Burlington Design Intent Draft by Avia Design Group, Inc.

City of Burlington, Iowa Wayfinding Program Design Intent September 18, 2015 D R A F T

Not for Release

Lake Wellington Professional Centre Studio Suite 110-Y1 12230 Forest Hill Blvd. Wellington, FL 33414 561.282.6205 axiacreative.com

CONTENTS

Overview

1.2

Family of Sign Types

2.1

Colors & Finishes

3.1

Structural Drawings

4.1

Graphics

5.1

Placement Guidelines

6.1

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

1.1

OVERVIEW

This document represents Axia Creative’s design intent

and is required to provide Axia and/or an authorized

for the City of Burlington’s Wayfinding Program. It is

City of Burlington representative samples for approval.

a communication device for prospective bidders to

shall receive the maximum UV protection.

fasteners not meant to secure access panels or removable components shall be concealed. Exposed hardware shall

Shop drawings, specification details and material/finish

be tamper proof, resistant to corrosion, and finished to

understand the form and function of elements that

The Sign Contractor is responsible for all structural

samples shall be submitted to Axia and an authorized

match adjacent surfaces.

constitute the system.

engineering, wind load and foundation compliance. All

City of Burlington representative for approval prior to

All exposed painted sign surfaces shall receive UV

fasteners shall be 316 stainless steel or approved equal.

proceeding with fabrication.

overlaminate with Anti-Graffiti properties.

documents under separate cover which include the

The Sign Contractor shall be responsible for verification

All final sign messages and document specifications

Message Schedule and the Location Plan.

of all dimensions, engineering, wind load and

shall be proofread by an authorized City of Burlington

foundation compliances and the Sign Contractor shall

representative and legal requirements checked by their

From this Bid Document, qualified bidders shall

be responsible for field conditions relative to the project

legal counsel.

formulate and submit their bid to fabricate, deliver and

prior to material order and component fabrication. Axia

install all items required to fulfill the contracted scope of

and/or an authorized City of Burlington representative

Full size plot patterns of all message panels shall be

work as described in an RFP produced under separate

shall be notified, in writing, of any contrary conditions

provided to Axia and an authorized City of Burlington

cover.

or discrepancies in these documents that may pose

representative for approval prior to proceeding with

challenges for the successful fabrication and installation

graphic application.

This Design Intent document is one of three companion

All design concepts, production art, written content

of the intended program. Cutting templates and production-ready art will be

and aesthetic format contained in this document are the legal property of Axia Creative and the City of

Alternate materials, finishes and proposed structuring

available for download from the City of Burlington

Burlington, Iowa. The recipient acknowledges that this

may be considered as long as the design and

project website. Reproducible art will be formatted as

material is proprietary and agrees not to use or disclose

performance of the system are not compromised and

vectorized pdfs. Templates will be formatted as layered

this material, or to make copies or use parts thereof,

it can be demonstrated that they are of equal or better

Adobe (CS6) Illustrator files including fonts. Access

without the written consent of Axia Creative and/or the

value. All proposed alternates must be conveyed to

information to the project website shall be provided

City of Burlington.

Axia and the authorized City of Burlington representative

upon request.

in writing prior to fabrication commencement. Production artwork, graphics, design concepts and

This document shall be used by the Sign Contractor to prepare detailed shop drawings that demonstrate

Please note that visual accuracy of the colors and

formulas shall be used solely for the execution of the

qualified engineering and fabrication methodology for

finishes represented in this document may not be

project represented in this document. They may not

the successful implementation of the City of Burlington

consistent with actual manufacturer’s swatches and

be used in the course of future projects, resold or

Phase 1 Wayfinding Program.

samples due to limitations of color printing technology.

reconstituted without Axia’s written consent.

The Sign Contractor is required to appropriate actual The Sign Contractor is responsible for matching all

color swatches and material samples from the

All exposed welds shall be ground smooth, all seams shall

colors, finishes and materials specified in this document

approved manufacturer. All colors and graphic imagery

be filled and painted to match surrounding surface. All

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

1.2

2 | Family of Sign Types

FA M I LY O F S I G N T Y P E S

Snake Alley 1894

Downtown Snake Alley Capitol Theater

400 Ft

Riverside Park Big Muddies

.36 Mi

.39 Mi 946 Ft

.32 Mi

Downtown Snake Alley Capitol Theater

400 Ft

Riverside Park Big Muddies

.36 Mi

.39 Mi 946 Ft

.32 Mi

DIRECTORY

Facility Name

Donec placerat. Nullam nibh dolor,

blandit sed, fermentum id, imperdiet sit

amet, neque. Nam mollis ultrices justo.

Sed tempor. Sed vitae tellus. Etiam sem

arcu, eleifend sit amet, gravida eget,

porta at, wisi. Nam non lacus vitae ipsum

viverra pretium. Phasellus massa. Fusce

magna sem, gravida in, feugiat ac,

molestie eget, wisi. Fusce consectetuer

luctus ipsum. Vestibulum nunc.

fermentum neque mi egestas dolor.

Suspendisse dignissim adipiscing libero. Integer leo. Sed pharetra ligula a dui.

Quisque ipsum nibh, ullamcorper eget, pulvinar sed, posuere vitae, nulla. Sed varius nibh ut lacus. Curabitur fringilla. Nunc est ipsum, pretium quis, dapibus sed, varius non, lectus. Proin a quam. Praesent lacinia, eros quis aliquam porttitor, urna lacus volutpat urna, ut

ID1

ID2

Set 1

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

2.1

June 15, 2015

FA M I LY O F S I G N T Y P E S

Dankwardt Memorial Park

Dankwardt Memorial Park • Non lacus vitae ipsum viverra pretium. • Phasellus massa. • Fusce magna sem, gravida in • Neugiat ac, molestie eget, wisi.

Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Etiam sem

• Fusce consectetuer • luctus ipsum. Vestibulum nunc. Suspendisse dignissim • Adipiscing libero. Integer leo. Sed • Quisque ipsum nibh, ullamcorper eget, pulvinar sed

•

Arcu, eleifend sit amet, gravida eget, porta at, wisi.

•

Non lacus vitae ipsum viverra pretium. Phasellus massa.

•

ID5

Dankwardt Memorial Park

Perkins Park

ID3

ID4

Casino

Neugiat ac, molestie eget, wisi. Fusce consectetuer luctus ipsum. Vestibulum nunc. Suspendisse dignissim.

•

Adipiscing libero. Integer leo. Sed pharetra ligula a dui.

•

Quisque ipsum nibh, ullamcorper eget, pulvinar sed

Posuere vitae, nulla. Sed varius nibh ut lacus. Curabitur fringilla. Nunc est ipsum, pretium quis, dapibus sed, varius non, lectus. Proin a quam. Praesent lacinia, eros quis aliquam porttitor, urna lacus volutpat urna, ut fermentum neque mi egestas dolor.

Rec Plex Downtown Welcome Center Snake Alley

Fusce magna sem, gravida in

•

ID2

Welcome Center Auditorium

Rec Plex Hospital Mall

To Roosevelt Ave 1.4 mi

Snake Alley Capitol Theater Amtrak

Set 2

Welcome Center Auditorium Parking

Snake Alley Vehicle Entrance

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

2.2

June 15, 201

3 | Colors & Finishes

COLORS Code

Name

Swatch

CMYK

Description / Comments

Manufacturer

PA N T O N E PMS 1955

Old Brick

C=29, M=100, Y=70, K=26

Primarily used for gateway signage and logo

Pantone Matching Systems

PMS 7421

Eggplant

C=38, M=94, Y=63, K=45

Primarily used for system signage

Pantone Matching Systems

PMS 349

Green

C=90, M=33, Y=100, K=26

Primarily used for park signage

Pantone Matching Systems

PMS 3435

Dark Green

C=86, M=45, Y=79, K=49

Primarily used for park signage

Pantone Matching Systems

PMS Black

Black

C=0, M=0, Y=0, K=100

Primarily used for post, poles and exposed hardware

Pantone Matching Systems

PMS 180

New Brick

C=16, M=91, Y=89, K=6

Primarily used for gateway signage and logo

Pantone Matching Systems

PMS 186

Red

C=12, M=100, Y=92, K=3

Primarily used for system signage

Pantone Matching Systems

PMS 729

Winter Wheat

C=25, M=50, Y=76, K=6

Primarily used for gateway signage, kiosk and logo

Pantone Matching Systems

PMS 726

Sand

C=17, M=24, Y=39, K=0

Primarily used for kiosk, park signage and signatures

Pantone Matching Systems

Colors used to represent the Greater Burlington brand and wayfinding system are represented by the Pantone Matching System. Unless otherwise specified, all finish colors shall be formulated to match the color specifications in this schedule.

Colors & Finishes

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

3.1

FINISHES Code

Name

Swatch

Specification

Description / Comments

Manufacturer

Match PMS 1955

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

3M 9800 series custom blended color ink

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

3M 9800 series custom blended color ink

PA I N T & I N K P1

Old Brick

P2 P3

Eggplant

Match PMS 7421

P4 P5

Green

Match PMS 349

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

Dark Green

Match PMS 3435

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

Black

Match PMS Black

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

New Brick

Match PMS 180

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

Red

Match PMS 186

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

3M 9800 series custom blended color ink

P10 P11

Winter Wheat

Match PMS 729

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

P12

Sand

Match PMS 726

Matthews Polyurethane Clear Coat Satin Paint

PPG/Matthews Paint

3M 9800 series custom blended color ink

P13

Colors & Finishes

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

3.2

FINISHES Code

Name

Swatch

Specification

Description / Comments

Manufacturer

S TA I N S1

Black Wood Stain

XXX

Concrete Stain

XXX

S U R FA C E T R E AT M E N T T1

Gateway Background

Stucco

2 color stucco finish with a light lace texture. Slight “old world” modeling with a hint of a subtle deeper Various under tone. Use PMS 729 as the undercoat and PMS 726 as the overcoat for reference.

Black

Powder-coat

Electrostatic coating by manufacturer.

Hooks and Lattice

Retroreflective White Vinyl

White 3M 3930

High Intensity Prismatic Reflective Vinyl

White Vinyl

White - A9001-O

High Performance Opaque Vinyl

Avery Graphics

VINYL

Colors & Finishes

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

3.3

4 | Structural Drawings

S PE C I FI CAT I O N S 1. Graphics. 1/4” thick aluminum sheet. Water jet or router-cut from electronic art provided by designer. Mounted to background panel with all-thread rod and second surface (welded) nut. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 2. Background panel. Fabricated “pan” aluminum (or approved equal). All exposed surfaces covered with stucco finish. Mechanically fastened to base panel. 3. Base panel. Fabricated “box” aluminum. All exposed surfaces painted with satin finish. All seams and welds ground, filled and finished smooth. 4. Large aluminum “L” brackets, mechanically fasted to base panel frame and bolted into internal structure of brick masonry. 3

5. Brick support structures. Match brick to typical downtown architecture. Fabricator shall provide material samples for review and approval.

11'-0"

6. Pre-cast coping. Match color to PMS 726.

1 /2 " 1"

10'-4"

7. 3000 PSI concrete base. Fabricator to engineer.

1 /2 "

2'-1"

1 5"

4'-5"

3'-9"

4'-5"

1'-5"

2 4.1

4'-6"

1 4.4

P7 3 1/ 4 "

4'-5"

1'-11"

6'-0"

Front View Scale: 1/2”=1’-0”

Structural Drawings | Primary Gateway | G1 | Elevations

Side View Scale: 1/2”=1’-0”

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.1

5. 4”Ø round steel poles, secured to sloping grade with 3000 PSI concrete footings. Fabricator to engineer. 6. Post dome cap.

11'-0"

7. Existing sloping grade.

1 /2 " 1"

10'-4"

1 /2 "

1 4'-5"

3'-9"

4'-5"

2 4.2 5'-0"

2 4.4

4 1'-5"

3 1/ 4 "

8'-8"

Front View Scale: 1/2”=1’-0”

Structural Drawings | Primary Gateway | G2 | Elevations

Side View Scale: 1/2”=1’-0”

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.2

11'-0"

6. Existing rock face.

1 /2 " 1"

10'-4"

1 /2 "

4'-5"

3'-9"

4'-5"

2 4.3

3 4.4 4

3 1/4" 2"

6 7'-0"

Front View Scale: 1/2”=1’-0”

Structural Drawings | Primary Gateway | G3 | Elevations

Side View Scale: 1/2”=1’-0”

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.3

4'-8"

2. Background panel. Fabricated “pan” aluminum (or approved equal). All exposed surfaces covered with stucco finish. Mechanically fastened to base panel.

4'-6"

3. 1/2” thick Sintra (expanded PVC) spacer. 10 15

4. Base panel. Fabricated “box” aluminum. All exposed surfaces painted with satin finish. All seams and welds ground, filled and finished smooth.

11 8

6. Aluminum extruded frame.

5. All-thread rod and second surface (welded) nut. Threaded and glued to aluminum logo.

2'-3"

2'-1"

1'-11"

7. CMU block.

8. Red brick. Match to typical downtown architecture. Fabricator shall provide material samples for review and approval. 1/ 2 " 1/ 2 "

9. Pre-cast coping.

10. 3000 PSI concrete base. Fabricator to engineer.

11. 6” stainless steel bolt, nut and washers (flat and lock). Anchoring L brackets to brick support structure.

12. Rebar embedded into concrete foundation

Section Detail - Type G1 Scale: 3/4”=1’-0”

13. Large aluminum “L” brackets, mechanically fasted with stainless steel bolts, nuts and lock washers.

15. Back fill concrete into CMU cavities.

16. Weld

14. 2” stainless steel bolt, nut and washers (flat and lock). Anchoring L brackets to base panel.

17. 4”Ø round steel poles, secured to sloping grade with 3000 PSI concrete footings. Fabricator to engineer.

Section Detail - Type G2 Scale: 3/4”=1’-0”

1/ 2 " 1/ 2 "

18. 2” x 2” square steel tube frame bolted into rock face. 19. Existing rock face.

Section Detail - Type G3 Scale: 3/4”=1’-0”

Structural Drawings | Primary Gateways | G1, G2, G3 | Details

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.4

S PE C I FI CAT I O N S 1. Downtown signature. 1/4” thick aluminum sheet. Water jet or router-cut from electronic art provided by designer. Mounted to background panel with all-thread rod and second surface (welded) nut. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 1"

4'-2"

2. Background panel. 1/4” thick aluminum sheet. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

4 1/ 2"

3. Base panel. Fabricated “box” aluminum. All exposed surfaces painted with satin finish. All seams and welds ground, filled and finished smooth.

1'-8" 1'-2"

2'-0"

P7 1'-3"

2'-2"

P7 2 4.5

4. Powder-coated steel planter bracket with back plate. Mechanically fastened to square pole sleeve. http://www.hooksandlattice.com/large-hanging-basketbrackets.html 5. Hanging basket. Provided by city (TBD). 6. 4” O.D. extruded aluminum pole (smooth). (The SignStore: ussigncrafters.com). All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 7. Pole base. 300 Series. (The SignStore: ussigncrafters.com). All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 8. All-thread rod with PVC or aluminum sleeves. Painted with Matthews Polyurethane Clear Coat Satin. 9. Square pole sleeve. 1/4” thick aluminum extrusion. Mechanically (countersunk) to pole. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

10. 3000 PSI concrete base. Fabricator to engineer.

8'-4"

1'-6"

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Rear View Scale: 1/2”=1’-0”

Structural Drawings | Downtown Gateway | G4 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.5

S PE C I FI CAT I O N S 1. Background panel. 1/4” thick aluminum sheet. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 2. 4” O.D. extruded aluminum pole (smooth). (The SignStore: ussigncrafters. com) 3. Ornamental cast aluminum ball cap. Style 4B. (The SignStore: ussigncrafters. com) 4. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post.

3'-2"

3 1 5"

2'-6"

Snake Alley

1894

5. Pole base. 300 Series. (The SignStore: ussigncrafters.com). All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 6. Maintain 7’-0” from grade to bottom of vehicular guide signs. In regions where snow plows require exceptional clearance, verify compliance requirements with the governing transportation authority. 7. 3000 PSI concrete base. Fabricator to engineer.

1894

2 4.6

10'-0"

7'-0"

1'-6"

Face A View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Face B View Scale: 1/2”=1’-0”

Structural Drawings | Snake Alley Identity | ID1 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.6

S PE C I FI CAT I O N S 1. Background panel (front). 1/4” thick aluminum sheet. All exposed surfaces finished smooth. Face covered with reflective vinyl. 3M custom inks screenprinted directly onto vinyl with UV gloss overlaminate. 2. Background panel (back). 1/4” thick aluminum sheet. All exposed surfaces finished smooth. Back face and edges painted with Matthews Polyurethane Clear Coat Satin. 3. Ornamental cast aluminum ball cap. Style 4B. (The SignStore: ussigncrafters. com)

2'-3"

4. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post. Painted with Matthews Polyurethane Clear Coat Satin. 5. Custom break-formed aluminum z-angle bar bracket to accommodate additional 1/4” depth. Fill weld to back of sign panel and thru bolt to sign post. Painted with Matthews Polyurethane Clear Coat Satin.

1'-0"

1 2 4.7

10'-5"

6. Maintain 7’-0” from grade to bottom of vehicular guide signs. In regions where snow plows require exceptional clearance, verify compliance requirements with the governing transportation authority. 7. 3” O.D. extruded aluminum pole (smooth). (The SignStore: ussigncrafters.com) 8. 3000 PSI concrete base. Fabricator to engineer.

7'-9"

7'-0"

1'-6"

Face A View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Face B View Scale: 1/2”=1’-0”

Structural Drawings | Parking Area Identity | ID2 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.7

S PE C I FI CAT I O N S 1. Background panel. 1/4” thick aluminum sheet. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 2. Attached panel to brick wall with flat-head screws and anchors. Counter-sink screws into sign face and paint to match.

1'-6"

2 4.8

Face A View Scale: 1 1/2”=1’-0”

Side View Scale: 1 1/2”=1’-0”

Mock-up Scale: NS

Structural Drawings | Information Identity | ID5 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.8

S PE C I FI CAT I O N S 1. Downtown signature. 1/4” thick aluminum sheet. Water jet or router-cut from electronic art provided by designer. Mechanically fastened to background panel. 2. OPD1CL Clear Single Pocket Outdoor Brochure Holder or approved equal. Source: http://www.displays2go.com 3. iZone’s 0.090” digital graphic surface papers encapsulated with melamine resin. Edges to be finished smooth and painted to match Sintra (expanded PVC) profile. Threaded hardware inserted directly into the rear of the material for installation. Follow manufacture’s specifications. 2'-0"

4 1/ 2"

1'-6"

1 4.10

4. Background panel. 1/8” thick aluminum laminated to 1/2” thick Sintra (expanded pvc) . All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

5. 3” x 2” square aluminum extruded frame. All exposed surfaces painted with satin finish. All seams and welds ground, filled and finished smooth.

6" 4"

6. 3000 PSI concrete base. Fabricator to engineer.

3'-6 1/2"

2 4.9

7'-2"

2 9" 3 1/2"

1'-3" 1"

Face A View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Face B View Scale: 1/2”=1’-0”

Structural Drawings | Kiosk | K1 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.9

S PE C I FI CAT I O N S

4 1/ 2 "

1. 1/4” thick aluminum sheet. Water jet or router-cut from electronic art provided by designer. Mechanically fastened to background panel. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

1 / 4" 1 / 2"

2. 1/8” thick aluminum laminated to 1/2” thick Sintra (expanded PVC). All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

3. 1/2” thick Sintra (expanded PVC). All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

1'-1"

4. Extruded aluminum frame. Welded. 5. iZone’s 0.090” digital graphic surface papers encapsulated with melamine resin. Edges to be finished smooth and painted to match Sintra (expanded PVC) profile. Threaded hardware inserted directly into the rear of the material for installation. Follow manufacture’s specifications.

4 5

6. OPD1CL Clear Single Pocket Outdoor Brochure Holder or approved equal. Source: http://www.displays2go.com

3 3'-6 1/2"

7. 3M™ VHB™ Tape 5925 Black. Position tape so it is hidden by stocked brochures. 8. Threaded rod (J-bolt) fastened to extruded aluminum frame and embedded into concrete base.

2 3

9. 3000 PSI concrete base. Fabricator to engineer. Chamfer edges 1/2” at 45º. 7'-7"

6 7 2'-5 1/2" 1'-10"

8 9 4" 2"

Section

Scale: 1 1/2”=1’-0”

Structural Drawings | Kiosk | K1 | Details

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.10

S PE C I FI CAT I O N S 1. Background panel (front). 1/4” thick aluminum sheet. Attach to square post with welded all thread rod and tamper-proof nuts. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 2. Background panel (back). 1/4” thick aluminum sheet. All exposed surfaces finished smooth. Back face and edges painted with Matthews Polyurethane Clear Coat Satin. 3. 2” x 2” square aluminum post. Top is welded closed with a flat cap. All exposed surfaces finished smooth. Back face and edges painted with Matthews Polyurethane Clear Coat Satin. 4. 3000 PSI concrete base. Fabricator to engineer.

1'-10"

Facility Name

1'-10"

Facility Name

3'-0"

Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Etiam sem Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus.

4'-6"

•

Arcu, eleifend sit amet, gravida eget,

•

Non lacus vitae ipsum viverra pret

luctus ipsum. Vestibulum nunc.

•

5 4.11

6'-0"

Neugiat ac, molestie eget, wisi.

•

Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Posuere vitae, nulla. Sed varius nibh ut lacus. Curabitur fringilla. Nunc est ipsum, pretium quis, dapibus sed, varius non, lectus. Proin a quam. Praesent lacinia, eros quis aliquam porttitor, urna lacus volutpat urna, ut fermentum neque mi egestas dolor

Fusce magna sem, gravida in

•

2 4.11

Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Etiam sem

6'-0"

Phasellus massa. •

Adipiscing libero. Integer leo. Sed Quisque ipsum nibh, ullamcorper luctus ipsum. Vestibulum nunc.

3'-0"

1'-0"

Front View - Type R1 Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

1'-0"

Rear View Scale: 1/2”=1’-0”

Front View - Type R2 Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Structural Drawings | Facility Regulatory | R1, R2 | Elevations

Rear View Scale: 1/2”=1’-0”

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.11

S PE C I FI CAT I O N S 1. Background panel. 1/4” thick aluminum sheet. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. Anchored into CRL Satin Anodized 1/4” aluminum U-channel with tamper-proof fasteners. 2. CRL Satin Anodized 1/4” aluminum U-channel with 1-5/16” High Wall. Welded to 3” O.D. extruded aluminum pole. All exposed surfaces painted with Matthews Polyurethane Clear Coat Satin. All seams and welds ground, filled and finished smooth. 3. Post dome cap. Painted with Matthews Polyurethane Clear Coat Satin. 3

2'-2"

Downtown Snake Alley Capitol Theater

400 Ft

Riverside Park Big Muddies

.36 Mi

.39 Mi 946 Ft

.32 Mi

Downtown Snake Alley Capitol Theater

400 Ft

Riverside Park Big Muddies

.36 Mi

4. 3” O.D. extruded aluminum pole (smooth). All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

2'-2"

.39 Mi 946 Ft

2'-0"

2 4.13

.32 Mi

Downtown Snake Alley Capitol Theater

400 Ft

Riverside Park Big Muddies

.36 Mi

5. Band strap. Threaded through machined slot in 1/4” Thick aluminum U-channel.

.39 Mi 946 Ft

.32 Mi

1 4.13

2 4.12 9'-0"

7'-0"

1'-0"

Face A View - Type P1 Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Face B View - Type P2 Scale: 1/2”=1’-0”

Structural Details | Pedestrian Guides | P1, P2 | Elevations

Face A View Scale: 1/2”=1’-0” 1

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.12

2. CRL Satin Anodized 1/4” aluminum U-channel with 1-5/16” High Wall. Welded to 3” O.D. extruded aluminum pole. All exposed surfaces painted with Matthews Polyurethane Clear Coat Satin. All seams and welds ground, filled and finished smooth.

3. 3” O.D. extruded aluminum pole (smooth). All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

1 3 4.13

4. Band strap. Threaded through machined slot in 1/4” Thick aluminum U-channel.

6 8 2

5. Machined slot to receive band strap. 6. Hole through first side of U-channel aligned with hole through background panel. Hole through second side of U-channel is threaded to secure background panel with stainless steel machine screw. 7. Stainless steel machine screw

8. Existing pole structure (diameter may vary. Fabricator shall confirm dimension in field prior to installation.

Detail - Type P2

Scale: 1 1/2”=1’-0”

Section - Type P2 Scale: 1 1/2”=1’-0”

Section - Type P1 Scale: 1 1/2”=1’-0”

Structural Details | Pedestrian Guides | P1, P2 | Sections and Detail

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.13

S PE C I FI CAT I O N S 1. Background panel. 1/2”thick Colorcore®. Edges filled and finished smooth. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. http://www.leaguemfg.com/colorcore-signage.php 2. 1/8” thick aluminum sheet. Mechanically fastened and glued. All seems and gaps filled with clear slicone to protect against moisture. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 3. 6” x 6” (5.5” x 5.5”) clear-heart wood posts anchored into grade with concrete footings. Treated and stained. 4. 2’ x 4” wood (stud) or aluminum internal frame. Bolted to wood posts. 2

5. 3000 PSI concrete base. Fabricator to engineer.

5 1/ 2"

Plan View Scale: 1/2”=1’-0”

1 4.14

3 4.14

2'-6" 4'-0"

Dankwardt Memorial Park

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Thank you for visiting Dankwardt Memorial Park

4 4.14

1'-6"

7'-7"

Rear View Scale: 1/2”=1’-0”

Structural Details | Large Park Identity | ID3 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.14

5. 3000 PSI concrete base. Fabricator to engineer. 5 1/ 2"

5 1/ 2"

3 4.15

Plan View Scale: 1/2”=1’-0”

4'-11"

1 4.15

2'-6" 4'-0"

Perkins Park

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Thank you for visiting Perkins Park

4 4.15

1'-6"

Rear View Scale: 1/2”=1’-0”

Structural Details | Small Park Identity | ID4 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.15

S PE C I FI CAT I O N S 1. Background panel (front). 1/2”thick Colorcore®. Edges filled and finished smooth. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. http://www.leaguemfg.com/colorcore-signage. php 2. Background panel (back). 1/2”thick Colorcore®. All rear-exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. 4

3. 1/8” thick aluminum sheet. Mechanically fastened and glued. All seems and gaps filled with clear silicone to protect against moisture. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

4. 4” x 4” (3.5” x 3.5”) clear-heart wood posts anchored into grade with concrete footings. Treated and stained.

Plan View

5. 2’ x 4” wood (stud) or aluminum internal frame. Bolted to wood posts. All rearexposed surfaces (and hardware) finished smooth and painted with Matthews Polyurethane Clear Coat Satin.

Scale: 1/2”=1’-0” 3 4.16

3'-0"

1 4.16

3 1/ 2"

6. Background panel. 1/4” thick aluminum sheet. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. Mounted to wood post with hidden fasteners. 3 1/ 2 "

1'-2"

7. 3000 PSI concrete base. Fabricator to engineer.

Dankwardt Memorial Park

• Non lacus vitae ipsum viverra pretium. • Phasellus massa.

2'-0"

Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Etiam sem

• Fusce magna sem, gravida in • Neugiat ac, molestie eget, wisi. • Fusce consectetuer • luctus ipsum. Vestibulum nunc. Suspendisse dignissim • Adipiscing libero. Integer leo. Sed • Quisque ipsum nibh, ullamcorper eget, pulvinar sed

•

4'-0"

•

Arcu, eleifend sit amet, gravida eget, porta at, wisi.

Tuctus ipsum. Vestibulum nunc uspendisse dignissim dipiscing libero. Integer leo. Sed Vestibulum nunc uspendisse dignissim dipiscing.

Non lacus vitae ipsum viverra pretium. Phasellus massa.

•

Fusce magna sem, gravida in

•

Neugiat ac, molestie eget, wisi. Fusce consectetuer

•

luctus ipsum. Vestibulum nunc. Suspendisse dignissim.

• •

Adipiscing libero. Integer leo. Sed pharetra ligula a dui.

6'-0"

6 4.16

6'-0"

4 4.16

Quisque ipsum nibh, ullamcorper eget, pulvinar sed luctus ipsum. Vestibulum nunc. Suspendisse dignissim.

4'-0"

2'-0"

1'-0"

Front View - Type R3 Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

1'-0"

Rear View Scale: 1/2”=1’-0”

Front View - Type R4 Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Structural Drawings | Park Regulatory | R3, R4 | Elevations

Rear View Scale: 1/2”=1’-0” 1

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.16

S PE C I FI CAT I O N S 1. 1/4”thick aluminum panel. 2. Tight seam at optimum location to preserve visual balance and use of material 3. Aluminum rain cap 6'-0"

5'-0"

4. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post. 5. Aluminum z-clip and flatbar

6. Tamper-proof thru-bolts, lock washers and nuts. 7. 5.56”Ø painted steel post. Fabricator to engineer wall thickness.

Varies

Rec Plex

1 1

Downtown

8. Maintain 7’-0” from grade to bottom of vehicular guide signs. In regions where snow plows require exceptional clearance, verify compliance requirements with the governing transportation authority. 9. 3000 PSI concrete base. Fabricator to engineer.

2 2"

7'-9"

Welcome Center

2 4.17

Varies

14'-0"

Snake Alley Casino

7'-0"

1 4.23

Rear View

Scale: 1/2”=1’-0”

3'-0"

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Structural Drawings | Vehicular Guides | V1 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.17

S PE C I FI CAT I O N S 1. 1/4”thick aluminum panel. 2. Tight seam at optimum location to preserve visual balance and use of material 3. Aluminum rain cap 3"

6'-0"

5'-0"

4. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post. 3

5. Aluminum z-clip and flatbar 6. Tamper-proof thru-bolts, lock washers and nuts.

2'-0"

1 2

Rec Plex

5'-4" 3'-4"

Hospital

7. 5.56”Ø painted steel post. Fabricator to engineer wall thickness. 8. Maintain 7’-0” from grade to bottom of vehicular guide signs. In regions where snow plows require exceptional clearance, verify compliance requirements with the governing transportation authority. 9. 3000 PSI concrete base. Fabricator to engineer.

2 4.18

Mall

11'-6"

7'-0"

1 4.23

3'-0"

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Rear View Scale: 1/2”=1’-0”

Structural Drawings | Vehicular Guides | V2 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.18

S PE C I FI CAT I O N S 1. 1/4”thick aluminum panel. 2. Aluminum rain cap 3. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post. 4. Tamper-proof thru-bolts, lock washers and nuts. 5. 5.56”Ø painted steel post. Fabricator to engineer wall thickness.

5'-0"

6'-0"

7. 3000 PSI concrete base. Fabricator to engineer.

To Roosevelt Ave 1.4 mi

3'-5"

2 4.19

9'-6"

6 5

7'-0"

1 4.23

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Rear View Scale: 1/2”=1’-0”

Structural Drawings | Vehicular Guides | V3 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.19

S PE C I FI CAT I O N S 1. 1/4”thick aluminum panel.

4'-9"

4'-0"

2. Tight seam at optimum location to preserve visual balance and use of material 3

3. Aluminum rain cap 4. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post.

Varies

5. Aluminum z-clip and flatbar

Welcome Center

6. Tamper-proof thru-bolts, lock washers and nuts.

Auditorium

2 2"

6'-9"

Snake Alley

Varies

Capitol Theater

2 4.20 13'-0"

Amtrak

7'-0"

1 4.23

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Rear View Scale: 1/2”=1’-0”

Structural Details | Vehicular Guides | V4 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.20

S PE C I FI CAT I O N S 1. 1/4”thick aluminum panel. 2. Tight seam at optimum location to preserve visual balance and use of material 3. Aluminum rain cap 4. Aluminum z-angle bar brackets fill weld to back of sign panel and thru bolt to sign post.

4'-9"

4'-0"

5. Aluminum z-clip and flatbar 3

6. Tamper-proof thru-bolts, lock washers and nuts. 7. 5.56”Ø painted steel post. Fabricator to engineer wall thickness.

1 7"

4'-9"

Welcome Center 2'-8"

Auditorium

9. 3000 PSI concrete base. Fabricator to engineer.

2 4.21

Parking

13'-0"

7'-0"

1 4.23

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Rear View Scale: 1/2”=1’-0”

Structural Details | Vehicular Guides | V5 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.21

4'-0"

3'-3"

Snake Alley Vehicle Entrance

2 4.22

5. 5.56”Ø painted steel post. Fabricator to engineer wall thickness. P7

7. 3000 PSI concrete base. Fabricator to engineer.

9'-6"

6 7'-0"

1 4.23

Front View Scale: 1/2”=1’-0”

Side View Scale: 1/2”=1’-0”

Rear View Scale: 1/2”=1’-0”

Structural Details | Vehicular Guides | V6 | Elevations

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.22

S PE C I FI CAT I O N S 1. 5.56”Ø painted steel post.. 2. Aluminum clam shell cover. For V4, V5 and V6 only. 3. 3000 psi concrete foundation cylinder. 4. Welded flange and mounting plate. 5. FHWA-approved Transpo PoleSafe® breakaway supports to be attached to J-bolts below and base flange above (or approved equal). Coupling to be engineered and installed according to manufacturer’s specifications.

6. Galvanized “J” anchor bolts. 5.56” O.D.

7. Grade

9 1/4"

2 1/8"

Detail Scale: 3”=1’-0”

Structural Drawings | Vehicular Guides | V1, V2, V3, V4, V5, V6 | Details

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.23

5 | Graphics

S PE C I FI CAT I O N S 1. Clearview Hwy 2B is used on all vehicular and pedestrian guide signs. Letter kerning shall be set to 0 in all cases.

Auditorium

2. Adobe Devanagari is used for place identification signs 3. Angie Sans Standard Demi is used to emphasize a title or leading caption on information and regulatory signs.

AaBbCcDdEeFfGgHhIiJjKkLlMmNn 1234567890 1

4. Angie Sans Standard Regular is used for descriptive or narrative text on information and regulatory signs. NOTE: All typography shall be set exactly as specified in these drawings. The fabricator shall submit full alphabet print outs of fonts generated from their production software to assure that their version matches that which is specified.

Font - Clearview Hwy 2B Scale: NS

Perkins Park

AaBbCcDdEeFfGgHhIiJjKkLlMmNn 1234567890 2

Font - Adobe Devanagari Bold Scale: NS

DIRECTORY AaBbCcDdEeFfGgHhIiJjKkLlMmNn 1234567890 3

Font - Angie Sans Standard Demi Scale: NS

Please Use Trash Recepticals AaBbCcDdEeFfGgHhIiJjKkLlMmNn 1234567890 4

Font - Angie Sans Standard Regular Scale: NS

Graphics | Fonts

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.25

S PE C I FI CAT I O N S Symbols are use on signage to convey information quickly and efficiently. Production artwork files are available as vectorized pdfs which are scalable vector formats. They can be viewed by any pdf reader or opened in most industry standard design and publishing software.

Restrooms

Leash-Free Dog Area

Archery

Playground

Swimming

Picnic Area

Bike Ramps

All artwork available for download from the City of Burlington project website. Access credentials shall be provided by a city representative or an authorized Axia officer upon request. Reconstructed art or digitized versions from printed copies shall not be used. Only original electronic files generated by Axia may be used for application onto signage.

Volleyball

Boat Launch

Basketball

Baseball

Disc Golf

Scale: NS

Left Turn

Straight Ahead

Right Turn

Right Diagonal Turn

Graphic Detail - Arrows Scale: NS

Public Parking

Skate Area

Graphic Detail - Service Symbols

Left Diagonal Turn

Tennis

Visitor Information

Library

Airport

Graphic Detail - Facility/Function Symbols

Scale: NS

Graphics | Arrows & Symbols

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

4.26

S PE C I FI CAT I O N S 1. Aluminum logo components painted with Matthews exterior polyurethane.

Equal

P11

Equal

7 1 / 2" 1'-7"

Graphic Detail Scale: 3/4”=1’-0”

Graphics | G1, G2, G3

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.1

S PE C I FI CAT I O N S 1. Screen-printed directly onto aluminum/vinyl composite with 3M custom inks with UV/graffiti vinyl over-laminate. Edges finished smooth and painted to match adjoining face color. Graphics centered on panel. 1 P4

P13

2. Graphics are defined by the absence of the screen-printed background. The vinyl substrate is exposed. Edges finished smooth and painted to match adjoining face color. Graphics centered on panel.

P13 6 1/ 2 "

3 3/ 4"

1'-2"

7 1/ 2"

1 P13

6 1/ 2"

Graphic Detail - Type G4

Scale: 3/4”=1’-0”

P10

Graphic Detail - Type ID2 Scale: 3/4”=1’-0”

3 1/ 2"

11" 3 1/ 2" 2 1/ 2"

1894

1 11"

Snake Alley

1 P13 P2

P13 P2 P4

Graphic Detail - Type ID1 Scale: 3/4”=1’-0”

Graphic Detail - Type ID5 Scale: 3/4”=1’-0”

Graphics | G4, ID1, ID2, ID5

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.2

S PE C I FI CAT I O N S 1. Burlington signature. Screen printed. Graphics centered on panel. 2. Identity. Screen printed or frisketed. Graphics centered on panel. 3. Signature band. Painted with Matthews exterior polyurethane. 1

4. Panel background. Painted with Matthews exterior polyurethane.

2 3 / 4"

5. Thank you message. Screen printed or frisketed. Graphics centered on panel.

8 3 / 8"

6. Service Symbol background. Screen printed or frisketed.

3 3 / 4" 5 " 4 3 / 4"

Dankwardt Memorial Park

P12

7. Service Symbol. Screen printed or frisketed.

1/ 2"

Graphic Detail - Front Scale: 3/4”=1’-0”

11" 3"

Thank you for visiting Dankwardt Memorial Park

Graphic Detail - Back Scale: 3/4”=1’-0”

Graphics | ID3

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.3

1. Burlington signature. Screen printed. Graphics centered on panel. 2. Identity. Screen printed or frisketed. Graphics centered on panel. 3. Signature band. Painted with Matthews exterior polyurethane. 1

4. Panel background. Painted with Matthews exterior polyurethane.

2 3 / 4"

5. Thank you message. Screen printed or frisketed. Graphics centered on panel.

8 3 / 8"

6. Service Symbol background. Screen printed or frisketed.

3 3 / 4" 5"

Perkins Park

4 3 / 4"

P12

7. Service Symbol. Screen printed or frisketed.

1/ 2"

Graphic Detail - Front Scale: 3/4”=1’-0”

11" 3"

Thank you for visiting Perkins Park

Graphic Detail - Back Scale: 3/4”=1’-0”

Graphics | ID4

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.4

S PE C I FI CAT I O N S ET

N 10 TH

N 9T H ST RE

FRA

IN S TRE

1 / 2 M i l e f ro m We l c o m e C e n t e r ET

N 7T H ST RE

NKL

ET ST RE

4. Signature band. Painted with Matthews exterior polyurethane. Edges finished smooth and painted to match adjoining face color.

ST RE

N 3R D

23 34

ST RE

5. Title band. Painted with Matthews exterior polyurethane. Edges finished smooth and painted to match adjoining face color.

ST RE

N 4T H

ST RE

N 5T H

ST RE

N 6T H

AR CH

N 10 TH

HI GH

ST RE

e f ro m We l c o m e C e n t e r 1/4 Mil

6. Message graphics. Applied exterior grade reflective vinyl. Graphics centered on panel.

N CE NTR

AL A VE

E AGENC Y STREET

NG ST RE

ST RE

N 9T H

SP RI

2. Downtown identity message. Applied exterior grade reflective vinyl. Graphics centered on panel. 3. Burlington signature. Screen printed. Graphics centered on panel.

ST RE

ARCH STREET

6" 1 1 / 4" 1 1/ 2" 1 1 / 4" 1 1/ 2" 1 1/ 4"

AV E

N 10 TH

1. Downtown identity arch. Painted with Matthews exterior polyurethane. Edges finished smooth and painted to match adjoining face color. Graphics centered on panel.

RA L N CE NT

NG ST RE

ST RE

COU WELLS

STREET

SP RI

OSBORN

P12

A ST RE

H ST RE

NO RT

IO W

N 8T H

ST RE

WELLS S TREE

A FF RO

P12

BL U

CO UR

CO LU

M BI

A ST RE

HI NG

TO N

ST RE

VA LL ET

ST RE NT

ST RE

S 5T H ST RE

ST RE

M AR

DIVIS ION

KE T

ST RE

S 3R D ST RE

Scale: 1 1/2”=1’-0”

S 4T H

S 6T H

ST RE

S 7T H ST RE

Graphic Detail - Header

17 ET

R I V E R

STRE ET

S CENTR AL AVE

T AETNA STREE

STR EET

18 T S MAIN STREE

ELM STREE T

SUM MER

S 9T H

EY ST RE

M I S S I S S I P P I

ST RE

N FR O

KE T

N ST RE

N ST RE ET

N M AI

ER SO

N 3R D ST RE

N 4T H

N 5T H

ST RE

N 6T H

ST RE

W AS

JE FF

M AR

7. Digitally reproduced image from original Designer-provided file applied to iZone’s 0.090” digital graphic surface papers encapsulated with melamine resin. Edges to be finished smooth and painted to match Sintra (expanded PVC) profile. Threaded hardware inserted directly into the rear of the material for installation. Follow manufacture’s specifications.

N 7T H ST RE

SN AK E AL LE Y ST RE

P1 N 8T H

T ST RE

20 26 7

T MAPL E STREE

32 16

VINE STREE T 61

AN GU

LA R

ST RE

You are here

Port of Burlington/Welcome Center

Amtrak/Depot

Flint Hills Golf Course

Crapo Park

Public Restrooms

Auditorium

SE Iowa Airport

Aspen Grove Cemetery

Spirit Hollow Golf

Information/Directory

Snake Alley - Pedestrian Landing

Flint River Trail

Farmers Market

Roosevelt Ave

Parking

Snake Alley - Vehicle Entrance

Westland Mall

Bracewell Stadium

Southeastern Community College

ATM

Mosquito Park

West Burlington Pool

Riverside Park

Great River Medical Center

Parks

Burlington Downtown

Burlington Trailways

Riverside Walk

To Be Determined

West Burlington

RecPlex

Great River Bridge

To Be Determined

Locomotive Display

Capitol Theater

Community Baseball Field

To Be Determined

Pzazz/Casino

Starr’s Cave

Dankward Memorial Park

To Be Determined

Graphic Detail - Map (North View) Scale: NS

Graphics | K1 | Header & Area Map

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.5

S PE C I FI CAT I O N S 1. Distance from left edge of sign panel to arrow. 2. Measurement of arrow’s width and height.

3. Distance from right edge of arrow panel to left edge of message.

2 1

1/ 4"

3" 1 1/2"

4. Minimum distance from left edge of message to right edge of sign panel. Messages shall not exceed this margin.

1/ 4"

5. Distance from bottom edge of signature band to top edge of message. 6. Distance from message baseline to top edge of dividing bar.

1 1 / 8" 3/ 4"

7. Distance from bottom edge of dividing bar to top edge of capital letter.

1 1/ 8"

1/ 4 "

Message Xxxxxxxxxx XXXX Mi Message Xxxxxxxxxx XXXX Mi 1 1/ 4"

Message Xxxxxxxxxx

8 6 7

Scale: 1 1/2”=1’-0” 1

P12

8. Distance between the baselines of multiple messages that share a common arrow.

9. Distance between the baselines of multiple lines of a single message.

Riverside Park Big Muddies

.36 Mi

11. Signature band. Painted with Matthews exterior polyurethane.

.32 Mi

12. Downtown signature. Screen printed. Graphics centered on panel.

.39 Mi 946 Ft

10. Minimum distance from bottom edge of panel to baseline of lowest message. Messages shall not exceed this margin.

13. Panel background. Painted with Matthews exterior polyurethane. 14. Dividing band. Painted with Matthews exterior polyurethane.

3 1/ 4 "

400 Ft

Message Formatting - Side A*

1/ 4"

Downtown Snake Alley Capitol Theater

XXXX Mi 2"

1 1/ 8 "

1 3 / 4 " 2 1 / 4"

1 1/ 8"

XXXX Ft Double Line Message Xxxxxxxxxx XXXX Mi Message Xxxxxxxxxx XXXX Mi

Graphic Detail - Type P1.3 Scale: 1 1/2”=1’-0”

15. Message graphics. Applied exterior grade opaque vinyl. 16. Message length is limited to 18 characters including spaces and the distance indicator message is limited to 7 characters including spaces as long as the combined message does not invade the 5” margin. * Message formatting applies to all P1 signs.

1/ 4"

Message Xxxxxxxxxx XXXX Mi

Message Formatting - Side B* Scale: 1 1/2”=1’-0”

Graphics | P1, P2

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.6

P12

2 3/ 8"

2 3/ 8 "

S PE C I FI CAT I O N S 1. Message graphics. Applied exterior grade opaque vinyl. Graphics centered on panel.

2 3/ 8 "

2. Greater Burlington signature. Screen printed. 1 1/ 4"

1 1/ 4"

3. Signature band. Painted with Matthews exterior polyurethane.

4. Panel background. Painted with Matthews exterior polyurethane. 5. Facility name or panel caption. Graphics centered on panel.

Adipiscing libero. Integer leo. Sed

•

Quisque ipsum nibh, ullamcorper luctus ipsum. Vestibulum nunc

•

Fusce magna sem, gravida in

•

Neugiat ac, molestie eget, wisi

Posuere vitae, nulla. Sed varius nibh ut lacus. Curabitur fringilla. Nunc est ipsum, pretium quis, dapibus sed, varius non, lectus. Proin a quam.

Non lacus vitae ipsum viverra pret Phasellus massa

9. Minimum distance from bottom edge of panel to baseline of lowest message. Messages shall not exceed this margin. 10. Minimum distance from left edge of message to right edge of sign panel. Messages shall not exceed this margin. 11. Minimum distance from right edge of message to right edge of sign panel. Messages shall not exceed this margin.

2 1/2" 1"

•

8. Secondary message or disclaimer. Flush left alignment.

2 1 / 2 " 2 1 / 4 " 1 1/ 8 "

luctus ipsum. Vestibulum nunc

Arcu, eleifend sit amet, gravida eget

7. Bulleted Items. Flush left alignment. 3 3/ 8" 1 3/ 8"

•

Neugiat ac, molestie eget, wisi 3"

•

1 /2 "

Fusce magna sem, gravida in

3 /4 "

•

1 1/ 4"

Non lacus vitae ipsum viverra pret Phasellus massa

2 1/2" 1"

1/2"

•

Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Etiam sem

2 1/ 2 " 2 1/ 4 " 1 1 / 8 "

Arcu, eleifend sit amet, gravida eget

Facility Name

2 1/ 2"

•

5 3 3/ 8" 1 3/ 8"

Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus.

6. Primary or introductory message. Flush left alignment.

Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Etiam sem

3 /4 "

Facility Name

1 1/ 4"

Graphic Detail - Type R2 Scale: 1 1/2”=1’-0”

Graphic Detail - Type R1 Scale: 1 1/2”=1’-0”

Graphics | R1, R2

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.7

S PE C I FI CAT I O N S

P12

1. Message graphics. Applied exterior grade opaque vinyl.

2. Identity. Screen printed. Graphics centered on panel.

3 3/ 4"

1/ 2 "

3. Identity band. Painted with Matthews exterior polyurethane.

11 1

1/ 2 "

4. Panel background. Painted with Matthews exterior polyurethane. 5. Burlington signature. Screen printed. Graphics centered on panel.

3/8"

Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus.

•

Neugiat ac, molestie eget, wisi

•

luctus ipsum. Vestibulum nunc

•

Adipiscing libero. Integer leo. Sed

•

Quisque ipsum nibh, ullamcorper Nullam nibh dolor, blandit sperdiet sit amet, nequlli lum nunc

•

Fusce magna sem, gravida inmollis ultrices justo

•

Neugiat ac, molestie eget, wisi

•

luctus ipsum. Vestibulum nunc

•

Adipiscing libero. Integer leo. Sed

8. Secondary message or disclaimer. Flush left alignment. 9. Minimum distance from top edge of Burlington Signature to baseline of lowest message. Messages shall not exceed this margin. 10. Minimum distance from left edge of message to right edge of sign panel. Messages shall not exceed this margin. 11. Minimum distance from right edge of message to right edge of sign panel. Messages shall not exceed this margin.

1 1/ 4"

Fusce magna sem, gravida inmollis ultrices justo

1 1/ 8"

Quisque ipsum nibh, ullamcorper Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam molli lum nunc

1/4" 3/4"

•

Arcu, eleifend sit amet, gravida eget

7. Bulleted Items. Flush left alignment.

P12

Graphic Detail - Type R4 Scale: 1 1/2”=1’-0”

2 1/2" 1"

1 /2 "

Arcu, eleifend sit amet, gravida eget

2 1/ 2 " 2 1 / 4 " 1 1 / 8"

•

2 1 / 2"

Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus.

1 3/ 8"

3/4"

Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Etiam sem

•

1 3/ 8" 1 3/ 8" 1 1/ 8"

Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. Sed vitae tellus. Etiam sem

6. Primary or introductory message. Flush left alignment.

3/4"

2 5/ 8" 1 5/ 8" 1 3/ 8"

1 1/ 8"

V2 6

3 3/ 8"

10"

4 1/ 2"

2 1/ 8"

Dankwardt Memorial Park

3" 3"

P12

Graphic Detail - Type R3 Scale: 1 1/2”=1’-0”

Graphics | R3, R4

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.8

S PE C I FI CAT I O N S 1. Distance from left edge of sign panel to arrow. 1

2. Measurement of arrow’s width and height.

3. Distance from right edge of arrow panel to left edge of message.

5" 5" 4"

4. Minimum distance from left edge of message to right edge of sign panel. Messages shall not exceed this margin.

5. Distance from bottom edge of signature band to top edge of message. 9"

6. Distance from message baseline to top edge of dividing bar.

11 1/2"

Message Xxxxxxxx

Rec Plex

6 3 /4 "

Message Xxxxxxxx

6 1/2" 5" 6 5/8" 6 5/8"

Message Xxxxxxxx

7. Distance from bottom edge of dividing bar to top edge of capital letter.

P13

8. Distance between the baselines of multiple messages that share a common arrow.

10. Minimum distance from top edge of bottom band to baseline of lowest message. Messages shall not exceed this margin.

Hospital 8

Mall

9. Distance between the baselines of multiple lines of a single message.

P10

11. Signature band. Painted with Matthews exterior polyurethane. 12. Greater Burlington signature. Screen printed. Graphics centered on panel. 13. Panel background. Painted with Matthews exterior polyurethane.

5" 8"

Double line Message Xxxxxxxx

14. Dividing band. Painted with Matthews exterior polyurethane.

Graphic Detail - Type V2

15. Message graphics. Applied exterior grade reflective vinyl.

Scale: 1/2”=1’-0”

16. Message length is limited to 16 characters including spaces as long as it does not invade the 5” margin.

* Message formatting, with the exception of panel size shown in drawing 1, applies to all V1, V2 and V3 signs.

Message Formatting - Type V1*

To Roosevelt Ave 1.4 mi

Scale: 1/2”=1’-0”

Graphic Detail - Type V3 Scale: 1/2”=1’-0”

Graphics | V1, V2, V3

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.9

S PE C I FI CAT I O N S 1. Distance from left edge of sign panel to arrow.

4" 4" 3"

2. Measurement of arrow’s width and height.

3. Distance from right edge of arrow panel to left edge of message.

4. Minimum distance from left edge of message to right edge of sign panel. Messages shall not exceed this margin.

P13

5. Distance from bottom edge of signature band to top edge of message.

P10

6. Distance from message baseline to top edge of dividing bar. 7. Distance from bottom edge of dividing bar to top edge of capital letter.

P13

9. Distance between the baselines of multiple lines of a single message. 10. Minimum distance from top edge of bottom band to baseline of lowest message. Messages shall not exceed this margin.

7 8

Auditorium

Parking

P10

4" 6"

Double Line Message Xxxxxxxx

Message Xxxxxxxx

Welcome Center

6 5/8"

Message Xxxxxxxx

5" 4" 5 3/8" 5 3/8"

Message Xxxxxxxx

8. Distance between the baselines of multiple messages that share a common arrow.

15. Message graphics. Applied exterior grade reflective vinyl.

7" 2 1/2"

Graphic Detail - Type V5 Scale: 1/2”=1’-0”

16. Message length is limited to 16 characters including spaces as long as it does not invade the 4” margin. 17. Downtown identity message. Applied exterior grade reflective vinyl. Graphics centered on panel. 18. Downtown identity arch. Contour cut.

Message Formatting - Type V4*

* Message formatting, with the exception of panel size shown in drawing 1, applies to all V4, V5 and V6 signs.

Scale: 1/2”=1’-0”

Snake Alley Vehicle Entrance

Graphic Detail - Type V6 Scale: 1/2”=1’-0”

Graphics | V4, V5, V6

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

5.10

6 | Placement Guidelines

S PE C I FI CAT I O N S 1. The inside edge of the sign panel must not invade the corresponding highway right-of-way. Fabricator shall verify right-of-way demarcations for all sign locations.

2. Sign Panel 3. Maintain 7’-0” from street grade to bottom of vehicular guide signs. In regions where snow plows require exceptional clearance, verify compliance requirements with the governing transportation authority. 4. Street / hwy shoulder (beginning of regulated right-of-way or set-back) 5. Grade

6. Concrete footer 7. Concrete footer must never exceed more than 4” above grade to comply with regulated break-away systems. Multiple poles may be staggered in length. 8. Variable height from grade

3 8 5 6

Shoulder / Right of Way Scale: NS

Placement Guidelines | Alignment

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

6.1

S PE C I FI CAT I O N S 1. The distance from the curb to the outside edge of the sign panel must be no less than 1’-0”. 2. The distance from the edge of the sign panel nearest to a building or projected element must be no less than 2’-0”. 3. The front view of a vehicular guide must not obstruct its entrance or an adjacent store’s identity.

4. If pedestrian traffic is only accessible between the outside edge of the vehicular guide post and the curb, the unobstructed path must be no less than 4’-0” .

5. If pedestrian traffic is only accessible between the inside edge of the vehicular guide post and adjacent structures including open doors, the unobstructed path must be no less than 4’-0” . 6. The distance from the back of the vehicular guide to the nearest utility pole must not be less than 10’-0” or the distance mandated by local code. 7. The distance from the front of the vehicular guide to the nearest tree or utility pole must not be less than 15’-0”. 8. Maintain 7’-0” from grade to bottom of vehicular guide signs. In regions where snow plows require exceptional clearance, verify compliance requirements with the governing transportation authority.

IDENTITY SIGN

Perpendicular to Curb Scale: NS

Placement Guidelines | Alignment

Parallel to Curb Scale: NS

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

6.2

S PE C I FI CAT I O N S 1. En route decision point

2. Destination arrival decision point 3. Vehicular guide signs may be placed on the driver’s right side of the street between 100 and 200 feet before an in-route decision point. If a speed limit is more than 50 mph, vehicular guide signs should be placed between 150 to 300 feet before an in-route decision point. 4. If a second vehicular guide sign is required before an en route decision point, it may be placed no closer than 50 feet to the following sign. 100 feet is optimal.

5. Destination

1 3 8 4

7. A vehicular guide sign may be placed no closer that 50 feet from a preceding decision point or intersection. 100 feet is optimal. 8. In conditions where the driver’s right side of the street is not conducive for sign placement and a street is divided by a median that is wider than the width of a proposed sign and is not populated with visual barriers or is within the opposing traffic’s line of site, guide signs may be placed on the driver’s left side in the median. Distance from decision points as indicated in drawing 1 still apply.

5 2

9. In conditions where neither the driver’s right or left side of the street is conducive for sign placement and the associated decision point occurs at a “T” intersection, guide signs may be placed on the far side of intersecting street as long as they do not conflict with existing signage, signal lights, store frontage or other critical visual devices. NOTE: The placement distance between a vehicular guide sign and a decision point may very depending on actual speed, number of lanes, congestion and competing visual elements and obstructions. Final sign placement should be verified upon field study of existing conditions. Consult with the local transportation authority for compliance requirements.

2 1

6. Vehicular guide signs may be placed on the driver’s right side of the street between 50 and 100 feet before a destination arrival decision point. If a speed limit is more than 50 mph, vehicular guide signs should be placed between 100 to 150 feet before a destination arrival decision point.

Vehicular Guide Sign Placement - Left Side of Street Scale: NS

Vehicular Guide Placement - Right Side of Street

Scale: NS

Placement Guidelines | Vehicular Guides

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

6.3

S PE C I FI CAT I O N S 11. To come...

Placement Guidelines | Xxxx

City of Burlington Wayfinding Program | Design Intent | September 18, 2015

6.4