Page 1 of 3
® eLucent ™ Nebula LED Gas Station Canopy Light ATG Electronics Electronics® eLucent™ USER GUIDE
NOTE: Please read this entire manual prior to installation. The product must be used in accordance with the voltage and frequency ranges indicated on the driver. The product is suitable for indoor and outdoor use, and it is moisture proof and dust proof. Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most recent user guide. INCLUDED IN THIS BOX ATG Electronics® eLucent™ Nebula LED Gas Station Canopy Light, 1 PCs Power Supply, 1 PCs Accessory Kit, 1 Set User Guide, 1 Set UNPACKING 1)
Unpack and carefully examine the product and parts for missing and/or damaged items.
2)
Report any damage and save all packing materials if any part(s) were damaged during shipping.
3)
Do not attempt to use this apparatus if it is damaged.
INSTALLATION INSTRUCTIONS 1)
The product is to be installed by a qualified electrician or technician in accordance with relevant local codes.
2)
Due to risk of electric shock, verify that the main power source is turned off prior to and during installation and maintenance.
MAINTENANCE 1)
Use a dry or slightly moistened cloth for cleaning.
2)
Never use any chemicals or abrasive materials for cleaning.
INSTALLATION STEPS 1. New Installation 1)
Turn off main power before installation.
2)
Drill 5 holes through the ceiling over mounting holes on the mental pad.
3)
Fit the 4 screw rods on the back of the Nebula LED Gas Station Canopy Light.
4)
Fix the Nebula LED Gas Station Canopy Light to the ceiling with nuts and mental pad, then do the waterproof job.
5)
Install the driver box to the Nebula LED Gas Station Canopy Light with screws.
6)
Connect the Nebula LED Gas Station Canopy Light to driver LED DC output.
www.atgelectronics.com
Toll free: 877-461-5333
E-mail: sales@atgelectronics.com REV1.0
Page 2 of 3
7)
Connect the source VAC to driver VAC in.
8)
Use screws to fix the cover and driver box.
www.atgelectronics.com
Toll free: 877-461-5333
E-mail: sales@atgelectronics.com
Page 3 of 3
2. Retrofit Installation 1)
Turn off main power before installation.
2)
Fit the 4 screw rods on the back of the Nebula LED Gas Station Canopy Light.
3)
Fix the Nebula LED Gas Station Canopy Light to the ceiling with nuts and mental pad, then do the waterproof job.
4)
Install the driver box to the Nebula LED Gas Station Canopy Light with screws.
5)
Connect the Nebula LED Gas Station Canopy Light to driver LED DC output.
6)
Connect the source VAC to driver VAC in.
7)
Use screws to fix the cover and driver box.
www.atgelectronics.com
Toll free: 877-461-5333
E-mail: sales@atgelectronics.com