Brite Energy Solutions - Tom Knoblock - 1-844-533-2897
Light Module ——LED Optical Engine
ARRLUX
GAMA Series LED Area Light
Huizhou Arrlux Optoelectronic Co.,Ltd
INSTALLATION INFORMATION
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION W
IMPORTANT INSTALLATION INFORMATION
W
1.Before commencing installa on or maintenance, ensure electricity is switched off at the mains. Installa on or maintenance should be carried out by a qualified electrician. L
2.The luminaire must not, under any circumstances, be installed directly to flammable materials, and luminaires must not be covered with any flammable materials. 3.Moun ng height range of 6 to 12 meters, this model is suitable for outdoor ligh ng. 4.Ensure there is adequate free air circula on of at least 50cm around the luminaire. All luminaires run hot. It is the installer's responsibility to consider fire risk and take appropriate precau ons.
Main specifica ons: Model No.
No. of LEDs
System Wa age
Dimensions (L x W x H)
Net Weight
EPA*
FLB80-T
36
80W
360(14.17")x330(12.99")x70mm(12.76")
5.88kg(12.94lbs.)
0.034m²
FLB120-T
54
120W
420(16.53")x330(12.99")x70mm(12.76")
6.87kg(15.11lbs.)
0.037m²
FLB160-T
72
160W
480(18.90")x330(12.99")x70mm(12.76")
8.38kg(18.44lbs.)
0.041m²
FLB200-T
90
200W
600(23.61")x330(12.99")x70mm(12.76")
9.25kg(20.35lbs.)
0.048m²
FLB240-T
108
240W
660(26.00")x330(12.99")x70mm(12.76")
10.21kg(22.46lbs.)
0.052m²
Working Environment
IP
- 40℃-+50℃
IP65
Working Environment
IP
- 40℃-+50℃
IP65
Input Voltage:120-277V~50/60Hz The ingress protec on of the fixture is IP65 if the mains supply cable's specifica on is H07RN-F 3*1.5m㎡.
Model No.
No. of LEDs
System Wa age
Dimensions (L x W x H)
Net Weight
EPA*
FLC80-T
36
80W
360(14.17")x330(12.99")x70mm(12.76")
5.88kg(12.94lbs.)
0.034m²
FLC120-T
54
120W
420(16.53")x330(12.99")x70mm(12.76")
6.87kg(15.11lbs.)
0.037m²
FLC160-T
72
160W
480(18.90")x330(12.99")x70mm(12.76")
8.38kg(18.44lbs.)
0.041m²
FLC200-T
90
200W
600(23.61")x330(12.99")x70mm(12.76")
9.25kg(20.35lbs.)
0.048m²
FLC240-T
108
240W
660(26.00")x330(12.99")x70mm(12.76")
10.21kg(22.46lbs.)
0.052m²
Input Voltage:347-480V~50/60Hz The ingress protec on of the fixture is IP65 if the mains supply cable's specifica on is H07RN-F 3*1.5m㎡.
LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE
Installa on Instruc on & Installa on Steps Installa on and Moun ng A
1
Installa on and Moun ng A
2 Moun ng arm
Moun ng arm
Pole Pole
Spring washer(M10)
Spring washer(M10)
STEP 1: 1.Loosen the M12 screws, nuts, spring washers on the moun ng arm with a wrench. 2.Insert the pole into the middle hole of moun ng arm ll to the end. See Figure 1.
STEP 2: When the pole is inside the moun ng arm, adjust the moun ng angle of the lamp, then screw the the M12 screws, nuts and spring washers. See Figure 2
Installa on and Moun ng B
3
M10 screw M6 screw
Pole
Installa on and Moun ng B
4
Moun ng plate
STEP 3: 1. Fix the moun ng plate on the pole with M10 screws. 2. Connect the cables from the luminaire and from the pole. Please See figure 3 the wiring diagram.
STEP 4: 1. Fix the luminaire to the moun ng plate with 4 M6*20 screws. See Figure 4
Installa on and Moun ng C
5
Installa on and Moun ng C
6 M10 screw M6 screw
Moun ng plate Wall
Wall
STEP 5: 1. Fix the moun ng plate on the wall with M10 screws. 2. Connect the cables from the luminaire and from the wall. Please See figure 5 the wiring diagram.
STEP 6: 1. Fix the luminaire to the moun ng plate with 4 M6*20 screws. See Figure 6
Safety No ce
Alterna ng Current
WIRING INSTRUCTION ***IF THERE IS JUNCTION BOX IN CEILING: STEP I: Connect the LINE wire in the mains power supply cord to black LINE wire from lightbody . STEP II: Connect the NEUTRAL wire in the mains power supply cord to white NEUTRAL wire from lightbody . STEP III: Connect the green grounding wire in the mains power supply cord to green grounding wire from lightbody .
Input wire H07RN-F 3x1.5mm² (SJOW 3 * 18AWG) or rubber sheathed cable (not supplied).Conductor must have a minimum cross-sec onal area of 1.0mm² (18AWG).
Electrical Connec ons
7
Terminal Block
L
LIVE - Black
GROUND
G
GROUND-Housing
NEGATIVE
N
NEGATIVE - White
LED DrivER
Mains power supply
LIVE
STEP 7: Reference “Electrical Connec ons” sec on for comple ng electrical connec ons. See Figure 7
This logo indicates that this product must not be disposed of with other waste. Please recycle used lamps to prevent environmental hazard and threats to human health resul ng from improper disposal.