2021 @HavitLighting
@LightingbyHavit
Lighting By Havit
Lighting
Tel: 02 9381 8300 Fax: 02 9666 8881 Email: sales@havit.com.au web: www.havit.com.au Address: 143 Beauchamp Road Matraville NSW 2036 Australia Postal: PO Box 787 Matraville NSW 2036 Australia
All images and information in this publication are a guide to the displayed product and should be checked with at www.havit.com.au prior to purchase. Information is subject to change without notification at the discretion of Havit Lighting. For further information please contact the team at Havit Lighting. Some fittings within the Havit Lighting catalogue are supplied with complimentary globes. Although Havit Lighting will make every effort to supply the globe shown, another globe may be supplied if models change or a globe is not available. For information about our warranty visit: www.havit.com.au
2021
Lighting By Havit
Lighting
Havit Lighting Catalogue 2021 Issue No. 19 @HavitLighting
@LightingbyHavit
TABLE OF CONTENTS PREMIUM WALL LIGHTS
OTHER WALL LIGHTS
OUTDOOR SPIKE LIGHTS
PAGES 1-14
PAGES 15-26
PAGES 27-52
POND LIGHTS
OUTDOOR BOLLARDS
IN-GROUND & STEP LIGHTS
PAGE 53
PAGES 54-68
PAGES 69-90
DECK LIGHTS
STEP LIGHTS
STEP LIGHTS (CONTINUED)
PAGES 91-100
PAGES 101-122
PAGES 123-148
MASK LIGHT
WALL LIGHTS
BUNKER & FLOOD LIGHTS
PAGE 149
PAGES 150-192
PAGES 193-200
LED SPOT LIGHTS & SENSOR SPOT LIGHTS
2/3/4 HEAD SPOT LIGHTS
PREMIUM DOWNLIGHTS
PAGES 201-204
PAGES 205-210
PAGES 211-220
SURFACE MOUNTED DOWNLIGHTS & PENDANTS
PROLINE PENDANTS
INDOOR WALL LIGHTS
PAGES 221-242
PAGES 243-244
PAGES 245-250
TABLE OF CONTENTS IP66 LED DRIVERS
TRIAC DIMMABLE LED DRIVERS
PAGES 251-274
PAGES 275-276
PAGES 277-278
0-1/10V & DALI DIMMABLE LED DRIVERS
CONSTANT VOLTAGE LED DRIVERS
INFORMATION
LED STRIP CONTROL EQUIPMENT WIFI-104 App
LED Profile by Havit Quick Reference
PAGES 279-280
PAGES 281-282
PAGES 283-284
LED ALUMINIUM PROFILE
INFORMATION
LED STRIP
LED Profile by Havit Strip Compatibility Chart
PAGES 285-335
PAGES 337-338
PAGES 339-358
LED & TRI-COLOUR GLOBES
CANOPIES
ACCESSORIES
PAGES 359-362
PAGES 363-364
PAGES 365-366
INFORMATION
INFORMATION & WARRANTY
NOTES & UPDATES
Lighting by Havit
Lighting by Havit
PAGES 369-372
PAGES 373-376
Tri-Colour By Havit 3000K 4000K 5500K
IP & IK RATING CHART by Havit INGRESS PROTECTION GUIDE IK RATINGS EXPLAINED
PAGES 367-368
2021 @HavitLighting
@LightingbyHavit
Lighting By Havit
85
85
Ø68 110
21 Ø68
125
210
Ø60 22
Fixed Down
Ø60
Up & Down
Tivah 316 Stainless Steel • • • •
Stainless Steel 316 Marine Grade Includes a matching stainless steel backing plate High output reflector to maximise light IP Rating: IP65
IP65
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508 IMAGE
IMAGE
1
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1005T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1007GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1007MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1105T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1107GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1107MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Single Adjustable
175
Ø68
Double Adjustable 22
110
Ø60
Ø100 20
90º Tilt / 270º Swivel 90
90
90
175 110
Ø60
135
Ø60
90º Tilt / 270º Swivel
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508
3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1205T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1207GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1207MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1305T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1307GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1307MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
2
85 85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down Ø60
Up & Down
Weathered Copper
Tivah Solid Copper • • • • •
Solid Copper body Fast weathering for classic aged appearance Includes a matching backing plate High output reflector to maximise light IP Rating: IP65 MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508 IMAGE
IMAGE
3
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1015T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1017GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1017MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1115T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1117GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1117MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
See page 275 for compatible drivers
INCLUDED LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
Double Adjustable 22
110
Ø60
Ø100 20 90
90
90
175 110
Ø60
135
Ø60
90º Tilt / 270º Swivel
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508
3000K 4000K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1215T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1217GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1217MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1315T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1317GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1317MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
4
85 85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down Ø60
Up & Down
Tivah Aluminium Black • • • •
Aluminium Poly Powder Coated Black Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65
IP65
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508 IMAGE
IMAGE
5
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1025T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1027GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1027MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1125T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1127GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1127MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
See page 275 for compatible drivers
INCLUDED LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
Double Adjustable 22
110
Ø60
Ø100 20 90
90
90
175 110
Ø60
135
Ø60
90º Tilt / 270º Swivel
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508
3000K 4000K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1225T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1227GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1227MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1325T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1327GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1327MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
6
85 85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Aluminium White • • • •
Aluminium Poly Powder Coated White Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65
IP65
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508 IMAGE
IMAGE
7
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1035T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1037GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1037MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1135T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1137GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1137MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
See page 275 for compatible drivers
INCLUDED LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
Double Adjustable 22
110
Ø60
Ø100 20 90
90
90
175 110
Ø60
135
Ø60
90º Tilt / 270º Swivel
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508
3000K 4000K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1235T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1237GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1237MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1335T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1337GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1337MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
8
85 85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down Ø60
Up & Down
Tivah Aluminium Silver • • • •
Aluminium Poly Powder Coated Silver Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65
IP65
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508 IMAGE
IMAGE
9
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1045T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1047GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1047MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1145T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1147GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1147MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
See page 275 for compatible drivers
INCLUDED LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
Double Adjustable 22
110
Ø60
Ø100 20 90
90
90
175 110
Ø60
135
Ø60
90º Tilt / 270º Swivel
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508
3000K 4000K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1245T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1247GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1247MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1345T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1347GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1347MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
10
85 85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Aluminium Titanium • • • •
Titanium Coloured Aluminium Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65
IP65
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508 IMAGE
IMAGE
11
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1085T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1087GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1087MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1185T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1187GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1187MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
See page 275 for compatible drivers
INCLUDED LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Single Adjustable 175 90º Tilt / 270º Swivel Ø68
Double Adjustable 22
110
Ø60
Ø100 20 90
90
90
175 110
Ø60
135
Ø60
90º Tilt / 270º Swivel
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508
3000K 4000K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1285T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1287GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1287MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1385T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1387GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1387MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
12
85
85
Ø68 110
21 Ø68
125
210
Ø60 22
Fixed Down Ø60
Up & Down
Tivah Antique Brass • • • •
Solid Brass With Antique Brass Finish Includes a matching brass backing plate High output reflector to maximise light IP Rating: IP65
IP65
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508 IMAGE
IMAGE
13
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1095T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1097GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1097MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1195T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1197GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1197MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
See page 275 for compatible drivers
INCLUDED LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Single Adjustable 175
Ø68
Double Adjustable 22
110
Ø60
Ø100 20
90º Tilt / 270º Swivel 90
90
90
175 110
Ø60
135
Ø60
90º Tilt / 270º Swivel
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes HV9507 & HV9508
3000K 4000K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1295T
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
HV1297GU10T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1297MR16T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1395T
3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
HV1397GU10T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1397MR16T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
14
90 90
75 151
75
232
60
Fixed Down
* Base width 46mm
60 * Base width 46mm
Up & Down Single Adjustable
Piaz Stainless Steel • High Grade 304 Stainless Steel • IP Rating: IP54
193
90º Tilt / 270º Swivel
75
60
123
27 * Base width 46mm
HV9506D
Compatible with Tri-Colour 9in1 3w, 5w, 7w LED Globe IMAGE
IMAGE
IMAGE
15
90
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1071T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1171T
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1271T
3000K 4000K 5500K
270lm 285lm 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 5w GU10 LED INCLUDED LED Tri-Colour 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
85
263
Ø68
22
Ø60
Titanium Aluminium
Highlite Aluminium
Black Aluminium
• Titanium Coloured Aluminium and Aluminium Poly Powder Coated Black
• Includes a matching aluminium backing plate • High grade perspex reflector lens • IP Rating: IP65
HV9506D
Compatible with Tri-Colour 9in1 3w, 5w, 7w LED Globe
IP65
IMAGE
3000K 4000K 5500K
Suitable for use with LED globes only
IMAGE
Tri-Colour By Havit
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1089T-TTM-240V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1089T-BLK-240V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED
Tri-Colour 2x 5w GU10 LED
INCLUDED LED
Tri-Colour 2x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
16
84
84 Ø73
126 110
210
Ø73
20
Ø60
Fixed Down 20
Ø60
Up & Down
Fortis Stainless Steel • High Grade 304 Stainless Steel • IP Rating: IP54
HV9506D
Compatible with Tri-Colour 9in1 3w, 5w, 7w LED Globe IMAGE
IMAGE
17
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1072T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1172T
3000K 4000K 5500K
270lm 285lm 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Single Adjustable
110
90
20 Ø73
Ø60
Double Adjustable
174
90º Tilt / 270º Swivel
Ø100 21
90
90 175 110
Ø60
Ø60 135
90º Tilt / 270º Swivel
HV9506D
Compatible with Tri-Colour 9in1 3w, 5w, 7w LED Globe IMAGE
IMAGE
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1272T
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1372T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED Tri-Colour 5w GU10 LED INCLUDED LED Tri-Colour 2x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
18
65
Ø40
Ø60 83 22 Ø40
Ø60
135
22
Mini Fixed Down
65
Mini Up & Down
Tivah Mini 316 Stainless Steel • • • •
316 Stainless Steel
INDOOR/OUTDOOR WEATHERPROOF
High output reflector to maximise light IP Rating: IP65 IMAGE
IMAGE
19
IP65
Includes a matching backing plate
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1007MR11NW
3000K + 4000K
2x 270lm + 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1107MR11NW
3000K + 4000K
270lm + 300lm
12v DC
INCLUDED LED
2x 3w 3000k MR11 LED + 2x 3w 4000k MR11 LED See page 275 for compatible drivers
INCLUDED LED
3w 3000k MR11 LED + 3w 4000k MR11 LED See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Mini Single Adjustable
130
Ø60
Mini Double Adjustable
Ø40
Ø78 22
22 90°Tilt / 270° Swivel
133 90°Tilt / 270° Swivel
90°Tilt / 270° Swivel
Ø40
Ø40
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1207MR11NW
3000K + 4000K
270lm + 300lm
12v DC
3w 3000k MR11 LED + 3w 4000k MR11 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1307MR11NW
3000K + 4000K
2x 270lm + 2x 300lm
12v DC
2x 3w 3000k MR11 LED + 2x 3w 4000k MR11 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
20
65
Ø40
Ø60 83 22 Ø40
Ø60
135
22
Mini Fixed Down
65
Mini Up & Down
Tivah Mini Aluminium Black • • • •
Aluminium Poly Powder Coated Black
INDOOR/OUTDOOR WEATHERPROOF
High output reflector to maximise light IP Rating: IP65 IMAGE
IMAGE
21
IP65
Includes a matching aluminium backing plate
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1027MR11NW
3000K + 4000K
2x 270lm + 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1127MR11NW
3000K + 4000K
270lm + 300lm
12v DC
INCLUDED LED
2x 3w 3000k MR11 LED + 2x 3w 4000k MR11 LED See page 275 for compatible drivers
INCLUDED LED
3w 3000k MR11 LED + 3w 4000k MR11 LED See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
Mini Single Adjustable
130
Ø60
Mini Double Adjustable
Ø40
Ø78 22
22 90°Tilt / 270° Swivel
133 90°Tilt / 270° Swivel
90°Tilt / 270° Swivel
Ø40
Ø40
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1227MR11NW
3000K + 4000K
270lm + 300lm
12v DC
3w 3000k MR11 LED + 3w 4000k MR11 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1327MR11NW
3000K + 4000K
2x 270lm + 2x 300lm
12v DC
2x 3w 3000k MR11 LED + 2x 3w 4000k MR11 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
22
Tivah Maxi 316 Stainless Steel • • • •
316 Stainless Steel
INDOOR/OUTDOOR WEATHERPROOF
High output reflector to maximise light
IMAGE
IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
IP Rating: IP65 IMAGE
23
IP65
Includes a matching backing plate
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1008T
3000K 4000K 5500K
240v
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1108T
3000K 4000K 5500K
240v
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1208T
3000K 4000K 5500K
240v
2x 1080lm 2x 1140lm 2x 1200lm
1080lm 1140lm 1200lm
1080lm 1140lm 1200lm
INCLUDED LED
Tri-Colour Built-in 2x 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
113
Ø85
250
28
Ø75
Maxi Up & Down
Maxi Single Adjustable Maxi Fixed Down
90º Tilt / 270º Swivel
113
Ø85
Ø75
Ø85
136
150
136
28
218
28
Ø75
90
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
24
Tivah Maxi Aluminium Black • • • •
Aluminium Poly Powder Coated Black
INDOOR/OUTDOOR WEATHERPROOF
High output reflector to maximise light
IMAGE
IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
IP Rating: IP65 IMAGE
25
IP65
Includes a matching aluminium backing plate
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1028T
3000K 4000K 5500K
240v
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1128T
3000K 4000K 5500K
240v
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1228T
3000K 4000K 5500K
240v
2x 1080lm 2x 1140lm 2x 1200lm
1080lm 1140lm 1200lm
1080lm 1140lm 1200lm
INCLUDED LED
Tri-Colour Built-in 2x 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Spot Lights
113
Ø85
250
28
Ø75
Maxi Up & Down
Maxi Single Adjustable Maxi Fixed Down
90º Tilt / 270º Swivel
113
Ø85
Ø75
Ø85
136
150
136
28
218
28
Ø75
90
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
26
Pointe 316 Stainless Steel • • • • •
Single adjustable spike spotlight Stainless Steel 316 Marine Grade 2x 238mm spike length (total 476mm) 2m reinforced cable IP Rating: IP65
90
63 86
150
90º Tilt / 270º Swivel
238
626
238
INDOOR/OUTDOOR WEATHERPROOF
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
27
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1401T
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
Eden 316 Stainless Steel • • • • •
Single adjustable spike spotlight Stainless Steel 316 Marine Grade 245mm spike length 2m reinforced cable IP Rating: IP65
90
63 111 155 90º Tilt / 270º Swivel
400
245
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
12v DC
24v DC
HV9507
HV9508
3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1402T
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
28
Fortis Stainless Steel • • • • •
Single adjustable spike spotlight High Grade 304 Stainless Steel 285mm spike length 2m reinforced cable IP Rating: IP54
90º Tilt / 270º Swivel
Ø60
110 90
394 285
IP54
INDOOR/OUTDOOR WEATHERPROOF
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
29
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1409T
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
Eden Copper • • • • • •
Single adjustable spike spotlight Solid Copper Fast weathering for classic aged appearance Spike length: 245mm 2m reinforced cable IP Rating: IP65
90
63
Weathered Copper
111
155
90º Tilt / 270º Swivel 400
245
IP65
INDOOR/OUTDOOR WEATHERPROOF
12v DC
24v DC
HV9507
HV9508
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1412T
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
30
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
31
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1403T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1405T-SS316
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1407T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
INCLUDED LED
Tri-Colour 2x 5w MR16 LED See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
Tivah 316 Stainless Steel • • • • • •
Adjustable spike spotlight Stainless Steel 316 Marine Grade Internal cable 405mm & 1000mm spike length 2m reinforced cable IP Rating: IP65
180 60 220 405
90
110 90º Tilt / 270º Swivel
185
180 110
600
1000
400
90
340
90
90
60
60 110
90º Tilt / 270º Swivel
600
90º Tilt / 270º Swivel
1000
400
HV1407T-SS316 Single Adjustable
HV1403T-SS316 Single Adjustable
HV1405T-SS316 Double Adjustable
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
32
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
33
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1403T-CP
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1405T-CP
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1413T
3000K 4000K 5500K
270lm 285lm 300lm
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
INCLUDED LED
Tri-Colour 2x 5w MR16 LED See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
Tivah Solid Copper • • • • • • •
Adjustable spike spotlight Solid Copper Fast weathering for classic aged appearance Internal cable 405mm & 1000mm spike length 2m reinforced cable IP Rating: IP65
Weathered Copper
180 60 220 405
90
110 90º Tilt / 270º Swivel
185
180 110
600
1000
400
90
340
90
90
60
60 110
90º Tilt / 270º Swivel
600
90º Tilt / 270º Swivel
1000
400
HV1413T Single Adjustable
HV1403T-CP Single Adjustable
HV1405T-CP Double Adjustable
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
34
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
35
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1403T-AB
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1405T-AB
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1407T-AB
3000K 4000K 5500K
270lm 285lm 300lm
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
INCLUDED LED
Tri-Colour 2x 5w MR16 LED See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
Tivah Antique Brass • • • • • •
Adjustable spike spotlight Solid Brass With Antique Brass Finish Internal cable 405mm & 1000mm spike length 2m reinforced cable IP Rating: IP65
180 60 220 405
90
110 90º Tilt / 270º Swivel
185
180 110
600
1000
400
90
340
90
90
60
60 110
90º Tilt / 270º Swivel
600
90º Tilt / 270º Swivel
1000
400
HV1407T-AB Single Adjustable
HV1403T-AB Single Adjustable
HV1405T-AB Double Adjustable
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
36
Pointe Aluminium Black • • • • •
Single adjustable spike spotlight Aluminium Poly Powder Coated Black 2x 238mm spike length (total 476mm) 2m reinforced cable IP Rating: IP65
90
63 86
150
90º Tilt / 270º Swivel
238
626
238
INDOOR/OUTDOOR WEATHERPROOF
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
37
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1421T
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights Tivah Aluminium Black • • • • •
Single adjustable spike spotlight Aluminium Poly Powder Coated Black 285mm spike length 2m reinforced cable IP Rating: IP65
90º Tilt / 270º Swivel
Ø60
110 90
394 285
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
12v DC
24v DC
HV9507
HV9508
3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1427T
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
38
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
39
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1423T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1425T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1407T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
INCLUDED LED
Tri-Colour 2x 5w MR16 LED See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
Tivah Aluminium Black • • • • • •
Adjustable spike spotlight Aluminium Poly Powder Coated Black Internal cable 405mm & 1000mm spike length 2m reinforced cable IP Rating: IP65
180 60 220 405
90
110 90º Tilt / 270º Swivel
185
180 110
600
1000
400
90
340
90
90
60
60 110
90º Tilt / 270º Swivel
600
90º Tilt / 270º Swivel
1000
400
HV1407T-BLK Single Adjustable
HV1423T Single Adjustable
HV1425T Double Adjustable
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
40
Tivah Mini Spike • Single adjustable spike spotlight • 316 Stainless Steel and Aluminium Poly Powder Coated Black
• 140mm spike length • 1m reinforced cable • IP Rating: IP65
Ø40 70
255 140
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
41
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1426NW-SS316
3000K + 4000K
270lm + 300lm
12v DC
3w 3000k MR11 LED + 3w 4000k MR11 LED
HV1426NW-BLK
3000K + 4000K
270lm + 300lm
12v DC
3w 3000k MR11 LED + 3w 4000k MR11 LED
See page 275 for compatible drivers
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights Spitze Aluminium Black • • • • •
Single adjustable spike spotlight Aluminium Poly Powder Coated Black Spike length: 162mm 1m reinforced cable IP Rating: IP65
ø60
94
90°Tilt/ 270°Swivel
56
162
IP65
INDOOR/OUTDOOR WEATHERPROOF
Single Adjustable IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1428C
5500K
320lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1428N
4000K
300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1428W
3000K
275lm
12v DC
INCLUDED LED
Built in 3w COB
See page 275 for compatible drivers
INCLUDED LED
Built in 3w COB
See page 275 for compatible drivers
INCLUDED LED
Built in 3w COB
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
42
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1429C-7W
5500K
595lm
INPUT
12v DC
IMAGE
HV1429W-7W
3000K
560lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1429C-12W
5500K
1080lm
INPUT
12v DC
IMAGE
43
HV1429W-12W
3000K
960lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1429T-24W
3000K 4000K 5500K
1900lm 1970lm 2040lm
INPUT
12v DC
INCLUDED LED
Built-in 7w COB See page 275 for
compatible drivers
INCLUDED LED
Built-in 12w COB See page 275 for
compatible drivers
INCLUDED LED
Tri-Colour Built-in 24w COB See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights Oasis Aluminium Black • • • • •
Single adjustable spike spotlight Aluminium Poly Powder Coated Black Spike length: 260mm 1m reinforced cable IP Rating: IP65 90
57
85
90º Tilt
260
90
HV1429-7W Single Adjustable
75
90º Tilt
104
260
90
88
90º Tilt
HV1429-12W Single Adjustable
113
260
HV1429T-24W Single Adjustable All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
44
110
34
110 295
163
295
163
HV1431T Spike and surface mounted with hood
Kap 316 Stainless Steel
HV1432T Spike and surface mounted
• • • •
Stahl 316 Stainless Steel
Spike and surface mounted spot light with hood Stainless Steel 316 Marine Grade 400mm reinforced cable
• • • •
IP Rating: IP66
12v DC
24v DC
HV9507
HV9508
Stainless Steel 316 Marine Grade 400mm reinforced cable IP Rating: IP66
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
45
Spike and surface mounted spot light
IP66
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1431T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1432T
3000K 4000K 5500K
270lm 285lm 300lm
INCLUDED LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
INCLUDED LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
IP44
INDOOR/OUTDOOR WATER RESISTANT
Vidro 316 Stainless Steel
38
• • • •
100
Garden spike light Stainless Steel 316 Marine Grade IP Rating: IP44 Garden spike light 6 pack Kit Includes: – 6x single spike lights – 15m of Cable
400
– 6x 1.5w LED globes
260
300
– 1x LED driver 57 37
35
45
80 93
IMAGE
56
46
PART NUMBER
COLOUR TEMP
LUMENS
HV1437C
5500K
110lm
INPUT
12v DC
IMAGE
HV1437W
3000K
90lm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1438C
5500K
6x 110lm
HV1438W
3000K
6x 90lm
240v Driver 12v DC Fitting
INCLUDED LED 1.5w G4 SMD Bi pin See page 275 for compatible drivers
INCLUDED LED 6 x 1.5w G4 Bi pin + driver
Max 2 additional fittings (HV1437) can be added to the kit(HV1438). Total 8 fittings with supplied driver. Larger kits can be configured using alternate Havit LED drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
46
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1458T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1451T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1454C
5500K
260lm 12v DC
3.2w G4 SMD Bi pin
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
See page 275 for
compatible drivers
IMAGE
HV1454W
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1455C
5500K
260lm
INPUT
INCLUDED LED
12v DC
3.2w G4 SMD Bi pin See page 275 for
compatible drivers
HV1455W
47
3000K
240lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
Antique Brass
ø54
• • • • •
Garden lights with spike Solid Brass With Antique Brass Finish Spike length: 225mm 1m reinforced cable IP Rating: IP54
90º
0
13
174
90°Tilt /270° Swivel
54
365
90º Tilt
225
Ø38
172mm
190mm
563mm
560mm
225mm
225mm
Ø38
HV1458T Shawl
HV1451T Laiton
HV1454 Antic
Ø38
HV1455 Forn
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
48
168
25x25
725
225
Nedia • • • • •
316 Stainless Steel (SS316)
Black Aluminium (BLK)
Bollard Spike Light Alumnium Black, Antique Brass and 316 Stainless Steel
IP54
Spike Length: 225mm
INDOOR/OUTDOOR WEATHERPROOF
1m Reinforced cable IP Rating: IP54 IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1459T-SS316
3000K 4000K 5500K
500lm 525lm 550lm
3000K 4000K 5500K
500lm 525lm 550lm
3000K 4000K 5500K
500lm 525lm 550lm
HV1459T-AB
HV1459T-BLK
49
Antique Brass (AB)
INPUT
12v DC
INCLUDED LED Tri-Colour Built-in 7w LED See page 275 for
compatible drivers
12v DC
Tri-Colour Built-in 7w LED See page 275 for
compatible drivers
12v DC
Tri-Colour Built-in 7w LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights Nova • Single adjustable spike spotlight • 316 Stainless Steel and Aluminium Poly Powder Coated Black
• Spike length: 170mm • 1m reinforced cable • IP Rating: IP65 ø60 110
90ºTilt
73
170
12v DC
HV9507
24v DC
HV9508
IMAGE
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1462T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV1462RGBW-SS316
RGB +3000K
N/A
12v DC
HV1462T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV1462RGBW-BLK
RGB +3000K
N/A
12v DC
INCLUDED LED 5w MR16 LED See page 275 for
compatible drivers
Built-in 5w LED See page 275 for
compatible drivers
5w MR16 LED See page 275 for
compatible drivers
Built-in 5w LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
50
Tivah Titanium Aluminium • • • • •
Single adjustable spike spotlight Titanium Coloured Aluminium Spike length: 2 x 238mm (total 476mm) 2m reinforced cable IP Rating: IP65
o
o
90 Tilt / 270 Swivel 58
110
174
o
64
90
238
650
238
12v DC
HV9507
24v DC
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
51
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1487T
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Garden Lights
Highlite Aluminium • Single fixed spike light • Titanium Coloured Aluminium and Aluminium Poly Powder Coated Black
• • • •
High grade perspex reflector lens 2m reinforced cable Spike length: 400mm IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Ø38 Tri-Colour By Havit 3000K
132
4000K 5500K
532 400
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
Suitable for use with LED globes only
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1489T-TTM
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1489T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
INCLUDED LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
INCLUDED LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
52
180
85
13 93
110 180º Tilt
100
90+º
70
148
Ø115
90+º Tilt
Onder 316 Stainless Steel • • • •
Submersible pond light Stainless Steel 316 Marine Grade Optional Garden Spike Available - HV350-SPK
6 metre cable IP Rating: IP68
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IP68
Sotto 316 Stainless Steel • • • • •
Tri-Colour By Havit 3000K
OUTDOOR SUMBERSIBLE
4000K 5500K
IMAGE
IMAGE
Submersible pond light or garden light Stainless Steel 316 Marine Grade HV1494RGB must use suitable Havit RGB control gear 6 metre cable IP Rating: IP68
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1491T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1494C
5500K
975lm
HV1494W
3000K
873lm
HV1494RGB
RGB
NA
12v DC
HV1494-REM
RGB
NA
12v DC
INCLUDED LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
INCLUDED LED Built-in 15w LED See page 275 for
compatible drivers
Built-in 15w LED See page 275 for
compatible drivers
Remote and Receiver
OPTIONAL ACCESSORIES HV350-SPK
53
Optional Garden Spike to suit HV1494 Models All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Bollard Lights
Tivah • Double adjustable bollard spotlight • Stainless Steel 316 Marine Grade and Aluminium Poly Powder Coated Black
• IP Rating: IP65
177 90º Tilt / 270º Swivel
IP65
50 50
60 110
INDOOR/OUTDOOR WEATHERPROOF
90
90
Tri-Colour By Havit 3000K 4000K 5500K
900
240v
12v DC
24v DC
HV9506D
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v,24v or 240v LED Globe IMAGE
6 96
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1507T-SS316-240V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1507T-SS316-12V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
HV1507T-BLK-240V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1507T-BLK-12V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
See page 275 for
compatible drivers
See page 275 for
compatible drivers
OPTIONAL ACCESSORIES 85
HV1607
• • • •
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
54
240v
12v DC
HV9506D
HV9507
24v DC
HV9508
IMAGE
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v,24v or 240v LED Globe
Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1601T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
240v
HV1602T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV1601T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
240v
HV1602T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV1601T-TTM
3000K 4000K 5500K
270lm 285lm 300lm
240v
HV1602T-TTM
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV1601T-AB
3000K 4000K 5500K
270lm 285lm 300lm
240v
HV1602T-AB
3000K 4000K 5500K
270lm 285lm 300lm
INCLUDED LED Tri-Colour 5w GU10 LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w GU10 LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w GU10 LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w GU10 LED Tri-Colour 5w MR16 LED
12v DC
See page 275 for
compatible drivers
OPTIONAL ACCESSORIES 63
HV1603-SS316 HV1603-BLK
• • • •
Highlite bollard extension 380mm total extension height IP Rating: As per fitting used Up to 2 extensions can be used
380
HV1603-AB 85
HV1607
• • • •
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
55
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Bollard Lights
63
445 385
83
316 Stainless Steel (SS316)
Black Aluminium (BLK)
Titanium Aluminium (TTM)
Antique Brass (AB)
Highlite •
LED bollard light
•
High grade perspex reflector lens
•
2m reinforced cable
•
445mm height
•
Raised lamp height to maximise light output
•
IP Rating: IP54
•
To be used with LED globes only
825
Shown With Optional Extension All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
56
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1605T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1605T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1606T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1606T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1608T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1608T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
OPTIONAL ACCESSORIES 85
HV1607
• • • •
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
57
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Bollard Lights
Mini & Maxi 316 Stainless Steel • • • • •
Stainless Steel 316 Marine Grade Frosted diffuser 190mm, 600mm & 900mm height IP Rating: IP54 IK Rating: IK08
63
63
900
600
63 190
Ø102
Ø102
Ø102
Mini HV1605T-SS316
Maxi 600 HV1606T-SS316
Maxi 900 HV1608T-SS316
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
58
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1605T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1605T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1606T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1606T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1608T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1608T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
OPTIONAL ACCESSORIES 85
HV1607
• • • •
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
59
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Bollard Lights
Mini & Maxi Stainless Steel Black • • • • •
Stainless Steel Poly Powder Coated Black Frosted diffuser 190mm, 600mm & 900mm height IP Rating: IP54 IK Rating: IK08
63
63
900
600
63 190
Ø102
Ø102
Ø102
Mini HV1605T-BLK
Maxi 600 HV1606T-BLK
Maxi 900 HV1608T-BLK
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
60
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1615T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1615T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1616T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1616T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1618T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1618T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
OPTIONAL ACCESSORIES 85
HV1607
• • • •
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
61
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Bollard Lights
Mini & Maxi Louvre 316 Stainless Steel • • • • •
Stainless Steel 316 Marine Grade Clear diffuser with louvres 190mm, 600mm & 900mm height IP Rating: IP54 IK Rating: IK08
63
63
900
600
63
190
Ø102
Ø102
Ø102
Mini Louvre HV1615T-SS316
Maxi Louvre 600 HV1616T-SS316
Maxi Louvre 900 HV1618T-SS316
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
62
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1615T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1615T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1616T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1616T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1618T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1618T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
OPTIONAL ACCESSORIES 85
HV1607
• • • •
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
63
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Bollard Lights Mini & Maxi Louvre Stainless Steel Black • • • • •
Stainless Steel Poly Powder Coated Black Clear diffuser with louvres 190mm, 600mm & 900mm height IP Rating: IP54 IK Rating: IK08
63
63
900
600
63
190
Ø102
Ø102
Ø102
Mini Louvre HV1615T-BLK
Maxi Louvre 600 HV1616T-BLK
Maxi Louvre 900 HV1618T-BLK
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
64
Highlite Aluminium Black • • • • • •
LED Bollard light Aluminium Poly Powder Coated Black Opal Polycarbonate Lens 464mm Height IP Rating: IP65 IK Rating: IK08
63
HV1622T-BLK +
464
825
HV1622-BLK-EXT
388
IP65
INDOOR/OUTDOOR WEATHERPROOF
Shown With Optional Extension
84
IMAGE
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1622T-BLK-240V
3000K 4000K 5500K
970lm 915lm 860lm
240v
HV1622T-BLK-12V
3000K 4000K 5500K
970lm 915lm 860lm
12v DC
INCLUDED LED Tri-Colour Built-in 12w SMD Tri-Colour Built-in 12w SMD See page 275 for
compatible drivers
HV1607
HV1622-BLK-EXT • • • • •
Tri-Colour By Havit 3000K
Bollard light extension Aluminium Poly Powder coated black 380mm Height IP Rating: as per HV1622-BLK Up to 2 extensions can be used
63
380
• • • •
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
85
400
32
65
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Bollard Lights Black Aluminium LED Bollard Lights Highlite Aluminium Black • • • • • • •
LED Bollard light Aluminium Poly Powder Coated Black High grade perspex lens 600mm and 1000mm height Selectable wattage - 18w or 24w IP Rating: IP65 IK Rating: IK08
IP65
INDOOR/OUTDOOR WEATHERPROOF
120
Tri-Colour By Havit 3000K 4000K 5500K
120
1000
600
HV1625T-BLK-240V HV1625T-BLK-24V
IMAGE
HV1626T-BLK-240V HV1626T-BLK-24V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1625T-BLK-240V
3000K 4000K 5500K
1900lm 1970lm 2040lm
240v
HV1625T-BLK-24V
3000K 4000K 5500K
1900lm 1970lm 2040lm
24v DC
HV1626T-BLK-240V
3000K 4000K 5500K
1900lm 1970lm 2040lm
240v
HV1626T-BLK-24V
3000K 4000K 5500K
1900lm 1970lm 2040lm
24v DC
INCLUDED LED Tri-Colour Built-in 24w SMD Tri-Colour Built-in 24w SMD
See page 276 for compatible drivers
Tri-Colour Built-in 24w SMD Tri-Colour Built-in 24w SMD
See page 276 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
66
Divad Aluminium Black • • • • • •
120x120
Square LED Bollard light Aluminium Poly Powder Coated Black Polycarbonate diffuser 600mm and 1000mm height IP Rating: IP65 IK Rating: IK08
120x120
1000
600
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K
HV1629T-BLK-240V-SQ HV1629T-BLK-24V-SQ
IMAGE
67
4000K
HV1628T-BLK-240V-SQ HV1628T-BLK-24V-SQ
5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1628T-BLK-240V-SQ
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
HV1628T-BLK-24V-SQ
3000K 4000K 5500K
960lm 1020lm 1080lm
24v DC
HV1629T-BLK-240V-SQ
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
HV1629T-BLK-24V-SQ
3000K 4000K 5500K
960lm 1020lm 1080lm
24v DC
INCLUDED LED Tri-Colour Built-in 12w SMD Tri-Colour Built-in 12w SMD
See page 276 for compatible drivers
Tri-Colour Built-in 12w SMD Tri-Colour Built-in 12w SMD
See page 276 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Bollard Lights Divad Aluminium Black • • • • • •
Round LED bollard light Aluminium Poly Powder Coated Black Glass diffuser
ø120
600mm and 1000mm height IP Rating: IP65 IK Rating: IK08
ø120
1000
600
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K
HV1628T-BLK-240V-RND HV1628T-BLK-24V-RND
5500K
IMAGE
HV1629T-BLK-240V-RND HV1629T-BLK-24V-RND
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1628T-BLK-240V-RND
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
HV1628T-BLK-24V-RND
3000K 4000K 5500K
960lm 1020lm 1080lm
24v DC
HV1629T-BLK-240V-RND
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
HV1629T-BLK-24V-RND
3000K 4000K 5500K
960lm 1020lm 1080lm
24v DC
INCLUDED LED Tri-Colour Built-in 12w SMD Tri-Colour Built-in 12w SMD
See page 276 for compatible drivers
Tri-Colour Built-in 12w SMD Tri-Colour Built-in 12w SMD
See page 276 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
68
Metro 316 Stainless Steel • • • • • • • • •
Inground uplighter square Stainless Steel 316 Marine Grade cover Flush tempered glass Trafficable to 600Kg Face: 120mm x 120mm Installation depth: 155mm IK Rating: IK08 IP Rating: IP65 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø110
12
Cutout without Canister Ø100 120x120
4
4 155
CANISTER
100
75
85
240v
12v DC
HV9506
HV9507
24v DC
HV9508
IMAGE
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v,24v or 240v LED Globe
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1701T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
3000K 4000K 5500K
270lm 285lm 300lm
240v
HV1706T
69
IP65
INDOOR/OUTDOOR WEATHERPROOF
24
INPUT
INCLUDED LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights
Metro 316 Stainless Steel • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Flush tempered glass Trafficable to 600Kg Face diameter: 120mm Installation depth: 155mm IK Rating: IK08 IP Rating: IP65 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø110
12
Cutout without Canister Ø100 Ø120
4
4 155
100
CANISTER
75
85
240v
HV9506
12v DC
HV9507
IMAGE
24v DC
HV9508
24
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v,24v or 240v LED Globe
IP65
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1801T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
3000K 4000K 5500K
270lm 285lm 300lm
240v
HV1806T
Tri-Colour By Havit 3000K
INPUT
INCLUDED LED Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
Tri-Colour 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
70
Luta 316 Stainless Steel • • • • • • • • • •
Adjustable square inground uplighter S tainless Steel 316 Marine Grade cover 30º Tilt Trafficable to 500Kg Flush Tempered glass Face: 108x108mm Installation depth needed: 160mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø104
151
18
Cutout without Canister Ø98 108x108 4 8 113
CANISTER
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
71
11
68
75
IP67
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1825T-SQ
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights
Luta 316 Stainless Steel • • • • • • • • • •
Adjustable round inground uplighter S tainless Steel 316 Marine Grade cover 30º Tilt Trafficable to 500Kg Flush Tempered glass Face diameter: 108mm Installation depth needed: 160mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø104
151
18
Cutout without Canister Ø98 Ø108 4 8 113
CANISTER
68
75
12v DC
HV9507
24v DC
HV9508
IMAGE
11
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IP67
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1825T
3000K 4000K 5500K
270lm 285lm 300lm
INPUT
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
72
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1827C
5500K
300lm
INPUT
12v DC
IMAGE
HV1827W
3000K
270lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1828C
5500K
500lm
INPUT
12v DC
IMAGE
HV1828W
3000K
450lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1829C
5500K
1800lm
INPUT
24v DC
HV1829W
73
3000K
INCLUDED LED
Built-in 3w See page 275 for
compatible drivers
INCLUDED LED
Built-in 5w See page 275 for
compatible drivers
INCLUDED LED
Built-in 20w See page 276 for
compatible drivers
1600lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights Toldo 316 Stainless Steel • • • • • • • • • • •
djustable round inground uplighter A Stainless Steel 316 Marine Grade cover 30º Beam angle Trafficable to 1000Kg Flush Tempered glass Installation depth HV1827: 160mm Installation depth HV1828: 220mm Installation depth HV1829: 290mm
Cutout with Canister Ø104
151
18
Cutout without Canister Ø98 Ø108 4 8 113
CANISTER
IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
75
68
Face: 108mm Tilt: 20º
11
IP67
INDOOR/OUTDOOR WEATHERPROOF
Cutout with Canister Ø147
Cutout without Canister Ø138 Ø160
210
4
170
181
CANISTER
11 100
110
Cutout with Canister Ø218
Cutout without Canister Ø212
Ø218
CANISTER
Face: 160mm Tilt: 30º
Ø230
283
215
4.5
200
165
Face: 230mm Tilt: 15º
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
74
Klip 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 120° Flush tempered glass Trafficable to 1000Kg Face diameter: 100mm Installation depth: 145mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø90
Cutout without Canister Ø85 Ø100 8
140
113
CANISTER
IP67
INDOOR/OUTDOOR WEATHERPROOF
64
89
IMAGE
4
PART NUMBER
COLOUR TEMP
LUMENS
HV1831C-12V
5500K
630lm
HV1831W-12V
3000K
560lm
HV1831C-240V
5500K
630lm
HV1831W-240V
3000K
560lm
INPUT 12v DC
240v
INCLUDED LED Built-in 7w See page 275 for
compatible drivers
Built-in 7w
OPTIONAL ACCESSORIES
HV1831-F-SH
HV1831-HC
75
316 Stainless Steel Security Face with screw holes to suit HV1831 range
Honeycomb glare reduction lens to suit HV1831 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights Klip 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 120° Flush tempered glass Trafficable to 1000Kg Face diameter: 160mm Installation depth: 120mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø143
Cutout without Canister Ø136 Ø160
5 12
CANISTER
115
102
90
Ø115
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1832C-12V
5500K
900lm
HV1832W-12V
3000K
800lm
HV1832C-240V
5500K
900lm
HV1832W-240V
3000K
800lm
INPUT 12v DC
240v
INCLUDED LED Built-in 10w See page 275 for
compatible drivers
Built-in 10w
OPTIONAL ACCESSORIES
HV1832-F-SH
HV1832-HC
316 Stainless Steel Security Face with screw holes to suit HV1832 range
Honeycomb glare reduction lens to suit HV1832 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
76
Klip 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 120° Flush tempered glass Trafficable to 1000Kg Face diameter: 210mm Installation depth: 115mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
IP67
INDOOR/OUTDOOR WEATHERPROOF
Cutout without Canister Ø188
Cutout with Canister Ø194
CANISTER
Ø210
110
73
57
Ø142
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1833C-12V
5500K
1800lm
HV1833W-12V
3000K
1600lm
HV1833C-240V
5500K
1800lm
HV1833W-240V
3000K
1600lm
4 12
INPUT 12v DC
240v
13
INCLUDED LED Built-in 20w See page 275 for
compatible drivers
Built-in 20w
OPTIONAL ACCESSORIES
HV1833-F-SH
HV1833-HC
77
316 Stainless Steel Security Face with screw holes to suit HV1833 range
Honeycomb glare reduction lens to suit HV1833 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights
Klip 316 Stainless Steel • • • • • • • • • •
Inground uplighter round narrow beam Stainless Steel 316 Marine Grade cover Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 210mm
IP67
Installation depth: 275mm
INDOOR/OUTDOOR WEATHERPROOF
IK Rating: IK10 IP Rating: IP67
NOTE: Adequate drainage must be allowed
Cutout without Canister Ø187 Ø210
Cutout with Canister Ø198 4
CANISTER
270
7
219
208
Ø131
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1834C-12V
5500K
2700lm
HV1834W-12V
3000K
2400lm
HV1834C-240V
5500K
2700lm
HV1834W-240V
3000K
2400lm
INPUT 12v DC
240v
INCLUDED LED Built-in 30w See page 275 for
compatible drivers
Built-in 30w
OPTIONAL ACCESSORIES
HV1834-F-SH
HV1834-HC
316 Stainless Steel Security Face with screw holes to suit HV1834 range
Honeycomb glare reduction lens to suit HV1834 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
78
Klip 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 120° Flush tempered glass Trafficable to 1000Kg Face diameter: 260mm Installation depth: 130mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø238
Cutout without Canister Ø232 Ø260
CANISTER
4 12
120
62
Ø195
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1835C-12V
5500K
2700lm
HV1835W-12V
3000K
2400lm
HV1835C-240V
5500K
2700lm
HV1835W-240V
3000K
2400lm
INPUT 12v DC
240v
INCLUDED LED Built-in 30w See page 275 for
compatible drivers
Built-in 30w
OPTIONAL ACCESSORIES
HV1835-F-SH
HV1835-HC
79
316 Stainless Steel Security Face with screw holes to suit HV1835 range
Honeycomb glare reduction lens to suit HV1835 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights
Split 316 Stainless Steel • • • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Full stainless steel body Anti glare honeycomb louvre Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 100mm Installation depth: 75mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister Ø83 Ø100
Cutout with Canister Ø89
4
12 CANISTER
34
71 13
Ø62
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1841C
5500K
300lm
INPUT
12v DC HV1841W
3000K
INCLUDED LED
Built-in 3w See page 275 for
compatible drivers
240lm
OPTIONAL ACCESSORIES
HV1841 - FSH
Security Face with screw holes to suit HV1841 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
80
Split 316 Stainless Steel • • • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Full stainless steel body Anti glare honeycomb louvre Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 150mm Installation depth: 115mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister Ø135 Ø150
Cutout with Canister Ø138 CANISTER
22
110
4 6
30
Ø92mm
13
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1842C
5500K
450lm
INPUT
12v DC HV1842W
3000K
INCLUDED LED
Built-in 5w See page 275 for
compatible drivers
400lm
OPTIONAL ACCESSORIES
HV1842-F-SH
81
Security Face with screw holes to suit HV1842 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights
Split 316 Stainless Steel • • • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Full stainless steel body Anti glare honeycomb louvre Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 210mm Installation depth: 110mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø195
Cutout without Canister Ø185 Ø210 5
5
CANISTER
21
110
49 13
Ø103mm
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1843C
5500K
1200lm
INPUT
12v DC HV1843W
3000K
INCLUDED LED
Built-in 12w See page 275 for
compatible drivers
960lm
OPTIONAL ACCESSORIES
HV1843-F-SH
Security Face with screw holes to suit HV1843 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
82
Split 316 Stainless Steel • • • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Full stainless steel body Anti glare honeycomb louvre Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 260mm Installation depth: 118mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø237
Cutout without Canister Ø213 Ø260 5
8
CANISTER
22
118
45 13
Ø180
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1845C
5500K
1350lm
INPUT
12v DC HV1845W
3000K
INCLUDED LED
Built-in 18w See page 275 for
compatible drivers
1200lm
OPTIONAL ACCESSORIES
HV1845-F-SH
83
Security Face with screw holes to suit HV1845 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights
Split 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 6° Flush tempered glass Trafficable to 1000Kg Face diameter: 210mm Installation depth: 120mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø194
Cutout without Canister Ø182 Ø210 5
CANISTER
111
74 28
Ø145
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1847C
5500K
1900lm
INPUT
12v DC HV1847W
3000K
INCLUDED LED
Built-in 24w See page 275 for
compatible drivers
1600lm
OPTIONAL ACCESSORIES
HV1847-F-SH
Security Face with screw holes to suit HV1847 range
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
84
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV19012T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HV19032T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19012T-CP
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19012T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
HV190-HC
Honeycomb Lens to suit HV19012, HV19022, HV19032 & HV19042
See page 275 for compatible drivers
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for compatible drivers
OPTIONAL ACCESSORIES
85
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights Ollo
Cutout with Canister Ø87
• Recessed wall/step light with eyelid • Stainless Steel, Solid Copper Or Black Face With
Cutout without Canister Ø63 100
125
Marine Grade 316 Stainless Steel Body
• • • •
Tempered glass
Ø67
CANISTER
Ø92
Ø87 Ø63 17
Installation depth needed: 125mm IP Rating: IP65
8
13
78
5
Not suitable for in-ground use.
Stainless Steel 316
Stainless Steel 316 Black
Weathered Copper
Solid Copper
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
86
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19022T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV19042T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19022T-CP
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19022T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
HV190-HC
Honeycomb Lens to suit HV19012, HV19022, HV19032 & HV19042
12v DC
INCLUDED LED Tri-Colour 5w MR16 LED See page 275 for compatible drivers
Tri-Colour 5w GU10 LED INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for compatible drivers
OPTIONAL ACCESSORIES
87
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights Ollo
Cutout with Canister Ø87
• Recessed wall/step/inground light • Stainless Steel, Solid Copper Or Black Face With
Cutout without Canister Ø63
125
Marine Grade 316 Stainless Steel Body
• • • • • •
Tempered glass
Ø67
CANISTER
Ø87 Ø63
Ø92
Trafficable to 500Kg Installation depth needed: 125mm
8
IP Rating: IP65
13
78
5
IK Rating: IK08 NOTE: Adequate drainage must be allowed
Stainless Steel 316
Stainless Steel 316 Black
Weathered Copper
Solid Copper
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
88
12v DC
24v DC
HV9507
HV9508
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v or 24v LED Globe
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
89
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19062T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19072T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19082T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19092T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19102T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights Viale 316 Stainless Steel • • • • • •
Cutout with Canister Ø87
Cutout without Canister Ø63 95
125
Inground/driveway lights
5
Stainless Steel 316 Marine Grade Trafficable to 500Kg
Ø67
CANISTER
Ø92
Ø87 Ø63
Installation depth needed: 125mm IP Rating: IP65
8
13
78
17
NOTE: Adequate drainage must be allowed
Single Inground HV19062T
Four-way Inground HV19092T
Double Inground HV19072T
Triple Inground HV19082T
Inground with grill HV19102T Cutout with Canister Ø87
Cutout without Canister Ø63 83
125
Ø67
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
CANISTER
Ø87 Ø63
8
Ø92
13
www.havit.com.au
78
5
90
Flame 316 Stainless Steel • • • • • • • •
Cut out ~ 30mm 35
DIY mini deck light Stainless Steel 316 Frosted tempered glass RGB multi-function (HV2826RGB Only) 2x 1.5 metre cable length per light IP Rating: light fittings IP67 / driver IP66 Suitable for in-ground installation Kit includes: 6 x single deck light (0.5w per light) 1x LED driver 1x 4m extension cable 1x RF RGB remote controller (HV2826RGB Only) IMAGE
IMAGE
28
30
IP67
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
HV2826C (6 light kit)
5500K
6x 50lm
HV2826W (6 light kit)
3000K
6x 40lm
HV2826RGB (6 light kit)
Multi Colour
PART NUMBER
COLOUR TEMP
LUMENS
HV28261C
5500K
50lm
HV28261W
3000K
HV28261RGB
Multi Colour
HV2826-D-12W
NA
HV9721
RGB
INPUT
INCLUDED LED
Driver: 240v LED
Built-in 6 x 0.5w with Driver
Fittings: 12v DC 6 x 0.5w with Driver and RF Controller INPUT
INCLUDED LED
40lm
12v DC
Built-in 0.5w
NA
240v
NA
12v DC
Remote and Receiver
OPTIONAL ACCESSORIES HV2826-2M-EXT HV2826RGB-2M-EXT HV2826-4M-EXT HV2826RGB-4M-EXT
Optional 2 metre extension cable to extend length between fittings. Sold separately Optional 4 metre extension cable to extend length between fittings. Sold separately
Max 4 additional fittings (HV28261) can be added to the kit(HV2826). Total 10 fittings with supplied driver. Larger kits can be configured using alternate Havit LED drivers.
91
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Deck Lights
LED Driver
End Cap DC12V
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
92
Uton • • • • • • •
Cut out ~ 30mm 40
DIY mini deck light Polycarbonate construction 2x 1.5 metre cable length per light RGB multi-function (HV2827RGB Only) IP Rating: light fittings IP67 / driver IP66 Suitable for in-ground installation Kit includes: 6 x single deck light (0.5w per light) 1x LED driver 1x 4m extension cable 1x RF RGB remote controller (HV2827RGB Only) IMAGE
IMAGE
31.5
27
IP67
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
HV2827C (6 light kit)
5500K
6x 50lm
HV2827W (6 light kit)
3000K
6x 40lm
HV2827RGB (6 light kit)
Multi Colour
PART NUMBER
COLOUR TEMP
LUMENS
HV28271C
5500K
50lm
HV28271W
3000K
HV28271RGB
Multi Colour
HV2826-D-12W
NA
HV9721
RGB
INPUT Driver: 240v LED Fittings: 12v DC
INCLUDED LED
Built-in 6 x 0.5w with Driver
INPUT
INCLUDED LED
40lm
12v DC
Built-in 0.5w
NA
240v
NA
12v DC
Remote and Receiver
OPTIONAL ACCESSORIES HV2826-2M-EXT HV2826RGB-2M-EXT HV2826-4M-EXT HV2826RGB-4M-EXT
Optional 2 metre extension cable to extend length between fittings. Sold separately Optional 4 metre extension cable to extend length between fittings. Sold separately
Max 4 additional fittings (HV28271) can be added to the kit(HV2827). Total 10 fittings with supplied driver. Larger kits can be configured using alternate Havit LED drivers.
93
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Deck Lights
LED Driver
End Cap DC12V
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
94
Tekk 316 Stainless Steel • • • • • • • • • •
Cut out ~ 50mm Ø64
Deck light Stainless Steel 316 face Foot trafficable
75
93
High powered LED chip Face Diameter: 64mm
18
1.5 metre cable length
Ø41
Beam Angle: 30˚ IP Rating: IP67 NOTE: Adequate drainage must be allowed Not suitable for in-ground installation
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
95
PART NUMBER
COLOUR TEMP
LUMENS
HV2860C
5500K
180lm
HV2860N
4000K
170lm
HV2860W
3000K
160lm
INPUT
12v DC
INCLUDED LED
Built-in 3w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Deck Lights
Kett 316 Stainless Steel • • • • • •
Cutout: Ø17mm Ø22
Mini deck light 316 Stainless Steel Face Diameter: 22mm 1.5 metre cable length 56
IP Rating: IP65 NOTE: Adequate drainage must be allowed
Ø16
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2861C
5500K
35lm
HV2861W
3000K
30lm
HV2861B
Blue
NA
INPUT
12v DC
INCLUDED LED
Built-in 0.5w See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
96
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2871C-SLV
5500K
190lm
HV2871W-SLV
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2871C-BLK
5500K
190lm
HV2871W-BLK
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2872C-SLV
5500K
2x 190lm
INPUT
IMAGE
3000K
2x 180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2872C-BLK
5500K
2x 190lm
See page 275 for compatible drivers
INPUT
INCLUDED LED
97
3000K
Built-in 3w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
INPUT
12v DC HV2872W-BLK
Built-in 3w
12v DC
12v DC HV2872W-SLV
INCLUDED LED
Built-in 2x 3w See page 275 for compatible drivers
INCLUDED LED
Built-in 2x 3w See page 275 for compatible drivers
2x 180lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Deck Lights
Dome Aluminium • • • • •
One-way & two-way recessed deck lights
IP65
INDOOR/OUTDOOR WEATHERPROOF
Silver Coloured & Poly Powder Coated Black Aluminium Foot Trafficable IP Rating: IP65 NOTE: Adequate drainage must be allowed
Ø80
49
Cutout: Ø26mm
Ø80
49
Cutout: Ø26mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
98
IMAGE
IMAGE
IMAGE
IMAGE
99
PART NUMBER
COLOUR TEMP
LUMENS
HV2881C-SLV
5500K
270lm
HV2881N-SLV
4000K
250lm
HV2881W-SLV
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2881C-BLK
5500K
270lm
HV2881N-BLK
4000K
250lm
HV2881W-BLK
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2882C-SLV
5500K
450lm
HV2882N-SLV
4000K
420lm
HV2882W-SLV
3000K
400lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2882C-BLK
5500K
450lm
HV2882N-BLK
4000K
420lm
HV2882W-BLK
3000K
400lm
INPUT
INCLUDED LED
Built-in 3w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
Built-in 3w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
Built-in 5w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
12v DC
Built-in 5w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Deck Lights
Elite Aluminium • • • •
Inground / deck light
IP65
INDOOR/OUTDOOR WEATHERPROOF
Silver Coloured & Poly Powder Coated Black Aluminium IP Rating: IP65 NOTE: Adequate drainage must be allowed
Cutout without Canister Ø38
Cutout with Canister Ø46
Ø52
Ø46
55 80
35
Cutout without Canister Ø51
Ø62
Cutout with Canister Ø55
Ø55
61
80
43
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
100
Stainless Steel 316
Solid Copper
Stainless Steel 316 Black
Weathered Copper 4
50
Mini Ollo
13
• Mini recessed step light with eyelid • Stainless Steel, Solid Copper Or Black Face With Marine
Ø53
• • • • •
Cutout without Canister
Ø46
Cutout with Canister
63
15
Grade 316 Stainless Steel Body
Ø33
Flush tempered glass Face diameter: 53mm Installation depth: 90mm
CANISTER
IP Rating: IP67 Not suitable for inground installation
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2891C-SS316
5500K
90lm
HV2891W-SS316
3000K
80lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2891C-CP
5500K
90lm
HV2891W-CP
3000K
80lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2891C-BLK
5500K
90lm
INPUT
101
3000K
80lm
INCLUDED LED Built-in 1w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED Built-in 1w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
12v DC HV2891W-BLK
IP67
INDOOR/OUTDOOR WEATHERPROOF
90
Built-in 1w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Inground & Step Lights
Stainless Steel 316
Solid Copper
Stainless Steel 316 Black
Weathered Copper
Cutout without Canister Ø33
Cutout with Canister Ø46
Ø53
CANISTER
90
4
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
Marine Grade 316 Stainless Steel Body
• • • • • •
Ø33
IMAGE
• Mini recessed inground/step light • Stainless Steel, Solid Copper Or Black Face With
50
63
13
IMAGE
Mini Ollo
Flush tempered glass Face diameter: 53mm Installation depth: 90mm Foot trafficable IP Rating: IP67 NOTE: Adequate drainage must be allowed
PART NUMBER
COLOUR TEMP
LUMENS
HV2892C-SS316
5500K
90lm
HV2892W-SS316
3000K
80lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2892C-CP
5500K
90lm
HV2892W-CP
3000K
80lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2892C-BLK
5500K
90lm
INPUT
3000K
80lm
Built-in 1w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED Built-in 1w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
12v DC HV2892W-BLK
INCLUDED LED
Built-in 1w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
102
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV2901
NA
NA
240v
No globes supplied
HV2902
NA
NA
12v
No globes supplied
HV2903T
3000K 4000K 5500K
160lm 170lm 180lm
240v
Tri-Colour Built-in 2.3w LED
HV2904T
3000K 4000K 5500K
160lm 170lm 180lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV2901-AB
NA
NA
240v
No globes supplied
HV2902-AB
NA
NA
12v
No globes supplied
HV2903T-AB
3000K 4000K 5500K
160lm 170lm 180lm
240v
Tri-Colour Built-in 2.3w LED
HV2904T-AB
3000K 4000K 5500K
160lm 170lm 180lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV2905T-12V
3000K 4000K 5500K
160lm 170lm 180lm
12v DC
INCLUDED LED
Tri-Colour Built-in 2.3w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 2.3w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 2.3w LED See page 275 for compatible drivers
OPTIONAL GLOBES Optional G9 LED globe HV9511W to suit HV2901
103
Optional G4 LED globe HV9529-3.2w to suit HV2902 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights & Brick Lights
Pinta • Surface mounted louvred & eyelid step light • Full Body Stainless Steel 316 Marine Grade & Solid Brass With Antique Brass Finish
• Tempered glass • IP Rating: IP65
316 Stainless Steel
52
100
30
22
Antique Brass
52
Ø100
Ø100
52
21
21
Ø100 Ø100
316 Stainless Steel
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
104
Pinta • Surface mounted eyelid (step light) • Full body Stainless Steel 316 Marine Grade with Stainless Steel or Copper face
• Extra large eyelid design to maximise light output • Frosted tempered glass • IP Rating: IP54 IMAGE
IP54
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV2906
NA
NA
240v
No globes supplied
HV2907
NA
NA
12v
No globes supplied
HV2908C
5500K
180lm 240v
Built-in 2.3w
HV2908W
3000K
160lm
HV2909C
5500K
180lm 12v DC
IMAGE
Built-in 2.3w See page 275 for compatible drivers
HV2909W
3000K
160lm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV2916
NA
NA
240v
No globes supplied
HV2917
NA
NA
12v
No globes supplied
HV2918C
5500K
180lm 240v
Built-in 2.3w
HV2918W
3000K
160lm
HV2919C
5500K
180lm 12v DC
HV2919W
3000K
Built-in 2.3w See page 275 for compatible drivers
160lm
OPTIONAL GLOBES Optional G9 LED globe HV9511W to suit HV2906 & HV2916
105
Optional G4 LED globe HV9529-3.2w to suit HV2907 & HV2917
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights & Brick Lights
101
38
64
26
Weathered Copper
101
38
64
26
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
106
Pinta Aluminium Black • • • •
Surface mounted eyelid & louvred step light Aluminium Poly Powder Coated Black Tempered glass IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV2921
NA
NA
240v
No globes supplied
HV2922
NA
NA
12v
No globes supplied
HV2923T
3000K 4000K 5500K
160lm 170lm 180lm
240v
Tri-Colour Built-in 2.3w LED
HV2924T
3000K 4000K 5500K
160lm 170lm 180lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV2925T-12V
3000K 4000K 5500K
160lm 170lm 180lm
12v DC
INCLUDED LED
Tri-Colour Built-in 2.3w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 2.3w LED See page 275 for compatible drivers
OPTIONAL GLOBES Optional G9 LED globe HV9511W to suit HV2921
107
Optional G4 LED globe HV9529-3.2w to suit HV2922 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights & Brick Lights
50
98
29
98
98
71
71
21
46
18 30
46
5 18 30
5
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
108
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2960C-TTM-240V
5500K
400lm
HV2960W-TTM-240V
3000K
360lm
HV2960C-TTM-12V
5500K
400lm
HV2960W-TTM-12V
3000K
360lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2960C-BLK-240V
5500K
400lm
HV2960W-BLK-240V
3000K
360lm
HV2960C-BLK-12V
5500K
400lm
HV2960W-BLK-12V
3000K
360lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2961C-TTM-240V
5500K
400lm
HV2961W-TTM-240V
3000K
360lm
HV2961C-TTM-12V
5500K
400lm
HV2961W-TTM-12V
3000K
360lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2961C-BLK-240V
5500K
400lm
HV2961W-BLK-240V
3000K
360lm
HV2961C-BLK-12V
5500K
400lm
INPUT
INCLUDED LED
240v
Built-in 5w
See page 275 for compatible drivers
INPUT
INCLUDED LED
240v
Built-in 5w
109
3000K
360lm
Built-in 5w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
240v
Built-in 5w
Built-in 5w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
240v
Built-in 5w
12v DC HV2961W-BLK-12V
Built-in 5w
12v DC
Built-in 5w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights & Brick Lights Nava Aluminium • Surface mounted open face & eyelid step light • Aluminium Poly Powder Coated Black And Titanium Coloured Aluminium
• Opal Polycarbonate diffuser • IP Rating: IP65
25
Ø73
Ø98
30
Ø98
25
Ø71
Ø98
28
Ø98
35
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
110
Bata Stainless Steel • Brick light with plain face & grill cover • Stainless Steel 316 Marine Grade Cover And Stainless Steel Poly Powder Coated Black Cover
• • • • •
Powder coated die cast aluminium body Cutout with Canister: 238mm x 100mm Installation Depth: 90mm Frosted tempered glass
IP54
IP Rating: IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
HV3003T-SS316
HV3003T-SS316-12V IMAGE
PART NUMBER
COLOUR TEMP
HV3003T-BLK
HV3003T-BLK-12V IMAGE
PART NUMBER
HV3004T-SS316-12V PART NUMBER
3000K 4000K 5500K
COLOUR TEMP
HV3004T-BLK
HV3004T-BLK-12V
111
3000K 4000K 5500K
COLOUR TEMP
HV3004T-SS316
IMAGE
3000K 4000K 5500K
3000K 4000K 5500K
LUMENS
800lm 850lm 900lm
LUMENS
800lm 850lm 900lm
LUMENS
800lm 850lm 900lm
LUMENS
800lm 850lm 900lm
INPUT 240v
12v DC INPUT 240v
12v DC INPUT 240v
12v DC INPUT 240v
12v DC
INCLUDED LED Tri-Colour Built-in 10w LED Tri-Colour Built-in 10w LED See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 10w LED Tri-Colour Built-in 10w LED See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 10w LED Tri-Colour Built-in 10w LED See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 10w LED Tri-Colour Built-in 10w LED See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights & Brick Lights
238 86
CANISTER WIDTH = 100mm
108 238 86
CANISTER WIDTH = 100mm
108
3
252
238 108
78
CANISTER WIDTH = 100mm
233
62 87
86
108 108
3
252
78
238
62 87
CANISTER
233
86
108
3
252
WIDTH = 100mm 78
233
62 87
108 238
CANISTER
86
WIDTH = 100mm
108
3
252
238 108
78
62 87
CANISTER
86
WIDTH = 100mm
233
108 108
252
3 refer to pages 275 - 282 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
78
www.havit.com.au
112
Bata Stainless Steel • Brick light with plain face & grill cover • Stainless Steel 316 Marine Grade Cover And Stainless Steel Poly Powder Coated Black Cover
• • • • •
Powder coated die cast aluminium body Cutout with Canister: 158mm x 56mm Installation Depth: 60mm Frosted tempered glass
IP54
IP Rating: IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
113
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3005T-SS316-12V
3000K 4000K 5500K
480lm 510lm 540lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3005T-BLK-12V
3000K 4000K 5500K
480lm 510lm 540lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3006T-SS316-12V
3000K 4000K 5500K
480lm 510lm 540lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3006T-BLK-12V
3000K 4000K 5500K
480lm 510lm 540lm
12v DC
INCLUDED LED
Tri-Colour Built-in 6w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 6w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 6w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 6w LED See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights & Brick Lights
170 54
70 40 170
158 54
70
CANISTER
40
58
Width = 56mm
158 CANISTER
58
170 54
70 40 170
158 54
70 40
CANISTER
58
Width = 56mm
158 CANISTER
58
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All Width globes supplied = 56mmwith fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
114
Bata Stainless Steel • Brick light with plain face & grill cover • Stainless Steel 316 Marine Grade Cover And Stainless Steel Poly Powder Coated Black Cover
• • • • •
Powder coated die cast aluminium body Cutout with Canister: 105mm x 41mm Installation Depth: 58mm Frosted tempered glass
IP54
IP Rating: IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
115
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3007T-SS316-12V
3000K 4000K 5500K
240lm 255lm 270lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3007T-BLK-12V
3000K 4000K 5500K
240lm 255lm 270lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3008T-SS316-12V
3000K 4000K 5500K
240lm 255lm 270lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3008T-BLK-12V
3000K 4000K 5500K
240lm 255lm 270lm
12v DC
INCLUDED LED
Tri-Colour Built-in 3w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 3w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 3w LED See page 275 for compatible drivers
INCLUDED LED
Tri-Colour Built-in 3w LED See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights & Brick Lights
110 54
45 26
110
105
54
45
CANISTER
26
55
Width = 41mm
105 CANISTER
54
110 54
45 26
110
105
54
45 26
CANISTER
55
Width = 41mm
105 CANISTER
55
Width = 41mm All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
116
Lighting by Havit 117 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
Step Lights 185 35
3 34
165 165
24 Back of the fitting view
Cutout Dimensions = 165x24
Recessed Square Cutout 65x65mm 76
3
37
60
76
Recessed Rectangle
Slot • • • • •
Recessed square & rectangle steplight Aluminium White IP Rating: IP20 Indoor use only
IP20
Supplied with dedicated LED driver
IMAGE
IMAGE
INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
HV3102C
5500K
190lm
HV3102W
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3103C
5500K
190lm
HV3103W
3000K
INPUT
INCLUDED LED
240v
Built-in 2.5w LED
INPUT
INCLUDED LED
240v
Built-in 2.5w LED
180lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
118
316 Stainless Steel
Reces • • • • •
Recessed round step light
Aluminium White
Aluminium Black
Cutout without Canister Ø60
Cutout with Canister Ø76
3 33
Stainless Steel 316 and Aluminium Installation depth: 65mm 40° beam angle CANISTER
IP Rating: IP67
Ø76
Ø80
Ø50
IP67
36
65
IMAGE
IMAGE
IMAGE
119
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
HV3205C-SS316
5500K
190lm
HV3205N-SS316
4000K
185lm
HV3205W-SS316
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3205C-WHT
5500K
190lm
HV3205N-WHT
4000K
185lm
HV3205W-WHT
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3205C-BLK
5500K
190lm
HV3205N-BLK
4000K
185lm
HV3205W-BLK
3000K
180lm
INPUT
INCLUDED LED Built-in 3w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED Built-in 3w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
12v DC
Built-in 3w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
316 Stainless Steel
Aluminium White
Aluminium Black
Mini Reces • • • • •
Recessed round step light
Cutout without Canister Ø43
Cutout with Canister
Ø50
Stainless Steel 316 and Aluminium
25
Installation depth: 40mm
2
40° beam angle CANISTER
IP Rating: IP67
Ø50
IMAGE
IMAGE
IP67
27
35
IMAGE
Ø55
Ø39
PART NUMBER
COLOUR TEMP
LUMENS
HV3206C-SS316
5500K
60lm
HV3206N-SS316
4000K
57lm
HV3206W-SS316
3000K
55lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3206C-WHT
5500K
60lm
HV3206N-WHT
4000K
57lm
HV3206W-WHT
3000K
55lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3206C-BLK
5500K
60lm
HV3206N-BLK
4000K
57lm
HV3206W-BLK
3000K
55lm
INDOOR/OUTDOOR WEATHERPROOF
INPUT
INCLUDED LED Built-in 1w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED Built-in 1w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
12v DC
Built-in 1w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
120
Aluminium White
316 Stainless Steel
Cutout without Canister Ø60
Cutout with Canister Ø76
Reces • • • • •
Aluminium Black
Recessed square step light
3
65
33
Stainless Steel 316 and Aluminium Installation depth: 65mm 40° beam angle
CANISTER
IP Rating: IP67
Ø76
80x80
Ø50
IP67
INDOOR/OUTDOOR WEATHERPROOF
36
IMAGE
IMAGE
IMAGE
121
PART NUMBER
COLOUR TEMP
LUMENS
HV3215C-SS316
5500K
190lm
HV3215N-SS316
4000K
185lm
HV3215W-SS316
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3215C-WHT
5500K
190lm
HV3215N-WHT
4000K
185lm
HV3215W-WHT
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3215C-BLK
5500K
190lm
HV3215N-BLK
4000K
185lm
HV3215W-BLK
3000K
180lm
INPUT
INCLUDED LED Built-in 3w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED Built-in 3w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
12v DC
Built-in 3w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
316 Stainless Steel
Aluminium White
Mini Reces • • • • •
Cutout without Canister
Cutout with Canister
Ø43 25 2
Ø50
Recessed square step light
Aluminium Black
35
Stainless Steel 316 and Aluminium Installation depth: 40mm 40° beam angle
CANISTER
55x55
Ø50 Ø39
IP Rating: IP67 27
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV3216C-SS316
5500K
60lm
HV3216N-SS316
4000K
57lm
HV3216W-SS316
3000K
55lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3216C-WHT
5500K
60lm
HV3216N-WHT
4000K
57lm
HV3216W-WHT
3000K
55lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3216C-BLK
5500K
60lm
HV3216N-BLK
4000K
57lm
HV3216W-BLK
3000K
55lm
INPUT
INCLUDED LED Built-in 1w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED Built-in 1w
12v DC
See page 275 for compatible drivers
INPUT
INCLUDED LED
12v DC
Built-in 1w
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
122
Seefore Black • Surface mounted step light • Polycarbonate Black • IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
123
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3221T-BLK
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
HV3222T-BLK
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3223T-BLK
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
See page 275 for
compatible drivers
See page 275 for
compatible drivers
See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
135
32
120
32
120
32
90
150
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
124
Seefore White • Surface mounted step light • Polycarbonate White • IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
125
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3221T-WHT
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
HV3222T-WHT
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3223T-WHT
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
See page 275 for
compatible drivers
See page 275 for
compatible drivers
See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
135
32
120
32
120
32
90
150
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
126
Seevive
220
32
• Rectangle surface mounted step light • Polycarbonate Black or White with Opal diffuser 113
• IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
127
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3225T-BLK
3000K 4000K 5500K
150lm 155lm 160lm
12v DC
Tri-Colour Built-in 5w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
3000K 4000K 5500K
150lm 155lm 160lm
12v DC
Tri-Colour Built-in 5w SMD LED
HV3225T-WHT
See page 275 for
compatible drivers
See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
HV3263W
HV3264W
Cutout Ø30
Cutout Ø30
Ø42
Ø50
46
46
Sako 316 Stainless Steel • • • • • •
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
Recessed mini step lights 316 Stainless Steel 30° beam angle Cut out: 30mm Installation depth: 40mm IP Rating: IP67
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3263W
3000K
100lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3264W
3000K
2x 70lm
12v DC
INCLUDED LED
Built-in 1.5w COB See page 275 for
compatible drivers
INCLUDED LED
Built-in 2w COB See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
128
Taso Aluminium Black • • • •
Surface mounted step light Aluminium Poly Powder Coated Black Polycarbonate Opal Diffuser IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
129
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3270T-BLK-12V
3000K 4000K 5500K
180lm 190lm 200lm
12v DC
Tri-Colour Built-in 3.5w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
3000K 4000K 5500K
350lm 360lm 370lm
12v DC
Tri-Colour Built-in 6w SMD LED
HV3271T-BLK-12V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3272T-BLK-12V
3000K 4000K 5500K
600lm 625lm 650lm
See page 275 for
compatible drivers
See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour Built-in 10w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
HV3270-BLK
57
30 30
130
HV3271-BLK
63
35 170
35
HV3272-BLK
81 46 240
46
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
130
Taso Aluminium White • • • •
Surface mounted step light Aluminium Poly Powder Coated White Polycarbonate Opal Diffuser IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
131
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3270T-WHT-12V
3000K 4000K 5500K
180lm 190lm 200lm
12v DC
Tri-Colour Built-in 3.5w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
3000K 4000K 5500K
350lm 360lm 370lm
12v DC
Tri-Colour Built-in 6w SMD LED
HV3271T-WHT-12V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3272T-WHT-12V
3000K 4000K 5500K
600lm 625lm 650lm
See page 275 for
compatible drivers
See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour Built-in 10w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
HV3270-WHT
57
30 30
130
HV3271-WHT
63
35 170
35
HV3272-WHT
81 46 240
46
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
132
Taso Aluminium Silver • • • •
Surface mounted step light Aluminium Poly Powder Coated Silver Polycarbonate Opal Diffuser IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
133
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3270T-SLV-12V
3000K 4000K 5500K
180lm 190lm 200lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3271T-SLV-12V
3000K 4000K 5500K
350lm 360lm 370lm
12v DC
Tri-Colour Built-in 6w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3272T-SLV-12V
3000K 4000K 5500K
600lm 625lm 650lm
Tri-Colour Built-in 3.5w SMD LED See page 275 for
compatible drivers
See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour Built-in 10w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
HV3270-SLV
57
30 30
130
HV3271-SLV
63
35 170
35
HV3272-SLV
81 46 240
46
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
134
Virsma Aluminium Black • • • •
Surface mounted step light Aluminium Poly Powder Coated Black Polycarbonate Opal Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
135
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3275T-BLK-240V
3000K 4000K 5500K
200lm 210lm 220lm
240v
Tri-Colour Built-in 6w SMD LED
HV3275T-BLK-12V
3000K 4000K 5500K
200lm 210lm 220lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3276T-BLK-240V
3000K 4000K 5500K
110lm 115lm 120lm
240v
Tri-Colour Built-in 4w SMD LED
HV3276T-BLK-12V
3000K 4000K 5500K
110lm 115lm 120lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3277T-BLK-240V
3000K 4000K 5500K
110lm 115lm 120lm
240v
Tri-Colour Built-in 4w SMD LED
HV3277T-BLK-12V
3000K 4000K 5500K
110lm 115lm 120lm
Tri-Colour Built-in 6w SMD LED See page 275 for
compatible drivers
Tri-Colour Built-in 4w SMD LED See page 275 for
compatible drivers
12v DC
Tri-Colour Built-in 4w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
90 200
37
148
148
148
37
37
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
136
Virsma Aluminium White • • • •
Surface mounted step light Aluminium Poly Powder Coated White Polycarbonate Opal Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
137
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3275T-WHT-240V
3000K 4000K 5500K
200lm 210lm 220lm
240v
Tri-Colour Built-in 6w SMD LED
HV3275T-WHT-12V
3000K 4000K 5500K
200lm 210lm 220lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3276T-WHT-240V
3000K 4000K 5500K
110lm 115lm 120lm
240v
Tri-Colour Built-in 4w SMD LED
HV3276T-WHT-12V
3000K 4000K 5500K
110lm 115lm 120lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3277T-WHT-240V
3000K 4000K 5500K
110lm 115lm 120lm
240v
Tri-Colour Built-in 4w SMD LED
HV3277T-WHT-12V
3000K 4000K 5500K
110lm 115lm 120lm
Tri-Colour Built-in 6w SMD LED See page 275 for
compatible drivers
Tri-Colour Built-in 4w SMD LED See page 275 for
compatible drivers
12v DC
Tri-Colour Built-in 4w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
90 200
37
148
148
148
37
37
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
138
Shim Aluminium Black • • • •
Surface mounted LED step light Aluminium Poly Powder Coated Black Polycarbonate Opal Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
139
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3278T-BLK-240V
3000K 4000K 5500K
960lm 1020lm 1080lm
240V
HV3278T-BLK-12V
3000K 4000K 5500K
960lm 1020lm 1080lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3279T-BLK-240V
3000K 4000K 5500K
1120lm 1150lm 1190lm
240V
HV3279T-BLK-12V
3000K 4000K 5500K
1120lm 1150lm 1190lm
INCLUDED LED
Tri-Colour Built-in 12w SMD LED
Tri-Colour Built-in 12w SMD LED See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour Built-in 12w SMD LED
Tri-Colour Built-in 12w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
182 120
63
203
280 120
301
65
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
140
Shim Aluminium White • • • •
Surface mounted LED step light Aluminium Poly Powder Coated White Polycarbonate Opal Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
141
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3278T-WHT-240V
3000K 4000K 5500K
960lm 1020lm 1080lm
240V
HV3278T-WHT-12V
3000K 4000K 5500K
960lm 1020lm 1080lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3279T-WHT-240V
3000K 4000K 5500K
1120lm 1150lm 1190lm
240V
HV3279T-WHT-12V
3000K 4000K 5500K
1120lm 1150lm 1190lm
INCLUDED LED
Tri-Colour Built-in 12w SMD LED
Tri-Colour Built-in 12w SMD LED See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour Built-in 12w SMD LED
Tri-Colour Built-in 12w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
182 120
63
203
280 120
301
65
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
142
Occhio IP65
• Surface mounted LED eyelid step light • 316 Stainless Steel, Solid Brass & Antique Brass • IP Rating: IP65 IMAGE
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
HV3281C-SS316
5500K
255lm
INPUT
12v DC
IMAGE
HV3281W-SS316
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3281C-BR
5500K
255lm
INPUT
12v DC
IMAGE
HV3281W-BR
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3281C-AB
5500K
255lm
INPUT
12v DC
HV3281W-AB
143
3000K
INCLUDED LED
Built-in 3w COB See page 275 for
compatible drivers
INCLUDED LED
Built-in 3w COB See page 275 for
compatible drivers
INCLUDED LED
Built-in 3w COB See page 275 for
compatible drivers
240lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
316 Stainless Steel
Solid Brass
28 56 Antique Brass
47
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
144
Ridge • Surface mounted LED step light • 316 Stainless Steel, Solid Bronze, Aluminium Black and White
• IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
145
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-SS316
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-BRZ
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-BLK
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-WHT
3000K 4000K 5500K
460lm 490lm 520lm
INCLUDED LED
Tri-Colour Built-in 6w LED See page 275 for
compatible drivers
INCLUDED LED
Tri-Colour Built-in 6w LED See page 275 for
compatible drivers
INCLUDED LED
Tri-Colour Built-in 6w LED See page 275 for
compatible drivers
12v DC
INCLUDED LED
Tri-Colour Built-in 6w LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
Stainless Steel
Solid Bronze
Aluminium Black
Aluminium White
62
114
63
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
146
316 Stainless Steel
Solid Bronze
Antique Brass
IP65
INDOOR/OUTDOOR WEATHERPROOF
Stylez
60
• Rectangular LED steplight • 316 Stainless Steel, Solid Brass & Antique Brass • IP Rating: IP65 IMAGE
14
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-SS316
5500K
250lm
80
INPUT
12v DC
IMAGE
HV3288W-SS316
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-BR
5500K
250lm
INPUT
12v DC
IMAGE
HV3288W-BR
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-AB
5500K
250lm
INPUT
12v DC HV3288W-AB
147
3000K
240lm
INCLUDED LED Built-in 3w SMD LED See page 275 for
compatible drivers
INCLUDED LED Built-in 3w SMD LED See page 275 for
compatible drivers
INCLUDED LED Built-in 3w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Step Lights
316 Stainless Steel
Solid Bronze
Antique Brass
IP65
INDOOR/OUTDOOR WEATHERPROOF
120
Stylez • Rectangular up & down LED steplight • 316 Stainless Steel, Solid Brass & Antique Brass • IP Rating: IP65 IMAGE
14
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-SS316
5500K
2x 250lm
INPUT
12v DC
IMAGE
HV3289W-SS316
3000K
2x 240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-BR
5500K
2x 250lm
INPUT
12v DC
IMAGE
HV3289W-BR
3000K
2x 240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-AB
5500K
2x 250lm
INPUT
12v DC HV3289W-AB
3000K
2x 240lm
80
INCLUDED LED Built-in 2x 3w SMD LED See page 275 for
compatible drivers
INCLUDED LED Built-in 2x 3w SMD LED See page 275 for
compatible drivers
INCLUDED LED Built-in 2x 3w SMD LED See page 275 for
compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
148
240
290
84
Mask 316 Stainless Steel • • • •
Wall mask 316 Stainless Steel Marine Grade Five slot with opal diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
Lighting by Havit
149
www.havit.com.au
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV36042T
3000K 4000K 5500K
520lm 550lm 580lm
240v
Tri-Colour Built-in 10w SMD LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
Wall Lights
53
110
Cara Aluminium • • • •
200
Exterior Up and Down Wall Light Aluminum Poly Powder Coated Black and White
Tri-Colour By Havit
Polycarbonate Opal Diffuser
3000K
IP rating: IP54
4000K
IMAGE
IP54
INDOOR/OUTDOOR WEATHERPROOF
5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV35022T-BLK
3000K 4000K 5500K
2x 250lm 2x 300lm 2x 280lm
240v
Tri-Colour Built in 2x 4.5w LED
HV35022T-WHT
3000K 4000K 5500K
2x 250lm 2x 300lm 2x 280lm
240v
Tri-Colour Built in 2x 4.5w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
150
Ø102
63
210
25
193
Ø110
Mini Stainless Steel
160
• Exterior Wall Light • 316 Stainless Steel and Stainless Steel Black • IP Rating: IP54 IMAGE
IMAGE
151
Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3621T-SS316
3000K 4000K 5500K
700lm 720lm 740lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3621T-BLK
3000K 4000K 5500K
700lm 720lm 740lm
240V
INCLUDED LED
Tri-Colour 9w E27 LED
INCLUDED LED
Tri-Colour 9w E27 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Ø102
63
210
25
193
Ø110
Mini Louvre Stainless Steel
160
• Exterior Wall Light • 316 Stainless Steel and Stainless Steel Black • IP Rating: IP54 IMAGE
IMAGE
Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3622T-SS316
3000K 4000K 5500K
700lm 720lm 740lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3622T-BLK
3000K 4000K 5500K
700lm 720lm 740lm
240V
INCLUDED LED
Tri-Colour 9w E27 LED
INCLUDED LED
Tri-Colour 9w E27 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
152
Taper 316 Stainless Steel • • • •
Wall wedge 316 Stainless Steel Marine Grade Frosted tempered glass IP Rating: IP44
240v
12v DC
HV9506
HV9507
24v DC
HV9508
IMAGE
IMAGE
IMAGE
IMAGE
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v,24v or 240v LED Globe
IP44
INDOOR/OUTDOOR WATER RESISTANT
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3601T-SS316
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3602T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3605T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3608C-SS316
5500K
110lm
HV3608W-SS316
3000K
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
153
Tri-Colour By Havit 3000K
INCLUDED LED
1.5w SMD G4 Bi pin See page 275 for
compatible drivers
90lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
105 250
120
HV3601-SS316
HV3602-SS316/HV3605-SS316
HV3608-SS316 75 160 70
60
85
70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
154
Taper Stainless Steel Black • • • •
Wall wedge Stainless Steel Poly Powder Coated Black Frosted tempered glass IP Rating: IP44
240v
12v DC
HV9506
HV9507
24v DC
HV9508
IMAGE
IMAGE
IMAGE
IMAGE
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v,24v or 240v LED Globe
IP44
INDOOR/OUTDOOR WATER RESISTANT
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3601T-BLK
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3602T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3605T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3608C-BLK
5500K
110lm
HV3608W-BLK
3000K
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
155
Tri-Colour By Havit 3000K
INCLUDED LED
1.5w SMD G4 Bi pin See page 275 for
compatible drivers
90lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
105 250
120
HV3601-BLK
HV3602-BLK/HV3605-BLK
HV3608-BLK 75 160 70
60
85
70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
156
Taper Stainless Steel White • • • •
Wall wedge Stainless Steel Poly Powder Coated White Frosted tempered glass IP Rating: IP44
240v
12v DC
HV9506
HV9507
24v DC
HV9508
IMAGE
IMAGE
IMAGE
IMAGE
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v,24v or 240v LED Globe
IP44
INDOOR/OUTDOOR WATER RESISTANT
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3601T-WHT
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3602T-WHT
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3605T-WHT
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3608C-WHT
5500K
110lm
HV3608W-WHT
3000K
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
157
Tri-Colour By Havit 3000K
INCLUDED LED
1.5w SMD G4 Bi pin See page 275 for
compatible drivers
90lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
105 250
120
HV3601-WHT
HV3602-WHT/HV3605-WHT
HV3608-WHT 75 160 70
60
85
70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
158
Taper Copper • • • • •
Wall wedge Copper body Frosted tempered glass Fast weathering for classic aged appearance IP Rating: IP44
Weathered Copper 240v
12v DC
HV9506
HV9507
24v DC
HV9508
IMAGE
IMAGE
IMAGE
IMAGE
Compatible with Tri-Colour 9in1 3w, 5w, 7w 12v,24v or 240v LED Globe
IP44
INDOOR/OUTDOOR WATER RESISTANT
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3601T-CP
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3602T-CP
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3605T-CP
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3608C-CP
5500K
110lm
HV3608W-CP
3000K
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 5w MR16 LED See page 275 for
compatible drivers
12v DC
159
Tri-Colour By Havit 3000K
INCLUDED LED
1.5w SMD G4 Bi pin See page 275 for
compatible drivers
90lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
105 250
120
HV3601-CP
HV3602-CP/HV3605-CP
HV3608-CP 75 160 70
60
85
70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
160
Fixed Down Ø113
151
103
53
38
82
125
Ø113
Up & Down
Porter Aluminium White
• • • • •
Large round wall pillar light
Ø113
Aluminium Poly Powder Coated White Tempered glass
151
38
Triac Dimmable IP Rating: IP54 Tri-Colour By Havit
3000K 4000K
103
IP54
53
82
210
Ø113
INDOOR/OUTDOOR WEATHERPROOF
5500K
IMAGE
IMAGE
161
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3628T-WHT
3000K 4000K 5500K
1200lm 1275lm 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3629T-WHT
3000K 4000K 5500K
2x 1200lm 2x 1275lm 2x 1350lm
240V
INCLUDED LED
Tri-Colour Built-in 15w
INCLUDED LED
Tri-Colour Built-in 2x 15w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Fixed Down Ø113
151
103
53
38
82
125
Ø113
Up & Down
Porter Aluminium Black
• • • • •
Large round wall pillar light
Ø113
Aluminium Poly Powder Coated Black 151
Tempered glass
38
Triac Dimmable IP Rating: IP54 Tri-Colour By Havit
3000K
103
IP54
82
210
Ø113
INDOOR/OUTDOOR WEATHERPROOF
4000K
53
5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3628T-BLK
3000K 4000K 5500K
1200lm 1275lm 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3629T-BLK
3000K 4000K 5500K
2x 1200lm 2x 1275lm 2x 1350lm
240V
INCLUDED LED
Tri-Colour Built-in 15w
INCLUDED LED
Tri-Colour Built-in 2x 15w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
162
Fixed Down
83
120
120 56 39 120
Up & Down
159
Porter Aluminium White • • • • •
Large square wall pillar light Aluminium Poly Powder Coated White Tempered glass
83
Triac Dimmable IP Rating: IP54 Tri-Colour By Havit
3000K 4000K
210
39
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
163
159
120
5500K
IMAGE
120
56
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3628T-WHT-SQ
3000K 4000K 5500K
1200lm 1275lm 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3629T-WHT-SQ
3000K 4000K 5500K
2x 1200lm 2x 1275lm 2x 1350lm
240V
INCLUDED LED
Tri-Colour Built-in 15w
INCLUDED LED
Tri-Colour Built-in 2x 15w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Fixed Down
83
120
120 56 39
Up & Down
159
120
Porter Aluminium Black
• • • • •
Large square wall pillar light Aluminium Poly Powder Coated Black Tempered glass
83
Triac Dimmable IP Rating: IP54 Tri-Colour By Havit
3000K
210
39
IP54
INDOOR/OUTDOOR WEATHERPROOF
4000K
IMAGE
159
120
5500K
IMAGE
120
56
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3628T-BLK -SQ
3000K 4000K 5500K
1200lm 1275lm 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3629T-BLK-SQ
3000K 4000K 5500K
2x 1200lm 2x 1275lm 2x 1350lm
240V
INCLUDED LED
Tri-Colour Built-in 15w
INCLUDED LED
Tri-Colour Built-in 2x 15w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
164
Single Adjustable
Accord Aluminium White • • • •
Square wall lights Aluminium Poly Powder Coated White
100
65
Tempered glass IP Rating: IP54
90
Adjustable
90º Tilt
Tri-Colour By Havit 3000K
IP54
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
165
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3630T-WHT
3000K 4000K 5500K
270lm 285lm 300lm
240v
INCLUDED LED
Tri-Colour 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Fixed Down 81
68
92 81
81
Up & Down 68 150
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
Tri-Colour By Havit
81
3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3631T-WHT
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3632T-WHT
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 2x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
166
Single Adjustable
Accord Aluminium Black • • • •
Square wall light Aluminium Poly Powder Coated Black
100
65
Tempered glass IP Rating: IP54
90
Adjustable
90º Tilt
Tri-Colour By Havit 3000K
IP54
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
167
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3630T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
240v
INCLUDED LED
Tri-Colour 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Fixed Down 81
68
92 81
81
Up & Down 68 150
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
Tri-Colour By Havit
81
3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3631T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3632T-BLK
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 2x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
168
316 Stainless Steel
316 Stainless Steel Black
Veldi
316 Stainless Steel White
182
• Square up & down wall pillar light • 316 Stainless Steel and Powder Coated 316 Stainless Steel Black & White
• Tempered glass • IP Rating: IP54
92
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
169
4000K 5500K
63
IMAGE
Tri-Colour By Havit 3000K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3633T-SS316
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3633T-BLK
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3633T-WHT
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 2x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Aluminium Black
Aluminium White
Platz Aluminium • • • •
Square up & down wall pillar light
160
Aluminium Poly Powder Coated Black & White Tempered glass IP Rating: IP54 56 87
IMAGE
IMAGE
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3634T-BLK
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3634T-WHT
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
170
Aluminium Black
Aluminium White 102
Ø90
Savannah Aluminium • • • •
Up & Down wall light
104
180
Aluminium Poly Powder Coated Black and White Tri-Colour By Havit
Tempered glass
3000K
IP Rating: IP54 IMAGE
IMAGE
171
IP54
INDOOR/OUTDOOR WEATHERPROOF
Base Width = 61mm
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3635T-BLK
3000K 4000K 5500K
2x 225lm 2x 230lm 2x 235lm
240v
Tri-Colour Built-in 2x 4.5w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3635T-WHT
3000K 4000K 5500K
2x 225lm 2x 230lm 2x 235lm
240v
Tri-Colour Built-in 2x 4.5w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Aluminium Black
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
Aluminium White
Nikki Aluminium • • • •
Up & Down wall light
91
Aluminium Poly Powder Coated Black and White Tempered glass IP Rating: IP54 IMAGE
IMAGE
76
185
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3637T-BLK
3000K 4000K 5500K
2x 375lm 2x 400lm 2x 425lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3637T-WHT
3000K 4000K 5500K
2x 375lm 2x 400lm 2x 425lm
240v
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 10w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
172
Mini Blokk White
Blokk White 180
90 44
65
44
65 26
45
26
45
71
65
155
61
Blokk Aluminium White • • • •
Up & Down wall light Aluminium Poly Powder Coated White Frosted tempered glass
IP54
IP Rating: IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
173
PART NUMBER
COLOUR TEMP
LUMENS
HV3638C-WHT
5500K
2x 210lm
INPUT
INCLUDED LED
240v
Built-in 2x 3w LED
HV3638W-WHT
3000K
2x 200lm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3639T-WHT
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 320lm
240v
Tri-Colour Built-in 2x 4.5w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Mini Blokk Black
Blokk Black 180
90 44
65
44
65 26
45
26
45
71
65
155
61
Blokk Aluminium Black • • • •
Up & Down wall light Aluminium Poly Powder Coated Black Frosted tempered glass
IP54
IP Rating: IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV3638C-BLK
5500K
2x 210lm
INPUT
INCLUDED LED
240v
Built-in 2x 3w LED
HV3638W-BLK
3000K
2x 200lm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3639T-BLK
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 320lm
240v
Tri-Colour Built-in 2x 4.5w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
174
Lisse Aluminium White • • • •
Slim wall light
IP54
Aluminium Poly Powder Coated White Tempered glass
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3641T-WHT-240V
3000K 4000K 5500K
240lm 250lm 260lm
240v
HV3641T-WHT-12V
3000K 4000K 5500K
240lm 250lm 260lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3642T-WHT-240V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
240v
HV3642T-WHT-12V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3643T-WHT-240V
3000K 4000K 5500K
360lm 375lm 390lm
240v
HV3643T-WHT-12V
3000K 4000K 5500K
360lm 375lm 390lm
12v DC
HV3643RGBW-WHT
RGB + 3000K
N/A
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3644T-WHT-240V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
240v
HV3644T-WHT-12V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
12v DC
RGB + 3000K
N/A
12v DC
HV3644RGBW-WHT
175
4000K 5500K
IP Rating: IP54 IMAGE
Tri-Colour By Havit 3000K
INCLUDED LED Tri-Colour Built-in 4w LED Tri-Colour Built-in 4w LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 2x 3w LED Tri-Colour Built-in 2x 3w LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 6w LED Tri-Colour Built-in 6w LED
See page 275 for compatible drivers
Built-in 6w LED
See page 275 for compatible drivers Must be used with RGBW Controller
INCLUDED LED Tri-Colour Built-in 2x 5w LED Tri-Colour Built-in 2x 5w LED
See page 275 for compatible drivers
Built-in 2x5w LED
See page 275 for compatible drivers Must be used with RGBW Controller
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Fixed Down HV3641T-WHT 115
Fixed Down HV3643T-WHT 175
76
76
28
28
Up & Down HV3642T-WHT
Up & Down HV3644T-WHT 175
115
90
28
90
28
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
176
Lisse Aluminium Black • • • •
Slim wall light Aluminium Poly Powder Coated Black
IP54
Tempered glass
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54 IMAGE
IMAGE
IMAGE
IMAGE
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3641T-BLK-240V
3000K 4000K 5500K
240lm 250lm 260lm
240v
HV3641T-BLK-12V
3000K 4000K 5500K
240lm 250lm 260lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3642T-BLK-240V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
240v
HV3642T-BLK-12V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3643T-BLK-240V
3000K 4000K 5500K
360lm 375lm 390lm
240v
HV3643T-BLK-12V
3000K 4000K 5500K
360lm 375lm 390lm
12v DC
HV3643RGBW-BLK
RGB + 3000K
N/A
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3644T-BLK-240V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
240v
HV3644T-BLK-12V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
12v DC
RGB + 3000K
N/A
12v DC
HV3644RGBW-BLK
177
Tri-Colour By Havit 3000K
INCLUDED LED Tri-Colour Built-in 4w LED Tri-Colour Built-in 4w LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 2x 3w LED Tri-Colour Built-in 2x 3w LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 6w LED Tri-Colour Built-in 6w LED
See page 275 for compatible drivers
Built-in 6w LED
See page 275 for compatible drivers Must be used with RGBW Controller
INCLUDED LED Tri-Colour Built-in 2x 5w LED Tri-Colour Built-in 2x 5w LED
See page 275 for compatible drivers
Built-in 2x5w LED
See page 275 for compatible drivers Must be used with RGBW Controller
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Fixed Down HV3641T-BLK
Fixed Down HV3643T-BLK
115
175
76
76
28
28
Up & Down HV3642T-BLK
Up & Down HV3644T-BLK 175
115
90
28
90
28
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
178
Essil Aluminium White • • • •
Slim wall light Aluminium Poly Powder Coated White Tempered glass IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
179
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3645T-WHT-240V
3000K 4000K 5500K
240lm 250lm 260lm
240v
HV3645T-WHT-12V
3000K 4000K 5500K
240lm 250lm 260lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3646T-WHT-240V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
240v
HV3646T-WHT-12V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3647T-WHT-240V
3000K 4000K 5500K
360lm 375lm 390lm
240v
HV3647T-WHT-12V
3000K 4000K 5500K
360lm 375lm 390lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3648T-WHT-240V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
240v
HV3648T-WHT-12V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
12v DC
INCLUDED LED Tri-Colour Built-in 4w LEDw Tri-Colour Built-in 4w LEDw
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 2x 3w LED Tri-Colour Built-in 2x 3w LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 6w LED Tri-Colour Built-in 6w LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 2x 5w LED Tri-Colour Built-in 2x 5w LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Fixed Down HV3645T-WHT 115
Fixed Down HV3647T-WHT 175 76
76
28
28
Up & Down HV3646T-WHT
Up & Down HV3648T-WHT 175
115
90
28
90
28
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
180
Essil Aluminium Black • • • •
Slim wall light Aluminium Poly Powder Coated Black Tempered glass IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
181
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3645T-BLK-240V
3000K 4000K 5500K
240lm 250lm 260lm
240v
HV3645T-BLK-12V
3000K 4000K 5500K
240lm 250lm 260lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3646T-BLK-240V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
240v
HV3646T-BLK-12V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3647T-BLK-240V
3000K 4000K 5500K
360lm 375lm 390lm
240v
HV3647T-BLK-12V
3000K 4000K 5500K
360lm 375lm 390lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3648T-BLK-240V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
240v
HV3648T-BLK-12V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
12v DC
INCLUDED LED Tri-Colour Built-in 4w LEDw Tri-Colour Built-in 4w LEDw
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 2x 3w LED Tri-Colour Built-in 2x 3w LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 6w LED Tri-Colour Built-in 6w LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour Built-in 2x 5w LED Tri-Colour Built-in 2x 5w LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Fixed Down HV3645T-BLK 115
Fixed Down HV3647T-BLK 175 76
76
28
28
Up & Down HV3646T-BLK
Up & Down HV3648T-BLK 175
115
90
28
90
28
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
182
95 28
210
Essil Aluminium • • • •
Up & Down LED Wall Light Aluminium Poly Powder Coated Black and White Triac Dimmable (240v Model only)
IP54
IP Rating: IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
183
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3649T-BLK-240V
3000K 4000K 5500K
2x 350lm 2x 360lm 2x 370lm
240v
HV3649T-BLK-12V
3000K 4000K 5500K
2x 350lm 2x 360lm 2x 370lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3649T-WHT-240V
3000K 4000K 5500K
2x 350lm 2x 360lm 2x 370lm
240v
HV3649T-WHT-12V
3000K 4000K 5500K
2x 350lm 2x 360lm 2x 370lm
12v DC
INCLUDED LED Tri-Colour 2x 6w Built in LED Tri-Colour 2x 6w Built in LED
See page 275 for compatible drivers
INCLUDED LED Tri-Colour 2x 6w Built in LED Tri-Colour 2x 6w Built in LED
See page 275 for compatible drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
170
Cono Aluminium
83
• Up & Down wall light • Aluminium Poly Powder Coated Black and White • IP Rating: IP54
IP54
48
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3651T-BLK
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3651T-WHT
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
Lighting by Havit 184
www.havit.com.au
Versa Aluminium • • • •
100
Up & Down LED Wall Light
137
Aluminium Poly Powder Coated Black and White Adjustable beam angle
IP65
120
IP Rating: IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
185
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3658T-BLK-RND
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3658T-WHT-RND
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Versa Aluminium • • • •
100
Up & Down LED Wall Light
100
Aluminium Poly Powder Coated Black and White Adjustable beam angle
IMAGE
INDOOR/OUTDOOR WEATHERPROOF
100
IP Rating: IP65 IMAGE
IP65
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3658T-BLK-SQ
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3658T-WHT-SQ
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
186
180
35
108
88
121
Luxe Aluminium • LED wall light • Aluminium Poly Powder Coated Black and White • IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
187
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3661T-BLK
3000K 4000K 5500K
400lm 425lm 450lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3661T-WHT
3000K 4000K 5500K
400lm 425lm 450lm
240v
INCLUDED LED Tri-Colour Built-in 9w LED INCLUDED LED Tri-Colour Built-in 9w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
190
110
80
Mia Aluminium • LED wall light • Aluminium Poly Powder Coated Black and White • IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3665T-BLK
3000K 4000K 5500K
400lm 425lm 450lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3665T-WHT
3000K 4000K 5500K
400lm 425lm 450lm
240v
INCLUDED LED Tri-Colour Built-in 9w LED INCLUDED LED Tri-Colour Built-in 9w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
188
Pivot
60
• Exterior Wall Light • Aluminium Poly Powder Coated
300°Swivel
White or Black
• Polycarbonate Opal Diffuser • IP Rating: IP54 IMAGE
IMAGE
189
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
Ø140
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3666T-BLK
3000K 4000K 5500K
380lm 460lm 430lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3666T-WHT
3000K 4000K 5500K
380lm 460lm 430lm
240v
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 10w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
300°Swivel
Pivot • Exterior Wall Light • Aluminium Poly Powder Coated
140
140
White or Black
• Polycarbonate Opal Diffuser • IP Rating: IP54 IMAGE
IMAGE
IP54
56
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3667T-BLK
3000K 4000K 5500K
380lm 460lm 430lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3667T-WHT
3000K 4000K 5500K
380lm 460lm 430lm
240v
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 10w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
190
Nepean • Exterior Wall Light • Aluminium Poly Powder Coated White or Black
IP54
• Polycarbonate Opal Diffuser • IP Rating: IP54 IMAGE
IMAGE
191
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3668T-BLK
3000K 4000K 5500K
1180lm 1320lm 1240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3668T-WHT
3000K 4000K 5500K
1180lm 1320lm 1240lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
100
Jasper
250
• Exterior Wall Light • Aluminium Poly Powder Coated White or Black
• Polycarbonate Opal Diffuser • IP Rating: IP54 IMAGE
IMAGE
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
110
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3669T-BLK
3000K 4000K 5500K
1180lm 1320lm 1240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3669T-WHT
3000K 4000K 5500K
1180lm 1320lm 1240lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
192
90 90
Ø300Ø300
90
Ø300
90
Ø300
Stor Aluminium Black • • • •
Bunker wall lights Aluminium Poly Powder Coated Black
IMAGE
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54
IMAGE
193
IP54
Polycarbonate Opal Diffuser
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3670T-BLK
3000K 4000K 5500K
2250lm 2325lm 2400lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3671T-BLK
3000K 4000K 5500K
2050lm 2125lm 2250lm
240v
INCLUDED LED
Tri-Colour Built-in 30w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Ø183
66
Ø183
66
Roto Aluminium Black • • • •
Exterior Wall Light Aluminum Poly Powder Coated Matt Black
IP54
Polycarbonate Opal Diffuser
INDOOR/OUTDOOR WEATHERPROOF
IP rating: IP54
IMAGE
IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36003T-BLK
3000K 4000K 5500K
520lm 600lm 570lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36012T-BLK
3000K 4000K 5500K
360lm 410lm 390lm
240v
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 10w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
194
Liptor Aluminium Black • • • •
Exterior Oyster Light Aluminum Poly Powder Coated Matt Black Polycarbonate Opal Cover IP rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
195
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36051T-BLK
3000K 4000K 5500K
440lm 480lm 450lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36052T-BLK
3000K 4000K 5500K
1130lm 1360lm 1310lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36053T-BLK
3000K 4000K 5500K
1320lm 1600lm 1490lm
240V
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
196
Liptor Aluminium White • • • •
Exterior Oyster Light Aluminum Poly Powder Coated Matt White Polycarbonate Opal Cover IP rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
197
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36051T-WHT
3000K 4000K 5500K
440lm 480lm 450lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36052T-WHT
3000K 4000K 5500K
1130lm 1360lm 1310lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36053T-WHT
3000K 4000K 5500K
1320lm 1600lm 1490lm
240V
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
198
Lighting by Havit 199 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
Wall Lights
50W
30W
39
10W 39
39
130
250
203
98
158
188
Aray Aluminium Black • • • • •
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
LED floodlight Aluminium Poly Powder Coated Black Supplied with flex and plug 180° beam angle IP Rating: IP65
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3726C
4000K
850lm
240v
Built-in 10w SMD
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3728C
4000K
2550lm
240v
Built-in 30w SMD
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3729C
4000K
4250lm
240v
Built-in 50w SMD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
200
Revo Aluminium White • • • •
Single & Double Adjustable wall light Aluminium poly powder coated white Tempered glass IP Rating: IP65
Revo Sensor Aluminium White • • • • • • • •
Double Adjustable wall light Aluminium poly powder coated white 120° Sensor detection Lux and time settings on sensor Up to 10 metre detection range Tempered glass Manual override function IP Rating: IP65 IMAGE
IMAGE
IMAGE
201
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3681T-WHT
3000K 4000K 5500K
810lm 850lm 900lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3683T-WHT
3000K 4000K 5500K
2x 810lm 2x 850lm 2x 900lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3684T-WHT
3000K 4000K 5500K
2x 810lm 2x 850lm 2x 900lm
240v
INCLUDED LED
Tri-Colour Built-in 9w
INCLUDED LED
Tri-Colour Built-in 2x 9w
INCLUDED LED
Tri-Colour Built-in 2x 9w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Single Adjustable HV3681T-WHT
Double Adjustable HV3683T-WHT
Sensor Double Adjustable HV3684T-WHT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
202
Revo Aluminium Black • • • •
Single & Double Adjustable wall light Aluminium poly powder coated black Tempered glass IP Rating: IP65
Revo Sensor Aluminium Black • • • • • • • •
Double Adjustable wall light Aluminium poly powder coated black 120° Sensor detection Lux and time settings on sensor Up to 10 metre detection range Tempered glass Manual override function IP Rating: IP65 IMAGE
IMAGE
IMAGE
203
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3681T-BLK
3000K 4000K 5500K
810lm 850lm 900lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3683T-BLK
3000K 4000K 5500K
2x 810lm 2x 850lm 2x 900lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3684T-BLK
3000K 4000K 5500K
2x 810lm 2x 850lm 2x 900lm
240v
INCLUDED LED
Tri-Colour Built-in 9w
INCLUDED LED
Tri-Colour Built-in 2x 9w
INCLUDED LED
Tri-Colour Built-in 2x 9w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Wall Lights
Single Adjustable HV3681T-BLK
Double Adjustable HV3683T-BLK
Sensor Double Adjustable HV3684T-BLK All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
204
Bar width 50mm
350 25
180 110
90º Tilt / 270º Swivel on all heads
60
2 light bar
3 light bar
Bar width 50mm
550 25
180
Tivah Aluminium Black • • • • •
60
90º Tilt / 270º Swivel on all heads
Adjustable spotlights Aluminium Poly Powder Coated Black 90˚ tilt & 270˚ swivel High output reflector to maximise light IP Rating: IP54
HV9506
Compatible with Tri-Colour 9in1 3w, 5w, 7w LED Globe IMAGE
IMAGE
205
110
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-2-BLK
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-BLK
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Adjustable Bar Lights
4 light bar
Bar width 50mm
750
25
180
110 90º Tilt / 270º Swivel
60
on all heads
250
250
182
4 light square plate
3 light round plate
60
182
188
250
110
110
Ø240 Ø60
90º Tilt / 270º Swivel on all heads
90º Tilt / 270º Swivel on all heads
IMAGE
IMAGE
IMAGE
60 250
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-BLK
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-BLK-RND
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-BLK-SQ
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
INCLUDED LED Tri-Colour 4x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
206
Bar width 50mm
350 25
180 110
90º Tilt / 270º Swivel on all heads
60
2 light bar
3 light bar
Bar width 50mm
550 25
Tivah Aluminium White • • • • •
Adjustable spotlights
60
90º Tilt / 270º Swivel on all heads
Aluminium Poly Powder Coated White 90˚ tilt & 270˚ swivel High output reflector to maximise light IP Rating: IP54
HV9506
Compatible with Tri-Colour 9in1 3w, 5w, 7w LED Globe IMAGE
IMAGE
207
180 110
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-2-WHT
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-WHT
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Adjustable Bar Lights
4 light bar
Bar width 50mm
750
25
180
110 90º Tilt / 270º Swivel
60
on all heads
250
250
182
4 light square plate
3 light round plate
60
182
188
250
110
110
Ø240 Ø60
90º Tilt / 270º Swivel on all heads
90º Tilt / 270º Swivel on all heads
IMAGE
IMAGE
IMAGE
60 250
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-WHT
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-WHT-RND
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-WHT-SQ
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
INCLUDED LED Tri-Colour 4x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
208
Bar width 50mm
350 25
180 110
90º Tilt / 270º Swivel on all heads
60
2 light bar
3 light bar
Bar width 50mm
550 25
Tivah Titanium Aluminum • • • • •
Adjustable spotlights
60
90º Tilt / 270º Swivel on all heads
Titanium Coloured Aluminium 90˚ tilt & 270˚ swivel High output reflector to maximise light IP Rating: IP54
HV9506
Compatible with Tri-Colour 9in1 3w, 5w, 7w LED Globe IMAGE
IMAGE
209
180 110
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-2-TTM
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-TTM
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Adjustable Bar Lights
4 light bar
Bar width 50mm
750
25
180
110 90º Tilt / 270º Swivel
60
on all heads
250
250
182
3 light round plate
4 light square plate 60
182
188
250
110
110
Ø240 Ø60
90º Tilt / 270º Swivel on all heads
90º Tilt / 270º Swivel on all heads
IMAGE
IMAGE
IMAGE
60 250
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-TTM
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-TTM-RND
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-TTM-SQ
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
INCLUDED LED Tri-Colour 4x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
210
70mm Fixed HV5511T-BLK
90mm Tilt HV5512T-BLK
Cut out ~ ø90mm
Cut out ~ Ø70mm
70
70
Ø88mm
Ø88mm
ø105mm
ø105mm
20° Tilt
Prime Aluminium Black • • • • • • • •
Dimmable LED downlights Aluminium Black Aluminium Heat Sink Supplied with dimmable driver complete with flex & plug 60˚ beam angle CRI>90
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54 IMAGE
IMAGE
211
IP54
IC-4 Rated (fitting only)
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5511T-BLK
70mm
3000K 4000K 5500K
980lm 990lm 1000lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5512T-BLK
90mm
3000K 4000K 5500K
980lm 990lm 1000lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Recessed Downlights 76mm Fixed Deep HV5513T-BLK
90mm Fixed Deep HV5514T-BLK
Cut out ~ ø90mm
Cut out ~ ø76mm
95
95 37
37
ø84mm
ø84mm
ø105mm
IP54
INDOOR/OUTDOOR WEATHERPROOF
ø105mm
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5513T-BLK
76mm
3000K 4000K 5500K
980lm 990lm 1000lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5514T-BLK
90mm
3000K 4000K 5500K
980lm 990lm 1000lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
212
70mm Fixed HV5511T-WHT
90mm Tilt HV5512T-WHT
Cut out ~ ø90mm
Cut out ~ Ø70mm
70
70
Ø88mm
Ø88mm
Prime Aluminium White • • • • • • • •
ø105mm
ø105mm
20° Tilt
Dimmable LED downlights Aluminium White Aluminium Heat Sink Supplied with dimmable driver complete with flex & plug 60˚ beam angle CRI>90 IC-4 Rated (fitting only)
IP54
IP Rating: IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
HV5511T-WHT
IMAGE
COLOUR TEMP
LUMENS
INPUT
70mm
3000K 4000K 5500K
980lm 990lm 1000lm
240v
COLOUR TEMP
LUMENS
INPUT
3000K 4000K 5500K
980lm 990lm 1000lm
240v
PART NUMBER
HV5512T-WHT
213
CUT OUT
90mm
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Recessed Downlights 76mm Fixed Deep HV5513T-WHT
90mm Fixed Deep HV5514T-WHT
Cut out ~ ø90mm
Cut out ~ ø76mm
95
95 37
37
ø84mm
ø84mm
ø105mm
IP54
INDOOR/OUTDOOR WEATHERPROOF
ø105mm
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
HV5513T-WHT
IMAGE
CUT OUT
COLOUR TEMP
LUMENS
INPUT
76mm
3000K 4000K 5500K
980lm 990lm 1000lm
240v
COLOUR TEMP
LUMENS
INPUT
3000K 4000K 5500K
980lm 990lm 1000lm
240v
PART NUMBER
HV5514T-WHT
90mm
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
214
Polly LED Downlight
• • • • • • • •
Fixed round LED downlight Polycarbonate matt black or white finish Integrated Triac Dimmable Driver Supplied with flex & plug Cut out: 90mm 120° beam angle IC-4 rated IP Rating: IP54 IMAGE
PART NUMBER
CUT OUT
48
INDOOR/OUTDOOR WEATHERPROOF
Ø110
COLOUR TEMP
IP54
Tri-Colour By Havit 3000K 4000K 5500K
LUMENS
INPUT
INCLUDED LED
Ø110
IMAGE
215
HV5522T-BLK
90mm
3000K 4000K 5500K
635lm 750lm 715lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5522T-WHT
90mm
3000K 4000K 5500K
635lm 750lm 715lm
240v
Tri-Colour Built-in 8w LED
INCLUDED LED
Tri-Colour Built-in 8w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Recessed Downlights
Gleam LED Downlight
• • • • • • • •
70
Fixed round LED downlight Polycarbonate matt black or white finish Aluminium heat sink Dimmable LED driver with flex and plug Cut out: 90mm 90° beam angle IC-4 rated when used with IC-4 Cap
Ø100
OPTIONAL IC4 CAP 60mm
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
4000K 5500K
Ø100mm
IP Rating: IP54
Tri-Colour By Havit 3000K
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5528T-BLK
90mm
3000K 4000K 5500K
680lm 795lm 745lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5528T-WHT
90mm
3000K 4000K 5500K
680lm 795lm 745lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5528D2W-BLK
90mm
1800K-3000K
685lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5528D2W-WHT
90mm
1800K-3000K
685lm
240v
PART NUMBER
DESCRIPTION
HV5528-IC4CAP
To be used with HV5528 Models to provide IC-4 rating
INCLUDED LED Tri-Colour Built-in 9w LED INCLUDED LED Tri-Colour Built-in 9w LED INCLUDED LED Dim to Warm Built-in 9w LED INCLUDED LED Dim to Warm Built-in 9w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
216
Cut out ~ Ø90mm
Ora 316 Stainless Steel • • • • • • • •
54
Fixed round LED downlight Stainless Steel 316 Marine Grade cover Aluminium Heat Sink
Ø106mm
Supplied with dimmable driver complete with flex & plug
ø
Cut out: 90mm 60˚ beam angle IC-4 Rated (fitting only) IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
217
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5530T-SS316
3000K 4000K 5500K
980lm 990lm 1000lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Recessed Downlights
Cut Out = 90mm
90
Ora Aluminium
43
• Fixed round LED downlight • Aluminium Black or White • Supplied with dimmable driver
Ø110
complete with flex & plug
• • • •
Cut out: 90mm 90˚ beam angle
IP54
IC-4 Rated (fitting only)
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54 IMAGE
IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5530T-BLK
3000K 4000K 5500K
980lm 990lm 1000lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5530T-WHT
3000K 4000K 5500K
980lm 990lm 1000lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
218
Cutout Ø38mm 15 41
Niche Aluminium • • • • • • •
Mini square LED downlight
46x46
Aluminium Black or White
3
Aluminium Heat Sink Supplied with LED driver complete with flex and plug Cut out: 38mm
IP54
45˚ beam angle
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54 IMAGE
IMAGE
219
23
PART NUMBER
COLOUR TEMP
LUMENS
HV5701C-BLK
5500K
270lm
HV5701N-BLK
4000K
265lm
HV5701W-BLK
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV5701C-WHT
5500K
270lm
HV5701N-WHT
4000K
265lm
HV5701W-WHT
3000K
240lm
INPUT
240v
INPUT
240v
INCLUDED LED
Built-in 3w LED
INCLUDED LED
Built-in 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Recessed Downlights
Cutout Ø38mm 15 41
Niche Aluminium
23 Ø46
• • • • • • •
3
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
Mini round LED downlight Aluminium Black or White Aluminium Heat Sink Supplied with LED driver complete with flex and plug Cut out: 38mm 45˚ beam angle IP Rating: IP54
PART NUMBER
COLOUR TEMP
LUMENS
HV5702C-BLK
5500K
270lm
HV5702N-BLK
4000K
265lm
HV5702W-BLK
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV5702C-WHT
5500K
270lm
HV5702N-WHT
4000K
265lm
HV5702W-WHT
3000K
240lm
INPUT
240v
INPUT
240v
INCLUDED LED
Built-in 3w LED
INCLUDED LED
Built-in 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
220
Nella Aluminium Black • • • • •
Surface mounted round downlight Aluminium Powder Coated Black Triac Dimmable 120˚ beam angle
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54 IMAGE
IMAGE
IMAGE
221
IP54
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-BLK
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-BLK
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-BLK
3000K 4000K 5500K
1440lm 1540lm 1620lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5803T-BLK
HV5802T-BLK
113
75 65
75
65
103
Ø75
Ø113
157 85
147
Ø157
HV5805T-BLK All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
222
Nella Aluminium Black • • • • •
Surface mounted round downlight with extension Aluminium Powder Coated Black Triac Dimmable 120˚ beam angle
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54 IMAGE
IMAGE
IMAGE
223
IP54
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-BLK-EXT
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-BLK-EXT
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-BLK-EXT
3000K 4000K 5500K
1440lm 1540lm 1620lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
113
140
103
Ø113
HV5802T-BLK-EXT HV5803T-BLK-EXT
75
128
65
157 Ø75
152
147
Ø157
HV5805T-BLK-EXT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
224
Nella Aluminium Black Pendants • • • • • •
Single pendant light Aluminium Powder Coated Black Triac Dimmable 120˚ beam angle Cable length: 1300mm Adjustable IP Rating: IP20
IP20 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
225
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-BLK-P
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-BLK-P
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-BLK-P
3000K 4000K 5500K
1440lm 1540lm 1620lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5802T-BLK-P
HV5803T-BLK-P
HV5805T-BLK-P 70 28
70 28
70 28
103 65
147 145
153
125
Ø75 75
Ø113
113
Ø157
157
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
226
Nella Aluminium White • • • • •
Surface mounted round downlight Aluminium Powder Coated White Triac Dimmable 120˚ beam angle
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54 IMAGE
IMAGE
IMAGE
227
IP54
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-WHT
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-WHT
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-WHT
3000K 4000K 5500K
1440lm 1540lm 1620lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5803T-WHT
HV5802T-WHT
113
75 65
75
65
103
Ø75
Ø113
157 85
147
Ø157
HV5805T-WHT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
228
Nella Aluminium White • • • • •
Surface mounted round downlight with extension Aluminium Powder Coated White Triac Dimmable 120˚ beam angle
INDOOR/OUTDOOR WEATHERPROOF
IP Rating: IP54 IMAGE
IMAGE
IMAGE
229
IP54
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-WHT-EXT
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-WHT-EXT
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-WHT-EXT
3000K 4000K 5500K
1440lm 1540lm 1620lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
113
140
103
Ø113
HV5802T-WHT-EXT HV5803T-WHT-EXT
75
128
65
157 Ø75
152
147
Ø157
HV5805T-WHT-EXT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
230
Nella Aluminium White Pendants • • • • • •
Single pendant light Aluminium Powder Coated White Triac Dimmable 120˚ beam angle Cable length: 1300mm Adjustable IP Rating: IP20
IP20 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
231
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-WHT-P
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-WHT-P
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-WHT-P
3000K 4000K 5500K
1440lm 1540lm 1620lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5802T-WHT-P
HV5803T-WHT-P
HV5805T-WHT-P 70 28
70 28
70 28
103 65
147
145
153
125
Ø75 75
Ø113
113
Ø157
157
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
232
Nella Adjustable Aluminium Black • • • • • •
Surface mounted adjustable round downlight Aluminium Powder Coated Black Triac Dimmable 20º Tilt 60˚ beam angle IP Rating: IP40
IP40 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
233
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5812T-BLK
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5813T-BLK
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5815T-BLK
3000K 4000K 5500K
1440lm 1540lm 1620lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5812T-BLK 75
90
20º Tilt
Ø75
HV5815T-BLK 115
150
Ø115
HV5813T-BLK
20º Tilt
90
120
20º Tilt Ø90 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
234
Nella Adjustable Aluminium White • • • • • •
Surface mounted adjustable round downlight Aluminium Powder Coated White Triac Dimmable 20º Tilt 60˚ beam angle IP Rating: IP40
IP40 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
235
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5812T-WHT
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5813T-WHT
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5815T-WHT
3000K 4000K 5500K
1440lm 1540lm 1620lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5812T-WHT 75
90
20º Tilt
Ø75
HV5815T-WHT 115
150
Ø115
HV5813T-WHT
20º Tilt
90
120
20º Tilt Ø90 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
236
Nella Rotatable Aluminium • • • • • •
Surface mounted rotatable round downlight Aluminium Powder Coated White & Black Triac Dimmable 90º Rotation
IP54
36˚ beam angle IP Rating: IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
237
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5822T-WHT
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5823T-WHT
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5822T-BLK
3000K 4000K 5500K
560lm 595lm 630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5823T-BLK
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants HV5822T-BLK
Ø55
HV5822T-WHT
121 162
Ø55
Ø31
Ø55
HV5823T-BLK
Ø70
HV5823T-WHT
125 170
Ø70
Ø48
Ø70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
238
Nella Rotatable Aluminium • • • • • •
Surface mounted rotatable round downlight Aluminium Powder Coated White & Black Triac Dimmable 90º Rotation
IP54
60˚ beam angle IP Rating: IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
239
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5824T-WHT
3000K 4000K 5500K
1440lm 1530lm 1620lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5825T-WHT
3000K 4000K 5500K
1920lm 2040lm 2160lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5824T-BLK
3000K 4000K 5500K
1440lm 1530lm 1620lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5825T-BLK
3000K 4000K 5500K
1920lm 2040lm 2160lm
240v
INCLUDED LED
Tri-Colour Built-in 18w LED
INCLUDED LED
Tri-Colour Built-in 24w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
INCLUDED LED
Tri-Colour Built-in 24w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants HV5824T-BLK
HV5824T-WHT
Ø90
145 199
Ø90
HV5825T-BLK
HV5825T-WHT
Ø110
175 239
Ø110
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
240
58
58
Ø320
Ø220
Nella Oyster Aluminium White • • • • •
Surface mounted LED oyster Aluminium Powder Coated White Triac Dimmable 120˚ beam angle
IP54
IP Rating: IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
241
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5892T-WHT
3000K 4000K 5500K
1600lm 1700lm 1800lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5893T-WHT
3000K 4000K 5500K
2400lm 2550lm 2700lm
240v
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
58
58
Ø320
Ø220
Nella Oyster Aluminium Black • • • • •
Surface mounted LED oyster Aluminium Powder Coated Black Triac Dimmable 120˚ beam angle
IP54
IP Rating: IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5892T-BLK
3000K 4000K 5500K
1600lm 1700lm 1800lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5893T-BLK
3000K 4000K 5500K
2400lm 2550lm 2700lm
240v
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
242
Proline Custom • • • • • • • •
Single pendant light Available in Black, Silver or White 1800mm, 2400mm or 3000mm lengths Supplied with dimmable LED Driver (remote installed)
28.8
46w per metre 70
120˚ beam angle
57.6 29.3
Cable length: 2000mm Adjustable
41.2
IP20
IP Rating: IP20 60
Custom Made Lengths (From 4-5 days production time + delivery)
INDOOR USE ONLY
PART NUMBER
LENGTH
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV6001C-BLK-1.8
1800mm
5500K
8200lm
240v
Built-in 82w LED
HV6001N-BLK-1.8
1800mm
4000K
7860lm
240v
Built-in 82w LED
HV6001W-BLK-1.8
1800mm
3000K
7450lm
240v
Built-in 82w LED
HV6001C-BLK-2.4
2400mm
5500K
11000lm
240v
Built-in 110w LED
HV6001N-BLK-2.4
2400mm
4000K
10400lm
240v
Built-in 110w LED
HV6001W-BLK-2.4
2400mm
3000K
9900lm
240v
Built-in 110w LED
HV6001C-BLK-3.0
3000mm
5500K
13800lm
240v
Built-in 138w LED
HV6001N-BLK-3.0
3000mm
4000K
13100lm
240v
Built-in 138w LED
HV6001W-BLK-3.0
3000mm
3000K
12400lm
240v
Built-in 138w LED
PART NUMBER
LENGTH
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV6001C-SLV-1.8
1800mm
5500K
8200lm
240v
Built-in 82w LED
HV6001N-SLV-1.8
1800mm
4000K
7860lm
240v
Built-in 82w LED
HV6001W-SLV-1.8
1800mm
3000K
7450lm
240v
Built-in 82w LED
HV6001C-SLV-2.4
2400mm
5500K
11000lm
240v
Built-in 110w LED
HV6001N-SLV-2.4
2400mm
4000K
10400lm
240v
Built-in 110w LED
HV6001W-SLV-2.4
2400mm
3000K
9900lm
240v
Built-in 110w LED
HV6001C-SLV-3.0
3000mm
5500K
13800lm
240v
Built-in 138w LED
HV6001N-SLV-3.0
3000mm
4000K
13100lm
240v
Built-in 138w LED
HV6001W-SLV-3.0
3000mm
3000K
12400lm
240v
Built-in 138w LED
PART NUMBER
LENGTH
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV6001C-WHT-1.8
1800mm
5500K
8200lm
240v
Built-in 82w LED
HV6001N-WHT-1.8
1800mm
4000K
7860lm
240v
Built-in 82w LED
HV6001W-WHT-1.8
1800mm
3000K
7450lm
240v
Built-in 82w LED
HV6001C-WHT-2.4
2400mm
5500K
11000lm
240v
Built-in 110w LED
HV6001N-WHT-2.4
2400mm
4000K
10400lm
240v
Built-in 110w LED
HV6001W-WHT-2.4
2400mm
3000K
9900lm
240v
Built-in 110w LED
HV6001C-WHT-3.0
3000mm
5500K
13800lm
240v
Built-in 138w LED
HV6001N-WHT-3.0
3000mm
4000K
13100lm
240v
Built-in 138w LED
HV6001W-WHT-3.0
3000mm
3000K
12400lm
240v
Built-in 138w LED
243
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Surface Mounted Downlights & Pendants
HV6001T-BLK
HV6001T-SLV
HV6001T-WHT
Proline • • • • • • •
100 25
Single pendant light
IP20
60
Aluminium Black, White or Silver finish
INDOOR USE ONLY
70 1200
Triac Dimmable 120˚ beam angle Cable length: 2000mm Adjustable
Tri-Colour By Havit 3000K
IP Rating: IP20
For custom size lengths please contact sales representative for more information.
4000K
Indoor use only
5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV6001T-BLK
3000K 4000K 5500K
3800lm 3900lm 4000lm
240v
Tri-Colour Built-in 40w LED
HV6001T-SLV
3000K 4000K 5500K
3800lm 3900lm 4000lm
240v
Tri-Colour Built-in 40w LED
HV6001T-WHT
3000K 4000K 5500K
3800lm 3900lm 4000lm
240v
Tri-Colour Built-in 40w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
244
Arc • • • • •
High density extra strong plaster Super bright white Easily painted to match decor
IP20
IP Rating: IP20
INDOOR USE ONLY
Indoor use only
100
120
150
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8025C
5500K
130lm
240v
2w COB G9
HV8025W
3000K
120lm
240v
2w COB G9
245
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Interior Wall Lights Arc • • • • •
High density extra strong plaster Super bright white
IP20
Easily painted to match decor IP Rating: IP20
INDOOR USE ONLY
Indoor use only
120mm
150mm
200mm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8026C
5500K
240lm
240v
3w SMD E14
HV8026W
3000K
220lm
240v
3w SMD E14
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
246
Concept • • • • •
High density extra strong plaster Super bright white Easily painted to match decor IP Rating: IP20
IP20
Indoor use only
INDOOR USE ONLY
100
80
180
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8027C
5500K
130lm
240v
2w COB G9
HV8027W
3000K
120lm
240v
2w COB G9
247
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Interior Wall Lights Concept • Aluminium black with gold insert • IP Rating: IP20 • Indoor use only
IP20 INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8028C-BLK
5500K
130lm
240v
2w G9 LED
HV8028W-BLK
3000K
120lm
240v
2w G9 LED
Concept • Aluminium white with gold insert • IP Rating: IP20 • Indoor use only
IP20 INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8028C-WHT
5500K
130lm
240v
2w COB G9
HV8028W-WHT
3000K
120lm
240v
2w COB G9
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
248
Aurora • • • • •
175
175
100
High density extra strong plaster Super bright white Easily painted to match decor
285
IP20
IP Rating: IP20 Indoor use only
285
INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8030C
5500K
240lm
240v
3w SMD E14
HV8030W
3000K
220lm
240v
3w SMD E14
249
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
100
Interior Wall Lights Sunrise 150 • • • • •
High density extra strong plaster Super bright white Easily painted to match decor IP Rating: IP20 Indoor use only 150
50
IP20
100
INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8069C
5500K
130lm
240v
2w G9 LED
HV8069W
3000K
120lm
240v
2w G9 LED
Sunrise 200 • • • • •
High density extra strong plaster Super bright white Easily painted to match decor IP Rating: IP20 Indoor use only 200
50
IP20
100
INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8070C
5500K
240lm
240v
3w SMD E14
HV8070W
3000K
220lm
240v
3w SMD E14
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
250
Zigbee Wall Switch
55
• • • • •
55
Zigbee LED Dimming Controller Input Voltage: 3v DC Dimming range: 0.1-100% Operation Frequency: 2.4GHZ Compatible with all Zigbee Receivers
11
PART NUMBER
DESCRIPTION
IP RATING
HV9101-ZB-5C
Zigbee LED Dimming Controller
IP20
POWER DC 3v battery (CR2032)
Single Coloured Zigbee LED Touch Panel 44 20
120
83 66 AC POWER INPUT L
L
N
N
75
• • • • • • •
Single Coloured Zigbee LED Touch Panel Compatible with Zigbee Receivers Input Voltage: 240 AC Preset 25% 50% 75% 100% brightness Six Scenes Dimming range: 0.1-100% Operation Frequency: 2.4GHZ
Must be used with HV9105-ZB-DIM PART NUMBER
DESCRIPTION
IP RATING
HV9101-ZB-SCTP
Single Coloured Zigbee LED Touch Panel
IP20
POWER 240v
RGBW Zigbee LED Touch Panel 44 20
120
83 66 AC POWER INPUT L
L
N
N
• • • • •
RGBW Zigbee LED Touch Panel Compatible with Zigbee Receivers Three scenes Input Voltage: 240v AC Operation Frequency: 2.4GHZ
75
Must be used with HV9105-ZB-RGBW PART NUMBER
DESCRIPTION
IP RATING
HV9101-ZB-RGBWTP
RGBW Zigbee LED Touch Panel
IP20
251
POWER 240v
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers Single Coloured Zigbee LED Remote Control • Single Coloured Zigbee LED Remote Controller
• • • •
4 zones + 3 scenes Compatible with Zigbee Receivers Input Voltage: 4.5v DC (3x AAA)
120
Operation Frequency: 2.4GHZ
17
55
PART NUMBER
DESCRIPTION
IP RATING
HV9102-ZB-SCREM
Single Coloured Zigbee LED Remote Controller
IP20
POWER 4.5v DC (3x AAA)
RGBW Zigbee LED Remote Control • • • • •
RGBW Zigbee LED Remote Controller Compatible with Zigbee Receivers Three scenes Input Voltage: 4.5v DC (3x AAA)
120
Operation Frequency: 2.4GHZ
17
55
PART NUMBER
DESCRIPTION
IP RATING
HV9102-ZB-RGBWREM
RGBW Zigbee LED Remote Controller
IP20
POWER 4.5v DC (3x AAA)
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
252
IP20 INDOOR USE ONLY
Single Coloured Zigbee LED Controller • Single Coloured Zigbee LED Controller • Can be controlled with Zigbee Hub or HV9102-ZB-SCTP or HV9102-ZB-SCREM or
28
HV9101-ZB-5C
170 54
• • • •
Input Voltage: 12-24V DC Output Power: 4CH x 5A (240W-480W) Operation frequency 2.4GHZ Dimming range 5-100%
PART NUMBER
DESCRIPTION
IP RATING
HV9105-ZB-DIM
Single Coloured Zigbee LED Controller
IP20
POWER 12-24V DC
IP20 INDOOR USE ONLY
RGBW Zigbee LED Controller 28
• RGBW Zigbee LED Controller • Can be controlled with Zigbee Hub or HV9102-ZB-RGBW or HV9102-ZB-RGBWREM or
170
HV9101-ZB-5C 54
• Input Voltage: 12-24V DC • Output Power: 4CH x 5A (240W-480W) • Operation frequency 2.4GHZ
PART NUMBER
DESCRIPTION
IP RATING
HV9105-ZB-RGBW
RGBW Zigbee LED Controller
IP20
253
POWER 12-24V DC
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers Zigbee Trailing Edge Dimmer Relay • • • • • • • •
Zigbee Trailing edge dimmer Can be controlled using HV9101-ZB-5C Can be used with push dimmer Can be used with Zigbee Hub Input Voltage: 240v AC Output Power: 400W (200w LED) Operation frequency 2.4GHZ Dimming Range - 5-100%
46 45
IP20
21
INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
HV9105-ZB-ACDIM
Zigbee Trailing edge dimmer
IP20
POWER 240v
Zigbee On-Off Switch Relay • • • • • • •
Zigbee on-off switch Can be controlled using HV9101-ZB-5C Can be used with push switch Can be used with Zigbee Hub Input Voltage: 240v AC Output Power: 400W (200w LED) Operation frequency 2.4GHZ
46 45 21
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
HV9105-ZB-ACSW
Zigbee on-off switch
IP20
POWER 240v
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
254
LED Strip Touch Panel Controllers IMAGE
255
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9101-DX1
• • • • • •
Single Colour LED strip touch panel Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Must be used with HV9103-R4-5A Dimming range 5-100%
240v AC
HV9101-DX2
• • • • • • •
Colour Temp (CT) LED strip touch panel Customise the colour temperature Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Must be used with HV9103-R4-5A Dimming range 5-100%
240v AC
HV9101-EX3S
• • • • • •
RGB LED strip touch panel Input voltage: 240v AC Output signal: 2.4GHZ + DMX512 Transmitting range: 30m approx Must be used with HV9103-F4-5A Adjustable speed and brightness
240v AC
HV9101-EX4S
• • • • • •
RGBC & RGBW wireless touch panel Input Voltage: 240v AC Output signal: 2.4GHZ + DMX512 Transmitting range approx. 30m Must be used with HV9103-F4-5A Adjustable speed and brightness
240v AC
HV9103-F4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
HV9103-R4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers
Single Colour HV9101-DX1
Colour Temp (CT) 3000K-5500K HV9101-DX2
Cutout 66mm x 66mm 86mm
86mm
RGB HV9101-EX3S
RGBC & RGBW HV9101-EX4S
Cutout 66mm x 66mm
11mm
86mm 25mm
86mm
47mm
86mm 6mm 19mm
11mm All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
25mm
www.havit.com.au
256
LED Strip Touch Panel Controllers IMAGE
257
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9101-DX5
• • • • • • •
Single Colour LED strip touch panel Control up to 4 separate zones Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Must be used with HV9103-R4-5A Dimming range 5-100%
240v AC
HV9101-DX7
• • • • • • • •
Colour Temp (CT) LED strip touch panel Customise colour temp Control up to 4 separate zones Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Must be used with HV9103-R4-5A Dimming range 5-100%
240v AC
HV9101-DX8
• • • • • • •
RGBC & RGBW wireless touch panel Able to control up to 4 separate zones Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting range approx. 30m Must be used with HV9103-R4-5A Adjustable speed and brightness
240v AC
HV9103-R4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers
Single Colour HV9101-DX5
Colour Temp (CT) 3000K-5500K HV9101-DX7
Cutout 66mm x 66mm 86mm
86mm
RGBC & RGBW HV9101-DX8 Cutout 66mm x 66mm
11mm
86mm 25mm
86mm
47mm
86mm 6mm 19mm
11mm All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 25mm Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
258
LED Strip Dial Controllers IMAGE
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9101-DX61
• • • • •
240v AC
Single Colour LED strip dial dimmer Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Must be used with HV9103-R4-5A
• Colour Temp (CT) LED strip dial dimmer • Customise the colour temperature to HV9101-DX62
• • • •
suit your decor Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Must be used with HV9103-R4-5A
240v AC
• Leading edge Triac dimmer • For use with Havit Triac Dimmable HV9101-E6-TD1
HV9103-R4-5A
259
LED Drivers (HV9660 or HV9661 Models)
• Input Voltage: 240v • Dimming LEDs: 6-300W
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
240v AC
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers
Single Colour HV9101-DX61
Colour Temp (CT) 3000-5500K HV9101-DX62
Cutout 66mm x 66mm 86mm
86mm
Cutout 66mm x 66mm
Single Colour Triac HV9101-E6-TD1 11mm
86mm 25mm
86mm
47mm
40 86 6mm
11mm
19mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 25mm Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
260
LED Strip Touch Panel Controllers IMAGE
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
HV9101-D1
• • • • •
HV9101-E2
• Colour Temp (CT) LED strip touch panel • Input Voltage: 12v DC or 24v DC • Dimming Range 5-100%
HV9101-E3S
• RGB LED strip touch panel controller • Input Voltage: 12v DC or 24v DC • Adjustable speed and brightness
Single Colour LED strip touch panel Easy 30 second till off delay button “Favourite” memory button Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
• RGBC & RGBW LED strip Touch Panel HV9101-E4S
261
controller
• Input Voltage: 12v DC or 24v DC • Adjustable speed and brightness
POWER
12v DC 144w 24v DC 288w
12v DC 96w 24v DC 192w
12v DC 144w 24v DC 288w
12v DC 192w 24v DC 384w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers
Single Colour HV9101-D1
Colour Temp (CT) 3000K-5500K HV9101-E2
Cutout 66mm x 66mm 86mm
86mm
RGB HV9101-E3S
RGBC & RGBW HV9101-E4S
Cutout 66mm x 66mm
11mm
86mm 25mm
86mm
47mm
86mm 6mm 19mm
11mm All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 25mm Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
262
263 www.havit.com.au Lighting by Havit
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
LED Strip Controllers
Cutout 66mm x 66mm 86mm
Single Colour HV9101-D61
Colour Temp (CT) 3000-5500K 86mm HV9101-D62 Cutout 66mm x 66mm 11mm
86mm 25mm
86mm
47mm
40 86 6mm
LED Strip Dial Controllers
IP20
25mm
INDOOR USE ONLY
47mm
IMAGE
19mm
11mm
40 86
PART NUMBER 6mm
DESCRIPTION
POWER
19mm
HV9101-D61
• • • •
Single Colour LED strip Dimming range 5-100% Input Voltage: 12v DC or 24v DC Optional output Signal: 0-1/10v
HV9101-D62
• • • •
Colour Temp (CT) LED strip Dimming Range 5-100% Customise the colour temp Input Voltage: 12v DC or 24v DC
12v DC 72w 24v DC 144w
12v DC 96w 24v DC 192w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
264
LED Strip Remote Controllers IMAGE
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
• Single colour remote controller and • • • • •
receiver 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
HV9102-M2+M4-5A
• • • • • •
CT remote controller and receiver 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
12v DC 240w 24v DC 480w
HV9102-M3+M4-5A
• • • • • •
RGB remote controller and receiver 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC Adjustable speed and brightness
12v DC 240w 24v DC 480w
HV9102-M1+M4-5A
12v DC 240w 24v DC 480w
• RGBC or RGBW remote controller and HV9102-M4+M4-5A
265
• • • • •
receiver 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC Adjustable speed and brightness
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers
Single Colour HV9102-M1+M4-5A
Colour Temp (CT) 3000K-5500K HV9102-M2+M4-5A
RGB HV9102-M3+M4-5A
RGBC & RGBW HV9102-M4+M4-5A 9mm
60mm
44mm
104mm
14mm
63mm
78mm
108mm
30mm 175mm
Receiver
Remote
Remote-holder
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
266
RGB
40
12 17
145 65
• • • • • •
RGB LED strip remote controller Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A Adjustable speed and brightness
89
PART NUMBER
DESCRIPTION
IP RATING
HV9102-V3
RGB LED strip remote controller
IP20
POWER DC 3v battery (CR2032)
RGBC & RGBW
40
12 17
• • • • • •
RGBC & RGBW LED strip remote controller Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A Adjustable speed and brightness
145 65
89
PART NUMBER
DESCRIPTION
IP RATING
HV9102-V4
RGBC/W LED strip remote controller
IP20
POWER DC 3v battery (CR2032)
Single Colour
40
12 17
145 65
89
• • • • • • •
Single Colour LED strip remote controller Control up to 4 separate zones Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A Dimming range 5-100%
PART NUMBER
DESCRIPTION
IP RATING
POWER
HV9102-V5
Single Colour LED strip remote controller
IP20
DC 3v battery (CR2032)
267
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers CT LED • • • • • • •
CT LED strip remote controller Control up to 4 separate zones Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A
40
Dimming range 5-100%
12 17
145 65
89
PART NUMBER
DESCRIPTION
IP RATING
HV9102-V6
CT LED strip remote controller
IP20
POWER DC 3v battery (CR2032)
RGBC & RGBW • • • • • • •
RGBC & RGBW LED strip remote controller Control up to 4 separate zones Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A
40
12
Adjustable speed and brightness
17
145 65
89
PART NUMBER
DESCRIPTION
IP RATING
HV9102-V8
RGBC/W LED strip remote controller
IP20
IMAGE
PART NUMBER
DESCRIPTION
HV9103-R4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
POWER DC 3v battery (CR2032) POWER 12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
268
LED Zone Receiver • • • • •
4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ Dimming Range 5-100%
44
30 8
176
Zone receiving controller
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9103-R4-5A
LED Zone receiving controller
IP20
POWER 12v DC 240w / 24v DC 480w max
Single Channel Repeater • Power Repeater / Amplifier • Enables additional loads of LED strip to be controlled from 1 device
• Single channel • Input Voltage: 12v DC or 24v DC • Dimming Range 5-100% 44
30 8
176
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9104-LT-3010-12A
Single Channel Repeater
IP20
POWER 12v DC 144w / 24v DC 288w max
4 Channel Repeater • Power Repeater / Amplifier • Enables additional loads of LED strip to be controlled from 1 device
• 4 Channel • Input Voltage: 12v DC or 24v DC • Dimming Range 5-100% 44
30 8
176
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9104-LT-3040-5A
LED Power Repeater / Amplifier
IP20
269
POWER 12v DC 240w / 24v DC 480w max
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers Colour Temp (CT) • • • •
CT LED strip Wifi controller Customise the colour temp to your decor Input Voltage: 12v DC or 24v DC Dimming Range 5-100% 33
L-Home App
120 125 33
20 120
PART NUMBER
125
DESCRIPTION
HV9105-WIFI-101-CT
20
Colour Temp (CT) LED strip WiFi controller
IP RATING IP20
POWER 12v DC 144w max / 24v DC 288w max
RGBC & RGBW • • • • •
RGBC/W LED strip Wifi controller Suits Ecolamp RGBC/W LED Strip Input Voltage: 12v DC or 24v DC Ability to Create Custom Colour Sequences Adjustable speed and brightness
33
L-Home App
120 125 33
20 120
PART NUMBER
125
DESCRIPTION
HV9105-WIFI-102-RGBW
20
RGBC & RGBW LED strip WiFi controller
IP RATING IP20
POWER 12v DC 144w max / 24v DC 288w max
WIFI Multi-function • • • • • •
Android 2.2 or above, IOS 5.1 or above 2.4GHz Wi-Fi, 802.11b/g/n protocol 12V DC or 24V DC Max 30m Dimming, CT, RGB, RGBW 127 Dimming Range 5-100%
45
WIFI-104 App
73
PART NUMBER
DESCRIPTION
IP RATING
HV9105-WIFI-104
WIFI Multi-function controller
IP20
POWER 12v DC 192W / 24v DC 384W
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
270
Single Colour • • • •
0-1/10v LED Strip Controller Dimming range: 0-100% Input Signal: 0-1/10v Input Voltage: 12v DC or 24v DC
44
30 8
176
8
160
PART NUMBER
DESCRIPTION
IP RATING
HV9106-LT-701-12A
0-1/10v LED Strip Controller
IP20
POWER 12v DC 144w max / 24v DC 288w max
RGB
16mm
39mm 7mm
107mm
15mm 15mm
40mm
16mm
39mm 107mm
7mm
• 0-1/10v RGB LED Strip Controller • Input Signal: 0-1/10v • Input Voltage: 12v DC or 24v DC
15mm 15mm 107mm
7mm
PART NUMBER
DESCRIPTION 40mm
IP RATING
HV9106-LT-393-5A 107mm
0-1/10v RGB LED Strip Controller 7mm
IP20
POWER 12v DC 180w max / 24v DC 360w max
RGBC & RGBW • 0-1/10v RGBC & RGBW LED Strip Controller • Input Signal: 0-1/10v • Input Voltage: 12v DC or 24v DC
44
30 8
176
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9106-LT-704-5A
0-1/10v RGBC & RGBW LED Strip Controller
IP20
271
POWER 12v DC 240w max / 24v DC 480w max
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers Single Colour • • • • •
Dali LED Strip Controller Dimming range: 0-100% Input Signal: DALI digital dimming signal Input Voltage: 12v DC or 24v DC Output Signal: 0-1/10v 44
30 8
176
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9107-LT-401-12A
Dali LED Strip Controller
IP20
POWER 12v DC 144w max / 24v DC 288w max
RGB • • • •
Dali RGB LED Strip Controller Input Signal: DALI digital dimming signal Input Voltage: 12v DC or 24v DC Output Signal: 0-1/10v
44
30 8
176
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9107-LT-403-6A
Dali RGB LED Strip Controller
IP20
POWER 12v DC 216w max / 24v DC 432w max
RGBC & RGBW • • • •
Dali RGBC/RGBW LED Strip Controller Input Signal: DALI digital dimming signal Input Voltage: 12v DC or 24v DC Output Signal: 0-1/10v
44
30 8
176
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9107-LT-404-5A
Dali RGBC/RGBW LED Strip Controller
IP20
POWER 12v DC 216w max / 24v DC 432w max
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
272
Single Colour • • • • •
DMX LED strip controller For use with Single Colour LED strip Input signal: DMX512 Input voltage: 12v DC or 24v DC Max Load Current: 12A x 1CH + 0-10V X 1CH + 10V PWM X 1CH
44
30 8
176
160
• Dimming Range: 0-100%
8
PART NUMBER
DESCRIPTION
IP RATING
HV9109-LT-811-12A
DMX Controller for Single Coloured LED Strip
IP20
POWER 12v DC 144w max / 24v DC 288w max
RGB • • • • • •
For use with RGB LED strip Input signal: DMX512 Input voltage: 12v DC or 24v DC Max Load Current: 6A X 3 Channel Max 18A Dimming Range: 0-100%
44
30 8
176
DMX LED strip controller
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9109-LT-823-6A
DMX Controller for RGB LED Strip
IP20
POWER 12v DC 216w max / 24v DC 432 max
RGBC & RGBW • • • • • •
For use with RGBC or RGBW LED strip Input signal: DMX512 Input voltage: 12v DC or 24v DC Max Load Current: 5A X 4 Channel Max 20A Dimming Range: 0-100%
44
30 8
176
DMX LED strip controller
160
8
PART NUMBER
DESCRIPTION
IP RATING
HV9109-LT-820-5A
DMX Controller for RGBC or RGBW LED Strip
IP20
273
POWER 12v DC 240w max / 24v DC 480w max
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Controllers LED Dial Dimmer LED Dial Dimmer
22.4mm
• • • •
55mm M
N
M
N'
70mmMin.
Suits specified Havit dimmable products
5mm
3-300w Max
39mm
Input voltage: 240v Cut off
M
N
21.8mm 21.8mm
D17
Unit:mm
mm
M
N'
PART NUMBER
DESCRIPTION
IP RATING
HV9625
LED Dial Dimmer
IP20
POWER 240v 3w min/300w max
1-10v LED Strip Dimming Pot • 1-10v dimming pot for Clipsal or HPM plate • Enables wall plate dimming on a standard Clipsal or
23
HPM plate
32
22
• To be used with HV9661 model drivers or HV9106-LT-701-12A
19
26
23
22
PART NUMBER
DESCRIPTION
IP RATING
HV9628
1-10v dimming pot for standard Clipsal & HPM plate
IP20
POWER NA
4 Channel LED Repeater / Amplifier • Power Repeater / Amplifier • Enables additional loads of LED strip to be controlled from 1 device
• 4 channel • Input voltage: 12v DC or 24v DC • Dimming Range 5-100%
34 147 60.5 r
we
Po
V+
R
Input G B
W
V+
RGBW High Speed Power Amplifier
7
Input/Output voltage: DC 5-24V Total output of current: max 4^8A
V+
W
Output B G
R
V+
Power V+ V-
79.5
PART NUMBER
DESCRIPTION
IP RATING
HV9635
4 Channel LED Repeater / Amplifier
IP20
POWER 12v DC 384w Max / 24v DC 768w Max
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
274
12v DC - IP66 Weatherproof • • • • •
12v DC constant voltage Supplied with flex and plug
IP66
Must be installed with adequate ventilation
INDOOR/OUTDOOR WEATHERPROOF
Suits Havit 12v LED products IP Rating: IP66 IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9650S
240v AC
12v DC 10w
(H)21x (W)29x (L)89
HV9651
240v AC
12v DC 20w
(H)28x (W)30x (L)162
HV9652
240v AC
12v DC 30w
(H)22x (W)40x (L)148
HV9653
240v AC
12v DC 60w
(H)31x (W)41x (L)179
HV9654
240v AC
12v DC 100w
(H)46x (W)72x (L)210
High Power Factor 12v DC - IP66 Weatherproof IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9658-12V30W
240v AC
12v DC 30w
(H)28x (W)37x (L)212
HV9658-12V60W
240v AC
12v DC 60w
(H)46x (W)67x (L)175
HV9658-12V100W
240v AC
12v DC 100w
(H)46x (W)72x (L)215
HV9658-12V150W
240v AC
12v DC 150w
(H)46x (W)68x (L)247
HV9658-12V200W
240v AC
12v DC 200w
(H)46x (W)68x (L)247
HV9658-12V275W
240v AC
12v DC 275w
(H)50x (W)95x (L)275
Slimline 12v DC - IP66 Weatherproof IMAGE
275
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9658-12V60WS
240v AC
12v DC 60w
(H)22x (W)40x (L)253
HV9658-12V95WS
240v AC
12v DC 95w
(H)22x (W)40x (L)298
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Drivers 24v DC - IP66 Weatherproof • • • • •
24v DC constant voltage Supplied with flex and plug
IP66
Must be installed with adequate ventilation
INDOOR/OUTDOOR WEATHERPROOF
Suits Havit 24v LED products IP Rating: IP66 IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9652-24V
240v AC
24v DC 30w
(H)22x (W)40x (L)148
HV9653-24V
240v AC
24v DC 60w
(H)31x (W)41x (L)179
HV9654-24V
240v AC
24v DC 100w
(H)46x (W)72x (L)210
High Power Factor 24v DC - IP66 Weatherproof IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9658-24V30W
240v AC
24v DC 30w
(H)28x (W)37x (L)212
HV9658-24V60W
240v AC
24v DC 60w
(H)46x (W)67x (L)175
HV9658-24V100W
240v AC
24v DC 100w
(H)46x (W)72x (L)215
HV9658-24V150W
240v AC
24v DC 150w
(H)46x (W)68x (L)247
HV9658-24V200W
240v AC
24v DC 200w
(H)46x (W)68x (L)247
HV9658-24V300W
240v AC
24v DC 300w
(H)50x (W)95x (L)275
Slimline 24v DC - IP66 Weatherproof IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9658-24V60WS
240v AC
24v DC 60w
(H)22x (W)40x (L)253
HV9658-24V95WS
240v AC
24v DC 95w
(H)22x (W)40x (L)298
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
276
TRIAC • • • • • •
TRIAC Dimmable LED drivers Constant voltage 12v DC Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v DC single coloured LED strip To be used with HV9625
IP20 INDOOR USE ONLY
IP20 INDOOR IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9660-12V30W
240v AC
12v DC 30w
(H)20x (W)54x (L)155
HV9660-12V60W
240v AC
12v DC 60w
(H)24x (W)61x (L)178
PART NUMBER
IP66
INDOOR/OUTDOOR WEATHERPROOF
IP66 WEATHERPROOF IMAGE
277
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9660-12V100W
240v AC
12v DC 100w
(H)43x (W)70x (L)230
HV9660-12V150W
240v AC
12v DC 150w
(H)47x (W)78x (L)265
HV9660-12V200W
240v AC
12v DC 200w
(H)47x (W)78x (L)265
HV9660-12V300W
240v AC
12v DC 300w
(H)47x (W)78x (L)278
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Drivers TRIAC • • • • • •
TRIAC Dimmable LED drivers Constant voltage 24V DC Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 24v DC single coloured LED strip To be used with HV9625
IP20 INDOOR USE ONLY
IP20 INDOOR IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9660-24V30W
240v AC
24v DC 30w
(H)20x (W)54x (L)155
HV9660-24V60W
240v AC
24v DC 60w
(H)24x (W)61x (L)178
IP66
INDOOR/OUTDOOR WEATHERPROOF
IP66 WEATHERPROOF IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9660-24V100W
240v AC
24v DC 100w
(H)43x (W)70x (L)230
HV9660-24V150W
240v AC
24v DC 150w
(H)47x (W)78x (L)265
HV9660-24V200W
240v AC
24v DC 200w
(H)47x (W)78x (L)265
HV9660-24V300W
240v AC
24v DC 300w
(H)47x (W)78x (L)278
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
278
2in1 Dimmable Drivers
• • • • • • •
TRIAC Dimmable LED drivers Triac +0-1/10V Dimming Constant voltage 12v or 24v DC Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v or 24v DC single coloured LED strip
IP66
Can be used with either HV9625 or HV9628
INDOOR/OUTDOOR WEATHERPROOF
12V DC - IP66 WEATHERPROOF IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9661-12V30W
240v AC
12v DC 30w
(H)20x (W)32x (L)260
HV9661-12V60W
240v AC
12v DC 60w
(H)20x (W)32x (L)300
HV9661-12V100W
240v AC
12v DC 100w
(H)23x (W)32x (L)330
HV9661-12V150W
240v AC
12v DC 150w
(H)23x (W)32x (L)368
PART NUMBER
IP66
INDOOR/OUTDOOR WEATHERPROOF
24V DC - IP66 WEATHERPROOF IMAGE
279
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9661-24V30W
240v AC
24v DC 30w
(H)20x (W)32x (L)260
HV9661-24V60W
240v AC
24v DC 60w
(H)20x (W)32x (L)300
HV9661-24V100W
240v AC
24v DC 100w
(H)23x (W)32x (L)330
HV9661-24V150W
240v AC
24v DC 150w
(H)23x (W)32x (L)368
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Drivers Dali Dimmable Drivers
• • • • •
Dali Dimmable LED drivers Constant voltage 12v or 24v DC Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v or 24v DC single coloured LED strip
IP66
INDOOR/OUTDOOR WEATHERPROOF
12V DC - IP66 WEATHERPROOF IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9663-12V30W
240v AC
12v DC 30w
(H)20x (W)32x (L)260
HV9663-12V60W
240v AC
12v DC 60w
(H)20x (W)32x (L)300
HV9663-12V100W
240v AC
12v DC 100w
(H)23x (W)32x (L)330
PART NUMBER
IP66
INDOOR/OUTDOOR WEATHERPROOF
24V DC - IP66 WEATHERPROOF IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9663-24V30W
240v AC
24v DC 30w
(H)20x (W)32x (L)260
HV9663-24V60W
240v AC
24v DC 60w
(H)20x (W)32x (L)300
HV9663-24V100W
240v AC
24v DC 100w
(H)23x (W)32x (L)330
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
280
12v DC Constant Voltage • Must be installed with adequate ventilation • Suits Havit 12v LED products • IP Rating: IP65
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9665-12V4W
240v AC
12v DC 4w
(H)21x (W)27x (L)47
12v DC Constant Voltage
• • • •
Supplied with flex and plug Must be installed with adequate ventilation
INDOOR USE ONLY
IP Rating: IP20 IMAGE
281
IP20
Suits Havit 12v LED Strip
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9666-12V20W
240v AC
12v DC 20w
(H)13x (W)50x (L)128
HV9666-12V30W
240v AC
12v DC 30w
(H)16x (W)53x (L)155
HV9667-12V60W
240v AC
12v DC 60w
(H)32x (W)61x (L)184
HV9667-12V75W
240v AC
12v DC 75w
(H)32x (W)61x (L)184
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Drivers 24v DC Constant Voltage • • • •
Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 24v LED Strip IP Rating: IP20
IP20 INDOOR USE ONLY
IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9666-24V20W
240v AC
24v DC 20w
(H)13x (W)50x (L)128
HV9666-24V30W
240v AC
24v DC 30w
(H)16x (W)53x (L)155
HV9667-24V60W
240v AC
24v DC 60w
(H)32x (W)61x (L)184
HV9667-24V75W
240v AC
24v DC 75w
(H)32x (W)61x (L)184
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
282
Lighting by Havit 19mm x 21mm
26mm x 18mm
10mm x 10mm
16mm x 16mm
30mm x 30mm
ALU | BLK |WHT 23
22.8
16.5
10
30
16
20
.2
6
11
10
23.6
6 19.5
10
16
26.2
30
HV9690-2119 - Page 285
HV9690-2618 - Page 286
HV9691-1010 - Page 287
HV9691-1616 - Page 288
HV9691-3030 - Page 289
19mm x 30mm
5mm x 7mm
9mm x 15mm
10mm x 25mm
10mm x 89mm 9.8mm
9.8 6.52
29.5
7
16
4
15
5.4
19
8
31.55mm 6.5mm
25.4
18.88
6 mm
21.06mm
88.6mm
5 mm
9.6
24.5mm
HV9692-1930 - Page 290
HV9693-0607 - Page 291
HV9693-0915-Page 292
HV9693-1045-BLK-Page 293
HV9693-1089 - Page 294
10mm x 7mm
15mm x 6mm
16mm x 12mm
18mm x 9mm
18mm x 6mm
ALU | BLK | WHT
ALU | BLK | WHT
BENDABLE
7
6.6
6
11.2 15.2
10
11.2
12
8.5
13
5.7
13.5
18
18
16
HV9693-1007-Page 295
HV9693-1506 - Page 296
HV9693-1612 - Page 297
HV9693-1707 - Page 298
HV9693-1806 - Page 300
19mm x 8mm
18mm x 13mm
18mm x 15mm
18mm x 96mm
20mm x 25mm
18.0mm
ALU | BLK | WHT 8
12.5
13 12.2
18.8
1.5
12.1
16
17.8
12.6mm
24.82mm
96.5mm
28.96mm
1.75mm
14.2mm
1.5mm
13
1.5
12.1
BLK WHT
BLK | WHT
14.7mm
31.85mm
16.2mm
19.7mm 24.5mm
18
15.67mm
HV9693-1808 - Page 301
HV9693-1812 - Page 302
HV9693-1815 - Page 303
HV9693-1896 - Page 304
HV9693-2025 - Page 305
20mm x 70mm
19mm x 14mm
21mm x 21mm
23mm x 10mm
23mm x 28mm
ALU | BLK | WHT
70
17
16.2
13.7
15
21
28
14
25
19.5
20
16.8
20
21
23
10
19.2 23.2
HV9693-2070 - Page 306
HV9693-1922 - Page 307
HV9693-2114 - Page 308
HV9693-2310 - Page 309
HV9693-2320 - Page 310
35mm x 37mm
38mm x 90mm
45mm x 11mm
49mm x 75mm
60mm x 70mm
ALU | BLK | WHT
ALU | BLK |WHT
ALU | BLK |WHT
38
28.8
40 30
37
90
31 39
37.2
11.3
HV9693-3890 - Page 312
27.6 70
24
44.8 40
35
HV9693-3537 - Page 311
74.5
HV9693-4511 - Page 313
49
HV9693-4975 - Page 314
57.6 29.3
41.2
60
HV9693-6070 - Page 315
DIAGRAMS ARE NOT TO SCALE
283
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile 60mm x 80mm
80mm x 35mm
ALU | BLK |WHT
82mm x 90mm
11mm x 45mm
11mm x 70mm
ALU | BLK |WHT
BLK |WHT
BLK |WHT 11mm
11mm
19.1
4.23mm
80
35
41.2 80
57.2
4.23mm
89.5
45mm 19.99mm
7mm
51.2
70mm
4.23mm
60
82
HV9693-6080 - Page 316
HV9693-8035 - Page 317
HV9693-8090-Page 318
HV9694-1145 - Page 319
HV9694-1170 - Page 320
6mm x 25mm
11mm x 7mm
25mm x 9mm
25mm x 16mm
24mm x 20mm
ALU | BLK |WHT
ALU | BLK |WHT
2.1 10
10.8
25
7
4.2
Cut Out = 19mm 23.7
Cut Out = 19mm 25
Cut Out = 19mm 25 8.5
13 18
6.2
16 13 18
6.1
HV9695-1107 - Page 322
HV9695-2507-Page 323
HV9695-2515 - Page 324
30mm x 10mm
44mm x 35mm
44mm x 40mm
100mm x 35mm
Cut Out = 35mm
Cut Out = 35mm
44
44
10
20.6
35
34
23
12.4
HV9695-2520 - Page 325
Cut Out = 81mm 100
30
9
19.7
12.7
HV9694-0625 - Page 321
Cut Out = 24mm
LD1170
40
35
45
35
31
HV9695-2810 - Page 326
HV9695-4435 - Page 327
HV9695-4540 - Page 328
HV9695-9835 - Page 330
19mm x 9mm
26mm x 26mm
17mm x 8mm
17mm x 15mm
26
19.2 26mm
11.2
8.5 12mm
22.2mm
HV9698-1908 - Page 331
HV9698-2626 - Page 332
HV9699-1708 - Page 333
HV9699-1715 - Page 333
23mm x 8mm
23mm x 15mm
27mm x 7mm
26mm x 26mm
HV9699-2308 - Page 333
HV9699-2315 - Page 334
HV9699-2707 - Page 334
HV9699-1616 - Page 334
DIAGRAMS ARE NOT TO SCALE *All profile custom cut lengths will include end caps. eg 2000mm will cut at 1995mm to allow installation of end caps. *Powder coating available for most models in black or white at an additional cost per metre.
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
284
Lighting by Havit
Semi Round LED Profile • Shallow square profile with rounded diffuser • UV Stabilised PC diffuser
23
16.5 11 6 19.5
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9690-2119
Shallow Square Aluminium Profile with Rounded Diffuser - Kit - / Metre Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9690-2119-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
285
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Semi Round LED Profile • Shallow square profile with rounded diffuser • UV Stabilised PC diffuser
22.8 23.6 26.2
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9690-2618
Shallow Square Aluminium Profile with Rounded Diffuser - Kit - / Metre Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9690-2618-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
286
Lighting by Havit
Corner LED Profile • 90 degree corner profile • UV Stabilised PC diffuser
10
6 10
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
HV9691-1010
90° Corner Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. IP20 Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
3 metres
HV9691-1010-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
3 metres
IP20
MAX LENGTH
SAMPLE INSTALLATION METHOD
287
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Corner LED Profile • 90 degree corner profile • UV Stabilised PC diffuser
16
10 16
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
HV9691-1616
90° Corner Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. IP20 Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
3 metres
HV9691-1616-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9691-1616-BLK
90° Corner Black Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. IP20 Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
3 metres
HV9691-1616-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9691-1616-WHT
90° Corner White Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. IP20 Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
3 metres
HV9691-1616-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
3 metres
IP20
MAX LENGTH
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
288
Lighting by Havit
Corner LED Profile • 90 degree corner profile • UV Stabilised PC diffuser
30
20
.2
30
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9691-3030
90° Corner Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9691-3030-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
289
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Wardrobe LED Profile • For use in wardrobes • UV Stabilised PC diffuser • Max Weight 10kg per metre
29.5
16
19
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9692-1930
Wardrobe Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 1 x centre rod per metre + 2x end caps per length
IP20
3 metres
HV9692-1930-CR
Centre mounting rod to suit HV9692-1930
HV9692-1930-3M
3m length includes aluminium, diffuser, 6x end caps an 3x centre rods
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
290
Lighting by Havit
Micro Square LED Profile • Micro square profile • UV Stabilised PC diffuser
7 4.2 6.6
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-0607
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-0607-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
291
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Square profile • UV Stabilised PC diffuser
15
8 9.6
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-0915
9mm x 15mm Square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-0915-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
292
Lighting by Havit
Slim Square LED Profile • Slim Square Profile • UV Stabilised PC Diffuser 9.8 6.52
18.88
25.4
IP20 INDOOR USE ONLY
Optional suspension kit HV9693-1045-SUSKIT
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1045-BLK
Black Slim Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1045-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-1045-WHT
White Slim Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1045-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
293
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Slim Square LED Profile • Slim Square Profile • UV Stabilised PC Diffuser 9.8mm
31.55mm 6.5mm
21.06mm
6 mm
88.6mm
5 mm
24.5mm
IP20 INDOOR USE ONLY
Optional suspension kit HV9693-1089-SUSKIT
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1089-BLK
Black Slim Aluminium Square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1089-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-1089-WHT
White Slim Aluminium Square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1089-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
294
Lighting by Havit
Square LED Profile • Shallow square profile • UV Stabilised PC diffuser
7
6.6
10
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1007
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1007-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
295
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Shallow square profile • UV Stabilised PC diffuser
11.2 15.2
6
HV9693-1506-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1506
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1506-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
296
Lighting by Havit
Square LED Profile • Shallow square profile • UV Stabilised PC diffuser
12
11.2 16
HV9693-1612-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1612
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1612-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1612-BLK
Black Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1612-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1612-WHT
White Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1612-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
297
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Shallow square profile • UV Stabilised PC diffuser
13
8.5
18
HV9693-1707-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1707
18mm x 9mm Shallow square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1707-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1707-BLK
18mm x 9mm Black shallow square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1707-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1707-WHT
18mm x 9mm White shallow square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1707-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
298
Lighting by Havit
Lighting by Havit 299 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
Aluminium Profile
Bendable LED Profile • Shallow square profile • UV Stabilised PC diffuser
13.5
5.7
18
HV9693-1806-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1806
Shallow Square Bendable Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1806 -3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
clip
clip
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
300
Lighting by Havit
IP65 Rated Square LED Profile • Shallow square profile • UV Stabilised PC diffuser • Profile can only be installed using supplied mounting clips
8
12.5 18.8
1.5
12.1
IP65
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1808
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps and seals per length
IP65
3 metres
HV9693-1808-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP65
3 metres
SAMPLE INSTALLATION METHOD
301
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
IP65 Rated Square LED Profile • Shallow square profile • UV Stabilised PC diffuser • Profile can only be installed using supplied mounting clips
13 12.2 17.8 12.1
1.5
IP65
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1812
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps and seals per length
IP65
3 metres
HV9693-1812-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP65
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
302
Lighting by Havit
Square LED Profile • Deep square profile • UV Stabilised PC diffuser
16 13 18
HV9693-1815-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1815
18mm x 15mm Deep square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1815-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1815-BLK
18mm x 15mm Black Deep square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1815-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1815-WHT
18mm x 15mm White Deep square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1815-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
303
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Slim Square LED Profile • Slim Square Profile • UV Stabilised PC Diffuser
18.0mm
31.85mm
14.7mm
96.5mm
28.96mm
14.2mm
24.5mm
Optional suspension kit HV9693-1896-SUSKIT
IP20
15.67mm
INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1896-BLK
Black Slim Deep square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1896-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1896-WHT
White Slim Deep square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1896-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
304
Lighting by Havit
Deep Diffuser LED Profile • Square Profile with Deep Diffuser • UV Stabilised PC Diffuser 12.6mm
24.82mm 1.75mm 1.5mm
16.2mm
19.7mm
IP20 INDOOR USE ONLY
Optional suspension kit Optional surface mount clip HV9693-2025-SUSKIT HV9693-2025-SMCLIP
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2025-BLK
Black square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2025-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-2025-WHT
White square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2025-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
305
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Square aluminium profile • UV Stabilised PC Diffuser
70
15
17
25
20
IP20 INDOOR USE ONLY
Optional suspension kit HV9705-9953
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2070
Deep Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2070-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-2070-BLK
Black Deep Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2070-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-2070-WHT
White Deep Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2070-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
306
Lighting by Havit
Square LED Profile • Deep square profile • UV Stabilised PC diffuser • Supplied with aluminium mounting bar
13.7
16.2
19.5
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1922
19mm x 14mm Deep square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1922-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
307
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Shallow square profile with square diffuser • UV Stabilised PC diffuser
21 14 16.8 21
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2114
21mm x 21mm Deep square profile with square diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-2114-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
308
Lighting by Havit
Square LED Profile • Shallow double square profile • UV Stabilised PC diffuser
10
20 23
HV9693-2310-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2310
23mm x 10mm Shallow double square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-2310-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
309
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Deep square profile • UV Stabilised PC diffuser
28 19.2 23.2
HV9693-2320-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2320
23mm x 28mm Deep square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2320-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
310
Lighting by Havit
Square LED Profile • Deep square profile • UV Stabilised PC diffuser
37
31 35 HV9693-3537-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
Optional suspension kit HV9705-9953
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-3537
35mm x 37mm Deep square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3537-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-3537-BLK
35mm x 37mm Black deep square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3537-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-3537-WHT
35mm x 37mm White deep square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3537-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
311
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Large Deep square profile • UV Stabilised PC diffuser 38
40 30 90 39
HV9693-3890-SD: Diffuser available for continuous run of up to 20 metres
IP20
PART NUMBER
DESCRIPTION
IP RATING
HV9693-3890
38mm x 90mm Square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3890-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-3890-BLK
38mm x 90mm Black Square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3890-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-3890-WHT
38mm x 90mm White Square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3890-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
INDOOR USE ONLY
Optional suspension kit HV9705-9953
MAX LENGTH
SAMPLE INSTALLATION METHOD
DRIVER DRIVER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
312
Lighting by Havit
Square LED Profile • Large shallow square profile • UV Stabilised PC diffuser
37.2
11.3
44.8
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-4511
45mm x 11mm Large shallow square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-4511-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
313
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Deep square profile • UV Stabilised PC diffuser
74.5
27.6 24 40 49
IP20 INDOOR USE ONLY
Optional suspension kit HV9705-9953
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-4975
49mm x 75mm Deep square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-4975-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
314
Lighting by Havit
Square LED Profile • Large Up/Down square profile • UV Stabilised PC diffuser
28.8
70
57.6 29.3
41.2
60
HV9693-6070-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
Optional surface mount clip HV9705-SM
Optional suspension kit HV9705-9953
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-6070
60mm x 70mm Deep large square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6070-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-6070-BLK
60mm x 70mm Black deep large square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6070-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-6070-WHT
60mm x 70mm White deep large square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6070-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
DRIVER DRIVER
315
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Large Up/Down square profile • UV Stabilised PC diffuser
80
19.1
57.2
60
HV9693-6080-SD-B: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
Top View
Optional suspension kit Hv9705-9952
PART NUMBER
DESCRIPTION
IP RATING
HV9693-6080
60mm x 80mm up/down profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6080 -3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-6080-BLK
60mm x 80mm Black up/down profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6080 -BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-6080-WHT
60mm x 80mm White up/down profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
IP20
3 metres
HV9693-6080 -WHT-3M 3m Length includes aluminium, diffuser + 6x end caps
MAX LENGTH
SAMPLE INSTALLATION METHOD
DRIVER
DRIVER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
316
Lighting by Havit
Square LED Profile • Large deep square profile • UV Stabilised PC diffuser
35
41.2 80
HV9693-8035-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-8035
80mm x 35mm Large deep square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-8035-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
317
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Square LED Profile • Large deep square profile • UV Stabilised PC diffuser • Adjustable strip height via movable insert
89.5 51.2
82
HV9693-8090-SD: Diffuser available for continuous run of up to 20 metres
IP20
PART NUMBER
DESCRIPTION
IP RATING
HV9693-8090
82mm x 90mm Deep large square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-8090-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-8090-BLK
82mm x 90mm Black deep large square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-8090-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-8090-WHT
82mm x 90mm White deep large square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-8090-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
INDOOR USE ONLY
Optional suspension kit HV9705-9953
MAX LENGTH
SAMPLE INSTALLATION METHOD
DRIVER
DRIVER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
318
Lighting by Havit
Side Mount LED Profile • Side Mount LED Profile • UV Stabilised PC diffuser 11mm
4.23mm 45mm 7mm
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9694-1145-BLK
11mm x 45mm Black side mounted profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9694-1145-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9694-1145-WHT
11mm x 45mm White side mounted profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9694-1145-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
319
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Up & Down Side Mount LED Profile • Up & Down Side Mount LED Profile • UV Stabilised PC diffusers 11mm
4.23mm
19.99mm
70mm
4.23mm
LD1170
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9694-1170-BLK
11mm x 70mm Black up/down side mounted profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9694-1170-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9694-1170-WHT
11mm x 70mm White up/down side mounted profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9694-1170-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
320
Lighting by Havit
Side Mount LED Profile • Slim side mounted square profile • UV Stabilised PC diffuser 2.1 10 25
6.1
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
HV9694-0625
6mm x 25mm Side Mounted square profile with UV Stabilised PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
MAX LENGTH 1 metres
SAMPLE INSTALLATION METHOD
321
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Micro Winged LED Profile • Shallow micro winged square profile • UV Stabilised PC diffuser • Suitable for recessed installation 10.8
4.2
7
6.2
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-1107
11mm x 7mm Micro winged square profile with UV Stabilised PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser,2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-1107-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
322
Lighting by Havit
Winged LED Profile • Shallow winged square profile • UV Stabilised PC diffuser • Suitable for recessed installation Cut Out = 19mm 25 8.5
13 18
HV9695-2507-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-2507
25mm x 9mm Shallow winged square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2507-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9695-2507-BLK
25mm x 9mm Black shallow winged square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2507-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9695-2507-WHT
25mm x 9mm White shallow winged square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2507-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
323
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Winged LED Profile • Deep winged square profile • UV Stabilised PC diffuser • Suitable for recessed installation Cut Out = 19mm 25
16 13 18
HV9695-2515-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-2515
25mm x 16mm Deep winged square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2515-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9695-2515-BLK
25mm x 16mm Black Deep winged square profile with PC diffuser. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2515-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9695-2515-WHT
25mm x 16mm White Deep winged square profile with PC diffuser. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2515-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
324
Lighting by Havit
Winged LED Profile • • • •
Deep winged square profile UV Stabilised PC diffuser Supplied with spring clips Suitable for recessed installation Cut Out = 19mm 23.7
19.7
12.4
12.7
HV9695-2520-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-2520
25mm x 20mm Deep winged square profile with UV Stabilised PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x Spring Clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2520 -3M
3m Length includes aluminium, diffuser + 6x end caps & 6x spring clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
325
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Winged LED Profile • Shallow winged square profile • UV Stabilised PC diffuser • Suitable for recessed installation Cut Out = 24mm 30
9
10
20.6 23
HV9695-2810-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-2810
30mm x 10mm Shallow winged square profile with UV Stabilised PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2810-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
326
Lighting by Havit
Winged LED Profile • Large square winged profile • UV Stabilised PC diffuser • Suitable for recessed installation Cut Out = 35mm 44
35
34
35
HV9695-4435-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-4435
44mm x 35mm Large square winged profile with UV Stabilised PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9695-4435-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
327
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Winged LED Profile • • • •
Large square winged profile UV Stabilised PC diffuser Supplied with spring clips Suitable for recessed installation
Cut Out = 35mm 44
40
31
HV9695-4540-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-4540
44mm x 40mm Large square winged profile with UV Stabilised PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x spring clips per metre + 2x end caps per length
IP20
3 metres
HV9695-4540-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x spring clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
328
Lighting by Havit
Lighting by Havit 329 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
Aluminium Profile
Winged LED Profile • Large deep square winged profile • UV Stabilised PC diffuser • Suitable for recessed installation
Cut Out = 81mm 100 35
45
HV9695-9835-SD: Diffuser available for continuous run of up to 20 metres
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-9835
100mm x 35mm Large deep square winged profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x spring clips per metre + 2x end caps per length
IP20
3 metres
HV9695-9835-3M
3m Length includes aluminium, diffuser, 6x spring clips + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
330
Lighting by Havit
Foot Trafficable LED Profile • UV Stabilised PC diffuser • Foot trafficable • Adequate drainage must be allowed 19.2 8.5
11.2
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9698-1908
19mm x 9mm Profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9698-1908-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
331
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile
Foot Trafficable LED Profile • UV Stabilised PC diffuser • Foot trafficable • Adequate drainage must be allowed 26
26mm 12mm
22.2mm
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9698-2626
26mm x 26mm Profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9698-2626-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
332
Lighting by Havit 16.2
12.2
8.0
17.2
• • • •
Aluminium profile for LED strip Shallow square profile UV Stabilised PC diffuser Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-1708-2M
17 x 8mm shallow square profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
16.2
15.3 12.2 17.2
• • • •
Aluminium profile for LED strip Deep square profile UV Stabilised PC diffuser Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-1715-2M
17mm x 15mm deep square profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
16.2 6.0
12.2
8.0
17.2
• • • • •
Aluminium profile for LED strip Shallow winged square profile UV Stabilised PC diffuser Suitable for recessed installation Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
HV9699-2308-2M
23mm x 8mm shallow winged profile with UV Stabilised PC diffuser - 2 metre length IP20
333
IP RATING
LENGTH 2 metres
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Aluminium Profile 23.3
15.3
13.3 12.2 17.2
• • • • •
Aluminium profile for LED strip Deep winged square profile UV Stabilised PC diffuser Suitable for recessed installation Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-2315-2M
23mm x 15mm deep winged profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
27.0 5.0
• • • •
24.0
7.0
Aluminium profile for LED strip Shallow double square profile UV Stabilised PC diffuser Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-2707-2M
27mm x 7mm shallow square profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
16.0 10.0
• • • •
16.0
Aluminium profile for LED strip 90 degree corner profile UV Stabilised PC diffuser Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-1616-2M
16mm x 16mm corner profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
334
Lighting by Havit LED Profile Suspension Kit
• Suspension kit to suit aluminium profile
HV9705-9953
HV9705-9952
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9705-9952
2metre suspension kit to suit HV9693-6080 aluminium profile
IP20
2 metres
HV9705-9953
2metre suspension kit to suit aluminium profile
IP20
2 metres
HV9705-9954
Suspension cable to suit HV9705-9952 & HV9705-9953
IP20
100 metres
HV9705-9955
2 core low voltage suspension cable to suit HV9705-9956
IP20
100 metres
HV9705-9956
Suspension kit to suit HV9705-9955
IP20
N/A
10mm Aluminum Heat Sink • Heat dissipating surface to suit Havit LED strip
PART NUMBER
DESCRIPTION
IP RATING
HV9705-1003
10mm x 3mm Aluminum Heat Sink
IP20
MAX LENGTH 3 metres
16mm Aluminum Heat Sink • Heat dissipating surface to suit Havit LED strip
PART NUMBER
DESCRIPTION
IP RATING
HV9705-1603
16mm x 3mm Aluminum Heat Sink
IP20
MAX LENGTH 3 metres
20mm Aluminum Heat Sink • Heat dissipating surface to suit Havit LED strip
PART NUMBER
DESCRIPTION
IP RATING
HV9705-2003
20mm x 3mm Aluminum Heat Sink
IP20
335
MAX LENGTH 3 metres
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Lighting By Havit
All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003, HV9705-1603 or HV9705-2003) All IP67 LED Strip measurements do not include the end caps, please refer to Profile and LED Strip compatability chart for correct models. When choosing LED Strip to suit profile, remember to consider the cutting increments of the strip.
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
Lighting by Havit 336
www.havit.com.au
HV9693-4511
HV9693-3890
HV9693-3537
HV9693-2320
HV9693-2310
HV9693-2114
HV9693-2025
HV9693-1922
HV9693-1896
HV9693-1815
HV9693-1812
HV9693-1808
HV9693-1707
HV9693-1806
HV9693-1612
HV9693-1506
HV9693-1089
HV9693-1045
HV9693-1007
HV9693-0915
HV9693-0607
HV9692-1930
HV9691-3030
HV9691-1616
HV9691-1010
HV9690-2618
HV9690-2119
Lighting by Havit
HV9722-IP20-64-3K HV9722-IP20-64-4K HV9722-IP20-64-5K
HV9722-IP20-128-3K HV9722-IP20-128-4K HV9722-IP20-128-5K
HV9723-IP20-60-3K HV9723-IP20-60-4K HV9723-IP20-60-5K
33 7 333 7 7 7 7 7 3333333333333333
HV9723-IP20-60-R HV9723-IP20-60-G HV9723-IP20-60-B
HV9723-IP20-120-3K HV9723-IP20-120-4K HV9723-IP20-120-5K
HV9723-IP20-240-3K-1 HV9723-IP20-240-4K-1 HV9723-IP20-240-5K-1
33 7 333 7 7 7 7 7 3333333333333333
HV9723-IP20-240-3K-2 HV9723-IP20-240-4K-2 HV9723-IP20-240-5K-2
33 7 7 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 33333333
HV9731-IP20-180-3K HV9733-IP20-180-3K
HV9731-IP20-180-4K HV9733-IP20-180-4K
HV9731-IP20-180-5K HV9733-IP20-180-5K
333333333333333333333333333
HV9734-IP20-240-3K HV9735-IP20-240-3K
HV9734-IP20-240-4K HV9735-IP20-240-4K
HV9734-IP20-240-5K HV9735-IP20-240-5K
333333333333333333333333333
HV9741-IP20-60-3K HV9761-IP20-60-3K HV9782-IP20-64-3K HV9783-IP20-60-3K HV9783-IP20-120-3K
HV9741-IP20-60-4K HV9761-IP20-60-4K HV9782-IP20-64-4K HV9783-IP20-60-4K HV9783-IP20-120-4K
HV9741-IP20-60-5K HV9761-IP20-60-5K HV9782-IP20-64-5K HV9783-IP20-60-5K HV9783-IP20-120-5K
33 7 333 7 7 7 7 7 3333333333333333
HV9783-IP20-168-3K
HV9783-IP20-168-4K
HV9783-IP20-168-5K
7 3 7 7 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 33333
HV9783-IP20-252-3K
HV9783-IP20-252-4K
HV9783-IP20-252-5K
777777777777777777777777777 33 7 333 7 7 7 7 7 3333333333333333
HV9783-IP20-120-CT HV9723-IP54-60-3K HV9723-IP54-60-B
HV9723-IP54-60-4K
HV9723-IP54-60-5K
HV9723-IP54-120-3K HV9723-IP54-240-3K-1 HV9783-IP54-60-3K
HV9723-IP54-120-4K HV9723-IP54-240-4K-1 HV9783-IP54-60-4K
HV9723-IP54-120-5K HV9723-IP54-240-5K-1 HV9783-IP54-60-5K
HV9723-IP67-60-3K HV9723-IP67-60-B HV9723-IP67-120-3K HV9723-IP67-240-3K-1
HV9723-IP67-60-4K
HV9723-IP67-60-5K
HV9723-IP67-120-4K HV9723-IP67-240-4K-1
HV9723-IP67-120-5K HV9723-IP67-240-5K-1
HV9768-IP67-280-3K HV9769-IP67-280-3K
HV9768-IP67-280-4K HV9769-IP67-280-4K
HV9768-IP67-280-5K HV9769-IP67-280-5K
7 3 7 7 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 33333333
HV9783-IP67-60-3K
HV9783-IP67-60-4K
HV9783-IP67-60-5K
7 3 7 7 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 33333333
33 7 333 7 7 7 7 7 3333333333333333 7 3 7 7 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 33333333
33 7 333 7 7 7 7 7 3333333333333333
HV9750-IP54-60-CHRGB HV9750-IP20-30-RGB
33 7 333 7 7 7 7 7 3333333333333333
33 7 333 7 7 7 7 7 3333333333333333
HV9750-IP54-30-RGB
HV9750-IP67-30-RGB
33 7 7 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 33 7 33333
HV9751-IP20-60-RGBC HV9751-IP54-60-RGBC HV9751-IP20-60-RGBW HV9751-IP54-60-RGBW
33 7 333 7 7 7 7 7 7 7 33333333333333
HV9751-IP67-60-RGBC
HV9751-IP67-60-RGBW
7 3 7 7 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 3333333
HV9723-IP20-96SM-3K HV9723-IP20-96SM-R
HV9723-IP20-96SM-4K HV9723-IP20-96SM-G
HV9723-IP20-96SM-5K HV9723-IP20-96SM-B
777777777777777777777777777
HV9791-IP67-140-3K
HV9791-IP67-140-4K
HV9791-IP67-140-5K
7 7 7 7 7 737 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
HV9792-IP67-140-3K HV9792-IP67-336-RGB
HV9792-IP67-140-4K
HV9792-IP67-140-5K
7 7 7 7 7 7 737 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
HV9795-IP67-90-5K
777777777777777777777777777
HV9795-IP67-90-3K HV9795-IP67-90-4K HV9795-IP67-90-RGBW
337
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
HV9795-ALU
HV9792-ALU
HV9791-ALU
HV9699-1616-2M
HV9699-2707-2M
9699-2315-2M
HV9699-2308-2M
HV9699-1715-2M
HV9699-1708-2M
HV9698-2626
HV9698-1908
HV9695-9835
HV9695-4540
HV9695-4435
HV9695-2810
HV9695-2520
HV9695-2515
HV9695-2507
HV9695-1107
HV9694-1170
HV9694-1145
HV9694-0625
HV9693-8090
HV9693-8035
HV9693-6080
HV9693-6070
HV9693-4975
Profile Compatibility Chart
HV9722-IP20-64-3K
HV9722-IP20-128-3K HV9722-IP20-128-4K HV9722-IP20-128-5K
HV9723-IP20-60-3K HV9723-IP20-60-4K HV9723-IP20-60-5K
HV9723-IP20-60-R
HV9723-IP20-120-3K HV9723-IP20-120-4K HV9723-IP20-120-5K
HV9723-IP20-240-3K-1 HV9723-IP20-240-4K-1 HV9723-IP20-240-5K-1
3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9722-IP20-64-4K HV9722-IP20-64-5K 3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9723-IP20-60-G HV9723-IP20-60-B
3 3 3 3 3 7 7 7 7 7 7 7 3 3 3 3 7 7 7 7 7 7 3 7 7 7 7 HV9723-IP20-240-3K-2 HV9723-IP20-240-4K-2 HV9723-IP20-240-5K-2 3 3 3 3 3 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9731-IP20-180-3K HV9733-IP20-180-3K
HV9731-IP20-180-4K HV9733-IP20-180-4K
HV9731-IP20-180-5K HV9733-IP20-180-5K
3 3 3 3 3 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9734-IP20-240-3K HV9735-IP20-240-3K
HV9734-IP20-240-4K HV9735-IP20-240-4K
HV9734-IP20-240-5K HV9735-IP20-240-5K
HV9741-IP20-60-3K HV9761-IP20-60-3K HV9782-IP20-64-3K HV9783-IP20-60-3K HV9783-IP20-120-3K
HV9741-IP20-60-4K HV9761-IP20-60-4K HV9782-IP20-64-4K HV9783-IP20-60-4K HV9783-IP20-120-4K
HV9741-IP20-60-5K HV9761-IP20-60-5K HV9782-IP20-64-5K HV9783-IP20-60-5K HV9783-IP20-120-5K
3 3 3 3 3 7 7 7 7 7 7 7 3 3 3 3 7 7 7 7 7 7 3 7 7 7 7 HV9783-IP20-168-3K
HV9783-IP20-168-4K
HV9783-IP20-168-5K
3 3 3 3 3 7 7 7 7 7 7 7 7 7 7 3 7 7 7 7 7 7 7 7 7 7 7 HV9783-IP20-252-3K
HV9783-IP20-252-4K
HV9783-IP20-252-5K
HV9723-IP54-60-4K
HV9723-IP54-60-5K
HV9723-IP54-120-3K
HV9723-IP54-120-4K HV9723-IP54-240-4K-1 HV9783-IP54-60-4K
HV9723-IP54-120-5K HV9723-IP54-240-5K-1 HV9783-IP54-60-5K
HV9723-IP67-60-3K
HV9723-IP67-60-4K
HV9723-IP67-60-5K
HV9723-IP67-240-3K-1
HV9723-IP67-120-4K HV9723-IP67-240-4K-1
HV9723-IP67-120-5K HV9723-IP67-240-5K-1
3 3 3 3 3 7 7 7 7 7 7 7 3 3 3 3 7 7 7 7 7 7 7 7 7 7 7 HV9768-IP67-280-3K HV9769-IP67-280-3K
HV9768-IP67-280-4K HV9769-IP67-280-4K
HV9768-IP67-280-5K HV9769-IP67-280-5K
3 3 3 3 3 7 7 7 7 7 7 7 3 3 3 3 7 7 7 7 7 7 7 7 7 7 7 HV9783-IP67-60-3K
HV9783-IP67-60-4K
HV9783-IP67-60-5K
33333 7 7 7 7 333333333333333 7 7 7
3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9783-IP20-120-CT 3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9723-IP54-60-3K HV9723-IP54-60-B 3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9723-IP54-240-3K-1 HV9783-IP54-60-3K 3 3 3 3 3 7 7 7 7 7 7 7 3 3 3 3 7 7 7 7 7 7 7 7 7 7 7 HV9723-IP67-60-B HV9723-IP67-120-3K
3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9750-IP54-60-CHRGB 3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9750-IP20-30-RGB
HV9750-IP54-30-RGB
3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 7 7 7 7 7 7 7 7 7 7 7 HV9750-IP67-30-RGB 3 3 3 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 7 7 HV9751-IP20-60-RGBC HV9751-IP20-60-RGBW
HV9751-IP54-60-RGBC HV9751-IP54-60-RGBW
3 3 3 3 3 7 7 7 7 3 3 3 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 HV9751-IP67-60-RGBC
HV9751-IP67-60-RGBW
7 7 7 7 7 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 HV9723-IP20-96SM-3K HV9723-IP20-96SM-R
HV9723-IP20-96SM-4K HV9723-IP20-96SM-G
HV9723-IP20-96SM-5K HV9723-IP20-96SM-B
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 3 7 7 HV9791-IP67-140-3K
HV9791-IP67-140-4K
HV9791-IP67-140-5K
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 3 7 HV9792-IP67-140-3K HV9792-IP67-336-RGB
HV9792-IP67-140-4K
HV9792-IP67-140-5K
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 3 HV9795-IP67-90-3K HV9795-IP67-90-RGBW
HV9795-IP67-90-4K
HV9795-IP67-90-5K
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
338
Lighting by Havit
Image for illustration purposes only.
20 Metre Long Run LED Strip Lighting • • • • • •
LED flexible strip light Maximum length of 20m CRI: ≥90 Dimmable Peel and stick backing for initial placement Beam angle 120 degrees
3000K, 4000K & 5500K - CRI: ≥90 - IP20 INDOOR IMAGE
PART NUMBER
SMD
IP RATING
LED PER METRE
HV9741-IP20-60-3K
3040
IP20
60
450LM
24v DC
4.8w/m
20m
100mm
10x2mm
HV9741-IP20-60-4K
3040
IP20
60
475LM
24v DC
4.8w/m
20m
100mm
10x2mm
HV9741-IP20-60-5K
3040
IP20
60
500LM
24v DC
4.8w/m
20m
100mm
10x2mm
Custom cut orders available.
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
339
LUMENS WATTAGE MAX CUTTING SIZE PER VOLTAGE PER LENGTH INCREMENT WXH METRE METRE
See Pages 337-338 For Havit LED Profile Compatibility Chart
IP20 INDOOR USE ONLY
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip 10 Metre Long Run LED Strip Lighting • • • • • • •
LED flexible strip light Maximum length of 10m Up to 130lm per watt CRI: ≥90 Dimmable Peel and stick backing for initial placement Beam angle 120 degrees
IP20 INDOOR USE ONLY
3000K - CRI: ≥90 - IP20 INDOOR IMAGE
PART NUMBER
SMD
IP RATING
LED PER METRE
LUMENS WATTAGE MAX CUTTING SIZE PER VOLTAGE PER METRE METRE LENGTH INCREMENT WXH
HV9722-IP20-64-3K
2835
IP20
64
520lm
24v DC
4.8w/m
10m
125mm
8x2mm
HV9722-IP20-128-3K
2835
IP20
128
1040lm
24v DC
9.6w/m
10m
63mm
8x2mm
HV9782-IP20-80-3K
2835
IP20
80
1580lm
24v DC
14.4w/m
10m
125mm
10x2mm
4000K - CRI: ≥90 - IP20 INDOOR IMAGE
PART NUMBER
SMD
IP RATING
LED PER METRE
LUMENS WATTAGE MAX CUTTING SIZE PER VOLTAGE PER LENGTH INCREMENT WXH METRE METRE
HV9722-IP20-64-4K
2835
IP20
64
570lm
24v DC
4.8w/m
10m
125mm
8x2mm
HV9722-IP20-128-4K
2835
IP20
128
1140lm
24v DC
9.6w/m
10m
63mm
8x2mm
HV9782-IP20-80-4K
2835
IP20
80
1720lm
24v DC
14.4w/m
10m
125mm
10x2mm
5500K - CRI: ≥90 - IP20 INDOOR IMAGE
PART NUMBER
SMD
IP RATING
LED PER METRE
HV9722-IP20-64-5K
2835
IP20
64
620lm
24v DC
4.8w/m
10m
125mm
8x2mm
HV9722-IP20-128-5K
2835
IP20
128
1240lm
24v DC
9.6w/m
10m
63mm
8x2mm
HV9782-IP20-80-5K
2835
IP20
80
1870lm
24v DC
14.4w/m
10m
125mm
10x2mm
LUMENS WATTAGE MAX CUTTING SIZE PER VOLTAGE PER LENGTH INCREMENT WXH METRE METRE
All LED strip must be installed on an aluminium heat dissipating surface HV9705-1003
HV9705-1603
HV9705-2003
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
340
Lighting by Havit
Image for illustration purposes only.
3000K LED Strip Lighting
IP67
INDOOR/OUTDOOR WEATHERPROOF
IP67 WEATHERPROOF IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9723-IP67-60-3K
3528
IP67
60
390lm
12v DC
4.8w/m
5m
50mm
12x6mm
HV9723-IP67-120-3K
3528
IP67
120
780lm
12v DC
9.6w/m
5m
25mm
12x6mm
HV9723-IP67-240-3K-1
3528
IP67
240
1560lm
24v DC 19.2w/m
5m
25mm
14x6mm
HV9783-IP67-60-3K
2835
IP67
60
1200lm
12v DC 14.4w/m
5m
50mm
14x6mm
IP20 INDOOR USE ONLY
IP20 SIDE MOUNTED IMAGE
PART NUMBER
SMD
HV9723-IP20-96SM-3K
335
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE IP20
96
500lm
12v DC
7.7w/m
5m
33mm
6x2mm
All LED strip must be installed on an aluminium heat dissipating surface HV9705-1003
341
HV9705-1603
HV9705-2003
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip See Pages 337-338 For Havit LED Profile Compatibility Chart
3000K LED Strip Lighting • • • • •
LED flexible strip light Dimmable Peel and stick backing for initial placement Beam angle 120 degrees All LED strip must be installed using anti-static measures and on an
aluminium heat dissipating surface for warranty purposes (HV9705-1003, HV9705-1603 or HV9705-2003)
IP20 INDOOR USE ONLY
IP20 INDOOR IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER RATING METRE METRE METRE LENGTH INCREMENT WXH
PART NUMBER
SMD
HV9723-IP20-60-3K
3528
IP20
60
390lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP20-120-3K
3528
IP20
120
780lm
12v DC
9.6w/m
5m
25mm
8x2mm
HV9723-IP20-240-3K-1
3528
IP20
240
1560lm
24v DC 19.2w/m
5m
25mm
10x2mm
HV9723-IP20-240-3K-2
3528
IP20
240
1560lm
24v DC 19.2w/m
5m
50mm
14x2mm
HV9783-IP20-60-3K
2835
IP20
60
1200lm
12v DC 14.4w/m
5m
50mm
10x2mm
HV9783-IP20-120-3K
2835
IP20
120
1920lm
12v DC
5m
25mm
10x2mm
HV9783-IP20-168-3K
2835
IP20
168
3260lm
24v DC 32.6w/m
5m
83mm
19x2mm
HV9783-IP20-252-3K
2835
IP20
252
4140lm
24v DC
3m
83mm
39x2mm
24w/m
46w/m
IP54
INDOOR/OUTDOOR WEATHERPROOF
IP54 WATER RESISTANT IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9723-IP54-60-3K
3528
IP54
60
390lm
12v DC
4.8w/m
5m
50mm
8x3mm
HV9723-IP54-120-3K
3528
IP54
120
780lm
12v DC
9.6w/m
5m
25mm
8x3mm
HV9723-IP54-240-3K-1
3528
IP54
240
1560lm
24v DC 19.2w/m
5m
25mm
10x3mm
HV9783-IP54-60-3K
2835
IP54
60
1200lm
12v DC 14.4w/m
5m
50mm
10x3mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
342
Lighting by Havit
4000K LED Strip Lighting
IP67
INDOOR/OUTDOOR WEATHERPROOF
IP67 WEATHERPROOF IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9723-IP67-60-4K
3528
IP67
60
410lm
12v DC
4.8w/m
5m
50mm
12x6mm
HV9723-IP67-120-4K
3528
IP67
120
820lm
12v DC
9.6w/m
5m
25mm
12x6mm
HV9723-IP67-240-4K-1
3528
IP67
240
1640lm
24v DC 19.2w/m
5m
25mm
14x6mm
HV9783-IP67-60-4K
2835
IP67
60
1260lm
12v DC 14.4w/m
5m
50mm
14x6mm
IP20
IP20 SIDE MOUNTED IMAGE
INDOOR USE ONLY
PART NUMBER
SMD
HV9723-IP20-96SM-4K
335
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER RATING METRE METRE METRE LENGTH INCREMENT WXH IP20
96
520lm
12v DC
7.7w/m
5m
33mm
6x2mm
All LED strip must be installed on an aluminium heat dissipating surface HV9705-1003
343
HV9705-1603
HV9705-2003
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip See Pages 337-338 For Havit LED Profile Compatibility Chart
4000K LED Strip Lighting • • • • •
LED flexible strip light Dimmable Peel and stick backing for initial placement Beam angle 120 degrees
All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003, HV9705-1603 or HV9705-2003)
IP20
IP20 INDOOR IMAGE
INDOOR USE ONLY
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH RATING METRE INCREMENT WXH METRE METRE
PART NUMBER
CHIP TYPE
HV9723-IP20-60-4K
3528
IP20
60
410lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP20-120-4K
3528
IP20
120
820lm
12v DC
9.6w/m
5m
25mm
8x2mm
HV9723-IP20-240-4K-1
3528
IP20
240
1640lm
24v DC 19.2w/m
5m
25mm
10x2mm
HV9723-IP20-240-4K-2
3528
IP20
240
1640lm
24v DC 19.2w/m
5m
50mm
14x2mm
HV9783-IP20-60-4K
2835
IP20
60
1260lm
12v DC 14.4w/m
5m
50mm
10x2mm
HV9783-IP20-120-4K
2835
IP20
120
2040lm
12v DC
5m
25mm
10x2mm
HV9783-IP20-168-4K
2835
IP20
168
3750lm
24v DC 32.6w/m
5m
83mm
19x2mm
HV9783-IP20-252-4K
2835
IP20
252
4370lm
24v DC
3m
83mm
39x2mm
24w/m
46w/m
IP54
IP54 WATER RESISTANT IMAGE
INDOOR/OUTDOOR WEATHERPROOF
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER RATING METRE METRE METRE LENGTH INCREMENT WXH
PART NUMBER
SMD
HV9723-IP54-60-4K
3528
IP54
60
410lm
12v DC
4.8w/m
5m
50mm
8x3mm
HV9723-IP54-120-4K
3528
IP54
120
820lm
12v DC
9.6w/m
5m
25mm
8x3mm
HV9723-IP54-240-4K-1
3528
IP54
240
1640lm
24v DC 19.2w/m
5m
25mm
10x3mm
HV9783-IP54-60-4K
2835
IP54
60
1260lm
12v DC 14.4w/m
5m
50mm
10x3mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
344
Lighting by Havit
5500K LED Strip Lighting
IP67
INDOOR/OUTDOOR WEATHERPROOF
IP67 WEATHERPROOF IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9723-IP67-60-5K
3528
IP67
60
430lm
12v DC
4.8w/m
5m
50mm
12x6mm
HV9723-IP67-120-5K
3528
IP67
120
860lm
12v DC
9.6w/m
5m
25mm
12x6mm
HV9723-IP67-240-5K-1
3528
IP67
240
1720lm
24v DC 19.2w/m
5m
25mm
14x6mm
HV9783-IP67-60-5K
2835
IP67
60
1320lm
12v DC 14.4w/m
5m
50mm
14x6mm
IP20
IP20 SIDE MOUNTED IMAGE
INDOOR USE ONLY
PART NUMBER
SMD
HV9723-IP20-96SM-5K
335
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH RATING METRE INCREMENT WXH METRE METRE IP20
96
540lm
12v DC
7.7w/m
5m
33mm
6x2mm
All LED strip must be installed on an aluminium heat dissipating surface HV9705-1003
345
HV9705-1603
HV9705-2003
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip See Pages 337-338 For Havit LED Profile Compatibility Chart
5500K LED Strip Lighting • • • • •
LED flexible strip light Dimmable Peel and stick backing for initial placement Beam angle 120 degrees
All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003, HV9705-1603 or HV9705-2003)
IP20
IP20 INDOOR IMAGE
INDOOR USE ONLY
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER RATING METRE METRE METRE LENGTH INCREMENT WXH
PART NUMBER
SMD
HV9723-IP20-60-5K
3528
IP20
60
430lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP20-120-5K
3528
IP20
120
860lm
12v DC
9.6w/m
5m
25mm
8x2mm
HV9723-IP20-240-5K-1
3528
IP20
240
1720lm
24v DC 19.2w/m
5m
25mm
10x2mm
HV9723-IP20-240-5K-2
3528
IP20
240
1720lm
24v DC 19.2w/m
5m
50mm
14x2mm
HV9783-IP20-60-5K
2835
IP20
60
1320lm
12v DC 14.4w/m
5m
50mm
10x2mm
HV9783-IP20-120-5K
2835
IP20
120
2200lm
12v DC
5m
25mm
10x2mm
HV9783-IP20-168-5K
2835
IP20
168
4075lm
24v DC 32.6w/m
5m
83mm
19x2mm
HV9783-IP20-252-5K
2835
IP20
252
4600lm
24v DC
3m
83mm
39x2mm
24w/m
46w/m
IP54
IP54 WATER RESISTANT IMAGE
INDOOR/OUTDOOR WEATHERPROOF
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH RATING METRE INCREMENT WXH METRE METRE
PART NUMBER
SMD
HV9723-IP54-60-5K
3528
IP54
60
430lm
12v DC
4.8w/m
5m
50mm
8x3mm
HV9723-IP54-120-5K
3528
IP54
120
860lm
12v DC
9.6w/m
5m
25mm
8x3mm
HV9723-IP54-240-5K-1
3528
IP54
240
1720lm
24v DC 19.2w/m
5m
25mm
10x3mm
HV9783-IP54-60-5K
2835
IP54
60
1320lm
12v DC 14.4w/m
5m
50mm
10x3mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
346
Lighting by Havit
Micro LED Strip Lighting • • • • •
See Pages 337-338 For Havit LED Profile Compatibility Chart
LED flexible strip light Dimmable Peel and stick backing for initial placement Beam angle 120 degrees All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003, HV9705-1603 or HV9705-2003)
IP20 INDOOR USE ONLY
IP20 INDOOR IMAGE
347
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9731-IP20-180-3K
2216
IP20
180
390lm
24v DC
4.8w/m
5m
33mm
4x2mm
HV9733-IP20-180-3K
2216
IP20
180
780lm
24v DC
9.6w/m
5m
33mm
4x2mm
HV9734-IP20-240-3K
2216
IP20
240
1150lm
24v DC 14.4w/m
5m
25mm
4x2mm
HV9735-IP20-240-3K
2216
IP20
240
1500lm
24v DC 19.2w/m
5m
25mm
4x2mm
HV9731-IP20-180-4K
2216
IP20
180
410lm
24v DC
4.8w/m
5m
33mm
4x2mm
HV9733-IP20-180-4K
2216
IP20
180
820lm
24v DC
9.6w/m
5m
33mm
4x2mm
HV9734-IP20-240-4K
2216
IP20
240
1175lm
24v DC 14.4w/m
5m
25mm
4x2mm
HV9735-IP20-240-4K
2216
IP20
240
1600lm
24v DC 19.2w/m
5m
25mm
4x2mm
HV9731-IP20-180-5K
2216
IP20
180
430lm
24v DC
4.8w/m
5m
33mm
4x2mm
HV9733-IP20-180-5K
2216
IP20
180
860lm
24v DC
9.6w/m
5m
33mm
4x2mm
HV9734-IP20-240-5K
2216
IP20
240
1200lm
24v DC 14.4w/m
5m
25mm
4x2mm
HV9735-IP20-240-5K
2216
IP20
240
1600lm
24v DC 19.2w/m
5m
25mm
4x2mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip COB LED Strip Lighting • LED flexible strip light • Dimmable • Peel and stick backing for initial placement
• Beam angle 120 degrees • All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003, HV9705-1603 or HV9705-2003)
IP20 INDOOR IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH RATING METRE INCREMENT WXH METRE METRE
PART NUMBER
SMD
HV9761-IP20-512-3K
COB
IP20
512
1100lm
12v DC
10w/m
5M
31mm
10x2mm
HV9761-IP20-512-4K
COB
IP20
512
1150lm
12v DC
10w/m
5M
31mm
10x2mm
LED Strip Lighting
IP67 WEATHERPROOF IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER RATING METRE METRE METRE LENGTH INCREMENT WXH
PART NUMBER
SMD
HV9768-IP67-280-3K
2220
IP67
280
768lm
24v DC
9.6w/m
5M
25mm
13x4mm
HV9768-IP67-280-4K
2220
IP67
280
864lm
24v DC
9.6w/m
5M
25mm
13x4mm
HV9768-IP67-280-5K
2220
IP67
280
864lm
24v DC
9.6w/m
5M
25mm
13x4mm
HV9769-IP67-280-3K
2220
IP67
280
1150lm
24v DC 14.4w/m
5M
25mm
13x4mm
HV9769-IP67-280-4K
2220
IP67
280
1300lm
24v DC 14.4w/m
5M
25mm
13x4mm
HV9769-IP67-280-5K
2220
IP67
280
1300lm
24v DC 14.4w/m
5M
25mm
13x4mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
348
Lighting by Havit 50 Metre Rolls • • • • •
IP20
LED flexible strip light 50m roll
INDOOR USE ONLY
Dimmable Peel and stick backing for initial placement Beam angle 120 degrees All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003, HV9705-1603 or HV9705-2003)
• Supplied with 25x easy connect tails
3000K IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9723-IP20-60-3K-50M
3528
IP20
60
390lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP20-120-3K-50M
3528
IP20
120
780lm
12v DC
9.6w/m
5m
25mm
8x2mm
WARRANTY VOID IF MAXIMUM CUT LENGTH EXCEEDS 5 METRES
4000K IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9723-IP20-60-4K-50M
3528
IP20
60
410lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP20-120-4K-50M
3528
IP20
120
820lm
12v DC
9.6w/m
5m
25mm
8x2mm
WARRANTY VOID IF MAXIMUM CUT LENGTH EXCEEDS 5 METRES
5500K IMAGE
PART NUMBER
LED LUMENS IP WATTAGE MAX CUTTING SMD RATING PER PER VOLTAGE PER METRE METRE LENGTH INCREMENT METRE
SIZE WXH
HV9723-IP20-60-5K-50M
3528
IP20
60
430lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP20-120-5K-50M
3528
IP20
120
860lm
12v DC
9.6w/m
5m
25mm
8x2mm
WARRANTY VOID IF MAXIMUM CUT LENGTH EXCEEDS 5 METRES
All LED strip must be installed on an aluminium heat dissipating surface HV9705-1003
349
HV9705-1603
HV9705-2003
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip
NEOLITE Flexible LED Strip • • • •
Flexible NEON LED strip light
IP67
Dimmable
INDOOR/OUTDOOR WEATHERPROOF
Beam angle 120 degrees Supplied with 4x mounting clips per metre
IMAGE
PART NUMBER
SMD
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER RATING METRE METRE METRE LENGTH INCREMENT WXH
HV9795-IP67-200-3K
2835
IP67
120
600lm
24v DC 14.4w/m
5m
50mm
12x17mm
HV9795-IP67-200-4K
2835
IP67
120
620lm
24v DC 14.4w/m
5m
50mm
12x17mm
HV9795-IP67-200-5K
2835
IP67
120
650lm
24v DC 14.4w/m
5m
50mm
12x17mm
HV9795-IP67-200-RGBW
2835
IP67
192
N/A
24v DC 14.4w/m
5m
62.5mm
12x17mm
HV9795-MC
Mounting clip to suit NEOLITE Flexible LED Strip
HV9795-ALU
Optional Aluminium Channel to suit HV9795 - Supplied in 1m length only
ACCESSORIES
Custom cut orders available.
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
350
Lighting by Havit NEOLITE Flexible LED Strip IP67 WEATHERPROOF IMAGE
IMAGE
IP67
INDOOR/OUTDOOR WEATHERPROOF
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER RATING METRE METRE METRE LENGTH INCREMENT WXH
PART NUMBER
SMD
HV9791-IP67-140-3K
2835
IP67
140
400lm
24v DC
9.6w/m
5m
50mm
4x8mm
HV9791-IP67-140-4K
2835
IP67
140
405lm
24v DC
9.6w/m
5m
50mm
4x8mm
HV9791-IP67-140-5K
2835
IP67
140
410lm
24v DC
9.6w/m
5m
50mm
4x8mm
HV9791-ALU
Aluminum Channel to suit HV9791 - custom cut length up to 3m
HV9791-PVC-CHANNEL
White PC Channel to suit HV9791 - Supplied in 1m lengths only
PART NUMBER
SMD
HV9792-IP67-140-3K
2835
IP67
140
600lm
24v DC 14.4w/m
5m
50mm
6x11mm
HV9792-IP67-140-4K
2835
IP67
140
630lm
24v DC 14.4w/m
5m
50mm
6x11mm
HV9792-IP67-140-5K
2835
IP67
140
660lm
24v DC 14.4w/m
5m
50mm
6x11mm
HV9792-ALU
Aluminum Channel to suit HV9792 - custom cut length up to 3m
HV9792-PVC-CHANNEL
White PC Channel to suit HV9792 - Supplied in 1m lengths only
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
IP67
RGB NEOLITE Flexible LED Strip IP67 WEATHERPROOF IMAGE
351
PART NUMBER
SMD
HV9792-IP67-336-RGB
2216
INDOOR/OUTDOOR WEATHERPROOF
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE IP67
336
600lm
24v DC 14.4w/m
5m
63mm
6x11mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip NEOLITE Flexible LED Strip IP67 WEATHERPROOF
RGB NEOLITE Flexible LED Strip IP67 WEATHERPROOF
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
352
Lighting by Havit Coloured LED Strip Lighting • • • • • •
LED flexible strip light Red, Green and Blue Dimmable using Havit LED controllers Peel and stick backing for initial placement Beam angle 120 degrees All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003 or HV9705-1603)
Image for illustration purposes only.
IMAGE
See Pages 337-338 For Havit LED Profile Compatibility Chart
PART NUMBER
IP WATTAGE MAX CUTTING SMD RATING COLOUR LUMENS VOLTAGE PER METRE LENGTH INCREMENT
SIZE WXH
HV9723-IP20-60-R
3528
IP20
Red
143lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP20-60-G
3528
IP20
Green
269lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP20-60-B
3528
IP20
Blue
66lm
12v DC
4.8w/m
5m
50mm
8x2mm
HV9723-IP54-60-B
3528
IP54
Blue
66lm
12v DC
4.8w/m
5m
50mm
8x3mm
HV9723-IP67-60-B
3528
IP67
Blue
66lm
12v DC
4.8w/m
5m
50mm
14x6mm
Side Mounted LED Strip Lighting IMAGE
353
PART NUMBER
IP WATTAGE MAX CUTTING SMD RATING COLOUR LUMENS VOLTAGE PER METRE LENGTH INCREMENT
SIZE WXH
HV9723-IP20-96SM-R
335
IP20
Red
179lm
12v DC
7.7w/m
5m
33mm
6x2mm
HV9723-IP20-96SM-G
335
IP20
Green
350lm
12v DC
7.7w/m
5m
33mm
6x2mm
HV9723-IP20-96SM-B
335
IP20
Blue
92lm
12v DC
7.7w/m
5m
33mm
6x2mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip CT LED Strip Lighting • • • • • •
LED flexible strip light 3000K + 5500K together on one strip Must be used with CT Controllers Peel and stick backing for initial placement Beam angle 120 degrees All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003 or HV9705-1603)
IMAGE
PART NUMBER HV9783-IP20-120-CT
SMD
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
2835
IP20
120
1560lm
12v DC 14.4w/m
5m
50mm
10x2mm
PART NUMBER
IP COLOUR LUMENS VOLTAGE WATTAGE MAX NO. OF SMD RATING PER TEMP LENGTH MODULES MODULE
SIZE LXWXH MM
HV9794-IP65-10-3K
5050
IP65
3000K
650lm
12v DC
0.72w
20 Modules
10
84x16x6
HV9794-IP65-10-5K
5050
IP65
5000K
670lm
12v DC
0.72w
20 Modules
10
84x16x6
HV9794-IP65-10-RGB
5050
IP65
RGB
210lm
12v DC
0.72w
20 Modules
10
84x16x6
HV9794-IP65-20-3K
5050
IP65
3000K
1300lm
12v DC
0.72w
20 Modules
20
84x16x6
HV9794-IP65-20-5K
5050
IP65
5000K
1340lm
12v DC
0.72w
20 Modules
20
84x16x6
HV9794-IP65-20-RGB
5050
IP65
RGB
420lm
12v DC
0.72w
20 Modules
20
84x16x6
Signage Modules
IMAGE
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
354
Lighting by Havit VIPER Strip Kits • • • • • •
Viper LED flexible strip light kits Dimmable using Havit LED controllers Peel and stick backing for initial placement Compete with LED driver with flex and plug Beam angle 120 degrees All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003 or HV9705-1603)
Image for illustration purposes only.
4.8w 3000K LED Strip Lighting Kits IP LED PER LUMENS PER VOLTAGE RATING METRE METRE
POWER
TOTAL WATTAGE
12v DC
4.8w/m
9.6w
390lm
12v DC
4.8w/m
24w
60
390lm
24v DC
4.8w/m
48w
60
390lm
24v DC
4.8w/m
48w
POWER
TOTAL WATTAGE
LENGTH
PART NUMBER
SMD
+
2 mtr
VPR9733IP54-60-2M
3528
IP54
60
390lm
+
5 mtr
VPR9733IP54-60-5M
3528
IP54
60
+
10 mtr
VPR9733IP20-60-10M
3528
IP20
+
10 mtr
VPR9733IP54-60-10M
3528
IP54
IMAGE
14.4w 3000K LED Strip Lighting Kits PART NUMBER
SMD
+
2 mtr
VPR9783IP54-60-2M
2835
IP54
60
1200lm
12v DC
14.4w/m
28.8w
+
5 mtr
VPR9783IP54-60-5M
2835
IP54
60
1200lm
12v DC
14.4w/m
72w
HV9705-1003
355
IP LED PER LUMENS PER VOLTAGE RATING METRE METRE
LENGTH
IMAGE
All LED strip must be installed on an aluminium heat dissipating surface All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Kits LED Strip 4.8w 4000K LED Strip Lighting Kits IP LED PER LUMENS PER VOLTAGE RATING METRE METRE
POWER
TOTAL WATTAGE
12v DC
4.8w/m
9.6w
410lm
12v DC
4.8w/m
24w
60
410lm
24v DC
4.8w/m
48w
60
410lm
24v DC
4.8w/m
48w
POWER
TOTAL WATTAGE
LENGTH
PART NUMBER
SMD
+
2 mtr
VPR9735IP54-60-2M
3528
IP54
60
410lm
+
5 mtr
VPR9735IP54-60-5M
3528
IP54
60
+
10 mtr
VPR9735IP20-60-10M
3528
IP20
+
10 mtr
VPR9735IP54-60-10M
3528
IP54
IMAGE
14.4w 4000K LED Strip Lighting Kits IP LED PER LUMENS PER VOLTAGE RATING METRE METRE
LENGTH
PART NUMBER
SMD
+
2 mtr
VPR9785IP54-60-2M
2835
IP54
60
1260lm
12v DC
14.4w/m
28.8w
+
5 mtr
VPR9785IP54-60-5M
2835
IP54
60
1260lm
12v DC
14.4w/m
72w
POWER
TOTAL WATTAGE
IMAGE
4.8w 5500K LED Strip Lighting Kits IP LED PER LUMENS PER VOLTAGE RATING METRE METRE
LENGTH
PART NUMBER
SMD
+
2 mtr
VPR9734IP54-60-2M
3528
IP54
60
430lm
12v DC
4.8w/m
9.6w
+
5 mtr
VPR9734IP54-60-5M
3528
IP54
60
430lm
12v DC
4.8w/m
24w
+
10 mtr
VPR9734IP20-60-10M
3528
IP20
60
430lm
12v DC
4.8w/m
48w
+
10 mtr
VPR9734IP54-60-10M
3528
IP54
60
430lm
12v DC
4.8w/m
48w
POWER
DIMMABLE
IMAGE
14.4w 5500K LED Strip Lighting Kits IP LED PER LUMENS PER VOLTAGE RATING METRE METRE
LENGTH
PART NUMBER
SMD
+
2 mtr
VPR9784IP54-60-2M
2835
IP54
60
1320lm
12v DC
14.4w/m
28.8w
+
5 mtr
VPR9784IP54-60-5M
2835
IP54
60
1320lm
12v DC
14.4w/m
72w
IMAGE
HV9705-1003
All LED strip must be installed on an aluminium heat dissipating surface
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
356
Lighting by Havit Multi Colour RGB LED Strip Lighting • • • • •
LED flexible strip light Colours selected using Havit LED controllers Peel and stick backing for initial placement Beam angle 120 degrees All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003 or HV9705-1603)
See Pages 337-338 For Havit LED Profile Compatibility Chart
Image for illustration purposes only.
RGB Strip IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9750-IP20-30-RGB
5050
IP20
30
585lm
12v DC
7.2w/m
5m
100mm
10x2mm
HV9750-IP54-30-RGB
5050
IP54
30
585lm
12v DC
7.2w/m
5m
100mm
10x3mm
HV9750-IP67-30-RGB
5050
IP67
30
585lm
12v DC
7.2w/m
5m
100mm
12x6mm
Chasing Multicolour LED Strip Lighting IMAGE
PART NUMBER
SMD
HV9750-IP54-60-CHRGB
5050
IMAGE
357
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE IP54
60
585lm
PART NUMBER
DESCRIPTION
HV9102-SPI-16S+M16S
• • • • •
12v DC
8w/m
5m
50mm
10x2mm
POWER
For use with Havit chasing RGB strip. 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx
12v DC 108w 24v DC 216w
Input Voltage: 12v DC or 24v DC
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Strip Multi Colour RGBW & RGBC LED Strip Lighting • • • • •
LED flexible strip light Colours selected using Havit LED controllers Peel and stick backing for initial placement Beam angle 120 degrees All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003 or HV9705-1603)
IP20 INDOOR IMAGE
Image for illustration purposes only.
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER RATING METRE METRE METRE LENGTH INCREMENT WXH
PART NUMBER
SMD
HV9751-IP20-60-RGBC
5050
IP20
60
600lm
12v DC 14.4w/m
5m
50mm
12x2mm
HV9751-IP20-60-RGBW
5050
IP20
60
550lm
12v DC 14.4w/m
5m
50mm
12x2mm
IP54 WATER RESISTANT IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH INCREMENT RATING METRE METRE WXH METRE
PART NUMBER
SMD
HV9751-IP54-60-RGBC
5050
IP54
60
600lm
12v DC 14.4w/m
5m
50mm
12x3mm
HV9751-IP54-60-RGBW
5050
IP54
60
550lm
12v DC 14.4w/m
5m
50mm
12x3mm
IP67 WEATHERPROOF IMAGE
LED LUMENS WATTAGE MAX IP CUTTING SIZE PER PER VOLTAGE PER LENGTH RATING METRE INCREMENT WXH METRE METRE
PART NUMBER
SMD
HV9751-IP67-60-RGBC
5050
IP67
60
600lm
12v DC 14.4w/m
5m
50mm
14x6mm
HV9751-IP67-60-RGBW
5050
IP67
60
550lm
12v DC 14.4w/m
5m
50mm
14x6mm
See Pages 337-338 For Havit LED Profile Compatibility Chart All LED strip must be installed on an aluminium heat dissipating surface HV9705-1003
HV9705-1603
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
358
Lighting by Havit RGB LED Globe & Remote Control • • • • •
5w RGB LED Supplied with multi function IR remote 16 colours in one 21 colour change mode 30˚ Beam angle Φ49
Φ50
54mm 60mm
IMAGE
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV95021-12V
Multi Colour
NA
RGB, 5w LED 12v DC MR16
HV95021-240V
Multi Colour
NA
RGB, 5w LED 240v GU10
14
2w G9 LED Globes • Direct replacement for halogen G9 • 180˚ beam angle
IMAGE
33
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9511C
6000k
130lm
2w LED 240v G9
HV9511W
3000K
120lm
2w LED 240v G9
2w MR11 LED Globes
35
• Energy saving 2w LED globe • 120° beam angle
IMAGE
359
46
27
34
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9311
6000k
180lm
2w LED 12v DC MR11
HV9411
3000K
160lm
2w LED 12v DC MR11
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Globes
ø50
ø50 CW/NW/WW
Tri-Colour By Havit
CW/NW/WW
3000K
50
60
4000K 5500K
7W/5W/3W
Tri-Colour 9in1 LED Globe • • • • •
7W/5W/3W
NEW 9in1 Tri-Colour Globes 3 Power Settings 3W - 5W -7W
3w, 5w & 7w option all in one globe
Available in 240V 12V DC 24V DC
Tri-Colour + 3 Power settings 9in1 Ability to select 3000K, 4000K and 5500K 60˚ Beam angle
3 Colour Temperatures 3000K-4000K-5500K
Triac Dimmable (HV9506D Only) IMAGE
PART NUMBER
POWER 3W
HV9506D
5W 7W
IMAGE
PART NUMBER
POWER 3W
HV9507
5W 7W
IMAGE
PART NUMBER
POWER 3W
HV9508
5W 7W
COLOUR TEMP
LUMENS
INPUT
3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240lm 255lm 270lm 400lm 425lm 450lm 560lm 595lm 630lm
COLOUR TEMP
LUMENS
3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240lm 255lm 270lm 400lm 425lm 450lm 560lm 595lm 630lm
12v DC
COLOUR TEMP
LUMENS
INPUT
3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240lm 255lm 270lm 400lm 425lm 450lm 560lm 595lm 630lm
240v 240v 240v INPUT 12v DC
12v DC
24v DC 24v DC 24v DC
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
360
Lighting by Havit G4 High Output Bi Pin LED Globes • 1.4w, 1.5w, 3.2w & 5w SMD LED • Beam angle: 180˚
18
Ø13 23
22
9.4
42
42
35
34 11
1.4w
IMAGE
361
1.5w
1.5w
3.2w
3.2w
PART NUMBER
COLOUR TEMP.
OUTPUT
POWER
HV9523
5500K
110lm
1.4w LED 12v DC
HV9523-1.5W
5500K
110lm
1.5w LED 12v DC
HV9523-3.2W
5500K
260lm
3.2w LED 12v DC
HV9523-5W
5500K
400lm
5w LED 12v DC
HV9525
Red
NA
1.4w LED 12v DC
HV9526
Yellow
NA
1.4w LED 12v DC
HV9527
Green
NA
1.4w LED 12v DC
HV9528
Blue
NA
1.4w LED 12v DC
HV9529
3000K
90lm
1.4w LED 12v DC
HV9529-1.5W
3000K
90lm
1.5w LED 12v DC
HV9529-3.2W
3000K
240lm
3.2w LED 12v DC
HV9529-5W
3000K
360lm
5w LED 12v DC
5w
5w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
LED Globes 5w COB High Output LED Globes • 5w COB LED • Aluminium body • Beam angle: 60˚
Ø50
Ø50
51
45
56
IMAGE
IMAGE
53
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9555C
5500K
370lm
Dimmable 5w LED 240v GU10
HV9555C-4K
4000K
355lm
Dimmable 5w LED 240v GU10
HV9555W
3000K
340lm
Dimmable 5w LED 240v GU10
HV9555B
Blue
NA
Dimmable Blue, 5w LED 240v GU10
HV9555G
Green
NA
Dimmable Green, 5w LED 240v GU10
HV9555R
Red
NA
Dimmable Red, 5w LED 240v GU10
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9557C
5500K
370lm
5w LED 12v DC MR16
HV9557C-4K
4000K
355lm
5w LED 12v DC MR16
HV9557W
3000K
340lm
5w LED 12v DC MR16
HV9557B
Blue
NA
Blue, 5w LED 12v DC MR16
HV9557G
Green
NA
Green, 5w LED 12v DC MR16
HV9557R
Red
NA
Red, 5w LED 12v DC MR16
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
362
Lighting by Havit Bar Canopies by Havit • Surface mount weight limit: 2kg 500x50x40mm Rectangular Surface Mount Canopy
HV9705-5050-SCH
500x50x40mm Rectangular Surface Mount Canopy
HV9705-5050-WHT 500x50x40mm Rectangular Surface Mount Canopy
HV9705-5050-BLK 800x50x40mm Rectangular Surface Mount Canopy
HV9705-5080-SCH 800x50x40mm Rectangular Surface Mount Canopy
HV9705-5080-WHT 800x50x40mm Rectangular Surface Mount Canopy
HV9705-5080-BLK
363
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Canopies Canopies by Havit • Surface mount weight limit: 2kg • Recessed weight limit: 1kg • Recessed cut out: 90mm 70mm Round Surface Mount
70mm Round Surface Mount
70mm Round Surface Mount
HV9705-7023-BLK
HV9705-7023-SCH
HV9705-7023-WHT
100mm Round Surface Mount
100mm Round Surface Mount
100mm Round Surface Mount
HV9705-9025-BLK-RND
HV9705-9025-SCH-RND
HV9705-9025-WHT-RND
100x100mm Square Surface Mount
100x100mm Square Surface Mount
100x100mm Square Surface Mount
HV9705-9025-BLK-SQ
HV9705-9025-SCH-SQ
HV9705-9025-WHT-SQ
100mm Round Recessed 90mm cutout
100mm Round Recessed 90mm cutout
100mm Round Recessed 90mm cutout
HV9705-9005-BLK-RND
HV9705-9005-SCH-RND
HV9705-9005-WHT-RND
100x100mm Square Recessed 90mm cutout
100x100mm Square Recessed 90mm cutout
100x100mm Square Recessed 90mm cutout
HV9705-9005-BLK-SQ
HV9705-9005-SCH-SQ
HV9705-9005-WHT-SQ
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
364
Lighting by Havit Accessories IMAGE
PART NUMBER
DESCRIPTION
Replacement glass to
HV1437-TOP
HV350-SPK
85
400
HV1607
32
suit HV1437 & HV1438
• Optional garden spike to suit: HV1494C, HV1494W and HV1494RGB
• • • •
IP RATING
NA
NA
Bollard spike High grade stainless steel 400mm Length
NA
Includes stainless steel base plate
• Maintenance kit recommended for all HV9971
stainless steel luminaires
NA
• Kit will clean and protect
HV9911
HV9912
HV9913
365
• • • • •
Suitable Wires 22-10AWG / 0.3247-5.26 mm² Waterproof and corrosion proof-IP67. Pre-filled non hardening silicone gel Eliminates need for heat shrink, tape or sealants. • Can be used with 12v DC or 24v DC
• • • • •
Suitable Wires 22-8AWG / 0.3247-8.37 mm² Waterproof and corrosion proof-IP67. Pre-filled non hardening silicone gel Eliminates need for heat shrink, tape or sealants. • Can be used with 12v DC or 24v DC
• • • • •
Suitable Wires 22-6AWG / 0.3247-13.3 mm² Waterproof and corrosion proof-IP67. Pre-filled non hardening silicone gel Eliminates need for heat shrink, tape or sealants. • Can be used with 12v DC or 24v DC
IP67
IP67
IP67
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Accessories Accessories IMAGE
DESCRIPTION
HV9905
• •
Junction Box IP Rating: IP65
HV9930
• •
LED strip adaptor DC male connector to 2 pin
HV9931
• •
LED strip adaptor DC female connector to 2 pin
IP20
HV9933
• •
DC connector 2 metre extension Extend LED Drivers
IP20
• • • • • • • • •
1 into 4 Connector DC female to 4x DC male Extend LED Driver output 1 into 6 Connector DC female to 6x DC male Extend LED Driver output 1 into 8 Connector DC female to 8x DC male Extend LED Driver output
HV9941-5PK
•
Ezi Tail connector - 5 Pack
NA
HV9941-10PK
•
Ezi Tail connector - 10 Pack
NA
HV9705-9955
•
2 core low voltage suspension cable to suit HV9705-9956
NA
HV9705-9956
•
Suspension kit to suit HV9705-9955
NA
HV9981
•
Red & Black Low Voltage Cable - 1m
NA
HV9982
•
RGB Low Voltage Cable - 1m
NA
HV9983
•
RGBC / W Low Voltage Cable - 1m
NA
HV9984
•
2 Core Clear Low Voltage Cable - 1m
NA
HV9985
•
3 Core Clear Cable - 1m
NA
HV9985-BLK
•
3 Core Black Cable - 1m
NA
HV9985-WHT
•
3 Core White Cable - 1m
NA
HV9986
•
3 Core Low Voltage CT Cable
NA
HV9934 HV9936 HV9938
x5 x10
73mm
PART NUMBER
18
IP RATING
83mm
73mm
18
38mm
38mm
26mm
IP65
83mm
26mm
IP20
IP20 IP20 IP20
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
366
Lighting by Havit IP (INGRESS PROTECTION) RATINGS GUIDE WATER
SOLIDS Protected against a solid object greater than 50mm, such as a hand
1
Protected against vertically falling drops of water. Limited ingress permitted
1
2
Protected against vertically falling drops of water with o enclosure tilted 15 from vertical. Limited ingress permitted
2
3
Protected against sprays o to 60 from the vertical. Limited ingress permitted
3
4
Protected against water splashed from all directions. Limited ingress permitted
4
Dust protected. Limited ingress of dust permitted
5
Protected against jets of water. Limited ingress permitted
5
Dust Tight. Zero ingress of dust permitted
6
Protected against strong jets of water. Limited ingress permitted
6
Protected against the effects of immersion between 15cm and 1m for up to 1hr
7
Protected against long periods of immersion under pressure
8
Protected against a solid object greater than 12.5mm, such as a finger Protected against a solid object greater than 2.5mm, such as a screwdriver Protected against a solid object greater than 1.0mm, such as a wire
IP 67
INGRESS PROTECTION
Chart for reference only. Please refer to AS60529. Diagrams used to illustrate the IP Rating do not have any relation to standards or the IP Rating system and should only be used as a guide.
367
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Lighting By Havit IK RATINGS GUIDE IK Ratings is the measurement of an object being dropped or fallen onto a fitting from a certain distance and up to a certain weight without the glass breaking.
IK CODE
00
No Protection
01
Protected against impact of object with weight of up to 0.25kg mass dropped from 56mm above the impacted surface.
02
Protected against impact of object with weight of up to 0.25kg mass dropped from 80mm above the impacted surface.
03
Protected against impact of object with weight of up to 0.2kg mass dropped from 140mm above the impacted surface.
04
Protected against impact of object with weight of up to 0.25kg mass dropped from 200mm above the impacted surface.
05
Protected against impact of object with weight of up to 0.25kg mass dropped from 280mm above the impacted surface.
06
Protected against impact of object with weight of up to 0.25kg mass dropped from 400mm above the impacted surface.
07
Protected against impact of object with weight of up to 0.5kg mass dropped from 400mm above the impacted surface.
08
Protected against impact of object with weight of up to 1.7kg mass dropped from 300mm above the impacted surface.
09
Protected against impact of object with weight of up to 5kg mass dropped from 200mm above the impacted surface.
10
Protected against impact of object with weight of up to 5kg mass dropped from 400mm above the impacted surface.
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
368
Lighting by Havit Warranty Terms & Conditions 2 Years LIMITED REPLACEMENT WARRANTY
signals are available in Australia at the customer’s expense. These noises do not indicate the product is faulty.
1. Warranty Period HAVIT LIGHTING offers a 2 YEARS limited replacement warranty on products that fail due to defective materials or workmanship. The warranty period begins from the date of purchase.
• Damage caused by alternative power systems (for example: solar inverters, etc.).
2. Warranty Terms and Conditions The warranty period starts on the date the goods are purchased from an authorised Havit Lighting retailer. All fittings must be installed by a licensed electrician, as required by law. The product must only be used in accordance with Havit Lighting specifications, guidelines and instructions.
• The cost of renting, obtaining and using special access equipment (i.e. scaffoldings, scissor lifts, etc.) for accessing products installed at a height of greater than 3.0 metres.
3. Limited Warranty The warranty as described only applies to Havit Lighting products. The warranty is only applicable to the party purchasing the products. Havit Lighting warrants that each product will be free from defects in material and workmanship. If a replacement is required under warranty, proof of purchase (such as the original dated purchase receipt) from an authorised HAVIT LIGHTING retailer is required to make a warranty claim. Proof of installation for products installed by a licensed electrician is also required for replacement under warranty. 4. Balance of Warranty To the maximum extent permitted by law, any replaced products by HAVIT LIGHTING are covered only by the balance of the warranty period remaining from the date of purchase of the original HAVIT LIGHTING product. 5. Limited Replacement Warranty In addition to the limited warranty terms set out under section (3), the following will apply. Where a consumer asserts that a product installed is faulty, and a HAVIT LIGHTING service agent has attended the property, A SERVICE CALL FEE WILL BE CHARGED TO THE CONSUMER IF: • The product is not a HAVIT LIGHTING product. • There is nothing wrong with the product or to the extent that the failure is not a failure of the product to perform in accordance with its published features and specifications as reasonably determined by HAVIT LIGHTING. • The original installation of the product was not carried out by a licensed electrician. • The installation is not performed in accordance with the relevant HAVIT LIGHTING product installation instructions.
• Water damage of any kind caused by inappropriate placement of fittings not IP rated for that location.
• Travelling costs incurred by HAVIT LIGHTING personnel or service agents travelling greater than 25km from an authorised service agent. • Non-structural corrosion damage of non-316 Stainless Steel components such as surface rust or minor rust. • Corrosion to any aluminium product that has been installed within 2km of a salty environment. 7. Commercial Use The warranty period for HAVIT LIGHTING products designated as Commercial use is specified in the instruction leaflet supplied with the light fitting. All other HAVIT LIGHTING products are designed for domestic use. Where products designed for domestic use are used in a commercial environment/commercial premises one third of the domestic warranty (8-month warranty) applies. Commercial use means that the products can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise, the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. 8. Making a Warranty Claim For limited replacement warranty: Please return the faulty HAVIT LIGHTING product together with a copy of the proof of purchase and a proof of installation as required by law from the electrician. To the maximum extent permitted by law, the customer must bear the costs and expenses of claiming under this warranty, including but not limited to the cost incurred in freight, postage, handling, travel, dismantling or reinstalling the product.
• The defects have been caused by incorrect application, abuse or misuse by the consumer.
All Havit Lighting products are supplied with a limited 2-year replacement warranty. Conditions set out below must be adhered to for this warranty to apply. Each item must be installed by a licensed electrician and used in the conditions set out below.
6. Limitations and Conditions This is a limited warranty and excludes, among other items, installation, incidental and consequential damages, other extended costs and is further defined by the limitation and conditions set out below. Subject to Consumer Rights, but otherwise to the maximum extent permitted by law, the HAVIT LIGHTING warranties provided in this document will not cover the following:
LED Strip Must be installed on an aluminium heat sink or aluminium profile. Must be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise, the following warranties will apply:
• Products that are not purchased from an authorised reseller and not installed in Australia.Products where installation was not carried out by a licensed electrician as required. • Products not installed in accordance with the product’s installation instructions or specifications. • Products not used in accordance with the instructions for use or specifications. • Defect, damage or failure to a product resulting from misuse, accident, neglect, abuse, tampering, modifications or unauthorised repairs being carried out. • Damages not caused by a fault in the product materials or workmanship. • Defect, damage or failure to a product resulting from any acts of God, including damages from lightning, power grid fluctuations, or power surges. • Replacement of light sources unless specified.
• 12-24hrs of continuous usage, 12 months warranty will apply. Can only be used with maximum continuous run specified in catalogue. Must be operated in temperatures of 0° to 50°. Must be installed as per installation instructions supplied with LED strip (if not supplied these instructions can be obtained through the Havit Lighting website or by contacting Havit Lighting sales dept.), including using static bands and applied to cleaned surfaces. LED Drivers Must be well ventilated with min ambient operating temp to be at 2° and max ambient operating temp at 50°. Humidity to be no greater than 55%. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12 hrs per day for 2 Years warranty to apply. Otherwise, the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply.
• Replacement of batteries supplied with certain products. • Power supply “noise”, intermittent “humming” or other influences from mains power delivery infrastructure. Signals sent through the power grid by the electricity provider for the control of off-peak hot water, street lights and other devices may cause an intermittent humming noise in your product. Filters for blocking/reducing such
369
• 8-12hrs of continuous usage, 18 months warranty will apply.
• 12-24hrs of continuous usage, 12 months warranty will apply. Voltage supply must be within range of 220V – 240V ± 2%. Drivers are not covered by the effect of off-peak power supply from electrical supply companies.
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Lighting By Havit
Aluminium Profile Must not be used in applications where supplied structure of profile is manipulated causing fatigue to profile and failure to create correct heat sink factors as well as diffuser seating. All cuts are precise to Havit Lighting measuring equipment but lengths inside of measurements supplied within 5% are considered within acceptable variable limitations and will not be recut. Custom Cut lengths will have allowance for installation of end caps, EG 2000mm will be cut at 1995mm. LED Strip Controllers Must be well ventilated. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Must be operated between temperatures of 0° to 50°. LED Downlights Must be well ventilated. Must be used with supplied cables. No alterations are permitted including extension of leads from power to driver and/ or leads from driver to light fitting, otherwise warranty is void. Must be installed with flex and plug supplied. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. PROLINE Pendants Must be used with supplied cables. No alterations are permitted including extension of leads from power to driver, otherwise warranty is void. Run cannot exceed more than 24m. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. GARDEN Lights Must be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. No more than 25m from driver to last fittings installed in 1 continuous run to avoid any voltage drop. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. OUTDOOR Wall Lighting Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Low Voltage models must also be used with correct 12v DC Power supply with allowance of 30% from maximum load of LED Driver and installed No more than 25m from driver to last fittings in 1 continuous run to avoid any voltage drop. OUTDOOR Step Lighting Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply:
OUTDOOR Bollard Lights Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Low Voltage models must also be used with correct 12v DC Power supply with allowance of 30% from maximum load of LED Driver and installed No more than 25m from driver to last fittings in 1 continuous run to avoid any voltage drop.
INGROUND Lights Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Must also be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. Must have adequate drainage as outlined in installation instructions. Cannot exceed maximum run of 25m from LED driver to last fitting. DECK Lights Must be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. No more than 25m from driver to last fittings installed in 1 continuous run to avoid any voltage drop. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. LED Flood Lights Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Must be used with supplied cables. No alterations are permitted including extension of leads from power to driver, otherwise warranty is void. INDOOR Wall Lighting Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. LED Globes Low Voltage models must be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. No more than 25m from driver to last fittings installed in 1 continuous run to avoid any voltage drop. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 2 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply.
• 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Low Voltage models must also be used with correct 12v DC Power supply with allowance of 30% from maximum load of LED Driver and installed No more than 25m from driver to last fittings in 1 continuous run to avoid any voltage drop.
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
2013 www.havit.com.au
370
Lighting by Havit Recommended Routine Maintenance For Stainless Steel Luminaires
Stainless Steel features as the main exterior metal of many luminaires. Many of us recognise that stainless steel is intrinsically attractive, but these fittings require maintenance like all others. Stainless steel enjoys a strong and enduring reputation for long term appearance and structural integrity. But like all materials stainless steel may become stained or discoloured over time, impairing the overall look. This brown discolouration is referred to as “tea staining”. Tea staining can be defined as discolouration of the surface to stainless steel that does not affect the structural integrity or the longevity of the material.
Environmental Factors
Tea staining occurs most commonly within about five kilometres of the sea and becomes progressively worse closer to the marine source. However, wind exposure, pollution levels and higher temperatures can create environments where tea staining might occur 20 kilometres or more from the nearest body of seawater. Swimming pool surrounds must also be treated in the same manner, particularly indoor pools. These same factors also increase corrosion rates of alternative materials.
Surface Finish
Rough surface finishes promote tea staining; the smoother the surface, the better. Smoother surface finishes stay cleaner between washes and don’t have deep surface grooves where chlorides (salts) and other contaminants can collect and cause staining. Even smooth stainless steel finishes in coastal environments may show tea staining if not washed regularly.
Selecting Stainless Steel Luminaires
Care in the selection of luminaires for any application will avoid problems and disappointment. Some considerations for selection include: Appropriate Grade Selection. Exposure of a particular grade of stainless steel to a more aggressive environment than it can resist will contribute to tea staining. Grade 316 should be selected as a minimum within five kilometres of the sea. The less expensive grades (such as 304 or 202) will probably become tea stained or even suffer more severe corrosion.
Prevention – Perform Regular Maintenance
Protecting Stainless Steel from corrosion no longer needs to be a chore as there is now a unique treatment containing Nanolon which provides protection for months on end. The Stainless Steel solution is a two part rejuvenation and protection treatment providing long lasting protection to all grades of Stainless Steel. Ideal for the removal and protection of corrosion and ‘tea staining’ on all grades of internal and external stainless steel.
STEP 1
Using Stainless Steel Rejuvenating Paste - the non abrasive formula not only cleans, removes contaminates and rejuvenates the surface, it also pre conditions stainless steel for the protective treatment of (Step 2) Stainless Steel Sentry – the formulation is pH balanced in order to counter any acidic corrosive residues remaining from previous cleaning products and contaminates. The ph balancing aids in the protection of further ‘tea staining’ and corrosion.
STEP 2
Using Stainless Steel Sentry - for all grades of marine and architectural, internal and external stainless steel. Containing the ultra protection concentrate NANOLON. The NANOLON concentrate when applied to the preconditioned stainless steel microscopically coats it and protects it for several months depending on the conditions. The NANOLON concentrate protects stainless steel from atmospheric corrosion which causes unsightly ‘tea staining’ and rusting. This product is designed to be used only in conjunction with Stainless Steel Rejuvenating Paste. We recommend the use of this product on all Stainless Steel Luminaries displayed in this catalogue.
371
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Lighting By Havit
Architectural Copper Oxidation Why does copper turn green?
When used outdoors and exposed to the elements, copper transforms from a bright, shiny new penny shade, to a burnished brown, and finally to a distinct green colour. It is this particular effect that attracts architects and designers to use copper. This green finish can most famously be seen on the Statue of Liberty and is seen across many cities on old and new buildings. This unique characteristic of copper is completely natural and is often referred to as the “patina” – which refers to the way copper changes colour and turns green as it ages. This natural process actually preserves the copper and protects it from the outside elements making it an excellent choice for exterior lighting. Over time copper will naturally change colours – transforming from a shiny brown colour to darker browns, then blues and finally greens after a period of time dependant on fittings location and exposure to the natural elements such as wind and rain. Copper develops this “patina” which protects and preserves the metal underneath.
Natural Oxidation
In the same way rust develops on iron, patina develops on copper when the copper sulphate on the surface interacts with oxygen in the environment. Importantly, unlike rust which corrodes iron, patina actually protects and preserves the copper underneath.
Copper Care
The patina process of copper is completely natural and one of the big draws for people who like its look. However, some people prefer the newer look of copper and this can be restored with the help of readily available cleaning products and a little “elbow grease.” Buffing is a big part of the cleaning process. There are also many commercial products as well as homemade remedies, including those made with vinegar and lemon juice. You should always start by washing the copper with warm water and gentle soap. Avoid using abrasive cleansers or cloths, as they may scratch the copper.
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
372
Lighting by Havit Notes & Updates
373
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Lighting By Havit Notes & Updates
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
374
Lighting by Havit Notes & Updates
375
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
Lighting by By Havit Notes & Updates
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 275 - 282 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 362
www.havit.com.au
376
havit.com.au
Lig By htin Ha g vit
20 21