Smart LED Property Lighting
HUB App Manual
v2
1
Initial Login The Gemstone Lights HUB app allows you to control your lights from anywhere through the cloud or by Bluetooth connection
Step 1: In your device’s App store, Download the “Gemstone Lights HUB” App
Step 2: Click “Login with Existing Account”. Login using your cell phone number or email
and your default password: “12345678”
(Other desired users can access and control your lights by using this same login)
Tips from Helpful Herby! -Folders & Modes are device specific and will only appear on individual devices. -Timers, however, save to the controller and will appear for anyone who logs in to your lights.
By selecting this Bluetooth symbol you can access and control your lights without wifi. (Bluetooth offers all the same control as the cloud connection. The only restriction is that you must be within Bluetooth range of the controller). Your default Bluetooth password is: 123456
If you have multiple zones (controllers), you can group the zones together. (timers & custom modes cannot be used within a group)
On / Off Switch (when switched from off to on, lights will come on to the whatever was last active)
“Online” does not necessarily mean that the lights are turned on but means that the controller has a good connection with the wifi
v2
2
Download Folders Download folders each containing multiple pre-designed modes
Downloading pre-made modes is a great place to familiarize yourself with all the capabilities and looks of the lights and then take that knowledge to the builder to create your own unique modes!
Select different categories to bring up downloadable folders
Press “Install” to install desired folder
*If there is an error installing the folder, SWIPE row to the left to bring up these buttons. Press “Re-Install”. If Re-Install still fails, press “Remove File” and install again.
v2
3
Static Page -The Static page gives you basic control of your lights. -In the Static page you can make the entire system a single color. -The static page is also where you can save custom colors to use in creating modes.
Additional On / O Switch
Move your finger around the color wheel to find custom and unique colors
(the closer to the edge, the darker the color)
Control Brightness using this bar
Create and save custom colors by holding on these squares
(squares that have an existing color can be overwritten by holding on them as well)
Saving colors to squares is extremely useful and will make creating modes much easier!
v2
4
Mode Builder -The Mode Builder is where you create & animate your own unique modes *You will be creating a pattern of up to 10 lights that will repeat itself throughout the lights
Start by pressing this “+” button. You will then select a folder icon followed by naming the folder Open the newly created folder. Press this “+” to create a new mode
Name your mode here Add animation here Select direction of animation here (not relevant for all animations) Change animation background color here (not relevant for all animations) After selecting (do not hold) simply choose any color (this rectangle will have a grey border when it is selected) Add lights to your pattern by pressing this “+” (this current example has 3 lights in the pattern) Select a light to change its color (selected light will have a black ring around it) (do not hold to select) You can delete a selected light from the pattern by pressing the garbage can icon
Activate modes by pressing on the mode. You will know the mode is active when the star shifts over and this small “>” appears
Pressing the star will not activate the mode but rather add the mode to the Favorites folder.
Adjust both Brightness and Animation Speed using these dials
v2
5
Custom -The ultimate customizing tool! -Individually select and control lights. -Most useful for accent lighting (i.e. tops of peaks, corners, above house number, every 3rd light over front porch, etc)
Unless your wifi is absolutely flawless around the exterior of your property it is HIGHLY RECOMMENDED to create your custom modes while connected via Bluetooth! Less than perfect wifi while dealing with this much data may cause a lag. Bluetooth will not have this issue. *Be sure to stay within bluetooth range
Save your custom program by pressing this “Custom” back arrow in the top left
*You must do this in order to successfully save your custom program
Select lights by touching numbered circles. Do not hold.
Selected lights will blink on your house and will have a grey border around them on your device screen
After selecting 1 - 10 lights, HOLD on one of the selected lights to add a color to the selected lights
*Remember to press “Save” in the top right corner after you have set your color
It is recommended to SAVE AS YOU GO -Add color to 10 lights at a time -Fully save your program roughly every 20-30 lights v2
6
Timers -Add and edit timers here -You can create multiple timers
-You add modes to timers, not timers to modes -Remember to press “Save” in the top right corner when you are finished setting a timer
Name your timer here
Add a mode to a timer here
Select “Builder” to access folders and modes
Choose an On time here
*Remember to press confirm after selecting the time Repeat for setting Off time Choose which days you would like the timer to be active for
*To fully deactivate a timer, in addition to turning off the main timer switch on the previous page, unselect all days here
You can edit timers by pressing the timer you want to edit. Do not hold. *Custom programs will have to be re-loaded when timer is edited
v2
7
Creating A Group - Groups are perfect for quickly turning on a color or mode on multiple controllers at the same time.
- Custom (individual light control) modes & timers cannot be set in groups.
Step 1: Go into one of the individual controllers.
Click the menu button in the top right corner.
Step 2: Click “Create Group”
Step 3: Select controllers you wish to add to a group
Press “Save” in the top right corner
You will then be prompted to name the new group
v2
8
Adding a Controller -If you ever change your wifi provider or router, your controller(s) will need to be re-added to your network *You must be within Bluetooth range from the control box when re-adding your controller
Step 1:
Step 2:
Press the “+” in the top right corner on the opening page of the app
Select the controller you wish to add to your wifi
Step 3:
Step 4:
Press “Wifi Sync”
Input your wifi password and press “Next”
If after Step 4, loading screen does not appear, or if after loading to 100% there is an error message, simply close app completely, take your device off of wifi connection, wait 30 seconds, re-connect to wifi on your device, re-open app, and try again
Step 5:
Step 6:
Controller will begin its connection process
Name controller and press “Done”
Step 7: Name Bluetooth and input default BT password: “123456”
Press “Confirm”
v2
9
Color Cheat Sheet Color Red
RED %
GREEN %
by
BLUE %
WHITE %
100
Green
100
Blue
100
Warm White Bright White
100 100
100
100
15
Tips from Helpful Herby! Maroon - ish
100
5
Purple
40
100
Light Purple
40
20
100
Soft Purple
40
20
100
Pink
100
65
Dark Pink
100
16
Light Pink
100
Soft Pink
40
30
16
-Soften any color by adding a hint of “WHITE” to the color.
55 12
30
Royal Blue
10
100
Sky Blue
45
100
Turquoise
100
50
Halloween Green
100
20
5
100
15
Yellow
90
90
Gold
90
96
25
Peach
75
30
25
Tangerine
100
58
25
Orange
100
24
Silver
30
30
40
Grey
30
30
40
Mint Green
These Color Codes are specific to Gemstone Lights RGB-WW pixel lights. v2
-Colors like Maroon, Evergreen, Navy Blue are impossible or at least very difficult to create using RGB codes.
10
-When saving colors to your “save squares” or when adding color to lights in custom modes, you can control dimness of colors by simply keeping the percentages lower. (Best dims are usually around 10% or less)
25
10
Extras -Fill in your own color codes for reference! -Identify light numbers in easy to reference locations to speed up Custom program building!
Add Additional Color Codes: RED %
Color
GREEN %
BLUE %
Other Notes:
WHITE %
Useful Light Numbers: Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s): Light #(s):
Location: Location: Location: Location: Location: Location: Location: Location: Location: Location: Location: Location: Location: Location: Location: Location: Location:
v2
11
MyBrilliantSolutions.com Follow Us for Updates & Ideas!
@mybrilliantsolutions
Colorado’s Authorized Dealer of
Additional App Support & Video Tutorials available at: gemstonelights.com/support
v2
12