Project
Type
Catalog #
DESCRIPTION
QubePark
The QubePark LED evenly illuminates walkways and parking garages. The classic design of this luminaire seamlessly blends into all forms of architecture. Highly efficient and long-lasting, the QubePark LED is an ideal replacement for HID. Exceptional high-brightness LEDs result in higher light levels and significant energy savings. High-efficiency 5200K, 70 CRI LEDs mounted to a metal-core circuit board and aluminum heat sink, ensure optimal thermal management and long life (L85 124,000 hrs).
Parking Garage Luminaire
FEATURES AND SPECIFICATIONS l
Equivalent to 175 Metal Halide fixture
l
Occupancy sensor dims fixture when no occupancy is detected
l
Mark7 (0-10V) dimming available
l
Type 5 medium light distribution
l
Comes fully equipped with power supply
l
5-year warranty
CERTIFICATION l l
ENERGY DATA
UL Listed USA and Canada File# E338791
Input Voltage (V AC)
DesignLights Consortium qualified
System Level Power (W)** Delivered Lumens (Lm)
120 - 480 70 6250
System Efficacy (Lm/W)**
89
Correlated Color Temp (K)
5200K
L70 Calculated Life (hrs)*
289,000
L85 Calculated Life (hrs)*
124,000
Minimum CRI Operating Temperature (°C)
70 -40 to 45
* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors. ** Measured at 277VAC
SPECIFICATIONS Dimensions (in) Units/carton Net Weight (lb) Environmental Rating
ORDERING INFORMATION
14.15 x 17.0 x 4.0 1 10.25 Wet
Example: QG2-1-UNVL-2-5M-52-0
QG2
1
2
Series
Variant Input Voltage # of Light Dist Qubes Pattern
QG2
1
UNVL 120-277
2
UNVH* 277-480
5M
52 Color Temp Options
5M 5 Medium 52
5200K
0
10V Dimming
1
Occupancy Sensor
* Not DesignLights Consortium qualified
Specifications and dimensions subject to change without notice.
DATASHEET 05.06.2014
Project
Type
Catalog #
DESCRIPTION Eco-Night2 is a wall-mounted LED luminaire designed for outdoor area lighting applications. Using a mere 67 Watts of power and delivering 6250 lumens, the Eco-Night2 is an ideal replacement for 150-250 Watt metal halide wall pack fixtures. The Eco-Night2’s long L70 life expectancy will not only minimize or eliminate maintenance and replacement costs, but will also promote environmental restoration through reduced CO2 emissions and reduced waste/landfill. Backed by US LED’s standard 5-year warranty, Eco-Night2 is a sound investment in performance, longevity and contributing to the global green movement.
Wall Pack Luminaire 2-Qube, 120-277V Input
FEATURES AND SPECIFICATIONS l
Low voltage Class 2 design
l
Internal Qube LED module features advanced heat sink
l
Uses at least 70% less power than equivalent metal halide
l
5-year warranty
CERTIFICATION l
UL Listed USA and Canada File# E338791
l
DesignLights Consortium qualified
l
Dark Sky Friendly Fixture
l
LM-79
ENERGY DATA Correlated Color Temp (K)
5000K
Input Voltage (V AC)
120 - 277
System Level Power (W)**
67
Delivered Lumens (Lm)
6250
System Efficacy (Lm/W)**
93
L70 Calculated Life (Hrs)*
112,000
L85 Calculated Life (Hrs)
52,000
Minimum CRI
80
Operating Temperature (°C)
-40 to 50
* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors. ** Measured at 277VAC
SPECIFICATIONS Dimensions (in)
ORDERING INFORMATION
18.22 x 9.12 x 13.88
Units/carton Example: DSCO2-1-UNV-50-2-00
1
UNV
50
2
00
Series
Variant
Input Voltage 120-277
Color Temp
# of Options Qubes
DSCO2
1
UNV
50
2
00
17.05 lbs
Environmental Rating
DSCO2
5000K
1
Net Weight
Wet
Standard
Specifications and dimensions subject to change without notice.
US LED
|
DATASHEET 04.30.2014
|
|
|
|
Project
Type
Catalog #
DESCRIPTION
QubeFlood3
QubeFlood3 is a flood light LED luminaire designed to be mounted vertically or horizontally in outdoor applications. High-performance LEDs provide light where you need it, at a fraction of the operating cost of HID technologies. With a lifetime of more than >200,000 hours*, QubeFlood3 is the ideal replacement for 250W metal halide fixtures. Slip-fitter, Pole Mount or Trunnion Mount options are available for easy and fast installation.
2-Qube Flood Light Fixture
FEATURES l
Slip-fitter, Pole Mount and Trunnion Mount options available
l
Type 3M, 5M and lambertian light distribution pattern
l
5-year warranty
CERTIFICATION l
UL pending
ENERGY DATA Input Voltage (V AC) System Level Power (W)** Delivered Lumens (Lm)
120-277/277-480 96 10,300
System Efficacy (Lm/W)**
107
Correlated Color Temp (K)
5000K
L70 Calculated Life (hrs)*
>200,000
L85 Calculated Life (hrs)*
182,000
Minimum CRI Operating Temperature (°C)
70 -40 to 40
* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors. ** Measured at 277VAC
SPECIFICATIONS Dimensions Units/carton
ORDERING INFORMATION
Net Weight
Example: QF3-1-UNVL-5M-50-1050
QF3
Environmental Rating
14.25” x 14.25” x 3.75” 1 11 lbs Wet
50
Series
Color
QF3
1 Bronze 2 White †
Light Dist Pattern
Color Temp
Current
UNVL 120-277
5M
50 5000K
1050
UNVH 277-480
3M
3 Black †
Standard Flux
12 Lambertian
† Special order, not stocked Specifications and dimensions subject to change without notice.
PRELIMINARY DATA DATASHEET 04.23.2014
PRODUCT DESCRIPTION Only 4.5� in diameter delivering 4700 Lumens brilliantly equipped with 21 Philips Luxeon T High Power LED’s in 3 clusters. Optional hardware includes optic packages to meet any distribution requirement: Type 2, Type 2 Wide, Type 3, 15, 25, 50, 75, 120, 360 degrees. Approximately the same size as a par 38 lamp, designers now have the brightness to replace high wattage HID lamps in a small footprint. Available as both retrofit and new architectural track and combo recessed fixtures.
LED retrofit kits up to 1,000 watt equivalent available Superior active cooling coupled with proprietary thermal management design ensures the M21LED Module maintains efficiency at high temperatures, color consistency and low light degradation through its rated life of 100,000Hrs
10 Year Warranty LEDs & Magnetic Levitation Cooling Fan, 5 Year Driver Warranty
Lumen maintenance regulator circuit LED chips slightly degrade over time. The M21LED Module has a sophisticated regulator circuit which maintains lumen output over the life of the lamp. Proprietary software includes a special current loop technology to prevent load variation degradation. As the degradation occurs it adjusts the current to compensate. This means no light level reduction for 100,000hrs +!
561 Energy Saver Program
When selected, this program allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation, dimming 50% for 6 late evening hours, than ramping back up to 100% output for the last hour before dawn. This useful program saves 3 hours of operation per night over 1100 hours per year!
Wattage selection:
Your M21LED Module can be set to 4 output wattages. Depending on the application, you may not need full output and therefore can adjust down to the setting you want. Approximate wattages: 100%- 60w equivalent to 175w Metal Halide 75%- 50w equivalent to 100w Metal Halide 50%- 40w equivalent to 70w Metal Halide 25%-30w equivalent to 50w Metal Halide
Future Proof Module As energy efficiency advances in LEDs are made and new bins become available, they will be incorporated into the M21LED Module, offering higher efficacies, without changing the dimensions and shape of the system. This allows luminaire manufacturers to plan and design new luminaire ranges for the coming years.
Benefits
New Lumen Maintenance Circuit Increased efficacies Color consistency increased Dimming options include 0-10V, Wireless Rated Life 100,000Hrs High Lumen Output Substantial energy savings Enables Intelligent controls and networking Small Footprint-4.50”
Applications
Offices (areas such as hallways, receptions, boardrooms, etc.) Hotel lobbies and receptions areas Retail high-end shops Commercial/Industrial Interior Space (warehouse, garage) Commercial/Industrial Exterior Space (parking lots, streets, roadways)
Additional protection
24V Line Voltage Variation regulation Under Voltage Protection 21v Minimum Over Voltage Protection 30V shut off Reset 27V or lower Over Temp-thermistor-90C shut off Below 85C turns back on
END USER MODULE ADAPTERS & Fixtures The M21LED Module is available with optional adapters to facilitate simple retrofit of existing fixture housings. It is available in new Track and Recessed fixtures.
Brite Energy Solutions Tom Knoblock 308-367-4542 tknoblock@curtis-ne.com
www.terraluxillumination.com
Linear Line Voltage LED Engine Product Specification
INTRODUCTION The TerraLUX Linear LED Engine is a fully-integrated, self-contained, plug-and-play LED solution for lighting fixture manufacturers and retrofit installations. The Engine is AC-mains compatible, dimmable, and requires no additional drivers or special sockets. A compact form-factor, flexible mounting options, and complete integration of drive electronics and optics, combined with TerraLUX’s patented LEDSense® thermal management circuitry means simple, low-cost integration, fast time to market, and reliable, long-term operation and lumen maintenance. The TerraLUX Linear LED Engine is an ideal solution for a wide variety of applications including wall sconces, ceiling fixtures, and recessed applications.
FEATURES
120V or 100-277V AC input
Dimmable with standard phase-dimmers (120V version) or 0-10V dimming systems (100-277V)
Available in 3 sizes : 4”, 6” and 8”
Patented LEDSense® Thermal Management simplifies integration and ensures reliability and lumen maintenance
Available in 2,700K, 3,000K, 3,500K and 4,000K
>50lm/W at 3000k CCT and 85 CRI (120V)
L70 = 60,000 hours
IP-65 Rated
UL Recognized Component
UL 1598C Classified (LED Retrofit Kit)
ENEC Certified Product
5-year warranty
FCC Compliant
RoHS Compliant, Pb Free
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
1
www.terraluxillumination.com PRODUCT CHARACTERISTICS
Notes:
Typical Performance @ 25°C Heatsink temperature, Tc . See Relative Light Output vs Temperature and LEDSense® graphs, page 3, for temperature & Power de-rating. All specifications subject to tolerance of ± 10% (*) Power draw may be affected by installation with a dimmer—120V version only
PHOTOMETRY Relative Candela Distribution (3000K—120° lambertian) Max Candela Value : 154.7 Vertical Plane 90°-270° (Max) Vertical Plane 0°-180° Horiz. Cone 5° (Max)
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
2
www.terraluxillumination.com LEDSense® OPERATION, THERMAL DERATING, & LUMEN MAINTENANCE TerraLUX Linear LED Engines employ TerraLUX’s patented LEDSense® Thermal Management Technology to automatically provide maximum light output in various fixtures and operating conditions while assuring long-term lumen maintenance. LEDSense® regularly measures the operating temperature and ensures compliance with a preprogrammed temperature and drive-current profile. This profile is based on the LED manufacturer’s LM-80 data report and minimum L70/60,000 hour lumen maintenance curves (extrapolated per IES TM-21-11). LEDSense® is always active, and will compensate for variation in thermal conditions due to heatsinking, ambient air, Engine positioning, or any other variable that affects the operating temperature. The Thermal De-rating curve below identifies the relative light output that can be expected under various thermal conditions. The LEDSense® Power Curve identifies the reduction in input power over temperature.
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
3
www.terraluxillumination.com TESTS AND CERTIFICATIONS Product Safety Evaluation
120V • UL Standards 8750 (Recognized Component), 1598C (LED Retrofit Kit) • CSA Standard C22.2 No. 250.0-08 100-277V • UL Standards 8750 (Recognized Component), 1598C (LED Retrofit Kit) • CSA Standard C22.2 No. 250.0-08 • ENEC License ENEC-00404 —tested according to EN 62031:2008 (Ta 55°C Tc 85°C)
Radio Frequency Emissions
• FCC Part 15, Unintentional Radiators Class A. (120V) • FCC Part 15, Unintentional Radiators Class B. (100-277V)
Reduction of Hazardous Substances (RoHS)
European Council Directive 2002/95/EC
Input Current
Current : ≤ 120 mA
Input Voltage Range/Frequency Range
120V 90-132 VAC / 47-63Hz 100-277V 90VAC—300VAC / 47Hz—63Hz
Power Factor
>=0.90
Electrical Fast Transients
IEC/EN 61000-4-5 ±1 kV
Surge
IEC/EN 61000-4-5 ±500V Differential mode / ±1 kV Common mode
Voltage Harmonics
IEC/EN 61000-3-2
Voltage Dips and Interrupts
Mains dips of 30% for 500ms, 95% for 10ms, and interruptions of 95% for 5s
Electrostatic Discharge
± 6 kV Contact mode, ± 10 kV Air Gap
Shock and Vibration
Operating – Non Operating
Impact
1 m product drop, 1.3 m steel ball impact
Operating Temperature
-40°C to +55°C, 0 to 95% R.H. / 153 hr
Storage Temperature
-40°C to +85°C / 60 hr. followed by 20°C to 85°C, 5 to 95% R.H. / 80 hr
Ingress Protection (Water, Dust)
IP65
Corrosive Environment
96 Hours Salt Fog Test (5% salt fog at 95°C) per Mil-Std 810F, Method 509.4
Dimmer Compatibility
See “Dimmer Compatibility Matrix”
Dimming Standard Conformance
NEMA SSL 6-2010 Relative light output vs. phase angle (120V)
Lumen Maintenance
L70 =60,000hr per IES TM-21-11 (Based on LED Manufacturer’s measurement per IES LM-80-08 @ 10.000hrs). To be extended as additional data becomes available
Reliability Demonstration
100 units running continuously for 6,700 Hrs each (120V—4”)
Mean Time Between Failures (MTBF)
120V - 4”: >680,000 Hrs. ; 6”: > 275,000 Hrs. ; 8”: > 400,000 Hrs. 100-277V - 4”: >530,000 Hrs. ; 6”: > 312,000 Hrs. ; 8”: > 260,000 Hrs.
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
4
www.terraluxillumination.com MECHANICAL DIMENSIONS All dimensions in inches
Thermal Measurement Point (Tc)
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
5
www.terraluxillumination.com MOUNTING OPTION: IN-LINE All dimensions in inches
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
6
www.terraluxillumination.com MOUNTING OPTION: OFFSET All dimensions in inches
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
7
www.terraluxillumination.com MOUNTING OPTION: MULTI-UNIT OFFSET All dimensions in inches
Engine
Dim A
Dim B
4”
4.08
8.9
6”
6.08
12.9
8”
8.08
16.9
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
8
www.terraluxillumination.com Optional Undermount Bracket Kit All dimensions in mm
Kit Content:
Undermount plate 2 x self drilling flat head screws (mounting to fixture) 2 x Phillips pan head (mounting light engine to plate via straight brackets provided with Retrofit Kit)
4 inch (TLMA-937000008)
6 inch (TLMA-937000009)
8 inch (TLMA-937000010)
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Subject to change without notice
9
www.terraluxillumination.com PRODUCT SELECTION & PART NUMBER GUIDE
(Example)
(1) Light engine delivered with Thermal Pad (UL registered Component) (2) Retrofit Kit Content (UL 1598C Classified):
LED Light Engine + Thermal Pad 2 x straight mount brackets 2 x Offset Brackets 3 x wire nuts 2x sets of self-tapping screws (short and long) Retrofit Instructions
(*) A more diffuse distribution is available by adding an optional diffuser (180°) distribution. Please refer to the list of optional accessories here below.
Optional Accessories :
CONTACT INFORMATION TerraLUX, Inc. 1830 Lefthand Circle Suite B Longmont, CO 80501
TerraLUX Linear LED Engine Product Specification (05/14/2013)
Phone: 303-442-4960 E-mail: OEMsales@TerraLUX.com www.TerraLUX.com
Subject to change without notice
10