that comfort conditions should be maintained. Therefore the next two standards are listed to implement these requirements.

ASHRAE/IES STANDARD 90.1 “Energy Efficient Design of New Buildings Except Low Rise Residential Buildings.” ANSI/ASHRAE 55 “Thermal Environmental COnditions for Human Occupancy.” ASHRAE 113 “Method of Testing for Room Air Distribution.” This is a definitive method to determine ADPI in a space.

ISO STANDARDS ISO Standards are developed through a combination of committee members from several countries. One country is designated the “Secretariat” and is the lead in developing the standards assigned. The USA was the Secretariat for the two ISO Standards related to Boxes and GRDs. Other ISO Standards referenced in this catalog are as follows: ISO 5219 “Air distribution and air diffusion.” Laboratory aerodynamic testing and rating of air terminal devices. This was for GRDs. ISO 5220 “Air distribution and air diffusion.” Aerodynamic testing and rating of constant and variable dual or single duct boxes and single duct units. This standard is not in use at present in the U.S. It is very similar, however, to ASHRAE 130 and the AHRI 880, Appendix A procedures. ISO 5135 “Acoustics. Determination of sound power levels of noise from air terminal devices, high/low velocity/ pressure assemblies, dampers, and valves by measurement in a reverberation room.” All of the diagrams and methods shown in the ADC standards are shown in this standard. ISO 3741 “Acoustics. Determination of sound power levels of noise sources, and precision methods for broadband sources in reverberation rooms.” This explains actual measurements for the configurations given in ISO 5135. ISO 7244 “Air distribution and air diffusion.” Aerodynamic testing of dampers and valves.

ISO 7730 “Thermal comfort using the PMV/PPD single number rating.”


References (continued)

Engineering Guidelines - Fan Coils

ADC 1062 One of the original of standards dealing with testing and certifying registers, diffusers, dampers and terminals. Tests including pressures, throw, velocity and sound under isothermal conditions are included. Also included is a cooling test to correlate isothermal throw with room conditions as a room velocity. It tells how to set up, take readings, determine the number of readings and sizes to test, analyze, interpolate and report. The ADC 1062 Test Code has been supplanted by ASHRAE, ARI, ANSI and ISO procedures. At present, there are no ADC certified products or Certified Laboratories in the US.

www.titus-hvac.com | www.titus-energysolutions.com

OTHER STANDARDS

B

REFERENCES B19


www.titus-hvac.com | www.titus-energysolutions.com

Glossary

B

Engineering Guidelines - Fan Coils

Breakout - Sound which passes through the walls of a duct or device and is passed directly to an observer. Casing Radiated Sound - A type of Breakout Sound which passes through the walls of a device. In some cases, it includes induction port radiated sound as well. dBA - A single number rating of a broadband spectrum. Typically used to rate outdoor noise levels. Not practical for use in rating indoor sound levels as it bears little relevance to occupants’ needs.

Sound Pressure - The directly measurable fluctuation in pressure, heard as sound. The sound pressure is reported in dB (the log base 10 of the value), referenced to a pressure 0.0001 microbars. It is reported by frequency, typically in octave bands, although sometimes in 1/3 octave bands.

Discharge Sound - Airborne sound which is transmitted through ductwork from a noise source to an observer.

Space Effect - The calculated attenuation of a space which is different in each frequency band, and is a function of room volume and distance from the source.

End Reflection - The reduction in sound, typically in low frequencies only, resulting from a rapid change in the shape or size of a duct or a duct termination. Environmental Adjustment Factor (Environmental Effect) - A correction required to accurately use data obtained in accordance with AHRI Standard 880 (or the proposed ASHRAE 130), it corrects for a calibration difference between the Free Field calibration of the Reference Sound Source and the reverberant field in which it is used. GRD - Grilles, Registers and Diffusers. A grille is typically a device which directs air out of a duct nearly the same size as the opening. A register is a grille with a damper. A diffuser is usually different in size than the supply duct, and usually changes the direction of the air while mixing it with room air. These definitions are not always used as indicated. Incoherent Sound - Sound which is broadband and contains no repeating fluctuations. Induction Port Radiated Sound - That sound which passes out from the induction port of a VAV device. In practice it is impossible to differentiate from Casing Radiated sound, and is reported as a combined value under Casing Radiated sound levels. Insertion Loss - The reduction in sound resulting from inserting an attenuation device, such as a section of lined duct. The difference before and after the insertion of such a device is the insertion loss.

GLOSSARY

Multiple Outlet Effect - When an airstream is split, the sound traveling in the duct is also reduced, typically in proportion to the percent of airflow in each duct. The amount of reduction must be calculated logarithmically, not arithmetically, however.

B20

device. It is measured indirectly by one of several methods. It is reported as dB (the log base 10 of the value) referenced to a base power level, typically 10-12 watts. It is reported by frequency, typically in octave bands, although sometimes in 1/3 octave bands.

Pure Tone - A sound spectrum which is very concentrated in a narrow band. Radiated Sound - Sound which travels from the source to the observer in a direct path, outside ductwork. Room Effect - Typically a 10 dB reduction in all bands, this is the assumed value for attenuation of a room. In practice, it is reasonable for diffusers which peak in the mid-frequencies, but not necessarily for VAV terminals, which peak in lower frequencies. Sound Power - The energy released as acoustic energy by a

Terminals (Boxes) - Devices which vary the flow through a duct with a moveable damper. They typically have a control device to vary the flow in response to a control signal. In some cases, the term terminals can also mean boxes and GRDs. In those cases, “Boxes” are referred to as Air Control Devices (ACDs). The terminology is inconsistent throughout the industry.


Engineering Guidelines Index

Engineering Guidelines - Fan Coils

C Coils and Coil Design.......................................................... B11 Controls and Valve Packages.............................................. B15 D Dew Point Temperature...................................................... B10 Dry Air.................................................................................. B10 Dry-bulb Temperature (DBT)................................................. B10 E Enthalpy (H)........................................................................ B11 Expansion Loops................................................................... B14 F Fan Coils............................................................................... B4 H Heat Transfer........................................................................ High Output Series Fan Coils............................................... Horizontal Basic Fan Coils.................................................... Hydronic (Fan Coil) Systems.................................................

T Thermostat......................................................................... B16 V Vertical Basic Fan Coils.......................................................... B6 Vertical Stack Fan Coils........................................................ B4 Vertical Stack Risers........................................................... B13 W Wet-bulb Temperature (DBT)................................................ B10

www.titus-hvac.com | www.titus-energysolutions.com

A Absolute Humidity.............................................................. B10 ANSI Standards.................................................................. B17 AHRI Standards.................................................................. B17 Aquastat............................................................................... B16 ASHARE 70-2006............................................................... B17 ASHRAE Standards............................................................ B17 Atmospheric Air.................................................................... B10

B

B8 B7 B5 B8

I ISO...................................................................................... B18 L Latent Cooling (Qlat).......................................................... B11 Latent (Qlat)........................................................................ B11 M Moist Air............................................................................. B10 P Properties of Coils and Coil Design...................................... B12 Psychometrics.................................................................... B10

S Sensible Heating (Qsen)....................................................... B7 Sound Power Level............................................................... B8 Sound Pressure Level........................................................... B8 Specific Volume (Spv)......................................................... B11 Status Point.......................................................................... B11

INDEX

R Relative Humidity (RH)....................................................... B10 Riser Sizing......................................................................... B13 Room Load Calculations....................................................... B9

B21


Notes

Engineering Guidelines - Fan Coils


chilled beam

U www.titus-hvac.com | www.titus-energysolutions.com


www.titus-hvac.com | www.titus-energysolutions.com

Table of Contents

U

Chilled Beam

chilled beam products Chilled Beam Products...................................................................................................................................................................U3

overview Overview.........................................................................................................................................................................................U5 Application Guide...........................................................................................................................................................................U6 Introduction............................................................................................................................................................................U6 History.....................................................................................................................................................................................U6 Theoretical Background..........................................................................................................................................................U7 Benefits of Chilled Ceiling Systems........................................................................................................................................U9 Chilled Ceiling System Design..............................................................................................................................................U10 System Design Process.........................................................................................................................................................U12

linear active chilled beams DISA..............................................................................................................................................................................................U18 Dimensions...........................................................................................................................................................................U21 Performance Data.................................................................................................................................................................U29 DISA-V..........................................................................................................................................................................................U35 Dimensions...........................................................................................................................................................................U37 Performance Data.................................................................................................................................................................U39 Suggested Specifications [DISA, DISA-V].............................................................................................................................U40 LCBS.............................................................................................................................................................................................U43 Dimensions...........................................................................................................................................................................U45 Performance Data.................................................................................................................................................................U47 Suggested Specifications......................................................................................................................................................U49

thermal comfort modules TCM2............................................................................................................................................................................................U51 Dimensions...........................................................................................................................................................................U53 Performance Data.................................................................................................................................................................U55 Suggested Specifications......................................................................................................................................................U57

linear passive chilled beams

CHILLED BEAM

SPB...............................................................................................................................................................................................U59 Dimensions...........................................................................................................................................................................U61 Performance Data.................................................................................................................................................................U63 Suggested Specifications......................................................................................................................................................U66

radiant ceiling products Alpety FKL, HKL............................................................................................................................................................................U67 Dimensions...........................................................................................................................................................................U68 Performance Data.................................................................................................................................................................U69 Alpety SKS....................................................................................................................................................................................U71 Dimensions...........................................................................................................................................................................U72 Suggested Specifications [Alpety FKL, HKL, & SKS..............................................................................................................U73

U2 Titus by Schako


Chilled Beam

Chilled Beam Products

DISA

DISA-V

LCBS

ACTIVE CHILLED BEAM DIFFUSER

SIDEWALL CHILLED BEAM DIFFUSER

ACTIVE CHILLED BEAM DIFFUSER

• 1-way or 2-way throw pattern that is available in variable lengths. • For use in heating or cooling applications and perfect for open office environments.

• Horizontal throw pattern that is available in variable lengths. • For use in heating or cooling applications in either a 2-pipe or 4-pipe system.

• 1-way throw pattern that is available in a fixed length at 4 feet. • Available with a dew-point safety pan.

www.titus-hvac.com | www.titus-energysolutions.com

LINEAR ACTIVE CHILLED BEAMS

pages: U14-U45

U THERMAL COMFORT MODULES

pages: U47-U53

TCM2 • • • •

CHILLED BEAM

MODULAR ACTIVE CHILLED BEAM 4-way throw pattern similar to a traditional ceiling diffuser. Works well in heating & cooling applications. Modular design provides the highest level of comfort in the occupied space. Available with a dew-point safety pan.

U3 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

Chilled Beam Products (continued)

LINEAR PASSIVE CHILLED BEAMS

pages: U55-U62

SPB PASSIVE CHILLED BEAM • Available in a variety of lengths. • Produces low noise levels. • Product can be mounted flush with the ceiling or suspended below the ceiling for exposed applications.

U RADIANT CEILING PRODUCTS

CHILLED BEAM

pages: U63-U69

ALPETY FKL

ALPETY HKL

ALPETY SKS

RADIANT CEILING SYSTEMS

RADIANT CEILING SYSTEMS

RADIANT CEILING SYSTEMS

• Water driven. • Low energy consumption and noise levels. • Creates a high degree of thermal comfort through draft free cooling and even temperature distribution in the space.

• Water driven. • Low energy consumption and noise levels. • Creates a high degree of thermal comfort through draft free cooling and even temperature distribution in the space.

• Water driven. • Low energy consumption and noise levels. • Creates a high degree of thermal comfort through draft free cooling and even temperature distribution in the space.

U4 Titus by Schako


Overview

The chilled ceiling products provide sensible cooling and heating to the space by utilizing the more efficient heat transfer capacity of water, as opposed to air. This decouples the latent and sensible loads, reducing the energy cost of sensible cooling. With passive beams and radiant products, an additional system is necessary to meet the ventilation and latent cooling needs of the space. The Titus active chilled beams integrate the supply of ventilation air creating an active diffuser. Using the ventilation air to pressurize a plenum with aerodynamically designed nozzles, high velocity jets of air are created forcing induction of room air over the water coils integral to the units. Forced induction dramatically improves the heating and cooling capacity over passive beams and radiant products. Titus active chilled

beams harness the energy of the supply air to further reduce total energy consumption. Titus offers a chilled ceiling product to meet the requirements of any design or installation. Just a single model of passive beam accommodates both exposed and recessed mounting applications. Active chilled beams are available in 1, 2, and 4-way throw patterns. There is even a model for high sidewall applications. In addition to the variety of product solutions available, the appearance of the units can be customized through standard options, which enables seamless integration into any architectural style, traditional or contemporary.

www.titus-hvac.com | www.titus-energysolutions.com

The Titus chilled ceiling product line is comprised of chilled beams, both active and passive, radiant ceiling panels, and radiant sails. These products offer optimized performance and provide high levels of thermal comfort for the occupant. In addition to increased occupancy comfort, use of the chilled ceiling products reduce the amount of energy required to heat and cool a building.

Chilled Beam

U

CHILLED BEAM U5 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

APPLICATION GUIDE

U

Introduction Chilled ceiling systems consist of three main product types: active chilled beams, passive chilled beams, and radiant ceiling panels/sails. Even though these units are commonly referred to as “chilled” products they are also effectively used for both cooling and heating. Both active and passive beams utilize water coils to provide sensible cooling, reducing the total load that must be addressed through the building’s air handlers. Since chilled beams provide sensible only cooling they are best suited for spaces with low to moderate latent loads. This offers considerable potential for energy savings due to the volumetric heat transfer capacity of water and trade-off between fan energy and pumping power.

Radiant ceilings systems emit heating and cooling by both convection and radiation. During cooling, ambient air near the ceiling cools and falls to the occupied area, due to its higher density. The ceiling panels emit cooling and heating to the surrounding surfaces in the area by radiation. Radiant heat transfer typically results in high thermal comfort since the ambient temperature will feel 2.5BF to 5BF cooler/ warmer than actual room temperature. This effect has the advantage that the room requires less conditioning than a traditional system, introducing an additional opportunity for energy savings.

Passive beams consist of a water coil and an enclosure. The enclosure is primarily cosmetic, but helps to maintain even heat transfer across the coil. Passive beams provide cooling primarily through convective heat transfer. A convection current is created where higher density cool air sinks into the space, inducing warm low density air at the ceiling level through the coil. When using passive beams ventilation air must be introduced to the space either through natural or mechanical means.

History

APPLICATION GUIDE

Modern chilled ceiling systems, more specifically active chilled beams, got their start in the 1920s when Willis Carrier began to develop the concepts for under-sill induction units. Patents were applied for and first installations of these units were completed in 1940. The use of an air-water terminal located in the space was an important advance in and of itself; however, these systems solidified the advantages of an air-water system over an all-air system.

U6

Incorporating supply air into a beam creates an active diffuser. Ventilation air pressurizes a plenum and the aerodynamically designed jets induce room air over water coils. Forced induction dramatically increases the heating and cooling capacity per square foot, compared to passive beams and radiant products. Active chilled beams harness the energy of the supply air to further reduce total energy consumption.

• Water is much more efficient heat transfer medium than air. • Reduced duct size required to only supply ventilation air increased usable space, and reduced the material cost and installation time. Scandinavian engineers, during the mid-1970’s, adapted this technology along with radiant heating/cooling panels for overhead applications to work with new buildings designed to utilize natural ventilation. The result of their efforts was the passive chilled beam. In regions where using natural ventilation was not effective, engineers integrated the mechanical ventilation into chilled beam. Utilizing the same principles used in the under-sill induction boxes, the active chilled beam was developed.


Chilled Beam

APPLICATION GUIDE

HEAT TRANSFER

ASHRAE defines heat transfer as “the flow of heat energy induced by a temperature difference.” Thermal energy can be transferred or be affected by: • Conduction • Convection • Radiation • Humidity Thermal conduction is the mechanism of heat transfer by the transfer of kinetic energy between particles or groups of particles at the atomic level. With solid bodies, such as with an air jet near a window, thermal conduction dominates only very close to the solid surface. Thermal convection is the transfer by eddy mixing and diffusion in addition to conduction. The transfer of fluid currents produced by external sources, such as by a blower, is called forced convection. When the fluid air movement is caused by the difference in density and the action of gravity, it is called natural convection. Natural convection is very active near windows and near heat sources in the occupied spaces. The colder air falls and the warmer air rises. Radiant heat transfer takes place through matter. It is a change in energy form, from internal energy at the source to electromagnetic energy for transmission, then back to internal energy at the receiver. Examples of radiation are sunshine through the air and window to the inside floor or ceiling light to occupants and to the floor. All of these methods of heat transfer effect a person’s comfort reaction. In addition, humidity has some effect caused by a change in evaporation rate from the body.

Heat loss is measured in “BTU” which is the amount of heat required to raise 1 lb. of water 1BF. Coefficients used to estimate the value of the heat loss include: • ‘K’ Factor: amount of heat transferred in 1 hour through 1 sq. ft. of material, 1” thick at 1BF of temperature difference.

Equation 1: For a structure with multiple skin materials, the total heat transmission can be calculated as: U = 1/(R1 + R2 + …..Rn) For hydronic heating and cooling systems heat is removed from the occupied space (cooling) or added to the occupied space (heating) via a closed loop water system. Return air from the space passes across a fin tube coil.

PSYCHROMETRICS

One of the four major elements of thermal energy and comfort is humidity. Psychrometrics uses thermodynamics properties to analyze conditions and processes involving moist air. A detailed study of psychrometrics can be found in Chapter 1 of ASHRAE 2009 Fundamentals Handbook. This section is a summary of how knowledge of psychrometrics can be used to maximize space comfort and system performance.

U

Atmospheric Air (the air that you breathe), contains many gaseous components including water vapor and containments. Dry Air is atmospheric air with all moisture removed and is used only as a point of reference. Moist Air is a combination of dry air and water vapor and can be considered equal to atmospheric air for this discussion. A psychrometric chart (FIGURE 4) is a graphical representation of the thermodynamic properties of moist air. There are several charts available to cover all common conditions. The one shown here is taken from ASHRAE Fundamentals Handbook, Chapter 1 and illustrates conditions of 32 to 100BF at sea level. The Dry-bulb Temperature (DBT), is the temperature measured using a standard thermometer. Dry-bulb is also known as the sensible temperature. The Wet-bulb Temperature (WBT), is the temperature measured using a ‘wetted’ thermometer. Wet-bulb is used to determine the moisture content of air. The Absolute Humidity (AH), is the vapor content of air. It is described in terms of moisture per lb of dry air or grains of moisture per lb. of dry air. AH is also referred to as ‘moisture content’ or ‘humidity ratio.’ There are 7000 grains in a lb. of water. The Relative Humidity (RH), is the vapor content of air. It is described as the percentage of saturation humidity at the

APPLICATION GUIGE

Heat transfer is also affected by the following factors: • A greater temperature difference will result in a greater amount of heat transfer. • The amount of surface area is directly proportional to the amount of heat transfer. • The amount of time is also directly proportional to the amount of heat transfer. • The thermal resistance of the material use affects the rate of heat transfer.

• ‘C’ Factor: amount of heat transferred in 1 hour through 1 sq. ft. of material through the specified thickness of the material used. • ‘R’ Value: resistance to heat transfer, measured as the reciprocal of conductance (1/K or 1/C). • ‘U’ Value: designates the overall transmission of heat in 1 hour per sq. ft. of area for the difference of 1BF across specified material. • Conductance of individual materials is not directly applicable to the heat loss calculation. First, it must be converted to the ‘R’ value, which is (1/K or 1/C).

www.titus-hvac.com | www.titus-energysolutions.com

Theoretical Background

U7


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

APPLICATION GUIDE same temperature (%). The goal for optimum space comfort is 30-35% for heating conditions, and 45-60% for cooling conditions. Saturation humidity is the maximum vapor content (lb./lb.) per lb. dry air that air can hold at a fixed temperature.

increase in specific volume. The Enthalpy (H) is the heat content of air. Enthalpy is also known as the total heat of air. Enthalpy is defendant on the wet-bulb temperature of air. It is described in terms of Btu’s per lb. dry air (Btu/lb.).

The Dew Point Temperature (DPT), is the temperature at which vapor begins to fall out of air to form condensation. DPT is the temperature at which a state of saturation humidity occurs, or 100% RH. It is also known as the saturation temperature.

A Status Point is a location on the psychrometric chart defined by any two psychrometric properties. A hydrometer or psychrometer is commonly used to define a status point. At 100% RH the wet-bulb will equal the dry-bulb temperature. As the temperature difference between temperatures increases, the RH will decrease.

The Specific Volume (Spv), is the reciprocal of air density which is described in terms of cubic feet per lb of dry air (cu ft/lb.). An increase in air temperature will result in a decrease in density and an increase in volume. A decrease in atmospheric pressure also decreased air density while increasing volume. At 5000 feet above sea level, density is decreased by 17%. Higher altitudes require larger motors and blowers to move the same effective mass, due to the

To locate a status-point, find the dry-bulb temperature on the bottom of the psychrometric chart. Follow this line upward until it intersects with the wet-bulb temperature from the left side of the chart.

U

55

60

90

50

.028

Sensible Heat Ratio 1.0

:

1.0

5000

0.6 0.5

Sensible Heat Total Heat

Qs Qt

3000

0.4

-1

2.0 4 8.0.0 : -48.0 -2 .0 .0

85

-2000 -1000

15.0

0.8

:

85

20

00

0.1

.5 -0 .4 -0 3 -0.

00

-0.1

15

tB ulb

.024

Te

mp

55

era t

ure

40

, °F

.022

80

1000 Enthalpy Humidity Ratio

We

80

50

-0.2

0.2

0.

3

.0

0

.026

45

0

0

Dh DW

60

.020

75

35

50 14.5

.018

ra tu re ,

nd

pe

ou

m

rP

Te

pe

tio

n

tu

Sa

Dry Bulb Temperature, °F

20%

10

15

105

100

95

90

85

80

75

Humidity 70

65

60

55

50

45

40

35

12.5

10% Relative

20 Enthalpy - Btu per Pound of Dry Air

U8

Figure 4. Psyochrometric Chart

.010

40

.008

.006

35 .004

.002

115

30%

110

40%

40

35

ir

50%

45

ry A .D

35

50

% 60

13.5

45 40

er lb

55

ft. p

% 70 50

Humidity Ratio - Pounds Moisture per Pound Dry Air

cu.

60

120

80

55

e-

lum

Vo

%

20

.012

65

% 90

14.0

60

15

45

tu

25

13.0

APPLICATION GUIDE

.014

ra

-B y lp

70 65

En

th a

.016

°F

30

of

D

ry

A

ir

75

70

30


Chilled Beam

APPLICATION GUIDE

When will condensation occur? To determine if a supply air duct or air outlet device will form condensation on the surface: First, using the R-value of any thermal barrier, determine the minimum surface temperature. Next, determine the DPT of the atmospheric air in contact with the surface. If the surface temperature is equal or lower than the DPT, the surface will form condensation. If yes, an additional thermal barrier or other condensation prevention strategies may be required to solve the problem. Sensible heating (Qsen), is the heat that raises the dry-bulb temperature of air without increasing the moisture content. Because we can easily sense this change in temperature, it is called ‘sensible.’ Sensible cooling is the removal of heat without removing moisture content of the air. Latent Heat (Qlat), is the heat content of air due to the presence of water vapor. Latent heat is the heat required to evaporate this same amount of water (970 Btu/lb), also known as the latent heat of vaporization. As latent heat increases, moisture content increases. Water can be heated to 212BF. If more heat is added, the water will vaporize but the temperature will not change. Latent Cooling (Qlat), is the removal of latent eat from air without lowering the dry-bulb temperature. To retrieve 1 lb. of condensate, 970 Btu’s would need to be removed. As latent heat decreased, moisture content decreases.\

Sensible processes can be shown as horizontal paths on a psychrometric chart. Latent processes can be shown as vertical paths on a psychrometric chart. Most processes include both, resulting in an angled or diagonal path. Sensible heat factor (SHF) is the measure of sensible heat to latent heat. Sensible heating only is 1.0. Equal proportions result in 0.5. SHF is generally higher than 0.5 because of the cooling processes that remove more sensible heat than latent heat.

INDUCTION

Induction is a flow that occurs as a result of the change in velocity pressure as a jet of air expands. The principals of induced air flow are based on the Venturi effect. The

Benefits of Chilled Ceiling Systems Chilled Ceiling Systems are designed to provide superior occupancy comfort. These systems require less energy to operate, operate more efficiently, and use less materials than conventional all air systems. Tempered and dehumidified air is supplied to the space to meet ventilation requirements and to handle the latent load. The majority of the sensible load is addressed with the chilled ceiling products. Decoupling the latent and sensible loads takes advantage of the superior volumetric heat capacity of water. The reduced volume of air that must be delivered to the space results in reduced air handler capacity and size, smaller duct sizes, and overall energy savings. A higher supply temperature contributes to increased occupancy comfort.

U

FIRST COST BENEFITS:

• Shallow unit profiles allow for reduced ceiling space requirements; typically require 60% less vertical space than conventional all air systems. "" Reduced slab to slab spacing; reducing material costs per floor. "" Easily integrated into retrofit applications where space is limited. • Low volume of supply air required for active beams enables reduction of the total amount of air processed at the air-handler by an all air system up to 50%. "" Reduced air-handler size/ capacity, and duct work size

COMFORT AND IAQ BENEFITS:

• Active beams typically supply a constant volume of primary air, decreasing occurrences of dumping and changes to the air motion in the space; issues common to typical VAV systems. • When supplied with primary air from a dedicated outside air system (DOAS) 100% fresh air is supplied to the space. • Dry-coil sensible cooling, eliminates bacterial, fungal, or mold growth associated with fan coils and other unitary products with condensing coils. • Constant primary air volume ensures ventilation requirements are met and helps to maintain relative humidity levels in the space.

APPLICATION GUIGE

Latent Heat of Fusion is the heat required to change a liquid into a solid (144 Btu/lb. Water can be cooled to 32BF. If more heat is removed, it will cause ice to form. To retrieve 1 lb of water from ice, 144 Btu’s must be added.

Venturi effect is a derivation of Bernoulli’s principle and the continuity laws. In order to satisfy the fluid dynamic principles of continuity, a fluid’s velocity must decrease as the flow expands; at the same time the static pressure of the flow must increase. The increase in static pressure balances the decreased velocity, thus maintaining the principles of conservation.

www.titus-hvac.com | www.titus-energysolutions.com

From the ‘status point’ you can locate: • Absolute Humidity (AH) • Relative Humidity (RH) • Dew Point Temperature (DPT) • Specific Volume (Spv)

ENERGY EFFICIENCY AND OPERATIONAL BENEFITS: • Utilizing the heat transfer capacity of water also takes advantage of the superior operational efficiency of pumps as compared to fans.

U9


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

APPLICATION GUIDE

U

"" A 1-inch diameter pipe can deliver the same cooling/heating capacity as an 18-inch x 18-inch duct "" Reduction of fan energy by a factor of 7 to deliver the same cooling to the space. • Higher supply water temperatures compared to conventional systems allow for use of water side economizers. "" Increased opportunities for free-cooling. • Significant reduction in maintenance costs and labor as compared to conventional all air systems "" No moving parts - no blowers, motors, damper actuators to replace "" Dry-coil operation - does not require regular cleaning and disinfecting of condensate pans "" Recommend cleaning of coils once every 4 to 5 years, more frequently in hospitality rooms where linens are frequently changed (i.e. hospital patient rooms and hotel rooms).

Chilled Ceiling System Design CHILLED CEILING APPLICATIONS

APPLICATION GUIDE

Chilled beam and radiant ceiling products are designed to handle high thermal loads in the space. They are also an effective solution in spaces where individual temperature control is desired. Ideal applications are spaces where the sensible heat ratio is greater than 0.75, meaning that 75% or more of the total heat gains in the space are sensible gains. These locations include computer/server rooms, condos/apartments/hotel guest rooms, libraries, and museums.

U10

Use of chilled ceiling systems should be limited to applications where cooling loads are less than 40 BTUH/ ft2, and heating loads are lower than 15 BTUH/ft2. More specifically, passive beam and radiant panel usage should be limited to applications where cooling loads are no more than 25 BTUH/ft2, and active chilled beams are not recommended for use when cooling loads are more than 40 BTUH/ft2. Chilled ceiling systems are not recommended in these applications since addressing the loads will likely create thermal comfort issues. In transitional spaces where thermal comfort is not critical, chilled ceiling products can be used to address higher loads. Chilled beams and radiant ceiling systems should not be applied in buildings where relative humidity of the space is not easily maintained. This would include retrofit applications, lobbies, and entrances where there is excessive infiltration. Chilled beams are best applied when installed no higher than 14 feet above the floor, but can remain effective with installation heights up to 20 feet. When installed above these heights it is difficult to effectively get heating and cooling into the occupied space.

PRACTICAL DESIGN GUIDELINES

There are guidelines that should be followed when considering a chilled ceiling system to ensure the design will create a comfortable environment for occupants and result in optimum energy efficiency. The system should be designed to meet only the heating and cooling requirements of the actual space. Overdesigning the system will increase the cost of the project, and potentially result in decreased comfort. Primary air must be adequately dehumidified, and supplied at a flow rate large enough to offset the latent loads of the space. This flow rate must also be high enough to meet the ventilation requirements outlined in ASHRAE standard 62.1. When heating with chilled beams and radiant panels, care must be taken that the system is not oversized for heating. Entering water temperatures should be as low as possible to meet the heating requirements, and should never be over 140BF. Condensation control strategies must be implemented to maintain optimum operating conditions, prevent bacterial, mold, and fungus growth, ensure damage to building does not occur. When designing a chilled beam system it is best to limit the types and configurations of products used. This will help to make logistics during installation and building maintenance easier. Room air temperature is maintained through regulation of 2-way control valves. Use of 2-way valves is preferred as they will minimize pumping costs. Systems should be designed to take full advantage of free cooling and heating opportunities through economizers and heat recovery devices. Chilled beams and radiant panels are highly efficient products and offer energy savings over traditional systems. However, one of the biggest advantages these products offer is the additional energy savings that can be achieved in the rest of the system due to the unit operating conditions.

DESIGN METHODOLOGY

The design of chilled ceiling systems is an iterative process between selection of the equipment to be used and the inlet conditions for the system. This also includes placement/ orientation. The iterative process enables the inlet conditions to be optimized so that the design results in a comfortable space for the occupant, and that the equipment is operating with the highest efficiency possible. This is true for all chilled ceiling systems, but is especially true for active chilled beams. Equipment selection is based on the following items and must be balanced for creating an effective, efficient, and comfortable system:


Chilled Beam

APPLICATION GUIDE

- Cooling design temperature – DB/WB - Heating design temperature – DB Indoor air quality requirements - Required ventilation flow rate - Define allowable humidity level in the space - Calculate expected infiltration - Supply air temperature – DB/WB - Verify supply air flow rate meets requirements to handle latent loads Calculation of required heating and cooling capacity - Calculation of heat loads - Calculation of heat losses - Calculate cooling introduced from supply air Adjustment to building design parameters - Decrease external loads and losses; improved solar shading and window construction - Improve window and building structure to decrease infiltration

Product selection: type, length, configuration, and design parameters Chilled Ceiling Product Selection - Active Chilled Beam - Passive Chilled Beam + supply air system - Radiant Panels + supply air system

www.titus-hvac.com | www.titus-energysolutions.com

Space design conditions

Define room design temperature

U

Entering Water Temperature - Selected to ensure condensation prevention Selection of other entering water conditions - Mean Coil Temperature to room design temperature difference - Water flow rate - Maintaining acceptable coil pressure drop - Ensure turbulent flow conditions Select product size and configuration - Beam/Panel size - Configuration/throw pattern - Unit cooling/heating capacities - Supply air flow rate/operating pressure - Check for occupancy comfort

Product noise level and system operating pressure

Room air control - Temperature control by regulating water flow rate - 2-Way valves; on/off or proportional control - Constant supply air flow; possible unoccupied set back Air and water distribution - Supply air dehumidification - Entering water temperature control - Economizers: air and water

APPLICATION GUIGE

Design of room controls, water and air distribution, and BMS systems

Building Management system - Condensation prevention strategies - Occupied/Unoccupied modes - Daily start up

Figure 5. Chilled Ceiling Design Methdology

U11


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

APPLICATION GUIDE

APPLICATION GUIDE

U

• Total unit capacity "" Size of units "" Quantity of units "" Unit Configuration • Supply Air "" Flow rate "" Temperature "" Relative humidity "" Operating pressure • Entering Water Conditions (cooling & heating) "" Entering water temperature "" Flow rate "" Coil pressure drop • Unit Placement "" Throw patterns "" Throw length • Noise Once the inlet conditions and equipment has been selected, the controls for the system are selected. The room control system must be designed to deliver the selected inlet parameters and maintain the energy efficiency of the design. The critical points to be maintained are the entering water conditions as well as the supply air conditions. After control of the critical points has been established, additional controls to compensate for changes in space dew point temperature and occupancy should be considered through a building management system. This methodology is depicted in Figure 5, Chilled Ceiling Design Methodology.

System Design Process U12

SPACE DESIGN CONDITIONS

The first step in determining the space design conditions is to define the design temperatures for both heating and

cooling. This should be done by following the guidelines set in ASHRAE Standard 55 and the chapters on heating and cooling loads in the ASHRAE Fundamentals Handbook. Once the design temperatures have been defined, an iterative process should be used to determine the indoor air quality requirements, calculating the required capacities to address the heating/cooling loads, and adjusting the building design/construction (if applicable). The indoor air quality (IAQ) requirements include supply air flow rate, to meet both ventilation requirements and address the latent loads in the space, determining infiltration, and defining the maximum allowable humidity level. Based on the building design and construction, anticipated infiltration should be calculated. Information on how to calculate infiltration and how to use infiltration when calculating heat loads and losses can be found in the ASHRAE Fundamentals Handbook. The heat loads and losses calculated associated with infiltration are used in determining the latent cooling requirements. This will affect the volume of supply air necessary to maintain the design humidity levels in the room. Guidelines for determining the minimum ventilation requirements are given in ASHRAE Standard 62.1. Criteria for maximum relative humidity in the space, based on a humidity ratio of 0.012, is set in ASHRAE Standard 55; for a room design temperature of 75BF, the maximum relative humidity is 63.5%. Once the design conditions for room relative humidity have been determined the supply air flow rate necessary to maintain this level can be calculated. The required flow rate to meet the latent load can be determined by the following equation on the next page:


APPLICATION GUIDE

. V = the volumetric flow rate, CFM . q = latent heat gain in the space, BTU/H HRr = room air humidity ratio, lbs water/lbs dry air HRp = primary air humidity ratio, lbs water/lbs dry air It follows that the required flow rate to maintain control of the humidity will rapidly increase as the difference between the room air and primary air humidity ratios decrease. As a result, designs seeking to maintain relatively low humidity ratios will need a high primary flow rate if the dew point temperature of the supply air is close to the design dew point in the room. Comparing the required supply airflow rates for ventilation and to maintain the relative humidity of the space, the higher of the two flow rates will determine the minimum flow rate allowable for the space. If necessary the supply air flow rate can be increased to supplement the sensible cooling of the products selected. After the IAQ requirements have been tentatively set, the required equipment capacities to meet the heat loads and losses can are determined. Care should be taken to design around actual loads/losses that will be experienced in the space. Overdesigning the system will increase installation and equipment costs, and could potentially cause thermal comfort issues. Once the capacity requirements have been calculated, either supply air conditions or building design/ construction (if possible) can be adjusted to be more suited to chilled ceiling application.

PRODUCT SELECTION

The type of product to be used to is at the designer’s discretion. However the recommended limitations of maximum capacity per square foot should not be exceeded where high levels of thermal comfort are required.

There are several ways to operate these products to prevent condensation. The primary step to preventing condensation is for the chilled water design supply temperature to be at least 1BF above the dew-point temperature of the space. Also, the supply air to the space must also be sufficiently dehumidified to maintain the design relative humidity conditions. The secondary measures are noted below:

At this time the supply air temperature should be tentatively selected. Supply air temperature can be varied between cooling and heating, but most designs keep a fixed temperature as long as heating requirements can be met. The size and configuration of products selected should be completed while adjusting the following parameters: • Water flow rate: this should be selected to minimize pressure drop, should be no higher 10 ft w.g., while maintaining turbulent flow through the product. • Supply airflow rate: flow rate must be maintained above the minimum determined for IAQ requirements, but can be increased to offset the sensible cooling requirements of the product selected "" Increasing the flow rate in active beams while maintaining the same nozzle geometry will result in an increase of operating pressure. The recommended operating range is typically between 0.2 in w.g. and 0.8 in w.g. Operating pressure in active beams will also directly impact the noise generated by the product during operation. • Unit placement/Configurations: "" Radiant panels and sails: These products should be installed so that no more than 75% of the available ceiling space is made up of active panels/ sails. Panels models with perforated faces and backed with acoustic fleece insulation can be used to improve noise attenuation within the space. "" Passive Beams: Passive beams should not be installed directly above occupants since the highest velocities occurring from the convection process will occur directly underneath the beam. "" It is critical to the operation of passive beams that adequate space is provided for air flow through the beam. When installed in a flush mount application, shadow gaps, perforated ceiling tiles, dummy beams, or return air grilles must be installed so that warm room air enter the air path for the passive beams. It is recommended that the total free area for the return air path be at least 50% of the passive beam surface area. In exposed applications, the beams should be installed with a minimum distance between the top surface of the beam and the ceiling that is equivalent to half of the beam width, see Figure 7.

U

APPLICATION GUIGE

Once product type has been decided the entering water temperature should be selected such that condensation is prevented. The majority of chilled ceiling products do not include a means to collect or manage condensation. This means the temperature of the heat transfer surface, either water coil or panel/sail surface, must be higher than the dew-point temperature of the space to prevent the formation of condensation. However, to achieve the maximum cooling capacity the entering water temperature should be as low as possible. This can be difficult when trying to get the most capacity out of chilled ceiling products.

• Properly insulated valves and piping • Measures used to shut off chilled water flow "" Condensation sensors installed on the supply water piping "" Relative humidity/dew-point temperature sensor installed in the return air path • Raising the chilled water supply temperature "" Using a relative humidity sensor in conjunction with a room temperature system to determine moisture content and dew-point temperature of the space. Using this information the chilled water temperature can be adjusted upward to prevent condensation. This measure should only be used in the event that an entire building is at risk for condensation.

www.titus-hvac.com | www.titus-energysolutions.com

. . V = q ./. [4840 x (HRr - HRp)]

Chilled Beam

U13


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

APPLICATION GUIDE

Figure 6a. Condensation Prevention Strategies Thermostat/Room Controller

2-Way Flow Control Valves (On/Off or Proportional Control)

Balancing Valves (Manual or Automatic)

Condesate Sensors

Chilled Beams

A) Condensate sensors installed on the chilled water supply shut down individual flow control valves when condesnation is detected.

U

Thermostat/Room Controller Balancing Valves (Manual or Automatic)

2-Way Flow Control Valves (On/Off or Proportional Control)

Figure 6b. Condensation Prevention Strategies

Relative Humidity Sensor

Chilled Beams

B) Relative humidity sensor installed in return air path to shut down zone flow control valve when relative humidty reaches set point of the sensor.

3-Way Flow Control Valve (Proportional Control)

APPLICATION GUIDE

Variable speed pump

Balancing Valves (Manual or Automatic)

Thermostat/ Room Controller w/ Dew-point Sensor

Chilled Beams

U14

C) Use of a 3-way proportional valve and variable speed pump to raise supply water temperature above the room dew-point temperature.

Figure 6c. Condensation Prevention Strategies


Chilled Beam

APPLICATION GUIDE

X/2

X

Passive beams should be mounted such that the return air path is not restricted.

Figure 7. Passive beam mounting height "" Active Beams: With the different configurations available in active beams, 1, 2, and 4-way beams a design can be implemented to effectively create a comfortable space. In open office spaces as well as internal offices 2-way or 4-way beams are typically used. The flexibility provided by 2-way and 4-way beams, due to multiple sizes and nozzle configurations, allow them to be appropriately applied in most applications. 1-way beams are typically used in perimeter zones and small spaces such as individual offices and hotel rooms.

a)

www.titus-hvac.com | www.titus-energysolutions.com

"" After the throw pattern has been decided, placement of the beam within the space can be determined. Active chilled beams, because of their design, share throw characteristics with conventional slot diffusers. Placement and orientation of active beams is critical for thermal comfort due long throw values associated with active beams. In open office plans it is typically more cost effective to use several longer beams that are installed parallel to the long direction of conventional ceiling systems, instead of numerous smaller beams the length of the module division. (Figure 8, Openoffice Active Beam Layout) However in an open office the number and size of beams used will be determined by balancing the cost per beam, cost of air side operating pressure, and water side pumping power to achieve optimum energy efficiency. "" When applying 2-way and 4-way beams in small offices and individual offices the recommended location is directly above the occupants. This will result in the lowest velocities within the occupied space. It is also recommended that 2-way beams are installed lengthwise in the space. This will allow for the use of longer beams, reducing the cooling requirements per linear foot which will inturn lower total air flow per foot and the resulting velocities in the space ensuring occupancy comfort. If placement is required near a wall use of 1-way throw beams are recommended. 1-way beams can also be effectively used in perimeter zones for cooling applications; however they should be supplemented with baseboard heating to address window loads during the heating season. 2-way beams can be effectively applied in perimeter zones for both heating and cooling. Care must be taken if 2-way beams are installed parallel to windows. In intermediate seasons when internal cooling is required and window surfaces are cool an acceleration of the air can occur in the space creating drafts and potential discomfort.

U

b)

APPLICATION GUIGE

Figure 8 - Open-office Active Beam Layout: In lengthwise installations(a) there are less piping and duct connections than in crosswise installations(b). In crosswise installations, there is typically one beam per module. Even if the total cost for the beams in both layouts are the same, installation costs, additional valves, piping, and ductwork will prove to be more costly.

U15


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

APPLICATION GUIDE

APPLICATION GUIDE

U

U16

X

X

X

Vcollision

Y

Occupied Zone

The minimum distance between units (2X) or minimum distance from a sidewall (X), can be determined by taking the difference between the diffuser's characteristic throw to 50 fpm (T50 ) and the distance between the ceiling and the occupied zone (Y). Figure 9. Local Velocity Diagram "" The ideal location for most active beams is directly above the occupant. This is because the lowest velocities in the space will occur in the induced air path. If it is desired to position an active beam close to a wall, a unit with an asymmetrical or 1-way throw pattern is recommended. As active chilled beams have throw characteristics similar to linear slot diffusers the same principles for determining thermal comfort conditions should be used. Location for final placement should take into consideration the allowable average air speed in the occupied space in accordance with ASHRAE Standard 55. Accounting for the air side sensible capacity will allow for reduced capacity requirements of the water coils in the beams. Designing with this in mind will reduce airflow requirements per linear foot, which will help to meet the requirements for thermal comfort. When placing two beams in the same space as shown in Figure 9, Local velocity diagram, care must be taken to ensure that the colliding air streams do not result in velocities over 50 fpm causing discomfort. A general guideline to achieve air velocities of 50 fpm or less in the occupied space is to ensure the velocities of colliding airstreams are below 100 fpm. If velocities at the point of collision are greater than 100 fpm, the distance from the ceiling for the air flow to slow to 50 fpm is noted in the equation below: Y=T50 - X Where: Y = distance from the ceiling X = half the distance to the adjacent diffuser T50 = diffuser characteristic throw to 50 fpm

CONTROL OF CHILLED CEILING SYSTEMS

Very basic room controls can be used with chilled ceiling systems. This is due to the fact that most systems are designed to operate with a constant volume of supply air. Also, the large coil size, combined with relatively low velocities across the coils result in a fairly long response time. With chilled beams or radiant systems, the most common method for controlling room temperature is regulating the water flow rate through the selected equipment. The alternative is to vary the supply water temperature. The control of water flow rate is achieved through onoff, time proportional on-off, or modulating control valve actuators. The maximum flow rate should be limited by a balancing valve installed on each beam circuit. It is generally recommended for 2-way valves to be used to reduce pumping costs, but 3-way valves can be used when pump speeds are not variable. While on-off and modulating actuator control is straight forward, time proportional on-off systems are a bit more complex. These systems use a feedback control loop to open and close an on-off actuator such that the total time open is proportional to the percentage of flow that is requested by a modulated room controller. While control of this system is more complex, actuator first costs are greatly reduced. Chilled beams should be connected in parallel so that each beam sees the same entering water temperature. For the greatest flexibility of control each beam should be fitted with an actuated control valve. With this setup, the flow rate can be modulated in each beam. And, in the event the entering water temperature reaches a point where condensation is a concern the flow rate to individual units affected can be shut


Chilled Beam

APPLICATION GUIDE

handler loop and chilled beam loop are acceptable (see Figure 11b). Supply Water Temperature Control

Chilled Beam Supply Loop

Balancing Valves (Manual or Automatic)

Chilled Beam Supply Loop

Main Return Loop

Supply Water Temperature Control

Chiller Bypass Loop

3-Way Flow Control Vale (Proportional Control)

Chilled Beams A) Beams installed with a single 2-way valve serving a entire zone.

3-Way Flow Control Vale (Proportional Control) Chilled Beam Return Loop

Figure 10a. Chilled beam zone control - Single flow control

Thermostat

3-Way Flow Control Vale (On/Off or Proportional Control)

Heat Exchanger Bypass Loop

A) Supply temperature control with dedicated chiller

Main Supply Loop

www.titus-hvac.com | www.titus-energysolutions.com

2-Way Flow Control Vale (On/Off or Proportional Control)

Chilled Beam Return Loop

B) Supply temperature control secondary chilled beam loop

Figure 11a. Supply water temperature control with dedicated chiller; Figure 11b. Supply water temperature control chilled beam loop

U

When designing systems with occupied/unoccupied modes or with night set back set ups. It is critical to ensure the design relative humidity conditions are met prior any water based sensible cooling. In most cases, 30 minutes of dryair ventilation will be enough to prevent any condensation during morning start-up and when returning to occupied modes. This can easily be achieved for night set back/ morning start up by offsetting the time schedules for the air handlers and chilled beam system pumps.

Balancing Valves (Manual or Automatic)

Chilled Beams B) Beams installed with a single 3-way valve serving a entire zone.

Figure 10b. Chilled beam zone control

Alternatively to varying water flow rate through the beam, the entering water temperature can be varied according to the load in the space. This requires more sophisticated control sequences. Varying the water temperature also requires a bypass loop, that can inject higher temperature water from the return loop of the chilled beams or main air handler into the supply water loop for the beams. In order to control the supply water temperature a dedicated chiller and supply/return circuits can be used (see Figure 11a), or heat exchanger between the main air

APPLICATION GUIGE

down, so that the entire zone do not suffer a loss in sensible capacity. The alternative is one actuated control valve per zone. In either situation, each beam should be fitted with isolation valves on the both the supply and return.

U17


• DISA is a linear active chilled beam diffuser with 2-way air distribution (1-way available on DISA-300HT only). • Unique linear design provides high induction and low noise levels.

DISA

www.titus-hvac.com | www.titus-energysolutions.com

Chilled Beam

Linear Active Chilled Beams DISA

• Available in cooling & supply air (CO) or cooling, heating & supply air (CH) configurations. • Available as diffuser shell (no coil/piping). • Accessories include rubber lip seal.

• Standard finish is RAL 9010 white paint on diffuser face. • Diffuser is designed to fit into standard module ceiling grids 24” or 12” in width.

DESCRIPTION

U

The DISA active chilled beam diffuser was developed for removing high thermal loads from the space. Supplied with tempered and dehumidified primary air, to handle the latent load, the beam addresses the remaining loads in the space with a heat exchanger installed in the unit. Decoupling the latent and sensible loads takes advantage of the superior volumetric heat capacity of water. The reduced the volume of air that must be delivered to the space results in reducing air handler capacity and size, smaller duct sizes, and overall energy savings. In the primary distribution channel, CNC formed nozzles are precisely arranged. The number and size of nozzles (A, B, C, D) can be varied, thus allowing optimum adjustment of the primary supply air volume. By reducing the primary air to meet the minimum requirements for either room ventilation or latent load in the space, whichever is greater, total system energy costs are reduced.

DISA

The primary air, supplied by the air distribution system is supplied to the mixing chamber via induction nozzles. In the mixing chamber, room air is induced over a horizontally mounted heat exchanger, to address sensible loads in the space. The primary air is mixed with the cooled secondary air and supplied to the room through 1- or 2-slot diffusers integrated into the unit design. The DISA chilled beams are available in a multitude of configurations, resulting in produces that easily integrate into any building or design. These products have been designed to address heating and cooling loads in the space, with either a 2-pipe or 4-pipe system. The low overall height of the DISA product line is ideal for reducing the space required for false ceilings in new buildings and for retrofit applications.

INSTALLATION

U18

In order to achieve a uniform cooling capacity, the beams should be connected to the cold water distribution system

in parallel. It is recommended that DISA chilled beams are connected to a supply air duct system which controls the supplied primary air volume. When integrated with room controllers, the units can be used both for single room and zone control.

ADVANTAGES • Removal of high thermal loads is possible in this air/water system. • The height of the air duct system is reduced to a minimum, due to the low supply of primary air. • Substantial reduction in the operating costs, due to low primary air volume. • Improvement of the thermal comfort inside the room. • Individual adjustment of the primary air volume by means of the nozzle configuration A, B, C, D. • Suitable for all standard ceiling grids.

CLEANING OF THE GRILLE/COIL To clean the grill and the coil, release the safety lock attached to the profile (see #1, above). The grille can now Titus by Schako


Chilled Beam

Linear Active Chilled Beams (continued)

(1-Way)

www.titus-hvac.com | www.titus-energysolutions.com

swing down, and both the grille and coil become easily accessed for cleaning purposes (see #2, above). Do not use any scouring agents for cleaning these components; damage to the unit construction materials (galvanized steel, aluminum and copper) and the surface coatings (paint and anodized surfaces) may occur. After completion of maintenance, grille must be returned to its original operating position and then the safety locks must be engaged. (2-Way)

U

Schematic diagram of the mode of operation 1 2 3 4

Primary Air Room Air Secondary Air Heat exchanger

(1-Way)

(2-Way)

Schematic diagram of the jet path

DISA U19 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

Linear Active Chilled Beams (continued)

U

CONSTRUCTION HOUSING

• Galvanized sheet steel, with 1 or 2 connection pipes E4”, E5” and E6”, position of primary air inlet: • Vertical connection (-V, standard). • Horizontal connection (-H). • with 1 central connection piece (AS1, -AS4*). • with 2 central connection pieces at the same distance (-AS2/AS3, -AS5/6*). • Suitable for all standard ceiling grids.

SLOT

• Extruded aluminum profile painted to RAL 9010 (white, standard).

PERFORATED SHEET GRILLE (-SR,-SQ,-RE,-OB) • Galvanized sheet steel painted to RAL 9010 (white, standard).

LOUVRE GRID (-PA)

• Extruded aluminum profile painted to RAL 9010 (white, standard).

END PIECES (PAIR)

• Sheet steel painted to RAL 9010 (white, standard).

HEAT EXCHANGER (4-CONDUCTOR COOLING AND HEATING)

• A E12mm, copper tubing (14 tubes for cooling mode / 4 for heating mode). • Connection Cu, 12mm x 1.0mm (wall) smooth wall. *Available on DISA-300HT, 1-way throw, horizontal duct connection only

ACCESSORIES EXTENSION

• Possible from 0.5 to 10 inches. The total length and the extension of the DISA must not exceed 10 feet. • Upon customer request, this component may have an integrated return air plenum box or one equipped with mechanically operated grille for mounting various components (lighting, loudspeaker, smoke detector, sprinkler, etc.). ◊ Contact Titus for pricing and availability.

RUBBER LIP SEAL (-GD)

• At the connection pipe for better tightness

CONTROL UNITS

• Valves • Actuators • Temperature controls

CONDENSATION DETECTOR

DISA

• Galvanized sheet steel frame. • Aluminum fins.

U20 Titus by Schako


DIMENSIONS

Chilled Beam www.titus-hvac.com | www.titus-energysolutions.com

DISA 300HT - (1-WAY)

B = 11.7”

U

ARRANGEMENT OF THE CONNECTION PIPES (-AS) AND WATER CONNECTION (-WS)

Number/position of the connection pipes • with vertical connection (-V standard). • with horizontal connection (-H). • with 1 central connection piece (AS1, -AS4). • with 2 central connection pieces (-AS2/AS3, -AS5/6).

DIMENSIONS

Number/position of the water connections • with 4 water connections (2 for cooling mode / 2 for heating mode). • sideways top left (-WS1). • sideways top right (-WS2).

U21 Titus by Schako


www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS

U

Chilled Beam

DISA 300HT - (2-WAY)

ARRANGEMENT OF THE CONNECTION PIPES (-AS) AND WATER CONNECTION (-WS)

DIMENSIONS

Number/position of the connection pipes • with vertical connection (-V standard). • with horizontal connection (-H). • with 1 central connection piece (AS1, -AS4). • with 2 central connection pieces (-AS2/AS3, -AS5/6). Number/position of the water connections • with 4 water connections (2 for cooling mode / 2 for heating mode). • sideways top left (-WS1). • sideways top right (-WS2).

U22 Titus by Schako


DIMENSIONS

Chilled Beam www.titus-hvac.com | www.titus-energysolutions.com

DISA 600HT

U

ARRANGEMENT OF THE CONNECTION PIPES (-AS) AND WATER CONNECTION (-WS)

Number/position of the connection pipes • with vertical connection (-V standard). • with horizontal connection (-H). • with 1 central connection piece (AS1, -AS4). • with 2 central connection pieces (-AS2/AS3, -AS5/6).

DIMENSIONS

Number/position of the water connections • with 4 water connections (2 for cooling mode / 2 for heating mode). • sideways top left (-WS1). • sideways top right (-WS2).

U23 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS DISA 300HT (1-WAY)

DISA 300HT (2-WAY)

U

DIMENSIONS

DISA 300HT WITH PERFORATED SHEET GRILLE

U24 Titus by Schako


DIMENSIONS

Chilled Beam www.titus-hvac.com | www.titus-energysolutions.com

DISA 300HT WITH END PIECE

DISA 300HT WITHOUT END PIECE

U

DISA 300HT BAND DESIGN WITHOUT END PIECES MOUNTED IN-BETWEEN

DIMENSIONS

*DIMENSIONS ON REQUEST

U25 Titus by Schako


Chilled Beam

U

Vertical Connection (-V)

DISA 300HT - NUMBER OF CONNECTION PIECES L - 7”

with 1 connection piece (-AS1) L - 7”

Vertical Connection (-V)

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS

Horizontal Connection (-H)

with 2 connection piece (-AS2/AS3) L - 7”

ACCESSORIES Rubber lip seal (-GD)

Horizontal Connection (-H)

DIMENSIONS

with 1 connection piece (-AS1) L - 7”

with 2 connection piece (-AS2/AS3)

U26 Titus by Schako


DIMENSIONS

Chilled Beam www.titus-hvac.com | www.titus-energysolutions.com

DISA 600HT WITH END PIECE

DISA 600HT WITHOUT END PIECE

U DISA 600HT BAND DESIGN WITHOUT END PIECES MOUNTED IN-BETWEEN

DIMENSIONS

DISA 600HT WITH PERFORATED SHEET GRILLE

U27 Titus by Schako


U

Chilled Beam

Vertical Connection (-V)

DISA 600HT - NUMBER OF CONNECTION PIECES

Vertical Connection (-V)

with 1 connection piece (-AS1)

with 2 connection piece (-AS2/AS3)

Horizontal Connection (-H)

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS

Horizontal Connection (-H)

with 1 connection piece (-AS1)

with 2 connection piece (-AS2/AS3)

ACCESSORIES

DIMENSIONS

Rubber lip seal (-GD)

U28 Titus by Schako


Chilled Beam

PERFORMANCE DATA

L

Nozzle Type

[ft] A

B 3 C

D

A

B 4 C

D

A

B 5 C

D

B 6 C

D

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.2

6.15

133

341

474

321

0.5

9.75

212

549

761

495

0.8

12.50

266

693

959

573

0.2

10.60

229

566

795

525

0.5

16.95

362

788

1150

0.8

21.40

457

921

1378

0.2

19.71

423

788

1211

693

0.5

31.15

665

1109

1774

740

0.8

39.20

843

1293

2136

730

0.2

29.45

635

768

1402

737

0.5

46.62

1003

1211

2214

699

0.8

58.91

1262

1467

2730

618

0.2

9.32

198

498

696

478

0.5

14.62

314

778

1092

727

0.8

18.44

396

959

1355

839

0.2

15.89

338

798

1136

771

0.5

25.00

536

1075

1610

0.8

31.57

676

1228

1904

0.2

29.03

624

1075

1699

1007

0.5

45.98

989

1440

2429

1075

0.8

58.06

1245

1648

2893

1051

0.2

43.65

938

1058

1996

1071

0.5

69.08

1484

1563

3047

1003

0.8

87.30

1873

1842

3716

884

0.2

11.87

252

635

887

604

0.5

18.65

399

993

1392

938

0.8

23.52

505

1218

1723

1085

0.2

20.13

433

1020

1454

989

0.5

32.00

686

1372

2057

1245

0.8

40.26

863

1563

2426

0.2

37.08

795

1368

2163

1307

0.5

58.70

1259

1829

3088

1406

0.8

74.17

1590

2105

3695

1385

0.2

55.73

1198

1334

2532

1406

0.5

88.15

1890

1979

3869

1327

0.8

111.25

2388

2324

4712

1184

0.2

14.83

317

792

1109

761

0.5

23.31

502

1242

1744

1170

0.8

29.45

631

1522

2153

1355

0.2

25.22

543

1273

1815

1239

0.5

40.05

860

1696

2556

0.8

50.43

1082

1924

3006

0.2

46.62

1000

1699

2699

1628

0.5

73.74

1580

2249

3828

1740

0.8

93.02

1993

2590

4582

1709

0.2

69.93

1501

1665

3166

1737

0.5

110.61

2375

2440

4814

1634

0.8

139.64

2996

2815

5811

1450

2.14

2.68

3.15

3.65

659 0.13

706

959 0.17

0.20

PERFORMANCE BASED ON: COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

1027

1338

1549 0.23

U

PERFORMANCE DATA

A

Primary Air

www.titus-hvac.com | www.titus-energysolutions.com

DISA 300HT: 1-WAY THROW

1662

U29 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

U

DISA 300HT: 1-WAY THROW (continued) Type

[ft] A

B 7 C

D

A

B 8 C

D

A

B 9

PERFORMANCE DATA

C

D

Primary Air

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.2

17.38

372

928

1300

887

0.5

27.34

587

1454

2040

1378

0.8

34.54

740

1774

2515

1597

0.2

29.67

635

1494

2129

1460

0.5

46.83

1007

1979

2986

1836

0.8

59.12

1269

2238

3508

0.2

54.67

1170

1979

3149

1928

0.5

86.46

1853

2614

4466

2074

0.8

108.92

2337

3057

5394

2044

0.2

82.01

1761

1931

3692

2068

0.5

129.68

2781

2846

5626

1958

0.8

163.59

3511

3265

6776

1747

0.2

19.92

427

1058

1484

1013

0.5

31.36

672

1662

2334

1590

0.8

39.63

850

2027

2876

1842

0.2

34.12

730

1716

2446

1679

0.5

53.82

1153

2262

3415

0.8

67.81

1457

2542

3999

0.2

62.72

1344

2259

3603

2231

0.5

98.96

2122

2941

5063

2409

0.8

125.02

2678

3446

6125

2378

0.2

94.08

2016

2197

4214

2402

0.5

148.75

3190

3190

6380

2283

0.8

187.74

4026

3692

7718

2044

0.2

22.67

485

1204

1689

1157

0.5

35.81

768

1897

2665

1808

0.8

45.13

969

2303

3272

2098

0.2

38.78

833

1952

2784

1914

0.5

61.24

1314

2552

3866

0.8

77.34

1658

2846

4504

0.2

71.41

1532

2552

4084

2542

0.5

112.73

2419

3289

5708

2740

0.8

142.40

3361

3917

7278

2706

0.2

107.22

2300

2487

4787

2733

0.5

169.52

3634

3596

7230

2597

0.2

25.43

546

1344

1890

1297

0.5

40.05

860

2095

2955

2030

0.8

50.64

1085

2484

3569

2354

0.2

43.44

935

2153

3088

2146

0.5

68.87

1474

2706

4180

0.8

86.88

1863

2982

4845

0.2

80.10

1720

2706

4425

2849

0.5

126.72

2716

3613

6329

3074

0.8

159.77

3429

4371

7800

3033

0.2

120.36

2579

2648

5227

3064

0.5

190.29

4081

4094

8175

2914

4.15

4.69

5.19

0.27

1972

COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

2119 0.30

2279

2416 0.34

2597

0.8 A

B 10 C

D

U30

PERFORMANCE BASED ON:

Nozzle L

5.66

2713 0.37

2914

0.8

Titus by Schako


Chilled Beam

PERFORMANCE DATA

L

Nozzle Type

[ft] A

B 3 C

D

A

B 4 C

D

A

B 5 C

D

B 6 C

D

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.2

6.15

133

392

525

375

0.5

9.75

212

624

836

549

0.8

12.50

266

778

1044

628

0.2

10.60

229

641

870

577

0.5

16.95

362

887

1249

0.8

21.40

457

1030

1488

0.2

19.71

423

894

1317

744

0.5

31.15

665

1232

1897

795

0.8

39.20

843

1423

2266

781

0.2

29.45

635

887

1522

792

0.5

46.62

1003

1351

2354

751

0.8

58.91

1262

1617

2880

672

0.2

9.32

198

566

764

556

0.5

14.62

314

873

1187

805

0.8

18.44

396

1065

1460

914

0.2

15.89

338

894

1232

850

0.5

25.00

536

1191

1726

1037

0.8

31.57

676

1351

2027

0.2

29.03

624

1198

1822

1085

0.5

45.98

989

1580

2569

1153

0.8

58.06

1245

1795

3040

1129

0.2

43.65

938

1194

2133

1150

0.5

69.08

1484

1723

3207

1082

0.8

87.30

1873

1894

3767

962

0.2

11.87

252

720

972

706

0.5

18.65

399

1109

1508

1041

0.8

23.52

505

1351

1856

1187

0.2

20.13

433

1143

1576

1092

0.5

32.00

686

1515

2201

0.8

40.26

863

1720

2583

0.2

37.08

795

1518

2313

1409

0.5

58.70

1259

2013

3272

1508

0.8

74.17

1590

2286

3876

1488

0.2

55.73

1198

1505

2702

1508

0.5

88.15

1890

2191

4081

1430

0.8

111.25

2388

2201

4589

1283

0.2

14.83

317

901

1218

914

0.5

23.31

502

1389

1890

1297

0.8

29.45

631

1679

2310

1481

0.2

25.22

543

1423

1965

1361

0.5

40.05

860

1866

2726

0.8

50.43

1082

2109

3190

0.2

46.62

1000

1880

2880

1754

0.5

73.74

1580

2477

4057

1866

0.8

93.02

1993

2798

4790

1836

0.2

69.93

1501

1870

3371

1863

0.5

110.61

2375

2702

5077

1761

0.8

139.64

2996

2266

5261

1576

2.14

2.68

3.15

3.65

713 0.13

0.17

757

PERFORMANCE BASED ON: COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

1105

U

1348 0.20

1440

PERFORMANCE DATA

A

Primary Air

www.titus-hvac.com | www.titus-energysolutions.com

DISA 300HT: 2-WAY THROW

1675 0.23

1788

U31 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

U

DISA 300HT: 2-WAY THROW (continued) Type

[ft] A

B 7 C

D

A

B 8 C

D

A

B 9

PERFORMANCE DATA

C

D

Primary Air

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.2

17.38

372

1058

1430

1037

0.5

27.34

587

1624

2211

1529

0.8

34.54

740

1955

2695

1747

0.2

29.67

635

1668

2303

1610

0.5

46.83

1007

2173

3180

1986

0.8

59.12

1269

2450

3719

0.2

54.67

1170

2180

3351

2078

0.5

86.46

1853

2907

4760

2225

0.8

108.92

2337

3286

5623

2194

0.2

82.01

1750

2160

3910

2218

0.5

129.68

2781

3187

5968

2109

0.8

163.59

3511

1976

5486

1897

0.2

19.92

427

1208

1634

1187

0.5

31.36

672

1856

2528

1764

0.8

39.63

850

2228

3078

2016

0.2

34.12

730

1914

2644

1853

0.5

53.82

1153

2474

3627

0.8

67.81

1457

2767

4224

0.2

62.72

1344

2477

3821

2405

0.5

98.96

2122

3269

5391

2583

0.8

125.02

2678

3719

6398

2552

0.2

94.08

2016

2450

4466

2576

0.5

148.75

3190

3589

6780

2457

0.8

187.74

4026

2119

6145

2218

0.2

22.67

485

1375

1860

1355

0.5

35.81

768

2115

2883

2006

0.8

45.13

969

2518

3487

2296

0.2

38.78

833

2173

3006

2112

0.5

61.24

1314

2774

4088

0.8

77.34

1658

3088

4746

0.2

71.41

1532

2781

4313

2740

0.5

112.73

2419

3695

6114

2941

0.8

142.40

3054

4204

7257

2904

0.2

107.22

2300

2753

5053

2931

0.5

169.52

3634

4098

7732

2798

0.2

25.43

546

1535

2081

1522

0.5

40.05

860

2310

3170

2252

0.8

50.64

1085

2675

3760

2576

0.2

43.44

935

2368

3303

2368

0.5

68.87

1474

2907

4381

0.8

86.88

1863

3293

5156

0.2

80.10

1720

2914

4633

3071

0.5

126.72

2716

4221

6937

3296

0.8

159.77

3429

2713

6142

3258

0.2

120.36

2579

2887

5466

3289

0.5

190.29

4081

4197

8278

3139

4.15

4.69

5.19

0.27

2122

COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

2296 0.30

2453

2614 0.34

2794

0.8 A

B 10 C

D

U32

PERFORMANCE BASED ON:

Nozzle L

5.66

2934 0.37

3136

0.8

Titus by Schako


Chilled Beam

PERFORMANCE DATA

L

Nozzle Type

[ft] A

B 3 C

D

A

B 4 C

D

A

B 5 C

D

B 6 C

D

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.2

6.15

133

392

525

375

0.5

9.75

212

624

836

549

0.8

12.50

266

778

1044

628

0.2

10.60

229

641

870

577

0.5

16.95

362

887

1249

0.8

21.40

457

1030

1488

0.2

19.71

423

894

1317

744

0.5

31.15

665

1232

1897

795

0.8

39.20

843

1423

2266

781

0.2

29.45

635

887

1522

792

0.5

46.62

1003

1351

2354

751

0.8

58.91

1262

1617

2880

672

0.2

9.32

198

566

764

556

0.5

14.62

314

873

1187

805

0.8

18.44

396

1065

1460

914

0.2

15.89

338

894

1232

850

0.5

25.00

536

1191

1726

1037

0.8

31.57

676

1351

2027

0.2

29.03

624

1198

1822

1085

0.5

45.98

989

1580

2569

1153

0.8

58.06

1245

1795

3040

1129

0.2

43.65

938

1194

2133

1150

0.5

69.08

1484

1723

3207

1082

0.8

87.30

1873

1894

3767

962

0.2

11.87

252

720

972

706

0.5

18.65

399

1109

1508

1041

0.8

23.52

505

1351

1856

1187

0.2

20.13

433

1143

1576

1092

0.5

32.00

686

1515

2201

0.8

40.26

863

1720

2583

0.2

37.08

795

1518

2313

1409

0.5

58.70

1259

2013

3272

1508

0.8

74.17

1590

2286

3876

1488

0.2

55.73

1198

1505

2702

1508

0.5

88.15

1890

2191

4081

1430

0.8

111.25

2388

2201

4589

1283

0.2

14.83

317

901

1218

914

0.5

23.31

502

1389

1890

1297

0.8

29.45

631

1679

2310

1481

0.2

25.22

543

1423

1965

1361

0.5

40.05

860

1866

2726

0.8

50.43

1082

2109

3190

0.2

46.62

1000

1880

2880

1754

0.5

73.74

1580

2477

4057

1866

0.8

93.02

1993

2798

4790

1836

0.2

69.93

1501

1870

3371

1863

0.5

110.61

2375

2702

5077

1761

0.8

139.64

2996

2266

5261

1576

2.14

2.68

3.15

3.65

713 0.13

0.17

757

PERFORMANCE BASED ON: COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

1105

U

1348 0.20

1440

PERFORMANCE DATA

A

Primary Air

www.titus-hvac.com | www.titus-energysolutions.com

DISA 600HT: 2-WAY THROW

1675 0.23

1788

U33 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

U

DISA 600HT: 2-WAY THROW (continued) Type

[ft] A

B 7 C

D

A

B 8 C

D

A

B 9

PERFORMANCE DATA

C

D

Primary Air

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.2

17

317

1239

1556

1928

0.5

27

587

2143

2730

3293

0.8

35

740

2562

3303

3835

0.2

30

543

1839

2382

2764

0.5

47

1007

2781

3787

4013

0.8

59

1269

3204

4473

0.2

55

1000

2706

3705

3798

0.5

86

1853

3610

5463

4685

0.8

109

2337

4009

6346

4924

0.2

82

1501

2842

4343

3569

0.5

130

2781

3852

6633

4357

0.8

164

3511

4326

7837

4480

0.2

20

372

1436

1808

2177

0.5

31

672

2450

3122

3702

0.8

40

850

2873

3722

4285

0.2

34

635

2102

2736

3088

0.5

54

1153

3166

4320

0.8

68

1457

3617

5074

0.2

63

1170

3057

4227

4217

0.5

99

2122

4077

6200

5145

0.8

125

2678

4528

7206

5370

0.2

94

1761

3221

4982

3937

0.5

149

3190

4337

7527

4736

0.8

188

4026

4831

8858

4825

0.2

23

427

1583

2010

2443

0.5

36

768

2723

3490

4105

0.8

45

969

3235

4204

4719

0.2

39

730

2388

3119

3436

0.5

61

1314

3528

4842

0.8

77

1658

4006

5664

0.2

71

1344

3473

4818

4637

0.5

113

2419

4531

6950

5575

0.8

142

3054

5005

8059

5777

0.2

107

2016

3596

5613

4296

0.5

170

3634

4821

8455

5077

0.2

25

485

1767

2252

2699

0.5

40

860

3016

3876

4473

0.8

51

1085

3555

4640

5111

0.2

43

935

2644

3579

3774

0.5

69

1474

3879

5353

0.8

87

1863

4401

6264

0.2

80

1720

3784

5504

5012

0.5

127

2716

4937

7653

5947

0.8

160

3429

5442

8871

6114

0.2

120

2579

3999

6578

4623

0.5

190

4081

5268

9349

5374

8.48

9.48

10.49

0.54

4453

COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

4456 0.60

4920

4896 0.67

5370

0.8 A

B 10 C

D

U34

PERFORMANCE BASED ON:

Nozzle L

11.46

5309 0.74

5787

0.8

Titus by Schako


Chilled Beam

Linear Active Chilled Beams (continued)

• DISA-V is a linear sidewall active chilled beam diffuser with horizontal air distribution. DISA-V

• Unique linear design provides high induction and low noise levels. • Configurable as cooling & supply air (CO) or cooling, heating & supply air (CH) configurations. • Available as diffuser shell (no coil/piping). • Accessories include rubber lip seal.

• Standard finish is RAL 9010 white paint on diffuser face. • Diffuser is designed to be recessed into a sidewall, soffit or bulkhead.

DESCRIPTION

INSTALLATION

The DISA-V sidewall active chilled beam diffuser was developed for removing high thermal loads from the space. Supplied with tempered and dehumidified primary air, to handle the latent load, the beam addresses the remaining loads in the space with a heat exchanger installed in the unit. Decoupling the latent and sensible loads takes advantage of the superior volumetric heat capacity of water. The reduced the volume of air that must be delivered to the space results in reducing air handler capacity and size, smaller duct sizes, and overall energy savings.

In order to achieve a uniform cooling capacity, the beams should be connected to the cold water distribution system in parallel. It is recommended that DISA-V chilled beams are connected to the supply air duct system which controls the supplied primary air volume. When integrated with room controllers, the units can be used both for single room and zone control.

In the primary distribution channel, CNC formed nozzles are precisely arranged. The number and size of nozzles (A, B, C, D) can be varied, thus allowing optimum adjustment of the primary supply air volume. By reducing the primary air to meet the minimum requirements for either room ventilation or latent load in the space, total system energy costs are reduced. The primary air, supplied by the air distribution system is supplied to the mixing chamber via induction nozzles. In the mixing chamber, room air is induced through a vertically mounted heat exchanger, to address sensible loads in the space. The primary air is mixed with the cooled secondary air and supplied to the room in a horizontal throw pattern through 1-slot diffuser integrated into the unit design.

www.titus-hvac.com | www.titus-energysolutions.com

DISA-V

U

ADVANTAGES • Removal of high thermal loads is possible in this air/water system. • The size of the supply duct system is minimized due to reduced primary air requirements. • Substantial reduction in the operating costs due to low primary air volume. • Improved thermal comfort inside the space. • Individual adjustment of the primary air volume by means of the nozzle configuration A, B, C, & D. • Suitable for all standard ceiling grids.

DISA-V

The DISA-V chilled beams are available in a multitude of configurations, resulting in produces that easily integrate into any building or design. These products have been designed to address heating and cooling loads in the space, with either a 2-pipe or 4-pipe system. The construction of the DISA-V product line is ideal for installation in soffits and sidewalls where ceiling space is limited. The horizontal throw pattern is enables comfortable cooling to be delivered to small spaces by effectively rolling without creating drafts.

U35 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

Linear Active Chilled Beams (continued)

Schematic diagram of the mode of operation

U

(1-Way)

(2-Way)

Schematic diagram of the jet path

CONSTRUCTION HOUSING

• Galvanized sheet steel, with 1 or 2 connection pipes E4”, E5” and E6”, position of primary air inlet: • with 1 central connection piece (AS1, -AS4*). • with 2 central connection pieces at the same distance (-AS2/AS3).

SLOT

• Extruded aluminum profile painted to RAL 9010 (white, standard).

DISA-V

PERFORATED SHEET GRILLE (-SR,-SQ,-RE,-OB) • Galvanized sheet steel painted to RAL 9010 (white, standard).

LOUVRE GRID (-PA)

• Extruded aluminum profile painted to RAL 9010 (white, standard).

• A E12mm, copper tubing (14 tubes for cooling mode / 4 for heating mode). • Connection Cu, 12mm x 1.0mm (wall) smooth wall.

ACCESSORIES EXTENSION

• Possible up to 12 inches. The total length and the extension of the DISA-V must not exceed 10 feet.

RUBBER LIP SEAL (-GD)

• At the connection pipe for better tightness

CONTROL OPTIONS

• Valves • Actuators • Temperature controls • Condensation sensor

HEAT EXCHANGER (4-PIPE COOLING AND HEATING)

U36

• Galvanized sheet steel frame. • Aluminum fins.

Titus by Schako


Chilled Beam

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

DISA-V

U

ARRANGEMENT OF THE CONNECTION PIPES (-AS) AND WATER CONNECTION (-WS) WATER CONNECTIONS

DUCT CONNECTIONS WITH 1 CONNECTION PIECE (-AS1) Number/position of the connection pipes • with 1 central connection piece (AS1). • with 2 central connection pieces (-AS2/AS3). Number/position of the water connections • with 4 water connections (2 for cooling mode / 2 for heating mode). • sideways top left (-WS1). • sideways top right (-WS2).

DIMENSIONS

WITH 2 CONNECTION PIECES (-AS2/-AS3)

U37 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS WATER CONNECTIONS

L

Single Connection

Dual Connection

a,c

a,b

900 1200 1500

U

1800 2100 2400 2700 3000

PERFORATED SHEET GRILLE

ACCESSORIES

DIMENSIONS

Rubber lip seal (-GD)

U38 Titus by Schako


Chilled Beam

PERFORMANCE DATA

L

Nozzle Type

[ft] A

B 3 C

D

A

B 4 C

D

A

B 5 C

D

B 6 C

D

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.2

6.15

133

341

474

321

0.5

9.75

212

549

761

495

0.8

12.50

266

693

959

573

0.2

10.60

229

566

795

525

0.5

16.95

362

788

1150

0.8

21.40

457

921

1378

0.2

19.71

423

788

1211

693

0.5

31.15

665

1109

1774

740

0.8

39.20

843

1293

2136

730

0.2

29.45

635

768

1402

737

0.5

46.62

1003

1211

2214

699

0.8

58.91

1262

1467

2730

618

0.2

9.32

198

498

696

478

0.5

14.62

314

778

1092

727

0.8

18.44

396

959

1355

839

0.2

15.89

338

798

1136

771

0.5

25.00

536

1075

1610

0.8

31.57

676

1228

1904

0.2

29.03

624

1075

1699

1007

0.5

45.98

989

1440

2429

1075

0.8

58.06

1245

1648

2893

1051

0.2

43.65

938

1058

1996

1071

0.5

69.08

1484

1563

3047

1003

0.8

87.30

1873

1842

3716

884

0.2

11.87

252

635

887

604

0.5

18.65

399

993

1392

938

0.8

23.52

505

1218

1723

1085

0.2

20.13

433

1020

1454

989

0.5

32.00

686

1372

2057

1245

0.8

40.26

863

1563

2426

0.2

37.08

795

1368

2163

1307

0.5

58.70

1259

1829

3088

1406

0.8

74.17

1590

2105

3695

1385

0.2

55.73

1198

1334

2532

1406

0.5

88.15

1890

1979

3869

1327

0.8

111.25

2388

2324

4712

1184

0.2

14.83

317

792

1109

761

0.5

23.31

502

1242

1744

1170

0.8

29.45

631

1522

2153

1355

0.2

25.22

543

1273

1815

1239

0.5

40.05

860

1696

2556

0.8

50.43

1082

1924

3006

0.2

46.62

1000

1699

2699

1628

0.5

73.74

1580

2249

3828

1740

0.8

93.02

1993

2590

4582

1709

0.2

69.93

1501

1665

3166

1737

0.5

110.61

2375

2440

4814

1634

0.8

139.64

2996

2815

5811

1450

2.14

2.68

3.15

3.65

659 0.13

706

959 0.17

0.20

PERFORMANCE BASED ON: COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

1027

1338

1549 0.23

U

PERFORMANCE DATA

A

Primary Air

www.titus-hvac.com | www.titus-energysolutions.com

DISA-V

1662

U39 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

U

DISA-V (continued) Type

[ft] A

B 7 C

D

A

B 8 C

D

A

B 9

PERFORMANCE DATA

C

D

Primary Air

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.2

17.38

372

928

1300

887

0.5

27.34

587

1454

2040

1378

0.8

34.54

740

1774

2515

1597

0.2

29.67

635

1494

2129

1460

0.5

46.83

1007

1979

2986

1836

0.8

59.12

1269

2238

3508

0.2

54.67

1170

1979

3149

1928

0.5

86.46

1853

2614

4466

2074

0.8

108.92

2337

3057

5394

2044

0.2

82.01

1761

1931

3692

2068

0.5

129.68

2781

2846

5626

1958

0.8

163.59

3511

3265

6776

1747

0.2

19.92

427

1058

1484

1013

0.5

31.36

672

1662

2334

1590

0.8

39.63

850

2027

2876

1842

0.2

34.12

730

1716

2446

1679

0.5

53.82

1153

2262

3415

0.8

67.81

1457

2542

3999

0.2

62.72

1344

2259

3603

2231

0.5

98.96

2122

2941

5063

2409

0.8

125.02

2678

3446

6125

2378

0.2

94.08

2016

2197

4214

2402

0.5

148.75

3190

3190

6380

2283

0.8

187.74

4026

3692

7718

2044

0.2

22.67

485

1204

1689

1157

0.5

35.81

768

1897

2665

1808

0.8

45.13

969

2303

3272

2098

0.2

38.78

833

1952

2784

1914

0.5

61.24

1314

2552

3866

0.8

77.34

1658

2846

4504

0.2

71.41

1532

2552

4084

2542

0.5

112.73

2419

3289

5708

2740

0.8

142.40

3361

3917

7278

2706

0.2

107.22

2300

2487

4787

2733

0.5

169.52

3634

3596

7230

2597

0.2

25.43

546

1344

1890

1297

0.5

40.05

860

2095

2955

2030

0.8

50.64

1085

2484

3569

2354

0.2

43.44

935

2153

3088

2146

0.5

68.87

1474

2706

4180

0.8

86.88

1863

2982

4845

0.2

80.10

1720

2706

4425

2849

0.5

126.72

2716

3613

6329

3074

0.8

159.77

3429

4371

7800

3033

0.2

120.36

2579

2648

5227

3064

0.5

190.29

4081

4094

8175

2914

4.15

4.69

5.19

0.27

1972

COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

2119 0.30

2279

2416 0.34

2597

0.8 A

B 10 C

D

U40

PERFORMANCE BASED ON:

Nozzle L

5.66

2713 0.37

2914

0.8

Titus by Schako


Chilled Beam

PERFORMANCE DATA

Nozzle Type L [ft]

3

4

5

6

7

8

10

A

B

C

D

Connection Piece Diameter

Connection Piece Diameter

Connection Piece Diameter

Connection Piece Diameter

[in wg]

ø4"

ø5"

ø6"

ø4"

ø5"

ø6"

ø4"

ø5"

ø6"

ø4"

ø5"

ø6"

0.2 0.2 0.3 0.4 0.5 0.6 0.2 0.2 0.3 0.4 0.5 0.6 0.2 0.2 0.3 0.4 0.5 0.6 0.2 0.2 0.3 0.4 0.5 0.6 0.2 0.2 0.3 0.4 0.5 0.6 0.2 0.2 0.3 0.4 0.5 0.6 0.2 0.2 0.3 0.4 0.5 0.6 0.2 0.2 0.3 0.4 0.5 0.6

20 20 20 21 23 26 20 20 20 21 23 27 20 20 20 22 24 27 20 20 20 22 25 28 20 20 20 23 25 28 20 20 21 24 26 29 20 20 22 25 27 30 20 20 24 26 29 32

20 20 20 21 23 26 20 20 20 21 23 27 20 20 20 22 24 27 20 20 20 22 25 28 20 20 20 23 25 28 20 20 21 23 26 29 20 20 21 24 26 29 20 20 22 25 27 30

20 20 20 21 23 26 20 20 20 21 23 27 20 20 20 22 24 27 20 20 20 22 24 28 20 20 20 23 25 28 20 20 21 23 26 29 20 20 21 24 26 29 20 20 22 24 27 30

20 20 20 21 23 27 20 20 20 21 24 28 20 20 20 23 25 29 20 20 22 25 28 31 20 21 25 28 30 33 21 24 27 30 33 36 24 27 31 34 36 39 27 30 33 36 39 42

20 20 20 21 23 27 20 20 20 21 24 28 20 20 20 22 25 28 20 20 20 23 25 29 20 20 21 24 26 30 20 20 22 25 28 31 20 20 24 27 30 34 20 22 26 30 32 36

20 20 20 21 23 27 20 20 20 21 24 28 20 20 20 22 24 28 20 20 20 22 25 29 20 20 20 23 26 29 20 20 21 24 26 30 20 20 21 24 27 31 20 20 22 25 28 31

20 20 21 25 28 32 20 21 25 28 31 35 23 26 30 33 35 39 29 31 35 38 41 44 33 35 39 42 45 48 37 39 43 46 48 51 40 43 46 49 52 55 43 46 50 53 55 58

20 20 21 24 28 32 20 20 22 25 28 33 20 20 24 27 30 35 21 23 28 31 34 38 25 28 32 36 39 42 29 32 36 40 43 46 33 36 40 44 47 50 36 39 44 47 50 54

20 20 21 24 27 32 20 20 21 25 28 33 20 20 22 25 29 33 20 20 23 27 30 34 20 20 25 28 31 36 20 22 27 30 33 37 23 25 30 33 36 40 25 28 33 36 39 43

25 28 34 39 44 51 29 32 37 41 45 51 34 37 41 45 48 53 40 42 46 50 52 56 44 46 50 53 56 60 48 50 54 57 60 63 51 54 57 60 63 66 54 57 61 64 66 69

24 28 34 39 44 50 25 29 35 40 45 51 28 31 37 42 46 52 33 36 41 45 49 54 37 40 45 49 52 57 42 44 49 53 56 60 46 48 53 57 60 63 49 52 57 60 63 67

24 28 34 39 44 50 25 28 34 40 44 51 26 29 35 40 45 52 27 30 36 41 46 52 29 32 38 42 47 53 32 35 40 44 48 54 35 38 43 47 50 56 38 41 46 50 53 58

Titus by Schako

U

PERFORMANCE DATA

9

PS

www.titus-hvac.com | www.titus-energysolutions.com

DISA-V SOUND DATA (dBA)

U41


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

U

PART 1 – GENERAL 1.01 SUMMARY

A. This section describes active ceiling mounted chilled beams. B. Model DISA

1.02 SUBMITTALS

A. Submit as specified herein. B. Submit for review: • a. Product data for all items. Data shall be complete with the following information: 1. Operating weight and dimensions of assembled units. 2. Performance data, including supply airflow, water flow rate, water pressure drop, and inlet static pressure. 3. Construction details, including materials of construction and fastening methods.

PART 2 – PRODUCTS 2.01 MANUFACTURERS

A. Units shall be model DISA with diffuser with throw pattern as specified on drawings. B. Considering the innovative technology utilized to engineer and manufacturer the applied equipment specified for this project the following substitution considerations shall apply to any manufacture requesting prior approval: a. Fifteen day prior to bid date any manufacturer who would like to be considered shall submit the following information via certified mail to the design professional. b. Submittal documentation for every product proposed including schedule and performance date for each with physical and thermal calculations. c. Any and all costs associated with using a substituted product shall be the responsibility of the Mechanical contractor. This includes but is not limited to redesign fees, additional piping and ductwork, and controls required.

SPECIFICATIONS

2.02 GENERAL

U42

A. It is the design intent of these specifications to provide a fully integrated HVAC system with all parts working together. These induction units need clean, dehumidified primary air from a dedicated outdoor air unit, hot and chilled water from a boiler and chiller, piping, and controls to coordinate each component to perform as intended. Changes, modifications, or substitutions on any component will impact all the other parts of the system and cannot be made without a careful review of all related specifications. B. Chilled beam unit shall be constant volume primary air flow units designed to induce a secondary airflow within the conditioned space using the primary conditioned air supply. Units shall be designed for ceiling installation with factory supplied hanging brackets. Hanger rods or other approved hanging system to be field supplied and installed in the field by installing contractor. C. Units shall be equipped with a round low velocity pres-

sure inlet transition, one air plenum and air induction nozzle plate, a supply and return chilled water piping connection, one supply and return hot water piping connection, and one combination supply/return air grille for effective room air distribution. The grille shall be hinged and secured in place with tool-less safety fasteners to provide full access to the return air side of the coil. The unit shall be capable of inducing the secondary airflow within the conditioned space using the velocity pressure of the primary airflow. This secondary air must flow directly from the room to the unit and shall not use the ceiling as a return air plenum. Active beam units using the ceiling plenum as a return air path are not acceptable. D. Each unit shall be equipped with a multiple row water coil for chilled water and hot water. Latent conditioning of the air supplied to the space shall be performed at the dedicated outdoor air unit and controlled by exhaust air humidity sensors.

2.03 CASINGS

A. The entire unit shall be constructed of 20 gauge galvanized G90 sheet metal. The primary air plenum and nozzles shall be designed and configured to provide uniform air distribution with low noise operation to all nozzles.

2.04 WATER COIL ASSEMBLY

A. Coils shall be of the hot and chilled water type utilizing aluminum fins and copper tubes with integral manual air vent. Coils shall be factory leak tested at 350 PSI water. Coil connections shall be as indicated on the drawings. B. Coils must be one flat plate assembly with no interconnecting joints to minimize leakage. Each coil shall be of the fin plate design surrounding the copper tube wall via fin spacing of 10 fins per inch.

2.05 PERFORMANCE

A. All chilled beam units shall be rated in accordance with EN 15116.

PART 3 – EXECUTION 3.01 INSTALLATION – GENERAL

A. Follow manufacturer’s installation instructions and recommendations for all equipment. B. Install chilled beam units in ceiling in such a manner as to allow easy access to all controls. C. Using the hanging brackets on each unit supplied by the manufacturer, attach chilled beam units to supporting structure using field supplied threaded rod or other secure hanging system. D. Provide primary supply air connection and seal with duct sealer after installation. A volume control balancing damper shall be installed at the branch takeoffs for each chilled beam for the air balancing contractor. E. Provide water supply/return connection and install temperature control valve.

Titus by Schako


Chilled Beam

Linear Active Chilled Beams (continued)

• LCBS is a linear active chilled beam diffuser with 1-way air distribution. LCBS

• Unique linear design provides high capacity, high induction and low noise levels. • Available in cooling & supply air (CO) or cooling, heating & supply air (CH) configurations. • Integrated dew-point safety pan. • Return section of diffuser removable without tools; providing access to interior of unit. • Water coils supplied with manual air vents. • Accessories include disposable or washable filter, and plenum rated float switch for safety pan.

• Standard finish is #26 white paint on diffuser face. • Diffuser is designed to fit into standard 12” x18”, 24” x 48”, or 24” x 24” modular ceiling grids. • Factory supplied hanging brackets. • Casing constructed of 20 GA galvanized steel.

DESCRIPTION

INSTALLATION

The LCBS 1-way active chilled beam diffusers are designed for removing high thermal loads from the space. Supplied with tempered and dehumidified primary air, to handle the latent load, the beam addresses the remaining loads in the space with a heat exchanger installed in the unit. Decoupling the latent and sensible loads takes advantage of the superior volumetric heat capacity of water. The reduced the volume of air that must be delivered to the space results in reducing air handler capacity and size, smaller duct sizes, and overall energy savings.

In order to achieve a uniform cooling capacity, the beams should be connected to the cold water distribution system in parallel. It is recommended that LCBS units are connected to the supply air duct system delivering a constant volume of primary air to maintain optimum induction. When integrated with room controllers, the units can be used both for single room and zone control.

In the primary distribution channel, high density polyethylene injection molded nozzles are precisely arranged. There are three available nozzle sizes allowing optimum selection of the primary supply air volume. By reducing the primary air to meet the minimum requirements for either room ventilation or latent load in the space, total system energy costs are reduced.

The LCBS chilled beams are highly configurable, making them the perfect solution for all applications. These products have been designed to address heating and cooling loads in the space, with either a 2-pipe or 4-pipe system. LCBS units are supplied with a dew-point safety pan and are available with optional safety overflow switches.

U

ADVANTAGES • Removal of high thermal loads is possible in this air/water system. • The size of the supply duct system is minimized due to reduced primary air requirements. • Substantial reduction in the operating costs due to low primary air volume. • Improved thermal comfort inside the space. • Individual adjustment of the primary air volume by means of the nozzle size. • Suitable for all standard ceiling grids.

CLEANING OF THE GRILLE/COIL To clean the grille and the coil, locate spring loaded retaining pins. Slide diffuser face towards spring retainers until pins on opposite side clear the unit frame. Diffuser face will now be able to swing down for removal. Do not use any scouring agents for cleaning these components; damage to the unit construction materials (galvanized steel, aluminum and copper) and the surface coatings (paint and anodized surfaces) may occur. After completion of maintenance, grille must be returned to its original operating position.

LCBS

The primary air, supplied by the air distribution system is supplied to the mixing chamber via induction nozzles. In the mixing chamber, room air is induced over a vertically mounted heat exchanger, to address sensible loads in the space. The vertical orientation of the coil allows for induction through all sides of the water coil. The primary air is mixed with the cooled secondary air and distributed in to the room through a 1-way multiple louver diffuser supplied with the unit.

www.titus-hvac.com | www.titus-energysolutions.com

LCBS

U43 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

Linear Active Chilled Beams (continued)

HOUSING

• 20-gauge galvanized sheet metal construction.

RETURN AIR CHAMBER

• Anti-microbial insulation.

SUPPLY AIR PLENUM/CONNECTION

• One insulated supply air plenum/primary air chamber. • Round primary air connection.

INDUCTION NOZZLES

DEW-POINT SAFETY PAN

• Units have one 3/4” CPVC dewpoint safety pan connection. • Sloped bottom.

DIFFUSER FACE

• Lay-in. • Surface mounted.

PRESSURE TAP

• Units are supplied with a pressure tap on the primary air collar for balancing.

• High density polyethylene nozzles - three available sizes.

COILS

• 2-Pipe. • 4-Pipe. • Sheet Metal: 16 gauge galvanized. • Fins: 10 aluminum fins per inch. • Leak tested to 350 PSI.

LCBS

U

CONSTRUCTION

U44 Titus by Schako


Chilled Beam

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

LCBS 12 X 48 1/2" FPT CWR 1/2" FPT CWS

45 1/8

1/2" FPT HWR

1/2" FPT HWR 10" 1/2" FPT HWS

11 7/8

7 13 8 "

4" PRIMARY AIR CONNECTION

3 48" 3/4" PVC DRAIN

3 47 4 "

1/2" FPT HWS

3 11 4 "

U LCBS 24 X 48

12 1/2"

1/2" HOLES FOR HANGING (TYP 4 PLACES)

45 1/4"

1/2" FPT HWR

2 3/4

Ø 6"

2 5/32 3 3/4

4 1/4"

3 3/4" 3 1/4"

2 1/8" 6 5/8 23 3/4"

1 3/4" 9 3/4"

3/4" PVC DRAIN

4 3/8"

22 17/32

1/2" FPT HWS

2 1/4

7 3/4"

1/2" FPT CWR

1/2" FPT CWS

47 3/4"

2 1/8"

4 3/8"

7 3/4

1 3/32" 21" 23 3/4"

47 3/4" 45 1/4"

DIMENSIONS

8 5/8"

1 1/16

23 3/4"

21 3/32

12 1/2"

8 7/8

6 3/4

22 1/2

U45 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS LCBS 24 X 24 Ø 4"

INDUCTION UNIT COIL

1 1/8 5 1/2

RETURN AIR PLENUM

12 1/2 9 1/2

3/4" PVC DRAIN

5 1/2 1 3/4

FIELD SUPPLIED HANGING ROD (QTY OF 4)

23 3/4

Model TCMS (Side View) 20 7/8 1/2" FPT HWR

1/2" FPT CWR

U

16 1/2

1/2" FPT CWS

16 1/2 1/2" FPT HWS

HANGING BRACKET (LOCATED ON ALL SIDES) 23 3/4

DIMENSIONS

Model LCBS (Front View)

U46 Titus by Schako


Chilled Beam

PERFORMANCE DATA

Size

Nozzle Type

[ft] LF 24 x 24 HF

LF

12 x 48

MF

HF

LF 1 Row

LF 2 Row

MF 1 Row 24 x 48 MF 2 Row

HF 1 Row

HF 2 Row

Primary Air

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.4

39

1768

1164

2932

2125

NC20

10

0.7

48

2124

1339

3463

2481

NC26

18

1.0

57

2469

1545

4014

2838

NC31

16

0.4

64

2734

1702

4436

3101

NC20

12

0.7

84

3474

2093

5567

3693

NC30

18

1.0

100

4051

2388

6439

4100

NC35

17

0.4

26

1230

892

2122

1817

NC27

22

0.7

36

1699

1251

2950

2545

NC33

22

1.0

44

2068

1510

3578

3088

NC38

22

0.4

42

1975

1432

3407

2937

NC27

22

0.7

57

2605

1887

4492

3848

NC33

22

1.0

71

3160

2274

5434

4606

NC38

22

0.4

61

2767

2003

4770

4078

NC27

22

0.7

83

3618

2580

6198

5179

NC33

22

1.0

102

4317

3042

7359

6010

NC38

22

0.4

30

1419

1032

2451

2179

NC27

22

0.7

37

1747

1275

3022

2645

NC33

22

1.0

44

2068

1510

3578

3088

NC38

18

0.4

59

2687

1937

4624

3942

NC27

22

4.70

6.40

3.90

5.20

NC Sound

Throw T100

0.7

75

3311

2365

5676

4777

NC33

22

1.0

89

3842

2726

6568

5449

NC38

18

0.4

49

2280

1651

3931

3367

NC27

22

0.7

61

2767

2003

4770

4078

NC33

22

1.0

74

3272

2427

5699

4947

NC38

18

0.4

95

4058

2884

6942

5744

NC27

22

0.7

121

4995

3493

8488

6771

NC33

22

1.0

147

5903

4108

10011

7715

NC38

18

0.4

64

2886

2083

4969

4236

NC27

22

0.7

83

3618

2580

6198

5179

NC33

22

1.0

102

4317

3042

7359

6010

NC38

18

0.4

126

5177

3603

8780

6935

NC27

22

0.7

160

6302

4616

10918

8566

NC33

22

203

7863

5074

12937

9050

NC38

18

6.40

www.titus-hvac.com | www.titus-energysolutions.com

LCBS 2 PIPE

5.30

U

PERFORMANCE BASED ON: Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

PERFORMANCE DATA

COOLING:

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

U47 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA LCBS 4 PIPE Size

Nozzle Type

[ft] LF 24 x 24 HF

LF

12 x 48

MF

HF

U

LF 1 Row

LF 2 Row

MF 1 Row 24 x 48 MF 2 Row

HF 1 Row

PERFORMANCE DATA

HF 2 Row

Primary Air

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.4

39

1768

1164

2932

1298

NC20

10

0.7

48

2124

1339

3463

1408

NC26

18

1.0

57

2469

1545

4014

1503

NC31

16

0.4

64

2734

1702

4436

1561

NC20

12

0.7

84

3474

2093

5567

1629

NC30

18

1.0

100

4051

2388

6439

1635

NC35

17

0.4

26

1193

813

2005

1203

NC27

22

0.7

36

1641

1138

2779

1455

NC33

22

1.0

44

1995

1375

3370

1579

NC38

22

0.4

42

1906

1305

3211

1537

NC27

22

0.7

57

2500

1685

4185

1739

NC33

22

1.0

71

3028

2000

5028

1850

NC38

22

0.4

61

2654

1780

4434

1779

NC27

22

0.7

83

3470

2247

5717

1899

NC33

22

1.0

102

4152

2616

6768

1927

NC38

22

0.4

30

1372

941

2313

1309

NC27

22

0.7

37

1690

1164

2854

1459

NC33

22

1.0

44

1995

1375

3370

1579

NC38

18

0.4

59

2577

1726

4303

1751

NC27

22

0.7

75

3175

2074

5249

1862

NC33

22

1.0

89

3691

2366

6057

1913

NC38

18

0.4

49

2194

1492

3686

1640

NC27

22

0.7

61

2654

1780

4434

1779

NC33

22

1.0

74

3130

2123

5253

1927

NC38

18

0.4

95

3902

2493

6395

1931

NC27

22

0.7

121

4829

2980

7809

1911

NC33

22

1.0

147

5738

3465

9203

1838

NC38

18

0.4

64

2765

1845

4610

1801

NC27

22

0.7

83

3470

2247

5717

1899

NC33

22

1.0

102

4152

2616

6768

1927

NC38

18

0.4

126

5006

3064

8070

1894

NC27

22

0.7

160

6198

3612

9810

1883

NC33

22

1.0

203

7863

3965

11828

1457

NC38

18

4.70

4.20

4.20

0.20

0.20

0.20

NC Sound

Throw T100

PERFORMANCE BASED ON: COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

U48 Titus by Schako


Chilled Beam

SUGGESTED SPECIFICATIONS

1.01 SUMMARY

A. This section describes active ceiling mounted chilled beams. B. Model LCBS – Size 48” x 24”, 48” x 12”, and 24” x 24”

1.02 SUBMITTALS

A. Submit as specified herein. B. Submit for review: • a. Product data for all items. Data shall be complete with the following information: 1. Operating weight and dimensions of assembled units. 2. Performance data, including water-tube, airflow, water pressure drop, air-side pressure drop, and noise and air velocities. 3. Construction details, including materials of construction and fastening methods.

PART 2 – PRODUCTS 2.01 MANUFACTURERS

• A. Units shall be model LCBS with a [48” x 24”] [48” x 12”][24” x 24”] diffuser with one way linear air pattern as specified on drawings. • B. Considering the innovative technology utilized to engineer and manufacturer the applied equipment specified for this project the following substitution considerations shall apply to any manufacture requesting prior approval: a. Fifteen day prior to bid date any manufacturer who would like to be considered shall submit the following information via certified mail to the design professional. b. Submittal documentation for every product proposed including schedule and performance date for each with physical and thermal calculations. c. Any and all costs associated with using a substituted product shall be the responsibility of the Mechanical contractor. This includes but is not limited to redesign fees, additional piping and ductwork, and controls required.

2.02 GENERAL

U

2.03 CASINGS

A. The entire unit shall be constructed of 20 gauge galvanized G90 sheet metal. The primary air plenum and nozzles shall be designed and configured to provide uniform air distribution with low noise operation to all nozzles.

2.04 INDUCTION NOZZLES

A. Induction nozzles shall be aerodynamically designed and made of HDPE Petrothene plastic (Hytrel 4069). Each nozzle shall incorporate a tapered design allowing the airflow to enter the nozzle more effectively and perform more efficiently without dirt build up.

2.05 WATER COIL ASSEMBLY

A. Coils shall be of the hot and chilled water type utilizing aluminum fins and copper tubes with integral manual air vent. Coils shall be factory leak tested at 350 PSI water. Coil connections shall be as indicated on the drawings. B. Coils must be one flat plate assembly with no interconnecting joints to minimize leakage. Each coil shall be of the fin plate design surrounding the copper tube wall via fin spacing of 10 fins per inch. The coil tubes shall be designed with .016 thick copper walls. Titus by Schako

SPECIFICATIONS

A. It is the design intent of these specifications to provide a fully integrated HVAC system with all parts working together. These induction units need clean, dehumidified primary air from a dedicated outdoor air unit, hot and chilled water from a boiler and chiller, piping, and controls to coordinate each component to perform as intended. In addition to the items mentioned above that are specified on other sections in division 15, wiring and power requirements in division 16 may also be impacted. Changes, modifications, or substitutions on any component will impact all the other parts of the system and cannot be made without a careful review of all related specifications. Chilled beam unit shall be constant volume primary airflow units designed to induce a secondary airflow within the conditioned space using the primary conditioned air supply. Units shall be designed for ceiling installation with factory

supplied hanging brackets. Hanger rods or other approved hanging system to be field supplied and installed in the field by installing contractor. C. Units shall be equipped with a [6”][4”] round low velocity pressure inlet transition, one air plenum and air induction nozzle plate, a supply and return chilled water piping connection, [one supply and return hot water piping connection], one 3/4” condensate drain connection, and one combination supply/return air grille for effective room air distribution. The grille shall have a removable center core to provide full access to the return air side of the coil. The unit shall be capable of inducing the secondary airflow within the conditioned space using the velocity pressure of the primary airflow. This secondary air must flow directly from the room to the unit and shall not use the ceiling as a return air plenum. Active beam units using the ceiling plenum as a return air path are not acceptable. D. Each LCBS unit shall be equipped with a multiple row water coil for chilled water and hot water. Latent conditioning of the air supplied to the space shall be performed at the dedicated outdoor air unit and controlled by exhaust air humidity sensors. E. For non-drainable applications, a sloped 1 1/2” deep drainable condensate pan shall be standard [with a UL recognized safety float switch shipped loose for field installation by the installing contractor. Wiring of the float switches to be done by contractor in field.] F. The LCBS unit shall be supplied with a [23 ¾” by 23 ¾”] [47 ¾” by 23 ¾”][47 ¾” by 11 ¾”] supply/return diffuser to evenly distribute the mixed primary air in 1-way throw pattern. The diffuser shall fit into a standard ceiling grid. Single slot linear diffusers are not acceptable. The diffuser shall fit into a standard ceiling grid. The return portion of the diffuser shall be removable for access to interior of unit without tools. Water connections are female national pipe copper thread connections 1/2” in size.

www.titus-hvac.com | www.titus-energysolutions.com

PART 1 – GENERAL

U49


www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

Chilled Beam

C. The water coil assembly shall consist of a two row or three row .016 thick copper tube wall and aluminum fins for cooling and one row coil for heating. The heating coil row shall be mounted on the return side of the cooling. A drainable condensate pan shall be provided to collect any condensate that might form. Drip trays are unacceptable as a drain pan. D. Control valves for cooling and heating can control one or more induction units in a given zone.

2.06 QUALITY ASSURANCE

A. All chilled beam units shall be tested by an independent nationally recognized testing laboratory for coil performance, throws, and sound levels.

PART 3 – EXECUTION 3.01 INSTALLATION – GENERAL

SPECIFICATIONS

U

A. Follow manufacturer’s installation instructions and recommendations for all equipment. B. Install chilled beam units in ceiling in such a manner as to allow easy access to all controls. C. Using the hanging brackets on each unit supplied by the manufacturer, support chilled beam units to supporting structure using field supplied threaded rod or other secure hanging system. D. Provide primary supply air connection and seal with duct sealer after installation. A volume control balancing damper shall be installed at the branch takeoffs for each chilled beam for the air balancing contractor. A static pressure port is factory supplied on the aerodynamic inlet fitting so the balancing contractor can read via a pressure airflow gage the inlet pressure to the induction terminal and set the proper pressure to meet the scheduled airflow/pressure. E. Provide water supply/return connection and install temperature control valve. F. Connect the condensate drain to available building drains as required on plans.

U50 Titus by Schako


Chilled Beam

• TCM2 is a modular active chilled beam diffuser with 4-way air distribution. TCM2

• Unique linear design provides high capacity, high induction and low noise levels. • Available in cooling & supply air (CO) or cooling, heating & supply air (CH) configurations. • Integrated dew-point safety pan.

• Diffuser face on 48” x 48” unit is shipped loose for field mounting. The 24” x 24” unit ships complete.

• Supply/Return diffuser removable with out tools; providing access to interior of unit.

• Factory supplied hanging brackets.

• Accessories include disposable or washable filter, and plenum rated float switch for drain pan.

• Casing constructed of 20 GA galvanized steel. • Closed cell, anti-microbial poly foam insulation.

• Standard finish is #26 white paint on diffuser face.

DESCRIPTION The TCM2 4-way active chilled beam diffusers are designed for removing high thermal loads from the space. This model was designed specifically to meet the unique requirements of high population density spaces; depending on the unit size, the TCM2 can handle between 60 and 475 CFM of ventilation (primary) air. Supplied with tempered and dehumidified primary air, to handle the latent load, the beam addresses the remaining loads in the space with a heat exchanger installed in the unit. Decoupling the latent and sensible loads takes advantage of the superior volumetric heat capacity of water. The reduced the volume of air that must be delivered to the space results in reducing air handler capacity and size, smaller duct sizes, and overall energy savings. In the primary distribution channel, high density polyethylene injection molded nozzles are precisely arranged. There are three available nozzle sizes allowing optimum selection of the primary supply air volume. By reducing the primary air to meet the minimum requirements for either room ventilation or latent load in the space, total system energy costs are reduced.

The TCM2 chilled beams are highly configurable, making them the perfect solution for all applications. These products have been designed to address heating and cooling loads in

the space, with either a 2-pipe or 4-pipe system. TCM2 units are supplied with a dew-point safety pan and are available with optional safety overflow switches.

U

INSTALLATION In order to achieve a uniform cooling capacity, the beams should be connected to the cold water distribution system in parallel. It is recommended that TCM2 chilled beams are connected to the supply air duct system delivering a constant volume of primary air to maintain optimum induction. When integrated with room controllers, the units can be used both for single room and zone control.

ADVANTAGES • Removal of high thermal loads is possible in this air/water system. • Designed to accommodate the ventilation requirements of high population density areas. • The size of the supply duct system is minimized, due to reduced primary air requirements. • Substantial reduction in the operating costs, due to low primary air volume. • Improved thermal comfort inside the space. • Individual adjustment of the primary air volume by means of the nozzle size. • Suitable for all standard ceiling grids.

CLEANING OF THE GRILLE/COIL To clean the grille and the coil, locate spring loaded retaining pins. Slide diffuser face towards spring retainers until pins on opposite side clear the unit frame. Diffuser face will now be able to swing down for removal. Do not use any scouring agents for cleaning these components; damage to the unit construction materials (galvanized steel, aluminum Titus by Schako

TCM2

The primary air, supplied by the air distribution system is supplied to the mixing chamber via induction nozzles. In the mixing chamber, room air is induced over a vertically mounted heat exchanger, to address sensible loads in the space. The vertical orientation of the coil allows for induction through all sides of the water coil. The primary air is mixed with the cooled secondary air and distributed in to the room through a 4-way concentric diffuser supplied with the unit.

www.titus-hvac.com | www.titus-energysolutions.com

Thermal Comfort Modules TCM2

U51


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

Thermal Comfort Modules (continued) and copper) and the surface coatings (paint and anodized surfaces) may occur. After completion of maintenance, grille must be returned to its original operating position.

DIFFUSER FACE

CONSTRUCTION

PRESSURE TAP:

HOUSING

• Lay-in • Surface mounted • Units are supplied with a pressure tap on the primary air collar for balancing

• 20-gauge galvanized sheet metal construction.

RETURN AIR CHAMBER:

• Anti-microbial insulation.

SUPPLY AIR PLENUM/CONNECTION:

• One insulated supply air plenum/primary air chamber. • Round primary air connection.

INDUCTION NOZZLES:

• Each unit contains one continuous 360 degree nozzle plate. • High density polyethylene nozzles – three available sizes.

COILS:

U

• • • • •

2-Pipe 4-Pipe Sheet Metal: 16 gauge galvanized Fins: 10 aluminum fins per inch Leak tested to 350 PSI

DEW-POINT SAFETY PAN:

TCM2

• Units have one 3/4” CPVC dew-point safety pan connection. • Sloped bottom

U52 Titus by Schako


Chilled Beam

DIMENSIONS

3/4" PVC DRAIN

23 3/4" 3/4" PVC DRAIN

Ø 4" 23 3/4"

Ø 4"

21 1/8"

23 3/4"

1/2" FPT HWR 20"

A

3/4" CWR

3/4" CWS

www.titus-hvac.com | www.titus-energysolutions.com

TCM2 24 X 24

1/2" FPT HWS

21" HANGAR BRACKET (ON BOTHS IDES)

U

Ø 1/2"

DETAIL A SCALE 1 : 4

6 9/16"

2 1/16"

13 15/16"

1"

3/4"

20 1/8"

10 1/16"

15 1/4" 9 3/16"

23 3/4"

3/4" PVC DRAIN

Note: dimensions are in inches or mm.

DIMENSIONS U53 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS TCM2 48 X 48

13 27/32" 9 9/16" 3 3/16"

47 3/4" 37 17/32"

3/4" PVC DRAIN CONNECTION

2"

13 13/32" 39 1/8"

47 3/4" 19 9/16"

37 9/16"

47 3/4"

10 13/16"

18 1/32"

2 1/2" 1/2" FPT HWR 3/4" FPT CWR

A

U

HANGING BAR (BOTH SIDES)

Ø 1/2"

4 1/4" 3 25/32"

3/4" FPT CWS 1/2" FPT HWS

DETAIL A SCALE 1 : 5 1"

3/4"

11"

35 5/8"

Ø 8"

4" 20"

17 29/32"

17 27/32" 11 17/32" 37 17/32" 47 3/4"

3/4" PVC DRAIN CONNECTION

DIMENSIONS

Note: dimensions are in inches or mm.

U54 Titus by Schako


Chilled Beam

PERFORMANCE DATA

Size

Nozzle Type

[ft] LF

24 x 24

MF

HF

LF

48 x 48

MF

HF

Primary Air

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.4

60

2602

1830

4432

3512

NC18

16

0.7

83

3439

2363

5802

4390

NC27

16

1.0

105

4216

2845

7061

5093

NC33

14

0.4

78

3261

2259

5520

4229

NC18

16

0.7

106

4253

2857

7110

5103

NC27

16

1.0

135

5229

3255

8484

5837

NC33

14

0.4

90

3692

2521

6213

4627

NC18

16

0.7

124

4879

3227

8106

5579

NC27

16

1.0

155

6004

3546

9550

6235

NC33

14

0.4

186

7555

5345

12900

9121

NC18

16

0.7

263

10188

6165

16353

10886

NC27

16

1.0

317

12279

6868

19147

11732

NC33

16

0.4

242

9374

5866

15240

10494

NC18

16

0.7

342

13248

7013

20261

11684

NC27

16

1.0

412

15959

7868

23827

12643

NC33

16

0.4

279

10807

6383

17190

11161

NC18

16

0.7

395

15301

7711

23012

12594

NC27

16

1.0

476

18438

8419

26857

12958

NC33

16

0.60

1.70

www.titus-hvac.com | www.titus-energysolutions.com

TCM2 2 PIPE

0.50

1.40

NC Sound

Throw T100

U

PERFORMANCE BASED ON: COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND: Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

PERFORMANCE DATA U55 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA TCM2 4 PIPE Size

Nozzle Type

[ft] LF

24 x 24

MF

HF

LF

48 x 48

U

MF

HF

Primary Air

Cooling

Heating

Ps

Vair

Qair

Dpw

Qcoil

QTotal

Dpw

QTotal

[in wg]

[CFM]

[BTUH]

[ft wg]

[BTUH]

[BTUH]

[ft wg]

[BTUH]

0.4

60

2602

1830

4432

2126

NC18

16

0.7

83

3439

2363

5802

2346

NC27

16

1.0

105

4216

2845

7061

2446

NC33

14

0.4

78

3261

2259

5520

2317

NC18

16

0.7

106

4253

2857

7110

2441

NC27

16

1.0

135

5229

3255

8484

2447

NC33

14

0.4

90

3692

2521

6213

2388

NC18

16

0.7

124

4879

3227

8106

2457

NC27

16

1.0

155

6004

3546

9550

2392

NC33

14

0.4

186

7555

5345

12900

4021

NC18

16

0.7

263

10188

6165

16353

3729

NC27

16

1.0

317

12279

6868

19147

3336

NC33

16

0.4

242

9374

5866

15240

3852

NC18

16

0.7

342

13248

7013

20261

3025

NC27

16

1.0

412

15959

7868

23827

2415

NC33

16

0.4

279

10807

6383

17190

3624

NC18

16

0.7

395

15301

7711

23012

2598

NC27

16

1.0

476

18438

8419

26857

1691

NC33

16

0.60

1.70

0.20

0.60

NC Sound

Throw T100

PERFORMANCE BASED ON: COOLING:

Room Air Temperature = 75BF Primary Air Temperature = 55BF Water Supply Temperature = 57BF Water Flow Rate = 1.25 gpm

HEATING:

Ps Vair Qair Qcoil QTotal Dpw

-

Unit Inlet Pressure [in wg] Primary Air Flow Rate [CFM] Capacity, Primary Air [BTUH] Capacity, Water Coil [BTUH] Capacity, Unit Total [BTUH] Water Coil Pressure Drop [ft wg]

PERFORMANCE DATA

Room Air Temperature = 70BF Primary Air Temperature = 55BF Water Supply Temperature = 120BF Water Flow Rate = 0.5 gpm

LEGEND:

U56 Titus by Schako


Chilled Beam

SUGGESTED SPECIFICATIONS

1.01 SUMMARY

A. This section describes active chilled beams.

1.02 SUBMITTALS

A. Submit as specified herein. B. Submit for review: • a. Product data for all items. Data shall be complete with the following information: 1. Operating weight and dimensions of assembled units. 2. Performance data, including water-tube, airflow, water pressure drop, air-side pressure drop, and noise and air velocities. 3. Construction details, including materials of construction and fastening methods.

PART 2 – PRODUCTS 2.01 MANUFACTURERS

• A. Units shall be model TCM2 with supplied [24” x 24”] [48” x 48”] diffuser as specified on drawings. • B. Considering the innovative technology utilized to engineer and manufacturer the applied equipment specified for this project the following substitution considerations shall apply to any manufacture requesting prior approval: a. Fifteen day prior to bid date any manufacturer who would like to be considered shall submit the following information via certified mail to the design professional. b. Submittal documentation for every product proposed including schedule and performance date for each with physical and thermal calculations. c. Any and all costs associated with using a substituted product shall be the responsibility of the Mechanical contractor. This includes but is not limited to redesign fees, additional piping and ductwork, and controls required.

2.02 GENERAL

U

2.03 CASINGS

A. The entire unit shall be constructed of 20 gauge galvanized sheet metal. The primary air plenum and nozzles shall be designed and configured to provide uniform air distribution with low noise operation to all nozzles. B. The air diffuser shall be removable for access to the interior coil area for cleaning.

2.04 INDUCTION NOZZLES

A. Induction nozzles shall be aerodynamically designed and made of HDPE Petrothene plastic (Hytrel 4069). Each nozzle shall incorporate a tapered design allowing the airflow to enter the nozzle more effectively and perform more efficiently without dirt build up.

SPECIFICATIONS

A. It is the design intent of these specifications to provide a fully integrated HVAC system with all parts working together. These induction units need clean, dehumidified primary air from a dedicated outdoor air unit, hot and chilled water from a boiler and chiller, piping, and controls to coordinate each component to perform as intended. In addition to the items mentioned above that are specified on other sections in division 15, wiring and power requirements in division 16 may also be impacted. Changes, modifications, or substitutions on any component will impact all the other parts of the system and cannot be made without a careful review of all related specifications. B. Chilled beam unit shall be constant volume primary air flow units designed to induce a secondary airflow within the conditioned space using the primary conditioned air supply. Units shall be designed for ceiling installation with factory supplied hanging brackets. Hanger rods or other approved hanging system to be field supplied and installed in the field

by installing contractor. C. Units shall be equipped with round duct primary air intake, one air plenum and air induction nozzle plate, one chilled/hot water coil, a supply and a return chilled water piping connection, a supply and a return hot water piping connection, one 3/4” condensate drain connection, and one combination supply/return air grille for effective room air distribution. The grille shall have a removable center core to provide full access to the return air side of the coil. The unit shall be capable of inducing the secondary airflow within the conditioned space using the velocity pressure of the primary airflow. This secondary air must flow directly from the room to the unit and shall not use the ceiling as a return air plenum. Active beam units using the ceiling plenum as a return air path are not acceptable. D. Each TCM2 unit shall be equipped with one water coil for chilled water and for hot water. Latent conditioning of the air supplied to the space shall be performed at the dedicated outdoor air unit and controlled by exhaust air humidity sensors. E. Each TCM2 unit shall consist of one primary air connection, one nozzle plenum with a set of air induction nozzles, one chilled water and hot water coil, water piping connections, a condensate drain connection and supply/return air grille. [For non-drainable applications, a drainable condensate pan with a safety float switch attached to the drain pan shall be provided by the induction unit manufacturer to shut off the chilled water coil if condensate should accumulate.] F. The TCM2 unit shall be supplied with a [23 ¾” by 23 ¾”] or [47 ¾” by 47 ¾”] supply/return diffuser to evenly distribute the mixed primary air in a 360 degree pattern. The diffuser shall fit into a standard ceiling grid. The center portion of the diffuser for return air shall be removable for access to interior of unit without tools. The primary air connection is a single [4”] or [8”] diameter duct collar which directs the primary air to the nozzles. Water connections are female national pipe thread connections. G. The TCM2 unit has one drain pan. This drain pan must be [1 ½”] or [2”] in depth and sloped in the direction of the condensate connection.

www.titus-hvac.com | www.titus-energysolutions.com

PART 1 – GENERAL

2.05 WATER COIL ASSEMBLY

A. Coils shall be of the hot and chilled water type utilizing aluminum fins and copper tubes with integral manual air vent. Copper tube wall shall be a minimum .033 thickness. Titus by Schako

U57


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS Coils shall be factory leak tested at 350 PSI water. Coil connections shall be as indicated on the drawings. B. Coil must be one continuous assembly to minimize leakage. C. The water coil assembly shall consist of a two row copper tube and aluminum fins coil for cooling and one row coil for heating. A drainable condensate pan shall be provided. D. Control valves for cooling and heating can control one or more chilled beams in a given zone. E. Coils must be one flat plate assembly with no interconnecting joints to minimize leakage. Each coil shall be of the fin plate design surrounding the copper tube wall via fin spacing of 10 fins per inch. The coil tubes shall be designed with .016 thick copper walls.

2.06 QUALITY ASSURANCE

A. All chilled beam units shall be tested by an independent nationally recognized testing laboratory for coil performance, throws, and sound levels.

PART 3 – EXECUTION 3.01 INSTALLATION - GENERAL

A. Follow manufacturer’s installation instructions and recommendations for all equipment. B. Install chilled beam units in ceiling in such a manner as to allow easy access to all controls. C. Using the hanging brackets on each unit supplied by the manufacturer, support chilled beam units to supporting structure using field supplied threaded rod or other secure hanging system. D. Provide primary supply air connection and seal with duct sealer after installation. E. Provide water supply/return connection and install temperature control valve. F. Connect the condensate drain to available building drains if required on plans.

SPECIFICATIONS

U

U58 Titus by Schako


Chilled Beam

• SPB is a linear passive chilled beam diffuser.

SPB

• Unique design accommodates both recessed and exposed mounting. • Available in 2-pipe configuration. • Available as diffuser shell (no coil/piping). • Standard finish is RAL 9010 white paint on diffuser face.

DESCRIPTION Passive chilled beams are primarily used to provide comfortable sensible cooling, and can be used in many heating applications as well. The primary mode of heat transfer is by convection, with a percentage of heat transfer transmitted through radiation. During cooling, warm room air rises to the ceiling area; cool air around the coil sinks down to the occupied area as a result of the higher density. As the cool air descends in to the space, more warm air is drawn over the coil creating a convective current that drives the system. The exposed face of the passive beam is constructed from either painted perforated stainless steel, or a linear bar grille. The cooling strips are available in lengths of 4 feet to 14 feet in intervals of 2 feet. The beams are designed for integration into a suspension ceiling or for exposed mounting, suspended below the ceiling surface.

ADVANTAGES • SPB models designed to accommodate recessed or exposed installation with a single model. • Easy cleaning of the water coil and the housing. • Quick and simple installation. • Provide comfortable, effective heating and cooling to the space.

The diagram shows the approximate cooling capacity Pc in BTUH at a water flow rate of 0.8 gpm and a temperature difference between room air and the average water temperature of 14.5° F.

MOUNTING INFORMATION Mounting brackets that can slide along the longitudinal axis are mounted on the beam, 2 per beam. Alternatively, mounting shackles can be provided with are fastened to the beam and rest on the T-shaped support profiles of the false ceiling having a center-to-center distance of 600 mm. This reduces the mounting time as well as the mounting costs. The number of shackles required per beam, depending on length, is noted in the table below. Beam Length

Shackles required

4 to 6

2

8 to 10

3

12 to 14

4

www.titus-hvac.com | www.titus-energysolutions.com

Linear Passive Chilled Beams SPB

U

Quick selection chart

SPB U59

L (ft.) Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

Linear Passive Chilled Beams (continued)

CLEANING OF THE GRILLE/COIL The top side of the beam is open allowing direct access to cleaning the coil. The beam grilles are sectioned to allow access to the coil by pushing up individual sections and sliding them over an adjacent section. A vacuum with brush attachment is recommended for maximum effectiveness. Do not use any scouring agents for cleaning these components; damage to the unit construction materials (galvanized steel, aluminum and copper) and the surface coatings (paint and anodized surfaces) may occur. After completion of maintenance, grille must be returned to its original operating position.

PERFORATED SHEET GRILLE (-SR)

• Stainless steel painted to RAL 9010 (white). • 46% free area, round perforations.

LINEAR BAR GRILLE (-PA)

• Extruded aluminum profile painted to RAL 9010 (white).

WATER COIL

• Galvanized sheet steel frame. • Mechanically bonded aluminum fins. • Smooth copper tubes ø15 x 1.0 mm. • Integrated manual air vent. • Maximum working pressure, 200 psi.

ACCESSORIES UNIT EXTENSION

U CONSTRUCTION

• Available in lengths from ½ inch to 12 inches total unit length must not exceed 14 feet. • Used to adjust the beam length to match ceiling architecture, or when the strips are installed in rows or exposed applications, allowing for concealment of water connections. • Extension has open ends, allowing for piping to be passed through the extension piece. • The grille face can is easily removable for access to water connections.

HOUSING

SPB

• Galvanized sheet steel painted to RAL 9010 (white).

U60 Titus by Schako


Chilled Beam

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

SPB 17-IN NOMINAL WIDTH

Piping Configuration: 2-pipe connection (15 mm Dia.) located on end of diffuser Nominal Length

Actual Lengths (L)

4ft

3.9ft

6ft

5.9ft

8ft

7.9ft

10ft

9.8ft

12ft

11.8ft

14ft

13.8ft

U

Note: dimensions are in inches or mm.

DIMENSIONS U61 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS

U

SPB 12-IN NOMINAL WIDTH

Piping Configuration: 2-pipe connection (15 mm Dia.) located on end of diffuser Nominal Length

Actual Lengths (L)

4ft

3.9ft

6ft

5.9ft

8ft

7.9ft

10ft

9.8ft

12ft

11.8ft

14ft

13.8ft

DIMENSIONS

Note: dimensions are in inches or mm.

U62 Titus by Schako


Chilled Beam

PERFORMANCE DATA Cooling capacity per unit length (BTUH/ft) PC0.8 for passive beams, SPB

AMOUNT OF WATER = 0.8 GPM (BTU/Hr.ft)

Please note! This diagram is based on tests according to the Nordtest method, which are conducted with a very small temperature difference between air entering the beam and the average room temperature 3.5 feet above the floor. For installations with concentrated sources of heat at or near the ceiling, the actual temperature difference 2 to 4BF. In this case, beams should be selected taking this into consideration. In practice, the strip will have a higher capacity based on the increased temperature difference.

www.titus-hvac.com | www.titus-energysolutions.com

TECHNICAL DATA - COOLING

U LEGEND: Pc L Pco8 Dt Dtw qw Dpw W

-

Capacity [BTUH] Length, Nominal [ft] Capacity @ 0.8 gpm per length [BTUH/ft] Temperature difference, avg. water temperature vs. room air temperature [BF] Temperature difference, entering water temperature vs. leaving water temperature [BF] Water flow rate [gpm] Water Coil Pressure Drop [ft wg] unit width [in]

CORRECTION OF THE COOLING EFFECT OF AMOUNTS OF WATER UNEQUAL TO 0.8 GPM

PERFORMANCE DATA U63 Titus by Schako


www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

Chilled Beam

AMOUNT OF WATER (GPM)

(BTUH)

U

PERFORMANCE DATA

PRESSURE DROP, WATER (FT WG)

U64 Titus by Schako


PERFORMANCE DATA Criteria/design conditions: Max. length of strip - 14 feet Required cooling capacity - 2400 BTUH Room air temperature - 75BF Entering water temperature - 57BF Leaving water temperature - 61BF

A correction must be made to the beam performance based on the diagram below to adjust for water flow rates other than 0.8 gpm is K = Pc1.3 vs Pc0.8 = 1.04. Thus, due the higher amount of water, the actual capacity is 4% higher than the value shown in the diagram. Pc = 1.04 x 215 = 224 BTUH/ft. Required effective length (coil length) Leff = 2400/223 = 10.8ft.

Solution: Mean coil temperature = (57+61)/2 = 59BF Difference between room air temperature and mean coil temperature Dt = 75-59 = 16BF. According to the diagram below, the cooling capacity, PC0.8 for the 17-inch wide beam at a water flow rate of 0.8 gpm is 215 BTUH/ft. (BTU/Hr.ft)

Minimum unit length = 10.8ft + .3ft = 11.1ft. The next larger beam length, of 12 feet will be required to provide the required cooling in the space.

www.titus-hvac.com | www.titus-energysolutions.com

SELECTION EXAMPLE

Chilled Beam

U

According to the water coil pressure drop diagrams, the pressure loss, based on unit effective length (Leff) of the above the beam in this selection example Dpw is 4.35 ft wg.

In the capacity versus water flow rate diagram the amount of water qw is 1.3 gpm at Dtw = 4BF and the cooling capacity is 2400 BTUH. (BTUH)

PERFORMANCE DATA U65 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS PART 1 – GENERAL 1.01 SUMMARY

A. This section describes passive ceiling mounted chilled beams.

1.02 SUBMITTALS

A. Submit as specified herein. B. Submit for review: • a. Product data for all items. Data shall be complete with the following information: 1. Operating weight and dimensions of assembled units. 2. Performance data, including water flow rate and water pressure drop. 3. Construction details, including materials of construction and fastening methods.

PART 2 – PRODUCTS

U

2.01 MANUFACTURERS

• A. Units shall be model SPB with lengths and widths as specified on drawings. • B. Considering the innovative technology utilized to engineer and manufacturer the applied equipment specified for this project the following substitution considerations shall apply to any manufacture requesting prior approval: a. a. Fifteen day prior to bid date any manufacturer who would like to be considered shall submit the following information via certified mail to the design professional. b. b. Submittal documentation for every product proposed including schedule and performance date for each with physical and thermal calculations. c. c. Any and all costs associated with using a substituted product shall be the responsibility of the Mechanical contractor. This includes but is not limited to redesign fees, additional piping and ductwork, and controls required.

2.03 CASINGS

A. The entire unit shall be constructed of 20 gauge galvanized G90 sheet metal, painted RAL 9010 (white).

2.05 WATER COIL ASSEMBLY

A. Coils shall be of the chilled water type utilizing aluminum fins and copper tubes with integral manual air vent. Coils shall be factory leak tested at 350 PSI water. Coil connections shall be as indicated on the drawings. B. Coils must be one flat plate assembly with no interconnecting joints to minimize leakage. Each coil shall be of the fin plate design surrounding the copper tube wall via fin spacing of 9 fins per inch.

PART 3 – EXECUTION 3.01 INSTALLATION - GENERAL

A. Follow manufacturer’s installation instructions and recommendations for all equipment. B. Install chilled beam units in ceiling in such a manner as to allow easy access to all controls. C. Using the hanging brackets on each unit supplied by the manufacturer, support chilled beam units to supporting structure using field supplied threaded rod or other secure hanging system. D. Provide water supply/return connection and install temperature control valve.

SPECIFICATIONS

2.02 GENERAL

A. Units shall be designed for ceiling installation with factory supplied hanging brackets. Hanger rods or other approved hanging system to be field supplied and installed in the field by installing contractor. C. A supply and return chilled water piping connection, and grille fascia. The grille shall be designed in such a way where sections can be removed to provide full access to the water coil. D. Each unit shall be equipped with a multiple row water coil for chilled water and hot water. Latent conditioning of the air supplied to the space shall be performed at the dedicated outdoor air unit and controlled by exhaust air humidity sensors.

U66 Titus by Schako


Chilled Beam

• Constructed from extruded aluminum profiles. • Single circuit for each sail as ordered; hard copper connection between individual blades. • Standard finish is RAL 9010 white powder coating.

ALPETY HKL

ALPETY FKL

• FKL and HKL are architectural radiant ceiling products.

• Supplied with mounting equipment for fixed on site installation. • Available with hinged mounting equipment allowing sails to swing down up to 45B.

• 15mm diameter pipe connections.

DESCRIPTION The Alpety radiant ceiling systems are water driven radiation systems whose advantages include silent cooling, low energy consumption, and create a high degree of thermal comfort through draft free cooling and even temperature distribution in the space. However, it must be taken into account that these systems must be supported by additional mechanical ventilation and means to address the latent cooling requirements of the space.

U

ADVANTAGES • Radiant heat transfer increases occupancy comfort. • Reduces energy consumption by utilizing heat transfer capacity of water. • Minimize airflow and noise in the space. • Quick and simple installation. • Several models integrate seamlessly in to any architecture.

ALPETY (FKL, HKL)

Radiant ceilings systems emit heating and cooling by both convection and radiation. During cooling, ambient air near the ceiling cools and falls to the occupied area, due to its higher density. In contrast, the ambient air heated by heat sources located in the room will rise. This gives rise to convection currents with very low flow velocities. Furthermore, the ceiling emits cooling and heating to the surrounding surfaces in the area by radiation. When radiation reaches one of these surfaces, the radiant energy is absorbed by that surface. The radiant heat transfer from the panels to surfaces and/or occupants in the room will occur regardless of the ambient air temperature. Radiant heat transfer results in high thermal comfort and leads to the ambient temperature feeling cooler than it actually is during cooling and warmer in heating. Depending on the percentage of the active ceiling surface to the overall surface of the room (including floor, walls, windows, furniture, etc.) the temperature perceived by the occupant will be 2.5 to 5 degrees cooler/warmer than it actually is. This effect has the advantage that the room requires less conditioning than a traditional system, introducing an additional opportunity for energy savings.

In conjunction with the customer’s own metal or acoustic ceiling tiles, the Alpety ceiling elements can be integrated in the room to create the ceiling façade, models FKL and HKL, or in combination with suspended ceiling systems with SKS models. The individual ceiling elements are usually joined to one another using flexible hoses. Connections can also be made using hard copper piping and soft soldering.

www.titus-hvac.com | www.titus-energysolutions.com

Radiant Ceiling Panels ALPETY (FKL, HKL)

Since the sensible cooling no longer has to be introduced into the room along with ventilation air, the volume of air supplied can be reduced to the meet the fresh air requirements. By reducing the volume of air supplied the possibility of drafts and noise levels are greatly reduced. This leads to increased occupancy comfort. Addressing thermal loads using the Alpety products makes use of the increased heat transfer capacities of water, as compared to air, increasing overall system efficiency.

U67 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS ALPETY (FKL, HKL)

U Model

FKL HKL

Blade Width (LB)

Pipe Spacing (A)

2 Blades

3 Blades

4 Blades

5 Blades

6 Blades

5 1/4

6

11 1/4

17

23

29

34 3/4

7

7 3/4

15

22 3/4

30 3/4

38 1/2

46 1/2

5 /4

6

11 /4

17

23

29

34 3/4

1

1

Available Nominal Lengths* (ft) 2 4

DIMENSIONS

6 8

*Actual length = Nominal Length - 1/4� Note: dimensions are in inches or mm.

U68 Titus by Schako


Chilled Beam

PERFORMANCE DATA

Alpety-FKL 134 Cooling output - based on percentage of active ceiling surface area (BTUH/ft2) ∆tm (F)

20%

25%

30%

35%

40%

45%

50%

55%

60%

65%

70%

75%

80%

9

20.0

19.7

19.7

19.3

19.0

18.7

18.4

18.1

17.4

17.1

16.8

16.5

15.9

11

24.7

24.4

24.1

23.8

23.5

22.8

22.5

22.2

21.6

21.2

20.6

20.3

19.7

13

29.5

29.2

28.5

28.2

27.9

27.3

27.0

26.3

25.7

25.1

24.7

24.1

23.5

14

34.6

33.9

33.6

33.0

32.7

32.0

31.4

30.8

30.1

29.5

28.9

28.2

27.3

16

39.6

39.0

38.4

37.7

37.4

36.8

36.1

35.2

34.6

33.6

33.0

32.3

31.4

18

44.4

43.8

43.1

42.5

41.9

41.2

40.3

39.6

38.7

37.7

37.1

36.1

35.2

20

49.2

48.5

47.9

47.2

46.6

45.7

45.0

44.1

42.8

42.2

41.2

40.3

39.0

22

54.2

53.6

53.0

52.0

51.4

50.4

49.5

48.5

47.2

46.3

45.3

44.4

43.1

www.titus-hvac.com | www.titus-energysolutions.com

ALPETY FKL

Alpety-FKL 180 Cooling output - based on percentage of active ceiling surface area (BTUH/ft2) ∆tm (F)

20%

25%

30%

35%

40%

45%

50%

55%

60%

65%

70%

75%

80%

9

20.0

19.7

19.7

19.3

19.0

18.7

18.4

18.1

17.4

17.1

16.8

16.5

15.9

11

23.8

23.8

23.5

23.1

22.5

22.2

21.9

21.2

20.9

20.6

20.0

19.7

19.0

13

28.5

28.2

27.9

27.6

27.0

26.6

26.0

25.7

25.1

24.7

24.1

23.5

22.5

14

32.7

32.3

32.0

31.7

31.1

30.8

30.1

29.5

28.9

28.2

27.6

27.0

26.0

16

37.7

37.4

37.1

36.5

35.8

35.2

34.6

33.9

33.3

32.7

31.7

31.1

30.1

18

42.2

41.9

41.2

40.6

40.0

39.3

38.7

37.7

37.1

36.5

35.5

34.6

33.6

20

46.6

46.3

45.7

45.0

44.4

43.8

42.8

41.9

40.9

40.3

39.3

38.4

37.1

22

51.4

51.1

50.4

49.5

48.8

47.9

46.9

46.0

45.0

44.4

43.1

42.2

40.9

U

PERFORMANCE DATA U69 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA ALPETY HKL Alpety-HKL 134

Cooling output - based on percentage of active ceiling surface area (BTUH/ft2) ∆tm (F)

20%

25%

30%

35%

40%

45%

50%

55%

60%

65%

70%

75%

80%

9

22.5

22.2

21.9

21.2

21.2

20.6

20.3

20.0

19.7

19.0

18.7

18.4

17.8

11

27.9

27.6

27.3

26.6

26.3

25.7

25.4

24.7

24.4

23.8

23.1

22.8

22.2

13

33.3

33.0

32.3

31.7

31.4

30.8

30.4

29.8

29.2

28.5

27.9

27.3

26.3

14

38.7

38.4

37.7

37.1

36.5

35.8

35.2

34.6

33.9

33.3

32.3

31.7

30.8

16

44.1

43.8

43.1

42.2

41.5

40.9

40.3

39.3

38.7

37.7

37.1

36.1

35.2

18

49.8

49.2

48.5

47.6

46.9

46.0

45.3

44.4

43.4

42.5

41.5

40.6

39.6

20

55.2

54.2

53.6

52.6

52.0

51.1

50.1

49.2

48.2

47.2

46.0

45.0

43.8

22

60.6

59.6

59.0

57.7

57.1

56.1

55.2

53.9

53.0

51.7

50.7

49.5

48.2

PERFORMANCE DATA

U

U70 Titus by Schako


Chilled Beam

Radiant Ceiling Panels (continued)

• SKS panels are architectural radiant ceiling products. ALPETY SKS

• Constructed from aluminum or steel sheet metal, aluminum extrusion, and copper tubing. • Optional perforated face pattern includes acoustical fleece to enhance room sound absorption. • Single water circuit per panel. • 15mm diameter pipe connections.

DESCRIPTION The Alpety radiant ceiling systems are water driven radiation systems whose advantages include silent cooling, low energy consumption, and create a high degree of thermal comfort through draft free cooling and even temperature distribution in the space. However, it must be taken into account that these systems must be supported by additional mechanical ventilation and means to address the latent cooling requirements of the space.

• Available mounting brackets and support rails for easy field installation.

In conjunction with the customer’s own metal or acoustic ceiling tiles, the Alpety ceiling elements can be integrated in the room to create the ceiling façade, models FKL and HKL, or in combination with suspended ceiling systems with SKS models. The individual ceiling elements are usually joined to one another using flexible hoses. Connections can also be made using hard copper piping and soft soldering.

ADVANTAGES

U

• Radiant heat transfer increases occupancy comfort. • Reduces energy consumption by utilizing heat transfer capacity of water. • Minimize airflow and noise in the space. • Quick and simple installation. • Several models integrate seamlessly in to any architecture.

ALPETY SKS

Radiant ceilings systems emit heating and cooling by both convection and radiation. During cooling, ambient air near the ceiling cools and falls to the occupied area, due to its higher density. In contrast, the ambient air heated by heat sources located in the room will rise. This gives rise to convection currents with very low flow velocities. Furthermore, the ceiling emits cooling and heating to the surrounding surfaces in the area by radiation. When radiation reaches one of these surfaces, the radiant energy is absorbed by that surface. The radiant heat transfer from the panels to surfaces and/or occupants in the room will occur regardless of the ambient air temperature. Radiant heat transfer results in high thermal comfort and leads to the ambient temperature feeling cooler than it actually is during cooling and warmer in heating. Depending on the percentage of the active ceiling surface to the overall surface of the room (including floor, walls, windows, furniture, etc.) the temperature perceived by the occupant will be 2.5 to 5 degrees cooler/warmer than it actually is. This effect has the advantage that the room requires less conditioning than a traditional system, introducing an additional opportunity for energy savings.

• Standard finish is RAL 9010 white powder coating.

www.titus-hvac.com | www.titus-energysolutions.com

ALPETY SKS

Since the sensible cooling no longer has to be introduced into the room along with ventilation air, the volume of air supplied can be reduced to the meet the fresh air requirements. By reducing the volume of air supplied the possibility of drafts and noise levels are greatly reduced. This leads to increased occupancy comfort. Addressing thermal loads using the Alpety products makes use of the increased heat transfer capacities of water, as compared to air, increasing overall system efficiency.

U71 Titus by Schako


Chilled Beam

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS

U

ALPETY SKS

Available Nominal Lengths* (ft) 2 4 6 8

Piping Configuration: 2-pipe connection (15 mm Dia.)

DIMENSIONS

Note: dimensions are in inches or mm.

U72 Titus by Schako


Chilled Beam

SUGGESTED SPECIFICATIONS

A. This section describes ceiling mounted radiant heating and cooling products. B. Model [SKS][FKL][HKL]

1.02 SUBMITTALS

PART 3 – EXECUTION

A. Submit as specified herein. B. Submit for review: • a. Product data for all items. Data shall be complete with the following information: 1. Operating weight and dimensions of assembled units. 2. Performance data, including water flow rate and water pressure drop. 3. Construction details, including materials of construction and fastening methods.

PART 2 – PRODUCTS

3.01 INSTALLATION - GENERAL

A. Follow manufacturer’s installation instructions and recommendations for all equipment. B. Install chilled beam units in ceiling in such a manner as to allow easy access to all controls. C. Using the hanging brackets on each unit supplied by the manufacturer, support chilled beam units to supporting structure using field supplied threaded rod or other secure hanging system. D. Provide water supply/return connection and install temperature control valve.

www.titus-hvac.com | www.titus-energysolutions.com

1.01 SUMMARY

C. SKS Panels are to be [non-perforated][perforated and supplied with acoustic fleece backing]. D. FKL & HKL constructed from multiple aluminum extrusions with 15 mm diameter copper tubing mechanically bonded to aluminum profiles. Individual extrusions attached to braces used for product mounting.

PART 1 – GENERAL

U

2.01 MANUFACTURERS

• A. Units shall be model [SKS][FKL][HKL] with lengths and widths as specified on drawings. • B. Considering the innovative technology utilized to engineer and manufacturer the applied equipment specified for this project the following substitution considerations shall apply to any manufacture requesting prior approval: a. Fifteen day prior to bid date any manufacturer who would like to be considered shall submit the following information via certified mail to the design professional. b. Submittal documentation for every product proposed including schedule and performance date for each with physical and thermal calculations. c. Any and all costs associated with using a substituted product shall be the responsibility of the Mechanical contractor. This includes but is not limited to redesign fees, additional piping and ductwork, and controls required.

2.02 GENERAL

SPECIFICATIONS

A. Units shall be designed for ceiling installation with factory supplied hanging brackets. Hanger rods or other approved hanging system to be field supplied and installed in the field by installing contractor. B. A supply and return water piping connection will be supplied on each panel/sail. D. Latent conditioning of the air supplied to the space shall be performed at the dedicated outdoor air unit and controlled by exhaust air humidity sensors.

2.03 CONSTRUCTION

A. Units are to be constructed of [galvanized sheet metal] [aluminum sheet metal][aluminum extrusion] painted RAL 9010 (white). B. SKS Panels are constructed with multiple aluminum extrusions glued to panel surface, and 15 mm diameter copper tubing mechanically bonded to aluminum extrusions.

U73 Titus by Schako


Notes

Chilled Beam


fan coils

V www.titus-hvac.com | www.titus-energysolutions.com


www.titus-hvac.com | www.titus-energysolutions.com

Table of Contents

V

Fan Coils

fan coil products Fan Coil Products............................................................................................................................................................................V4

overview Overview.........................................................................................................................................................................................V7

vertical stack series VSR Recessed Hi-Rise....................................................................................................................................................................V8 Dimensions.............................................................................................................................................................................V9 Performance Data.................................................................................................................................................................V10 VSRM Recessed Hi-Rise Remote Master.....................................................................................................................................V12 Dimensions...........................................................................................................................................................................V13 Performance Data.................................................................................................................................................................V14 VSRS Recessed Hi-Rise Remote Drone........................................................................................................................................V16 Dimensions...........................................................................................................................................................................V17 Performance Data.................................................................................................................................................................V18 VSM/VSS Recessed Master/Drone...............................................................................................................................................V20 Dimensions...........................................................................................................................................................................V21 Performance Data.................................................................................................................................................................V22 Suggested Specifications.............................................................................................................................................................V24

horizontal basic series HBC Concealed Ceiling.................................................................................................................................................................V27 Dimensions...........................................................................................................................................................................V28 Performance Data.................................................................................................................................................................V29 HBP Concealed Ceiling with Plenum............................................................................................................................................V31 Dimensions...........................................................................................................................................................................V32 Performance Data.................................................................................................................................................................V33 HBE Exposed Cabinet...................................................................................................................................................................V35 Dimensions...........................................................................................................................................................................V36 Performance Data.................................................................................................................................................................V37 HBR Recessed Cabinet.................................................................................................................................................................V39 Dimensions...........................................................................................................................................................................V40 Performance Data.................................................................................................................................................................V41 Suggested Specifications.............................................................................................................................................................V43

FAN COILS

vertical basic series

V2

VBC Concealed Floor....................................................................................................................................................................V45 Dimensions...........................................................................................................................................................................V46 Performance Data.................................................................................................................................................................V47 VBF Flat Top Cabinet.....................................................................................................................................................................V49 Dimensions...........................................................................................................................................................................V50 Performance Data.................................................................................................................................................................V51 VBA Angled Top Cabinet...............................................................................................................................................................V53 Dimensions...........................................................................................................................................................................V54 Performance Data.................................................................................................................................................................V55 VBL Low Profile Cabinet...............................................................................................................................................................V57 Dimensions...........................................................................................................................................................................V58 Performance Data.................................................................................................................................................................V59 VBLC Low Profile Concealed Floor...............................................................................................................................................V60 Dimensions...........................................................................................................................................................................V61 Performance Data.................................................................................................................................................................V62 Suggested Specifications.............................................................................................................................................................V63


Table of Contents (continued)

Fan Coils

HHC Concealed Ceiling.................................................................................................................................................................V66 Dimensions...........................................................................................................................................................................V67 Performance Data.................................................................................................................................................................V68 HHP Concealed Ceiling with Plenum...........................................................................................................................................V70 Dimensions...........................................................................................................................................................................V71 Performance Data.................................................................................................................................................................V72 HHE Exposed Cabinet...................................................................................................................................................................V74 Dimensions...........................................................................................................................................................................V75 Performance Data.................................................................................................................................................................V76 Suggested Specifications.............................................................................................................................................................V78

vertical high output series

VHC Concealed Closet..................................................................................................................................................................V80 Dimensions...........................................................................................................................................................................V81 Performance Data.................................................................................................................................................................V82 Suggested Specifications.............................................................................................................................................................V84

accessories

Accessories...................................................................................................................................................................................V86

www.titus-hvac.com | www.titus-energysolutions.com

horizontal high output series

V

FAN COILS V3


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

Fan Coil Products

V

VERTICAL STACK

pages: V8-V30

VSR

VSRM

VSRS

VERTICAL STACK SERIES

VERTICAL STACK SERIES

VERTICAL STACK SERIES

VERTICAL STACK SERIES

• Designed for free-blow or ducted, concealed installations. • Automatic 2-pipe changeover switch for heating and cooling applications. • 300 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure. • 0 to 0.5 high static option.

• Designed for free-blow or ducted, concealed installations. • Automatic 2-pipe changeover switch for heating and cooling applications. • 300 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure. • 0 to 0.5 high static option.

• Designed for free-blow or ducted, concealed installations. • Automatic 2-pipe changeover switch for heating and cooling applications. • 300 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure. • 0 to 0.5 high static option.

• Designed for free-blow or ducted, concealed installations. • Automatic 2-pipe changeover switch for heating and cooling applications. • 300 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure. • 0 to 0.5 high static option.

HORIZONTAL BASIC

pages: V31-V48

FAN COILS

HBC

V4

VSM/VSS

HBE

HBP

HBR

HORIZONTAL BASIC SERIES

HORIZONTAL BASIC SERIES

HORIZONTAL BASIC SERIES

HORIZONTAL BASIC SERIES

• Designed for concealed installations above ceilings with ducted air discharge. • High-efficiency 2-row coil suitable for a 2-pipe system. • 200 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure.

• Designed for concealed installations above ceilings with ducted air discharge. • High-efficiency 2-row coil suitable for a 2-pipe system. • 200 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure.

• Designed for concealed installations above ceilings with ducted air discharge. • High-efficiency 2-row coil suitable for a 2-pipe system. • 200 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure.

• Designed for concealed installations above ceilings with ducted air discharge. • High-efficiency 2-row coil suitable for a 2-pipe system. • 200 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure.


Fan Coils

Fan Coil Products (continued)

VBA

VBC

VBF

VBL

VERTICAL BASIC SERIES

VERTICAL BASIC SERIES

VERTICAL BASIC SERIES

VERTICAL BASIC SERIES

• Vertical blow-thru ducted fan coils designed for concealed installations. • 200 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure.

• Vertical blow-thru ducted fan coils designed for concealed installations. • 200 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure.

• Vertical blow-thru ducted fan coils designed for concealed installations. • 200 to 1200 cfm nominal airflows. • 0 to 0.3 inches external static pressure.

• Vertical blow-thru ducted fan coils designed for concealed installations. • 200 to 600 cfm nominal airflows. • 0 to 0.3 inches external static pressure.

www.titus-hvac.com | www.titus-energysolutions.com

VERTICAL BASIC

pages: V49-V69

V

VBLC VERTICAL BASIC SERIES

FAN COILS

• Vertical blow-thru ducted fan coils designed for concealed installations. • 200 to 600 cfm nominal airflows. • 0 to 0.3 inches external static pressure.

V5


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

Fan Coil Products (continued)

V

HORIZONTAL HIGH OUTPUT

pages: V70-V86

HHC

HHE

HORIZONTAL HIGH OUTPUT SERIES

HORIZONTAL HIGH OUTPUT SERIES

HORIZONTAL HIGH OUTPUT SERIES

• Designed for concealed installations above ceilings with ducted air discharge. • High-efficiency 3-row coil suitable for a 2-pipe system. • 600 to 2000 cfm nominal airflows. • 0 to 0.5 inches external static pressure.

• Designed for concealed installations above ceilings with ducted air discharge. • High-efficiency 3-row coil suitable for a 2-pipe system. • 600 to 2000 cfm nominal airflows. • 0 to 0.5 inches external static pressure.

• Designed for concealed installations above ceilings with ducted air discharge. • High-efficiency 3-row coil suitable for a 2-pipe system. • 600 to 2000 cfm nominal airflows. • 0 to 0.5 inches external static pressure.

VERTICAL HIGH OUTPUT

pages: V87-V93

VHC

FAN COILS

VERTICAL HIGH OUTPUT SERIES

V6

HHP

• • • •

Designed for ducted closet installations suitable for industrial and commercial applications. High-efficiency 3-row coil suitable for a 2-pipe system. 600 to 2000 cfm nominal airflows. 0 to 0.5 inches external static pressure.


Overview

For Hotels, hi-rise condominiums, and multi-unit residences the Vertical Stack Series minimizes first costs and simplifies installation. In applications when floor space is limited the ceiling mounted Horizontal Basic and High Output Series deliver the same high levels of personal comfort while allowing floor space to be maximized. Vertical Basic models provide a flexible solution in many applications. The slim profile and low unit height are great for under-sill application and retrofits. Every project is unique and tends to have at least a few specific needs outside of providing comfort to the space. Titus Fan Coil units are available in a multitude of configurations with a wide variety options and accessories to create a custom unit tailored to the needs of your project.

www.titus-hvac.com | www.titus-energysolutions.com

When independent climate control of individual spaces is necessary Titus Fan Coil units are often the ideal solution. With quite operation and independent temperature control Titus Fan Coil products place individual comfort in the hands of the occupant.

Fan Coils

V

FAN COILS V7


Factory assembled, vertical high-rise building VSR fan coils are designed for free-blow or ducted, concealed installations, suitable for hotel, motel and apartment building applications.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/ UL 1995 Standard. • All casing sheet metal components fabricated of 18GA G90 galvanized steel. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-inch thick disposable filter. • Cabinet liner in ½-inch dual-density fiberglass. • Multi-speed motor of the permanent split capacitor (PSC) type. • Direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside (Consult Titus for availability). • Translucent flexible condensate water P-trap. • Plenum discharge air flanges for duct and dry wall applications.

VSR

OPTIONAL FEATURES INCLUDE

V8

• 3-, 4- and 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1-row re-heat or preheat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Cabinet liner in 1-inch dualdensity fiberglass. • Cabinet liner in ½-inch foil face. • Cabinet liner in 1-inch foil face.

• Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • Standby electric heater auto changeover switch. • Fresh air opening. • Fresh air manual and auto dampers. • Fresh air freeze protection. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel (Consult Titus for availability). ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch. • Discharge air grilles: ◊ Aluminum double deflection. ◊ Deluxe aluminum double deflection grilles (Contact Titus for availability). ◊ Linear bar aluminum grilles. • Discharge air grille options: ◊ Dual discharge. ◊ Air damper controls for units with dual discharge grilles. ◊ Special discharge air grille colors (Contact Titus for color range availability and price). ◊ Discharge air grille location. • Return air/access panels painted white: ◊ Stamped galvanealed steel. ◊ Remote stamped galvanealed steel. ◊ ADA stamped galvanealed steel. ◊ ADA remote stamped panel. ◊ Invisislot blank front panel. ◊ Deluxe aluminum panel with a removable core.

VSR

www.titus-hvac.com | www.titus-energysolutions.com

V

Fan Coils

Vertical Stack Series VSR

• Linear bar aluminum panel with a removable core. • Special return air/access panel color (Contact Titus for color range availability and price). • Return air/access panel fasteners: ◊ Philips head fasteners. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners. • Fan section noise reduction kit. • 1-hour fire rating.

OPTIONAL RISER ASSEMBLY FEATURES INCLUDE

• Unit mounted riser. • Risers supplied loose. • Riser pipe type M, L and K. (Consult Titus for availability of type K risers). • Riser thermal Insulation in ½- or ¾-inch wall thickness. • Riser connections to unit options: ◊ Welded to the unit piping. ◊ Union connections using rigid copper pipe. ◊ Union connections with flexible braided stainless steel hoses. • Riser extensions. • Riser extension end connection reducers.

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

VSR RECESSED HI-RISE TOP VIEW

3 41

H

L

321 3 41

D OPTIONAL DUCTED TOP SUPPLY AIR

E

OPTIONAL DUCTED TOP SUPPLY AIR

E

F

2 41

1 3

6

1

D

D

11 2

E

OPTIONAL SIDE SUPPLY AIR

3 5 6

A

V

4

G 62 3 8

7

8

13

12

9

6

J

10

B FRONT VIEW

K C

6

141

141

SIDE VIEW Note:return For units with stamped return and basic double deflection supply grilles Note: For units with stamped and basic double-deflection supply grilles.

1. 2. 3. 4. 5.

Supply Air Grille (optional) Unit-Mounted Thermostat (optional) Motor/Blower Assemby Riser Expansion Loops Electrical Control Box

6. Valve Package (optional) 7. Filter 8. Coil 9. Condensate Tray 10. See through P-Trap Drain

Model A 88 88 88 88 88 88

B 17 17 20 20 24 24

C 17 17 20 20 24 24

D 8 10 10 12 12 16

E 15 15 18 18 22 22

Model VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

A 88 88 88 88 88 88

B 17 17 20 20 24 24

C 17 17 20 20 24 24

D 6 6 6 6 8 8

E 15 15 18 18 22 22

Option J 3 3 3 3 2 2

/4 1 /4 1 /4 1 /4 3 /8 3 /8 1

Dimensions - Dual Supply Option (inches) F G H J 1 56 5/8 8 1/2 3 1/4 1 56 5/8 8 1/2 3 1/4 5 1 56 /8 10 3 1/4 5 1 56 /8 10 3 1/4 1 59 5/8 12 2 3/8 1 59 5/8 12 2 3/8

All dimensions are in inches.

K 7 3/8 7 3/8 8 7/8 8 7/8 10 7/8 10 7/8

K 7 3/8 7 3/8 8 7/8 8 7/8 10 7/8 10 7/8

L 3 1/2 3 1/2 4 4 5 4

L 3 1/2 3 1/2 4 4 5 4

Filter 13x23x1 13x23x1 16x27x1 16x27x1 20x31x1 20x31x1

Approx. Weight (pounds) 230 240 270 280 310 320

Filter 13x23x1 13x23x1 16x27x1 16x27x1 20x31x1 20x31x1

Approx. Weight (pounds) 230 240 270 280 310 320

DIMENSIONS

VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

Dimensions - Single Supply (inches) F G H 1 56 5/8 8 1/2 1 56 5/8 8 1/2 1 56 5/8 10 1 56 5/8 10 1 59 5/8 12 1 59 5/8 12

11. Riser Assembly 12. Fresh Air Damper Opening (optional) 13. Stamped Return Air/Access Panel (optional)

V9


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

V

VSR RECESSED HI-RISE

Model VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

Model VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

Model VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

PERFORMANCE DATA

Model

V10

VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 9.5 6.8 1.9 4.35 24.7 1.7 2.71 10.8 7.9 2.2 5.57 29.0 2.0 3.66 14.9 11.1 3.0 2.39 41.7 2.8 1.86 18.3 14.1 3.7 3.56 53.1 3.6 2.95 24.4 18.6 4.9 3.31 70.1 4.8 2.86 26.2 20.2 5.2 3.78 76.2 5.2 3.35 2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 12.4 8.3 2.5 10.72 31.1 2.1 6.26 12.8 9.1 2.6 1.97 35.8 2.4 1.52 20.0 13.8 4.0 5.83 53.0 3.6 4.00 23.4 17.2 4.7 3.28 67.5 4.6 2.83 33.5 23.5 6.7 7.82 90.0 6.1 5.87 34.3 25.0 6.9 4.95 97.2 6.6 4.32 2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 12.9 8.6 2.6 2.54 32.7 2.2 1.61 15.0 10.1 3.0 3.39 39.1 2.7 2.26 21.8 14.7 4.4 3.46 56.8 3.9 2.45 28.1 19.4 5.6 5.61 75.2 5.1 4.17 37.6 25.5 7.5 6.85 98.1 6.7 5.11 40.9 28.0 8.2 8.04 108.0 7.4 6.13

Model VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

Model VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

Model VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

4-PIPE SYSTEM 2 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 9.1 6.6 1.8 4.01 15.8 10.5 7.5 2.1 5.21 18.1 14.2 10.5 2.8 2.20 26.3 17.6 13.5 3.5 3.30 32.8 23.5 17.7 4.7 3.06 43.7 25.1 19.2 5.0 3.49 47.1

Heating Flow PD gpm ft wg 1.1 4.24 1.2 5.46 1.8 2.08 2.2 3.15 3.0 7.13 3.2 8.19

4-PIPE SYSTEM 3 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 11.9 7.9 2.4 9.79 15.0 12.2 8.7 2.4 1.81 17.2 19.0 13.1 3.8 5.29 25.1 22.5 16.4 4.5 3.04 31.4 31.9 22.3 6.4 7.11 41.8 32.8 23.7 6.6 4.53 45.0

Heating Flow PD gpm ft wg 1.0 3.92 1.2 5.04 1.7 2.02 2.1 3.04 2.9 6.87 3.1 7.85

4-PIPE SYSTEM 4 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 12.2 8.0 2.4 2.27 14.3 14.2 9.5 2.8 3.05 16.4 20.6 13.8 4.1 3.11 23.9 26.6 18.3 5.3 5.07 29.9 35.5 24.0 7.1 6.12 39.8 38.7 26.4 7.7 7.25 42.9

Heating Flow PD gpm ft wg 1.0 3.57 1.1 4.62 1.6 1.90 2.0 2.94 2.7 6.48 2.9 7.49

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 13.7 8.8 2.7 3.44 33.0 2.3 1.96 16.2 10.5 3.2 4.69 39.8 2.7 2.79 23.4 15.2 4.7 4.63 57.6 3.9 2.93 29.5 19.9 5.9 4.16 77.0 5.3 3.11 40.5 26.5 8.1 9.00 100.4 6.9 6.07 44.5 29.3 8.9 10.77 111.2 7.6 7.37

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10F water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


Fan Coils

PERFORMANCE DATA

VSR03 VSR04 VSR06 VSR08 VSR10 VSR12

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

Nominal Air Volumes cfm (1) Model High Med Low VSR03 362 303 254 VSR04 445 355 293 VSR06 643 488 399 VSR08 916 731 576 VSR10 1153 945 651 VSR12 1300 1202 977

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with zero static pressure. 2. Air volumes are based at high fan speed.

www.titus-hvac.com | www.titus-energysolutions.com

Model

Motor Total HP AMPS 1/10 1.50 1/10 1.50 1/10 1.90 1/4 3.50 1/4 3.90 1/3 4.00

V

PERFORMANCE DATA V11


Fan Coils

V

VSRM Factory assembled, vertical high-rise building VSRM master fan coils stand alone with riser water connections ready for a remote drone unit VSRS, are designed for free-blow or ducted, concealed installations, suitable for hotel, motel and apartment building applications.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/ UL 1995 Standard. • All casing sheet metal components fabricated of 18GA G90 galvanized steel. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-inch thick disposable filter. • Cabinet liner in ½-inch dual-density fiberglass. • Multi-speed motor of the permanent split capacitor (PSC) type. • Direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside. (Consult Titus for availability). • Translucent flexible condensate water P-trap. • Plenum discharge air flanges for duct and dry wall applications.

VSRM

OPTIONAL FEATURES INCLUDE

V12

• 3-, 4- and 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1-row re-heat or preheat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Cabinet liner in 1-inch dualdensity fiberglass. • Cabinet liner in ½-inch foil face.

• Cabinet liner in 1-inch foil face. • Motor Voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnects switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • Standby electric heater auto changeover switch. • Fresh air opening. • Fresh air manual and auto dampers. • Fresh air freeze protection. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan mastic coating applicable overflow safety switch. • Discharge air grilles: ◊ Aluminum double deflection. ◊ Deluxe aluminum double deflection grilles (Contact Titus for availability). ◊ Linear bar aluminum grilles. • Discharge air grille options: ◊ Dual discharge. ◊ Air damper controls for units with dual discharge grilles. ◊ Special discharge air grille colors (Contact Titus for color range availability and price). ◊ Discharge air grille location. • Return air/access panels painted white: ◊ Stamped galvanealed steel. ◊ Remote stamped galvanealed steel. ◊ ADA stamped galvanealed steel. ◊ ADA remote stamped panel. ◊ Invisislot blank front panel.

VSRM

www.titus-hvac.com | www.titus-energysolutions.com

Vertical Stack Series (continued)

◊ Deluxe aluminum panel with a removable core. • Linear bar aluminum panel with a removable core. • Special return air/access panel color (Contact Titus for color range availability and price). • Return air/access panel fasteners: ◊ Philips head fasteners. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners. • Fan section noise reduction kit. • 1-hour fire rating.

OPTIONAL RISER ASSEMBLY FEATURES INCLUDE

• Unit mounted riser. • Risers supplied loose. • Riser pipe type M, L and K. (Consult Titus for availability of type K risers). • Riser thermal Insulation in ½- or ¾-inch wall thickness. • Riser connections to master unit options: ◊ Welded to the unit piping. ◊ Union connections using rigid copper pipe. ◊ Union connections with flexible braided stainless steel hoses. ◊ Riser connections to salve unit (supplied separate) options: ◊ Union connections using rigid copper pipe. ◊ Union connections with flexible braided stainless steel hoses. ◊ Riser extensions. ◊ Riser extension end connection reducers.

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

VSRM RECESSED HI-RISE REMOTE MASTER TOP VIEW 3 41

H

321

L

3 41

D OPTIONAL DUCTED TOP SUPPLY AIR

E F

OPTIONAL DUCTED TOP SUPPLY AIR

E

2 41

1 3

6

1

D

D

11 2

E

OPTIONAL SIDE SUPPLY AIR

3 5

14

6

A

4

G 62 3 8

7

V

8

14

13 41 1/8

12

9

6

J

10

B FRONT VIEW

4

6

K

141

C

141

SIDE VIEW

Note: For units with stamped return and double-deflection supply grilles. Note: For units with stamped returnbasic and basic double deflection supply grilles 1. Supply Air Grille (optional) 2. Unit-Mounted Thermostat (optional) 3. Motor/Blower(s) Assemby 4. Riser Expansion Loops (optional) 5. Electrical Control Box

6. Valve Package (optional) 7. Filter 8. Coil 9. Condensate Tray 10. See through P-Trap Drain 11. Riser Assembly (optional)

Model A 88 88 88 88 88 88

B 17 17 20 20 24 24

C 17 17 20 20 24 24

D 8 10 10 12 12 16

E 15 15 18 18 22 22

Model VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

A 88 88 88 88 88 88

B 17 17 20 20 24 24

C 17 17 20 20 24 24

D 6 6 6 6 8 8

E 15 15 18 18 22 22

Option J 3 3 3 3 2 2

/4 1 /4 1 /4 1 /4 3 /8 3 /8 1

Dimensions - Dual Supply Option (inches) F G H J 1 56 5/8 8 1/2 3 1/4 1 56 5/8 8 1/2 3 1/4 5 1 56 /8 10 3 1/4 1 56 5/8 10 3 1/4 1 59 5/8 12 2 3/8 5 1 59 /8 12 2 3/8

All dimensions are in inches.

K 7 3/8 7 3/8 8 7/8 8 7/8 10 7/8 10 7/8

K 7 3/8 7 3/8 8 7/8 8 7/8 10 7/8 10 7/8

L 3 1/2 3 1/2 4 4 5 4

L 3 1/2 3 1/2 4 4 5 4

Filter 13x23x1 13x23x1 16x27x1 16x27x1 20x31x1 20x31x1

Approx. Weight (pounds) 230 240 270 280 310 320

Filter 13x23x1 13x23x1 16x27x1 16x27x1 20x31x1 20x31x1

Approx. Weight (pounds) 230 240 270 280 310 320

DIMENSIONS

VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

Dimensions - Single Supply (inches) F G H 1 56 5/8 8 1/2 1 56 5/8 8 1/2 1 56 5/8 10 1 56 5/8 10 1 59 5/8 12 1 59 5/8 12

12. Fresh Air Damper Opening (optional) 13. 1-hour Firewall (optional) 14. Return Air/Access Panel (optional)

V13


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

V

VSRM RECESSED HI-RISE REMOTE MASTER

Model VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

Model VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

Model VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

PERFORMANCE DATA

Model

V14

VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 9.5 6.8 1.9 4.35 24.7 1.7 2.71 10.8 7.9 2.2 5.57 29.0 2.0 3.66 14.9 11.1 3.0 2.39 41.7 2.8 1.86 18.3 14.1 3.7 3.56 53.1 3.6 2.95 24.4 18.6 4.9 3.31 70.1 4.8 2.86 26.2 20.2 5.2 3.78 76.2 5.2 3.35

Total MBH 12.4 12.8 20.0 23.4 33.5 34.3

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.3 2.5 10.72 31.1 2.1 6.26 9.1 2.6 1.97 35.8 2.4 1.52 13.8 4.0 5.83 53.0 3.6 4.00 17.2 4.7 3.28 67.5 4.6 2.83 23.5 6.7 7.82 90.0 6.1 5.87 25.0 6.9 4.95 97.2 6.6 4.32

Total MBH 12.9 15.0 21.8 28.1 37.6 40.9

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.6 2.6 2.54 32.7 2.2 1.61 10.1 3.0 3.39 39.1 2.7 2.26 14.7 4.4 3.46 56.8 3.9 2.45 19.4 5.6 5.61 75.2 5.1 4.17 25.5 7.5 6.85 98.1 6.7 5.11 28.0 8.2 8.04 108.0 7.4 6.13

Total MBH 13.7 16.2 23.4 29.5 40.5 44.5

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.8 2.7 3.44 33.0 2.3 1.96 10.5 3.2 4.69 39.8 2.7 2.79 15.2 4.7 4.63 57.6 3.9 2.93 19.9 5.9 4.16 77.0 5.3 3.11 26.5 8.1 9.00 100.4 6.9 6.07 29.3 8.9 10.77 111.2 7.6 7.37

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

Model VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

Model VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

Total MBH 9.1 10.5 14.2 17.6 23.5 25.1

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 6.6 1.8 4.01 15.8 7.5 2.1 5.21 18.1 10.5 2.8 2.20 26.3 13.5 3.5 3.30 32.8 17.7 4.7 3.06 43.7 19.2 5.0 3.49 47.1

Heating Flow PD gpm ft wg 1.1 4.24 1.2 5.46 1.8 2.08 2.2 3.15 3.0 7.13 3.2 8.19

Total MBH 11.9 12.2 19.0 22.5 31.9 32.8

4-PIPE SYSTEM 3 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 7.9 2.4 9.79 15.0 8.7 2.4 1.81 17.2 13.1 3.8 5.29 25.1 16.4 4.5 3.04 31.4 22.3 6.4 7.11 41.8 23.7 6.6 4.53 45.0

Heating Flow PD gpm ft wg 1.0 3.92 1.2 5.04 1.7 2.02 2.1 3.04 2.9 6.87 3.1 7.85

Total MBH 12.2 14.2 20.6 26.6 35.5 38.7

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 8.0 2.4 2.27 14.3 9.5 2.8 3.05 16.4 13.8 4.1 3.11 23.9 18.3 5.3 5.07 29.9 24.0 7.1 6.12 39.8 26.4 7.7 7.25 42.9

Heating Flow PD gpm ft wg 1.0 3.57 1.1 4.62 1.6 1.90 2.0 2.94 2.7 6.48 2.9 7.49

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


Fan Coils

PERFORMANCE DATA

VSRM03 VSRM04 VSRM06 VSRM08 VSRM10 VSRM12

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

Nominal Air Volumes cfm (1) Model High Med Low VSRM03 362 303 254 VSRM04 445 355 293 VSRM06 643 488 399 VSRM08 916 731 576 VSRM10 1153 945 651 VSRM12 1300 1202 977

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with zero static pressure. 2. Air volumes are based at high fan speed.

www.titus-hvac.com | www.titus-energysolutions.com

Model

Motor Total HP AMPS 1/10 1.50 1/10 1.50 1/10 1.90 1/4 3.50 1/4 3.90 1/3 4.00

V

PERFORMANCE DATA V15


Fan Coils

V

VSRS Factory assembled, vertical high-rise building VSRS drone fan coils stand alone ready, to connect to a remote master unit VSRM, are designed for free-blow or ducted, concealed installations suitable for hotel, motel and apartment building applications.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/ UL 1995 Standard. • All casing sheet metal components fabricated of 18GA G90 galvanized steel. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-inch thick disposable filter. • Cabinet liner in ½-inch dual-density fiberglass. • Multi-speed motor of the permanent split capacitor (PSC) type. • Direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside (Consult Titus for availability). • Translucent flexible condensate water P-trap. • Plenum discharge air flanges for duct and dry wall applications.

VSRS

OPTIONAL FEATURES INCLUDE

V16

• 3-, 4- and 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1-row re-heat or preheat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Cabinet liner in 1-inch dualdensity fiberglass. • Cabinet liner in ½-inch foil face.

• Cabinet liner in 1-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1ph/60hz power supplies. • Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnects switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • Standby electric heater auto changeover switch. • Fresh air opening. • Fresh air manual and auto dampers. • Fresh air freeze protection. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel (Consult Titus for availability). ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch. • Discharge air grilles: ◊ Aluminum double deflection. ◊ Deluxe aluminum double deflection grilles (Consult Titus for availability). ◊ Linear bar aluminum grilles. • Discharge air grille options: ◊ Dual discharge. ◊ Air damper controls for units with dual discharge grilles. ◊ Special discharge air grille colors (Contact Titus for color range availability and price). ◊ Discharge air grille location. • Return air/access panels painted white: ◊ Stamped galvanealed steel. ◊ Remote stamped galvanealed steel. ◊ ADA stamped galvanealed steel. ◊ ADA remote stamped panel. ◊ Invisislot blank front panel.

VSRS

www.titus-hvac.com | www.titus-energysolutions.com

Vertical Stack Series (continued)

◊ Deluxe aluminum panel with a removable core. • Linear bar aluminum panel with a removable core. • Special return air/access panel color (Contact Titus for color range availability and price). • Return air/access panel fasteners: ◊ Philips head fasteners. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners. • Fan section noise reduction kit. • 1-hour fire rating. • Connections to master unit risers options (supplied separate): • Union connections using rigid copper pipe. • Union connections with flexible braided stainless steel hoses.

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

VSRS RECESSED HI-RISE REMOTE DRONE TOP VIEW

L D OPTIONAL DUCTED TOP SUPPLY AIR

E

OPTIONAL DUCTED TOP SUPPLY AIR

E

F

2 41

1

1

D

D

2

E

OPTIONAL SIDE SUPPLY AIR

12 3

5 6

A

4

G

7

62 3 8

9

11

6 B 141

Note: For units with stamped return and basic double-deflection supply grilles. Note: For units with stamped return and basic double deflection supply grilles

1. Supply Air Grille (optional) 2. Unit-Mounted Thermostat (optional) 3. Blower / Motor Assembly 4. Riser Expansion Loops (optional) 5. Electrical Control Box

6. Valve Package (optional) 7. Filter 8. Coil Assembly 9. Condensate pan 10. See through P-Trap Drain

Model A 88 88 88 88 88 88

B 17 17 20 20 24 24

C 17 17 20 20 24 24

D 8 10 10 12 12 16

E 15 15 18 18 22 22

Model VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

A 88 88 88 88 88 88

B 17 17 20 20 24 24

C 17 17 20 20 24 24

D 6 6 6 6 8 8

E 15 15 18 18 22 22

Dimensions - Single Supply (inches) F G H 1 56 5/8 8 1/2 1 56 5/8 8 1/2 1 56 5/8 10 1 56 5/8 10 1 59 5/8 12 1 59 5/8 12

K C

141

SIDE VIEW

11. Fresh Air Damper Opening (optional) 12. 1-hour Firewall (optional) 13. Return Air/Access Panel (optional)

Option J 3 3 3 3 2 2

/4 1 /4 1 /4 1 /4 3 /8 3 /8 1

Dimensions - Dual Supply Option (inches) F G H J 1 56 5/8 8 1/2 3 1/4 1 56 5/8 8 1/2 3 1/4 5 1 56 /8 10 3 1/4 5 1 56 /8 10 3 1/4 1 59 5/8 12 2 3/8 1 59 5/8 12 2 3/8

All dimensions are in inches.

K 7 3/8 7 3/8 8 7/8 8 7/8 10 7/8 10 7/8

K 7 3/8 7 3/8 8 7/8 8 7/8 10 7/8 10 7/8

L 3 1/2 3 1/2 4 4 5 4

L 3 1/2 3 1/2 4 4 5 4

Filter 13x23x1 13x23x1 16x27x1 16x27x1 20x31x1 20x31x1

Approx. Weight (pounds) 230 240 270 280 310 320

Filter 13x23x1 13x23x1 16x27x1 16x27x1 20x31x1 20x31x1

Approx. Weight (pounds) 230 240 270 280 310 320

DIMENSIONS

VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

J

10

FRONT VIEW

V

8

13

V17


Fan Coils • Vertical Stack • VSRS • Performance Data

Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

V

VSRS RECESSED HI-RISE REMOTE DRONE

Model VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

Model VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

Model VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

PERFORMANCE DATA

Model

V18

VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 9.5 6.8 1.9 4.35 24.7 1.7 2.71 10.8 7.9 2.2 5.57 29.0 2.0 3.66 14.9 11.1 3.0 2.39 41.7 2.8 1.86 18.3 14.1 3.7 3.56 53.1 3.6 2.95 24.4 18.6 4.9 3.31 70.1 4.8 2.86 26.2 20.2 5.2 3.78 76.2 5.2 3.35

Total MBH 12.4 12.8 20.0 23.4 33.5 34.3

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.3 2.5 10.72 31.1 2.1 6.26 9.1 2.6 1.97 35.8 2.4 1.52 13.8 4.0 5.83 53.0 3.6 4.00 17.2 4.7 3.28 67.5 4.6 2.83 23.5 6.7 7.82 90.0 6.1 5.87 25.0 6.9 4.95 97.2 6.6 4.32

Total MBH 12.9 15.0 21.8 28.1 37.6 40.9

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.6 2.6 2.54 32.7 2.2 1.61 10.1 3.0 3.39 39.1 2.7 2.26 14.7 4.4 3.46 56.8 3.9 2.45 19.4 5.6 5.61 75.2 5.1 4.17 25.5 7.5 6.85 98.1 6.7 5.11 28.0 8.2 8.04 108.0 7.4 6.13

Total MBH 13.7 16.2 23.4 29.5 40.5 44.5

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.8 2.7 3.44 33.0 2.3 1.96 10.5 3.2 4.69 39.8 2.7 2.79 15.2 4.7 4.63 57.6 3.9 2.93 19.9 5.9 4.16 77.0 5.3 3.11 26.5 8.1 9.00 100.4 6.9 6.07 29.3 8.9 10.77 111.2 7.6 7.37

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

Model VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

Model VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

Total MBH 9.1 10.5 14.2 17.6 23.5 25.1

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 6.6 1.8 4.01 15.8 7.5 2.1 5.21 18.1 10.5 2.8 2.20 26.3 13.5 3.5 3.30 32.8 17.7 4.7 3.06 43.7 19.2 5.0 3.49 47.1

Heating Flow PD gpm ft wg 1.1 4.24 1.2 5.46 1.8 2.08 2.2 3.15 3.0 7.13 3.2 8.19

Total MBH 11.9 12.2 19.0 22.5 31.9 32.8

4-PIPE SYSTEM 3 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 7.9 2.4 9.79 15.0 8.7 2.4 1.81 17.2 13.1 3.8 5.29 25.1 16.4 4.5 3.04 31.4 22.3 6.4 7.11 41.8 23.7 6.6 4.53 45.0

Heating Flow PD gpm ft wg 1.0 3.92 1.2 5.04 1.7 2.02 2.1 3.04 2.9 6.87 3.1 7.85

Total MBH 12.2 14.2 20.6 26.6 35.5 38.7

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 8.0 2.4 2.27 14.3 9.5 2.8 3.05 16.4 13.8 4.1 3.11 23.9 18.3 5.3 5.07 29.9 24.0 7.1 6.12 39.8 26.4 7.7 7.25 42.9

Heating Flow PD gpm ft wg 1.0 3.57 1.1 4.62 1.6 1.90 2.0 2.94 2.7 6.48 2.9 7.49

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


Fan Coils

PERFORMANCE DATA

VSRS03 VSRS04 VSRS06 VSRS08 VSRS10 VSRS12

Motor Total HP AMPS 1/10 1.50 1/10 1.50 1/10 1.90 1/4 3.50 1/4 3.90 1/3 4.00

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

Nominal Air Volumes cfm (1) Model High Med Low VSRS03 362 303 254 VSRS04 445 355 293 VSRS06 643 488 399 VSRS08 916 731 576 VSRS10 1153 945 651 VSRS12 1300 1202 977

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with zero static pressure. 2. Air volumes are based at high fan speed.

www.titus-hvac.com | www.titus-energysolutions.com

Model

V

PERFORMANCE DATA V19


Fan Coils

V

VSM/VSS Factory assembled, vertical high-rise building VSM/VSS master/drone twin pack fan coils are designed for free-blow or ducted, concealed installations, sharing a single set of risers suitable for hotel, motel and apartment building applications.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/ UL 1995 Standard. • All casing sheet metal components fabricated of 18GA G90 galvanized steel. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-Inch thick disposable filter. • Cabinet liner in ½-inch dual-density fiberglass. • Multi-speed motor of the permanent split capacitor (PSC) type. • Direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside. (Consult Titus for availability). • Translucent flexible condensate water P-trap. • Plenum discharge air flanges for duct and dry wall applications.

VSM, VSS

OPTIONAL FEATURES INCLUDE

V20

• 3-, 4- And 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1-row re-heat or preheat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • Filter option include: ◊ 1-Inch high-efficiency pleated filters. ◊ 1-Inch washable filters.

• Cabinet liner in 1-inch dualdensity fiberglass. • Cabinet liner in ½-inch foil face. • Cabinet liner in 1-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1ph/60hz power supplies. • Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • Standby electric heater auto changeover switch. • Fresh air opening. • Fresh air manual and auto dampers. • Fresh air freeze protection. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel (Consult Titus for availability). ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch. • Discharge air grilles: ◊ Aluminum double deflection. ◊ Deluxe aluminum double deflection grilles (Contact Titus for availability). ◊ Linear bar aluminum grilles. • Discharge air grille options: ◊ Dual discharge. ◊ Air damper controls for units with dual discharge grilles. ◊ Special discharge air grille colors (Contact Titus for color range availability and price). ◊ Discharge air grille location. • Return air/access panels painted white: ◊ Stamped galvanealed steel.

VSM, VSS

www.titus-hvac.com | www.titus-energysolutions.com

Vertical Stack Series (continued)

◊ Remote stamped galvanealed steel. ◊ ADA stamped galvanealed steel. ◊ ADA remote stamped panel. ◊ Invisislot blank front panel. ◊ Deluxe aluminum panel with a removable core. • Linear bar aluminum panel with a removable core. • Special return air/access panel color (Contact Titus for color range availability and price). • Return air/access panel fasteners: ◊ Philips head fasteners. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners. • Fan section noise reduction kit. • 1-hour fire rating. • Unit mounted risers. • Welded connections to risers • Riser pipe type M, L and K. (Consult Titus for availability of type K risers). • Riser thermal insulation in ½ or ¾-inch wall thickness. • Riser extensions. • Riser extension end connection reducers.

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

VSM/VSS RECESSED MASTER/DRONE TOP VIEW

3 41

321 L

3 41

D

H F

OPTIONAL DUCTED TOP SUPPLY AIR OPTIONAL DUCTED TOP SUPPLY AIR

E E

2 41

11

1

OPTIONAL DUCTED SIDE SUPPLY AIR

1

D

D

E

2

3 5 6

13

A

V

4 8

62 3 8

7

G

9

6 K

B FRONT VIEW

141

C

12

141

SIDE VIEW

10

J

6 1/2

5

Note: For units with stamped return and basic double deflection supply grilles Note: For units with stamped return and basic double-deflection supply grilles.

1. Supply Air Grille (optional) 2. Unit Mounted Thermostat (optional) 3. Motor/Blower(s) Assembly 4. Expansion Loop 5. Electrical Control Box

6. Valve Package (optional) 7. Filter 8. Coil 9. Condensation Tray 10. See through P-Trap Drain 11. Riser (optional)

Model A 88 88 88 88 88 88

B 17 17 20 20 24 24

C 17 17 20 20 24 24

D 8 10 10 12 12 16

E 15 15 18 18 22 22

Model VSS/VSM03 VSS/VSM04 VSS/VSM06 VSS/VSM08 VSS/VSM10 VSS/VSM12

A 88 88 88 88 88 88

B 17 17 20 20 24 24

C 17 17 20 20 24 24

D 6 6 6 6 8 8

E 15 15 18 18 22 22

Option J 3 3 3 3 2 2

/4 1 /4 1 /4 1 /4 3 /8 3 /8 1

Dimensions - Dual Supply Option (inches) F G H J 1 56 5/8 8 1/2 3 1/4 1 56 5/8 8 1/2 3 1/4 5 1 56 /8 10 3 1/4 1 56 5/8 10 3 1/4 1 59 5/8 12 2 3/8 5 1 59 /8 12 2 3/8

All dimensions are in inches.

K 7 3/8 7 3/8 8 7/8 8 7/8 10 7/8 10 7/8

K 7 3/8 7 3/8 8 7/8 8 7/8 10 7/8 10 7/8

L 3 1/2 3 1/2 4 4 5 4

L 3 1/2 3 1/2 4 4 5 4

Filter 13x23x1 13x23x1 16x27x1 16x27x1 20x31x1 20x31x1

Approx. Weight (pounds) 230 240 270 280 310 320

Filter 13x23x1 13x23x1 16x27x1 16x27x1 20x31x1 20x31x1

Approx. Weight (pounds) 230 240 270 280 310 320

DIMENSIONS

VSS/VSM03 VSS/VSM04 VSS/VSM06 VSS/VSM08 VSS/VSM10 VSS/VSM12

Dimensions - Single Supply (inches) F G H 1 56 5/8 8 1/2 1 56 5/8 8 1/2 1 56 5/8 10 1 56 5/8 10 1 59 5/8 12 1 59 5/8 12

12. Fresh Air Damper Opening (optional) 13. Return Air/Access Panel (optional)

V21


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

V

VSM/VSS RECESSED MASTER/DRONE

Model VSM/S03 VSM/S04 VSM/S06 VSM/S08 VSM/S10 VSM/S12

Model VSM/S03 VSM/S04 VSM/S06 VSM/S08 VSM/S10 VSM/S12

Model VSM/S03 VSM/S04 VSM/S06 VSM/S08 VSM/S10 VSM/S12

PERFORMANCE DATA

Model

V22

VSM/S03 VSM/S04 VSM/S06 VSM/S08 VSM/S10 VSM/S12

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 9.5 6.8 1.9 4.35 24.7 10.8 7.9 2.2 5.57 29.0 14.9 11.1 3.0 2.39 41.7 18.3 14.1 3.7 3.56 53.1 24.4 18.6 4.9 3.31 70.1 26.2 20.2 5.2 3.78 76.2

Heating (1) Flow PD gpm ft wg 1.7 2.71 2.0 3.66 2.8 1.86 3.6 2.95 4.8 2.86 5.2 3.35

Total MBH 12.4 12.8 20.0 23.4 33.5 34.3

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.3 2.5 10.72 31.1 2.1 6.26 9.1 2.6 1.97 35.8 2.4 1.52 13.8 4.0 5.83 53.0 3.6 4.00 17.2 4.7 3.28 67.5 4.6 2.83 23.5 6.7 7.82 90.0 6.1 5.87 25.0 6.9 4.95 97.2 6.6 4.32

Total MBH 12.9 15.0 21.8 28.1 37.6 40.9

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.6 2.6 2.54 32.7 2.2 1.61 10.1 3.0 3.39 39.1 2.7 2.26 14.7 4.4 3.46 56.8 3.9 2.45 19.4 5.6 5.61 75.2 5.1 4.17 25.5 7.5 6.85 98.1 6.7 5.11 28.0 8.2 8.04 108.0 7.4 6.13

Total MBH 13.7 16.2 23.4 29.5 40.5 44.5

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.8 2.7 3.44 33.0 2.3 1.96 10.5 3.2 4.69 39.8 2.7 2.79 15.2 4.7 4.63 57.6 3.9 2.93 19.9 5.9 4.16 77.0 5.3 3.11 26.5 8.1 9.00 100.4 6.9 6.07 29.3 8.9 10.77 111.2 7.6 7.37

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model VSM/S03 VSM/S04 VSM/S06 VSM/S08 VSM/S10 VSM/S12

Model VSM/S03 VSM/S04 VSM/S06 VSM/S08 VSM/S10 VSM/S12

Model VSM/S03 VSM/S04 VSM/S06 VSM/S08 VSM/S10 VSM/S12

Total MBH 9.1 10.5 14.2 17.6 23.5 25.1

4-PIPE SYSTEM 2 Rows Cooling 1 Row Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 6.6 1.8 4.01 15.8 1.1 4.24 7.5 2.1 5.21 18.1 1.2 5.46 10.5 2.8 2.20 26.3 1.8 2.08 13.5 3.5 3.30 32.8 2.2 3.15 17.7 4.7 3.06 43.7 3.0 7.13 19.2 5.0 3.49 47.1 3.2 8.19

Total MBH 11.9 12.2 19.0 22.5 31.9 32.8

4-PIPE SYSTEM 3 Rows Cooling 1 Row Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 7.9 2.4 9.79 15.0 1.0 3.92 8.7 2.4 1.81 17.2 1.2 5.04 13.1 3.8 5.29 25.1 1.7 2.02 16.4 4.5 3.04 31.4 2.1 3.04 22.3 6.4 7.11 41.8 2.9 6.87 23.7 6.6 4.53 45.0 3.1 7.85

Total MBH 12.2 14.2 20.6 26.6 35.5 38.7

4-PIPE SYSTEM 4 Rows Cooling 1 Row Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 8.0 2.4 2.27 14.3 1.0 3.57 9.5 2.8 3.05 16.4 1.1 4.62 13.8 4.1 3.11 23.9 1.6 1.90 18.3 5.3 5.07 29.9 2.0 2.94 24.0 7.1 6.12 39.8 2.7 6.48 26.4 7.7 7.25 42.9 2.9 7.49

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10F water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


Fan Coils

PERFORMANCE DATA

VSM/S03 VSM/S04 VSM/S06 VSM/S08 VSM/S10 VSM/S12

Motor Total HP AMPS 1/10 1.50 1/10 1.50 1/10 1.90 1/4 3.50 1/4 3.90 1/3 4.00

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

Nominal Air Volumes cfm (1) Model High Med Low VSM/S03 362 303 254 VSM/S04 445 355 293 VSM/S06 643 488 399 VSM/S08 916 731 576 VSM/S10 1153 945 651 VSM/S12 1300 1202 977

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with zero static pressure. 2. Air volumes are based at high fan speed.

www.titus-hvac.com | www.titus-energysolutions.com

Model

V

PERFORMANCE DATA V23


www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

SPECIFICATIONS

V

V24

Fan Coils

FAN COILS Vertical Stack Units Standard Configurations 1. Furnish and install Titus Models VSR, VSRM, VSRS and VSM/VSS vertical stack high rise fan coils of sizes and capacities shown on the plans to meet prevailing cooling and heating requirements. 2. Fan coils shall be performance certified to AHRI Standard 440. Units shall be wired in compliance with ANSI/UL 1995 Standard and listed with ETL. 3. Fan coils shall be sound tested in accordance with AHRI Standard 260 for ducted units and AHRI Standard 350 for non-ducted units. Manufacturer shall provide these dB ratings on request for each model specified. 4. Casing components shall be fabricated of 18-gauge G90 galvanized steel. 5. High-efficiency, 2-row coil shall be suitable for a 2-pipe system. Coils shall be manufactured with aluminum fins mechanically bonded to seamless copper tubes. The copper tubes shall be ⅜-inch OD with a wall thickness of 0.014-inch which comply with ASTM B-75. The fins shall be waved with ripple edges for superior efficiency with a thickness of 0.0045-inch and spaced at 10 fpi. Coils rated to 300 psi operational pressure. All coils shall be shipped with a safety air pressure of 30 - 50 psi to guarantee a leak free arrival at the final destination. 6. Coils shall be installed with manual Schrader type air vents with a sealing cap and be located at the highest point of the coil. The cap shall have a dual purpose, to seal any potential water leakage in the eventuality of Schrader valve failure and as a service tool for the extraction/insertion of the internal Schrader valve. 7. Unit pipe entry/riser location shall be in accordance with the project schedule. 8. Standard filters shall be 1-inch thick of the disposable type with a one-piece, moisture resistant chipboard frame to eliminate corner separations. The spun glass filtering media shall be bonded with a resinous agent providing rigidity and resistance to media compression and meets UL class 2. 9. Filters shall be installed near the coil with two spring clips for easy removal. 10. Cabinet steel panels shall be lined with ½-inch dualdensity fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ ft3 for the face meeting NFPA 90A and 90B (appliances), NFPA 255, UL 181, UL723 and ASTM E84. 11. Motors shall be multi-speed of the permanent split capacitor type (PSC) and be directly coupled to the centrifugal fan blower. Motor shall be suitable for a power supply of 115V/1Ph/60Hz and shall be internally protected with an automatic thermal overload. Motor shaft shall be supported by sleeve bearings of the permanently lubricated type for the full life expectancy of the motor. All motors shall be directly mounted to the fan blower casing side and be isolated from the unit casing by three resilient anti-vibration mounts.

12. Size 03: Direct-driven fan shall be of the whisper quite type, single width single inlet (SWSI) forward curved statically and dynamically balanced at the factory. Size 04 & up: Direct-driven fan shall be of the whisper quite type, Double Width Double Inlet (DWDI) forward curved statically and dynamically balanced at the factory. The fan wheel and casing shall be constructed of galvanized steel. 13. Electric components shall be wired to a single control panel for single point power supply. 14. Condensate pan shall be single-wall 18-gauge G90 galvanized steel welded at the corners, thermally protected on the outside with fire and smoke rated ¼-inch high-density insulation to prevent condensation. The factory installed ⅞-inch OD sweat copper condensate connection shall be located at the lowest point of the condensate pan to ensure all water drains from the condensate pan (Consult Titus for availability). 15. A translucent flexible P-trap shall be installed and secured to the condensate tray connection via a spring clip for easy inspection and maintenance. 16. Discharge air plenum shall have discharge openings with a ½-inch discharge air collar(s) for location of the dry wall and/or field connection. Top discharge supply air flange shall be 1-inch. 17. Return air/access panel shall be of the stamped type made of 18-gauge galvanealed steel, painted white with polyester powder coated paint and oven baked.


Fan Coils

SUGGESTED SPECIFICATIONS Vertical Stack Units Optional Configurations

COOLING AND HEATING COILS

1. High-efficiency 3-, 4- and 5-row coils suitable for 2-pipe systems or, 2. High-efficiency single block with 2, 3 and 4 rows chilled water (CW) with 1-row re-heat/pre-heat coil suitable for 4-pipe system applications, or 3. High-efficiency single block with 2, 3 rows chilled water (CW) with 2-row re-heat/pre-heat coil suitable for 4-pipe system applications.

FILTER

1. Filter shall be 1-inch pleated filter with an average atmospheric dust spot efficiency range of 20 - 30% per ASHRAE Standard 52.1 test method, or 2. Filter shall be 1-inch washable filter consisting of synthetic fibers coated with a special resin, then baked together at a high temperature resulting in a tough and springy, thoroughly bonded, nearly rigid air filtration media. Washable filters shall have a longer service life, better structural integrity as well as being completely odor free. 3. A spare set of filters shall be available for replacement after the commissioning of the unit and prior to the handover of the project.

CABINET INSULATION

Cabinet liners shall be 1-inch dual-density fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances) and NFPA 255 with less than 25 flame and less than 50 smoke spread, UL 181, UL723 and ASTM E84.

MOTOR

1. Motor shall be suitable for 115V/1Ph/60Hz or 208V/1Ph/60Hz or 230V/1Ph/60Hz or 277V/1Ph/60Hz power supplies (delete as applicable). 2. A motor in-line quick disconnect shall be installed to facilitate the removal/replacement of motor.

THERMOSTAT AND ACCESSORIES

Refer to Accessories on page V86.

DISCONNECT SWITCHES AND FUSES

TWO-PIPE HEAT / COOL AUTO CHANGEOVER SWITCH

A mechanical or electronic changeover switch shall be supplied on 2-pipe systems for automatic changeover of the operation of the thermostat for summer and winter modes.

ELECTRIC HEATER AND ACCESSORIES

1. Electric heaters shall be of the wound type mounted in a metal frame and supported by ceramic rings and terminals. Electric heaters shall installed on the blower discharge side for better heat dissipation and shall include an automatic reset, high limit cut-out and contactor.

CHILLED AND HOT WATER VALVE CONTROLS

Refer to Accessories on page V86.

Fresh Air and Accessories

1. A fresh air opening shall be provided with an external 1-inch flange for field connection, or 2. A fresh air opening shall be provided with an external 1-inch flange for field connection complete with an internal manual adjustable damper control, or 3. A fresh air opening shall be provided with an external 1-inch flange for field connection complete with an automatic ON/OFF damper control which shall close if the unit is in the OFF mode. A freeze protection thermostat shall be installed at the fresh air intake and close the fresh air damper to prevent damage to the coil if temperature drops below 40°F.

V

CONDENSATE PAN AND ACCESSORIES

1. Condensate pan shall be single wall manufactured in 20-gauge 304 stainless steel and shall be thermally protected on the outside with fire and smoke rated ¼-inch high-density insulation to prevent condensation. The factory installed ⅞-inch OD sweat copper condensate connection shall be located at the lowest point of the condensate pan to ensure that all water is drained from the condensate pan (Consult Titus for availability), or 2. Condensate pan shall be double wall construction consisting of an outer and inner skin. The outer skin shall be manufactured of 18-gauge G90 galvanized sheet metal wrapped around the inner skin with 1-inch thermal insulation between both skins to prevent condensation. The inner skin of the double wall condensate pan shall be of 18-gague G90 galvanized sheet metal, or 3. Condensate pan shall be double wall construction consisting of an outer and inner skin. The outer skin shall be manufactured of 18-gauge G90 galvanized sheet metal wrapped around the inner skin with 1-inch thermal insulation between both skins to prevent the formation of condensation. The inner skin of the double wall condensate pan shall be of 20-gauge 304 stainless steel galvanized sheet metal. 4. An automatic safety overflow switch shall be installed in the condensate pan and shall prevent the operation of the unit electric system if an overflow status is detected.

SPECIFICATIONS

Units shall be wired for single point power supply with a disconnect switch and fuse(s) to match the unit full maximum circuit ampacity (MCA) in line with UL 1995.

2. 2-pipe standby electric heating - heaters shall be installed and pre-wired as standby heating in the eventuality of a failure of the primary hot water (HW) system. A changeover sensor shall be installed in each unit and the changeover between the failed hot water system and the standby electric heater shall be automatic.

www.titus-hvac.com | www.titus-energysolutions.com

FAN COILS

NOISE REDUCTION KIT

A noise reduction kit, fan section blank off acoustic panel shall be installed in the fan section to reduce the noise propagation thru the return air/access panel.

V25


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

SPECIFICATIONS

V

V26

UL 1479 FIRE RATING

Units shall be installed with ⅝-inch gypsum board X rated to meet a 1-hour fire rating in accordance with UL1479 standards.

DISCHARGE AIR GRILLES AND ACCESSORIES

1. Discharge air grilles shall be double-deflection made of aluminum and painted white, or 2. Discharge air grilles shall be double-deflection of the Deluxe type, made of aluminum and painted white, or 3. Discharge air grilles shall be non adjustable of the linear type, made of aluminum and painted white. 4. Units shall have dual discharge grilles with manual adjustable dampers to control the air discharge thru each air outlet. 5. Special discharge air grilles colors shall be______________. (Contact Titus for color range availability and price). 6. Discharge air grille location shall be in accordance with the project specification and drawings.

RETURN AIR / ACCESS PANEL AND ACCESSORIES

1. Remote Return air/access panel shall be installed away from the unit, stamped, galvanealed steel painted white with polyester powder coated paint, oven baked suitable for application where the unit is remote from the wall. Discharge air must be ducted to avoid air recirculation between the supply and the return air, or 2. ADA return air/access panel shall be stamped, galvanealed steel, painted white with polyester powder coated paint, oven baked and designed for applications to meet the Americans with Disability Act. The thermostat shall be installed in the return air/ access panel located at a max height of 48 inches from the floor. An in-line quick connector shall be provided between the thermostat and the unit electric control box to facilitate the removal of the return air/access panel, or 3. Remote ADA return air/access panel shall be installed away from the unit, stamped, galvanealed steel, painted white with polyester powder coated paint, oven baked and designed for applications to meet the Americans with Disability Act. The thermostat shall be installed in the return air/access panel located at a max height of 48” from the floor. An in-line quick connector shall be provided between the thermostat and the unit electric control box to facilitate the removal of the return air/ access panel, or 4. Invisislot return air/access panel shall be a blank front panel, galvanealed steel, painted white with polyester powder coated paint, oven baked. The panel shall be offset from the wall as per the manufacturers’ recommendations to allow the return air entry into the units, or 5. Deluxe return air/access panel shall be manufactured of aluminum, painted white with a removable core for easy access to the unit, or 6. Linear bar return air/access panel shall be manufactured of aluminum painted white with a removable core for easy access to the unit.

7. Special Return air/access panel color shall be___________. (Contact Titus for color range availability and price). 8. Return air/access panel security fasteners shall be tamperproof, which require a special tool to access the units, or 9. Return air/access panel security fasteners shall be of the quarter turn type, to facilitate the removal of the access panel.

RISER ASSEMBLY

1. Risers shall be installed at the factory and supplied in two pieces (riser and riser extension) to reduce field installation time or, supplied loose in a single piece for field installation. 2. Riser pipe diameters shall vary between ¾-inch and 2½ inches OD and be in accordance with the riser schedule. 3. Riser pipes shall be copper type M, L or K (Contact Titus for availability of K copper risers). 4. Riser insulation shall be of the closed cell, flexible elastomeric thermal insulation type available in ½- or ¾-inch wall thickness. 5. Riser connections shall be welded directly to the unit piping or, connected to the units via O-ring unions (risers supplied loose or separate Master/Drone units) or connected to the unit via O-ring unions and flexible braided connectors (risers supplied loose or separate Master/Drone units).

RISER EXTENSIONS

1. Riser extension material and insulation type shall be the same as the main risers attached to the unit. Riser extensions shall be supplied loose and clearly marked to bridge the space between the fixed risers of two units. All riser extension insulation shall be supplied loose uncut for field installation. 2. Riser extension length shall be in accordance with the riser schedule.

RISER EXTENSION CONNECTIONS

Riser extension end connections shall be swaged or installed with an expanding or reducing coupling in accordance with the riser schedule.


Fan Coils

HBC

Factory assembled, horizontal blow-thru ducted fan coils designed for concealed installations above ceilings with ducted air discharge and suitable for projects such as hotels, motels, condominiums and general commercial application.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All casing sheet metal components are fabricated of 18GA G90 galvanized steel. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside (Consult Titus for availability). • 1-inch discharge air flange. • Anti-Vibration Mounts for field installation.

OPTIONAL FEATURES INCLUDE

• 3-, 4- And 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-Pipe system applications (5 rows max). • LH or RH entry pipe connections. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies.

• Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch. ◊ Condensate pan safety overflow connection.

www.titus-hvac.com | www.titus-energysolutions.com

Horizontal Basic Series HBC

V

HBC

A Participating Corporation in the AHRI 440 Certification Program

V27


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS HBC CONCEALED CEILING TOP VIEW

1

3

7

4

10

5 521

6

23 8

9

1-INCH TYP

1

C A

381

V

1

RIGHT HAND UNIT SHOWN

B

FRONT VIEW

621

981

8

Motor Motor under protection plate Motor/Blower(s) Assemby Condensate Tray (Double Wall optional)

DIMENSIONS V28

A 25½ 28½ 34½ 43½ 51½ 61½ 71½

Dimensions (inches) B C 14.¼ 18¼ 17¼ 21¼ 23¼ 27¼ 32¼ 36¼ 40¼ 44¼ 50¼ 54¼ 60¼ 64¼

All dimensions are in inches.

1021

4

2

SIDE VIEW

5. Condensate Copper Connection 3 /4” MNPT 6. Coil Connections (2-Pipe Shown) 7. Installation Hanging Points 8. Coil

Model HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

Ø'D'

23 8

Note: Right Hand Unit Shown 1. 2. 3. 4.

183 8

981

9. Supply Air Flange 10. Electric Heaters (optional)

Approx. Weight D ⅝ ⅝ ⅝ ⅝ ⅝ ⅞ ⅞

(pounds) 43 52 65 76 85 115 118


Fan Coils

PERFORMANCE DATA

Model HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

Model HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

Model HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

Model

Total MBH 6.2 8.7 13.2 18.0 22.5 28.6 35.7

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH GPM ft WG MBH GPM ft WG 4.6 1.2 1.16 18.4 1.3 0.92 6.6 1.8 2.50 25.8 1.8 1.92 9.8 2.6 6.01 37.5 2.6 4.41 13.6 3.6 2.78 53.5 3.6 2.46 16.5 4.5 4.81 64.0 4.4 3.90 21.6 5.7 3.97 84.5 5.8 3.67 26.4 7.1 6.60 102.3 7.0 5.75

Total MBH 7.5 10.7 13.9 21.9 25.1 34.8 41.2

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH GPM ft WG MBH GPM ft WG 5.2 1.5 2.19 20.5 1.4 1.50 7.4 2.1 4.75 28.8 2.0 3.18 10.3 2.8 1.71 41.2 2.8 1.49 15.5 4.4 5.01 60.3 4.1 3.80 17.9 5.0 3.29 70.7 4.8 2.77 24.6 7.0 6.81 95.4 6.5 5.44 29.3 8.2 6.45 110.4 7.8 5.54

Total MBH 8.2 10.4 15.7 24.3 28.0 36.9 45.6

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH GPM ft WG MBH GPM ft WG 5.4 1.6 3.26 21.1 1.4 1.98 7.3 2.1 1.05 29.3 2.0 0.83 11.0 3.1 2.52 43.4 3.0 1.93 16.4 4.9 7.27 63.0 4.3 4.88 19.0 5.6 4.60 73.7 5.0 3.41 25.4 7.4 5.39 98.9 6.7 4.35 30.9 9.1 8.71 119.3 8.1 6.71

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

Model HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

Model HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

Total MBH 4.1 6.0 8.9 11.9 15.3 21.2 24.2

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH GPM ft WG MBH 3.4 0.8 0.35 8.0 4.8 1.2 1.89 11.0 7.2 1.8 1.89 15.7 10.0 2.4 0.96 23.4 12.2 3.0 1.72 27.3 16.6 4.2 3.65 36.4 19.5 4.8 2.52 44.1

Heating Flow PD GPM ft WG 0.5 0.46 0.8 0.93 1.1 2.07 1.6 5.89 1.9 1.36 2.5 2.80 3.0 4.58

Total MBH 6.0 8.5 12.5 17.2 21.5 27.3 34.0

4-PIPE SYSTEM 3 Rows Cooling 1 Row Sensible Flow PD Sensible MBH GPM ft WG MBH 4.4 1.2 1.07 7.7 6.3 1.7 2.33 10.6 9.2 2.5 5.47 15.1 12.9 3.4 2.55 22.5 15.6 4.3 4.42 26.2 20.5 5.5 3.63 35.0 25.0 6.8 6.02 42.4

Heating Flow PD GPM ft WG 0.5 0.44 0.7 0.89 1.0 1.98 1.5 5.57 1.8 1.42 2.4 2.81 2.9 4.65

Total MBH 7.1 10.1 13.1 20.8 23.8 33.1 38.9

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH GPM ft WG MBH 4.9 1.4 1.98 7.4 7.0 2.0 4.31 10.1 9.7 2.6 1.53 14.4 14.6 4.2 4.54 21.6 16.8 4.8 2.96 25.1 23.2 6.6 6.18 33.5 27.5 7.8 5.79 40.6

Heating Flow PD GPM ft WG 0.5 0.42 0.7 0.85 1.0 1.85 1.5 5.23 1.7 1.40 2.3 2.85 2.8 4.57

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.

V

PERFORMANCE DATA

HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Total Sensible Flow PD Sensible Flow PD MBH MBH GPM ft WG MBH GPM ft WG 4.3 3.6 0.9 0.39 14.2 1.0 0.37 6.3 5.1 1.2 0.85 19.8 1.4 0.77 9.2 7.5 1.8 2.02 28.5 1.9 1.74 12.4 10.5 2.5 1.03 40.6 2.8 1.12 15.8 12.8 3.2 1.86 48.0 3.3 1.78 22.0 17.4 4.4 3.94 65.7 4.5 3.52 25.1 20.4 5.0 2.72 78.0 5.3 2.78

www.titus-hvac.com | www.titus-energysolutions.com

HBC CONCEALED CEILING

V29


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA Nominal Air Volumes cfm (1) Model High Med Low HBC02 246 214 198 HBC03 358 316 278 HBC04 551 439 364 HBC06 776 631 471 HBC08 899 696 562 HBC10 1231 883 674 HBC12 1477 979 797

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

HBC02 HBC03

Motor Total AMPS 1/20 0.8 1/20 0.8

HBC04

1/20

0.8

HBC06 HBC08 HBC10 HBC12

1/10 1/10 1/10 1/10

1.5 1.5 1.5 1.5

Model

V

Air Model HBC02 HBC03 HBC04 HBC06 HBC08 HBC10 HBC12

HP

PERFORMANCE DATA

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

V30

Volume (cfm) Vs External Static Pressure in wg (2) 0.05 0.10 0.15 0.20 0.25 0.30 230 203 171 321 299 235 177 509 458 419 379 288 727 664 599 525 417 864 758 715 734 688 537 1178 1095 988 869 751 652 1405 1360 1293 1192 1090 1058

2. Air volumes at alternative external static pressures are based at high fan speed.


Horizontal Basic Series (continued)

Fan Coils

HBP

Factory assembled, horizontal blow-thru ducted HBP fan coils are designed for concealed installations above ceilings with ducted return and discharge air and are suitable for projects such as hotels, motels, condominiums and general commercial applications.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All casing sheet metal components fabricated of 18GA G90 galvanized steel. • Return air plenum thermally and acoustically insulated covering the motor(s)/blower(s) assembly to reduce noise dissipation from the unit. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-Inch thick disposable filter. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside. (Consult Titus for availability). • 1-Inch discharge air flange. • 1-Inch return air flange • Anti-vibration mounts for field installation.

OPTIONAL FEATURES INCLUDE

• 3-, 4- And 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • Automatic coil air vents. • LH or RH entry pipe connections. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters.

• Bottom or rear return air and filter location. • Filter supports with slides or clips. • Filter removal from LH/RH, bottom and rear. • Cabinet liner in ½-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect (Not available on bottom return filter). • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch. ◊ Condensate pan safety overflow connection.

www.titus-hvac.com | www.titus-energysolutions.com

HBP

V

HBP

A Participating Corporation in the AHRI 440 Certification Program

V31


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS HBP CONCEALED CEILING WITH PLENUM

TOP VIEW C

7 8

10

1 2

3

7

10

5 148

981

5 521

6 9

13 8 1-INCH TYP

V

SIDE VIEW 23 81 203 4

621

981

Return Air Flange Filter Rear Return Motor/Blower(s) Assemby Condensate Tray (Double Wall optional)

DIMENSIONS

HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

B 14¼ 17¼ 23¼ 32¼ 40¼ 50¼ 60¼

1

Ø'D' 10

4

Dimensions (inches) C D 18¼ ⅝ 21¼ ⅝ 27¼ ⅝ 36¼ ⅝ 44¼ ⅝ 54¼ ⅞ 64¼ ⅞

1-INCH BOTTOM FILTER SLIDE (OPTIONAL)

8

5. Condensate Copper Connection 3 /4” MNPT 6. Coil Connections (2-Pipe Shown) 7. Hanging Points 8. Coil

A 25½ 28½ 34½ 43½ 51½ 61½ 71½

1

12

33 4

FRONT VIEW

Model

V32

RIGHT HAND REAR RETURN UNIT SHOWN

B

8

1. 2. 3. 4.

1

E A

381

1

4

11

9. Supply Air Flange 10. Electric Control Panel - Note: Control box may mounted on either side. 11. Electric Heaters (optional) Approx. Weight

E 18¼ 21¼ 27¼ 36¼ 44¼ 54¼ 64¼

All dimensions are in inches.

Filter 20x12x1 23x12x1 29x12x1 38x12x1 46x12x1 56x12x1 66x12x1

(pounds) 63 70 80 99 106 136 150


Fan Coils

PERFORMANCE DATA

Model HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

Model HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

Model HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

Model

Total MBH 5.8 8.4 12.5 16.8 21.1 27.5 34.0

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.2 1.2 1.00 17.0 1.2 0.78 6.1 1.7 2.25 24.2 1.6 1.70 9.1 2.5 5.39 35.2 2.4 3.92 12.6 3.4 2.44 49.5 3.4 2.12 15.3 4.2 4.26 59.7 4.1 3.41 20.6 5.5 3.67 80.7 5.5 3.36 25.0 6.8 6.02 97.1 6.6 5.20

Total MBH 6.9 10.0 13.1 20.4 23.5 33.3 39.0

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.8 1.4 1.88 18.7 1.3 1.26 6.9 2.0 4.21 26.9 1.8 2.78 9.6 2.6 1.52 38.5 2.6 1.31 14.3 4.1 4.36 55.5 3.8 3.25 16.6 4.7 2.88 65.5 4.5 2.40 23.4 6.6 6.24 90.7 6.2 4.94 27.6 7.8 5.82 100.8 7.4 4.96

Total MBH 7.6 9.8 14.7 22.4 26.0 35.2 43.2

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 5.0 1.5 2.77 19.2 1.3 1.65 6.8 2.0 0.93 27.1 1.9 0.72 10.2 2.9 2.23 40.4 2.8 1.68 15.0 4.5 6.20 57.7 3.9 4.13 17.5 5.2 4.00 68.0 4.6 2.93 24.0 7.0 4.91 93.7 6.4 3.93 29.2 8.6 7.86 112.4 7.7 5.99

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

Model HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

Model HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

Total MBH 3.9 5.7 8.4 11.2 14.3 20.4 23.0

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 3.2 0.8 0.31 7.5 4.6 1.1 0.72 10.4 6.7 1.7 1.72 14.9 9.3 2.2 0.85 22.0 11.3 2.9 1.52 25.8 15.9 4.1 3.39 35.0 18.4 4.6 2.28 42.3

Heating Flow PD gpm ft wg 0.5 0.40 0.7 0.84 1.0 1.89 1.5 5.24 1.8 1.22 2.4 2.60 2.9 4.22

Total MBH 5.5 8.0 11.9 16.0 20.2 26.2 32.6

4-PIPE SYSTEM 3 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 4.0 1.1 0.93 7.2 5.8 1.6 2.07 10.0 8.7 2.4 4.92 14.4 11.9 3.2 2.22 21.1 14.5 4.0 3.91 24.8 19.5 5.2 3.34 33.7 23.8 6.5 5.53 40.6

Heating Flow PD gpm ft wg 0.5 0.38 0.7 0.80 1.0 1.80 1.4 4.94 1.7 1.27 2.3 2.60 2.8 4.28

Total MBH 6.6 9.5 12.3 19.2 22.2 31.6 37.0

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 4.5 1.3 1.70 6.9 6.5 1.9 3.81 9.6 9.0 2.5 1.35 13.7 13.4 3.8 3.91 20.2 15.6 4.4 2.58 23.7 22.0 6.3 5.64 32.2 26.0 7.4 5.23 38.9

Heating Flow PD gpm ft wg 0.5 0.36 0.7 0.76 0.9 1.68 1.4 4.63 1.6 1.25 2.2 2.63 2.7 4.19

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.

V

PERFORMANCE DATA

HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

Total MBH 4.1 5.9 8.7 11.6 15.0 21.2 24.1

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 3.3 0.8 0.34 13.2 0.9 0.32 4.8 1.2 0.77 18.6 1.3 0.69 7.0 1.7 1.84 26.9 1.8 1.56 9.7 2.3 0.92 37.6 2.6 0.97 11.9 3.0 1.66 45.9 3.1 1.58 16.7 4.2 3.66 62.9 4.3 3.24 19.4 4.8 2.50 74.3 5.1 2.54

www.titus-hvac.com | www.titus-energysolutions.com

HBP CONCEALED CEILING WITH PLENUM

V33


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA Nominal Air Volumes cfm (1) Model High Med Low HBP02 219 187 171 HBP03 326 289 230 HBP04 503 391 310 HBP06 696 567 439 HBP08 813 647 535 HBP10 1150 867 696 HBP12 1370 931 781

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

Model

V

Air Model HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

HBP02 HBP03 HBP04 HBP06 HBP08 HBP10 HBP12

Motor Total HP AMPS 1/20 0.8 1/20 0.8 1/20 0.8 1/10 1.5 1/10 1.5 1/10 1.5 1/10 1.5

PERFORMANCE DATA

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

V34

Volume (cfm) Vs External Static Pressure in wg (2) 0.05 0.10 0.15 0.20 0.25 0.30 198 182 166 289 262 219 150 478 441 399 341 245 651 613 569 504 401 777 722 681 658 628 536 1075 1012 939 848 737 616 1297 1236 1171 1095 1015 947

2. Air volumes at alternative external static pressures are based at high fan speed.


Horizontal Basic Series (continued)

Fan Coils

HBE

Factory assembled, horizontal blow-thru HBE fan coils are designed for exposed ceiling installations free blowing into the space suitable for projects such as hotels, motels, condominiums and general commercial applications.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All internal metal components are fabricated of 18GA G90 galvanized steel and the exposed metal casing panels are fabricated of 18GA galvanealed for superior adhesion of the powder paint. • Cabinet components are painted with a powder polyester baked coating in white or beige and are acoustically insulated to reduce noise dissipation from the unit. • Cabinet liner in ½-inch dual-density fiberglass. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-Inch thick disposable filter. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside. (Consult Titus for availability). • Stamped discharge grille. • Stamped return air/access panel grille. • Anti-vibration mounts for field installation.

OPTIONAL FEATURES INCLUDE

• 3-, 4- And 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • LH or RH entry pipe connections. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters.

• Cabinet liner in ½-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch. ◊ Condensate pan overflow connection. • Aluminum double deflection discharge air grilles. • Cabinet painted in a powder polyester baked coating in either white or beige colors (Contact Titus for special colors availability and prices). • Return air/access panel fasteners: ◊ Philips head screws. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners.

www.titus-hvac.com | www.titus-energysolutions.com

HBE

V

HBE

A Participating Corporation in the AHRI 440 Certification Program

V35


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS HBE EXPOSED CABINET

TOP VIEW A

141

141

B

7 -INCH TYP 8

141

3

103 4

3 2121

11

19

5 4 6

8

7

V

FRONT VIEW (W/ STANDARD STAMPED GRILLE) 15 8

541

RIGHT HAND UNIT SHOWN

D

SIDE VIEW

9

5 48

Ø'C' 1341

4

10

1. Access Panel w/ Return Air Stamped Grille 2. Filter 3. Motor/Blower(s) Assemby

4. Condensate Tray (Double Wall optional) 5. Condensate Connection 3/4” MNPT 6. Coil Connections (2-Pipe Shown) 7. Hanging Points

DIMENSIONS

Model

V36

HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

A 29¼ 32¼ 38¼ 47¼ 55¼ 65¼ 75¼

B 26¾ 29¾ 35¾ 44¾ 52.¾ 62¾ 72¾

Dimensions (inches) C ⅝ ⅝ ⅝ ⅝ ⅝ ⅞ ⅞

1

8. Coil 9. Discharge Air Stamped Grille 10. Electric Control Panel 11. Electric Heaters (optional)

Approx. Weight D 14 1511/16 211/16 3113/16 39⅛ 49½ 60

All dimensions are in inches.

2

(pounds) Filter 16x12x1 98 24x12x1 112 29x12x1 126 38x12x1 144 46x12x1 165 (2) 28x14x1 196 (2) 31x14x1 221


Fan Coils

PERFORMANCE DATA

Model HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

Model HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

Model HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

Model

Total MBH 5.5 8.2 11.8 16.2 20.9 26.4 32.7

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.0 1.1 0.92 16.0 1.1 0.71 6.0 1.6 2.16 23.6 1.6 1.62 8.6 2.3 4.85 33.1 2.3 3.49 12.1 3.2 2.29 47.6 3.3 1.97 15.2 4.2 4.19 59.1 4.0 3.35 19.7 5.3 3.40 77.3 5.3 3.09 23.9 6.5 5.57 92.8 6.3 4.77

Total MBH 6.6 9.8 12.3 19.6 23.3 31.9 37.3

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.5 1.3 1.70 17.6 1.2 1.13 6.7 2.0 4.04 26.2 1.8 2.64 9.0 2.5 1.35 36.0 2.5 1.15 13.7 3.9 4.06 53.2 3.6 3.00 16.4 4.7 2.83 64.9 4.4 2.35 22.3 6.4 5.73 86.5 5.9 4.51 26.3 7.5 5.34 100.3 7.0 4.52

Total MBH 7.1 9.5 13.8 21.5 25.7 33.7 41.2

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.7 1.4 2.49 18.0 1.2 1.47 6.6 1.9 0.88 26.4 1.8 0.68 9.5 2.8 1.98 37.6 2.6 1.47 14.4 4.3 5.79 55.1 3.8 3.79 17.3 5.2 3.92 67.2 4.6 2.87 22.9 6.7 4.52 89.1 6.1 3.57 27.7 8.2 7.16 110.6 7.3 5.41

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

Model HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

Model HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

4-PIPE SYSTEM 2 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 3.7 3.0 0.7 0.29 8.0 5.6 4.5 1.1 0.69 11.4 8.0 6.3 1.6 1.56 15.5 10.8 8.9 2.2 0.80 22.7 14.2 11.3 2.8 1.50 28.0 19.6 15.2 3.9 3.14 36.6 22.1 17.7 4.4 2.12 43.6

Heating Flow PD gpm ft wg 0.5 0.46 0.8 0.98 1.1 2.02 1.6 5.55 1.9 1.40 2.5 2.77 3.0 4.43

4-PIPE SYSTEM 3 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 5.3 3.8 1.1 0.84 7.6 7.8 5.7 1.6 1.98 10.9 11.2 8.1 2.2 4.43 14.8 15.5 11.4 3.1 2.08 21.7 20.0 14.4 4.0 3.85 26.8 25.3 18.6 5.0 3.12 35.0 31.2 22.7 6.2 5.11 41.8

Heating Flow PD gpm ft wg 0.5 0.43 0.7 0.92 1.0 1.90 1.5 5.19 1.8 1.43 2.4 2.74 2.9 4.42

4-PIPE SYSTEM 4 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 6.2 4.2 1.2 1.54 7.3 9.3 6.3 1.9 3.65 10.3 11.7 8.5 2.3 1.22 14.1 18.6 12.9 3.7 3.65 20.7 22.0 15.4 4.4 2.53 25.5 30.2 20.9 6.0 5.18 33.4 35.3 24.7 7.1 4.79 39.8

Heating Flow PD gpm ft wg 0.5 0.40 0.7 0.86 1.0 1.75 1.4 4.83 1.7 1.38 2.3 2.72 2.7 4.27

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.

V

PERFORMANCE DATA

HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

Total MBH 3.9 5.8 8.3 11.2 14.9 20.5 23.2

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 3.2 0.8 0.31 12.5 0.9 0.29 4.7 1.2 0.74 18.2 1.2 0.66 6.6 1.7 1.68 25.4 1.7 1.40 9.3 2.3 0.86 36.5 2.5 0.91 11.8 3.0 1.64 45.5 3.1 1.55 16.0 4.1 3.41 60.4 4.1 2.99 18.6 4.6 2.32 71.3 4.9 2.34

www.titus-hvac.com | www.titus-energysolutions.com

HBE EXPOSED CABINET

V37


www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA Nominal Air Volumes cfm (1) Model High Med Low HBE02 203 171 155 HBE03 316 278 219 HBE04 460 342 262 HBE06 658 535 396 HBE08 803 621 487 HBE10 1081 803 621 HBE12 1284 893 717

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

Model

V

HBE02 HBE03 HBE04 HBE06 HBE08 HBE10 HBE12

Motor Total HP AMPS 1/20 0.8 1/20 0.8 1/20 0.8 1/10 1.5 1/10 1.5 1/10 1.5 1/10 1.5

PERFORMANCE DATA

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

V38

Fan Coils


Horizontal Basic Series (continued)

Fan Coils

HBR

Factory assembled, horizontal blow-thru ducted HBR fan coils are designed for over ceiling installations with ducted discharge air suitable for projects such as hotels, motels, condominiums and general commercial applications.

STANDARD FEATURES INCLUDE

• Performance certified to AHRI Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All casing sheet metal components fabricated of 18GA G90 galvanized steel. • Fascia panels are fabricated of 18GA galvannealed for superior adhesion of the powder paint. • Telescopic ceiling fascia panel with adjustment up to 3 inches. • Cabinet liner in ½-inch dual-density fiberglass. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-Inch thick disposable filter. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside (Consult Titus for availability). • ¾-inch discharge air flange. • Stamped return air/access panel grille. • Anti-vibration mounts for field installation.

OPTIONAL FEATURES INCLUDE

• 3-, 4- And 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • LH or RH entry pipe connections. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters.

• Cabinet liner in ½-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect (Available with rear return air). • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch. ◊ Condensate pan safety overflow connection. • Bottom or rear return air. • Fascia panel painted in a powder polyester baked coating in either white or beige colors (Contact Titus for special colors availability and prices). • Return air/access panel fasteners: ◊ Philips head screws. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners.

www.titus-hvac.com | www.titus-energysolutions.com

HBR

V

HBR

A Participating Corporation in the AHRI 440 Certification Program

V39


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS HBR RECESSED CABINET TOP VIEW 7 8 181

B

3

13

1

12

481

19

5 4 6

7

V

Ø7 8 -INCH TYP

41 141 4

RIGHT HAND UNIT SHOWN

8 FRONT VIEW C

9

SIDE VIEW 13 4 -INCH TYP

2121

3 4

Ø'D'

621

5 13 1 128 4 121

3 -INCH Flange 4

11

10

ADJUST 0 TO 3 INCHES

2 24 3 8

A

1. Access Panel w/ Return Air Stamped Grille 2. Filter 3. Motor/Blower(s) Assemby 4. Condensate Tray (Double Wall optional) 5. Condensate Connection 3/4” MNPT

6. Coil Connections (2-Pipe Shown) 7. Hanging Points 8. Coil 9. Supply Air Flange 10. Electric Control Panel

DIMENSIONS

Model

V40

121

HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

A 32¾ 35¾ 41¾ 50¾ 58¾ 68¾ 78¾

B 31½ 34½ 40½ 49½ 57½ 67½ 77½

Dimensions (inches) C D 14¼ ⅝ 17¼ ⅝ 23¼ ⅝ 32¼ ⅝ 40¼ ⅝ 50¼ ⅞ 60¼ ⅞

11. Telescopic Return Air / Access Panel 12. Electric Heaters (optional) 13. Side access panel

Approx. Weight Filter 24x12x1 28x12x1 28x12x1 42x12x1 50x12x1 (2) 30x12x1 (2) 34x12x1

All dimensions are in inches.

(pounds) 100 115 130 145 170 200 225


Fan Coils

PERFORMANCE DATA

Model HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

Model HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

Model HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

Model

Total MBH 6.0 8.2 11.3 16.2 20.6 24.8 30.9

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.5 1.2 1.09 17.9 1.2 0.86 6.0 1.6 2.16 23.6 1.6 1.62 8.2 2.3 4.50 31.7 2.2 3.22 12.0 3.2 2.26 47.4 3.2 1.95 14.9 4.1 4.06 58.0 4.0 3.23 18.3 5.0 3.01 72.0 4.9 2.70 22.4 6.2 5.01 87.3 6.0 4.24

Total MBH 7.3 9.8 11.8 19.5 22.9 29.7 35.2

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 5.0 1.5 2.06 19.8 1.4 1.40 6.7 2.0 4.03 26.2 1.8 2.64 8.6 2.4 1.25 34.4 2.4 1.06 13.6 3.9 4.02 53.0 3.6 2.96 16.1 4.6 2.73 63.5 4.3 2.26 20.6 5.9 5.00 80.2 5.5 3.90 24.6 7.0 4.76 96.0 6.6 3.98

Total MBH 8.0 9.6 13.3 21.4 25.2 33.7 38.7

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 5.3 1.6 3.07 20.3 1.4 1.85 6.6 1.9 0.89 26.4 1.8 0.68 9.1 2.7 1.83 35.8 2.4 1.34 14.3 4.3 5.69 54.8 3.7 3.74 16.9 5.0 3.76 65.7 4.5 2.75 22.9 6.7 4.52 89.1 6.1 3.57 25.8 7.7 6.34 99.3 6.8 4.73

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

Model HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

Model HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

Total MBH 4.1 5.6 7.7 10.8 14.0 18.5 21.1

4-PIPE SYSTEM 2 Rows Cooling 1 Row Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 3.3 0.8 0.34 7.8 0.5 0.43 4.5 1.1 0.69 10.2 0.7 0.81 6.1 1.5 1.46 13.7 0.9 1.61 8.8 2.1 0.79 21.2 1.4 5.55 11.1 2.8 1.46 25.1 1.7 1.16 14.2 3.7 2.81 31.9 2.2 2.18 16.7 4.2 1.93 38.7 2.6 3.58

Total MBH 5.8 7.8 10.8 15.4 19.7 23.7 29.6

4-PIPE SYSTEM 3 Rows Cooling 1 Row Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.3 1.2 1.02 7.5 0.5 0.41 5.7 1.6 1.98 9.8 0.7 0.77 7.8 2.2 4.15 13.2 0.9 1.53 11.4 3.1 2.08 20.4 1.4 4.60 14.1 3.9 3.72 24.1 1.6 1.21 17.4 4.7 2.76 30.7 2.1 2.17 21.3 5.9 4.59 37.2 2.5 3.61

Total MBH 6.9 9.3 11.2 18.5 21.6 28.2 33.3

4-PIPE SYSTEM 4 Rows Cooling 1 Row Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.7 1.4 187.00 7.2 0.5 0.39 6.3 1.9 3.65 9.4 0.6 0.73 8.1 2.2 1.13 12.6 0.9 1.42 12.8 3.7 3.62 19.4 1.3 4.31 15.1 4.3 2.45 23.1 1.6 1.18 19.4 5.6 4.54 29.3 2.0 2.18 23.0 6.6 4.26 35.5 2.4 3.51

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.

V

PERFORMANCE DATA

HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

Total MBH 4.2 5.8 8.0 11.2 14.6 19.3 22.0

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 3.5 0.8 0.37 13.8 0.9 0.35 4.7 1.2 0.74 18.2 1.2 0.66 6.4 1.6 1.57 24.4 1.7 1.30 9.3 2.2 0.86 36.3 2.5 0.90 11.6 2.9 1.59 44.7 3.1 1.50 14.9 3.9 3.05 56.6 3.9 2.64 17.5 4.4 2.10 67.3 4.6 2.09

www.titus-hvac.com | www.titus-energysolutions.com

HBR RECESSED CABINET

V41


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA Nominal Air Volumes cfm (1) Model High Med Low HBR02 235 209 182 HBR03 316 262 203 HBR04 433 310 225 HBR06 653 471 321 HBR08 781 615 449 HBR10 979 861 567 HBR12 1177 931 642

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

Model

V

Air Volume (cfm) Vs External Static Pressure in wg (2) Model 0.05 0.10 0.15 0.20 0.25 0.30 HBR02 198 150 102 HBR03 278 241 193 166 HBR04 401 363 337 310 235 HBR06 602 546 508 473 380 HBR08 690 624 578 542 497 419 HBR10 911 840 769 693 602 475 HBR12 1106 1044 986 927 859 775

HBR02 HBR03 HBR04 HBR06 HBR08 HBR10 HBR12

Motor Total HP AMPS 1/20 0.8 1/20 0.8 1/20 0.8 1/10 1.5 1/10 1.5 1/10 1.5 1/10 1.5

PERFORMANCE DATA

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

V42

2. Air volumes at alternative external static pressures are based at high fan speed.


Fan Coils

SUGGESTED SPECIFICATIONS

11. Motors shall be multi-speed of the permanent split capacitor type (PSC) and be directly coupled to the centrifugal fan blower. Motor shall be suitable for a power supply of 115V/1Ph/60Hz and shall be internally protected with an automatic thermal overload. Motor shaft shall be supported by sleeve bearings of the permanently lubricated type for the full life expectancy of the motor. All motors shall be directly mounted to the fan deck and be isolated from the unit casing by two resilient anti-vibration mounts. 12. Direct-driven fan(s) shall be of the whisper quite type, double width, double inlet (DWDI) forward curved statically and dynamically balanced at the factory. The fan wheel and casing shall be constructed of galvanized steel. 13. Electric components shall be wired to a single control panel for single point power supply. Wiring exposed to the outside of the units shall be installed in conduits to meet UL 1995 safety requirements. 14. Condensate pans shall be single-wall 18-gauge G90 galvanized steel welded at the corners, thermally protected on the outside with fire and smoke rated ¼-inch high-density insulation to prevent condensation. The factory installed 3/4” MNPT condensate connection shall be located at the lowest point of the condensate pan to ensure all water drains from the condensate pan (Consult TIitus for availability). 15. Discharge air flange (HBC and HBP units only) shall be 1-inch or ¾-inch (HBR unit only) to facilitate the connection of field ducts. 16. Return air flanges (HBP and HBR units only) shall be 1-inch to facilitate the connection of field ducts. 17. Return air grilles/access panels (HBR and HBE only) shall be of the stamped louvered type and be removable for better access on the field. 18. Four (4) anti-vibration rubber mountings shall be provided for field installation in order to isolate any cabinet vibrations from the building structure.

V

FAN COILS Horizontal Basic Units Optional Configurations

COOLING AND HEATING COIL

1. Shall be high-efficiency 3-, 4- and 5-row coils suitable for 2-pipe systems, or 2. High-efficiency single block with 2, 3 and 4 rows chilled water (CW) with 1-row re-heat/pre-heat coil suitable for 4-pipe system applications, or 3. High-efficiency single block with 2, 3-rows chilled water (CW) with 2-row re-heat/pre-heat coil suitable for 4-pipe system applications.

SPECIFICATIONS

1. Furnish and install Titus models HBC, HBP, HBE and HBR horizontal basic fan coils of sizes and capacities shown on the plans to meet prevailing cooling and heating requirements. 2. Fan coils shall be performance certified to AHRI Standard 440. Units shall be wired in compliance with ANSI/UL 1995 Standard and listed with ETL. 3. Fan coils shall be sound tested in accordance with AHRI Standard 260 for ducted units and AHRI Standard 350 for non-ducted units. Manufacturer shall provide these dB ratings on request for each model specified. 4. Unit casing shall be 18-gauge, zinc coated, phosphate treated, galvanized steel. Painted sheet metal components (HBE and HBR units only) components shall be 18-gauge galvanealed sheet metal. 5. Painted panels (HBE and HBR units only) shall be painted with a polyester powder coating, electrostatically applied, oven baked to 400°F for 10 minutes in beige or white tones. 6. High-efficiency, 2-row coil shall be suitable for a 2-pipe system. Coils shall be manufactured with aluminum fins mechanically bonded to seamless copper tubes. The copper tubes shall be ⅜-inch OD with a wall thickness of 0.014-inch which comply with ASTM B-75. The fins shall be waved with ripple edges for superior efficiency with a thickness of 0.0045-inch and spaced at 10 fpi. Coils rated to 300 psi operational pressure. All coils shall be shipped with a safety air pressure of 30 - 50 psi to guarantee a leak free arrival at the final destination. 7. Unit pipe entry location shall be in accordance with the project schedule. 8. Coils shall be installed with manual Schrader type air vents with a sealing cap and be located at the highest point of the coil. The cap shall have a dual purpose, to seal any potential water leakage in the eventuality of Schrader valve failure and as a service tool for the extraction/insertion of the internal Schrader valve. 9. Standard filters (HBP, HBR and HBE only) shall be 1-inch nominal thickness of the disposable type with a onepiece moisture resistant chipboard frame to eliminate corner separations. The spun glass filtering media shall be bonded with a resinous agent providing rigidity and resistance to media compression and meets UL class 2. 10. Cabinets (HBP, HBR and HBE only) shall be lined with ½-inch dual-density fiberglass with a density of 1.5lbs/ ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances), NFPA 255, UL 181, UL723 and ASTM E84.

www.titus-hvac.com | www.titus-energysolutions.com

FAN COILS Horizontal Basic Units Standard Configurations

V43


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

V

FILTER

1. Filter shall be 1-inch pleated filter with an average atmospheric dust spot efficiency range of 20 - 30% per ASHRAE Standard 52.1 test method, or 2. Filter shall be 1-inch washable filter consisting of synthetic fibers coated with a special resin, then baked together at a high temperature resulting in a tough and springy, thoroughly bonded, nearly rigid air filtration media. Washable filters shall have a longer service life; better structural integrity as well as being completely odor free. 3. A spare set of filters shall be available for replacement after the commissioning of the unit and prior to the handover of the project.

Refer to Accessories on page V86.

Condensate Pan and Accessories 1. Condensate pan shall be single wall manufactured in 20-gauge 304 stainless steel and shall be thermally protected on the outside with fire and smoke rated ¼-inch high-density insulation to prevent condensation. The factory installed 3/4” MNPT condensate connection shall be located at the lowest point of the condensate pan to ensure that all water is drained from the condensate pan (Consult Titus for availability), or 2. Condensate pan shall be double wall construction consisting of an outer and inner skin. The outer skin shall be manufactured of 18-gauge G90 galvanized sheet metal wrapped around the inner skin with 1-inch thermal insulation between both skins to prevent condensation. The inner skin of the double wall condensate pan shall be of 18-gague G90 galvanized sheet metal, or 3. Condensate pan shall be double wall construction consisting of an outer and inner skin. The outer skin shall be manufactured of 18-gauge G90 galvanized sheet metal wrapped around the inner skin with 1.00” thermal insulation between both skins to prevent the formation of condensation. The inner skin of the double wall condensate pan shall be of 20-gauge 304 stainless steel galvanized sheet metal. 4. An automatic safety overflow switch shall be installed in the condensate pan and shall prevent the operation of the unit electric system if an overflow status is detected.

DISCONNECT SWITCH AND FUSES

DISCHARGE AIR GRILLES AND ACCESSORIES - HBE ONLY

CABINET INSULATION

Cabinet liners shall be 1-inch dual-density fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances) and NFPA 255 with less than 25 flame and less than 50 smoke spread, UL 181, UL723 and ASTM E84.

MOTOR AND MOTOR ACCESSORIES

1. Motors shall be suitable for 115V/1Ph/60Hz or 208V/1Ph/60Hz or 230V/1Ph/60Hz or 277V/1Ph/60Hz power supplies (delete as applicable). 2. A motor in-line quick disconnect shall be installed to facilitate the removal/replacement of motor (HBP and HBR).

THERMOSTAT AND ACCESSORIES

Units shall be wired for single point power supply with a disconnect switch and fuse(s) to match the unit full minimum circuit ampacity (MCA) in line with UL 1995.

TWO-PIPE HEAT / COOL AUTO CHANGEOVER SWITCH

A mechanical changeover switch shall be supplied on 2-pipe systems for automatically change over of the operation of the thermostat for summer and winter modes.

SPECIFICATIONS

ELECTRIC HEATER AND ACCESSORIES

V44

CHILLED AND HOT WATER VALVE CONTROLS

Refer to Accessories on page V86.

1. Electric heaters shall be of the wound type mounted in a metal frame and supported by ceramic rings and terminals. Electric heaters shall installed on the blower and coil discharge side for better heat dissipation and shall include an automatic reset high limit cut-out and contactor. 2. 2-pipe standby electric heating - heaters shall be installed and pre-wired as standby heating in the eventuality of a failure of the primary hot water (HW) system. A changeover sensor shall be installed in each unit and the changeover between the failed hot water system and the standby electric heater shall be automatic.

1. Discharge air grilles shall be double-deflection made of aluminum and painted white for white painted cabinet units or aluminum for beige painted cabinets. 2. Special discharge air grilles colors shall be______________. (Contact Titus for color range availability and price).

RETURN AIR / ACCESS PANEL AND ACCESSORIES - HBR AND HBE ONLY

1. Return air/access panel security fasteners shall be tamperproof, which require a specialist tool to access the units, or 2. Return air/access panel security fasteners shall be of the quarter turn type, to facilitate the removal of the access panel.


Fan Coils

VBC

Factory assembled, vertical blow-thru, ducted VBC fan coils are designed for concealed installations inside a closet or furred-in under a window and ducted, for projects such as public buildings, hotels, schools, hospitals and general commercial applications.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All sheet metal components fabricated of 18GA G90 galvanized steel. • Cabinet liner in ½-inch dual-density fiberglass. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • Easily removal 1-inch thick disposable filter. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally insulated on the outside. (Consult Titus for availability). • Single wall auxiliary condensate pan thermally insulates on the outside. • Top discharge air flange.

OPTIONAL FEATURES INCLUDE

• 3-, 4- And 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • LH or RH pipe entry connections. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Cabinet liner in ½-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies.

• Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supplies disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Fresh air opening. • Fresh air with manual or auto dampers. • Fresh air freeze protection. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Single wall auxiliary condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Auxiliary condensate pan overflow safety switch. ◊ Remote discharge air grilles: ◊ Stamped with access doors ◊ Aluminum double deflection ◊ Deluxe aluminum double deflection grilles (Contact Titus for availability). ◊ Linear bar aluminum grilles (Contact Titus for availability). ◊ Special discharge air grille colors (Contact Titus for color range availability and price). ◊ Remote stamped return air/access panel with filter access door.

www.titus-hvac.com | www.titus-energysolutions.com

Vertical Basic Series VBC

V

VBC

A Participating Corporation in the AHRI 440 Certification Program

V45


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS VBC CONCEALED FLOOR TOP VIEW A 6 3/8"

4 1/4"

C

4 3/16"

5 7/16"

FRONT VIEW 1

2

2"

SIDE VIEW 5"

3

Ø'D' 10

V

4

25 5/8"

5 8

6 2"

6 3/16"

7 F

1/2"

B

9

E

10 7/8"

5 5/16"

Note: Right Hand Unit Shown

DIMENSIONS

1. 2. 3. 4.

V46

Supply Air Flange = “C” Coil Coil Connections (2-Pipe Shown) Motor/Blower(s) Assemby

5. 6. 7. 8.

Auxiliary Condensate Tray Condensate Connection Filter Control box

Model VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

A 31¾ 34¾ 38¾ 49¾ 57¾ 67¾ 77¾

B 19½ 22½ 26½ 37½ 45½ 55½ 65½

C 11 14 18 29 37 47 57

Dimensions (inches) D E ⅝ 12 ⅝ 12 ⅝ 12 ⅝ 24 ⅝ 24 ⅞ 36 ⅞ 36

9. Fresh Air Damper Opening (optional) = 2” x “E” 10. Electric Heaters (optional)

Approx. Weight F 3¾ 5¼ 7¼ 6¾ 10¾ 9¾ 14¾

All dimensions are in inches.

(pounds) Filter 17x10x1 63 20x10x1 70 24x10x1 80 35x10x1 99 43x10x1 106 2(26)x10x1 136 2(31)x10x1 150


Fan Coils

PERFORMANCE DATA

Model VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

Model VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

Model VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

Model

Total MBH 5.9 8.0 11.2 16.1 20.3 24.6 31.0

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.5 1.2 1.01 18.1 1.2 0.84 5.9 1.6 1.99 23.4 1.6 1.55 8.2 2.2 4.26 31.8 2.2 3.14 12.1 3.2 2.21 47.8 3.3 1.95 14.8 4.0 3.89 57.6 3.9 3.14 18.2 4.9 2.93 71.9 4.9 2.67 22.6 6.2 4.97 88.0 6.0 4.27

Total MBH 7.2 9.6 11.7 19.5 24.2 29.7 37.0

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 5.1 1.4 1.97 20.1 1.4 1.39 6.7 1.9 3.78 26.0 1.8 2.55 8.6 2.3 1.19 34.7 2.4 1.05 13.7 3.9 3.95 53.5 3.7 2.97 16.6 4.8 6.77 64.0 4.4 4.75 20.6 5.9 4.94 80.2 5.5 3.87 25.4 7.4 8.31 97.9 6.7 6.19

Total MBH 8.0 10.6 13.2 21.5 26.4 32.5 40.4

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 5.4 1.6 2.97 20.8 1.4 1.86 7.1 2.1 5.64 27.0 1.8 3.40 9.1 2.6 1.77 36.2 2.5 1.34 14.4 4.3 5.66 55.6 3.8 3.78 17.4 5.3 9.56 66.1 4.5 6.00 21.7 6.5 6.78 82.9 5.7 4.72 26.7 8.1 11.30 101.2 6.9 7.58

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

Model VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

Model VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

Total MBH 3.9 5.4 7.6 10.7 13.7 18.4 21.0

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 3.3 0.8 0.31 7.7 4.4 1.1 0.63 10.0 6.1 1.5 1.36 13.6 8.9 2.1 0.76 21.2 10.9 2.7 1.39 25.8 14.2 3.7 2.76 32.8 16.7 4.2 1.91 40.0

Heating Flow PD gpm ft wg 0.5 0.41 0.7 0.76 0.9 1.53 1.4 4.76 1.8 8.21 2.2 15.46 2.7 26.00

Total MBH 5.7 7.6 10.7 15.4 19.4 23.5 29.6

4-PIPE SYSTEM 3 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 4.3 1.1 0.94 7.4 5.6 1.5 1.81 9.7 7.8 2.1 3.90 13.0 11.5 3.1 2.03 20.4 14.0 3.9 3.57 24.8 17.3 4.7 2.69 31.4 21.4 5.9 4.56 38.3

Heating Flow PD gpm ft wg 0.5 0.39 0.7 0.72 0.9 1.46 1.4 4.50 1.7 7.73 2.1 14.44 2.6 24.40

Total MBH 6.9 9.1 11.1 18.5 22.9 28.0 34.9

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 4.8 1.4 1.78 7.1 6.3 1.8 3.39 9.2 8.1 2.2 1.07 12.4 12.9 3.7 3.57 19.4 15.6 4.6 6.11 23.6 19.4 5.6 4.43 30.0 23.9 7.0 7.42 36.6

Heating Flow PD gpm ft wg 0.5 0.37 0.6 0.68 0.9 1.36 1.3 4.22 1.6 7.21 2.0 13.43 2.5 22.65

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.

V

PERFORMANCE DATA

VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 4.1 3.5 0.8 0.33 13.8 0.9 0.34 5.6 4.6 1.1 0.66 18.0 1.2 0.62 7.9 6.3 1.6 1.47 24.4 1.7 1.26 11.1 9.3 2.2 0.83 36.5 2.5 0.90 14.4 11.5 2.9 1.52 44.3 3.0 1.45 19.1 14.8 3.8 2.95 56.5 3.9 2.60 21.9 17.5 4.4 2.06 67.8 4.6 2.10

www.titus-hvac.com | www.titus-energysolutions.com

VBC CONCEALED FLOOR

V47


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA Nominal Air Volumes cfm (1) Model High Med Low VBC02 246 214 187 VBC03 321 268 209 VBC04 444 326 241 VBC06 669 482 332 VBC08 781 626 471 VBC10 984 872 583 VBC12 1198 952 669

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

Model

V

Air Volume (cfm) Vs External Static Pressure in wg (2) Model 0.05 0.10 0.15 0.20 0.25 0.30 VBC02 198 150 102 VBC03 278 241 193 166 VBC04 402 363 338 310 235 VBC06 602 545 509 473 380 VBC08 690 624 578 542 497 419 VBC10 912 839 769 693 601 476 VBC12 1107 1043 987 928 858 775

VBC02 VBC03 VBC04 VBC06 VBC08 VBC10 VBC12

Motor Total HP AMPS 1/30 0.5 1/30 0.5 1/20 0.8 1/20 0.8 1/20 0.8 1/20 0.8 1/20 0.8

PERFORMANCE DATA

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

V48

2. Air volumes at alternative external static pressures are based at high fan speed.


Vertical Basic Series (continued)

Fan Coils

Factory assembled, vertical blow-thru, slim and attractively styled VBF fan coils are designed for exposed floor standing applications such as public buildings, hotels, schools, hospitals and general commercial applications. VBF

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All internal sheet metal components are fabricated of 18GA G90 galvanized steel and exposed metal casing panels fabricated of 18GA galvanealed for superior adhesion of the powder paint. • Cabinet components are painted with a powder polyester baked coating in white or beige and are acoustically insulated to reduce noise dissipation from the unit. • Cabinet liner in ½-inch dual-density fiberglass. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • Easily removal 1-inch thick disposable filter. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally insulated on the outside (Consult Titus for availability). • Single wall auxiliary condensate pan thermally insulated on the outside. • Flat stamped discharge top grille. • Electric controls and valve package access doors.

OPTIONAL FEATURES INCLUDE

V

VBF

• 3-, 4- And 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • LH or RH pipe connections entry. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Cabinet liner in ½-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect.

• Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Fresh air opening. • Fresh air with manual or auto dampers. • Fresh air freeze protection. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Single wall auxiliary condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Auxiliary condensate pan overflow safety switch. • Discharge air grilles: ◊ Aluminum single deflection, left/right or front/back ◊ Deluxe aluminum single deflection grilles (Consult Titus for availability). ◊ Linear bar aluminum grilles (Consult Titus for availability). ◊ Special discharge air grille colors (Contact Titus for color selection and price). • Special cabinet paints. (Contact Titus for special colors availability and prices). • Heavy duty access panel in 16GA painted steel • Return air/access panel fasteners: ◊ Philips head screws. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners. ◊ Access doors keyed locks.

www.titus-hvac.com | www.titus-energysolutions.com

VBF

A Participating Corporation in the AHRI 440 Certification Program

V49


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS VBF FLAT TOP CABINET

TOP VIEW

2

3

1

FRONT VIEW

4

SIDE VIEW 10 7/8"

5

V

10

6

11 25 16

8 7

2" 1/2"

3" D

C B A

9

2"

2"

Note: Right Hand Unit Shown

1. 2. 3. 4.

Control Box Stamped Supply Air Grille Control Access Door Coil

5. 6. 7. 8.

Coil Connections (2-Pipe Shown) Motor/Blower(s) Assemby Condensate Connection. Filter

A 34¼ 37¼ 41¼ 52¼ 60¼ 70¼ 80¼

Dimensions (inches) C D 12 11⅛ 12 12⅝ 12 14⅝ 24 14⅛ 24 18⅛ 36 17⅛ 36 22⅛

DIMENSIONS

Model

V50

VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

B 18 21 25 36 44 54 64

9. Fresh Air Damper Opening (optional) = 2” x “C” 10. Electric Heaters (optional)

Approx. Weight (pounds) Filter 17x10x1 95 20x10x1 104 24x10x1 106 35x10x1 128 43x10x1 146 (2)26x10x1 178 (2)31x10x1 186

All dimensions are in inches.


Fan Coils

PERFORMANCE DATA

Model VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

Model VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

Model VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

Model

Total MBH 5.8 7.9 11.0 15.8 20.3 24.5 30.6

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.3 1.2 0.96 17.5 1.2 0.79 5.8 1.6 1.95 23.1 1.6 1.51 8.0 2.2 4.14 31.2 2.1 3.03 11.9 3.2 2.15 46.9 3.2 1.88 14.8 4.1 3.89 57.5 3.9 3.14 18.2 4.9 2.92 71.6 4.9 2.64 22.2 6.1 4.88 86.8 5.9 4.16

Total MBH 7.0 9.5 11.5 19.2 24.2 29.5 36.6

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.9 1.4 1.86 19.4 1.3 1.30 6.6 1.9 3.70 25.8 1.8 2.48 8.4 2.3 1.16 34.0 2.3 1.01 13.4 3.8 3.84 52.4 3.6 2.87 16.6 4.8 6.79 64.0 4.4 4.75 20.5 5.9 4.91 79.8 5.4 3.83 25.1 7.3 8.13 96.5 6.6 6.03

Total MBH 7.7 10.4 13.0 21.1 26.4 32.4 39.8

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 5.1 1.5 2.79 20.0 1.4 1.73 7.0 2.1 5.51 26.7 1.8 3.31 9.0 2.6 1.71 35.4 2.4 1.29 14.2 4.2 5.47 54.4 3.7 3.63 17.4 5.3 9.56 66.1 4.5 6.00 21.5 6.5 6.73 82.5 5.6 4.67 26.3 7.9 11.00 99.7 6.8 7.36

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

Model VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

Model VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

Total MBH 3.8 5.3 7.5 10.5 13.7 18.3 20.8

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 3.2 0.8 0.29 8.5 4.3 1.1 0.61 11.0 6.0 1.5 1.33 14.7 8.7 2.1 0.74 22.3 10.9 2.7 1.39 27.3 14.0 3.6 2.71 34.2 16.5 4.2 1.87 41.1

Heating Flow PD gpm ft wg 0.6 0.49 0.8 0.90 1.0 1.76 1.5 5.24 1.9 9.08 2.3 16.70 2.8 27.50

Total MBH 5.5 7.5 10.4 15.2 19.4 23.4 29.3

4-PIPE SYSTEM 3 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 4.1 1.1 0.89 8.2 5.6 1.5 1.78 10.6 7.6 2.1 3.79 14.0 11.3 3.0 1.97 21.4 14.0 3.9 3.57 26.1 17.2 4.7 2.67 32.7 21.1 5.9 4.47 39.4

Heating Flow PD gpm ft wg 0.6 0.46 0.7 0.85 1.0 1.66 1.5 4.90 1.8 8.49 2.2 15.54 2.7 25.63

Total MBH 6.7 9.0 10.9 18.2 22.9 27.9 34.6

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 4.6 1.3 1.68 7.8 6.2 1.8 3.34 10.1 7.9 2.2 1.04 13.4 12.7 3.6 3.46 20.4 15.6 4.6 6.12 24.9 19.3 5.6 4.41 31.2 23.6 6.9 7.30 37.5

Heating Flow PD gpm ft wg 0.5 0.43 0.7 0.80 0.9 1.53 1.4 4.57 1.7 7.88 2.1 14.38 2.6 23.69

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.

V

PERFORMANCE DATA

VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 4.0 3.4 0.8 0.31 13.4 0.9 0.32 5.5 4.5 1.1 0.65 17.8 1.2 0.61 7.8 6.2 1.6 1.43 23.9 1.6 1.22 11.0 9.1 2.2 0.80 35.9 2.4 0.87 14.4 11.5 2.9 1.52 44.3 3.0 1.45 19.0 14.8 3.8 2.94 56.2 3.8 2.58 21.8 17.3 4.3 2.04 66.9 4.6 2.05

www.titus-hvac.com | www.titus-energysolutions.com

VBF FLAT TOP CABINET

V51


www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA Nominal Air Volumes cfm (1) Model High Med Low VBF02 235 209 182 VBF03 316 262 203 VBF04 433 310 225 VBF06 653 471 321 VBF08 781 615 449 VBF10 979 861 567 VBF12 1177 931 642

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

Model

V

VBF02 VBF03 VBF04 VBF06 VBF08 VBF10 VBF12

Motor Total HP AMPS 1/30 0.5 1/30 0.5 1/20 0.8 1/20 0.8 1/20 0.8 1/20 0.8 1/20 0.8

PERFORMANCE DATA

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

V52

Fan Coils


Vertical Basic Series (continued)

Fan Coils

VBA

Factory assembled, vertical blow-thru, slim and attractively styled VBA fan coils are designed for exposed floor standing applications such as public buildings, hotels, schools, hospitals and general commercial applications.

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All internal sheet metal components are fabricated of 18GA G90 galvanized steel and exposed metal casing panels fabricated of 18GA galvanealed for superior adhesion of the powder paint. • Cabinet components are painted with a powder polyester baked coating in white or beige and are acoustically insulated to reduce noise dissipation from the unit. • Cabinet liner in ½-inch dual-density fiberglass. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • Easily removal 1-inch thick disposable filter. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally insulated on the outside (Consult Titus for availability). • Single wall auxiliary condensate pan thermally insulated on the outside. • Angle stamped discharge top/grille. • Electric controls and valve package access doors.

OPTIONAL FEATURES INCLUDE

V

VBA

• 3-, 4- And 5-row coils for 2-pipe systems. • Single block 2, 3 and 4 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (5 rows max). • Single block 2 and 3 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • Automatic coil air vents. • LH or RH pipe connections entry • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Cabinet liner in ½-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supply disconnect switch and fuses.

• Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Fresh air opening. • Fresh air with manual or auto dampers. • Fresh air freeze protection. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan mastic coating applicable to the inside of the condensate pans for a prolonged life. ◊ Single wall auxiliary condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Auxiliary condensate pan mastic coating applicable to the inside of the condensate pans for a prolonged life. ◊ Auxiliary condensate pan overflow safety switch. • Discharge air grilles: ◊ Aluminum single deflection, left/right or front/back ◊ Deluxe aluminum single deflection grilles (Contact Titus for availability). ◊ Linear bar aluminum grilles (Contact Titus for availability). ◊ Special discharge air grille colors (Contact Titus for color selection and price). • Special cabinet paints (Contact Titus for special colors availability and prices). • Heavy duty access panel in 16GA painted steel. • Return air/access panel fasteners: ◊ Philips head screws. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners. ◊ Access doors keyed locks.

www.titus-hvac.com | www.titus-energysolutions.com

VBA

A Participating Corporation in the AHRI 440 Certification Program

V53


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS VBA ANGLED TOP CABINET

TOP VIEW

3

1

2

FRONT VIEW

4

SIDE VIEW

5

10 7/8"

V

10

6

24 15/16"

8

26 13/16"

7

2" 1/2"

3" D

9

C B

2"

2"

A

Note: Right Hand Unit Shown

1. 2. 3. 4.

Control Box Stamped Supply Air Grille Control Access Door Coil

5. 6. 7. 8.

Coil Connections (2-Pipe Shown) Motor/Blower(s) Assemby Condensate Connection ⅞” O.D. Filter

A 34¼ 37¼ 41¼ 52¼ 60¼ 70¼ 80¼

Dimensions (inches) C D 12 11⅛ 12 12⅝ 12 14⅝ 24 14⅛ 24 18⅛ 36 17⅛ 36 22⅛

DIMENSIONS

Model

V54

VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

B 18 21 25 36 44 54 64

9. Fresh Air Damper Opening (optional) = 2” x “C” 10. Electric Heaters (optional)

Approx. Weight (pounds) Filter 17x10x1 95 20x10x1 104 24x10x1 106 35x10x1 128 43x10x1 146 (2)26x10x1 178 (2)31x10x1 186

All dimensions are in inches.


Fan Coils

PERFORMANCE DATA

Model VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

Model VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

Model VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

Model

Total MBH 5.8 7.9 11.0 15.8 20.3 24.5 30.7

2-PIPE SYSTEM 3 Rows Cooling 3 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.3 1.2 0.96 17.5 1.2 0.79 5.9 1.6 1.95 23.1 1.6 1.51 8.0 2.2 4.14 31.2 2.1 3.03 11.9 3.2 2.15 46.9 3.2 1.88 14.8 4.1 3.89 57.5 3.9 3.14 18.2 4.9 2.92 71.6 4.9 2.64 22.3 6.1 4.88 86.8 5.9 4.16

Total MBH 7.0 9.5 11.5 19.2 24.2 29.6 36.6

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 4.9 1.4 1.86 19.5 1.3 1.30 6.6 1.9 3.70 25.8 1.8 2.48 8.4 2.3 1.16 34.0 2.3 1.01 13.4 3.8 3.84 52.5 3.6 2.87 16.6 4.8 6.79 64.0 4.4 4.75 20.5 5.9 4.91 79.8 5.4 3.83 25.1 7.3 8.13 96.5 6.6 6.03

Total MBH 7.7 10.4 13.0 21.1 26.4 32.4 39.8

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 5.2 1.5 2.79 20.0 1.4 1.73 7.0 2.1 5.51 26.7 1.8 3.31 9.0 2.6 1.71 35.0 2.4 1.29 14.1 4.2 5.47 54.4 3.7 3.63 17.4 5.3 9.56 66.1 4.5 6.00 21.5 6.5 6.73 82.5 5.6 4.67 26.3 7.9 11.02 99.7 6.8 7.36

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

Model VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

Model VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

Total MBH 3.8 5.3 7.5 10.5 13.7 18.3 20.8

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 3.2 0.8 0.29 8.6 4.3 1.1 0.61 11.1 5.9 1.5 1.33 14.7 8.7 2.1 0.74 22.4 11.0 2.7 1.39 27.3 14.1 3.6 2.71 34.2 16.5 4.2 1.87 41.1

Heating Flow PD gpm ft wg 0.6 0.49 0.8 0.90 1.0 1.76 1.5 5.24 1.9 9.08 2.3 16.70 2.8 27.52

Total MBH 5.5 7.5 10.5 15.1 19.4 23.4 29.3

4-PIPE SYSTEM 3 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 4.1 1.1 0.89 8.2 5.6 1.5 1.78 10.6 7.6 2.1 3.79 14.0 11.2 3.0 1.97 21.3 14.0 3.9 3.57 26.1 17.2 4.7 2.67 32.7 21.1 5.9 4.47 39.4

Heating Flow PD gpm ft wg 0.6 0.46 0.7 0.85 1.0 1.66 1.5 4.91 1.8 8.49 2.2 15.54 2.7 25.60

Total MBH 6.7 9.0 10.9 18.2 22.9 27.9 34.6

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 4.6 1.3 1.68 7.8 6.2 1.8 3.34 10.1 7.9 2.2 1.04 13.4 12.6 3.6 3.46 20.4 15.6 4.6 6.12 24.9 19.3 5.6 4.41 31.2 23.6 6.9 7.30 37.6

Heating Flow PD gpm ft wg 0.5 0.43 0.7 0.80 0.9 1.53 1.4 4.57 1.7 7.88 2.1 14.38 2.6 23.69

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.

V

PERFORMANCE DATA

VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

2-PIPE SYSTEM 2 Rows Cooling (1) 2 Rows Heating (1) Total Sensible Flow PD Sensible Flow PD MBH MBH gpm ft wg MBH gpm ft wg 4.0 3.4 0.8 0.31 13.4 0.9 0.32 5.5 4.5 1.1 0.65 17.8 1.2 0.61 7.8 6.2 1.6 1.43 23.9 1.6 1.22 11.0 9.1 2.2 0.80 35.9 2.4 0.87 14.4 11.5 2.9 1.52 44.3 3.0 1.45 19.1 14.8 3.8 2.94 56.2 3.8 2.58 21.8 17.3 4.3 2.04 66.9 4.6 2.05

www.titus-hvac.com | www.titus-energysolutions.com

VBA ANGLED TOP CABINET

V55


www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA Nominal Air Volumes cfm (1) Model High Med Low VBA02 235 209 182 VBA03 316 262 203 VBA04 433 310 225 VBA06 653 471 321 VBA08 781 615 449 VBA10 979 861 567 VBA12 1177 931 642

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

Model

V

VBA02 VBA03 VBA04 VBA06 VBA08 VBA10 VBA12

Motor Total HP AMPS 1/30 0.5 1/30 0.5 1/20 0.8 1/20 0.8 1/20 0.8 1/20 0.8 1/20 0.8

PERFORMANCE DATA

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

V56

Fan Coils


Vertical Basic Series (continued)

Fan Coils

The low silhouette styling of this cabinet unit makes it ideal for applications in public buildings, hotels, schools, hospitals and general commercial applications where the unit height is restricted. VBL

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All internal sheet metal components are fabricated of 18GA G90 galvanized steel and exposed metal casing panels fabricated of 18GA galvanealed for superior adhesion of the powder paint. • Cabinet components are painted with a powder polyester baked coating in white or beige and are acoustically insulated to reduce noise dissipation from the unit. • Cabinet liner in ½-inch dual-density fiberglass. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-Inch thick disposable filter. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally insulated on the outside (Consult Titus for availability). • Single wall auxiliary condensate pan thermally insulated on the outside. • Flat stamped discharge top/grille. • Electric controls and valve package access door.

OPTIONAL FEATURES INCLUDE

• 3-, and 4-row coils for 2-pipe systems. • Single block 2 and 3 row CW with 1 row re-heat or preheat coils for 4-pipe system applications (4 rows max). • Single block 2 row CW with 2 rows re-heat or preheat for 4-pipe system applications (4 rows max). • LH or RH pipe connections entry. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters.

• Cabinet liner in ½-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supplies disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Single wall auxiliary condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Auxiliary condensate pan overflow safety switch. • Special Cabinet paints (Contact Titus for special colors availability and prices). • Heavy duty access panel in 16GA painted steel. • Return air/access panel fasteners: ◊ Philips head screws. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners. ◊ Access doors keyed locks.

www.titus-hvac.com | www.titus-energysolutions.com

VBL

V

VBL

A Participating Corporation in the AHRI 440 Certification Program

V57


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS VBL LOW PROFILE CABINET TOP VIEW A

1

3

SIDE VIEW 2

12 7/8"

FRONT VIEW

4

V

Ø'C'

5

1578

6 VBL

7 8 8

B A

9

1 7/8"

Note: Right Hand Unit Shown

1. 2. 3. 4.

Control Access Door Control Box Stamped Supply Air Grille Coil

5. 6. 7. 8.

Coil Connections (2-Pipe Shown) Motor/Blower(s) Assemby Condensate Connection ⅞” O.D. Filter

DIMENSIONS

Model

V58

VBL02 VBL03 VBL04 VBL06

A 37⅛ 41⅛ 52⅛ 60⅛

Dimensions (inches) B C 21⅛ ⅝ 25⅛ ⅝ 36⅛ ⅝ 44⅛ ⅝

9. Stamped Return Air Grille

Approx. Weight Filter 21x10x1 25x10x1 36x10x1 44x10x1

All dimensions are in inches.

(pounds) 90 95 100 120


Fan Coils

PERFORMANCE DATA

2-PIPE SYSTEM 2 Rows Cooling (1) Model

Total MBH

Sensible Flow

4-PIPE SYSTEM 2 Rows Heating (1)

PD

Sensible

Flow

PD

MBH

gpm

ft wg

MBH

gpm

ft wg

2 Rows Cooling Model

Total

Sensible Flow

1 Row Heating PD

Sensible

Flow

PD

MBH

MBH

gpm

ft wg

MBH

gpm

ft wg

VBL02

4.8

4.1

0.9

0.43

16.5

1.1

0.46

VBL02

4.6

3.9

0.9

0.40

11.1

0.8

0.79

VBL03

7.0

5.9

1.4

1.03

23.4

1.6

1.02

VBL03

6.8

5.6

1.4

0.96

15.4

1.0

1.67

VBL04

11.5

9.0

2.3

3.54

34.6

2.4

2.87

VBL04

11.1

8.5

2.2

3.27

22.3

1.5

4.57

VBL06

14.1

12.0

2.8

1.34

47.4

3.2

1.51

VBL06

13.6

11.4

2.7

1.25

31.0

2.1

10.00

2-PIPE SYSTEM 3 Rows Cooling Model VBL02

Total

Sensible Flow

4-PIPE SYSTEM 3 Rows Heating

3 Rows Cooling

PD

Sensible

Flow

PD

Model

MBH

MBH

gpm

ft wg

MBH

gpm

ft wg

6.7

5.0

1.3

1.24

20.8

1.4

1.08

VBL02

Total

Sensible Flow

1 Row Heating PD

Sensible

Flow

PD

MBH

MBH

gpm

ft wg

MBH

gpm

ft wg

6.4

4.7

1.3

1.13

10.6

0.7

0.74 1.56

VBL03

9.8

7.3

2.0

2.91

29.7

2.0

2.42

VBL03

9.3

6.9

1.9

2.64

14.7

1.0

VBL04

15.3

10.9

3.1

9.05

43.3

3.0

6.61

VBL04

14.5

10.3

2.9

8.23

21.3

1.5

4.25

VBL06

19.7

14.8

3.9

3.35

60.4

4.1

3.12

VBL06

18.8

14.0

3.8

3.05

29.7

2.0

9.38

2-PIPE SYSTEM 4 Rows Cooling Model

Total

Sensible Flow

4 Rows Heating PD

Sensible

Flow

PD

MBH

MBH

gpm

ft wg

MBH

gpm

ft wg

VBL02

7.8

5.4

1.6

2.23

22.4

1.5

1.66

VBL03

11.4

8.0

2.3

5.20

32.2

2.2

3.76

VBL04

15.7

11.0

3.1

2.35

45.4

3.1

1.96

VBL06

23.1

16.2

4.6

5.61

65.6

4.5

4.48

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model VBL02 VBL03 VBL04 VBL06

Motor Total HP AMPS 1/30 0.50 1/30 0.50 1/20 0.8 1/20 0.8

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

V

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.

PERFORMANCE DATA

Nominal Air Volumes cfm (1) Model High Med Low VBL02 241 171 123 VBL03 353 235 182 VBL04 492 364 268 VBL06 728 567 396

www.titus-hvac.com | www.titus-energysolutions.com

VBL LOW PROFILE CABINET

V59


V

Fan Coils

VBLC The low silhouette, vertical discharge, floor mounted unit is designed for concealed applications inside a closet or furred-in under window installations for applications in public buildings, hotels, schools, hospitals and general commercial applications where the unit height is restricted.

VBLC

www.titus-hvac.com | www.titus-energysolutions.com

Vertical Basic Series (continued)

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All sheet metal components are fabricated of 18GA G90 galvanized steel. • Cabinet liner in ½-inch dual-density fiberglass. • High-efficiency 2-row coil suitable for a 2-pipe system. • Coil manual air vent. • Easily removal 1-inch thick disposable filter. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally insulated on the outside (Consult Titus for availability). • Single wall auxiliary condensate pan thermally insulated on the outside. • ½-Inch top discharge air flange.

OPTIONAL FEATURES INCLUDE

VBLC

• 3- And 4-row coils for 2-pipe systems. • Single block 2 and 3 rows CW with 1 row re-heat or preheat coils for 4-pipe system applications (4 rows max). • Single block 2 rows CW with 2 rows re-heat or preheat for 4-pipe system applications (4 rows max). • LH or RH pipe connections entry • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Cabinet liner in ½-inch foil face. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect.

• Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supplies disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Fresh air opening. • Fresh air with manual or auto dampers. • Fresh air freeze protection. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Single wall auxiliary condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Auxiliary condensate pan overflow safety switch. • Remote discharge air grilles: ◊ Stamped with access doors ◊ Aluminum double deflection ◊ Deluxe aluminum double deflection grilles (Contact Titus for availability). ◊ Linear bar aluminum grille (Contact Titus for availability). ◊ Special discharge air grille colors (Contact Titus for color range availability and price). ◊ Remote stamped return air/access panel with filter access door.

V60

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

VBLC LOW PROFILE CONCEALED FLOOR

TOP VIEW A 6 5/8"

1

C

2"

6

1 8

1 1/2"

3 5 8

4"

RIGHT HAND UNIT SHOWN

1

RIGHT VIEW

FRONT VIEW

1

B 7 1 8

2 10

1 4

4 15 7/8"

5

10 3/4" 10

10

1. 2. 3. 4.

1/2" REF.

3 8

12

12 5/8" 1"

Supply Duct Collar Coil Coil Connections (2-Pipe Shown) Motor/Blower(s) Assemby

5. 6. 7. 8.

12 1/8"

B 231/9 271/9 381/9 461/9

4"

5 1/4"

9. Sub-base (optional) 10. Filter Clips

Approx. Weight Opt. Cover 37⅛ x 155/7 x 41⅛ x 155/7 x 52⅛ x 155/7 x 60⅛ x 155/7 x

All dimensions are in inches.

½ ½ ½ ½

(pounds) 90 95 100 120

DIMENSIONS

A 34⅞ 38⅞ 49⅞ 57⅞

Dimensions (inches) C Filter 18 21x10x1 22 25x10x1 33 36x10x1 44 44x10x1

5/8"

9

6 1/8"

Auxillary Condensate Tray Condensate Connection ⅞” O.D. Filter Control Box

Model VBLC02 VBLC03 VBLC04 VBLC06

7

6

V

V61


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

V

VBLC LOW PROFILE CONCEALED FLOOR 2-PIPE SYSTEM 2 Rows Cooling (1) Model

Total MBH

Sensible Flow

4-PIPE SYSTEM 2 Rows Heating (1)

PD

Sensible

Flow

PD

MBH

gpm

ft wg

MBH

gpm

ft wg

1 Row Heating PD

Sensible

Flow

PD

MBH

MBH

gpm

ft wg

MBH

gpm

ft wg

4.8

4.1

0.9

0.43

16.5

1.1

0.46

VBLC02

4.6

3.9

0.9

0.40

11.1

0.8

0.79

VBLC03

7.0

5.9

1.4

1.03

23.4

1.6

1.02

VBLC03

6.8

5.6

1.4

0.96

15.4

1.0

1.67

VBLC04

11.5

9.0

2.3

3.54

34.6

2.4

2.87

VBLC04

11.1

8.5

2.2

3.27

22.3

1.5

4.57

VBLC06

14.1

12.0

2.8

1.34

47.4

3.2

1.51

VBLC06

13.6

11.4

2.7

1.25

31.0

2.1

10.00

2-PIPE SYSTEM 3 Rows Cooling Model

Total

Sensible Flow

4-PIPE SYSTEM 3 Rows Heating

3 Rows Cooling

PD

Sensible

Flow

PD

Model

Total Sensible Flow

1 Row Heating PD

Sensible

Flow

PD ft wg

MBH

MBH

gpm

ft wg

MBH

gpm

ft wg

MBH

MBH

gpm

ft wg

MBH

gpm

VBLC02

6.7

5.0

1.3

1.24

20.8

1.4

1.08

VBLC02

6.4

4.7

1.3

1.13

10.6

0.7

0.74

VBLC03

9.8

7.3

2.0

2.91

29.7

2.0

2.42

VBLC03

9.3

6.9

1.9

2.64

14.7

1.0

1.56

VBLC04

15.3

10.9

3.1

9.05

43.3

3.0

6.61

VBLC04

14.5

10.3

2.9

8.23

21.3

1.5

4.25

VBLC06

19.7

14.8

3.9

3.35

60.4

4.1

3.12

VBLC06

18.8

14.0

3.8

3.05

29.7

2.0

9.38

2-PIPE SYSTEM 4 Rows Cooling Total

Sensible Flow

4 Rows Heating PD

Sensible

Flow

PD

MBH

MBH

gpm

ft wg

MBH

gpm

ft wg

VBLC02

7.8

5.4

1.6

2.23

22.4

1.5

1.66

VBLC03

11.4

8.0

2.3

5.20

32.2

2.2

3.76

VBLC04

15.7

11.0

3.1

2.35

45.4

3.1

1.96

VBLC06

23.1

16.2

4.6

5.61

65.6

4.5

4.48

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

PERFORMANCE DATA

Total Sensible Flow

VBLC02

Model

V62

2 Rows Cooling Model

Nominal Air Volumes cfm (1) Model High Med Low VBLC02 241 171 123 VBLC03 353 235 182 VBLC04 492 364 268 VBLC06 728 567 396

Model VBLC02 VBLC03 VBLC04 VBLC06

Motor Total HP AMPS 1/30 0.50 1/30 0.50 1/20 0.8 1/20 0.8

1. Nominal air volume ratings are based on a 2-row coil at sea level altitude with 0 external static pressure.

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


SUGGESTED SPECIFICATIONS

Fan Coils 11. Motors shall be multi-speed of the permanent split capacitor type (PSC) and be directly coupled to the centrifugal fan blower. Motor shall be suitable for a power supply of 115V/1Ph/60Hz and shall be internally protected with an automatic thermal overload. Motor shaft shall be supported by sleeve bearings of the permanently lubricated type for the full life expectancy of the motor. All motors shall be directly mounted to the fan deck and be isolated from the unit casing by two resilient anti-vibration mounts. 12. Direct-driven fan shall be of the whisper quite type, Double Width Double Inlet (DWDI) forward curved statically and dynamically balanced at the factory. The fan wheel and casing shall be constructed of galvanized steel. 13. Electric components shall be wired to a single control panel for single point power supply. Wiring exposed to the outside of the units shall be installed in conduits to meet UL 1995 safety requirements. 14. Condensate pans shall be single wall 18-gauge G90 galvanized steel-welded at the corners, thermally protected on the outside with fire and smoke rated ¼-inch high-density insulation to prevent condensation. The factory installed ⅞-inch OD sweat copper condensate connection shall be located at the lowest point of the condensate pan to ensure all water drains from the condensate pan (Consult Titus for availability). 15. Auxiliary condensate pan shall be removable, single wall, 18-gauge G90 galvanized steel, thermally protected on the outside with fire and smoke rated ¼-inch high-density insulation to prevent condensation. The factory installed ⅞-inch OD sweat copper condensate field connection shall be located at the lowest point of the auxiliary condensate pan to ensure that all water is drained from the condensate pan. 16. Discharge air flange (VBC and VBLC units only) shall be ½-inch to facilitate the field connection of ducts. 17. Discharge air grille (VBA, VBF and VBL) shall be of the stamped louvered type and be an integral part of the cabinet assembly. 18. Access doors shall be provided for access to the electric controls and valve package.

V

SPECIFICATIONS

1. Furnish and install Titus models VBC, VBA, VBF and low profile VBL, VBLC vertical basic fan coils of sizes and capacities shown on the plans to meet prevailing cooling and heating requirements. 2. Fan coils shall be performance certified to AHRI Standard 440. Units shall be wired in compliance with ANSI/UL 1995 Standard and listed with ETL. 3. Fan coils shall be sound tested in accordance with AHRI Standard 260 for ducted units and AHRI Standard 350 for non-ducted units. Manufacturer shall provide these dB ratings on request for each model specified. 4. Unit casing shall be 18-gauge, zinc coated, phosphate treated, galvanized steel. Painted sheet metal components (VBA, VBF and VBLC units only) components shall be 18-gauge galvanealed sheet metal. 5. Painted panels (VBA, VBF and VBLC units only) shall be painted with a polyester powder coating, electrostatically applied, oven baked to 400°F for 10 minutes in beige or white tones. 6. High-efficiency, 2-row coil shall be suitable for a 2-pipe system. Coils shall be manufactured with aluminum fins mechanically bonded to seamless copper tubes. The copper tubes shall be ⅜-inch OD with a wall thickness of 0.014-inch which comply with ASTM B-75. The fins shall be waved with ripple edges for superior efficiency with a thickness of 0.0045-inch and spaced at 10 fpi. Coils rated to 300 psi operational pressure. All coils shall be shipped with a safety air pressure of 30 - 50 psi to guarantee a leak free arrival at the final destination. 7. Unit pipe entry location shall be in accordance with the project schedule. 8. Coils shall be installed with manual Schrader type air vents with a sealing cap and be located at the highest point of the coil. The cap shall have a dual purpose, to seal any potential water leakage in the eventuality of Schrader valve failure and as a service tool for the extraction/insertion of the internal Schrader valve. 9. Standard filters shall be 1-inch nominal thickness of the disposable type with a one-piece moisture resistant chipboard frame to eliminate corner separations. The spun glass filtering media shall be bonded with a resinous agent providing rigidity and resistance to media compression and meets UL class 2. 10. Cabinets shall be lined with ½-inch dual-density fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances), NFPA 255, UL 181, UL723 and ASTM E84.

www.titus-hvac.com | www.titus-energysolutions.com

FAN COILS Vertical Basic Units Standard Configurations

V63


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

V

FAN COILS Vertical Basic Units Optional Configurations

COOLING AND HEATING COIL

1. High-efficiency 3-, 4- and 5-row coils suitable for 2-pipe systems (VBC, VBA and VBF 5-row maximum). 2. High-efficiency single block with 2, 3 and 4-rows chilled water (CW) with 1-row re-heat/pre-heat coil suitable for 4-pipe system applications, or 3. High-efficiency single block with 2, 3 rows chilled water (CW) with 2-row re-heat/pre-heat coil suitable for 4-pipe system applications.

FILTER

1. Filter shall be 1-inch pleated filter with an average atmospheric dust spot efficiency range of 20 - 30% per ASHRAE Standard 52.1 test method, or 2. Filter shall be 1-inch washable filter consisting of synthetic fibers coated with a special resin, then baked together at a high temperature resulting in a tough and springy, thoroughly bonded, nearly rigid air filtration media. Washable filters shall have a longer service life, better structural integrity as well as being completely odor free. 3. A spare set of filters shall be available for replacement after the commissioning of the unit and prior to the handover of the project.

MOTOR AND MOTOR ACCESSORIES

1. Motors shall be suitable for 115V/1Ph/60Hz or 208V/1Ph/60Hz or 230V/1Ph/60Hz or 277V/1Ph/60Hz power supplies (delete as applicable). 2. A motor in-line quick disconnect shall be installed to facilitate the removal/replacement of motor.

THERMOSTAT AND ACCESSORIES

Refer to Accessories on page V86.

DISCONNECT SWITCH AND FUSES

Units shall be wired for single point power supply with a disconnect switch and fuse(s) to match the unit full maximum circuit ampacity (MCA) in line with UL 1995. 2-Pipe Heat/Cool Auto

SPECIFICATIONS

CHANGEOVER SWITCH

V64

A mechanical changeover switch shall be supplied on 2-pipe systems to automatically change over the thermostat operation for summer and winter modes.

ELECTRIC HEATER AND ACCESSORIES

1. Electric heaters shall be of the wound type mounted in a metal frame and supported by ceramic rings and terminals. Electric heaters shall be installed on the blower discharge side for better heat dissipation and shall include an automatic reset, high limit cut-out and contactor.

2. 2-pipe standby electric heating heaters shall be installed and pre-wired as standby heating for the eventuality of a failure of the primary hot water (HW) system. A changeover sensor shall be installed in each unit and the changeover between the failed hot water system and the standby electric heater shall be automatic.

CHILLED AND HOT WATER VALVE CONTROLS

Refer to Accessories on page V86.

CONDENSATE PAN AND ACCESSORIES

1. Condensate pan shall be single wall manufactured in 20-gauge 304 stainless steel and shall be thermally protected on the outside with fire and smoke rated ¼-inch high-density insulation to prevent condensation. The factory installed ⅞-inch OD sweat copper condensate connection shall be located at the lowest point of the condensate pan to ensure that all water is drained from the condensate pan (Consult Titus for availability), or 2. Condensate pan shall be double wall construction consisting of an outer and inner skin. The outer skin shall be manufactured of 18-gauge G90 galvanized sheet metal wrapped around the inner skin with 1-inch thermal insulation between both skins to prevent condensation. The inner skin of the double wall condensate pan shall be of 18-gague G90 galvanized sheet metal, or 3. Condensate pan shall be double wall construction consisting of an outer and inner skin. The outer skin shall be manufactured of 18-gauge G90 galvanized sheet metal wrapped around the inner skin with 1-inch thermal insulation between both skins to prevent the formation of condensation. The inner skin of the double wall condensate pan shall be of 20-gauge 304 stainless steel galvanized sheet metal. 4. A mastic coating shall be applied to the inside of the condensate pan for a prolonged life.

AUXILIARY CONDENSATE PAN AND ACCESSORIES

1. Auxiliary condensate pan shall be removable, single wall 20-gauge 304 stainless steel, thermally protected on the outside with fire and smoke rated ¼-inch highdensity insulation to prevent condensation. The factory installed ⅞-inch OD sweat copper condensate field connection shall be located at the lowest point of the auxiliary condensate pan to ensure that all water is drained from the condensate pan. 2. An automatic safety overflow switch shall be located in the auxiliary condensate pan and be interconnected to the unit electric system preventing the unit operation if an overflow status is detected.


Fan Coils

SUGGESTED SPECIFICATIONS

Vertical Basic Units Optional Configurations (continued)

DISCHARGE AIR GRILLES AND ACCESSORIES

• Unit mounted (VBA and VBF units only) discharge air grille shall be double-deflection, made of aluminum and painted white for white painted cabinet units or aluminum for beige painted cabinets, or • Unit mounted (VBA and VBF units only) deluxe discharge air grille shall be double-deflection, made of aluminum and painted white for white painted cabinet units or aluminum for beige painted cabinets, or • Unit mounted (VBA and VBF units only) fixed linear discharge air grille shall be made of aluminum and painted white for white painted cabinet units or aluminum for beige painted cabinets, or • Remote mounted (VBC and VBLC) stamped grille with access doors painted white or beige, or • Remote mounted (VBC and VBLC) grille assembly with access doors painted white or beige and a deluxe aluminum grille core, or Remote mounted (VBC and VBLC) grille assembly with access doors painted white or beige and a linear aluminum grille core, or • Special discharge air grilles colors shall be______________. (Contact Titus for color range availability and price).

CABINET AND ACCESSORIES

1. Special cabinet color shall be______________. (Contact Titus for color range availability and price). 2. Access panel (VBA, VBF and VBC units) shall be manufactured in heavy duty 16GA steel. 3. Remote access/return grille panel (VBC and VBLC) shall be stamped with a hinged door for easy access to the filters and painted white or beige. 4. Access panel security fasteners (VBA, VBF and VBC units) shall be tamperproof, requiring a specialist tool to access the units, or 5. Access panel security fasteners (VBA, VBF and VBC units) shall be of the quarter turn type, to facilitate the removal of the access panel. 6. Four adjustable leveling feet shall be installed to ensure that the unit is correctly level and prevent condensate water leaks. 7. Access doors shall be fitted with keyed locks.

www.titus-hvac.com | www.titus-energysolutions.com

FAN COILS

V

SPECIFICATIONS V65


Fan Coils

Factory assembled, horizontal blow-thru, high-output, ducted fan coils are designed for concealed installations above ceilings with ducted air discharge and suitable for projects such as hotels, motels, condominiums and general commercial applications.

HHC

www.titus-hvac.com | www.titus-energysolutions.com

V

Horizontal High Output Series HHC

STANDARD FEATURES INCLUDE:

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All casing sheet metal components fabricated of 18GA G90 galvanized steel. • High-efficiency 3-row coil suitable for a 2-pipe system. • Coil manual air vent. • Multi-speed motor(s) of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blower(s) of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside (Contact Titus for availability). • 1-inch discharge air flange.

OPTIONAL FEATURES INCLUDE

HHC

• 4-, 5- And 6-row coils for 2-pipe systems. • Single block 2, 3, 4 and 5 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (6 rows max). • Single block 2, 3, and 4 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (6 rows max).

• LH or RH pipe connections entry. • Motor voltage suitable for 208V, 230V or 277V1Ph/60Hz power supplies. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supplies disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW Standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner shins. ◊ Condensate pan overflow safety switch. ◊ Condensate pan satety overflow connection.

V66

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

HHC CONCEALED CEILING

1

TOP VIEW

1

8

Ø7/8 -INCH TYP

6

2

3

9 11 1/2

4

5 3/4

5

3 3/8

7

C 1

B B+2 A

V

SIDE VIEW

1 1/2

FRONT VIEW

28

15 1/2 16 1/2

11 3/4

1 1/4

Note: Right Hand Unit Shown

Ø'D'

1. Motor/Blower(s) Assemblies 2. Condensate Tray (Double Wall) 3. Condensate Connection 3/4” MNPT

4. Coil Connections (2-Pipe Shown) 5. Installation Hanging Points 6. Coil

Model A 25½ 30½ 33½ 38½ 42½ 46½ 51½ 55½

Approx. Weight D ⅝ ⅝ ⅞ ⅞ ⅞ ⅞ ⅞ ⅞

All dimensions are in inches.

(pounds) 60 69 75 99 108 115 125 175

DIMENSIONS

HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

Dimensions (inches) B C 18 13 23 18 26 21 31 26 35 30 39 34 44 39 48 43

7. Supply Air Flange 8. Electirc Heaters (optional)

V67


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA HHC CONCEALED CEILING

Model HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

Model

V

HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

Model

PERFORMANCE DATA

HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

V68

Model HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

Total MBH 17.0 24.1 28.4 29.7 39.1 45.2 51.6 53.8

2-PIPE SYSTEM 3 Rows Cooling (1) 3 Rows Sensible Flow PD Sensible MBH gpm ft wg MBH 14.9 3.4 3.41 56.6 20.0 4.8 7.45 75.7 22.8 5.7 10.85 86.4 25.1 5.9 2.46 97.9 33.3 7.8 4.35 127.0 37.7 9.0 6.07 143.4 41.7 10.3 8.34 158.3 45.6 10.7 4.08 175.3

Heating Flow gpm 3.9 5.2 5.9 6.7 8.7 9.8 10.8 12.0

(1) PD ft wg 3.30 6.50 8.97 2.50 4.31 5.76 7.45 4.25

Total MBH 21.8 26.1 30.7 38.0 49.9 52.6 59.5 68.5

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 17.4 4.3 7.06 67.1 4.6 5.97 21.6 5.2 2.06 85.4 5.8 2.06 24.6 6.1 2.97 97.5 6.7 2.81 29.2 7.6 4.86 114.1 7.8 4.17 38.9 10.0 8.58 149.6 10.2 7.33 42.2 10.5 4.23 164.9 11.3 4.11 46.4 11.9 5.68 181.1 12.4 5.22 53.2 13.7 7.71 205.7 14.0 6.93

Total MBH 21.6 30.7 35.8 43.3 53.4 61.2 68.6 74.9

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 17.5 4.3 1.54 70.2 4.8 1.51 23.5 6.1 3.34 92.9 6.3 2.89 26.7 7.1 4.74 105.5 7.2 3.91 31.3 8.7 7.46 122.5 8.4 5.72 40.6 10.7 4.78 159.2 10.9 4.24 45.8 12.2 6.52 179.0 12.2 5.59 50.2 13.7 8.63 195.5 13.3 7.04 56.0 15.0 6.22 219.6 15.0 5.59

Total MBH 24.3 34.0 39.3 44.1 59.3 67.6 71.6 82.3

2-PIPE SYSTEM 6 Rows Cooling 6 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 18.5 4.9 2.23 74.0 5.1 1.95 24.6 6.8 4.70 97.2 6.6 3.66 27.9 7.9 6.57 109.7 7.5 4.91 31.4 8.8 3.60 124.7 8.5 2.90 42.6 11.8 6.61 166.7 11.4 5.26 48.0 13.5 8.94 186.9 12.8 6.90 51.0 14.3 6.11 200.8 13.7 5.07 58.5 16.4 8.25 228.9 15.6 6.75

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

Model HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

Model HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

Model HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

4-PIPE SYSTEM 2 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 10.8 10.7 2.2 1.02 21.5 15.8 14.5 3.2 2.36 29.8 18.8 16.6 3.7 3.47 34.4 23.3 19.8 4.7 5.80 41.1 25.4 24.2 5.1 1.44 52.3 29.5 27.4 5.9 2.03 56.1 33.9 30.3 6.8 2.82 63.0 39.1 34.7 7.8 3.86 71.3

Heating Flow PD gpm ft wg 1.5 1.34 2.0 2.81 2.3 3.96 2.8 6.19 3.6 10.33 3.8 1.97 4.3 2.67 4.9 3.57

4-PIPE SYSTEM 3 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 16.4 14.3 3.3 3.22 20.9 23.4 19.1 4.7 7.06 29.0 27.5 21.8 5.5 10.25 33.4 28.7 24.0 5.7 2.32 39.9 37.9 31.9 7.6 4.11 50.8 43.8 36.1 8.7 5.74 54.5 49.9 39.9 10.0 7.86 61.2 52.1 43.7 10.4 3.84 69.3

Heating Flow PD gpm ft wg 1.4 1.30 2.0 2.73 2.3 3.83 2.7 5.92 3.5 9.96 3.7 2.06 4.2 2.77 4.7 3.60

4-PIPE SYSTEM 4 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 20.9 16.6 4.2 6.59 20.3 25.1 20.5 5.0 1.92 28.1 29.4 23.4 5.9 2.75 32.4 36.2 27.6 7.2 4.47 38.6 47.9 37.0 9.6 8.00 49.2 50.4 40.1 10.1 3.92 52.9 56.9 44.0 11.4 5.22 59.3 66.0 50.6 13.2 7.21 67.1

Heating Flow PD gpm ft wg 1.4 1.27 1.9 2.60 2.2 3.65 2.6 5.68 3.4 9.58 3.6 2.07 4.0 2.77 4.6 3.71

4-PIPE SYSTEM 5 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 20.8 16.7 4.1 1.44 19.8 29.5 22.4 5.9 3.11 27.3 34.6 25.5 6.9 4.45 31.4 41.7 29.9 8.3 6.96 37.4 51.4 38.7 10.3 4.46 47.8 58.9 43.6 11.8 6.08 51.4 66.4 48.0 13.3 8.12 57.6 72.4 53.5 14.4 5.83 65.2

Heating Flow PD gpm ft wg 1.4 1.21 1.9 2.52 2.1 3.53 2.6 5.47 3.3 9.17 3.5 2.14 3.9 2.85 4.4 3.70

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


Fan Coils

PERFORMANCE DATA

HHC06 HHC08 HHC10 HHC12 HHC14 HHC16 HHC18 HHC20

Motor Total HP AMPS 1/4 3.60 1/4 4.30 1/4 4.30 1/3 5.10 2 x 1/4 2 x 4.20 2 x 1/4 2 x 4.20 2 x 1/4 2 x 4.50 2 x 1/3 2 x 4.50

Nominal Air Volumes cfm (1) Model High Med Low HHC06 992 671 548 HHC08 1243 733 593 HHC10 1366 989 754 HHC12 1528 1102 839 HHC14 2138 1264 1048 HHC16 2365 1434 1173 HHC18 2503 2013 1419 HHC20 2877 2306 1792

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

1. Nominal air volume ratings are based on a 3-row coil at sea level altitude with 0 external static pressure. 2. Air volumes are based at high fan speed.

www.titus-hvac.com | www.titus-energysolutions.com

Model

V

PERFORMANCE DATA V69


V

Fan Coils

HHP Factory assembled, horizontal blow-thru, ducted high-output HHP fan coils designed for concealed installations above ceilings with ducted return and discharge air and suitable for projects such as hotels, motels, condominiums and general commercial applications.

HHP

www.titus-hvac.com | www.titus-energysolutions.com

Horizontal High Output Series (continued)

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • Casing sheet metal components fabricated of 18GA G90 galvanized steel. • Return air plenum thermally and acoustically insulated covering the motor(s)/blower(s) assembly to reduce noise dissipation from the unit. • High-efficiency 3-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-Inch thick disposable filter. • Filter removal from LH or RH sides. • Multi-speed motor(s) of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blower(s) of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside (Consult Titus for availability). • 1-inch discharge air flange. • 1-Inch return air return air flange. • Anti-vibration mounts for field installation.

OPTIONAL FEATURES INCLUDE

• Bottom or rear return air and filter location. • Filter supports with slides or clips. • Vertical removal of filter on return air installations. • Cabinet liner in ½-inch foil face. • Motor(s) voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect(s) (Rear return air option only). • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supplies disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch.

HHP

• 4-, 5- And 6-row coils for 2-pipe systems. • Single block 2, 3, 4 and 5 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (5 rows max). • Single block 2, 3 and 4 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (5 rows max). • LH or RH entry pipe connections. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters.

V70

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

HHP CONCEALED CEILING WITH PLENUM TOP VIEW

B

1

1

3

2

10

10

14 11

4 6

5

11 1/2

9 5 3/4 1 5/8

7 316

8

1

9

C B B+2 A

7

1 7/16

SIDE VIEW

1

28 1/2

FRONT VIEW

1

V

15 11 7/8

15

1 3/8

1 Ø'D'

Note: Right Hand Rear Return Unit Shown

1. 2. 3. 4.

Return Air Flange Filter Bottom Return (Optional) Motor/Blower(s) Assemby Condensate Tray (Double Wall optional)

5. 6. 7. 8. 9.

Condensate Connection 3/4” MNPT Coil Connections (2-Pipe Shown) Hanging Points Coil Supply Air Flange

Model A 25½ 30½ 33½ 38½ 42½ 46½ 51½ 55½

B 18 23 26 31 35 39 44 48

Dimensions (inches) C 13 18 21 26 30 34 39 43

10. Electric Control Panel - Note: Control box may be mounted on either side. 11. Electric Heaters (optional)

Approx. Weight D ⅝ ⅝ ⅞ ⅞ ⅞ ⅞ ⅞ ⅞

(pounds) Filter 20x17x1 81 25x17x1 94 28x17x1 106 33x17x1 117 37x17x1 154 41x17x1 175 46x17x1 195 50x17x1 212

All dimensions are in inches.

DIMENSIONS

HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

17

V71


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA HHP CONCEALED CEILING WITH PLENUM

Model HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

Model

V

HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

Model

PERFORMANCE DATA

HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

V72

Model HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

Total MBH 15.5 23.0 27.5 29.3 36.7 43.3 49.8 51.8

2-PIPE SYSTEM 3 Rows Cooling (1) 3 Rows Sensible Flow PD Sensible MBH gpm ft wg MBH 13.4 3.1 2.92 51.9 18.7 4.6 6.84 71.3 21.9 5.5 10.27 83.1 24.6 5.8 2.39 96.1 30.6 7.3 3.89 117.9 35.5 8.6 5.61 135.9 39.8 9.9 7.83 151.9 43.4 10.3 3.80 167.6

Heating Flow gpm 3.5 4.9 5.7 6.6 8.0 9.3 10.4 11.4

(1) PD ft wg 2.83 5.86 8.38 2.42 3.77 5.22 6.92 3.92

Total MBH 19.9 24.6 29.5 37.4 46.4 49.9 57.0 65.9

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 15.6 4.0 6.05 60.8 4.2 5.03 20.1 4.9 1.86 80.0 5.1 1.83 23.5 5.9 2.78 93.4 6.4 2.61 28.6 7.5 4.73 111.9 7.6 4.03 35.5 9.3 7.53 137.6 9.4 6.32 39.5 10.0 3.84 155.4 10.6 3.68 44.1 11.4 5.25 173.1 11.8 4.81 50.5 13.2 7.19 195.7 13.4 6.34

Total MBH 19.6 28.9 34.4 42.6 49.4 57.9 65.8 71.5

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 15.6 3.9 1.30 63.3 4.3 1.26 21.8 5.8 2.99 86.6 5.9 2.55 25.5 6.9 4.41 100.7 6.9 3.60 30.7 8.5 7.23 120.0 8.2 5.51 36.8 9.9 4.15 145.6 9.9 3.60 42.8 11.6 5.90 167.8 11.5 4.97 47.6 13.1 7.98 186.0 12.7 6.43 52.9 14.3 5.70 208.1 14.2 5.06

Total MBH 22.0 31.8 37.7 43.3 54.3 63.4 68.5 78.3

2-PIPE SYSTEM 6 Rows Cooling 6 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 16.3 4.4 1.87 66.2 4.5 1.59 22.7 6.4 4.17 90.1 6.1 3.20 26.5 7.5 6.10 104.5 7.1 4.50 30.7 8.6 3.48 122.0 8.3 2.78 38.4 10.8 5.63 151.3 10.3 4.41 44.6 12.7 7.94 174.3 11.9 6.08 48.3 13.7 5.62 190.4 13.0 4.60 55.1 15.6 7.53 216.1 14.7 6.07

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

Model HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

Model HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

Model HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

Total MBH 10.0 15.1 18.2 23.0 23.8 28.3 32.8 37.7

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 9.7 2.0 0.89 20.1 13.6 3.0 2.17 28.4 16.0 3.6 3.29 33.4 19.4 4.6 5.67 40.6 22.3 4.8 1.28 49.3 25.9 5.6 1.87 53.9 29.1 6.6 2.65 61.0 33.1 7.5 3.61 68.8

Heating Flow PD gpm ft wg 1.4 1.19 1.9 2.59 2.3 3.76 2.8 6.05 3.4 9.32 3.7 1.83 4.2 2.52 4.7 3.35

Total MBH 15.1 22.2 26.4 28.3 35.5 41.9 48.1 50.1

4-PIPE SYSTEM 3 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 12.8 3.0 2.77 19.6 17.9 4.4 6.47 27.6 20.9 5.3 9.55 32.4 23.5 5.7 2.26 39.4 29.3 7.1 3.67 47.8 34.0 8.4 5.29 52.3 38.1 9.6 7.35 59.2 41.5 10.0 3.58 66.8

Heating Flow PD gpm ft wg 1.3 1.16 1.9 2.50 2.2 3.63 2.7 5.79 3.3 8.97 3.6 1.91 4.0 2.61 4.6 3.38

Total MBH 19.3 23.6 28.2 35.7 44.7 47.7 54.8 62.9

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 14.9 3.8 5.70 19.0 19.0 4.7 1.72 26.7 22.3 5.6 2.56 31.4 27.1 7.1 4.35 38.1 33.8 8.9 7.05 46.3 37.4 9.5 3.53 50.7 41.9 11.0 4.88 57.4 47.9 12.6 6.61 64.7

Heating Flow PD gpm ft wg 1.3 1.12 1.8 2.38 2.1 3.46 2.6 5.55 3.2 8.60 3.5 1.91 3.9 2.60 4.4 3.46

Total MBH 18.7 27.9 33.0 43.9 47.4 55.8 62.9 68.5

4-PIPE SYSTEM 5 Rows Cooling 1 Row Sensible Flow PD Sensible MBH gpm ft wg MBH 14.8 3.7 1.19 18.5 20.8 5.6 2.80 26.0 24.2 6.6 4.10 30.5 29.3 8.2 6.74 36.9 35.0 9.5 3.84 44.9 40.8 11.1 5.51 49.3 45.3 12.6 7.36 55.7 50.3 13.7 5.27 62.8

Heating Flow PD gpm ft wg 1.3 1.07 1.8 2.31 2.1 3.34 2.5 5.33 3.1 8.21 3.4 1.97 3.8 2.65 4.3 3.44

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


Fan Coils

PERFORMANCE DATA

HHP06 HHP08 HHP10 HHP12 HHP14 HHP16 HHP18 HHP20

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

Nominal Air Volumes cfm (1) Model High Med Low HHP06 843 638 536 HHP08 1119 736 599 HHP10 1280 1094 774 HHP12 1486 1131 850 HHP14 1873 1265 1041 HHP16 2154 1434 1172 HHP18 2330 2008 1477 HHP20 2660 2258 1844

1. Nominal air volume ratings are based on a 3-row coil at sea level altitude with 0 external static pressure. 2. Air volumes are based at high fan speed.

www.titus-hvac.com | www.titus-energysolutions.com

Model

Motor HP Total AMPS 1/4 3.60 1/4 4.30 1/4 4.30 1/3 5.10 2 x 1/4 2 x 4.20 2 x 1/4 2 x 4.20 2 x 1/4 2 x 4.50 2 x 1/3 2 x 4.50

V

PERFORMANCE DATA V73


V

Fan Coils

HHE Factory assembled, horizontal blow-thru, high-output HHE fan coils are designed for exposed ceiling installations free blowing into the space suitable for industrial and commercial applications. HHE

www.titus-hvac.com | www.titus-energysolutions.com

Horizontal High Output Series (continued)

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • Cabinet components fabricated of 18GA G90 galvanized • Unpainted cabinet. • Cabinet liner in ½-inch dual-density fiberglass. • High-efficiency 3-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-Inch thick disposable filter. • Multi-speed motor(s) of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blower(s) of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside (Consult Titus for availability). • 1-Inch discharge grille air flanges. • 1-Inch return air flanges. • Anti-vibration mounts for field installation.

OPTIONAL FEATURES INCLUDE

HHE

• 4-, 5- And 6-row coils for 2-pipe systems. • Single block coil with 2, 3, 4 and 5 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (6 rows max). • Single block coil with 2, 3 and 4 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (6 rows max). • LH or RH pipe connections entry. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Bottom or rear return air and filter location. • Cabinet liner in ½-inch foil face.

• Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect. • Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supplies disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Double wall construction consisting of outer and inner skins. ◊ Condensate pan overflow safety switch. • Bottom or rear return air • Access panel fasteners: ◊ Philips head screws. ◊ Tamper proof fasteners. ◊ Quarter turn fasteners.

V74

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

HHE EXPOSED CABINET

TOP VIEW

2

C

1 2

4

2 3/4

27 21

11

5 6

7

1 1/4 5 1/2

8 9

B

V

10

A-2 1/2

1 1/4

Note: Right Hand Unit with Duct Flange Shown

A 1 3/4

FRONT VIEW

1

SIDE VIEW

11 7/8

19

3

1

1

14

Ø'D'

3 30

1. 2. 3. 4.

Return Air Flange Filter Access panel Motor/Blower(s) Assemby

5. Condensate Connection 3/4” MNPT 6. Condensate Tray (Double Wall optional) 7. Coil Connections (2-Pipe Shown)

Model A 29 34 37 42 46 50 55 59

B 13 18 21 26 30 34 39 43

Approx. Weight D ⅝ ⅝ ⅞ ⅞ ⅞ ⅞ ⅞ ⅞

(pounds) Filter 22x16x1 120 27x16x1 132 30x16x1 135 35x16x1 156 39x16x1 200 43x16x1 230 48x16x1 248 52x16x1 262

All dimensions are in inches.

DIMENSIONS

HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

Dimensions (inches) C 20 25 28 33 37 41 46 50

8. Hanging Points 9. Coil 10. Supply Air Flange 11. Electric Heaters (optional)

V75


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA HHE EXPOSED CABINET

Model HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

Model

V

HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

Model

PERFORMANCE DATA

HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

V76

Model HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

2-PIPE SYSTEM 3 Rows Cooling (1) 3 Rows Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 15.5 13.4 3.1 2.92 51.9 23.0 18.7 4.6 6.84 71.3 27.5 21.9 5.5 10.27 83.1 29.3 24.6 5.8 2.39 96.1 36.7 30.6 7.3 3.89 117.9 43.3 35.5 8.6 5.61 135.9 49.8 39.8 9.9 7.83 151.9 51.8 43.4 10.3 3.80 167.6

Heating Flow gpm 3.5 4.9 5.7 6.6 8.0 9.3 10.4 11.4

(1) PD ft wg 2.83 5.86 8.38 2.42 3.77 5.22 6.92 3.92

Total MBH 19.9 24.6 29.5 37.4 46.4 49.9 57.0 65.9

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 15.6 4.0 6.05 60.8 4.2 5.03 20.1 4.9 1.86 80.0 5.1 1.83 23.5 5.9 2.78 93.4 6.4 2.61 28.6 7.5 4.73 111.9 7.6 4.03 35.5 9.3 7.53 137.6 9.4 6.32 39.5 10.0 3.84 155.4 10.6 3.68 44.1 11.4 5.25 173.1 11.8 4.81 50.5 13.2 7.19 195.7 13.4 6.34

Total MBH 19.6 28.9 34.4 42.6 49.4 57.9 65.8 71.5

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 15.6 3.9 1.30 63.3 4.3 1.26 21.8 5.8 2.99 86.6 5.9 2.55 25.5 6.9 4.41 100.7 6.9 3.60 30.7 8.5 7.23 120.0 8.2 5.51 36.8 9.9 4.15 145.6 9.9 3.60 42.8 11.6 5.90 167.8 11.5 4.97 47.6 13.1 7.98 186.0 12.7 6.43 52.9 14.3 5.70 208.1 14.2 5.06

Total MBH 22.0 31.8 37.7 43.3 54.3 63.4 68.5 78.3

2-PIPE SYSTEM 6 Rows Cooling 6 Rows Heating Sensible Flow PD Sensible Flow PD MBH gpm ft wg MBH gpm ft wg 16.3 4.4 1.87 66.2 4.5 1.59 22.7 6.4 4.17 90.1 6.1 3.20 26.5 7.5 6.10 104.5 7.1 4.50 30.7 8.6 3.48 122.0 8.3 2.78 38.4 10.8 5.63 151.3 10.3 4.41 44.6 12.7 7.94 174.3 11.9 6.08 48.3 13.7 5.62 190.4 13.0 4.60 55.1 15.6 7.53 216.1 14.7 6.07

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

Model HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

Model HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

Model HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

4-PIPE SYSTEM 2 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 10.0 9.7 2.0 0.89 20.1 15.1 13.6 3.0 2.17 28.4 18.2 16.0 3.6 3.29 33.4 23.0 19.4 4.6 5.67 40.6 23.8 22.3 4.8 1.28 49.3 28.3 25.9 5.6 1.87 53.9 32.8 29.1 6.6 2.65 61.0 37.7 33.1 7.5 3.61 68.8

Heating Flow PD gpm ft wg 1.4 1.19 1.9 2.59 2.3 3.76 2.8 6.05 3.4 9.32 3.7 1.83 4.2 2.52 4.7 3.35

4-PIPE SYSTEM 3 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 15.1 12.8 3.0 2.77 19.6 22.2 17.9 4.4 6.47 27.6 26.4 20.9 5.3 9.55 32.4 28.3 23.5 5.7 2.26 39.4 35.5 29.3 7.1 3.67 47.8 41.9 34.0 8.4 5.29 52.3 48.1 38.1 9.6 7.35 59.2 50.1 41.5 10.0 3.58 66.8

Heating Flow PD gpm ft wg 1.3 1.16 1.9 2.50 2.2 3.63 2.7 5.79 3.3 8.97 3.6 1.91 4.0 2.61 4.6 3.38

4-PIPE SYSTEM 4 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 19.3 14.9 3.8 5.70 19.0 23.6 19.0 4.7 1.72 26.7 28.2 22.3 5.6 2.56 31.4 35.7 27.1 7.1 4.35 38.1 44.7 33.8 8.9 7.05 46.3 47.7 37.4 9.5 3.53 50.7 54.8 41.9 11.0 4.88 57.4 62.9 47.9 12.6 6.61 64.7

Heating Flow PD gpm ft wg 1.3 1.12 1.8 2.38 2.1 3.46 2.6 5.55 3.2 8.60 3.5 1.91 3.9 2.60 4.4 3.46

4-PIPE SYSTEM 5 Rows Cooling 1 Row Total Sensible Flow PD Sensible MBH MBH gpm ft wg MBH 18.7 14.8 3.7 1.19 18.5 27.9 20.8 5.6 2.80 26.0 33.0 24.2 6.6 4.10 30.5 43.9 29.3 8.2 6.74 36.9 47.4 35.0 9.5 3.84 44.9 55.8 40.8 11.1 5.51 49.3 62.9 45.3 12.6 7.36 55.7 68.5 50.3 13.7 5.27 62.8

Heating Flow PD gpm ft wg 1.3 1.07 1.8 2.31 2.1 3.34 2.5 5.33 3.1 8.21 3.4 1.97 3.8 2.65 4.3 3.44

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


PERFORMANCE DATA

1. Nominal air volume ratings are based on a 3-row coil at sea level altitude with 0 external static pressure. 2. Air volumes are based at high fan speed.

Model HHE06 HHE08 HHE10 HHE12 HHE14 HHE16 HHE18 HHE20

Motor Total HP AMPS 1/4 3.60 1/4 4.30 1/4 4.30 1/3 5.10 2 x 1/4 2 x 4.20 2 x 1/4 2 x 4.20 2 x 1/4 2 x 4.50 2 x 1/3 2 x 4.50

www.titus-hvac.com | www.titus-energysolutions.com

Nominal Air Volumes cfm (1) Model High Med Low HHE06 843 638 536 HHE08 1119 736 599 HHE10 1280 1094 774 HHE12 1486 1131 850 HHE14 1873 1265 1041 HHE16 2154 1434 1172 HHE18 2330 2008 1477 HHE20 2660 2258 1844

Fan Coils

V

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

PERFORMANCE DATA V77


www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

SPECIFICATIONS

V

V78

Fan Coils

FAN COILS Horizontal High Output Standard Configurations 1. Furnish and install Titus models HHC, HHP and HHE horizontal high output fan coils of sizes and capacities shown on the plans to meet prevailing cooling and heating requirements. 2. Fan coils shall be performance certified to AHRI Standard 440. 3. Units shall be wired in compliance with ANSI/UL 1995 Standard and listed with ETL. 4. Fan coils shall be sound tested in accordance with AHRI Standard 260 for ducted units and AHRI Standard 350 for non-ducted units. Manufacturer shall provide these dB ratings on request for each model specified. 5. Unit casing shall be 18-gauge, zinc coated, phosphate treated, G90 galvanized steel. 6. High-efficiency, 3-row coil shall be suitable for a 2-pipe system. Coils shall be manufactured with aluminum fins mechanically bonded to seamless copper tubes. The copper tubes shall be ½-inch OD with a wall thickness of 0.017-inch which comply with ASTM B-75. The fins shall be waved with ripple edges for superior efficiency with a thickness of 0.045-inch and spaced at 10 fpi. Coils rated to 300 psi operational pressure. All coils shall be shipped with a safety air pressure of 30 - 50 psi to guarantee a leak free arrival at the final destination. 7. Unit pipe entry location shall be in accordance with the project schedule. 8. Coils shall be installed with manual Schrader type air vents with a sealing cap and be located at the highest point of the coil. The cap shall have a dual purpose, to seal any potential water leakage in the eventuality of Schrader valve failure and as a service tool for the extraction/insertion of the internal Schrader valve. 9. Standard filters (HHP and HBE only) shall be 1-inch nominal thickness of the disposable type with a onepiece moisture resistant chipboard frame to eliminate corner separations. The spun glass filtering media shall be bonded with a resinous agent providing rigidity and resistance to media compression and meets UL class 2. 10. Cabinets/plenum (HBP and HBE only) shall be lined with ½-inch dual-density fiberglass with a density of 1.5lbs/ ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances), NFPA 255, UL 181, UL723 and ASTM E84.

11. Motors shall be multi-speed of the permanent split capacitor type (PSC) and be directly coupled to the centrifugal fan blower. Motor shall be suitable for a power supply of 115V/1Ph/60Hz and shall be internally protected with an automatic thermal overload. Motor shaft shall be supported by sleeve bearings of the permanently lubricated type for the full life expectancy of the motor. All motors shall be directly mounted to the fan blower and be isolated from the unit casing by three resilient anti-vibration mounts. 12. Direct-driven fan shall be of the whisper quite type, Double Width Double Inlet (DWDI) forward curved statically and dynamically balanced at the factory. The fan wheel and casing shall be constructed of galvanized steel. 13. Electric components shall be wired to a single control panel for single point power supply. Wiring exposed to the outside of the units shall be installed in conduits to meet UL 1995 safety requirements. 14. Condensate pans shall be single-wall 18-gauge G90 galvanized steel welded at the corners, thermally protected on the outside with fire and smoke rated ¼-inch high-density insulation to prevent condensation. The factory installed 3/4” MNPT condensate connection shall be located at the lowest point of the condensate pan to ensure all water drains from the condensate pan (Consult Titus for availability). 15. Discharge air flange shall be 1-inch to facilitate the connection of field ducts. 16. Return air flanges (HHP and HHE only units) shall be 1-inch to facilitate the connection of field ducts. 17. Four (4) anti-vibration rubber mountings shall be provided for field installation in order to isolate any cabinet vibrations from the building structure.


Fan Coils

SUGGESTED SPECIFICATIONS

COOLING AND HEATING COIL

1. Shall be high-efficiency 4-, 5- and 6-row coils suitable for 2-pipe systems, or 2. High-efficiency single block with 2, 3,4 and 5 rows chilled water (CW) with 1-row re-heat/pre-heat coil suitable for 4-pipe system applications, or 3. High-efficiency single block with 2, 3 and 4 rows chilled water (CW) with 2-row re-heat/pre-heat coil suitable for 4-pipe system applications.

FILTER

1. Filter shall be 1-inch pleated filter with an average atmospheric dust spot efficiency range of 20 - 30% per ASHRAE Standard 52.1 test method, or 2. Filter shall be 1-inch washable filter consisting of synthetic fibers coated with a special resin, then baked together at a high temperature resulting in a tough and springy, thoroughly bonded, nearly rigid air filtration media. Washable filters shall have a longer service life, better structural integrity as well as being completely odor free. 3. A spare set of filters shall be available for replacement after the commissioning of the unit and prior to the handover of the project.

CABINET INSULATION

Cabinet liners shall be 1-inch dual-density fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances) and NFPA 255 with less than 25 flame and less than 50 smoke spread, UL 181, UL723 and ASTM E84.

MOTOR AND MOTOR ACCESSORIES

1. Motors shall be suitable for 115V/1Ph/60Hz or 208V/1Ph/60Hz or 230V/1Ph/60Hz or 277V/1Ph/60Hz power supplies (delete as applicable). 2. A motor in-line quick disconnect shall be installed to facilitate the removal/replacement of motor (HHP and HHE units only).

THERMOSTAT AND ACCESSORIES

Refer to Accessories on page V86.

DISCONNECT SWITCH AND FUSES

TWO-PIPE HEAT / COOL AUTO CHANGEOVER SWITCH

A mechanical changeover switch shall be supplied on 2-pipe systems to automatically change over the operation of the thermostat for summer and winter modes.

1. Electric heaters shall be of the wound type mounted in a metal frame and supported by ceramic rings and terminals. Electric heaters shall be installed on the blower discharge side for better heat dissipation and shall include an automatic reset high limit cut-out and contactor. 2. 2-pipe standby electric heating - heaters shall be installed and pre-wired as standby heating for the eventuality of a failure of the primary hot water (HW) system. A changeover sensor shall be installed in each unit and the changeover between the failed hot water system and the standby electric heater shall be automatic.

CHILLED AND HOT WATER VALVE CONTROLS

Refer to Accessories on page V86.

CONDENSATE PAN AND ACCESSORIES

1. Condensate pan shall be single wall manufactured in 20-gauge 304 stainless steel and shall be thermally protected on the outside with fire and smoke rated Ÿ-inch high-density insulation to prevent condensation. The factory installed 3/4� MNPT condensate connection shall be located at the lowest point of the condensate pan to ensure that all water is drained from the condensate pan (Consult Titus for availability), or 2. Condensate pan shall be double wall construction consisting of an outer and inner skin. The outer skin shall be manufactured of 18-gauge G90 galvanized sheet metal wrapped around the inner skin with 1-inch thermal insulation between both skins to prevent condensation. The inner skin of the double wall condensate pan shall be of 18-gague G90 galvanized sheet metal, or 3. Condensate pan shall be double wall construction consisting of an outer and inner skin. The outer skin shall be manufactured of 18-gauge G90 galvanized sheet metal wrapped around the inner skin with 1-inch thermal insulation between both skins to prevent the formation of condensation. The inner skin of the double wall condensate pan shall be of 20-gauge 304 stainless steel galvanized sheet metal. 4. An automatic safety overflow switch shall be installed in the condensate pan and shall prevent the operation of the unit electric system if an overflow status is detected. 5. A condensate water safety overflow connection shall be provided.

ACCESS PANEL AND ACCESSORIES - HHE ONLY

1. Access panel security fasteners shall be tamperproof, which requires a special tool to access the units, or 2. Return air/access panel security fasteners shall be of the quarter turn type, to facilitate the removal of the access panel.

V

SPECIFICATIONS

Units shall be wired for single point power supply with a disconnect switch and fuse(s) to match the unit full maximum circuit ampacity (MCA) in line with UL 1995.

ELECTRIC HEATER AND ACCESSORIES

www.titus-hvac.com | www.titus-energysolutions.com

FAN COILS Horizontal High Output Optional Configurations

V79


Fan Coils

Factory assembled vertical draw-thru, high-output VHC fan coils are designed for ducted closet installations suitable for industrial and commercial applications. VHC

www.titus-hvac.com | www.titus-energysolutions.com

V

Vertical High Output Series VHC

STANDARD FEATURES INCLUDE

• Performance AHRI Certified to Standard 440. • ETL-Listed. Constructed in compliance with ANSI/UL 1995 Standard. • All casing sheet metal components fabricated of 18GA G90 galvanized steel. • High-efficiency 3-row coil suitable for a 2-pipe system. • Coil manual air vent. • 1-Inch thick disposable filter. • Cabinet liner in ½-inch dual-density fiberglass. • Multi-speed motor of the permanent split capacitor (PSC) type. • Double Width Double Inlet (DWDI) direct driven blowers of the whisper quite type. • Controls installed in a single control box suitable for single power supply. • Single wall condensate pan in galvanized steel, thermally protected on the outside. • 1-inch discharge air flange for duct applications.

• Thermostat and Accessories (Refer to Accessories on page V86 for details). • Single power supplies disconnect switch and fuses. • Automatic 2-pipe changeover switch for heating and cooling applications. • Electric heaters. • HW standby electric heater auto changeover switch. • Valve Packages (Refer to Accessories on page V86 for details). • Condensate pan options: ◊ Single wall condensate pan manufactured in 20GA 304 Stainless Steel. ◊ Condensate pan mastic coating applicable to the inside of the condensate pan for a prolonged life. ◊ Condensate pan safety overflow switch.

OPTIONAL FEATURES INCLUDE

VHC

• 4-, 5- And 6-row coils for 2-pipe systems, or • Single block coil with 2, 3, 4 and 5 rows CW with 1 row re-heat or pre-heat coils for 4-pipe system applications (6 rows max). • Single block coil with 2, 3 and 4 rows CW with 2 rows re-heat or pre-heat for 4-pipe system applications (6 rows max). • LH or RH pipe connections entry. • Automatic coil air vents. • Filter option include: ◊ 1-inch high-efficiency pleated filters. ◊ 1-inch washable filters. • Cabinet liner in 1-inch dual-density fiberglass. • Motor voltage suitable for 208V, 230V or 277V/1Ph/60Hz power supplies. • Motor in-line quick disconnect.

V80

A Participating Corporation in the AHRI 440 Certification Program


Fan Coils

DIMENSIONS

TOP VIEW B 2

E

11 1/4

2 1/8 2 1/4

1

4 3/4 11 3/8

7 1/4

9 3/4

2

1

4

3 5/8 Left Side Right Side 5 5/8

3

5

1821

6 1/8

10 7/8 12 1/8

41

www.titus-hvac.com | www.titus-energysolutions.com

VHC CONCEALED CLOSET

7

7

V

9 6

Ø'C'

6

8

A

D

1 1/8 7/8 SIDE VIEW

FRONT VIEW

Note: Right Hand Unit Shown

1. Cold Water Coil Connections - 2/4 pipe supply and return O.D. = “C” 2. Hot Water Coil Connections - 4 pipe supply and return O.D. = ⅝”

3. 4. 5. 6.

Supply Duct Collar Electrical Control Box Motor/Blower(s) Assemby Coil

Model A 23 28 32 37 42 47 52 56

B N/A N/A N/A N/A 27¾ 31¾ 35¾ 39¾

Approx. Weight E 5⅞ 8⅜ 10⅜ 12⅞ 7⅛ 8⅛ 8⅛ 8⅛

All dimensions are in inches.

(pounds) Filter 15x17x1 150 15x20x1 170 15x23x1 195 15x28x1 200 15x32x1 240 15x36x1 260 15x41x1 268 15x45x1 280

DIMENSIONS

VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

Dimensions (inches) C D ⅝ 11½ ⅝ 14 ⅞ 16 ⅞ 18½ ⅞ 21 ⅞ 23½ ⅞ 26 ⅞ 28

7. Filter 8. Condensate Connection ⅞” O.D. 9. Electrical Knockout Entires

V81


Fan Coils

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA VHC CONCEALED CLOSET

Model VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

Model

V

VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

Model

PERFORMANCE DATA

VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

V82

Model VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

2-PIPE SYSTEM 3 Rows Cooling (1) 3 Rows Total Sensible Flow PD Sensible MBH MBH GPM ft WG MBH 16.2 13.7 3.2 3.84 52.9 25.1 19.8 5.0 9.94 75.5 31.0 23.5 6.2 16.30 89.6 34.1 26.7 6.8 3.92 103.7 43.1 33.2 8.6 6.62 128.0 53.3 40.6 10.6 10.60 155.2 60.4 45.3 12.1 14.44 172.6 64.2 49.5 12.8 6.95 190.5

Heating (1) Flow PD GPM ft WG 3.6 3.58 5.2 8.05 6.1 12.36 7.1 3.43 8.7 5.54 10.6 8.57 11.8 11.26 13.0 6.12

Total MBH 20.5 27.1 33.6 38.5 49.0 60.7 68.8 74.6

2-PIPE SYSTEM 4 Rows Cooling 4 Rows Heating Sensible Flow PD Sensible Flow PD MBH GPM ft WG MBH GPM ft WG 15.8 4.1 7.77 61.8 4.2 6.31 21.3 5.4 2.66 84.2 5.7 2.40 25.2 6.7 4.34 99.6 6.8 3.61 29.1 7.7 2.53 116.0 7.9 2.28 36.4 9.8 4.28 143.3 9.8 3.66 44.7 12.1 6.85 174.1 11.9 5.64 49.7 13.7 9.23 192.9 13.2 7.30 54.9 14.9 6.49 214.7 14.7 5.63

Total MBH 20.3 31.2 38.3 43.7 55.6 65.6 74.0 84.4

2-PIPE SYSTEM 5 Rows Cooling 5 Rows Heating Sensible Flow PD Sensible Flow PD MBH GPM ft WG MBH GPM ft WG 15.8 4.1 1.64 64.2 4.4 1.52 22.9 6.2 4.14 90.4 6.2 3.30 27.0 7.6 6.67 105.8 7.2 4.88 31.0 8.7 3.75 122.8 8.4 2.97 38.9 11.1 6.35 151.6 10.3 4.78 46.5 13.1 5.28 182.4 12.4 4.32 51.6 14.8 7.03 201.3 13.7 5.51 58.6 16.8 9.36 227.1 15.5 7.20

Total MBH 22.6 34.3 38.7 47.5 57.2 70.9 79.4 90.3

2-PIPE SYSTEM 6 Rows Cooling 6 Rows Heating Sensible Flow PD Sensible Flow PD MBH GPM ft WG MBH GPM ft WG 16.6 4.5 2.33 66.9 4.6 1.92 23.8 6.8 5.76 93.4 6.4 4.10 26.9 7.7 3.11 106.8 7.3 2.38 32.1 9.5 5.01 125.4 8.6 3.55 39.0 11.4 4.30 153.1 10.5 3.28 48.1 14.2 6.85 186.7 12.7 5.07 53.2 15.9 9.01 205.2 14.0 6.43 60.3 18.0 11.94 231.6 15.8 8.41

1. Standard basic unit. 2. All ratings are based at sea level altitude, nominal air volumes at 0 external static pressure and with water as the cooling fluid.

Model VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

Model VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

Model VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

Model VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

Total MBH 10.4 16.8 21.2 26.6 29.0 36.2 41.6 47.1

4-PIPE SYSTEM 2 Rows Cooling 1 Row Sensible Flow PD Sensible MBH GPM ft WG MBH 9.9 2.1 1.17 20.7 14.5 3.3 3.24 30.6 17.5 4.2 5.54 37.2 21.2 5.3 9.53 42.8 24.6 5.8 2.31 53.1 30.2 7.2 3.76 64.2 33.8 8.3 5.23 72.4 38.2 9.4 6.95 81.4

Heating Flow PD GPM ft WG 1.4 1.53 2.1 3.67 2.5 5.88 2.9 1.35 3.6 2.19 4.4 3.42 4.9 4.66 5.6 6.15

Total MBH 15.6 24.2 29.9 32.7 41.5 51.4 58.2 61.8

4-PIPE 3 Rows Cooling Sensible Flow MBH GPM 13.0 3.1 18.9 4.8 22.5 6.0 25.4 6.5 31.7 8.3 38.8 10.3 43.2 11.6 47.3 12.3

1 Row Sensible MBH 20.1 29.7 36.0 41.5 51.5 62.2 70.2 78.9

Heating Flow PD GPM ft WG 1.4 1.48 2.0 3.54 2.5 5.65 2.8 1.35 3.5 2.23 4.2 3.47 4.8 4.70 5.4 6.10

Total MBH 19.7 26.0 32.2 36.9 46.9 58.2 65.9 71.5

4-PIPE SYSTEM 4 Rows Cooling 1 Row Sensible Flow PD Sensible MBH GPM ft WG MBH 15.1 3.9 7.24 19.5 20.2 5.2 2.46 28.7 24.0 6.4 4.02 34.8 27.6 7.4 2.33 40.1 34.5 9.4 3.96 49.7 42.4 11.6 6.34 60.2 47.2 13.2 8.53 67.8 52.1 14.3 5.99 76.2

Heating Flow PD GPM ft WG 1.3 1.43 2.0 3.36 2.4 5.35 2.7 1.33 3.4 2.20 4.1 3.42 4.6 4.61 5.2 5.99

Total MBH 19.4 30.0 36.6 42.0 53.0 62.6 70.6 80.7

4-PIPE SYSTEM 5 Rows Cooling 1 Row Sensible Flow PD Sensible MBH GPM ft WG MBH 15.0 3.9 1.50 19.0 21.8 6.0 3.86 27.9 25.7 7.3 6.15 33.7 29.5 8.4 3.49 38.9 36.9 10.6 5.84 48.2 44.1 12.5 4.85 58.3 49.0 14.1 6.44 65.6 55.7 16.1 8.63 73.8

Heating Flow PD GPM ft WG 1.3 1.36 1.9 3.23 2.3 5.12 2.7 1.34 3.3 2.20 4.0 3.36 4.5 4.51 5.0 5.94

SYSTEM PD ft WG 3.59 9.33 15.29 3.64 6.19 9.92 13.51 6.49

3. Cooling capacities are based on 80BF DB/67BF WB entering air, 45BF entering water, 10BF water temperature rise and high fan speed. 4. Heating capacities are based on 70BF DB entering air temperature, 180BF entering hot water, 30BF water temperature drop and high fan speed.


Fan Coils

PERFORMANCE DATA

VHC06 VHC08 VHC10 VHC12 VHC14 VHC16 VHC18 VHC20

Nominal Air Volumes cfm (1) Model High Med Low VHC06 840 683 584 VHC08 1122 801 660 VHC10 1054 1083 801 VHC12 1433 1189 934 VHC14 1763 1384 1166 VHC16 2160 1588 1325 VHC18 2333 2125 1629 VHC20 2642 2389 2018

1. Electric ratings are based on units suitable for a power supply of 115V/1Ph/60Hz.

1. Nominal air volume ratings are based on a 3-row coil at sea level altitude with 0 external static pressure. 2. Air volumes are based at high fan speed.

www.titus-hvac.com | www.titus-energysolutions.com

Model

Motor Total HP AMPS 1/4 3.60 1/4 4.30 1/4 4.30 1/3 5.10 2 x 1/4 2 x 4.20 2 x 1/4 2 x 4.20 2 x 1/4 2 x 4.50 2 x 1/3 2 x 4.50

V

PERFORMANCE DATA V83


www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

SPECIFICATIONS

V

V84

Fan Coils

FAN COILS Vertical High Output Standard Configurations 1. Furnish and install Titus model VHC vertical high-output fan coils of sizes and capacities shown on the plans to meet prevailing cooling and heating requirements. 2. Fan coils shall be performance certified to AHRI Standard 440. 3. Units shall be wired in compliance with ANSI/UL 1995 Standard and listed with ETL. 4. Fan coils shall be sound tested in accordance with AHRI Standard 260 for ducted units and AHRI Standard 350 for non-ducted units. Manufacturer shall provide these dB ratings on request for each model specified. 5. Unit casing shall be 18-gauge, zinc coated, phosphate treated, G90 galvanized steel. 6. High-efficiency, 3-row coil shall be suitable for a 2-pipe system. Coils shall be manufactured with aluminum fins mechanically bonded to seamless copper tubes. The copper tubes shall be ½-inch OD with a wall thickness of 0.014-inch which comply with ASTM B-75. The fins shall be waved with ripple edges for superior efficiency with a thickness of 0.0045-inch and spaced at 10 fpi. Coils rated to 300 psi operational pressure. All coils shall be shipped with a safety air pressure of 30 - 50 psi to guarantee a leak free arrival at the final destination. Unit pipe entry location shall be in accordance with the project schedule. 7. Coil shall be installed with manual Schrader type air vents with a sealing cap and be located at the highest point of the coil. The cap shall have a dual purpose, to seal any potential water leakage in the eventuality of Schrader valve failure and as a service tool for the extraction/insertion of the internal Schrader valve. 8. Filter shall be 1-inch nominal thickness of the disposable type with a one-piece moisture resistant chipboard frame to eliminate corner separations. The spun glass filtering media shall be bonded with a resinous agent providing rigidity and resistance to media compression and meets UL class 2. 9. Cabinet shall be lined with ½-inch dual-density fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances), NFPA 255, UL 181, UL723 and ASTM E84.

10. Motor(s) shall be multi-speed of the permanent split capacitor type (PSC) and be directly coupled to the centrifugal fan blower. Motor shall be suitable for a power supply of 115V/1Ph/60Hz and shall be internally protected with an automatic thermal overload. Motor shaft shall be supported by sleeve bearings of the permanently lubricated type for the full life expectancy of the motor. All motors shall be directly mounted to the fan blower and be isolated from the unit casing by three resilient anti-vibration mounts. 11. Direct-driven fan(s) shall be of the whisper quite type, Double Width Double Inlet (DWDI) forward curved statically and dynamically balanced at the factory. The fan wheel and casing shall be constructed of galvanized steel. 12. Electric components shall be wired to a single control panel for single point power supply. Wiring exposed to the outside of the units shall be installed in conduits to meet UL 1995 safety requirements. 13. Condensate pans shall be single-wall 18-gauge G90 galvanized steel welded at the corners, thermally insulated on the outside with ½-inch dual-density fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances), NFPA 255, UL 181, UL723 and ASTM E84 (Consult Titus for availability). 14. The factory installed ⅞-inch OD sweat copper condensate connection shall be located at the lowest point of the condensate pan to ensure all water drains from the condensate pan. 15. Discharge air flange(s) shall be 1-inch to facilitate the connection of field ducts.


Fan Coils

SUGGESTED SPECIFICATIONS

COOLING AND HEATING COIL

1. High-efficiency 4-, 5- and 6-row coils suitable for 2-pipe systems, or 2. High-efficiency single block with 2, 3, 4 and 5-rows chilled water (CW) with 1-row re-heat/pre-heat coil suitable for 4-pipe system applications, or 3. High-efficiency single block with 2, 3 and 4 rows chilled water (CW) with 2-row re-heat/pre-heat coil suitable for 4-pipe system applications.

FILTER

1. Filter shall be 1-inch pleated filter with an average atmospheric dust spot efficiency range of 20 - 30% per ASHRAE Standard 52.1 test method or, 2. Filter shall be 1-inch washable filter consisting of synthetic fibers coated with a special resin, then baked together at a high temperature resulting in a tough and springy, thoroughly bonded, nearly rigid air filtration media. Washable filters shall have a longer service life, better structural integrity as well as being completely odor free. 3. A spare set of filters shall be available for replacement after the commissioning of the unit and prior to the handover of the project.

CABINET INSULATION

Cabinet liners shall be 1-inch dual-density fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances) and NFPA 255 with less than 25 flame and less than 50 smoke spread, UL 181, UL723 and ASTM E84.

MOTOR AND MOTOR ACCESSORIES

1. Motors shall be suitable for 115V/1Ph/60Hz or 208V/1Ph/60Hz or 230V/1Ph/60Hz or 277V/1Ph/60Hz power supplies (delete as applicable). 2. A motor in-line quick disconnect shall be installed to facilitate the removal/replacement of motor.

TWO-PIPE HEAT / COOL AUTO CHANGEOVER SWITCH

A mechanical changeover switch shall be supplied on 2-pipe systems to automatically change over the operation of the thermostat for summer and winter modes.

ELECTRIC HEATER AND ACCESSORIES

1. Electric heaters shall be of the wound type mounted in a metal frame and supported by ceramic rings and terminals. Electric heaters shall installed on the blower and coil discharge side for better heat dissipation and shall include an automatic reset high limit cut-out and contactor. 2. 2-pipe standby electric heating - heaters shall be installed and pre-wired as standby heating for the eventuality of a failure of the primary hot water (HW) system. A changeover sensor shall be installed in each unit and the changeover between the failed hot water system and the standby electric heater shall be automatic.

CHILLED AND HOT WATER VALVE CONTROLS

Refer to Accessories on page V86.

CONDENSATE PAN AND ACCESSORIES

www.titus-hvac.com | www.titus-energysolutions.com

FAN COILS Vertical High Output Optional Configurations

V

1. Condensate pan shall be single wall manufactured in 20-gauge 304 stainless steel and shall be thermally protected on the outside with ½-inch dual-density fiberglass with a density of 1.5lbs/ft3 and 4.0lbs/ft3 for the face meeting NFPA 90A and 90B (appliances), NFPA 255, UL 181, UL723 and ASTM E84. 2. An automatic safety overflow switch shall be installed in the condensate pan and shall prevent the operation of the unit electric system if an overflow status is detected.

THERMOSTAT AND ACCESSORIES

Refer to Accessories on page V86.

DISCONNECT SWITCH AND FUSES

SPECIFICATIONS

Units shall be wired for single point power supply with a disconnect switch and fuse(s) to match the unit full maximum circuit ampacity (MCA) in line with UL 1995.

V85


www.titus-hvac.com | www.titus-energysolutions.com

ACCESSORIES

Fan Coils

Thermostats Basic model (RAB) – shall be electromechanical, remote wall thermostat, gas diaphragm based and shall include the following features: Temperature set-point control with dual set-point temperature scale (F/C) and adjustable min/max temperature mechanical limit stops; system off and 3-speed fan switch; heat/cool manual temperature switch; on/off control valve(s) output; fan auto or continuous selection; 24V thru 277V control voltage, 50 or 60Hz; and UL and cUL listed.

Electronic with LED indication model (RCC) – shall be electronic remote wall or unit mounted thermostat with LED indicators and shall include the following features: Temperature set-point control with dual set-point temperature scale (F/C) and adjustable min/max temperature mechanical limit stops; operational modes: off, normal, energy saving and frost protection; system off and 3-speed fan switch; fan continuous or temperature dependent operation; automatic heat/ cool temperature changeover control; heat/cool and fan on LED indication; on/off control valve(s) output; 24V control voltage, 50 or 60Hz; optional remote wall or duct sensor connection; and UL and cUL listed.

V

Electronic with LCD indication model (RDF) – shall be electronic remote wall or unit mounted thermostat with LCD indication and shall include the following features: Operational modes: off, normal, energy saving and standby; system off and 3-speed fan switch; fan continuous or temperature dependent operation; manual or automatic heat/cool temperature changeover control; min/max setpoint temperature limitation; setpoints or room temperature display; on/off control valve(s) output; 24V control voltage, 50 or 60Hz; optional remote duct or wall sensor connection; selectable installation and control parameters; and UL and cUL listed. Modulated model (RLA) – Shall be an electronic remote wall mounted thermostat with modulated outputs, UL and cUL listed.

Thermostat Accessories Thermostat shall be supplied with a remote duct mounted sensor (RCC, RDF and RLA models only).

ACCESSORIES

Thermostat shall be supplied with a remote wall mounted sensor (RCC, RDF and RLA models only).

V86


Fan Coils

ACCESSORIES

Thermostat shall be supplied with a wall mount plate (4.75� SQR) for covering unpainted wall areas or non-wallpaper areas. Thermostats shall be supplied with lockable covers to prevent unauthorized changes to the temperature set-points. Thermostat shall be suitable for 24V control voltage (all RCC, RDF and RLA thermostats must be 24V).

Motorized Control Valves Motorized control valves shall be 2- or 3-Way valve(s) with sweat or threaded connections and shall have the following features: Body and body trim made of brass; stem made of stainless steel ASTM A582 type 303 with Ethylene propylene sealing O-rings, suitable for water/glycol concentrations up to 50%; and operation between 34 to 230BF. Maximum inlet pressure of 125 psig; metal-to-metal seat with a stroke of 1/10-inch and rated to ANSI Class 125, close-off ratings in accordance with ANSI/FCI 70-2, class rate ANSI Class III and mounting location shall be NEMA1 (interior only).

Motorized Valve Actuators

www.titus-hvac.com | www.titus-energysolutions.com

Thermostat Accessories (continued)

V

Valve actuators shall be ON/OFF or modulated, normally closed to the coil with spring return action for CW and HW applications or normally open to the coil for HW applications only and shall have the following features: ON/OFF actuators shall be suitable for 24, 120, 208 or 277V control voltage; UL listed for plenums to UL 873; cUL certified to Canadian Standards C22.2 No 24-93; direct coupled installation without tools; manual override; visual position indication; 40 sec max running time; 1/10-inch nominal stroke; 24lb nominal force; operation temperature between 41 and 122BF and 0% to 90% relative humidity (non corrosive); NEMA 1 mounting location. Modulated actuators shall be suitable for 24V control voltage and a signal voltage of 0-10V; UL listed for plenums to UL 873; cUL certified to Canadian Standards C22.2 No 24-93; direct coupled installation without tools; manual override; visual position indication; 40 sec max running time; 1/10-inch nominal stroke; 24lb nominal force; Operation temperature between 41 and 122BF.

All valve actuators shall be compatible with 2 or 3-Way valves.

Ball valves shall be manufactured of brass OT58-UNI-5705-65 with a chrome plated brass ball with Teflonb seals. The shaft shall be sealed via dual VITON O-rings and capable of operating at 325BF and 600 psi pressure WOG. All ball valves shall be supplied with a memory stop actuator and be located in the inlet pipes to the fan coil unit.

ACCESSORIES

Valve Package Accessories

V87


www.titus-hvac.com | www.titus-energysolutions.com

ACCESSORIES

V

Fan Coils

Valve Package Accessories (continued) Unions shall be of forged brass ASTM B283 with VITON O-rings installed in the return and supply CW and/or HW pipes to facilitate the connection or removal of the unit.

Pressure and temperature test plugs shall have ¼-inch MNPT thread, suitable for operation up to 325BF and 1000 psi pressure. Test plugs shall be located in the return and supply CW and/or HW pipes to measure unit total pressure drop and/ or unit water in/out temperatures.

Strainers shall be of forged brass ASTM B283, suitable for operation up to 325BF and 600 psi pressure WOG. Mesh shall be #20 made of stainless steel and the mesh access cap shall be sealed with a VITON O-ring and the cap shall have a ¼-inch NPT access port. Strainers shall be installed to the supply CW and/or HW pipes to avoid blockages on the unit water system components. Coil blow down drain valves shall be of the chromed plated ball type with Teflonb seals; dual VITON O-rings seal suitable for operation up to 325BF and 600 psi pressure WOG. Valve connections shall be ¼-inch MNPT and ¾ inch hose bib and cap. Blow down valves shall be installed at the lowest point of the coils to enable the evacuation of all water for system repairs and/or coil replacements.

Automatic water flow control valve shall be manufactured of forged brass ASTM B283, suitable for operation up to 325BF and 600 psi pressure WOG. The automatic flow cartridge shall be removable and be accessible via forged brass cap sealed with VITON and EPDM O-rings. Auto flow control valves shall be installed with two pressure test plugs and be located in the return CW and/or HW pipes. The Auto Flow Control Valve(s) shall control the water flow in accordance with the project Fancoil coil schedule.

ACCESSORIES

Manual adjustable flow control valve shall br manufactured of forged brass ASTM B283 and be of the calibrated manual balancing valve type, modified venture ball valve with a union end and capable of operation at 325BF, 600 psi pressure WOG with the following featues: Ball valve with chrome plated brass ball and Teflon seals; Shaft sealed via dual VITON O-rings; Handle shall have a calibrated scale indicator and a stainless steel memory stop. Manual flow control valve shall be installed with two pressure test plugs and be located in the return CW and/or HW pipes. The Auto Flow Control Valve shall control the water flow in accordance with the project Fancoil coil schedule.

V88


Fan Coils

ACCESSORIES

Pipe flexible connectors shall be fire rated in compliance with ASTM E 84-00 (NFPA 225, ANSI/UL 723 and UBC 8-1) with the following features: Operating pressure 400 psi @ 265BF, fittings made of brass with NPSM swivel w/ seal and MNPT; fabric reinforced EPDM core; stainless steel braid reinforcement; brass OT58 fittings; stainless steel ferrule; fiber EPDM gasket.

“Combo” Accessories Valve package components shall be provided in single body “COMBO” package as follows: Ball valve + Strainer + Union and be installed in the supply side of the CW and/or HW coil, or

Ball valve + Auto flow control valve + Union and installed in the return side of the CW and/or HW coil, or

www.titus-hvac.com | www.titus-energysolutions.com

Flexible Connectors

V

Ball valve + Manual adjustable flow control valve + Union and be installed in the return side of the CW and/or HW coil.

Valve Package Connection Size

ACCESSORIES

Valve package connections shall be suitable for ⅝-inch in diameter copper piping for units up to and including sizes 08 (800 cfm nominal airflows) with CW connections and units up to size 20 (2000 cfm nominal airflow) for HW connections. All units sizes 10 (1000 cfm nominal airflow) and above the CW connections shall be suitable for copper piping in ⅞-inch diameter.

V89


www.titus-hvac.com | www.titus-energysolutions.com

ACCESSORIES

V

Fan Coils

Wireless Accessories Most ECM motors currently in the market have a 70% motor efficiency at full and partial loads which substantially reduces Energy costs. The ECM motor also has the ability to modulate the airflow to meet partial load requirements thereby further reducing the energy requirements of a building. The low operating temperature of the ECM motor also requires very little energy to offset the heat gain from the motor to the cooled airstream, thus also reducing the building energy requirements.

The modulated valve actuator control device increases Chiller and Boiler efficiency by 15-20% with substantial energy savings by meeting exact conditioned space load requirements. The overall net effect of modulated control valves adjusting the water flow rate to meet occupied space load requirements as they change, is increased occupant comfort in the conditioned space while reducing system energy costs.

One of the easiest ways to save energy and money is to upgrade to a programmable thermostat. These thermostats allow the fan coil unit to be programmed to run only at specific times of the day at specific temperatures. Programming the thermostat to shut down or reduce the cooling/heating demands during periods of time when the occupant is typically away will quickly begin reducing costs after installation. The occupant can always temporary override the program during these times if necessary.

ACCESSORIES

An alternative to improving the efficiency and energy consumption of the fan coil unit is to install a programmable thermostat with occupancy sensors or a keycard. The thermostat can be programmed to gradually reduce the cooling/ heating demand to a pre-specified point if an occupant is not present. By using these sensors in conjunction with a programmable thermostat, tighter control of the energy consumption of a fan coil unit can be maintained.

V90

An alternative to improving the efficiency and energy consumption of the fan coil unit is to install a programmable thermostat with a keycard. The thermostat can be programmed to gradually reduce the cooling/heating demand to a pre-specified point if an occupant is not present. By using this keycard in conjunction with a programmable thermostat, tighter control of the energy consumption of a fan coil unit can be maintained.

An alternative to improving the efficiency and energy consumption of the fan coil unit is to install a programmable thermostat with a motion sensor. The thermostat can be programmed to gradually reduce the cooling/heating demand to a prespecified point if an occupant is not present. By using this wireless motion sensor in conjunction with a programmable thermostat, tighter control of the energy consumption of a fan coil unit can be maintained.


air handlers

W www.titus-hvac.com | www.titus-energysolutions.com


www.titus-hvac.com | www.titus-energysolutions.com

Table of Contents

W

Air Handlers

air handler products Air Hander Products..................................................................................................................................................................... W3

overview Overview....................................................................................................................................................................................... W5

horizontal belt drive series HAB............................................................................................................................................................................................... W6 Dimensions........................................................................................................................................................................... W7 Performance Data............................................................................................................................................................... W10 Optional Accessories........................................................................................................................................................... W14

vertical belt drive series VAB............................................................................................................................................................................................. W17 Dimensions......................................................................................................................................................................... W18 Performance Data............................................................................................................................................................... W20 Optional Accessories........................................................................................................................................................... W22

modular belt drive series MAB............................................................................................................................................................................................ W23 Dimensions......................................................................................................................................................................... W24 Performance Data............................................................................................................................................................... W27 Optional Accessories........................................................................................................................................................... W30

rooftop belt drive series RAB............................................................................................................................................................................................. W32 Dimensions......................................................................................................................................................................... W33 Performance Data............................................................................................................................................................... W36 Optional Accessories........................................................................................................................................................... W39

suggested specifications Suggested Specifications........................................................................................................................................................... W40

AIR HANDLERS

motor data

W2

Air Hander Motor Data............................................................................................................................................................... W42


Air Handlers

Air Handler Products

HAB ROOFTOP APPLICATIONS • 800 to 8000 cfm nominal airflows • 0 to 1.5-inch external static pressure

www.titus-hvac.com | www.titus-energysolutions.com

HORIZONTAL BELT DRIVE SERIES

pages: W6-W16

W VERTICAL BELT DRIVE SERIES

pages: W17-W22

VAB • 800 to 8000 cfm nominal airflows • 0 to 1.5-inch external static pressure

AIR HANDLERS

ROOFTOP APPLICATIONS

W3


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

Air Handler Products (continued)

MODULAR BELT DRIVE SERIES

pages: W23-W29

MAB ROOFTOP APPLICATIONS • 800 to 8000 cfm nominal airflows • 0 to 1.5-inch external static pressure

W ROOFTOP BELT DRIVE SERIES

pages: W31-W39

AIR HANDLERS

RAB

W4

ROOFTOP APPLICATIONS • 800 to 8000 cfm nominal airflows • 0 to 1.5-inch external static pressure


Overview

Four different models available in numerous configurations, delivers a unit tailored to meet the needs of any project. Horizontal ceiling mounted units typically are used in applications that exceed the requirements of direct drive fan coils products. Rooftop units are installed externally introducing fresh air into the system. Vertical units are

generally installed in maintenance closets or mechanical rooms near the zones they serve so maintenance or service can be performed without intruding on the occupants. The modular unit is extremely flexible and can be adapted to meet most supply and return configurations. Titus Air Handlers can operate with 100 percent outside air, 100 percent recirculated air, or anywhere in between. All models are designed to allow easy access to all components for maintenance and service. Fan motors are installed on a variable pitch mounting plate allowing for fine tune balancing of the system in the field.

www.titus-hvac.com | www.titus-energysolutions.com

Either serving small areas or multiple zones Titus Air Handling Units supply the exact amount of treated, conditioned air to the occupied spaces of a building. These compact belt drive units are designed for efficient operation and provide economical heating and cooling. These units are the work horse of any system controlling building temperature, humidity, and indoor air quality.

Air Handlers

W

AIR HANDLERS W5


W6

Available Models: HAB08 HAB12 HAB16 HAB20 HAB30 HAB40 HAB60 HAB80

• 800 cfm • 1200 cfm • 1600 cfm • 2000 cfm • 3000 cfm • 4000 cfm • 6000 cfm • 8000 cfm

Each horizontal blower coil unit provides flexibility of design due to belt-driven fans, multi-row coil capability, and available factory options. These products are designed for the common areas and large meeting rooms in hotels, motels, apartment complexes, condominiums, schools, universities, hospitals, and nursing homes.

STANDARD FEATURES INCLUDE

• ETL-listed. Constructed in compliance with ANSI/UL 1995 Standard. • High efficiency coil – 4-row seamless 3/8-inch OD (HAB 08 & 12), ½-inch OD (HAB 16 & 20), and 5/8-inch OD (HAB 30 thru 80) copper tubes with 10 aluminum fins per inch for 2-pipe applications. • Pipe entry is right hand as you are looking at the filter (in the direction of the airflow). • Manual air vent. • Permanently lubricated ball bearing blowers. Blower wheels are belt-drive, double-inlet, forward-curved, and factory balanced. • Condensate pan fabricated of heavy gauge 304 stainless steel with three-dimensional slope for positive drainage. • Cabinet fabricated of heavy gauge galvanealed steel, specially coated on the outside with powder-coated enamel paint and lined with 1-inch, dual density, 1.5-pound fiberglass insulation with antimicrobial coating. • Suspension - ⅞-inch knockouts for use with ⅜-inch threaded suspension rod are provided at the top and bottom of all unit corners for hanging the unit. • Filters - 2-inch fiberglass disposable with a horizontal filter slide.

Air Handlers

HAB

www.titus-hvac.com | www.titus-energysolutions.com

HAB

W

Horizontal Air Handler Belt Drive Series HAB

OPTIONAL FEATURES INCLUDE

• High efficiency coil – 6-row seamless 3/8-inch OD (HAB 08 & 12), ½-inch OD (HAB 16 & 20), and 5/8-inch OD (HAB 30 thru 80) copper tubes with 10 aluminum fins per inch for 2-pipe applications. High efficiency coils – Chilled water 4- or 6-row seamless 3/8-inch OD (HAB 08 & 12), ½-inch OD (HAB 16 & 20), and 5/8-inch OD (HAB 30 thru 80) copper tubes with 10 aluminum fins per inch. Hot water 1- (HAB 08, 12, 16, & 20 only) or 2-row seamless 3/8-inch OD (HAB 08 & 12), ½-inch OD (HAB 16 & 20), and 5/8-inch OD (HAB 30 thru 80) copper tubes with 10 aluminum fins per inch. • Left hand pipe entry as you are looking at the filter (in the direction of the airflow). • Motors - Standard ETL-listed motors consist of Totally Enclosed, Fan Cooled (TEFC) and Open, Drip-Proof (ODP) casing, shaded-pole 115/60/1 in ¼ HP through 2 HP; TEFC and ODP 115/208-230/1 (wired for 115V) in 1/4 to 2 HP; TEFC and ODP 208-230/460/60/3 in ¼ HP to 10 HP; TEFC and ODP 575/60/3 in ¼ HP to 10 HP; other voltages, configurations, and horsepower options available, but not ETL-listed. All motor sheaves are variable-pitch and single-groove. Blower pulleys are split-tapered bushing. • Mixing boxes. • Controls for mixing boxes - Field install and wire, threeposition and fully modulating packages. Note: Controls such as contactors, starters, and/or transformers/fan relays are supplied by others. • Discharge plenum with adjustable double-deflection grille (cannot be used with electric heat). • Return air grille. • Unit spring vibration isolators. • Pleated filter, 2-inch. • Cabinet liner in closed cell insulation. • Electric heat - Models HAB08, 12, 16, 20, 30 and 40. • Double wall construction. • Face and bypass damper. • Face and bypass damper filter section.


Air Handlers

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

HAB HORIZONTAL BELT DRIVE

W A 49.5 49.5 49.5 49.5 63.0 63.0

B 39.0 39.0 48.0 48.0 57.0 57.0

C 35.0 35.0 44.0 44.0 53.0 53.0

D 16.0 16.0 20.5 20.5 32.4 32.4

Dimensions - Sizes 08 thru 40 E F G H 20.0 14.0 12.5 12.5 20.0 14.0 12.5 12.5 24.5 18.0 16.0 15.0 24.5 18.0 16.0 15.0 36.6 20.0 17.5 18.5 36.6 20.0 17.5 18.5

J 12.5 12.5 15.0 15.0 18.5 18.5

K 2.0 2.0 4.3 4.3 9.5 9.5

L 5.5 5.5 4.3 4.3 9.5 9.5

M 1.0 1.0 1.0 1.0 1.0 1.0

N 11.2 11.2 11.8 11.8 12.6 12.6

Unit 08 12 16 20 30 40

O 13.6 13.6 12.9 12.9 13.9 13.9

P 16.5 16.5 16.5 16.5 17.7 17.7

R 17.2 17.2 17.5 17.5 18.8 18.8

S N/A N/A 18.5 18.5 20.7 20.7

T 19.8 19.8 19.5 19.5 22.7 22.7

X 11.4 11.4 14.1 14.1 19.7 19.7

Y 9.2 9.2 13.2 13.2 18.5 18.5

Z 9.2 9.2 11.1 11.1 17.6 17.6

AA 2.8 2.8 1.1 1.1 3.3 3.3

BB 2.8 2.8 2.8 2.8 4.3 4.3

U 23.5 23.5 24.1 24.1 27.6 27.6

V 25.9 25.9 25.2 25.2 28.8 28.8

W 11.4 11.4 15.1 15.1 20.0 20.0

All dimensions are in inches.

DIMENSIONS

Unit 08 12 16 20 30 40

W7


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS HAB HORIZONTAL BELT DRIVE

W

DIMENSIONS

Unit 60 80

W8

A 47.0 47.0

B 72.0 72.0

C 57.5 57.5

Dimensions - Sizes 60 thru 80 D E F G 63.0 59.8 42.7 22.7 63.0 59.8 42.7 22.7

H 19.7 19.7

J 12.2 12.2

K 4.9 4.9

L 24.6 24.6


Air Handlers

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

HAB HORIZONTAL BELT DRIVE HAB Specifications Model

HAB08

HAB12

Fin Block HxW

10 X 31

13 X 31

Face Area

2.15

2.8

Rows

Water Conn. Header OD

1 2 4 6 1 2 4

Fin Block HxW

Model

Face Area

Rows

/8

2

5

HAB30

/8

7

22.5 X 47

7.34

/8

15 X 40

4.17

HAB40

/8

7

28.5 X 47

9.3

4

17.5 X 40

4.86

Note: Standard filter rack only accepts 2” TA or Pleated filters. Double wall filter rack accepts 2” or 4” TA or pleated filters.

HAB60

31.5 X 60

13.13

/8

HAB80

42 X 60

17.5

7

6 HAB20

/8

5

2

1 2 4 6

1 1/8 1 3/8

2

1 HAB16

/8

7

4 6

5

6

Water Conn. Header OD

/8

/8

7

4

1 1/8

6

1 3/8

2 4 6 2 4 6

1 1 1 1 1 2

/8 /8 5 /8 3 /8 5 /8 1 /8 1 3

5

CONTACT THE FACTORY FOR ADDITIONAL COIL INFORMATION

/8 1 1/8 7

Filter Quantity

Unit Model

Filter

8

14”

X

20”

X

2/4”

14”

X

25”

X

2/4”

16”

X

16”

X

2/4”

16”

X

20”

X

2/4”

20”

X

20”

X

2/4”

Filter Total

W

2 2

12

16

20

30

40

6

6

6

6

60

80

5

5

5

5

10

10

2 2

2

2

2

2

DIMENSIONS W9


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

W

HAB HORIZONTAL BELT DRIVE

Model

Standard Ratings - Water Coil 2- or 4-Pipe Cooling 80F DB / 67F WB EWT gpm PD Ft.

HAB08

45

6

5.7

HAB12

45

8

6.7

HAB16

45

10

6.4

HAB20

45

13

5.4

HAB30

45

17.5

6.4

HAB40

45

21

5.9

HAB60

45

31.5

6.8

HAB80

45

44

6.6

cfm 600 800 1000 900 1200 1500 1200 1600 2000 1500 2000 2500 2250 3000 3750 3000 4000 5000 5000 6000 7000 7000 8000 9000

TTL mbh 20.4 23.0 25.0 30.6 34.4 37.2 40.0 45.0 49.0 50.5 56.5 61.0 77.0 88.0 96.0 101 113 124 165 179 190 213 225 235

SENS LAT DB mbh 14.5 57.6 17.2 60.1 19.6 61.9 21.8 57.6 25.8 60.1 29.4 61.9 28.8 57.8 34.0 60.3 38.5 62.1 36.0 57.8 42.5 60.3 48.5 62.1 55.5 57.1 67.0 59.4 76.0 61.1 73.0 57.5 87.0 59.8 100 61.5 122 57.4 138 58.8 151 60.0 160 58.9 173 60.0 186 60.9

LAT WB 56.1 58.0 59.3 56.2 58.0 59.3 56.3 58.2 59.5 56.3 58.2 59.5 56.0 57.8 59.1 56.3 58.2 59.4 56.5 57.7 58.6 57.4 58.2 58.9

F

gpm PD Ft.

51.9 52.7 6 53.4 52.7 53.6 8 54.3 53.1 54.1 10 54.8 52.8 53.7 13 54.6 53.9 55.1 18 56.0 54.6 55.8 19.2 56.8 55.5 56.4 28.8 57.1 54.7 55.3 44 55.7

5.1

5.9

5.6

4.6

6

4.4

5.1

5.6

2-Pipe Heating 60F EAT / 180F EWT cfm TTL mbh LAT LWT 600 800 1000 900 1200 1500 1200 1600 2000 1500 2000 2500 2250 3000 3750 3000 4000 5000 5000 6000 7000 7000 8000 9000

57 68 77 85 102 115 113 134 152 142 169 190 220 264 301 284 339 383 483 539 588 628 680 728

147.9 138.6 131.2 148 138.6 131.1 147.3 137.9 130.3 147.4 138 130.5 150.4 141.5 134.3 147.5 138.2 130.7 149.2 143 137.5 142.8 138.5 134.7

160.5 156.8 153.8 158.1 153.9 150.6 156.8 152.5 148.9 157.7 153.5 150 155 149.9 145.8 149.7 144 139.3 145.8 141.8 138.4 150.9 148.4 146.2

Note: Standard ratings are for sea level altitude, standard 4-row coils, nominal air volumes and ordinary water. For other conditions and/or other coolants, consult Titus. Standard Ratings - 1-row Heating Coil

PERFORMANCE DATA

Model

W10

gpm PD Ft.

HAB08

3

9.9

HAB12

3

11.6

cfm TTL mbh 600 21.8 800 24.8 1000 27.2 900 32.2 1200 36.4 1500 39.5

LAT F 93.7 88.7 85.1 93.2 88.1 84.6

LWT F 165.1 163.1 161.4 158 155.1 152.8

Model

gpm PD Ft.

HAB16

4

4.5

HAB20

4

5.0

cfm TTL mbh 1200 47 1600 53 2000 58 1500 57 2000 64 2500 70

LAT F 96.2 90.7 86.8 95.2 89.7 85.9

LWT F 156 152.9 150.4 150.9 147.2 144.2

cfm TTL mbh 2250 147 3000 171 3750 190 3000 194 4000 225.5 5000 250 5000 306 6000 335 7000 361 7000 384 8000 408 9000 429

LAT F 120.5 112.8 107 119.8 112 106.3 116.5 111.7 107.6 110.7 107.1 104

LWT F 163.2 160.5 158.3 161.9 159.1 156.7 157.6 155.5 153.7 145 142.8 141

Standard Ratings - 2-row Heating Coil Model

gpm PD Ft.

HAB08

4

5.2

HAB12

6

4.1

HAB16

8

3.0

HAB20

12

2.7

cfm TTL mbh 600 36.2 800 41.5 1000 46 900 55 1200 63.5 1500 70 1200 75 1600 87 2000 97 1500 96 2000 111 2500 124

LAT F 116 108.4 102.8 116.8 109.1 103.5 118.4 110.6 104.9 119.4 111.6 105.9

LWT F 161.4 158.6 156.3 161.1 158.3 155.9 160.6 157.6 155.2 163.5 160.9 158.8

Model

gpm PD Ft.

HAB30

18

4.6

HAB40

22

5.6

HAB60

28

7.6

HAB80 22.4

2.6

Note: Capacities based on 60BF EAT and 180BF EWT. Units not recommended for heating applications when the LAT exceeds 130BF.


Air Handlers

PERFORMANCE DATA

Model

HAB08

HAB12

HAB16

HAB20

HAB30

HAB40

HAB60

HAB80

ISP

CFM

0.20 0.26 0.31 0.38 0.45 0.20 0.27 0.33 0.39 0.48 0.32 0.40 0.50 0.61 0.74 0.28 0.36 0.44 0.54 0.62 0.26 0.33 0.40 0.50 0.59 0.28 0.35 0.44 0.53 0.63 0.41 0.48 0.56 0.64 0.73 0.38 0.42 0.48 0.54 0.60

600 700 800 900 1000 900 1050 1200 1350 1500 1200 1400 1600 1800 2000 1500 1750 2000 2250 2500 2250 2625 3000 3375 3750 3000 3500 4000 4500 5000 5000 5500 6000 6500 7000 7000 7500 8000 8500 9000

0.25” RPM 786 835 897 957 1018 814 855 865 1040 1082 697 764 838 915 992 630 682 736 802 854 543 584 641 694 749 610 680 743 812 887 546 575 606 636 688 564 587 614 642 672

ESP BHP 0.11 0.13 0.19 0.23 0.28 0.15 0.21 0.25 0.36 0.44 0.27 0.35 0.49 0.64 0.87 0.27 0.37 0.49 0.68 0.84 0.40 0.56 0.78 1.05 1.37 0.68 0.99 1.39 2.01 2.70 1.00 1.18 1.43 1.72 2.08 1.60 1.89 2.19 2.54 2.92

Air Volume Capacity - 2-Pipe, 4-Row Coil 0.50” ESP 0.75” ESP 1.00” RPM BHP RPM BHP RPM 975 0.15 1160 0.22 1320 1006 0.20 1172 0.26 1321 1052 0.24 1201 0.31 1341 1110 0.30 1239 0.35 1365 1161 0.35 1291 0.43 1406 906 0.21 1051 0.32 1313 989 0.27 1112 0.34 1391 1009 0.34 1174 0.43 1411 1195 0.45 1349 0.58 1463 1241 0.56 1380 0.68 1499 809 0.33 916 0.43 1023 864 0.44 962 0.54 1071 931 0.61 1020 0.70 1103 996 0.77 1077 0.89 1156 1061 0.98 1134 1.08 1203 751 0.37 857 0.46 953 793 0.47 890 0.60 983 839 0.61 934 0.75 1019 893 0.79 980 0.94 1058 941 0.99 1025 1.14 1103 634 0.52 723 0.65 803 679 0.73 758 0.87 838 724 0.97 794 1.11 876 769 1.25 842 1.44 906 820 1.59 866 1.80 947 695 0.84 771 0.99 847 750 1.15 821 1.37 886 811 1.69 877 1.91 938 879 2.28 939 2.52 993 947 2.89 1003 3.20 1056 637 1.22 717 1.46 791 656 1.46 732 1.75 806 684 1.74 755 2.06 824 705 2.03 776 2.36 842 738 2.39 800 2.70 865 640 1.96 712 2.27 776 660 2.21 728 2.52 790 686 2.54 749 2.89 809 702 2.90 769 3.36 827 733 3.39 791 3.87 846

ESP BHP 0.29 0.32 0.38 0.43 0.49 0.41 0.50 0.56 0.65 0.78 0.52 0.66 0.78 0.99 1.23 0.58 0.69 0.88 1.07 1.28 0.79 1.02 1.31 1.61 2.00 1.15 1.53 2.13 2.77 3.45 1.74 2.05 2.37 2.68 3.03 2.58 2.83 3.27 3.86 4.36

1.25” RPM 1470 1471 1483 1489 1517 1468 1504 1576 1576 1617 1113 1145 1179 1228 1280 1053 1074 1100 1134 1173 882 903 935 969 1009 925 954 999 1054 1107 868 879 892 904 926 839 850 967 884 902

ESP BHP 0.38 0.40 0.44 0.49 0.58 0.54 0.60 0.68 0.77 0.90 0.62 0.74 0.92 1.11 1.34 0.68 0.81 0.98 1.21 1.43 0.94 1.17 1.47 1.80 2.21 1.38 1.74 2.36 3.04 3.74 2.03 2.36 2.67 2.98 3.46 2.90 3.25 3.68 4.36 4.84

ESP BHP 0.43 0.48 0.54 0.59 0.65 0.63 0.68 0.82 0.89 1.03 0.70 0.85 1.05 1.23 1.47 0.80 0.95 1.12 1.34 1.60 1.08 1.33 1.63 2.01 2.43 1.51 1.96 2.60 3.19 4.05 2.36 2.68 2.98 3.44 3.89 3.29 3.68 4.21 4.86 5.44

W

PERFORMANCE DATA

Notes: 1. Motor HP = 1.15* x BHP * In the absence of a specified drive loss factor, use 1.15. To select motor size, find the Brake Horsepower (BHP) for the design cfm and External Static Pressure (ESP). Multiply BHP by 1.15 (or specified factor) and round up to next size motor. Example: 1600 cfm at 0.75-inch ESP requires 0.70 BHP. 1.15 x 0.70 = 0.805. Round up to nearest nominal motor size = 1 HP. 2. Total Static Pressure (TSP) = Internal Static Pressure + External Static Pressure (ESP) 3. ESP = TSP – Internal SP

1.50” RPM 1600 1612 1616 1619 1627 1586 1576 1679 1689 1710 1200 1225 1274 1290 1343 1148 1155 1176 1208 1241 948 972 998 1030 1066 991 1020 1057 1107 1159 937 945 952 968 985 903 910 926 941 959

www.titus-hvac.com | www.titus-energysolutions.com

HAB HORIZONTAL BELT DRIVE

W11


www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

W

HAB HORIZONTAL BELT DRIVE

Model

HAB08

HAB12

HAB16

HAB20

HAB30

HAB40

HAB60

PERFORMANCE DATA

HAB80

W12

Air Handlers

ISP

CFM

0.25 0.31 0.39 0.47 0.56 0.28 0.36 0.44 0.51 0.61 0.39 0.50 0.62 0.76 0.90 0.34 0.44 0.55 0.66 0.68 0.32 0.41 0.51 0.62 0.73 0.33 0.42 0.53 0.65 0.78 0.50 0.58 0.68 0.78 0.89 0.47 0.53 0.59 0.68 0.76

600 700 800 900 1000 900 1050 1200 1350 1500 1200 1400 1600 1800 2000 1500 1750 2000 2250 2500 2250 2625 3000 3375 3750 3000 3500 4000 4500 5000 5000 5500 6000 6500 7000 7000 7500 8000 8500 9000

Air Volume Capacity - 4-Pipe, 4-Row Cooling and 0.25” ESP 0.50” ESP 0.75” ESP RPM BHP RPM BHP RPM BHP 838 0.12 1020 0.18 1180 0.25 888 0.15 1054 0.22 1193 0.27 951 0.20 1107 0.27 1242 0.34 1015 0.26 1162 0.31 1300 0.39 1082 0.31 1220 0.39 1346 0.47 865 0.18 1092 0.26 1318 0.40 927 0.24 1133 0.32 1339 0.44 1009 0.31 1174 0.39 1339 0.52 1092 0.38 1236 0.49 1391 0.60 1174 0.50 1318 0.63 1442 0.73 735 0.29 826 0.35 951 0.45 797 0.39 899 0.48 990 0.58 870 0.53 965 0.63 1050 0.75 956 0.71 1034 0.82 1120 0.94 1033 0.92 1106 1.04 1185 1.18 683 0.32 797 0.40 902 0.52 735 0.42 845 0.53 938 0.64 794 0.57 899 0.68 985 0.81 862 0.75 955 0.88 1037 1.02 916 0.93 1011 1.09 1085 1.24 564 0.43 659 0.56 746 0.70 619 0.62 707 0.76 784 0.92 671 0.84 753 1.02 830 1.19 735 1.15 805 1.33 874 1.52 7790 1.49 859 1.70 921 1.90 646 0.72 722 0.88 801 1.05 711 1.07 789 1.32 849 1.50 783 1.57 853 1.80 909 1.97 859 2.12 918 2.36 974 2.59 927 2.76 986 3.08 1039 3.33 561 1.07 666 1.31 744 1.56 609 1.29 688 1.57 762 1.87 645 1.57 719 1.89 788 2.21 679 1.90 747 2.23 813 2.53 715 2.27 779 2.59 842 2.90 589 1.71 666 2.06 735 2.38 616 2.04 691 2.37 754 2.69 644 2.36 712 2.70 772 3.03 677 2.69 742 3.11 800 3.52 711 3.22 768 3.71 825 4.19

2-Row Heating Coils 1.00” ESP 1.25” ESP RPM BHP RPM BHP 1347 0.30 1514 0.38 1352 0.34 1505 0.43 1377 0.39 1505 0.45 1417 0.47 1526 0.54 1456 0.54 1569 0.62 1463 0.48 1607 0.59 1524 0.58 1658 0.71 1504 0.62 1689 0.80 1524 0.72 1669 0.84 1566 0.84 1689 0.97 1041 0.55 1129 0.63 1086 0.67 1172 0.78 1124 0.82 1208 0.96 1193 1.06 1258 1.17 1251 1.29 1318 1.42 998 0.62 1094 0.73 1030 0.75 1120 0.89 1071 0.94 1149 1.07 1114 1.16 1194 1.33 1162 1.40 1233 1.55 823 0.83 899 0.97 857 1.06 923 1.21 898 1.37 959 1.53 935 1.71 999 1.91 981 2.10 1039 2.31 871 1.23 947 1.41 916 1.71 980 1.92 968 2.15 1032 2.41 1030 2.82 1090 3.11 1089 3.59 1142 3.84 818 1.84 896 2.14 835 2.18 907 2.49 857 2.51 922 2.82 878 2.85 941 3.24 904 3.31 964 3.74 798 2.68 862 3.00 815 3.00 876 3.44 833 3.45 893 3.87 858 3.87 917 4.54 881 4.68 938 5.21

Notes: 1. Motor HP = 1.15* x BHP * In the absence of a specified drive loss factor, use 1.15. To select motor size, find the Brake Horsepower (BHP) for the design cfm and External Static Pressure (ESP). Multiply BHP by 1.15 (or specified factor) and round up to next size motor. Example: 1600 cfm at 0.75-inch ESP requires 0.70 BHP. 1.15 x 0.70 = 0.805. Round up to nearest nominal motor size = 1 HP. 2. Total Static Pressure (TSP) = Internal Static Pressure + External Static Pressure (ESP) 3. ESP = TSP – Internal SP

1.50” RPM 1642 1639 1633 1641 1669 1710 1772 1833 1844 1792 1211 1255 1295 1333 1382 1192 1200 1227 1265 1298 966 993 1021 1056 1097 1008 1045 1088 1141 1193 960 970 985 1002 1021 924 936 951 976 993

ESP BHP 0.47 0.49 0.55 0.60 0.71 0.68 0.81 0.96 1.05 1.08 0.73 0.90 1.11 1.31 1.56 0.87 1.03 1.21 1.46 1.69 1.12 1.39 1.70 2.09 2.54 1.59 2.09 2.63 3.35 4.09 2.47 2.80 3.17 3.69 4.19 3.44 3.85 4.39 5.16 5.85


Air Handlers

PERFORMANCE DATA

Discharge Plenum Static Loss Model

cfm

HAB08

800

HAB12 1200 HAB16 1600 HAB20 2000 HAB30 3000 HAB40 4000 HAB60 6000 HAB80 8000

Model HAB08

HAB12

HAB16

HAB20

Deflection (Degrees)

Throw (Feet)

Static Pressure (I.W.G.)

0

50 37 69 52 79 59 89 66 124 93 103 77 124 93 92 69

0.02 0.04 0.05 0.09 0.03 0.05 0.05 0.09 0.05 0.09 0.10 0.16 0.09 0.14 0.06 0.10

45

0 45

0 45

0 45

0 45

0 45

0 45

0 45

Mixing Box Static Pressure cfm Static Range Pressure 600 0.01 800 0.02 1000 0.03 900 0.02 1200 0.04 1500 0.07 1200 0.02 1600 0.03 2000 0.04 1500 0.02 2000 0.04 2500 0.07

Drop (Inches W.G.) cfm Static Model Range Pressure 2250 0.03 HAB30 3000 0.05 3750 0.08 3000 0.05 HAB40 4000 0.09 5000 0.14 5000 0.09 HAB60 6000 0.12 7000 0.17 7000 0.13 HAB80 8000 0.17 9000 0.21

www.titus-hvac.com | www.titus-energysolutions.com

HAB HORIZONTAL BELT DRIVE

W

PERFORMANCE DATA W13


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

OPTIONAL ACCESSORIES

W

HAB HORIZONTAL BELT DRIVE Supply Air Plenum

Supply Air Plenum with Adjustable 4-Way Grille Model HAB 08/12 HAB 16/20 HAB 30/40 HAB 60/80

A 39.0 48.0 57.0 72.0

B 6.0

C 20.0 24.5 36.6 47.0

12 16 18 16

Grille x 20 4-W x 24 4-W x 48 4-W x 24 4-W

All dimensions shown are approximate and rounded, subject to change without notice.

Return Air Plenum

Return Air Plenum units with Fixed Return Grille Model HAB 08/12 HAB 16/20 HAB 30/40 HAB 60/80

A 39.0 48.0 57.0 72.0

B 2.0

C 20.0 24.5 36.6 47.0

OPTIONAL ACCESSORIES

All dimensions shown are approximate and rounded, subject to change without notice.

W14


OPTIONAL ACCESSORIES

Mixing Box All Sizes

www.titus-hvac.com | www.titus-energysolutions.com

HAB HORIZONTAL BELT DRIVE

Air Handlers

W Mixing Box All Sizes

OPTIONAL ACCESSORIES W15


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

OPTIONAL ACCESSORIES

OPTIONAL ACCESSORIES

W

W16

HAB HORIZONTAL BELT DRIVE MIXING BOX DIMENSIONS Model

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

HAB 08

39.0

30.5

28.5

14.25

5.0

5.25

28.5

20.0

14.25

5.25

2.9

1.0

18.4

6.0

16.0

HAB 12

39.0

30.5

28.5

14.25

5.0

5.25

28.5

20.0

14.25

5.25

2.9

1.0

18.4

6.0

16.0

HAB 16

48.0

30.0

36.5

17.25

4.2

5.75

36.5

24.5

17.25

5.75

3.7

1.0

16.75

7.7

20.5

HAB 20

48.0

30.0

36.5

17.25

4.2

5.75

36.5

24.5

17.25

5.75

3.7

1.0

16.75

7.7

20.5

HAB 30

63.0

41.5

36.5

22.25

4.5

10.25

57.0

36.7

22.25

10.25

7.2

1.0

23.6

11.8

32.7

HAB 40

63.0

41.5

36.5

22.25

4.5

10.25

57.0

36.7

22.25

10.25

7.2

1.0

23.6

11.8

32.7

HAB 60

72.0

41.5

51.5

24.5

4.5

10.25

51.5

47.0

32.6

10.25

7.2

1.0

23.6

11.8

42.0

HAB 80

72.0

41.5

51.5

24.5

4.5

10.25

51.5

47.0

32.6

10.25

7.2

1.0

32.6

11.8

42.0


Air Handlers

Available Models: VAB08 VAB12 VAB16 VAB20 VAB30 VAB40

• 800 cfm • 1200 cfm • 1600 cfm • 2000 cfm • 3000 cfm • 4000 cfm

Each vertical blower coil unit provides flexibility of design due to belt-driven fans, multi-row coil capacity, and available factory options. These products are designed for the common areas and large meeting rooms in hotels, motels, apartment complexes, condominiums, schools, universities, hospitals, and nursing homes.

STANDARD FEATURES INCLUDE

• ETL-listed. Constructed in compliance with ANSI/UL 1995 Standard. • High efficiency coil – 4-row seamless 3/8-inch OD (VAB 08 & 12), ½-inch OD (VAB 16 & 20), and 5/8-inch OD (VAB 30 & 40) copper tubes with 10 aluminum fins per inch for 2-pipe applications. • Pipe entry is left hand as you are looking at the front of the unit. • Manual air vent. • Permanently lubricated ball bearing blowers. Blower wheels are belt-drive, double-inlet, forward-curved and factory balanced. • Condensate pan fabricated from 304 stainless steel. • Cabinet fabricated of heavy gauge galvanealed steel, specially coated on the outside with powdercoated enamel paint and lined with ¾-inch, dual density, 1.5-pound fiberglass insulation. • Large, easy to remove access panels are located on the front of each unit. • Filters are 2-inch fiberglass disposable with front access.

VAB

OPTIONAL FEATURES INCLUDE

• High efficiency coils –Hot water 1- (VAB 08, 12, 16, & 20 only) or 2-row seamless 3/8-inch OD (VAB 08 & 12), ½-inch OD (VAB 16 & 20), and 5/8-inch OD (VAB 30 & 40) copper tubes with 10 aluminum fins per inch installed in re-heat or pre-heat configurations. • Motors - Standard ETL-listed motors consist of Totally Enclosed, Fan Cooled (TEFC) and Open, Drip-Proof (ODP) casing, shaded-pole 115/60/1 in ¼ HP through 2 HP; TEFC and ODP 115/208-230/1 (wired for 115V) in 1/4 to 2 HP; TEFC and ODP 208-230/460/60/3 in ¼ HP to 5 HP; TEFC and ODP 575/60/3 in ¼ HP to 5 HP; other voltages, configurations, and horsepower options available, but not ETL-listed. All motor sheaves are variable-pitch and single-groove. Blower pulleys are split-tapered bushing. • Discharge or return plenum with front or rear opening (grilles field supplied and installed). • Pleated filter, 2-inch. • Cabinet liner in closed cell insulation. • Electric heat.

www.titus-hvac.com | www.titus-energysolutions.com

Vertical Air Handler Belt Drive Series VAB

W

VAB W17


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS VAB VERTICAL BELT DRIVE

DIMENSIONS

W

W18

Model

A

B

C

D

E

F

G

H

I

VAB 08

56.0

22.0

26.0

18.0

22.0

9.1

11.1

5.9

7.9

VAB 12

56.0

22.0

26.0

18.0

22.0

12.7

11.1

5.9

7.9

VAB 16

64.0

30.0

26.0

26.0

22.0

14.0

12.3

9.5

7.5

VAB 20

64.0

30.0

26.0

26.0

22.0

16.5

14.5

7.5

5.5

VAB 30

75.0

52.0

30.0

48.0

26.0

19.5

16.8

18.0

7.0

VAB 40

75.0

52.0

30.0

48.0

26.0

19.5

16.8

18.0

7.0

All dimensions are in inches.


Air Handlers

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

VAB VERTICAL BELT DRIVE VAB Coil Specifications Model

8

12

16

20

30 40

Fin Block HxW

Coil Type

Face Area

Rows

14 X 20

HW

1.94

1

14 X 20

HW

1.94

2

(2) 12 X 16

CW

2.66

4

14 X 20

HW

1.94

1

14 X 20

HW

1.94

2

(2) 12 X 16

CW

3

4

18 X 20

HW

2.5

1

18 X 20

HW

2.5

2

(2) 15 X 18

CW

3.75

4

22.5 X 20

HW

3.47

1

Water Conn. Header OD 5

/8”

7

/8”

7

/8”

7

/8”

11/8”

22.5 X 20

HW

3.47

2

(2) 15 X 23

CW

4.79

4

39 X 22

HW

5.95

2

13/8”

(2) 15 X 33

CW

6.88

4

11/8”

43.5 X 22

HW

6.65

2

13/8”

(2) 15 X 45

CW

9.38

4

11/8”

Note: Standard filter rack only accepts 2” TA or Pleated filters. Double wall filter rack accepts 2” or 4” TA or pleated filters.

7

/8”

Filter Quantity

Unit Model Filter

W

12”

X

24”

X

2/4”

20”

X

25”

X

2/4”

Filter Total

8

12

16

20

2

2

3

3

2

2

2

3

30

40

4

4

4

4

DIMENSIONS

All dimensions are in inches.

W19


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

W

VAB VERTICAL BELT DRIVE Standard Ratings - Water Coil Model

EWT gpm PD Ft.

VAB08

45

4.8

4.1

VAB12

45

7.2

5.8

VAB16

45

9.6

6.5

VAB20

45

12

6.1

VAB30

45

18

8.3

VAB40

45

24

7.6

cfm 600 800 1000 900 1200 1500 1200 1600 2000 1500 2000 2500 2250 3000 3750 3000 4000 5000

2- or 4- Pipe Cooling 80F DB / 67F WB TTL mbh SENS mbh LAT DB LAT WB 21.2 15.2 56.6 55.7 23.6 18.0 59.2 57.7 25.6 20.4 61.1 59.1 31.8 22.8 56.5 55.7 35.8 27.2 59.0 57.7 38.5 31.0 60.9 59.0 43.0 30.6 56.4 55.5 48.5 36.8 58.8 57.5 52.5 41.5 60.8 58.9 54.5 38.5 56.1 55.3 61.5 46.0 58.6 57.3 66.0 52.5 60.5 58.7 82.0 58.0 56.2 55.3 92.0 69.0 58.7 57.3 100 78.0 60.9 58.7 103 74.0 57.2 56.0 117 88.0 59.5 57.9 127 101 61.3 59.1

F 53.9 54.9 55.7 53.9 55.0 55.8 54.0 55.1 56.0 54.1 55.3 56.2 54.1 55.3 56.1 53.6 54.8 55.6 

2-Pipe Heating 60F EAT gpm PD Ft. cfm TTL mbh 600 60.5 4.8 3.6 800 72.0 1000 81.0 900 90.0 7.2 5.2 1200 108 1500 122 1200 121 9.6 5.8 1600 145 2000 164 1500 153 12 5.3 2000 183 2500 207 2250 228 18 7.2 3000 273 3750 309 3000 290 24 6.6 4000 348 5000 396

/ 180F LAT 153.3 143.1 135 153.2 143.5 135.5 153.5 143.8 135.8 154.3 144.7 136.7 153.7 144.1 136.2 149.3 140.5 133.2

EWT LWT 154.2 149.4 145.5 154.2 149.2 145.2 154.2 149.1 145.1 153.9 148.8 144.7 154.1 149 144.9 155.3 150.3 146.3

Note: Standard ratings are for sea level altitude, standard 4-row coils, nominal air volumes and ordinary water. For other conditions and/or other coolants, consult Titus.

PERFORMANCE DATA

Model

W20

gpm PD Ft.

VAB08

3

3.4

VAB12

4

6

VAB16

6

2.5

cfm 600 800 1000 900 1200 1500 1200 1600 2000

Standard Ratings - 2-Row Heating Coil 60F EAT / 180F EWT Model gpm PD Ft. TTL mbh LAT LWT 38.5 44.0 48.5 49.0 56.0 61.0 62.0 70.0 77.0

119.3 111.2 105.2 110.5 103.1 97.8 108.0 100.9 95.8

153.8 149.8 146.7 154.9 151.4 148.6 158.7 155.9 153.6

VAB20

12

2

VAB30

18

3.8

VAB40

20

5.1

60F EAT / 180F EWT cfm 1500 2000 2500 2250 3000 3750 3000 4000 5000

TTL mbh

LAT

LWT

83 95 104 137 158 175 184 213 236

111.2 103.9 98.7 116.3 108.7 103.2 116.9 109.3 103.7

165.8 163.8 162.1 164.4 162.0 160.1 161.1 158.2 155.8


Air Handlers

PERFORMANCE DATA

Air Volume Capacity (4 Row CW Coil) Vertical Belt Drive Air Handler Model VAB08

VAB12

VAB16

VAB20

VAB30

VAB40

ISP

CFM

0.12 0.15 0.18 0.23 0.27 0.23 0.29 0.36 0.44 0.52 0.18 0.24 0.30 0.37 0.44 0.17 0.20 0.29 0.35 0.43 0.18 0.24 0.31 0.38 0.46 0.18 0.23 0.30 0.37 0.44

600 700 800 900 1000 900 1050 1200 1350 1500 1200 1400 1600 1800 2000 1500 1750 2000 2250 2500 2250 2625 3000 3375 3750 3000 3500 4000 4500 5000

0.25” ESP RPM BHP 726 779 797 892 645 698 751 787 669 542 597 667 682 449 484 530 571 453 489 533 -

0.08 0.13 0.16 0.23 0.15 0.21 0.29 0.31 0.22 0.23 0.32 0.47 0.55 0.29 0.39 0.58 0.77 0.42 0.59 0.82 -

0.50” ESP RPM BHP 896 935 958 996 1042 1095 1163 800 837 877 911 805 666 910 775 817 703 742 613 648 686 571 608 616 652 688

0.11 0.15 0.19 0.24 0.30 0.38 0.48 0.22 0.29 0.37 0.40 0.30 0.32 0.53 0.60 0.75 0.51 0.66 0.72 0.93 1.18 0.64 0.89 1.01 1.32 1.68

0.75” ESP RPM BHP 1051 1076 1109 1159 1121 1096 1143 1180 1223 1268 938 1125 995 1027 1073 931 777 1013 1061 910 809 841 689 718 752 650 681 721 723 755

0.15 0.19 0.24 0.30 0.32 0.27 0.31 0.38 0.47 0.56 0.29 0.42 0.46 0.49 0.70 0.38 0.42 0.64 0.81 0.90 0.64 0.80 0.87 1.09 1.36 0.79 1.06 1.40 1.54 1.92

1.00” ESP RPM BHP 1192 1209 1232 1272 1247 1228 1258 1308 1344 1382 1217 1249 1289 1320 1169 1049 1064 1112 1152 998 906 932 971 785 814 723 749 783 820 818

0.19 0.24 0.28 0.35 0.39 0.33 0.42 0.46 0.55 0.66 0.40 0.51 0.63 0.65 0.81 0.47 0.58 0.74 0.92 1.06 0.78 0.95 1.28 1.26 1.55 0.94 1.23 1.60 2.04 2.17

1.25” ESP RPM BHP 1332 1349 1380 1365 1350 1374 1406 1457 1490 1342 1367 1398 1428 1262 1159 1168 1206 1239 1080 997 1018 1050 847 873 791 813 843 876 911

0.28 0.34 0.40 0.45 0.39 0.49 0.60 0.75 0.49 0.6 0.73 0.75 0.92 0.56 0.68 0.85 1.04 1.22 0.93 1.11 1.46 1.43 1.73 1.09 1.40 1.79 2.25 2.79

1.50” ESP RPM BHP 1449 1460 1485 1476 1464 1482 1510 1545 1593 1563 1503 1532 1578 1265 1298 1324 1159 1082 1100 1125 1155 1190 856 873 900 929 961

0.33 0.39 0.46 0.52 0.46 0.56 0.68 0.82 0.86 0.77 0.83 0.86 1.18 0.79 0.97 1.16 1.38 1.08 1.27 1.64 2.00 2.43 1.25 1.58 1.99 2.47 3.03

www.titus-hvac.com | www.titus-energysolutions.com

VAB VERTICAL BELT DRIVE

W

Air Volume Capacity (4 Row CW Coil - 2 Row HW Coil) Vertical Belt Drive Air Handler MODEL VAB08

VAB12

VAB16

VAB20

VAB40

CFM

0.18 0.23 0.29 0.36 0.42 0.36 0.46 0.58 0.70 0.83 0.32 0.42 0.53 0.65 0.78 0.30 0.37 0.51 0.62 0.75 0.28 0.37 0.47 0.58 0.70 0.31 0.40 0.52 0.70 0.77

600 700 800 900 1000 900 1050 1200 1350 1500 1200 1400 1600 1800 2000 1500 1750 2000 2250 2500 2250 2625 3000 3375 3750 3000 3500 4000 4500 5000

0.25" ESP RPM BHP 768 770 875 945 1025 1100 1178 866 799 867 937 1009 741 804 897 784 843 490 536 584 633 683 530 584 611 680 775

0.09 0.11 0.16 0.22 0.29 0.38 0.49 0.22 0.27 0.36 0.49 0.63 0.26 0.36 0.52 0.61 0.79 0.34 0.48 0.67 0.90 1.18 0.58 0.84 0.98 1.37 1.73

0.50" ESP RPM BHP 934 981 1038 1029 1029 1098 1164 1228 1296 1019 1088 986 1099 1108 872 920 1001 1069 935 746 622 662 705 749 613 658 713 781 781

0.12 0.16 0.21 0.24 0.24 0.29 0.37 0.47 0.59 0.29 0.39 0.45 0.64 0.74 0.34 0.45 0.62 0.81 0.94 0.56 0.61 0.81 1.06 1.36 0.72 1.01 1.38 1.89 1.97

0.75" ESP RPM BHP 1086 1120 1164 1218 1271 1166 1219 1293 1348 1408 1158 1215 1280 1148 1203 994 1030 1100 1159 1226 848 892 734 772 812 689 728 776 838 876

0.16 0.20 0.26 0.32 0.40 0.30 0.39 0.45 0.56 0.68 0.37 0.48 0.62 0.69 0.85 0.42 0.55 0.73 0.93 1.18 0.70 0.93 0.96 1.22 1.54 0.87 1.17 1.57 2.10 2.63

1.00" ESP RPM BHP 1225 1249 1284 1329 1373 1293 1337 1393 1462 1515 1288 1335 1390 1451 1519 1107 1135 1195 1246 1306 943 772 1022 835 871 759 793 836 893 927

0.20 0.25 0.31 0.38 0.45 0.36 0.46 0.59 0.65 0.78 0.45 0.57 0.72 0.89 1.10 0.52 0.65 0.84 1.05 1.31 0.84 0.88 1.39 1.39 1.72 1.02 1.35 1.77 2.32 2.87

1.25" ESP RPM BHP 1370 1398 1435 1473 1410 1448 1497 1549 1617 1448 1495 1550 1610 1213 1235 1287 1331 1385 1032 1062 1098 1141 1188 825 854 893 946 977

0.30 0.36 0.43 0.51 0.43 0.54 0.67 0.82 0.89 0.66 0.82 1.00 1.22 0.61 0.75 0.95 1.17 1.44 0.99 1.25 1.57 1.96 2.42 1.17 1.52 1.96 2.54 3.11

1.50" ESP RPM BHP 1484 1507 1538 1569 1553 1597 1642 1694 1555 1595 1644 1699 1329 1375 1413 1461 1115 1140 1172 1210 1253 888 913 947 990 1025

0.35 0.41 0.49 0.58 0.61 0.75 0.91 1.09 0.76 0.93 1.12 1.35 0.86 1.07 1.30 1.58 1.14 1.42 1.76 2.16 2.64 1.33 1.70 2.16 2.74 3.35

Notes: 1. Motor HP = 1.15* x BHP * In the absence of a specified drive loss factor, use 1.15. To select motor size, find the Brake Horsepower (BHP) for the design cfm and External Static Pressure (ESP). Multiply BHP by 1.15 (or specified factor) and round up to next size motor. Example: 1600 cfm at 0.75-inch ESP requires 0.46 BHP. 1.15 x 0.46 = 0.529. Round up to nearest nominal motor size = 3/4 HP. 2. Total Static Pressure (TSP) = Internal Static Pressure + External Static Pressure (ESP) 3. ESP = TSP – Internal SP

PERFORMANCE DATA

VAB30

ISP

W21


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

OPTIONAL ACCESSORIES VAB VERTICAL BELT DRIVE

Supply Air Plenum

Supply Air Plenum with Adjustable 4-Way Grille Model VAB 08/12 VAB 16/20 VAB 30/40

A 22.0 30.0 52.0

B 26.0 26.0 30.0

C 20.0 20.0 20.0

Grille 12 x 20 4-W 16 x 24 4-W 18 x 48 4-W

All dimensions shown are approximate and rounded, subject to change without notice.

Return Air Plenum

Return Air Plenum units with Fixed Return Grille

Model VAB 08/12 VAB 16/20 VAB 30/40

W

A 22.0 30.0 52.0

B 26.0 26.0 30.0

C 20.0 20.0 20.0

All dimensions shown are approximate and rounded, subject to change without notice.

OPTIONAL ACCESSORIES

Mixing Box for Size 08 to 40

W22

Model

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

VAB 08

22.0

26.0

16.5

15.0

5.0

2.3

19.5

25.0

14.5

3.3

5.3

1.0

12.5

6.0

20.0

VAB 12

22.0

26.0

16.5

15.0

5.0

2.3

19.5

25.0

14.5

3.3

5.3

1.0

12.5

6.0

20.0

VAB 16

30.0

34.0

22.5

23.0

5.0

3.8

27.5

30.0

17.5

3.3

6.3

1.0

12.5

6.0

25.0

VAB 20

30.0

34.0

22.5

23.0

5.0

3.8

27.5

30.0

17.5

3.3

6.3

1.0

12.5

6.0

25.0

VAB 30

52.0

52.0

39.5

45.0

5.0

6.3

45.5

35.0

22.5

3.3

6.3

1.0

16.5

6.0

30.0

VAB 40

52.0

52.0

39.5

45.0

5.0

6.3

45.5

35.0

22.5

3.3

6.3

1.0

16.5

6.0

30.0


• 800 cfm • 1200 cfm • 1600 cfm • 2000 cfm • 3000 cfm • 4000 cfm • 6000 cfm • 8000 cfm

Each modular blower coil unit provides flexibility of design due to belt driven fans, multi-row coil capability, and available factory options. These products are designed for the common areas and large meeting rooms in hotels, motels, apartment complexes, condominiums, schools, universities, hospitals, and nursing homes.

STANDARD FEATURES INCLUDE

• ETL-listed. Constructed in compliance with ANSI/UL 1995 Standard. • High efficiency coil – 4-row seamless 3/8-inch OD (MAB 08 & 12), ½-inch OD (MAB 16 & 20), and 5/8-inch OD (MAB 30 thru 80) copper tubes with 10 aluminum fins per inch for 2-pipe applications. • Pipe entry is right hand on the side of the cabinet as you are looking at the filter (in the direction of the airflow). • Manual air vent. • Permanently lubricated ball bearing blowers. Blower wheels are belt-drive, double-inlet, forward-curved, and factory balanced. • Condensate pan fabricated of heavy gauge 304 stainless steel with three-dimensional slope for positive drainage. • Cabinet fabricated of heavy gauge galvanealed steel, specially coated on the outside with powdercoated enamel paint and lined with ¾-inch, dual density, 1.5-pound fiberglass insulation with antimicrobial coating on models MAB08 and 12. Models MAB08 and 12 are of one-piece construction, vertical fan discharge only. Models MAB16, 20, 30, 40, 60 and 80 are of two-piece construction with each piece individually packaged for shipment; optional fan discharge arrangements are achieved by field repositioning of the access panels. • Filters are 2-inch disposable with access on both sides of the cabinet.

MAB

Available Models: MAB08 MAB12 MAB16 MAB20 MAB30 MAB40 MAB60 MAB80

Air Handlers

OPTIONAL FEATURES INCLUDE

W

MAB

• High efficiency coil – 6-row seamless 3/8-inch OD (MAB08 & 12), ½-inch OD (MAB16 & 20), and 5/8inch OD (MAB30 thru 80) copper tubes with 10 aluminum fins per inch for 2-pipe applications. High efficiency coils – Chilled water 4- or 6-row seamless 3/8-inch OD (MAB08 & 12), ½-inch OD (MAB16 & 20), and 5/8-inch OD (MAB30 thru 80) copper tubes with 10 aluminum fins per inch. Hot water 1- (MAB08, 12, 16, & 20 only) or 2-row seamless 3/8-inch OD (MAB08 & 12), ½-inch OD (MAB16 & 20), and 5/8-inch OD (MAB30 thru 80) copper tubes with 10 aluminum fins per inch. • Left hand pipe entry as you are looking at the filter (in the direction of the air flow). • Motors - Standard ETL-listed motors consist of Totally Enclosed, Fan Cooled (TEFC) and Open, Drip-Proof (ODP) casing, shaded-pole 115/60/1 in ¼ HP through 2 HP; TEFC and ODP 115/208-230/1 (wired for 115V) in 1/4 to 2 HP; TEFC and ODP 208-230/460/60/3 in ¼ HP to 10 HP; TEFC and ODP 575/60/3 in ¼ HP to 10 HP; other voltages, configurations, and horsepower options available, but not ETL-listed. All motor sheaves are variable-pitch and singlegroove. Blower pulleys are split-tapered bushing. • Mixing boxes, field install. • Controls for mixing boxes, field install and wire, 3-position and fully modulating packages. Note: Controls such as contactors, starters, and/ or transformers/fan relays are supplied by others. • Discharge plenum with adjustable double-deflection grille, (cannot be used with electric heat). • Return air grille models. • Pleated filter, 2-inch. • Six-inch leg kit. • Cabinet liner in one-inch closed cell or oneinch IAQ fiberglass (models MAB16, 20, 30, 40, 60 and 80) insulation. Electric heat (models MAB16, 20, 30 and 40). • Downflow or horizontal arrangement.

www.titus-hvac.com | www.titus-energysolutions.com

Modular Air Handler Belt Drive Series MAB

W23


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS MAB MODULAR BELT DRIVE

DIMENSIONS

W

W24

Model

A

B

C

D

E

F

G

H

J

K

L

M

N

P

Q

MAB 08

36.0

28.0

40.0

33.5

29.8

13.8

9.1

11.1

6.8

4.5

15.4

17.0

17.0

4.0

16.0

MAB 12

36.0

28.0

40.0

33.5

29.8

13.8

12.7

11.1

6.8

4.5

13.7

17.0

17.0

4.0

16.0

MAB 16

44.0

34.0

49.0

39.5

38.8

17.8

14.0

12.3

7.5

4.5

17.5

21.0

21.0

10.0

16.0

MAB 20

44.0

34.0

49.0

39.5

38.8

17.8

16.5

14.5

7.8

4.5

16.3

21.0

21.0

10.0

16.0

MAB 30

68.0

34.0

57.0

39.5

44.8

29.8

19.5

16.8

10.1

4.5

18.8

33.0

33.0

10.0

16.0

MAB 40

68.0

34.0

57.0

39.5

44.8

29.8

19.5

16.8

10.1

4.5

18.8

33.0

33.0

10.0

16.0

MAB 60

94.0

34.0

72.0

39.5

59.8

42.8

22.8

19.8

12.2

4.5

24.6

46.0

46.0

10.0

16.0

MAB 80

94.0

34.0

72.0

39.5

59.8

42.8

22.8

19.8

12.2

4.5

24.6

46.0

46.0

10.0

16.0

All dimensions are in inches.


Air Handlers

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

MAB MODULAR BELT DRIVE

W

DIMENSIONS

All dimensions are in inches.

W25


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS MAB MODULAR BELT DRIVE

DIMENSIONS

W

W26

All dimensions are in inches.


Air Handlers

PERFORMANCE DATA

Model

Standard Ratings - Water Coil 2- or 4-Pipe Cooling 80F DB / 67F WB EWT gpm PD Ft.

MAB08

45

6

5.7

MAB12

45

8

6.7

MAB16

45

10

6.4

MAB20

45

13

4.9

MAB30

45

18

6.5

MAB40

45

24

7.1

MAB60

45

32

6.5

MAB80

45

44

6.6

cfm 600 800 1000 900 1200 1500 1200 1600 2000 1500 2000 2500 2500 3000 3750 3000 4000 5000 5000 6000 7000 7000 8000 9000

TTL mbh 20.4 23 25 30.6 34.4 37.2 44 50 54.5 55 62.5 68 86 92 101 98 110 120 152 163 173 213 225 235

SENS LAT DB mbh 14.5 57.6 17.2 60.1 19.6 61.9 21.8 57.6 25.8 60.1 29.4 61.9 31.2 56 37.6 58.3 43 60.1 39 55.9 47 58.3 53.5 60.1 62.5 56.8 70 58.3 81 60 71 58 85 60.2 97 62 113 59 126 60.5 139 61.6 160 58.9 173 60 186 60.9

LAT WB 56.1 58 59.3 56.2 58 59.3 55.2 57.2 58.5 55.2 57.1 58.5 56 57.3 58.6 56.6 58.4 59.6 57.5 58.6 59.4 57.4 58.2 58.9

F

51.9 52.7 53.4 52.7 53.6 54.3 53.8 55 55.9 53.5 54.6 55.6 54.6 55.3 56.3 53.2 54.2 55 54.5 55.2 55.8 54.7 55.3 55.7

gpm PD Ft.

6

5.1

8

5.9

10

5.5

13

4.4

18

5.8

24

6.3

32

5.5

44

5.6

2-Pipe Heating 60F EAT / 180F EWT cfm TTL mbh LAT LWT 600 800 1000 900 1200 1500 1200 1600 2000 1500 2000 2500 2250 3000 3750 3000 4000 5000 5000 6000 7000 7000 8000 9000

57 68 77 85 102 115 123 148 170 154 186 213 232 280 319 281 335 380 447 499 544 628 680 728

147.9 138.6 131.2 148 138.6 131.1 154.9 145.9 138.5 155.1 146.1 138.7 155.4 146.4 138.7 146.5 137.5 130.3 142.7 136.8 131.8 142.8 138.5 134.7

160.5 156.8 153.8 158.1 153.9 150.6 154.8 149.6 145.3 155.7 150.7 146.5 153.6 148.2 143.8 156.1 151.4 147.6 151.5 148.1 145.3 150.9 148.4 146.2

www.titus-hvac.com | www.titus-energysolutions.com

MAB MODULAR BELT DRIVE

W

Note: Standard ratings are for sea level altitude, standard 4-row coils, nominal air volumes and ordinary water. For other conditions and/or other coolants, consult Titus. Standard Ratings - 2-Row Heating Model

gpm PD Ft. 4

5.2

MAB12

6

4.1

MAB16

8

5.3

MAB20

12

6.9

LAT F 116 108.4 102.8 116.8 109.1 103.5 123.3 115 109.1 124.6 116.5 110.5

LWT F 161.4 158.6 156.3 161.1 158.3 155.9 159 155.6 152.9 162.1 159.2 156.7

Model

gpm PD Ft.

MAB30

12.8

5.7

MAB40

16.8

5.8

MAB60

19.2

4.3

MAB80

22.4

2.6

cfm TTL mbh 2250 146 3000 168 3750 187 3000 186 4000 215 5000 238 5000 283 6000 307 7000 328 7000 384 8000 408 9000 429

LAT F 119.9 112 106.1 117.4 109.6 104 112.2 107.3 103.4 110.7 107.1 104

LWT F 156.7 153.1 150.1 157.3 153.9 151.1 149.9 147.3 145 145 142.8 141

Note: Heating capacities are based on 60BF EAT and 180BF EWT. Units not recommended for heating applications when the LAT exceeds 130BF.

PERFORMANCE DATA

MAB08

cfm TTL mbh 600 36.2 800 41.5 1000 46 900 55 1200 63.5 1500 70 1200 82 1600 95 2000 106 1500 105 2000 122 2500 136

W27


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA MAB MODULAR BELT DRIVE

Model

MAB08

MAB12

MAB16

W

MAB20

MAB30

MAB40

MAB60

PERFORMANCE DATA

MAB80

W28

ISP

CFM

0.20 0.26 0.31 0.38 0.45 0.20 0.27 0.33 0.39 0.48 0.35 0.38 0.41 0.45 0.49 0.35 0.38 0.41 0.45 0.49 0.18 0.24 0.30 0.37 0.45 0.30 0.39 0.49 0.61 0.75 0.33 0.40 0.45 0.52 0.60 0.38 0.42 0.48 0.54 0.60

600 700 800 900 1000 900 1050 1200 1350 1500 1200 1400 1600 1800 2000 1500 1750 2000 2250 2500 2250 2625 3000 3375 3750 3000 3500 4000 4500 5000 5000 5500 6000 6500 7000 7000 7500 8000 8500 9000

0.25” ESP RPM BHP 669 0.08 720 0.11 764 0.14 818 0.19 872 0.24 719 0.15 793 0.22 861 0.30 929 0.41 1010 0.54 775 0.20 815 0.30 855 0.40 905 0.50 970 0.65 815 0.35 860 0.45 925 0.65 1005 0.80 1080 1.05 448 0.33 487 0.42 525 0.54 559 0.69 597 0.87 521 0.56 569 0.74 619 1.00 674 1.39 733 1.78 514 0.88 546 1.08 567 1.28 593 1.58 625 1.86 564 1.60 587 1.89 614 2.19 642 2.54 672 2.92

Air Volume Capacity 0.50” ESP RPM BHP 823 0.11 862 0.15 897 0.19 943 0.24 988 0.29 855 0.20 915 0.28 972 0.37 1031 0.48 1103 0.62 910 0.30 940 0.40 975 0.50 1010 0.65 1060 0.80 930 0.40 975 0.55 1025 0.70 1090 0.90 1160 1.15 563 0.46 585 0.56 611 0.69 636 0.84 671 1.04 607 0.78 646 0.90 692 1.18 740 1.55 791 2.00 613 1.07 629 1.36 648 1.60 671 1.89 705 2.24 640 1.96 660 2.21 686 2.54 702 2.90 733 3.39

- 2-Pipe, 4-Row Coil 0.75” ESP 1.00” ESP RPM BHP RPM BHP 956 0.15 988 0.19 1101 0.24 1017 0.24 1125 0.29 1055 0.29 1159 0.34 1095 0.35 1194 0.41 975 0.25 1085 0.30 1026 0.33 1129 0.39 1075 0.43 1172 0.50 1127 0.55 1218 0.62 1192 0.70 1277 0.78 1045 0.35 1160 0.45 1060 0.46 1175 0.55 1080 0.60 1195 0.70 1115 0.75 1220 0.85 1155 0.90 1250 1.00 1025 0.50 1155 0.60 1065 0.65 1175 0.75 1115 0.80 1210 0.90 1170 1.05 1250 1.15 1225 1.25 1310 1.35 681 0.70 697 0.84 771 1.01 717 1.00 788 1.17 741 1.21 808 1.39 693 0.84 769 1.00 722 1.09 786 1.30 755 1.36 820 1.55 802 1.77 850 1.98 849 2.22 907 2.51 689 1.50 766 1.82 711 1.64 782 1.94 725 1.91 793 2.22 746 2.22 811 2.53 766 2.55 833 2.86 712 2.27 776 2.58 728 2.52 790 2.83 749 2.89 809 3.27 769 3.36 827 3.86 791 3.87 846 4.36

1.25” RPM 1225 1255 1287 1187 1225 1262 1304 1358 1225 1240 1260 1290 1320 1240 1260 1285 1335 1410 858 876 843 852 885 921 967 842 854 885 921 967 839 850 867 884 902

ESP BHP 0.34 0.40 0.47 0.36 0.45 0.57 0.70 0.86 0.55 0.65 0.80 0.90 1.10 0.70 0.85 1.05 1.25 1.45 1.33 1.59 1.16 1.51 1.77 2.42 2.77 1.93 2.26 2.52 2.84 3.26 2.90 3.25 3.68 4.36 4.84

1.50” RPM 1319 1346 1374 1281 1315 1348 1386 1435 1325 1335 1350 1370 1400 1340 1365 1390 1420 1450 936 917 928 950 979 1017 918 923 928 939 955 903 910 926 941 959

ESP BHP 0.39 0.46 0.53 0.42 0.52 0.63 0.77 0.94 0.65 0.75 0.95 1.05 1.20 0.80 0.95 1.15 1.35 1.60 1.80 1.31 1.60 1.98 2.64 3.00 2.26 2.58 2.82 3.22 3.00 3.29 3.68 4.21 4.86 5.44

Notes: 1. Motor HP = 1.15* x BHP * In the absence of a specified drive loss factor, use 1.15. To select motor size, find the Brake Horsepower (BHP) for the design cfm and External Static Pressure (ESP). Multiply BHP by 1.15 (or specified factor) and round up to next size motor. Example: 1600 cfm at 0.75-inch ESP requires 0.46 BHP. 1.15 x 0.46 = 0.529. Round up to nearest nominal motor size = 3/4 HP. 2. Total Static Pressure (TSP) = Internal Static Pressure + External Static Pressure (ESP) 3. ESP = TSP – Internal SP


PERFORMANCE DATA

Air Handlers

Model

MAB08

MAB12

MAB16

MAB20

MAB30

MAB40

MAB60

MAB80

ISP

CFM

0.25 0.31 0.39 0.47 0.56 0.28 0.36 0.44 0.51 0.61 0.40 0.44 0.49 0.55 0.61 0.40 0.44 0.49 0.55 0.61 0.23 0.31 0.38 0.48 0.57 0.38 0.50 0.64 0.79 0.97 0.44 0.52 0.60 0.69 0.79 0.47 0.53 0.59 0.68 0.76

600 700 800 900 1000 900 1050 1200 1350 1500 1200 1400 1600 1800 2000 1500 1750 2000 2250 2500 2250 2625 3000 3375 3750 3000 3500 4000 4500 5000 5000 5500 6000 6500 7000 7000 7500 8000 8500 9000

Air Volume Capacity - 4-Pipe, 4-Row Cooling and 2-Row Heating Coils 0.25” ESP 0.50” ESP 0.75” ESP 1.00” ESP 1.25” RPM BHP RPM BHP RPM BHP RPM BHP RPM 702 0.09 851 0.12 980 0.16 750 0.12 889 0.16 1011 0.20 1122 0.25 808 0.16 937 0.20 1052 0.25 1158 0.30 1256 865 0.20 984 0.26 1094 0.31 1194 0.36 1288 924 0.26 1036 0.32 1139 0.38 1235 0.44 1325 764 0.17 895 0.22 1012 0.27 1119 0.32 1218 838 0.24 956 0.30 1064 0.36 1164 0.42 1258 911 0.33 1018 0.40 1118 0.46 1212 0.53 1301 979 0.44 1078 0.51 1171 0.58 1260 0.66 1343 1059 0.58 1150 0.66 1237 0.74 1319 0.82 1398 795 0.25 930 0.35 1070 0.40 1185 0.50 1255 835 0.35 960 0.45 1085 0.50 1200 0.60 1280 885 0.45 995 0.55 1105 0.65 1220 0.75 1305 925 0.55 1030 0.70 1140 0.80 1245 0.90 1335 990 0.70 1080 0.85 1180 0.95 1275 1.05 1365 835 0.40 950 0.45 1050 0.55 1180 0.65 1270 880 0.50 995 0.60 1090 0.70 1200 0.80 1300 945 0.65 1045 0.75 1140 0.85 1235 0.95 1330 1025 0.85 1110 0.95 1195 1.10 1275 1.20 1380 1100 1.10 1180 1.20 1250 1.30 1335 1.40 1455 474 0.35 583 0.48 688 0.61 769 0.73 850 519 0.46 615 0.59 706 0.73 776 0.89 861 549 0.58 637 0.73 720 0.89 793 1.05 865 597 0.76 675 0.92 748 1.08 818 1.25 889 632 0.95 705 1.12 773 1.30 841 1.48 907 548 0.58 634 0.74 718 0.89 793 1.05 867 603 0.80 681 0.97 752 1.14 821 1.32 889 662 1.12 731 1.30 795 1.48 859 1.69 923 720 1.49 781 1.71 843 1.92 902 2.15 962 782 1.97 841 2.23 900 2.50 952 2.76 1011 556 1.00 644 1.25 724 1.50 800 1.79 876 585 1.17 669 1.45 746 1.78 817 2.05 889 616 1.49 697 1.79 766 2.10 834 2.40 903 651 1.80 724 2.12 789 2.43 855 2.74 920 688 2.15 753 2.16 815 2.47 878 2.78 939 589 1.71 666 2.06 735 2.38 798 2.68 862 616 2.04 691 2.37 754 2.69 815 3.00 876 644 2.36 712 2.70 772 3.03 833 3.45 893 677 2.69 742 3.11 800 3.52 858 3.87 917 711 3.22 768 3.71 825 4.19 881 4.68 938

ESP BHP 0.36 0.42 0.50 0.38 0.48 0.60 0.72 0.90 0.65 0.75 0.90 1.00 1.20 0.80 0.95 1.15 1.35 1.65 0.89 1.05 1.21 1.41 1.70 1.22 1.49 1.91 2.41 3.00 2.07 2.37 2.70 3.07 3.56 3.00 3.44 3.87 4.54 5.21

1.50” RPM 1377 1411 1310 1346 1385 1423 1474 1355 1375 1395 1415 1445 1370 1450 1435 1465 1496 926 932 939 955 968 939 955 980 1016 1059 946 949 965 980 1000 924 936 951 976 993

ESP BHP 0.48 0.56 0.43 0.54 0.67 0.81 0.98 0.75 0.85 1.05 1.15 1.30 0.90 1.05 1.25 1.45 1.71 1.04 1.29 1.36 1.61 1.91 1.40 1.70 2.13 2.67 3.27 2.39 2.69 3.05 3.53 4.00 3.44 3.86 4.39 5.16 5.85

W

PERFORMANCE DATA

Notes: 1. Motor HP = 1.15* x BHP * In the absence of a specified drive loss factor, use 1.15. To select motor size, find the Brake Horsepower (BHP) for the design cfm and External Static Pressure (ESP). Multiply BHP by 1.15 (or specified factor) and round up to next size motor. Example: 1600 cfm at 0.75-inch ESP requires 0.46 BHP. 1.15 x 0.46 = 0.529. Round up to nearest nominal motor size = 3/4 HP. 2. Total Static Pressure (TSP) = Internal Static Pressure + External Static Pressure (ESP) 3. ESP = TSP – Internal SP

www.titus-hvac.com | www.titus-energysolutions.com

MAB MODULAR BELT DRIVE

W29


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

OPTIONAL ACCESSORIES MAB MODULAR BELT DRIVE

Supply Air Plenum

Supply Air Plenum with Adjustable 4-Way Grille

Model MAB 08/12 MAB 16/20 MAB 30/40 MAB 60/80

A 39.0 48.0 57.0 72.0

B

C 20.0 24.5 36.6 47.0

6.0

Grille x 20 4-W x 24 4-W x 48 4-W x 24 4-W

12 16 18 16

All dimensions shown are approximate and rounded, subject to change without notice.

Return Air Plenum

Return Air Plenum units with Fixed Return Grille Model MAB 08/12 HAB 16/20 HAB 30/40 HAB 60/80

W

A 39.0 48.0 57.0 72.0

B

C 20.0 24.5 36.6 47.0

2.0

All dimensions shown are approximate and rounded, subject to change without notice.

Note: Standard filter rack only accepts 2” TA or Pleated filters. Double wall filter rack accepts 2” or 4” TA or pleated filters.

Filter Quantity

Unit Model

Filter

8

14”

X

20”

X

2/4”

14”

X

25”

X

2/4”

16”

X

16”

X

2/4”

16”

X

20”

X

2/4”

20”

X

20”

X

2/4”

Filter Total

2 2

12

16

20

30

40

6

6

6

6

60

80

5

5

5

5

10

10

2 2

2

2

2

2

OPTIONAL ACCESSORIES

Water Coil Data Model

MAB08

MAB12

MAB16

Fin Block HxW

10 X 31

13 X 31

15 X 40

Face Area

2.15

2.8

4.17

Rows 1 2 4 6 1 2 4 6 1 2 4 6

W30

MAB20

17.5 X 40

4.86

1 2 4 6

Water Conn. Header OD

Model

Fin Block HxW

Face Area

MAB30

22.5 X 47

7.34

MAB40

28.5 X 47

9.3

/8

2

5

/8

7

/8 /8

7

/8

MAB60

31.5 X 60

13.13

/8

MAB80

42 X 60

17.5

7

/8

5

/8 1 1/8 7

4 6 2

5

5

Rows

4 6 2 4 6 2 4 6

Water Conn. Header OD /8

7

1 1/8 1 3/8 /8

7

1 1 1 1 1 1 1 2

/8 /8 1 /8 3 /8 5 /8 3 /8 5 /8 1 /8 1 3


Air Handlers

OPTIONAL ACCESSORIES

www.titus-hvac.com | www.titus-energysolutions.com

MAB MODULAR BELT DRIVE

W A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

39.0

30.5

28.5

14.25

5.0

5.25

28.5

20.0

14.25

5.25

2.9

1.0

18.4

6.0

16.0

MAB 12

39.0

30.5

28.5

14.25

5.0

5.25

28.5

20.0

14.25

5.25

2.9

1.0

18.4

6.0

16.0

MAB 16

48.0

30.0

36.5

17.25

4.2

5.75

36.5

24.5

17.25

5.75

3.7

1.0

16.75

7.7

20.5

MAB 20

48.0

30.0

36.5

17.25

4.2

5.75

36.5

24.5

17.25

5.75

3.7

1.0

16.75

7.7

20.5

MAB 30

63.0

41.5

36.5

22.25

4.5

10.25

57.0

36.7

22.25

10.25

7.2

1.0

23.6

11.8

32.7

MAB 40

63.0

41.5

36.5

22.25

4.5

10.25

57.0

36.7

22.25

10.25

7.2

1.0

23.6

11.8

32.7

MAB 60

72.0

41.5

51.5

24.5

4.5

10.25

51.5

47.0

32.6

10.25

7.2

1.0

23.6

11.8

42.0

MAB 80

72.0

41.5

51.5

24.5

4.5

10.25

51.5

47.0

32.6

10.25

7.2

1.0

32.6

11.8

42.0

OPTIONAL ACCESSORIES

Model MAB 08

W31


Available Models: RAB08 RAB12 RAB16 RAB20 RAB30 RAB40 RAB60 RAB80

• 800 cfm • 1200 cfm • 1600 cfm • 2000 cfm • 3000 cfm • 4000 cfm • 6000 cfm • 8000 cfm

Each rooftop blower coil unit provides flexibility of design due to belt driven fans, multi-row coil capability, and available factory options. These products are designed for the common areas and large meeting rooms in hotels, motels, apartment complexes, condominiums, schools, universities, hospitals, and nursing homes.

STANDARD FEATURES INCLUDE

RAB

W

W32

Air Handlers

• ETL-listed. Constructed in compliance with ANSI/UL 1995 Standard. • High efficiency coil – 4-row seamless 3/8-inch OD (RAB 08 & 12), ½-inch OD (RAB 16 & 20), and 5/8inch OD (RAB 30 thru 80) copper tubes with 10 aluminum fins per inch for 2-pipe applications. • Pipe entry is right hand looking at the filter in the direction of the airflow and can be field piped directly to the outside or down through the piping chase provided inside the unit for areas with severe winter conditions. • Manual air vent. • Blowers oriented in down discharge configuration and mounted on isolators. Blower wheels are belt-drive, double-inlet, forward-curved, and factory balanced. • Condensate pan fabricated of heavy gauge 304 stainless steel with three-dimensional slope for positive drainage. • Cabinet fabricated of heavy gauge galvanealed steel with baked-on powder-coated enamel coating providing maximum corrosion protection. Cabinet completely insulated with 1-inch, 1.5-pound fiberglass insulation. Top panel has two-inch insulation between double wall construction. • Filters are 2-inch fiberglass disposable.

RAB

www.titus-hvac.com | www.titus-energysolutions.com

Rooftop Air Handler Belt Drive Series RAB

OPTIONAL FEATURES INCLUDE

• High efficiency coil – 6-row seamless 3/8-inch OD (RAB08 & 12), ½-inch OD (RAB16 & 20), and 5/8inch OD (RAB30 thru 80) copper tubes with 10 aluminum fins per inch for 2-pipe applications. High efficiency coils – Chilled water 4- or 6-row seamless 3/8-inch OD (RAB08 & 12), ½-inch OD (RAB16 & 20), and 5/8-inch OD (RAB30 thru 80) copper tubes with 10 aluminum fins per inch. Hot water 1- (RAB08, 12, 16, & 20 only) or 2-row seamless 3/8-inch OD (RAB08 & 12), ½-inch OD (RAB16 & 20), and 5/8-inch OD (RAB30 thru 80) copper tubes with 10 aluminum fins per inch. • Motors - Standard ETL-listed motors consist of Totally Enclosed, Fan Cooled (TEFC) and Open, Drip-Proof (ODP) casing, shaded-pole 115/60/1 in ¼ HP through 2 HP; TEFC and ODP 115/208-230/1 (wired for 115V) in 1/4 to 2 HP; TEFC and ODP 208-230/460/60/3 in ¼ HP to 10 HP; TEFC and ODP 575/60/3 in ¼ HP to 10 HP; other voltages, configurations, and horsepower options available, but not ETL-listed. All motor sheaves are variable-pitch and singlegroove. Blower pulleys are split-tapered bushing. • Horizontal discharge configuration. • Modulating air damper economizer package for up to 100 percent outside air (available for down discharge or horizontal discharge configuration); includes weather hood, modulating control motor, enthalpy control, mixed air sensor, and transformer/relay for 208/230/1 motor. Shipped separate for field installation. • Manual air damper for up to 100 percent outside air includes weather hood. Shipped separate for field installation. • Motor drive kit for manual air damper. Shipped separate for field installation. • Pleated filter, 2-inch. • Double-wall construction. • Cabinet liner in 7/8-inch closed cell or 1-inch IAQ fiberglass insulation. • 14-inch high roof curb.


Air Handlers

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

RAB ROOFTOP BELT DRIVE

W Unit 08 12 16 20 30 40 60 80

A 68.0 68.0 73.0 73.0 76.0 76.0 76.0 97.0

B 40.0 40.0 49.0 49.0 54.0 54.0 54.0 77.0

C 23.0 23.0 29.0 29.0 43.0 43.0 56.0 54.0

D 12.0 12.0 12.0 12.0 14.0 14.0 14.0 15.0

E 26.0 26.0 34.0 34.0 44.0 44.0 44.0 63.0

Dimensions - Sizes 08 thru 80 F G H J 12.0 9.0 11.0 8.0 12.0 9.0 11.0 8.0 14.0 13.0 11.0 8.0 14.0 13.0 11.0 8.0 17.0 12.0 15.0 8.0 17.0 12.0 15.0 8.0 17.0 20.0 15.0 8.0 20.0 22.0 15.0 8.0

K 36.0 36.0 37.0 37.0 38.0 38.0 38.0 51.0

L 14.0 14.0 18.0 18.0 25.0 25.0 33.0 47.0

M 29.0 29.0 36.0 36.0 46.0 46.0 46.0 69.0

N 3.0 3.0 5.0 5.0 10.0 10.0 24.0 18.0

O 15.0 15.0 18.0 18.0 21.0 21.0 17.0 27.0

P 6.0 6.0 6.0 6.0 4.0 4.0 6.0 4.0

DIMENSIONS

All dimensions are in inches.

W33


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

DIMENSIONS RAB ROOF CURB

W A 64.1 64.1 64.1 64.1 68.5 68.5 71.8 87.8

B 36.3 36.3 36.3 36.3 44.8 44.8 49.8 67.5

Roof Curb Dimensions C D E 63.9 60.1 21.3 63.9 60.1 21.3 63.9 60.1 21.3 63.9 60.1 21.3 68.2 64.5 21.3 68.2 64.5 21.3 71.5 67.8 34.8 87.5 83.8 22.5

Sizes 08 F 7.4 7.4 7.4 7.4 11.6 11.6 7.4 22.4

thru 80 G 13.2 13.2 13.2 13.2 17.3 17.3 17.8 20.0

DIMENSIONS

Unit 08 12 16 20 30 40 60 80

W34

All dimensions are in inches.

H 12.6 12.6 12.6 12.6 12.6 12.6 15.5 16.8

J 32.3 32.3 32.3 32.3 40.8 40.8 45.8 63.5

K 36.0 36.0 36.0 36.0 44.5 44.5 49.5 67.3


Air Handlers

DIMENSIONS

www.titus-hvac.com | www.titus-energysolutions.com

RAB ROOFTOP BELT DRIVE Water Coil Data Model

RAB 08

RAB 12

Fin Block HxW

10 X 31

13 X 31

Face Area

2.15

2.8

Rows 1 2 4 6 1 2 4

Water Conn. Header OD

Fin Block HxW

Model

Face Area

/8

2

5

RAB 30

/8

7

22.5 X 47

7.34

/8

15 X 40

4.17

RAB 40

/8

7

28.5 X 47

9.3

4

17.5 X 40

4.86

Note: Standard filter rack only accepts 2” TA or Pleated filters. Double wall filter rack accepts 2” or 4” TA or pleated filters.

RAB 60

31.5 X 60

13.13

/8

RAB 80

42 X 60

17.5

7

6 RAB 20

/8

5

2

1 2 4 6

1 1/8 1 3/8

2

1 RAB 16

/8

7

4 6

5

6

Water Conn. Header OD

Rows

/8

/8

7

4

1 1/8

6

1 3/8

2 4 6 2 4 6

1 1 1 1 1 2

/8 /8 5 /8 3 /8 5 /8 1 /8 1 3

5

CONTACT THE FACTORY FOR ADDITIONAL COIL INFORMATION

/8 1 1/8 7

Filter Quantity

Unit Model

Filter

8

12

16

20

30

40

60

80

14”

X

20”

X

2/4”

5

5

14”

X

25”

X

2/4”

5

5

16”

X

16”

X

2/4”

16”

X

20”

X

2/4”

20”

X

20”

X

2/4”

10

10

Filter Total

W

2 2

6

6

6

6

2 2

2

2

2

2

DIMENSIONS W35


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

W

RAB ROOFTOP BELT DRIVE

Standard Ratings - Water Coil 2- or 4-Pipe Cooling 80F DB / 67F WB Model EWT gpm PD Ft. cfm TTL SENS LAT DB LAT WB mbh mbh 600 21.2 14.9 57.1 55.7 RAB08 45 7 7.7 800 24 17.7 59.6 57.5 1000 26.2 20 61.5 58.9 900 30.6 21.8 57.6 56.2 RAB12 45 8 6.7 1200 34.4 25.8 60.1 58 1500 37.2 29.4 61.9 59.3 1200 40 28.8 57.8 56.3 RAB16 45 10 6.4 1600 45 34 60.3 58.2 2000 49 38.5 62.1 59.5 1500 50.5 36 57.8 56.3 RAB20 45 13 5.4 2000 56.5 42.5 60.3 58.2 2500 61 48.5 62.1 59.5 2250 78 56.5 56.8 55.9 RAB30 45 17.5 4.8 3000 88 67 59.2 57.8 3750 96 77 60.9 59 3000 102 74 57.1 56.2 RAB40 45 21 4.3 4000 115 89 59.4 58 5000 125 102 61.1 59.3 5000 158 120 57.8 57 RAB60 45 31.5 4.4 6000 170 136 59.1 58.1 7000 182 149 60.3 59 7000 213 160 58.9 57.4 RAB80 45 44 6.6 8000 225 173 60 58.2 9000 235 186 60.9 58.9

Model

F

51.1 51.9 52.5 52.7 53.6 54.3 53.1 54.1 54.8 52.8 53.7 54.4 54 55.1 56.1 54.7 56 57 55.1 55.9 56.6 54.7 55.3 55.7

RAB08

RAB12

RAB16

RAB20

Standard Ratings - Heating 4-Pipe Heating 60F EAT / 180F EWT gpm PD Ft. cfm TTL LAT LWT mbh 600 57 147.9 160.5 6 5.1 800 68 138.6 156.8 1000 77 131.2 153.8 900 85 148 158.1 8 5.9 1200 102 138.6 153.9 1500 115 131.1 150.6 1200 113 147.3 156.8 10 5.6 1600 134 137.9 152.5 2000 152 130.3 148.9 1500 142 147.4 157.7 13 4.6 2000 169 138 153.5 2500 190 130.5 150

PERFORMANCE DATA

Note: Standard ratings are for sea level altitude, standard 4-row coils, nominal air volumes and ordinary water. For other conditions and/or other coolants, consult Titus.

W36

Standard Ratings - 2-Pipe Heating 2-Pipe Heating Coil Model 60F EAT / 180F EWT Model gpm PD Ft. cfm gpm PD Ft. TTL mbh LAT LWT 600 36.2 116 161.4 RAB08 4 5.2 800 41.5 108.4 158.6 RAB30 18 6.5 1000 46 102.8 156.3 900 55 116.8 161.1 RAB12 6 4.1 1200 63.5 109.1 158.3 RAB40 22 4.3 1500 70 103.5 155.9 1200 75 118.4 160.6 RAB16 8 3 1600 87 110.6 157.6 RAB60 28 3.5 2000 97 104.9 155.2 1500 96 119.4 163.5 RAB20 12 2.7 2000 111 111.6 160.9 RAB80 22.4 2.6 2500 124 105.9 158.8

2-Pipe Heating Coil 60F EAT / 180F cfm TTL mbh LAT 2250 160 125.7 3000 186 117.3 3750 208 111.3 3000 197 120.7 4000 228 112.8 5000 254 106.9 5000 295 114.6 6000 323 109.7 7000 346 105.7 7000 384 110.7 8000 408 107.1 9000 429 104

EWT LWT 161.8 158.8 156.3 161.7 158.8 156.4 158.4 156.4 154.7 145 142.8 141


Air Handlers

PERFORMANCE DATA

Model

RAB08

RAB12

RAB16

RAB20

RAB30

RAB40

RAB60

CFM

0.34 0.42 0.49 0.57 0.65 0.33 0.40 0.49 0.57 0.69 0.32 0.40 0.51 0.61 0.72 0.36 0.46 0.57 0.69 0.82 0.37 0.46 0.57 0.69 0.81 0.49 0.62 0.77 0.94 1.14 0.65 0.82 0.98 1.18 1.38 0.66 0.81 0.96 1.11 1.26

600 700 800 900 1000 900 1050 1200 1350 1500 1200 1400 1600 1800 2000 1500 1750 2000 2250 2500 2250 2625 3000 3375 3750 3000 3500 4000 4500 5000 5000 5500 6000 6500 7000 7000 7500 8000 8500 9000

Air Volume Capacity - 2-Pipe 0.50” ESP 0.75” ESP RPM BHP RPM BHP 969 0.25 1125 0.32 1022 0.31 1169 0.39 1068 0.36 1206 0.46 1109 0.40 1248 0.52 1160 0.49 1291 0.60 985 0.33 1129 0.43 1035 0.49 1179 0.64 1100 0.60 1230 0.70 1158 0.73 1279 0.83 1224 0.83 1335 0.96 869 0.32 974 0.40 925 0.41 1027 0.50 988 0.57 1085 0.67 1051 0.72 1155 0.87 1126 0.93 1201 1.10 816 0.45 922 0.56 869 0.60 9667 0.71 918 0.73 1014 0.89 979 0.93 1068 1.08 1042 1.19 1131 1.38 699 0.74 788 0.94 748 0.96 833 1.17 793 1.24 879 1.49 848 1.56 920 1.81 903 2.01 972 2.26 777 1.08 853 1.29 840 1.46 906 1.67 917 1.98 979 2.24 982 2.62 1040 2.90 1057 3.32 1115 3.70 830 2.30 910 2.50 910 3.00 990 3.30 980 3.80 1020 4.00 1050 4.80 1100 5.00 1130 5.70 1170 6.0 620 2.80 680 3.20 670 3.20 700 3.50 690 3.80 740 4.20 740 4.60 790 5.20 790 5.40 810 6.00

1.00” RPM 1252 1293 1331 1370 1413 1248 1299 1349 1400 1463 1061 1115 1172 1233 1291 1020 1061 1103 1153 1206 869 904 949 992 1034 925 979 1035 1102 1167 970 1010 1080 1140 1210 710 740 790 830 850

ESP BHP 0.40 0.47 0.55 0.63 0.72 0.54 0.74 0.85 1.02 1.16 0.48 0.62 0.76 1.02 1.25 0.65 0.82 1.02 1.25 1.55 1.09 1.38 1.70 2.08 2.49 1.51 1.94 2.45 3.21 4.02 2.80 3.50 4.50 5.30 6.30 3.50 4.00 5.00 5.50 6.50

1.25” RPM 1379 1408 1447 1484 1523 1362 1411 1462 1504 1568 1151 1201 1247 1312 1369 1119 1144 1185 1233 1286 942 974 1017 1056 1097 990 1039 1095 1160 1222 1010 1070 1120 1180 1260 770 790 830 870 890

ESP BHP 0.50 0.56 0.67 0.75 0.87 0.65 0.88 1.04 1.22 1.37 0.57 0.76 0.95 1.14 1.45 0.78 0.98 1.16 1.41 1.73 1.27 1.58 1.94 2.31 2.72 1.68 2.19 2.73 3.51 4.35 3.00 3.80 4.80 5.70 7.00 4.00 4.50 5.50 6.00 7.00

1.50” RPM 1485 1512 1546 1587 1620 1471 1508 1555 1605 1660 1234 1278 1325 1379 1437 1208 1231 1262 1303 1354 1010 1045 1079 1117 1161 1050 1101 1156 1210 1271 1070 1120 1200 1250 1310 800 830 880 900 930

ESP BHP 0.59 0.67 0.78 0.89 1.00 0.84 1.01 1.21 1.35 1.58 0.70 0.88 1.09 1.34 1.60 0.90 1.13 1.32 1.56 1.92 1.44 1.77 2.11 2.55 2.95 1.88 2.41 3.08 3.78 4.64 3.30 4.00 5.00 6.50 7.20 4.30 5.00 6.00 6.60 7.50

Notes: 1. Motor HP = 1.15* x BHP * In the absence of a specified drive loss factor, use 1.15. To select motor size, find the Brake Horsepower (BHP) for the design cfm and External Static Pressure (ESP). Multiply BHP by 1.15 (or specified factor) and round up to next size motor. Example: 1600 cfm at 0.75-inch ESP requires 0.75 BHP. 1.15 x 0.75 = 0.86. Round up to nearest nominal motor size = 1 HP. 2. Total Static Pressure (TSP) = Internal Static Pressure + External Static Pressure (ESP) 3. ESP = TSP – Internal SP

W

PERFORMANCE DATA

RAB80

ISP

0.25” ESP RPM BHP 795 0.19 853 0.25 908 0.26 949 0.30 1004 0.27 815 0.24 889 0.37 946 0.45 1016 0.58 1098 0.68 740 0.23 809 0.32 884 0.46 957 0.59 1024 0.75 688 0.35 749 0.47 810 0.59 879 0.78 947 0.99 604 0.56 653 0.73 711 1.03 773 1.31 837 1.73 688 0.87 764 1.24 848 1.71 923 2.32 997 3.01 790 2.00 840 2.60 950 3.50 1000 4.30 1060 5.50 580 2.30 600 2.80 650 3.50 690 4.10 730 5.00

www.titus-hvac.com | www.titus-energysolutions.com

RAB ROOFTOP BELT DRIVE

W37


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA RAB ROOFTOP BELT DRIVE

Model

RAB08

RAB12

RAB16

W

RAB20

RAB30

RAB40

PERFORMANCE DATA

RAB60

W38

RAB80

ISP

CFM

0.44 0.53 0.62 0.74 0.84 0.40 0.49 0.59 0.70 0.84 0.39 0.48 0.60 0.72 0.86 0.42 0.54 0.67 0.82 0.97 0.40 0.51 0.63 0.76 0.90 0.57 0.72 0.89 1.08 1.32 0.74 0.95 1.15 1.35 1.55 0.76 0.93 1.09 1.25 1.41

600 700 800 900 1000 900 1050 1200 1350 1500 1200 1400 1600 1800 2000 1500 1750 2000 2250 2500 2250 2625 3000 3375 3750 3000 3500 4000 4500 5000 5000 5500 6000 6500 7000 7000 7500 8000 8500 9000

Air Volume Capacity - 4-Pipe 4-Row 0.25” ESP 0.50” ESP RPM BHP RPM BHP 800 0.16 991 0.25 868 0.21 1041 0.31 936 0.27 1091 0.36 994 0.33 1141 0.43 1037 0.38 1186 0.48 847 0.26 1019 0.37 924 0.34 1078 0.46 989 0.44 1137 0.56 1068 0.56 1201 0.69 1148 0.69 1276 0.83 783 0.29 899 0.37 854 0.37 962 0.47 924 0.49 1034 0.63 994 0.65 1094 0.80 1080 0.84 1176 1.01 729 0.37 846 0.49 791 0.52 909 0.66 863 0.68 965 0.85 937 0.91 1030 1.06 1010 1.14 1103 1.33 612 0.50 714 0.66 678 0.74 763 0.89 739 1.02 820 1.19 798 1.34 873 1.56 867 1.75 933 1.94 725 1.00 812 1.23 813 1.43 881 1.64 896 2.01 958 2.24 971 2.65 1034 2.96 1052 3.42 1124 3.83 800 2.10 880 2.40 890 2.80 950 3.00 960 3.80 1000 4.00 1040 4.70 1100 5.10 1100 5.50 1150 6.00 590 2.50 630 3.00 630 3.00 690 3.50 680 3.80 710 4.10 710 4.30 760 5.00 740 5.00 790 5.80

Cooling and 2-Row Heating Coils 0.75” ESP 1.00” ESP RPM BHP RPM BHP 1145 0.35 1271 0.42 1185 0.39 1310 0.49 1229 0.48 1350 0.58 1285 0.55 1402 0.67 1320 0.61 1443 0.75 1154 0.47 1277 0.57 1209 0.60 1328 0.69 1265 0.68 1387 0.83 1331 0.82 1441 0.98 1403 1.02 1508 1.19 1005 0.46 1095 0.56 1057 0.59 1142 0.67 1125 0.75 1205 0.90 1196 0.97 1270 1.11 1254 1.19 1334 1.33 954 0.62 1046 0.76 1005 0.81 1091 0.95 1059 1.02 1145 1.18 1124 1.27 1204 1.43 1187 1.52 1257 1.73 801 0.80 880 0.96 845 1.06 927 1.24 894 1.38 966 1.58 946 1.75 1012 1.96 994 2.16 1056 2.36 889 1.44 958 1.70 947 1.87 1015 2.14 1028 2.54 1078 2.77 1091 3.25 1144 3.50 1176 4.16 1228 4.46 950 2.70 990 2.90 1000 3.50 1060 3.70 1050 4.30 1140 4.60 1130 5.40 1190 6.00 1180 6.50 1220 7.00 690 3.40 730 3.80 730 3.80 780 4.30 760 4.50 810 5.30 800 5.50 840 6.00 830 6.30 880 6.80

1.25” RPM 1393 1427 1466 1510 1548 1384 1441 1495 1546 1611 1180 1229 1284 1346 1409 1146 1177 1223 1279 1.73 950 993 1032 1075 1121 1020 1077 1141 1200 1274 1040 1100 1180 1230 1290 790 810 850 890 910

ESP BHP 0.53 0.59 0.70 0.79 0.89 0.68 0.82 0.97 1.15 1.36 0.64 0.82 1.02 1.24 1.55 0.90 1.08 1.32 1.61 1.96 1.08 1.42 1.77 2.20 2.62 1.90 2.41 3.08 3.73 4.73 3.10 4.00 4.90 6.30 7.50 4.10 4.80 5.80 6.50 7.30

1.50” RPM 1501 1538 1572 1610 1649 1486 1538 1599 1644 1703 1264 1304 1358 1423 1477 1239 1259 1298 1350 1400 1015 1056 1095 1129 1179 1083 1134 1192 1251 1318 1110 1180 1210 1300 1340 820 860 900 920 950

Notes: 1. Motor HP = 1.15* x BHP\ * In the absence of a specified drive loss factor, use 1.15. To select motor size, find the Brake Horsepower (BHP) for the design cfm and External Static Pressure (ESP). Multiply BHP by 1.15 (or specified factor) and round up to next size motor. Example: 1600 cfm at 0.75-inch ESP requires 0.75 BHP. 1.15 x 0.75 = 0.86. Round up to nearest nominal motor size = 1 HP. 2. Total Static Pressure (TSP) = Internal Static Pressure + External Static Pressure (ESP) 3. ESP = TSP – Internal SP

ESP BHP 0.62 0.73 0.82 0.92 1.02 0.80 0.95 1.11 1.31 1.53 0.76 0.91 1.14 1.42 1.67 1.02 1.22 1.48 1.78 2.13 1.24 1.58 1.97 2.40 2.88 2.13 2.67 3.35 4.09 5.02 3.50 4.10 5.20 7.00 7.80 4.50 5.30 6.30 7.00 7.80


Air Handlers

OPTIONAL ACCESSORIES

www.titus-hvac.com | www.titus-energysolutions.com

RAB OUTSIDE AIR DAMPER

W A 29.0 29.0 38.0 38.0 49.0 49.0 49.0 31.0

Unit 08 12 16 20 30 40 60 80

A 30.0 30.0 38.0 38.0 49.0 49.0 49.0 31.0

Fixed - Dimensions Sizes 08 thru 80 B C D E F 16.0 11.0 6.0 10.0 9.0 16.0 11.0 6.0 10.0 9.0 20.0 10.0 6.0 16.0 11.0 20.0 10.0 6.0 16.0 11.0 27.0 15.0 6.0 26.0 12.0 27.0 15.0 6.0 26.0 12.0 35.0 20.0 6.0 22.0 14.0 47.0 19.0 6.0 26.0 3.0 Motorized B 19.0 19.0 24.0 24.0 29.0 29.0 35.0 47.0

- Dimensions Sizes 08 thru 80 C D E F 9.0 6.0 24.0 3.0 9.0 6.0 24.0 3.0 15.0 6.0 26.0 6.0 15.0 6.0 26.0 6.0 18.0 6.0 45.0 2.0 18.0 6.0 45.0 2.0 23.0 6.0 41.0 4.0 25.0 6.0 25.0 3.0

G 13.0 13.0 12.0 12.0 18.0 18.0 23.0 33.0

H 10.0 10.0 8.0 8.0 14.0 14.0 20.0 20.0

G 14.0 14.0 17.0 17.0 22.0 22.0 29.0 39.0

H 11.0 11.0 14.0 14.0 20.0 20.0 26.0 32.0

OPTIONAL ACCESSORIES

Unit 08 12 16 20 30 40 60 80

W39


Air Handlers

www.titus-hvac.com | www.titus-energysolutions.com

SUGGESTED SPECIFICATIONS

SPECIFICATIONS

W

W40

Available Models: HAB VAB MAB RAB

STANDARD CONFIGURATION

1. Furnish and install Titus models (H)(M)(R)(V)AB air handler units of sizes and capacities shown on the plans to meet prevailing cooling and heating requirements. 2. Air handler units shall be factory wired in compliance with ANSI/UL 1995 Standard, listed with ETL. 3. Cabinets shall be fabricated of LFQ (minimum) steel. External parts shall be made with urethane-based, powder-coated A60 galvanealed steel, while internal parts shall be built from G90 galvanized steel. Units shall pass 500-hour salt spray test as described in ASTM B117. Large access panels shall be provided to permit full access to internal components. The structural integrity of the cabinets shall remain unaffected by the removal of any or all access panels. 4. Cabinet insulation lining shall provide effective acoustical and thermal control, fire safety, and resistance to air erosion. Model HAB lining shall be oneinch dual density, blanket-type made from borosilicate glass fibers bonded with a thermosetting resin including antimicrobial coating. Models (M)(V)AB shall have ¾-inch, dual density, 1.5-pound fiberglass insulation. Model RAB shall have cabinet insulated with 1-inch, 1.5-pound fiberglass insulation as well as a top panel created with 2-inch insulation between double wall construction. 5. Coils shall be of the staggered tube type constructed with seamless ⅜ or ½-inch O.D. seamless copper tubes along with headers and deep corrugated aluminum fins with straight edges from 10 to 13 fins per inch (fpi). Standard coil shall be a 4-row 2-pipe coil (3-row on VAB08). Manufacturer shall supply full depth collars, drawn in the fin stock to provide accurate control of fin spacing and completely cover the copper tubes to lengthen coil life. The tubes shall be mechanically expanded in the fins for a permanent primary to secondary surface bond, assuring maximum heat transfer efficiency. The coils shall be tested at 500 psi for operation at 400 psi gauge. All water coils shall have manual air vents. The coils provided shall be suitable for the application and comply with the required performance as describe in the Unit Schedule. 6. Pipe entry shall be right hand as you are looking at the filter (in the direction of the airflow on models (H)(M) (R)AB. Pipe entry shall be left hand as you are looking at the front of the unit on model VAB. Model RAB shall be constructed so that it can be field piped directly to the outside or down through the piping chase provided inside the unit for areas with severe winter conditions. 7. Drain pan on models HAB 60, 80 and MAB08/MAB12 shall have two-dimensional slope for positive drainage and shall be fabricated of heavy gauge 304 stainless steel. Drain pans on models HAB08 - HAB40 shall be

constructed of plastic. Drain pans on models (M) (R) (V) AB shall be fabricated of galvanized steel.Model RAB shall be constructed so the pan can be field piped directly to the outside or down through the piping chase provided inside the unit for areas with severe winter conditions. 8. Fan wheels shall be double-width, double-inlet, forwardcurved, centrifugal type. They shall be statically and dynamically balanced for smooth, quiet operation. The housing shall be constructed of heavy gauge steel with die-formed inlet cones. The bearings shall be selfaligning, sealed cartridge, permanently lubricated ball bearings that are rubber mounted and shall provide dependable fan operation for an average life of 200,000 hours. The fan shaft shall be solid cold rolled steel designed so its operating speed is below its first critical speed. 9. Filters shall be 2-inch throw away. They shall be center-loading with 85 percent arrestance efficiency. The filters shall be included in the units as an integral part of the cabinet with easy access provided by the manufacturer.

OPTIONAL CONFIGURATIONS COOLING AND HEATING COILS

1. Coils shall be available in a 6-row, 2-pipe configuration for models (H)(M)(R)AB with seamless ⅜- or ½-inch O.D. copper tubes with 10 fpi (13 fpi for RAB60/ RAB80). Hot water coils shall be available in a 1-row configuration with ½-inch O.D. copper tubes and 10 fpi for models HAB08, 12, 16 and 20; and a 2-row configuration for models (H)(M)(R)(V)AB in either preheat or reheat arrangement. 2. Pipe entry shall be available in left hand pipe entry as you are looking at the filter (in the direction of the airflow) on models (H)(M)AB.

MOTORS

Motors and drives shall be belt drive, standard duty, 1750 rpm, open, drip-proof construction. Single-phase motors shall be provided with resilient mount and automatic reset thermal protection. Drive shall be of the V-belt type. Variable-pitch motor sheaves are to be furnished for ease and accuracy in balancing the system and adjusting the required air volume. The motors shall be bolted to an adjustable platform to facilitate belt tensioning and alignment. The blower pulley shall be cast iron, singlegroove with split-tapered bushing that is keyed to the blower shaft.


Air Handlers

SUGGESTED SPECIFICATIONS 1. Mixing boxes shall be available on models (H)(M) AB and shall include low-leakage damper assemblies constructed of welded steel channel frames with 18-gauge galvanized steel blades, die-formed stiffeners, and full blade stop. Stainless steel side seals and vinyl blade seals to reduce leakage shall be provided. All hardware shall be corrosion resistant steel. Mixing box shall be fully insulated with manufacturers standard insulation. Mixing box for model MAB shall require field installation. 2. Controls for mixing boxes shall be provided for models (H)(M)AB requiring field installation and wiring in both 3-position and fully modulating packages. 3. Controls such as contactors, starters, and/or transformers/fan. relays shall be provided by others.

CONDENSATE PAN

Condensate drain pan fabricated of 304 stainless steel shall be available on models (R)(V)AB, MAB16 through MAB80, and HAB08 through HAB40.

GRILLE / PLENUM

1. Discharge grille plenum shall be available with adjustable four-way deflection on model HAB and models MAB16, 20, 30, 40, 60 and 80. This option shall not be available with the electric heat option. 2. Discharge or return plenum with front or rear opening (grilles field supplied and installed) shall be available on model VAB. These plenums can be field modified for a side opening. 3. Return air grilles shall be available for models (H)(M)AB.

2. Model MAB shall be provided with a downflow or horizontal/arrangement in lieu of the standard vertical arrangement.

RAB OPTIONS

1. Model RAB shall be available with a horizontal discharge configuration. 2. Model RAB shall have as an option roof curbs (for flat roof) in 14-, 16- and 18-inch heights. 3. Model RAB shall be available with a modulating air damper economizer package for up to 100 percent outside air in either a down return or horizontal return configuration. The package shall include weather hood, modulating control motor, enthalpy control, mixed air sensor, and transformer/relay for 208/230 motor, builtin gravity relief damper, aluminum moisture eliminator, low temperature adjustable lockout, vinyl blade seal, and a stainless steel side seal. Economizer package shall be shipped separate for field installation. 4. Model RAB shall be available with a manual air damper for up to 100 percent outside air and shall include weather hood, standard manual adjustable damper, vinyl blade seal, stainless steel side seal, and aluminum moisture eliminator. A motor drive kit for the manual air damper shall be available as an option. The damper and motor drive kit shall be shipped separate for field installation.

www.titus-hvac.com | www.titus-energysolutions.com

MIXING BOX

W

FILTER

Pleated filters shall be provided as an option for all models.

CABINET

1. Cabinet liner shall be available in one-inch closed cell on all models. 2. One-inch IAQ fiberglass liner shall be available on models (R)(V)AB and models MAB16, 20, 30, 40, 60 and 80. 3. Double wall construction shall be available on models (H)(R)AB.

ELECTRIC HEATING COILS

Electric heat shall be available on models HAB08, 12, 16, 20, 30 and 40; and MAB08, 12, 16, 20, 30 and 40; and all VAB. 1. Model HAB shall have unit spring vibration isolators available as an option. 2. Model HAB shall be available with a face and bypass damper option as well as an add-on filter section to be attached in front of the face and bypass damper.

MAB OPTIONS

1. Model MAB shall be available with a 6-inch leg kit.

SPECIFICATIONS

HAB OPTIONS

W41


Air Handlers

W

Air Handler Motor Data

Single-phase

Available Models: HAB VAB MAB RAB Phase

Available Motors (60 Hz) ODP, Shaded-Pole ODP ODP, High Efficiency Totally Enclosed, Fan-Cooled ODP, 2-speed ODP, 2-speed ODP ODP ODP, High Efficiency

¼ p p p p p p p p p

/ p p p p p p p p p

½ p p p p p p p p p

¾ p p p p p p p p p

Horsepower 1 1.5 2 3 5 7.5 p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p

ODP, 2-speed

p

p

p

p

p

p

p p p

p

p

Totally Enclosed, Fan-Cooled ODP,HE,TEFC ODP, High Efficiency Totally Enclosed, Fan-Cooled

p p p p

p p p p

p p p p

p p p p

p p p p

p p p p

p p p p

p p p p

p p p p

Voltage

Type

115 115/208-230 115/230 115/230 115 230 277 208-230/460

3-phase

www.titus-hvac.com | www.titus-energysolutions.com

PERFORMANCE DATA

575 575 575

1 3

HAB VAB MAB RAB

08 0.5 0.5 0.5 0.5

12 .05 .05 .05 .05

Maximum Motor HP Model 16 20 30 1.5 1.5 3.0 1.5 1.5 3.0 1.5 1.5 3.0 1.5 1.5 3.0

40 5.0 5.0 5.0 5.0

60 7.5 7.5 7.5

80 10.0 10.0 10.0

FULL-LOAD CURRENTS IN AMPERES, SINGLE-PHASE ALTERNATING-CURRENT MOTORS

PERFORMANCE DATA

p p p p

p p

Notes: 1. ETL-listed. 2. Models (H)(V)(M)(R)AB08, 12, 16 and 20 - two-speed motors installed only (must be field wired). 3. Models (H)(V)(M)(R)AB08, 12, 16 and 20 - single- and three-phase motors installed and wired to unit junction box. 4. Motor sizes 1/4 to 1.5 hp single-phase include auto reset overload. All others require field supplied overload protection. 5. A triangle (p) indicates availability on most models. 208-230/460 3-phase ODP, high efficiency 5hp and 7.5hp no available on VAB. 230 3-phase ODP, high efficiency 5hp not available on VAB. 208-230/460 3-phase ODP, high efficiency 10 hp is available on RAB. 6. Second speed at 2/3 rpm (1140rpm).

Series

W42

p p p p

10

The values of full-load currents are for motors running at usual speeds and motors with normal torque characteristics. Motors built for especially low speeds or high torques may have higher full-load currents, and multi-speed motors will have full-load current varying with speed, in which case, the nameplate current rating shall be used. The voltages listed in the table are rated motor voltages. The currents listed shall be permitted for system voltage ranges of 110 to 120 and 220 to 240 volts. Values presented are from the NEC Handbook, 1999 Edition. Actual motor nameplate amps may vary.

FULL-LOAD CURRENTS IN AMPERES, THREE-PHASE ALTERNATING-CURRENT MOTORS

The values of full-load current are typical for motors running a speed usual for belted motors and motors with normal torque characteristics. Motors built for low speeds (1200 RPM or less) or high torques may require more running current, and multi-speed motors will have full-load current varying with speed. In these cases, the nameplate current rating shall be used. The voltages listed are rated motor voltages. The currents listed shall be permitted for system voltages ranges of 110 to 120, 220 to 240, and 400 to 480. Values presented are from the NEC Handbook, 1999 Edition. Actual motor nameplate amps may vary.

Single-Phase Motors Horsepower ¼ /3 ½ ¾ 1 1½ 2 1

Voltage 115 208 230 5.8 3.2 2.9 7.2 4.0 3.6 9.8 5.4 4.9 13.8 7.6 6.9 16 8.8 8 20 11 10 24 13.2 12

Three-Phase Motors (FLA) Horsepower ½ ¾ 1 1½ 2 3 5 7½ 10

208 2.2 3.1 4.0 5.7 7.5 10.7 16.7 24 31

Voltage 230 460 2.0 1.0 2.8 1.4 3.6 1.8 5.2 2.7 6.8 3.4 9.6 4.8 15.2 7.6 22 11 28 14

575 .08 1.1 1.4 2.1 2.7 3.9 6.1 9 11


H2O index

Y www.titus-hvac.com | www.titus-energysolutions.com


www.titus-hvac.com | www.titus-energysolutions.com

Model Number Index

Y

Model Number Index...............................Page

Model Number Index...............................Page

A Alpety FKL......................................... U67 Alpety HKL......................................... U67 Alpety SKS......................................... U71

VSM/VSS............................................V20 VSR.......................................................V8 VSRM.................................................V12 VSRS...................................................V16

D DISA.................................................. U18 DISA-V............................................... U35 H HAB.................................................... W6 HBC....................................................V27 HBE.....................................................V35 HBP....................................................V31 HBR....................................................V39 HHC....................................................V66 HHE....................................................V74 HHP....................................................V70 L LCBS.................................................. U43 M MAB................................................. W23 R RAB.................................................. W32

MODEL NUMBER INDEX

S SPB.................................................... U59

Y2

H2O Index

T TCM2................................................. U51 V VAB................................................... W17 VBA.....................................................V53 VBC.....................................................V45 VBF.....................................................V49 VBL.....................................................V57 VBLC...................................................V60 VHC....................................................V80


Descriptive Product Index

H2O Index Descriptive Product...................................Page

Air Handlers Air Handler Motor Data................ W42

Dimensions.....................................V36 Performance Data...........................V37 Suggested Specifications...............V43 HBP.................................................V31 Dimensions.....................................V32 Performance Data...........................V33 Suggested Specifications...............V43 HBR................................................V39 Dimensions.....................................V40 Performance Data...........................V41 Suggested Specifications...............V43

Chilled Beam Application Guide Benefits of Chilled Ceiling Systems ......................................................... U9 Chilled Ceiling Applications........... U10 Chilled Ceiling System Design....... U10 Comfort & IAQ Benefits................... U9 Control of Chilled Ceiling System.. U16 Design Methodology..................... U10 Energy Efficiency & Operational Benefits .......................................... U9 First Cost Benefits........................... U9 Heat Transfer................................... U7 History............................................. U6 Induction......................................... U9 Introduction..................................... U6 Practical Design Guidelines........... U10 Product Selection.......................... U13 Psychrometrics................................ U7 Space Design Conditions............... U12 System Design Process................. U12 Theoretical Background................... U7

Horizontal Basic Series HBC.................................................V27 Dimensions.....................................V28 Performance Data...........................V29 Suggested Specifications...............V43 HBE.................................................V35

Horizontal High Output Series HHC................................................V66 Dimensions.....................................V67 Performance Data...........................V68 Suggested Specifications.............. U78 HHE.................................................V74 Dimensions.....................................V75 Performance Data...........................V76 Suggested Specifications.............. U78 HHP................................................V70 Dimensions.....................................V71 Performance Data...........................V72 Suggested Specifications.............. U78 Linear Active Chilled Beams DISA............................................... U18 Dimensions.................................... U21 Performance Data...... ....................U29 Suggested Specifications.............. U42 DISA-V........................................... U35 Dimensions.................................... U37 Performance Data...... ....................U39 Suggested Specifications.............. U42 LCBS.............................................. U43

Y

DESCRIPTIVE PRODUCT INDEX

Fan Coil Accessories Combo Accessories........................V89 Flexible Connectors........................V89 Motorized Control Valves................V87 Motorized Valve Actuators.............V87 Thermostats....................................V86 Thermostat Accessories.................V86 Valve Package Accessories.............V87 Valve Package Connection Size......V89 Wireless Accessories.. ....................V90

Horizontal Belt Drive Series HAB................................................ W6 Dimensions..................................... W7 Optional Accessories.................... W14 Performance Data......................... W10 Suggested Specifications............. W40

www.titus-hvac.com | www.titus-energysolutions.com

Descriptive Product.....................................Page

Y3


www.titus-hvac.com | www.titus-energysolutions.com

Descriptive Product Index (continued)

DESCRIPTIVE PRODUCT INDEX

Y

Y4

H2O Index

Descriptive Product.....................................Page

Descriptive Product.....................................Page

Dimensions.................................... U45 Performance Data...... ....................U47 Suggested Specifications.............. U49

Vertical Basic Series VBA.................................................V53 Dimensions.....................................V54 Performance Data...........................V55 Suggested Specifications...............V63 VBC.................................................V45 Dimensions.....................................V46 Performance Data...........................V47 Suggested Specifications...............V63 VBF.................................................V49 Dimensions.....................................V50 Performance Data...........................V51 Suggested Specifications...............V63 VBL.................................................V57 Dimensions.....................................V58 Performance Data...........................V59 Suggested Specifications...............V63 VBLC...............................................V60 Dimensions.....................................V61 Performance Data...........................V62 Suggested Specifications...............V63

Linear Passive Chilled Beams SPB................................................ U59 Dimensions.................................... U61 Performance Data...... ....................U63 Suggested Specifications.............. U66 Modular Belt Drive Series MAB............................................. W23 Dimensions................................... W24 Optional Accessories.................... W30 Performance Data......................... W27 Suggested Specifications............. W40 Radiant Ceiling Panels Alpety FKL..................................... U67 Dimensions.................................... U68 Performance Data...... ....................U69 Suggested Specifications.............. U73 Alpety HKL..................................... U67 Dimensions.................................... U68 Performance Data...... ....................U70 Suggested Specifications.............. U73 Alpety SKS..................................... U71 Dimensions.................................... U72 Suggested Specifications.............. U73 Rooftop Belt Drive Series RAB............................................... W32 Dimensions................................... W33 Optional Accessories.................... W39 Performance Data......................... W36 Suggested Specifications............. W40 Thermal Comfort Modules TCM2............................................. U51 Dimensions.................................... U53 Performance Data.......................... U55 Suggested Specifications.............. U57

Vertical Belt Drive Series VAB............................................... W17 Dimensions................................... W18 Optional Accessories.................... W22 Performance Data......................... W20 Suggested Specifications............. W40 Vertical High Output Series VHC.................................................V80 Dimensions.....................................V81 Performance Data...........................V82 Suggested Specifications...............V84 Vertical Stack VSM/VSS........................................V20 Dimensions.....................................V21 Performance Data...........................V22 Suggested Specifications...............V24 VSR...................................................V8 Dimensions.......................................V9


Descriptive Product Index (continued)

Performance Data...........................V10 Suggested Specifications...............V24 VSRM.............................................V12 Dimensions.....................................V13 Performance Data...........................V14 Suggested Specifications...............V24 VSRS...............................................V16 Dimensions.....................................V17 Performance Data...........................V18 Suggested Specifications...............V24

www.titus-hvac.com | www.titus-energysolutions.com

Descriptive Product.....................................Page

H2O Index

Y

DESCRIPTIVE PRODUCT INDEX Y5


Notes

H2O Index


Standard

Standard & Optional Finishes Grilles & Diffusers

#01 Aluminum Enviro-THANE速 finish is a tough, baked-on urethane coating with superior surface durability for rough-handling environments. Paint sample matching is available.

#20 Custom ENVIRO-THERM

#21 Custom ENVIRO-THANE

#34 Natural

#94 Light Bronze

#95 Medium Bronze

#96 Dark Bronze

#101 Luster Clear

#102 Brushed Clear

#103 Luster Gold

#104 Brushed Gold

#105 Luster Black

#106 Brushed Black

#107 Luster Bronze

#108 Brushed Bronze

Custom

#84 Black

Anodized Finishes

#26 White

Anodizing converts the outer layer of aluminum to a ceramic shell of aluminum oxide, increasing resistance to corrosion and the weather.

#110 Brushed Pewter Mill Finish refers to sheet metal with no surface coating or treatment. For highly corrosive or sanitary applications, a number of products are available in 304 stainless steel.

#04 Aluminum

Mill

#109 Luster Pewter

#04 Stainless Steel

Colors on this chart may vary slightly from the actual product. For more accurate color, ask your Titus representative for a color chip sample.


clever. creative. comfort.

Address: 605 Shiloh Rd. Plano, Texas 75074 Office: 972.212.4800 Fax: 972.212.4877 E-mail: titus@titus-hvac.com Websites: www.titus-hvac.com | www.titus-energysolutions.com Š Copyright Titus 2011 | All rights reserved


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.