2022 Lighting By Havit @HavitLighting
@LightingbyHavit
@HavitLighting
Lighting
Tel: 02 9381 8300 Fax: 02 9666 8881 Email: sales@havit.com.au web: www.havit.com.au Address: 143 Beauchamp Road Matraville NSW 2036 Australia Postal: PO Box 787 Matraville NSW 2036 Australia
All images and information in this publication are a guide to the displayed product and should be checked with at www.havit.com.au prior to purchase. Information is subject to change without notification at the discretion of Havit Lighting. For further information please contact the team at Havit Lighting. Some fittings within the Havit Lighting catalogue are supplied with complimentary globes. Although Havit Lighting will make every effort to supply the globe shown, another globe may be supplied if models change or a globe is not available. For information about our warranty visit: www.havit.com.au
Lighting
Havit Lighting Catalogue 2022 Issue No. 20 @HavitLighting
@LightingbyHavit
@HavitLighting
TABLE OF CONTENTS PREMIUM WALL LIGHTS
PREMIUM WALL LIGHTS (CONTINUED)
GARDEN LIGHTS
PAGES 1-16
PAGES 17-28
PAGES 29-54
POND LIGHTS
OUTDOOR BOLLARDS
IN-GROUND & STEP LIGHTS
PAGE 55-56
PAGES 57-72
PAGES 73-94
DECK LIGHTS
STEP LIGHTS & BRICK LIGHTS
STEP LIGHTS (CONTINUED)
PAGES 95-104
PAGES 105-126
PAGES 127-160
WALL LIGHTS
WALL LIGHTS (CONTINUED)
BUNKER & FLOOD LIGHTS
PAGE 161-190
PAGES 191-216
PAGES 217-224
LED SPOT LIGHTS & SENSOR SPOT LIGHTS
2/3/4 HEAD SPOT LIGHTS
PREMIUM DOWNLIGHTS
PAGES 225-228
PAGES 229-238
PAGES 239-250
SURFACE MOUNTED DOWNLIGHTS & PENDANTS
NELLA & PROLINE PENDANTS
INDOOR WALL LIGHTS
PAGES 251-274
PAGES 275-278
PAGES 279-284
RGBW
+3000K
TABLE OF CONTENTS IP66 LED DRIVERS
TRIAC DIMMABLE LED DRIVERS
PAGES 285-314
PAGES 315-316
PAGES 317-320
0-1/10V & DALI DIMMABLE LED DRIVERS
CONSTANT VOLTAGE LED DRIVERS
LED PROFILE INDEX
LED STRIP CONTROL EQUIPMENT WIFI-104 App
LED Profile by Havit Quick Reference
PAGES 321
PAGES 323-324
PAGES 325-326
LED ALUMINIUM PROFILE
LED STRIP
VIPER LED STRIP KITS
PAGES 327-377
PAGES 379-410
PAGES 411-416
LED & TRI-COLOUR GLOBES
CANOPIES
ACCESSORIES
PAGES 417-420
PAGES 421-422
PAGES 423-424
INFORMATION
WARRANTY & MAINTENANCE
NOTES & UPDATES
Warranty Terms & Conditions Stainless Steel Maintenance Copper Care
Lighting by Havit
PAGES 427-430
PAGES 431-434
Tri-Colour By Havit 3000K 4000K 5500K
IP & IK RATING CHART by Havit INGRESS PROTECTION GUIDE IK RATINGS EXPLAINED
PAGES 425-426
Lighting By Havit
2022
@HavitLighting @LightingbyHavit @HavitLighting
2022 • Lighting By Havit
85
85
Ø68 110
21 Ø68
125
210
Ø60 22
Fixed Down
Ø60
Up & Down
Tivah 316 Stainless Steel • • • •
Stainless Steel 316 Marine Grade Includes a matching stainless steel backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
PART NUMBER HV1005T HV1007GU10T HV1007MR16T
IMAGE
PART NUMBER HV1105T HV1107GU10T HV1107MR16T
IP65
INDOOR/OUTDOOR WEATHERPROOF
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
1
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
175
Ø68
22
110
Double Adjustable
Ø60
Ø100 20
90º Tilt / 270º Swivel 90
90
90
175 110
Tri-Colour Tri-Colour By By Havit Havit
Ø60
3000K 3000K
135
Ø60
4000K 4000K 5500K 5500K
90º Tilt / 270º Swivel
IMAGE
PART NUMBER HV1205T HV1207GU10T HV1207MR16T
IMAGE
PART NUMBER HV1305T HV1307GU10T HV1307MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
2
2022 • Lighting By Havit
85 85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Solid Copper • • • • •
Solid Copper body Fast weathering for classic aged appearance Includes a matching backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
PART NUMBER HV1015T HV1017GU10T HV1017MR16T
IMAGE
PART NUMBER HV1115T HV1117GU10T HV1117MR16T
Tri-Colour Tri-Colour By By Havit Havit 3000K 3000K
IP65
INDOOR/OUTDOOR WEATHERPROOF
4000K 4000K 5500K 5500K
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
3
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
22
110
Double Adjustable
Ø60
Ø100 20 90
90
90
175 110
Ø60
Weathered Copper IMAGE
Ø60
90º Tilt / 270º Swivel
PART NUMBER HV1215T HV1217GU10T HV1217MR16T
IMAGE
135
PART NUMBER HV1315T HV1317GU10T HV1317MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
4
2022 • Lighting By Havit
85
85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Aluminium Black • • • •
Aluminium Poly Powder Coated Black Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
PART NUMBER HV1025T HV1027GU10T HV1027MR16T
IMAGE
PART NUMBER HV1125T HV1127GU10T HV1127MR16T
IP65
INDOOR/OUTDOOR WEATHERPROOF
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
5
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
22
110
Double Adjustable
Ø60
Ø100 20 90
90
90
175 110
Tri-Colour Tri-Colour By By Havit Havit
Ø60
3000K 3000K
135
Ø60
4000K 4000K 5500K 5500K
90º Tilt / 270º Swivel
IMAGE
PART NUMBER HV1225T HV1227GU10T HV1227MR16T
IMAGE
PART NUMBER HV1325T HV1327GU10T HV1327MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
6
2022 • Lighting By Havit
85
85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Aluminium White • • • •
Aluminium Poly Powder Coated White Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
PART NUMBER HV1035T HV1037GU10T HV1037MR16T
IMAGE
PART NUMBER HV1135T HV1137GU10T HV1137MR16T
IP65
INDOOR/OUTDOOR WEATHERPROOF
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
7
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
22
110
Double Adjustable
Ø60
Ø100 20 90
90
90
175 110
Tri-Colour Tri-Colour By By Havit Havit
Ø60
3000K 3000K
135
Ø60
4000K 4000K 5500K 5500K
90º Tilt / 270º Swivel
IMAGE
PART NUMBER HV1235T HV1237GU10T HV1237MR16T
IMAGE
PART NUMBER HV1335T HV1337GU10T HV1337MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
8
2022 • Lighting By Havit
85
85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Aluminium Silver • • • •
Aluminium Poly Powder Coated Silver Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
PART NUMBER HV1045T HV1047GU10T HV1047MR16T
IMAGE
PART NUMBER HV1145T HV1147GU10T HV1147MR16T
IP65
INDOOR/OUTDOOR WEATHERPROOF
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
9
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
22
110
Double Adjustable
Ø60
Ø100 20 90
90
90
175 110
Tri-Colour Tri-Colour By By Havit Havit
Ø60
3000K 3000K
135
Ø60
4000K 4000K 5500K 5500K
90º Tilt / 270º Swivel
IMAGE
PART NUMBER HV1245T HV1247GU10T HV1247MR16T
IMAGE
PART NUMBER HV1345T HV1347GU10T HV1347MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
10
2022 • Lighting By Havit
85
85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Solid Brass Graphite • • • •
Graphite Coloured Solid Brass Includes a matching brass backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
Tri-Colour Tri-Colour By By Havit Havit 3000K 3000K 4000K 4000K 5500K 5500K
PART NUMBER HV1075T HV1077GU10T HV1077MR16T
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER HV1175T HV1177GU10T HV1177MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
11
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
22
110
Double Adjustable
Ø60
Ø100 20 90
90
90
175 110
i
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
IMAGE
Ø60
Ø60
90º Tilt / 270º Swivel
PART NUMBER HV1275T HV1277GU10T HV1277MR16T
IMAGE
135
PART NUMBER HV1375T HV1377GU10T HV1377MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
12
2022 • Lighting By Havit
85
85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Aluminium Titanium • • • •
Titanium Coloured Aluminium Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
PART NUMBER HV1085T HV1087GU10T HV1087MR16T
IMAGE
PART NUMBER HV1185T HV1187GU10T HV1187MR16T
IP65
INDOOR/OUTDOOR WEATHERPROOF
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
13
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
22
110
Double Adjustable
Ø60
Ø100 20 90
90
90
175 110
Tri-Colour Tri-Colour By By Havit Havit
Ø60
3000K 3000K
135
Ø60
4000K 4000K 5500K 5500K
90º Tilt / 270º Swivel
IMAGE
PART NUMBER HV1285T HV1287GU10T HV1287MR16T
IMAGE
PART NUMBER HV1385T HV1387GU10T HV1387MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
14
2022 • Lighting By Havit
85
85
Ø68
110
22
Ø68
125
210 Ø60
22
Fixed Down
Ø60
Up & Down
Tivah Antique Brass • • • •
Solid Brass With Antique Brass Finish Includes a matching brass backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
Tri-Colour Tri-Colour By By Havit Havit 3000K 3000K 4000K 4000K 5500K 5500K
PART NUMBER HV1095T HV1097GU10T HV1097MR16T
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER HV1195T HV1197GU10T HV1197MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
15
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
175 90º Tilt / 270º Swivel Ø68
22
110
Double Adjustable
Ø60
Ø100 20 90
90
90
175 110
i
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
IMAGE
Ø60
Ø60
90º Tilt / 270º Swivel
PART NUMBER HV1295T HV1297GU10T HV1297MR16T
IMAGE
135
PART NUMBER HV1395T HV1397GU10T HV1397MR16T
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240-560lm 255-595lm 270-630lm 270lm 285lm 300lm 270lm 285lm 300lm
COLOUR TEMP LUMENS 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
2x 240-560lm 2x 255-595lm 2x 270-630lm 2x 270lm 2x 285lm 2x 300lm 2x 270lm 2x 285lm 2x 300lm
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 3/5/7w GU10 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
INPUT
INCLUDED LED
240v
9 in 1 Tri-Colour 2x 3/5/7w GU10 LED
240v
Tri-Colour 2x 5w GU10 LED
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
16
2022 • Lighting By Havit 90 90
75 151
75
232
60 * Base width 46mm
Fixed Down 60 * Base width 46mm
Up & Down
Single Adjustable 193
90º Tilt / 270º Swivel
75
60
123
27 * Base width 46mm
Piaz Stainless Steel
90
IP54
• High Grade 304 Stainless Steel • IP Rating: IP54 IMAGE
IMAGE
IMAGE
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1071T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1171T
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1271T
3000K 4000K 5500K
270lm 285lm 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 5w GU10 LED INCLUDED LED Tri-Colour 5w GU10 LED
HAVIT COMPATIBLE ACCESSORIES Compatible with Tri-Colour 9in1 Globes
17
HV9506D
3000K 4000K 5500K
240lm-630lm
240v
Tri-Colour 3W/5W/7W GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
85
263
Ø68
22
Ø60
Titanium Aluminium
Black Aluminium
Highlite Aluminium • Titanium Coloured Aluminium and Aluminium Poly Powder Coated Black
• Includes a matching aluminium backing plate • High grade perspex reflector lens • IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
4000K 5500K
Suitable for use with LED globes only
IMAGE
Tri-Colour By Havit 3000K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1089T-TTM-240V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1089T-BLK-240V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED
Tri-Colour 2x 5w GU10 LED
INCLUDED LED
Tri-Colour 2x 5w GU10 LED
HAVIT COMPATIBLE ACCESSORIES Compatible with Tri-Colour 9in1 Globes
HV9506D
3000K 4000K 5500K
240lm-630lm
240v
Tri-Colour 3W/5W/7W GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
18
2022 • Lighting By Havit
84
84 Ø73
126 110
210
Ø73
20
Ø60
Fixed Down 20
Ø60
Up & Down
Fortis Stainless Steel
IP54
• High Grade 304 Stainless Steel • IP Rating: IP54 IMAGE
IMAGE
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1072T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1172T
3000K 4000K 5500K
270lm 285lm 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 5w GU10 LED
HAVIT COMPATIBLE ACCESSORIES Compatible with Tri-Colour 9in1 Globes
19
HV9506D
3000K 4000K 5500K
240lm-630lm
240v
Tri-Colour 3W/5W/7W GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Single Adjustable
110
90
20 Ø73
Ø60
Double Adjustable
174
90º Tilt / 270º Swivel
Ø100 21
90
90 175 110
Ø60
Ø60 135
90º Tilt / 270º Swivel
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1272T
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1372T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED Tri-Colour 5w GU10 LED INCLUDED LED Tri-Colour 2x 5w GU10 LED
HAVIT COMPATIBLE ACCESSORIES Compatible with Tri-Colour 9in1 Globes
HV9506D
3000K 4000K 5500K
240lm-630lm
240v
Tri-Colour 3W/5W/7W GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
20
2022 • Lighting By Havit
65
Ø40
Ø60
60
85
22
Ø60
135
Ø40
22
Mini Fixed Down 65
Mini Up & Down
Tivah Mini 316 Stainless Steel • • • •
316 Stainless Steel Includes a matching backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1007MR11NW
3000K + 4000K
2x 270lm + 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1107MR11NW
3000K + 4000K
270lm + 300lm
12v DC
INCLUDED LED
2x 3w 3000k MR11 LED + 2x 3w 4000k MR11 LED
INCLUDED LED
3w 3000k MR11 LED + 3w 4000k MR11 LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
21
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Mini Single Adjustable
130
Mini Double Adjustable Ø60
Ø40
Ø78
70
22
22 90°Tilt / 270° Swivel
90
90
133 70
Ø40
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
85
Ø40
90º Tilt / 270º Swivel
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1207MR11NW
3000K + 4000K
270lm + 300lm
12v DC
3w 3000k MR11 LED + 3w 4000k MR11 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1307MR11NW
3000K + 4000K
2x 270lm + 2x 300lm
12v DC
2x 3w 3000k MR11 LED + 2x 3w 4000k MR11 LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
22
2022 • Lighting By Havit
65 Ø40
Ø60
60
85
22
135
Ø60
Ø40
22
Mini Fixed Down 65
Mini Up & Down
Tivah Mini Aluminium Black • • • •
Aluminium Poly Powder Coated Black Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1027MR11NW
3000K 4000K
2x 270lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1127MR11NW
3000K 4000K
270lm 300lm
12v DC
INCLUDED LED
2x 3w 3000k MR11 LED + 2x 3w 4000k MR11 LED
INCLUDED LED
3w 3000k MR11 LED + 3w 4000k MR11 LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
23
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
Mini Single Adjustable
130
Mini Double Adjustable Ø60
Ø40
Ø78 70
22
22 90°Tilt / 270° Swivel
90
90
133 70
Ø40
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
85
Ø40
90º Tilt / 270º Swivel
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1227MR11NW
3000K 4000K
270lm 300lm
12v DC
3w 3000k MR11 LED + 3w 4000k MR11 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1327MR11NW
3000K 4000K
2x 270lm 2x 300lm
12v DC
2x 3w 3000k MR11 LED + 2x 3w 4000k MR11 LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
24
2022 • Lighting By Havit
Tivah Maxi 316 Stainless Steel • • • •
IMAGE
IMAGE
IMAGE
25
IP65
316 Stainless Steel Includes a matching backing plate High output reflector to maximise light IP Rating: IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1008T
3000K 4000K 5500K
240v
Tri-Colour Built-in 2x 12w LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1108T
3000K 4000K 5500K
240v
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1208T
3000K 4000K 5500K
240v
2x 1080lm 2x 1140lm 2x 1200lm
1080lm 1140lm 1200lm
1080lm 1140lm 1200lm
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
113
Ø85
250
28
Ø75
Maxi Up & Down
Maxi Single Adjustable Maxi Fixed Down
90º Tilt / 270º Swivel
113
Ø85
Ø75
Ø85
136
150
136
28
218
28
Ø75
90
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
26
2022 • Lighting By Havit
Tivah Maxi Aluminium Black • • • •
Aluminium Poly Powder Coated Black Includes a matching aluminium backing plate High output reflector to maximise light IP Rating: IP65 IMAGE
IMAGE
IMAGE
27
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1028T
3000K 4000K 5500K
240v
Tri-Colour Built-in 2x 12w LED
PART NUMBER
COLOUR TEMP LUMENS
INPUT
INCLUDED LED
HV1128T
3000K 4000K 5500K
240v
PART NUMBER
COLOUR TEMP LUMENS
INPUT
HV1228T
3000K 4000K 5500K
240v
2x 1080lm 2x 1140lm 2x 1200lm
1080lm 1140lm 1200lm
1080lm 1140lm 1200lm
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Spot Lights
113
Ø85
250
28
Ø75
Maxi Up & Down
Maxi Single Adjustable Maxi Fixed Down
90º Tilt / 270º Swivel
113
Ø85
Ø75
Ø85
136
150
136
28
218
28
Ø75
90
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
28
2022 • Lighting By Havit
Pointe 316 Stainless Steel • Single adjustable spike spotlight • Stainless Steel 316 Marine Grade and
316 Stainless Steel Poly Powder Coated Black
• 2x 235mm spike length (total 470mm) • 2m reinforced cable • IP Rating: IP65 Ø63 86
90°Tilt
235 600
IP65
INDOOR/OUTDOOR WEATHERPROOF
235 Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1401T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HV1401T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
29
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights
Eden 316 Stainless Steel • • • • •
Single adjustable spike spotlight Stainless Steel 316 Marine Grade 245mm spike length 2m reinforced cable IP Rating: IP65
90
63 111
155
90º Tilt / 270º Swivel 400
IP65
245
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1402T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
30
2022 • Lighting By Havit
Tivah 316 Stainless Steel • • • • • •
Adjustable spike spotlight Stainless Steel 316 Marine Grade Internal cable 405mm & 1000mm spike length 2m reinforced cable IP Rating: IP65 IMAGE
IMAGE
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1403T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1405T-SS316
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1407T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
Tri-Colour 2x 5w MR16 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
31
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights 180 60
90
110
220
90º Tilt / 270º Swivel
405 185
180 110
600
90
60
90º Tilt / 270º Swivel
1000
400
340
90
90
60 110
600
90º Tilt / 270º Swivel
1000
400
HV1407T-SS316 Single Adjustable
HV1403T-SS316 Single Adjustable
HV1405T-SS316 Double Adjustable
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
32
2022 • Lighting By Havit
Tivah Solid Copper • • • • • • •
Adjustable spike spotlight Solid Copper Fast weathering for classic aged appearance Internal cable 405mm & 1000mm spike length 2m reinforced cable IP Rating: IP65 IMAGE
IMAGE
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
Weathered Copper
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1403T-CP
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1405T-CP
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1413T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
Tri-Colour 2x 5w MR16 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
33
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights 180 60
90
110
220
90º Tilt / 270º Swivel
405 185
180 110
600
90
60
90º Tilt / 270º Swivel
1000
400
340
90
90
60 110
600
90º Tilt / 270º Swivel
1000
400
HV1413T Single Adjustable
HV1403T-CP Single Adjustable
HV1405T-CP Double Adjustable
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
34
2022 • Lighting By Havit
IP65
Tivah Antique Brass • • • • • •
INDOOR/OUTDOOR WEATHERPROOF
Adjustable spike spotlight Solid Brass With Antique Brass Finish Internal cable 405mm & 1000mm spike length 2m reinforced cable IP Rating: IP65 IMAGE
IMAGE
IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
i
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1403T-AB
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1405T-AB
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1407T-AB
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
Tri-Colour 2x 5w MR16 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
35
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights 180 60
90
110
220
90º Tilt / 270º Swivel
405 185
180 110
600
90
60
90º Tilt / 270º Swivel
1000
400
340
90
90
60 110
600
90º Tilt / 270º Swivel
1000
400
HV1407T-AB Single Adjustable
HV1403T-AB Single Adjustable
HV1405T-AB Double Adjustable
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
36
2022 • Lighting By Havit
Fortis Stainless Steel • • • • •
S ingle adjustable spike spotlight High Grade 304 Stainless Steel 285mm spike length 2m reinforced cable IP Rating: IP54
90º Tilt / 270º Swivel
Ø60
110 90
394
IP54
285
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1409T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
37
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights
Eden Copper • • • • • •
S ingle adjustable spike spotlight Solid Copper Fast weathering for classic aged appearance Spike length: 245mm 2m reinforced cable IP Rating: IP65
90
63 111
Weathered Copper
155
90º Tilt / 270º Swivel 400
IP65
245
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1412T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
38
2022 • Lighting By Havit Pointe Aluminium Black • • • • •
Single adjustable spike spotlight Aluminium Poly Powder Coated Black 2x 235mm spike length (total 470mm) 2m reinforced cable IP Rating: IP65
Ø63 86
90°Tilt
235 600
IP65
INDOOR/OUTDOOR WEATHERPROOF
235 Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1421T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
39
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights Tivah Aluminium Black • • • • •
Single adjustable spike spotlight Aluminium Poly Powder Coated Black 235mm spike length 2m reinforced cable IP Rating: IP65
Ø60
110
90°Tilt
374
IP65
235
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1427T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
40
2022 • Lighting By Havit
Tivah Aluminium Black • • • • • •
Adjustable spike spotlight Aluminium Poly Powder Coated Black Internal cable 405mm & 1000mm spike length 2m reinforced cable IP Rating: IP65 IMAGE
IMAGE
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1423T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1425T
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1407T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
Tri-Colour 2x 5w MR16 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
41
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights 180
90
60 110
220
90º Tilt / 270º Swivel
405 185
180 110
90
60
90º Tilt / 270º Swivel
600
1000
400
340
90
90
60 110
600
90º Tilt / 270º Swivel
1000
400
HV1407T-BLK Single Adjustable
HV1423T Single Adjustable
HV1425T Double Adjustable
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
42
2022 • Lighting By Havit Tivah Mini Spike • Single adjustable spike spotlight • 316 Stainless Steel and
Aluminium Poly Powder Coated Black • 140mm spike length • 1m reinforced cable • IP Rating: IP65
90
Ø40 70
90º Tilt
255 140
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1426NW-SS316
3000K 4000K
270lm 300lm
12v DC
3w 3000k MR11 LED + 3w 4000k MR11 LED
HV1426NW-BLK
3000K 4000K
270lm 300lm
12v DC
3w 3000k MR11 LED + 3w 4000k MR11 LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
43
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights Spitze Aluminium Black • • • • •
S ingle adjustable spike spotlight Aluminium Poly Powder Coated Black Spike length: 162mm 1m reinforced cable IP Rating: IP65
ø60
94
90°Tilt
56
162
IP65
Can be surface mounted
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1428C
5500K
320lm
12v DC
Built in 3w COB
HV1428N
4000K
300lm
12v DC
Built in 3w COB
HV1428W
3000K
275lm
12v DC
Built in 3w COB
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
44
2022 • Lighting By Havit
Oasis Aluminium Black • • • • •
S ingle adjustable spike spotlight Aluminium Poly Powder Coated Black Spike length: 260mm 1m reinforced cable IP Rating: IP65 IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
HV1429C-7W
5500K
595lm
INPUT
12v DC
IMAGE
Tri-Colour By Havit 3000K
HV1429W-7W
3000K
560lm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1429T-12W
3000K 4000K 5500K
960lm 1020lm 1080lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1429T-24W
3000K 4000K 5500K
1900lm 1970lm 2040lm
12v DC
INCLUDED LED
Built-in 7w COB
INCLUDED LED
Tri-Colour Built-in 12w COB
INCLUDED LED
Tri-Colour Built-in 24w COB
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
45
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights
90
57
85
90º Tilt
260
90
HV1429-7W
75
90º Tilt
104
260
90
88
90º Tilt
HV1429T-12W
113
260
HV1429T-24W
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
46
2022 • Lighting By Havit 110
110
34 295
163 295
163
HV1432T Spike and surface mounted
HV1431T Spike and surface mounted with hood
Stahl 316 Stainless Steel • • • •
Kap 316 Stainless Steel • • • •
Spike and surface mounted spot light Stainless Steel 316 Marine Grade 400mm reinforced cable IP Rating: IP66
Spike and surface mounted spot light with hood Stainless Steel 316 Marine Grade 400mm reinforced cable IP Rating: IP66 IMAGE
IMAGE
IP66
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1431T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1432T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED Tri-Colour 5w MR16 LED INCLUDED LED Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
47
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights
IP44
INDOOR/OUTDOOR WATER RESISTANT
38
Vidro 316 Stainless Steel • • • •
100
400 300
260 57 37
Garden spike light Stainless Steel 316 Marine Grade IP Rating: IP44 Garden spike light 6 pack Kit Includes: – 6x single spike lights – 15m of Cable – 6x 1.5w LED globes – 1x LED driver 35
45
80 93
IMAGE
56
46
PART NUMBER
COLOUR TEMP
LUMENS
HV1437C
5500K
110lm
INPUT 12v DC
IMAGE
HV1437W
3000K
90lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1438C
5500K
6x 110lm
HV1438W
3000K
6x 90lm
INPUT 240v Driver 12v AC Fitting
INCLUDED LED 1.5w G4 SzMD Bi pin INCLUDED LED 6 x 1.5w G4 Bi pin + driver
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. Max 2 additional fittings (HV1437) can be added to the kit(HV1438). Total 8 fittings with supplied driver. Larger kits can be configured using alternate Havit LED drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
48
2022 • Lighting By Havit Antique Brass • • • • •
Garden lights with spike Solid Brass With Antique Brass Finish Spike length: 225mm 1m reinforced cable IP Rating: IP54
i
IMAGE
IMAGE
IMAGE
IMAGE
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1458T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1451T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1454C
5500K
260lm 12v DC
3.2w G4 SMD Bi pin
INPUT
INCLUDED LED
12v DC
3.2w G4 SMD Bi pin
HV1454W
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1455C
5500K
260lm
HV1455W
3000K
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
240lm
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507
HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV145-BASE
49
Optional Base to suit: HV1451T, HV1454C & HV1454W, HV1455C & HV1455W & HV1458T
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights 22 73
ø54
Optional surface mount base available HV145-BASE
90º
0
13
174
90°Tilt /270° Swivel
54
365
90º Tilt
225
Ø38
172mm
190mm
563mm
560mm
225mm
225mm
Ø38
HV1458T Shawl
HV1451T Laiton
HV1454 Antic
Ø38
HV1455 Forn
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
50
2022 • Lighting By Havit 168
25x25
725
225
316 Stainless Steel (SS316)
Antique Brass (AB)
Black Aluminium (BLK)
IP54
Nedia • • • • •
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
Bollard Spike Light 316 Stainless Steel, Antique Brass and Aluminium Black Spike Length: 225mm 1m Reinforced cable IP Rating: IP54 IMAGE
Tri-Colour By Havit 3000K
i
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1459T-SS316
3000K 4000K 5500K
500lm 525lm 550lm
12v DC
Tri-Colour Built-in 7w LED
HV1459T-AB
3000K 4000K 5500K
500lm 525lm 550lm
12v DC
Tri-Colour Built-in 7w LED
HV1459T-BLK
3000K 4000K 5500K
500lm 525lm 550lm
12v DC
Tri-Colour Built-in 7w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
51
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights Nova • Single adjustable spike spotlight • 316 Stainless Steel and
Aluminium Poly Powder Coated Black
• Spike length: 170mm • 1m reinforced cable • IP Rating: IP65
ø60 110
90ºTilt
73
170
IP65
RGBW Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K
+3000K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1462T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV1462RGBW-SS316
RGB +3000K
200lm (3000k)
12v DC
HV1462T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV1462RGBW-BLK
RGB +3000K
200lm (3000k)
12v DC
5500K
INCLUDED LED 5w MR16 LED RGBW Built-in 5w LED 5w MR16 LED RGBW Built-in 5w LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
52
2022 • Lighting By Havit
Tivah Titanium Aluminium • • • • •
S ingle adjustable spike spotlight Titanium Coloured Aluminium Spike length: 2 x 238mm (total 476mm) 2m reinforced cable IP Rating: IP65
Ø60 110 90°Tilt
235 605
235
IP65
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1487T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
53
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Garden Lights
Highlite Aluminium • Single fixed spike light • Titanium Coloured Aluminium and • • • •
Aluminium Poly Powder Coated Black High grade perspex reflector lens 2m reinforced cable Spike length: 400mm IP Rating: IP65
Ø63
132
532 400
Tri-Colour By Havit 3000K
IP65
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
Suitable for use with LED globes only
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1489T-TTM
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1489T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
54
2022 • Lighting By Havit Onder 316 Stainless Steel • • • • •
Submersible pond light Stainless Steel 316 Marine Grade HV1491RGBW Must be used with a suitable RGBW Controller 6 metre cable IP Rating: IP68
180
85
13 93
110 180º Tilt
100
RGBW
Tri-Colour By Havit
IP68
3000K 4000K 5500K
+3000K
IMAGE
OUTDOOR SUMBERSIBLE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV1491T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
HV1491RGBW
RGBW
275lm (3000k)
12v DC
INCLUDED LED Tri-Colour 5w MR16 LED
RGBW Built-in 5w LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue.
55
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Submersible Lights Sotto 316 Stainless Steel • • • • •
Submersible pond light or garden light Stainless Steel 316 Marine Grade HV1494RGB must use suitable Havit RGB control gear 6 metre cable IP Rating: IP68
90+º
70
148
Ø115
90+º Tilt
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1494C
5500K
975lm
INPUT
INCLUDED LED
12v DC
Built-in 15w LED
HV1494W
3000K
873lm
HV1494RGB
RGB
500lm
12v DC
Built-in 15w LED
HV1494-REM
RGB
NA
12v DC
Remote and Receiver
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV350-SPK
Optional Garden Spike to suit HV1494 Models
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
56
2022 • Lighting By Havit
Tivah
• Double adjustable bollard spotlight • Stainless Steel 316 Marine Grade and
IP65
INDOOR/OUTDOOR WEATHERPROOF
Aluminium Poly Powder Coated Black
• IP Rating: IP65
IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1507T-SS316-240V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1507T-SS316-12V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
HV1507T-BLK-240V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
Tri-Colour 2x 5w GU10 LED
HV1507T-BLK-12V
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
12v DC
Tri-Colour 2x 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV9507 HV9508 HV9506D
3000K 4000K 5500K 3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. 85
HV1607
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
57
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Bollard Lights
370 90º Tilt / 270º Swivel
50 50
60 110
90
90
900
6 96 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
58
2022 • Lighting By Havit
Highlite • • • • • • •
63
LED bollard light High grade perspex reflector lens 2m reinforced cable 445mm height Raised lamp height to maximise light output IP Rating: IP54 To be used with LED globes only IMAGE
PART NUMBER HV1601T-SS316 HV1602T-SS316 HV1601T-BLK HV1602T-BLK HV1601T-TTM HV1602T-TTM HV1601T-AB HV1602T-AB
825
445 385
Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
83
Shown With Optional Extension
COLOUR TEMP
LUMENS
3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
270lm 285lm 300lm 270lm 285lm 300lm 270lm 285lm 300lm 270lm 285lm 300lm 270lm 285lm 300lm 270lm 285lm 300lm 270lm 285lm 300lm 270lm 285lm 300lm
INPUT
INCLUDED LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
240v
Tri-Colour 5w GU10 LED
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV9507 HV9508 HV9506D
3000K 4000K 5500K 3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV1603-SS316 HV1603-BLK HV1603-AB HV1607
59
Highlite bollard extension 380mm total extension height IP Rating: As per fitting used Up to 2 extensions can be used Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
63
380
85
400
32
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Bollard Lights
316 Stainless Steel (SS316)
Black Aluminium (BLK)
Titanium Aluminium (TTM)
i
Antique Brass (AB) Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
60
2022 • Lighting By Havit
Mini & Maxi 316 Stainless Steel • • • • •
Stainless Steel 316 Marine Grade Frosted diffuser 190mm, 600mm & 900mm height IP Rating: IP54 IK Rating: IK08 IMAGE
IMAGE
IMAGE
Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1605T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1605T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1606T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1606T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1608T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1608T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. 85
HV1607
61
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Bollard Lights
63
63
900
600
63
190
Ø102
Ø102
Ø102
Mini HV1605T-SS316
Maxi 600 HV1606T-SS316
Maxi 900 HV1608T-SS316
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
62
2022 • Lighting By Havit
Mini & Maxi Stainless Steel Black • • • • •
Stainless Steel Poly Powder Coated Black Frosted diffuser 190mm, 600mm & 900mm height IP Rating: IP54 IK Rating: IK08 IMAGE
IMAGE
IMAGE
Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1605T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1605T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1606T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1606T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1608T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1608T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. 85
HV1607
63
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Bollard Lights
63
63
900
600
63
190
Ø102
Ø102
Ø102
Mini HV1605T-BLK
Maxi 600 HV1606T-BLK
Maxi 900 HV1608T-BLK
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
64
2022 • Lighting By Havit
Mini & Maxi Louvre 316 Stainless Steel • • • • •
Stainless Steel 316 Marine Grade Clear diffuser with louvres 190mm, 600mm & 900mm height IP Rating: IP54 IK Rating: IK08 IMAGE
IMAGE
IMAGE
Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1615T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1615T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1616T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1616T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1618T-SS316-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1618T-SS316-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. 85
HV1607
65
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Bollard Lights
63
63
900
600
63
193
Ø102
Ø102
Ø102
Mini Louvre HV1615T-SS316
Maxi Louvre 600 HV1616T-SS316
Maxi Louvre 900 HV1618T-SS316
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
66
2022 • Lighting By Havit
Mini & Maxi Louvre Stainless Steel Black • • • • •
Stainless Steel Poly Powder Coated Black Clear diffuser with louvres 190mm, 600mm & 900mm height IP Rating: IP54 IK Rating: IK08 IMAGE
IMAGE
IMAGE
Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1615T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1615T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1616T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1616T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1618T-BLK-240V
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
HV1618T-BLK-12V
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. 85
HV1607
67
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Bollard Lights
63
63
900
600
63
193
Ø102
Ø102
Ø102
Mini Louvre HV1615T-BLK
Maxi Louvre 600 HV1616T-BLK
Maxi Louvre 900 HV1618T-BLK
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
68
2022 • Lighting By Havit Highlite Aluminium Black • • • • • •
LED Bollard light Aluminium Poly Powder Coated Black Opal Polycarbonate Lens 464mm Height IP Rating: IP65 IK Rating: IK08
63
HV1622T-BLK +
825
HV1622-BLK-EXT
464 388
IP65
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
84
IMAGE
4000K
Shown With Optional Extension
5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1622T-BLK-240V
3000K 4000K 5500K
860lm 915lm 970lm
240v
Tri-Colour Built-in 12w SMD
HV1622T-BLK-12V
3000K 4000K 5500K
860lm 915lm 970lm
12v DC
Tri-Colour Built-in 12w SMD
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV1607
HV1622-BLK-EXT Bollard light extension Aluminium Poly Powder coated black 380mm Height IP Rating: as per HV1622-BLK Up to 2 extensions can be used
69
85
63
380
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
400
32
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Bollard Lights Highlite Aluminium Black Black Aluminium LED Bollard Lights • • • • • • •
LED Bollard light Aluminium Poly Powder Coated Black High grade perspex lens 600mm and 1000mm height Selectable wattage - 18w or 24w IP Rating: IP65 IK Rating: IK08 120
120
1000
600
IP65
Tri-Colour By Havit
INDOOR/OUTDOOR WEATHERPROOF
3000K 4000K
HV1625T-BLK-240V HV1625T-BLK-24V
5500K
IMAGE
HV1626T-BLK-240V HV1626T-BLK-24V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1625T-BLK-240V
3000K 4000K 5500K
1900lm 1970lm 2040lm
240v
Tri-Colour Built-in 24w SMD
HV1625T-BLK-24V
3000K 4000K 5500K
1900lm 1970lm 2040lm
24v DC
Tri-Colour Built-in 24w SMD
HV1626T-BLK-240V
3000K 4000K 5500K
1900lm 1970lm 2040lm
240v
Tri-Colour Built-in 24w SMD
HV1626T-BLK-24V
3000K 4000K 5500K
1900lm 1970lm 2040lm
24v DC
Tri-Colour Built-in 24w SMD
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
70
2022 • Lighting By Havit Divad Aluminium Black • • • • • •
120x120
Square LED Bollard light Aluminium Poly Powder Coated Black Polycarbonate diffuser 600mm and 1000mm height IP Rating: IP65 IK Rating: IK08
120x120
1000
600
IP65
HV1629T-BLK-240V-SQ HV1629T-BLK-24V-SQ
IMAGE
INDOOR/OUTDOOR WEATHERPROOF
HV1628T-BLK-240V-SQ HV1628T-BLK-24V-SQ
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1628T-BLK-240V-SQ
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
Tri-Colour Built-in 12w SMD
HV1628T-BLK-24V-SQ
3000K 4000K 5500K
960lm 1020lm 1080lm
24v DC
Tri-Colour Built-in 12w SMD
HV1629T-BLK-240V-SQ
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
Tri-Colour Built-in 12w SMD
HV1629T-BLK-24V-SQ
3000K 4000K 5500K
960lm 1020lm 1080lm
24v DC
Tri-Colour Built-in 12w SMD
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
71
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Bollard Lights Divad Aluminium Black • • • • • •
Round LED bollard light Aluminium Poly Powder Coated Black Glass diffuser 600mm and 1000mm height IP Rating: IP65 IK Rating: IK08
ø120
ø120
1000
600
Tri-Colour By Havit 3000K
IP65
INDOOR/OUTDOOR WEATHERPROOF
4000K
HV1628T-BLK-240V-RND HV1628T-BLK-24V-RND
5500K
IMAGE
HV1629T-BLK-240V-RND HV1629T-BLK-24V-RND
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1628T-BLK-240V-RND
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
Tri-Colour Built-in 12w SMD
HV1628T-BLK-24V-RND
3000K 4000K 5500K
960lm 1020lm 1080lm
24v DC
Tri-Colour Built-in 12w SMD
HV1629T-BLK-240V-RND
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
Tri-Colour Built-in 12w SMD
HV1629T-BLK-24V-RND
3000K 4000K 5500K
960lm 1020lm 1080lm
24v DC
Tri-Colour Built-in 12w SMD
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
72
2022 • Lighting By Havit Metro 316 Stainless Steel • • • • • • • • •
Inground uplighter square and round Stainless Steel 316 Marine Grade cover Flush tempered glass Trafficable to 600Kg Face: 120mm x 120mm / Ø120mm Installation depth: 155mm IK Rating: IK08 IP Rating: IP65 NOTE: Adequate drainage must be allowed
RGBW Tri-Colour By Havit 3000K 4000K
+3000K
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1701T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HV1706T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1701RGBW
RGB+3000K
255lm (3000k)
12v DC
HV1801T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HV1806T
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
HV1801RGBW
RGB+3000K
255lm (3000k)
12v DC
RGBW Built in 5w LED
RGBW Built in 5w LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV9507 HV9508 HV9506D
3000K 4000K 5500K 3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue.
73 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Inground Lights
Cutout with Canister Ø110
12
Cutout without Canister Ø100 120x120
4
4 155
CANISTER
100
75
85
Cutout with Canister Ø110
12
24
Cutout without Canister Ø100 Ø120
4
4 155
100
CANISTER
85
75
24
RGBW Tri-Colour By Havit 3000K 4000K
+3000K
5500K
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
74
2022 • Lighting By Havit Luta 316 Stainless Steel • • • • • • • • • •
djustable square and round inground uplighter A Stainless Steel 316 Marine Grade cover 30º Tilt Trafficable to 500Kg Flush Tempered glass Face: 108x108mm / Ø108mm Installation depth needed: 160mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
IP67
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV1825T-SQ
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HV1825T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
75 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Inground Lights
Cutout with Canister Ø104
151
18
113
CANISTER
68
75
Cutout with Canister Ø104
151
Cutout without Canister Ø98 108x108 4 8
18
Cutout without Canister Ø98 Ø108 4 8 113
CANISTER
75
11
68
11
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
76
2022 • Lighting By Havit Toldo 316 Stainless Steel • • • • • • • • • • •
djustable round inground uplighter A Stainless Steel 316 Marine Grade cover 30º Beam angle Trafficable to 1000Kg Flush Tempered glass Installation depth HV1827: 160mm Installation depth HV1828: 220mm Installation depth HV1829: 290mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
HV1827
HV1828
HV1829
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1827C
5500K
300lm
HV1827W
3000K
270lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1828C
5500K
500lm
HV1828W
3000K
450lm
PART NUMBER
COLOUR TEMP
LUMENS
HV1829C
5500K
1800lm
HV1829W
3000K
INPUT
INCLUDED LED
12v DC
Built-in 3w
INPUT
INCLUDED LED
12v DC
Built-in 5w
INPUT
INCLUDED LED
24v DC
Built-in 20w
1600lm
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
77 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Inground Lights
Cutout with Canister Ø104
151
18
113
CANISTER
68
75
Cutout with Canister Ø147
CANISTER
11
Face: 108mm Tilt: 20º
Cutout without Canister Ø138 Ø160
210
Cutout without Canister Ø98 Ø108 4 8
4
170
181
11 100
110
Cutout with Canister
Cutout without Canister Ø212
Ø218
Ø230
CANISTER
Face: 160mm Tilt: 30º
283
215
4.5
200
165
Face: 230mm Tilt: 15º All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
78
2022 • Lighting By Havit Klip 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 100mm Installation depth: 145mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister
Cutout without Canister Ø85 Ø100
Ø90 8
4
113 139
Ø64 Ø89
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1831C-12V
5500K
630lm
HV1831W-12V
3000K
560lm
HV1831C-240V
5500K
630lm
HV1831W-240V
3000K
560lm
INPUT
INCLUDED LED
12v DC
Built-in 7w
240v
Built-in 7w
HAVIT COMPATIBLE ACCESSORIES
HV1831-F-SH
HV1831-HC
316 Stainless Steel Security Face with screw holes to suit HV1831 range
Honeycomb glare reduction lens to suit HV1831 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
79 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Inground Lights Klip 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 120° Flush tempered glass Trafficable to 1000Kg Face diameter: 160mm Installation depth: 120mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister Ø136 Ø160
Cutout with Canister Ø143
4
8
95
99
93
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1832C-12V
5500K
900lm
HV1832W-12V
3000K
800lm
HV1832C-240V
5500K
900lm
HV1832W-240V
3000K
800lm
INPUT
INCLUDED LED
12v DC
Built-in 10w
240v
Built-in 10w
HAVIT COMPATIBLE ACCESSORIES
HV1832-F-SH
HV1832-HC
316 Stainless Steel Security Face with screw holes to suit HV1832 range
Honeycomb glare reduction lens to suit HV1832 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
80
2022 • Lighting By Havit Klip 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 120° Flush tempered glass Trafficable to 1000Kg Face diameter: 210mm Installation depth: 115mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister Ø188
Cutout with Canister Ø194
Ø210 4
10
95
111
113
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1833C-12V
5500K
1800lm
HV1833W-12V
3000K
1600lm
HV1833C-240V
5500K
1800lm
HV1833W-240V
3000K
1600lm
INPUT
INCLUDED LED
12v DC
Built-in 20w
240v
Built-in 20w
HAVIT COMPATIBLE ACCESSORIES HV1833-F-SH
HV1833-HC
316 Stainless Steel Security Face with screw holes to suit HV1833 range Honeycomb glare reduction lens to suit HV1833 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
81 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Inground Lights Klip 316 Stainless Steel • • • • • • • • • •
I nground uplighter round narrow beam Stainless Steel 316 Marine Grade cover Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 210mm Installation depth: 275mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout with Canister Ø199
Cutout without Canister Ø188 Ø210
4
7
165
205
270
Ø131
Ø194
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1834C-12V
5500K
2700lm
HV1834W-12V
3000K
2400lm
HV1834C-240V
5500K
2700lm
HV1834W-240V
3000K
2400lm
INPUT
INCLUDED LED
12v DC
Built-in 30w
240v
Built-in 30w
HAVIT COMPATIBLE ACCESSORIES HV1834-F-SH
HV1834-HC
316 Stainless Steel Security Face with screw holes to suit HV1834 range Honeycomb glare reduction lens to suit HV1834 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
82
2022 • Lighting By Havit Klip 316 Stainless Steel • • • • • • • • • •
I nground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 120° Flush tempered glass Trafficable to 1000Kg Face diameter: 260mm Installation depth: 130mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister Ø230
Cutout with Canister
Ø260
Ø238
4
10
85
115
142
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1835C-12V
5500K
2700lm
HV1835W-12V
3000K
2400lm
HV1835C-240V
5500K
2700lm
HV1835W-240V
3000K
2400lm
INPUT
INCLUDED LED
12v DC
Built-in 30w
240v
Built-in 30w
HAVIT COMPATIBLE ACCESSORIES
HV1835-F-SH
HV1835-HC
316 Stainless Steel Security Face with screw holes to suit HV1835 range
Honeycomb glare reduction lens to suit HV1835 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
83 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Inground Lights Split 316 Stainless Steel • • • • • • • • • • • •
I nground uplighter round Stainless Steel 316 Marine Grade cover Full stainless steel body Anti glare honeycomb louvre Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 100mm Installation depth: 75mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister
Ø85 Ø100
Cutout with Canister
Ø89
4
5
65
71 Ø53
RGBW
IP67
INDOOR/OUTDOOR WEATHERPROOF
+3000K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1841C
5500K
300lm
HV1841W
3000K
240lm
HV1841RGBW
RGB + 3000K
115lm (3000k)
INPUT
INCLUDED LED
12v DC
Built-in 3w
12v DC
RGBW Built-in 3w
HAVIT COMPATIBLE ACCESSORIES HV1841-F-SH
Security Face with screw holes to suit HV1841 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
84
2022 • Lighting By Havit Split 316 Stainless Steel • • • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Full stainless steel body Anti glare honeycomb louvre Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 150mm Installation depth: 115mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister Cutout with Canister
Ø134 Ø150
Ø138 RGBW
22
IP67
65
30
100
INDOOR/OUTDOOR WEATHERPROOF
Ø92
+3000K
IMAGE
4
6
PART NUMBER
COLOUR TEMP
LUMENS
HV1842C
5500K
450lm
HV1842W
3000K
400lm
HV1842RGBW
RGB + 3000K
195lm (3000k)
INPUT
INCLUDED LED
12v DC
Built-in 5w
12v DC
RGBW Built-in 5w
HAVIT COMPATIBLE ACCESSORIES HV1842-F-SH
Security Face with screw holes to suit HV1842 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue.
85 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Inground Lights Split 316 Stainless Steel • • • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Full stainless steel body Anti glare honeycomb louvre Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 210mm Installation depth: 110mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister
Ø190 Ø210
Cutout with Canister
Ø195
RGBW
5
5
21
IP67
83
49
110
INDOOR/OUTDOOR WEATHERPROOF
Ø103
IMAGE
+3000K
PART NUMBER
COLOUR TEMP
LUMENS
HV1843C
5500K
1200lm
HV1843W
3000K
960lm
HV1843RGBW
RGB + 3000K
415lm (3000k)
INPUT
INCLUDED LED
12v DC
Built-in 12w
12v DC
RGBW Built-in 12w
HAVIT COMPATIBLE ACCESSORIES HV1843-F-SH
Security Face with screw holes to suit HV1843 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
86
2022 • Lighting By Havit Split 316 Stainless Steel • • • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Full stainless steel body Anti glare honeycomb louvre Beam angle: 60° Flush tempered glass Trafficable to 1000Kg Face diameter: 260mm Installation depth: 150mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister Ø235
Cutout with Canister Ø241
Ø260 5
8
25 75
45 147 Ø180
RGBW
IP67
INDOOR/OUTDOOR WEATHERPROOF
+3000K
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1845C
5500K
1350lm
HV1845W
3000K
1200lm
HV1845RGBW
RGB + 3000K
550lm (3000k)
INPUT
INCLUDED LED
12v DC
Built-in 18w
12v DC
RGBW Built-in 18w
HAVIT COMPATIBLE ACCESSORIES
HV1845-F-SH
Security Face with screw holes to suit HV1845 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue.
87 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Inground Lights Split 316 Stainless Steel • • • • • • • • • •
Inground uplighter round Stainless Steel 316 Marine Grade cover Beam angle: 6° Flush tempered glass Trafficable to 1000Kg Face diameter: 210mm Installation depth: 120mm IK Rating: IK10 IP Rating: IP67 NOTE: Adequate drainage must be allowed
Cutout without Canister Ø188
Cutout with Canister
Ø210
Ø192
4
10
64
104
111
28 111
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV1847C
5500K
1900lm
HV1847W
3000K
INPUT
INCLUDED LED
12v DC
Built-in 24w
1600lm
HAVIT COMPATIBLE ACCESSORIES
HV1847-F-SH
Security Face with screw holes to suit HV1847 range
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
88
2022 • Lighting By Havit Ollo
Cutout with Canister Ø87
• Recessed wall/step light with eyelid • Stainless Steel, Solid Copper Or Black Face With • • • •
Cutout without Canister Ø63 100
125
Marine Grade 316 Stainless Steel Body Tempered glass Installation depth needed: 125mm IP Rating: IP65 Not suitable for in-ground use.
Ø67
CANISTER
Ø92
Ø87 Ø63 17
8
IP65
INDOOR/OUTDOOR WEATHERPROOF
13
78
5
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV19012T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HV19032T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19012T-CP
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19012T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV190-HC
Honeycomb Lens to suit HV19012, HV19022, HV19032 & HV19042
HV9507
3000K 4000K 5500K
HV9508 HV9506D
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
89
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Inground & Step Lights
Stainless Steel 316
Stainless Steel 316 Black
Weathered Copper
Solid Copper
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
90
2022 • Lighting By Havit Ollo
Cutout with Canister Ø87
• Recessed wall/step/inground light • Stainless Steel, Solid Copper Or Black Face With
125
Marine Grade 316 Stainless Steel Body Tempered glass Trafficable to 500Kg Installation depth needed: 125mm IP Rating: IP65 IK Rating: IK08 NOTE: Adequate drainage must be allowed
• • • • • •
Cutout without Canister Ø63
Ø67
83
CANISTER
Ø87 Ø63
8
IP65
INDOOR/OUTDOOR WEATHERPROOF
Ø92
13
78
5
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV19022T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
Tri-Colour 5w MR16 LED
HV19042T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
240v
Tri-Colour 5w GU10 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19022T-CP
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19022T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES
MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV190-HC
Honeycomb Lens to suit HV19012, HV19022, HV19032 & HV19042
HV9507
3000K 4000K 5500K
HV9508 HV9506D
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
91
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Inground & Step Lights
Stainless Steel 316
Stainless Steel 316 Black
Solid Copper
Weathered Copper
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
92
2022 • Lighting By Havit Viale 316 Stainless Steel • • • • • •
Inground/driveway lights Stainless Steel 316 Marine Grade Trafficable to 500Kg Installation depth needed: 125mm IP Rating: IP65 NOTE: Adequate drainage must be allowed Cutout with Canister Ø87
Cutout without Canister Ø63 95
125
Ø67
5
CANISTER
Ø92
Ø87 Ø63
8
Cutout without Canister Ø63
13
78
17
83
125
Ø67
Cutout with Canister Ø87
CANISTER
Ø87 Ø63
8
IP65
Ø92
13
78
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
5
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19062T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19072T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19082T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19092T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV19102T
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
INCLUDED LED Tri-Colour 5w MR16 LED INCLUDED LED Tri-Colour 5w MR16 LED INCLUDED LED Tri-Colour 5w MR16 LED INCLUDED LED Tri-Colour 5w MR16 LED INCLUDED LED Tri-Colour 5w MR16 LED
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes
HV9507 HV9508
3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
Tri-Colour 3W/5W/7W MR16 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
93
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Inground & Step Lights
Single Inground HV19062T
Double Inground HV19072T
Triple Inground HV19082T
Four-way Inground HV19092T
Inground with grill HV19102T All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
94
2022 • Lighting By Havit Flame 316 Stainless Steel • • • • • • • •
Cut out ~ 30mm 35
DIY mini deck light Stainless Steel 316 Frosted tempered glass RGB multi-function (HV2826RGB Only) 2x 1.5 metre cable length per light IP Rating: light fittings IP67 / driver IP66 Suitable for in-ground installation Kit includes: 6 x single deck light (0.5w per light) 1x LED driver 1x 4m extension cable 1x RF RGB remote controller (HV2826RGB Only) IMAGE
IMAGE
28
30
IP67
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
HV2826C (6 light kit)
5500K
6x 50lm
HV2826W (6 light kit)
3000K
6x 40lm
HV2826RGB (6 light kit)
Multi Colour
6x 25lm
PART NUMBER
COLOUR TEMP
LUMENS
HV28261C
5500K
50lm
HV28261W
3000K
40lm
HV28261RGB
Multi Colour
25lm
HV2826-D-12W
NA
NA
HV9721
RGB
INPUT
INCLUDED LED
Driver: 240v LED
Built-in 6 x 0.5w with Driver
Fittings: 12v DC 6 x 0.5w with Driver and RF Controller INPUT
INCLUDED LED
12v DC
Built-in 0.5w
240v
NA
12v DC
Remote and Receiver
HAVIT COMPATIBLE ACCESSORIES HV2826-2M-EXT
HV2826RGB-2M-EXT
HV2826-4M-EXT
HV2826RGB-4M-EXT
Optional 2 metre extension cable to extend length between fittings. Sold separately
Optional 4 metre extension cable to extend length between fittings. Sold separately
Max 4 additional fittings (HV28261) can be added to the kit(HV2826). Total 10 fittings with supplied driver. Larger kits can be configured using alternate Havit LED drivers.
95
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Deck Lights
6 Light kit HV2826C or HV2826W
6 Light RGB kit HV2826RGB
LED Driver
End Cap DC12V
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
96
2022 • Lighting By Havit Uton • • • • • • •
Cut out ~ 30mm 40
DIY mini deck light Polycarbonate construction 2x 1.5 metre cable length per light RGB multi-function (HV2827RGB Only) IP Rating: light fittings IP67 / driver IP66 Suitable for in-ground installation Kit includes: 6 x single deck light (0.5w per light) 1x LED driver 1x 4m extension cable 1x RF RGB remote controller (HV2827RGB Only) IMAGE
IMAGE
31.5
27
IP67
INDOOR/OUTDOOR WEATHERPROOF
PART NUMBER
COLOUR TEMP
LUMENS
HV2827C (6 light kit)
5500K
6x 50lm
HV2827W (6 light kit)
3000K
6x 40lm
HV2827RGB (6 light kit)
Multi Colour
6x 25lm
PART NUMBER
COLOUR TEMP
LUMENS
HV28271C
5500K
50lm
HV28271W
3000K
40lm
HV28271RGB
Multi Colour
25lm
HV2826-D-12W
NA
NA
HV9721
RGB
INPUT Driver: 240v LED Fittings: 12v DC
INCLUDED LED
Built-in 6 x 0.5w with Driver
INPUT
INCLUDED LED
12v DC
Built-in 0.5w
240v
NA
12v DC
Remote and Receiver
HAVIT COMPATIBLE ACCESSORIES HV2826-2M-EXT
HV2826RGB-2M-EXT
HV2826-4M-EXT
HV2826RGB-4M-EXT
Optional 2 metre extension cable to extend length between fittings. Sold separately
Optional 4 metre extension cable to extend length between fittings. Sold separately
Max 4 additional fittings (HV28271) can be added to the kit(HV2827). Total 10 fittings with supplied driver. Larger kits can be configured using alternate Havit LED drivers.
97
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Deck Lights
6 Light kit HV2827C or HV2827W
6 Light RGB kit HV2827RGB
LED Driver
End Cap DC12V
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
98
2022 • Lighting By Havit
Tekk 316 Stainless Steel • • • • • • • • • •
Cut out ~ 50mm Ø64
Deck light 316 Stainless Steel face Foot trafficable High powered LED chip Face Diameter: 64mm 1.5 metre cable length Beam Angle: 30˚ IP Rating: IP67 NOTE: Adequate drainage must be allowed Not suitable for in-ground installation
75
93
18 Ø41
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2860C
5500K
180lm
HV2860N
4000K
170lm
HV2860W
3000K
160lm
INPUT
INCLUDED LED
12v DC
Built-in 3w
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
99
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Deck Lights
Kett 316 Stainless Steel • • • • • •
Cutout: Ø17mm Ø22
Mini deck light 316 Stainless Steel Face Diameter: 22mm 1.5 metre cable length IP Rating: IP65 NOTE: Adequate drainage must be allowed
56
Ø16
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2861C
5500K
35lm
HV2861W
3000K
30lm
HV2861B
Blue
NA
INPUT
INCLUDED LED
12v DC
Built-in 0.5w
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
100
2022 • Lighting By Havit Dome Aluminium • • • • •
One-way & two-way recessed deck lights Silver Coloured & Poly Powder Coated Black Aluminium Foot Trafficable IP Rating: IP65 NOTE: Adequate drainage must be allowed
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2871C-SLV
5500K
190lm
HV2871W-SLV
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2871C-BLK
5500K
190lm
HV2871W-BLK
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2872C-SLV
5500K
2x 190lm
HV2872W-SLV
3000K
2x 180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2872C-BLK
5500K
2x 190lm
HV2872W-BLK
3000K
INPUT
INCLUDED LED
12v DC
Built-in 3w
INPUT
INCLUDED LED
12v DC
Built-in 3w
INPUT
INCLUDED LED
12v DC
Built-in 2x 3w
INPUT
INCLUDED LED
12v DC
Built-in 2x 3w
2x 180lm
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
101
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Deck Lights
Ø80
49
Cutout: Ø26mm
HV2871C-SLV HV2871W-SLV
HV2871C-BLK HV2871W-BLK
HV2872C-SLV HV2872W-SLV
HV2872C-BLK HV2872W-BLK
Ø80
49
Cutout: Ø26mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
102
2022 • Lighting By Havit Elite Aluminium • • • •
Inground / deck light Silver Coloured & Poly Powder Coated Black Aluminium IP Rating: IP65 NOTE: Adequate drainage must be allowed HV2881
HV2882
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2881C-SLV
5500K
270lm
HV2881N-SLV
4000K
250lm
HV2881W-SLV
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2881C-BLK
5500K
270lm
HV2881N-BLK
4000K
250lm
HV2881W-BLK
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2882C-SLV
5500K
450lm
HV2882N-SLV
4000K
420lm
HV2882W-SLV
3000K
400lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2882C-BLK
5500K
450lm
HV2882N-BLK
4000K
420lm
HV2882W-BLK
3000K
400lm
INPUT
INCLUDED LED
12v DC
Built-in 3w
INPUT
INCLUDED LED
12v DC
Built-in 3w
INPUT
INCLUDED LED
12v DC
Built-in 5w
INPUT
INCLUDED LED
12v DC
Built-in 5w
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
103
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Deck Lights
Cutout without Canister Ø38
Cutout with Canister Ø46
Ø52
Ø46
55 80
35
HV2881
Cutout without Canister Ø51
Cutout with Canister Ø55
Ø62
Ø55
61
80
43
HV2882
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
104
2022 • Lighting By Havit
Stainless Steel 316
Solid Copper
Stainless Steel 316 Black
Weathered Copper
Mini Ollo
4
13
• Mini recessed step light with eyelid • 316 Stainless Steel, Solid Copper Or Black Face With • • • • •
50
Marine Grade 316 Stainless Steel Body Flush tempered glass Face diameter: 53mm Installation depth: 90mm IP Rating: IP67 Not suitable for inground installation
Ø53
Ø38
Cutout without Canister
Ø46
Cutout with Canister
63
15
CANISTER
IP67
90
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2891C-SS316
5500K
90lm
HV2891W-SS316
3000K
80lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2891C-CP
5500K
90lm
HV2891W-CP
3000K
80lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2891C-BLK
5500K
90lm
HV2891W-BLK
3000K
80lm
INDOOR/OUTDOOR WEATHERPROOF
INPUT
INCLUDED LED
12v DC
Built-in 1w
INPUT
INCLUDED LED
12v DC
Built-in 1w
INPUT
INCLUDED LED
12v DC
Built-in 1w
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
105
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Inground & Step Lights
Stainless Steel 316
Cutout with Canister Ø46
Solid Copper
CANISTER
90
Weathered Copper
Cutout without Canister Ø38
Ø53
Mini Ollo
4
• Mini recessed inground/step light • 316 Stainless Steel, Solid Copper Or Black Face With
50
63
Stainless Steel 316 Black
• • • • • •
13 Ø38
IP67
Marine Grade 316 Stainless Steel Body Flush tempered glass Face diameter: 53mm Installation depth: 90mm Foot trafficable IP Rating: IP67 NOTE: Adequate drainage must be allowed
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2892C-SS316
5500K
90lm
HV2892W-SS316
3000K
80lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2892C-CP
5500K
90lm
HV2892W-CP
3000K
80lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2892C-BLK
5500K
90lm
HV2892W-BLK
3000K
80lm
INPUT
INCLUDED LED
12v DC
Built-in 1w
INPUT
INCLUDED LED
12v DC
Built-in 1w
INPUT
INCLUDED LED
12v DC
Built-in 1w
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
106
2022 • Lighting By Havit Pinta IP65
• Surface mounted louvred & eyelid step light • Full Body Stainless Steel 316 Marine Grade &
INDOOR/OUTDOOR WEATHERPROOF
Solid Brass With Antique Brass Finish • Tempered glass • IP Rating: IP65
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV2901
NA
NA
240v
No globes supplied
HV2902
NA
NA
12v
No globes supplied
3000K 4000K 5500K 3000K 4000K 5500K
160lm 170lm 180lm 160lm 170lm 180lm
240v
Tri-Colour Built-in 2.3w LED
12v DC
Tri-Colour Built-in 2.3w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV2901-AB
NA
NA
240v
No globes supplied
HV2902-AB
NA
NA
12v
No globes supplied
3000K 4000K 5500K 3000K 4000K 5500K
160lm 170lm 180lm 160lm 170lm 180lm
240v
Tri-Colour Built-in 2.3w LED
12v DC
Tri-Colour Built-in 2.3w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV2905T-12V
3000K 4000K 5500K
160lm 170lm 180lm
12v DC
HV2904T
HV2903T-AB HV2904T-AB IMAGE
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
PART NUMBER
HV2903T
IMAGE
4000K 5500K
i IMAGE
Tri-Colour By Havit 3000K
INCLUDED LED
Tri-Colour Built-in 2.3w LED
HAVIT COMPATIBLE ACCESSORIES HV9511W
Optional G9 LED globe to suit HV2901
HV9529-3.2W
Optional G4 LED globe to suit HV2902
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
107
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights & Brick Lights
52
52
Ø100Ø100
22
2230
52
30
Ø100Ø100
316 Stainless Steel
52
Ø100Ø100
22
2230
52
30
Ø100Ø100
Antique Brass
52
Ø100 Ø100
21
21
Ø100 Ø100
316 Stainless Steel
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
108
2022 • Lighting By Havit Pinta • Surface mounted step light with eyelid • Full body Stainless Steel 316 Marine Grade with Stainless Steel or Copper face
• Extra large eyelid design to maximise light output • Frosted tempered glass • IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV2906
NA
NA
240v
No globes supplied
HV2907
NA
NA
12v
No globes supplied
HV2908C
5500K
180lm 240v
Built-in 2.3w
12v DC
Built-in 2.3w
HV2908W
3000K
160lm
HV2909C
5500K
180lm
HV2909W
3000K
160lm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV2916
NA
NA
240v
No globes supplied
HV2917
NA
NA
12v
No globes supplied
HV2918C
5500K
180lm 240v
Built-in 2.3w
12v DC
Built-in 2.3w
HV2918W
3000K
160lm
HV2919C
5500K
180lm
HV2919W
3000K
160lm
HAVIT COMPATIBLE ACCESSORIES HV9511W
Optional G9 LED globe to suit HV2906 & HV2916
HV9529-3.2W
Optional G4 LED globe to suit HV2907 & HV2917
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
109
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights & Brick Lights
101
38
64
26
Weathered Copper
101
38
64
26
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
110
2022 • Lighting By Havit Pinta Aluminium Black • • • •
Surface mounted eyelid & louvred step light Aluminium Poly Powder Coated Black Tempered glass IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV2921
NA
NA
240v
No globes supplied
HV2922
NA
NA
12v
No globes supplied
HV2923T
3000K 4000K 5500K
160lm 170lm 180lm
240v
Tri-Colour Built-in 2.3w LED
HV2924T
3000K 4000K 5500K
160lm 170lm 180lm
12v DC
Tri-Colour Built-in 2.3w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV2925T-12V
3000K 4000K 5500K
160lm 170lm 180lm
12v DC
INCLUDED LED
Tri-Colour Built-in 2.3w LED
HAVIT COMPATIBLE ACCESSORIES HV9511W
Optional G9 LED globe to suit HV2921
HV9529-3.2W
Optional G4 LED globe to suit HV2922
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
111
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights & Brick Lights
50
Ø98
21
Ø98
29
46
Ø98
Ø98
18
12
5
Ø71
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
112
2022 • Lighting By Havit Nava Aluminium
25
• Surface mounted open face & eyelid step light • Aluminium Poly Powder Coated Black And
Ø73
Ø71
Ø98
Ø98
28
Titanium Coloured Aluminium
• Opal Polycarbonate diffuser • IP Rating: IP65
25
Ø98
30
35
Ø98
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV2960C-TTM-240V
5500K
400lm
HV2960W-TTM-240V
3000K
360lm
HV2960C-TTM-12V
5500K
400lm
HV2960W-TTM-12V
3000K
360lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2960C-BLK-240V
5500K
400lm
HV2960W-BLK-240V
3000K
360lm
HV2960C-BLK-12V
5500K
400lm
HV2960W-BLK-12V
3000K
360lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2961C-TTM-240V
5500K
400lm
HV2961W-TTM-240V
3000K
360lm
HV2961C-TTM-12V
5500K
400lm
HV2961W-TTM-12V
3000K
360lm
PART NUMBER
COLOUR TEMP
LUMENS
HV2961C-BLK-240V
5500K
400lm
HV2961W-BLK-240V
3000K
360lm
HV2961C-BLK-12V
5500K
400lm
HV2961W-BLK-12V
3000K
360lm
INPUT
INCLUDED LED
240v
Built-in 5w
12v DC
Built-in 5w
INPUT
INCLUDED LED
240v
Built-in 5w
12v DC
Built-in 5w
INPUT
INCLUDED LED
240v
Built-in 5w
12v DC
Built-in 5w
INPUT
INCLUDED LED
240v
Built-in 5w
12v DC
Built-in 5w
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
113
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights & Brick Lights
HV2960-TTM
HV2960-BLK
HV2961-TTM
HV2961-BLK
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
114
2022 • Lighting By Havit
Bata Stainless Steel • Brick light with plain face & grill cover • Stainless Steel 316 Marine Grade Cover And • • • • •
Stainless Steel Poly Powder Coated Black Cover Powder coated die cast aluminium body Cutout with Canister: 238mm x 100mm Installation Depth: 90mm Frosted tempered glass IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER
COLOUR TEMP
HV3003T-SS316-240V
HV3003T-SS316-12V IMAGE
PART NUMBER HV3003T-BLK-240V
HV3003T-BLK-12V IMAGE
PART NUMBER HV3004T-SS316-240V
HV3004T-SS316-12V IMAGE
PART NUMBER HV3004T-BLK-240V
HV3004T-BLK-12V
LUMENS
3000K 4000K 5500K
800lm 850lm 900lm
COLOUR TEMP
LUMENS
3000K 4000K 5500K
800lm 850lm 900lm
COLOUR TEMP
LUMENS
3000K 4000K 5500K
800lm 850lm 900lm
COLOUR TEMP
LUMENS
3000K 4000K 5500K
800lm 850lm 900lm
INPUT
INCLUDED LED
240v
Tri-Colour Built-in 10w LED
12v DC
Tri-Colour Built-in 10w LED
INPUT
INCLUDED LED
240v
Tri-Colour Built-in 10w LED
12v DC
Tri-Colour Built-in 10w LED
INPUT
INCLUDED LED
240v
Tri-Colour Built-in 10w LED
12v DC
Tri-Colour Built-in 10w LED
INPUT
INCLUDED LED
240v
Tri-Colour Built-in 10w LED
12v DC
Tri-Colour Built-in 10w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
115
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights & Brick Lights
238 86
CANISTER WIDTH = 100mm
108 238
HV3003T-SS316 108
3
86
CANISTER
HV3003T-BLK
WIDTH = 100mm
252
238 108
78
CANISTER WIDTH = 100mm
233
62 87
86
108 108
3
252
78
238
62 87
CANISTER
233
86
108
252
3
WIDTH = 100mm 78
233
62 87
108 238
HV3004T-SS316
CANISTER
86
HV3004T-BLK
WIDTH = 100mm
108
3
252
238 108
78
62 87
CANISTER
86
WIDTH = 100mm
233
108 108
252
3 refer to pages 315 - 324 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
78
www.havit.com.au
116
2022 • Lighting By Havit
Bata Stainless Steel • Brick light with plain face & grill cover • Stainless Steel 316 Marine Grade Cover And • • • • •
Stainless Steel Poly Powder Coated Black Cover Powder coated die cast aluminium body Cutout with Canister: 158mm x 56mm Installation Depth: 60mm Frosted tempered glass IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3005T-SS316-12V
3000K 4000K 5500K
480lm 510lm 540lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3005T-BLK-12V
3000K 4000K 5500K
480lm 510lm 540lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3006T-SS316-12V
3000K 4000K 5500K
480lm 510lm 540lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3006T-BLK-12V
3000K 4000K 5500K
480lm 510lm 540lm
12v DC
INCLUDED LED
Tri-Colour Built-in 6w LED
INCLUDED LED
Tri-Colour Built-in 6w LED
INCLUDED LED
Tri-Colour Built-in 6w LED
INCLUDED LED
Tri-Colour Built-in 6w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
117
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights & Brick Lights
HV3005T-SS316
HV3005T-BLK
170 54
70 40 170
158 54
70
CANISTER
40
58
Width = 56mm
158 CANISTER
58
HV3006T-SS316
HV3006T-BLK
170 54
70 40 170
158 54
70 40
CANISTER
58
Width = 56mm
158 CANISTER
58
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. AllWidth globes = supplied 56mmwith fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
118
2022 • Lighting By Havit
Bata Stainless Steel • Brick light with plain face & grill cover • Stainless Steel 316 Marine Grade Cover And • • • • •
Stainless Steel Poly Powder Coated Black Cover Powder coated die cast aluminium body Cutout with Canister: 105mm x 41mm Installation Depth: 58mm Frosted tempered glass IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3007T-SS316-12V
3000K 4000K 5500K
240lm 255lm 270lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3007T-BLK-12V
3000K 4000K 5500K
240lm 255lm 270lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3008T-SS316-12V
3000K 4000K 5500K
240lm 255lm 270lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3008T-BLK-12V
3000K 4000K 5500K
240lm 255lm 270lm
12v DC
INCLUDED LED
Tri-Colour Built-in 3w LED
INCLUDED LED
Tri-Colour Built-in 3w LED
INCLUDED LED
Tri-Colour Built-in 3w LED
INCLUDED LED
Tri-Colour Built-in 3w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
119
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights & Brick Lights
110
HV3007T-SS316
HV3007T-BLK 54
45 26
110
105
54
45
CANISTER
26
55
Width = 41mm
105 CANISTER
54
HV3008T-SS316
HV3008T-BLK
110 54
45 26
110
105
54
45 26
CANISTER
55
Width = 41mm
105 CANISTER
55
Width = 41mm All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
120
2022 • Lighting By Havit
Lighting by Havit 121 www.havit.com.au
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Step Lights 185 35
3 34
165 165
24 Back of the fitting view
Cutout Dimensions = 165x24
Recessed Square Cutout 65x65mm 76
3
37
60
76
Recessed Rectangle
Slot • • • • •
Recessed square & rectangle steplight Aluminium White IP Rating: IP20 Indoor use only Supplied with dedicated LED driver
IP20 INDOOR USE ONLY
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV3102C
5500K
190lm
HV3102W
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3103C
5500K
190lm
HV3103W
3000K
INPUT
INCLUDED LED
240v
Built-in 2.5w LED
INPUT
INCLUDED LED
240v
Built-in 2.5w LED
180lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
122
2022 • Lighting By Havit
316 Stainless Steel
Aluminium White
Reces • • • • •
Aluminium Black
Cutout without Canister Ø60
Cutout with Canister Ø76
Recessed round step light 316 Stainless Steel and Aluminium Installation depth: 65mm 40° beam angle IP Rating: IP67
3 33
CANISTER
Ø76
Ø80
Ø50
IP67
INDOOR/OUTDOOR WEATHERPROOF
36
65
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV3205C-SS316
5500K
190lm
HV3205N-SS316
4000K
185lm
HV3205W-SS316
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3205C-WHT
5500K
190lm
HV3205N-WHT
4000K
185lm
HV3205W-WHT
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3205C-BLK
5500K
190lm
HV3205N-BLK
4000K
185lm
HV3205W-BLK
3000K
180lm
INPUT
INCLUDED LED
12v DC
Built-in 3w LED
INPUT
INCLUDED LED
12v DC
Built-in 3w LED
INPUT
INCLUDED LED
12v DC
Built-in 3w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
123
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
316 Stainless Steel
Aluminium White
Aluminium Black
Mini Reces • • • • •
Cutout without Canister Ø43
Cutout with Canister
Recessed round step light 316 Stainless Steel and Aluminium Installation depth: 40mm 40° beam angle IP Rating: IP67
Ø50
25
CANISTER
Ø50
IMAGE
IMAGE
Ø55
Ø39
IP67
27
35
IMAGE
2
PART NUMBER
COLOUR TEMP
LUMENS
HV3206C-SS316
5500K
60lm
HV3206N-SS316
4000K
57lm
HV3206W-SS316
3000K
55lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3206C-WHT
5500K
60lm
HV3206N-WHT
4000K
57lm
HV3206W-WHT
3000K
55lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3206C-BLK
5500K
60lm
HV3206N-BLK
4000K
57lm
HV3206W-BLK
3000K
55lm
INDOOR/OUTDOOR WEATHERPROOF
INPUT
INCLUDED LED
12v DC
Built-in 1w LED
INPUT
INCLUDED LED
12v DC
Built-in 1w LED
INPUT
INCLUDED LED
12v DC
Built-in 1w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
124
2022 • Lighting By Havit
Aluminium White
316 Stainless Steel
Reces • • • • •
Aluminium Black
Cutout without Canister Ø60
Cutout with Canister Ø76
3
65
Recessed square step light Stainless Steel 316 and Aluminium Installation depth: 65mm 40° beam angle IP Rating: IP67
CANISTER
33
Ø76
80x80
Ø50
IP67
INDOOR/OUTDOOR WEATHERPROOF
36
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV3215C-SS316
5500K
190lm
HV3215N-SS316
4000K
185lm
HV3215W-SS316
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3215C-WHT
5500K
190lm
HV3215N-WHT
4000K
185lm
HV3215W-WHT
3000K
180lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3215C-BLK
5500K
190lm
HV3215N-BLK
4000K
185lm
HV3215W-BLK
3000K
180lm
INPUT
INCLUDED LED
12v DC
Built-in 3w LED
INPUT
INCLUDED LED
12v DC
Built-in 3w LED
INPUT
INCLUDED LED
12v DC
Built-in 3w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
125
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
316 Stainless Steel
Aluminium White
Mini Reces • • • • •
Aluminium Black
Cutout without Canister
Cutout with Canister
Ø43 25 2
Ø50
Recessed square step light Stainless Steel 316 and Aluminium Installation depth: 40mm 40° beam angle IP Rating: IP67
35
CANISTER
55x55
Ø50 Ø39
IP67
INDOOR/OUTDOOR WEATHERPROOF
27
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV3216C-SS316
5500K
60lm
HV3216N-SS316
4000K
57lm
HV3216W-SS316
3000K
55lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3216C-WHT
5500K
60lm
HV3216N-WHT
4000K
57lm
HV3216W-WHT
3000K
55lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3216C-BLK
5500K
60lm
HV3216N-BLK
4000K
57lm
HV3216W-BLK
3000K
55lm
INPUT
INCLUDED LED
12v DC
Built-in 1w LED
INPUT
INCLUDED LED
12v DC
Built-in 1w LED
INPUT
INCLUDED LED
12v DC
Built-in 1w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
126
2022 • Lighting By Havit
Seefore Black • • •
Surface mounted step light Polycarbonate Black IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3221T-BLK
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3222T-BLK
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3223T-BLK
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
127
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
135
32
HV3221T-BLK
120
32
120
HV3222T-BLK
32
90
150
HV3223T-BLK
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
128
2022 • Lighting By Havit
Seefore White • • •
Surface mounted step light Polycarbonate White IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3221T-WHT
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3222T-WHT
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3223T-WHT
3000K 4000K 5500K
90lm 95lm 100lm
12v DC
Tri-Colour Built-in 3w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
129
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
135
32
HV3221T-WHT
120
32
120
HV3222T-WHT
32
90
150
HV3223T-WHT
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
130
2022 • Lighting By Havit
Seevive • • •
Rectangle surface mounted step light Polycarbonate Black or White with Opal diffuser IP Rating: IP65 220
32
IP65
INDOOR/OUTDOOR WEATHERPROOF
113
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3225T-BLK
3000K 4000K 5500K
150lm 155lm 160lm
12v DC
Tri-Colour Built-in 5w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3225T-WHT
3000K 4000K 5500K
150lm 155lm 160lm
12v DC
Tri-Colour Built-in 5w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
131
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
HV3263W
HV3264W
Cutout Ø30
Cutout Ø30
Ø42
Ø50
46
46
Sako 316 Stainless Steel • • • • • •
IP67
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
Recessed mini step lights 316 Stainless Steel 30° beam angle Cut out: 30mm Installation depth: 40mm IP Rating: IP67
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3263W
3000K
100lm
12v DC
Built-in 1.5w COB
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3264W
3000K
2x 70lm
12v DC
Built-in 2w COB
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
132
2022 • Lighting By Havit Fino Aluminium • • • •
Outdoor Step Light Aluminium Poly Powder Coated Black Polycarbonate Diffuser IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3268T-BLK-12V-RND
3000k 4000k 5500k
30lm 33lm 32lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3268T-BLK-12V-SQ
3000k 4000k 5500k
30lm 33lm 32lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3269T-BLK-12V-RND
3000K 4000K 5500K
195lm 199lm 198lm
12v DC
Tri-Colour Built-in 6w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3269T-BLK-12V-SQ
3000K 4000K 5500K
195lm 199lm 198lm
12v DC
Tri-Colour Built-in 6w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
133
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
HV3268T-BLK-12V-SQ 105
HV3268T-BLK-12V-RND Ø110
23
23
105
HV3269T-BLK-12V-SQ 160
HV3269T-BLK-12V-RND 28
Ø160
28
160
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
134
2022 • Lighting By Havit Fino Aluminium
• • • •
Outdoor Step Light Aluminium Poly Powder Coated White Polycarbonate Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3268T-WHT-12V-RND
3000k 4000k 5500k
30lm 33lm 32lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3268T-WHT-12V-SQ
3000k 4000k 5500k
30lm 33lm 32lm
12v DC
Tri-Colour Built-in 3w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3269T-WHT-12V-RND
3000K 4000K 5500K
195lm 199lm 198lm
12v DC
Tri-Colour Built-in 6w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3269T-WHT-12V-SQ
3000K 4000K 5500K
195lm 199lm 198lm
12v DC
Tri-Colour Built-in 6w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
135
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
HV3268T-WHT-12V-SQ 105
HV3268T-WHT-12V-RND Ø110
23
23
105
HV3269T-WHT-12V-SQ 160
HV3269T-WHT-12V-RND 28
Ø160
28
160
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
136
2022 • Lighting By Havit
Taso Aluminium Black • • • •
Surface mounted step light Aluminium Poly Powder Coated Black Polycarbonate Opal Diffuser IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3270T-BLK-12V
3000K 4000K 5500K
180lm 190lm 200lm
12v DC
Tri-Colour Built-in 3.5w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3271T-BLK-12V
3000K 4000K 5500K
350lm 360lm 370lm
12v DC
Tri-Colour Built-in 6w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3272T-BLK-12V
3000K 4000K 5500K
600lm 625lm 650lm
12v DC
Tri-Colour Built-in 10w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
137
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
HV3270T-BLK-12V 57
30 30
130
HV3271T-BLK-12V 63
35 170
35
HV3272T-BLK-12V 81 46 240
46
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
138
2022 • Lighting By Havit
Taso Aluminium White • • • •
Surface mounted step light Aluminium Poly Powder Coated White Polycarbonate Opal Diffuser IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3270T-WHT-12V
3000K 4000K 5500K
180lm 190lm 200lm
12v DC
Tri-Colour Built-in 3.5w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3271T-WHT-12V
3000K 4000K 5500K
350lm 360lm 370lm
12v DC
Tri-Colour Built-in 6w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3272T-WHT-12V
3000K 4000K 5500K
600lm 625lm 650lm
12v DC
Tri-Colour Built-in 10w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
139
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
HV3270T-WHT-12V 57
30 30
130
HV3271T-WHT-12V 63
35 170
35
HV3272T-WHT-12V 81 46 240
46
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
140
2022 • Lighting By Havit
Taso Aluminium Silver • • • •
Surface mounted step light Aluminium Poly Powder Coated Silver Polycarbonate Opal Diffuser IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3270T-SLV-12V
3000K 4000K 5500K
180lm 190lm 200lm
12v DC
Tri-Colour Built-in 3.5w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3271T-SLV-12V
3000K 4000K 5500K
350lm 360lm 370lm
12v DC
Tri-Colour Built-in 6w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3272T-SLV-12V
3000K 4000K 5500K
600lm 625lm 650lm
12v DC
Tri-Colour Built-in 10w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
141
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
HV3270T-SLV-12V 57
30 30
130
HV3271T-SLV-12V 63
35 170
35
HV3272T-SLV-12V 81 46 240
46
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
142
2022 • Lighting By Havit
Virsma Aluminium Black • • • •
Surface mounted step light Aluminium Poly Powder Coated Black Polycarbonate Opal Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3275T-BLK-240V
3000K 4000K 5500K
200lm 210lm 220lm
240v
Tri-Colour Built-in 6w SMD LED
HV3275T-BLK-12V
3000K 4000K 5500K
200lm 210lm 220lm
12v DC
Tri-Colour Built-in 6w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3276T-BLK-240V
3000K 4000K 5500K
110lm 115lm 120lm
240v
Tri-Colour Built-in 4w SMD LED
HV3276T-BLK-12V
3000K 4000K 5500K
110lm 115lm 120lm
12v DC
Tri-Colour Built-in 4w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3277T-BLK-240V
3000K 4000K 5500K
110lm 115lm 120lm
240v
Tri-Colour Built-in 4w SMD LED
HV3277T-BLK-12V
3000K 4000K 5500K
110lm 115lm 120lm
12v DC
Tri-Colour Built-in 4w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
143
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
90 200
37 HV3275T-BLK
148
148
37
HV3276T-BLK
148
37
HV3277T-BLK All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
144
2022 • Lighting By Havit
Virsma Aluminium White • • • •
Surface mounted step light Aluminium Poly Powder Coated White Polycarbonate Opal Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3275T-WHT-240V
3000K 4000K 5500K
200lm 210lm 220lm
240v
Tri-Colour Built-in 6w SMD LED
HV3275T-WHT-12V
3000K 4000K 5500K
200lm 210lm 220lm
12v DC
Tri-Colour Built-in 6w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3276T-WHT-240V
3000K 4000K 5500K
110lm 115lm 120lm
240v
Tri-Colour Built-in 4w SMD LED
HV3276T-WHT-12V
3000K 4000K 5500K
110lm 115lm 120lm
12v DC
Tri-Colour Built-in 4w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3277T-WHT-240V
3000K 4000K 5500K
110lm 115lm 120lm
240v
Tri-Colour Built-in 4w SMD LED
HV3277T-WHT-12V
3000K 4000K 5500K
110lm 115lm 120lm
12v DC
Tri-Colour Built-in 4w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
145
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
90 200
37 HV3275T-WHT
148
148
37
HV3276T-WHT
148
37
HV3277T-WHT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
146
2022 • Lighting By Havit
Shim Aluminium Black • • • •
Surface mounted LED step light Aluminium Poly Powder Coated Black Polycarbonate Opal Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3278T-BLK-240V
3000K 4000K 5500K
960lm 1020lm 1080lm
240V
Tri-Colour Built-in 12w SMD LED
HV3278T-BLK-12V
3000K 4000K 5500K
960lm 1020lm 1080lm
12v DC
Tri-Colour Built-in 12w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3279T-BLK-240V
3000K 4000K 5500K
1120lm 1150lm 1190lm
240V
Tri-Colour Built-in 14w SMD LED
HV3279T-BLK-12V
3000K 4000K 5500K
1120lm 1150lm 1190lm
12v DC
Tri-Colour Built-in 14w SMD LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
147
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
HV3278T-BLK 182 120
63
203
HV3279T-BLK
280 120
301
65
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
148
2022 • Lighting By Havit
Shim Aluminium White • • • •
Surface mounted LED step light Aluminium Poly Powder Coated White Polycarbonate Opal Diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3278T-WHT-240V
3000K 4000K 5500K
960lm 1020lm 1080lm
240V
Tri-Colour Built-in 12w SMD LED
HV3278T-WHT-12V
3000K 4000K 5500K
960lm 1020lm 1080lm
12v DC
Tri-Colour Built-in 12w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3279T-WHT-240V
3000K 4000K 5500K
1120lm 1150lm 1190lm
240V
Tri-Colour Built-in 14w SMD LED
HV3279T-WHT-12V
3000K 4000K 5500K
1120lm 1150lm 1190lm
12v DC
Tri-Colour Built-in 14w SMD LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
149
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
HV3278T-WHT 182 120
63
203
HV3279T-WHT
280 120
301
65
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
150
2022 • Lighting By Havit Occhio • Surface mounted LED eyelid step light • 316 Stainless Steel, Solid Brass & Antique Brass • IP Rating: IP65
28 56
i
47
IMAGE
IMAGE
IMAGE
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
PART NUMBER
COLOUR TEMP
LUMENS
HV3281C-SS316
5500K
255lm
HV3281W-SS316
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3281C-BR
5500K
255lm
HV3281W-BR
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3281C-AB
5500K
255lm
HV3281W-AB
3000K
IP65
INDOOR/OUTDOOR WEATHERPROOF
INPUT
INCLUDED LED
12v DC
Built-in 3w COB LED
INPUT
INCLUDED LED
12v DC
Built-in 3w COB LED
INPUT
INCLUDED LED
12v DC
Built-in 3w COB LED
240lm
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
151
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
316 Stainless Steel
Solid Brass
Antique Brass
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
152
2022 • Lighting By Havit Mood • Surface mounted LED step light • 316 Stainless Steel, Stainless Steel Black, Stainless Steel White, Solid Brass Graphite, Solid Bronze
• IP Rating: IP54
67
63
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
i
114
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3282T-SS316
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3282T-BLK
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3282T-WHT
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3282T-GPH
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3282T-BRZ
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
INCLUDED LED Tri-Colour Built-in 6w LED INCLUDED LED Tri-Colour Built-in 6w LED INCLUDED LED Tri-Colour Built-in 6w LED INCLUDED LED Tri-Colour Built-in 6w LED INCLUDED LED Tri-Colour Built-in 6w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
153
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights Stainless Steel
Stainless Steel Black
Solid Brass Graphite
Stainless Steel White
Solid Bronze
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
154
2022 • Lighting By Havit Ridge • Surface mounted LED step light • 316 Stainless Steel, Stainless Steel Black, Stainless Steel White, Solid Brass Graphite, Solid Bronze
• IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
62
63
i
114
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
63
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments.
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-SS316
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-BLK
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-WHT
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-GPH
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3283T-BRZ
3000K 4000K 5500K
460lm 490lm 520lm
12v DC
INCLUDED LED Tri-Colour Built-in 6w LED INCLUDED LED Tri-Colour Built-in 6w LED INCLUDED LED Tri-Colour Built-in 6w LED INCLUDED LED Tri-Colour Built-in 6w LED INCLUDED LED Tri-Colour Built-in 6w LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
155
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights Stainless Steel
Stainless Steel Black
Solid Brass Graphite
Stainless Steel White
Solid Bronze
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
156
2022 • Lighting By Havit Stylez • Rectangular LED steplight • 316 Stainless Steel, Stainless Steel Graphite, Solid Brass, Antique Brass, Stainless Steel Black and Stainless Steel White
• IP Rating: IP65
60
i
IP65
INDOOR/OUTDOOR WEATHERPROOF
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments. 14
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-SS316
5500K
250lm
HV3288W-SS316
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-GPH
5500K
250lm
HV3288W-GPH
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-BR
5500K
250lm
HV3288W-BR
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-AB
5500K
250lm
HV3288W-AB
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-BLK
5500K
250lm
HV3288W-BLK
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3288C-WHT
5500K
250lm
HV3288W-WHT
3000K
80
INPUT
INCLUDED LED
12v DC
Built-in 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 3w SMD LED
240lm
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
157
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
316 Stainless Steel
Graphite
Solid Brass
Antique Brass
Black
White
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
158
2022 • Lighting By Havit Stylez • Rectangular up & down LED steplight • 316 Stainless Steel, Stainless Steel Graphite, Solid Brass, Antique Brass, Stainless Steel Black and Stainless Steel White • IP Rating: IP65
IP65
i
INDOOR/OUTDOOR WEATHERPROOF
120
Solid Brass and Solid Copper fittings will naturally tarnish, Solid Brass fittings with additional coloured coatings (Antique Brass & Graphite) may tarnish through the coating when installed in outdoor environments. 14
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-SS316
5500K
2x 250lm
HV3289W-SS316
3000K
2x 240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-GPH
5500K
2x 250lm
HV3289W-GPH
3000K
2x 240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-BR
5500K
2x 250lm
HV3289W-BR
3000K
2x 240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-AB
5500K
2x 250lm
HV3289W-AB
3000K
2x 240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-BLK
5500K
2x 250lm
HV3289W-BLK
3000K
2x 240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV3289C-WHT
5500K
2x 250lm
HV3289W-WHT
3000K
2x 240lm
80
INPUT
INCLUDED LED
12v DC
Built-in 2x 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 2x 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 2x 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 2x 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 2x 3w SMD LED
INPUT
INCLUDED LED
12v DC
Built-in 2x 3w SMD LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
159
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Step Lights
316 Stainless Steel
Graphite
Solid Brass
Antique Brass
Black
White
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
160
2022 • Lighting By Havit Halo Aluminium • • • • •
Indoor or Outdoor Wall Light Aluminium Poly Powder Coated Black or White Polycarbonate Diffuser Triac Dimmable IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
PART NUMBER HV3591T-BLK HV3591T-WHT
IMAGE
PART NUMBER HV3592T-BLK
HV3592T-WHT IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
3000K 4000K 5500K
540lm 550lm 560lm
240v
Tri-Colour Built-in 7w SMD LED
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
3000K 4000K 5500K
960lm 1020lm 1080lm
240v
COLOUR TEMP
LUMENS
INPUT
3000K 4000K 5500K
1315lm 1380lm 1440lm
240v
COLOUR TEMP
LUMENS
INPUT
3000K 4000K 5500K
1920lm 2040lm 2160lm
240v
Tri-Colour Built-in 12w SMD LED
INCLUDED LED
HV3593T-BLK Tri-Colour Built-in 18w SMD LED
HV3593T-WHT IMAGE
PART NUMBER
INCLUDED LED
HV3594T-BLK Tri-Colour Built-in 24w SMD LED
HV3594T-WHT
161
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
HV3591T 8 35
HV3592T 8
Ø80 35
Ø100
Ø200
Ø150
43
43
HV3593T
HV3594T 8
8
39 39
Ø130 Ø130
Ø250
47
Ø300
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
47
162
2022 • Lighting By Havit Cara Aluminium • • • •
Exterior Up and Down Wall Light Aluminum Poly Powder Coated Black and White Polycarbonate Opal Diffuser IP Rating: IP54
Tri-Colour By Havit 3000K
IP54
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
163
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV35021T-BLK
3000K 4000K 5500K
2x 230lm 2x 245lm 2x 235lm
240v
Tri-Colour Built in 2x 3w LED
HV35021T-WHT
3000K 4000K 5500K
2x 230lm 2x 245lm 2x 235lm
240v
Tri-Colour Built in 2x 3w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV35022T-BLK
3000K 4000K 5500K
2x 250lm 2x 300lm 2x 280lm
240v
Tri-Colour Built in 2x 4.5w LED
HV35022T-WHT
3000K 4000K 5500K
2x 250lm 2x 300lm 2x 280lm
240v
Tri-Colour Built in 2x 4.5w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
HV35021T-BLK
HV35021T-WHT 160
128
40
HV35022T-BLK
HV35022T-WHT 53
110
200
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
164
2022 • Lighting By Havit
165
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
240
290
84
Mask 316 Stainless Steel • • • •
Wall mask 316 Stainless Steel Marine Grade Five slot with opal diffuser IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV36042T
3000K 4000K 5500K
520lm 550lm 580lm
240v
Tri-Colour Built-in 10w SMD LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
166
2022 • Lighting By Havit Taper 316 Stainless Steel • • • •
Wall wedge 316 Stainless Steel Marine Grade Frosted tempered glass IP Rating: IP44
IP44
INDOOR/OUTDOOR WATER RESISTANT
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3601T-SS316
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3602T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3605T-SS316
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3608C-SS316
5500K
110lm 12v DC
HV3608W-SS316
3000K
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
1.5w SMD G4 Bi pin
90lm
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV9507 HV9508 HV9506D
3000K 4000K 5500K 3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
167
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
105 250
120
HV3601T-SS316
HV3602T-SS316 / HV3605T-SS316
HV3608C-SS316 / HV3608W-SS316 75 160 70
60
85
70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
168
2022 • Lighting By Havit Taper Stainless Steel Black • • • •
Wall wedge 316 Stainless Steel Poly Powder Coated Black Frosted tempered glass IP Rating: IP44
IP44
INDOOR/OUTDOOR WATER RESISTANT
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3601T-BLK
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3602T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3605T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3608C-BLK
5500K
110lm 12v DC
HV3608W-BLK
3000K
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
1.5w SMD G4 Bi pin
90lm
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV9507 HV9508 HV9506D
3000K 4000K 5500K 3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
169
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
105 250
120
HV3601T-BLK
HV3602T-BLK / HV3605T-BLK
HV3608C-BLK / HV3608W-BLK 75 160 70
60
85
70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
170
2022 • Lighting By Havit Taper Stainless Steel White • • • •
Wall wedge 316 Stainless Steel Poly Powder Coated White Frosted tempered glass IP Rating: IP44
IP44
INDOOR/OUTDOOR WATER RESISTANT
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3601T-WHT
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3602T-WHT
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3605T-WHT
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3608C-WHT
5500K
110lm 12v DC
HV3608W-WHT
3000K
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
1.5w SMD G4 Bi pin
90lm
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV9507 HV9508 HV9506D
3000K 4000K 5500K 3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
171
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
105 250
120
HV3601T-WHT
HV3602T-WHT / HV3605T-WHT
HV3608C-WHT / HV3608W-WHT 75 160 70
60
85
70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
172
2022 • Lighting By Havit Taper Copper • • • • •
Wall wedge Copper body Frosted tempered glass Fast weathering for classic aged appearance IP Rating: IP44
IP44
INDOOR/OUTDOOR WATER RESISTANT
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3601T-CP
3000K 4000K 5500K
700lm 720lm 740lm
240v
Tri-Colour 9w E27 LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3602T-CP
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3605T-CP
3000K 4000K 5500K
270lm 285lm 300lm
12v DC
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3608C-CP
5500K
110lm 12v DC
HV3608W-CP
3000K
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 5w MR16 LED
INCLUDED LED
1.5w SMD G4 Bi pin
90lm
HAVIT COMPATIBLE ACCESSORIES MR16 Models are compatible with 12v & 24v Havit Tri-Colour 9in1 Globes GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
HV9507 HV9508 HV9506D
3000K 4000K 5500K 3000K 4000K 5500K
240lm-630lm
12v DC
240lm-630lm
24v DC
240lm-630lm
240v
Tri-Colour 3W/5W/7W MR16 LED Tri-Colour 3W/5W/7W GU10 LED
See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
173
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
105 250
120
HV3601T-CP
Weathered Copper
HV3602T-CP / HV3605T-CP
HV3608C-CP / HV3608W-CP 75 160 70
60
85
70
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
174
2022 • Lighting By Havit
Ø102
63
210
25
193
Ø110
Mini Stainless Steel
160
• Exterior Wall Light • 316 Stainless Steel and 316 Stainless Steel Black • IP Rating: IP54 IMAGE
IMAGE
175
Tri-Colour By Havit 3000K 4000K
IP54
INDOOR/OUTDOOR WEATHERPROOF
5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3621T-SS316
3000K 4000K 5500K
700lm 720lm 740lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3621T-BLK
3000K 4000K 5500K
700lm 720lm 740lm
240V
INCLUDED LED
Tri-Colour 9w E27 LED
INCLUDED LED
Tri-Colour 9w E27 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Ø102
63
210
25
193
Ø110
Mini Louvre Stainless Steel
160
• Exterior Wall Light • 316 Stainless Steel and 316 Stainless Steel Black • IP Rating: IP54
Tri-Colour By Havit 3000K 4000K
IP54
INDOOR/OUTDOOR WEATHERPROOF
5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3622T-SS316
3000K 4000K 5500K
700lm 720lm 740lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3622T-BLK
3000K 4000K 5500K
700lm 720lm 740lm
240V
INCLUDED LED
Tri-Colour 9w E27 LED
INCLUDED LED
Tri-Colour 9w E27 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
176
2022 • Lighting By Havit Aries
• Outdoor Fixed Down Wall Light • 316 Stainless Steel with Antique Brass Finish, Polished 316 Stainless Steel,
73
316 Stainless Steel Black and 316 Stainless Steel White
121
• IP Rating: IP65
Ø60
Tri-Colour By Havit 3000K
IP65
54
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
75
IMAGE
IMAGE
IMAGE
IMAGE
177
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3625T-AB
3000K 4000K 5500K
448lm 576lm 534lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3625T-PSS316
3000K 4000K 5500K
448lm 576lm 534lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3625T-BLK
3000K 4000K 5500K
448lm 576lm 534lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3625T-WHT
3000K 4000K 5500K
448lm 576lm 534lm
240v
INCLUDED LED
Tri-Colour Built in 6w LED
INCLUDED LED
Tri-Colour Built in 6w LED
INCLUDED LED
Tri-Colour Built in 6w LED
INCLUDED LED
Tri-Colour Built in 6w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
316 Stainless Steel with Antique Brass Finish
316 Stainless Steel Black
Polished 316 Stainless Steel
316 Stainless Steel White
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
178
2022 • Lighting By Havit Aries
• Outdoor Up & Down Wall Light • 316 Stainless Steel with Antique Brass Finish, Polished 316 Stainless Steel, 316 Stainless Steel Black and 316 Stainless Steel White
73
• IP Rating: IP65
170
Ø60
Tri-Colour By Havit 3000K
IP65
54
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
75
IMAGE
IMAGE
IMAGE
IMAGE
179
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3626T-AB
3000K 4000K 5500K
2x 448lm 2x 576lm 2x 534lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3626T-PSS316
3000K 4000K 5500K
2x 448lm 2x 576lm 2x 534lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3626T-BLK
3000K 4000K 5500K
2x 448lm 2x 576lm 2x 534lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3626T-WHT
3000K 4000K 5500K
2x 448lm 2x 576lm 2x 534lm
240v
INCLUDED LED
Tri-Colour Built in 2x 6w LED
INCLUDED LED
Tri-Colour Built in 2x 6w LED
INCLUDED LED
Tri-Colour Built in 2x 6w LED
INCLUDED LED
Tri-Colour Built in 2x 6w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
316 Stainless Steel with Antique Brass Finish
316 Stainless Steel Black
Polished 316 Stainless Steel
316 Stainless Steel White
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
180
2022 • Lighting By Havit Porter Aluminium
• • • • •
Ø113
151
Large round wall pillar light Aluminium Poly Powder Coated Black or White Tempered glass Triac Dimmable IP Rating: IP54
103
53
38
82
125
Ø113
Ø113
151
IP54
INDOOR/OUTDOOR WEATHERPROOF
103
Tri-Colour By Havit
53
82
210
3000K 4000K
Ø113
5500K
IMAGE
IMAGE
IMAGE
IMAGE
181
38
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3628T-BLK
3000K 4000K 5500K
1200lm 1275lm 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3628T-WHT
3000K 4000K 5500K
1200lm 1275lm 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3629T-BLK
3000K 4000K 5500K
2x 1200lm 2x 1275lm 2x 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3629T-WHT
3000K 4000K 5500K
2x 1200lm 2x 1275lm 2x 1350lm
240V
INCLUDED LED
Tri-Colour Built-in 15w
INCLUDED LED
Tri-Colour Built-in 15w
INCLUDED LED
Tri-Colour Built-in 2x 15w
INCLUDED LED
Tri-Colour Built-in 2x 15w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down
Up & Down
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
182
2022 • Lighting By Havit Porter Aluminium
• • • • •
Large square wall pillar light Aluminium Poly Powder Coated Black or White Tempered glass Triac Dimmable IP Rating: IP54
83 39
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit
210
39
3000K
120
56
159
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
183
159
120
83
IP54
120
120 56
120
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3628T-BLK -SQ
3000K 4000K 5500K
1200lm 1275lm 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3628T-WHT-SQ
3000K 4000K 5500K
1200lm 1275lm 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3629T-BLK-SQ
3000K 4000K 5500K
2x 1200lm 2x 1275lm 2x 1350lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3629T-WHT-SQ
3000K 4000K 5500K
2x 1200lm 2x 1275lm 2x 1350lm
240V
INCLUDED LED
Tri-Colour Built-in 15w
INCLUDED LED
Tri-Colour Built-in 15w
INCLUDED LED
Tri-Colour Built-in 2x 15w
INCLUDED LED
Tri-Colour Built-in 2x 15w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down
Up & Down
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
184
2022 • Lighting By Havit
Single Adjustable
Accord Aluminium Black • • • •
Square wall light Aluminium Poly Powder Coated Black Tempered glass IP Rating: IP54
100
65
90
Adjustable
90º Tilt
Tri-Colour By Havit 3000K
IP54
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
185
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3630T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
240v
INCLUDED LED
Tri-Colour 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down 81
68
92 81
81
Up & Down 68 150
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
Tri-Colour By Havit
81
3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3631T-BLK
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3632T-BLK
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 2x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
186
2022 • Lighting By Havit
Single Adjustable
Accord Aluminium White • • • •
Square wall light Aluminium Poly Powder Coated White Tempered glass IP Rating: IP54
100
65
90
Adjustable
90º Tilt
Tri-Colour By Havit 3000K
IP54
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
187
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3630T-WHT
3000K 4000K 5500K
270lm 285lm 300lm
240v
INCLUDED LED
Tri-Colour 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down 81
68
92 81
81
Up & Down 68 150
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
Tri-Colour By Havit
81
3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3631T-WHT
3000K 4000K 5500K
270lm 285lm 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3632T-WHT
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED
Tri-Colour 5w GU10 LED
INCLUDED LED
Tri-Colour 2x 5w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
188
2022 • Lighting By Havit
Veldi • Square up & down wall pillar light • 316 Stainless Steel and
182
Powder Coated 316 Stainless Steel Black & White • Tempered glass • IP Rating: IP54
IP54
92
INDOOR/OUTDOOR WEATHERPROOF
63
IMAGE
IMAGE
IMAGE
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3633T-SS316
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3633T-BLK
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3633T-WHT
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 2x 5w GU10 LED
HAVIT COMPATIBLE ACCESSORIES GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
189
HV9506D
3000K 4000K 5500K
240lm-630lm
240v
Tri-Colour 3W/5W/7W
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Platz Aluminium • • • •
Square up & down wall pillar light Aluminium Poly Powder Coated Black & White Tempered glass IP Rating: IP54
160
56 87
IMAGE
IMAGE
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3634T-BLK
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3634T-WHT
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
190
2022 • Lighting By Havit
102
180
Ø90
104
Base Width = 61mm
Savannah Aluminium • • • •
IP54
INDOOR/OUTDOOR WEATHERPROOF
Up & Down wall light Aluminium Poly Powder Coated Black and White Tempered glass IP Rating: IP54
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
191
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3635T-BLK
3000K 4000K 5500K
2x 225lm 2x 230lm 2x 235lm
240v
Tri-Colour Built-in 2x 4.5w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3635T-WHT
3000K 4000K 5500K
2x 225lm 2x 230lm 2x 235lm
240v
Tri-Colour Built-in 2x 4.5w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
Nikki Aluminium • • • •
Up & Down wall light Aluminium Poly Powder Coated Black and White Tempered glass IP Rating: IP54
91
76
185
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3637T-BLK
3000K 4000K 5500K
2x 375lm 2x 400lm 2x 425lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3637T-WHT
3000K 4000K 5500K
2x 375lm 2x 400lm 2x 425lm
240v
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 10w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
192
2022 • Lighting By Havit Blokk Aluminium • • • •
90
Up & Down wall light Aluminium Poly Powder Coated Black or White Frosted tempered glass IP Rating: IP54
44
65
26
45
26
45
65 61
180 44
65
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K
71
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
193
155
PART NUMBER
COLOUR TEMP
LUMENS
HV3638C-BLK
5500K
2x 210lm
INPUT
INCLUDED LED
240v
Built-in 2x 3w LED
HV3638W-BLK
3000K
2x 200lm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3639T-BLK
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 320lm
240v
Tri-Colour Built-in 2x 4.5w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3638C-WHT
5500K
2x 210lm 240v
Built-in 2x 3w LED
HV3638W-WHT
3000K
2x 200lm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3639T-WHT
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 320lm
240v
Tri-Colour Built-in 2x 4.5w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights HV3638
HV3639
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
194
2022 • Lighting By Havit Lisse Aluminium Black • • • •
Slim wall light Aluminium Poly Powder Coated Black Tempered glass IP Rating: IP54
RGBW Tri-Colour By Havit
IP54
3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K
+3000K
IMAGE
IMAGE
IMAGE
IMAGE
5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3641T-BLK-240V
3000K 4000K 5500K
240lm 250lm 260lm
240v
Tri-Colour Built-in 4w LED
HV3641T-BLK-12V
3000K 4000K 5500K
240lm 250lm 260lm
12v DC
Tri-Colour Built-in 4w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3642T-BLK-240V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
240v
Tri-Colour Built-in 2x 3w LED
HV3642T-BLK-12V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
12v DC
Tri-Colour Built-in 2x 3w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3643T-BLK-240V
3000K 4000K 5500K
360lm 375lm 390lm
240v
Tri-Colour Built-in 6w LED
HV3643T-BLK-12V
3000K 4000K 5500K
360lm 375lm 390lm
12v DC
Tri-Colour Built-in 6w LED
HV3643RGBW-BLK
RGB + 3000K
160lm (3000k)
12v DC
RGBW Built-in 6w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3644T-BLK-240V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
240v
Tri-Colour Built-in 2x 5w LED
HV3644T-BLK-12V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
12v DC
Tri-Colour Built-in 2x 5w LED
HV3644RGBW-BLK
RGB + 3000K
2x 180lm (3000k)
12v DC
RGBW Built-in 2x5w LED
INCLUDED LED
INCLUDED LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue.
195
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down HV3641T-BLK
Fixed Down HV3643T-BLK
115
175
76
76
28
28
Up & Down HV3642T-BLK
Up & Down HV3644T-BLK 175
115
90
28
90
28
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
196
2022 • Lighting By Havit Lisse Aluminium White • • • •
Slim wall light Aluminium Poly Powder Coated White Tempered glass IP Rating: IP54
RGBW Tri-Colour By Havit
IMAGE
IMAGE
IMAGE
INDOOR/OUTDOOR WEATHERPROOF
4000K
+3000K
IMAGE
IP54
3000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3641T-WHT-240V
3000K 4000K 5500K
240lm 250lm 260lm
240v
Tri-Colour Built-in 4w LED
HV3641T-WHT-12V
3000K 4000K 5500K
240lm 250lm 260lm
12v DC
Tri-Colour Built-in 4w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3642T-WHT-240V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
240v
Tri-Colour Built-in 2x 3w LED
HV3642T-WHT-12V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
12v DC
Tri-Colour Built-in 2x 3w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3643T-WHT-240V
3000K 4000K 5500K
360lm 375lm 390lm
240v
Tri-Colour Built-in 6w LED
HV3643T-WHT-12V
3000K 4000K 5500K
360lm 375lm 390lm
12v DC
Tri-Colour Built-in 6w LED
HV3643RGBW-WHT
RGB + 3000K
160lm (3000k)
12v DC
RGBW Built-in 6w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3644T-WHT-240V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
240v
Tri-Colour Built-in 2x 5w LED
HV3644T-WHT-12V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
12v DC
Tri-Colour Built-in 2x 5w LED
HV3644RGBW-WHT
RGB + 3000K
2x 180lm (3000k)
12v DC
RGBW Built-in 2x5w LED
INCLUDED LED
INCLUDED LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue.
197
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down HV3641T-WHT 115
Fixed Down HV3643T-WHT 175
76
76
28
28
Up & Down HV3642T-WHT
Up & Down HV3644T-WHT 175
115
90
28
90
28
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
198
2022 • Lighting By Havit Essil Aluminium Black • • • •
Slim wall light Aluminium Poly Powder Coated Black Tempered glass IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3645T-BLK-240V
3000K 4000K 5500K
240lm 250lm 260lm
240v
Tri-Colour Built-in 4w LED
HV3645T-BLK-12V
3000K 4000K 5500K
240lm 250lm 260lm
12v DC
Tri-Colour Built-in 4w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3646T-BLK-240V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
240v
Tri-Colour Built-in 2x 3w LED
HV3646T-BLK-12V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
12v DC
Tri-Colour Built-in 2x 3w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3647T-BLK-240V
3000K 4000K 5500K
360lm 375lm 390lm
240v
Tri-Colour Built-in 6w LED
HV3647T-BLK-12V
3000K 4000K 5500K
360lm 375lm 390lm
12v DC
Tri-Colour Built-in 6w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3648T-BLK-240V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
240v
Tri-Colour Built-in 2x 5w LED
HV3648T-BLK-12V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
12v DC
Tri-Colour Built-in 2x 5w LED
INCLUDED LED
INCLUDED LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
199
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down HV3645T-BLK 115
Fixed Down HV3647T-BLK 175 76
76
28
28
Up & Down HV3646T-BLK
Up & Down HV3648T-BLK 175
115
90
28
90
28
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
200
2022 • Lighting By Havit Essil Aluminium White • • • •
Slim wall light Aluminium Poly Powder Coated White Tempered glass IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3645T-WHT-240V
3000K 4000K 5500K
240lm 250lm 260lm
240v
Tri-Colour Built-in 4w LED
HV3645T-WHT-12V
3000K 4000K 5500K
240lm 250lm 260lm
12v DC
Tri-Colour Built-in 4w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3646T-WHT-240V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
240v
Tri-Colour Built-in 2x 3w LED
HV3646T-WHT-12V
3000K 4000K 5500K
2x 180lm 2x 187lm 2x 195lm
12v DC
Tri-Colour Built-in 2x 3w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3647T-WHT-240V
3000K 4000K 5500K
360lm 375lm 390lm
240v
Tri-Colour Built-in 6w LED
HV3647T-WHT-12V
3000K 4000K 5500K
360lm 375lm 390lm
12v DC
Tri-Colour Built-in 6w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3648T-WHT-240V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
240v
Tri-Colour Built-in 2x 5w LED
HV3648T-WHT-12V
3000K 4000K 5500K
2x 300lm 2x 310lm 2x 325lm
12v DC
Tri-Colour Built-in 2x 5w LED
INCLUDED LED
INCLUDED LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
201
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down HV3645T-WHT 115
Fixed Down HV3647T-WHT 175 76
76
28
28
Up & Down HV3646T-WHT
Up & Down HV3648T-WHT 175
115
90
28
90
28
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
202
2022 • Lighting By Havit
95 28
210
Essil Aluminium • • • •
Up & Down LED Wall Light Aluminium Poly Powder Coated Black and White Triac Dimmable (240v Model only) IP Rating: IP54 IMAGE
IMAGE
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3649T-BLK-240V
3000K 4000K 5500K
2x 350lm 2x 360lm 2x 370lm
240v
Tri-Colour 2x 6w Built in LED
HV3649T-BLK-12V
3000K 4000K 5500K
2x 350lm 2x 360lm 2x 370lm
12v DC
Tri-Colour 2x 6w Built in LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3649T-WHT-240V
3000K 4000K 5500K
2x 350lm 2x 360lm 2x 370lm
240v
Tri-Colour 2x 6w Built in LED
HV3649T-WHT-12V
3000K 4000K 5500K
2x 350lm 2x 360lm 2x 370lm
12v DC
Tri-Colour 2x 6w Built in LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
203
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Cono Aluminium
170
• Up & Down wall light • Aluminium Poly Powder Coated Black and White • IP Rating: IP54 IMAGE
IMAGE
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
83
5500K
48
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3651T-BLK
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3651T-WHT
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
4000K
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
Lighting by Havit 204
www.havit.com.au
2022 • Lighting By Havit Lisse Aluminium • • • •
Outdoor Wall Light Aluminium Poly Powder Coated Black or White Frosted Tempered Glass IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3652T-BLK-240V
3000K 4000K 5500K
475lm 560lm 515lm
240v
Tri-Colour Built-in 12w LED
HV3652T-BLK-12V
3000K 4000K 5500K
475lm 560lm 515lm
12v DC
Tri-Colour Built-in 12w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3652T-WHT-240V
3000K 4000K 5500K
475lm 560lm 515lm
240v
Tri-Colour Built-in 12w LED
HV3652T-WHT-12V
3000K 4000K 5500K
475lm 560lm 515lm
12v DC
Tri-Colour Built-in 12w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3653T-BLK-240V
3000K 4000K 5500K
2x 475lm 2x 560lm 2x 515lm
240v
Tri-Colour Built-in 2x 12w LED
HV3653T-BLK-12V
3000K 4000K 5500K
2x 475lm 2x 560lm 2x 515lm
12v DC
Tri-Colour Built-in 2x 12w LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3653T-WHT-240V
3000K 4000K 5500K
2x 475lm 2x 560lm 2x 515lm
240v
Tri-Colour Built-in 2x 12w LED
HV3653T-WHT-12V
3000K 4000K 5500K
2x 475lm 2x 560lm 2x 515lm
12v DC
Tri-Colour Built-in 2x 12w LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
205
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Fixed Down HV3652T-BLK 250
Fixed Down HV3652T-WHT 250
82
82
30
30
Up & Down HV3653T-BLK 250
Up & Down HV3653T-WHT 250
100
100
30
30
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
206
2022 • Lighting By Havit
100
Versa Aluminium • • • •
137
Up & Down LED Wall Light Aluminium Poly Powder Coated Black and White Adjustable beam angle IP Rating: IP65 IMAGE
IMAGE
207
IP65
INDOOR/OUTDOOR WEATHERPROOF
120
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3658T-BLK-RND
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3658T-WHT-RND
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
100
Versa Aluminium • • • •
100
Up & Down LED Wall Light Aluminium Poly Powder Coated Black and White Adjustable beam angle IP Rating: IP65 IMAGE
IMAGE
IP65
INDOOR/OUTDOOR WEATHERPROOF
100
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3658T-BLK-SQ
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3658T-WHT-SQ
3000K 4000K 5500K
2x 220lm 2x 230lm 2x 240lm
240v
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
INCLUDED LED
Tri-Colour Built-in 2x 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
208
2022 • Lighting By Havit Bayside 316 Stainless Steel • • • • •
113
Outdoor Wall Light 316 Stainless Steel, 316 Stainless Steel Poly Powder Coated Black or White Tempered Glass Supplied with LED Filament Globe IP Rating: IP54
110
235
IP54
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3659W-SS316
2700k
800lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3659W-BLK
2700k
800lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3659W-WHT
2700k
800lm
240v
INCLUDED LED
8w E27 LED
INCLUDED LED
8w E27 LED
INCLUDED LED
8w E27 LED
HAVIT COMPATIBLE ACCESSORIES
209
HV9569C
8w E27 5500K LED Filament Globe
HV9569N
8w E27 4000K LED Filament Globe All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
316 Stainless Steel
316 Stainless Steel Poly Powder Coated Black
316 Stainless Steel Poly Powder Coated White
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
210
2022 • Lighting By Havit
180
35
108
88
121
Luxe Aluminium • LED wall light • Aluminium Poly Powder Coated Black and White • IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
211
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3661T-BLK
3000K 4000K 5500K
400lm 425lm 450lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3661T-WHT
3000K 4000K 5500K
400lm 425lm 450lm
240v
INCLUDED LED Tri-Colour Built-in 9w LED INCLUDED LED Tri-Colour Built-in 9w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
190
110
80
Mia Aluminium • LED wall light • Aluminium Poly Powder Coated Black and White • IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3665T-BLK
3000K 4000K 5500K
400lm 425lm 450lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3665T-WHT
3000K 4000K 5500K
400lm 425lm 450lm
240v
INCLUDED LED Tri-Colour Built-in 9w LED INCLUDED LED Tri-Colour Built-in 9w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
212
2022 • Lighting By Havit
Pivot
60
• Exterior Wall Light • Aluminium Poly Powder Coated
300°Swivel
White or Black • Polycarbonate Opal Diffuser • IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
Ø140
4000K 5500K
IMAGE
IMAGE
213
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3666T-BLK
3000K 4000K 5500K
380lm 460lm 430lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3666T-WHT
3000K 4000K 5500K
380lm 460lm 430lm
240v
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 10w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
300°Swivel
Pivot • Exterior Wall Light • Aluminium Poly Powder Coated
140
White or Black • Polycarbonate Opal Diffuser • IP Rating: IP54 IMAGE
IMAGE
140
IP54
56
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3667T-BLK
3000K 4000K 5500K
380lm 460lm 430lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3667T-WHT
3000K 4000K 5500K
380lm 460lm 430lm
240v
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 10w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
214
2022 • Lighting By Havit
Nepean • Exterior Wall Light • Aluminium Poly Powder Coated White or Black
• Polycarbonate Opal Diffuser • IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
215
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3668T-BLK
3000K 4000K 5500K
1180lm 1320lm 1240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3668T-WHT
3000K 4000K 5500K
1180lm 1320lm 1240lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Jasper
100
• Exterior Wall Light • Aluminium Poly Powder Coated
250
White or Black • Polycarbonate Opal Diffuser • IP Rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
110
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3669T-BLK
3000K 4000K 5500K
1180lm 1320lm 1240lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3669T-WHT
3000K 4000K 5500K
1180lm 1320lm 1240lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
216
2022 • Lighting By Havit
90 90
Ø300Ø300
90
Ø300
90
Ø300
Stor Aluminium Black • • • •
Bunker wall lights Aluminium Poly Powder Coated Black Polycarbonate Opal Diffuser IP Rating: IP54 IMAGE
IMAGE
217
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3670T-BLK
3000K 4000K 5500K
2250lm 2325lm 2400lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3671T-BLK
3000K 4000K 5500K
2050lm 2125lm 2250lm
240v
INCLUDED LED
Tri-Colour Built-in 30w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
Ø183
66
Ø183
66
Roto Aluminium Black • • • •
Exterior Wall Light Aluminum Poly Powder Coated Black Polycarbonate Opal Diffuser IP rating: IP54 IMAGE
IMAGE
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36003T-BLK
3000K 4000K 5500K
520lm 600lm 570lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36012T-BLK
3000K 4000K 5500K
360lm 410lm 390lm
240v
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 10w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
218
2022 • Lighting By Havit Liptor Aluminium Black • • • •
Exterior Oyster Light Aluminum Poly Powder Coated Black Polycarbonate Opal Cover IP rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
219
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36051T-BLK
3000K 4000K 5500K
440lm 480lm 450lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36052T-BLK
3000K 4000K 5500K
1130lm 1360lm 1310lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36053T-BLK
3000K 4000K 5500K
1320lm 1600lm 1490lm
240V
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
HV36051T-BLK
HV36052T-BLK
HV36053T-BLK
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
220
2022 • Lighting By Havit Liptor Aluminium White • • • •
Exterior Oyster Light Aluminum Poly Powder Coated White Polycarbonate Opal Cover IP rating: IP54
IP54
Tri-Colour By Havit 3000K
INDOOR/OUTDOOR WEATHERPROOF
4000K 5500K
IMAGE
IMAGE
IMAGE
221
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36051T-WHT
3000K 4000K 5500K
440lm 480lm 450lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36052T-WHT
3000K 4000K 5500K
1130lm 1360lm 1310lm
240V
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV36053T-WHT
3000K 4000K 5500K
1320lm 1600lm 1490lm
240V
INCLUDED LED
Tri-Colour Built-in 10w LED
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
HV36051T-WHT
HV36052T-WHT
HV36053T-WHT
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
222
2022 • Lighting By Havit
223
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Flood Lights
50W
30W
39
10W 39
39
130
250
203
98
158
188
Aray Aluminium Black • • • • •
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
IMAGE
IMAGE
LED floodlight Aluminium Poly Powder Coated Black Supplied with flex and plug 180° beam angle IP Rating: IP65
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3726C
4000K
850lm
240v
Built-in 10w SMD
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3728C
4000K
2550lm
240v
Built-in 30w SMD
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV3729C
4000K
4250lm
240v
Built-in 50w SMD
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
224
2022 • Lighting By Havit Revo Aluminium Black • • • •
Single & Double Adjustable wall light Aluminium poly powder coated black Tempered glass IP Rating: IP65
Revo Sensor Aluminium Black • • • • • • • •
Double Adjustable wall light Aluminium poly powder coated black 120° Sensor detection Lux and time settings on sensor Up to 10 metre detection range Manual override function Tempered glass IP Rating: IP65 IMAGE
IMAGE
IMAGE
225
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3681T-BLK
3000K 4000K 5500K
810lm 850lm 900lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3683T-BLK
3000K 4000K 5500K
2x 810lm 2x 850lm 2x 900lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3684T-BLK
3000K 4000K 5500K
2x 810lm 2x 850lm 2x 900lm
240v
INCLUDED LED
Tri-Colour Built-in 9w
INCLUDED LED
Tri-Colour Built-in 2x 9w
INCLUDED LED
Tri-Colour Built-in 2x 9w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
270º Swivel
90º Tilt
Single Adjustable HV3681T-BLK
270º Swivel 90º Tilt
Double Adjustable HV3683T-BLK
270º Swivel 90º Tilt
Sensor Double Adjustable HV3684T-BLK All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
226
2022 • Lighting By Havit Revo Aluminium White • • • •
Single & Double Adjustable wall light Aluminium poly powder coated white Tempered glass IP Rating: IP65
Revo Sensor Aluminium White • • • • • • • •
Double Adjustable wall light Aluminium poly powder coated white 120° Sensor detection Lux and time settings on sensor Up to 10 metre detection range Manual override function Tempered glass IP Rating: IP65 IMAGE
IMAGE
IMAGE
227
IP65
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3681T-WHT
3000K 4000K 5500K
810lm 850lm 900lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3683T-WHT
3000K 4000K 5500K
2x 810lm 2x 850lm 2x 900lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV3684T-WHT
3000K 4000K 5500K
2x 810lm 2x 850lm 2x 900lm
240v
INCLUDED LED
Tri-Colour Built-in 9w
INCLUDED LED
Tri-Colour Built-in 2x 9w
INCLUDED LED
Tri-Colour Built-in 2x 9w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Wall Lights
270º Swivel
90º Tilt
Single Adjustable HV3681T-WHT
270º Swivel 90º Tilt
Double Adjustable HV3683T-WHT
270º Swivel 90º Tilt
Sensor Double Adjustable HV3684T-WHT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
228
2022 • Lighting By Havit Tivah Aluminium Black • • • • •
Bar width 50mm
350 25
180
Adjustable spotlights Aluminium Poly Powder Coated Black 90˚ tilt & 270˚ swivel High output reflector to maximise light IP Rating: IP54
110
60
90º Tilt / 270º Swivel on all heads
Bar width 50mm
550 25
180 110
60
90º Tilt / 270º Swivel on all heads
250
250
Bar width 50mm
750
25
182
IP54
180
110
INDOOR/OUTDOOR WEATHERPROOF
90º Tilt / 270º Swivel
60
60
on all heads
Tri-Colour By Havit
188
3000K
110
182
Ø240
250
110
4000K Ø60
90º Tilt / 270º Swivel on all heads
5500K
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
60
90º Tilt / 270º Swivel on all heads
250
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-2-BLK
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-BLK
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-BLK
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-BLK-RND
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-BLK-SQ
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED
HAVIT COMPATIBLE ACCESSORIES GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
229
HV9506D
3000K 4000K 5500K
240lm-630lm
240v
Tri-Colour 3W/5W/7W
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Adjustable Bar Lights
2 light bar
3 light bar
4 light bar
3 light round plate
4 light square plate
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
230
2022 • Lighting By Havit Tivah Aluminium White • • • • •
Bar width 50mm
350 25
180
Adjustable spotlights Aluminium Poly Powder Coated White 90˚ tilt & 270˚ swivel High output reflector to maximise light IP Rating: IP54
110
60
90º Tilt / 270º Swivel on all heads
Bar width 50mm
550 25
180 110
60
90º Tilt / 270º Swivel on all heads
250
250
Bar width 50mm
750
25
182
IP54
180
110
INDOOR/OUTDOOR WEATHERPROOF
90º Tilt / 270º Swivel
60
60
on all heads
Tri-Colour By Havit
188
3000K
110
182
Ø240
250
110
4000K Ø60
90º Tilt / 270º Swivel on all heads
5500K
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
60
90º Tilt / 270º Swivel on all heads
250
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-2-WHT
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-WHT
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-WHT
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-WHT-RND
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-WHT-SQ
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED
HAVIT COMPATIBLE ACCESSORIES GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
231
HV9506D
3000K 4000K 5500K
240lm-630lm
240v
Tri-Colour 3W/5W/7W
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Adjustable Bar Lights
2 light bar
3 light bar
4 light bar
3 light round plate
4 light square plate
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
232
2022 • Lighting By Havit Tivah Titanium Aluminum • • • • •
Bar width 50mm
350 25
180
Adjustable spotlights Titanium Coloured Aluminium 90˚ tilt & 270˚ swivel High output reflector to maximise light IP Rating: IP54
110
60
90º Tilt / 270º Swivel on all heads
Bar width 50mm
550 25
180 110
60
90º Tilt / 270º Swivel on all heads
250
250
Bar width 50mm
750
25
182
IP54
180
110
INDOOR/OUTDOOR WEATHERPROOF
90º Tilt / 270º Swivel
60
60
on all heads
Tri-Colour By Havit
188
3000K
110
182
Ø240
250
110
4000K Ø60
90º Tilt / 270º Swivel on all heads
5500K
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
60
90º Tilt / 270º Swivel on all heads
250
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-2-TTM
3000K 4000K 5500K
2x 270lm 2x 285lm 2x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-TTM
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-TTM
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-3-TTM-RND
3000K 4000K 5500K
3x 270lm 3x 285lm 3x 300lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV4001T-4-TTM-SQ
3000K 4000K 5500K
4x 270lm 4x 285lm 4x 300lm
240v
INCLUDED LED Tri-Colour 2x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED INCLUDED LED Tri-Colour 3x 5w GU10 LED INCLUDED LED Tri-Colour 4x 5w GU10 LED
HAVIT COMPATIBLE ACCESSORIES GU10 Models are compatible with Havit Tri-Colour 9in1 Globes
233
HV9506D
3000K 4000K 5500K
240lm-630lm
240v
Tri-Colour 3W/5W/7W
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Adjustable Bar Lights
2 light bar
3 light bar
4 light bar
3 light round plate
4 light square plate
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
234
2022 • Lighting By Havit Revo Aluminum Black • • • • •
Adjustable spotlights Aluminium Poly Powder Coated Black Triac Dimmable 45° Beam Angle IP20
Ø75mm
Bar width 55mm
350
30
30
160
110
160
110 55
110
55
55
90º Tilt / 270º Swivel on all heads
90º Tilt / 270º Swivel
Bar width 55mm
600 30
160
110
110
55
55
90º Tilt / 270º Swivel on all heads
Bar width 55mm
900 30
160
110
IP20
55
55
90º Tilt / 270º Swivel on all heads
INDOOR USE ONLY
30
Tri-Colour By Havit
160
110
3000K 4000K
Ø220
55
5500K
90º Tilt / 270º Swivel on all heads
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
235
110
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-1-BLK
3000K 4000K 5500K
640lm 680lm 720lm
240v
Tri-Colour Built in 8w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-2-BLK
3000K 4000K 5500K
2x 640lm 2x 680lm 2x 720lm
240v
Tri-Colour Built in 2x 8w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-3-BLK
3000K 4000K 5500K
3x 640lm 3x 680lm 3x 720lm
240v
Tri-Colour Built in 3x 8w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-4-BLK
3000K 4000K 5500K
4x 640lm 4x 680lm 4x 720lm
240v
Tri-Colour Built in 4x 8w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-3-BLK-RND
3000K 4000K 5500K
3x 640lm 3x 680lm 3x 720lm
240v
Tri-Colour Built in 3x 8w SMD LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Adjustable Bar Lights
2 light bar 1 light round plate
3 light bar
4 light bar
3 light round plate
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
236
2022 • Lighting By Havit Revo Aluminum White • • • • •
Adjustable spotlights Aluminium Poly Powder Coated White Triac Dimmable 45° Beam Angle IP20
Ø75mm
Bar width 55mm
350
30
30
160
110
160
110 55
110
55
55
90º Tilt / 270º Swivel on all heads
90º Tilt / 270º Swivel
Bar width 55mm
600 30
160
110
110
55
55
90º Tilt / 270º Swivel on all heads
Bar width 55mm
900 30
160
110
IP20
55
55
90º Tilt / 270º Swivel on all heads
INDOOR USE ONLY
30
Tri-Colour By Havit
160
110
3000K 4000K
Ø220
55
5500K
90º Tilt / 270º Swivel on all heads
IMAGE
IMAGE
IMAGE
IMAGE
IMAGE
237
110
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-1-WHT
3000K 4000K 5500K
640lm 680lm 720lm
240v
Tri-Colour Built in 8w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-2-WHT
3000K 4000K 5500K
2x 640lm 2x 680lm 2x 720lm
240v
Tri-Colour Built in 2x 8w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-3-WHT
3000K 4000K 5500K
3x 640lm 3x 680lm 3x 720lm
240v
Tri-Colour Built in 3x 8w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-4-WHT
3000K 4000K 5500K
4x 640lm 4x 680lm 4x 720lm
240v
Tri-Colour Built in 4x 8w SMD LED
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV4002T-3-WHT-RND
3000K 4000K 5500K
3x 640lm 3x 680lm 3x 720lm
240v
Tri-Colour Built in 3x 8w SMD LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Adjustable Bar Lights
2 light bar 1 light round plate
3 light bar
4 light bar
3 light round plate
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
238
2022 • Lighting By Havit HV5511T-BLK
HV5512T-BLK
Cut out ~ ø90mm
Cut out ~ Ø70mm
70
70
Ø88mm
Ø88mm
ø105mm
ø105mm 20° Tilt
20° Tilt
Prime Aluminium Black • • • • • • • •
Dimmable LED downlights Aluminium Black Aluminium Heat Sink Supplied with dimmable driver complete with flex & plug 60˚ beam angle CRI>90 IC-4 Rated (fitting only) IP Rating: IP54 (front only) IMAGE
IMAGE
239
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5511T-BLK
70mm
3000K 4000K 5500K
839lm 913lm 841lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5512T-BLK
90mm
3000K 4000K 5500K
839lm 913lm 841lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Recessed Downlights HV5513T-BLK
HV5514T-BLK
Cut out ~ ø76mm
Cut out ~ ø90mm
95
95 37
37
ø84mm
ø84mm
ø105mm
IP54
INDOOR/OUTDOOR WEATHERPROOF
ø105mm
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5513T-BLK
76mm
3000K 4000K 5500K
839lm 913lm 841lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5514T-BLK
90mm
3000K 4000K 5500K
839lm 913lm 841lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
240
2022 • Lighting By Havit HV5511T-WHT
HV5512T-WHT
Cut out ~ ø90mm
Cut out ~ Ø70mm
70
70
Ø88mm
Ø88mm
ø105mm
ø105mm 20° Tilt
20° Tilt
Prime Aluminium White • • • • • • • •
Dimmable LED downlights Aluminium White Aluminium Heat Sink Supplied with dimmable driver complete with flex & plug 60˚ beam angle CRI>90 IC-4 Rated (fitting only) IP Rating: IP54 (front only) IMAGE
IMAGE
INDOOR/OUTDOOR WEATHERPROOF
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5511T-WHT
70mm
3000K 4000K 5500K
839lm 913lm 841lm
240v
COLOUR TEMP
LUMENS
INPUT
3000K 4000K 5500K
839lm 913lm 841lm
240v
PART NUMBER
90mm
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
HV5512T-WHT
241
IP54
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Recessed Downlights HV5513T-WHT
HV5514T-WHT
Cut out ~ ø90mm
Cut out ~ ø76mm
95
95 37
37
ø84mm
ø84mm
ø105mm
IP54
INDOOR/OUTDOOR WEATHERPROOF
ø105mm
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5513T-WHT
76mm
3000K 4000K 5500K
839lm 913lm 841lm
240v
COLOUR TEMP
LUMENS
INPUT
3000K 4000K 5500K
839lm 913lm 841lm
240v
PART NUMBER
HV5514T-WHT
90mm
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
242
2022 • Lighting By Havit
Polly LED Downlight • • • • • • • •
Fixed round LED downlight Polycarbonate matt black or white finish Integrated Triac Dimmable Driver Supplied with flex & plug Cut out: 90mm 120° beam angle IC-4 rated IP Rating: IP54 (front only) IMAGE
PART NUMBER
CUT OUT = Ø90mm
CUT OUT
48
INDOOR/OUTDOOR WEATHERPROOF
Ø110
COLOUR TEMP
IP54
Tri-Colour By Havit 3000K 4000K 5500K
LUMENS
INPUT
INCLUDED LED
Ø110
IMAGE
243
HV5522T-BLK
90mm
3000K 4000K 5500K
635lm 750lm 715lm
240v
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5522T-WHT
90mm
3000K 4000K 5500K
635lm 750lm 715lm
240v
Tri-Colour Built-in 8w LED
INCLUDED LED
Tri-Colour Built-in 8w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Recessed Downlights
Gleam LED Downlight • • • • • • • •
70
Fixed round LED downlight Polycarbonate matt black or white finish Aluminium heat sink Dimmable LED driver with flex and plug Cut out: 90mm 90° beam angle IC-4 rated when used with IC-4 Cap IP Rating: IP54 (front only) IMAGE
IMAGE
Ø100
CUT OUT = Ø90mm
OPTIONAL IC4 CAP 60mm
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
Ø100mm
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV5528T-BLK
90mm
3000K 4000K 5500K
680lm 795lm 745lm
240v
Tri-Colour Built-in 9w LED
HV5528D2W-BLK
90mm
1800K-3000K
685lm
240v
Dim to Warm Built-in 9w LED
PART NUMBER
CUT OUT
COLOUR TEMP
LUMENS
INPUT
HV5528T-WHT
90mm
3000K 4000K 5500K
680lm 795lm 745lm
240v
Tri-Colour Built-in 9w LED
HV5528D2W-WHT
90mm
1800K-3000K
685lm
240v
Dim to Warm Built-in 9w LED
INCLUDED LED
HAVIT COMPATIBLE ACCESSORIES
HV5528-IC4CAP
To be used with HV5528 Models to provide IC-4 rating
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
244
2022 • Lighting By Havit
Cut out ~ Ø90mm
54
Ora 316 Stainless Steel • • • • • • • •
Fixed round LED downlight Stainless Steel 316 Marine Grade cover Aluminium Heat Sink Supplied with dimmable driver complete with flex & plug Cut out: 90mm 60˚ beam angle IC-4 Rated (fitting only) IP Rating: IP54 (front only) IMAGE
245
Ø106mm
ø1
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5530T-SS316
3000K 4000K 5500K
980lm 990lm 1000lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
All low All voltage low voltage products products that that specify specify an input an input of 12v of or 12v 24v or DC 24vmust DC must be used be used withwith a suitable a suitable LED LED driver, driver, referrefer to pages to pages 315 -315 324- 324 Lumen output measured at source. All globes supplied fittings are non dimmable. you require dimmable globes to page 418 & 420 Lumen output measured at source. All globes supplied withwith fittings are non dimmable. If youIf require 240v240v dimmable globes referrefer to page 418 & 420
www.havit.com.au
Recessed Downlights
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
246
2022 • Lighting By Havit
Cut Out = 90mm
90
Ora Aluminium • • • • • • • •
43
Fixed round LED downlight Aluminium Black or White Aluminium heat sink Supplied with dimmable driver complete with flex & plug Cut out: 90mm 90˚ beam angle IC-4 Rated (fitting only) IP Rating: IP54 (front only) IMAGE
IMAGE
247
Ø110
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5530T-BLK
3000K 4000K 5500K
776lm 905lm 845lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5530T-WHT
3000K 4000K 5500K
776lm 905lm 845lm
240v
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Recessed Downlights
Ø90mm Cut Out Ø90
Ora Aluminium • • • • • • • •
49
Fixed round LED downlight Aluminium Powder Coated Black or White Aluminium Heat Sink Supplied with Dimmable LED Driver Semi frosted lens Cut Out: 90mm 40° Beam Angle IP54 (Front only)
2.5
Ø110 5700K
IP54
INDOOR/OUTDOOR WEATHERPROOF
5000K
2700K
5C By Havit
3000K
4000K
FIVE COLOUR
IMAGE
IMAGE
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5531T-BLK
2700k 3000k 4000k 5000k 5700k
952lm 973lm 1072lm 1019lm 1135lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5531T-WHT
2700k 3000k 4000k 5000k 5700k
952lm 973lm 1072lm 1019lm 1135lm
240v
INCLUDED LED
Five-Colour Built-in 13w LED
INCLUDED LED
Five-Colour Built-in 13w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
248
2022 • Lighting By Havit
Niche Aluminium • • • • • • • •
Mini square LED downlight Aluminium Black or White Aluminium Heat Sink Supplied with LED driver complete with flex and plug Cut out: 38mm 41 45˚ beam angle IC-4 Rated (fitting only) IP Rating: IP54 IMAGE
IMAGE
249
Cutout Ø38mm 15
IP54
23 46x46
PART NUMBER
COLOUR TEMP
LUMENS
HV5701C-BLK
5500K
270lm
HV5701N-BLK
4000K
265lm
HV5701W-BLK
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV5701C-WHT
5500K
270lm
HV5701N-WHT
4000K
265lm
HV5701W-WHT
3000K
240lm
INDOOR/OUTDOOR WEATHERPROOF
3
INPUT
240v
INPUT
240v
INCLUDED LED
Built-in 3w LED
INCLUDED LED
Built-in 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Recessed Downlights
Niche Aluminium • • • • • • • •
Mini round LED downlight Aluminium Black or White Aluminium Heat Sink Supplied with LED driver complete with flex and plug Cut out: 38mm 45˚ beam angle IC-4 Rated (fitting only) IP Rating: IP54 IMAGE
IMAGE
Cutout Ø38mm 15 41
23 Ø46
PART NUMBER
COLOUR TEMP
LUMENS
HV5702C-BLK
5500K
270lm
HV5702N-BLK
4000K
265lm
HV5702W-BLK
3000K
240lm
PART NUMBER
COLOUR TEMP
LUMENS
HV5702C-WHT
5500K
270lm
HV5702N-WHT
4000K
265lm
HV5702W-WHT
3000K
240lm
IP54
INDOOR/OUTDOOR WEATHERPROOF
3
INPUT
240v
INPUT
240v
INCLUDED LED
Built-in 3w LED
INCLUDED LED
Built-in 3w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
250
2022 • Lighting By Havit
Nella Aluminium Black • • • • •
Surface mounted round downlight Aluminium Powder Coated Black Triac Dimmable 120˚ beam angle IP Rating: IP54 IMAGE
IMAGE
IMAGE
251
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-BLK
3000K 4000K 5500K
525lm 560lm 540lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-BLK
3000K 4000K 5500K
995lm 1125lm 1050lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-BLK
3000K 4000K 5500K
1380lm 1430lm 1305lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
75 65
65
Ø75
HV5802T-BLK
113 75
103
Ø113
HV5803T-BLK
157 85
147
Ø157
HV5805T-BLK All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
252
2022 • Lighting By Havit
Nella Aluminium Black • • • • •
Surface mounted round downlight with extension Aluminium Powder Coated Black Triac Dimmable 120˚ beam angle IP Rating: IP54 IMAGE
IMAGE
IMAGE
253
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-BLK-EXT
3000K 4000K 5500K
525lm 560lm 540lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-BLK-EXT
3000K 4000K 5500K
995lm 1125lm 1050lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-BLK-EXT
3000K 4000K 5500K
1380lm 1430lm 1305lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
75
128
65
Ø75
HV5802T-BLK-EXT
113
140
103
Ø113
HV5803T-BLK-EXT
157
152
147
Ø157
HV5805T-BLK-EXT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
254
2022 • Lighting By Havit
Nella Aluminium Black Pendants • • • • • •
Single pendant light Aluminium Powder Coated Black Triac Dimmable 120˚ beam angle Cable length: 1500mm Adjustable IP Rating: IP20 IMAGE
IMAGE
IMAGE
255
IP20 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-BLK-P
3000K 4000K 5500K
525lm 560lm 540lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-BLK-P
3000K 4000K 5500K
995lm 1125lm 1050lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-BLK-P
3000K 4000K 5500K
1380lm 1430lm 1305lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5802T-BLK-P
HV5803T-BLK-P
HV5805T-BLK-P 70 28
70 28
70 28
103 65
147 145
153
125
Ø75 75
Ø113
113
Ø157
157
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
256
2022 • Lighting By Havit
Nella Aluminium White • • • • •
Surface mounted round downlight Aluminium Powder Coated White Triac Dimmable 120˚ beam angle IP Rating: IP54 IMAGE
IMAGE
IMAGE
257
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-WHT
3000K 4000K 5500K
525lm 560lm 540lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-WHT
3000K 4000K 5500K
995lm 1125lm 1050lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-WHT
3000K 4000K 5500K
1380lm 1430lm 1305lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
75 65
65
Ø75
HV5802T-WHT
113 75
103
Ø113
HV5803T-WHT
157 85
147
Ø157
HV5805T-WHT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
258
2022 • Lighting By Havit
Nella Aluminium White • • • • •
Surface mounted round downlight with extension Aluminium Powder Coated White Triac Dimmable 120˚ beam angle IP Rating: IP54 IMAGE
IMAGE
IMAGE
259
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-WHT-EXT
3000K 4000K 5500K
525lm 560lm 540lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-WHT-EXT
3000K 4000K 5500K
995lm 1125lm 1050lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-WHT-EXT
3000K 4000K 5500K
1380lm 1430lm 1305lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants 75
128
65
Ø75
HV5802T-WHT-EXT
113
140
103
Ø113
HV5803T-WHT-EXT
157
152
147
Ø157
HV5805T-WHT-EXT All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
260
2022 • Lighting By Havit
Nella Aluminium White Pendants • • • • • •
Single pendant light Aluminium Powder Coated White Triac Dimmable 120˚ beam angle Cable length: 1500mm Adjustable IP Rating: IP20 IMAGE
IMAGE
IMAGE
261
IP20 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5802T-WHT-P
3000K 4000K 5500K
525lm 560lm 540lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5803T-WHT-P
3000K 4000K 5500K
995lm 1125lm 1050lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5805T-WHT-P
3000K 4000K 5500K
1380lm 1430lm 1305lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5802T-WHT-P
HV5803T-WHT-P
HV5805T-WHT-P 70 28
70 28
70 28
103 65
147
145
153
125
Ø75 75
Ø113
113
Ø157
157
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
262
2022 • Lighting By Havit
Nella Adjustable Aluminium Black • • • • • •
Surface mounted adjustable round downlight Aluminium Powder Coated Black Triac Dimmable 20º Tilt 60˚ beam angle IP Rating: IP40 IMAGE
IMAGE
IMAGE
263
IP40 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5812T-BLK
3000K 4000K 5500K
600lm 640lm 605lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5813T-BLK
3000K 4000K 5500K
980lm 1015lm 985lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5815T-BLK
3000K 4000K 5500K
1100lm 1120lm 1110lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5812T-BLK Ø75
102
20º Tilt
Ø75
HV5815T-BLK Ø115
150
Ø115
20º Tilt
HV5813T-BLK Ø90
120
20º Tilt Ø90 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
264
2022 • Lighting By Havit
Nella Adjustable Aluminium White • • • • • •
Surface mounted adjustable round downlight Aluminium Powder Coated White Triac Dimmable 20º Tilt 60˚ beam angle IP Rating: IP40 IMAGE
IMAGE
IMAGE
265
IP40 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5812T-WHT
3000K 4000K 5500K
600lm 640lm 605lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5813T-WHT
3000K 4000K 5500K
980lm 1015lm 985lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5815T-WHT
3000K 4000K 5500K
1100lm 1120lm 1110lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5812T-WHT Ø75
102
20º Tilt
Ø75
HV5815T-WHT Ø115
150
Ø115
20º Tilt
HV5813T-WHT Ø90
120
20º Tilt Ø90 All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
266
2022 • Lighting By Havit Nella Rotatable Aluminium • • • • • •
Ø55
Surface mounted rotatable round downlight Aluminium Powder Coated Black & White Triac Dimmable 90º Rotation 36˚ beam angle IP Rating: IP54
121 162
Ø55
HV5822T-BLK HV5822T-WHT Ø70 Ø31
Ø55
125 170
Ø70
HV5823T-BLK HV5823T-WHT Ø48
IP54 Ø70
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
267
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5822T-BLK
3000K 4000K 5500K
395lm 485lm 465lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5823T-BLK
3000K 4000K 5500K
790lm 880lm 855lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5822T-WHT
3000K 4000K 5500K
395lm 485lm 465lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5823T-WHT
3000K 4000K 5500K
790lm 880lm 855lm
240v
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
INCLUDED LED
Tri-Colour Built-in 7w LED
INCLUDED LED
Tri-Colour Built-in 12w LED
All low All voltage low voltage products products that that specify specify an input an input of 12v of or 12v 24v or DC 24vmust DC must be used be used withwith a suitable a suitable LED LED driver, driver, referrefer to pages to pages 315 -315 324- 324 Lumen Lumen output output measured measured at source. at source. All globes All globes supplied supplied withwith fittings fittings are non are non dimmable. dimmable. If youIf require you require 240v240v dimmable dimmable globes globes referrefer to page to page 418 & 418 420 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants HV5822T-BLK
HV5823T-BLK
HV5822T-WHT
HV5823T-WHT
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
268
2022 • Lighting By Havit Ø90
Nella Rotatable Aluminium • • • • • •
145
Surface mounted rotatable round downlight Aluminium Powder Coated Black & White Triac Dimmable 90º Rotation 60˚ beam angle IP Rating: IP54
199
Ø90
HV5824T-BLK HV5824T-WHT Ø110
175 239
Ø110
HV5825T-BLK HV5825T-WHT
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
269
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5824T-BLK
3000K 4000K 5500K
1415lm 1600lm 1485lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5825T-BLK
3000K 4000K 5500K
2100lm 2320lm 2270lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5824T-WHT
3000K 4000K 5500K
1415lm 1600lm 1485lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5825T-WHT
3000K 4000K 5500K
2100lm 2320lm 2270lm
240v
INCLUDED LED
Tri-Colour Built-in 18w LED
INCLUDED LED
Tri-Colour Built-in 24w LED
INCLUDED LED
Tri-Colour Built-in 18w LED
INCLUDED LED
Tri-Colour Built-in 24w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants HV5824T-BLK
HV5824T-WHT
HV5825T-BLK
HV5825T-WHT
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
270
2022 • Lighting By Havit Lexan • Surface Mounted Downlight • Polycarbonate Black or White • IP Rating: IP54
Ø95
Ø76
140
140
IP54
IMAGE
IMAGE
IMAGE
IMAGE
271
INDOOR/OUTDOOR WEATHERPROOF
Ø72
Ø90
HV5831T
HV5832T
Tri-Colour By Havit 3000K 4000K 5500K
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5831T-BLK
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5831T-WHT
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5832T-BLK
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5832T-WHT
3000K 4000K 5500K
240-560lm 255-595lm 270-630lm
240v
INCLUDED LED
9 in 1 Tri-Colour 3/5/7w GU10 LED
INCLUDED LED
9 in 1 Tri-Colour 3/5/7w GU10 LED
INCLUDED LED
9 in 1 Tri-Colour 3/5/7w GU10 LED
INCLUDED LED
9 in 1 Tri-Colour 3/5/7w GU10 LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants HV5831T-BLK
HV5831T-WHT
HV5832T-BLK
HV5832T-WHT
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
272
2022 • Lighting By Havit Nella Oyster Aluminium • • • • •
Surface mounted LED oyster Aluminium Powder Coated Black or White Triac Dimmable 120˚ beam angle IP Rating: IP54
IP54
INDOOR/OUTDOOR WEATHERPROOF
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
273
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5892T-BLK
3000K 4000K 5500K
1210lm 1345lm 1250lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5893T-BLK
3000K 4000K 5500K
2055lm 2130lm 2210lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5892T-WHT
3000K 4000K 5500K
1210lm 1345lm 1250lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5893T-WHT
3000K 4000K 5500K
2055lm 2130lm 2210lm
240v
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
HV5892T-BLK
HV5892T-WHT
58 Ø220
HV5893T-BLK
HV5893T-WHT
58 Ø320
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
274
2022 • Lighting By Havit Nella Pendant Aluminium • • • • • • •
LED Pendant Aluminium Powder Coated Black or White 2000mm Adjustable Cable Length Triac Dimmable Opal Polycarbonate Diffuser 120° Beam Angle IP Rating: IP20
IP20 INDOOR USE ONLY
Tri-Colour By Havit 3000K 4000K 5500K
IMAGE
IMAGE
IMAGE
IMAGE
275
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5892T-BLK-PDT
3000K 4000K 5500K
1210lm 1345lm 1250lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5893T-BLK-PDT
3000K 4000K 5500K
2055lm 2130lm 2210lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5892T-WHT-PDT
3000K 4000K 5500K
1210lm 1345lm 1250lm
240v
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
HV5893T-WHT-PDT
3000K 4000K 5500K
2055lm 2130lm 2210lm
240v
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
INCLUDED LED
Tri-Colour Built-in 20w LED
INCLUDED LED
Tri-Colour Built-in 30w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Surface Mounted Downlights & Pendants
Ø120
2000 Adjustable
58 Ø220
HV5892T-BLK-PDT HV5892T-WHT-PDT
Ø120
2000 Adjustable
58
Ø320
HV5893T-BLK-PDT HV5893T-WHT-PDT
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
276
2022 • Lighting By Havit Proline Custom • • • • • • • •
Single pendant light Available in Black, Silver or White 1800mm, 2400mm or 3000mm lengths Supplied with dimmable LED Driver (remote installed) 46w per metre 120˚ beam angle Cable length: 2000mm Adjustable IP Rating: IP20
28.8
70
57.6 29.3
41.2
IP20
60
Custom Made Lengths (From 4-5 days production time + delivery)
INDOOR USE ONLY
PART NUMBER
LENGTH
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV6001C-BLK-1.8
1800mm
5500K
8200lm
240v
Built-in 82w LED
HV6001N-BLK-1.8
1800mm
4000K
7860lm
240v
Built-in 82w LED
HV6001W-BLK-1.8
1800mm
3000K
7450lm
240v
Built-in 82w LED
HV6001C-BLK-2.4
2400mm
5500K
11000lm
240v
Built-in 110w LED
HV6001N-BLK-2.4
2400mm
4000K
10400lm
240v
Built-in 110w LED
HV6001W-BLK-2.4
2400mm
3000K
9900lm
240v
Built-in 110w LED
HV6001C-BLK-3.0
3000mm
5500K
13800lm
240v
Built-in 138w LED
HV6001N-BLK-3.0
3000mm
4000K
13100lm
240v
Built-in 138w LED
HV6001W-BLK-3.0
3000mm
3000K
12400lm
240v
Built-in 138w LED
PART NUMBER
LENGTH
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV6001C-SLV-1.8
1800mm
5500K
8200lm
240v
Built-in 82w LED
HV6001N-SLV-1.8
1800mm
4000K
7860lm
240v
Built-in 82w LED
HV6001W-SLV-1.8
1800mm
3000K
7450lm
240v
Built-in 82w LED
HV6001C-SLV-2.4
2400mm
5500K
11000lm
240v
Built-in 110w LED
HV6001N-SLV-2.4
2400mm
4000K
10400lm
240v
Built-in 110w LED
HV6001W-SLV-2.4
2400mm
3000K
9900lm
240v
Built-in 110w LED
HV6001C-SLV-3.0
3000mm
5500K
13800lm
240v
Built-in 138w LED
HV6001N-SLV-3.0
3000mm
4000K
13100lm
240v
Built-in 138w LED
HV6001W-SLV-3.0
3000mm
3000K
12400lm
240v
Built-in 138w LED
PART NUMBER
LENGTH
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV6001C-WHT-1.8
1800mm
5500K
8200lm
240v
Built-in 82w LED
HV6001N-WHT-1.8
1800mm
4000K
7860lm
240v
Built-in 82w LED
HV6001W-WHT-1.8
1800mm
3000K
7450lm
240v
Built-in 82w LED
HV6001C-WHT-2.4
2400mm
5500K
11000lm
240v
Built-in 110w LED
HV6001N-WHT-2.4
2400mm
4000K
10400lm
240v
Built-in 110w LED
HV6001W-WHT-2.4
2400mm
3000K
9900lm
240v
Built-in 110w LED
HV6001C-WHT-3.0
3000mm
5500K
13800lm
240v
Built-in 138w LED
HV6001N-WHT-3.0
3000mm
4000K
13100lm
240v
Built-in 138w LED
HV6001W-WHT-3.0
3000mm
3000K
12400lm
240v
Built-in 138w LED
277
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Linear Pendants
HV6001T-BLK
HV6001T-SLV
HV6001T-WHT
80x80 30
Proline • • • • • • •
IP20
2000
adjustable
Single pendant light 100 Aluminium Black, White or Silver finish Triac Dimmable 120˚ beam angle Tri-Colour By Havit Cable length: 2000mm Adjustable 3000K 4000K IP Rating: IP20 5500K Indoor use only
INDOOR USE ONLY
70 1200
60
For custom size lengths please contact sales representative for more information.
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV6001T-BLK
3000K 4000K 5500K
3800lm 3900lm 4000lm
240v
Tri-Colour Built-in 40w LED
HV6001T-SLV
3000K 4000K 5500K
3800lm 3900lm 4000lm
240v
Tri-Colour Built-in 40w LED
HV6001T-WHT
3000K 4000K 5500K
3800lm 3900lm 4000lm
240v
Tri-Colour Built-in 40w LED
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
278
2022 • Lighting By Havit Arc • • • • •
High density extra strong plaster Super bright white Easily painted to match decor IP Rating: IP20 Indoor use only
100
120
IP20 INDOOR USE ONLY
150
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8025C
5500K
130lm
240v
2w COB G9
HV8025W
3000K
120lm
240v
2w COB G9
279
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Interior Wall Lights Arc • • • • •
High density extra strong plaster Super bright white Easily painted to match decor IP Rating: IP20 Indoor use only
120mm
150mm
IP20 INDOOR USE ONLY
200mm
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8026C
5500K
240lm
240v
3w SMD E14
HV8026W
3000K
220lm
240v
3w SMD E14
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
280
2022 • Lighting By Havit Concept • • • • •
High density extra strong plaster Super bright white Easily painted to match decor IP Rating: IP20 Indoor use only
100
80
IP20
180
INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8027C
5500K
130lm
240v
2w COB G9
HV8027W
3000K
120lm
240v
2w COB G9
281
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Interior Wall Lights Concept • Aluminium black with gold insert • IP Rating: IP20 • Indoor use only
IP20 INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8028C-BLK
5500K
130lm
240v
2w G9 LED
HV8028W-BLK
3000K
120lm
240v
2w G9 LED
Concept • Aluminium white with gold insert • IP Rating: IP20 • Indoor use only
IP20 INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8028C-WHT
5500K
130lm
240v
2w COB G9
HV8028W-WHT
3000K
120lm
240v
2w COB G9
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
282
2022 • Lighting By Havit Aurora • • • • •
175
High density extra strong plaster Super bright white Easily painted to match decor IP Rating: IP20 Indoor use only
175
285
IP20
100
285
INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8030C
5500K
240lm
240v
3w SMD E14
HV8030W
3000K
220lm
240v
3w SMD E14
283
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
100
Interior Wall Lights Sunrise 150 • • • • •
High density extra strong plaster Super bright white Easily painted to match decor IP Rating: IP20 Indoor use only
150 50
IP20
100
INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8069C
5500K
130lm
240v
2w G9 LED
HV8069W
3000K
120lm
240v
2w G9 LED
Sunrise 200 • • • • •
igh density extra strong plaster H Super bright white Easily painted to match decor IP Rating: IP20 Indoor use only
200 50
IP20
100
INDOOR USE ONLY
PART NUMBER
COLOUR TEMP
LUMENS
INPUT
INCLUDED LED
HV8070C
5500K
240lm
240v
3w SMD E14
HV8070W
3000K
220lm
240v
3w SMD E14
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
284
2022 • Lighting By Havit Zigbee Wall Switch HV9101-ZB-5C
Single Coloured Zigbee LED Touch Panel HV9101-ZB-SCTP
RGBW Zigbee LED Touch Panel HV9101-ZB-RGBWTP
55
55
11
44 20
120
44
20
66 83 120
83 66 AC POWER INPUT L
IP20
L
N
AC POWER INPUT
N
L
L
N
N
INDOOR USE ONLY
75
IMAGE
PART NUMBER
DESCRIPTION
HV9101-ZB-5C
• • • • • •
Zigbee LED Dimming Controller Input Voltage: 3v DC Dimming range: 0.1-100% Operation Frequency: 2.4GHZ Compatible with all Zigbee Receivers Supplied with magnetic wall mount
HV9101-ZB-SCTP
• • • • • • •
Single Coloured Zigbee LED Touch Panel Compatible with Zigbee Receivers Input Voltage: 240 AC Preset 25% 50% 75% 100% brightness Six Scenes Dimming range: 0.1-100% Operation Frequency: 2.4GHZ
• • • • •
RGBW Zigbee LED Touch Panel Compatible with Zigbee Receivers Three scenes Input Voltage: 240v AC Operation Frequency: 2.4GHZ
HV9101-ZB-RGBWTP
285
75
POWER
3v DC Battery (CR2430)
240v
Must be used with HV9105-ZB-DIM
240v
Must be used with HV9105-ZB-RGBW
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers Single Coloured Zigbee LED Remote Control HV9102-ZB-SCREM
RGBW Zigbee LED Remote Control HV9102-ZB-RGBWREM
120
55
17
IP20 INDOOR USE ONLY
IMAGE
PART NUMBER
DESCRIPTION
POWER
HV9102-ZB-SCREM
• • • • •
Single Coloured Zigbee LED Remote Controller 4 zones + 3 scenes Compatible with Zigbee Receivers Input Voltage: 4.5v DC (3x AAA) Operation Frequency: 2.4GHZ
4.5v 3x AAA Batteries Required
HV9102-ZB-RGBWREM
• • • • •
RGBW Zigbee LED Remote Controller Compatible with Zigbee Receivers 4 zones + 3 scenes Input Voltage: 4.5v DC (3x AAA) Operation Frequency: 2.4GHZ
4.5v 3x AAA Batteries Required
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
286
2022 • Lighting By Havit
SINGLE COLOUR HV9105-ZB-DIM
UNIVERSAL HV9105-ZB-5C 46.5
16 145
RGBW HV9105-ZB-RGBW 28 170 54
IP20 INDOOR USE ONLY
Zigbee LED Strip Receivers IMAGE
PART NUMBER
DESCRIPTION
POWER
• Single Coloured Zigbee LED Receiver • Can be controlled with Zigbee Hub or HV9105-ZB-DIM
• • • •
HV9102-ZB-SCTP or HV9102-ZB-SCREM or HV9101-ZB-5C Input Voltage: 12-24V DC Output Power: 4CH x 5A (240W-480W) Operation frequency 2.4GHZ Dimming range 5-100%
12-24V DC
• RGBW Zigbee LED Receiver • Can be controlled with Zigbee Hub or HV9105-ZB-RGBW
HV9102-ZB-RGBW or HV9102-ZB-RGBWREM or HV9101-ZB-5C • Input Voltage: 12-24V DC • Output Power: 4CH x 5A (240W-480W) • Operation frequency 2.4GHZ
12-24V DC
• Zigbee LED Strip Receiver • Can be used with Zigbee Hub, Zigbee Touch HV9105-ZB-5C
287
• • • •
Panels or Remote Controllers Can be used with all LED Strip Input Voltage: 12-24v DC Output Power: 5ch x 4A (240w-480w) Operation Frequency 2.4GHZ
12-24V DC
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
46
45 TRAILING EDGE DIMMER HV9105-ZB-ACDIM
21
ON-OFF SWITCH HV9105-ZB-ACSW
IP20 INDOOR USE ONLY
Zigbee Relays IMAGE
PART NUMBER
DESCRIPTION
POWER
HV9105-ZB-ACDIM
• • • • • • • •
Zigbee Trailing edge dimmer Can be controlled using HV9101-ZB-5C Can be used with push dimmer Can be used with Zigbee Hub Input Voltage: 240v AC Output Power: 400W (200w LED) Operation frequency 2.4GHZ Dimming Range - 5-100%
240v
HV9105-ZB-ACSW
• • • • • • •
Zigbee on-off switch Can be controlled using HV9101-ZB-5C Can be used with push switch Can be used with Zigbee Hub Input Voltage: 240v AC Output Power: 400W (200w LED) Operation frequency 2.4GHZ
240v
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
288
2022 • Lighting By Havit
LED Strip Touch Panel Controllers IMAGE
289
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9101-DX1
• • • • • •
Single Colour LED strip touch panel Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Dimming range 5-100% Must be used with HV9103-R4-5A
240v AC
HV9101-DX2
• • • • • • •
Colour Temp (CT) LED strip touch panel Customise the colour temperature Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Dimming range 5-100% Must be used with HV9103-R4-5A
240v AC
HV9101-EX3S
• • • • • •
RGB LED strip touch panel Input voltage: 240v AC Output signal: 2.4GHZ + DMX512 Transmitting range: 30m approx Adjustable speed and brightness Must be used with HV9103-F4-5A
240v AC
HV9101-EX4S
• • • • • •
RGBC & RGBW wireless touch panel Input Voltage: 240v AC Output signal: 2.4GHZ + DMX512 Transmitting range approx. 30m Adjustable speed and brightness Must be used with HV9103-F4-5A
240v AC
HV9103-F4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
HV9103-R4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
Single Colour HV9101-DX1
Colour Temp (CT) 3000K-5500K HV9101-DX2
Cutout 66mm x 66mm 86mm
86mm
RGB HV9101-EX3S
RGBC & RGBW HV9101-EX4S
Cutout 66mm x 66mm
11mm
86mm 25mm
86mm
47mm
86mm 6mm 19mm
11mm All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
25mm
www.havit.com.au
290
2022 • Lighting By Havit
LED Strip Touch Panel Controllers IMAGE
291
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9101-DX5
• • • • • • •
Single Colour LED strip touch panel Control up to 4 separate zones Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Dimming range 5-100% Must be used with HV9103-R4-5A
240v AC
HV9101-DX7
• • • • • • • •
Colour Temp (CT) LED strip touch panel Customise colour temp Control up to 4 separate zones Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Dimming range 5-100% Must be used with HV9103-R4-5A
240v AC
HV9101-EX5S
• • • • •
RGBCW Wireless Touch Panel Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range Approx: 30m Must be used with HV9103-F5-DMX-4A
240v AC
HV9101-EX8S
• • • • • • •
RGBC & RGBW wireless touch panel Able to control up to 4 separate zones Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting range approx. 30m Adjustable speed and brightness Must be used with HV9103-F4-5A
240v AC
HV9103-F4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
HV9103-R4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
HV9103-F5-DMX-4A
• • • •
Zone receiving controller 5 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
Single Colour HV9101-DX5
Colour Temp (CT) 3000K-5500K HV9101-DX7
Cutout 66mm x 66mm 86mm
86mm
RGBCW HV9101-EX5S
RGBC & RGBW HV9101-EX8S Cutout 66mm x 66mm
11mm
86mm 25mm
86mm
47mm
86mm 6mm 19mm
11mm All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 25mm Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
292
2022 • Lighting By Havit
LED Strip Dial Controllers IMAGE
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9101-DX61
• • • • •
240v AC
Single Colour LED strip dial dimmer Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Must be used with HV9103-R4-5A
• Colour Temp (CT) LED strip dial dimmer • Customise the colour temperature to • • • •
suit your decor Input Voltage: 240v AC Output Signal: 2.4GHZ + DMX512 Transmitting Range: 30m approx Must be used with HV9103-R4-5A
HV9103-R4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
PART NUMBER
DESCRIPTION
HV9101-D61
• • • •
HV9101-DX62
IMAGE
HV9101-E6-TD1
293
Single Colour LED strip Dimming range 5-100% Input Voltage: 12v DC or 24v DC Optional output Signal: 0-1/10v
• Leading edge Triac dimmer • For use with Havit Triac Dimmable
LED Drivers (HV9660 or HV9661 Models)
• Input Voltage: 240v • Dimming LEDs: 6-300W
240v AC
12v DC 240w 24v DC 480w POWER
12v DC 72w 24v DC 144w
240v AC
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
Single Colour HV9101-DX61
Colour Temp (CT) 3000-5500K HV9101-DX62
Cutout 66mm x 66mm 86mm
86mm
Single Colour HV9101-D61
Single Colour Triac HV9101-E6-TD1
Cutout 66mm x 66mm 11mm
86mm 25mm
86mm
47mm
40 86 6mm
11mm
19mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
25mm
www.havit.com.au
294
2022 • Lighting By Havit LED Strip Touch Panel Controllers IMAGE
INDOOR USE ONLY
PART NUMBER
DESCRIPTION
HV9101-E1
• • • •
Single Colour LED strip touch panel “Favourite” memory button Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
HV9101-E2
• • •
Colour Temp (CT) LED strip touch panel Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
HV9101-E3S
• • •
RGB LED strip touch panel controller Input Voltage: 12v DC or 24v DC Adjustable speed and brightness
12v DC 144w 24v DC 288w
• • •
RGBC & RGBW LED strip Touch Panel controller Input Voltage: 12v DC or 24v DC Adjustable speed and brightness
12v DC 192w 24v DC 384w
• • • •
RGBCW LED Strip Touch Panel Input Voltage: 12-24v DC Adjustable Brightness + Speed 4 x Scenes
12v DC 192w 24v DC 384w
HV9101-E4S
HV9101-E5S
295
IP20 POWER
12v DC 96w 24v DC 192w
12v DC 96w 24v DC 192w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
Single Colour HV9101-E1
Colour Temp (CT) 3000K-5500K HV9101-E2
Cutout 66mm x 66mm 86mm
RGB HV9101-E3S
RGBC & RGBW HV9101-E4S 86mm
Cutout 66mm x 66mm
11mm
86mm 25mm
86mm
47mm
86mm 6mm 19mm
11mm 25mm
RGBCW HV9101-E5S
47mm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
86mm 6mm 19mm
www.havit.com.au
296
2022 • Lighting By Havit
RF LED Remote Controls IMAGE
297
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9102-2819DIM
• • • • • • •
Single Colour LED Strip Controller 4.5v (3xAAA Batteries) Approx. 30m Range 6x Zones 6x Scenes IP20 Must be used with HV9105-1009-5C
4.5v 3x AAA Batteries Required
HV9102-2819
• • • • • • •
RGBC or RGBW LED Strip Controller 4.5v (3xAAA Batteries) Approx. 30m Range 6x Zones 6x Scenes IP20 Must be used with HV9105-1009-5C
4.5v 3x AAA Batteries Required
HV9102-2858Z4-5C
• • • • • • •
RGBCW LED Strip Controller 4.5v (3xAAA Batteries) Approx. 30m Range 4x Zones 4x Scenes IP20 Must be used with HV9105-1009-5C
4.5v 3x AAA Batteries Required
HV9105-1009-5C
• • • •
RF + WIFI LED Strip Receiver For use with all LED Strip Can be used with RF Remote or APP Input Votage: 12v or 24v DC
12v DC 240w 24v DC 480w max
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
SINGLE COLOUR HV9102-2819DIM
RGBC & RGBW HV9102-2819
RGBCW HV9102-2858Z4-5C
RGB
140
140
153 zone
S1
S2
S3
S4
S5
S6
R
G
B
1
2
3
1
2
3
4
5
6
4
5
6
48
17
48
1
2
R
G
3
B
4
CCT
scene
S1
17
S2
S3
S4
52
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
17
298
2022 • Lighting By Havit
RF LED Remote Controls IMAGE
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9102-Q1
• • • • • •
Single Colour LED Strip Remote Controller 3v (2x AAA Batteries) Approx. 30m Range 4 Zones + 3 Scenes Dimming Range: 5-100% Must be used with HV9103-F4-5A
3v 2x AAA Batteries Required
HV9102-Q4
• • • • • • •
RGBC or RGBW LED Strip Remote Controller 3v (2x AAA Batteries) Approx. 30m Range 4 Zones + 3 Scenes Dimming Range: 5-100% Adjustable speed and brightness Must be used with HV9103-F4-5A
3v 2x AAA Batteries Required
HV9102-Q5
• • • • • •
RGBCW LED Strip Controller 3v (2x AA Batteries) Approx: 30m Range 4 Zones + 3 Scenes Dimming Range: 5-100% Must be used with HV9103-F5-DMX-4A
3v 2x AAA Batteries Required
HAVIT COMPATIBLE ACCESSORIES
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
• • HV9103-F5-DMX-4A • •
Zone receiving controller 5 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
12v DC 240w 24v DC 480w
HV9103-F4-5A
299
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
SINGLE COLOUR HV9102-Q1
RGBC & RGBW HV9102-Q4
42
RGBCW HV9102-Q5
15
162
46
19
60 Remote
Remote holder
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
300
2022 • Lighting By Havit
LED Strip Remote Controllers IMAGE
301
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
• • • HV9102-M1+M4-5A • • •
Single colour remote controller and receiver 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
12v DC 240w 24v DC 480w
• • • HV9102-M2+M4-5A • • •
CT remote controller and receiver 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
12v DC 240w 24v DC 480w
• • • HV9102-M3+M4-5A • • •
RGB remote controller and receiver 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC Adjustable speed and brightness
12v DC 240w 24v DC 480w
• • • HV9102-M4+M4-5A • • •
RGBC or RGBW remote controller and receiver 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC Adjustable speed and brightness
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
Single Colour HV9102-M1+M4-5A
Colour Temp (CT) 3000K-5500K HV9102-M2+M4-5A
RGB HV9102-M3+M4-5A
RGBC & RGBW HV9102-M4+M4-5A 9mm
60mm
44mm
104mm
14mm
63mm
78mm
108mm
30mm 175mm
Receiver
Remote
Remote-holder
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
302
2022 • Lighting By Havit
LED Strip Remote Controllers IMAGE
IMAGE
303
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9102-V3
• • • • • •
RGB LED strip remote controller Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A Adjustable speed and brightness
3v DC (CR2032)
HV9102-V4
• • • • • •
RGBC & RGBW LED strip remote controller Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A Adjustable speed and brightness
3v DC (CR2032)
HV9102-V5
• • • • • • •
Single Colour LED strip remote controller Control up to 4 separate zones Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A Dimming range 5-100%
3v DC (CR2032)
HV9102-V6
• • • • • • •
CT LED strip remote controller Control up to 4 separate zones Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A Dimming range 5-100%
3v DC (CR2032)
HV9102-V8
• • • • • • •
RGBC & RGBW LED strip remote controller Control up to 4 separate zones Output Signal: 2.4GHZ Transmitting Range: 30m approx DC 3v battery (CR2032) Must be used with HV9103-R4-5A Adjustable speed and brightness
3v DC (CR2032)
PART NUMBER
DESCRIPTION
HV9103-R4-5A
• • • •
Zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ
POWER
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
RGB HV9102-V3
RGBC & RGBW HV9102-V4
40
SINGLE COLOUR HV9102-V5
CT LED HV9102-V6
RGBC & RGBW HV9102-V8
12 17
145 65
89
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
304
2022 • Lighting By Havit
IP20
LED Strip RF Receiver IMAGE
INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9103-F4-5A
• • • • •
LED zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ Dimming Range 5-100%
12v DC 240w 24v DC 480w
HV9103-R4-5A
• • • • •
LED zone receiving controller 4 Channel Input Voltage: 12v DC or 24v DC Frequency: 2.4GHZ Dimming Range 5-100%
12v DC 240w 24v DC 480w
LED Strip Repeater IMAGE
PART NUMBER
HV9104-LT-3010-12A
HV9104-LT-3040-5A
305
DESCRIPTION
• • • • • •
• • • • • •
POWER
Single Channel Repeater Power Repeater / Amplifier Enables additional loads of LED strip to be controlled from 1 device Single channel Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
12v DC 144w 24v DC 288w
4 Channel Repeater Power Repeater / Amplifier Enables additional loads of LED strip to be controlled from 1 device 4 Channel Input Voltage: 12v DC or 24v DC Dimming Range 5-100%
12v DC 240w 24v DC 480w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
LED Strip RF Receiver HV9103-F4-5A
LED Strip RF Receiver HV9103-R4-5A
Single Channel Repeater HV9104-LT-3010-12A
4 Channel Repeater HV9104-LT-3040-5A
44
30 176
8
160
8
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
306
2022 • Lighting By Havit
IP20
LED Strip WIFI Receivers IMAGE
INDOOR USE ONLY
PART NUMBER
DESCRIPTION
POWER
HV9105-1009-5C
• • • •
Universal RF + WIFI LED Strip Receiver For use with all LED Strip Can be used with RF Remote or APP Input Votage: 12v or 24v DC
12v DC 240w 24v DC 480w
HV9105-WIFI-102-RGBW
• • • • •
RGBC & RGBW LED strip Wifi controller Suits Ecolamp RGBC/W LED Strip Input Voltage: 12v DC or 24v DC Ability to Create Custom Colour Sequences Adjustable speed and brightness
12v DC 144w 24v DC 288w
HV9105-WIFI-104
• • • • • • •
WIFI Multi-function Android 2.2 or above, IOS 5.1 or above 2.4GHz Wi-Fi, 802.11b/g/n protocol 12V DC or 24V DC Max 30m Dimming, CT, RGB, RGBW Dimming Range 5-100%
12v DC 192w 24v DC 384w
HV9105-WIFI-106
• • • • • •
WIFI LED Strip Controller For use with all LED Strip Also supplied with RF Remote Controller 12v or 24v DC Approx. 30m Range Dimming Range: 5-100%
12v DC 192w 24v DC 384w
L-Home App
WIFI-104
WIFI-106
307
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
46.5
16 145
Universal HV9105-1009-5C
L-Home App 33 120 125 20
33
RGBC & RGBW HV9105-WIFI-102-RGBW
120 125 20
WIFI-104 App
WIFI Multi-function HV9105-WIFI-106
WIFI LED strip controller HV9105-WIFI-104 127 45
73
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
308
2022 • Lighting By Havit
IP20 INDOOR USE ONLY
0-1/10v LED Strip Controllers IMAGE
PART NUMBER
DESCRIPTION
POWER
HV9106-LT-393-5A
• • • •
RGB 0-1/10v RGB LED Strip Controller Input Signal: 0-1/10v Input Voltage: 12v DC or 24v DC
12v DC 180w 24v DC 360w
HV9106-LT-701-12A
• • • • •
Single Colour 0-1/10v LED Strip Controller Dimming range: 0-100% Input Signal: 0-1/10v Input Voltage: 12v DC or 24v DC
12v DC 144w 24v DC 288w
HV9106-LT-704-5A
• • • •
RGBC & RGBW 0-1/10v RGBC & RGBW LED Strip Controller Input Signal: 0-1/10v Input Voltage: 12v DC or 24v DC
12v DC 240w 24v DC 480w
Dali LED Strip Controllers IMAGE
309
PART NUMBER
DESCRIPTION
POWER
HV9107-LT-401-12A
• • • • • •
Single Colour Dali LED Strip Controller Dimming range: 0-100% Input Signal: DALI digital dimming signal Input Voltage: 12v DC or 24v DC Output Signal: 0-1/10v
12v DC 144w 24v DC 288w
HV9107-LT-403-6A
• • • • •
RGB Dali RGB LED Strip Controller Input Signal: DALI digital dimming signal Input Voltage: 12v DC or 24v DC Output Signal: 0-1/10v
12v DC 216w 24v DC 432w
HV9107-LT-404-5A
• • • • •
RGBC & RGBW Dali RGBC/RGBW LED Strip Controller Input Signal: DALI digital dimming signal Input Voltage: 12v DC or 24v DC Output Signal: 0-1/10v
12v DC 216w 24v DC 432w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
16mm
39mm 39mm
7mm 7mm
107mm 107mm
15mm 15mm 16mm 15mm 15mm
40mm 40mm
107mm
7mm
107mm
7mm
0-1/10v RGB Controller HV9106-LT-393-5A
0-1/10v Single Colour Controller HV9106-LT-701-12A
0-1/10v RGBC & RGBW Controller HV9106-LT-704-5A
Dali Single Colour Controller HV9107-LT-401-12A
Dali RGB Controller HV9107-LT-403-6A
Dali RGBC & RGBW Controller HV9107-LT-404-5A
44
30 176
8
160
8
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
310
2022 • Lighting By Havit
IP20
DMX LED Strip Controller IMAGE
PART NUMBER
DESCRIPTION
• • • • •
POWER
•
DMX LED strip controller For use with Single Colour LED strip Input signal: DMX512 12v DC 144w Input voltage: 12v DC or 24v DC Max Load Current: 24v DC 288w 12A x 1CH + 0-10V X 1CH + 10V PWM X 1CH Dimming Range: 0-100%
HV9109-LT-823-6A
• • • • • •
DMX LED strip controller For use with RGB LED strip Input signal: DMX512 Input voltage: 12v DC or 24v DC Max Load Current: 6A X 3 Channel Max 18A Dimming Range: 0-100%
12v DC 216w 24v DC 432w
HV9109-LT-820-5A
• • • • • •
DMX LED strip controller For use with RGBC or RGBW LED strip Input signal: DMX512 Input voltage: 12v DC or 24v DC Max Load Current: 5A X 4 Channel Max 20A Dimming Range: 0-100%
12v DC 240w 24v DC 480w
HV9109-LT-811-12A
311
INDOOR USE ONLY
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers
DMX Single Colour Controller HV9109-LT-811-12A
DMX RGB Controller HV9109-LT-823-6A
DMX RGBC & RGBW Controller HV9109-LT-820-5A
44
30 176
8
160
8
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
312
2022 • Lighting By Havit
21
46
45
IP20 INDOOR USE ONLY
IMAGE
313
PART NUMBER
DESCRIPTION
POWER
HV9107-2303SAC-HP
• • • • • • • •
Dali Relay Module Dimmer Relay To make non DALI fittings DALI Compatible IP Rating: IP20 Dimming Range 0-100% Input voltage: 240V No. of addresses: 1 Max Output Power: 200w LED
240v
HV9107-2701S-N
• • • • • • •
Dali Relay Module On and Off Relay To make non DALI fittings DALI Compatible IP Rating: IP20 Input voltage: 240V No. of addresses: 1 Max Output Power: 200w LED
240v
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip Controllers 4 Channel LED Repeater HV9635
5 Channel LED Repeater HV9636
34
LED Dial Dimmer HV9625
147 60.5 r
we
Po
7
79.5
23.5
1-10v LED Strip Dimming Pot HV9628
23.5
23 32
IP20
19
52.8
26
INDOOR USE ONLY
IMAGE
22
23
PART NUMBER
HV9625
HV9628
22
DESCRIPTION
• • • •
POWER
LED Dial Dimmer Suits specified Havit dimmable products 3-300w Max Input voltage: 240v
• 1-10v LED Strip Dimming Pot • 1-10v dimming pot for Clipsal or HPM plate • Enables wall plate dimming on a standard
HV9636
NA
Clipsal or HPM plate • To be used with HV9661 model drivers or HV9106-LT-701-12A
• 4 Channel LED Repeater / Amplifier • Enables additional loads of LED strip to be HV9635
240v
controlled from 1 device
• 4 channel • Input voltage: 12v DC or 24v DC • Dimming Range 5-100% • 5 Channel LED Strip Repeater • Enables Additional loads to be controlled from the 1 device • Input voltage: 12v DC or 24v DC • Dimming Range 5-100%
12v DC 384w 24v DC 768w
12v DC 360w 24v DC 720w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
314
2022 • Lighting By Havit 12v DC - IP66 Weatherproof • • • • •
12v DC constant voltage Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v LED products IP Rating: IP66 IMAGE
PART NUMBER
IP66
INDOOR/OUTDOOR WEATHERPROOF
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9650S
240v AC
12v DC 10w
(H)21x (W)29x (L)89
HV9651
240v AC
12v DC 20w
(H)28x (W)30x (L)162
HV9652
240v AC
12v DC 30w
(H)22x (W)40x (L)148
HV9653
240v AC
12v DC 60w
(H)31x (W)41x (L)179
HV9654
240v AC
12v DC 100w
(H)46x (W)72x (L)210
High Power Factor 12v DC - IP66 Weatherproof IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9658-12V30W
240v AC
12v DC 30w
(H)28x (W)37x (L)212
HV9658-12V60W
240v AC
12v DC 60w
(H)46x (W)67x (L)175
HV9658-12V100W
240v AC
12v DC 100w
(H)46x (W)72x (L)215
HV9658-12V150W
240v AC
12v DC 150w
(H)46x (W)68x (L)247
HV9658-12V200W
240v AC
12v DC 200w
(H)46x (W)68x (L)247
HV9658-12V275W
240v AC
12v DC 275w
(H)50x (W)95x (L)275
Slimline 12v DC - IP66 Weatherproof IMAGE
315
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9658-12V60WS
240v AC
12v DC 60w
(H)22x (W)40x (L)253
HV9658-12V95WS
240v AC
12v DC 95w
(H)22x (W)40x (L)298
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Drivers 24v DC - IP66 Weatherproof • • • • •
24v DC constant voltage Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 24v LED products IP Rating: IP66 IMAGE
PART NUMBER
IP66
INDOOR/OUTDOOR WEATHERPROOF
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9652-24V
240v AC
24v DC 30w
(H)22x (W)40x (L)148
HV9653-24V
240v AC
24v DC 60w
(H)31x (W)41x (L)179
HV9654-24V
240v AC
24v DC 100w
(H)46x (W)72x (L)210
High Power Factor 24v DC - IP66 Weatherproof IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9658-24V30W
240v AC
24v DC 30w
(H)28x (W)37x (L)212
HV9658-24V60W
240v AC
24v DC 60w
(H)46x (W)67x (L)175
HV9658-24V100W
240v AC
24v DC 100w
(H)46x (W)72x (L)215
HV9658-24V150W
240v AC
24v DC 150w
(H)46x (W)68x (L)247
HV9658-24V200W
240v AC
24v DC 200w
(H)46x (W)68x (L)247
HV9658-24V300W
240v AC
24v DC 300w
(H)50x (W)95x (L)275
Slimline 24v DC - IP66 Weatherproof IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9658-24V60WS
240v AC
24v DC 60w
(H)22x (W)40x (L)253
HV9658-24V95WS
240v AC
24v DC 95w
(H)22x (W)40x (L)298
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
316
2022 • Lighting By Havit TRIAC • • • • • •
TRIAC Dimmable LED drivers Constant voltage 12v DC Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v DC single coloured LED strip Can be used with HV9625
IP20 INDOOR USE ONLY
12V DC - IP20 INDOOR IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9660-12V30W
240v AC
12v DC 30w
(H)20x (W)54x (L)155
HV9660-12V60W
240v AC
12v DC 60w
(H)24x (W)61x (L)178
PART NUMBER
IP66
INDOOR/OUTDOOR WEATHERPROOF
12V DC - IP66 WEATHERPROOF IMAGE
317
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9660-12V100W
240v AC
12v DC 100w
(H)43x (W)70x (L)230
HV9660-12V150W
240v AC
12v DC 150w
(H)47x (W)78x (L)265
HV9660-12V200W
240v AC
12v DC 200w
(H)47x (W)78x (L)265
HV9660-12V300W
240v AC
12v DC 300w
(H)47x (W)78x (L)278
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Drivers TRIAC • • • • • •
TRIAC Dimmable LED drivers Constant voltage 24V DC Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 24v DC single coloured LED strip Can be used with HV9625
IP20 INDOOR USE ONLY
24V DC - IP20 INDOOR IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9660-24V30W
240v AC
24v DC 30w
(H)20x (W)54x (L)155
HV9660-24V60W
240v AC
24v DC 60w
(H)24x (W)61x (L)178
IP66
INDOOR/OUTDOOR WEATHERPROOF
24V DC - IP66 WEATHERPROOF IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL(mm)
HV9660-24V100W
240v AC
24v DC 100w
(H)43x (W)70x (L)230
HV9660-24V150W
240v AC
24v DC 150w
(H)47x (W)78x (L)265
HV9660-24V200W
240v AC
24v DC 200w
(H)47x (W)78x (L)265
HV9660-24V300W
240v AC
24v DC 300w
(H)47x (W)78x (L)278
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
318
2022 • Lighting By Havit 2in1 Dimmable Drivers • • • • • •
Triac + 0-1/10V Dimming Constant voltage 12v or 24v DC Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v or 24v DC single coloured LED strip Can be used with either HV9625 or HV9628
IP66
INDOOR/OUTDOOR WEATHERPROOF
12V DC - IP66 WEATHERPROOF IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9661-12V30W
240v AC
12v DC 30w
(H)20x (W)32x (L)260
HV9661-12V60W
240v AC
12v DC 60w
(H)20x (W)32x (L)300
HV9661-12V100W
240v AC
12v DC 100w
(H)23x (W)32x (L)330
HV9661-12V150W
240v AC
12v DC 150w
(H)23x (W)32x (L)368
PART NUMBER
IP66
INDOOR/OUTDOOR WEATHERPROOF
24V DC - IP66 WEATHERPROOF IMAGE
319
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9661-24V30W
240v AC
24v DC 30w
(H)20x (W)32x (L)260
HV9661-24V60W
240v AC
24v DC 60w
(H)20x (W)32x (L)300
HV9661-24V100W
240v AC
24v DC 100w
(H)23x (W)32x (L)330
HV9661-24V150W
240v AC
24v DC 150w
(H)23x (W)32x (L)368
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Drivers 2in1 Dimmable LED Drivers • • • • • •
Triac + 0-1/10v Dimmable LED Drivers Constant Voltage 12v DC or 24v DC Options Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v or 24v DC single coloured LED strip Can be used with either HV9625 or HV9628
IP20 INDOOR USE ONLY
12V DC - IP20 INDOOR IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9662-12V30W
240V AC
12v DC 30w
(H)18.5x (W)x30 (L)260
HV9662-12V60W
240V AC
12v DC 60w
(H)18.5x (W)x30 (L)300
HV9662-12V100W
240V AC
12v DC 100w
(H)22x (W)x30 (L)330
HV9662-12V150W
240V AC
12v DC 150w
(H)22.5x (W)x30 (L)375
PART NUMBER
IP20 INDOOR USE ONLY
24V DC - IP20 INDOOR IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9662-24V30W
240V AC
24v DC 30w
(H)18.5x (W)x30 (L)260
HV9662-24V60W
240V AC
24v DC 60w
(H)18.5x (W)x30 (L)300
HV9662-24V100W
240V AC
24v DC 100w
(H)22x (W)x30 (L)330
HV9662-24V150W
240V AC
24v DC 150w
(H)22.5x (W)x30 (L)375
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
320
2022 • Lighting By Havit Dali Dimmable Drivers
• • • • • •
Dali Dimmable LED drivers Constant voltage 12v or 24v DC Can be used with Push Dimmer Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v or 24v DC single coloured LED strip
IP66
INDOOR/OUTDOOR WEATHERPROOF
12V DC - IP66 WEATHERPROOF IMAGE
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9663-12V30W
240v AC
12v DC 30w
(H)20x (W)32x (L)260
HV9663-12V60W
240v AC
12v DC 60w
(H)20x (W)32x (L)300
HV9663-12V100W
240v AC
12v DC 100w
(H)23x (W)32x (L)330
PART NUMBER
IP66
INDOOR/OUTDOOR WEATHERPROOF
24V DC - IP66 WEATHERPROOF IMAGE
321
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9663-24V30W
240v AC
24v DC 30w
(H)20x (W)32x (L)260
HV9663-24V60W
240v AC
24v DC 60w
(H)20x (W)32x (L)300
HV9663-24V100W
240v AC
24v DC 100w
(H)23x (W)32x (L)330
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Drivers
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
Submersible pond light HV1491RGBW www.havit.com.au
322
2022 • Lighting By Havit 12v DC Constant Voltage • Must be installed with adequate ventilation • Suits Havit 12v LED products • IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9665-12V4W
240v AC
12v DC 4w
(H)21x (W)27x (L)47
12v DC Constant Voltage
• • • •
Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 12v LED Strip IP Rating: IP20
IMAGE
323
IP20 INDOOR USE ONLY
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9666-12V20W
240v AC
12v DC 20w
(H)13x (W)50x (L)128
HV9666-12V30W
240v AC
12v DC 30w
(H)16x (W)53x (L)155
HV9667-12V60W
240v AC
12v DC 60w
(H)32x (W)61x (L)184
HV9667-12V75W
240v AC
12v DC 75w
(H)32x (W)61x (L)184
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Drivers 24v DC Constant Voltage • Must be installed with adequate ventilation • Suits Havit 24v LED products • IP Rating: IP65
IP65
INDOOR/OUTDOOR WEATHERPROOF
IMAGE
PART NUMBER
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9665-24V4W
240v AC
24v DC 4w
(H)21x (W)27x (L)47
24v DC Constant Voltage
• • • •
Supplied with flex and plug Must be installed with adequate ventilation Suits Havit 24v LED Strip IP Rating: IP20
IMAGE
IP20 INDOOR USE ONLY
INPUT POWER
OUTPUT POWER
SIZE HxWxL (mm)
HV9666-24V20W
240v AC
24v DC 20w
(H)13x (W)50x (L)128
HV9666-24V30W
240v AC
24v DC 30w
(H)16x (W)53x (L)155
HV9667-24V60W
240v AC
24v DC 60w
(H)32x (W)61x (L)184
HV9667-24V75W
240v AC
24v DC 75w
(H)32x (W)61x (L)184
PART NUMBER
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
324
2022 • Lighting By Havit 19mm x 21mm
26mm x 18mm
10mm x 10mm
16mm x 16mm
30mm x 30mm
ALU | BLK |WHT 23
22.8
16.5
10
30
16
20
.2
6
11
10
23.6
6 19.5
10
16
26.2
30
HV9690-2119 - Page 327
HV9690-2618 - Page 328
HV9691-1010 - Page 329
HV9691-1616 - Page 330
HV9691-3030 - Page 331
19mm x 30mm
5mm x 7mm
9mm x 15mm
10mm x 25mm
10mm x 89mm
BLK | WHT
BLK | WHT
9.8
9.8mm
6.52
29.5
16
31.55mm 6.5mm
15
7
8
4.2
25.4
18.88
21.06mm
6 mm
88.6mm
6.6 5 mm
9.6
19
24.5mm
HV9692-1930 - Page 332
HV9693-0607 - Page 333
HV9693-0915-Page 334
HV9693-1045-BLK-Page 335
HV9693-1089 - Page 336
10mm x 7mm
15mm x 6mm
16mm x 12mm
18mm x 9mm
18mm x 6mm
ALU | BLK | WHT
ALU | BLK | WHT
BENDABLE
7
6.6
6
11.2 15.2
10
11.2
12
8.5
13
5.7
13.5
18
18
16
HV9693-1007-Page 337
HV9693-1506 - Page 338
HV9693-1612 - Page 339
HV9693-1707 - Page 340
HV9693-1806 - Page 342
19mm x 8mm
18mm x 13mm
18mm x 15mm
18mm x 96mm
20mm x 25mm
18.0mm
ALU | BLK | WHT 8
12.5
13 12.2
18.8
1.5
12.1
16
17.8
12.6mm
24.82mm
96.5mm
28.96mm
1.75mm
14.2mm
1.5mm
13
1.5
12.1
BLK WHT
BLK | WHT
14.7mm
31.85mm
16.2mm
19.7mm 24.5mm
18
15.67mm
HV9693-1808 - Page 343
HV9693-1812 - Page 344
HV9693-1815 - Page 345
HV9693-1896 - Page 346
HV9693-2025 - Page 347
19mm x 14mm
20mm x 70mm
21mm x 21mm
23mm x 10mm
23mm x 28mm
ALU | BLK | WHT 16.2
13.7
70
21
15
28
14 17
25
19.5 20
16.8
20
21
23
10
19.2 23.2
HV9693-1922 - Page 348
HV9693-2070 - Page 349
HV9693-2114 - Page 350
HV9693-2310 - Page 351
HV9693-2320 - Page 352
35mm x 37mm
38mm x 90mm
45mm x 11mm
49mm x 75mm
60mm x 70mm
ALU | BLK | WHT
ALU | BLK |WHT
ALU | BLK |WHT
38
28.8
40 30
37
90
31 39
37.2
11.3
HV9693-3890 - Page 354
27.6 70
24
44.8 40
35
HV9693-3537 - Page 353
74.5
HV9693-4511 - Page 355
49
HV9693-4975 - Page 356
57.6 29.3
41.2
60
HV9693-6070 - Page 357
DIAGRAMS ARE NOT TO SCALE *Custom black and white power coating colour will vary from colour shown, additional charges will apply.
325
www.havit.com.au
Aluminium Profile 60mm x 80mm
80mm x 35mm
ALU | BLK |WHT
82mm x 90mm
11mm x 45mm
11mm x 70mm
ALU | BLK |WHT
BLK |WHT
BLK |WHT 11mm
11mm
19.1
4.23mm
80
35
4.23mm
89.5
45mm
41.2 80
57.2
19.99mm
7mm
51.2
70mm
4.23mm
60
82
HV9693-6080 - Page 358
HV9693-8035 - Page 359
HV9693-8090-Page 360
HV9694-1145 - Page 361
HV9694-1170 - Page 362
6mm x 25mm
11mm x 7mm
25mm x 9mm
25mm x 16mm
24mm x 20mm
ALU | BLK |WHT
ALU | BLK |WHT
2.1 10
10.8
25
4.2
7
Cut Out = 19mm 23.7
Cut Out = 19mm 25
Cut Out = 19mm 25 8.5
13 18
6.2
16
19.7
13 18
6.1
HV9695-1107 - Page 364
HV9695-2507-Page 365
HV9695-2515 - Page 366
30mm x 10mm
44mm x 35mm
44mm x 40mm
100mm x 35mm
44
44
Cut Out = 81mm 100
30 10
20.6
35
34
23
HV9695-2520 - Page 367
Cut Out = 35mm
Cut Out = 35mm
Cut Out = 24mm
12.4
12.7
HV9694-0625 - Page 363
9
LD1170
40
35
45
35
31
HV9695-2810 - Page 368
HV9695-4435 - Page 369
HV9695-4540 - Page 370
HV9695-9835 - Page 372
19mm x 9mm
26mm x 26mm
17mm x 8mm
23mm x 8mm
HV9699-2308 - Page 375
26
19.2 26mm
11.2
8.5 12mm
22.2mm
HV9698-1908 - Page 373
HV9698-2626 - Page 374
HV9699-1708 - Page 375
23mm x 15mm
27mm x 7mm
26mm x 26mm
HV9699-2315 - Page 376
HV9699-2707 - Page 376
HV9699-1616 - Page 376
DIAGRAMS ARE NOT TO SCALE *All profile custom cut lengths will include end caps. E.G. 2000mm will be cut at 1995mm to allow for the installation of end caps. *Powder coating available for most models in black or white at an additional cost per metre.
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
326
2022 • Lighting By Havit Semi Round LED Profile • Shallow square profile with rounded diffuser • UV Stabilised PC diffuser
23
16.5 11 6 19.5
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9690-2119
Shallow Square Aluminium Profile with Rounded Diffuser - Kit - / Metre Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9690-2119-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
327
www.havit.com.au
Aluminium Profile Semi Round LED Profile • Shallow square profile with rounded diffuser • UV Stabilised PC diffuser
22.8 23.6 26.2
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9690-2618
Shallow Square Aluminium Profile with Rounded Diffuser - Kit - / Metre Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9690-2618-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
328
2022 • Lighting By Havit Micro Corner LED Profile • 90 degree corner profile • UV Stabilised PC diffuser
10
6 10
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
HV9691-1010
90° Corner Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length IP20
3 metres
HV9691-1010-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
3 metres
IP20
MAX LENGTH
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
329
www.havit.com.au
Aluminium Profile Corner LED Profile • 90 degree corner profile • UV Stabilised PC diffuser
16
10 16
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
HV9691-1616
90° Corner Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length IP20
3 metres
HV9691-1616-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9691-1616-BLK
90° Corner Black Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length IP20
3 metres
HV9691-1616-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9691-1616-WHT
90° Corner White Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length IP20
3 metres
HV9691-1616-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
3 metres
IP20
MAX LENGTH
HAVIT COMPATIBLE ACCESSORIES HV9691-1616-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9691-1616-BLKSD: Black diffuser to suit HV9691-1616 up to 3m length SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
330
2022 • Lighting By Havit Corner LED Profile • 90 degree corner profile • UV Stabilised PC diffuser
30
20
.2
30
IP20 BLACK
INDOOR USE ONLY
WHITE
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
HV9691-3030
90° Corner Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length IP20
3 metres
HV9691-3030-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
3 metres
IP20
MAX LENGTH
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
331
www.havit.com.au
Aluminium Profile Wardrobe LED Profile • For use in wardrobes • UV Stabilised PC diffuser • Max Weight 10kg per metre
29.5
16
19
BLACK
IP20 INDOOR USE ONLY
WHITE
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9692-1930
Wardrobe Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 1 x centre rod per metre + 2x end caps per length
IP20
3 metres
HV9692-1930-3M
3m length includes aluminium, diffuser, 6x end caps and 3x centre rods
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9692-1930-CR: Centre mounting rod to suit HV9692-1930 SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
332
2022 • Lighting By Havit Micro Square LED Profile • Micro square profile • UV Stabilised PC diffuser
7 4.2 6.6
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-0607
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-0607-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
333
www.havit.com.au
Aluminium Profile Square LED Profile • Square profile • UV Stabilised PC diffuser
15
8 9.6
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-0915
9mm x 15mm Square profile with PC diffuser. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-0915-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
334
2022 • Lighting By Havit Slim Square LED Profile • Slim Square Profile • UV Stabilised PC Diffuser 9.8 6.52
18.88
25.4
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1045-BLK
Black Slim Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1045-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-1045-WHT
White Slim Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1045-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-1045-SUSKIT: Optional suspension kit SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
335
www.havit.com.au
Aluminium Profile Slim Square LED Profile • Slim Square Profile • UV Stabilised PC Diffuser 9.8mm
31.55mm 6.5mm
21.06mm
6 mm
88.6mm
5 mm
24.5mm
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1089-BLK
Black Slim Aluminium Square profile with PC diffuser Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1089-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-1089-WHT
White Slim Aluminium Square profile with PC diffuser Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1089-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-1089-SUSKIT: Optional suspension kit SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
336
2022 • Lighting By Havit Square LED Profile • Shallow square profile • UV Stabilised PC diffuser
7
6.6
10
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1007
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1007-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
337
www.havit.com.au
Aluminium Profile Square LED Profile • Shallow square profile • UV Stabilised PC diffuser
11.2 15.2
BLACK
6
IP20 INDOOR USE ONLY
WHITE
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1506
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1506-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-1506-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
338
2022 • Lighting By Havit Square LED Profile • Shallow square profile • UV Stabilised PC diffuser
11.2
12
16
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1612
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1612-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1612-BLK
Black Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1612-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1612-WHT
White Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1612-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-1612-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-1612-BLKSD: Black diffuser to suit HV9693-1612 up to 3m length SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
339
www.havit.com.au
Aluminium Profile Square LED Profile • Shallow square profile • UV Stabilised PC diffuser
13
8.5
18
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1707
18mm x 9mm Shallow square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1707-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1707-BLK
18mm x 9mm Black shallow square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1707-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1707-WHT
18mm x 9mm White shallow square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1707-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-1707-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-1707-BLKSD: Black diffuser to suit HV9693-1707 up to 3m length SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
340
2022 • Lighting By Havit
Lighting by Havit 341 www.havit.com.au
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
Aluminium Profile Bendable LED Profile • Shallow square profile • UV Stabilised PC diffuser
13.5
5.7
18
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1806
Shallow Square Bendable Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1806 -3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-1806-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD clip
clip
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
342
2022 • Lighting By Havit IP65 Rated Square LED Profile • • •
Shallow square profile UV Stabilised PC diffuser Profile can only be installed using supplied mounting clips
8
12.5 18.8 12.1
1.5
IP65
BLACK
INDOOR/OUTDOOR WEATHERPROOF
WHITE
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1808
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps and seals per length
IP65
3 metres
HV9693-1808-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP65
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
343
www.havit.com.au
Aluminium Profile IP65 Rated Square LED Profile • • •
Shallow square profile UV Stabilised PC diffuser Profile can only be installed using supplied mounting clips
13 12.2 17.8 12.1
1.5
IP65
BLACK
INDOOR/OUTDOOR WEATHERPROOF
WHITE
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1812
Shallow Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps and seals per length
IP65
3 metres
HV9693-1812-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP65
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
344
2022 • Lighting By Havit Square LED Profile • •
Deep square profile UV Stabilised PC diffuser
16 13 18
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1815
18mm x 15mm Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1815-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1815-BLK
18mm x 15mm Black Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1815-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9693-1815-WHT
18mm x 15mm White Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-1815-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-1815-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-1815-BLKSD: Black diffuser to suit HV9693-1815 up to 3m length SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
345
www.havit.com.au
Aluminium Profile Slim Square LED Profile • •
Slim Square Profile UV Stabilised PC Diffuser 18.0mm
31.85mm
14.7mm
96.5mm
28.96mm
14.2mm
24.5mm
15.67mm
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1896-BLK
Black Slim Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1896-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-1896-WHT
White Slim Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1896-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-1896-BLKSD: Black diffuser to suit HV9693-1896 up to 3m length HV9693-1896-SUSKIT: Optional suspension kit SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
346
2022 • Lighting By Havit Deep Diffuser LED Profile • Square Profile with Deep Diffuser • UV Stabilised PC Diffuser 12.6mm
24.82mm 1.75mm 1.5mm
16.2mm
19.7mm
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2025-BLK
Black square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2025-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-2025-WHT
White square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2025-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-2025-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-2025-BLKSD: Black diffuser to suit HV9693-2025 up to 3m length HV9693-2025-SUSKIT: Optional suspension kit HV9693-2025-SMCLIP: Optional surface mount clip SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
347
www.havit.com.au
Aluminium Profile Square LED Profile • Deep square profile • UV Stabilised PC diffuser • Supplied with aluminium mounting bar
13.7
16.2
19.5
IP20 BLACK
INDOOR USE ONLY
WHITE
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-1922
19mm x 14mm Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-1922-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
348
2022 • Lighting By Havit Square LED Profile • •
Square aluminium profile UV Stabilised PC Diffuser
70
15
17
25
IP20
20
INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2070
Deep Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2070-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-2070-BLK
Black Deep Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2070-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-2070-WHT
White Deep Square Aluminium Profile with PC Diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2070-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-2070-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-2070-BLKSD: Black diffuser to suit HV9693-2070 up to 3m length HV9693-2070-JOINER: Joiner kit to allow multiple lengths to be joined to form a continuous run. HV9705-9953: Optional suspension kit SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
349
www.havit.com.au
Aluminium Profile Square LED Profile • •
Shallow square profile with square diffuser UV Stabilised PC diffuser
21 14 16.8 21
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2114
21mm x 21mm Deep square profile with square diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-2114-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
350
2022 • Lighting By Havit Square LED Profile • •
Shallow double square profile UV Stabilised PC diffuser
10
20 23
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2310
23mm x 10mm Shallow double square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9693-2310-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-2310-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
351
www.havit.com.au
Aluminium Profile Square LED Profile • •
Deep square profile UV Stabilised PC diffuser
28 19.2 23.2
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-2320
23mm x 28mm Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-2320-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-2320-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
352
2022 • Lighting By Havit Square LED Profile • •
Deep square profile UV Stabilised PC diffuser
37
31 35
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-3537
35mm x 37mm Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3537-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-3537-BLK
35mm x 37mm Black deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3537-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-3537-WHT
35mm x 37mm White deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3537-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-3537-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-3537-BLKSD: Black diffuser to suit HV9693-3537 up to 3m length HV9693-3537-JOINER: Joiner kit to allow multiple lengths to be joined to form a continuous run. HV9705-9953: Optional suspension kit SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
353
www.havit.com.au
Aluminium Profile Square LED Profile • Large Deep square profile • UV Stabilised PC diffuser 38
40 30 90 39
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-3890
38mm x 90mm Square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3890-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-3890-BLK
38mm x 90mm Black Square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3890-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-3890-WHT
38mm x 90mm White Square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-3890-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-3890-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-3890-BLKSD: Black diffuser to suit HV9693-3890 up to 3m length HV9693-3890-JOINER: Joiner kit to allow multiple lengths to be joined to form a continuous run. HV9705-9953: Optional suspension kit SAMPLE INSTALLATION METHOD
DRIVER DRIVER
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
354
2022 • Lighting By Havit Square LED Profile • Large shallow square profile • UV Stabilised PC diffuser
11.3
37.2 44.8
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-4511
45mm x 11mm Large shallow square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-4511-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-4511-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
355
www.havit.com.au
Aluminium Profile Square LED Profile • •
Deep square profile UV Stabilised PC diffuser
27.6
74.5
24 40 49
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-4975
49mm x 75mm Deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-4975-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9705-9953: Optional suspension kit SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
356
2022 • Lighting By Havit Square LED Profile • Large square profile • UV Stabilised PC diffuser 28.8
70
57.6 29.3
41.2
60
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-6070
60mm x 70mm Deep large square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6070-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-6070-BLK
60mm x 70mm Black deep large square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6070-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-6070-WHT
60mm x 70mm White deep large square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6070-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-6070-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-6070-BLKSD: Black diffuser to suit HV9693-6070 up to 3m length HV9693-6070-JOINER: Joiner kit to allow multiple lengths to be joined to form a continuous run. HV9705-SM: Optional surface mount clip. HV9705-9953: Optional suspension kit SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
357
www.havit.com.au
Aluminium Profile Square LED Profile • •
Large Up/Down square profile UV Stabilised PC diffuser
80
19.1
57.2
60
IP20 INDOOR USE ONLY
Top View
PART NUMBER
DESCRIPTION
IP RATING
HV9693-6080
60mm x 80mm up/down profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6080 -3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-6080-BLK
60mm x 80mm Black up/down profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-6080 -BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-6080-WHT
60mm x 80mm White up/down profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
IP20
3 metres
HV9693-6080 -WHT-3M 3m Length includes aluminium, diffuser + 6x end caps
MAX LENGTH
HAVIT COMPATIBLE ACCESSORIES HV9693-6080-SD-B-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-6080-BLKSD-B: Black diffuser to suit HV9693-6080 up to 3m length HV9693-6080-JOINER: Joiner kit to allow multiple lengths to be joined to form a continuous run. HV9705-9952: Optional suspension kit SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
358
2022 • Lighting By Havit Square LED Profile • Large deep square profile • UV Stabilised PC diffuser
35
41.2 80
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-8035
80mm x 35mm Large deep square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-8035-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-8035-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
359
www.havit.com.au
Aluminium Profile Square LED Profile • Large deep square profile • UV Stabilised PC diffuser • Adjustable strip height via movable insert
89.5 51.2
82
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9693-8090
82mm x 90mm Deep large square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-8090-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-8090-BLK
82mm x 90mm Black deep large square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-8090-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HV9693-8090-WHT
82mm x 90mm White deep large square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9693-8090-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9693-8090-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9693-8090-BLKSD: Black diffuser to suit HV9693-8090 up to 3m length HV9705-9953: Optional suspension kit SAMPLE INSTALLATION METHOD
DRIVER
DRIVER
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
360
2022 • Lighting By Havit Side Mount LED Profile • •
Side Mount LED Profile UV Stabilised PC diffuser
11mm
4.23mm 45mm 7mm
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9694-1145-BLK
11mm x 45mm Black side mounted profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9694-1145-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9694-1145-WHT
11mm x 45mm White side mounted profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9694-1145-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
361
www.havit.com.au
Aluminium Profile Up & Down Side Mount LED Profile • •
Up & Down Side Mount LED Profile UV Stabilised PC diffusers 11mm
4.23mm
19.99mm
70mm
4.23mm
LD1170
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9694-1170-BLK
11mm x 70mm Black up/down side mounted profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9694-1170-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9694-1170-WHT
11mm x 70mm White up/down side mounted profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9694-1170-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
362
2022 • Lighting By Havit Side Mount LED Profile • Slim side mounted square profile • UV Stabilised PC diffuser 2.1 10 25
6.1
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
HV9694-0625
6mm x 25mm Side Mounted square profile with UV Stabilised PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
MAX LENGTH 1 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
363
www.havit.com.au
Aluminium Profile Micro Winged LED Profile • • •
Shallow micro winged square profile UV Stabilised PC diffuser Suitable for recessed installation
Cut out = 6.5mm 10.8
4.2
7
6.2
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-1107
11mm x 7mm Micro winged square profile with UV Stabilised PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser,2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-1107-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
364
2022 • Lighting By Havit Winged LED Profile • Shallow winged square profile • UV Stabilised PC diffuser • Suitable for recessed installation Cut Out = 19mm 25 13 18
8.5
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-2507
25mm x 9mm Shallow winged square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2507-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9695-2507-BLK
25mm x 9mm Black shallow winged square profile with PC diffuser - Kit - / Metre. Custom Cut Length. IP20 Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
3 metres
HV9695-2507-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9695-2507-WHT
25mm x 9mm White shallow winged square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2507-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9695-2507-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9695-2507-BLKSD: Black diffuser to suit HV9695-2507 up to 3m length SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
365
www.havit.com.au
Aluminium Profile Winged LED Profile • Deep winged square profile • UV Stabilised PC diffuser • Suitable for recessed installation Cut Out = 19mm 25
16 13 18
IP20 INDOOR USE ONLY
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-2515
25mm x 16mm Deep winged square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2515-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9695-2515-BLK
25mm x 16mm Black Deep winged square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Black Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2515-BLK-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HV9695-2515-WHT
25mm x 16mm White Deep winged square profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with White Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2515-WHT-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9695-2515-SD-ROLL: Diffuser available for continuous run of up to 20 metres HV9695-2515-BLKSD: Black diffuser to suit HV9695-2515 up to 3m length SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
366
2022 • Lighting By Havit Winged LED Profile • • • •
Deep winged square profile UV Stabilised PC diffuser Supplied with spring clips Suitable for recessed installation Cut Out = 19mm 23.7
19.7
12.4
12.7
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-2520
25mm x 20mm Deep winged square profile with UV Stabilised PC diffuser - Kit - / Metre. Custom Cut Length.Supplied with Aluminium, Diffuser, 2x Spring Clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2520 -3M
3m Length includes aluminium, diffuser + 6x end caps & 6x spring clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9695-2520-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
367
www.havit.com.au
Aluminium Profile Winged LED Profile • Shallow winged square profile • UV Stabilised PC diffuser • Suitable for recessed installation Cut Out = 24mm 30
9
20.6
10
23
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-2810
30mm x 10mm Shallow winged square profile with UV Stabilised PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x mounting clips per metre + 2x end caps per length
IP20
3 metres
HV9695-2810-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x mounting clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9695-2810-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
368
2022 • Lighting By Havit Winged LED Profile • Large square winged profile • UV Stabilised PC diffuser • Suitable for recessed installation Cut Out = 35mm 44
35
34
35
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-4435
44mm x 35mm Large square winged profile with UV Stabilised PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9695-4435-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9695-4435-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
369
www.havit.com.au
Aluminium Profile Winged LED Profile • • • •
Large square winged profile UV Stabilised PC diffuser Supplied with spring clips Suitable for recessed installation
Cut Out = 35mm 44
40
31
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-4540
44mm x 40mm Large square winged profile with UV Stabilised PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x spring clips per metre + 2x end caps per length
IP20
3 metres
HV9695-4540-3M
3m Length includes aluminium, diffuser + 6x end caps & 6x spring clips
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9695-4540-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
370
2022 • Lighting By Havit
Lighting by Havit 371 www.havit.com.au
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
Aluminium Profile Winged LED Profile • • • •
Large deep square winged profile UV Stabilised PC diffuser Suitable for recessed installation Supplied with spring clips
Cut Out = 81mm 100 35
45
BLACK
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9695-9835
100mm x 35mm Large deep square winged profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 4x spring clips per metre + 2x end caps per length
IP20
3 metres
HV9695-9835-3M
3m Length includes aluminium, diffuser, 12x spring clips + 6x end caps
IP20
3 metres
HAVIT COMPATIBLE ACCESSORIES HV9695-9835-SD-ROLL: Diffuser available for continuous run of up to 20 metres SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
372
2022 • Lighting By Havit Foot Trafficable LED Profile • UV Stabilised PC diffuser • Foot trafficable • Adequate drainage must be allowed 19.2
11.2
BLACK
8.5
IP20
WHITE
INDOOR USE ONLY
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9698-1908
19mm x 9mm Profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9698-1908-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
373
www.havit.com.au
Aluminium Profile Foot Trafficable LED Profile • UV Stabilised PC diffuser • Foot trafficable • Adequate drainage must be allowed 26
26mm 12mm
22.2mm
BLACK
IP20 INDOOR USE ONLY
WHITE
Powder Coating Available*
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9698-2626
26mm x 26mm Profile with PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser + 2x end caps per length
IP20
3 metres
HV9698-2626-3M
3m Length includes aluminium, diffuser + 6x end caps
IP20
3 metres
SAMPLE INSTALLATION METHOD
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
374
2022 • Lighting By Havit
• • • •
Aluminium profile for LED strip Shallow square profile UV Stabilised PC diffuser Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
16.2
12.2
8.0
17.2 PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-1708-2M
17 x 8mm shallow square profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
IP RATING
LENGTH
• • • • •
Aluminium profile for LED strip Shallow winged square profile UV Stabilised PC diffuser Suitable for recessed installation Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
23.3 8.0
6.0
12.2 17.2
PART NUMBER
DESCRIPTION
HV9699-2308-2M
23mm x 8mm shallow winged profile with UV Stabilised PC diffuser - 2 metre length IP20
2 metres
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
375
www.havit.com.au
Aluminium Profile 23.3
15.3
13.3 12.2 17.2
• • • • •
Aluminium profile for LED strip Deep winged square profile UV Stabilised PC diffuser Suitable for recessed installation Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-2315-2M
23mm x 15mm deep winged profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
27.0 5.0
• • • •
24.0
7.0
Aluminium profile for LED strip Shallow double square profile UV Stabilised PC diffuser Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-2707-2M
27mm x 7mm shallow square profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
16.0 10.0
• • • •
16.0
Aluminium profile for LED strip 90 degree corner profile UV Stabilised PC diffuser Supplied 2m lengths with 4 x end caps & 4 x mounting clips.
PART NUMBER
DESCRIPTION
IP RATING
LENGTH
HV9699-1616-2M
16mm x 16mm corner profile with UV Stabilised PC diffuser - 2 metre length
IP20
2 metres
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
www.havit.com.au
376
2022 • Lighting By Havit LED Profile Suspension Kit
HV9705-9955
HV9705-9952
HV9705-9953
HV9705-9954
HV9705-9956
PART NUMBER
DESCRIPTION
IP RATING
MAX LENGTH
HV9705-9952
2metre suspension kit to suit HV9693-6080 aluminium profile
IP20
2 metres
HV9705-9953
2metre suspension kit to suit aluminium profile
IP20
2 metres
HV9705-9954
Suspension cable to suit HV9705-9952 & HV9705-9953
IP20
100 metres
HV9705-9955
2 core low voltage suspension cable to suit HV9705-9956
IP20
100 metres
HV9705-9956
Suspension kit to suit HV9705-9955
IP20
N/A
10mm Aluminum Heat Sink • Heat dissipating surface to suit Havit LED strip
PART NUMBER
DESCRIPTION
IP RATING
HV9705-1003
10mm x 3mm Aluminum Heat Sink
IP20
MAX LENGTH 3 metres
16mm Aluminum Heat Sink • Heat dissipating surface to suit Havit LED strip
PART NUMBER
DESCRIPTION
IP RATING
HV9705-1603
16mm x 3mm Aluminum Heat Sink
IP20
MAX LENGTH 3 metres
20mm Aluminum Heat Sink • Heat dissipating surface to suit Havit LED strip
PART NUMBER
DESCRIPTION
IP RATING
HV9705-2003
20mm x 3mm Aluminum Heat Sink
IP20
MAX LENGTH 3 metres
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
377
www.havit.com.au
Aluminium Profile
All LED strip must be installed using anti-static measures and on an aluminium heat dissipating surface for warranty purposes (HV9705-1003, HV9705-1603 or HV9705-2003) All IP67 LED Strip measurements do not include the end caps, please refer to Profile and LED Strip compatibility chart for correct models. When choosing LED Strip to suit profile, remember to consider the cutting increments of the strip.
*Custom black and white power coating colour will vary from colour shown, additional charges will apply.
Lighting by Havit 378
www.havit.com.au
2022 • Lighting By Havit
20 Metre Long Run LED Strip Lighting • • •
• •
LED flexible strip light Maximum length of 20m Dimmable
Peel and stick backing for initial placement Beam angle 120 degrees
Scan QR Code For Havit LED Profile Compatibility Chart
IP20 INDOOR USE ONLY
www.Havit.com.au/PCC
3000K, 4000K & 5500K - CRI: ≥90 - IP20 INDOOR IMAGE
WATTAGE LED LUMENS PER METRE PER METRE VOLTAGE PER METRE
MAX LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
4.8w/m
20m
100mm
10x2
24v DC
4.8w/m
20m
100mm
10x2
24v DC
4.8w/m
20m
100mm
10x2
PART NUMBER
SMD
IP RATING
HV9741-IP20-60-3K
3040
IP20
60
450LM
24v DC
HV9741-IP20-60-4K
3040
IP20
60
475LM
HV9741-IP20-60-5K
3040
IP20
60
500LM
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV9942-5PK HV9942-10PK
Ezi Tail connectors suitable for 10mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only - 10 pack
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
379
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip 10 Metre Long Run LED Strip Lighting • LED flexible strip light • Maximum length of 10m • Up to 130lm per watt
• Dimmable • Peel and stick backing for initial placement • Beam angle 120 degrees
Scan QR Code For Havit LED Profile Compatibility Chart
IP20 INDOOR USE ONLY
www.Havit.com.au/PCC
3000K - CRI: ≥90 - IP20 INDOOR IMAGE
PART NUMBER
SMD
IP RATING
LED LUMENS WATTAGE PER METRE PER METRE VOLTAGE PER METRE
MAX LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
HV9722-IP20-64-3K
2835
IP20
64
595lm
24v DC
4.8w/m
10m
125mm
8x2
HV9722-IP20-128-3K
2835
IP20
128
1280lm
24v DC
9.6w/m
10m
63mm
8x2
HV9782-IP20-80-3K
2835
IP20
80
1700lm
24v DC
14.4w/m
10m
125mm
10x2
MAX LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
4000K - CRI: ≥90 - IP20 INDOOR IMAGE
PART NUMBER
SMD
IP RATING
LED LUMENS WATTAGE PER METRE PER METRE VOLTAGE PER METRE
HV9722-IP20-64-4K
2835
IP20
64
700lm
24v DC
4.8w/m
10m
125mm
8x2
HV9722-IP20-128-4K
2835
IP20
128
1375lm
24v DC
9.6w/m
10m
63mm
8x2
HV9782-IP20-80-4K
2835
IP20
80
1860lm
24v DC
14.4w/m
10m
125mm
10x2
MAX LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5500K - CRI: ≥90 - IP20 INDOOR IMAGE
PART NUMBER
SMD
IP RATING
LED LUMENS WATTAGE PER METRE PER METRE VOLTAGE PER METRE
HV9722-IP20-64-5K
2835
IP20
64
620lm
24v DC
4.8w/m
10m
125mm
8x2
HV9722-IP20-128-5K
2835
IP20
128
1240lm
24v DC
9.6w/m
10m
63mm
8x2
HV9782-IP20-80-5K
2835
IP20
80
1700lm
24v DC
14.4w/m
10m
125mm
10x2
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV9941-5PK HV9941-10PK HV9942-5PK HV9942-10PK
Ezi Tail connectors suitable for 8mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 8mm IP20 LED strip only - 10 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only - 10 pack
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
380
2022 • Lighting By Havit
Scan QR Code For Havit LED Profile Compatibility Chart
IP54
IP67
INDOOR/OUTDOOR WEATHERPROOF
INDOOR/OUTDOOR WEATHERPROOF
www.Havit.com.au/PCC
3000K - IP67 WEATHERPROOF IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
12x6
9.6w/m
5m
25mm
12x6
1560lm
24v DC 19.2w/m
5m
25mm
14x6
1200lm
12v DC 14.4w/m
5m
50mm
14x6
CUTTING INCREMENT
SIZE WxH (mm)
PART NUMBER
SMD
HV9723-IP67-60-3K
3528
IP67
60
390lm
12v DC
4.8w/m
HV9723-IP67-120-3K
3528
IP67
120
780lm
12v DC
HV9723-IP67-240-3K-1
3528
IP67
240
HV9783-IP67-60-3K
2835
IP67
60
3000K - IP54 WATER RESISTANT IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9723-IP54-60-3K
3528
IP54
60
390lm
12v DC
4.8w/m
5m
50mm
8x3
HV9723-IP54-120-3K
3528
IP54
120
780lm
12v DC
9.6w/m
5m
25mm
8x3
HV9723-IP54-240-3K-1
3528
IP54
240
1560lm
24v DC 19.2w/m
5m
25mm
10x3
HV9783-IP54-60-3K
2835
IP54
60
1200lm
12v DC 14.4w/m
5m
50mm
10x3
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
381
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip 3000K LED Strip Lighting • LED flexible strip light • Dimmable
• Peel and stick backing for initial placement • Beam angle 120 degrees
Scan QR Code For Havit LED Profile Compatibility Chart
IP20 INDOOR USE ONLY
www.Havit.com.au/PCC
3000K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
8x2
9.6w/m
5m
25mm
8x2
1560lm
24v DC 19.2w/m
5m
25mm
10x2
240
1560lm
24v DC 19.2w/m
5m
50mm
14x2
IP20
60
1200lm
12v DC 14.4w/m
5m
50mm
10x2
2835
IP20
120
1920lm
12v DC
5m
25mm
10x2
HV9783-IP20-168-3K
2835
IP20
168
3260lm
24v DC 32.6w/m
5m
83mm
19x2
HV9783-IP20-252-3K
2835
IP20
252
4140lm
24v DC
3m
83mm
39x2
CUTTING INCREMENT
SIZE WxH (mm)
33mm
6x2mm
PART NUMBER
SMD
HV9723-IP20-60-3K
3528
IP20
60
390lm
12v DC
4.8w/m
HV9723-IP20-120-3K
3528
IP20
120
780lm
12v DC
HV9723-IP20-240-3K-1
3528
IP20
240
HV9723-IP20-240-3K-2
3528
IP20
HV9783-IP20-60-3K
2835
HV9783-IP20-120-3K
24w/m
46w/m
3000K - IP20 SIDE MOUNTED IMAGE
PART NUMBER
SMD
HV9723-IP20-96SM-3K
335
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
96
500lm
12v DC
7.7w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV9941-5PK HV9941-10PK HV9942-5PK HV9942-10PK
Ezi Tail connectors suitable for 8mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 8mm IP20 LED strip only - 10 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only - 10 pack
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-2003
20mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
382
2022 • Lighting By Havit Lighting by Havit
Scan QR Code For Havit LED Profile Compatibility Chart
IP54
IP67
INDOOR/OUTDOOR WEATHERPROOF
INDOOR/OUTDOOR WEATHERPROOF
www.Havit.com.au/PCC
4000K - IP67 WEATHERPROOF IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
12x6
9.6w/m
5m
25mm
12x6
1640lm
24v DC 19.2w/m
5m
25mm
14x6
1260lm
12v DC 14.4w/m
5m
50mm
14x6
CUTTING INCREMENT
SIZE WxH (mm)
PART NUMBER
SMD
HV9723-IP67-60-4K
3528
IP67
60
410lm
12v DC
4.8w/m
HV9723-IP67-120-4K
3528
IP67
120
820lm
12v DC
HV9723-IP67-240-4K-1
3528
IP67
240
HV9783-IP67-60-4K
2835
IP67
60
4000K - IP54 WATER RESISTANT IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9723-IP54-60-4K
3528
IP54
60
410lm
12v DC
4.8w/m
5m
50mm
8x3
HV9723-IP54-120-4K
3528
IP54
120
820lm
12v DC
9.6w/m
5m
25mm
8x3
HV9723-IP54-240-4K-1
3528
IP54
240
1640lm
24v DC 19.2w/m
5m
25mm
10x3
HV9783-IP54-60-4K
2835
IP54
60
1260lm
12v DC 14.4w/m
5m
50mm
10x3
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
383
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip 4000K LED Strip Lighting • LED flexible strip light • Dimmable
• Peel and stick backing for initial placement • Beam angle 120 degrees
Scan QR Code For Havit LED Profile Compatibility Chart
IP20 INDOOR USE ONLY
www.Havit.com.au/PCC
4000K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
8x2
9.6w/m
5m
25mm
8x2
1640lm
24v DC 19.2w/m
5m
25mm
10x2
240
1640lm
24v DC 19.2w/m
5m
50mm
14x2
IP20
60
1260lm
12v DC 14.4w/m
5m
50mm
10x2
2835
IP20
120
2040lm
12v DC
5m
25mm
10x2
HV9783-IP20-168-4K
2835
IP20
168
3750lm
24v DC 32.6w/m
5m
83mm
19x2
HV9783-IP20-252-4K
2835
IP20
252
4370lm
24v DC
3m
83mm
39x2
CUTTING INCREMENT
SIZE WxH (mm)
33mm
6x2
PART NUMBER
SMD
HV9723-IP20-60-4K
3528
IP20
60
410lm
12v DC
4.8w/m
HV9723-IP20-120-4K
3528
IP20
120
820lm
12v DC
HV9723-IP20-240-4K-1
3528
IP20
240
HV9723-IP20-240-4K-2
3528
IP20
HV9783-IP20-60-4K
2835
HV9783-IP20-120-4K
24w/m
46w/m
4000K - IP20 SIDE MOUNTED IMAGE
PART NUMBER
SMD
HV9723-IP20-96SM-4K
335
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
96
520lm
12v DC
7.7w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV9941-5PK HV9941-10PK HV9942-5PK HV9942-10PK
Ezi Tail connectors suitable for 8mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 8mm IP20 LED strip only - 10 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only - 10 pack
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-2003
20mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
384
2022 • Lighting By Havit
Scan QR Code For Havit LED Profile Compatibility Chart
IP54
IP67
INDOOR/OUTDOOR WEATHERPROOF
INDOOR/OUTDOOR WEATHERPROOF
www.Havit.com.au/PCC
5500K - IP67 WEATHERPROOF IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
12x6
9.6w/m
5m
25mm
12x6
1720lm
24v DC 19.2w/m
5m
25mm
14x6
1320lm
12v DC 14.4w/m
5m
50mm
14x6
CUTTING INCREMENT
SIZE WxH (mm)
PART NUMBER
SMD
HV9723-IP67-60-5K
3528
IP67
60
430lm
12v DC
4.8w/m
HV9723-IP67-120-5K
3528
IP67
120
860lm
12v DC
HV9723-IP67-240-5K-1
3528
IP67
240
HV9783-IP67-60-5K
2835
IP67
60
5500K - IP54 WATER RESISTANT IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9723-IP54-60-5K
3528
IP54
60
430lm
12v DC
4.8w/m
5m
50mm
8x3
HV9723-IP54-120-5K
3528
IP54
120
860lm
12v DC
9.6w/m
5m
25mm
8x3
HV9723-IP54-240-5K-1
3528
IP54
240
1720lm
24v DC 19.2w/m
5m
25mm
10x3
HV9783-IP54-60-5K
2835
IP54
60
1320lm
12v DC 14.4w/m
5m
50mm
10x3
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
385
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip 5500K LED Strip Lighting • LED flexible strip light • Dimmable
• Peel and stick backing for initial placement • Beam angle 120 degrees
Scan QR Code For Havit LED Profile Compatibility Chart
IP20 INDOOR USE ONLY
www.Havit.com.au/PCC
5500K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
8x2
9.6w/m
5m
25mm
8x2
1720lm
24v DC 19.2w/m
5m
25mm
10x2
240
1720lm
24v DC 19.2w/m
5m
50mm
14x2
IP20
60
1320lm
12v DC 14.4w/m
5m
50mm
10x2
2835
IP20
120
2200lm
12v DC
5m
25mm
10x2
HV9783-IP20-168-5K
2835
IP20
168
4075lm
24v DC 32.6w/m
5m
83mm
19x2
HV9783-IP20-252-5K
2835
IP20
252
4600lm
24v DC
3m
83mm
39x2
CUTTING INCREMENT
SIZE WxH (mm)
33mm
6x2
PART NUMBER
SMD
HV9723-IP20-60-5K
3528
IP20
60
430lm
12v DC
4.8w/m
HV9723-IP20-120-5K
3528
IP20
120
860lm
12v DC
HV9723-IP20-240-5K-1
3528
IP20
240
HV9723-IP20-240-5K-2
3528
IP20
HV9783-IP20-60-5K
2835
HV9783-IP20-120-5K
24w/m
46w/m
5500K - IP20 SIDE MOUNTED IMAGE
PART NUMBER
SMD
HV9723-IP20-96SM-5K
335
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
96
540lm
12v DC
7.7w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV9941-5PK HV9941-10PK HV9942-5PK HV9942-10PK
Ezi Tail connectors suitable for 8mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 8mm IP20 LED strip only - 10 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only - 10 pack
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-2003
20mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
386
2022 • Lighting By Havit 50 Metre Rolls • • • • •
LED flexible strip light 50m roll Dimmable Peel and stick backing for initial placement Beam angle 120 degrees Supplied with 25x easy connect tails
Scan QR Code For Havit LED Profile Compatibility Chart
IP20 INDOOR USE ONLY
www.Havit.com.au/PCC
3000K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9723-IP20-60-3K-50M
3528
IP20
60
390lm
12v DC
4.8w/m
HV9723-IP20-120-3K-50M
3528
IP20
120
780lm
12v DC
9.6w/m
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
8x2
5m
25mm
8x2
CUTTING INCREMENT
SIZE WxH (mm)
WARRANTY VOID IF MAXIMUM CUT LENGTH EXCEEDS 5 METRES
4000K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9723-IP20-60-4K-50M
3528
IP20
60
410lm
12v DC
4.8w/m
5m
50mm
8x2
HV9723-IP20-120-4K-50M
3528
IP20
120
820lm
12v DC
9.6w/m
5m
25mm
8x2
CUTTING INCREMENT
SIZE WxH (mm)
WARRANTY VOID IF MAXIMUM CUT LENGTH EXCEEDS 5 METRES
5500K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9723-IP20-60-5K-50M
3528
IP20
60
430lm
12v DC
4.8w/m
5m
50mm
8x2
HV9723-IP20-120-5K-50M
3528
IP20
120
860lm
12v DC
9.6w/m
5m
25mm
8x2
WARRANTY VOID IF MAXIMUM CUT LENGTH EXCEEDS 5 METRES HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV9941-5PK HV9941-10PK
Ezi Tail connectors suitable for 8mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 8mm IP20 LED strip only - 10 pack
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
387
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length) All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
Micro LED Strip Lighting • LED flexible strip light • Dimmable
• Peel and stick backing for initial placement • Beam angle 120 degrees
IP20 INDOOR USE ONLY
3000K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5m
33mm
4x2
9.6w/m
5m
33mm
4x2
1150lm
24v DC 14.4w/m
5m
25mm
4x2
1500lm
24v DC 19.2w/m
5m
25mm
4x2
CUTTING INCREMENT
SIZE WxH (mm)
PART NUMBER
SMD
HV9731-IP20-180-3K
2216
IP20
180
390lm
24v DC
4.8w/m
HV9733-IP20-180-3K
2216
IP20
180
780lm
24v DC
HV9734-IP20-240-3K
2216
IP20
240
HV9735-IP20-240-3K
2216
IP20
240
4000K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9731-IP20-180-4K
2216
IP20
180
410lm
24v DC
4.8w/m
5m
33mm
4x2
HV9733-IP20-180-4K
2216
IP20
180
820lm
24v DC
9.6w/m
5m
33mm
4x2
HV9734-IP20-240-4K
2216
IP20
240
1175lm
24v DC 14.4w/m
5m
25mm
4x2
HV9735-IP20-240-4K
2216
IP20
240
1600lm
24v DC 19.2w/m
5m
25mm
4x2
CUTTING INCREMENT
SIZE WxH (mm)
5500K - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9731-IP20-180-5K
2216
IP20
180
430lm
24v DC
4.8w/m
5m
33mm
4x2
HV9733-IP20-180-5K
2216
IP20
180
860lm
24v DC
9.6w/m
5m
33mm
4x2
HV9734-IP20-240-5K
2216
IP20
240
1200lm
24v DC 14.4w/m
5m
25mm
4x2
HV9735-IP20-240-5K
2216
IP20
240
1600lm
24v DC 19.2w/m
5m
25mm
4x2
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
388
2022 • Lighting By Havit
COB LED Strip Lighting • • • •
LED flexible strip light Dimmable Peel and stick backing for initial placement Beam angle 120 degrees
Scan QR Code For Havit LED Profile Compatibility Chart
IP20
www.Havit.com.au/PCC
INDOOR USE ONLY
3000K - IP20 INDOOR IMAGE
PART NUMBER
SMD
HV9761-IP20-512-3K
COB
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
512
1100lm
12v DC
10w/m
CUTTING INCREMENT
SIZE WxH (mm)
31mm
10x2
CUTTING INCREMENT
SIZE WxH (mm)
31mm
10x2
CUTTING INCREMENT
SIZE WxH (mm)
31mm
10x2
CUTTING INCREMENT
SIZE WxH (mm)
5M
4000K - IP20 INDOOR IMAGE
PART NUMBER
SMD
HV9761-IP20-512-4K
COB
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
512
1150lm
12v DC
10w/m
5M
5500K - IP20 INDOOR IMAGE
PART NUMBER
SMD
HV9761-IP20-512-5K
COB
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
512
1200lm
12v DC
10w/m
5M
RGBC & RGBW - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9762-IP20-840-RGBC
CSP
IP20
840
600lm
24v DC
20w/m
5M
50mm
12x2
HV9762-IP20-840-RGBW
CSP
IP20
840
550lm
24v DC
20w/m
5M
50mm
12x2
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGBC & RGBW Models can be used with any RGBC or RGBW Controller in LED Controller section of this catalogue. HV9942-5PK HV9942-10PK
Ezi Tail connectors suitable for 10mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 10mm IP20 LED strip only - 10 pack
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
389
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip 3000K HV9761-IP20-512-3K
4000K HV9761-IP20-512-4K
5500K HV9761-IP20-512-5K
RGBC or RGBW (RED) HV9762-IP20-840-RGBC HV9762-IP20-840-RGBW
RGBC or RGBW (GREEN) HV9762-IP20-840-RGBC HV9762-IP20-840-RGBW
RGBC or RGBW (BLUE) HV9762-IP20-840-RGBC HV9762-IP20-840-RGBW
RGBC or RGBW (3000K) HV9762-IP20-840-RGBC HV9762-IP20-840-RGBW
RGBC or RGBW (5500K) HV9762-IP20-840-RGBC HV9762-IP20-840-RGBW
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
390
2022 • Lighting By Havit
LED Strip Lighting • • • •
LED flexible strip light Dimmable Peel and stick backing for initial placement Beam angle 120 degrees
Scan QR Code For Havit LED Profile Compatibility Chart
IP67
INDOOR/OUTDOOR WEATHERPROOF
www.Havit.com.au/PCC
3000K - IP67 WEATHERPROOF IMAGE
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9768-IP67-280-3K
2220
IP67
280
768lm
24v DC
9.6w/m
HV9769-IP67-280-3K
2220
IP67
280
1150lm
24v DC 14.4w/m
CUTTING INCREMENT
SIZE WxH (mm)
5M
25mm
13x4
5M
25mm
13x4
CUTTING INCREMENT
SIZE WxH (mm)
4000K - IP67 WEATHERPROOF IMAGE
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9768-IP67-280-4K
2220
IP67
280
864lm
24v DC
9.6w/m
5M
25mm
13x4
HV9769-IP67-280-4K
2220
IP67
280
1300lm
24v DC 14.4w/m
5M
25mm
13x4
CUTTING INCREMENT
SIZE WxH (mm)
5500K - IP67 WEATHERPROOF IMAGE
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9768-IP67-280-5K
2220
IP67
280
864lm
24v DC
9.6w/m
5M
25mm
13x4
HV9769-IP67-280-5K
2220
IP67
280
1300lm
24v DC 14.4w/m
5M
25mm
13x4
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
391
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
3000K HV9768-IP67-280-3K
4000K HV9768-IP67-280-4K
5500K HV9768-IP67-280-5K
3000K HV9769-IP67-280-3K
4000K HV9769-IP67-280-4K
5500K HV9769-IP67-280-5K All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
392
2022 • Lighting By Havit
HaviFLEX Flexible Neon LED Strip TM
• • • • •
HaviFLEXTM Neon Flexible LED Strip Dimmable Side bend Beam angle 120 degrees Supplied with 4x mounting clips per metre
IP67
INDOOR/OUTDOOR WEATHERPROOF
3000K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9791-IP67-140-3K
2835
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
140
400lm
24v DC
9.6w/m
CUTTING INCREMENT
SIZE WxH (mm)
50mm
4x8
CUTTING INCREMENT
SIZE WxH (mm)
50mm
4x8
CUTTING INCREMENT
SIZE WxH (mm)
50mm
4x8
5m
4000K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9791-IP67-140-4K
2835
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
140
405lm
24v DC
9.6w/m
5m
5500K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9791-IP67-140-5K
2835
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
140
410lm
24v DC
9.6w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV9791-MC
Mounting clip to suit HaviFLEXTM Flexible LED Strip
HV9791-ALU
Optional Aluminium Channel to suit HV9791 - Custom cut length up to 3m
HV9791-PVC-CHANNEL
White PC Channel to suit HV9791 - Supplied in 1m lengths only
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
393
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip 3000K HV9791-IP67-140-3K
4000K HV9791-IP67-140-4K
5500K HV9791-IP67-140-5K
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
394
2022 • Lighting By Havit HaviFLEX Flexible Neon LED Strip TM
• • • • •
HaviFLEXTM Neon Flexible LED Strip Dimmable Side bend Beam angle 120 degrees Supplied with 4x mounting clips per metre
IP67
INDOOR/OUTDOOR WEATHERPROOF
3000K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9792-IP67-140-3K
2835
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
140
600lm
24v DC 14.4w/m
CUTTING INCREMENT
SIZE WxH (mm)
50mm
6x11
CUTTING INCREMENT
SIZE WxH (mm)
50mm
6x11
CUTTING INCREMENT
SIZE WxH (mm)
50mm
6x11
CUTTING INCREMENT
SIZE WxH (mm)
63mm
6x11
5m
4000K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9792-IP67-140-4K
2835
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
140
630lm
24v DC 14.4w/m
5m
5500K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9792-IP67-140-5K
2835
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
140
660lm
24v DC 14.4w/m
5m
RGB - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9792-IP67-336-RGB
2216
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
336
600lm
24v DC 14.4w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGB Models can be used with any RGB Controller in LED Controller section of this catalogue. HV9792-MC
Mounting clip to suit HaviFLEXTM Flexible LED Strip
HV9792-ALU
Optional Aluminium Channel to suit HV9792 - Custom cut length up to 3m
HV9792-PVC-CHANNEL
White PC Channel to suit HV9792 - Supplied in 1m lengths only
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
395
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
3000K HV9792-IP67-140-3K
4000K HV9792-IP67-140-4K
5500K HV9792-IP67-140-5K
RGB (RED) HV9792-IP67-336-RGB
RGB (GREEN) HV9792-IP67-336-RGB
RGB (BLUE) HV9792-IP67-336-RGB
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
396
2022 • Lighting By Havit
HaviFLEX Flexible Neon LED Strip TM
• • • • •
Flexible NEON LED strip light Dimmable Side bend Beam angle 120 degrees Supplied with 4x mounting clips per metre
IP67
INDOOR/OUTDOOR WEATHERPROOF
3000K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9795-IP67-200-3K
2835
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
120
600lm
24v DC 14.4w/m
CUTTING INCREMENT
SIZE WxH (mm)
50mm
12x17
CUTTING INCREMENT
SIZE WxH (mm)
50mm
12x17
CUTTING INCREMENT
SIZE WxH (mm)
50mm
12x17
CUTTING INCREMENT
SIZE WxH (mm)
62.5mm
12x17
5m
4000K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9795-IP67-200-4K
2835
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
120
620lm
24v DC 14.4w/m
5m
5500K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9795-IP67-200-5K
2835
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
120
650lm
24v DC 14.4w/m
5m
RGBW - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9795-IP67-200-RGBW
2835
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
192
450lm
24v DC 14.4w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue. HV9795-MC
Mounting clip to suit HaviFLEXTM Flexible LED Strip
HV9795-ALU
Optional Aluminium Channel to suit HV9795 - Supplied in 1m length only
HV9795-ALU-BEND
Optional Bendable Channel to suit HV9795 - Supplied in 2x 500mm lengths only
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
397
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
RGBW (RED) HV9795-IP67-200-RGBW
3000K HV9795-IP67-200-3K
RGBW (GREEN) HV9795-IP67-200-RGBW
4000K HV9795-IP67-200-4K
RGBW (BLUE) HV9795-IP67-200-RGBW
5500K HV9795-IP67-200-5K
RGBW (3000K) HV9795-IP67-200-RGBW
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
398
2022 • Lighting By Havit
HaviFLEX Flexible Neon LED Strip TM
• • • • •
Flexible NEON LED strip light Dimmable Top bend Beam angle 120 degrees Supplied with 4x mounting clips per metre
IP67
INDOOR/OUTDOOR WEATHERPROOF
3000K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9796-IP67-200-3K
2835
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
120
600lm
24v DC 14.4w/m
CUTTING INCREMENT
SIZE WxH (mm)
50mm
15x15
CUTTING INCREMENT
SIZE WxH (mm)
50mm
15x15
CUTTING INCREMENT
SIZE WxH (mm)
50mm
15x15
CUTTING INCREMENT
SIZE WxH (mm)
62.5mm
15x15
5m
4000K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9796-IP67-200-4K
2835
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
120
620lm
24v DC 14.4w/m
5m
5500K - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9796-IP67-200-5K
2835
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
120
650lm
24v DC 14.4w/m
5m
RGBW - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9796-IP67-200-RGBW
2835
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
192
450lm
24v DC 14.4w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGBW Models can be used with any RGBW Controller in LED Controller section of this catalogue. HV9796-MC
Mounting clip to suit HaviFLEXTM Flexible LED Strip
HV9796-ALU
Optional Aluminium Channel to suit HV9796 - Supplied in 1m length only
HV9796-ALU-BEND
Optional Bendable Channel to suit HV9796 - Supplied in 2x 500mm lengths only
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
399
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip 3000K HV9796-IP67-200-3K
4000K HV9796-IP67-200-4K
5500K HV9796-IP67-200-5K
RGBW (RED) HV9796-IP67-200-RGBW
RGBW (BLUE) HV9796-IP67-200-RGBW
RGBW (GREEN) HV9796-IP67-200-RGBW
RGBW (3000K) HV9796-IP67-200-RGBW
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
400
2022 • Lighting By Havit
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
Coloured LED Strip Lighting • LED flexible strip light • Peel and stick backing for initial placement • Red, Green and Blue • Beam angle 120 degrees • Dimmable using Havit LED controllers
IP54
INDOOR/OUTDOOR WEATHERPROOF
COLOURED - IP20 INDOOR IMAGE
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
8x2
4.8w/m
5m
50mm
8x2
4.8w/m
5m
50mm
8x2
CUTTING INCREMENT
SIZE WxH (mm)
50mm
8x3
CUTTING INCREMENT
SIZE WxH (mm)
50mm
14x6
PART NUMBER
SMD
HV9723-IP20-60-R
3528
IP20
Red
143lm
12v DC
4.8w/m
HV9723-IP20-60-G
3528
IP20
Green
269lm
12v DC
HV9723-IP20-60-B
3528
IP20
Blue
66lm
12v DC
BLUE - IP54 WATER RESISTANT IMAGE
PART NUMBER
SMD
HV9723-IP54-60-B
3528
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP54
Blue
66lm
12v DC
4.8w/m
5m
BLUE - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9723-IP67-60-B
3528
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
Blue
66lm
12v DC
4.8w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. HV9941-5PK HV9941-10PK
Ezi Tail connectors suitable for 8mm IP20 LED strip only- 5 pack Ezi Tail connectors suitable for 8mm IP20 LED strip only - 10 pack
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
401
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
Side Mounted LED Strip Lighting • •
LED flexible strip light • Dimmable using Havit LED controllers •
Peel and stick backing for initial placement Beam angle 120 degrees
IP20 INDOOR USE ONLY
3000K - IP20 SIDE MOUNTED IMAGE
PART NUMBER
SMD
HV9723-IP20-96SM-3K
335
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
96
500lm
12v DC
7.7w/m
CUTTING INCREMENT
SIZE WxH (mm)
33mm
6x2mm
CUTTING INCREMENT
SIZE WxH (mm)
33mm
6x2
CUTTING INCREMENT
SIZE WxH (mm)
33mm
6x2
CUTTING INCREMENT
SIZE WxH (mm)
5m
4000K - IP20 SIDE MOUNTED IMAGE
PART NUMBER
SMD
HV9723-IP20-96SM-4K
335
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
96
520lm
12v DC
7.7w/m
5m
5500K - IP20 SIDE MOUNTED IMAGE
PART NUMBER
SMD
HV9723-IP20-96SM-5K
335
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
96
540lm
12v DC
7.7w/m
5m
COLOURED - IP20 INDOOR IMAGE
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9723-IP20-96SM-R
335
IP20
Red
179lm
12v DC
7.7w/m
5m
33mm
6x2
HV9723-IP20-96SM-G
335
IP20
Green
350lm
12v DC
7.7w/m
5m
33mm
6x2
HV9723-IP20-96SM-B
335
IP20
Blue
92lm
12v DC
7.7w/m
5m
33mm
6x2
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
402
2022 • Lighting By Havit
CT LED Strip Lighting • LED flexible strip light • 3000K + 5500K together on one strip
• Must be used with CT Controllers • Peel and stick backing for initial placement • Beam angle 120 degrees
Scan QR Code For Havit LED Profile Compatibility Chart
IP20 INDOOR USE ONLY
www.Havit.com.au/PCC
CT - 3000K + 5500K - IP20 INDOOR IMAGE
PART NUMBER
SMD
HV9783-IP20-120-CT
2835
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
120
1560lm
12v DC 14.4w/m
CUTTING INCREMENT
SIZE WxH (mm)
50mm
10x2
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. CT Models can be used with any CT Controller in LED Controller section of this catalogue. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
403
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
IP65
INDOOR/OUTDOOR WEATHERPROOF
Signage Modules IMAGE
IP LED LUMENS WATTAGE MAX NO. RATING PER METRE PER METRE VOLTAGE PER METRE MODULES
PART NUMBER
SMD
HV9794-IP65-10-3K
5050
IP65
3000K
650lm
12v DC
0.72w
HV9794-IP65-10-5K
5050
IP65
5000K
670lm
12v DC
0.72w
HV9794-IP65-10-RGB
5050
IP65
RGB
210lm
12v DC
0.72w
HV9794-IP65-20-3K
5050
IP65
3000K
1300lm
12v DC
0.72w
HV9794-IP65-20-5K
5050
IP65
5000K
1340lm
12v DC
0.72w
HV9794-IP65-20-RGB
5050
IP65
RGB
420lm
12v DC
0.72w
20 Modules 20 Modules 20 Modules 20 Modules 20 Modules 20 Modules
CUTTING INCREMENT
SIZE LxWxH (mm)
10
84x16x6
10
84x16x6
10
84x16x6
20
84x16x6
20
84x16x6
20
84x16x6
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGB Models can be used with any RGB Controller in LED Controller section of this catalogue. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
404
2022 • Lighting By Havit Multi Colour RGB LED Strip Lighting • LED flexible strip light • Peel and stick backing for initial placement • Colours selected using Havit LED controllers • Beam angle 120 degrees
RGB - IP20 INDOOR IMAGE
PART NUMBER
SMD
HV9750-IP20-30-RGB
5050
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
30
585lm
12v DC 7.2w/m
CUTTING INCREMENT
SIZE WxH (mm)
100mm
10x2
CUTTING INCREMENT
SIZE WxH (mm)
100mm
10x3
CUTTING INCREMENT
SIZE WxH (mm)
100mm
12x6
CUTTING INCREMENT
SIZE WxH (mm)
50mm
10x2
5m
RGB - IP54 WATER RESISTANT IMAGE
PART NUMBER
SMD
HV9750-IP54-30-RGB
5050
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP54
30
585lm
12v DC 7.2w/m
5m
RGB - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9750-IP67-30-RGB
5050
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
30
585lm
12v DC 7.2w/m
5m
CHASING MULTICOLOUR - IP54 WATER RESISTANT IMAGE
PART NUMBER
SMD
HV9750-IP54-60-CHRGB
5050
IP LED LUMENS WATTAGE MAX RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP54
60
585lm
12v DC
8w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver.
RGB Models can be used with any RGB Controller in LED Controller section of this catalogue.
HV9102-SPI-16S+M16S
For use with Havit chasing RGB strip. 3v Battery (CR2032) Output signal: 2.4ghz Transmitting range: 30m approx Input Voltage: 12v DC or 24v DC
12v DC 108w 24v DC 216w
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
405
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
406
2022 • Lighting By Havit Multi Colour RGBC & RGBW LED Strip Lighting • •
LED flexible strip light Colours selected using Havit LED controllers
• •
Peel and stick backing for initial placement Beam angle 120 degrees RGBC
RGBW
+5500K
+3000K
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
RGBC & RGBW - IP20 INDOOR IMAGE
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9751-IP20-60-RGBC
5050
IP20
60
600lm
12v DC 14.4w/m
HV9751-IP20-60-RGBW
5050
IP20
60
550lm
12v DC 14.4w/m
CUTTING INCREMENT
SIZE WxH (mm)
5m
50mm
12x2
5m
50mm
12x2
CUTTING INCREMENT
SIZE WxH (mm)
RGBC & RGBW - IP54 WATER RESISTANT IMAGE
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9751-IP54-60-RGBC
5050
IP54
60
600lm
12v DC 14.4w/m
5m
50mm
12x3
HV9751-IP54-60-RGBW
5050
IP54
60
550lm
12v DC 14.4w/m
5m
50mm
12x3
CUTTING INCREMENT
SIZE WxH (mm)
RGBC & RGBW - IP67 WEATHERPROOF IMAGE
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
PART NUMBER
SMD
HV9751-IP67-60-RGBC
5050
IP67
60
600lm
12v DC 14.4w/m
5m
50mm
14x6
HV9751-IP67-60-RGBW
5050
IP67
60
550lm
12v DC 14.4w/m
5m
50mm
14x6
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGBC & RGBW Models can be used with any RGBC & RGBW Controller in LED Controller section of this catalogue. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
407
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
408
2022 • Lighting By Havit Multi Colour RGBCW LED Strip Lighting • •
LED flexible strip light Colours selected using Havit LED controllers
• •
Peel and stick backing for initial placement Beam angle 120 degrees RGBCW
Scan QR Code For Havit LED Profile Compatibility Chart
+3000K +5500K
www.Havit.com.au/PCC
RGBCW - IP20 INDOOR IMAGE
PART NUMBER
SMD
HV9752-IP20-60-RGBCW
5050
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
60
500lm
24v DC
24w/m
CUTTING INCREMENT
SIZE WxH (mm)
100mm
14x2
CUTTING INCREMENT
SIZE WxH (mm)
100mm
14x3
CUTTING INCREMENT
SIZE WxH (mm)
100mm
16x6
CUTTING INCREMENT
SIZE WxH (mm)
100mm
14x2
5m
RGBCW - IP54 WATER RESISTANT IMAGE
PART NUMBER
SMD
HV9752-IP54-60-RGBCW
5050
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP54
60
500lm
24v DC
24w/m
5m
RGBCW - IP67 WEATHERPROOF IMAGE
PART NUMBER
SMD
HV9752-IP67-60-RGBCW
5050
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP67
60
500lm
24v DC
24w/m
5m
RGBCW - IP20 INDOOR IMAGE
PART NUMBER
SMD
HV9752-IP20-96-RGBCW
5050
WATTAGE MAX IP LED LUMENS RATING PER METRE PER METRE VOLTAGE PER METRE LENGTH
IP20
96
500lm
24v DC
24w/m
5m
HAVIT COMPATIBLE ACCESSORIES See pages 315-324 for compatible drivers. All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver. RGBCW Models can be used with any RGBCW Controller in LED Controller section of this catalogue. ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
HV9705-1603
16mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
CUSTOM CUT ORDERS AVAILABLE
All custom cut orders require minimum of 48hrs production time from order confirmation, plus delivery time.
409
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
410
2022 • Lighting By Havit 4.8w VIPER Strip Kits • • • • •
Viper LED flexible strip light kits Dimmable using Havit LED controllers Peel and stick backing for initial placement Complete with LED driver with flex and plug Beam angle 120 degrees
4.8W 3000K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
VOLTAGE
POWER
TOTAL WATTAGE
+
2 mtr
VPR9733IP54-60-2M
3528
IP54
60
390lm
12v DC
4.8w/m
9.6w
+
5 mtr
VPR9733IP54-60-5M
3528
IP54
60
390lm
12v DC
4.8w/m
24w
+
10 mtr
VPR9733IP20-60-10M
3528
IP20
60
390lm
24v DC
4.8w/m
48w
+
10 mtr
VPR9733IP54-60-10M
3528
IP54
60
390lm
24v DC
4.8w/m
48w
VOLTAGE
POWER
TOTAL WATTAGE
4.8W 4000K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
+
2 mtr
VPR9735IP54-60-2M
3528
IP54
60
410lm
12v DC
4.8w/m
9.6w
+
5 mtr
VPR9735IP54-60-5M
3528
IP54
60
410lm
12v DC
4.8w/m
24w
+
10 mtr
VPR9735IP20-60-10M
3528
IP20
60
410lm
24v DC
4.8w/m
48w
+
10 mtr
VPR9735IP54-60-10M
3528
IP54
60
410lm
24v DC
4.8w/m
48w
VOLTAGE
POWER
TOTAL WATTAGE
4.8W 5500K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
+
2 mtr
VPR9734IP54-60-2M
3528
IP54
60
430lm
12v DC
4.8w/m
9.6w
+
5 mtr
VPR9734IP54-60-5M
3528
IP54
60
430lm
12v DC
4.8w/m
24w
+
10 mtr
VPR9734IP20-60-10M
3528
IP20
60
430lm
24v DC
4.8w/m
48w
+
10 mtr
VPR9734IP54-60-10M
3528
IP54
60
430lm
24v DC
4.8w/m
48w
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
411
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
412
2022 • Lighting By Havit 9.6w VIPER Strip Kits • • • • •
Viper LED flexible strip light kits Dimmable using Havit LED controllers Peel and stick backing for initial placement Complete with LED driver with flex and plug Beam angle 120 degrees
9.6W 3000K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
VOLTAGE
POWER
TOTAL WATTAGE
+
2mtr
VPR9743IP54-120-2M
3528
IP54
120
780lm
24v DC
9.6w/m
19.2w
+
5mtr
VPR9743IP54-120-5M
3528
IP54
120
780lm
24v DC
9.6w/m
48w
+
10mtr
VPR9743IP20-120-10M
3528
IP20
120
780lm
24v DC
9.6w/m
96w
+
10mtr
VPR9743IP54-120-10M
3528
IP54
120
780lm
24v DC
9.6w/m
96w
VOLTAGE
POWER
TOTAL WATTAGE
9.6W 4000K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
+
2mtr
VPR9745IP54-120-2M
3528
IP54
120
810lm
24v DC
9.6w/m
19.2w
+
5mtr
VPR9745IP54-120-5M
3528
IP54
120
810lm
24v DC
9.6w/m
48w
+
10mtr
VPR9745IP20-120-10M
3528
IP20
120
810lm
24v DC
9.6w/m
96w
+
10mtr
VPR9745IP54-120-10M
3528
IP54
120
810lm
24v DC
9.6w/m
96w
VOLTAGE
POWER
TOTAL WATTAGE
9.6W 5500K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
+
2mtr
VPR9744IP54-120-2M
3528
IP54
120
830lm
24v DC
9.6w/m
19.2w
+
5mtr
VPR9744IP54-120-5M
3528
IP54
120
830lm
24v DC
9.6w/m
48w
+
10mtr
VPR9744IP20-120-10M
3528
IP20
120
830lm
24v DC
9.6w/m
96w
+
10mtr
VPR9744IP54-120-10M
3528
IP54
120
830lm
24v DC
9.6w/m
96w
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
413
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
414
2022 • Lighting By Havit
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
14.4w VIPER Strip Kits • • • • •
Viper LED flexible strip light kits Dimmable using Havit LED controllers Peel and stick backing for initial placement Complete with LED driver with flex and plug Beam angle 120 degrees
14.4W 3000K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
VOLTAGE
POWER
TOTAL WATTAGE
+
2 mtr
VPR9783IP54-60-2M
2835
IP54
60
1200lm
12v DC
14.4w/m
28.8w
+
5 mtr
VPR9783IP54-60-5M
2835
IP54
60
1200lm
12v DC
14.4w/m
72w
VOLTAGE
POWER
TOTAL WATTAGE
14.4W 4000K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
+
2 mtr
VPR9785IP54-60-2M
2835
IP54
60
1260lm
12v DC
14.4w/m
28.8w
+
5 mtr
VPR9785IP54-60-5M
2835
IP54
60
1260lm
12v DC
14.4w/m
72w
VOLTAGE
POWER
TOTAL WATTAGE
14.4W 5500K LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
+
2 mtr
VPR9784IP54-60-2M
2835
IP54
60
1320lm
12v DC
14.4w/m
28.8w
+
5 mtr
VPR9784IP54-60-5M
2835
IP54
60
1320lm
12v DC
14.4w/m
72w
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
415
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Strip
Scan QR Code For Havit LED Profile Compatibility Chart www.Havit.com.au/PCC
10w COB VIPER Strip Kits • • • • •
Viper LED flexible strip light kits Dimmable using Havit LED controllers Peel and stick backing for initial placement Complete with LED driver with flex and plug Beam angle 120 degrees
IP20 INDOOR USE ONLY
10W 3000K COB LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
VOLTAGE
POWER
TOTAL WATTAGE
+
2mtr
VPR9763IP20-512-2M
COB
IP20
512
1100lm
12v DC
10w/m
20w
+
5mtr
VPR9763IP20-512-5M
COB
IP20
512
1100lm
12v DC
10w/m
50w
VOLTAGE
POWER
TOTAL WATTAGE
10W 4000K COB LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
+
2mtr
VPR9765IP20-512-2M
COB
IP20
512
1150lm
12v DC
10w/m
20w
+
5mtr
VPR9765IP20-512-5M
COB
IP20
512
1150lm
12v DC
10w/m
50w
VOLTAGE
POWER
TOTAL WATTAGE
10W 5500K COB LED STRIP LIGHTING KITS IMAGE
LENGTH
PART NUMBER
SMD
PER LUMENS IP RATING LED METRE PER METRE
+
2mtr
VPR9764IP20-512-2M
COB
IP20
512
1200lm
12v DC
10w/m
20w
+
5mtr
VPR9764IP20-512-5M
COB
IP20
512
1200lm
12v DC
10w/m
50w
ALL LED STRIP MUST BE INSTALLED ON AN ALUMINIUM HEAT DISSIPATING SURFACE HV9705-1003
10mm x 3mm Aluminum Heat Sink per metre (Max: 3 metre length)
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
416
2022 • Lighting By Havit RGB LED Globe & Remote Control • • • • •
5w RGB LED Supplied with multi function IR remote 16 colours in one 21 colour change mode 30˚ Beam angle
IMAGE
Φ49
Φ50
54mm 60mm
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV95021-12V
Multi Colour
NA
RGB, 5w LED 12v DC MR16
HV95021-240V
Multi Colour
NA
RGB, 5w LED 240v GU10
14
2w G9 LED Globes • •
33
Direct replacement for halogen G9 180˚ beam angle IMAGE
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9511C
5500k
130lm
2w LED 240v G9
HV9511W
3000K
120lm
2w LED 240v G9
3w MR11 LED Globes • •
35
E nergy saving 2w LED globe 60° beam angle IMAGE
46
27
34
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9311C
5500k
310lm
3w LED 12v DC MR11
HV9311N
4000K
300lm
3w LED 12v DC MR11
HV9311W
3000K
270lm
3w LED 12v DC MR11 60
A60 LED Filament Globe • •
108
Triac Dimmable 240 E27 8w IMAGE
417
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9569C
5500k
810lm
8w LED 240v E27
HV9569N
4000K
805lm
8w LED 240v E27
HV9569W
2700K
800lm
8w LED 240v E27
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Globes
ø50
ø50 CW/NW/WW
Tri-Colour By Havit
CW/NW/WW
3000K
50
60
4000K 5500K
7W/5W/3W
Tri-Colour 9in1 LED Globe • • • • •
7W/5W/3W
NEW 9in1 Tri-Colour Globes 3 Power Settings 3W - 5W -7W
3w, 5w & 7w option all in one globe Tri-Colour + 3 Power settings 9in1 Ability to select 3000K, 4000K and 5500K 60˚ Beam angle Triac Dimmable (HV9506D Only) IMAGE
PART NUMBER
Available in 240V 12V DC 24V DC 3 Colour Temperatures 3000K-4000K-5500K
POWER 3W
HV9506D
5W 7W
IMAGE
PART NUMBER
POWER 3W
HV9507
5W 7W
IMAGE
PART NUMBER
POWER 3W
HV9508
5W 7W
COLOUR TEMP
LUMENS
3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240lm 255lm 270lm 400lm 425lm 450lm 560lm 595lm 630lm
COLOUR TEMP
LUMENS
3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240lm 255lm 270lm 400lm 425lm 450lm 560lm 595lm 630lm
COLOUR TEMP
LUMENS
3000K 4000K 5500K 3000K 4000K 5500K 3000K 4000K 5500K
240lm 255lm 270lm 400lm 425lm 450lm 560lm 595lm 630lm
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
INPUT 240v 240v 240v INPUT 12v DC 12v DC 12v DC INPUT 24v DC 24v DC 24v DC
418
2022 • Lighting By Havit G4 High Output Bi Pin LED Globes • 1.4w, 1.5w, 3.2w & 5w SMD LED • Beam angle: 180˚
18
Ø13 23
22
9.4
42
42
35
34 11
1.4w
IMAGE
419
1.5w
1.5w
3.2w
3.2w
PART NUMBER
COLOUR TEMP.
OUTPUT
POWER
HV9523
5500K
110lm
1.4w LED 12v DC
HV9523-1.5W
5500K
110lm
1.5w LED 12v DC
HV9523-3.2W
5500K
260lm
3.2w LED 12v DC
HV9523-5W
5500K
400lm
5w LED 12v DC
HV9525
Red
NA
1.4w LED 12v DC
HV9526
Yellow
NA
1.4w LED 12v DC
HV9527
Green
NA
1.4w LED 12v DC
HV9528
Blue
NA
1.4w LED 12v DC
HV9529
3000K
90lm
1.4w LED 12v DC
HV9529-1.5W
3000K
90lm
1.5w LED 12v DC
HV9529-3.2W
3000K
240lm
3.2w LED 12v DC
HV9529-5W
3000K
360lm
5w LED 12v DC
5w
5w
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
LED Globes 5w COB High Output LED Globes • 5w COB LED • Aluminium body • Beam angle: 60˚ 51
IMAGE
IMAGE
Ø50
Ø50
45
56
53
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9555C
5500K
370lm
Dimmable 5w LED 240v GU10
HV9555C-4K
4000K
355lm
Dimmable 5w LED 240v GU10
HV9555W
3000K
340lm
Dimmable 5w LED 240v GU10
HV9555B
Blue
NA
Dimmable Blue, 5w LED 240v GU10
HV9555G
Green
NA
Dimmable Green, 5w LED 240v GU10
HV9555R
Red
NA
Dimmable Red, 5w LED 240v GU10
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9557C
5500K
370lm
5w LED 12v DC MR16
HV9557C-4K
4000K
355lm
5w LED 12v DC MR16
HV9557W
3000K
340lm
5w LED 12v DC MR16
HV9557B
Blue
NA
Blue, 5w LED 12v DC MR16
HV9557G
Green
NA
Green, 5w LED 12v DC MR16
HV9557R
Red
NA
Red, 5w LED 12v DC MR16
6w Adjustable Beam LED Globes • • • • • • •
Ø50
6w MR16 LED Globe Non-Dimmable Adjustable Beam Angle: 20°, 40°, 60° Input Voltage: 12v DC Colour Temp: 2700k Lumens: 500lm IP Rating: IP20 IMAGE
52
PART NUMBER
COLOUR TEMP
OUTPUT
POWER
HV9559W
2700K
500lm
6w LED 12v MR16
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
420
2022 • Lighting By Havit Bar Canopies by Havit • Surface mount weight limit: 2kg • House LED Drivers when used with pendants
Scan QR Code For Havit Canopy and LED Driver Compatibility www.Havit.com.au/BCD
500x50x40mm Rectangular Surface Mount Canopy
HV9705-5050-SCH 500x50x40mm Rectangular Surface Mount Canopy
HV9705-5050-WHT 500x50x40mm Rectangular Surface Mount Canopy
HV9705-5050-BLK 800x50x40mm Rectangular Surface Mount Canopy
HV9705-5080-SCH 800x50x40mm Rectangular Surface Mount Canopy
HV9705-5080-WHT 800x50x40mm Rectangular Surface Mount Canopy
HV9705-5080-BLK
421
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Canopies Canopies by Havit • Surface mount weight limit: 2kg • Recessed weight limit: 1kg • Recessed cut out: 90mm 70mm Round Surface Mount
70mm Round Surface Mount
70mm Round Surface Mount
HV9705-7023-BLK
HV9705-7023-SCH
HV9705-7023-WHT
100mm Round Surface Mount
100mm Round Surface Mount
100mm Round Surface Mount
HV9705-9025-BLK-RND
HV9705-9025-SCH-RND
HV9705-9025-WHT-RND
100x100mm Square Surface Mount
100x100mm Square Surface Mount
100x100mm Square Surface Mount
HV9705-9025-BLK-SQ
HV9705-9025-SCH-SQ
HV9705-9025-WHT-SQ
100mm Round Recessed 90mm cutout
100mm Round Recessed 90mm cutout
100mm Round Recessed 90mm cutout
HV9705-9005-BLK-RND
HV9705-9005-SCH-RND
HV9705-9005-WHT-RND
100x100mm Square Recessed 90mm cutout
100x100mm Square Recessed 90mm cutout
100x100mm Square Recessed 90mm cutout
HV9705-9005-BLK-SQ
HV9705-9005-SCH-SQ
HV9705-9005-WHT-SQ
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
422
2022 • Lighting By Havit Accessories IMAGE
PART NUMBER
HV1437-TOP
HV350-SPK
DESCRIPTION
Replacement glass to suit HV1437 & HV1438
Optional garden spike to suit: HV1494C, HV1494W and HV1494RGB
IP RATING
NA
NA
85
400
HV1607
• • • •
HV9971
• Maintenance kit recommended for all stainless steel luminaires • Kit will clean and protect
NA
HV9911
• • • • • •
Suitable Wires 22-10AWG / 0.3247-5.26 mm² Waterproof and corrosion proof-IP67. Pre-filled non hardening silicone gel Eliminates need for heat shrink, tape or sealants. Can be used with 12v DC or 24v DC
IP67
HV9912
• • • • • •
Suitable Wires 22-8AWG / 0.3247-8.37 mm² Waterproof and corrosion proof-IP67. Pre-filled non hardening silicone gel Eliminates need for heat shrink, tape or sealants. Can be used with 12v DC or 24v DC
IP67
HV9913
• • • • • •
Suitable Wires 22-6AWG / 0.3247-13.3 mm² Waterproof and corrosion proof-IP67. Pre-filled non hardening silicone gel Eliminates need for heat shrink, tape or sealants. Can be used with 12v DC or 24v DC
IP67
HV9905
• Junction Box • IP Rating: IP65
Bollard spike High grade stainless steel 400mm Length Includes stainless steel base plate
NA
32
423
IP65
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
Accessories Accessories IMAGE
x10
PART NUMBER
DESCRIPTION
IP RATING
HV9941-5PK
Ezi Tail connector to suit IP20 8mm LED Strip - 5 Pack
IP20
HV9941-10PK
Ezi Tail connector to suit IP20 8mm LED Strip - 10 Pack
IP20
HV9942-5PK
Ezi Tail connector to suit IP20 10mm LED Strip - 5 Pack
IP20
HV9942-10PK
Ezi Tail connector to suit IP20 10mm LED Strip - 10 Pack
IP20
HV9945-10PK
Ezi Tail connector to suit IP20 RGBC & RGBW LED Strip - 10 Pack
IP20
HV9705-9955
2 core low voltage suspension cable to suit HV9705-9956
IP20
HV9705-9956
Suspension kit to suit HV9705-9955
IP20
HV9981
Red & Black Low Voltage Cable - per metre
IP20
HV9982
RGB Low Voltage Cable - per metre
IP20
HV9983
RGBC / W Low Voltage Cable - per metre
IP20
HV9984
2 Core Clear Low Voltage Cable - per metre
IP20
HV9985
3 Core Clear Cable - per metre
IP20
HV9985-BLK
3 Core Black Cable - per metre
IP20
HV9985-WHT
3 Core White Cable - per metre
IP20
HV9986
3 Core Low Voltage CT Cable
IP20
HV9988
5 Core cable clear - per metre
IP20
HV9988-BLK
5 core cable black - per metre
IP20
HV9988-WHT
5 core cable white - per metre
IP20
All low voltage products that specify an input of 12v or 24v DC must be used with a suitable LED driver, refer to pages 315 - 324 Lumen output measured at source. All globes supplied with fittings are non dimmable. If you require 240v dimmable globes refer to page 418 & 420
www.havit.com.au
424
2022 • Lighting By Havit IP (INGRESS PROTECTION) RATINGS GUIDE WATER
SOLIDS Protected against a solid object greater than 50mm, such as a hand
1
Protected against vertically falling drops of water. Limited ingress permitted
1
2
Protected against vertically falling drops of water with o enclosure tilted 15 from vertical. Limited ingress permitted
2
3
Protected against sprays o to 60 from the vertical. Limited ingress permitted
3
4
Protected against water splashed from all directions. Limited ingress permitted
4
Dust protected. Limited ingress of dust permitted
5
Protected against jets of water. Limited ingress permitted
5
Dust Tight. Zero ingress of dust permitted
6
Protected against strong jets of water. Limited ingress permitted
6
Protected against the effects of immersion between 15cm and 1m for up to 1hr
7
Protected against long periods of immersion under pressure
8
Protected against a solid object greater than 12.5mm, such as a finger Protected against a solid object greater than 2.5mm, such as a screwdriver Protected against a solid object greater than 1.0mm, such as a wire
IP 67
INGRESS PROTECTION
Chart for reference only. Please refer to AS60529. Diagrams used to illustrate the IP Rating do not have any relation to standards or the IP Rating system and should only be used as a guide.
425
www.havit.com.au
Lighting by Havit IK RATINGS GUIDE IK Ratings is the measurement of an object being dropped or fallen onto a fitting from a certain distance and up to a certain weight without the glass breaking.
IK CODE
00
No Protection
01
Protected against impact of object with weight of up to 0.25kg mass dropped from 56mm above the impacted surface.
02
Protected against impact of object with weight of up to 0.25kg mass dropped from 80mm above the impacted surface.
03
Protected against impact of object with weight of up to 0.2kg mass dropped from 140mm above the impacted surface.
04
Protected against impact of object with weight of up to 0.25kg mass dropped from 200mm above the impacted surface.
05
Protected against impact of object with weight of up to 0.25kg mass dropped from 280mm above the impacted surface.
06
Protected against impact of object with weight of up to 0.25kg mass dropped from 400mm above the impacted surface.
07
Protected against impact of object with weight of up to 0.5kg mass dropped from 400mm above the impacted surface.
08
Protected against impact of object with weight of up to 1.7kg mass dropped from 300mm above the impacted surface.
09
Protected against impact of object with weight of up to 5kg mass dropped from 200mm above the impacted surface.
10
Protected against impact of object with weight of up to 5kg mass dropped from 400mm above the impacted surface.
www.havit.com.au
426
2022 • Lighting By Havit Warranty Terms & Conditions 3 Years LIMITED REPLACEMENT WARRANTY 1. Warranty Period HAVIT LIGHTING offers a 3 Years limited replacement warranty on products that fail due to defective materials or workmanship. The warranty period begins from the date of purchase. 2. Warranty Terms and Conditions The warranty period starts on the date the goods are purchased from an authorised Havit Lighting retailer. All fittings must be installed by a licensed electrician, as required by law. The product must only be used in accordance with Havit Lighting specifications, guidelines and instructions. 3. Limited Warranty The warranty as described only applies to Havit Lighting products. The warranty is only applicable to the party purchasing the products. Havit Lighting warrants that each product will be free from defects in material and workmanship. If a replacement is required under warranty, proof of purchase (such as the original dated purchase receipt) from an authorised HAVIT LIGHTING retailer is required to make a warranty claim. Proof of installation for products installed by a licensed electrician is also required for replacement under warranty. 4. Balance of Warranty To the maximum extent permitted by law, any replaced products by HAVIT LIGHTING are covered only by the balance of the warranty period remaining from the date of purchase of the original HAVIT LIGHTING product. 5. Limited Replacement Warranty In addition to the limited warranty terms set out under section (3), the following will apply. Where a consumer asserts that a product installed is faulty, and a HAVIT LIGHTING service agent has attended the property, A SERVICE CALL FEE WILL BE CHARGED TO THE CONSUMER IF: • The product is not a HAVIT LIGHTING product. • There is nothing wrong with the product or to the extent that the failure is not a failure of the product to perform in accordance with its published features and specifications as reasonably determined by HAVIT LIGHTING. • The original installation of the product was not carried out by a licensed electrician. • The installation is not performed in accordance with the relevant HAVIT LIGHTING product installation instructions. • The defects have been caused by incorrect application, abuse or misuse by the consumer. 6. Cancellations, Returns & Credit Claims 6.1 Cancellations – No cancellations or partial cancellation of an order, where the goods to be supplied are “special or project items” shall be accepted by HAVIT LIGHTING unless it has first agreed in writing to such cancellation or partial cancellation. 6.2 Short Deliveries – All claims made against short deliveries must be made in writing within 14days of delivery, no claims for short delivery will be recognised after this time. The purchaser shall be responsible insuring that the total number of cartons delivery corresponds exactly with the couriers consignment note. HAVIT LIGHTING will not be responsible for any such short deliveries.
• • • • • • •
•
street lights and other devices may cause an intermittent humming noise in your product. Filters for blocking/reducing such signals are available in Australia at the customer’s expense. These noises do not indicate the product is faulty. Damage caused by alternative power systems (for example: solar inverters, etc.). Water damage of any kind caused by inappropriate placement of fittings not IP rated for that location. The cost of renting, obtaining and using special access equipment (i.e. scaffoldings, scissor lifts, etc.) for accessing products installed at a height of greater than 3.0 metres. Travelling costs incurred by HAVIT LIGHTING personnel or service agents travelling greater than 25km from an authorised service agent. Non-structural corrosion damage of 316 Stainless Steel components such as surface rust, Tea Staining is not covered under warranty • Corrosion or rust occurring on Aluminium, 304 grade stainless steel, Antique Brass and Graphite coloured fittings that have been installed within 5km of any salt water environment. • LED fittings must not be installed on same circuit as fluorescent lighting, exhaust fans, bathroom 3 in 1 units, ovens and microwaves. Having these installed on the same circuit with LED light fittings will void warranty. If not installed using Havit Lighting LED Drivers, Other brand drivers must have below protections for Warranty to Apply • Short Circuit • Over Heating • Over Voltage • Over Load
8. Commercial Use The warranty period for HAVIT LIGHTING products designated as Commercial use is specified in the instruction leaflet supplied with the light fitting. All other HAVIT LIGHTING products are designed for domestic use. Where products designed for domestic use are used in a commercial environment/ commercial premises one third of the domestic warranty (8-month warranty) applies. Commercial use means that the products can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise, the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. 9. Making a Warranty Claim For limited replacement warranty: Please return the faulty HAVIT LIGHTING product together with a copy of the proof of purchase and a proof of installation as required by law from the electrician. To the maximum extent permitted by law, the customer must bear the costs and expenses of claiming under this warranty, including but not limited to the cost incurred in freight, postage, handling, travel, dismantling or reinstalling the product. These Warranty Terms and Conditions may change at anytime. Please visit www.havit.com.au for updated version. GUIDELINES
7. Limitations and Conditions This is a limited warranty and excludes, among other items, installation, incidental and consequential damages, other extended costs and is further defined by the limitation and conditions set out below. Subject to Consumer Rights, but otherwise to the maximum extent permitted by law, the HAVIT LIGHTING warranties provided in this document will not cover the following: • Products that are not purchased from an authorised reseller and not installed in Australia. • Products where installation was not carried out by a licensed electrician as required. • Products not installed in accordance with the product’s installation instructions or specifications. • Products not used in accordance with the instructions for use or specifications. • Defect, damage or failure to a product resulting from misuse, accident, neglect, abuse, tampering, modifications or unauthorised repairs being carried out. • Damages not caused by a fault in the product materials or workmanship. • Defect, damage or failure to a product resulting from any acts of God, including damages from lightning, power grid fluctuations, or power surges. • Replacement of light sources unless specified. • Replacement of batteries supplied with certain products. • Power supply “noise”, intermittent “humming” or other influences from mains power delivery infrastructure. Signals sent through the power grid by the electricity provider for the control of off-peak hot water,
427
www.havit.com.au
LED Strip Must be installed on an aluminium heat sink or aluminium profile. Must be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise, the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Can only be used with maximum continuous run specified in catalogue. Must be operated in temperatures of 0° to 50°. Must be installed as per installation instructions supplied with LED strip (if not supplied these instructions can be obtained through the Havit Lighting website or by contacting Havit Lighting sales dept.), including using static bands and applied to cleaned surfaces. LED Drivers Must be well ventilated with min ambient operating temp to be at 2° and max ambient operating temp at 50°. Humidity to be no greater than 55%. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12 hrs per day for 3 Years warranty to apply. Otherwise, the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Voltage supply must be within range of 220V – 240V ± 2%. Drivers are not covered by the effect of off-peak power supply from electrical supply companies.
Lighting by Havit Aluminium Profile Must not be used in applications where supplied structure of profile is manipulated causing fatigue to profile and failure to create correct heat sink factors as well as diffuser seating. All cuts are precise to Havit Lighting measuring equipment but lengths inside of measurements supplied within 5% are considered within acceptable variable limitations and will not be recut. Custom Cut lengths will have allowance for installation of end caps, EG 2000mm will be cut at 1995mm. LED Strip Controllers Must be well ventilated. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Must be operated between temperatures of 0° to 50°. LED Downlights Must be well ventilated. Must be used with supplied cables. No alterations are permitted including extension of leads from power to driver and/or leads from driver to light fitting, otherwise warranty is void. Must be installed with flex and plug supplied. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Proline Pendants Must be used with supplied cables. No alterations are permitted including extension of leads from power to driver, otherwise warranty is void. Run cannot exceed more than 24m. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Garden Lights Must be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. No more than 25m from driver to last fittings installed in 1 continuous run to avoid any voltage drop. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Complimentary LED Globes supplied in Garden Lights have a 12 month replacement warranty. Outdoor Wall Lighting Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Low Voltage models must also be used with correct 12v DC Power supply with allowance of 30% from maximum load of LED Driver and installed No more than 25m from driver to last fittings in 1 continuous run to avoid any voltage drop. Complimentary LED Globes supplied in Garden Lights have a 12 month replacement warranty. Outdoor Step Lighting Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Low Voltage models must also be used with correct 12v DC Power supply with allowance of 30% from maximum load of LED Driver and installed No more than 25m from driver to last fittings in 1 continuous run to avoid any voltage drop. Complimentary LED Globes supplied in Garden Lights have a 12 month replacement warranty.
Outdoor Bollard Lights Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Low Voltage models must also be used with correct 12v DC Power supply with allowance of 30% from maximum load of LED Driver and installed No more than 25m from driver to last fittings in 1 continuous run to avoid any voltage drop. Complimentary LED Globes supplied in Garden Lights have a 12 month replacement warranty. Inground Lights Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Must also be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. Must have adequate drainage as outlined in installation instructions. Cannot exceed maximum run of 25m from LED driver to last fitting. Complimentary LED Globes supplied in Inground Lights have a 12 month replacement warranty. Deck Lights Must be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. No more than 25m from driver to last fittings installed in 1 continuous run to avoid any voltage drop. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Complimentary LED Globes supplied in Deck Lights have a 12 month replacement warranty. LED Flood Lights Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Must be used with supplied cables. No alterations are permitted including extension of leads from power to driver, otherwise warranty is void. Indoor Wall Lighting Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply. Complimentary LED Globes supplied in Deck Lights have a 12 month replacement warranty. LED Globes Low Voltage models must be used with correct 12v DC or 24v DC Power supply with allowance of 30% from maximum load of LED Driver. No more than 25m from driver to last fittings installed in 1 continuous run to avoid any voltage drop. Can only be used at a maximum of 8 hours continuous with a rest period of 1 hour before being switched back on with a maximum usage of no more than 12hrs per day for 3 Years warranty to apply. Otherwise the following warranties will apply: • 8-12hrs of continuous usage, 18 months warranty will apply. • 12-24hrs of continuous usage, 12 months warranty will apply.
www.havit.com.au
428
2022 • Lighting By Havit Recommended Routine Maintenance For Stainless Steel Luminaires
Stainless Steel features as the main exterior metal of many luminaires. Many of us recognise that stainless steel is intrinsically attractive, but these fittings require maintenance like all others. Stainless steel enjoys a strong and enduring reputation for long term appearance and structural integrity. But like all materials stainless steel may become stained or discoloured over time, impairing the overall look. This brown discolouration is referred to as “tea staining”. Tea staining can be defined as discolouration of the surface to stainless steel that does not affect the structural integrity or the longevity of the material.
Environmental Factors
Tea staining occurs most commonly within about five kilometres of the sea and becomes progressively worse closer to the marine source. However, wind exposure, pollution levels and higher temperatures can create environments where tea staining might occur 20 kilometres or more from the nearest body of seawater. Swimming pool surrounds must also be treated in the same manner, particularly indoor pools. These same factors also increase corrosion rates of alternative materials.
Surface Finish
Rough surface finishes promote tea staining; the smoother the surface, the better. Smoother surface finishes stay cleaner between washes and don’t have deep surface grooves where chlorides (salts) and other contaminants can collect and cause staining. Even smooth stainless steel finishes in coastal environments may show tea staining if not washed regularly.
Selecting Stainless Steel Luminaires
Care in the selection of luminaires for any application will avoid problems and disappointment. Some considerations for selection include: Appropriate Grade Selection. Exposure of a particular grade of stainless steel to a more aggressive environment than it can resist will contribute to tea staining. Grade 316 should be selected as a minimum within five kilometres of the sea. The less expensive grades (such as 304 or 202) will probably become tea stained or even suffer more severe corrosion.
Prevention – Perform Regular Maintenance
Protecting Stainless Steel from corrosion no longer needs to be a chore as there is now a unique treatment containing Nanolon which provides protection for months on end. The Stainless Steel solution is a two part rejuvenation and protection treatment providing long lasting protection to all grades of Stainless Steel. Ideal for the removal and protection of corrosion and ‘tea staining’ on all grades of internal and external stainless steel.
STEP 1
Using Stainless Steel Rejuvenating Paste - the non abrasive formula not only cleans, removes contaminates and rejuvenates the surface, it also pre conditions stainless steel for the protective treatment of (Step 2) Stainless Steel Sentry – the formulation is pH balanced in order to counter any acidic corrosive residues remaining from previous cleaning products and contaminates. The ph balancing aids in the protection of further ‘tea staining’ and corrosion.
STEP 2
Using Stainless Steel Sentry - for all grades of marine and architectural, internal and external stainless steel. Containing the ultra protection concentrate NANOLON. The NANOLON concentrate when applied to the preconditioned stainless steel microscopically coats it and protects it for several months depending on the conditions. The NANOLON concentrate protects stainless steel from atmospheric corrosion which causes unsightly ‘tea staining’ and rusting. This product is designed to be used only in conjunction with Stainless Steel Rejuvenating Paste. We recommend the use of this product on all Stainless Steel Luminaries displayed in this catalogue.
429
www.havit.com.au
Lighting by Havit
Architectural Copper Oxidation Why does copper turn green?
When used outdoors and exposed to the elements, copper transforms from a bright, shiny new penny shade, to a burnished brown, and finally to a distinct green colour. It is this particular effect that attracts architects and designers to use copper. This green finish can most famously be seen on the Statue of Liberty and is seen across many cities on old and new buildings. This unique characteristic of copper is completely natural and is often referred to as the “patina” – which refers to the way copper changes colour and turns green as it ages. This natural process actually preserves the copper and protects it from the outside elements making it an excellent choice for exterior lighting. Over time copper will naturally change colours – transforming from a shiny brown colour to darker browns, then blues and finally greens after a period of time dependant on fittings location and exposure to the natural elements such as wind and rain. Copper develops this “patina” which protects and preserves the metal underneath.
Natural Oxidation
In the same way rust develops on iron, patina develops on copper when the copper sulphate on the surface interacts with oxygen in the environment. Importantly, unlike rust which corrodes iron, patina actually protects and preserves the copper underneath.
Copper Care
The patina process of copper is completely natural and one of the big draws for people who like its look. However, some people prefer the newer look of copper and this can be restored with the help of readily available cleaning products and a little “elbow grease.” Buffing is a big part of the cleaning process. There are also many commercial products as well as homemade remedies, including those made with vinegar and lemon juice. You should always start by washing the copper with warm water and gentle soap. Avoid using abrasive cleansers or cloths, as they may scratch the copper.
www.havit.com.au
430
2022 • Lighting By Havit Notes & Updates
431
www.havit.com.au
Lighting by Havit Notes & Updates
www.havit.com.au
432
2022 • Lighting By Havit Notes & Updates
433
www.havit.com.au
Lighting by Havit Notes & Updates
www.havit.com.au
434
Havit.com.au LIFESTYLE LIGHTING
2022